drivers/hwmon/emc6w201.c - kernel/msm-4.9 - Gitiles

 /*
  * emc6w201.c - Hardware monitoring driver for the SMSC EMC6W201
  * Copyright (C) 2011  Jean Delvare <khali@linux-fr.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>

 /*
  * Addresses to scan
  */

 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };

 /*
  * The EMC6W201 registers
  */

 #define EMC6W201_REG_IN(nr)		(0x20 + (nr))
 #define EMC6W201_REG_TEMP(nr)		(0x26 + (nr))
 #define EMC6W201_REG_FAN(nr)		(0x2C + (nr) * 2)
 #define EMC6W201_REG_COMPANY		0x3E
 #define EMC6W201_REG_VERSTEP		0x3F
 #define EMC6W201_REG_CONFIG		0x40
 #define EMC6W201_REG_IN_LOW(nr)		(0x4A + (nr) * 2)
 #define EMC6W201_REG_IN_HIGH(nr)	(0x4B + (nr) * 2)
 #define EMC6W201_REG_TEMP_LOW(nr)	(0x56 + (nr) * 2)
 #define EMC6W201_REG_TEMP_HIGH(nr)	(0x57 + (nr) * 2)
 #define EMC6W201_REG_FAN_MIN(nr)	(0x62 + (nr) * 2)

 enum { input, min, max } subfeature;

 /*
  * Per-device data
  */

 struct emc6w201_data {
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid; /* zero until following fields are valid */
 	unsigned long last_updated; /* in jiffies */

 	/* registers values */
 	u8 in[3][6];
 	s8 temp[3][6];
 	u16 fan[2][5];
 };

 /*
  * Combine LSB and MSB registers in a single value
  * Locking: must be called with data->update_lock held
  */
 static u16 emc6w201_read16(struct i2c_client *client, u8 reg)
 {
 	int lsb, msb;

 	lsb = i2c_smbus_read_byte_data(client, reg);
 	msb = i2c_smbus_read_byte_data(client, reg + 1);
 	if (unlikely(lsb < 0 || msb < 0)) {
 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
 			16, "read", reg);
 		return 0xFFFF;	/* Arbitrary value */
 	}

 	return (msb << 8) | lsb;
 }

 /*
  * Write 16-bit value to LSB and MSB registers
  * Locking: must be called with data->update_lock held
  */
 static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val)
 {
 	int err;

 	err = i2c_smbus_write_byte_data(client, reg, val & 0xff);
 	if (likely(!err))
 		err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
 	if (unlikely(err < 0))
 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
 			16, "write", reg);

 	return err;
 }

 /* Read 8-bit value from register */
 static u8 emc6w201_read8(struct i2c_client *client, u8 reg)
 {
 	int val;

 	val = i2c_smbus_read_byte_data(client, reg);
 	if (unlikely(val < 0)) {
 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
 			8, "read", reg);
 		return 0x00;	/* Arbitrary value */
 	}

 	return val;
 }

 /* Write 8-bit value to register */
 static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val)
 {
 	int err;

 	err = i2c_smbus_write_byte_data(client, reg, val);
 	if (unlikely(err < 0))
 		dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
 			8, "write", reg);

 	return err;
 }

 static struct emc6w201_data *emc6w201_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct emc6w201_data *data = i2c_get_clientdata(client);
 	int nr;

 	mutex_lock(&data->update_lock);

 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 		for (nr = 0; nr < 6; nr++) {
 			data->in[input][nr] =
 				emc6w201_read8(client,
 						EMC6W201_REG_IN(nr));
 			data->in[min][nr] =
 				emc6w201_read8(client,
 						EMC6W201_REG_IN_LOW(nr));
 			data->in[max][nr] =
 				emc6w201_read8(client,
 						EMC6W201_REG_IN_HIGH(nr));
 		}

 		for (nr = 0; nr < 6; nr++) {
 			data->temp[input][nr] =
 				emc6w201_read8(client,
 						EMC6W201_REG_TEMP(nr));
 			data->temp[min][nr] =
 				emc6w201_read8(client,
 						EMC6W201_REG_TEMP_LOW(nr));
 			data->temp[max][nr] =
 				emc6w201_read8(client,
 						EMC6W201_REG_TEMP_HIGH(nr));
 		}

 		for (nr = 0; nr < 5; nr++) {
 			data->fan[input][nr] =
 				emc6w201_read16(client,
 						EMC6W201_REG_FAN(nr));
 			data->fan[min][nr] =
 				emc6w201_read16(client,
 						EMC6W201_REG_FAN_MIN(nr));
 		}

 		data->last_updated = jiffies;
 		data->valid = 1;
 	}

 	mutex_unlock(&data->update_lock);

 	return data;
 }

 /*
  * Sysfs callback functions
  */

 static const u16 nominal_mv[6] = { 2500, 1500, 3300, 5000, 1500, 1500 };

 static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
 	char *buf)
 {
 	struct emc6w201_data *data = emc6w201_update_device(dev);
 	int sf = to_sensor_dev_attr_2(devattr)->index;
 	int nr = to_sensor_dev_attr_2(devattr)->nr;

 	return sprintf(buf, "%u\n",
 		       (unsigned)data->in[sf][nr] * nominal_mv[nr] / 0xC0);
 }

 static ssize_t set_in(struct device *dev, struct device_attribute *devattr,
 		      const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct emc6w201_data *data = i2c_get_clientdata(client);
 	int sf = to_sensor_dev_attr_2(devattr)->index;
 	int nr = to_sensor_dev_attr_2(devattr)->nr;
 	int err;
 	long val;
 	u8 reg;

 	err = kstrtol(buf, 10, &val);
 	if (err < 0)
 		return err;

 	val = DIV_ROUND_CLOSEST(val * 0xC0, nominal_mv[nr]);
 	reg = (sf == min) ? EMC6W201_REG_IN_LOW(nr)
 			  : EMC6W201_REG_IN_HIGH(nr);

 	mutex_lock(&data->update_lock);
 	data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255);
 	err = emc6w201_write8(client, reg, data->in[sf][nr]);
 	mutex_unlock(&data->update_lock);

 	return err < 0 ? err : count;
 }

 static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 	char *buf)
 {
 	struct emc6w201_data *data = emc6w201_update_device(dev);
 	int sf = to_sensor_dev_attr_2(devattr)->index;
 	int nr = to_sensor_dev_attr_2(devattr)->nr;

 	return sprintf(buf, "%d\n", (int)data->temp[sf][nr] * 1000);
 }

 static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
 			const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct emc6w201_data *data = i2c_get_clientdata(client);
 	int sf = to_sensor_dev_attr_2(devattr)->index;
 	int nr = to_sensor_dev_attr_2(devattr)->nr;
 	int err;
 	long val;
 	u8 reg;

 	err = kstrtol(buf, 10, &val);
 	if (err < 0)
 		return err;

 	val /= 1000;
 	reg = (sf == min) ? EMC6W201_REG_TEMP_LOW(nr)
 			  : EMC6W201_REG_TEMP_HIGH(nr);

 	mutex_lock(&data->update_lock);
 	data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128);
 	err = emc6w201_write8(client, reg, data->temp[sf][nr]);
 	mutex_unlock(&data->update_lock);

 	return err < 0 ? err : count;
 }

 static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
 	char *buf)
 {
 	struct emc6w201_data *data = emc6w201_update_device(dev);
 	int sf = to_sensor_dev_attr_2(devattr)->index;
 	int nr = to_sensor_dev_attr_2(devattr)->nr;
 	unsigned rpm;

 	if (data->fan[sf][nr] == 0 || data->fan[sf][nr] == 0xFFFF)
 		rpm = 0;
 	else
 		rpm = 5400000U / data->fan[sf][nr];

 	return sprintf(buf, "%u\n", rpm);
 }

 static ssize_t set_fan(struct device *dev, struct device_attribute *devattr,
 		       const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct emc6w201_data *data = i2c_get_clientdata(client);
 	int sf = to_sensor_dev_attr_2(devattr)->index;
 	int nr = to_sensor_dev_attr_2(devattr)->nr;
 	int err;
 	unsigned long val;

 	err = kstrtoul(buf, 10, &val);
 	if (err < 0)
 		return err;

 	if (val == 0) {
 		val = 0xFFFF;
 	} else {
 		val = DIV_ROUND_CLOSEST(5400000U, val);
 		val = SENSORS_LIMIT(val, 0, 0xFFFE);
 	}

 	mutex_lock(&data->update_lock);
 	data->fan[sf][nr] = val;
 	err = emc6w201_write16(client, EMC6W201_REG_FAN_MIN(nr),
 			       data->fan[sf][nr]);
 	mutex_unlock(&data->update_lock);

 	return err < 0 ? err : count;
 }

 static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, input);
 static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in,
 			    0, min);
 static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in,
 			    0, max);
 static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, input);
 static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in,
 			    1, min);
 static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in,
 			    1, max);
 static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, input);
 static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in,
 			    2, min);
 static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in,
 			    2, max);
 static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, input);
 static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in,
 			    3, min);
 static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in,
 			    3, max);
 static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, input);
 static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in,
 			    4, min);
 static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in,
 			    4, max);
 static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, input);
 static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in,
 			    5, min);
 static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in,
 			    5, max);

 static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, input);
 static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    0, min);
 static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    0, max);
 static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, input);
 static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    1, min);
 static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    1, max);
 static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, input);
 static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    2, min);
 static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    2, max);
 static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, input);
 static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    3, min);
 static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    3, max);
 static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, input);
 static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    4, min);
 static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    4, max);
 static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, input);
 static SENSOR_DEVICE_ATTR_2(temp6_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    5, min);
 static SENSOR_DEVICE_ATTR_2(temp6_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
 			    5, max);

 static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, input);
 static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
 			    0, min);
 static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, input);
 static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
 			    1, min);
 static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, input);
 static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
 			    2, min);
 static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, input);
 static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
 			    3, min);
 static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, input);
 static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
 			    4, min);

 static struct attribute *emc6w201_attributes[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_min.dev_attr.attr,
 	&sensor_dev_attr_in0_max.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_min.dev_attr.attr,
 	&sensor_dev_attr_in1_max.dev_attr.attr,
 	&sensor_dev_attr_in2_input.dev_attr.attr,
 	&sensor_dev_attr_in2_min.dev_attr.attr,
 	&sensor_dev_attr_in2_max.dev_attr.attr,
 	&sensor_dev_attr_in3_input.dev_attr.attr,
 	&sensor_dev_attr_in3_min.dev_attr.attr,
 	&sensor_dev_attr_in3_max.dev_attr.attr,
 	&sensor_dev_attr_in4_input.dev_attr.attr,
 	&sensor_dev_attr_in4_min.dev_attr.attr,
 	&sensor_dev_attr_in4_max.dev_attr.attr,
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 	&sensor_dev_attr_in5_min.dev_attr.attr,
 	&sensor_dev_attr_in5_max.dev_attr.attr,

 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_min.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_max.dev_attr.attr,
 	&sensor_dev_attr_temp3_input.dev_attr.attr,
 	&sensor_dev_attr_temp3_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_max.dev_attr.attr,
 	&sensor_dev_attr_temp4_input.dev_attr.attr,
 	&sensor_dev_attr_temp4_min.dev_attr.attr,
 	&sensor_dev_attr_temp4_max.dev_attr.attr,
 	&sensor_dev_attr_temp5_input.dev_attr.attr,
 	&sensor_dev_attr_temp5_min.dev_attr.attr,
 	&sensor_dev_attr_temp5_max.dev_attr.attr,
 	&sensor_dev_attr_temp6_input.dev_attr.attr,
 	&sensor_dev_attr_temp6_min.dev_attr.attr,
 	&sensor_dev_attr_temp6_max.dev_attr.attr,

 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_min.dev_attr.attr,
 	&sensor_dev_attr_fan4_input.dev_attr.attr,
 	&sensor_dev_attr_fan4_min.dev_attr.attr,
 	&sensor_dev_attr_fan5_input.dev_attr.attr,
 	&sensor_dev_attr_fan5_min.dev_attr.attr,
 	NULL
 };

 static const struct attribute_group emc6w201_group = {
 	.attrs = emc6w201_attributes,
 };

 /*
  * Driver interface
  */

 /* Return 0 if detection is successful, -ENODEV otherwise */
 static int emc6w201_detect(struct i2c_client *client,
 			   struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	int company, verstep, config;

 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;

 	/* Identification */
 	company = i2c_smbus_read_byte_data(client, EMC6W201_REG_COMPANY);
 	if (company != 0x5C)
 		return -ENODEV;
 	verstep = i2c_smbus_read_byte_data(client, EMC6W201_REG_VERSTEP);
 	if (verstep < 0 || (verstep & 0xF0) != 0xB0)
 		return -ENODEV;
 	if ((verstep & 0x0F) > 2) {
 		dev_dbg(&client->dev, "Unknwown EMC6W201 stepping %d\n",
 			verstep & 0x0F);
 		return -ENODEV;
 	}

 	/* Check configuration */
 	config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG);
 	if (config < 0 || (config & 0xF4) != 0x04)
 		return -ENODEV;
 	if (!(config & 0x01)) {
 		dev_err(&client->dev, "Monitoring not enabled\n");
 		return -ENODEV;
 	}

 	strlcpy(info->type, "emc6w201", I2C_NAME_SIZE);

 	return 0;
 }

 static int emc6w201_probe(struct i2c_client *client,
 			  const struct i2c_device_id *id)
 {
 	struct emc6w201_data *data;
 	int err;

 	data = kzalloc(sizeof(struct emc6w201_data), GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
 		goto exit;
 	}

 	i2c_set_clientdata(client, data);
 	mutex_init(&data->update_lock);

 	/* Create sysfs attribute */
 	err = sysfs_create_group(&client->dev.kobj, &emc6w201_group);
 	if (err)
 		goto exit_free;

 	/* Expose as a hwmon device */
 	data->hwmon_dev = hwmon_device_register(&client->dev);
 	if (IS_ERR(data->hwmon_dev)) {
 		err = PTR_ERR(data->hwmon_dev);
 		goto exit_remove;
 	}

 	return 0;

  exit_remove:
 	sysfs_remove_group(&client->dev.kobj, &emc6w201_group);
  exit_free:
 	kfree(data);
  exit:
 	return err;
 }

 static int emc6w201_remove(struct i2c_client *client)
 {
 	struct emc6w201_data *data = i2c_get_clientdata(client);

 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &emc6w201_group);
 	kfree(data);

 	return 0;
 }

 static const struct i2c_device_id emc6w201_id[] = {
 	{ "emc6w201", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, emc6w201_id);

 static struct i2c_driver emc6w201_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "emc6w201",
 	},
 	.probe		= emc6w201_probe,
 	.remove		= emc6w201_remove,
 	.id_table	= emc6w201_id,
 	.detect		= emc6w201_detect,
 	.address_list	= normal_i2c,
 };

 static int __init sensors_emc6w201_init(void)
 {
 	return i2c_add_driver(&emc6w201_driver);
 }
 module_init(sensors_emc6w201_init);

 static void __exit sensors_emc6w201_exit(void)
 {
 	i2c_del_driver(&emc6w201_driver);
 }
 module_exit(sensors_emc6w201_exit);

 MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("SMSC EMC6W201 hardware monitoring driver");
 MODULE_LICENSE("GPL");
	/*
	* emc6w201.c - Hardware monitoring driver for the SMSC EMC6W201
	* Copyright (C) 2011 Jean Delvare <khali@linux-fr.org>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#include <linux/module.h>
	#include <linux/delay.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/jiffies.h>
	#include <linux/i2c.h>
	#include <linux/hwmon.h>
	#include <linux/hwmon-sysfs.h>
	#include <linux/err.h>
	#include <linux/mutex.h>

	/*
	* Addresses to scan
	*/

	static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };

	/*
	* The EMC6W201 registers
	*/

	#define EMC6W201_REG_IN(nr) (0x20 + (nr))
	#define EMC6W201_REG_TEMP(nr) (0x26 + (nr))
	#define EMC6W201_REG_FAN(nr) (0x2C + (nr) * 2)
	#define EMC6W201_REG_COMPANY 0x3E
	#define EMC6W201_REG_VERSTEP 0x3F
	#define EMC6W201_REG_CONFIG 0x40
	#define EMC6W201_REG_IN_LOW(nr) (0x4A + (nr) * 2)
	#define EMC6W201_REG_IN_HIGH(nr) (0x4B + (nr) * 2)
	#define EMC6W201_REG_TEMP_LOW(nr) (0x56 + (nr) * 2)
	#define EMC6W201_REG_TEMP_HIGH(nr) (0x57 + (nr) * 2)
	#define EMC6W201_REG_FAN_MIN(nr) (0x62 + (nr) * 2)

	enum { input, min, max } subfeature;

	/*
	* Per-device data
	*/

	struct emc6w201_data {
	struct device *hwmon_dev;
	struct mutex update_lock;
	char valid; /* zero until following fields are valid */
	unsigned long last_updated; /* in jiffies */

	/* registers values */
	u8 in[3][6];
	s8 temp[3][6];
	u16 fan[2][5];
	};

	/*
	* Combine LSB and MSB registers in a single value
	* Locking: must be called with data->update_lock held
	*/
	static u16 emc6w201_read16(struct i2c_client *client, u8 reg)
	{
	int lsb, msb;

	lsb = i2c_smbus_read_byte_data(client, reg);
	msb = i2c_smbus_read_byte_data(client, reg + 1);
	if (unlikely(lsb < 0 \|\| msb < 0)) {
	dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
	16, "read", reg);
	return 0xFFFF; /* Arbitrary value */
	}

	return (msb << 8) \| lsb;
	}

	/*
	* Write 16-bit value to LSB and MSB registers
	* Locking: must be called with data->update_lock held
	*/
	static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val)
	{
	int err;

	err = i2c_smbus_write_byte_data(client, reg, val & 0xff);
	if (likely(!err))
	err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
	if (unlikely(err < 0))
	dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
	16, "write", reg);

	return err;
	}

	/* Read 8-bit value from register */
	static u8 emc6w201_read8(struct i2c_client *client, u8 reg)
	{
	int val;

	val = i2c_smbus_read_byte_data(client, reg);
	if (unlikely(val < 0)) {
	dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
	8, "read", reg);
	return 0x00; /* Arbitrary value */
	}

	return val;
	}

	/* Write 8-bit value to register */
	static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val)
	{
	int err;

	err = i2c_smbus_write_byte_data(client, reg, val);
	if (unlikely(err < 0))
	dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
	8, "write", reg);

	return err;
	}

	static struct emc6w201_data emc6w201_update_device(struct device dev)
	{
	struct i2c_client *client = to_i2c_client(dev);
	struct emc6w201_data *data = i2c_get_clientdata(client);
	int nr;

	mutex_lock(&data->update_lock);

	if (time_after(jiffies, data->last_updated + HZ) \|\| !data->valid) {
	for (nr = 0; nr < 6; nr++) {
	data->in[input][nr] =
	emc6w201_read8(client,
	EMC6W201_REG_IN(nr));
	data->in[min][nr] =
	emc6w201_read8(client,
	EMC6W201_REG_IN_LOW(nr));
	data->in[max][nr] =
	emc6w201_read8(client,
	EMC6W201_REG_IN_HIGH(nr));
	}

	for (nr = 0; nr < 6; nr++) {
	data->temp[input][nr] =
	emc6w201_read8(client,
	EMC6W201_REG_TEMP(nr));
	data->temp[min][nr] =
	emc6w201_read8(client,
	EMC6W201_REG_TEMP_LOW(nr));
	data->temp[max][nr] =
	emc6w201_read8(client,
	EMC6W201_REG_TEMP_HIGH(nr));
	}

	for (nr = 0; nr < 5; nr++) {
	data->fan[input][nr] =
	emc6w201_read16(client,
	EMC6W201_REG_FAN(nr));
	data->fan[min][nr] =
	emc6w201_read16(client,
	EMC6W201_REG_FAN_MIN(nr));
	}

	data->last_updated = jiffies;
	data->valid = 1;
	}

	mutex_unlock(&data->update_lock);

	return data;
	}

	/*
	* Sysfs callback functions
	*/

	static const u16 nominal_mv[6] = { 2500, 1500, 3300, 5000, 1500, 1500 };

	static ssize_t show_in(struct device dev, struct device_attribute devattr,
	char *buf)
	{
	struct emc6w201_data *data = emc6w201_update_device(dev);
	int sf = to_sensor_dev_attr_2(devattr)->index;
	int nr = to_sensor_dev_attr_2(devattr)->nr;

	return sprintf(buf, "%u\n",
	(unsigned)data->in[sf][nr] * nominal_mv[nr] / 0xC0);
	}

	static ssize_t set_in(struct device dev, struct device_attribute devattr,
	const char *buf, size_t count)
	{
	struct i2c_client *client = to_i2c_client(dev);
	struct emc6w201_data *data = i2c_get_clientdata(client);
	int sf = to_sensor_dev_attr_2(devattr)->index;
	int nr = to_sensor_dev_attr_2(devattr)->nr;
	int err;
	long val;
	u8 reg;

	err = kstrtol(buf, 10, &val);
	if (err < 0)
	return err;

	val = DIV_ROUND_CLOSEST(val * 0xC0, nominal_mv[nr]);
	reg = (sf == min) ? EMC6W201_REG_IN_LOW(nr)
	: EMC6W201_REG_IN_HIGH(nr);

	mutex_lock(&data->update_lock);
	data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255);
	err = emc6w201_write8(client, reg, data->in[sf][nr]);
	mutex_unlock(&data->update_lock);

	return err < 0 ? err : count;
	}

	static ssize_t show_temp(struct device dev, struct device_attribute devattr,
	char *buf)
	{
	struct emc6w201_data *data = emc6w201_update_device(dev);
	int sf = to_sensor_dev_attr_2(devattr)->index;
	int nr = to_sensor_dev_attr_2(devattr)->nr;

	return sprintf(buf, "%d\n", (int)data->temp[sf][nr] * 1000);
	}

	static ssize_t set_temp(struct device dev, struct device_attribute devattr,
	const char *buf, size_t count)
	{
	struct i2c_client *client = to_i2c_client(dev);
	struct emc6w201_data *data = i2c_get_clientdata(client);
	int sf = to_sensor_dev_attr_2(devattr)->index;
	int nr = to_sensor_dev_attr_2(devattr)->nr;
	int err;
	long val;
	u8 reg;

	err = kstrtol(buf, 10, &val);
	if (err < 0)
	return err;

	val /= 1000;
	reg = (sf == min) ? EMC6W201_REG_TEMP_LOW(nr)
	: EMC6W201_REG_TEMP_HIGH(nr);

	mutex_lock(&data->update_lock);
	data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128);
	err = emc6w201_write8(client, reg, data->temp[sf][nr]);
	mutex_unlock(&data->update_lock);

	return err < 0 ? err : count;
	}

	static ssize_t show_fan(struct device dev, struct device_attribute devattr,
	char *buf)
	{
	struct emc6w201_data *data = emc6w201_update_device(dev);
	int sf = to_sensor_dev_attr_2(devattr)->index;
	int nr = to_sensor_dev_attr_2(devattr)->nr;
	unsigned rpm;

	if (data->fan[sf][nr] == 0 \|\| data->fan[sf][nr] == 0xFFFF)
	rpm = 0;
	else
	rpm = 5400000U / data->fan[sf][nr];

	return sprintf(buf, "%u\n", rpm);
	}

	static ssize_t set_fan(struct device dev, struct device_attribute devattr,
	const char *buf, size_t count)
	{
	struct i2c_client *client = to_i2c_client(dev);
	struct emc6w201_data *data = i2c_get_clientdata(client);
	int sf = to_sensor_dev_attr_2(devattr)->index;
	int nr = to_sensor_dev_attr_2(devattr)->nr;
	int err;
	unsigned long val;

	err = kstrtoul(buf, 10, &val);
	if (err < 0)
	return err;

	if (val == 0) {
	val = 0xFFFF;
	} else {
	val = DIV_ROUND_CLOSEST(5400000U, val);
	val = SENSORS_LIMIT(val, 0, 0xFFFE);
	}

	mutex_lock(&data->update_lock);
	data->fan[sf][nr] = val;
	err = emc6w201_write16(client, EMC6W201_REG_FAN_MIN(nr),
	data->fan[sf][nr]);
	mutex_unlock(&data->update_lock);

