Merge tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Allwinner DT patches, round 2
Mostly some audio codec patches to enable it on more boards, and a bunch
devices activation (Ethernet, touchscreen, backlights). One more board has
been added too.
* tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet
ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT
ARM: dt: sun7i: Enable audio codec on MK808C
ARM: sunxi: dt: enable audio codec on mk802
ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration
ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet
ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 31d1d65..c0d8788 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -587,7 +587,7 @@
modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>
preaction=<preaction type> preop=<preop type> start_now=x
- nowayout=x ifnum_to_use=n
+ nowayout=x ifnum_to_use=n panic_wdt_timeout=<t>
ifnum_to_use specifies which interface the watchdog timer should use.
The default is -1, which means to pick the first one registered.
@@ -597,7 +597,9 @@
occur (if pretimeout is zero, then pretimeout will not be enabled). Note
that the pretimeout is the time before the final timeout. So if the
timeout is 50 seconds and the pretimeout is 10 seconds, then the pretimeout
-will occur in 40 second (10 seconds before the timeout).
+will occur in 40 second (10 seconds before the timeout). The panic_wdt_timeout
+is the value of timeout which is set on kernel panic, in order to let actions
+such as kdump to occur during panic.
The action may be "reset", "power_cycle", or "power_off", and
specifies what to do when the timer times out, and defaults to
@@ -634,6 +636,7 @@
ipmi_watchdog.preop=<preop type>
ipmi_watchdog.start_now=x
ipmi_watchdog.nowayout=x
+ ipmi_watchdog.panic_wdt_timeout=<t>
The options are the same as the module parameter options.
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
index f17bc4c..400c0c2 100644
--- a/Documentation/arm/keystone/Overview.txt
+++ b/Documentation/arm/keystone/Overview.txt
@@ -49,24 +49,6 @@
The device tree documentation for the keystone machines are located at
Documentation/devicetree/bindings/arm/keystone/keystone.txt
-Known issues & workaround
--------------------------
-
-Some of the device drivers used on keystone are re-used from that from
-DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
-Some of the keystone specific drivers such as netcp uses run time power
-management API instead to enable clock. As this API has limitations on
-keystone, following workaround is needed to boot Linux.
-
- Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
- clock frameworks will try to disable clocks that are unused and disable
- the hardware. This is because netcp related power domain and clock
- domains are enabled in u-boot as run time power management API currently
- doesn't enable clocks for netcp due to a limitation. This workaround is
- expected to be removed in the future when proper API support becomes
- available. Until then, this work around is needed.
-
-
Document Author
---------------
Murali Karicheri <m-karicheri2@ti.com>
diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt
index 2f6c6ff..d8880ca 100644
--- a/Documentation/block/null_blk.txt
+++ b/Documentation/block/null_blk.txt
@@ -70,3 +70,6 @@
parameter.
1: The multi-queue block layer is instantiated with a hardware dispatch
queue for each CPU node in the system.
+
+use_lightnvm=[0/1]: Default: 0
+ Register device with LightNVM. Requires blk-mq to be used.
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
index 6b0f49f..8608a77 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.txt
@@ -5,4 +5,11 @@
Required root node property:
+bcm4708
compatible = "brcm,bcm4708";
+
+bcm4709
+compatible = "brcm,bcm4709";
+
+bcm53012
+compatible = "brcm,bcm53012";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 0000000..677ef9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
@@ -0,0 +1,39 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPU in the following Broadcom SoCs:
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the corresponding secondary "cpu" device tree node:
+ - enable-method = "brcm,bcm-nsp-smp";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register which should hold the common
+entry point for a secondary CPU. This entry is cpu node specific
+and should be added per cpu. E.g., in case of NSP (BCM58625) which
+is a dual core CPU SoC, this entry should be added to cpu1 node.
+
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff042c>;
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/compulab-boards.txt b/Documentation/devicetree/bindings/arm/compulab-boards.txt
new file mode 100644
index 0000000..71172d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/compulab-boards.txt
@@ -0,0 +1,5 @@
+CompuLab SB-SOM is a multi-module baseboard capable of carrying CM-T43, CM-T54,
+and CM-QS600 modules with minor modifications to the SB-SOM assembly.
+
+Required root node properties:
+ - compatible = should be "compulab,sb-som"
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 3a07a87..d191554 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -190,6 +190,7 @@
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,psci"
+ "brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 5171ad8..ab0c9cd 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -24,6 +24,8 @@
"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
+"cloudengines,pogo02"
+"cloudengines,pogoplugv4"
"dlink,dns-320"
"dlink,dns-320-a1"
"dlink,dns-325"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 618a9199..54f43bc 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -6,6 +6,7 @@
Required root node property:
compatible: Must contain one of
+ "mediatek,mt2701"
"mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
@@ -17,6 +18,9 @@
Supported boards:
+- Evaluation board for MT2701:
+ Required root node properties:
+ - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
- Evaluation board for MT6580:
Required root node properties:
- compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index f6cd3e4..aaf8d14 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -18,7 +18,7 @@
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
index f25b854..2f6ff86 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt
@@ -18,7 +18,7 @@
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 9f4e513..a2bd593 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -138,9 +138,21 @@
- AM335X phyBOARD-WEGA: Single Board Computer dev kit
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4
+ compatible = "compulab,cm-t335", "ti,am33xx"
+
+- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
+- AM437x CM-T43
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
+- AM437x SBC-T43
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
@@ -150,6 +162,12 @@
- AM437x SK EVM: AM437x StarterKit Evaluation Module
compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+- AM57XX CL-SOM-AM57x
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM57XX SBC-AM57x
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 8e985dd..c980b2b 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,6 +1,10 @@
Rockchip platforms device tree bindings
---------------------------------------
+- Kylin RK3036 board:
+ Required root node properties:
+ - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
+
- MarsBoard RK3066 board:
Required root node properties:
- compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
@@ -35,6 +39,11 @@
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Brain (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
@@ -49,6 +58,15 @@
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+- Google Mickey (Asus Chromebit CS10):
+ Required root node properties:
+ - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
- Google Minnie (Asus Chromebook Flip C100P):
Required root node properties:
- compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
@@ -72,3 +90,7 @@
- Rockchip R88 board:
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+
+- Rockchip RK3228 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/Documentation/devicetree/bindings/arm/scu.txt b/Documentation/devicetree/bindings/arm/scu.txt
index c447680..08a5878 100644
--- a/Documentation/devicetree/bindings/arm/scu.txt
+++ b/Documentation/devicetree/bindings/arm/scu.txt
@@ -10,10 +10,13 @@
Revision r2p0
- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
Revision r0p1
+- ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
+ Manial Revision r2p0
- compatible : Should be:
"arm,cortex-a9-scu"
"arm,cortex-a5-scu"
+ "arm,arm11mp-scu"
- reg : Specify the base address and the size of the SCU register window.
diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt
new file mode 100644
index 0000000..8422988
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/technologic.txt
@@ -0,0 +1,6 @@
+Technologic Systems Platforms Device Tree Bindings
+--------------------------------------------------
+
+TS-4800 board
+Required root node properties:
+ - compatible = "technologic,imx51-ts4800", "fsl,imx51";
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
new file mode 100644
index 0000000..8b7177c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -0,0 +1,40 @@
+ARM System Controller ICST clocks
+
+The ICS525 and ICS307 oscillators are produced by Integrated Devices
+Technology (IDT). ARM integrated these oscillators deeply into their
+reference designs by adding special control registers that manage such
+oscillators to their system controllers.
+
+The ARM system controller contains logic to serialize and initialize
+an ICST clock request after a write to the 32 bit register at an offset
+into the system controller. Furthermore, to even be able to alter one of
+these frequencies, the system controller must first be unlocked by
+writing a special token to another offset in the system controller.
+
+The ICST oscillator must be provided inside a system controller node.
+
+Required properties:
+- lock-offset: the offset address into the system controller where the
+ unlocking register is located
+- vco-offset: the offset address into the system controller where the
+ ICST control register is located (even 32 bit address)
+- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
+- #clock-cells: must be <0>
+- clocks: parent clock, since the ICST needs a parent clock to derive its
+ frequency from, this attribute is compulsory.
+
+Example:
+
+syscon: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x1000>;
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0c>;
+ clocks = <&xtal24mhz>;
+ };
+ (...)
+};
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index ede65a5..0b35e71 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -208,3 +208,8 @@
ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+
+BCM63138
+--------
+PLL and leaf clock compatible strings for BCM63138 are:
+ "brcm,bcm63138-armpll"
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
new file mode 100644
index 0000000..e3eb0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals. These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID Clock
+-------------
+0 AXI bus clock
+1 GPU clock
+2 VMeta clock
+3 LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+ Control 0 register. This will cover that register, as well as the
+ Core PLL and Clock Divider Control 1 register. Thus, it will have
+ a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@0064 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
new file mode 100644
index 0000000..70cd8d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,startek-kd050c.txt
@@ -0,0 +1,4 @@
+Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "startek,startek-kd050c"
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index d3d0a4f..079b42a 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -22,8 +22,7 @@
Optional properties:
- ti,hwmods: Name of the hwmods associated to the eDMA CC
- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
- these channels will be SW triggered channels. The list must
- contain 16 bits numbers, see example.
+ these channels will be SW triggered channels. See example.
- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
the driver, they are allocated to be used by for example the
DSP. See example.
@@ -56,10 +55,9 @@
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
/* Channel 20 and 21 is allocated for memcpy */
- ti,edma-memcpy-channels = /bits/ 16 <20 21>;
- /* The following PaRAM slots are reserved: 35-45 and 100-110 */
- ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
- /bits/ 16 <100 10>;
+ ti,edma-memcpy-channels = <20 21>;
+ /* The following PaRAM slots are reserved: 35-44 and 100-109 */
+ ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
};
edma_tptc0: tptc@49800000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index afef6a8..b8e1674 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -14,6 +14,7 @@
"mediatek,mt6582-sysirq"
"mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
+ "mediatek,mt2701-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
Documentation/devicetree/bindings/arm/gic.txt
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index 4f05d20..d181096 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -26,7 +26,11 @@
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: dcdc1 {
+ reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -34,6 +38,7 @@
};
dcdc2_reg: dcdc2 {
+ reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -41,6 +46,7 @@
};
dcdc3_reg: dcc3 {
+ reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@@ -48,6 +54,7 @@
};
ldo1_reg: ldo1 {
+ reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -55,6 +62,7 @@
};
ldo2_reg: ldo2 {
+ reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -62,6 +70,7 @@
};
ldo3_reg: ldo3 {
+ reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -69,6 +78,7 @@
};
ldo4_reg: ldo4 {
+ reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 2d47add..a833a01 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -2,15 +2,15 @@
Required properties:
- compatible should contain:
- * "mediatek,mt8135-uart" for MT8135 compatible UARTS
- * "mediatek,mt8127-uart" for MT8127 compatible UARTS
- * "mediatek,mt8173-uart" for MT8173 compatible UARTS
- * "mediatek,mt6795-uart" for MT6795 compatible UARTS
- * "mediatek,mt6589-uart" for MT6589 compatible UARTS
- * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt2701-uart" for MT2701 compatible UARTS
* "mediatek,mt6580-uart" for MT6580 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795,
- MT6589, MT6582, MT6580, MT6577)
+ * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
+ * "mediatek,mt8127-uart" for MT8127 compatible UARTS
+ * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+ * "mediatek,mt8173-uart" for MT8173 compatible UARTS
+ * "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt
new file mode 100644
index 0000000..edd40b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt
@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+ May also include "simple-bus" if there are child devices, in which
+ case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+ interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+ standard property of this name. Required when compatible includes
+ "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node. Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+ pmu: power-management@d0000 {
+ compatible = "marvell,dove-pmu";
+ reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+ interrupts = <33>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #reset-cells = <1>;
+
+ domains {
+ vpu_domain: vpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000008>;
+ marvell,pmu_iso_mask = <0x00000001>;
+ resets = <&pmu 16>;
+ };
+
+ gpu_domain: gpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000004>;
+ marvell,pmu_iso_mask = <0x00000002>;
+ resets = <&pmu 18>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index a6c8afc..e8f15e3 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -21,6 +21,18 @@
These are the clocks which hardware needs to be enabled
before enabling certain power domains.
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
Example:
scpsys: scpsys@10006000 {
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
new file mode 100644
index 0000000..5cc82b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory Point 2 Point binding
+
+The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
+a single 32-bit value between two processors. Each value has a single writer
+(the local side) and a single reader (the remote side). Values are uniquely
+identified in the system by the directed edge (local processor ID to remote
+processor ID) and a string identifier.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smp2p"
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying the smp2p notification interrupt
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the remote end of the smp2p edge:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,smem:
+ Usage: required
+ Value type: <u32 array>
+ Definition: two identifiers of the inbound and outbound smem items used
+ for this edge
+
+- qcom,local-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the local endpoint of this edge
+
+- qcom,remote-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the remote endpoint of this edge
+
+= SUBNODES
+Each SMP2P pair contain a set of inbound and outbound entries, these are
+described in subnodes of the smp2p device node. The node names are not
+important.
+
+- qcom,entry-name:
+ Usage: required
+ Value type: <string>
+ Definition: specifies the name of this entry, for inbound entries this
+ will be used to match against the remotely allocated entry
+ and for outbound entries this name is used for allocating
+ entries
+
+- interrupt-controller:
+ Usage: required for incoming entries
+ Value type: <empty>
+ Definition: marks the entry as inbound; the node should be specified
+ as a two cell interrupt-controller as defined in
+ "../interrupt-controller/interrupts.txt"
+ If not specified this node will denote the outgoing entry
+
+- #interrupt-cells:
+ Usage: required for incoming entries
+ Value type: <u32>
+ Definition: must be 2 - denoting the bit in the entry and IRQ flags
+
+- #qcom,state-cells:
+ Usage: required for outgoing entries
+ Value type: <u32>
+ Definition: must be 1 - denoting the bit in the entry
+
+= EXAMPLE
+The following example shows the SMP2P setup with the wireless processor,
+defined from the 8974 apps processor's point-of-view. It encompasses one
+inbound and one outbound entry:
+
+wcnss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <431>, <451>;
+
+ interrupts = <0 143 1>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
new file mode 100644
index 0000000..a6634c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory State Machine
+
+The Shared Memory State Machine facilitates broadcasting of single bit state
+information between the processors in a Qualcomm SoC. Each processor is
+assigned 32 bits of state that can be modified. A processor can through a
+matrix of bitmaps signal subscription of notifications upon changes to a
+certain bit owned by a certain remote processor.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smsm"
+
+- qcom,ipc-N:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the N:th remote processor
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,local-host:
+ Usage: optional
+ Value type: <u32>
+ Definition: identifier of the local processor in the list of hosts, or
+ in other words specifier of the column in the subscription
+ matrix representing the local processor
+ defaults to host 0
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+= SUBNODES
+Each processor's state bits are described by a subnode of the smsm device node.
+Nodes can either be flagged as an interrupt-controller to denote a remote
+processor's state bits or the local processors bits. The node names are not
+important.
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the offset, in words, of the first bit for this
+ entry
+
+- #qcom,state-cells:
+ Usage: required for local entry
+ Value type: <u32>
+ Definition: must be 1 - denotes bit number
+
+- interrupt-controller:
+ Usage: required for remote entries
+ Value type: <empty>
+ Definition: marks the entry as a interrupt-controller and the state bits
+ to belong to a remote processor
+
+- #interrupt-cells:
+ Usage: required for remote entries
+ Value type: <u32>
+ Definition: must be 2 - denotes bit number and IRQ flags
+
+- interrupts:
+ Usage: required for remote entries
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying remote IRQ used by the remote processor
+ to signal changes of its state bits
+
+
+= EXAMPLE
+The following example shows the SMEM setup for controlling properties of the
+wireless processor, defined from the 8974 apps processor's point-of-view. It
+encompasses one outbound entry and the outgoing interrupt for the wireless
+processor.
+
+smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smsm: wcnss@7 {
+ reg = <7>;
+ interrupts = <0 144 1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 601a360..cc8304a 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -15,14 +15,32 @@
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+Optional properties:
+- syscon-chipselects: Handle to system control region contains QSPI
+ chipselect register and offset of that register.
+
Example:
+For am4372:
qspi: qspi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x47900000 0x100>, <0x30000000 0x3ffffff>;
+ compatible = "ti,am4372-qspi";
+ reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <25000000>;
ti,hwmods = "qspi";
};
+
+For dra7xx:
+qspi: qspi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>,
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <48000000>;
+ ti,hwmods = "qspi";
+};
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index b38200d..0dfa60d 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -1,7 +1,9 @@
* Temperature Sensor ADC (TSADC) on rockchip SoCs
Required properties:
-- compatible : "rockchip,rk3288-tsadc"
+- compatible : should be "rockchip,<name>-tsadc"
+ "rockchip,rk3288-tsadc": found on RK3288 SoCs
+ "rockchip,rk3368-tsadc": found on RK3368 SoCs
- reg : physical base address of the controller and length of memory mapped
region.
- interrupts : The interrupt number to the cpu. The interrupt specifier format
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 64083bc..8ff54eb 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -3,6 +3,7 @@
Required properties:
- compatible should contain:
+ * "mediatek,mt2701-timer" for MT2701 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt8127-timer" for MT8127 compatible timers
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..e4cd78a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -123,6 +123,7 @@
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
kinetic Kinetic Technologies
+kosagi Sutajio Ko-Usagi PTE Ltd.
lacie LaCie
lantiq Lantiq Semiconductor
lenovo Lenovo Group Ltd.
@@ -218,11 +219,13 @@
spansion Spansion Inc.
sprd Spreadtrum Communications Inc.
st STMicroelectronics
+startek Startek
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
tbs TBS Technologies
tcl Toby Churchill Ltd.
+technologic Technologic Systems
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index af9eb5b..6a00939 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -2,7 +2,11 @@
Required properties:
-- compatible : should be "mediatek,mt6589-wdt"
+- compatible should contain:
+ * "mediatek,mt2701-wdt" for MT2701 compatible watchdog timers
+ * "mediatek,mt6589-wdt" for all compatible watchdog timers (MT2701,
+ MT6589)
+
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 6a4b1af..1bba38d 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -32,6 +32,7 @@
* Intel Sunrise Point-LP (PCH)
* Intel DNV (SOC)
* Intel Broxton (SOC)
+ * Intel Lewisburg (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f8aae63..742f69d 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1583,9 +1583,6 @@
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
- no_acpi
- Don't use ACPI processor performance control objects
- _PSS and _PPC specified limits.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..cba790b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1931,7 +1931,7 @@
F: drivers/i2c/busses/i2c-at91.c
ATMEL ISI DRIVER
-M: Josh Wu <josh.wu@atmel.com>
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/platform/soc_camera/atmel-isi.c
@@ -1950,7 +1950,8 @@
F: drivers/net/ethernet/cadence/
ATMEL NAND DRIVER
-M: Josh Wu <josh.wu@atmel.com>
+M: Wenyou Yang <wenyou.yang@atmel.com>
+M: Josh Wu <rainyfeeling@outlook.com>
L: linux-mtd@lists.infradead.org
S: Supported
F: drivers/mtd/nand/atmel_nand*
@@ -2449,7 +2450,9 @@
BROADCOM STB NAND FLASH DRIVER
M: Brian Norris <computersforpeace@gmail.com>
+M: Kamal Dasu <kdasu.kdev@gmail.com>
L: linux-mtd@lists.infradead.org
+L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mtd/nand/brcmnand/
@@ -2546,7 +2549,7 @@
CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
M: David Howells <dhowells@redhat.com>
-L: linux-cachefs@redhat.com
+L: linux-cachefs@redhat.com (moderated for non-subscribers)
S: Supported
F: Documentation/filesystems/caching/cachefiles.txt
F: fs/cachefiles/
@@ -2929,10 +2932,9 @@
F: drivers/platform/x86/compal-laptop.c
CONEXANT ACCESSRUNNER USB DRIVER
-M: Simon Arlott <cxacru@fire.lp0.eu>
L: accessrunner-general@lists.sourceforge.net
W: http://accessrunner.sourceforge.net/
-S: Maintained
+S: Orphan
F: drivers/usb/atm/cxacru.c
CONFIGFS
@@ -4409,6 +4411,7 @@
FPGA MANAGER FRAMEWORK
M: Alan Tull <atull@opensource.altera.com>
+R: Moritz Fischer <moritz.fischer@ettus.com>
S: Maintained
F: drivers/fpga/
F: include/linux/fpga/fpga-mgr.h
@@ -4559,7 +4562,7 @@
FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
M: David Howells <dhowells@redhat.com>
-L: linux-cachefs@redhat.com
+L: linux-cachefs@redhat.com (moderated for non-subscribers)
S: Supported
F: Documentation/filesystems/caching/
F: fs/fscache/
@@ -5711,13 +5714,6 @@
S: Maintained
F: net/ipv4/netfilter/ipt_MASQUERADE.c
-IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-M: Francois Romieu <romieu@fr.zoreil.com>
-M: Sorbica Shieh <sorbica@icplus.com.tw>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/ethernet/icplus/ipg.*
-
IPATH DRIVER
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
@@ -6371,6 +6367,7 @@
LIGHTNVM PLATFORM SUPPORT
M: Matias Bjorling <mb@lightnvm.io>
W: http://github/OpenChannelSSD
+L: linux-block@vger.kernel.org
S: Maintained
F: drivers/lightnvm/
F: include/linux/lightnvm.h
@@ -6923,13 +6920,21 @@
F: drivers/scsi/megaraid/
MELLANOX ETHERNET DRIVER (mlx4_en)
-M: Amir Vadai <amirv@mellanox.com>
+M: Eugenia Emantayev <eugenia@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
F: drivers/net/ethernet/mellanox/mlx4/en_*
+MELLANOX ETHERNET DRIVER (mlx5e)
+M: Saeed Mahameed <saeedm@mellanox.com>
+L: netdev@vger.kernel.org
+S: Supported
+W: http://www.mellanox.com
+Q: http://patchwork.ozlabs.org/project/netdev/list/
+F: drivers/net/ethernet/mellanox/mlx5/core/en_*
+
MELLANOX ETHERNET SWITCH DRIVERS
M: Jiri Pirko <jiri@mellanox.com>
M: Ido Schimmel <idosch@mellanox.com>
@@ -7901,6 +7906,18 @@
F: net/openvswitch/
F: include/uapi/linux/openvswitch.h
+OPERATING PERFORMANCE POINTS (OPP)
+M: Viresh Kumar <vireshk@kernel.org>
+M: Nishanth Menon <nm@ti.com>
+M: Stephen Boyd <sboyd@codeaurora.org>
+L: linux-pm@vger.kernel.org
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
+F: drivers/base/power/opp/
+F: include/linux/pm_opp.h
+F: Documentation/power/opp.txt
+F: Documentation/devicetree/bindings/opp/
+
OPL4 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -9314,7 +9331,6 @@
F: include/linux/platform_data/i2c-designware.h
SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
-M: Seungwon Jeon <tgih.jun@samsung.com>
M: Jaehoon Chung <jh80.chung@samsung.com>
L: linux-mmc@vger.kernel.org
S: Maintained
diff --git a/Makefile b/Makefile
index 3a0234f..904a1d6 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 4
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Blurry Fish Butt
# *DOCUMENTATION*
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index c92c0ef..f1ac981 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index cfac24e..323486d 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index 9922a11..66191cd 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
index f761a7c..f68838e 100644
--- a/arch/arc/configs/nsim_hs_defconfig
+++ b/arch/arc/configs/nsim_hs_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
index dc6f74f..96bd1c2 100644
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ b/arch/arc/configs/nsim_hs_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 3fef0a2..fcae666 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index 5178483..b01b659 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index ef35ef3..a07f20d 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 634509e..f36c047 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -1,4 +1,4 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
+CONFIG_CROSS_COMPILE="arc-linux-"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
# CONFIG_CROSS_MEMORY_ATTACH is not set
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index ad481c2..258b0e5 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -37,6 +37,9 @@
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \
(ARCV2_IRQ_DEF_PRIO << 1))
+/* SLEEP needs default irq priority (<=) which can interrupt the doze */
+#define ISA_SLEEP_ARG (0x10 | ARCV2_IRQ_DEF_PRIO)
+
#ifndef __ASSEMBLY__
/*
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index d8c6081..c1d3645 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -43,6 +43,8 @@
#define ISA_INIT_STATUS_BITS STATUS_IE_MASK
+#define ISA_SLEEP_ARG 0x3
+
#ifndef __ASSEMBLY__
/******************************************************************
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
index c14a5be..5d446df 100644
--- a/arch/arc/kernel/ctx_sw.c
+++ b/arch/arc/kernel/ctx_sw.c
@@ -58,8 +58,6 @@
"st sp, [r24] \n\t"
#endif
- "sync \n\t"
-
/*
* setup _current_task with incoming tsk.
* optionally, set r25 to that as well
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index e248594..e6890b1 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -44,9 +44,6 @@
* don't need to do anything special to return it
*/
- /* hardware memory barrier */
- sync
-
/*
* switch to new task, contained in r1
* Temp reg r3 is required to get the ptr to store val
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 91d5a0f..a3f750e 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -44,11 +44,10 @@
void arch_cpu_idle(void)
{
/* sleep, but enable all interrupts before committing */
- if (is_isa_arcompact()) {
- __asm__("sleep 0x3");
- } else {
- __asm__("sleep 0x10");
- }
+ __asm__ __volatile__(
+ "sleep %0 \n"
+ :
+ :"I"(ISA_SLEEP_ARG)); /* can't be "r" has to be embedded const */
}
asmlinkage void ret_from_fork(void);
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 93c6ea5..7352475 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -986,42 +986,13 @@
(const u8 *)(fde +
1) +
*fde, ptrType);
- if (pc >= endLoc)
+ if (pc >= endLoc) {
fde = NULL;
- } else
- fde = NULL;
- }
- if (fde == NULL) {
- for (fde = table->address, tableSize = table->size;
- cie = NULL, tableSize > sizeof(*fde)
- && tableSize - sizeof(*fde) >= *fde;
- tableSize -= sizeof(*fde) + *fde,
- fde += 1 + *fde / sizeof(*fde)) {
- cie = cie_for_fde(fde, table);
- if (cie == &bad_cie) {
cie = NULL;
- break;
}
- if (cie == NULL
- || cie == ¬_fde
- || (ptrType = fde_pointer_type(cie)) < 0)
- continue;
- ptr = (const u8 *)(fde + 2);
- startLoc = read_pointer(&ptr,
- (const u8 *)(fde + 1) +
- *fde, ptrType);
- if (!startLoc)
- continue;
- if (!(ptrType & DW_EH_PE_indirect))
- ptrType &=
- DW_EH_PE_FORM | DW_EH_PE_signed;
- endLoc =
- startLoc + read_pointer(&ptr,
- (const u8 *)(fde +
- 1) +
- *fde, ptrType);
- if (pc >= startLoc && pc < endLoc)
- break;
+ } else {
+ fde = NULL;
+ cie = NULL;
}
}
}
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 0ee7398..daf2bf5 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -619,10 +619,10 @@
int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
if (dirty) {
- /* wback + inv dcache lines */
+ /* wback + inv dcache lines (K-mapping) */
__flush_dcache_page(paddr, paddr);
- /* invalidate any existing icache lines */
+ /* invalidate any existing icache lines (U-mapping) */
if (vma->vm_flags & VM_EXEC)
__inv_icache_page(paddr, vaddr);
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0365cbb..34e1569 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -76,6 +76,8 @@
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_REL
select NO_BOOTMEM
+ select OF_EARLY_FLATTREE if OF
+ select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PERF_USE_VMALLOC
@@ -1822,8 +1824,6 @@
bool "Flattened Device Tree support"
select IRQ_DOMAIN
select OF
- select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
help
Include support for flattened device tree machine descriptions.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index da910b2..c1ac5f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -48,8 +48,10 @@
sama5d34ek.dtb \
sama5d35ek.dtb \
sama5d36ek.dtb \
+ at91-sama5d4_ma5d4evk.dtb \
at91-sama5d4_xplained.dtb \
- at91-sama5d4ek.dtb
+ at91-sama5d4ek.dtb \
+ at91-vinco.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += \
atlas6-evb.dtb
dtb-$(CONFIG_ARCH_ATLAS7) += \
@@ -75,7 +77,10 @@
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb
+ bcm4709-netgear-r8000.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+ bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
@@ -200,12 +205,14 @@
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
+ kirkwood-nsa325.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
kirkwood-pogo_e02.dtb \
+ kirkwood-pogoplug-series-4.dtb \
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
@@ -268,7 +275,8 @@
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
- imx51-eukrea-mbimxsd51-baseboard.dtb
+ imx51-eukrea-mbimxsd51-baseboard.dtb \
+ imx51-ts4800.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-m53evk.dtb \
@@ -325,6 +333,7 @@
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
@@ -350,6 +359,8 @@
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-cl-som-imx7.dtb \
+ imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
@@ -359,6 +370,7 @@
vf610-colibri-eval-v3.dtb \
vf610m4-colibri.dtb \
vf610-cosmic.dtb \
+ vf610m4-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
@@ -459,13 +471,16 @@
am335x-bone.dtb \
am335x-boneblack.dtb \
am335x-bonegreen.dtb \
- am335x-sl50.dtb \
+ am335x-chiliboard.dtb \
+ am335x-cm-t335.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
+ am335x-lxm.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
- am335x-lxm.dtb \
- am335x-chiliboard.dtb \
+ am335x-shc.dtb \
+ am335x-sbc-t335.dtb \
+ am335x-sl50.dtb \
am335x-wega-rdk.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
@@ -478,17 +493,21 @@
omap4-var-stk-om44.dtb
dtb-$(CONFIG_SOC_AM43XX) += \
am43x-epos-evm.dtb \
- am437x-sk-evm.dtb \
+ am437x-cm-t43.dtb \
+ am437x-gp-evm.dtb \
am437x-idk-evm.dtb \
- am437x-gp-evm.dtb
+ am437x-sbc-t43.dtb \
+ am437x-sk-evm.dtb
dtb-$(CONFIG_SOC_OMAP5) += \
omap5-cm-t54.dtb \
omap5-igep0050.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += \
- dra7-evm.dtb \
am57xx-beagle-x15.dtb \
+ am57xx-cl-som-am57x.dtb \
+ am57xx-sbc-am57x.dtb \
+ dra7-evm.dtb \
dra72-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-d2-network.dtb \
@@ -502,6 +521,7 @@
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
+ qcom-apq8064-sony-xperia-yuga.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -510,12 +530,16 @@
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
- arm-realview-pb1176.dtb
+ arm-realview-pb1176.dtb \
+ arm-realview-pb11mp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ rk3036-evb.dtb \
+ rk3036-kylin.dtb \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
+ rk3228-evb.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
@@ -523,8 +547,10 @@
rk3288-popmetal.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
+ rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
+ rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
rk3288-veyron-speedy.dtb
@@ -547,7 +573,6 @@
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
- r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7793-gose.dtb \
@@ -557,6 +582,7 @@
dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
+ socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_de0_sockit.dtb \
socfpga_cyclone5_sockit.dtb \
@@ -751,6 +777,7 @@
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-388-clearfog.dtb \
armada-388-db.dtb \
armada-388-gp.dtb \
armada-388-rd.dtb
@@ -774,6 +801,7 @@
dove-dove-db.dtb \
dove-sbc-a510.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt2701-evb.dtb \
mt6580-evbp1.dtb \
mt6589-aquaris5.dtb \
mt6592-evb.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 7d36601..ded1eb6 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -56,175 +56,171 @@
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
- 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
- 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
- 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
- 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
- 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
- 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
- 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
- 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+ AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
+ AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
- 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
- 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */
- 0x184 0x28 /* uart1_txd, INPUT | MODE0 */
- /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */
- /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */
- 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
- 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
- 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
- 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
- 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
- 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
- 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
- /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
- /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
- 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
- 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
- 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
- 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
- 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
- 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 5d370d5..f3db13d 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -67,112 +67,112 @@
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
};
@@ -285,10 +285,8 @@
};
};
-
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@@ -309,12 +307,17 @@
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -324,6 +327,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -333,21 +337,25 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index eadbba3..55c0e95 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -36,32 +36,32 @@
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
- 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
index 0f65bda..dce3c86 100644
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -36,8 +36,8 @@
&am33xx_pinmux {
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20..15d47ab 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -37,26 +37,26 @@
&am33xx_pinmux {
usb1_drvvbus: usb1_drvvbus {
pinctrl-single,pins = <
- 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
>;
};
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
led_gpio_pins: led_gpio_pins {
pinctrl-single,pins = <
- 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
- 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 7e9a34d..fda457b 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -29,81 +29,81 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins: nandflash_pins {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
@@ -128,16 +128,21 @@
};
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -147,6 +152,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -156,24 +162,28 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644
index 0000000..42e9b66
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,396 @@
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "CompuLab CM-T335";
+ compatible = "compulab,cm-t335", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_led_pins>;
+ led@0 {
+ label = "cm_t335:green";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* regulator for mmc */
+ vmmc_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 0>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_pins>;
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ /* uart0_ctsn.i2c1_sda */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
+ /* uart0_rtsn.i2c1_scl */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
+ >;
+ };
+
+ gpio_led_pins: pinmux_gpio_led_pins {
+ pinctrl-single,pins = <
+ /* gpmc_csn3.gpio2_0 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins: pinmux_nandflash_pins {
+ pinctrl-single,pins = <
+ /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
+ /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_ben0_cle.gpmc_ben0_cle */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
+ /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ ecap0_pins: pinmux_ecap0_pins {
+ pinctrl-single,pins = <
+ /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM33XX_IOPAD(0x964, 0x0)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ /* mii1_tx_en.rgmii1_tctl */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ /* wl1271 bluetooth */
+ bluetooth_pins: pinmux_bluetooth_pins {
+ pinctrl-single,pins = <
+ /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ /* CM-T335 board EEPROM */
+ eeprom: 24c02@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ /* Real Time Clock */
+ ext_rtc: em3027@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&epwmss0 {
+ status = "okay";
+
+ ecap0: ecap@48300100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "spl";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@1 {
+ label = "uboot";
+ reg = <0x00200000 0x00100000>;
+ };
+ partition@2 {
+ label = "uboot environment";
+ reg = <0x00300000 0x00100000>;
+ };
+ partition@3 {
+ label = "dtb";
+ reg = <0x00400000 0x00100000>;
+ };
+ partition@4 {
+ label = "splash";
+ reg = <0x00500000 0x00400000>;
+ };
+ partition@5 {
+ label = "linux";
+ reg = <0x00900000 0x00600000>;
+ };
+ partition@6 {
+ label = "rootfs";
+ reg = <0x00F00000 0>;
+ };
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ slaves = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d9d00ab..0d6a68c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -83,14 +83,14 @@
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -168,215 +168,215 @@
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 0x0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM33XX_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
- 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
- 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
- 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
- 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */
+ AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
>;
};
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
- 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
- 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
};
@@ -743,8 +743,8 @@
&mmc3 {
/* these are on the crossbar and are outlined in the
xbar-event-map element */
- dmas = <&edma 12
- &edma 13>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
dma-names = "tx", "rx";
status = "okay";
vmmc-supply = <&wlan_en_reg>;
@@ -766,11 +766,6 @@
};
};
-&edma {
- ti,edma-xbar-event-map = /bits/ 16 <1 12
- 2 13>;
-};
-
&sham {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 89442e9..282fe1b 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -123,7 +123,7 @@
label = "button2";
linux,code = <0x102>;
gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
- gpio-key,wakeup;
+ wakeup-source;
};
switch@4 {
@@ -204,234 +204,234 @@
lcd_pins_default: lcd_pins_default {
pinctrl-single,pins = <
- 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
lcd_pins_sleep: lcd_pins_sleep {
pinctrl-single,pins = <
- 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
- 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
- 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
- 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
- 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
- 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
- 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
- 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
- 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
- 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
- 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
- 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
- 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
- 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
- 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
- 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
- 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
- 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
- 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
- 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
- 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
- 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
- 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
- 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
- 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
- 0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
- 0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
- 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
>;
};
gpio_keys_s0: gpio_keys_s0 {
pinctrl-single,pins = <
- 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
- 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
- 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
- 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
+ AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */
+ AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
ecap2_pins: backlight_pins {
pinctrl-single,pins = <
- 0x19c 0x4 /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+ AM33XX_IOPAD(0x99c, MUX_MODE4) /* mcasp0_ahclkr.ecap2_in_pwm2_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 5c5667a..d97b0ef 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -46,109 +46,109 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
- 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
- 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
- 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
- 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
- 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
- 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
- 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6..77559a1 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -41,121 +41,121 @@
misc_pins: misc_pins {
pinctrl-single,pins = <
- 0x15c (PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
+ AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7) /* spi0_cs0.gpio0_5 */
>;
};
gpmc_pins: gpmc_pins {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x20 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
- 0x24 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
- 0x28 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
- 0x2c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
- 0x30 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
- 0x34 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
- 0x38 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
- 0x3c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad8.gpmc_ad8 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad9.gpmc_ad9 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad10.gpmc_ad10 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad11.gpmc_ad11 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad12.gpmc_ad12 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad13.gpmc_ad13 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad14.gpmc_ad14 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad15.gpmc_ad15 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x80 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
- 0x84 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
- 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn1.gpmc_csn1 */
+ AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn2.gpmc_csn2 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn3.gpmc_csn3 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0_cle.gpmc_ben0_cle */
- 0xa4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
- 0xac (PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
- 0xbc (PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1) /* lcd_data1.gpmc_a1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1) /* lcd_data2.gpmc_a2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1) /* lcd_data3.gpmc_a3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1) /* lcd_data4.gpmc_a4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1) /* lcd_data5.gpmc_a5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1) /* lcd_data6.gpmc_a6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1) /* lcd_data7.gpmc_a7 */
- 0xe0 (PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
- 0xe4 (PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
- 0xe8 (PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1) /* lcd_vsync.gpmc_a8 */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1) /* lcd_hsync.gpmc_a9 */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1) /* lcd_pclk.gpmc_a10 */
>;
};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: uart1_pins {
pinctrl-single,pins = <
- 0x178 (PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
- 0x17c (PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- 0xc0 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
- 0xc4 (PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
- 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_data8.gpio2[14] */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7) /* lcd_data9.gpio2[15] */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
- 0xc8 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
- 0xcc (PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
- 0x160 (PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
- 0x164 (PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
+ AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data10.uart3_ctsn */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6) /* lcd_data11.uart3_rtsn */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1) /* spi0_cs1.uart3_rxd */
+ AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
>;
};
uart4_pins: uart4_pins {
pinctrl-single,pins = <
- 0xd0 (PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
- 0xd4 (PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
- 0x168 (PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
- 0x16c (PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
+ AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6) /* lcd_data12.uart4_ctsn */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6) /* lcd_data13.uart4_rtsn */
+ AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1) /* uart0_ctsn.uart4_rxd */
+ AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1) /* uart0_rtsn.uart4_txd */
>;
};
uart5_pins: uart5_pins {
pinctrl-single,pins = <
- 0xd8 (PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
- 0x144 (PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
+ AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4) /* lcd_data14.uart5_rxd */
+ AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3) /* rmiii1_refclk.uart5_txd */
>;
};
mmc1_pins: mmc1_pins {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
- 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18] */
>;
};
};
@@ -375,11 +375,15 @@
wp-gpios = <&gpio3 18 0>;
};
-#include "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
@@ -388,6 +392,7 @@
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
@@ -397,6 +402,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
@@ -406,6 +412,7 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@@ -414,6 +421,7 @@
};
ldo2_reg: regulator@4 {
+ reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@@ -422,6 +430,7 @@
};
ldo3_reg: regulator@5 {
+ reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@@ -430,6 +439,7 @@
};
ldo4_reg: regulator@6 {
+ reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114..471a3a7 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1 {
pinctrl-single,pins = <
- 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
+ AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */
>;
};
};
@@ -130,7 +130,7 @@
&am33xx_pinmux {
accel_pins: pinmux_accel {
pinctrl-single,pins = <
- 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
+ AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
>;
};
};
@@ -177,12 +177,12 @@
&am33xx_pinmux {
audio_pins: pinmux_audio {
pinctrl-single,pins = <
- 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
- 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
- 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
- 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
- 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
- 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
+ AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */
>;
};
};
@@ -228,36 +228,36 @@
&am33xx_pinmux {
lcd_pins: pinmux_lcd {
pinctrl-single,pins = <
- 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
- 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
- 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
- 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
- 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
- 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
- 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
- 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
- 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
- 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
- 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
- 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
- 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
- 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
- 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
- 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
- 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
- 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
- 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
- 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
- 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
- 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
- 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
/* Display Enable */
- 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
};
@@ -291,29 +291,29 @@
&am33xx_pinmux {
ethernet_pins: pinmux_ethernet {
pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
/* ethernet interrupt */
- 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */
/* ethernet PHY nReset */
- 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
+ AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
};
@@ -339,13 +339,6 @@
ti,non-removable;
};
-&edma {
- /* Map eDMA MMC2 Events from Crossbar */
- ti,edma-xbar-event-map = /bits/ 16 <1 12
- 2 13>;
-};
-
-
&mmc3 {
/* Wifi & Bluetooth on MMC #3 */
status = "okay";
@@ -354,8 +347,8 @@
vmmmc-supply = <&v3v3c_reg>;
bus-width = <4>;
ti,non-removable;
- dmas = <&edma 12
- &edma 13>;
+ dmas = <&edma_xbar 12 0 1
+ &edma_xbar 13 0 2>;
dma-names = "tx", "rx";
};
@@ -363,45 +356,45 @@
&am33xx_pinmux {
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
emmc_pins: pinmux_emmc {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
/* EMMC nReset */
- 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
>;
};
wireless_pins: pinmux_wireless {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
- 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */
+ AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */
/* WLAN nReset */
- 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
/* WLAN nPower down */
- 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
+ AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */
/* 32kHz Clock */
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
};
@@ -427,9 +420,9 @@
vin-supply = <&vbat>;
};
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@@ -437,12 +430,17 @@
};
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -452,6 +450,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -461,18 +460,21 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
@@ -480,6 +482,7 @@
};
ldo4_reg: regulator@6 {
+ reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;
@@ -497,10 +500,10 @@
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
- 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
- 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
>;
};
};
@@ -538,16 +541,16 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1 {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
};
@@ -590,9 +593,9 @@
usb_pins: pinmux_usb {
pinctrl-single,pins = <
/* USB0 Over-Current (active low) */
- 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */
/* USB1 Over-Current (active low) */
- 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
>;
};
};
@@ -627,37 +630,37 @@
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
button@1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
buttons@2 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
&am33xx_pinmux {
user_leds_pins: pinmux_user_leds {
pinctrl-single,pins = <
- 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
- 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
>;
};
user_buttons_pins: pinmux_user_buttons {
pinctrl-single,pins = <
- 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
- 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 2f43e45..c20ae6c 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -56,22 +56,22 @@
&am33xx_pinmux {
ethernet0_pins: pinmux_ethernet0 {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
>;
};
mdio_pins: pinmux_mdio {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
};
@@ -103,8 +103,8 @@
&am33xx_pinmux {
i2c0_pins: pinmux_i2c0 {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
};
@@ -137,20 +137,20 @@
&am33xx_pinmux {
nandflash_pins: pinmux_nandflash {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
@@ -324,10 +324,10 @@
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
new file mode 100644
index 0000000..917d7cc
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -0,0 +1,219 @@
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+ model = "CompuLab CM-T335 on SB-T335";
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+ /* DRM display driver */
+ panel {
+ compatible = "ti,tilcdc,panel";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_pins_default>;
+ pinctrl-1 = <&lcd_pins_sleep>;
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <32>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ /* Timing selection performed by U-Boot */
+ timing0: lcd {/* 800x480p62 */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ timing1: dvi { /* 1024x768p60 */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ hfront-porch = <24>;
+ hback-porch = <160>;
+ hsync-len = <136>;
+ vactive = <768>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+};
+
+&am33xx_pinmux {
+ /* Display */
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+ /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
+ /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ lcd_pins_sleep: lcd_pins_sleep {
+ pinctrl-single,pins = <
+ /* gpmc_ad8.lcd_data23 */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad9.lcd_data22 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad10.lcd_data21 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad11.lcd_data20 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad12.lcd_data19 */
+ AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad13.lcd_data18 */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad14.lcd_data17 */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* gpmc_ad15.lcd_data16 */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)
+ /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)
+ /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+};
+
+&i2c0 {
+ /* GPIO extender */
+ gpio_ext: pca9555@26 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x26>;
+ dvi_ena {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "dvi-enable";
+ };
+ lcd_ena {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "lcd-enable";
+ };
+ };
+};
+
+/* Display */
+&lcdc {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 0000000..1b5b044
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,577 @@
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Bosch SHC";
+ compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+ aliases {
+ mmcblk0 = &mmc1;
+ mmcblk1 = &mmc2;
+ };
+
+ cpus {
+ cpu@0 {
+ /*
+ * To consider voltage drop between PMIC and SoC,
+ * tolerance value is reduced to 2% from 4% and
+ * voltage value is increased as a precaution.
+ */
+ operating-points = <
+ /* kHz uV */
+ 594000 1225000
+ 294000 1125000
+ >;
+ voltage-tolerance = <2>; /* 2 percentage */
+ cpu0-supply = <&dcdc2_reg>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ back_button {
+ label = "Back Button";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_BACK>;
+ debounce-interval = <1000>;
+ gpio-key,wakeup;
+ };
+
+ front_button {
+ label = "Front Button";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_FRONT>;
+ debounce-interval = <1000>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ compatible = "gpio-leds";
+
+ led@1 {
+ label = "shc:power:red";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "shc:power:bl";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+
+ led@3 {
+ label = "shc:lan:red";
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@4 {
+ label = "shc:lan:bl";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@5 {
+ label = "shc:cloud:red";
+ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@6 {
+ label = "shc:cloud:bl";
+ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ vmmcsd_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&aes {
+ status = "okay";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+
+ ethernetphy0: ethernet-phy@0 {
+ reg = <0>;
+ smsc,disable-energy-detect;
+ };
+};
+
+&epwmss1 {
+ status = "okay";
+
+ ehrpwm1: ehrpwm@48302200 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ehrpwm1_pins>;
+ status = "okay";
+ };
+};
+
+&gpio1 {
+ hmtc_rst {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_reset";
+ };
+
+ hmtc_prog {
+ gpio-hog;
+ gpios = <27 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "homematic_program";
+ };
+};
+
+&gpio3 {
+ zgb_rst {
+ gpio-hog;
+ gpios = <18 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "zigbee_reset";
+ };
+
+ zgb_boot {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "zigbee_boot";
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@24 {
+ reg = <0x24>;
+ };
+
+ at24@50 {
+ compatible = "at24,24c32";
+ pagesize = <32>;
+ reg = <0x50>;
+ };
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ status = "okay";
+ slaves = <1>;
+ cpsw_emac0: slave@4a100200 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+ phy-handle = <ðernetphy0>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <0x4>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+ max-frequency = <26000000>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+ bus-width = <4>;
+ cap-power-off-card;
+ max-frequency = <26000000>;
+ sd-uhs-sdr25;
+ vmmc-supply = <&vmmcsd_fixed>;
+ status = "okay";
+};
+
+&rtc {
+ ti,no-init;
+};
+
+&sham {
+ status = "okay";
+};
+
+&tps {
+ compatible = "ti,tps65217";
+ ti,pmic-shutdown-controller;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-name = "vdds_dpr";
+ regulator-compatible = "dcdc1";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ /*
+ * VDD_MPU voltage limits 0.95V - 1.26V with
+ * +/-4% tolerance
+ */
+ regulator-compatible = "dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <70000>;
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ /*
+ * VDD_CORE voltage limits 0.95V - 1.1V with
+ * +/-4% tolerance
+ */
+ regulator-name = "vdd_core";
+ regulator-compatible = "dcdc3";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-name = "vio,vrtc,vdds";
+ regulator-compatible = "ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-name = "vdd_3v3aux";
+ regulator-compatible = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-name = "vdd_1v8";
+ regulator-compatible = "ldo3";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-name = "vdd_3v3a";
+ regulator-compatible = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkout2_pin>;
+
+ clkout2_pin: pinmux_clkout2_pin {
+ pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ ehrpwm1_pins: pinmux_ehrpwm1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+ >;
+ };
+
+ mmc3_pins: pinmux_mmc3_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
+ AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
+ AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+ >;
+ };
+
+ uart4_pins: pinmux_uart4_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
+ AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+ >;
+ };
+
+ user_leds_s0: user_leds_s0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 3303c28..d38edfa 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -375,16 +375,19 @@
pinctrl-0 = <&uart4_pins>;
};
-#include "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -392,6 +395,7 @@
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -401,6 +405,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -410,6 +415,7 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
@@ -417,6 +423,7 @@
};
ldo2_reg: regulator@4 {
+ reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
@@ -424,6 +431,7 @@
};
ldo3_reg: regulator@5 {
+ reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -431,6 +439,7 @@
};
ldo4_reg: regulator@6 {
+ reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 2cecb39..282f6d4 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -28,8 +28,8 @@
&am33xx_pinmux {
dcan1_pins: pinmux_dcan1 {
pinctrl-single,pins = <
- 0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
- 0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
>;
};
};
@@ -44,20 +44,20 @@
&am33xx_pinmux {
ethernet1_pins: pinmux_ethernet1 {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */
- 0x48 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */
- 0x4c (PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */
- 0x50 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */
- 0x54 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
- 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */
>;
};
};
@@ -79,13 +79,13 @@
&am33xx_pinmux {
mmc1_pins: pinmux_mmc1 {
pinctrl-single,pins = <
- 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
>;
};
};
@@ -103,17 +103,17 @@
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
- 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
>;
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d23e252..04885f9 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -161,6 +161,14 @@
mboxes = <&mailbox &mbox_wkupm3>;
};
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ dma-masters = <&edma>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -174,12 +182,44 @@
};
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x40>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <12 13 14>;
- #dma-cells = <1>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
};
gpio0: gpio@44e07000 {
@@ -233,7 +273,7 @@
reg = <0x44e09000 0x2000>;
interrupts = <72>;
status = "disabled";
- dmas = <&edma 26>, <&edma 27>;
+ dmas = <&edma 26 0>, <&edma 27 0>;
dma-names = "tx", "rx";
};
@@ -244,7 +284,7 @@
reg = <0x48022000 0x2000>;
interrupts = <73>;
status = "disabled";
- dmas = <&edma 28>, <&edma 29>;
+ dmas = <&edma 28 0>, <&edma 29 0>;
dma-names = "tx", "rx";
};
@@ -255,7 +295,7 @@
reg = <0x48024000 0x2000>;
interrupts = <74>;
status = "disabled";
- dmas = <&edma 30>, <&edma 31>;
+ dmas = <&edma 30 0>, <&edma 31 0>;
dma-names = "tx", "rx";
};
@@ -322,8 +362,8 @@
ti,dual-volt;
ti,needs-special-reset;
ti,needs-special-hs-handling;
- dmas = <&edma 24
- &edma 25>;
+ dmas = <&edma_xbar 24 0 0
+ &edma_xbar 25 0 0>;
dma-names = "tx", "rx";
interrupts = <64>;
interrupt-parent = <&intc>;
@@ -335,8 +375,8 @@
compatible = "ti,omap4-hsmmc";
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
+ dmas = <&edma 2 0
+ &edma 3 0>;
dma-names = "tx", "rx";
interrupts = <28>;
interrupt-parent = <&intc>;
@@ -474,10 +514,10 @@
interrupts = <65>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi0";
- dmas = <&edma 16
- &edma 17
- &edma 18
- &edma 19>;
+ dmas = <&edma 16 0
+ &edma 17 0
+ &edma 18 0
+ &edma 19 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -490,10 +530,10 @@
interrupts = <125>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi1";
- dmas = <&edma 42
- &edma 43
- &edma 44
- &edma 45>;
+ dmas = <&edma 42 0
+ &edma 43 0
+ &edma 44 0
+ &edma 45 0>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -819,6 +859,8 @@
ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
+ dmas = <&edma 52>;
+ dma-names = "rxtx";
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
@@ -831,7 +873,7 @@
ti,hwmods = "sham";
reg = <0x53100000 0x200>;
interrupts = <109>;
- dmas = <&edma 36>;
+ dmas = <&edma 36 0>;
dma-names = "rx";
};
@@ -840,8 +882,8 @@
ti,hwmods = "aes";
reg = <0x53500000 0xa0>;
interrupts = <103>;
- dmas = <&edma 6>,
- <&edma 5>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
dma-names = "tx", "rx";
};
@@ -854,8 +896,8 @@
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
dma-names = "tx", "rx";
};
@@ -868,8 +910,8 @@
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
dma-names = "tx", "rx";
};
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index 2d40b3f..cb7de1d 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -77,7 +77,7 @@
&omap3_pmx_core {
tps_pins: pinmux_tps_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
>;
};
};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d83ff9c..dcae0d6 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -30,6 +30,7 @@
serial5 = &uart5;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
+ spi0 = &qspi;
};
cpus {
@@ -171,6 +172,14 @@
mboxes = <&mailbox &mbox_wkupm3>;
};
+ edma_xbar: dma-router@f90 {
+ compatible = "ti,am335x-edma-crossbar";
+ reg = <0xf90 0x40>;
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&edma>;
+ };
+
scm_clockdomains: clockdomains {
};
};
@@ -183,14 +192,46 @@
};
edma: edma@49000000 {
- compatible = "ti,edma3";
- ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
- reg = <0x49000000 0x10000>,
- <0x44e10f90 0x10>;
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 0>;
+
+ ti,edma-memcpy-channels = <32 33>;
+ };
+
+ edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+
+ edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
};
uart0: serial@44e09000 {
@@ -495,8 +536,8 @@
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
- dmas = <&edma 24
- &edma 25>;
+ dmas = <&edma 24 0>,
+ <&edma 25 0>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -507,8 +548,8 @@
reg = <0x481d8000 0x1000>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
- dmas = <&edma 2
- &edma 3>;
+ dmas = <&edma 2 0>,
+ <&edma 3 0>;
dma-names = "tx", "rx";
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -776,7 +817,7 @@
compatible = "ti,omap5-sham";
ti,hwmods = "sham";
reg = <0x53100000 0x300>;
- dmas = <&edma 36>;
+ dmas = <&edma 36 0>;
dma-names = "rx";
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -786,8 +827,8 @@
ti,hwmods = "aes";
reg = <0x53501000 0xa0>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 6
- &edma 5>;
+ dmas = <&edma 6 0>,
+ <&edma 5 0>;
dma-names = "tx", "rx";
};
@@ -796,8 +837,8 @@
ti,hwmods = "des";
reg = <0x53701000 0xa0>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma 34
- &edma 33>;
+ dmas = <&edma 34 0>,
+ <&edma 33 0>;
dma-names = "tx", "rx";
};
@@ -810,8 +851,8 @@
interrupts = <80>, <81>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 8>,
- <&edma 9>;
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
dma-names = "tx", "rx";
};
@@ -824,8 +865,8 @@
interrupts = <82>, <83>;
interrupt-names = "tx", "rx";
status = "disabled";
- dmas = <&edma 10>,
- <&edma 11>;
+ dmas = <&edma 10 2>,
+ <&edma 11 2>;
dma-names = "tx", "rx";
};
@@ -842,6 +883,8 @@
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
+ dmas = <&edma 52>;
+ dma-names = "rxtx";
clocks = <&l3s_gclk>;
clock-names = "fck";
reg = <0x50000000 0x2000>;
@@ -963,7 +1006,9 @@
qspi: qspi@47900000 {
compatible = "ti,am4372-qspi";
- reg = <0x47900000 0x100>;
+ reg = <0x47900000 0x100>,
+ <0x30000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
new file mode 100644
index 0000000..8677f4c
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -0,0 +1,422 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+ model = "CompuLab CM-T43";
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ledb {
+ label = "cm-t43:green";
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vmmc_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
+};
+
+&am43xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cm_t43_led_pins>;
+
+ cm_t43_led_pins: cm_t43_led_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa78, MUX_MODE7)
+ >;
+ };
+
+ i2c0_pins: i2c0_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ emmc_pins: emmc_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+ AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+ AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+ AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+ AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+ AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+ AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+ AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ >;
+ };
+
+ nand_flash_x8: nand_flash_x8 {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM4372_IOPAD(0xa74, MUX_MODE3)
+ /* Slave 2 */
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.txen */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rxctl */
+ AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.txd3 */
+ AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.txd2 */
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.txd1 */
+ AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.txd0 */
+ AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.tclk */
+ AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rclk */
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rxd3 */
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rxd2 */
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rxd1 */
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rxd0 */
+ AM4372_IOPAD(0xa38, MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_flash_x8>;
+ ranges = <0 0 0x08000000 0x1000000>;
+ nand@0,0 {
+ reg = <0 0 0>;
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ gpmc,wait-pin = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* MTD partition table */
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x00980000>;
+ };
+ partition@980000 {
+ label = "dtb";
+ reg = <0x00980000 0x00080000>;
+ };
+ partition@a00000 {
+ label = "rootfs";
+ reg = <0x00a00000 0x0>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <100000>;
+
+ tps65218: tps65218@24 {
+ compatible = "ti,tps65218";
+ reg = <0x24>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ dcdc1: regulator-dcdc1 {
+ compatible = "ti,tps65218-dcdc1";
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc2: regulator-dcdc2 {
+ compatible = "ti,tps65218-dcdc2";
+ regulator-name = "vdd_mpu";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1378000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3: regulator-dcdc3 {
+ compatible = "ti,tps65218-dcdc3";
+ regulator-name = "vdcdc3";
+ regulator-suspend-enable;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: regulator-ldo1 {
+ compatible = "ti,tps65218-ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+
+ eeprom_module: at24@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&mmc2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmc_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ dmas = <&edma 16
+ &edma 17>;
+ dma-names = "tx0", "rx0";
+
+ flash: w25q64cvzpig@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x100000>;
+ };
+ };
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <2>;
+};
+
+&dwc3_1 {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&dwc3_2 {
+ status = "okay";
+};
+
+&usb2_phy2 {
+ status = "okay";
+};
+
+&usb2 {
+ dr_mode = "host";
+ status = "okay";
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordiante-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ ti,adc-channels = <4 5 6 7>;
+ };
+};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+ operating-points = <1000000 1330000>,
+ <800000 1260000>,
+ <720000 1200000>,
+ <600000 1100000>,
+ <300000 950000>;
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index d2450ab..64d4332 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -154,138 +154,138 @@
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
- 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
+ AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
- 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
- 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
- 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
- 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
- 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
- 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
@@ -293,208 +293,208 @@
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPIO 5_8 to select LCD / HDMI */
- 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
dcan0_default: dcan0_default_pins {
pinctrl-single,pins = <
- 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
+ AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
>;
};
dcan0_sleep: dcan0_sleep_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
>;
};
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
- 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
- 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
+ AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
>;
};
dcan1_sleep: dcan1_sleep_pins {
pinctrl-single,pins = <
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
- 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
>;
};
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
- 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
- 0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
- 0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
- 0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
- 0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
- 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
- 0x20C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
- 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
- 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
- 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
- 0x21C (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
- 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
- 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
>;
};
vpfe0_pins_sleep: vpfe0_pins_sleep {
pinctrl-single,pins = <
- 0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
- 0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
- 0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
- 0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
- 0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
- 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
- 0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
- 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
- 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
- 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
- 0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
- 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
- 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
+ AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
- 0x1CC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
- 0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
- 0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
- 0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
- 0x1DC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
- 0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
- 0x1EC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
- 0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
- 0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
- 0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
- 0x1FC (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
- 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
- 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
+ AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
+ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
+ AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
+ AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
+ AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
- 0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
- 0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
- 0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
- 0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
- 0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
- 0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
- 0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
- 0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
- 0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
- 0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
- 0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
- 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
- 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
+ AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
+ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
+ AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
+ AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
+ AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
+ AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
+ AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
+ AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
+ AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
+ AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
+ AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
+ AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
+ AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
>;
};
mmc3_pins_default: pinmux_mmc3_pins_default {
pinctrl-single,pins = <
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
- 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
- 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
- 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
+ AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
+ AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
>;
};
mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
pinctrl-single,pins = <
- 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
- 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
- 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
+ AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
+ AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
>;
};
wlan_pins_default: pinmux_wlan_pins_default {
pinctrl-single,pins = <
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
- 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
>;
};
wlan_pins_sleep: pinmux_wlan_pins_sleep {
pinctrl-single,pins = <
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
- 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
- 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
+ AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
+ AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
- 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
- 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
- 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
- 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+ AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
+ AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+ AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
+ AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
gpio0_pins: gpio0_pins {
pinctrl-single,pins = <
- 0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+ AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
>;
};
emmc_pins_default: emmc_pins_default {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
>;
};
emmc_pins_sleep: emmc_pins_sleep {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
- 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
- 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
- 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
- 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
- 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+ AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+ AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
>;
};
};
@@ -734,8 +734,8 @@
status = "okay";
/* these are on the crossbar and are outlined in the
xbar-event-map element */
- dmas = <&edma 30
- &edma 31>;
+ dmas = <&edma_xbar 30 0 1>,
+ <&edma_xbar 31 0 2>;
dma-names = "tx", "rx";
vmmc-supply = <&vmmcwl_fixed>;
bus-width = <4>;
@@ -756,11 +756,6 @@
};
};
-&edma {
- ti,edma-xbar-event-map = /bits/ 16 <1 30
- 2 31>;
-};
-
&uart3 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 337fb91..76dcfc6 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -122,137 +122,137 @@
&am43xx_pinmux {
gpio_keys_pins_default: gpio_keys_pins_default {
pinctrl-single,pins = <
- 0x1b8 (PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */
+ AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7) /* cam0_field.gpio4_2 */
>;
};
i2c0_pins_default: i2c0_pins_default {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c0_pins_sleep: i2c0_pins_sleep {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
i2c2_pins_default: i2c2_pins_default {
pinctrl-single,pins = <
- 0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
- 0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+ AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+ AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
>;
};
i2c2_pins_sleep: i2c2_pins_sleep {
pinctrl-single,pins = <
- 0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
pinctrl-single,pins = <
- 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
ecap0_pins_default: backlight_pins_default {
pinctrl-single,pins = <
- 0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+ AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
- 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
qspi_pins_default: qspi_pins_default {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
- 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
>;
};
qspi_pins_sleep: qspi_pins_sleep{
pinctrl-single,pins = <
- 0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
new file mode 100644
index 0000000..5f750c0
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CM-T43 on SB-SOM-T43";
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+ aliases {
+ display0 = &lcd0;
+ };
+};
+
+&am43xx_pinmux {
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+ >;
+ };
+
+ dss_pinctrl_default: dss_pinctrl_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+ AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+
+ uart0_pins_default: uart0_pins_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+ AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+ AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ i2c1_pins: i2c1_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */
+ AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */
+ >;
+ };
+
+ i2c2_pins: i2c2_pins {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ >;
+ };
+
+ usb2_phy1_default: usb2_phy1_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ usb2_phy2_default: usb2_phy2_default {
+ pinctrl-single,pins = <
+ AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eeprom_base: at24@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+ status = "okay";
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vsb_3v3>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_pinctrl_default>;
+
+ port {
+ dpi_lcd_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 28 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 63de2a1..d82dd6e 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -157,259 +157,259 @@
&am43xx_pinmux {
matrix_keypad_pins: matrix_keypad_pins {
pinctrl-single,pins = <
- 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
- 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
- 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
- 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
+ AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */
+ AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */
+ AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */
+ AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */
>;
};
leds_pins: leds_pins {
pinctrl-single,pins = <
- 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
- 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
- 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
- 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
+ AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */
+ AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */
+ AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */
+ AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */
>;
};
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
- 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+ AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
>;
};
edt_ft5306_ts_pins: edt_ft5306_ts_pins {
pinctrl-single,pins = <
- 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
- 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
+ AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */
>;
};
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
- 0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
- 0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
- 0x1bc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
- 0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
- 0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
- 0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
- 0x208 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
- 0x20c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
- 0x210 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
- 0x214 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
- 0x218 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
- 0x21c (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
- 0x220 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
- 0x224 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
+ AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
+ AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
+ AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_field mode 0*/
+ AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_wen mode 0*/
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
+ AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
+ AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
+ AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
+ AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
+ AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
+ AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
+ AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
+ AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
+ AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
>;
};
vpfe0_pins_sleep: vpfe0_pins_sleep {
pinctrl-single,pins = <
- 0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x12c (PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
- 0x114 (PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
- 0x128 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
- 0x124 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
- 0x120 (PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
- 0x11c (PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
- 0x130 (PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
- 0x118 (PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
- 0x140 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
- 0x13c (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
- 0x138 (PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
- 0x134 (PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
+ AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
+ AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
+ AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
+ AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
+ AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */
+ AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */
+ AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
+ AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
+ AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
+ AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */
+ AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */
/* Slave 2 */
- 0x58 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x40 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x54 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x50 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x4c (PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x48 (PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x5c (PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x44 (PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
- 0x6c (PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
- 0x68 (PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x64 (PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x60 (PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */
+ AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT | MUX_MODE1)
- 0x028 (PIN_OUTPUT | MUX_MODE1)
- 0x02c (PIN_OUTPUT | MUX_MODE1)
- 0x030 (PIN_OUTPUT | MUX_MODE1)
- 0x034 (PIN_OUTPUT | MUX_MODE1)
- 0x038 (PIN_OUTPUT | MUX_MODE1)
- 0x03c (PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
- 0x0a0 (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
- 0x0a4 (PIN_OUTPUT | MUX_MODE0)
- 0x0a8 (PIN_OUTPUT | MUX_MODE0)
- 0x0ac (PIN_OUTPUT | MUX_MODE0)
- 0x0b0 (PIN_OUTPUT | MUX_MODE0)
- 0x0b4 (PIN_OUTPUT | MUX_MODE0)
- 0x0b8 (PIN_OUTPUT | MUX_MODE0)
- 0x0bc (PIN_OUTPUT | MUX_MODE0)
- 0x0c0 (PIN_OUTPUT | MUX_MODE0)
- 0x0c4 (PIN_OUTPUT | MUX_MODE0)
- 0x0c8 (PIN_OUTPUT | MUX_MODE0)
- 0x0cc (PIN_OUTPUT | MUX_MODE0)
- 0x0d0 (PIN_OUTPUT | MUX_MODE0)
- 0x0d4 (PIN_OUTPUT | MUX_MODE0)
- 0x0d8 (PIN_OUTPUT | MUX_MODE0)
- 0x0dc (PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
- 0x0e0 (PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
- 0x0e4 (PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
- 0x0e8 (PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
- 0x0ec (PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
qspi_pins: qspi_pins {
pinctrl-single,pins = <
- 0x7c (PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
- 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
- 0x90 (PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
- 0x94 (PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
- 0x98 (PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
- 0x9c (PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3) /* gpmc_csn0.qspi_csn */
+ AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */
+ AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */
+ AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */
+ AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3) /* gpmc_wen.qspi_d2 */
+ AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
- 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
lcd_pins: lcd_pins {
pinctrl-single,pins = <
- 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+ AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
>;
};
usb1_pins: usb1_pins {
pinctrl-single,pins = <
- 0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
>;
};
usb2_pins: usb2_pins {
pinctrl-single,pins = <
- 0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+ AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
>;
};
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 47954ed..746fd2b 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -144,228 +144,228 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */
+ AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
- 0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */
+ AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
+ AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
- 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
- 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
+ AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */
+ AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
- 0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
- 0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
- 0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */
+ AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,pins = <
- 0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
- 0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
- 0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
+ AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */
+ AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
+ AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
+ AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
qspi1_default: qspi1_default {
pinctrl-single,pins = <
- 0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+ AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+ AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
>;
};
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
- 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
+ AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */
>;
};
hdq_pins: pinmux_hdq_pins {
pinctrl-single,pins = <
- 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
+ AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
- 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
- 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
- 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
- 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
- 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
- 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
- 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
- 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
- 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
- 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+ AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+ AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+ AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+ AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+ AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+ AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+ AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+ AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+ AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
- 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
- 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
- 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
- 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
- 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
- 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
- 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
- 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
- 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
- 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
- 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
- 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
- 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
- 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
+ AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */
+ AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */
+ AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */
+ AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */
+ AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */
+ AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */
+ AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */
+ AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */
+ AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */
+ AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */
+ AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */
+ AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */
+ AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
- 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
- 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+ AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
- 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
- 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
- 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
- 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+ AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+ AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
- 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index d9ba6b8..36c0fa6 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -181,97 +181,97 @@
&dra7_pmx_core {
leds_pins_default: leds_pins_default {
pinctrl-single,pins = <
- 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
- 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
- 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
- 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
+ DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
+ DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
+ DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
+ DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
>;
};
i2c1_pins_default: i2c1_pins_default {
pinctrl-single,pins = <
- 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
- 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
- 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
i2c3_pins_default: i2c3_pins_default {
pinctrl-single,pins = <
- 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
- 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
>;
};
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
- 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
cpsw_pins_default: cpsw_pins_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
- 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
- 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
- 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
- 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
- 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
- 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
- 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
- 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
- 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
- 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
- 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
/* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
>;
};
@@ -279,115 +279,115 @@
cpsw_pins_sleep: cpsw_pins_sleep {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (PIN_INPUT | MUX_MODE15)
- 0x254 (PIN_INPUT | MUX_MODE15)
- 0x258 (PIN_INPUT | MUX_MODE15)
- 0x25c (PIN_INPUT | MUX_MODE15)
- 0x260 (PIN_INPUT | MUX_MODE15)
- 0x264 (PIN_INPUT | MUX_MODE15)
- 0x268 (PIN_INPUT | MUX_MODE15)
- 0x26c (PIN_INPUT | MUX_MODE15)
- 0x270 (PIN_INPUT | MUX_MODE15)
- 0x274 (PIN_INPUT | MUX_MODE15)
- 0x278 (PIN_INPUT | MUX_MODE15)
- 0x27c (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
/* Slave 2 */
- 0x198 (PIN_INPUT | MUX_MODE15)
- 0x19c (PIN_INPUT | MUX_MODE15)
- 0x1a0 (PIN_INPUT | MUX_MODE15)
- 0x1a4 (PIN_INPUT | MUX_MODE15)
- 0x1a8 (PIN_INPUT | MUX_MODE15)
- 0x1ac (PIN_INPUT | MUX_MODE15)
- 0x1b0 (PIN_INPUT | MUX_MODE15)
- 0x1b4 (PIN_INPUT | MUX_MODE15)
- 0x1b8 (PIN_INPUT | MUX_MODE15)
- 0x1bc (PIN_INPUT | MUX_MODE15)
- 0x1c0 (PIN_INPUT | MUX_MODE15)
- 0x1c4 (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
>;
};
davinci_mdio_pins_default: davinci_mdio_pins_default {
pinctrl-single,pins = <
/* MDIO */
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
+ DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
>;
};
davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
pinctrl-single,pins = <
- 0x23c (PIN_INPUT | MUX_MODE15)
- 0x240 (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
>;
};
tps659038_pins_default: tps659038_pins_default {
pinctrl-single,pins = <
- 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
>;
};
tmp102_pins_default: tmp102_pins_default {
pinctrl-single,pins = <
- 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
+ DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
>;
};
mcp79410_pins_default: mcp79410_pins_default {
pinctrl-single,pins = <
- 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
extcon_usb1_pins: extcon_usb1_pins {
pinctrl-single,pins = <
- 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
- 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
- 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
+ DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+ DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
>;
};
clkout2_pins_default: clkout2_pins_default {
pinctrl-single,pins = <
- 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
+ DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
>;
};
clkout2_pins_sleep: clkout2_pins_sleep {
pinctrl-single,pins = <
- 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
+ DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
>;
};
mcasp3_pins_default: mcasp3_pins_default {
pinctrl-single,pins = <
- 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
- 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
- 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
>;
};
mcasp3_pins_sleep: mcasp3_pins_sleep {
pinctrl-single,pins = <
- 0x324 (PIN_INPUT | MUX_MODE15)
- 0x328 (PIN_INPUT | MUX_MODE15)
- 0x32c (PIN_INPUT | MUX_MODE15)
- 0x330 (PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
>;
};
};
@@ -604,6 +604,7 @@
reg = <0x6f>;
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
<&dra7_pmx_core 0x424>;
+ interrupt-names = "irq", "wakeup";
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
new file mode 100644
index 0000000..c538826
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -0,0 +1,617 @@
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra74x.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x";
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led@0 {
+ label = "cl-som-am57x:green";
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ads7846reg: fixedregulator-ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Microphone", "Microphone Jack",
+ "Line", "Line Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "LLINEIN", "Line Jack",
+ "MICIN", "Mic Bias",
+ "Mic Bias", "Microphone Jack";
+
+ dailink0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8731>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ i2c3_pins_default: i2c3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ i2c4_pins_default: i2c4_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */
+ DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */
+ >;
+ };
+
+ tps659038_pins_default: tps659038_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ qspi1_pins: pinmux_qspi1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
+ >;
+ };
+
+ cpsw_pins_default: cpsw_pins_default {
+ pinctrl-single,pins = <
+ /* Slave at addr 0x0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+ /* Slave at addr 0x1 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+ };
+
+ cpsw_pins_sleep: cpsw_pins_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+ /* Slave 2 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_pins_default: davinci_mdio_pins_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */
+ >;
+ };
+
+ davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ ads7846_pins: pinmux_ads7846_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+ >;
+ };
+
+ mcasp3_pins_default: mcasp3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_pins_sleep: mcasp3_pins_sleep {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&i2c4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_GPU */
+ regulator-name = "smps6";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ /* VDD_CORE */
+ regulator-name = "smps7";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ /* VDD_IVA */
+ regulator-name = "smps8";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ /* PMIC_3V3 */
+ regulator-name = "smps9";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD / VDDSHV8 */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_1V8 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* regen1 not used */
+ };
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ rtc0: rtc@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+
+ eeprom_module: atmel@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ wm8731: wm8731@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+ status = "okay";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&sata {
+ status = "okay";
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi1_pins>;
+
+ spi-max-frequency = <20000000>;
+
+ spi_flash: spi_flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80", "jedec,spi-nor";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <20000000>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xc0000>;
+ };
+
+ partition@c0000 {
+ label = "uboot environment";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ label = "reserved";
+ reg = <0x100000 0x0>;
+ };
+ };
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <1>; /* CS1 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <31 0>;
+ pendown-gpio = <&gpio1 31 0>;
+
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ linux,wakeup;
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_pins_default>;
+ pinctrl-1 = <&cpsw_pins_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <0>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_pins_default>;
+ pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+};
+
+&usb2 {
+ dr_mode = "peripheral";
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins_default>;
+ pinctrl-1 = <&mcasp3_pins_sleep>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&gpio3 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
+
+&gpio2 {
+ status = "okay";
+ ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
new file mode 100644
index 0000000..77bb8e1
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -0,0 +1,179 @@
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ display0 = &lcd0;
+ display1 = &hdmi;
+ };
+};
+
+&dra7_pmx_core {
+ uart3_pins_default: uart3_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */
+ DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ i2c5_pins_default: i2c5_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ >;
+ };
+
+ lcd_pins_default: lcd_pins_default {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */
+ >;
+ };
+
+ hdmi_pins: pinmux_hdmi_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ >;
+ };
+
+ hdmi_conn_pins: pinmux_hdmi_conn_pins {
+ pinctrl-single,pins = <
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */
+ >;
+ };
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3f8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom_base: atmel@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&dss {
+ status = "ok";
+
+ vdda_video-supply = <&ldoln_reg>;
+
+ port {
+ dpi_lcd_out: endpoint@0 {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&lcd0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_default>;
+
+ enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+ &gpio4 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_lcd_out>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&ldo4_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ lanes = <1 0 3 2 5 4 7 6>;
+ };
+ };
+};
+
+&hdmi_conn {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_conn_pins>;
+
+ hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 4e0ad3b..0962f2f 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -155,21 +155,21 @@
label = "keyswitch_in";
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
error_in {
label = "error_in";
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
- gpio-key,wakeup;
+ wakeup-source;
};
btn {
label = "btn";
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 0000000..896bd21
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,668 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB11MPcore";
+ compatible = "arm,realview-pb11mp";
+
+ chosen { };
+
+ aliases {
+ serial0 = &pb11mp_serial0;
+ serial1 = &pb11mp_serial1;
+ serial2 = &pb11mp_serial2;
+ serial3 = &pb11mp_serial3;
+ };
+
+ memory {
+ /*
+ * The PB11MPCore has 512 MiB memory @ 0x70000000
+ * and the first 256 are also remapped @ 0x00000000
+ */
+ reg = <0x70000000 0x20000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ MP11_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ MP11_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,arm11mpcore";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ /* Primary TestChip GIC synthesized with the CPU */
+ intc_tc11mp: interrupt-controller@1f000100 {
+ compatible = "arm,tc11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1f001000 0x1000>,
+ <0x1f000100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x1f002000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ scu@1f000000 {
+ compatible = "arm,arm11mp-scu";
+ reg = <0x1f000000 0x100>;
+ };
+
+ timer@1f000600 {
+ compatible = "arm,arm11mp-twd-timer";
+ reg = <0x1f000600 0x20>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ watchdog@1f000620 {
+ compatible = "arm,arm11mp-twd-wdt";
+ reg = <0x1f000620 0x20>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ /* PMU with one IRQ line per core */
+ pmu {
+ compatible = "arm,arm11mpcore-pmu";
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ veth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "veth";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ wdogclk: wdogclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ flash0@40000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0x40000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ flash1@44000000 {
+ // 2 * 32MiB NOR Flash memory
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0x44000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb11mp-soc", "simple-bus";
+ regmap = <&pb11mp_syscon>;
+ ranges;
+
+ pb11mp_syscon: syscon@10000000 {
+ compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ linux,default-trigger = "cpu1";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ linux,default-trigger = "cpu2";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ linux,default-trigger = "cpu3";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0C>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk1: osc1@10 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x10>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk2: osc2@14 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x14>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk3: osc3@18 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x18>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk4: osc4@1c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x1c>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk5: osc5@d4 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0xd4>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk6: osc6@d8 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0xd8>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
+ sp810_syscon: sysctl@10001000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x10001000 0x1000>;
+ clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclk0",
+ "timerclk1",
+ "timerclk2",
+ "timerclk3";
+ assigned-clocks = <&sp810_syscon 0>,
+ <&sp810_syscon 1>,
+ <&sp810_syscon 2>,
+ <&sp810_syscon 3>;
+ assigned-clock-parents = <&timclk>,
+ <&timclk>,
+ <&timclk>,
+ <&timclk>;
+ };
+
+ i2c0: i2c@10002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10002000 0x1000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+ };
+
+ aaci: aaci@10004000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x10004000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ mci: mmcsd@10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ kmi0: kmi@10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi1: kmi@10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ pb11mp_serial0: serial@10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial1: serial@1000a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000a000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial2: serial@1000b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000b000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb11mp_serial3: serial@1000c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000c000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ ssp@1000d000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1000d000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ watchdog@1000f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x1000f000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ watchdog@10010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x10010000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ timer01: timer@10011000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10011000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&sp810_syscon 0>,
+ <&sp810_syscon 1>,
+ <&pclk>;
+ clock-names = "timerclk0",
+ "timerclk1",
+ "apb_pclk";
+ };
+
+ timer23: timer@10012000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10012000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&sp810_syscon 2>,
+ <&sp810_syscon 3>,
+ <&pclk>;
+ clock-names = "timerclk2",
+ "timerclk3",
+ "apb_pclk";
+ };
+
+ gpio0: gpio@10013000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10013000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ rtc: rtc@10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ timer45: timer@10018000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10018000 0x1000>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timer", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer67: timer@10019000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10019000 0x1000>;
+ clocks = <&timclk>, <&pclk>;
+ clock-names = "timer", "apb_pclk";
+ status = "disabled";
+ };
+
+
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-parent = <&intc_pb11mp>;
+ interrupt-names = "combined";
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&oscclk4>, <&pclk>;
+ clock-names = "clcdclk", "apb_pclk";
+ max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <63500127>;
+ hactive = <1024>;
+ hback-porch = <152>;
+ hfront-porch = <48>;
+ hsync-len = <104>;
+ vactive = <768>;
+ vback-porch = <23>;
+ vfront-porch = <3>;
+ vsync-len = <4>;
+ };
+ };
+ };
+
+ /*
+ * This GIC on the Platform Baseboard is cascaded off the
+ * TestChip GIC
+ */
+ intc_pb11mp: interrupt-controller@1e000000 {
+ compatible = "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1e001000 0x1000>,
+ <0x1e000000 0x100>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* SMSC 9118 ethernet with PHY and EEPROM */
+ ethernet@4e000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x4e000000 0x10000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&veth>;
+ vddvario-supply = <&veth>;
+ };
+
+ usb@4f000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <0x4f000000 0x20000>;
+ interrupt-parent = <&intc_tc11mp>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ port1-otg;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 5555875..39181b3 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -127,7 +127,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
g762: g762@3e {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 78b563c..faa4748 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -133,7 +133,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
g762: g762@3e {
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
new file mode 100644
index 0000000..c6e180e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -0,0 +1,456 @@
+/*
+ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+ model = "SolidRun Clearfog A1";
+ compatible = "solidrun,clearfog-a1", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
+
+ aliases {
+ /* So that mvebu u-boot can update the MAC addresses */
+ ethernet1 = ð0;
+ ethernet2 = ð1;
+ ethernet3 = ð2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ soc {
+ internal-regs {
+ ethernet@30000 {
+ phy-mode = "sgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ ethernet@34000 {
+ phy-mode = "sgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ i2c@11000 {
+ /* Is there anything on this? */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /*
+ * PCA9655 GPIO expander, up to 1MHz clock.
+ * 0-CON3 CLKREQ#
+ * 1-CON3 PERST#
+ * 2-CON2 PERST#
+ * 3-CON3 W_DISABLE
+ * 4-CON2 CLKREQ#
+ * 5-USB3 overcurrent
+ * 6-USB3 power
+ * 7-CON2 W_DISABLE
+ * 8-JP4 P1
+ * 9-JP4 P4
+ * 10-JP4 P5
+ * 11-m.2 DEVSLP
+ * 12-SFP_LOS
+ * 13-SFP_TX_FAULT
+ * 14-SFP_TX_DISABLE
+ * 15-SFP_MOD_DEF0
+ */
+ expander0: gpio-expander@20 {
+ /*
+ * This is how it should be:
+ * compatible = "onnn,pca9655",
+ * "nxp,pca9555";
+ * but you can't do this because of
+ * the way I2C works.
+ */
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+
+ pcie1_0_clkreq {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie1.0-clkreq";
+ };
+ pcie1_0_w_disable {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie1.0-w-disable";
+ };
+ pcie2_0_clkreq {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "pcie2.0-clkreq";
+ };
+ pcie2_0_w_disable {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "pcie2.0-w-disable";
+ };
+ usb3_ilimit {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "usb3-current-limit";
+ };
+ usb3_power {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb3-power";
+ };
+ m2_devslp {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "m.2 devslp";
+ };
+ sfp_los {
+ /* SFP loss of signal */
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sfp-los";
+ };
+ sfp_tx_fault {
+ /* SFP laser fault */
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "sfp-tx-fault";
+ };
+ sfp_tx_disable {
+ /* SFP transmit disable */
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "sfp-tx-disable";
+ };
+ sfp_mod_def0 {
+ /* SFP module present */
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_LOW>;
+ input;
+ line-name = "sfp-mod-def0";
+ };
+ };
+
+ /* The MCP3021 is 100kHz clock only */
+ mikrobus_adc: mcp3021@4c {
+ compatible = "microchip,mcp3021";
+ reg = <0x4c>;
+ };
+
+ /* Also something at 0x64 */
+ };
+
+ i2c@11100 {
+ /*
+ * Routed to SFP, mikrobus, and PCIe.
+ * SFP limits this to 100kHz, and requires
+ * an AT24C01A/02/04 with address pins tied
+ * low, which takes addresses 0x50 and 0x51.
+ * Mikrobus doesn't specify beyond an I2C
+ * bus being present.
+ * PCIe uses ARP to assign addresses, or
+ * 0x63-0x64.
+ */
+ clock-frequency = <100000>;
+ pinctrl-0 = <&clearfog_i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ mdio@72004 {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ phy_dedicated: ethernet-phy@0 {
+ /*
+ * Annoyingly, the marvell phy driver
+ * configures the LED register, rather
+ * than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x101e>;
+ reg = <0>;
+ };
+ };
+
+ pinctrl@18000 {
+ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+ marvell,pins = "mpp46";
+ marvell,function = "ref";
+ };
+ clearfog_dsa0_pins: clearfog-dsa0-pins {
+ marvell,pins = "mpp23", "mpp41";
+ marvell,function = "gpio";
+ };
+ clearfog_i2c1_pins: i2c1-pins {
+ /* SFP, PCIe, mSATA, mikrobus */
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "i2c1";
+ };
+ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+ marvell,pins = "mpp20";
+ marvell,function = "gpio";
+ };
+ clearfog_sdhci_pins: clearfog-sdhci-pins {
+ marvell,pins = "mpp21", "mpp28",
+ "mpp37", "mpp38",
+ "mpp39", "mpp40";
+ marvell,function = "sd0";
+ };
+ clearfog_spi1_cs_pins: spi1-cs-pins {
+ marvell,pins = "mpp55";
+ marvell,function = "spi1";
+ };
+ mikro_pins: mikro-pins {
+ /* int: mpp22 rst: mpp29 */
+ marvell,pins = "mpp22", "mpp29";
+ marvell,function = "gpio";
+ };
+ mikro_spi_pins: mikro-spi-pins {
+ marvell,pins = "mpp43";
+ marvell,function = "spi1";
+ };
+ mikro_uart_pins: mikro-uart-pins {
+ marvell,pins = "mpp24", "mpp25";
+ marvell,function = "ua1";
+ };
+ rear_button_pins: rear-button-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+ };
+
+ sata@a8000 {
+ /* pinctrl? */
+ status = "okay";
+ };
+
+ sata@e0000 {
+ /* pinctrl? */
+ status = "okay";
+ };
+
+ sdhci@d8000 {
+ bus-width = <4>;
+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ pinctrl-0 = <&clearfog_sdhci_pins
+ &clearfog_sdhci_cd_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ vmmc = <®_3p3v>;
+ wp-inverted;
+ };
+
+ serial@12100 {
+ /* mikrobus uart */
+ pinctrl-0 = <&mikro_uart_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ spi@10680 {
+ /*
+ * We don't seem to have the W25Q32 on the
+ * A1 Rev 2.0 boards, so disable SPI.
+ * CS0: W25Q32 (doesn't appear to be present)
+ * CS1:
+ * CS2: mikrobus
+ */
+ pinctrl-0 = <&spi1_pins
+ &clearfog_spi1_cs_pins
+ &mikro_spi_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "w25q32", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <3000000>;
+ status = "disabled";
+ };
+ };
+
+ usb@58000 {
+ /* CON3, nearest power. */
+ status = "okay";
+ };
+
+ usb3@f0000 {
+ /* CON2, nearest CPU, USB2 only. */
+ status = "okay";
+ };
+
+ usb3@f8000 {
+ /* CON7 */
+ status = "okay";
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+ /*
+ * The two PCIe units are accessible through
+ * the mini-PCIe connectors on the board.
+ */
+ pcie@2,0 {
+ /* Port 1, Lane 0. CON3, nearest power. */
+ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 2, Lane 0. CON2, nearest CPU. */
+ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ dsa,ethernet = <ð1>;
+ dsa,mii-bus = <&mdio>;
+ pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+ pinctrl-names = "default";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4 0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan5";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+
+ port@6 {
+ /* 88E1512 external phy */
+ reg = <6>;
+ label = "lan6";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&rear_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ /* The rear SW3 button */
+ label = "Rear Button";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index a633be3..cd31602 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -303,16 +303,6 @@
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
};
- reg_usb2_1_vbus: v5-vbus1 {
- compatible = "regulator-fixed";
- regulator-name = "v5.0-vbus1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
- };
-
reg_sata0: pwr-sata0 {
compatible = "regulator-fixed";
regulator-name = "pwr_en_sata0";
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 0000000..3f792a5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,115 @@
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board. Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* 256 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+
+ internal-regs {
+ ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy_dedicated>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+ };
+
+ mdio@72004 {
+ /*
+ * Add the phy clock here, so the phy can be
+ * accessed to read its IDs prior to binding
+ * with the driver.
+ */
+ pinctrl-0 = <&mdio_pins µsom_phy_clk_pins>;
+ pinctrl-names = "default";
+
+ phy_dedicated: ethernet-phy@0 {
+ /*
+ * Annoyingly, the marvell phy driver
+ * configures the LED register, rather
+ * than preserving reset-loaded setting.
+ * We undo that rubbish here.
+ */
+ marvell,reg-init = <3 16 0 0x101e>;
+ reg = <0>;
+ };
+ };
+
+ pinctrl@18000 {
+ microsom_phy_clk_pins: microsom-phy-clk-pins {
+ marvell,pins = "mpp45";
+ marvell,function = "ref";
+ };
+ };
+
+ rtc@a3800 {
+ /*
+ * If the rtc doesn't work, run "date reset"
+ * twice in u-boot.
+ */
+ status = "okay";
+ };
+
+ serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 58b5008..13cf69a8 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -151,42 +151,42 @@
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0xe0000>;
- read-only;
- };
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@e0000 {
- label = "u-boot-env";
- reg = <0xe0000 0x20000>;
- read-only;
- };
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000e0000>;
+ read-only;
+ };
- partition@100000 {
- label = "u-boot-env2";
- reg = <0x100000 0x20000>;
- read-only;
- };
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0x000e0000 0x00020000>;
+ read-only;
+ };
- partition@120000 {
- label = "zImage";
- reg = <0x120000 0x400000>;
- };
+ partition@100000 {
+ label = "u-boot-env2";
+ reg = <0x00100000 0x00020000>;
+ read-only;
+ };
- partition@520000 {
- label = "initrd";
- reg = <0x520000 0x400000>;
- };
+ partition@120000 {
+ label = "zImage";
+ reg = <0x00120000 0x00400000>;
+ };
- partition@xE00000 {
- label = "boot";
- reg = <0xE00000 0x3F200000>;
- };
+ partition@520000 {
+ label = "initrd";
+ reg = <0x00520000 0x00400000>;
+ };
- partition@flash {
- label = "flash";
- reg = <0x0 0x40000000>;
+ partition@e00000 {
+ label = "boot";
+ reg = <0x00e00000 0x3f200000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 6fe8972..62175a8 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -141,7 +141,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
- isil,irq2-can-wakeup-machine;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f89598a..6bf873e 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -159,7 +159,7 @@
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index bf18ece..229e989 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -24,15 +24,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
main_xtal {
clock-frequency = <18432000>;
};
@@ -94,14 +85,14 @@
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
index f0b1563..50a1456 100644
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -171,21 +171,21 @@
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
- gpio-key,wakeup;
+ wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 9f72b49..9682d10 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -98,14 +98,14 @@
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
- gpio-key,wakeup;
+ wakeup-source;
};
reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a9aef53..4f2eebf 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -183,7 +183,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e07c2b2..787a166 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -45,6 +45,7 @@
/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
/ {
model = "Atmel SAMA5D2 Xplained";
@@ -59,15 +60,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -91,6 +83,22 @@
status = "okay";
};
+ sdmmc0: sdio-host@a0000000 {
+ bus-width = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc0_default>;
+ non-removable;
+ mmc-ddr-1_8v;
+ status = "okay";
+ };
+
+ sdmmc1: sdio-host@b0000000 {
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
+ status = "okay"; /* conflict with qspi0 */
+ };
+
apb {
spi0: spi@f8000000 {
pinctrl-names = "default";
@@ -111,6 +119,16 @@
status = "okay";
};
+ pdmic@f8018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdmic_default>;
+ atmel,model = "PDMIC @ sama5d2_xplained";
+ atmel,mic-min-freq = <1000000>;
+ atmel,mic-max-freq = <3246000>;
+ atmel,mic-offset = <0x0>;
+ status = "okay";
+ };
+
uart1: serial@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
@@ -121,6 +139,7 @@
dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_default>;
+ i2c-sda-hold-time-ns = <350>;
status = "okay";
pmic: act8865@5b {
@@ -181,12 +200,53 @@
};
};
+ flx0: flexcom@f8034000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+ uart5: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&flx0_clk>;
+ clock-names = "usart";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ atmel,fifo-size = <32>;
+ status = "okay";
+ };
+ };
+
+ watchdog@f8048040 {
+ status = "okay";
+ };
+
uart3: serial@fc008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
};
+ flx4: flexcom@fc018000 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c2: i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <0>, <0>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx4_clk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx4_default>;
+ atmel,fifo-size = <16>;
+ status = "okay";
+ };
+ };
+
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
pinctrl-names = "default";
@@ -201,6 +261,18 @@
};
pinctrl@fc038000 {
+ pinctrl_flx0_default: flx0_default {
+ pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+ <PIN_PB29__FLEXCOM0_IO1>;
+ bias-disable;
+ };
+
+ pinctrl_flx4_default: flx4_default {
+ pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+ <PIN_PD13__FLEXCOM4_IO1>;
+ bias-disable;
+ };
+
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
@@ -227,6 +299,52 @@
bias-disable;
};
+ pinctrl_pdmic_default: pdmic_default {
+ pinmux = <PIN_PB26__PDMIC_DAT>,
+ <PIN_PB27__PDMIC_CLK>;
+ bias-disable;
+ };
+
+ pinctrl_sdmmc0_default: sdmmc0_default {
+ cmd_data {
+ pinmux = <PIN_PA1__SDMMC0_CMD>,
+ <PIN_PA2__SDMMC0_DAT0>,
+ <PIN_PA3__SDMMC0_DAT1>,
+ <PIN_PA4__SDMMC0_DAT2>,
+ <PIN_PA5__SDMMC0_DAT3>,
+ <PIN_PA6__SDMMC0_DAT4>,
+ <PIN_PA7__SDMMC0_DAT5>,
+ <PIN_PA8__SDMMC0_DAT6>,
+ <PIN_PA9__SDMMC0_DAT7>;
+ bias-pull-up;
+ };
+
+ ck_cd_rstn_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA10__SDMMC0_RSTN>,
+ <PIN_PA11__SDMMC0_VDDSEL>,
+ <PIN_PA13__SDMMC0_CD>;
+ bias-disable;
+ };
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ conf-ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+
pinctrl_spi0_default: spi0_default {
pinmux = <PIN_PA14__SPI0_SPCK>,
<PIN_PA15__SPI0_MOSI>,
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 8488ac5..ff888d2 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -315,7 +315,7 @@
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 0000000..e7b2109
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+ model = "DENX MA5D4";
+ compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ main_clock: main_clock {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ clk20m: clk20m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ clock-output-names = "clk20m";
+ };
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+ vmmc-supply = <&vcc_mmc0_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ broken-cd;
+ };
+ };
+
+ spi0: spi@f8010000 {
+ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ i2c0: i2c@f8014000 {
+ status = "okay";
+ };
+
+ spi1: spi@fc018000 {
+ cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+ status = "okay";
+
+ can0: can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&pioE>;
+ interrupts = <6 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+
+ can1: can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&pioE>;
+ interrupts = <7 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ adc0: adc@fc034000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* external trigger conflicts with USBA_VBUS */
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ >;
+ atmel,adc-vref = <3300>;
+ status = "okay";
+ };
+
+ watchdog@fc068640 {
+ status = "okay";
+ };
+ };
+ };
+
+ vcc_3v3_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC 3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_mmc0_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+ regulator-name = "RST_n MCI0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_reg>;
+ regulator-boot-on;
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 0000000..abaaba5
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+ model = "DENX MA5D4EVK";
+ compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ ahb {
+ usb0: gadget@00400000 {
+ atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00500000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 11 GPIO_ACTIVE_LOW
+ &pioE 14 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00600000 {
+ status = "okay";
+ };
+
+ apb {
+ hlcdc: hlcdc@f0000000 {
+ status = "okay";
+
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ };
+
+ macb0: ethernet@f8020000 {
+ phy-mode = "rmii";
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ usart0: serial@f802c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f8030000 {
+ status = "okay";
+ };
+
+ mmc1: mmc@fc000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 5 0>;
+ };
+ };
+
+ adc0: adc@fc034000 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ };
+
+
+ pinctrl@fc06a000 {
+ board {
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&hlcdc_pwm 0 50000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ user1 {
+ label = "user1";
+ gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user2 {
+ label = "user2";
+ gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user3 {
+ label = "user3";
+ gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ panel: panel {
+ /* Actually Ampire 800480R2 */
+ compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+ backlight = <&backlight>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hlcdc_panel_output>;
+ };
+ };
+ };
+
+ vcc_mmc1_reg: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+ regulator-name = "VDD MCI1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3_reg>;
+ };
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 45371a1..131614f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -50,7 +50,6 @@
compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
chosen {
- bootargs = "ignore_loglevel earlyprintk";
stdout-path = "serial0:115200n8";
};
@@ -59,15 +58,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -235,7 +225,7 @@
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 6d272c0..2d4a3310 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -50,7 +50,6 @@
compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
chosen {
- bootargs = "ignore_loglevel earlyprintk";
stdout-path = "serial0:115200n8";
};
@@ -59,15 +58,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -304,7 +294,7 @@
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
new file mode 100644
index 0000000..79aec55
--- /dev/null
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -0,0 +1,256 @@
+/*
+ * Device Tree file for VInCo platform
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ * 2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+ model = "L+G VInCo platform";
+ compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+
+ adc0: adc@fc034000 {
+ status = "okay"; /* Enable ADC IIO support */
+ };
+
+ mmc0: mmc@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+ &pinctrl_mmc0_dat1_3
+ &pinctrl_mmc0_dat4_7>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ vmmc-supply = <&vcc_3v3_reg>;
+ no-1-8-v;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ non-removable;
+ broken-cd;
+ status = "okay";
+ };
+ };
+
+ spi0: spi@f8010000 {
+ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+ status = "okay";
+ m25p80@0 {
+ compatible = "n25q32b", "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
+
+ i2c0: i2c@f8014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f8018000 {
+ status = "okay";
+ /* kerkey security module */
+ };
+
+ macb0: ethernet@f8020000 {
+ phy-mode = "rmii";
+ status = "okay";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&pioB>;
+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+ };
+
+ i2c2: i2c@f8024000 {
+ status = "okay";
+
+ rtc1: rtc@64 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+ };
+
+ usart2: serial@fc008000 {
+ /* MBUS */
+ status = "okay";
+ };
+
+ usart3: serial@fc00c000 {
+ /* debug */
+ status = "okay";
+ };
+
+ usart4: serial@fc010000 {
+ /* LMN */
+ pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ macb1: ethernet@fc028000 {
+ phy-mode = "rmii";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioB>;
+ interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ watchdog@fc068640 {
+ status = "okay";
+ };
+
+ pinctrl@fc06a000 {
+ board {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+ };
+ };
+
+ usb0: gadget@00400000 {
+ atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "disable";
+ };
+
+ usb1: ohci@00500000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 11 GPIO_ACTIVE_LOW
+ &pioE 12 GPIO_ACTIVE_LOW
+ >;
+ status = "disable";
+ };
+
+ usb2: ehci@00600000 {
+ /* 4G Modem */
+ status = "okay";
+ };
+
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led_err {
+ label = "err";
+ gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_rssi {
+ label = "rssi";
+ gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_tls {
+ label = "tls";
+ gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_lmc {
+ label = "lmc";
+ gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_wmt {
+ label = "wmt";
+ gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led_pwr {
+ label = "pwr";
+ gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ };
+
+ vcc_3v3_reg: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC 3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8dab4b7..f90e1c2 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -21,15 +21,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2e92ac0..55bd51f 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -22,15 +22,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -149,7 +140,7 @@
ti,debounce-tol = /bits/ 16 <65535>;
ti,debounce-max = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
@@ -193,28 +184,28 @@
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
- gpio-key,wakeup;
+ wakeup-source;
};
button_3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 2338127..59df9d7 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -22,15 +22,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <16367660>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -213,14 +204,14 @@
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 57548a2..e9cc99b 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -19,15 +19,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -206,14 +197,14 @@
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
- gpio-key,wakeup;
+ wakeup-source;
};
btn4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 9d16ef8..2400c99 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -24,15 +24,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -323,14 +314,14 @@
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
right_click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
left {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index acf3451..ca4ddf8 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -23,15 +23,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <16000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -219,7 +210,7 @@
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 558c9f2..f10566f 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -22,15 +22,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
@@ -225,14 +216,14 @@
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
- gpio-key,wakeup;
+ wakeup-source;
};
left_click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 26112eb..b098ad8 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -13,17 +13,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
- };
-
- clocks {
slow_xtal {
clock-frequency = <32768>;
};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2778533..3878793 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -91,6 +91,23 @@
#address-cells = <1>;
#size-cells = <1>;
+ pcie_phy: phy@0301d0a0 {
+ compatible = "brcm,cygnus-pcie-phy";
+ reg = <0x0301d0a0 0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie0_phy: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ pcie1_phy: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
pinctrl: pinctrl@0x0301d0c8 {
compatible = "brcm,cygnus-pinmux";
reg = <0x0301d0c8 0x30>,
@@ -101,6 +118,7 @@
compatible = "brcm,cygnus-crmu-gpio";
reg = <0x03024800 0x50>,
<0x03024008 0x18>;
+ ngpios = <6>;
#gpio-cells = <2>;
gpio-controller;
};
@@ -127,6 +145,7 @@
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
+ ngpios = <24>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -161,7 +180,21 @@
ranges = <0x81000000 0 0 0x28000000 0 0x00010000
0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+ phys = <&pcie0_phy>;
+ phy-names = "pcie-phy";
+
status = "disabled";
+
+ msi-parent = <&msi0>;
+ msi0: msi@18012000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+ <GIC_SPI 97 IRQ_TYPE_NONE>,
+ <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ };
};
pcie1: pcie@18013000 {
@@ -182,7 +215,21 @@
ranges = <0x81000000 0 0 0x48000000 0 0x00010000
0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy";
+
status = "disabled";
+
+ msi-parent = <&msi1>;
+ msi1: msi@18013000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
+ <GIC_SPI 103 IRQ_TYPE_NONE>,
+ <GIC_SPI 104 IRQ_TYPE_NONE>,
+ <GIC_SPI 105 IRQ_TYPE_NONE>;
+ };
};
uart0: serial@18020000 {
@@ -245,13 +292,63 @@
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
+ ngpios = <146>;
#gpio-cells = <2>;
gpio-controller;
- pinmux = <&pinctrl>;
-
interrupt-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 42 1>,
+ <&pinctrl 1 44 3>,
+ <&pinctrl 4 48 1>,
+ <&pinctrl 5 50 3>,
+ <&pinctrl 8 126 1>,
+ <&pinctrl 9 155 1>,
+ <&pinctrl 10 152 1>,
+ <&pinctrl 11 154 1>,
+ <&pinctrl 12 153 1>,
+ <&pinctrl 13 127 3>,
+ <&pinctrl 16 140 1>,
+ <&pinctrl 17 145 7>,
+ <&pinctrl 24 130 10>,
+ <&pinctrl 34 141 4>,
+ <&pinctrl 38 54 1>,
+ <&pinctrl 39 56 3>,
+ <&pinctrl 42 60 3>,
+ <&pinctrl 45 64 3>,
+ <&pinctrl 48 68 2>,
+ <&pinctrl 50 84 6>,
+ <&pinctrl 56 94 6>,
+ <&pinctrl 62 72 1>,
+ <&pinctrl 63 70 1>,
+ <&pinctrl 64 80 1>,
+ <&pinctrl 65 74 3>,
+ <&pinctrl 68 78 1>,
+ <&pinctrl 69 82 1>,
+ <&pinctrl 70 156 17>,
+ <&pinctrl 87 104 12>,
+ <&pinctrl 99 102 2>,
+ <&pinctrl 101 90 4>,
+ <&pinctrl 105 116 6>,
+ <&pinctrl 111 100 2>,
+ <&pinctrl 113 122 4>,
+ <&pinctrl 123 11 1>,
+ <&pinctrl 124 38 4>,
+ <&pinctrl 128 43 1>,
+ <&pinctrl 129 47 1>,
+ <&pinctrl 130 49 1>,
+ <&pinctrl 131 53 1>,
+ <&pinctrl 132 55 1>,
+ <&pinctrl 133 59 1>,
+ <&pinctrl 134 63 1>,
+ <&pinctrl 135 67 1>,
+ <&pinctrl 136 71 1>,
+ <&pinctrl 137 73 1>,
+ <&pinctrl 138 77 1>,
+ <&pinctrl 139 79 1>,
+ <&pinctrl 140 81 1>,
+ <&pinctrl 141 83 1>,
+ <&pinctrl 142 10 1>;
};
touchscreen: tsc@180a6000 {
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 58aca27..10bdef5 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -32,6 +32,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
#include "skeleton.dtsi"
@@ -40,9 +41,30 @@
model = "Broadcom Northstar Plus SoC";
interrupt-parent = <&gic>;
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff042c>;
+ reg = <0x1>;
+ };
+ };
+
mpcore {
compatible = "simple-bus";
- ranges = <0x00000000 0x19020000 0x00003000>;
+ ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
@@ -58,27 +80,50 @@
};
};
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
- cache-unified;
- cache-level = <2>;
+ a9pll: arm_clk@00000 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
};
- gic: interrupt-controller@19021000 {
+ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-timer@20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ twd-watchdog@20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&periph_clk>;
+ };
+
+ gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
};
- timer@19020200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x0200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
};
};
@@ -87,33 +132,178 @@
#size-cells = <1>;
ranges;
- periph_clk: periph_clk {
- compatible = "fixed-clock";
+ osc: oscillator {
#clock-cells = <0>;
- clock-frequency = <500000000>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
axi {
compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
+ ranges = <0x00000000 0x18000000 0x0011ba08>;
#address-cells = <1>;
#size-cells = <1>;
- uart0: serial@18000300 {
+ uart0: serial@0300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62499840>;
+ clocks = <&osc>;
status = "disabled";
};
- uart1: serial@18000400 {
+ uart1: serial@0400 {
compatible = "ns16550a";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <62499840>;
+ clocks = <&osc>;
status = "disabled";
};
+
+ pcie0: pcie@12000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x12000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@13000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x13000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+ status = "disabled";
+ };
+
+ pcie2: pcie@14000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x14000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+
+ /* Note: The HW does not support I/O resources. So,
+ * only the memory resource range is being specified.
+ */
+ ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+ status = "disabled";
+ };
+
+ nand: nand@26000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x026000 0x600>,
+ <0x11b408 0x600>,
+ <0x026f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcm,nand-has-wp;
+ };
+
+ i2c0: i2c@38000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x38000 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ };
+
+ lcpll0: lcpll0@3f100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x3f100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
+ "ddr_phy";
+ };
+
+ genpll: genpll@3f140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x3f140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk",
+ "usbclk", "iprocfast", "sata1",
+ "sata2";
+ };
+
+ pinctrl: pinctrl@3f1c0 {
+ compatible = "brcm,nsp-pinmux";
+ reg = <0x3f1c0 0x04>,
+ <0x30028 0x04>,
+ <0x3f408 0x04>;
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 446c586..b52927c 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -50,6 +50,36 @@
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
+
+ wireless {
+ label = "bcm53xx:white:wireless";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz-2 {
+ label = "bcm53xx:white:5ghz-2";
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
};
gpio-keys {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 6f50f67..65a1309 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,6 +8,7 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <dt-bindings/clock/bcm-nsp.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -27,7 +28,7 @@
compatible = "ns16550";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000000>;
+ clocks = <&iprocslow>;
status = "disabled";
};
@@ -35,48 +36,55 @@
compatible = "ns16550";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000000>;
+ clocks = <&iprocslow>;
status = "disabled";
};
};
mpcore {
compatible = "simple-bus";
- ranges = <0x00000000 0x19020000 0x00003000>;
+ ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
- scu@0000 {
+ a9pll: arm_clk@00000 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
+ };
+
+ scu@20000 {
compatible = "arm,cortex-a9-scu";
- reg = <0x0000 0x100>;
+ reg = <0x20000 0x100>;
};
- timer@0200 {
+ timer@20200 {
compatible = "arm,cortex-a9-global-timer";
- reg = <0x0200 0x100>;
+ reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_periph>;
+ clocks = <&periph_clk>;
};
- local-timer@0600 {
+ local-timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
- reg = <0x0600 0x100>;
+ reg = <0x20600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_periph>;
+ clocks = <&periph_clk>;
};
- gic: interrupt-controller@1000 {
+ gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
};
- L2: cache-controller@2000 {
+ L2: cache-controller@22000 {
compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
+ reg = <0x22000 0x1000>;
cache-unified;
arm,shared-override;
prefetch-data = <1>;
@@ -94,14 +102,37 @@
clocks {
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges;
- /* As long as we do not have a real clock driver us this
- * fixed clock */
- clk_periph: periph {
- compatible = "fixed-clock";
+ osc: oscillator {
#clock-cells = <0>;
- clock-frequency = <400000000>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
@@ -178,6 +209,25 @@
};
};
+ lcpll0: lcpll0@1800c100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x1800c100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
+ "ddr_phy";
+ };
+
+ genpll: genpll@1800c140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x1800c140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk",
+ "usbclk", "iprocfast", "sata1",
+ "sata2";
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 34cd640..d0560e8 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -43,18 +43,31 @@
#address-cells = <1>;
#size-cells = <0>;
- arm_timer_clk: arm_timer_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <500000000>;
- };
-
+ /* UBUS peripheral clock */
periph_clk: periph_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
clock-output-names = "periph";
};
+
+ /* peripheral clock for system timer */
+ axi_clk: axi_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /* APB bus clock */
+ apb_clk: apb_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
};
/* ARM bus */
@@ -93,14 +106,14 @@
compatible = "arm,cortex-a9-global-timer";
reg = <0x1e200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&arm_timer_clk>;
+ clocks = <&axi_clk>;
};
local_timer: local-timer@1e600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1e600 0x20>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&arm_timer_clk>;
+ clocks = <&axi_clk>;
};
twd_watchdog: watchdog@1e620 {
@@ -109,6 +122,13 @@
interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
};
+ armpll: armpll {
+ #clock-cells = <0>;
+ compatible = "brcm,bcm63138-armpll";
+ clocks = <&periph_clk>;
+ reg = <0x20000 0xf00>;
+ };
+
pmb0: reset-controller@4800c0 {
compatible = "brcm,bcm63138-pmb";
reg = <0x4800c0 0x10>;
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
new file mode 100644
index 0000000..251a486
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,56 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM94708)";
+ compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
new file mode 100644
index 0000000..b16cac9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,56 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM94709)";
+ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
new file mode 100644
index 0000000..05a985a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,63 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM953012K)";
+ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>;
+ };
+};
+
+&uart0 {
+ clock-frequency = <62499840>;
+ status = "okay";
+};
+
+&uart1 {
+ clock-frequency = <62499840>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 16303db..e298450 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -55,3 +55,62 @@
&uart1 {
status = "okay";
};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@1 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@2 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@3 {
+ label = "nrootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4 {
+ label = "ncustfs";
+ reg = <0x04000000 0x3c000000>;
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index eaadac3..ae81009 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -435,6 +435,29 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ wdt0: watchdog@1000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x1000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <0>;
+ };
+
+ wdt1: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@3000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x3000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index b16df15..6d06b61 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -396,6 +396,29 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ wdt0: watchdog@1000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x1000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <0>;
+ };
+
+ wdt1: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@3000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x3000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index da28c97..33b2875 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -84,17 +84,49 @@
gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ reg_sdio1_vmmc: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "sdio1_vmmc";
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_sdio1_vqmmc: regulator@4 {
+ compatible = "regulator-gpio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "sdio1_vqmmc";
+ regulator-type = "voltage";
+ enable-active-high;
+ gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+ states = <3300000 0x1
+ 1800000 0x0>;
+ };
+ };
+};
+
+&soc_pinctrl {
+ sd1gpio_pmux: sd1pwr-pmux {
+ groups = "G23", "G32";
+ function = "gpio";
};
};
&sdhci1 {
- broken-cd;
- sdhci,wp-inverted;
+ vmmc-supply = <®_sdio1_vmmc>;
+ vqmmc-supply = <®_sdio1_vqmmc>;
+ cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+ pinctrl-names = "default";
status = "okay";
};
&sdhci2 {
- broken-cd;
bus-width = <8>;
non-removable;
status = "okay";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 8ea177f..5f0abf6 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -309,7 +309,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1400 0x100>;
- interrupt-parent = <&aic>;
interrupts = <4>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
@@ -322,7 +321,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1800 0x100>;
- interrupt-parent = <&aic>;
interrupts = <5>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
@@ -417,6 +415,11 @@
soc_pinctrl: pin-controller {
compatible = "marvell,berlin2q-soc-pinctrl";
+ sd1_pmux: sd1-pmux {
+ groups = "G31";
+ function = "sd1";
+ };
+
twsi0_pmux: twsi0-pmux {
groups = "G6";
function = "twsi0";
@@ -508,6 +511,29 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ wdt0: watchdog@1000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x1000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <0>;
+ };
+
+ wdt1: watchdog@2000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x2000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@3000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x3000 0x100>;
+ clocks = <&refclk>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
@@ -528,7 +554,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <6>;
clocks = <&refclk>;
pinctrl-0 = <&twsi2_pmux>;
@@ -541,7 +566,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x8000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <7>;
clocks = <&refclk>;
pinctrl-0 = <&twsi3_pmux>;
@@ -552,7 +576,6 @@
uart0: uart@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <8>;
clocks = <&refclk>;
reg-shift = <2>;
@@ -564,7 +587,6 @@
uart1: uart@a000 {
compatible = "snps,dw-apb-uart";
reg = <0xa000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <9>;
clocks = <&refclk>;
reg-shift = <2>;
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
new file mode 100644
index 0000000..93d7e23
--- /dev/null
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ model = "CompuLab SB-SOM";
+ compatible = "compulab,sb-som";
+
+ vsb_3v3: fixedregulator-v3_3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsb_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ enable-active-high;
+ };
+
+ lcd0: display {
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "lcd";
+
+ panel-timing {
+ clock-frequency = <33000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <43>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ hdmi_conn: connector@0 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+ };
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c99cfa..b6543a8 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -64,7 +64,6 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- ti,hwmods = "l3_main";
prcm: prcm@48180000 {
compatible = "ti,dm816-prcm";
@@ -180,6 +179,8 @@
#address-cells = <2>;
#size-cells = <1>;
interrupts = <100>;
+ dmas = <&edma 52>;
+ dma-names = "rxtx";
gpmc,num-cs = <6>;
gpmc,num-waitpins = <2>;
};
@@ -226,6 +227,13 @@
};
};
+ spinbox: spinbox@480ca000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x480ca000 0x2000>;
+ ti,hwmods = "spinbox";
+ #hwlock-cells = <1>;
+ };
+
mdio: mdio@4a100800 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
@@ -319,6 +327,7 @@
reg = <0x48044000 0x2000>;
interrupts = <92>;
ti,hwmods = "timer4";
+ ti,timer-pwm;
};
timer5: timer@48046000 {
@@ -326,6 +335,7 @@
reg = <0x48046000 0x2000>;
interrupts = <93>;
ti,hwmods = "timer5";
+ ti,timer-pwm;
};
timer6: timer@48048000 {
@@ -333,6 +343,7 @@
reg = <0x48048000 0x2000>;
interrupts = <94>;
ti,hwmods = "timer6";
+ ti,timer-pwm;
};
timer7: timer@4804a000 {
@@ -340,6 +351,7 @@
reg = <0x4804a000 0x2000>;
interrupts = <95>;
ti,hwmods = "timer7";
+ ti,timer-pwm;
};
uart1: uart@48020000 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index e6fa251..af3cb63 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -62,6 +62,10 @@
pinctrl-0 = <&pmx_gpio_19>;
pinctrl-names = "default";
};
+
+ gpu-subsystem {
+ status = "okay";
+ };
};
&uart0 { status = "okay"; };
@@ -74,6 +78,10 @@
reg = <1>;
};
+&gpu {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index cd58c2e..698d58c 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -33,6 +33,12 @@
marvell,tauros2-cache-features = <0>;
};
+ gpu-subsystem {
+ compatible = "marvell,dove-gpu-subsystem";
+ cores = <&gpu>;
+ status = "disabled";
+ };
+
i2c-mux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
@@ -460,6 +466,12 @@
#clock-cells = <1>;
};
+ divider_clk: core-clock@0064 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+ };
+
pinctrl: pin-ctrl@0200 {
compatible = "marvell,dove-pinctrl";
reg = <0x0200 0x14>,
@@ -776,6 +788,16 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ gpu: gpu@840000 {
+ clocks = <÷r_clk 1>;
+ clock-names = "core";
+ compatible = "vivante,gc";
+ interrupts = <48>;
+ power-domains = <&gpu_domain>;
+ reg = <0x840000 0x4000>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 864f600..cfc24e5 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -154,100 +154,100 @@
vtt_pin: pinmux_vtt_pin {
pinctrl-single,pins = <
- 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+ DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
- 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
- 0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
- 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
+ DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+ DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
- 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
- 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
- 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
- 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
- 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
+ DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+ DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+ DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+ DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+ DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
>;
};
mcspi2_pins: pinmux_mcspi2_pins {
pinctrl-single,pins = <
- 0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
- 0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- 0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
- 0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+ DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+ DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+ DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+ DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
- 0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
- 0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
- 0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+ DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+ DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+ DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+ DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
- 0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
- 0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
- 0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+ DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+ DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
+ DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+ DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+ DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+ DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
- 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
- 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
- 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
- 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
- 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
- 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
- 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
- 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
- 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
+ DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
+ DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
+ DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
+ DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
- 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
@@ -257,60 +257,60 @@
* SW5.9 (GPMC_WPN) = LOW
* SW5.1 (NAND_BOOTn) = HIGH */
pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
+ DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
+ DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
+ DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
+ DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
+ DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
+ DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
+ DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
+ DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
+ DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
+ DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
+ DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
+ DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
+ DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
+ DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
+ DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
+ DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
+ DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
+ DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+ DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
+ DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+ DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+ DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
- 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
- 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
- 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
- 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
- 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
- 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
- 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
- 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
- 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
- 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
- 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
+ DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
+ DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
+ DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
+ DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
+ DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
+ DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
+ DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
+ DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
+ DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
+ DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
+ DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
+ DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
/* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
@@ -318,85 +318,85 @@
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 */
- 0x250 (MUX_MODE15)
- 0x254 (MUX_MODE15)
- 0x258 (MUX_MODE15)
- 0x25c (MUX_MODE15)
- 0x260 (MUX_MODE15)
- 0x264 (MUX_MODE15)
- 0x268 (MUX_MODE15)
- 0x26c (MUX_MODE15)
- 0x270 (MUX_MODE15)
- 0x274 (MUX_MODE15)
- 0x278 (MUX_MODE15)
- 0x27c (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
/* Slave 2 */
- 0x198 (MUX_MODE15)
- 0x19c (MUX_MODE15)
- 0x1a0 (MUX_MODE15)
- 0x1a4 (MUX_MODE15)
- 0x1a8 (MUX_MODE15)
- 0x1ac (MUX_MODE15)
- 0x1b0 (MUX_MODE15)
- 0x1b4 (MUX_MODE15)
- 0x1b8 (MUX_MODE15)
- 0x1bc (MUX_MODE15)
- 0x1c0 (MUX_MODE15)
- 0x1c4 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
- 0x23c (MUX_MODE15)
- 0x240 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
- 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
- 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
- 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
- 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
- 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
- 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
- 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
- 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
- 0x324 (MUX_MODE15)
- 0x328 (MUX_MODE15)
- 0x32c (MUX_MODE15)
- 0x330 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
>;
};
};
@@ -504,6 +504,7 @@
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
+ regulator-allow-bypass;
};
ldoln_reg: ldoln {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index bc672fb..c4d9175 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -41,6 +41,7 @@
ethernet1 = &cpsw_emac1;
d_can0 = &dcan1;
d_can1 = &dcan2;
+ spi0 = &qspi;
};
timer {
@@ -1153,8 +1154,10 @@
qspi: qspi@4b300000 {
compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>;
- reg-names = "qspi_base";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
@@ -1459,8 +1462,8 @@
interrupt-names = "tx", "rx";
dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
dma-names = "tx", "rx";
- clocks = <&mcasp3_ahclkx_mux>;
- clock-names = "fck";
+ clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+ clock-names = "fck", "ahclkx";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index d6104d5..00b1200 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -142,158 +142,158 @@
&dra7_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
- 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
- 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
- 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
nand_default: nand_default {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
- 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
- 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
- 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
- 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
- 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
- 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
- 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
- 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
- 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
- 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
- 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
- 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
- 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
- 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
- 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
- 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
- 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
- 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
- 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
- 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
+ DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
+ DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
+ DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
+ DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
+ DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
+ DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
+ DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
+ DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
+ DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
+ DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
+ DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
+ DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
+ DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
+ DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
+ DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
+ DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
+ DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+ DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+ DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+ DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+ DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+ DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
- 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
- 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+ DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
tps65917_pins_default: tps65917_pins_default {
pinctrl-single,pins = <
- 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
- 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
- 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
- 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
- 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+ DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+ DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
- 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
- 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
+ DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
+ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
- 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
- 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
- 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
- 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
- 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
- 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
+ DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
+ DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
+ DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
+ DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+ DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
+ DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
+ DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
- 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
- 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+ DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
- 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
- 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
- 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
- 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
- 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
- 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15)
- 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15)
- 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15)
- 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
>;
};
};
@@ -373,6 +373,7 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
+ regulator-allow-bypass;
};
ldo2_reg: ldo2 {
@@ -380,6 +381,7 @@
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-allow-bypass;
};
ldo3_reg: ldo3 {
@@ -478,6 +480,8 @@
&uart1 {
status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
};
&elm {
@@ -627,18 +631,18 @@
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 2 */
- 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
- 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
- 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
- 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
- 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
- 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
- 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
- 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
- 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
- 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
- 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
- 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
@@ -646,33 +650,33 @@
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 2 */
- 0x198 (MUX_MODE15)
- 0x19c (MUX_MODE15)
- 0x1a0 (MUX_MODE15)
- 0x1a4 (MUX_MODE15)
- 0x1a8 (MUX_MODE15)
- 0x1ac (MUX_MODE15)
- 0x1b0 (MUX_MODE15)
- 0x1b4 (MUX_MODE15)
- 0x1b8 (MUX_MODE15)
- 0x1bc (MUX_MODE15)
- 0x1c0 (MUX_MODE15)
- 0x1c4 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
- 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
- 0x23c (MUX_MODE15)
- 0x240 (MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+ DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
index a4ba31b..a4a281f 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
/ {
model = "Embedded Artists LPC3250 board based on NXP LPC3250";
@@ -22,7 +22,7 @@
memory {
device_type = "memory";
- reg = <0 0x4000000>;
+ reg = <0x80000000 0x4000000>;
};
ahb {
@@ -31,19 +31,6 @@
use-iram;
};
- /* Here, choose exactly one from: ohci, usbd */
- ohci@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-
-/*
- usbd@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-*/
-
/* 128MB Flash via SLC NAND controller */
slc: flash@20020000 {
status = "okay";
@@ -130,15 +117,6 @@
clock-frequency = <100000>;
};
- i2cusb: i2c@31020300 {
- clock-frequency = <100000>;
-
- isp1301: usb-transceiver@2d {
- compatible = "nxp,isp1301";
- reg = <0x2d>;
- };
- };
-
sd@20098000 {
wp-gpios = <&pca9532 5 0>;
cd-gpios = <&pca9532 4 0>;
@@ -279,3 +257,18 @@
};
};
};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 2f30d63..18e3def 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -152,6 +152,20 @@
interrupt-parent = <&gic>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* Reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
mipi_phy: video-phy@10020710 {
compatible = "samsung,s5pv210-mipi-video-phy";
#phy-cells = <1>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3184e10..07e10ee 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -158,6 +158,20 @@
interrupt-parent = <&gic>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 110dbd4..e2439e8 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -88,6 +88,20 @@
status = "disabled";
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
fimd: fimd@14400000 {
compatible = "samsung,exynos5250-fimd";
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd..fad0779 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -102,6 +102,20 @@
reg = <0x10040000 0x5000>;
};
+ poweroff: syscon-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&pmu_system_controller>;
+ offset = <0x330C>; /* PS_HOLD_CONTROL */
+ mask = <0x5200>; /* reset value */
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x0400>; /* SWRESET */
+ mask = <0x1>;
+ };
+
mct: mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0xB00>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 7c4b9f2..848ffa78 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -284,6 +284,7 @@
#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000
#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000
#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x16 0x000
#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000
#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000
@@ -439,6 +440,7 @@
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__UART1_DTR 0x1a8 0x3a0 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000
@@ -446,6 +448,7 @@
#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000
#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD 0x1b0 0x3a8 0x000 0x14 0x000
#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 677f81d..cde329e 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -24,6 +24,10 @@
i2c2 = &i2c3;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
+ pwm0 = &pwm1;
+ pwm1 = &pwm2;
+ pwm2 = &pwm3;
+ pwm3 = &pwm4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index feb9d34..f818ea4 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -486,7 +486,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@@ -495,7 +498,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
@@ -505,7 +511,10 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
@@ -515,7 +524,6 @@
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 5df0b24..7a80bd6 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -115,7 +115,7 @@
pwm: pwm@80064000 {
pinctrl-names = "default";
- pinctrl-0 = <&pwm3_pins_b>;
+ pinctrl-0 = <&pwm4_pins_a>;
status = "okay";
};
@@ -170,7 +170,7 @@
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>;
+ pwms = <&pwm 4 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index c5b57d4..fae7b90 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -405,6 +405,17 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ auart4_2pins_b: auart4@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__AUART4_RX
+ MX28_PAD_AUART0_RTS__AUART4_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 0000000..0ff76a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+ model = "Technologic Systems TS-4800";
+ compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x90000000 0x10000000>;
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ clock-frequency = <24576000>;
+ };
+ };
+
+ backlight_reg: regulator-backlight {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enable_lcd>;
+ regulator-name = "enable_lcd_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 78770>;
+ brightness-levels = <0 150 200 255>;
+ default-brightness-level = <1>;
+ power-supply = <&backlight_reg>;
+ };
+
+ display0: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+
+ display-timings {
+ 800x480p60 {
+ native-mode;
+ clock-frequency = <30066000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <50>;
+ hback-porch = <70>;
+ hsync-len = <50>;
+ vback-porch = <0>;
+ vfront-porch = <0>;
+ vsync-len = <50>;
+ };
+ };
+
+ port@0 {
+ display0_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc: m41t00@68 {
+ compatible = "stm,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&ipu_di0_disp0 {
+ remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_backlight>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim>;
+ status = "okay";
+
+ fpga@0 {
+ compatible = "simple-bus";
+ fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+ 0x00000000 0x1c092480 0x00000000>;
+ reg = <0 0x0000000 0x1d000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x1d000>;
+
+ syscon: syscon@b0010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x10000 0x3d>;
+ reg-io-width = <2>;
+
+ wdt@e {
+ compatible = "technologic,ts4800-wdt";
+ syscon = <&syscon 0xe>;
+ };
+ };
+
+ touchscreen {
+ compatible = "technologic,ts4800-ts";
+ reg = <0x12000 0x1000>;
+ syscon = <&syscon 0x10 6>;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
+ >;
+ };
+
+ pinctrl_enable_lcd: enablelcdgrp {
+ fsl,pins = <
+ MX51_PAD_CSI2_D12__GPIO4_9 0x1c5
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ MX51_PAD_GPIO1_0__GPIO1_0 0x100
+ MX51_PAD_GPIO1_1__GPIO1_1 0x100
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180
+ MX51_PAD_EIM_CS5__FEC_CRS 0x00000180
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x00000180
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x00000180
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x00002180
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x00002004
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x00002004
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x00002004
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x00002004
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x00002004
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x00002004
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x00002180
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x000020a4
+ MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
+ MX51_PAD_DI_GP4__DI2_PIN15 0x5
+ >;
+ };
+
+ pinctrl_pwm_backlight: backlightgrp {
+ fsl,pins = <
+ MX51_PAD_GPIO1_2__PWM1_PWMO 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_DTACK__EIM_DTACK 0x85
+ MX51_PAD_EIM_CS0__EIM_CS0 0x0
+ MX51_PAD_EIM_CS1__EIM_CS1 0x0
+ MX51_PAD_EIM_EB0__EIM_EB0 0x85
+ MX51_PAD_EIM_EB1__EIM_EB1 0x85
+ MX51_PAD_EIM_OE__EIM_OE 0x85
+ MX51_PAD_EIM_LBA__EIM_LBA 0x85
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4b0ec07..c13a73a 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -104,10 +104,15 @@
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>;
};
+
+ gpu-subsystem {
+ compatible = "fsl,imx-gpu-subsystem";
+ cores = <&gpu_2d>, <&gpu_3d>;
+ };
};
&gpt {
- compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+ compatible = "fsl,imx6dl-gpt";
};
&hdmi {
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 58adf17..a51834e 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -154,7 +154,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 0000000..5acd0c6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,785 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kosagi Novena Dual/Quad";
+ compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 10000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_novena>;
+ power-supply = <®_lvds_lcd>;
+ brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+ default-brightness-level = <12>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+ user-button {
+ label = "User Button";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_novena>;
+
+ heartbeat {
+ label = "novena:white:panel";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ panel: panel {
+ compatible = "innolux,n133hse-ea1", "simple-panel";
+ backlight = <&backlight>;
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_audio_codec: regulator-audio-codec {
+ compatible = "regulator-fixed";
+ regulator-name = "es8328-power";
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <400000>;
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_display: regulator-display {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-display-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lvds_lcd: regulator-lvds-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-lvds-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie-bus-power";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_sata: regulator-sata {
+ compatible = "regulator-fixed";
+ regulator-name = "sata-power";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <10000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-es8328";
+ model = "imx-audio-es8328";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-amp-supply = <®_audio_codec>;
+ jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ audio-routing =
+ "Speaker", "LOUT2",
+ "Speaker", "ROUT2",
+ "Speaker", "audio-amp",
+ "Headphone", "ROUT1",
+ "Headphone", "LOUT1",
+ "LINPUT1", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "Mic Jack", "Mic Bias";
+ mux-int-port = <0x1>;
+ mux-ext-port = <0x3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_novena>;
+ status = "okay";
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3_novena>;
+ fsl,spi-num-chipselects = <3>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_novena>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <3000>;
+ txd1-skew-ps = <3000>;
+ txd2-skew-ps = <3000>;
+ txd3-skew-ps = <3000>;
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_novena>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_novena>;
+ status = "okay";
+
+ accel: mma8452@1c {
+ compatible = "fsl,mma8452";
+ reg = <0x1c>;
+ };
+
+ rtc: pcf8523@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ sbs_battery: bq20z75@0b {
+ compatible = "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,i2c-retry-count = <50>;
+ };
+
+ touch: stmpe811@44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe_novena>;
+ vio-supply = <®_3p3v>;
+ vcc-supply = <®_3p3v>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_novena>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ reg_sw1a: sw1a {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ reg_sw1c: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw2: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw3a: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw3b: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw4: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_swbst: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ };
+
+ reg_snvs: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vref: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vgen1: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen2: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen3: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vgen4: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_novena>;
+ status = "okay";
+
+ codec: es8328@11 {
+ compatible = "everest,es8328";
+ reg = <0x11>;
+ DVDD-supply = <®_audio_codec>;
+ AVDD-supply = <®_audio_codec>;
+ PVDD-supply = <®_audio_codec>;
+ HPVDD-supply = <®_audio_codec>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sound_novena>;
+ clocks = <&clks IMX6QDL_CLK_CKO1>;
+ assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+ <&clks IMX6QDL_CLK_CKO1_SEL>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+ <&clks IMX6QDL_CLK_CKO1>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+ <&clks IMX6QDL_CLK_OSC>,
+ <&clks IMX6QDL_CLK_CKO1_PODF>;
+ assigned-clock-rates = <0 0 722534400 22579200>;
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_novena>;
+ linux,keymap = <
+ MATRIX_KEY(1, 1, KEY_CONFIG)
+ >;
+ status = "okay";
+};
+
+&ldb {
+ fsl,dual-channel;
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ fsl,panel = <&panel>;
+ status = "okay";
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_novena>;
+ reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sata {
+ target-supply = <®_sata>;
+ fsl,transmit-level-mV = <1025>;
+ fsl,transmit-boost-mdB = <0>;
+ fsl,transmit-atten-16ths = <8>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_novena>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_novena>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_novena>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ dr_mode = "otg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_novena>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_swbst>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_novena>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_novena>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_audmux_novena: audmuxgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_novena: backlightgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1
+ >;
+ };
+
+ pinctrl_ecspi3_novena: ecspi3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet_novena: enetgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ /* Ethernet reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1
+ >;
+ };
+
+ pinctrl_fpga_gpio: fpgagpiogrp-novena {
+ fsl,pins = <
+ /* FPGA power */
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
+ /* Reset */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ /* FPGA GPIOs */
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1
+ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1
+ >;
+ };
+
+ pinctrl_fpga_eim: fpgaeimgrp-novena {
+ fsl,pins = <
+ /* FPGA power */
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
+ /* Reset */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ /* FPGA GPIOs */
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1
+ MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1
+ MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1
+ MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1
+ MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1
+ MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1
+ MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1
+ MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1
+ >;
+ };
+
+ pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+ fsl,pins = <
+ /* User button */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
+ /* PCIe Wakeup */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0
+ /* Lid switch */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_novena: hdmigrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_i2c1_novena: i2c1grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_novena: i2c2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_novena: i2c3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_kpp_novena: kppgrp-novena {
+ fsl,pins = <
+ /* Front panel button */
+ MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1
+ /* Fake column driver, not connected */
+ MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1
+ >;
+ };
+
+ pinctrl_leds_novena: ledsgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1
+ >;
+ };
+
+ pinctrl_pcie_novena: pciegrp-novena {
+ fsl,pins = <
+ /* Reset */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1
+ /* Power On */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
+ /* Wifi kill */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1
+ >;
+ };
+
+ pinctrl_sata_novena: satagrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1
+ >;
+ };
+
+ pinctrl_senoko_novena: senokogrp-novena {
+ fsl,pins = <
+ /* Senoko IRQ line */
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048
+ /* Senoko reset line */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1
+ >;
+ };
+
+ pinctrl_sound_novena: soundgrp-novena {
+ fsl,pins = <
+ /* Audio power regulator */
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1
+ /* Headphone plug */
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_stmpe_novena: stmpegrp-novena {
+ fsl,pins = <
+ /* Touchscreen interrupt */
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2_novena: uart2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_novena: uart3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4_novena: uart4grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg_novena: usbotggrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_novena: usdhc2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ /* Write protect */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
+ /* Card detect */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3_novena: usdhc3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 399103b..9b6a193 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -14,6 +14,7 @@
/ {
aliases {
+ ipu1 = &ipu2;
spi4 = &ecspi5;
};
@@ -153,6 +154,16 @@
status = "disabled";
};
+ gpu_vg: gpu@02204000 {
+ compatible = "vivante,gc";
+ reg = <0x02204000 0x4000>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&gpc 1>;
+ };
+
ipu2: ipu@02800000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -225,6 +236,11 @@
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
};
+
+ gpu-subsystem {
+ compatible = "fsl,imx-gpu-subsystem";
+ cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+ };
};
&hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 7b31fdb..5cd16f2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -94,7 +94,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -174,6 +174,24 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+ status = "disabled";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -294,6 +312,24 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1b66328..9fa8a10 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -151,10 +151,25 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -275,6 +290,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -338,6 +365,15 @@
>;
};
+ pinctrl_ecspi3: escpi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
@@ -429,6 +465,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 7c51839..e8375e1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -152,10 +152,17 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -247,7 +254,7 @@
&ldb {
status = "okay";
- lvds-channel@1 {
+ lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
@@ -280,6 +287,18 @@
};
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -435,6 +454,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 929e0b3..66983dc 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -142,10 +142,17 @@
status = "okay";
};
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+ <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -260,6 +267,8 @@
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
};
snvs_reg: vsnvs {
@@ -336,7 +345,7 @@
&ldb {
status = "okay";
- lvds-channel@1 {
+ lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
@@ -369,6 +378,24 @@
};
};
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+ status = "disabled";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
@@ -528,6 +555,24 @@
>;
};
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 741f3d5..118bea5 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -198,6 +198,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&ssi1 {
status = "okay";
};
@@ -290,6 +302,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index d1e5048..cca39f1 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -164,6 +164,18 @@
status = "okay";
};
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+ status = "disabled";
+};
+
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -242,6 +254,18 @@
>;
};
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 8263fc1..d354d40 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -113,14 +113,14 @@
&clks {
assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
<&clks IMX6QDL_PLL4_BYPASS>,
- <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
<&clks IMX6QDL_CLK_LDB_DI0_SEL>,
- <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+ <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+ <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
<&clks IMX6QDL_PLL4_BYPASS_SRC>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
- assigned-clock-rates = <0>, <0>, <24576000>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
};
&ecspi1 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 2b6cc8b..4f6ae92 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -30,6 +30,7 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ ipu0 = &ipu1;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
@@ -47,15 +48,6 @@
usbphy1 = &usbphy2;
};
- intc: interrupt-controller@00a01000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x00a01000 0x1000>,
- <0x00a00100 0x100>;
- interrupt-parent = <&intc>;
- };
-
clocks {
#address-cells = <1>;
#size-cells = <0>;
@@ -147,6 +139,27 @@
};
};
+ gpu_3d: gpu@00130000 {
+ compatible = "vivante,gc";
+ reg = <0x00130000 0x4000>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+ <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+ clock-names = "bus", "core", "shader";
+ power-domains = <&gpc 1>;
+ };
+
+ gpu_2d: gpu@00134000 {
+ compatible = "vivante,gc";
+ reg = <0x00134000 0x4000>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>;
+ clock-names = "bus", "core";
+ power-domains = <&gpc 1>;
+ };
+
timer@00a00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
@@ -155,6 +168,15 @@
clocks = <&clks IMX6QDL_CLK_TWD>;
};
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
+ };
+
L2: l2-cache@00a02000 {
compatible = "arm,pl310-cache";
reg = <0x00a02000 0x1000>;
@@ -173,8 +195,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
- 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -227,7 +248,7 @@
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7", "dma";
+ "rxtx7", "spba";
status = "disabled";
};
@@ -309,7 +330,7 @@
<&clks IMX6QDL_CLK_ESAI_EXTAL>,
<&clks IMX6QDL_CLK_ESAI_IPG>,
<&clks IMX6QDL_CLK_SPBA>;
- clock-names = "core", "mem", "extal", "fsys", "dma";
+ clock-names = "core", "mem", "extal", "fsys", "spba";
dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
dma-names = "rx", "tx";
status = "disabled";
@@ -378,7 +399,7 @@
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
- "asrck_d", "asrck_e", "asrck_f", "dma";
+ "asrck_d", "asrck_e", "asrck_f", "spba";
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
dma-names = "rxa", "rxb", "rxc",
@@ -906,6 +927,9 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -917,6 +941,9 @@
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -927,6 +954,9 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -937,6 +967,9 @@
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index d8ba99f..d12b250 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -151,7 +151,7 @@
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7", "dma";
+ "rxtx7", "spba";
status = "disabled";
};
@@ -708,6 +708,9 @@
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -718,6 +721,9 @@
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -728,6 +734,9 @@
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 167f77b..a5f7602 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -222,7 +222,7 @@
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
- "rxtx7", "dma";
+ "rxtx7", "spba";
status = "disabled";
};
@@ -295,7 +295,7 @@
<&clks IMX6SX_CLK_ESAI_IPG>,
<&clks IMX6SX_CLK_SPBA>;
clock-names = "core", "mem", "extal",
- "fsys", "dma";
+ "fsys", "spba";
status = "disabled";
};
@@ -348,7 +348,7 @@
<&clks IMX6SX_CLK_ASRC_IPG>,
<&clks IMX6SX_CLK_SPDIF>,
<&clks IMX6SX_CLK_SPBA>;
- clock-names = "mem", "ipg", "asrck", "dma";
+ clock-names = "mem", "ipg", "asrck", "spba";
dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
<&sdma 19 20 1>, <&sdma 20 20 1>,
<&sdma 21 20 1>, <&sdma 22 20 1>;
@@ -783,6 +783,9 @@
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -793,6 +796,9 @@
clocks = <&clks IMX6SX_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -805,6 +811,9 @@
phy_type = "hsic";
fsl,anatop = <&anatop>;
dr_mode = "host";
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -1152,6 +1161,8 @@
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
status = "disabled";
};
@@ -1161,6 +1172,8 @@
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_IPG>;
clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index d00e994..99b6465 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -548,6 +548,9 @@
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
fsl,anatop = <&anatop>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -558,6 +561,9 @@
clocks = <&clks IMX6UL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
status = "disabled";
};
@@ -619,6 +625,18 @@
status = "disabled";
};
+ adc1: adc@02198000 {
+ compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_ADC1>;
+ num-channels = <2>;
+ clock-names = "adc";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
+ status = "disabled";
+ };
+
i2c1: i2c@021a0000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
new file mode 100644
index 0000000..4863451
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -0,0 +1,286 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "CompuLab CL-SOM-iMX7";
+ compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+ memory {
+ reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+ };
+
+ reg_usb_otg1_vbus: regulator-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* use sw1c_reg to align with pfuze100/pfuze200 */
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ pca9555: pca9555@20 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <2>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
new file mode 100644
index 0000000..d63c597
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+ model = "CompuLab SBC-iMX7";
+ compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 432aaf5..b2c4536 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -97,6 +97,16 @@
};
};
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
&cpu0 {
arm-supply = <&sw1a_reg>;
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index ebc053a..25ad309 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -85,9 +85,7 @@
792000 975000
>;
clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
- <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
- clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
+ clocks = <&clks IMX7D_CLK_ARM>;
};
cpu1: cpu@1 {
@@ -583,6 +581,24 @@
reg = <0x30400000 0x400000>;
ranges;
+ adc1: adc@30610000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30610000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ adc2: adc@30620000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30620000 0x10000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
pwm1: pwm@30660000 {
compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
reg = <0x30660000 0x10000>;
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi
index 01aef23..5acbd0d 100644
--- a/arch/arm/boot/dts/k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/k2l-netcp.dtsi
@@ -137,7 +137,7 @@
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
- clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+ clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
new file mode 100644
index 0000000..bc4ec93
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -0,0 +1,238 @@
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+ model = "ZyXEL NSA325";
+ compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_data: pmx-mcu-data {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_clk: pmx-mcu-clk {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_mcu_act: pmx-mcu-act {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_orange: pmx-led-sys-orange {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_htp: pmx-htp {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ /*
+ * Buzzer needs to be switched at around 1kHz so is
+ * not compatible with the gpio-beeper driver.
+ */
+ pmx_buzzer: pmx-buzzer {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_vid_b1: pmx-vid-b1 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_data: pmx-power-resume-data {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_resume_clk: pmx-power-resume-clk {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_sata1: pmx-pwr-sata1 {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
+ /* This board uses the pcf8563 RTC instead of the SoC RTC */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_pwr_sata1>;
+ pinctrl-names = "default";
+
+ usb0_power: regulator@1 {
+ enable-active-high;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+ &pmx_led_usb_green
+ &pmx_led_sys_green &pmx_led_sys_orange
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+ green-sys {
+ label = "nsa325:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
+ orange-sys {
+ label = "nsa325:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa325:green:hdd1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd1 {
+ label = "nsa325:red:hdd1";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd2 {
+ label = "nsa325:green:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd2 {
+ label = "nsa325:red:hdd2";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ green-usb {
+ label = "nsa325:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ green-copy {
+ label = "nsa325:green:copy";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+ red-copy {
+ label = "nsa325:red:copy";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* The following pins are currently not assigned to a driver,
+ some of them should be configured as inputs.
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+ &pmx_htp &pmx_vid_b1
+ &pmx_power_resume_data &pmx_power_resume_clk>; */
+ };
+
+
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
new file mode 100644
index 0000000..1db6f2c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -0,0 +1,178 @@
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "Cloud Engines PogoPlug Series 4";
+ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "uart0:115200n8";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_button_eject>;
+ pinctrl-names = "default";
+
+ button@1 {
+ debounce_interval = <50>;
+ wakeup-source;
+ linux,code = <KEY_EJECTCD>;
+ label = "Eject Button";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ pinctrl-names = "default";
+
+ health {
+ label = "pogoplugv4:green:health";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ fault {
+ label = "pogoplugv4:red:fault";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp21";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata1";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_sdio_wp: pmx-sdio-wp {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_button_eject: pmx-button-eject {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green: pmx-led-green {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_red: pmx-led-red {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ nr-ports = <1>;
+};
+
+&sdio {
+ status = "okay";
+ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+ pinctrl-names = "default";
+ cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+ /* 128 MiB of NAND flash */
+ chip-delay = <40>;
+ status = "okay";
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x200000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "uImage";
+ reg = <0x00200000 0x300000>;
+ };
+
+ partition@500000 {
+ label = "uImage2";
+ reg = <0x00500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "failsafe";
+ reg = <0x00800000 0x800000>;
+ };
+
+ partition@1000000 {
+ label = "root";
+ reg = <0x01000000 0x7000000>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index c56ab6b..0e46560 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -40,7 +40,7 @@
};
poweroff@12100 {
compatible = "qnap,power-off";
- reg = <0x12000 0x100>;
+ reg = <0x12100 0x100>;
clocks = <&gate_clk 7>;
};
spi@10600 {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5b04300..fb13f18 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -23,31 +23,37 @@
label = "sysboot2";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
linux,code = <BTN_0>;
- gpio-key,wakeup;
+ wakeup-source;
};
sysboot5 {
label = "sysboot5";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
linux,code = <BTN_1>;
- gpio-key,wakeup;
+ wakeup-source;
};
gpio1 {
label = "gpio1";
gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
linux,code = <BTN_2>;
- gpio-key,wakeup;
+ wakeup-source;
};
gpio2 {
label = "gpio2";
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
linux,code = <BTN_3>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3logic";
+ ti,mcbsp = <&mcbsp2>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -67,6 +73,20 @@
};
};
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
&charger {
ti,bb-uvolt = <3200000>;
ti,bb-uamp = <150>;
@@ -84,6 +104,70 @@
};
};
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "ok";
+ vdds_dsi-supply = <&vpll2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins1>;
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display@0 {
+ compatible = "panel-dpi";
+ label = "15";
+ status = "okay";
+ /* default-on; */
+ pinctrl-names = "default";
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <4>;
+ vsync-len = <11>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ bl: backlight {
+ compatible = "gpio-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>, /* gpio_56 */
+ <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+ default-on;
+ };
+};
+
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
pinctrl-names = "default";
@@ -119,6 +203,48 @@
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
+
+ tsc2004_pins: pinmux_tsc2004_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
+ >;
+ };
+
+ backlight_pins: pinmux_backlight_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs5.gpio_56 */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
+ >;
+ };
+
+ dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
};
&omap3_pmx_wkup {
@@ -142,6 +268,27 @@
};
};
+&i2c3 {
+ touchscreen: tsc2004@48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vaux1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
&uart1 {
interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 36387b1..7fed0bd 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -96,9 +96,30 @@
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
+
/*
* Only found on the wireless SOM. For the SOM without wireless, the pins for
* MMC3 can be routed with jumpers to the second MMC slot on the devkit and
@@ -136,6 +157,29 @@
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
>;
};
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
+ >;
+ };
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* GPIO_162,BT_EN */
+ >;
+ };
+};
+
+&uart2 {
+ interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
};
&omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 52591d8..053a1f5 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -166,6 +166,17 @@
status = "disabled";
};
+ eeprom: eeprom@4000e000 {
+ compatible = "nxp,lpc1857-eeprom";
+ reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+ reg-names = "reg", "mem";
+ clocks = <&ccu1 CLK_CPU_EEPROM>;
+ clock-names = "eeprom";
+ resets = <&rgu 27>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+
mac: ethernet@40010000 {
compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
reg = <0x40010000 0x2000>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3abebb7..c85cf97 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -11,19 +11,20 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
/ {
compatible = "nxp,lpc3220";
interrupt-parent = <&mic>;
cpus {
- #address-cells = <0>;
+ #address-cells = <1>;
#size-cells = <0>;
- cpu {
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0x0>;
};
};
@@ -31,7 +32,8 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- ranges = <0x20000000 0x20000000 0x30000000>;
+ ranges = <0x20000000 0x20000000 0x30000000>,
+ <0xe0000000 0xe0000000 0x04000000>;
/*
* Enable either SLC or MLC
@@ -49,30 +51,46 @@
status = "disabled";
};
- dma@31000000 {
+ dma: dma@31000000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0x31000000 0x1000>;
interrupts = <0x1c 0>;
};
- /*
- * Enable either ohci or usbd (gadget)!
- */
- ohci@31020000 {
- compatible = "nxp,ohci-nxp", "usb-ohci";
- reg = <0x31020000 0x300>;
- interrupts = <0x3b 0>;
- status = "disabled";
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ /*
+ * Enable either ohci or usbd (gadget)!
+ */
+ ohci: ohci@0 {
+ compatible = "nxp,ohci-nxp", "usb-ohci";
+ reg = <0x0 0x300>;
+ interrupts = <0x3b 0>;
+ status = "disabled";
+ };
+
+ usbd: usbd@0 {
+ compatible = "nxp,lpc3220-udc";
+ reg = <0x0 0x300>;
+ interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+ status = "disabled";
+ };
+
+ i2cusb: i2c@300 {
+ compatible = "nxp,pnx-i2c";
+ reg = <0x300 0x100>;
+ interrupts = <0x3f 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pnx,timeout = <0x64>;
+ };
};
- usbd@31020000 {
- compatible = "nxp,lpc3220-udc";
- reg = <0x31020000 0x300>;
- interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
- status = "disabled";
- };
-
- clcd@31040000 {
+ clcd: clcd@31040000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0x31040000 0x1000>;
interrupts = <0x0e 0>;
@@ -85,6 +103,19 @@
interrupts = <0x1d 0>;
};
+ emc: memory-controller@31080000 {
+ compatible = "arm,pl175", "arm,primecell";
+ reg = <0x31080000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe0000000 0x01000000>,
+ <1 0xe1000000 0x01000000>,
+ <2 0xe2000000 0x01000000>,
+ <3 0xe3000000 0x01000000>;
+ status = "disabled";
+ };
+
apb {
#address-cells = <1>;
#size-cells = <1>;
@@ -118,7 +149,7 @@
reg = <0x20094000 0x1000>;
};
- sd@20098000 {
+ sd: sd@20098000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x20098000 0x1000>;
interrupts = <0x0f 0>, <0x0d 0>;
@@ -192,15 +223,6 @@
status = "disabled";
#pwm-cells = <2>;
};
-
- i2cusb: i2c@31020300 {
- compatible = "nxp,pnx-i2c";
- reg = <0x31020300 0x100>;
- interrupts = <0x3f 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pnx,timeout = <0x64>;
- };
};
fab {
@@ -243,7 +265,7 @@
status = "disabled";
};
- rtc@40024000 {
+ rtc: rtc@40024000 {
compatible = "nxp,lpc3220-rtc";
reg = <0x40024000 0x1000>;
interrupts = <0x34 0>;
@@ -256,11 +278,31 @@
#gpio-cells = <3>; /* bank, pin, flags */
};
- watchdog@4003C000 {
+ timer4: timer@4002C000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4002C000 0x1000>;
+ interrupts = <0x3 0>;
+ status = "disabled";
+ };
+
+ timer5: timer@40030000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40030000 0x1000>;
+ interrupts = <0x4 0>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4003C000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
};
+ timer0: timer@40044000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40044000 0x1000>;
+ interrupts = <0x10 0>;
+ };
+
/*
* TSC vs. ADC: Since those two share the same
* hardware, you need to choose from one of the
@@ -268,30 +310,56 @@
* them
*/
- adc@40048000 {
+ adc: adc@40048000 {
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
status = "disabled";
};
- tsc@40048000 {
+ tsc: tsc@40048000 {
compatible = "nxp,lpc3220-tsc";
reg = <0x40048000 0x1000>;
interrupts = <0x27 0>;
status = "disabled";
};
- key@40050000 {
+ timer1: timer@4004C000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x4004C000 0x1000>;
+ interrupts = <0x11 0>;
+ };
+
+ key: key@40050000 {
compatible = "nxp,lpc3220-key";
reg = <0x40050000 0x1000>;
interrupts = <54 0>;
status = "disabled";
};
- pwm: pwm@4005C000 {
+ timer2: timer@40058000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40058000 0x1000>;
+ interrupts = <0x12 0>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@4005C000 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C000 0x8>;
+ reg = <0x4005C000 0x4>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@4005C004 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005C004 0x4>;
+ status = "disabled";
+ };
+
+ timer3: timer@40060000 {
+ compatible = "nxp,lpc3220-timer";
+ reg = <0x40060000 0x1000>;
+ interrupts = <0x13 0>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
index 5f500c1..5cfadb0 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -99,6 +99,14 @@
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
ssp_pins: ssp-pins {
ssp1_cs {
pins = "p6_7";
@@ -159,6 +167,28 @@
clock-frequency = <50000000>;
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "microchip,24c512";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "microchip,24c02";
+ reg = <0x51>;
+ };
+
+ eeprom@54 {
+ compatible = "microchip,24c512";
+ reg = <0x54>;
+ };
+};
+
&mac {
status = "okay";
phy-mode = "rmii";
@@ -166,6 +196,10 @@
pinctrl-0 = <&enet_rmii_pins>;
};
+&sct_pwm {
+ status = "okay";
+};
+
&ssp1 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 391121d..079d3cf 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -467,6 +467,11 @@
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
+ mma7455@1d {
+ compatible = "fsl,mma7455";
+ reg = <0x1d>;
+ };
+
lm75@48 {
compatible = "nxp,lm75";
reg = <0x48>;
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
index fb9ecc7..72f12db 100644
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ b/arch/arm/boot/dts/lpc4357.dtsi
@@ -37,3 +37,7 @@
};
};
};
+
+&eeprom {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 0521e68..9408753 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -320,6 +320,10 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index fbb89d1..75ecaed 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -105,6 +105,15 @@
bitclock-master;
};
};
+
+ panel: panel {
+ compatible = "nec,nl4827hc19-05b";
+ };
+};
+
+&dcu {
+ fsl,panel = <&panel>;
+ status = "okay";
};
&dspi1 {
@@ -212,6 +221,10 @@
status = "okay";
};
+&sata {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9430a99..2c84ca2 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -143,6 +143,17 @@
status = "disabled";
};
+ sata: sata@3200000 {
+ compatible = "fsl,ls1021a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000>,
+ <0x0 0x20220520 0x0 0x4>;
+ reg-names = "ahci", "sata-ecc";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ dma-coherent;
+ status = "disabled";
+ };
+
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
@@ -428,6 +439,16 @@
<&platform_clk 1>;
};
+ dcu: dcu@2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 0>;
+ clock-names = "dcu";
+ big-endian;
+ status = "disabled";
+ };
+
mdio0: mdio@2d24000 {
compatible = "gianfar";
device_type = "mdio";
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
new file mode 100644
index 0000000..082ca88
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin Lo <erin.lo@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt2701.dtsi"
+
+/ {
+ model = "MediaTek MT2701 evaluation board";
+ compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+
+ memory {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
new file mode 100644
index 0000000..3766904
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+ compatible = "mediatek,mt2701";
+ interrupt-parent = <&sysirq>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt2701-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt2701-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x80>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ sysirq: interrupt-controller@10200100 {
+ compatible = "mediatek,mt2701-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200100 0 0x1c>;
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10211000 0 0x1000>,
+ <0 0x10212000 0 0x1000>,
+ <0 0x10214000 0 0x2000>,
+ <0 0x10216000 0 0x2000>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt2701-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index cb99b02..1d7f92b 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -15,7 +15,7 @@
#include <dt-bindings/clock/mt8135-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/mt8135-resets.h>
+#include <dt-bindings/reset/mt8135-resets.h>
#include "skeleton64.dtsi"
#include "mt8135-pinfunc.h"
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 73f1e3a..01e1e2d 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -69,7 +69,7 @@
label = "user";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
linux,code = <0x114>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -176,18 +176,18 @@
&omap3_pmx_wkup {
gpio1_pins: pinmux_gpio1_pins {
pinctrl-single,pins = <
- 0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+ OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
>;
};
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
pinctrl-single,pins = <
- 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
- 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
- 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
- 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
- 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
- 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
>;
};
};
@@ -200,8 +200,8 @@
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
>;
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 274c2c4..8ba465d 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -80,7 +80,7 @@
label = "user";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,code = <0x114>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -171,7 +171,7 @@
&omap3_pmx_wkup {
gpio1_pins: pinmux_gpio1_pins {
pinctrl-single,pins = <
- 0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
>;
};
};
@@ -195,47 +195,47 @@
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 8c813e7..e5f7f5c 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -238,7 +238,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 9ca2865a..86850bb 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -64,7 +64,7 @@
label = "user";
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_EXTRA>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index 4813e96..738910d 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -68,6 +68,6 @@
ti,keep-vref-on = <1>;
ti,settle-delay-usec = /bits/ 16 <150>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index bb339d1..ac18865 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -66,48 +66,48 @@
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- 0x120 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
- 0x122 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
- 0x124 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
- 0x126 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
>;
};
/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x150 (PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
- 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
>;
};
smsc911x_pins: pinmux_smsc911x_pins {
pinctrl-single,pins = <
- 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
+ OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
>;
};
};
@@ -115,12 +115,12 @@
&omap3_pmx_wkup {
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
pinctrl-single,pins = <
- 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
- 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
- 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
- 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
- 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
- 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e14d15e..5e2d643 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -37,7 +37,7 @@
label = "aux";
linux,code = <169>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 3835e15..33d6b4e 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -15,25 +15,17 @@
model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
- /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
- lbee1usjyc_pdn: lbee1usjyc_pdn {
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-name = "vmmcsdio_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
};
- /* Regulator to trigger the RESET_N_W signal of the Wifi module */
- lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-reset-n-w";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
- enable-active-high;
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
};
};
@@ -51,8 +43,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&lbee1usjyc_pdn>;
- vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 468608da..55b0cc4 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -15,25 +15,17 @@
model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
- /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
- lbee1usjyc_pdn: lbee1usjyc_pdn {
+ vmmcsdio_fixed: fixedregulator-mmcsdio {
compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-name = "vmmcsdio_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
};
- /* Regulator to trigger the RESET_N_W signal of the Wifi module */
- lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc-reset-n-w";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
- enable-active-high;
+ mmc2_pwrseq: mmc2_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>, /* gpio_139 - RESET_N_W */
+ <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 - WIFI_PDN */
};
};
@@ -62,8 +54,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
- vmmc-supply = <&lbee1usjyc_pdn>;
- vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ vmmc-supply = <&vmmcsdio_fixed>;
+ mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
non-removable;
};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index d2fab8c..5401630 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -35,63 +35,63 @@
label = "enter";
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
linux,code = <KEY_ENTER>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f1 {
label = "f1";
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
linux,code = <KEY_F1>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f2 {
label = "f2";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
linux,code = <KEY_F2>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f3 {
label = "f3";
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
linux,code = <KEY_F3>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_f4 {
label = "f4";
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
linux,code = <KEY_F4>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_left {
label = "left";
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
linux,code = <KEY_LEFT>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_right {
label = "right";
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
linux,code = <KEY_RIGHT>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_up {
label = "up";
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
linux,code = <KEY_UP>;
- gpio-key,wakeup;
+ wakeup-source;
};
key_down {
label = "down";
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
@@ -224,32 +224,32 @@
&omap3_pmx_core {
gpio_key_pins: pinmux_gpio_key_pins {
pinctrl-single,pins = <
- 0xea (PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
- 0xec (PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
- 0xee (PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
- 0xf0 (PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
- 0xf2 (PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
- 0xf4 (PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
- 0xf6 (PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
- 0xf8 (PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
- 0xfa (PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
>;
};
musb_pins: pinmux_musb_pins {
pinctrl-single,pins = <
- 0x172 (PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
- 0x17a (PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
- 0x17c (PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
- 0x17e (PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
- 0x180 (PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
- 0x182 (PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
- 0x184 (PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
- 0x186 (PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
- 0x188 (PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
- 0x176 (PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
- 0x178 (PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
- 0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
+ OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
+ OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
+ OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
+ OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
+ OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
+ OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
+ OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
+ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
+ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
+ OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
+ OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
+ OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 57d7c93..93f8dfe 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -327,7 +327,7 @@
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3..74d8f7eb 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -67,28 +67,28 @@
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
- gpio-key,wakeup;
+ wakeup-source;
};
camera_focus {
label = "Camera Focus";
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
- gpio-key,wakeup;
+ wakeup-source;
};
camera_capture {
label = "Camera Capture";
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
linux,code = <0xd4>; /* KEY_CAMERA */
- gpio-key,wakeup;
+ wakeup-source;
};
lock_button {
label = "Lock Button";
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
linux,code = <0x98>; /* KEY_SCREENLOCK */
- gpio-key,wakeup;
+ wakeup-source;
};
keypad_slide {
@@ -96,7 +96,7 @@
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
- gpio-key,wakeup;
+ wakeup-source;
};
proximity_sensor {
@@ -149,15 +149,15 @@
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
>;
};
@@ -198,22 +198,22 @@
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
- 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
- 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
>;
};
@@ -225,85 +225,85 @@
mcspi4_pins: pinmux_mcspi4_pins {
pinctrl-single,pins = <
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
- 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
- 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
- 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
- 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
- 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
>;
};
acx565akm_pins: pinmux_acx565akm_pins {
pinctrl-single,pins = <
- 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
>;
};
dss_sdi_pins: pinmux_dss_sdi_pins {
pinctrl-single,pins = <
- 0x0c0 (PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
- 0x0c2 (PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
- 0x0c4 (PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
- 0x0c6 (PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
- 0x0d8 (PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
- 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
>;
};
wl1251_pins: pinmux_wl1251 {
pinctrl-single,pins = <
- 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
- 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
+ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
>;
};
ssi_pins: pinmux_ssi {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
- 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
- 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
- 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
- 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
- 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
- 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
- 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
>;
};
modem_pins: pinmux_modem {
pinctrl-single,pins = <
- 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
- 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
- 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
- 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
- 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
- 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index e9ee1df..a2c2b8d 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -36,12 +36,12 @@
&omap3_pmx_core {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 7aae8fb..3b3a759 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -48,7 +48,7 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 17b82f8..7df2792 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index b09cedf..6314da2 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -161,6 +161,6 @@
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 5f97959..7e3fe85 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -172,7 +172,7 @@
ti,x-plate-ohms = /bits/ 16 <180>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 49d2254..250cc7f 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 680d726..8df7ec3 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 087aedf..0ea2c45 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -41,13 +41,13 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
- gpio-key,wakeup;
+ wakeup-source;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index cfe140c..13e9d1f 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -84,112 +84,112 @@
label = "up";
linux,code = <KEY_UP>;
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
- gpio-key,wakeup;
+ wakeup-source;
};
down-button {
label = "down";
linux,code = <KEY_DOWN>;
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-button {
label = "left";
linux,code = <KEY_LEFT>;
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-button {
label = "right";
linux,code = <KEY_RIGHT>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
- gpio-key,wakeup;
+ wakeup-source;
};
pageup-button {
label = "game 1";
linux,code = <KEY_PAGEUP>;
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
- gpio-key,wakeup;
+ wakeup-source;
};
pagedown-button {
label = "game 3";
linux,code = <KEY_PAGEDOWN>;
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
- gpio-key,wakeup;
+ wakeup-source;
};
home-button {
label = "game 4";
linux,code = <KEY_HOME>;
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
- gpio-key,wakeup;
+ wakeup-source;
};
end-button {
label = "game 2";
linux,code = <KEY_END>;
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-shift {
label = "l";
linux,code = <KEY_RIGHTSHIFT>;
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
- gpio-key,wakeup;
+ wakeup-source;
};
kp-plus {
label = "l2";
linux,code = <KEY_KPPLUS>;
gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
- gpio-key,wakeup;
+ wakeup-source;
};
right-ctrl {
label = "r";
linux,code = <KEY_RIGHTCTRL>;
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
- gpio-key,wakeup;
+ wakeup-source;
};
kp-minus {
label = "r2";
linux,code = <KEY_KPMINUS>;
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-ctrl {
label = "ctrl";
linux,code = <KEY_LEFTCTRL>;
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
- gpio-key,wakeup;
+ wakeup-source;
};
menu {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
- gpio-key,wakeup;
+ wakeup-source;
};
hold {
label = "hold";
linux,code = <KEY_COFFEE>;
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
- gpio-key,wakeup;
+ wakeup-source;
};
left-alt {
label = "alt";
linux,code = <KEY_LEFTALT>;
gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
- gpio-key,wakeup;
+ wakeup-source;
};
lid {
@@ -617,7 +617,7 @@
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
- linux,wakeup;
+ wakeup-source;
};
lcd: lcd@1 {
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index f4b1a61..157345b 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -66,6 +66,6 @@
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
ti,swap-xy;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 7bc5fdd..f19170b 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -54,27 +54,27 @@
/* REVISIT: twl gpio0 is mmc0_cd */
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
- 0x134 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
- 0x136 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
- 0x138 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
- 0x13a (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */
>;
};
@@ -87,35 +87,35 @@
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
- 0x14e (PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
- 0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- 0x14c (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */
+ OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x144 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
- 0x146 (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
- 0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
- 0x16c (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
- 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
/* wl12xx GPIO output for WLAN_EN */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0xea (PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */
>;
};
};
@@ -135,7 +135,7 @@
&omap3_pmx_wkup {
wlan_host_wkup: pinmux_wlan_host_wkup_pins {
pinctrl-single,pins = <
- 0x1a (PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+ OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
>;
};
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8a2b253..d1ffabb 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -717,6 +717,8 @@
ti,hwmods = "gpmc";
reg = <0x6e000000 0x02d0>;
interrupts = <20>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1a78f01..ab17b99 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -36,7 +36,7 @@
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index 133f1b7..78d3631 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 18d0966..df2e356 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -199,129 +199,129 @@
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
- 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
- 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
- 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
- 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x122 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
- 0x124 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
- 0x126 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
- 0x128 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
- 0x12a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
- 0x12c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
- 0x12e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
- 0x130 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
- 0x132 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
- 0x134 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
- 0x136 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
+ OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
+ OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
+ OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
+ OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
+ OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
+ OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
+ OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
+ OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
+ OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
+ OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
+ OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
- 0x174 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
- 0x176 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
- 0x178 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
- 0x17a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
- 0x17c (PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
- 0x17e (PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
- 0x180 (PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
- 0x182 (PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
- 0x184 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
- 0x186 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
- 0x188 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
- 0x18a (PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
- 0x18c (PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
- 0x18e (PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
+ OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
+ OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
+ OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
+ OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
+ OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
+ OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
+ OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
+ OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
+ OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
+ OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
+ OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
+ OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
+ OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
- 0x190 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
- 0x192 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
- 0x194 (PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
+ OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
+ OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
+ OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
>;
};
tfp410_pins: pinmux_tfp410_pins {
pinctrl-single,pins = <
- 0x144 (PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
+ OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
- 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
hsusbb1_pins: pinmux_hsusbb1_pins {
pinctrl-single,pins = <
- 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
- 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
- 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
- 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
- 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
- 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
- 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
- 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
- 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
- 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
- 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
- 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+ OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+ OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+ OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+ OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+ OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+ OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+ OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+ OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+ OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+ OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+ OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
- 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
- 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
@@ -331,24 +331,24 @@
*/
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
- 0x2c (PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
- 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
- 0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
+ OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
+ OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
+ OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
- 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
- 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
@@ -356,8 +356,8 @@
&omap4_pmx_wkup {
led_wkgpio_pins: pinmux_leds_wkpins {
pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabc..119f8e6 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
&omap4_pmx_core {
led_gpio_pins: gpio_led_pmx {
pinctrl-single,pins = <
- 0xb6 (PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
+ OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3) /* gpio_110 */
>;
};
};
&led_wkgpio_pins {
pinctrl-single,pins = <
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index aad5dda..b4d19a7 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index f0bdc41..aae5132 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -212,143 +212,143 @@
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
- 0xda (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
- 0xdc (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0xde (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
+ OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
- 0x102 (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
- 0x104 (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- 0x106 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
+ OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
uart4_pins: pinmux_uart4_pins {
pinctrl-single,pins = <
- 0x11c (PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
- 0x11e (PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
+ OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
+ OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
>;
};
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0xe0 (PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
- 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
+ OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
+ OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
- 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
- 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
- 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
- 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
+ OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
+ OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
+ OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
+ OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
>;
};
dmic_pins: pinmux_dmic_pins {
pinctrl-single,pins = <
- 0xd0 (PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
- 0xd2 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
- 0xd4 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
- 0xd6 (PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
+ OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
+ OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
+ OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
+ OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
- 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
- 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
- 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+ OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+ OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
+ OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
+ OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0xb6 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
- 0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
- 0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
- 0xbc (PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+ OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+ OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
+ OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
+ OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
>;
};
mcspi1_pins: pinmux_mcspi1_pins {
pinctrl-single,pins = <
- 0xf2 (PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
- 0xf4 (PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
- 0xf6 (PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
- 0xf8 (PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
- 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
+ OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
+ OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x22 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
- 0x48 (PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
+ OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
+ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
+ OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
- 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
- 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
- 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
- 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+ OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+ OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
/* wl12xx GPIO output for WLAN_EN */
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x3c (PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
>;
};
/* wl12xx GPIO inputs and SDIO pins */
wl12xx_pins: pinmux_wl12xx_pins {
pinctrl-single,pins = <
- 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
- 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
- 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
- 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
- 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
+ OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
+ OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
+ OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
+ OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
+ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index f2d2fdb..6e278d7 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -41,7 +41,7 @@
label = "user";
gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
linux,code = <BTN_EXTRA>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5a206c1..2bd9c83 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -348,12 +348,22 @@
#interrupt-cells = <2>;
};
+ elm: elm@48078000 {
+ compatible = "ti,am3352-elm";
+ reg = <0x48078000 0x2000>;
+ interrupts = <4>;
+ ti,hwmods = "elm";
+ status = "disabled";
+ };
+
gpmc: gpmc@50000000 {
compatible = "ti,omap4430-gpmc";
reg = <0x50000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 5cf76a1..888412c 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -139,60 +139,60 @@
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
- 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
+ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
>;
};
mcpdm_pins: pinmux_mcpdm_pins {
pinctrl-single,pins = <
- 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
- 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
- 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
- 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
- 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
+ OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
+ OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */
+ OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */
+ OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */
+ OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */
>;
};
mcbsp1_pins: pinmux_mcbsp1_pins {
pinctrl-single,pins = <
- 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
- 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
- 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
- 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
+ OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */
+ OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */
+ OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */
+ OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
- 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
- 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
- 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
+ OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */
+ OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */
+ OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */
+ OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
mcspi2_pins: pinmux_mcspi2_pins {
pinctrl-single,pins = <
- 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
- 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
- 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
- 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
+ OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+ OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+ OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */
+ OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */
>;
};
mcspi3_pins: pinmux_mcspi3_pins {
pinctrl-single,pins = <
- 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
- 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
- 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
- 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
+ OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */
+ OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */
+ OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */
+ OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */
>;
};
@@ -215,59 +215,59 @@
usbhost_pins: pinmux_usbhost_pins {
pinctrl-single,pins = <
- 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
- 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+ OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+ OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
- 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
- 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+ OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+ OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
- 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
- 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+ OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+ OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
>;
};
led_gpio_pins: pinmux_led_gpio_pins {
pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+ OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
- 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
- 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+ OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+ OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+ OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+ OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
- 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+ OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+ OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
>;
};
uart5_pins: pinmux_uart5_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
- 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
- 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
- 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+ OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+ OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+ OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+ OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
- 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
- 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
- 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
+ OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */
+ OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
- 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+ OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
>;
};
};
@@ -280,13 +280,13 @@
usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
pinctrl-single,pins = <
- 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+ OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
>;
};
wlcore_irq_pin: pinmux_wlcore_irq_pin {
pinctrl-single,pins = <
- OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
+ OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
>;
};
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 3774b37..ecc591d 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -175,7 +175,7 @@
ads7846_pins: pinmux_ads7846_pins {
pinctrl-single,pins = <
- 0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */
+ OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */
>;
};
};
@@ -359,7 +359,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 05b1c1e..60b3fbb 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -40,8 +40,8 @@
&omap5_pmx_core {
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */
- 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */
+ OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */
+ OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0) /* i2c5_sda */
>;
};
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4c04389..ca3c17f 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -391,6 +391,8 @@
#address-cells = <2>;
#size-cells = <1>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma 4>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 90fdbd7..7d253bb 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -12,7 +12,7 @@
*/
/dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
/ {
model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
@@ -22,7 +22,7 @@
memory {
device_type = "memory";
- reg = <0 0x4000000>;
+ reg = <0x80000000 0x4000000>;
};
ahb {
@@ -31,19 +31,6 @@
use-iram;
};
- /* Here, choose exactly one from: ohci, usbd */
- ohci@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-
-/*
- usbd@31020000 {
- transceiver = <&isp1301>;
- status = "okay";
- };
-*/
-
clcd@31040000 {
status = "okay";
};
@@ -123,15 +110,6 @@
clock-frequency = <100000>;
};
- i2cusb: i2c@31020300 {
- clock-frequency = <100000>;
-
- isp1301: usb-transceiver@2c {
- compatible = "nxp,isp1301";
- reg = <0x2c>;
- };
- };
-
ssp0: ssp@20084000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -200,3 +178,18 @@
};
};
};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2c {
+ compatible = "nxp,isp1301";
+ reg = <0x2c>;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 03784f1..21095da 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -54,7 +54,7 @@
/* Buck SMPS */
- pm8921_s1: s1 {
+ s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -62,43 +62,43 @@
bias-pull-down;
};
- pm8921_s3: s3 {
+ s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- pm8921_s4: s4 {
+ s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_s7: s7 {
+ s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_l3: l3 {
+ l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- pm8921_l4: l4 {
+ l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- pm8921_l5: l5 {
+ l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- pm8921_l23: l23 {
+ l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608..aa9303b 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -64,7 +64,7 @@
/* Buck SMPS */
- pm8921_s1: s1 {
+ s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
@@ -72,55 +72,55 @@
bias-pull-down;
};
- pm8921_s3: s3 {
+ s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
- pm8921_s4: s4 {
+ s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_s7: s7 {
+ s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
- pm8921_l3: l3 {
+ l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
- pm8921_l4: l4 {
+ l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
- pm8921_l5: l5 {
+ l5 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <3000000>;
bias-pull-down;
};
- pm8921_l6: l6 {
+ l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
- pm8921_l23: l23 {
+ l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
- pm8921_lvs1: lvs1 {
+ lvs1 {
bias-pull-down;
};
};
@@ -164,7 +164,7 @@
gsbi@16500000 {
status = "ok";
- qcom,mode = <GSBI_PROT_I2C_UART>;
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
serial@16540000 {
status = "ok";
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 0000000..06b3c76
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,436 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z";
+ compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ soc {
+ pinctrl@800000 {
+ gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+ rx {
+ pins = "gpio52";
+ function = "gsbi5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio51";
+ function = "gsbi5";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ sdcc1_pin_a: sdcc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strengh = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_pin_a: sdcc3-pin-active {
+ clk {
+ pins = "sdc3_clk";
+ drive-strengh = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc3_data";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+ pins = "gpio26";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+
+ rpm@108000 {
+ regulators {
+ vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vin_lvs_1_3_6-supply = <&pm8921_s4>;
+ vin_lvs_4_5_7-supply = <&pm8921_s4>;
+ vin_ncp-supply = <&pm8921_l6>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_l24-supply = <&pm8921_s1>;
+ vin_l25-supply = <&pm8921_s1>;
+ vin_l27-supply = <&pm8921_s7>;
+ vin_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ s8 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+
+ /* PMOS LDO */
+ l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ bias-pull-down;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l10 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ bias-pull-down;
+ };
+
+ l11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ bias-pull-down;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l22 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+
+ l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ bias-pull-down;
+ };
+
+ l27 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ l29 {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ lvs1 {
+ bias-pull-down;
+ };
+
+ lvs2 {
+ bias-pull-down;
+ };
+
+ lvs3 {
+ bias-pull-down;
+ };
+
+ lvs4 {
+ bias-pull-down;
+ };
+
+ lvs5 {
+ bias-pull-down;
+ };
+
+ lvs6 {
+ bias-pull-down;
+ };
+
+ lvs7 {
+ bias-pull-down;
+ };
+
+ usb-switch {};
+
+ hdmi-switch {};
+
+ ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ gpio_keys_pin_a: gpio-keys-pin-active {
+ pins = "gpio3", "gpio4", "gpio29", "gpio35";
+ function = "normal";
+
+ bias-pull-up;
+ drive-push-pull;
+ input-enable;
+ power-source = <2>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ qcom,pull-up-strength = <0>;
+ };
+ };
+ };
+ };
+
+ phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ gsbi@1a200000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@1a240000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi5_uart_pin_a>;
+ };
+ };
+
+ amba {
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pin_a>;
+ };
+
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+
+ vmmc-supply = <&pm8921_l6>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a4c1762..edfc6ee5 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -11,6 +11,17 @@
compatible = "qcom,apq8064";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@80000000 {
+ reg = <0x80000000 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -80,6 +91,39 @@
interrupts = <1 10 0x304>;
};
+ clocks {
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ sfpb_mutex: hwmutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_region>;
+
+ hwlocks = <&sfpb_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -156,6 +200,11 @@
};
};
+ sfpb_wrapper_mutex: syscon@1200000 {
+ compatible = "syscon";
+ reg = <0x01200000 0x8000>;
+ };
+
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
@@ -291,6 +340,28 @@
};
};
+ gsbi5: gsbi@1a200000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
+ reg = <0x1a200000 0x03>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gsbi5_serial: serial@1a240000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a240000 0x100>,
+ <0x1a200000 0x03>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
gsbi6: gsbi@16500000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
@@ -336,6 +407,13 @@
};
};
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
@@ -352,7 +430,8 @@
pm8921_gpio: gpio@150 {
- compatible = "qcom,pm8921-gpio";
+ compatible = "qcom,pm8921-gpio",
+ "qcom,ssbi-gpio";
reg = <0x150>;
interrupts = <192 1>, <193 1>, <194 1>,
<195 1>, <196 1>, <197 1>,
@@ -376,7 +455,8 @@
};
pm8921_mpps: mpps@50 {
- compatible = "qcom,pm8921-mpp";
+ compatible = "qcom,pm8921-mpp",
+ "qcom,ssbi-mpp";
reg = <0x50>;
gpio-controller;
#gpio-cells = <2>;
@@ -444,9 +524,55 @@
regulators {
compatible = "qcom,rpm-pm8921-regulators";
+ pm8921_s1: s1 {};
+ pm8921_s2: s2 {};
+ pm8921_s3: s3 {};
+ pm8921_s4: s4 {};
+ pm8921_s7: s7 {};
+ pm8921_s8: s8 {};
+
+ pm8921_l1: l1 {};
+ pm8921_l2: l2 {};
+ pm8921_l3: l3 {};
+ pm8921_l4: l4 {};
+ pm8921_l5: l5 {};
+ pm8921_l6: l6 {};
+ pm8921_l7: l7 {};
+ pm8921_l8: l8 {};
+ pm8921_l9: l9 {};
+ pm8921_l10: l10 {};
+ pm8921_l11: l11 {};
+ pm8921_l12: l12 {};
+ pm8921_l14: l14 {};
+ pm8921_l15: l15 {};
+ pm8921_l16: l16 {};
+ pm8921_l17: l17 {};
+ pm8921_l18: l18 {};
+ pm8921_l21: l21 {};
+ pm8921_l22: l22 {};
+ pm8921_l23: l23 {};
+ pm8921_l24: l24 {};
+ pm8921_l25: l25 {};
+ pm8921_l26: l26 {};
+ pm8921_l27: l27 {};
+ pm8921_l28: l28 {};
+ pm8921_l29: l29 {};
+
+ pm8921_lvs1: lvs1 {};
+ pm8921_lvs2: lvs2 {};
+ pm8921_lvs3: lvs3 {};
+ pm8921_lvs4: lvs4 {};
+ pm8921_lvs5: lvs5 {};
+ pm8921_lvs6: lvs6 {};
+ pm8921_lvs7: lvs7 {};
+
+ pm8921_usb_switch: usb-switch {};
+
pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
+
+ pm8921_ncp: ncp {};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 835bdc7..c0e2053 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -8,6 +8,8 @@
aliases {
serial0 = &blsp1_uart2;
+ usid0 = &pm8941_0;
+ usid4 = &pm8841_0;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index c9c2b76..2052b84 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -3,10 +3,11 @@
/ {
model = "Qualcomm APQ8084/IFC6540";
- compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+ compatible = "qcom,apq8084-sbc", "qcom,apq8084";
aliases {
serial0 = &blsp2_uart2;
+ usid0 = &pma8084_0;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
index 3016c70..d174d15 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -7,6 +7,7 @@
aliases {
serial0 = &blsp2_uart2;
+ usid0 = &pma8084_0;
};
chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index fcffeca..08214cb 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -10,6 +10,17 @@
compatible = "qcom,apq8084";
interrupt-parent = <&intc>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_mem: smem_region@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -89,6 +100,15 @@
clock-frequency = <19200000>;
};
+ smem {
+ compatible = "qcom,smem";
+
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ memory-region = <&smem_mem>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
@@ -103,6 +123,11 @@
<0xf9002000 0x1000>;
};
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -225,6 +250,22 @@
reg = <0xfc400000 0x4000>;
};
+ tcsr_mutex_regs: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x80>;
+ #hwlock-cells = <1>;
+ };
+
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
tlmm: pinctrl@fd510000 {
compatible = "qcom,apq8084-pinctrl";
reg = <0xfd510000 0x4000>;
@@ -282,4 +323,71 @@
#interrupt-cells = <4>;
};
};
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-apq8084";
+ qcom,smd-channels = "rpm_requests";
+
+ pma8084-regulators {
+ compatible = "qcom,rpm-pma8084-regulators";
+
+ pma8084_s1: s1 {};
+ pma8084_s2: s2 {};
+ pma8084_s3: s3 {};
+ pma8084_s4: s4 {};
+ pma8084_s5: s5 {};
+ pma8084_s6: s6 {};
+ pma8084_s7: s7 {};
+ pma8084_s8: s8 {};
+ pma8084_s9: s9 {};
+ pma8084_s10: s10 {};
+ pma8084_s11: s11 {};
+ pma8084_s12: s12 {};
+
+ pma8084_l1: l1 {};
+ pma8084_l2: l2 {};
+ pma8084_l3: l3 {};
+ pma8084_l4: l4 {};
+ pma8084_l5: l5 {};
+ pma8084_l6: l6 {};
+ pma8084_l7: l7 {};
+ pma8084_l8: l8 {};
+ pma8084_l9: l9 {};
+ pma8084_l10: l10 {};
+ pma8084_l11: l11 {};
+ pma8084_l12: l12 {};
+ pma8084_l13: l13 {};
+ pma8084_l14: l14 {};
+ pma8084_l15: l15 {};
+ pma8084_l16: l16 {};
+ pma8084_l17: l17 {};
+ pma8084_l18: l18 {};
+ pma8084_l19: l19 {};
+ pma8084_l20: l20 {};
+ pma8084_l21: l21 {};
+ pma8084_l22: l22 {};
+ pma8084_l23: l23 {};
+ pma8084_l24: l24 {};
+ pma8084_l25: l25 {};
+ pma8084_l26: l26 {};
+ pma8084_l27: l27 {};
+
+ pma8084_lvs1: lvs1 {};
+ pma8084_lvs2: lvs2 {};
+ pma8084_lvs3: lvs3 {};
+ pma8084_lvs4: lvs4 {};
+
+ pma8084_5vs1: 5vs1 {};
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 134cd91..51a40d8 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -49,6 +49,29 @@
qcom,no-pc-write;
};
+ clocks {
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "cxo_board";
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "pxo_board";
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 016f9ad..a0398b6 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -1,6 +1,9 @@
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Sony Xperia Z1";
@@ -14,24 +17,403 @@
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
memory@0 {
reg = <0 0x40000000>, <0x40000000 0x40000000>;
device_type = "memory";
};
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+ vin_5vs-supply = <&pm8941_5v>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-system-load = <200000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_boost: vreg-boost {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vreg-boost";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&boost_bypass_n_pin>;
+ };
};
&soc {
+ sdhci@f9824900 {
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ bus-width = <8>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+ };
+
+ sdhci@f98a4900 {
+ status = "ok";
+
+ bus-width = <4>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ };
+
serial@f991e000 {
status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart2_pin_a>;
+ };
+
+ pinctrl@fd510000 {
+ blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
};
};
&spmi_bus {
pm8941@0 {
+ charger@1000 {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+ };
+
+ gpios@c000 {
+ boost_bypass_n_pin: boost-bypass {
+ pins = "gpio21";
+ function = "normal";
+ };
+
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+ };
+
coincell@2800 {
status = "ok";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
};
+
+ pm8941@1 {
+ wled@d800 {
+ status = "ok";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 753bdfd..dfdafdc 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -319,6 +319,17 @@
interrupts = <0 208 0>;
};
+ blsp_i2c8: i2c@f9964000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9964000 0x1000>;
+ interrupts = <0 102 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
blsp_i2c11: i2c@f9967000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 8f1a0b1..9f357f6 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -3,14 +3,14 @@
&spmi_bus {
- usid4: pm8841@4 {
- compatible = "qcom,spmi-pmic";
+ pm8841_0: pm8841@4 {
+ compatible = "qcom,pm8841", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8841_mpps: mpps@a000 {
- compatible = "qcom,pm8841-mpp";
+ compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
reg = <0xa000 0x400>;
gpio-controller;
#gpio-cells = <2>;
@@ -27,8 +27,8 @@
};
};
- usid5: pm8841@5 {
- compatible = "qcom,spmi-pmic";
+ pm8841_1: pm8841@5 {
+ compatible = "qcom,pm8841", "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index b0d4439..ca53a59 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -4,8 +4,8 @@
&spmi_bus {
- usid0: pm8941@0 {
- compatible ="qcom,spmi-pmic";
+ pm8941_0: pm8941@0 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
@@ -48,7 +48,7 @@
};
pm8941_gpios: gpios@c000 {
- compatible = "qcom,pm8941-gpio";
+ compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
reg = <0xc000 0x2400>;
gpio-controller;
#gpio-cells = <2>;
@@ -91,7 +91,7 @@
};
pm8941_mpps: mpps@a000 {
- compatible = "qcom,pm8941-mpp";
+ compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
reg = <0xa000 0x800>;
gpio-controller;
#gpio-cells = <2>;
@@ -153,23 +153,18 @@
};
};
- usid1: pm8941@1 {
- compatible = "qcom,spmi-pmic";
+ pm8941_1: pm8941@1 {
+ compatible = "qcom,pm8941", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
- wled@d800 {
+ pm8941_wled: wled@d800 {
compatible = "qcom,pm8941-wled";
reg = <0xd800 0x100>;
label = "backlight";
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
+ status = "disabled";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 5e240cc..4e9bd3f 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -4,8 +4,8 @@
&spmi_bus {
- usid0: pma8084@0 {
- compatible = "qcom,spmi-pmic";
+ pma8084_0: pma8084@0 {
+ compatible = "qcom,pma8084", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
@@ -19,7 +19,7 @@
};
pma8084_gpios: gpios@c000 {
- compatible = "qcom,pma8084-gpio";
+ compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
reg = <0xc000 0x1600>;
gpio-controller;
#gpio-cells = <2>;
@@ -48,7 +48,7 @@
};
pma8084_mpps: mpps@a000 {
- compatible = "qcom,pma8084-mpp";
+ compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
reg = <0xa000 0x800>;
gpio-controller;
#gpio-cells = <2>;
@@ -101,8 +101,8 @@
};
};
- usid1: pma8084@1 {
- compatible = "qcom,spmi-pmic";
+ pma8084_1: pma8084@1 {
+ compatible = "qcom,pma8084", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index a4c4259..5902570 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -23,7 +23,7 @@
chosen {
bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
- stdout-path = &scifa0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -110,7 +110,7 @@
gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
linux,code = <KEY_0>;
label = "S16";
- gpio-key,wakeup;
+ wakeup-source;
};
menu-key {
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 105d9c9..78a21f2 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -85,7 +85,7 @@
gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "SW3";
- gpio-key,wakeup;
+ wakeup-source;
};
back-key {
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index e14cb14..7676646 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -26,6 +26,7 @@
reg = <0x0>;
clock-frequency = <800000000>;
power-domains = <&pd_a3sm>;
+ next-level-cache = <&L2>;
};
};
@@ -37,6 +38,18 @@
<0xc2000000 0x1000>;
};
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xf0100000 0x1000>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_a3sm>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,shared-override;
+ cache-unified;
+ cache-level = <2>;
+ };
+
dbsc3: memory-controller@fe400000 {
compatible = "renesas,dbsc3-r8a7740";
reg = <0xfe400000 0x400>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 90543b1..b1aa025 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -28,8 +28,8 @@
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
- stdout-path = &scif0;
+ bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+ stdout-path = "serial0:115200n8";
};
memory {
@@ -137,10 +137,14 @@
};
sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
- "sdhi0_cd";
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
renesas,function = "sdhi0";
};
+ sdhi0_pup_pins: sd0_pup {
+ renesas,groups = "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ bias-pull-up;
+ };
hspi0_pins: hspi0 {
renesas,groups = "hspi0_a";
@@ -168,8 +172,13 @@
};
};
+&rcar_sound {
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+};
+
&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>;
pinctrl-names = "default";
vmmc-supply = <&fixedregulator3v3>;
@@ -184,16 +193,19 @@
status = "okay";
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
- partition@0 {
- label = "data(spi)";
- reg = <0x00000000 0x00100000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data(spi)";
+ reg = <0x00000000 0x00100000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4f8e078..b140627 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -236,7 +236,12 @@
};
rcar_sound: sound@ffd90000 {
- #sound-dai-cells = <1>;
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
reg = <0xffd90000 0x1000>, /* SRU */
<0xffd91000 0x240>, /* SSI */
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index c553abd..44ba69b 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -47,13 +47,13 @@
compatible = "renesas,lager", "renesas,r8a7790";
aliases {
- serial0 = &scifa0;
+ serial0 = &scif0;
serial1 = &scifa1;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scifa0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -77,28 +77,28 @@
button@1 {
linux,code = <KEY_1>;
label = "SW2-1";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
button@2 {
linux,code = <KEY_2>;
label = "SW2-2";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
button@3 {
linux,code = <KEY_3>;
label = "SW2-3";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
button@4 {
linux,code = <KEY_4>;
label = "SW2-4";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
@@ -296,9 +296,9 @@
renesas,function = "du";
};
- scifa0_pins: serial0 {
- renesas,groups = "scifa0_data";
- renesas,function = "scifa0";
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data";
+ renesas,function = "scif0";
};
ether_pins: ether {
@@ -439,8 +439,6 @@
status = "okay";
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -450,25 +448,30 @@
spi-cpol;
m25p,fast-read;
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash";
- reg = <0x00440000 0x03bc0000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
};
};
};
-&scifa0 {
- pinctrl-0 = <&scifa0_pins>;
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e07ae5d..7dfd393 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -143,7 +143,7 @@
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 32 32>;
+ gpio-ranges = <&pfc 0 32 30>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
@@ -156,7 +156,7 @@
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 64 32>;
+ gpio-ranges = <&pfc 0 64 30>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
@@ -266,7 +266,7 @@
};
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -297,7 +297,7 @@
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
@@ -328,7 +328,7 @@
};
audma0: dma-controller@ec700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
0 320 IRQ_TYPE_LEVEL_HIGH
@@ -357,7 +357,7 @@
};
audma1: dma-controller@ec720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
0 333 IRQ_TYPE_LEVEL_HIGH
@@ -386,7 +386,7 @@
};
usb_dmac0: dma-controller@e65a0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
0 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -398,7 +398,7 @@
};
usb_dmac1: dma-controller@e65b0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -417,6 +417,7 @@
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -428,6 +429,7 @@
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -439,6 +441,7 @@
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -450,6 +453,7 @@
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -1766,7 +1770,7 @@
};
ipmmu_sy0: mmu@e6280000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
<0 224 IRQ_TYPE_LEVEL_HIGH>;
@@ -1775,7 +1779,7 @@
};
ipmmu_sy1: mmu@e6290000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1783,7 +1787,7 @@
};
ipmmu_ds: mmu@e6740000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
<0 199 IRQ_TYPE_LEVEL_HIGH>;
@@ -1792,7 +1796,7 @@
};
ipmmu_mp: mmu@ec680000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1800,7 +1804,7 @@
};
ipmmu_mx: mmu@fe951000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
@@ -1809,7 +1813,7 @@
};
ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
deleted file mode 100644
index 655d180..0000000
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Henninger";
- compatible = "renesas,henninger", "renesas,r8a7791";
-
- aliases {
- serial0 = &scif0;
- };
-
- chosen {
- bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory@200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_sdhi0: regulator@0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi0: regulator@1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi2: regulator@2 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi2: regulator@3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI2 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <20000000>;
-};
-
-&pfc {
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_d";
- renesas,function = "scif0";
- };
-
- ether_pins: ether {
- renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
- renesas,function = "eth";
- };
-
- phy1_pins: phy1 {
- renesas,groups = "intc_irq0";
- renesas,function = "intc";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
- renesas,function = "sdhi0";
- };
-
- sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
- };
-
- i2c2_pins: i2c2 {
- renesas,groups = "i2c2";
- renesas,function = "i2c2";
- };
-
- qspi_pins: spi0 {
- renesas,groups = "qspi_ctrl", "qspi_data4";
- renesas,function = "qspi";
- };
-
- msiof0_pins: spi1 {
- renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
- "msiof0_tx";
- renesas,function = "msiof0";
- };
-
- usb0_pins: usb0 {
- renesas,groups = "usb0";
- renesas,function = "usb0";
- };
-
- usb1_pins: usb1 {
- renesas,groups = "usb1";
- renesas,function = "usb1";
- };
-
- vin0_pins: vin0 {
- renesas,groups = "vin0_data8", "vin0_clk";
- renesas,function = "vin0";
- };
-
- can0_pins: can0 {
- renesas,groups = "can0_data";
- renesas,function = "can0";
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-ðer {
- pinctrl-0 = <ðer_pins &phy1_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy1>;
- renesas,ether-link-active-low;
- status = "okay";
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- micrel,led-mode = <1>;
- };
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi2>;
- vqmmc-supply = <&vccq_sdhi2>;
- cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- composite-in@20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin0>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin0ep>;
- };
- };
- };
-};
-
-&qspi {
- pinctrl-0 = <&qspi_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- m25p,fast-read;
-
- partition@0 {
- label = "loader_prg";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user_prg";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash_fs";
- reg = <0x00440000 0x03bc0000>;
- };
- };
-};
-
-&msiof0 {
- pinctrl-0 = <&msiof0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- pmic@0 {
- compatible = "renesas,r2a11302ft";
- reg = <0>;
- spi-max-frequency = <6000000>;
- spi-cpol;
- spi-cpha;
- };
-};
-
-&pci0 {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-};
-
-&pci1 {
- status = "okay";
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-};
-
-&hsusb {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
- renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-&pcie_bus_clk {
- status = "okay";
-};
-
-&pciec {
- status = "okay";
-};
-
-/* composite video input */
-&vin0 {
- status = "okay";
- pinctrl-0 = <&vin0_pins>;
- pinctrl-names = "default";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vin0ep: endpoint {
- remote-endpoint = <&adv7180>;
- bus-width = <8>;
- };
- };
-};
-
-&can0 {
- pinctrl-0 = <&can0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fc44ea3..c94a0fb 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -54,7 +54,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -79,77 +79,77 @@
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW2-1";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW2-2";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW2-3";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW2-4";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-a {
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_A>;
label = "SW30";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-b {
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_B>;
label = "SW31";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-c {
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_C>;
label = "SW32";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-d {
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_D>;
label = "SW33";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-e {
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_E>;
label = "SW34";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-f {
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F>;
label = "SW35";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
key-g {
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_G>;
label = "SW36";
- gpio-key,wakeup;
+ wakeup-source;
debounce-interval = <20>;
};
};
@@ -326,7 +326,7 @@
};
du_pins: du {
- renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
+ renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
renesas,function = "du";
};
@@ -479,8 +479,6 @@
status = "okay";
flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -490,19 +488,24 @@
spi-cpol;
m25p,fast-read;
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
- partition@80000 {
- label = "user";
- reg = <0x00080000 0x00580000>;
- read-only;
- };
- partition@600000 {
- label = "flash";
- reg = <0x00600000 0x03a00000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "user";
+ reg = <0x00080000 0x00580000>;
+ read-only;
+ };
+ partition@600000 {
+ label = "flash";
+ reg = <0x00600000 0x03a00000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fe0f12f..71ba7b6 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -22,7 +22,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -134,6 +134,11 @@
renesas,groups = "vin0_data8", "vin0_clk";
renesas,function = "vin0";
};
+
+ can0_pins: can0 {
+ renesas,groups = "can0_data";
+ renesas,function = "can0";
+ };
};
&scif0 {
@@ -187,8 +192,6 @@
status = "okay";
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -196,19 +199,24 @@
spi-rx-bus-width = <4>;
m25p,fast-read;
- partition@0 {
- label = "loader_prg";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user_prg";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash_fs";
- reg = <0x00440000 0x03bc0000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader_prg";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user_prg";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash_fs";
+ reg = <0x00440000 0x03bc0000>;
+ };
};
};
};
@@ -269,6 +277,14 @@
status = "okay";
};
+&hsusb {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
&usbphy {
status = "okay";
};
@@ -280,3 +296,10 @@
&pciec {
status = "okay";
};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 328f48b..2a369dd 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -100,7 +100,7 @@
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 32 32>;
+ gpio-ranges = <&pfc 0 32 26>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
@@ -255,7 +255,7 @@
};
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -286,7 +286,7 @@
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
@@ -317,7 +317,7 @@
};
audma0: dma-controller@ec700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
0 320 IRQ_TYPE_LEVEL_HIGH
@@ -346,7 +346,7 @@
};
audma1: dma-controller@ec720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
0 333 IRQ_TYPE_LEVEL_HIGH
@@ -375,7 +375,7 @@
};
usb_dmac0: dma-controller@e65a0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
0 109 IRQ_TYPE_LEVEL_HIGH>;
@@ -387,7 +387,7 @@
};
usb_dmac1: dma-controller@e65b0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -407,6 +407,7 @@
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -418,6 +419,7 @@
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -429,6 +431,7 @@
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -440,6 +443,7 @@
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -451,6 +455,7 @@
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -463,6 +468,7 @@
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
@@ -509,7 +515,6 @@
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7791";
reg = <0 0xe6060000 0 0x250>;
- #gpio-range-cells = <3>;
};
mmcif0: mmc@ee200000 {
@@ -786,6 +791,18 @@
status = "disabled";
};
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a7791",
+ "renesas,etheravb-rcar-gen2";
+ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791";
reg = <0 0xee300000 0 0x2000>;
@@ -1163,14 +1180,6 @@
clock-mult = <1>;
clock-output-names = "m2";
};
- imp_clk: imp_clk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- clock-output-names = "imp";
- };
rclk_clk: rclk_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
@@ -1338,16 +1347,18 @@
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
- <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+ <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
- R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+ R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER
+ R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
>;
clock-output-names =
- "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether",
- "sata1", "sata0";
+ "ipmmu_sgx", "mlb", "vin2", "vin1", "vin0",
+ "etheravb", "ether", "sata1", "sata0";
};
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1579,7 +1590,7 @@
};
ipmmu_sy0: mmu@e6280000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
<0 224 IRQ_TYPE_LEVEL_HIGH>;
@@ -1588,7 +1599,7 @@
};
ipmmu_sy1: mmu@e6290000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1596,7 +1607,7 @@
};
ipmmu_ds: mmu@e6740000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
<0 199 IRQ_TYPE_LEVEL_HIGH>;
@@ -1605,7 +1616,7 @@
};
ipmmu_mp: mmu@ec680000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1613,7 +1624,7 @@
};
ipmmu_mx: mmu@fe951000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
@@ -1622,7 +1633,7 @@
};
ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1630,7 +1641,7 @@
};
ipmmu_gp: mmu@e62a0000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
<0 261 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 96443ec..3e31224 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -24,7 +24,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -37,7 +37,37 @@
clock-frequency = <20000000>;
};
+&pfc {
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ scif1_pins: serial1 {
+ renesas,groups = "scif1_data_d";
+ renesas,function = "scif1";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+};
+
ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
@@ -55,9 +85,53 @@
};
&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ m25p,fast-read;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c465404..aef9e69 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -18,6 +18,10 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ spi0 = &qspi;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -53,6 +57,118 @@
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ thermal@e61f0000 {
+ compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal";
+ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -114,12 +230,189 @@
power-domains = <&cpg_clocks>;
};
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a7793";
+ reg = <0 0xe6060000 0 0x250>;
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c60000 0 64>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c70000 0 64>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c78000 0 64>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ reg = <0 0xe6c80000 0 64>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ reg = <0 0xe6c20000 0 64>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ reg = <0 0xe6c30000 0 64>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 64>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+ dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -130,6 +423,92 @@
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
clock-names = "sci_ick";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6e58000 0 64>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6ea8000 0 64>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6ee0000 0 64>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7793", "renesas,scif";
+ reg = <0 0xe6ee8000 0 64>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ reg = <0 0xe62d0000 0 96>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
+ clock-names = "sci_ick";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+ dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -146,6 +525,50 @@
status = "disabled";
};
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7793";
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+ reg-names = "du", "lvds.0";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+ <&mstp7_clks R8A7793_CLK_DU1>,
+ <&mstp7_clks R8A7793_CLK_LVDS0>;
+ clock-names = "du.0", "du.1", "lvds.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -299,6 +722,21 @@
"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
"vsp1-du0", "vsps";
};
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0
+ R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2
+ R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0", "scifb0",
+ "scifb1", "scifb2", "sys-dmac1", "sys-dmac0";
+ };
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7793-mstp-clocks",
"renesas,cpg-mstp-clocks";
@@ -329,6 +767,14 @@
clock-indices = <R8A7793_CLK_IRQC>;
clock-output-names = "irqc";
};
+ mstp5_clks: mstp5_clks@e6150144 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7793_CLK_THERMAL>;
+ clock-output-names = "thermal";
+ };
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7793-mstp-clocks",
"renesas,cpg-mstp-clocks";
@@ -369,6 +815,94 @@
"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
"sata1", "sata0";
};
+ mstp9_clks: mstp9_clks@e6150994 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cpg_clocks R8A7793_CLK_QSPI>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
+ R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
+ R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
+ R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
+ R8A7793_CLK_QSPI_MOD
+ >;
+ clock-output-names =
+ "gpio7", "gpio6", "gpio5", "gpio4",
+ "gpio3", "gpio2", "gpio1", "gpio0",
+ "qspi_mod";
+ };
+ mstp11_clks: mstp11_clks@e615099c {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5
+ >;
+ clock-output-names = "scifa3", "scifa4", "scifa5";
+ };
};
+ ipmmu_sy0: mmu@e6280000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe6280000 0 0x1000>;
+ interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+ <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_sy1: mmu@e6290000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe6290000 0 0x1000>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_ds: mmu@e6740000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe6740000 0 0x1000>;
+ interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+ <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_mp: mmu@ec680000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xec680000 0 0x1000>;
+ interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_mx: mmu@fe951000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xfe951000 0 0x1000>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_rt: mmu@ffc80000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xffc80000 0 0x1000>;
+ interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ ipmmu_gp: mmu@e62a0000 {
+ compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+ reg = <0 0xe62a0000 0 0x1000>;
+ interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+ <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 928cfa6..2394e48 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -21,7 +21,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -33,17 +33,115 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ x2_clk: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ x13_clk: x13-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU0>,
+ <&x13_clk>, <&x2_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
};
&extal_clk {
clock-frequency = <20000000>;
};
+&pfc {
+ du_pins: du {
+ renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
+ renesas,function = "du";
+ };
+
+ scif2_pins: serial2 {
+ renesas,groups = "scif2_data";
+ renesas,function = "scif2";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq8";
+ renesas,function = "intc";
+ };
+
+ i2c1_pins: i2c1 {
+ renesas,groups = "i2c1";
+ renesas,function = "i2c1";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+};
+
&cmt0 {
status = "okay";
};
ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
@@ -56,6 +154,46 @@
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+};
+
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 48ff3e2..5a8dcac 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -12,6 +12,7 @@
/dts-v1/;
#include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "SILK";
@@ -23,7 +24,7 @@
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
memory@40000000 {
@@ -39,6 +40,30 @@
regulator-boot-on;
regulator-always-on;
};
+
+ vcc_sdhi1: regulator@3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator@4 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
};
&extal_clk {
@@ -71,6 +96,11 @@
renesas,function = "mmc";
};
+ sdhi1_pins: sd1 {
+ renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+ renesas,function = "sdhi1";
+ };
+
qspi_pins: spi0 {
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
@@ -147,6 +177,16 @@
status = "okay";
};
+&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
@@ -154,8 +194,6 @@
status = "okay";
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
@@ -165,19 +203,24 @@
spi-cpha;
m25p,fast-read;
- partition@0 {
- label = "loader";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "user";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition@440000 {
- label = "flash";
- reg = <0x00440000 0x03bc0000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a9977d6..6c78f1f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -217,11 +217,10 @@
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a7794";
reg = <0 0xe6060000 0 0x11c>;
- #gpio-range-cells = <3>;
};
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -252,7 +251,7 @@
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
@@ -519,6 +518,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -530,6 +530,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -541,6 +542,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -552,6 +554,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -563,6 +566,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -574,6 +578,7 @@
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
+ i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
@@ -750,6 +755,34 @@
};
};
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7794";
+ reg = <0 0xfeb00000 0 0x40000>;
+ reg-names = "du";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU0>;
+ clock-names = "du.0", "du.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -879,14 +912,6 @@
clock-mult = <1>;
clock-output-names = "m2";
};
- imp_clk: imp_clk {
- compatible = "fixed-factor-clock";
- clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
- #clock-cells = <0>;
- clock-div = <4>;
- clock-mult = <1>;
- clock-output-names = "imp";
- };
rclk_clk: rclk_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
@@ -1025,19 +1050,20 @@
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
clocks = <&mp_clk>, <&mp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
- <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&zx_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
- R8A7794_CLK_SCIF0
+ R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
>;
clock-output-names =
"ehci", "hsusb",
"hscif2", "scif5", "scif4", "hscif1", "hscif0",
- "scif3", "scif2", "scif1", "scif0";
+ "scif3", "scif2", "scif1", "scif0", "du0";
};
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1083,7 +1109,7 @@
};
ipmmu_sy0: mmu@e6280000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
<0 224 IRQ_TYPE_LEVEL_HIGH>;
@@ -1092,7 +1118,7 @@
};
ipmmu_sy1: mmu@e6290000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1100,15 +1126,16 @@
};
ipmmu_ds: mmu@e6740000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
<0 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
+ status = "disabled";
};
ipmmu_mp: mmu@ec680000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
@@ -1116,15 +1143,16 @@
};
ipmmu_mx: mmu@fe951000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
+ status = "disabled";
};
ipmmu_gp: mmu@e62a0000 {
- compatible = "renesas,ipmmu-vmsa";
+ compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
<0 261 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
new file mode 100644
index 0000000..28a0336
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -0,0 +1,64 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+ model = "Rockchip RK3036 Evaluation board";
+ compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+};
+
+&i2c1 {
+ status = "okay";
+
+ hym8563: hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
new file mode 100644
index 0000000..992f9ca
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -0,0 +1,300 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+ model = "Rockchip RK3036 KylinBoard";
+ compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&acodec {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_18>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vccio_pmu>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vccio_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vout5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vout5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_codec: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_wl: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&sdio {
+ status = "okay";
+
+ broken-cd;
+ bus-width = <4>;
+ cap-sdio-irq;
+ default-sample-phase = <90>;
+ keep-power-in-suspend;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
+ };
+ };
+
+ sleep {
+ global_pwroff: global-pwroff {
+ rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 0000000..b9567c1
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,622 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3036";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ mshc0 = &emmc;
+ mshc1 = &sdmmc;
+ mshc2 = &sdio;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "rockchip,rk3036-smp";
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ resets = <&cru SRST_CORE0>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ bus_intmem@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10080000 0x2000>;
+
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x00 0x10>;
+ };
+ };
+
+ gic: interrupt-controller@10139000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x10139000 0x1000>,
+ <0x1013a000 0x1000>,
+ <0x1013c000 0x2000>,
+ <0x1013e000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ usb_otg: usb@10180000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <275>;
+ g-tx-fifo-size = <256 128 128 64 64 32>;
+ g-use-dma;
+ status = "disabled";
+ };
+
+ usb_host: usb@101c0000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x101c0000 0x40000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG1>;
+ clock-names = "otg";
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@10214000 {
+ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x10214000 0x4000>;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@10218000 {
+ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x10218000 0x4000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@1021c000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0x1021c000 0x4000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ default-sample-phase = <158>;
+ disable-wp;
+ dmas = <&pdma 12>;
+ dma-names = "rx-tx";
+ fifo-depth = <0x100>;
+ mmc-ddr-1_8v;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "disabled";
+ };
+
+ i2s: i2s@10220000 {
+ compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10220000 0x4000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_bus>;
+ status = "disabled";
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ grf: syscon@20008000 {
+ compatible = "rockchip,rk3036-grf", "syscon";
+ reg = <0x20008000 0x1000>;
+ };
+
+ acodec: acodec-ana@20030000 {
+ compatible = "rk3036-codec";
+ reg = <0x20030000 0x4000>;
+ rockchip,grf = <&grf>;
+ clock-names = "acodec_pclk";
+ clocks = <&cru PCLK_ACODEC>;
+ status = "disabled";
+ };
+
+ timer: timer@20044000 {
+ compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+ reg = <0x20044000 0x20>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ pwm0: pwm@20050000 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050000 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@20050010 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050010 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@20050020 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050020 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@20050030 {
+ compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+ reg = <0x20050030 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@20056000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20056000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@2005a000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x2005a000 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ uart0: serial@20060000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ uart1: serial@20064000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20064000 0x100>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ status = "disabled";
+ };
+
+ uart2: serial@20068000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg = <0x20068000 0x100>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@20072000 {
+ compatible = "rockchip,rk3288-i2c";
+ reg = <0x20072000 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3036-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@2007c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2007c000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20080000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20084000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_default: pcfg_pull_default {
+ bias-pull-pin-default;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <0 1 2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <0 27 1 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdmmc_cd: sdmcc-cd {
+ rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
+ <1 19 RK_FUNC_1 &pcfg_pull_default>,
+ <1 20 RK_FUNC_1 &pcfg_pull_default>,
+ <1 21 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ sdio {
+ sdio_bus1: sdio-bus1 {
+ rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
+ <0 12 RK_FUNC_1 &pcfg_pull_default>,
+ <0 13 RK_FUNC_1 &pcfg_pull_default>,
+ <0 14 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ sdio_clk: sdio-clk {
+ rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ emmc {
+ /*
+ * We run eMMC at max speed; bump up drive strength.
+ * We also have external pulls, so disable the internal ones.
+ */
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
+ <1 25 RK_FUNC_2 &pcfg_pull_default>,
+ <1 26 RK_FUNC_2 &pcfg_pull_default>,
+ <1 27 RK_FUNC_2 &pcfg_pull_default>,
+ <1 28 RK_FUNC_2 &pcfg_pull_default>,
+ <1 29 RK_FUNC_2 &pcfg_pull_default>,
+ <1 30 RK_FUNC_2 &pcfg_pull_default>,
+ <1 31 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+ <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+ <2 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s {
+ i2s_bus: i2s-bus {
+ rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_none>,
+ <1 1 RK_FUNC_1 &pcfg_pull_none>,
+ <1 2 RK_FUNC_1 &pcfg_pull_none>,
+ <1 3 RK_FUNC_1 &pcfg_pull_none>,
+ <1 4 RK_FUNC_1 &pcfg_pull_none>,
+ <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
+ <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
+ <2 23 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart1 */
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ /* no rts / cts for uart2 */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 946f187..58bac50 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -103,6 +103,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -118,6 +120,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -133,6 +137,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -153,6 +159,19 @@
clock-names = "timer", "pclk";
};
+ efuse: efuse@20010000 {
+ compatible = "rockchip,rockchip-efuse";
+ reg = <0x20010000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu_leakage {
+ reg = <0x17 0x1>;
+ };
+ };
+
timer@20038000 {
compatible = "snps,dw-apb-timer-osc";
reg = <0x20038000 0x100>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 6399942..348d46b 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -118,6 +118,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
@@ -144,6 +146,19 @@
#reset-cells = <1>;
};
+ efuse: efuse@20010000 {
+ compatible = "rockchip,rockchip-efuse";
+ reg = <0x20010000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu_leakage {
+ reg = <0x17 0x1>;
+ };
+ };
+
usbphy: phy {
compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
new file mode 100644
index 0000000..e3898b8
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -0,0 +1,66 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3228.dtsi"
+
+/ {
+ model = "Rockchip RK3228 Evaluation board";
+ compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+};
+
+&emmc {
+ broken-cd;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ disable-wp;
+ non-removable;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi
new file mode 100644
index 0000000..119ff12
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228.dtsi
@@ -0,0 +1,442 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3228";
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ resets = <&cru SRST_CORE0>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+
+ cpu2: cpu@f02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf02>;
+ resets = <&cru SRST_CORE2>;
+ };
+
+ cpu3: cpu@f03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf03>;
+ resets = <&cru SRST_CORE3>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@110f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x110f0000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ grf: syscon@11000000 {
+ compatible = "syscon";
+ reg = <0x11000000 0x1000>;
+ };
+
+ uart0: serial@11010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11010000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@11020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11020000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@11030000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11030000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@110b0000 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0000 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@110b0010 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0010 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@110b0020 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0020 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@110b0030 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0030 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ status = "disabled";
+ };
+
+ timer: timer@110c0000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0x110c0000 0x20>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ cru: clock-controller@110e0000 {
+ compatible = "rockchip,rk3228-cru";
+ reg = <0x110e0000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ emmc: dwmmc@30020000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0x30020000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ bus-width = <8>;
+ default-sample-phase = <158>;
+ num-slots = <1>;
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@32010000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x32011000 0x1000>,
+ <0x32012000 0x1000>,
+ <0x32014000 0x2000>,
+ <0x32016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3228-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@11110000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11110000 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@11120000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11120000 0x100>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@11130000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11130000 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@11140000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11140000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+ <1 25 RK_FUNC_2 &pcfg_pull_none>,
+ <1 26 RK_FUNC_2 &pcfg_pull_none>,
+ <1 27 RK_FUNC_2 &pcfg_pull_none>,
+ <1 28 RK_FUNC_2 &pcfg_pull_none>,
+ <1 29 RK_FUNC_2 &pcfg_pull_none>,
+ <1 30 RK_FUNC_2 &pcfg_pull_none>,
+ <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
+ <2 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
+ <1 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart2_cts: uart2-cts {
+ rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart2_rts: uart2-rts {
+ rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 43949a6..452ca24 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -43,10 +43,26 @@
/ {
compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
-};
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
+ vcc_lcd: vcc-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ regulator-name = "vcc_lcd";
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_wl: vcc-wl {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwr>;
+ regulator-name = "vcc_wl";
+ vin-supply = <&vcc_18>;
+ };
};
&i2c0 {
@@ -119,8 +135,8 @@
vdd_log: REG3 {
regulator-name = "VDD_LOG";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
@@ -133,7 +149,7 @@
vccio_sd: REG5 {
regulator-name = "VCCIO_SD";
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -152,7 +168,7 @@
regulator-always-on;
};
- vcca_tp: REG8 {
+ vcc_tp: REG8 {
regulator-name = "VCCA_TP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -189,3 +205,17 @@
};
};
};
+
+&pinctrl {
+ lcd {
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_pwr: wifi-pwr {
+ rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 18eb6cb..736b08b 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -43,17 +43,6 @@
/ {
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
};
&i2c0 {
@@ -244,19 +233,3 @@
};
};
};
-
-&gmac {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..4faabdb 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -89,6 +89,13 @@
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
};
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -160,6 +167,10 @@
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
&emmc {
broken-cd;
bus-width = <8>;
@@ -172,11 +183,6 @@
status = "okay";
};
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -191,6 +197,27 @@
vqmmc-supply = <&vccio_sd>;
};
+&gmac {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc7..17f13c7 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -78,6 +78,13 @@
};
};
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -310,6 +317,12 @@
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 1813b7c3..1ece66f 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -109,6 +109,7 @@
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
+ system-power-controller;
inl1-supply = <&vcc_io>;
inl2-supply = <&vcc_sys>;
inl3-supply = <&vcc_20>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 8af35c8..c5453a0 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -49,6 +49,13 @@
stdout-path = "serial2:115200n8";
};
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "SPDIF";
@@ -131,6 +138,12 @@
};
&pinctrl {
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi
index 3404066..651b962 100644
--- a/arch/arm/boot/dts/rk3288-thermal.dtsi
+++ b/arch/arm/boot/dts/rk3288-thermal.dtsi
@@ -52,7 +52,7 @@
};
cpu_thermal: cpu_thermal {
- polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 1>;
@@ -63,6 +63,11 @@
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
@@ -74,13 +79,18 @@
map0 {
trip = <&cpu_alert0>;
cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 6>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu_thermal: gpu_thermal {
- polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 2>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
new file mode 100644
index 0000000..cf5311d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -0,0 +1,139 @@
+/*
+ * Google Veyron Brain Rev 0 board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+ model = "Google Brain";
+ compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+ "google,veyron", "rockchip,rk3288";
+
+ vcc33_sys: vcc33-sys {
+ vin-supply = <&vcc_5v>;
+ };
+
+ vcc33_io: vcc33_io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_io";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc33_sys>;
+ /* This is gated by vcc_18 too */
+ };
+
+ /* This turns on vbus for host2 and otg (dwc2) */
+ vcc5_host2: vcc5-host2-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pwr_en>;
+ regulator-name = "vcc5_host2";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&pinctrl {
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ usb-host {
+ usb2_pwr_en: usb2-pwr-en {
+ rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ /delete-property/ vcc6-supply;
+
+ regulators {
+ /* vcc33_io is sourced directly from vcc33_sys */
+ /delete-node/ LDO_REG1;
+
+ /* This is not a pwren anymore, but the real power supply */
+ vdd10_lcd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-suspend-mem-disabled;
+ };
+
+ vcc18_hdmi: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc18_hdmi";
+ regulator-suspend-mem-disabled;
+ };
+ };
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 0000000..f36f6f4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,250 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+ model = "Google Mickey";
+ compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
+ vcc_5v: vcc-5v {
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc33_io: vcc33_io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc33_io";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc33_sys>;
+ };
+};
+
+&cpu_thermal {
+ /delete-node/ trips;
+ /delete-node/ cooling-maps;
+
+ trips {
+ cpu_alert_almost_warm: cpu_alert_almost_warm {
+ temperature = <63000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_warm: cpu_alert_warm {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_almost_hot: cpu_alert_almost_hot {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_hot: cpu_alert_hot {
+ temperature = <82000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_hotter: cpu_alert_hotter {
+ temperature = <84000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert_very_hot: cpu_alert_very_hot {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * After 1st level, throttle the CPU down to as low as 1.4 GHz
+ * and don't let the GPU go faster than 400 MHz. Note that we
+ * won't throttle the GPU lower than 400 MHz due to CPU
+ * heat--we'll let the GPU do the rest itself.
