| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| }; |
| |
| tzic: tz-interrupt-controller@e0000000 { |
| compatible = "fsl,imx51-tzic", "fsl,tzic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0xe0000000 0x4000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fsl,imx-ckil", "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| ckih1 { |
| compatible = "fsl,imx-ckih1", "fixed-clock"; |
| clock-frequency = <22579200>; |
| }; |
| |
| ckih2 { |
| compatible = "fsl,imx-ckih2", "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&tzic>; |
| ranges; |
| |
| aips@70000000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x10000000>; |
| ranges; |
| |
| spba@70000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x70000000 0x40000>; |
| ranges; |
| |
| esdhc@70004000 { /* ESDHC1 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70004000 0x4000>; |
| interrupts = <1>; |
| status = "disabled"; |
| }; |
| |
| esdhc@70008000 { /* ESDHC2 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70008000 0x4000>; |
| interrupts = <2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@7000c000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x7000c000 0x4000>; |
| interrupts = <33>; |
| status = "disabled"; |
| }; |
| |
| ecspi@70010000 { /* ECSPI1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x70010000 0x4000>; |
| interrupts = <36>; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@70014000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x70014000 0x4000>; |
| interrupts = <30>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| esdhc@70020000 { /* ESDHC3 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70020000 0x4000>; |
| interrupts = <3>; |
| status = "disabled"; |
| }; |
| |
| esdhc@70024000 { /* ESDHC4 */ |
| compatible = "fsl,imx51-esdhc"; |
| reg = <0x70024000 0x4000>; |
| interrupts = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb@73f80000 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80000 0x0200>; |
| interrupts = <18>; |
| status = "disabled"; |
| }; |
| |
| usb@73f80200 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80200 0x0200>; |
| interrupts = <14>; |
| status = "disabled"; |
| }; |
| |
| usb@73f80400 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80400 0x0200>; |
| interrupts = <16>; |
| status = "disabled"; |
| }; |
| |
| usb@73f80600 { |
| compatible = "fsl,imx51-usb", "fsl,imx27-usb"; |
| reg = <0x73f80600 0x0200>; |
| interrupts = <17>; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@73f84000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f84000 0x4000>; |
| interrupts = <50 51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@73f88000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f88000 0x4000>; |
| interrupts = <52 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@73f8c000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f8c000 0x4000>; |
| interrupts = <54 55>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@73f90000 { |
| compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; |
| reg = <0x73f90000 0x4000>; |
| interrupts = <56 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wdog@73f98000 { /* WDOG1 */ |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f98000 0x4000>; |
| interrupts = <58>; |
| }; |
| |
| wdog@73f9c000 { /* WDOG2 */ |
| compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; |
| reg = <0x73f9c000 0x4000>; |
| interrupts = <59>; |
| status = "disabled"; |
| }; |
| |
| iomuxc@73fa8000 { |
| compatible = "fsl,imx51-iomuxc"; |
| reg = <0x73fa8000 0x4000>; |
| |
| audmux { |
| pinctrl_audmux_1: audmuxgrp-1 { |
| fsl,pins = < |
| 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ |
| 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ |
| 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ |
| 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ |
| >; |
| }; |
| }; |
| |
| fec { |
| pinctrl_fec_1: fecgrp-1 { |
| fsl,pins = < |
| 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ |
| 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ |
| 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ |
| 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ |
| 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ |
| 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ |
| 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ |
| 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ |
| 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ |
| 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ |
| 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ |
| 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ |
| 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ |
| 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ |
| 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ |
| 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ |
| 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ |
| >; |
| }; |
| }; |
| |
| ecspi1 { |
| pinctrl_ecspi1_1: ecspi1grp-1 { |
| fsl,pins = < |
| 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ |
| 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ |
| 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ |
| >; |
| }; |
| }; |
| |
| esdhc1 { |
| pinctrl_esdhc1_1: esdhc1grp-1 { |
| fsl,pins = < |
| 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ |
| 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ |
| 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ |
| 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ |
| 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ |
| 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ |
| >; |
| }; |
| }; |
| |
| esdhc2 { |
| pinctrl_esdhc2_1: esdhc2grp-1 { |
| fsl,pins = < |
| 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ |
| 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ |
| 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ |
| 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ |
| 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ |
| 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ |
| >; |
| }; |
| }; |
| |
| i2c2 { |
| pinctrl_i2c2_1: i2c2grp-1 { |
| fsl,pins = < |
| 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ |
| 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ |
| >; |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1_1: uart1grp-1 { |
| fsl,pins = < |
| 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ |
| 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ |
| 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ |
| 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ |
| >; |
| }; |
| }; |
| |
| uart2 { |
| pinctrl_uart2_1: uart2grp-1 { |
| fsl,pins = < |
| 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ |
| 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ |
| >; |
| }; |
| }; |
| |
| uart3 { |
| pinctrl_uart3_1: uart3grp-1 { |
| fsl,pins = < |
| 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ |
| 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ |
| 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ |
| 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ |
| >; |
| }; |
| }; |
| }; |
| |
| uart1: serial@73fbc000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fbc000 0x4000>; |
| interrupts = <31>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@73fc0000 { |
| compatible = "fsl,imx51-uart", "fsl,imx21-uart"; |
| reg = <0x73fc0000 0x4000>; |
| interrupts = <32>; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips@80000000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x10000000>; |
| ranges; |
| |
| ecspi@83fac000 { /* ECSPI2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-ecspi"; |
| reg = <0x83fac000 0x4000>; |
| interrupts = <37>; |
| status = "disabled"; |
| }; |
| |
| sdma@83fb0000 { |
| compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; |
| reg = <0x83fb0000 0x4000>; |
| interrupts = <6>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; |
| }; |
| |
| cspi@83fc0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; |
| reg = <0x83fc0000 0x4000>; |
| interrupts = <38>; |
| status = "disabled"; |
| }; |
| |
| i2c@83fc4000 { /* I2C2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; |
| reg = <0x83fc4000 0x4000>; |
| interrupts = <63>; |
| status = "disabled"; |
| }; |
| |
| i2c@83fc8000 { /* I2C1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; |
| reg = <0x83fc8000 0x4000>; |
| interrupts = <62>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@83fcc000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fcc000 0x4000>; |
| interrupts = <29>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| audmux@83fd0000 { |
| compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; |
| reg = <0x83fd0000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| nand@83fdb000 { |
| compatible = "fsl,imx51-nand"; |
| reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; |
| interrupts = <8>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@83fe8000 { |
| compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; |
| reg = <0x83fe8000 0x4000>; |
| interrupts = <96>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| ethernet@83fec000 { |
| compatible = "fsl,imx51-fec", "fsl,imx27-fec"; |
| reg = <0x83fec000 0x4000>; |
| interrupts = <87>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |