drivers/gpu/drm/exynos/exynos_drm_drv.h - kernel/msm-4.9 - Gitiles

 /* exynos_drm_drv.h
  *
  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  * Authors:
  *	Inki Dae <inki.dae@samsung.com>
  *	Joonyoung Shim <jy0922.shim@samsung.com>
  *	Seung-Woo Kim <sw0312.kim@samsung.com>
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
  * copy of this software and associated documentation files (the "Software"),
  * to deal in the Software without restriction, including without limitation
  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  * and/or sell copies of the Software, and to permit persons to whom the
  * Software is furnished to do so, subject to the following conditions:
  *
  * The above copyright notice and this permission notice (including the next
  * paragraph) shall be included in all copies or substantial portions of the
  * Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  * OTHER DEALINGS IN THE SOFTWARE.
  */

 #ifndef _EXYNOS_DRM_DRV_H_
 #define _EXYNOS_DRM_DRV_H_

 #include "drm.h"

 #define MAX_CRTC	2

 struct drm_device;
 struct exynos_drm_overlay;
 struct drm_connector;

 /* this enumerates display type. */
 enum exynos_drm_output_type {
 	EXYNOS_DISPLAY_TYPE_NONE,
 	/* RGB or CPU Interface. */
 	EXYNOS_DISPLAY_TYPE_LCD,
 	/* HDMI Interface. */
 	EXYNOS_DISPLAY_TYPE_HDMI,
 };

 /*
  * Exynos drm overlay ops structure.
  *
  * @mode_set: copy drm overlay info to hw specific overlay info.
  * @commit: apply hardware specific overlay data to registers.
  * @disable: disable hardware specific overlay.
  */
 struct exynos_drm_overlay_ops {
 	void (*mode_set)(struct device *subdrv_dev,
 			 struct exynos_drm_overlay *overlay);
 	void (*commit)(struct device *subdrv_dev);
 	void (*disable)(struct device *subdrv_dev);
 };

 /*
  * Exynos drm common overlay structure.
  *
  * @fb_x: offset x on a framebuffer to be displayed.
  *	- the unit is screen coordinates.
  * @fb_y: offset y on a framebuffer to be displayed.
  *	- the unit is screen coordinates.
  * @fb_width: width of a framebuffer.
  * @fb_height: height of a framebuffer.
  * @crtc_x: offset x on hardware screen.
  * @crtc_y: offset y on hardware screen.
  * @crtc_width: window width to be displayed (hardware screen).
  * @crtc_height: window height to be displayed (hardware screen).
  * @mode_width: width of screen mode.
  * @mode_height: height of screen mode.
  * @refresh: refresh rate.
  * @scan_flag: interlace or progressive way.
  *	(it could be DRM_MODE_FLAG_*)
  * @bpp: pixel size.(in bit)
  * @paddr: bus(accessed by dma) physical memory address to this overlay
  *		and this is physically continuous.
  * @vaddr: virtual memory addresss to this overlay.
  * @default_win: a window to be enabled.
  * @color_key: color key on or off.
  * @index_color: if using color key feature then this value would be used
  *			as index color.
  * @local_path: in case of lcd type, local path mode on or off.
  * @transparency: transparency on or off.
  * @activated: activated or not.
  *
  * this structure is common to exynos SoC and its contents would be copied
  * to hardware specific overlay info.
  */
 struct exynos_drm_overlay {
 	unsigned int fb_x;
 	unsigned int fb_y;
 	unsigned int fb_width;
 	unsigned int fb_height;
 	unsigned int crtc_x;
 	unsigned int crtc_y;
 	unsigned int crtc_width;
 	unsigned int crtc_height;
 	unsigned int mode_width;
 	unsigned int mode_height;
 	unsigned int refresh;
 	unsigned int scan_flag;
 	unsigned int bpp;
 	unsigned int pitch;
 	dma_addr_t paddr;
 	void __iomem *vaddr;

 	bool default_win;
 	bool color_key;
 	unsigned int index_color;
 	bool local_path;
 	bool transparency;
 	bool activated;
 };

