drm/rockchip: Clear all interrupts before requesting the IRQ
commit 5f9e93fed4d45e9a8f84728aff1a8f2ab8922902 upstream.
Calling request_irq() followed by disable_irq() is usually a bad idea,
specially if the interrupt can be pending, and you're not yet in a
position to handle it.
This is exactly what happens on my kevin system when rebooting in a
second kernel using kexec: Some interrupt is left pending from
the previous kernel, and we take it too early, before disable_irq()
could do anything.
Let's clear the pending interrupts as we initialize the HW, and move
the interrupt request after that point. This ensures that we're in
a sane state when the interrupt is requested.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[adapted to recent rockchip-drm changes]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-2-marc.zyngier@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 6e3c4ac..32d87c6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1386,6 +1386,9 @@
usleep_range(10, 20);
reset_control_deassert(ahb_rst);
+ VOP_INTR_SET_TYPE(vop, clear, INTR_MASK, 1);
+ VOP_INTR_SET_TYPE(vop, enable, INTR_MASK, 0);
+
memcpy(vop->regsbak, vop->regs, vop->len);
for (i = 0; i < vop_data->table_size; i++)
@@ -1541,17 +1544,9 @@
mutex_init(&vop->vsync_mutex);
- ret = devm_request_irq(dev, vop->irq, vop_isr,
- IRQF_SHARED, dev_name(dev), vop);
- if (ret)
- return ret;
-
- /* IRQ is initially disabled; it gets enabled in power_on */
- disable_irq(vop->irq);
-
ret = vop_create_crtc(vop);
if (ret)
- goto err_enable_irq;
+ return ret;
pm_runtime_enable(&pdev->dev);
@@ -1561,13 +1556,19 @@
goto err_disable_pm_runtime;
}
+ ret = devm_request_irq(dev, vop->irq, vop_isr,
+ IRQF_SHARED, dev_name(dev), vop);
+ if (ret)
+ goto err_disable_pm_runtime;
+
+ /* IRQ is initially disabled; it gets enabled in power_on */
+ disable_irq(vop->irq);
+
return 0;
err_disable_pm_runtime:
pm_runtime_disable(&pdev->dev);
vop_destroy_crtc(vop);
-err_enable_irq:
- enable_irq(vop->irq); /* To balance out the disable_irq above */
return ret;
}