| * Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC) |
| |
| Required properties: |
| - compatible : Should be "fsl,mc13783" or "fsl,mc13892" |
| |
| Optional properties: |
| - fsl,mc13xxx-uses-adc : Indicate the ADC is being used |
| - fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used |
| - fsl,mc13xxx-uses-rtc : Indicate the RTC is being used |
| - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used |
| |
| Sub-nodes: |
| - leds : Contain the led nodes and initial register values in property |
| "led-control". Number of register depends of used IC, for MC13783 is 6, |
| for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of |
| these registers. |
| - #address-cells: Must be 1. |
| - #size-cells: Must be 0. |
| Each led node should contain "reg", which used as LED ID (described below). |
| Optional properties "label" and "linux,default-trigger" is described in |
| Documentation/devicetree/bindings/leds/common.txt. |
| - regulators : Contain the regulator nodes. The regulators are bound using |
| their names as listed below with their registers and bits for enabling. |
| |
| MC13783 LED IDs: |
| 0 : Main display |
| 1 : AUX display |
| 2 : Keypad |
| 3 : Red 1 |
| 4 : Green 1 |
| 5 : Blue 1 |
| 6 : Red 2 |
| 7 : Green 2 |
| 8 : Blue 2 |
| 9 : Red 3 |
| 10 : Green 3 |
| 11 : Blue 3 |
| |
| MC13892 LED IDs: |
| 0 : Main display |
| 1 : AUX display |
| 2 : Keypad |
| 3 : Red |
| 4 : Green |
| 5 : Blue |
| |
| MC34708 LED IDs: |
| 0 : Charger Red |
| 1 : Charger Green |
| |
| MC13783 regulators: |
| sw1a : regulator SW1A (register 24, bit 0) |
| sw1b : regulator SW1B (register 25, bit 0) |
| sw2a : regulator SW2A (register 26, bit 0) |
| sw2b : regulator SW2B (register 27, bit 0) |
| sw3 : regulator SW3 (register 29, bit 20) |
| vaudio : regulator VAUDIO (register 32, bit 0) |
| viohi : regulator VIOHI (register 32, bit 3) |
| violo : regulator VIOLO (register 32, bit 6) |
| vdig : regulator VDIG (register 32, bit 9) |
| vgen : regulator VGEN (register 32, bit 12) |
| vrfdig : regulator VRFDIG (register 32, bit 15) |
| vrfref : regulator VRFREF (register 32, bit 18) |
| vrfcp : regulator VRFCP (register 32, bit 21) |
| vsim : regulator VSIM (register 33, bit 0) |
| vesim : regulator VESIM (register 33, bit 3) |
| vcam : regulator VCAM (register 33, bit 6) |
| vrfbg : regulator VRFBG (register 33, bit 9) |
| vvib : regulator VVIB (register 33, bit 11) |
| vrf1 : regulator VRF1 (register 33, bit 12) |
| vrf2 : regulator VRF2 (register 33, bit 15) |
| vmmc1 : regulator VMMC1 (register 33, bit 18) |
| vmmc2 : regulator VMMC2 (register 33, bit 21) |
| gpo1 : regulator GPO1 (register 34, bit 6) |
| gpo2 : regulator GPO2 (register 34, bit 8) |
| gpo3 : regulator GPO3 (register 34, bit 10) |
| gpo4 : regulator GPO4 (register 34, bit 12) |
| pwgt1spi : regulator PWGT1SPI (register 34, bit 15) |
| pwgt2spi : regulator PWGT2SPI (register 34, bit 16) |
| |
| MC13892 regulators: |
| vcoincell : regulator VCOINCELL (register 13, bit 23) |
| sw1 : regulator SW1 (register 24, bit 0) |
| sw2 : regulator SW2 (register 25, bit 0) |
| sw3 : regulator SW3 (register 26, bit 0) |
| sw4 : regulator SW4 (register 27, bit 0) |
| swbst : regulator SWBST (register 29, bit 20) |
| vgen1 : regulator VGEN1 (register 32, bit 0) |
| viohi : regulator VIOHI (register 32, bit 3) |
| vdig : regulator VDIG (register 32, bit 9) |
| vgen2 : regulator VGEN2 (register 32, bit 12) |
| vpll : regulator VPLL (register 32, bit 15) |
| vusb2 : regulator VUSB2 (register 32, bit 18) |
| vgen3 : regulator VGEN3 (register 33, bit 0) |
| vcam : regulator VCAM (register 33, bit 6) |
| vvideo : regulator VVIDEO (register 33, bit 12) |
| vaudio : regulator VAUDIO (register 33, bit 15) |
| vsd : regulator VSD (register 33, bit 18) |
| gpo1 : regulator GPO1 (register 34, bit 6) |
| gpo2 : regulator GPO2 (register 34, bit 8) |
| gpo3 : regulator GPO3 (register 34, bit 10) |
| gpo4 : regulator GPO4 (register 34, bit 12) |
| pwgt1spi : regulator PWGT1SPI (register 34, bit 15) |
| pwgt2spi : regulator PWGT2SPI (register 34, bit 16) |
| vusb : regulator VUSB (register 50, bit 3) |
| |
| The bindings details of individual regulator device can be found in: |
| Documentation/devicetree/bindings/regulator/regulator.txt |
| |
| Examples: |
| |
| ecspi@70010000 { /* ECSPI1 */ |
| fsl,spi-num-chipselects = <2>; |
| cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ |
| <&gpio4 25 0>; /* GPIO4_25 */ |
| status = "okay"; |
| |
| pmic: mc13892@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,mc13892"; |
| spi-max-frequency = <6000000>; |
| reg = <0>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <8>; |
| |
| leds { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| led-control = <0x000 0x000 0x0e0 0x000>; |
| |
| sysled { |
| reg = <3>; |
| label = "system:red:live"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| regulators { |
| sw1_reg: mc13892__sw1 { |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1375000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw2_reg: mc13892__sw2 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |