dma: mpc512x: reorder mpc8308 specific instructions
Concentrate the specific code for MPC8308 in the 'if' branch
and handle MPC512x in the 'else' branch.
This modification only reorders instructions but doesn't change behaviour.
Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 448750d..2ce248b 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -52,9 +52,17 @@
#define MPC_DMA_DESCRIPTORS 64
/* Macro definitions */
-#define MPC_DMA_CHANNELS 64
#define MPC_DMA_TCD_OFFSET 0x1000
+/*
+ * Maximum channel counts for individual hardware variants
+ * and the maximum channel count over all supported controllers,
+ * used for data structure size
+ */
+#define MPC8308_DMACHAN_MAX 16
+#define MPC512x_DMACHAN_MAX 64
+#define MPC_DMA_CHANNELS 64
+
/* Arbitration mode of group and channel */
#define MPC_DMA_DMACR_EDCG (1 << 31)
#define MPC_DMA_DMACR_ERGA (1 << 3)
@@ -710,10 +718,10 @@
dma = &mdma->dma;
dma->dev = dev;
- if (!mdma->is_mpc8308)
- dma->chancnt = MPC_DMA_CHANNELS;
+ if (mdma->is_mpc8308)
+ dma->chancnt = MPC8308_DMACHAN_MAX;
else
- dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */
+ dma->chancnt = MPC512x_DMACHAN_MAX;
dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources;
dma->device_free_chan_resources = mpc_dma_free_chan_resources;
dma->device_issue_pending = mpc_dma_issue_pending;
@@ -747,7 +755,19 @@
* - Round-robin group arbitration,
* - Round-robin channel arbitration.
*/
- if (!mdma->is_mpc8308) {
+ if (mdma->is_mpc8308) {
+ /* MPC8308 has 16 channels and lacks some registers */
+ out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
+
+ /* enable snooping */
+ out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
+ /* Disable error interrupts */
+ out_be32(&mdma->regs->dmaeeil, 0);
+
+ /* Clear interrupts status */
+ out_be32(&mdma->regs->dmaintl, 0xFFFF);
+ out_be32(&mdma->regs->dmaerrl, 0xFFFF);
+ } else {
out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG |
MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA);
@@ -768,18 +788,6 @@
/* Route interrupts to IPIC */
out_be32(&mdma->regs->dmaihsa, 0);
out_be32(&mdma->regs->dmailsa, 0);
- } else {
- /* MPC8308 has 16 channels and lacks some registers */
- out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
-
- /* enable snooping */
- out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
- /* Disable error interrupts */
- out_be32(&mdma->regs->dmaeeil, 0);
-
- /* Clear interrupts status */
- out_be32(&mdma->regs->dmaintl, 0xFFFF);
- out_be32(&mdma->regs->dmaerrl, 0xFFFF);
}
/* Register DMA engine */