 /*
  * Exynos DRM Display Structure.
  *	- this structure is common to analog tv, digital tv and lcd panel.
  *
  * @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
  * @is_connected: check for that display is connected or not.
  * @get_edid: get edid modes from display driver.
  * @get_timing: get timing object from display driver.
  * @check_timing: check if timing is valid or not.
  * @power_on: display device on or off.
  */
 struct exynos_drm_display {
 	enum exynos_drm_output_type type;
 	bool (*is_connected)(struct device *dev);
 	int (*get_edid)(struct device *dev, struct drm_connector *connector,
 				u8 *edid, int len);
 	void *(*get_timing)(struct device *dev);
 	int (*check_timing)(struct device *dev, void *timing);
 	int (*power_on)(struct device *dev, int mode);
 };

 /*
  * Exynos drm manager ops
  *
  * @mode_set: convert drm_display_mode to hw specific display mode and
  *	      would be called by encoder->mode_set().
  * @commit: set current hw specific display mode to hw.
  * @enable_vblank: specific driver callback for enabling vblank interrupt.
  * @disable_vblank: specific driver callback for disabling vblank interrupt.
  */
 struct exynos_drm_manager_ops {
 	void (*mode_set)(struct device *subdrv_dev, void *mode);
 	void (*commit)(struct device *subdrv_dev);
 	int (*enable_vblank)(struct device *subdrv_dev);
 	void (*disable_vblank)(struct device *subdrv_dev);
 };

 /*
  * Exynos drm common manager structure.
  *
  * @dev: pointer to device object for subdrv device driver.
  *	sub drivers such as display controller or hdmi driver,
  *	have their own device object.
  * @ops: pointer to callbacks for exynos drm specific framebuffer.
  *	these callbacks should be set by specific drivers such fimd
  *	or hdmi driver and are used to control hardware global registers.
  * @overlay_ops: pointer to callbacks for exynos drm specific framebuffer.
  *	these callbacks should be set by specific drivers such fimd
  *	or hdmi driver and are used to control hardware overlay reigsters.
  * @display: pointer to callbacks for exynos drm specific framebuffer.
  *	these callbacks should be set by specific drivers such fimd
  *	or hdmi driver and are used to control display devices such as
  *	analog tv, digital tv and lcd panel and also get timing data for them.
  */
 struct exynos_drm_manager {
 	struct device *dev;
 	int pipe;
 	struct exynos_drm_manager_ops *ops;
 	struct exynos_drm_overlay_ops *overlay_ops;
 	struct exynos_drm_display *display;
 };

 /*
  * Exynos drm private structure.
  */
 struct exynos_drm_private {
 	struct drm_fb_helper *fb_helper;

 	/* list head for new event to be added. */
 	struct list_head pageflip_event_list;

 	/*
 	 * created crtc object would be contained at this array and
 	 * this array is used to be aware of which crtc did it request vblank.
 	 */
 	struct drm_crtc *crtc[MAX_CRTC];
 };

 /*
  * Exynos drm sub driver structure.
  *
  * @list: sub driver has its own list object to register to exynos drm driver.
  * @drm_dev: pointer to drm_device and this pointer would be set
  *	when sub driver calls exynos_drm_subdrv_register().
  * @probe: this callback would be called by exynos drm driver after
  *	subdrv is registered to it.
  * @remove: this callback is used to release resources created
  *	by probe callback.
  * @manager: subdrv has its own manager to control a hardware appropriately
  *	and we can access a hardware drawing on this manager.
  * @encoder: encoder object owned by this sub driver.
  * @connector: connector object owned by this sub driver.
  */
 struct exynos_drm_subdrv {
 	struct list_head list;
 	struct drm_device *drm_dev;

 	int (*probe)(struct drm_device *drm_dev, struct device *dev);
 	void (*remove)(struct drm_device *dev);

 	struct exynos_drm_manager manager;
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
 };

 /*
  * this function calls a probe callback registered to sub driver list and
  * create its own encoder and connector and then set drm_device object
  * to global one.
  */
 int exynos_drm_device_register(struct drm_device *dev);
 /*
  * this function calls a remove callback registered to sub driver list and
  * destroy its own encoder and connetor.
  */
 int exynos_drm_device_unregister(struct drm_device *dev);

 /*
  * this function would be called by sub drivers such as display controller
  * or hdmi driver to register this sub driver object to exynos drm driver
  * and when a sub driver is registered to exynos drm driver a probe callback
  * of the sub driver is called and creates its own encoder and connector
  * and then fb helper and drm mode group would be re-initialized.
  */
 int exynos_drm_subdrv_register(struct exynos_drm_subdrv *drm_subdrv);

 /*
  * this function removes subdrv list from exynos drm driver and fb helper
  * and drm mode group would be re-initialized.
  */
 int exynos_drm_subdrv_unregister(struct exynos_drm_subdrv *drm_subdrv);

 #endif
	/* exynos_drm_drv.h
	*
	* Copyright (c) 2011 Samsung Electronics Co., Ltd.
	* Authors:
	* Inki Dae <inki.dae@samsung.com>
	* Joonyoung Shim <jy0922.shim@samsung.com>
	* Seung-Woo Kim <sw0312.kim@samsung.com>
	*
	* Permission is hereby granted, free of charge, to any person obtaining a
	* copy of this software and associated documentation files (the "Software"),
	* to deal in the Software without restriction, including without limitation
	* the rights to use, copy, modify, merge, publish, distribute, sublicense,
	* and/or sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following conditions:
	*
	* The above copyright notice and this permission notice (including the next
	* paragraph) shall be included in all copies or substantial portions of the
	* Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	* VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
	* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
	* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#ifndef _EXYNOS_DRM_DRV_H_
	#define _EXYNOS_DRM_DRV_H_

	#include "drm.h"

	#define MAX_CRTC 2

	struct drm_device;
	struct exynos_drm_overlay;
	struct drm_connector;

	/* this enumerates display type. */
	enum exynos_drm_output_type {
	EXYNOS_DISPLAY_TYPE_NONE,
	/* RGB or CPU Interface. */
	EXYNOS_DISPLAY_TYPE_LCD,
	/* HDMI Interface. */
	EXYNOS_DISPLAY_TYPE_HDMI,
	};

	/*
	* Exynos drm overlay ops structure.
	*
	* @mode_set: copy drm overlay info to hw specific overlay info.
	* @commit: apply hardware specific overlay data to registers.
	* @disable: disable hardware specific overlay.
	*/
	struct exynos_drm_overlay_ops {
	void (mode_set)(struct device subdrv_dev,
	struct exynos_drm_overlay *overlay);
	void (commit)(struct device subdrv_dev);
	void (disable)(struct device subdrv_dev);
	};

	/*
	* Exynos drm common overlay structure.
	*
	* @fb_x: offset x on a framebuffer to be displayed.
	* - the unit is screen coordinates.
	* @fb_y: offset y on a framebuffer to be displayed.
	* - the unit is screen coordinates.
	* @fb_width: width of a framebuffer.
	* @fb_height: height of a framebuffer.
	* @crtc_x: offset x on hardware screen.
	* @crtc_y: offset y on hardware screen.
	* @crtc_width: window width to be displayed (hardware screen).
	* @crtc_height: window height to be displayed (hardware screen).
	* @mode_width: width of screen mode.
	* @mode_height: height of screen mode.
	* @refresh: refresh rate.
	* @scan_flag: interlace or progressive way.
	* (it could be DRM_MODE_FLAG_*)
	* @bpp: pixel size.(in bit)
	* @paddr: bus(accessed by dma) physical memory address to this overlay
	* and this is physically continuous.
	* @vaddr: virtual memory addresss to this overlay.
	* @default_win: a window to be enabled.
	* @color_key: color key on or off.
	* @index_color: if using color key feature then this value would be used
	* as index color.
	* @local_path: in case of lcd type, local path mode on or off.
	* @transparency: transparency on or off.
	* @activated: activated or not.
	*
	* this structure is common to exynos SoC and its contents would be copied
	* to hardware specific overlay info.
	*/
	struct exynos_drm_overlay {
	unsigned int fb_x;
	unsigned int fb_y;
	unsigned int fb_width;
	unsigned int fb_height;
	unsigned int crtc_x;
	unsigned int crtc_y;
	unsigned int crtc_width;
	unsigned int crtc_height;
	unsigned int mode_width;
	unsigned int mode_height;
	unsigned int refresh;
	unsigned int scan_flag;
	unsigned int bpp;
	unsigned int pitch;
	dma_addr_t paddr;
	void __iomem *vaddr;

	bool default_win;
	bool color_key;
	unsigned int index_color;
	bool local_path;
	bool transparency;
	bool activated;
	};

	/*
	* Exynos DRM Display Structure.
	* - this structure is common to analog tv, digital tv and lcd panel.
	*
	* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
	* @is_connected: check for that display is connected or not.
	* @get_edid: get edid modes from display driver.
	* @get_timing: get timing object from display driver.
	* @check_timing: check if timing is valid or not.
	* @power_on: display device on or off.
	*/
	struct exynos_drm_display {
	enum exynos_drm_output_type type;
	bool (is_connected)(struct device dev);
	int (get_edid)(struct device dev, struct drm_connector *connector,
	u8 *edid, int len);
	void (get_timing)(struct device *dev);
	int (check_timing)(struct device dev, void *timing);
	int (power_on)(struct device dev, int mode);
	};

	/*
	* Exynos drm manager ops
	*
	* @mode_set: convert drm_display_mode to hw specific display mode and
	* would be called by encoder->mode_set().
	* @commit: set current hw specific display mode to hw.
	* @enable_vblank: specific driver callback for enabling vblank interrupt.
	* @disable_vblank: specific driver callback for disabling vblank interrupt.
	*/
	struct exynos_drm_manager_ops {
	void (mode_set)(struct device subdrv_dev, void *mode);
	void (commit)(struct device subdrv_dev);
	int (enable_vblank)(struct device subdrv_dev);
	void (disable_vblank)(struct device subdrv_dev);
	};

	/*
	* Exynos drm common manager structure.
	*
	* @dev: pointer to device object for subdrv device driver.
	* sub drivers such as display controller or hdmi driver,
	* have their own device object.
	* @ops: pointer to callbacks for exynos drm specific framebuffer.
	* these callbacks should be set by specific drivers such fimd
	* or hdmi driver and are used to control hardware global registers.
	* @overlay_ops: pointer to callbacks for exynos drm specific framebuffer.
	* these callbacks should be set by specific drivers such fimd
	* or hdmi driver and are used to control hardware overlay reigsters.
	* @display: pointer to callbacks for exynos drm specific framebuffer.
	* these callbacks should be set by specific drivers such fimd
	* or hdmi driver and are used to control display devices such as
	* analog tv, digital tv and lcd panel and also get timing data for them.
	*/
	struct exynos_drm_manager {
	struct device *dev;
	int pipe;
	struct exynos_drm_manager_ops *ops;
	struct exynos_drm_overlay_ops *overlay_ops;
	struct exynos_drm_display *display;
	};

	/*
	* Exynos drm private structure.
	*/
	struct exynos_drm_private {
	struct drm_fb_helper *fb_helper;

	/* list head for new event to be added. */
	struct list_head pageflip_event_list;

	/*
	* created crtc object would be contained at this array and
	* this array is used to be aware of which crtc did it request vblank.
	*/
	struct drm_crtc *crtc[MAX_CRTC];
	};

	/*
	* Exynos drm sub driver structure.
	*
	* @list: sub driver has its own list object to register to exynos drm driver.
	* @drm_dev: pointer to drm_device and this pointer would be set
	* when sub driver calls exynos_drm_subdrv_register().
	* @probe: this callback would be called by exynos drm driver after
	* subdrv is registered to it.
	* @remove: this callback is used to release resources created
	* by probe callback.
	* @manager: subdrv has its own manager to control a hardware appropriately
	* and we can access a hardware drawing on this manager.
	* @encoder: encoder object owned by this sub driver.
	* @connector: connector object owned by this sub driver.
	*/
	struct exynos_drm_subdrv {
	struct list_head list;
	struct drm_device *drm_dev;

	int (probe)(struct drm_device drm_dev, struct device *dev);
	void (remove)(struct drm_device dev);

	struct exynos_drm_manager manager;
	struct drm_encoder *encoder;
	struct drm_connector *connector;
	};

	/*
	* this function calls a probe callback registered to sub driver list and
	* create its own encoder and connector and then set drm_device object
	* to global one.
	*/
	int exynos_drm_device_register(struct drm_device *dev);
	/*
	* this function calls a remove callback registered to sub driver list and
	* destroy its own encoder and connetor.
	*/
	int exynos_drm_device_unregister(struct drm_device *dev);

	/*
	* this function would be called by sub drivers such as display controller
	* or hdmi driver to register this sub driver object to exynos drm driver
	* and when a sub driver is registered to exynos drm driver a probe callback
	* of the sub driver is called and creates its own encoder and connector
	* and then fb helper and drm mode group would be re-initialized.
	*/
	int exynos_drm_subdrv_register(struct exynos_drm_subdrv *drm_subdrv);

	/*
	* this function removes subdrv list from exynos drm driver and fb helper
	* and drm mode group would be re-initialized.
	*/
	int exynos_drm_subdrv_unregister(struct exynos_drm_subdrv *drm_subdrv);

	#endif