+ */
+ cpu_warm_limit_cpu {
+ trip = <&cpu_alert_warm>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 4>;
+ };
+
+ /*
+ * Add some discrete steps to help throttling system deal
+ * with the fact that there are two passive cooling devices:
+ * the CPU and the GPU.
+ *
+ * - 1.2 GHz - 1.0 GHz (almost hot)
+ * - 800 MHz (hot)
+ * - 800 MHz - 696 MHz (hotter)
+ * - 696 MHz - min (very hot)
+ *
+ * Note:
+ * - 800 MHz appears to be a "sweet spot" for me. I can run
+ * some pretty serious workload here and be happy.
+ * - After 696 MHz we stop lowering voltage, so throttling
+ * past there is less effective.
+ */
+ cpu_almost_hot_limit_cpu {
+ trip = <&cpu_alert_almost_hot>;
+ cooling-device =
+ <&cpu0 5 6>;
+ };
+ cpu_hot_limit_cpu {
+ trip = <&cpu_alert_hot>;
+ cooling-device =
+ <&cpu0 7 7>;
+ };
+ cpu_hotter_limit_cpu {
+ trip = <&cpu_alert_hotter>;
+ cooling-device =
+ <&cpu0 7 8>;
+ };
+ cpu_very_hot_limit_cpu {
+ trip = <&cpu_alert_very_hot>;
+ cooling-device =
+ <&cpu0 8 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&emmc {
+ /delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c4 {
+ status = "disabled";
+};
+
+&i2s {
+ status = "okay";
+ clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ /delete-property/ vcc6-supply;
+ /delete-property/ vcc12-supply;
+
+ vcc11-supply = <&vcc33_sys>;
+
+ regulators {
+ /* vcc33_io is sourced directly from vcc33_sys */
+ /delete-node/ LDO_REG1;
+ /delete-node/ LDO_REG7;
+
+ /* This is not a pwren anymore, but the real power supply */
+ vdd10_lcd: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-suspend-mem-disabled;
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-suspend-mem-disabled;
+ };
+ };
+};
+
+&pinctrl {
+ hdmi {
+ power_hdmi_on: power-hdmi-on {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&usb_host0_ehci {
+ status = "disabled";
+};
+
+&usb_host1 {
+ status = "disabled";
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 8fd8ef2..699beb0 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -86,6 +86,10 @@
};
};
+&emmc {
+ /delete-property/mmc-hs200-1_8v;
+};
+
&gpio_keys {
pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
@@ -117,6 +121,18 @@
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>;
i2c-scl-rising-time-ns = <300>;
+
+ touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_int &touch_rst>;
+ reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ vcc33-supply = <&vcc33_touch>;
+ vccio-supply = <&vcc33_touch>;
+ };
};
&rk808 {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index a7ea7d0..b34a7b5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -88,6 +88,14 @@
};
};
+&cpu_alert0 {
+ temperature = <65000>;
+};
+
+&cpu_alert1 {
+ temperature = <70000>;
+};
+
&rk808 {
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 5e61f07..9fce91f 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -340,6 +340,11 @@
i2c-scl-rising-time-ns = <1000>;
};
+&power {
+ assigned-clocks = <&cru SCLK_EDP_24M>;
+ assigned-clock-parents = <&xin24m>;
+};
+
&pwm1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..8ac49f3 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -53,6 +53,7 @@
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
@@ -452,8 +453,10 @@
clock-names = "tsadc", "apb_pclk";
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
- pinctrl-names = "default";
- pinctrl-0 = <&otp_out>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <1>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
@@ -775,9 +778,23 @@
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};
+ crypto: cypto-controller@ff8a0000 {
+ compatible = "rockchip,rk3288-crypto";
+ reg = <0xff8a0000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+ <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+ clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+ resets = <&cru SRST_CRYPTO>;
+ reset-names = "crypto-rst";
+ status = "okay";
+ };
+
vopb: vop@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0xff930000 0x19c>;
@@ -884,6 +901,19 @@
interrupts = <GIC_PPI 9 0xf04>;
};
+ efuse: efuse@ffb40000 {
+ compatible = "rockchip,rockchip-efuse";
+ reg = <0xffb40000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE256>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu_leakage@17 {
+ reg = <0x17 0x1>;
+ };
+ };
+
usbphy: phy {
compatible = "rockchip,rk3288-usb-phy";
rockchip,grf = <&grf>;
@@ -1142,7 +1172,7 @@
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
};
- sdmmc_cd: sdmcc-cd {
+ sdmmc_cd: sdmmc-cd {
rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
};
@@ -1395,6 +1425,10 @@
};
tsadc {
+ otp_gpio: otp-gpio {
+ rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
otp_out: otp-out {
rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 4497d28..99eeea7 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -49,6 +49,7 @@
interrupt-parent = <&gic>;
aliases {
+ ethernet0 = &emac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 4dfca8f..3f750f6 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -637,6 +637,12 @@
atmel,clk-output-range = <0 83000000>;
};
+ pdmic_clk: pdmic_clk {
+ #clock-cells = <0>;
+ reg = <48>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
i2s0_clk: i2s0_clk {
#clock-cells = <0>;
reg = <54>;
@@ -763,6 +769,11 @@
atmel,clk-output-range = <0 83000000>;
};
+ pdmic_gclk: pdmic_gclk {
+ #clock-cells = <0>;
+ reg = <48>;
+ };
+
i2s0_gclk: i2s0_gclk {
#clock-cells = <0>;
reg = <54>;
@@ -852,6 +863,19 @@
clock-names = "t0_clk", "slow_clk";
};
+ pdmic: pdmic@f8018000 {
+ compatible = "atmel,sama5d2-pdmic";
+ reg = <0xf8018000 0x124>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(50))>;
+ dma-names = "rx";
+ clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
uart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x100>;
@@ -929,6 +953,13 @@
clocks = <&h32ck>;
};
+ watchdog@f8048040 {
+ compatible = "atmel,sama5d4-wdt";
+ reg = <0xf8048040 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+
sckc@f8048050 {
compatible = "atmel,at91sam9x5-sckc";
reg = <0xf8048050 0x4>;
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index d9a9aca..e812f5c 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -49,7 +49,7 @@
label = "pb_user1";
gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 15bbaf6..b8032bc 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -451,7 +451,7 @@
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <125000000 177000000>;
+ atmel,clk-output-range = <125000000 200000000>;
atmel,clk-divisors = <1 2 4 3>;
};
@@ -916,7 +916,7 @@
};
i2c0: i2c@f8014000 {
- compatible = "atmel,at91sam9x5-i2c";
+ compatible = "atmel,sama5d4-i2c";
reg = <0xf8014000 0x4000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1
@@ -935,7 +935,7 @@
};
i2c1: i2c@f8018000 {
- compatible = "atmel,at91sam9x5-i2c";
+ compatible = "atmel,sama5d4-i2c";
reg = <0xf8018000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1
@@ -975,7 +975,7 @@
};
i2c2: i2c@f8024000 {
- compatible = "atmel,at91sam9x5-i2c";
+ compatible = "atmel,sama5d4-i2c";
reg = <0xf8024000 0x4000>;
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1
@@ -1300,7 +1300,7 @@
};
watchdog@fc068640 {
- compatible = "atmel,at91sam9260-wdt";
+ compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
clocks = <&clk32k>;
status = "disabled";
@@ -1669,15 +1669,23 @@
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
atmel,pins =
<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */
- AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDB, conflict with NAND_D0 */
- AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB0, conflict with NAND_D1 */
+ AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDA, conflict with NAND_D0 */
+ AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA0, conflict with NAND_D1 */
>;
};
pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
atmel,pins =
- <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB1, conflict with NAND_D2 */
- AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB2, conflict with NAND_D3 */
- AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB3, conflict with NAND_D4 */
+ <AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA1, conflict with NAND_D2 */
+ AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA2, conflict with NAND_D3 */
+ AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA3, conflict with NAND_D4 */
+ >;
+ };
+ pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA4, conflict with NAND_D5 */
+ AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA5, conflict with NAND_D6 */
+ AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA6, conflict with NAND_D7 */
+ AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DA7, conflict with NAND_OE */
>;
};
};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 7fc5602..aa8bae3 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -147,7 +147,7 @@
gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
label = "SW1";
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index ff7c8f2..3a6056f 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -28,6 +28,7 @@
reg = <0>;
clock-frequency = <1196000000>;
power-domains = <&pd_a2sl>;
+ next-level-cache = <&L2>;
};
cpu@1 {
device_type = "cpu";
@@ -35,6 +36,7 @@
reg = <1>;
clock-frequency = <1196000000>;
power-domains = <&pd_a2sl>;
+ next-level-cache = <&L2>;
};
};
@@ -53,6 +55,18 @@
<0xf0000100 0x100>;
};
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xf0100000 0x1000>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_a3sm>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ arm,shared-override;
+ cache-unified;
+ cache-level = <2>;
+ };
+
sbsc2: memory-controller@fb400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfb400000 0x400>;
@@ -259,6 +273,50 @@
status = "disabled";
};
+ msiof0: spi@e6e20000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6e20000 0x0064>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6e10000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6e10000 0x0064>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6e00000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6e00000 0x0064>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c90000 {
+ compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+ reg = <0xe6c90000 0x0064>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
+ power-domains = <&pd_a3sp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
@@ -798,13 +856,13 @@
mstp0_clks: mstp0_clks@e6150130 {
compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xe6150130 4>, <0xe6150030 4>;
- clocks = <&cpg_clocks SH73A0_CLK_HP>;
+ clocks = <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>;
#clock-cells = <1>;
clock-indices = <
- SH73A0_CLK_IIC2
+ SH73A0_CLK_IIC2 SH73A0_CLK_MSIOF0
>;
clock-output-names =
- "iic2";
+ "iic2", "msiof0";
};
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -834,20 +892,24 @@
reg = <0xe6150138 4>, <0xe6150040 4>;
clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
<&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
- <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>,
- <&sub_clk>, <&sub_clk>;
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>,
+ <&sub_clk>, <&sub_clk>, <&sub_clk>;
#clock-cells = <1>;
clock-indices = <
SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
- SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5
- SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0
- SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2
- SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4
+ SH73A0_CLK_MP_DMAC SH73A0_CLK_MSIOF3
+ SH73A0_CLK_MSIOF1 SH73A0_CLK_SCIFA5
+ SH73A0_CLK_SCIFB SH73A0_CLK_MSIOF2
+ SH73A0_CLK_SCIFA0 SH73A0_CLK_SCIFA1
+ SH73A0_CLK_SCIFA2 SH73A0_CLK_SCIFA3
+ SH73A0_CLK_SCIFA4
>;
clock-output-names =
- "scifa7", "sy_dmac", "mp_dmac", "scifa5",
- "scifb", "scifa0", "scifa1", "scifa2",
- "scifa3", "scifa4";
+ "scifa7", "sy_dmac", "mp_dmac", "msiof3",
+ "msiof1", "scifa5", "scifb", "msiof2",
+ "scifa0", "scifa1", "scifa2", "scifa3",
+ "scifa4";
};
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 39c470e..3ed4abd 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -677,6 +677,7 @@
#size-cells = <0>;
clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
+ status = "disabled";
};
ocram: sram@ffff0000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index a75a666..3c88678 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -79,6 +79,7 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index 555e9ca..afea364 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -100,6 +100,7 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&uart0 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 0000000..f86f9c0
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+ model = "DENX MCV";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1 GiB */
+ };
+};
+
+&mmc0 { /* On-SoM eMMC */
+ bus-width = <8>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 0000000..7186a29
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+ model = "DENX MCV EVK";
+ compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+ aliases {
+ ethernet0 = &gmac0;
+ stmpe-i2c0 = &stmpe1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&gmac0 {
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&gpio0 { /* GPIO 0 ... 28 */
+ status = "okay";
+};
+
+&gpio1 { /* GPIO 29 ... 57 */
+ status = "okay";
+};
+
+&gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ speed-mode = <0>;
+
+ stmpe1: stmpe811@41 {
+ compatible = "st,stmpe811";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ reg = <0>;
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <1>;
+ ts,touch-det-delay = <3>;
+ ts,settling = <4>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index d4d0a28..15e43f4 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -84,6 +84,7 @@
cd-gpios = <&portb 18 0>;
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 48bf651..b61f22f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -80,6 +80,7 @@
&mmc0 {
vmmc-supply = <®ulator_3_3v>;
vqmmc-supply = <®ulator_3_3v>;
+ status = "okay";
};
&usb1 {
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 50f5e9d..341f5b7 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -512,63 +512,51 @@
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
- regulator-compatible = "db8500_vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
- regulator-compatible = "db8500_varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
- regulator-compatible = "db8500_vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
- regulator-compatible = "db8500_vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
- regulator-compatible = "db8500_vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
- regulator-compatible = "db8500_vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
- regulator-compatible = "db8500_vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
- regulator-compatible = "db8500_vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
- regulator-compatible = "db8500_sva_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
- regulator-compatible = "db8500_sva_mmdsp_ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
- regulator-compatible = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
- regulator-compatible = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
@@ -577,39 +565,32 @@
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
- regulator-compatible = "db8500_sia_pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
- regulator-compatible = "db8500_sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
- regulator-compatible = "db8500_b2r2_mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
- regulator-compatible = "db8500_esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
- regulator-compatible = "db8500_esram12_ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
- regulator-compatible = "db8500_esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
- regulator-compatible = "db8500_esram34_ret";
};
};
@@ -721,7 +702,6 @@
compatible = "stericsson,ab8500-ext-regulator";
ab8500_ext1_reg: ab8500_ext1 {
- regulator-compatible = "ab8500_ext1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -729,7 +709,6 @@
};
ab8500_ext2_reg: ab8500_ext2 {
- regulator-compatible = "ab8500_ext2";
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-boot-on;
@@ -737,7 +716,6 @@
};
ab8500_ext3_reg: ab8500_ext3 {
- regulator-compatible = "ab8500_ext3";
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@@ -750,7 +728,6 @@
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- regulator-compatible = "ab8500_ldo_aux1";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
@@ -760,56 +737,46 @@
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
- regulator-compatible = "ab8500_ldo_aux2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
- regulator-compatible = "ab8500_ldo_aux3";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
- regulator-compatible = "ab8500_ldo_intcore";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
- regulator-compatible = "ab8500_ldo_tvout";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
- regulator-compatible = "ab8500_ldo_usb";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
- regulator-compatible = "ab8500_ldo_audio";
};
// supply for v-anamic1 VAMIC1 LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
- regulator-compatible = "ab8500_ldo_anamic1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
- regulator-compatible = "ab8500_ldo_anamic2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
- regulator-compatible = "ab8500_ldo_dmic";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
- regulator-compatible = "ab8500_ldo_ana";
};
};
};
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 78b7525..c3987ad 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -114,6 +114,8 @@
rohm,touch-max-x = <384>;
rohm,touch-max-y = <704>;
rohm,flip-y;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_rohm_mode>;
};
bu21013_tp@5d {
@@ -124,6 +126,8 @@
rohm,touch-max-x = <384>;
rohm,touch-max-y = <704>;
rohm,flip-y;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_rohm_mode>;
};
};
@@ -166,6 +170,25 @@
};
};
};
+ touch {
+ touch_rohm_mode: touch_rohm {
+ /*
+ * ROHM touch screen uses GPIO 143 for
+ * RST1, GPIO 146 for RST2 and
+ * GPIO 67 for interrupts. Pull-up
+ * the IRQ line and drive both
+ * reset signals low.
+ */
+ stuib_cfg1 {
+ pins = "GPIO143_D12", "GPIO146_D13";
+ ste,config = <&gpio_out_lo>;
+ };
+ stuib_cfg2 {
+ pins = "GPIO67_G2";
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 0e1c969..b7b4211 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -66,7 +66,7 @@
keypad,num-columns = <8>;
keypad,num-rows = <8>;
linux,no-autorepeat;
- linux,wakeup;
+ wakeup-source;
linux,keymap = <0x0301006b
0x04010066
0x06040072
@@ -104,13 +104,40 @@
<19 IRQ_TYPE_EDGE_RISING>;
};
lsm303dlh@1e {
- /* Magnetometer */
+ /*
+ * This magnetometer is packaged with
+ * the accelerometer, and has a DRDY line,
+ * however it is not connected on this
+ * board so it can not generate interrupts.
+ */
compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ lis331dl@1c {
+ /* Accelerometer */
+ compatible = "st,lis331dl-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x1c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
- pinctrl-0 = <&magneto_tvk_mode>;
+ pinctrl-0 = <&accel_tvk_mode>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+ <19 IRQ_TYPE_EDGE_RISING>;
+ };
+ ak8974@0f {
+ /* Magnetometer */
+ compatible = "asahi-kasei,ak8974";
+ reg = <0x0f>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_magn_tvk_mode>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
};
l3g4200d@68 {
/* Gyroscope */
@@ -119,6 +146,10 @@
reg = <0x68>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_magn_tvk_mode>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
};
lsp001wm@5c {
/* Barometer/pressure sensor */
@@ -159,17 +190,22 @@
/* Accelerometer interrupt lines 1 & 2 */
tvk_cfg {
pins = "GPIO82_C1", "GPIO83_D3";
- ste,config = <&gpio_in_pu>;
+ ste,config = <&gpio_in_pd>;
};
};
};
- magnetometer {
- magneto_tvk_mode: magneto_tvk {
- /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+ gyroscope {
+ /*
+ * These lines are shared between Gyroscope l3g400dh
+ * and AK8974 magnetometer.
+ */
+ gyro_magn_tvk_mode: gyro_magn_tvk {
+ /* GPIO 31 used for INT pull down the line */
tvk_cfg1 {
pins = "GPIO31_V3";
- ste,config = <&gpio_in_pu>;
+ ste,config = <&gpio_in_pd>;
};
+ /* GPIO 32 used for DRDY, pull this down */
tvk_cfg2 {
pins = "GPIO32_V2";
ste,config = <&gpio_in_pd>;
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 9c2387b..149a72e 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,7 +43,6 @@
<&vaudio_hf_hrefv60_mode>,
<&gbf_hrefv60_mode>,
<&hdtv_hrefv60_mode>,
- <&touch_hrefv60_mode>,
<&gpios_hrefv60_mode>;
sdi0 {
@@ -190,23 +189,6 @@
};
};
};
- touch {
- touch_hrefv60_mode: touch_hrefv60 {
- /*
- * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
- * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
- * reset signals low.
- */
- hrefv60_cfg1 {
- pins = "GPIO143_D12", "GPIO146_D13";
- ste,config = <&gpio_out_lo>;
- };
- hrefv60_cfg2 {
- pins = "GPIO67_G2";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
mcde {
lcd_hrefv60_mode: lcd_hrefv60 {
/*
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 35282c0..7893290 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -163,7 +163,7 @@
label = "user_button";
gpios = <&gpio0 3 0x1>;
linux,code = <1>; /* KEY_ESC */
- gpio-key,wakeup;
+ wakeup-source;
pinctrl-names = "default";
pinctrl-0 = <&user_button_default_mode>;
};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index e80e421..08f8207 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -281,7 +281,8 @@
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&magneto_snowball_mode>;
- gpios = <&gpio5 5 0x4>; /* DRDY line */
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
};
l3g4200d@68 {
/* Gyroscope */
@@ -292,9 +293,9 @@
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&gyro_snowball_mode>;
- gpios = <&gpio5 6 0x4>; /* DRDY line */
interrupt-parent = <&gpio5>;
- interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+ <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
};
lsp001wm@5c {
/* Barometer/pressure sensor */
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 82a6616..9c73ac2 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -315,21 +315,17 @@
ab3100-regulators {
compatible = "stericsson,ab3100-regulators";
ab3100_ldo_a_reg: ab3100_ldo_a {
- regulator-compatible = "ab3100_ldo_a";
startup-delay-us = <200>;
regulator-always-on;
regulator-boot-on;
};
ab3100_ldo_c_reg: ab3100_ldo_c {
- regulator-compatible = "ab3100_ldo_c";
startup-delay-us = <200>;
};
ab3100_ldo_d_reg: ab3100_ldo_d {
- regulator-compatible = "ab3100_ldo_d";
startup-delay-us = <200>;
};
ab3100_ldo_e_reg: ab3100_ldo_e {
- regulator-compatible = "ab3100_ldo_e";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <200>;
@@ -337,7 +333,6 @@
regulator-boot-on;
};
ab3100_ldo_f_reg: ab3100_ldo_f {
- regulator-compatible = "ab3100_ldo_f";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
startup-delay-us = <600>;
@@ -345,28 +340,23 @@
regulator-boot-on;
};
ab3100_ldo_g_reg: ab3100_ldo_g {
- regulator-compatible = "ab3100_ldo_g";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <2850000>;
startup-delay-us = <400>;
};
ab3100_ldo_h_reg: ab3100_ldo_h {
- regulator-compatible = "ab3100_ldo_h";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2750000>;
startup-delay-us = <200>;
};
ab3100_ldo_k_reg: ab3100_ldo_k {
- regulator-compatible = "ab3100_ldo_k";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2750000>;
startup-delay-us = <200>;
};
ab3100_ext_reg: ab3100_ext {
- regulator-compatible = "ab3100_ext";
};
ab3100_buck_reg: ab3100_buck {
- regulator-compatible = "ab3100_buck";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
startup-delay-us = <1000>;
diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi
deleted file mode 100644
index a632724..0000000
--- a/arch/arm/boot/dts/tps65217.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65217.pdf
- */
-
-&tps {
- compatible = "ti,tps65217";
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dcdc1_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "dcdc1";
- };
-
- dcdc2_reg: regulator@1 {
- reg = <1>;
- regulator-compatible = "dcdc2";
- };
-
- dcdc3_reg: regulator@2 {
- reg = <2>;
- regulator-compatible = "dcdc3";
- };
-
- ldo1_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "ldo1";
- };
-
- ldo2_reg: regulator@4 {
- reg = <4>;
- regulator-compatible = "ldo2";
- };
-
- ldo3_reg: regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo3";
- };
-
- ldo4_reg: regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo4";
- };
- };
-};
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index 3537ae5..5288e6d 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -19,7 +19,7 @@
*/
twl4030_pins: pinmux_twl4030_pins {
pinctrl-single,pins = <
- 0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+ OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
>;
};
};
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa570..e373f59 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
&omap4_pmx_wkup {
twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
pinctrl-single,pins = <
- 0x14 (PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
+ OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2) /* fref_clk0_out.sys_drm_msecure */
>;
};
};
@@ -32,7 +32,7 @@
&omap4_pmx_core {
twl6030_pins: pinmux_twl6030_pins {
pinctrl-single,pins = <
- 0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
+ OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1.sys_nirq1 */
>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
new file mode 100644
index 0000000..ea9301a
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-common32.dtsi
@@ -0,0 +1,135 @@
+/*
+ * Device Tree Source commonly used by UniPhier ARM SoCs
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&intc>;
+
+ extbus: extbus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+ clocks = <&uart_clk>;
+ };
+
+ serial1: serial@54006900 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x40>;
+ interrupts = <0 35 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ clocks = <&uart_clk>;
+ };
+
+ serial2: serial@54006a00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x40>;
+ interrupts = <0 37 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&uart_clk>;
+ };
+
+ serial3: serial@54006b00 {
+ compatible = "socionext,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006b00 0x40>;
+ interrupts = <0 177 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ clocks = <&uart_clk>;
+ };
+
+ system-bus-controller@58c00000 {
+ compatible = "socionext,uniphier-system-bus-controller";
+ reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
+ };
+
+ timer@60000200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x60000200 0x20>;
+ interrupts = <1 11 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ timer@60000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x60000600 0x20>;
+ interrupts = <1 13 0x104>;
+ clocks = <&arm_timer_clk>;
+ };
+
+ intc: interrupt-controller@60001000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x60001000 0x1000>,
+ <0x60000100 0x100>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+
+ pinctrl: pinctrl@5f801000 {
+ /* specify compatible in each SoC DTSI */
+ reg = <0x5f801000 0xe00>;
+ };
+ };
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index af49381..34f0d8d 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-ld4";
@@ -78,188 +78,105 @@
clock-frequency = <100000000>;
};
};
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
-
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
-
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(512 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
-
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <400000>;
- };
-
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 80 4>;
- };
-
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 81 4>;
- };
-
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 82 4>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-ld4-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
- };
};
-/include/ "uniphier-pinctrl.dtsi"
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(512 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
+
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
+
+};
+
+&serial3 {
+ interrupts = <0 29 4>;
+};
+
+&pinctrl {
+ compatible = "socionext,ph1-ld4-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index 254642f..d78142f 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-pro4";
@@ -86,203 +86,115 @@
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(768 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(768 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ /* i2c4 does not exist */
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
+ usb2: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ };
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- /* i2c4 does not exist */
-
- /* chip-internal connection for DMD */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- usb2: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 80 4>;
- };
-
- usb3: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb3>;
- interrupts = <0 81 4>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-pro4-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ usb3: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-pro4-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
index 11eb762..2f389ea 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-pro5";
@@ -86,193 +86,109 @@
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+ interrupts = <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ next-level-cache = <&l3>;
+ };
+
+ l3: l3-cache@500c8000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(2 * 1024 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <256>;
+ cache-level = <3>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
- <0x506c0000 0x400>;
- interrupts = <0 190 4>, <0 191 4>;
- cache-unified;
- cache-size = <(2 * 1024 * 1024)>;
- cache-sets = <512>;
- cache-line-size = <128>;
- cache-level = <2>;
- next-level-cache = <&l3>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l3: l3-cache@500c8000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
- <0x506c8000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(2 * 1024 * 1024)>;
- cache-sets = <512>;
- cache-line-size = <256>;
- cache-level = <3>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- };
+ /* i2c4 does not exist */
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- };
+ /* chip-internal connection for DMD */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- };
-
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 177 4>;
- clocks = <&uart_clk>;
- };
-
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- /* i2c4 does not exist */
-
- /* chip-internal connection for DMD */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-pro5-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x304>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index e88559b..7d06a1c 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,ph1-sld8";
@@ -78,188 +78,104 @@
clock-frequency = <100000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>;
+ cache-unified;
+ cache-size = <(256 * 1024)>;
+ cache-sets = <256>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58400000 0x40>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58480000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58480000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>;
- cache-unified;
- cache-size = <(256 * 1024)>;
- cache-sets = <256>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
+ /* chip-internal connection for DMD */
+ i2c2: i2c@58500000 {
+ compatible = "socionext,uniphier-i2c";
+ reg = <0x58500000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 43 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <400000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ i2c3: i2c@58580000 {
+ compatible = "socionext,uniphier-i2c";
+ status = "disabled";
+ reg = <0x58580000 0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&iobus_clk>;
+ clock-frequency = <100000>;
+ };
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ usb0: usb@5a800100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ interrupts = <0 80 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ };
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
+ usb1: usb@5a810100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ interrupts = <0 81 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 29 4>;
- clocks = <&uart_clk>;
- fifo-size = <64>;
- };
-
- i2c0: i2c@58400000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58400000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58480000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58480000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c2: i2c@58500000 {
- compatible = "socionext,uniphier-i2c";
- reg = <0x58500000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <400000>;
- };
-
- i2c3: i2c@58580000 {
- compatible = "socionext,uniphier-i2c";
- status = "disabled";
- reg = <0x58580000 0x40>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 1>;
- clocks = <&iobus_clk>;
- clock-frequency = <100000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- usb0: usb@5a800100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a800100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb0>;
- interrupts = <0 80 4>;
- };
-
- usb1: usb@5a810100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a810100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb1>;
- interrupts = <0 81 4>;
- };
-
- usb2: usb@5a820100 {
- compatible = "socionext,uniphier-ehci", "generic-ehci";
- status = "disabled";
- reg = <0x5a820100 0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb2>;
- interrupts = <0 82 4>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,ph1-sld8-pinctrl",
- "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0x104>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ usb2: usb@5a820100 {
+ compatible = "socionext,uniphier-ehci", "generic-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ interrupts = <0 82 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&serial3 {
+ interrupts = <0 29 4>;
+};
+
+&pinctrl {
+ compatible = "socionext,ph1-sld8-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
index 259f1a9..6bd353f 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -42,7 +42,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
/ {
compatible = "socionext,proxstream2";
@@ -100,189 +100,106 @@
clock-frequency = <50000000>;
};
};
+};
- soc {
- compatible = "simple-bus";
+&soc {
+ l2: l2-cache@500c0000 {
+ compatible = "socionext,uniphier-system-cache";
+ reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+ interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+ cache-unified;
+ cache-size = <(1280 * 1024)>;
+ cache-sets = <512>;
+ cache-line-size = <128>;
+ cache-level = <2>;
+ };
+
+ i2c0: i2c@58780000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58780000 0x80>;
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-parent = <&intc>;
+ #size-cells = <0>;
+ interrupts = <0 41 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- extbus: extbus {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- };
+ i2c1: i2c@58781000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58781000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 42 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- l2: l2-cache@500c0000 {
- compatible = "socionext,uniphier-system-cache";
- reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
- <0x506c0000 0x400>;
- interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
- cache-unified;
- cache-size = <(1280 * 1024)>;
- cache-sets = <512>;
- cache-line-size = <128>;
- cache-level = <2>;
- };
+ i2c2: i2c@58782000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58782000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ interrupts = <0 43 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial0: serial@54006800 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006800 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
- interrupts = <0 33 4>;
- clocks = <&uart_clk>;
- };
+ i2c3: i2c@58783000 {
+ compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
+ reg = <0x58783000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 44 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <100000>;
+ };
- serial1: serial@54006900 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006900 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- interrupts = <0 35 4>;
- clocks = <&uart_clk>;
- };
+ /* chip-internal connection for DMD */
+ i2c4: i2c@58784000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58784000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 45 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial2: serial@54006a00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006a00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- interrupts = <0 37 4>;
- clocks = <&uart_clk>;
- };
+ /* chip-internal connection for STM */
+ i2c5: i2c@58785000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58785000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 25 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
+ };
- serial3: serial@54006b00 {
- compatible = "socionext,uniphier-uart";
- status = "disabled";
- reg = <0x54006b00 0x40>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- interrupts = <0 177 4>;
- clocks = <&uart_clk>;
- };
-
- i2c0: i2c@58780000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58780000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0>;
- interrupts = <0 41 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c1: i2c@58781000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58781000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- interrupts = <0 42 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c2: i2c@58782000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58782000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- interrupts = <0 43 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- i2c3: i2c@58783000 {
- compatible = "socionext,uniphier-fi2c";
- status = "disabled";
- reg = <0x58783000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- interrupts = <0 44 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <100000>;
- };
-
- /* chip-internal connection for DMD */
- i2c4: i2c@58784000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58784000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 45 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for STM */
- i2c5: i2c@58785000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58785000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 25 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- /* chip-internal connection for HDMI */
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
- system-bus-controller@58c00000 {
- compatible = "socionext,uniphier-system-bus-controller";
- reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
- };
-
- pinctrl: pinctrl@5f801000 {
- compatible = "socionext,proxstream2-pinctrl", "syscon";
- reg = <0x5f801000 0xe00>;
- };
-
- timer@60000200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x60000200 0x20>;
- interrupts = <1 11 0xf04>;
- clocks = <&arm_timer_clk>;
- };
-
- timer@60000600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x60000600 0x20>;
- interrupts = <1 13 0xf04>;
- clocks = <&arm_timer_clk>;
- };
-
- intc: interrupt-controller@60001000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x60001000 0x1000>,
- <0x60000100 0x100>;
- };
+ /* chip-internal connection for HDMI */
+ i2c6: i2c@58786000 {
+ compatible = "socionext,uniphier-fi2c";
+ reg = <0x58786000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 26 4>;
+ clocks = <&i2c_clk>;
+ clock-frequency = <400000>;
};
};
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+ compatible = "socionext,proxstream2-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 12edafe..9beea89 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -115,7 +115,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 68c0de3..8cc6edb 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -143,7 +143,7 @@
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index e5949b9..6e556be 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -23,6 +23,18 @@
status = "okay";
};
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan0>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
&dspi1 {
bus-num = <1>;
pinctrl-names = "default";
@@ -125,6 +137,20 @@
&iomuxc {
vf610-colibri {
+ pinctrl_flexcan0: can0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__CAN0_RX 0x31F1
+ VF610_PAD_PTB15__CAN0_TX 0x31F2
+ >;
+ };
+
+ pinctrl_flexcan1: can1grp {
+ fsl,pins = <
+ VF610_PAD_PTB16__CAN1_RX 0x31F1
+ VF610_PAD_PTB17__CAN1_TX 0x31F2
+ >;
+ };
+
pinctrl_gpio_ext: gpio_ext {
fsl,pins = <
VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 19fe045..2d7eab7 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -18,8 +18,3 @@
reg = <0x80000000 0x10000000>;
};
};
-
-&L2 {
- arm,data-latency = <2 1 2>;
- arm,tag-latency = <3 2 3>;
-};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 5f8eb1b..58bc6e4 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -19,7 +19,7 @@
reg = <0x40006000 0x1000>;
cache-unified;
cache-level = <2>;
- arm,data-latency = <1 1 1>;
+ arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
};
};
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts
new file mode 100644
index 0000000..8944a2d
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+ model = "VF610 Cortex-M4";
+ compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+ status = "disabled";
+};
+
+&gpio1 {
+ status = "disabled";
+};
+
+&gpio2 {
+ status = "disabled";
+};
+
+&gpio3 {
+ status = "disabled";
+};
+
+&gpio4 {
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-cosmic {
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ VF610_PAD_PTA20__UART3_TX 0x21a2
+ VF610_PAD_PTA21__UART3_RX 0x21a1
+ >;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 6736bae..a9ceb5b 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -158,7 +158,7 @@
interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
- spi-num-chipselects = <5>;
+ spi-num-chipselects = <6>;
status = "disabled";
};
@@ -170,7 +170,7 @@
interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI1>;
clock-names = "dspi";
- spi-num-chipselects = <5>;
+ spi-num-chipselects = <4>;
status = "disabled";
};
@@ -178,8 +178,10 @@
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_SAI2>;
- clock-names = "sai";
+ clocks = <&clks VF610_CLK_SAI2>,
+ <&clks VF610_CLK_SAI2_DIV>,
+ <&clks 0>, <&clks 0>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 21>,
<&edma0 0 20>;
@@ -453,6 +455,30 @@
status = "disabled";
};
+ dspi2: dspi2@400ac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ac000 0x1000>;
+ interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI2>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ status = "disabled";
+ };
+
+ dspi3: dspi3@400ad000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x400ad000 0x1000>;
+ interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI3>;
+ clock-names = "dspi";
+ spi-num-chipselects = <2>;
+ status = "disabled";
+ };
+
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
@@ -461,6 +487,8 @@
clock-names = "adc";
#io-channel-cells = <1>;
status = "disabled";
+ fsl,adck-max-frequency = <30000000>, <40000000>,
+ <20000000>;
};
esdhc0: esdhc@400b1000 {
@@ -472,8 +500,6 @@
<&clks VF610_CLK_ESDHC0>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
- fsl,adck-max-frequency = <30000000>, <40000000>,
- <20000000>;
};
esdhc1: esdhc@400b2000 {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 1a5220e..f283ff0 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -19,7 +19,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
@@ -33,7 +33,7 @@
>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
@@ -101,6 +101,8 @@
#gpio-cells = <2>;
clocks = <&clkc 42>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <0 20 4>;
reg = <0xe000a000 0x1000>;
@@ -238,7 +240,7 @@
slcr: slcr@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+ compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 5df8f81..cb64209 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -43,14 +43,14 @@
label = "sw14";
gpios = <&gpio0 12 0>;
linux,code = <108>; /* down */
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
sw13 {
label = "sw13";
gpios = <&gpio0 14 0>;
linux,code = <103>; /* up */
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 1b1e5ac..e4b1be6 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -125,7 +125,6 @@
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index a0c57ac..63f7e6c 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -129,7 +129,6 @@
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
# CONFIG_HWMON is not set
-CONFIG_SSB=m
CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index be1d07d..1bd9510de 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -40,6 +40,11 @@
#define arch_trigger_all_cpu_backtrace(x) arch_trigger_all_cpu_backtrace(x)
#endif
+static inline int nr_legacy_irqs(void)
+{
+ return NR_IRQS_LEGACY;
+}
+
#endif
#endif
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 7a2a32a1..ede692f 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -416,6 +416,7 @@
#define __NR_execveat (__NR_SYSCALL_BASE+387)
#define __NR_userfaultfd (__NR_SYSCALL_BASE+388)
#define __NR_membarrier (__NR_SYSCALL_BASE+389)
+#define __NR_mlock2 (__NR_SYSCALL_BASE+390)
/*
* The following SWIs are ARM private.
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 6551d28..066f7f9 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -17,11 +17,6 @@
#include <asm/mach/pci.h>
static int debug_pci;
-static resource_size_t (*align_resource)(struct pci_dev *dev,
- const struct resource *res,
- resource_size_t start,
- resource_size_t size,
- resource_size_t align) = NULL;
/*
* We can't use pci_get_device() here since we are
@@ -461,7 +456,6 @@
sys->busnr = busnr;
sys->swizzle = hw->swizzle;
sys->map_irq = hw->map_irq;
- align_resource = hw->align_resource;
INIT_LIST_HEAD(&sys->resources);
if (hw->private_data)
@@ -470,6 +464,8 @@
ret = hw->setup(nr, sys);
if (ret > 0) {
+ struct pci_host_bridge *host_bridge;
+
ret = pcibios_init_resources(nr, sys);
if (ret) {
kfree(sys);
@@ -491,6 +487,9 @@
busnr = sys->bus->busn_res.end + 1;
list_add(&sys->node, head);
+
+ host_bridge = pci_find_host_bridge(sys->bus);
+ host_bridge->align_resource = hw->align_resource;
} else {
kfree(sys);
if (ret < 0)
@@ -578,14 +577,18 @@
{
struct pci_dev *dev = data;
resource_size_t start = res->start;
+ struct pci_host_bridge *host_bridge;
if (res->flags & IORESOURCE_IO && start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
start = (start + align - 1) & ~(align - 1);
- if (align_resource)
- return align_resource(dev, res, start, size, align);
+ host_bridge = pci_find_host_bridge(dev->bus);
+
+ if (host_bridge->align_resource)
+ return host_bridge->align_resource(dev, res,
+ start, size, align);
return start;
}
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index fde6c88..ac368bb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -399,6 +399,7 @@
CALL(sys_execveat)
CALL(sys_userfaultfd)
CALL(sys_membarrier)
+ CALL(sys_mlock2)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index eab83b2..e06fd29 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -564,17 +564,12 @@
vcpu_sleep(vcpu);
/*
- * Disarming the background timer must be done in a
- * preemptible context, as this call may sleep.
- */
- kvm_timer_flush_hwstate(vcpu);
-
- /*
* Preparing the interrupts to be injected also
* involves poking the GIC, which must be done in a
* non-preemptible context.
*/
preempt_disable();
+ kvm_timer_flush_hwstate(vcpu);
kvm_vgic_flush_hwstate(vcpu);
local_irq_disable();
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 6984342..7dace90 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -98,6 +98,11 @@
__kvm_flush_dcache_pud(pud);
}
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+ return !pfn_valid(pfn);
+}
+
/**
* stage2_dissolve_pmd() - clear and flush huge PMD entry
* @kvm: pointer to kvm structure.
@@ -213,7 +218,7 @@
kvm_tlb_flush_vmid_ipa(kvm, addr);
/* No need to invalidate the cache for device mappings */
- if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+ if (!kvm_is_device_pfn(__phys_to_pfn(addr)))
kvm_flush_dcache_pte(old_pte);
put_page(virt_to_page(pte));
@@ -305,8 +310,7 @@
pte = pte_offset_kernel(pmd, addr);
do {
- if (!pte_none(*pte) &&
- (pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+ if (!pte_none(*pte) && !kvm_is_device_pfn(__phys_to_pfn(addr)))
kvm_flush_dcache_pte(*pte);
} while (pte++, addr += PAGE_SIZE, addr != end);
}
@@ -1037,11 +1041,6 @@
return kvm_vcpu_dabt_iswrite(vcpu);
}
-static bool kvm_is_device_pfn(unsigned long pfn)
-{
- return !pfn_valid(pfn);
-}
-
/**
* stage2_wp_ptes - write protect PMD range
* @pmd: pointer to pmd entry
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
index 72d622ba..df1d44b 100644
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -18,13 +18,13 @@
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
+ mov \irqnr, #32
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- moveq \irqnr, #63
+ moveq \irqnr, #64
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 8e7976a..cfc696b 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -177,6 +177,7 @@
.irq_unmask = imx_gpc_irq_unmask,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_wake = imx_gpc_irq_set_wake,
+ .irq_set_type = irq_chip_set_type_parent,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index d019a08..2f9f09a 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -44,6 +44,7 @@
};
static const char * const mediatek_board_dt_compat[] = {
+ "mediatek,mt2701",
"mediatek,mt6589",
"mediatek,mt6592",
"mediatek,mt8127",
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 5305ec7..79e1f87 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -143,9 +143,9 @@
* Ensure that CPU power state is set to ON to avoid CPU
* powerdomain transition on wfi
*/
- clkdm_wakeup(cpu1_clkdm);
- omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
- clkdm_allow_idle(cpu1_clkdm);
+ clkdm_wakeup_nolock(cpu1_clkdm);
+ pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
+ clkdm_allow_idle_nolock(cpu1_clkdm);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
while (gic_dist_disabled()) {
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index cc8a9871..48495ad 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -890,6 +890,36 @@
return ret;
}
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int i;
+
+ pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk) {
+ pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+ __clk_get_name(oc->_clk));
+ clk_enable(oc->_clk);
+ }
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int i;
+
+ pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk) {
+ pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+ __clk_get_name(oc->_clk));
+ clk_disable(oc->_clk);
+ }
+}
+
/**
* _enable_clocks - enable hwmod main clock and interface clocks
* @oh: struct omap_hwmod *
@@ -917,6 +947,9 @@
clk_enable(os->_clk);
}
+ if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+ _enable_optional_clocks(oh);
+
/* The opt clocks are controlled by the device driver. */
return 0;
@@ -948,41 +981,14 @@
clk_disable(os->_clk);
}
+ if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+ _disable_optional_clocks(oh);
+
/* The opt clocks are controlled by the device driver. */
return 0;
}
-static void _enable_optional_clocks(struct omap_hwmod *oh)
-{
- struct omap_hwmod_opt_clk *oc;
- int i;
-
- pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
-
- for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
- if (oc->_clk) {
- pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
- __clk_get_name(oc->_clk));
- clk_enable(oc->_clk);
- }
-}
-
-static void _disable_optional_clocks(struct omap_hwmod *oh)
-{
- struct omap_hwmod_opt_clk *oc;
- int i;
-
- pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
-
- for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
- if (oc->_clk) {
- pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
- __clk_get_name(oc->_clk));
- clk_disable(oc->_clk);
- }
-}
-
/**
* _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
* @oh: struct omap_hwmod *
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index ca6df1a..76bce11 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -523,6 +523,8 @@
* HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up
* events by calling _reconfigure_io_chain() when a device is enabled
* or idled.
+ * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
+ * operate and they need to be handled at the same time as the main_clk.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -538,6 +540,7 @@
#define HWMOD_FORCE_MSTANDBY (1 << 11)
#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
+#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
/*
* omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 51d1ecb..ee4e044 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1298,6 +1298,44 @@
};
/*
+ * 'mcasp' class
+ *
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
+ .sysc_offs = 0x0004,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
+ .name = "mcasp",
+ .sysc = &dra7xx_mcasp_sysc,
+};
+
+/* mcasp3 */
+static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
+ { .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp3_hwmod = {
+ .name = "mcasp3",
+ .class = &dra7xx_mcasp_hwmod_class,
+ .clkdm_name = "l4per2_clkdm",
+ .main_clk = "mcasp3_aux_gfclk_mux",
+ .flags = HWMOD_OPT_CLKS_NEEDED,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .opt_clks = mcasp3_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(mcasp3_opt_clks),
+};
+
+/*
* 'mmc' class
*
*/
@@ -2566,6 +2604,22 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per2 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_mcasp3_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
+ .master = &dra7xx_l3_main_1_hwmod,
+ .slave = &dra7xx_mcasp3_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_per1 -> elm */
static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
.master = &dra7xx_l4_per1_hwmod,
@@ -3308,6 +3362,8 @@
&dra7xx_l4_wkup__dcan1,
&dra7xx_l4_per2__dcan2,
&dra7xx_l4_per2__cpgmac0,
+ &dra7xx_l4_per2__mcasp3,
+ &dra7xx_l3_main_1__mcasp3,
&dra7xx_gmac__mdio,
&dra7xx_l4_cfg__dma_system,
&dra7xx_l3_main_1__dss,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index b1288f5..6256052 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -144,6 +144,7 @@
.name = "l4_ls",
.clkdm_name = "alwon_l3s_clkdm",
.class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
/*
@@ -155,6 +156,7 @@
.name = "l4_hs",
.clkdm_name = "alwon_l3_med_clkdm",
.class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
/* L3 slow -> L4 ls peripheral interface running at 125MHz */
@@ -850,6 +852,7 @@
.name = "emac0",
.clkdm_name = "alwon_ethernet_clkdm",
.class = &dm816x_emac_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = {
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 1dfe346..62269a3 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -24,9 +24,6 @@
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
@@ -153,6 +150,21 @@
}
};
+static struct ti_st_plat_data wilink7_pdata = {
+ .nshutdown_gpio = 162,
+ .dev_name = "/dev/ttyO1",
+ .flow_cntrl = 1,
+ .baud_rate = 300000,
+};
+
+static struct platform_device wl128x_device = {
+ .name = "kim",
+ .id = -1,
+ .dev = {
+ .platform_data = &wilink7_pdata,
+ }
+};
+
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
@@ -279,6 +291,13 @@
hsmmc2_internal_input_clk();
}
+static void __init omap3_logicpd_torpedo_init(void)
+{
+ omap3_gpio126_127_129();
+ platform_device_register(&wl128x_device);
+ platform_device_register(&btwilink_device);
+}
+
/* omap3pandora legacy devices */
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
@@ -385,29 +404,6 @@
}
#endif /* CONFIG_ARCH_OMAP3 */
-#ifdef CONFIG_SOC_TI81XX
-static int fault_fixed_up;
-
-static int t410_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
- pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
- addr, fsr);
- fault_fixed_up = 1;
- return 0;
- }
-
- return 1;
-}
-
-static void __init t410_abort_init(void)
-{
- hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
- "imprecise external abort");
-}
-#endif
-
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
@@ -529,16 +525,13 @@
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
- { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
+ { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
#endif
-#ifdef CONFIG_SOC_TI81XX
- { "hp,t410", t410_abort_init, },
-#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 87b98bf9..2dbd378 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -301,11 +301,11 @@
if (omap_irq_pending())
return;
- trace_cpu_idle(1, smp_processor_id());
+ trace_cpu_idle_rcuidle(1, smp_processor_id());
omap_sram_idle();
- trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index 79eb502..73919a3 100644
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -21,5 +21,5 @@
@ find cause bits that are unmasked
ands \irqstat, \irqstat, \tmp @ clear Z flag if any
clzne \irqnr, \irqstat @ calc irqnr
- rsbne \irqnr, \irqnr, #31
+ rsbne \irqnr, \irqnr, #32
.endm
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 13eba2b..8fbfb10 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -344,7 +344,7 @@
{
palm_bl_power = bl;
palm_lcd_power = lcd;
- pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
+ pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
platform_device_register(&palm27x_backlight);
}
#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index aebf6de..0b5c387 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -169,7 +169,7 @@
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct pwm_lookup palmtc_pwm_lookup[] = {
PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
- PWM_PERIOD_NORMAL),
+ PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data palmtc_backlight_data = {
diff --git a/arch/arm/mach-shmobile/setup-r8a7793.c b/arch/arm/mach-shmobile/setup-r8a7793.c
index 1d2825c..5fce87f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7793.c
+++ b/arch/arm/mach-shmobile/setup-r8a7793.c
@@ -19,7 +19,7 @@
#include "common.h"
#include "rcar-gen2.h"
-static const char *r8a7793_boards_compat_dt[] __initconst = {
+static const char * const r8a7793_boards_compat_dt[] __initconst = {
"renesas,r8a7793",
NULL,
};
diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig
index 7fdc5bf..446334a 100644
--- a/arch/arm/mach-zx/Kconfig
+++ b/arch/arm/mach-zx/Kconfig
@@ -13,7 +13,7 @@
select ARM_GLOBAL_TIMER
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS if PM
help
Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
endif
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 2f4b14c..591f9db 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -1061,7 +1061,7 @@
}
build_epilogue(&ctx);
- flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
+ flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx));
#if __LINUX_ARM_ARCH__ < 7
if (ctx.imm_count)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 9ac16a4..871f217 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -49,7 +49,7 @@
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_BITREVERSE
select HAVE_ARCH_JUMP_LABEL
- select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP
+ select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
@@ -316,6 +316,27 @@
If unsure, say Y.
+config ARM64_ERRATUM_834220
+ bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+ depends on KVM
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 834220 on Cortex-A57 parts up to r1p2.
+
+ Affected Cortex-A57 parts might report a Stage 2 translation
+ fault as the result of a Stage 1 fault for load crossing a
+ page boundary when there is a permission or device memory
+ alignment fault at Stage 1 and a translation fault at Stage 2.
+
+ The workaround is to verify that the Stage 1 translation
+ doesn't generate a fault before handling the Stage 2 fault.
+ Please note that this does not necessarily enable the workaround,
+ as it depends on the alternative framework, which will only patch
+ the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
config ARM64_ERRATUM_845719
bool "Cortex-A53: 845719: a load might read incorrect data"
depends on COMPAT
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4dd5f93..fd71a87 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -15,7 +15,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/mt8173-power.h>
-#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/reset/mt8173-resets.h>
#include "mt8173-pinfunc.h"
/ {
diff --git a/arch/arm64/crypto/aes-ce-cipher.c b/arch/arm64/crypto/aes-ce-cipher.c
index ce47792..f7bd9bf 100644
--- a/arch/arm64/crypto/aes-ce-cipher.c
+++ b/arch/arm64/crypto/aes-ce-cipher.c
@@ -237,7 +237,7 @@
static struct crypto_alg aes_alg = {
.cra_name = "aes",
.cra_driver_name = "aes-ce",
- .cra_priority = 300,
+ .cra_priority = 250,
.cra_flags = CRYPTO_ALG_TYPE_CIPHER,
.cra_blocksize = AES_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct crypto_aes_ctx),
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index 624f967..9622eb4 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -64,27 +64,31 @@
#define smp_load_acquire(p) \
({ \
- typeof(*p) ___p1; \
+ union { typeof(*p) __val; char __c[1]; } __u; \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
case 1: \
asm volatile ("ldarb %w0, %1" \
- : "=r" (___p1) : "Q" (*p) : "memory"); \
+ : "=r" (*(__u8 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
break; \
case 2: \
asm volatile ("ldarh %w0, %1" \
- : "=r" (___p1) : "Q" (*p) : "memory"); \
+ : "=r" (*(__u16 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
break; \
case 4: \
asm volatile ("ldar %w0, %1" \
- : "=r" (___p1) : "Q" (*p) : "memory"); \
+ : "=r" (*(__u32 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
break; \
case 8: \
asm volatile ("ldar %0, %1" \
- : "=r" (___p1) : "Q" (*p) : "memory"); \
+ : "=r" (*(__u64 *)__u.__c) \
+ : "Q" (*p) : "memory"); \
break; \
} \
- ___p1; \
+ __u.__val; \
})
#define read_barrier_depends() do { } while(0)
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index 7fbed69..eb8432b 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -23,7 +23,6 @@
*/
#include <linux/types.h>
#include <linux/sched.h>
-#include <linux/ptrace.h>
#define COMPAT_USER_HZ 100
#ifdef __AARCH64EB__
@@ -234,7 +233,7 @@
return (u32)(unsigned long)uptr;
}
-#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs()))
+#define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
static inline void __user *arch_compat_alloc_user_space(long len)
{
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 11d5bb0f..8f271b8 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -29,8 +29,9 @@
#define ARM64_HAS_PAN 4
#define ARM64_HAS_LSE_ATOMICS 5
#define ARM64_WORKAROUND_CAVIUM_23154 6
+#define ARM64_WORKAROUND_834220 7
-#define ARM64_NCAPS 7
+#define ARM64_NCAPS 8
#ifndef __ASSEMBLY__
@@ -46,8 +47,12 @@
#define FTR_STRICT true /* SANITY check strict matching required */
#define FTR_NONSTRICT false /* SANITY check ignored */
+#define FTR_SIGNED true /* Value should be treated as signed */
+#define FTR_UNSIGNED false /* Value should be treated as unsigned */
+
struct arm64_ftr_bits {
- bool strict; /* CPU Sanity check: strict matching required ? */
+ bool sign; /* Value is signed ? */
+ bool strict; /* CPU Sanity check: strict matching required ? */
enum ftr_type type;
u8 shift;
u8 width;
@@ -123,6 +128,18 @@
return cpuid_feature_extract_field_width(features, field, 4);
}
+static inline unsigned int __attribute_const__
+cpuid_feature_extract_unsigned_field_width(u64 features, int field, int width)
+{
+ return (u64)(features << (64 - width - field)) >> (64 - width);
+}
+
+static inline unsigned int __attribute_const__
+cpuid_feature_extract_unsigned_field(u64 features, int field)
+{
+ return cpuid_feature_extract_unsigned_field_width(features, field, 4);
+}
+
static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
{
return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
@@ -130,7 +147,9 @@
static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val)
{
- return cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width);
+ return ftrp->sign ?
+ cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width) :
+ cpuid_feature_extract_unsigned_field_width(val, ftrp->shift, ftrp->width);
}
static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h
index 54d0ead..61e08f3 100644
--- a/arch/arm64/include/asm/dma-mapping.h
+++ b/arch/arm64/include/asm/dma-mapping.h
@@ -18,7 +18,6 @@
#ifdef __KERNEL__
-#include <linux/acpi.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
@@ -26,22 +25,16 @@
#include <asm/xen/hypervisor.h>
#define DMA_ERROR_CODE (~(dma_addr_t)0)
-extern struct dma_map_ops *dma_ops;
extern struct dma_map_ops dummy_dma_ops;
static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
{
- if (unlikely(!dev))
- return dma_ops;
- else if (dev->archdata.dma_ops)
+ if (dev && dev->archdata.dma_ops)
return dev->archdata.dma_ops;
- else if (acpi_disabled)
- return dma_ops;
/*
- * When ACPI is enabled, if arch_set_dma_ops is not called,
- * we will disable device DMA capability by setting it
- * to dummy_dma_ops.
+ * We expect no ISA devices, and all other DMA masters are expected to
+ * have someone call arch_setup_dma_ops at device creation time.
*/
return &dummy_dma_ops;
}
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
index e54415e..9732908 100644
--- a/arch/arm64/include/asm/hw_breakpoint.h
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -138,16 +138,18 @@
/* Determine number of BRP registers available. */
static inline int get_num_brps(void)
{
+ u64 dfr0 = read_system_reg(SYS_ID_AA64DFR0_EL1);
return 1 +
- cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+ cpuid_feature_extract_unsigned_field(dfr0,
ID_AA64DFR0_BRPS_SHIFT);
}
/* Determine number of WRP registers available. */
static inline int get_num_wrps(void)
{
+ u64 dfr0 = read_system_reg(SYS_ID_AA64DFR0_EL1);
return 1 +
- cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+ cpuid_feature_extract_unsigned_field(dfr0,
ID_AA64DFR0_WRPS_SHIFT);
}
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index 23eb450..8e8d306 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -7,4 +7,9 @@
extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
+static inline int nr_legacy_irqs(void)
+{
+ return 0;
+}
+
#endif
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 17e92f0..3ca894e 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -99,11 +99,13 @@
*vcpu_cpsr(vcpu) |= COMPAT_PSR_T_BIT;
}
+/*
+ * vcpu_reg should always be passed a register number coming from a
+ * read of ESR_EL2. Otherwise, it may give the wrong result on AArch32
+ * with banked registers.
+ */
static inline unsigned long *vcpu_reg(const struct kvm_vcpu *vcpu, u8 reg_num)
{
- if (vcpu_mode_is_32bit(vcpu))
- return vcpu_reg32(vcpu, reg_num);
-
return (unsigned long *)&vcpu_gp_regs(vcpu)->regs.regs[reg_num];
}
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index c0e8789..2416578 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -101,7 +101,7 @@
#define destroy_context(mm) do { } while(0)
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
-#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
+#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; })
/*
* This is called when "tsk" is about to enter lazy TLB mode.
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 9819a94..7e074f9 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -81,6 +81,7 @@
#define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
#define PAGE_KERNEL_RO __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
+#define PAGE_KERNEL_ROX __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
#define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
#define PAGE_KERNEL_EXEC_CONT __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 24926f2..feb6b4e 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -75,6 +75,15 @@
(1 << MIDR_VARIANT_SHIFT) | 2),
},
#endif
+#ifdef CONFIG_ARM64_ERRATUM_834220
+ {
+ /* Cortex-A57 r0p0 - r1p2 */
+ .desc = "ARM erratum 834220",
+ .capability = ARM64_WORKAROUND_834220,
+ MIDR_RANGE(MIDR_CORTEX_A57, 0x00,
+ (1 << MIDR_VARIANT_SHIFT) | 2),
+ },
+#endif
#ifdef CONFIG_ARM64_ERRATUM_845719
{
/* Cortex-A53 r0p[01234] */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index c8cf892..0669c63 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -44,8 +44,9 @@
DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
-#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+#define __ARM64_FTR_BITS(SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
{ \
+ .sign = SIGNED, \
.strict = STRICT, \
.type = TYPE, \
.shift = SHIFT, \
@@ -53,6 +54,14 @@
.safe_val = SAFE_VAL, \
}
+/* Define a feature with signed values */
+#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+ __ARM64_FTR_BITS(FTR_SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
+
+/* Define a feature with unsigned value */
+#define U_ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+ __ARM64_FTR_BITS(FTR_UNSIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
+
#define ARM64_FTR_END \
{ \
.width = 0, \
@@ -99,7 +108,7 @@
* Differing PARange is fine as long as all peripherals and memory are mapped
* within the minimum PARange of all CPUs
*/
- ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_PARANGE_SHIFT, 4, 0),
+ U_ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_PARANGE_SHIFT, 4, 0),
ARM64_FTR_END,
};
@@ -115,18 +124,18 @@
};
static struct arm64_ftr_bits ftr_ctr[] = {
- ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 3, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */
- ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), /* ERG */
- ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), /* ERG */
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */
/*
* Linux can handle differing I-cache policies. Userspace JITs will
* make use of *minLine
*/
- ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0), /* L1Ip */
+ U_ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0), /* L1Ip */
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 10, 0), /* RAZ */
- ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* IminLine */
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* IminLine */
ARM64_FTR_END,
};
@@ -144,12 +153,12 @@
static struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
- ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0),
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
+ U_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
ARM64_FTR_END,
};
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 706679d..212ae63 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -30,6 +30,7 @@
#include <linux/seq_file.h>
#include <linux/sched.h>
#include <linux/smp.h>
+#include <linux/delay.h>
/*
* In case the boot CPU is hotpluggable, we record its initial state and
@@ -112,6 +113,10 @@
*/
seq_printf(m, "processor\t: %d\n", i);
+ seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+ loops_per_jiffy / (500000UL/HZ),
+ loops_per_jiffy / (5000UL/HZ) % 100);
+
/*
* Dump out the common processor features in a single line.
* Userspace should read the hwcaps with getauxval(AT_HWCAP)
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index de46b50..4eeb171 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -127,7 +127,11 @@
table_size = sizeof(efi_config_table_64_t) * efi.systab->nr_tables;
config_tables = early_memremap(efi_to_phys(efi.systab->tables),
table_size);
-
+ if (config_tables == NULL) {
+ pr_warn("Unable to map EFI config table array.\n");
+ retval = -ENOMEM;
+ goto out;
+ }
retval = efi_config_parse_tables(config_tables, efi.systab->nr_tables,
sizeof(efi_config_table_64_t), NULL);
@@ -209,6 +213,14 @@
PAGE_ALIGN(params.mmap_size + (params.mmap & ~PAGE_MASK)));
memmap.phys_map = params.mmap;
memmap.map = early_memremap(params.mmap, params.mmap_size);
+ if (memmap.map == NULL) {
+ /*
+ * If we are booting via UEFI, the UEFI memory map is the only
+ * description of memory we have, so there is little point in
+ * proceeding if we cannot access it.
+ */
+ panic("Unable to map EFI memory map.\n");
+ }
memmap.map_end = memmap.map + params.mmap_size;
memmap.desc_size = params.desc_size;
memmap.desc_version = params.desc_ver;
@@ -224,8 +236,9 @@
{
efi_memory_desc_t *md;
+ init_new_context(NULL, &efi_mm);
+
for_each_efi_memory_desc(&memmap, md) {
- u64 paddr, npages, size;
pgprot_t prot;
if (!(md->attribute & EFI_MEMORY_RUNTIME))
@@ -233,11 +246,6 @@
if (md->virt_addr == 0)
return false;
- paddr = md->phys_addr;
- npages = md->num_pages;
- memrange_efi_to_native(&paddr, &npages);
- size = npages << PAGE_SHIFT;
-
pr_info(" EFI remap 0x%016llx => %p\n",
md->phys_addr, (void *)md->virt_addr);
@@ -254,7 +262,9 @@
else
prot = PAGE_KERNEL;
- create_pgd_mapping(&efi_mm, paddr, md->virt_addr, size, prot);
+ create_pgd_mapping(&efi_mm, md->phys_addr, md->virt_addr,
+ md->num_pages << EFI_PAGE_SHIFT,
+ __pgprot(pgprot_val(prot) | PTE_NG));
}
return true;
}
@@ -270,12 +280,12 @@
if (!efi_enabled(EFI_BOOT)) {
pr_info("EFI services will not be available.\n");
- return -1;
+ return 0;
}
if (efi_runtime_disabled()) {
pr_info("EFI runtime services will be disabled.\n");
- return -1;
+ return 0;
}
pr_info("Remapping and enabling EFI services.\n");
@@ -285,7 +295,7 @@
mapsize);
if (!memmap.map) {
pr_err("Failed to remap EFI memory map\n");
- return -1;
+ return -ENOMEM;
}
memmap.map_end = memmap.map + mapsize;
efi.memmap = &memmap;
@@ -294,13 +304,13 @@
sizeof(efi_system_table_t));
if (!efi.systab) {
pr_err("Failed to remap EFI System Table\n");
- return -1;
+ return -ENOMEM;
}
set_bit(EFI_SYSTEM_TABLES, &efi.flags);
if (!efi_virtmap_init()) {
pr_err("No UEFI virtual mapping was installed -- runtime services will not be available\n");
- return -1;
+ return -ENOMEM;
}
/* Set up runtime services function pointers */
@@ -329,14 +339,7 @@
static void efi_set_pgd(struct mm_struct *mm)
{
- if (mm == &init_mm)
- cpu_set_reserved_ttbr0();
- else
- cpu_switch_mm(mm->pgd, mm);
-
- local_flush_tlb_all();
- if (icache_is_aivivt())
- __local_flush_icache_all();
+ switch_mm(NULL, mm, NULL);
}
void efi_virtmap_load(void)
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index fce95e1..1095aa4 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -1,3 +1,4 @@
+#include <linux/ftrace.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <asm/cacheflush.h>
@@ -71,6 +72,13 @@
local_dbg_save(flags);
/*
+ * Function graph tracer state gets incosistent when the kernel
+ * calls functions that never return (aka suspend finishers) hence
+ * disable graph tracing during their execution.
+ */
+ pause_graph_tracing();
+
+ /*
* mm context saved on the stack, it will be restored when
* the cpu comes out of reset through the identity mapped
* page tables, so that the thread address space is properly
@@ -111,6 +119,8 @@
hw_breakpoint_restore(NULL);
}
+ unpause_graph_tracing();
+
/*
* Restore pstate flags. OS lock and mdscr have been already
* restored, so from this point onwards, debugging is fully
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 1599701..86c2898 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -864,6 +864,10 @@
ENDPROC(__kvm_flush_vm_context)
__kvm_hyp_panic:
+ // Stash PAR_EL1 before corrupting it in __restore_sysregs
+ mrs x0, par_el1
+ push x0, xzr
+
// Guess the context by looking at VTTBR:
// If zero, then we're already a host.
// Otherwise restore a minimal host context before panicing.
@@ -898,7 +902,7 @@
mrs x3, esr_el2
mrs x4, far_el2
mrs x5, hpfar_el2
- mrs x6, par_el1
+ pop x6, xzr // active context PAR_EL1
mrs x7, tpidr_el2
mov lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
@@ -914,7 +918,7 @@
ENDPROC(__kvm_hyp_panic)
__hyp_panic_str:
- .ascii "HYP panic:\nPS:%08x PC:%p ESR:%p\nFAR:%p HPFAR:%p PAR:%p\nVCPU:%p\n\0"
+ .ascii "HYP panic:\nPS:%08x PC:%016x ESR:%08x\nFAR:%016x HPFAR:%016x PAR:%016x\nVCPU:%p\n\0"
.align 2
@@ -1015,9 +1019,15 @@
b.ne 1f // Not an abort we care about
/* This is an abort. Check for permission fault */
+alternative_if_not ARM64_WORKAROUND_834220
and x2, x1, #ESR_ELx_FSC_TYPE
cmp x2, #FSC_PERM
b.ne 1f // Not a permission fault
+alternative_else
+ nop // Use the permission fault path to
+ nop // check for a valid S1 translation,
+ nop // regardless of the ESR value.
+alternative_endif
/*
* Check for Stage-1 page table walk, which is guaranteed
diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
index 85c5715..648112e 100644
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -48,7 +48,7 @@
/* Note: These now point to the banked copies */
*vcpu_spsr(vcpu) = new_spsr_value;
- *vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
+ *vcpu_reg32(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
/* Branch to exception vector */
if (sctlr & (1 << 13))
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index f636a26..e87f53f 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -76,13 +76,28 @@
__flush_icache_all();
}
-static int is_reserved_asid(u64 asid)
+static bool check_update_reserved_asid(u64 asid, u64 newasid)
{
int cpu;
- for_each_possible_cpu(cpu)
- if (per_cpu(reserved_asids, cpu) == asid)
- return 1;
- return 0;
+ bool hit = false;
+
+ /*
+ * Iterate over the set of reserved ASIDs looking for a match.
+ * If we find one, then we can update our mm to use newasid
+ * (i.e. the same ASID in the current generation) but we can't
+ * exit the loop early, since we need to ensure that all copies
+ * of the old ASID are updated to reflect the mm. Failure to do
+ * so could result in us missing the reserved ASID in a future
+ * generation.
+ */
+ for_each_possible_cpu(cpu) {
+ if (per_cpu(reserved_asids, cpu) == asid) {
+ hit = true;
+ per_cpu(reserved_asids, cpu) = newasid;
+ }
+ }
+
+ return hit;
}
static u64 new_context(struct mm_struct *mm, unsigned int cpu)
@@ -92,12 +107,14 @@
u64 generation = atomic64_read(&asid_generation);
if (asid != 0) {
+ u64 newasid = generation | (asid & ~ASID_MASK);
+
/*
* If our current ASID was active during a rollover, we
* can continue to use it and this was just a false alarm.
*/
- if (is_reserved_asid(asid))
- return generation | (asid & ~ASID_MASK);
+ if (check_update_reserved_asid(asid, newasid))
+ return newasid;
/*
* We had a valid ASID in a previous life, so try to re-use
@@ -105,7 +122,7 @@
*/
asid &= ~ASID_MASK;
if (!__test_and_set_bit(asid, asid_map))
- goto bump_gen;
+ return newasid;
}
/*
@@ -129,10 +146,7 @@
set_asid:
__set_bit(asid, asid_map);
cur_idx = asid;
-
-bump_gen:
- asid |= generation;
- return asid;
+ return asid | generation;
}
void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 131a199..7963aa4 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -18,6 +18,7 @@
*/
#include <linux/gfp.h>
+#include <linux/acpi.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/genalloc.h>
@@ -28,9 +29,6 @@
#include <asm/cacheflush.h>
-struct dma_map_ops *dma_ops;
-EXPORT_SYMBOL(dma_ops);
-
static pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot,
bool coherent)
{
@@ -515,13 +513,7 @@
static int __init arm64_dma_init(void)
{
- int ret;
-
- dma_ops = &swiotlb_dma_ops;
-
- ret = atomic_pool_init();
-
- return ret;
+ return atomic_pool_init();
}
arch_initcall(arm64_dma_init);
@@ -552,10 +544,14 @@
{
bool coherent = is_device_dma_coherent(dev);
int ioprot = dma_direction_to_prot(DMA_BIDIRECTIONAL, coherent);
+ size_t iosize = size;
void *addr;
if (WARN(!dev, "cannot create IOMMU mapping for unknown device\n"))
return NULL;
+
+ size = PAGE_ALIGN(size);
+
/*
* Some drivers rely on this, and we probably don't want the
* possibility of stale kernel data being read by devices anyway.
@@ -566,7 +562,7 @@
struct page **pages;
pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL, coherent);
- pages = iommu_dma_alloc(dev, size, gfp, ioprot, handle,
+ pages = iommu_dma_alloc(dev, iosize, gfp, ioprot, handle,
flush_page);
if (!pages)
return NULL;
@@ -574,7 +570,7 @@
addr = dma_common_pages_remap(pages, size, VM_USERMAP, prot,
__builtin_return_address(0));
if (!addr)
- iommu_dma_free(dev, pages, size, handle);
+ iommu_dma_free(dev, pages, iosize, handle);
} else {
struct page *page;
/*
@@ -591,7 +587,7 @@
if (!addr)
return NULL;
- *handle = iommu_dma_map_page(dev, page, 0, size, ioprot);
+ *handle = iommu_dma_map_page(dev, page, 0, iosize, ioprot);
if (iommu_dma_mapping_error(dev, *handle)) {
if (coherent)
__free_pages(page, get_order(size));
@@ -606,6 +602,9 @@
static void __iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle, struct dma_attrs *attrs)
{
+ size_t iosize = size;
+
+ size = PAGE_ALIGN(size);
/*
* @cpu_addr will be one of 3 things depending on how it was allocated:
* - A remapped array of pages from iommu_dma_alloc(), for all
@@ -617,17 +616,17 @@
* Hence how dodgy the below logic looks...
*/
if (__in_atomic_pool(cpu_addr, size)) {
- iommu_dma_unmap_page(dev, handle, size, 0, NULL);
+ iommu_dma_unmap_page(dev, handle, iosize, 0, NULL);
__free_from_pool(cpu_addr, size);
} else if (is_vmalloc_addr(cpu_addr)){
struct vm_struct *area = find_vm_area(cpu_addr);
if (WARN_ON(!area || !area->pages))
return;
- iommu_dma_free(dev, area->pages, size, &handle);
+ iommu_dma_free(dev, area->pages, iosize, &handle);
dma_common_free_remap(cpu_addr, size, VM_USERMAP);
} else {
- iommu_dma_unmap_page(dev, handle, size, 0, NULL);
+ iommu_dma_unmap_page(dev, handle, iosize, 0, NULL);
__free_pages(virt_to_page(cpu_addr), get_order(size));
}
}
@@ -984,8 +983,8 @@
void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
struct iommu_ops *iommu, bool coherent)
{
- if (!acpi_disabled && !dev->archdata.dma_ops)
- dev->archdata.dma_ops = dma_ops;
+ if (!dev->archdata.dma_ops)
+ dev->archdata.dma_ops = &swiotlb_dma_ops;
dev->archdata.dma_coherent = coherent;
__iommu_setup_dma_ops(dev, dma_base, size, iommu);
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 19211c4..92ddac1 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -393,16 +393,16 @@
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" },
{ do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
- { do_bad, SIGBUS, 0, "reserved access flag fault" },
+ { do_bad, SIGBUS, 0, "unknown 8" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" },
- { do_bad, SIGBUS, 0, "reserved permission fault" },
+ { do_bad, SIGBUS, 0, "unknown 12" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" },
{ do_bad, SIGBUS, 0, "synchronous external abort" },
- { do_bad, SIGBUS, 0, "asynchronous external abort" },
+ { do_bad, SIGBUS, 0, "unknown 17" },
{ do_bad, SIGBUS, 0, "unknown 18" },
{ do_bad, SIGBUS, 0, "unknown 19" },
{ do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
@@ -410,16 +410,16 @@
{ do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
{ do_bad, SIGBUS, 0, "synchronous abort (translation table walk)" },
{ do_bad, SIGBUS, 0, "synchronous parity error" },
- { do_bad, SIGBUS, 0, "asynchronous parity error" },
+ { do_bad, SIGBUS, 0, "unknown 25" },
{ do_bad, SIGBUS, 0, "unknown 26" },
{ do_bad, SIGBUS, 0, "unknown 27" },
- { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
- { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
- { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
- { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" },
+ { do_bad, SIGBUS, 0, "synchronous parity error (translation table walk)" },
{ do_bad, SIGBUS, 0, "unknown 32" },
{ do_bad, SIGBUS, BUS_ADRALN, "alignment fault" },
- { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGBUS, 0, "unknown 34" },
{ do_bad, SIGBUS, 0, "unknown 35" },
{ do_bad, SIGBUS, 0, "unknown 36" },
{ do_bad, SIGBUS, 0, "unknown 37" },
@@ -433,21 +433,21 @@
{ do_bad, SIGBUS, 0, "unknown 45" },
{ do_bad, SIGBUS, 0, "unknown 46" },
{ do_bad, SIGBUS, 0, "unknown 47" },
- { do_bad, SIGBUS, 0, "unknown 48" },
+ { do_bad, SIGBUS, 0, "TLB conflict abort" },
{ do_bad, SIGBUS, 0, "unknown 49" },
{ do_bad, SIGBUS, 0, "unknown 50" },
{ do_bad, SIGBUS, 0, "unknown 51" },
{ do_bad, SIGBUS, 0, "implementation fault (lockdown abort)" },
- { do_bad, SIGBUS, 0, "unknown 53" },
+ { do_bad, SIGBUS, 0, "implementation fault (unsupported exclusive)" },
{ do_bad, SIGBUS, 0, "unknown 54" },
{ do_bad, SIGBUS, 0, "unknown 55" },
{ do_bad, SIGBUS, 0, "unknown 56" },
{ do_bad, SIGBUS, 0, "unknown 57" },
- { do_bad, SIGBUS, 0, "implementation fault (coprocessor abort)" },
+ { do_bad, SIGBUS, 0, "unknown 58" },
{ do_bad, SIGBUS, 0, "unknown 59" },
{ do_bad, SIGBUS, 0, "unknown 60" },
- { do_bad, SIGBUS, 0, "unknown 61" },
- { do_bad, SIGBUS, 0, "unknown 62" },
+ { do_bad, SIGBUS, 0, "section domain fault" },
+ { do_bad, SIGBUS, 0, "page domain fault" },
{ do_bad, SIGBUS, 0, "unknown 63" },
};
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index e3f563c..873e363 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -64,8 +64,12 @@
static void __init *early_alloc(unsigned long sz)
{
- void *ptr = __va(memblock_alloc(sz, sz));
- BUG_ON(!ptr);
+ phys_addr_t phys;
+ void *ptr;
+
+ phys = memblock_alloc(sz, sz);
+ BUG_ON(!phys);
+ ptr = __va(phys);
memset(ptr, 0, sz);
return ptr;
}
@@ -81,55 +85,19 @@
do {
/*
* Need to have the least restrictive permissions available
- * permissions will be fixed up later. Default the new page
- * range as contiguous ptes.
+ * permissions will be fixed up later
*/
- set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC_CONT));
+ set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
pfn++;
} while (pte++, i++, i < PTRS_PER_PTE);
}
-/*
- * Given a PTE with the CONT bit set, determine where the CONT range
- * starts, and clear the entire range of PTE CONT bits.
- */
-static void clear_cont_pte_range(pte_t *pte, unsigned long addr)
-{
- int i;
-
- pte -= CONT_RANGE_OFFSET(addr);
- for (i = 0; i < CONT_PTES; i++) {
- set_pte(pte, pte_mknoncont(*pte));
- pte++;
- }
- flush_tlb_all();
-}
-
-/*
- * Given a range of PTEs set the pfn and provided page protection flags
- */
-static void __populate_init_pte(pte_t *pte, unsigned long addr,
- unsigned long end, phys_addr_t phys,
- pgprot_t prot)
-{
- unsigned long pfn = __phys_to_pfn(phys);
-
- do {
- /* clear all the bits except the pfn, then apply the prot */
- set_pte(pte, pfn_pte(pfn, prot));
- pte++;
- pfn++;
- addr += PAGE_SIZE;
- } while (addr != end);
-}
-
static void alloc_init_pte(pmd_t *pmd, unsigned long addr,
- unsigned long end, phys_addr_t phys,
+ unsigned long end, unsigned long pfn,
pgprot_t prot,
void *(*alloc)(unsigned long size))
{
pte_t *pte;
- unsigned long next;
if (pmd_none(*pmd) || pmd_sect(*pmd)) {
pte = alloc(PTRS_PER_PTE * sizeof(pte_t));
@@ -142,27 +110,9 @@
pte = pte_offset_kernel(pmd, addr);
do {
- next = min(end, (addr + CONT_SIZE) & CONT_MASK);
- if (((addr | next | phys) & ~CONT_MASK) == 0) {
- /* a block of CONT_PTES */
- __populate_init_pte(pte, addr, next, phys,
- __pgprot(pgprot_val(prot) | PTE_CONT));
- } else {
- /*
- * If the range being split is already inside of a
- * contiguous range but this PTE isn't going to be
- * contiguous, then we want to unmark the adjacent
- * ranges, then update the portion of the range we
- * are interrested in.
- */
- clear_cont_pte_range(pte, addr);
- __populate_init_pte(pte, addr, next, phys, prot);
- }
-
- pte += (next - addr) >> PAGE_SHIFT;
- phys += next - addr;
- addr = next;
- } while (addr != end);
+ set_pte(pte, pfn_pte(pfn, prot));
+ pfn++;
+ } while (pte++, addr += PAGE_SIZE, addr != end);
}
static void split_pud(pud_t *old_pud, pmd_t *pmd)
@@ -223,7 +173,8 @@
}
}
} else {
- alloc_init_pte(pmd, addr, next, phys, prot, alloc);
+ alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys),
+ prot, alloc);
}
phys += next - addr;
} while (pmd++, addr = next, addr != end);
@@ -362,8 +313,8 @@
* for now. This will get more fine grained later once all memory
* is mapped
*/
- unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
- unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
+ unsigned long kernel_x_start = round_down(__pa(_stext), SWAPPER_BLOCK_SIZE);
+ unsigned long kernel_x_end = round_up(__pa(__init_end), SWAPPER_BLOCK_SIZE);
if (end < kernel_x_start) {
create_mapping(start, __phys_to_virt(start),
@@ -451,18 +402,18 @@
{
#ifdef CONFIG_DEBUG_RODATA
/* now that we are actually fully mapped, make the start/end more fine grained */
- if (!IS_ALIGNED((unsigned long)_stext, SECTION_SIZE)) {
+ if (!IS_ALIGNED((unsigned long)_stext, SWAPPER_BLOCK_SIZE)) {
unsigned long aligned_start = round_down(__pa(_stext),
- SECTION_SIZE);
+ SWAPPER_BLOCK_SIZE);
create_mapping(aligned_start, __phys_to_virt(aligned_start),
__pa(_stext) - aligned_start,
PAGE_KERNEL);
}
- if (!IS_ALIGNED((unsigned long)__init_end, SECTION_SIZE)) {
+ if (!IS_ALIGNED((unsigned long)__init_end, SWAPPER_BLOCK_SIZE)) {
unsigned long aligned_end = round_up(__pa(__init_end),
- SECTION_SIZE);
+ SWAPPER_BLOCK_SIZE);
create_mapping(__pa(__init_end), (unsigned long)__init_end,
aligned_end - __pa(__init_end),
PAGE_KERNEL);
@@ -475,7 +426,7 @@
{
create_mapping_late(__pa(_stext), (unsigned long)_stext,
(unsigned long)_etext - (unsigned long)_stext,
- PAGE_KERNEL_EXEC | PTE_RDONLY);
+ PAGE_KERNEL_ROX);
}
#endif
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index cf3c7d4..d6a53ef 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -50,7 +50,7 @@
[BPF_REG_8] = A64_R(21),
[BPF_REG_9] = A64_R(22),
/* read-only frame pointer to access stack */
- [BPF_REG_FP] = A64_FP,
+ [BPF_REG_FP] = A64_R(25),
/* temporary register for internal BPF JIT */
[TMP_REG_1] = A64_R(23),
[TMP_REG_2] = A64_R(24),
@@ -155,18 +155,49 @@
stack_size += 4; /* extra for skb_copy_bits buffer */
stack_size = STACK_ALIGN(stack_size);
+ /*
+ * BPF prog stack layout
+ *
+ * high
+ * original A64_SP => 0:+-----+ BPF prologue
+ * |FP/LR|
+ * current A64_FP => -16:+-----+
+ * | ... | callee saved registers
+ * +-----+
+ * | | x25/x26
+ * BPF fp register => -80:+-----+
+ * | |
+ * | ... | BPF prog stack
+ * | |
+ * | |
+ * current A64_SP => +-----+
+ * | |
+ * | ... | Function call stack
+ * | |
+ * +-----+
+ * low
+ *
+ */
+
+ /* Save FP and LR registers to stay align with ARM64 AAPCS */
+ emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx);
+ emit(A64_MOV(1, A64_FP, A64_SP), ctx);
+
/* Save callee-saved register */
emit(A64_PUSH(r6, r7, A64_SP), ctx);
emit(A64_PUSH(r8, r9, A64_SP), ctx);
if (ctx->tmp_used)
emit(A64_PUSH(tmp1, tmp2, A64_SP), ctx);
- /* Set up BPF stack */
- emit(A64_SUB_I(1, A64_SP, A64_SP, stack_size), ctx);
+ /* Save fp (x25) and x26. SP requires 16 bytes alignment */
+ emit(A64_PUSH(fp, A64_R(26), A64_SP), ctx);
- /* Set up frame pointer */
+ /* Set up BPF prog stack base register (x25) */
emit(A64_MOV(1, fp, A64_SP), ctx);
+ /* Set up function call stack */
+ emit(A64_SUB_I(1, A64_SP, A64_SP, stack_size), ctx);
+
/* Clear registers A and X */
emit_a64_mov_i64(ra, 0, ctx);
emit_a64_mov_i64(rx, 0, ctx);
@@ -190,14 +221,17 @@
/* We're done with BPF stack */
emit(A64_ADD_I(1, A64_SP, A64_SP, stack_size), ctx);
+ /* Restore fs (x25) and x26 */
+ emit(A64_POP(fp, A64_R(26), A64_SP), ctx);
+
/* Restore callee-saved register */
if (ctx->tmp_used)
emit(A64_POP(tmp1, tmp2, A64_SP), ctx);
emit(A64_POP(r8, r9, A64_SP), ctx);
emit(A64_POP(r6, r7, A64_SP), ctx);
- /* Restore frame pointer */
- emit(A64_MOV(1, fp, A64_SP), ctx);
+ /* Restore FP/LR registers */
+ emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx);
/* Set return value */
emit(A64_MOV(1, A64_R(0), r0), ctx);
@@ -758,7 +792,7 @@
if (bpf_jit_enable > 1)
bpf_jit_dump(prog->len, image_size, 2, ctx.image);
- bpf_flush_icache(ctx.image, ctx.image + ctx.idx);
+ bpf_flush_icache(header, ctx.image + ctx.idx);
set_memory_ro((unsigned long)header, header->pages);
prog->bpf_func = (void *)ctx.image;
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
index f7836c6..c32f767 100644
--- a/arch/m68k/coldfire/m54xx.c
+++ b/arch/m68k/coldfire/m54xx.c
@@ -98,7 +98,7 @@
memstart = PAGE_ALIGN(_ramstart);
min_low_pfn = PFN_DOWN(_rambase);
start_pfn = PFN_DOWN(memstart);
- max_low_pfn = PFN_DOWN(_ramend);
+ max_pfn = max_low_pfn = PFN_DOWN(_ramend);
high_memory = (void *)_ramend;
m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 0793a7f..f9d96bf 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
-#define NR_syscalls 375
+#define NR_syscalls 376
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h
index 5e6fae6..36cf129 100644
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@@ -380,5 +380,6 @@
#define __NR_sendmmsg 372
#define __NR_userfaultfd 373
#define __NR_membarrier 374
+#define __NR_mlock2 375
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 88c27d9..76b9113 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -238,11 +238,14 @@
* Give all the memory to the bootmap allocator, tell it to put the
* boot mem_map at the start of memory.