	return err < 0 ? err : count;
	}

	static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, input);
	static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO \| S_IWUSR, show_in, set_in,
	0, min);
	static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO \| S_IWUSR, show_in, set_in,
	0, max);
	static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, input);
	static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO \| S_IWUSR, show_in, set_in,
	1, min);
	static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO \| S_IWUSR, show_in, set_in,
	1, max);
	static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, input);
	static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO \| S_IWUSR, show_in, set_in,
	2, min);
	static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO \| S_IWUSR, show_in, set_in,
	2, max);
	static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, input);
	static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO \| S_IWUSR, show_in, set_in,
	3, min);
	static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO \| S_IWUSR, show_in, set_in,
	3, max);
	static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, input);
	static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO \| S_IWUSR, show_in, set_in,
	4, min);
	static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO \| S_IWUSR, show_in, set_in,
	4, max);
	static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, input);
	static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO \| S_IWUSR, show_in, set_in,
	5, min);
	static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO \| S_IWUSR, show_in, set_in,
	5, max);

	static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, input);
	static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	0, min);
	static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	0, max);
	static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, input);
	static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	1, min);
	static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	1, max);
	static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, input);
	static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	2, min);
	static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	2, max);
	static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, input);
	static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	3, min);
	static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	3, max);
	static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, input);
	static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	4, min);
	static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	4, max);
	static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, input);
	static SENSOR_DEVICE_ATTR_2(temp6_min, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	5, min);
	static SENSOR_DEVICE_ATTR_2(temp6_max, S_IRUGO \| S_IWUSR, show_temp, set_temp,
	5, max);

	static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, input);
	static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO \| S_IWUSR, show_fan, set_fan,
	0, min);
	static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, input);
	static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO \| S_IWUSR, show_fan, set_fan,
	1, min);
	static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, input);
	static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO \| S_IWUSR, show_fan, set_fan,
	2, min);
	static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, input);
	static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO \| S_IWUSR, show_fan, set_fan,
	3, min);
	static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, input);
	static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO \| S_IWUSR, show_fan, set_fan,
	4, min);

	static struct attribute *emc6w201_attributes[] = {
	&sensor_dev_attr_in0_input.dev_attr.attr,
	&sensor_dev_attr_in0_min.dev_attr.attr,
	&sensor_dev_attr_in0_max.dev_attr.attr,
	&sensor_dev_attr_in1_input.dev_attr.attr,
	&sensor_dev_attr_in1_min.dev_attr.attr,
	&sensor_dev_attr_in1_max.dev_attr.attr,
	&sensor_dev_attr_in2_input.dev_attr.attr,
	&sensor_dev_attr_in2_min.dev_attr.attr,
	&sensor_dev_attr_in2_max.dev_attr.attr,
	&sensor_dev_attr_in3_input.dev_attr.attr,
	&sensor_dev_attr_in3_min.dev_attr.attr,
	&sensor_dev_attr_in3_max.dev_attr.attr,
	&sensor_dev_attr_in4_input.dev_attr.attr,
	&sensor_dev_attr_in4_min.dev_attr.attr,
	&sensor_dev_attr_in4_max.dev_attr.attr,
	&sensor_dev_attr_in5_input.dev_attr.attr,
	&sensor_dev_attr_in5_min.dev_attr.attr,
	&sensor_dev_attr_in5_max.dev_attr.attr,

	&sensor_dev_attr_temp1_input.dev_attr.attr,
	&sensor_dev_attr_temp1_min.dev_attr.attr,
	&sensor_dev_attr_temp1_max.dev_attr.attr,
	&sensor_dev_attr_temp2_input.dev_attr.attr,
	&sensor_dev_attr_temp2_min.dev_attr.attr,
	&sensor_dev_attr_temp2_max.dev_attr.attr,
	&sensor_dev_attr_temp3_input.dev_attr.attr,
	&sensor_dev_attr_temp3_min.dev_attr.attr,
	&sensor_dev_attr_temp3_max.dev_attr.attr,
	&sensor_dev_attr_temp4_input.dev_attr.attr,
	&sensor_dev_attr_temp4_min.dev_attr.attr,
	&sensor_dev_attr_temp4_max.dev_attr.attr,
	&sensor_dev_attr_temp5_input.dev_attr.attr,
	&sensor_dev_attr_temp5_min.dev_attr.attr,
	&sensor_dev_attr_temp5_max.dev_attr.attr,
	&sensor_dev_attr_temp6_input.dev_attr.attr,
	&sensor_dev_attr_temp6_min.dev_attr.attr,
	&sensor_dev_attr_temp6_max.dev_attr.attr,

