arch/arm64/boot/dts/qcom/sdm670-cdp.dtsi

/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "sdm670-pmic-overlay.dtsi"

&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v3";

	vdda-phy-supply = <&pm660l_l1>; /* 0.88v */
	vdda-pll-supply = <&pm660_l1>; /* 1.2v */
	vdda-phy-max-microamp = <62900>;
	vdda-pll-max-microamp = <18300>;

	status = "ok";
};

&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm660l_l4>;
	vccq2-supply = <&pm660_l8>;
	vcc-max-microamp = <600000>;
	vccq2-max-microamp = <600000>;

	qcom,vddp-ref-clk-supply = <&pm660_l1>;
	qcom,vddp-ref-clk-max-microamp = <100>;

	status = "ok";
};

&qupv3_se9_2uart {
	status = "disabled";
};

&qupv3_se12_2uart {
	status = "ok";
};

&qupv3_se8_spi {
	status = "disabled";
};

&qupv3_se3_i2c {
	status = "disabled";
};

&qupv3_se10_i2c {
	status = "disabled";
};

&qupv3_se6_4uart {
	status = "disabled";
};

&sdhc_1 {
	vdd-supply = <&pm660l_l4>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <200 570000>;

	vdd-io-supply = <&pm660_l8>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <200 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on  &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	status = "ok";
};

&sdhc_2 {
	vdd-supply = <&pm660l_l5>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <200 800000>;

	vdd-io-supply = <&pm660l_l2>;
	qcom,vdd-io-voltage-level = <1800000 2960000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;

	status = "ok";
};

&pm660_charger {
	qcom,batteryless-platform;
};