	&sensor_dev_attr_fan1_input.dev_attr.attr,
	&sensor_dev_attr_fan1_min.dev_attr.attr,
	&sensor_dev_attr_fan2_input.dev_attr.attr,
	&sensor_dev_attr_fan2_min.dev_attr.attr,
	&sensor_dev_attr_fan3_input.dev_attr.attr,
	&sensor_dev_attr_fan3_min.dev_attr.attr,
	&sensor_dev_attr_fan4_input.dev_attr.attr,
	&sensor_dev_attr_fan4_min.dev_attr.attr,
	&sensor_dev_attr_fan5_input.dev_attr.attr,
	&sensor_dev_attr_fan5_min.dev_attr.attr,
	NULL
	};

	static const struct attribute_group emc6w201_group = {
	.attrs = emc6w201_attributes,
	};

	/*
	* Driver interface
	*/

	/* Return 0 if detection is successful, -ENODEV otherwise */
	static int emc6w201_detect(struct i2c_client *client,
	struct i2c_board_info *info)
	{
	struct i2c_adapter *adapter = client->adapter;
	int company, verstep, config;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
	return -ENODEV;

	/* Identification */
	company = i2c_smbus_read_byte_data(client, EMC6W201_REG_COMPANY);
	if (company != 0x5C)
	return -ENODEV;
	verstep = i2c_smbus_read_byte_data(client, EMC6W201_REG_VERSTEP);
	if (verstep < 0 \|\| (verstep & 0xF0) != 0xB0)
	return -ENODEV;
	if ((verstep & 0x0F) > 2) {
	dev_dbg(&client->dev, "Unknwown EMC6W201 stepping %d\n",
	verstep & 0x0F);
	return -ENODEV;
	}

	/* Check configuration */
	config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG);
	if (config < 0 \|\| (config & 0xF4) != 0x04)
	return -ENODEV;
	if (!(config & 0x01)) {
	dev_err(&client->dev, "Monitoring not enabled\n");
	return -ENODEV;
	}

	strlcpy(info->type, "emc6w201", I2C_NAME_SIZE);

	return 0;
	}

	static int emc6w201_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	struct emc6w201_data *data;
	int err;

	data = kzalloc(sizeof(struct emc6w201_data), GFP_KERNEL);
	if (!data) {
	err = -ENOMEM;
	goto exit;
	}

	i2c_set_clientdata(client, data);
	mutex_init(&data->update_lock);

	/* Create sysfs attribute */
	err = sysfs_create_group(&client->dev.kobj, &emc6w201_group);
	if (err)
	goto exit_free;

	/* Expose as a hwmon device */
	data->hwmon_dev = hwmon_device_register(&client->dev);
	if (IS_ERR(data->hwmon_dev)) {
	err = PTR_ERR(data->hwmon_dev);
	goto exit_remove;
	}

	return 0;

	exit_remove:
	sysfs_remove_group(&client->dev.kobj, &emc6w201_group);
	exit_free:
	kfree(data);
	exit:
	return err;
	}

	static int emc6w201_remove(struct i2c_client *client)
	{
	struct emc6w201_data *data = i2c_get_clientdata(client);

	hwmon_device_unregister(data->hwmon_dev);
	sysfs_remove_group(&client->dev.kobj, &emc6w201_group);
	kfree(data);

	return 0;
	}

	static const struct i2c_device_id emc6w201_id[] = {
	{ "emc6w201", 0 },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, emc6w201_id);

	static struct i2c_driver emc6w201_driver = {
	.class = I2C_CLASS_HWMON,
	.driver = {
	.name = "emc6w201",
	},
	.probe = emc6w201_probe,
	.remove = emc6w201_remove,
	.id_table = emc6w201_id,
	.detect = emc6w201_detect,
	.address_list = normal_i2c,
	};

	static int __init sensors_emc6w201_init(void)
	{
	return i2c_add_driver(&emc6w201_driver);
	}
	module_init(sensors_emc6w201_init);

	static void __exit sensors_emc6w201_exit(void)
	{
	i2c_del_driver(&emc6w201_driver);
	}
	module_exit(sensors_emc6w201_exit);

	MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
	MODULE_DESCRIPTION("SMSC EMC6W201 hardware monitoring driver");
	MODULE_LICENSE("GPL");