*/
+ min_low_pfn = PFN_DOWN(memory_start);
+ max_pfn = max_low_pfn = PFN_DOWN(memory_end);
+
bootmap_size = init_bootmem_node(
NODE_DATA(0),
- memory_start >> PAGE_SHIFT, /* map goes here */
- PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
- memory_end >> PAGE_SHIFT);
+ min_low_pfn, /* map goes here */
+ PFN_DOWN(PAGE_OFFSET),
+ max_pfn);
/*
* Free the usable memory, we have to make sure we do not free
* the bootmem bitmap so we then reserve it after freeing it :-)
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 5dd0e80..282cd90 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -395,3 +395,4 @@
.long sys_sendmmsg
.long sys_userfaultfd
.long sys_membarrier
+ .long sys_mlock2 /* 375 */
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index b958916..8f37fdd 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -250,7 +250,7 @@
high_memory = phys_to_virt(max_addr);
min_low_pfn = availmem >> PAGE_SHIFT;
- max_low_pfn = max_addr >> PAGE_SHIFT;
+ max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
for (i = 0; i < m68k_num_memory; i++) {
addr = m68k_memory[i].addr;
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index a8b942b..2a5f43a 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -118,13 +118,13 @@
memory_end = memory_end & PAGE_MASK;
start_page = __pa(memory_start) >> PAGE_SHIFT;
- num_pages = __pa(memory_end) >> PAGE_SHIFT;
+ max_pfn = num_pages = __pa(memory_end) >> PAGE_SHIFT;
high_memory = (void *)memory_end;
availmem = memory_start;
m68k_setup_node(0);
- availmem += init_bootmem_node(NODE_DATA(0), start_page, 0, num_pages);
+ availmem += init_bootmem(start_page, num_pages);
availmem = (availmem + (PAGE_SIZE-1)) & PAGE_MASK;
free_bootmem(__pa(availmem), memory_end - (availmem));
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 1ba2120..8755d61 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -216,9 +216,9 @@
AR71XX_RESET_SIZE);
ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
AR71XX_PLL_SIZE);
+ ath79_detect_sys_type();
ath79_ddr_ctrl_init();
- ath79_detect_sys_type();
if (mips_machtype != ATH79_MACH_GENERIC_OF)
detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
@@ -281,3 +281,8 @@
"Generic",
"Generic AR71XX/AR724X/AR913X based board",
ath79_generic_init);
+
+MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
+ "DTB",
+ "Generic AR71XX/AR724X/AR913X based board (DT)",
+ NULL);
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index fb7734e..13d0439 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -107,7 +107,7 @@
miscintc: interrupt-controller@18060010 {
compatible = "qca,ar9132-misc-intc",
"qca,ar7100-misc-intc";
- reg = <0x18060010 0x4>;
+ reg = <0x18060010 0x8>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index ad1fccd..2046c02 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -200,8 +200,9 @@
{
/* avoid <linux/mm.h> include hell */
extern unsigned long max_mapnr;
+ unsigned long pfn_offset = ARCH_PFN_OFFSET;
- return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+ return pfn >= pfn_offset && pfn < max_mapnr;
}
#elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index d5fa3ea..41b1b09 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -1581,7 +1581,7 @@
base = (inst >> 21) & 0x1f;
op_inst = (inst >> 16) & 0x1f;
- offset = inst & 0xffff;
+ offset = (int16_t)inst;
cache = (inst >> 16) & 0x3;
op = (inst >> 18) & 0x7;
diff --git a/arch/mips/kvm/locore.S b/arch/mips/kvm/locore.S
index 7bab3a4..7e22108 100644
--- a/arch/mips/kvm/locore.S
+++ b/arch/mips/kvm/locore.S
@@ -157,9 +157,11 @@
FEXPORT(__kvm_mips_load_asid)
/* Set the ASID for the Guest Kernel */
- INT_SLL t0, t0, 1 /* with kseg0 @ 0x40000000, kernel */
- /* addresses shift to 0x80000000 */
- bltz t0, 1f /* If kernel */
+ PTR_L t0, VCPU_COP0(k1)
+ LONG_L t0, COP0_STATUS(t0)
+ andi t0, KSU_USER | ST0_ERL | ST0_EXL
+ xori t0, KSU_USER
+ bnez t0, 1f /* If kernel */
INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID /* (BD) */
INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID /* else user */
1:
@@ -474,9 +476,11 @@
mtc0 t0, CP0_EPC
/* Set the ASID for the Guest Kernel */
- INT_SLL t0, t0, 1 /* with kseg0 @ 0x40000000, kernel */
- /* addresses shift to 0x80000000 */
- bltz t0, 1f /* If kernel */
+ PTR_L t0, VCPU_COP0(k1)
+ LONG_L t0, COP0_STATUS(t0)
+ andi t0, KSU_USER | ST0_ERL | ST0_EXL
+ xori t0, KSU_USER
+ bnez t0, 1f /* If kernel */
INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID /* (BD) */
INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID /* else user */
1:
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 49ff3bf..b9b803f 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -279,7 +279,7 @@
if (!gebase) {
err = -ENOMEM;
- goto out_free_cpu;
+ goto out_uninit_cpu;
}
kvm_debug("Allocated %d bytes for KVM Exception Handlers @ %p\n",
ALIGN(size, PAGE_SIZE), gebase);
@@ -343,6 +343,9 @@
out_free_gebase:
kfree(gebase);
+out_uninit_cpu:
+ kvm_vcpu_uninit(vcpu);
+
out_free_cpu:
kfree(vcpu);
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index 8a97802..dbbeccc 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -11,6 +11,7 @@
* by the Free Software Foundation.
*/
+#include <linux/delay.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/io.h>
@@ -232,8 +233,7 @@
ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
- for (i = 0; i < 0xfffff; i++)
- ;
+ udelay(1);
rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
index 4f925e0..78b2ef4 100644
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -10,6 +10,8 @@
* option) any later version.
*/
+#include <linux/delay.h>
+
#include <asm/bootinfo.h>
#include <asm/cacheflush.h>
#include <asm/idle.h>
@@ -77,7 +79,7 @@
*/
/* Wait a bit for the DDRC to settle */
- for (i = 0; i < 100000000; i++);
+ mdelay(125);
#if defined(CONFIG_PMC_MSP7120_GW)
/*
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index 244f942..db8f88b 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -3,6 +3,8 @@
*
* Reset a SNI machine.
*/
+#include <linux/delay.h>
+
#include <asm/io.h>
#include <asm/reboot.h>
#include <asm/sni.h>
@@ -32,9 +34,9 @@
for (;;) {
for (i = 0; i < 100; i++) {
kb_wait();
- for (j = 0; j < 100000 ; j++)
- /* nothing */;
+ udelay(50);
outb_p(0xfe, 0x64); /* pulse reset low */
+ udelay(50);
}
}
}
diff --git a/arch/nios2/mm/cacheflush.c b/arch/nios2/mm/cacheflush.c
index 223cdcc..87bf88e 100644
--- a/arch/nios2/mm/cacheflush.c
+++ b/arch/nios2/mm/cacheflush.c
@@ -23,22 +23,6 @@
end += (cpuinfo.dcache_line_size - 1);
end &= ~(cpuinfo.dcache_line_size - 1);
- for (addr = start; addr < end; addr += cpuinfo.dcache_line_size) {
- __asm__ __volatile__ (" flushda 0(%0)\n"
- : /* Outputs */
- : /* Inputs */ "r"(addr)
- /* : No clobber */);
- }
-}
-
-static void __flush_dcache_all(unsigned long start, unsigned long end)
-{
- unsigned long addr;
-
- start &= ~(cpuinfo.dcache_line_size - 1);
- end += (cpuinfo.dcache_line_size - 1);
- end &= ~(cpuinfo.dcache_line_size - 1);
-
if (end > start + cpuinfo.dcache_size)
end = start + cpuinfo.dcache_size;
@@ -112,7 +96,7 @@
void flush_cache_all(void)
{
- __flush_dcache_all(0, cpuinfo.dcache_size);
+ __flush_dcache(0, cpuinfo.dcache_size);
__flush_icache(0, cpuinfo.icache_size);
}
@@ -182,7 +166,7 @@
*/
unsigned long start = (unsigned long)page_address(page);
- __flush_dcache_all(start, start + PAGE_SIZE);
+ __flush_dcache(start, start + PAGE_SIZE);
}
void flush_dcache_page(struct page *page)
@@ -268,7 +252,7 @@
{
flush_cache_page(vma, user_vaddr, page_to_pfn(page));
memcpy(dst, src, len);
- __flush_dcache_all((unsigned long)src, (unsigned long)src + len);
+ __flush_dcache((unsigned long)src, (unsigned long)src + len);
if (vma->vm_flags & VM_EXEC)
__flush_icache((unsigned long)src, (unsigned long)src + len);
}
@@ -279,7 +263,7 @@
{
flush_cache_page(vma, user_vaddr, page_to_pfn(page));
memcpy(dst, src, len);
- __flush_dcache_all((unsigned long)dst, (unsigned long)dst + len);
+ __flush_dcache((unsigned long)dst, (unsigned long)dst + len);
if (vma->vm_flags & VM_EXEC)
__flush_icache((unsigned long)dst, (unsigned long)dst + len);
}
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index c365469..729f891 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -108,6 +108,9 @@
default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
default 2
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y if PA20
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
diff --git a/arch/parisc/include/asm/hugetlb.h b/arch/parisc/include/asm/hugetlb.h
new file mode 100644
index 0000000..7d56a9c
--- /dev/null
+++ b/arch/parisc/include/asm/hugetlb.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_PARISC64_HUGETLB_H
+#define _ASM_PARISC64_HUGETLB_H
+
+#include <asm/page.h>
+#include <asm-generic/hugetlb.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+ unsigned long addr,
+ unsigned long len) {
+ return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+ unsigned long addr, unsigned long len)
+{
+ if (len & ~HPAGE_MASK)
+ return -EINVAL;
+ if (addr & ~HPAGE_MASK)
+ return -EINVAL;
+ return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+ unsigned long addr, unsigned long end,
+ unsigned long floor,
+ unsigned long ceiling)
+{
+ free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+ return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+ return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_t old_pte = *ptep;
+ set_huge_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep,
+ pte_t pte, int dirty)
+{
+ int changed = !pte_same(*ptep, pte);
+ if (changed) {
+ set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
+ flush_tlb_page(vma, addr);
+ }
+ return changed;
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+ return *ptep;
+}
+
+static inline void arch_clear_hugepage_flags(struct page *page)
+{
+}
+
+#endif /* _ASM_PARISC64_HUGETLB_H */
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 60d5d17..80e742a 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -145,11 +145,22 @@
#endif /* CONFIG_DISCONTIGMEM */
#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SHIFT 22 /* 4MB (is this fixed?) */
+#define HPAGE_SHIFT PMD_SHIFT /* fixed for transparent huge pages */
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define REAL_HPAGE_SHIFT 20 /* 20 = 1MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_1M
+#elif !defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define REAL_HPAGE_SHIFT 22 /* 22 = 4MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4M
+#else
+# define REAL_HPAGE_SHIFT 24 /* 24 = 16MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16M
#endif
+#endif /* CONFIG_HUGETLB_PAGE */
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
index 3edbb9f..f2fd327 100644
--- a/arch/parisc/include/asm/pgalloc.h
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -35,7 +35,7 @@
PxD_FLAG_VALID |
PxD_FLAG_ATTACHED)
+ (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT));
- /* The first pmd entry also is marked with _PAGE_GATEWAY as
+ /* The first pmd entry also is marked with PxD_FLAG_ATTACHED as
* a signal that this pmd may not be freed */
__pgd_val_set(*pgd, PxD_FLAG_ATTACHED);
#endif
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index f93c4a4..d8534f9 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -83,7 +83,11 @@
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
/* This is the size of the initially mapped kernel memory */
-#define KERNEL_INITIAL_ORDER 24 /* 0 to 1<<24 = 16MB */
+#ifdef CONFIG_64BIT
+#define KERNEL_INITIAL_ORDER 25 /* 1<<25 = 32MB */
+#else
+#define KERNEL_INITIAL_ORDER 24 /* 1<<24 = 16MB */
+#endif
#define KERNEL_INITIAL_SIZE (1 << KERNEL_INITIAL_ORDER)
#if CONFIG_PGTABLE_LEVELS == 3
@@ -167,7 +171,7 @@
#define _PAGE_NO_CACHE_BIT 24 /* (0x080) Uncached Page (U bit) */
#define _PAGE_ACCESSED_BIT 23 /* (0x100) Software: Page Accessed */
#define _PAGE_PRESENT_BIT 22 /* (0x200) Software: translation valid */
-/* bit 21 was formerly the FLUSH bit but is now unused */
+#define _PAGE_HPAGE_BIT 21 /* (0x400) Software: Huge Page */
#define _PAGE_USER_BIT 20 /* (0x800) Software: User accessible page */
/* N.B. The bits are defined in terms of a 32 bit word above, so the */
@@ -194,6 +198,7 @@
#define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT))
#define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT))
#define _PAGE_PRESENT (1 << xlate_pabit(_PAGE_PRESENT_BIT))
+#define _PAGE_HUGE (1 << xlate_pabit(_PAGE_HPAGE_BIT))
#define _PAGE_USER (1 << xlate_pabit(_PAGE_USER_BIT))
#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | _PAGE_DIRTY | _PAGE_ACCESSED)
@@ -217,7 +222,7 @@
#define PxD_FLAG_VALID (1 << xlate_pabit(_PxD_VALID_BIT))
#define PxD_FLAG_MASK (0xf)
#define PxD_FLAG_SHIFT (4)
-#define PxD_VALUE_SHIFT (8) /* (PAGE_SHIFT-PxD_FLAG_SHIFT) */
+#define PxD_VALUE_SHIFT (PFN_PTE_SHIFT-PxD_FLAG_SHIFT)
#ifndef __ASSEMBLY__
@@ -363,6 +368,18 @@
static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
/*
+ * Huge pte definitions.
+ */
+#ifdef CONFIG_HUGETLB_PAGE
+#define pte_huge(pte) (pte_val(pte) & _PAGE_HUGE)
+#define pte_mkhuge(pte) (__pte(pte_val(pte) | _PAGE_HUGE))
+#else
+#define pte_huge(pte) (0)
+#define pte_mkhuge(pte) (pte)
+#endif
+
+
+/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
@@ -410,8 +427,9 @@
/* Find an entry in the second-level page table.. */
#if CONFIG_PGTABLE_LEVELS == 3
+#define pmd_index(addr) (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
#define pmd_offset(dir,address) \
-((pmd_t *) pgd_page_vaddr(*(dir)) + (((address)>>PMD_SHIFT) & (PTRS_PER_PMD-1)))
+((pmd_t *) pgd_page_vaddr(*(dir)) + pmd_index(address))
#else
#define pmd_offset(dir,addr) ((pmd_t *) dir)
#endif
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 54adb60..7e759ec 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -192,33 +192,6 @@
*/
typedef unsigned int elf_caddr_t;
-#define start_thread_som(regs, new_pc, new_sp) do { \
- unsigned long *sp = (unsigned long *)new_sp; \
- __u32 spaceid = (__u32)current->mm->context; \
- unsigned long pc = (unsigned long)new_pc; \
- /* offset pc for priv. level */ \
- pc |= 3; \
- \
- regs->iasq[0] = spaceid; \
- regs->iasq[1] = spaceid; \
- regs->iaoq[0] = pc; \
- regs->iaoq[1] = pc + 4; \
- regs->sr[2] = LINUX_GATEWAY_SPACE; \
- regs->sr[3] = 0xffff; \
- regs->sr[4] = spaceid; \
- regs->sr[5] = spaceid; \
- regs->sr[6] = spaceid; \
- regs->sr[7] = spaceid; \
- regs->gr[ 0] = USER_PSW; \
- regs->gr[30] = ((new_sp)+63)&~63; \
- regs->gr[31] = pc; \
- \
- get_user(regs->gr[26],&sp[0]); \
- get_user(regs->gr[25],&sp[-1]); \
- get_user(regs->gr[24],&sp[-2]); \
- get_user(regs->gr[23],&sp[-3]); \
-} while(0)
-
/* The ELF abi wants things done a "wee bit" differently than
* som does. Supporting this behavior here avoids
* having our own version of create_elf_tables.
diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h
index ecc3ae1..dd4d187 100644
--- a/arch/parisc/include/uapi/asm/mman.h
+++ b/arch/parisc/include/uapi/asm/mman.h
@@ -49,16 +49,6 @@
#define MADV_DONTFORK 10 /* don't inherit across fork */
#define MADV_DOFORK 11 /* do inherit across fork */
-/* The range 12-64 is reserved for page size specification. */
-#define MADV_4K_PAGES 12 /* Use 4K pages */
-#define MADV_16K_PAGES 14 /* Use 16K pages */
-#define MADV_64K_PAGES 16 /* Use 64K pages */
-#define MADV_256K_PAGES 18 /* Use 256K pages */
-#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */
-#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */
-#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */
-#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */
-
#define MADV_MERGEABLE 65 /* KSM may merge identical pages */
#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 59001ce..d2f6257 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -290,6 +290,14 @@
DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
DEFINE(ASM_PT_INITIAL, PT_INITIAL);
BLANK();
+ /* HUGEPAGE_SIZE is only used in vmlinux.lds.S to align kernel text
+ * and kernel data on physical huge pages */
+#ifdef CONFIG_HUGETLB_PAGE
+ DEFINE(HUGEPAGE_SIZE, 1UL << REAL_HPAGE_SHIFT);
+#else
+ DEFINE(HUGEPAGE_SIZE, PAGE_SIZE);
+#endif
+ BLANK();
DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
DEFINE(EXCDATA_ADDR, offsetof(struct exception_data, fault_addr));
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index c5ef408..623496c 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -502,21 +502,38 @@
STREG \pte,0(\ptp)
.endm
+ /* We have (depending on the page size):
+ * - 38 to 52-bit Physical Page Number
+ * - 12 to 26-bit page offset
+ */
/* bitshift difference between a PFN (based on kernel's PAGE_SIZE)
* to a CPU TLB 4k PFN (4k => 12 bits to shift) */
- #define PAGE_ADD_SHIFT (PAGE_SHIFT-12)
+ #define PAGE_ADD_SHIFT (PAGE_SHIFT-12)
+ #define PAGE_ADD_HUGE_SHIFT (REAL_HPAGE_SHIFT-12)
/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
- .macro convert_for_tlb_insert20 pte
+ .macro convert_for_tlb_insert20 pte,tmp
+#ifdef CONFIG_HUGETLB_PAGE
+ copy \pte,\tmp
+ extrd,u \tmp,(63-ASM_PFN_PTE_SHIFT)+(63-58)+PAGE_ADD_SHIFT,\
+ 64-PAGE_SHIFT-PAGE_ADD_SHIFT,\pte
+
+ depdi _PAGE_SIZE_ENCODING_DEFAULT,63,\
+ (63-58)+PAGE_ADD_SHIFT,\pte
+ extrd,u,*= \tmp,_PAGE_HPAGE_BIT+32,1,%r0
+ depdi _HUGE_PAGE_SIZE_ENCODING_DEFAULT,63,\
+ (63-58)+PAGE_ADD_HUGE_SHIFT,\pte
+#else /* Huge pages disabled */
extrd,u \pte,(63-ASM_PFN_PTE_SHIFT)+(63-58)+PAGE_ADD_SHIFT,\
64-PAGE_SHIFT-PAGE_ADD_SHIFT,\pte
depdi _PAGE_SIZE_ENCODING_DEFAULT,63,\
(63-58)+PAGE_ADD_SHIFT,\pte
+#endif
.endm
/* Convert the pte and prot to tlb insertion values. How
* this happens is quite subtle, read below */
- .macro make_insert_tlb spc,pte,prot
+ .macro make_insert_tlb spc,pte,prot,tmp
space_to_prot \spc \prot /* create prot id from space */
/* The following is the real subtlety. This is depositing
* T <-> _PAGE_REFTRAP
@@ -553,7 +570,7 @@
depdi 1,12,1,\prot
/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
- convert_for_tlb_insert20 \pte
+ convert_for_tlb_insert20 \pte \tmp
.endm
/* Identical macro to make_insert_tlb above, except it
@@ -646,17 +663,12 @@
/*
- * Align fault_vector_20 on 4K boundary so that both
- * fault_vector_11 and fault_vector_20 are on the
- * same page. This is only necessary as long as we
- * write protect the kernel text, which we may stop
- * doing once we use large page translations to cover
- * the static part of the kernel address space.
+ * Fault_vectors are architecturally required to be aligned on a 2K
+ * boundary
*/
.text
-
- .align 4096
+ .align 2048
ENTRY(fault_vector_20)
/* First vector is invalid (0) */
@@ -1147,7 +1159,7 @@
tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20w
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
idtlbt pte,prot
@@ -1173,7 +1185,7 @@
tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20w
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
idtlbt pte,prot
@@ -1267,7 +1279,7 @@
tlb_lock spc,ptp,pte,t0,t1,dtlb_check_alias_20
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1295,7 +1307,7 @@
tlb_lock spc,ptp,pte,t0,t1,nadtlb_check_alias_20
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1404,7 +1416,7 @@
tlb_lock spc,ptp,pte,t0,t1,itlb_fault
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
iitlbt pte,prot
@@ -1428,7 +1440,7 @@
tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20w
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
iitlbt pte,prot
@@ -1514,7 +1526,7 @@
tlb_lock spc,ptp,pte,t0,t1,itlb_fault
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1534,7 +1546,7 @@
tlb_lock spc,ptp,pte,t0,t1,naitlb_check_alias_20
update_accessed ptp,pte,t0,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
@@ -1566,7 +1578,7 @@
tlb_lock spc,ptp,pte,t0,t1,dbit_fault
update_dirty ptp,pte,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
idtlbt pte,prot
@@ -1610,7 +1622,7 @@
tlb_lock spc,ptp,pte,t0,t1,dbit_fault
update_dirty ptp,pte,t1
- make_insert_tlb spc,pte,prot
+ make_insert_tlb spc,pte,prot,t1
f_extend pte,t1
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index e7d6452..75aa0db 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -69,7 +69,7 @@
stw,ma %arg2,4(%r1)
stw,ma %arg3,4(%r1)
- /* Initialize startup VM. Just map first 8/16 MB of memory */
+ /* Initialize startup VM. Just map first 16/32 MB of memory */
load32 PA(swapper_pg_dir),%r4
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
@@ -107,7 +107,7 @@
/* Now initialize the PTEs themselves. We use RWX for
* everything ... it will get remapped correctly later */
ldo 0+_PAGE_KERNEL_RWX(%r0),%r3 /* Hardwired 0 phys addr start */
- ldi (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
+ load32 (1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
load32 PA(pg0),%r1
$pgt_fill_loop:
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 72a3c65..f7ea626 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -130,7 +130,16 @@
printk(KERN_INFO "The 32-bit Kernel has started...\n");
#endif
- printk(KERN_INFO "Default page size is %dKB.\n", (int)(PAGE_SIZE / 1024));
+ printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ",
+ (int)(PAGE_SIZE / 1024));
+#ifdef CONFIG_HUGETLB_PAGE
+ printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size",
+ 1 << (REAL_HPAGE_SHIFT - 20), 1 << (HPAGE_SHIFT - 20));
+#else
+ printk(KERN_CONT "disabled");
+#endif
+ printk(KERN_CONT ".\n");
+
pdc_console_init();
@@ -377,6 +386,7 @@
void start_parisc(void)
{
extern void start_kernel(void);
+ extern void early_trap_init(void);
int ret, cpunum;
struct pdc_coproc_cfg coproc_cfg;
@@ -397,6 +407,8 @@
panic("must have an fpu to boot linux");
}
+ early_trap_init(); /* initialize checksum of fault_vector */
+
start_kernel();
// not reached
}
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 0b8d26d..3fbd725 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -369,7 +369,7 @@
ldo -16(%r30),%r29 /* Reference param save area */
#endif
ldo TASK_REGS(%r1),%r26
- bl do_syscall_trace_exit,%r2
+ BL do_syscall_trace_exit,%r2
STREG %r28,TASK_PT_GR28(%r1) /* save return value now */
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
@@ -390,7 +390,7 @@
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl do_syscall_trace_exit,%r2
+ BL do_syscall_trace_exit,%r2
ldo TASK_REGS(%r1),%r26
ldil L%syscall_exit_rfi,%r1
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index b99b39f..553b098 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -807,7 +807,7 @@
}
-int __init check_ivt(void *iva)
+void __init initialize_ivt(const void *iva)
{
extern u32 os_hpmc_size;
extern const u32 os_hpmc[];
@@ -818,8 +818,8 @@
u32 *hpmcp;
u32 length;
- if (strcmp((char *)iva, "cows can fly"))
- return -1;
+ if (strcmp((const char *)iva, "cows can fly"))
+ panic("IVT invalid");
ivap = (u32 *)iva;
@@ -839,28 +839,23 @@
check += ivap[i];
ivap[5] = -check;
-
- return 0;
}
+
+/* early_trap_init() is called before we set up kernel mappings and
+ * write-protect the kernel */
+void __init early_trap_init(void)
+{
+ extern const void fault_vector_20;
+
#ifndef CONFIG_64BIT
-extern const void fault_vector_11;
+ extern const void fault_vector_11;
+ initialize_ivt(&fault_vector_11);
#endif
-extern const void fault_vector_20;
+
+ initialize_ivt(&fault_vector_20);
+}
void __init trap_init(void)
{
- void *iva;
-
- if (boot_cpu_data.cpu_type >= pcxu)
- iva = (void *) &fault_vector_20;
- else
-#ifdef CONFIG_64BIT
- panic("Can't boot 64-bit OS on PA1.1 processor!");
-#else
- iva = (void *) &fault_vector_11;
-#endif
-
- if (check_ivt(iva))
- panic("IVT invalid");
}
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 0dacc5c..308f290 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -60,7 +60,7 @@
EXIT_DATA
}
PERCPU_SECTION(8)
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(HUGEPAGE_SIZE);
__init_end = .;
/* freed after init ends here */
@@ -116,7 +116,7 @@
* that we can properly leave these
* as writable
*/
- . = ALIGN(PAGE_SIZE);
+ . = ALIGN(HUGEPAGE_SIZE);
data_start = .;
EXCEPTION_TABLE(8)
@@ -135,8 +135,11 @@
_edata = .;
/* BSS */
- BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE)
+ /* bootmap is allocated in setup_bootmem() directly behind bss. */
+
+ . = ALIGN(HUGEPAGE_SIZE);
_end = . ;
STABS_DEBUG
diff --git a/arch/parisc/mm/Makefile b/arch/parisc/mm/Makefile
index 758ceef..134393d 100644
--- a/arch/parisc/mm/Makefile
+++ b/arch/parisc/mm/Makefile
@@ -3,3 +3,4 @@
#
obj-y := init.o fault.o ioremap.o
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/parisc/mm/hugetlbpage.c b/arch/parisc/mm/hugetlbpage.c
new file mode 100644
index 0000000..f6fdc77
--- /dev/null
+++ b/arch/parisc/mm/hugetlbpage.c
@@ -0,0 +1,161 @@
+/*
+ * PARISC64 Huge TLB page support.
+ *
+ * This parisc implementation is heavily based on the SPARC and x86 code.
+ *
+ * Copyright (C) 2015 Helge Deller <deller@gmx.de>
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/sysctl.h>
+
+#include <asm/mman.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+
+
+unsigned long
+hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+
+ if (len & ~huge_page_mask(h))
+ return -EINVAL;
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED)
+ if (prepare_hugepage_range(file, addr, len))
+ return -EINVAL;
+
+ if (addr)
+ addr = ALIGN(addr, huge_page_size(h));
+
+ /* we need to make sure the colouring is OK */
+ return arch_get_unmapped_area(file, addr, len, pgoff, flags);
+}
+
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+ unsigned long addr, unsigned long sz)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte = NULL;
+
+ /* We must align the address, because our caller will run
+ * set_huge_pte_at() on whatever we return, which writes out
+ * all of the sub-ptes for the hugepage range. So we have
+ * to give it the first such sub-pte.
+ */
+ addr &= HPAGE_MASK;
+
+ pgd = pgd_offset(mm, addr);
+ pud = pud_alloc(mm, pgd, addr);
+ if (pud) {
+ pmd = pmd_alloc(mm, pud, addr);
+ if (pmd)
+ pte = pte_alloc_map(mm, NULL, pmd, addr);
+ }
+ return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte = NULL;
+
+ addr &= HPAGE_MASK;
+
+ pgd = pgd_offset(mm, addr);
+ if (!pgd_none(*pgd)) {
+ pud = pud_offset(pgd, addr);
+ if (!pud_none(*pud)) {
+ pmd = pmd_offset(pud, addr);
+ if (!pmd_none(*pmd))
+ pte = pte_offset_map(pmd, addr);
+ }
+ }
+ return pte;
+}
+
+/* Purge data and instruction TLB entries. Must be called holding
+ * the pa_tlb_lock. The TLB purge instructions are slow on SMP
+ * machines since the purge must be broadcast to all CPUs.
+ */
+static inline void purge_tlb_entries_huge(struct mm_struct *mm, unsigned long addr)
+{
+ int i;
+
+ /* We may use multiple physical huge pages (e.g. 2x1 MB) to emulate
+ * Linux standard huge pages (e.g. 2 MB) */
+ BUILD_BUG_ON(REAL_HPAGE_SHIFT > HPAGE_SHIFT);
+
+ addr &= HPAGE_MASK;
+ addr |= _HUGE_PAGE_SIZE_ENCODING_DEFAULT;
+
+ for (i = 0; i < (1 << (HPAGE_SHIFT-REAL_HPAGE_SHIFT)); i++) {
+ mtsp(mm->context, 1);
+ pdtlb(addr);
+ if (unlikely(split_tlb))
+ pitlb(addr);
+ addr += (1UL << REAL_HPAGE_SHIFT);
+ }
+}
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t entry)
+{
+ unsigned long addr_start;
+ int i;
+
+ addr &= HPAGE_MASK;
+ addr_start = addr;
+
+ for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
+ /* Directly write pte entry. We could call set_pte_at(mm, addr, ptep, entry)
+ * instead, but then we get double locking on pa_tlb_lock. */
+ *ptep = entry;
+ ptep++;
+
+ /* Drop the PAGE_SIZE/non-huge tlb entry */
+ purge_tlb_entries(mm, addr);
+
+ addr += PAGE_SIZE;
+ pte_val(entry) += PAGE_SIZE;
+ }
+
+ purge_tlb_entries_huge(mm, addr_start);
+}
+
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_t entry;
+
+ entry = *ptep;
+ set_huge_pte_at(mm, addr, ptep, __pte(0));
+
+ return entry;
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return 0;
+}
+
+int pud_huge(pud_t pud)
+{
+ return 0;
+}
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index c5fec48..1b366c4 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -409,15 +409,11 @@
unsigned long vaddr;
unsigned long ro_start;
unsigned long ro_end;
- unsigned long fv_addr;
- unsigned long gw_addr;
- extern const unsigned long fault_vector_20;
- extern void * const linux_gateway_page;
+ unsigned long kernel_end;
ro_start = __pa((unsigned long)_text);
ro_end = __pa((unsigned long)&data_start);
- fv_addr = __pa((unsigned long)&fault_vector_20) & PAGE_MASK;
- gw_addr = __pa((unsigned long)&linux_gateway_page) & PAGE_MASK;
+ kernel_end = __pa((unsigned long)&_end);
end_paddr = start_paddr + size;
@@ -475,24 +471,25 @@
for (tmp2 = start_pte; tmp2 < PTRS_PER_PTE; tmp2++, pg_table++) {
pte_t pte;
- /*
- * Map the fault vector writable so we can
- * write the HPMC checksum.
- */
if (force)
pte = __mk_pte(address, pgprot);
- else if (parisc_text_address(vaddr) &&
- address != fv_addr)
+ else if (parisc_text_address(vaddr)) {
pte = __mk_pte(address, PAGE_KERNEL_EXEC);
+ if (address >= ro_start && address < kernel_end)
+ pte = pte_mkhuge(pte);
+ }
else
#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
- if (address >= ro_start && address < ro_end
- && address != fv_addr
- && address != gw_addr)
- pte = __mk_pte(address, PAGE_KERNEL_RO);
- else
+ if (address >= ro_start && address < ro_end) {
+ pte = __mk_pte(address, PAGE_KERNEL_EXEC);
+ pte = pte_mkhuge(pte);
+ } else
#endif
+ {
pte = __mk_pte(address, pgprot);
+ if (address >= ro_start && address < kernel_end)
+ pte = pte_mkhuge(pte);
+ }
if (address >= end_paddr) {
if (force)
@@ -536,15 +533,12 @@
/* force the kernel to see the new TLB entries */
__flush_tlb_range(0, init_begin, init_end);
- /* Attempt to catch anyone trying to execute code here
- * by filling the page with BRK insns.
- */
- memset((void *)init_begin, 0x00, init_end - init_begin);
+
/* finally dump all the instructions which were cached, since the
* pages are no-longer executable */
flush_icache_range(init_begin, init_end);
- free_initmem_default(-1);
+ free_initmem_default(POISON_FREE_INITMEM);
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
@@ -728,8 +722,8 @@
unsigned long size;
start_paddr = pmem_ranges[range].start_pfn << PAGE_SHIFT;
- end_paddr = start_paddr + (pmem_ranges[range].pages << PAGE_SHIFT);
size = pmem_ranges[range].pages << PAGE_SHIFT;
+ end_paddr = start_paddr + size;
map_pages((unsigned long)__va(start_paddr), start_paddr,
size, PAGE_KERNEL, 0);
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a908ada..2220f7a 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -108,6 +108,7 @@
#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */
#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */
#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */
+#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */
#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T)
#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S)
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index c9e26cb..f2b0b1b 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -382,3 +382,4 @@
SYSCALL(shmdt)
SYSCALL(shmget)
COMPAT_SYS(shmctl)
+SYSCALL(mlock2)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 6d8f802..4b6b8ac 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,7 +12,7 @@
#include <uapi/asm/unistd.h>
-#define __NR_syscalls 378
+#define __NR_syscalls 379
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index 81579e9..1effea5 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -400,5 +400,6 @@
#define __NR_shmdt 375
#define __NR_shmget 376
#define __NR_shmctl 377
+#define __NR_mlock2 378
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 75b6676..646bf4d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -551,6 +551,24 @@
msr_diff &= MSR_FP | MSR_VEC | MSR_VSX | MSR_FE0 | MSR_FE1;
}
+ /*
+ * Use the current MSR TM suspended bit to track if we have
+ * checkpointed state outstanding.
+ * On signal delivery, we'd normally reclaim the checkpointed
+ * state to obtain stack pointer (see:get_tm_stackpointer()).
+ * This will then directly return to userspace without going
+ * through __switch_to(). However, if the stack frame is bad,
+ * we need to exit this thread which calls __switch_to() which
+ * will again attempt to reclaim the already saved tm state.
+ * Hence we need to check that we've not already reclaimed
+ * this state.
+ * We do this using the current MSR, rather tracking it in
+ * some specific thread_struct bit, as it has the additional
+ * benifit of checking for a potential TM bad thing exception.
+ */
+ if (!MSR_TM_SUSPENDED(mfmsr()))
+ return;
+
tm_reclaim(thr, thr->regs->msr, cause);
/* Having done the reclaim, we now have the checkpointed
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 0dbee46..ef7c24e 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -875,6 +875,15 @@
return 1;
#endif /* CONFIG_SPE */
+ /* Get the top half of the MSR from the user context */
+ if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
+ return 1;
+ msr_hi <<= 32;
+ /* If TM bits are set to the reserved value, it's an invalid context */
+ if (MSR_TM_RESV(msr_hi))
+ return 1;
+ /* Pull in the MSR TM bits from the user context */
+ regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr_hi & MSR_TS_MASK);
/* Now, recheckpoint. This loads up all of the checkpointed (older)
* registers, including FP and V[S]Rs. After recheckpointing, the
* transactional versions should be loaded.
@@ -884,11 +893,6 @@
current->thread.tm_texasr |= TEXASR_FS;
/* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(¤t->thread, msr);
- /* Get the top half of the MSR */
- if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
- return 1;
- /* Pull in MSR TM from user context */
- regs->msr = (regs->msr & ~MSR_TS_MASK) | ((msr_hi<<32) & MSR_TS_MASK);
/* This loads the speculative FP/VEC state, if used */
if (msr & MSR_FP) {
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 20756df..c676ece 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -438,6 +438,10 @@
/* get MSR separately, transfer the LE bit if doing signal return */
err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+ /* Don't allow reserved mode. */
+ if (MSR_TM_RESV(msr))
+ return -EINVAL;
+
/* pull in MSR TM from user context */
regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 0c5d8ee..d1e7b0a 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -312,6 +312,7 @@
extern void reipl_ccw_dev(struct ccw_dev_id *id);
struct cio_iplinfo {
+ u8 ssid;
u16 devno;
int is_qdio;
};
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 3ad48f2..bab6739 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -206,9 +206,16 @@
} while (0)
#endif /* CONFIG_COMPAT */
-extern unsigned long mmap_rnd_mask;
-
-#define STACK_RND_MASK (test_thread_flag(TIF_31BIT) ? 0x7ff : mmap_rnd_mask)
+/*
+ * Cache aliasing on the latest machines calls for a mapping granularity
+ * of 512KB. For 64-bit processes use a 512KB alignment and a randomization
+ * of up to 1GB. For 31-bit processes the virtual address space is limited,
+ * use no alignment and limit the randomization to 8MB.
+ */
+#define BRK_RND_MASK (is_32bit_task() ? 0x7ffUL : 0x3ffffUL)
+#define MMAP_RND_MASK (is_32bit_task() ? 0x7ffUL : 0x3ff80UL)
+#define MMAP_ALIGN_MASK (is_32bit_task() ? 0 : 0x7fUL)
+#define STACK_RND_MASK MMAP_RND_MASK
#define ARCH_DLINFO \
do { \
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 39ae6a3..86634e7 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -64,7 +64,8 @@
struct ipl_block_ccw {
u8 reserved1[84];
- u8 reserved2[2];
+ u16 reserved2 : 13;
+ u8 ssid : 3;
u16 devno;
u8 vm_flags;
u8 reserved3[3];
diff --git a/arch/s390/include/asm/pci_dma.h b/arch/s390/include/asm/pci_dma.h
index 7a7abf1..1aac41e 100644
--- a/arch/s390/include/asm/pci_dma.h
+++ b/arch/s390/include/asm/pci_dma.h
@@ -195,5 +195,7 @@
void dma_free_seg_table(unsigned long);
unsigned long *dma_alloc_cpu_table(void);
void dma_cleanup_tables(unsigned long *);
-void dma_update_cpu_trans(unsigned long *, void *, dma_addr_t, int);
+unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr);
+void dma_update_cpu_trans(unsigned long *entry, void *page_addr, int flags);
+
#endif
diff --git a/arch/s390/include/asm/trace/diag.h b/arch/s390/include/asm/trace/diag.h
index 776f307..cc6cfe7 100644
--- a/arch/s390/include/asm/trace/diag.h
+++ b/arch/s390/include/asm/trace/diag.h
@@ -19,7 +19,7 @@
#define TRACE_INCLUDE_PATH asm/trace
#define TRACE_INCLUDE_FILE diag
-TRACE_EVENT(diagnose,
+TRACE_EVENT(s390_diagnose,
TP_PROTO(unsigned short nr),
TP_ARGS(nr),
TP_STRUCT__entry(
@@ -32,9 +32,9 @@
);
#ifdef CONFIG_TRACEPOINTS
-void trace_diagnose_norecursion(int diag_nr);
+void trace_s390_diagnose_norecursion(int diag_nr);
#else
-static inline void trace_diagnose_norecursion(int diag_nr) { }
+static inline void trace_s390_diagnose_norecursion(int diag_nr) { }
#endif
#endif /* _TRACE_S390_DIAG_H */
diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h
index a848adb..34ec202 100644
--- a/arch/s390/include/uapi/asm/unistd.h
+++ b/arch/s390/include/uapi/asm/unistd.h
@@ -192,14 +192,14 @@
#define __NR_set_tid_address 252
#define __NR_fadvise64 253
#define __NR_timer_create 254
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
/* Number 263 is reserved for vserver */
#define __NR_statfs64 265
#define __NR_fstatfs64 266
@@ -309,7 +309,8 @@
#define __NR_recvfrom 371
#define __NR_recvmsg 372
#define __NR_shutdown 373
-#define NR_syscalls 374
+#define __NR_mlock2 374
+#define NR_syscalls 375
/*
* There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c
index 09f1940..fac4eed 100644
--- a/arch/s390/kernel/compat_wrapper.c
+++ b/arch/s390/kernel/compat_wrapper.c
@@ -176,3 +176,4 @@
COMPAT_SYSCALL_WRAP3(getsockname, int, fd, struct sockaddr __user *, usockaddr, int __user *, usockaddr_len);
COMPAT_SYSCALL_WRAP3(getpeername, int, fd, struct sockaddr __user *, usockaddr, int __user *, usockaddr_len);
COMPAT_SYSCALL_WRAP6(sendto, int, fd, void __user *, buff, size_t, len, unsigned int, flags, struct sockaddr __user *, addr, int, addr_len);
+COMPAT_SYSCALL_WRAP3(mlock2, unsigned long, start, size_t, len, int, flags);
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index f98766e..48b37b8 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -121,14 +121,14 @@
void diag_stat_inc(enum diag_stat_enum nr)
{
this_cpu_inc(diag_stat.counter[nr]);
- trace_diagnose(diag_map[nr].code);
+ trace_s390_diagnose(diag_map[nr].code);
}
EXPORT_SYMBOL(diag_stat_inc);
void diag_stat_inc_norecursion(enum diag_stat_enum nr)
{
this_cpu_inc(diag_stat.counter[nr]);
- trace_diagnose_norecursion(diag_map[nr].code);
+ trace_s390_diagnose_norecursion(diag_map[nr].code);
}
EXPORT_SYMBOL(diag_stat_inc_norecursion);
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 1255c6c..301ee9c 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -26,6 +26,7 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/ptrace.h>
#define ARCH_OFFSET 4
@@ -59,19 +60,6 @@
.long 0x020006e0,0x20000050
.org 0x200
-#
-# subroutine to set architecture mode
-#
-.Lsetmode:
- mvi __LC_AR_MODE_ID,1 # set esame flag
- slr %r0,%r0 # set cpuid to zero
- lhi %r1,2 # mode 2 = esame (dump)
- sigp %r1,%r0,0x12 # switch to esame mode
- bras %r13,0f
- .fill 16,4,0x0
-0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
- sam31 # switch to 31 bit addressing mode
- br %r14
#
# subroutine to wait for end I/O
@@ -159,7 +147,14 @@
.long 0x02200050,0x00000000
iplstart:
- bas %r14,.Lsetmode # Immediately switch to 64 bit mode
+ mvi __LC_AR_MODE_ID,1 # set esame flag
+ slr %r0,%r0 # set cpuid to zero
+ lhi %r1,2 # mode 2 = esame (dump)
+ sigp %r1,%r0,0x12 # switch to esame mode
+ bras %r13,0f
+ .fill 16,4,0x0
+0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
+ sam31 # switch to 31 bit addressing mode
lh %r1,0xb8 # test if subchannel number
bct %r1,.Lnoload # is valid
l %r1,0xb8 # load ipl subchannel number
@@ -269,71 +264,6 @@
.Lcpuid:.fill 8,1,0
#
-# SALIPL loader support. Based on a patch by Rob van der Heij.
-# This entry point is called directly from the SALIPL loader and
-# doesn't need a builtin ipl record.
-#
- .org 0x800
-ENTRY(start)
- stm %r0,%r15,0x07b0 # store registers
- bas %r14,.Lsetmode # Immediately switch to 64 bit mode
- basr %r12,%r0
-.base:
- l %r11,.parm
- l %r8,.cmd # pointer to command buffer
-
- ltr %r9,%r9 # do we have SALIPL parameters?
- bp .sk8x8
-
- mvc 0(64,%r8),0x00b0 # copy saved registers
- xc 64(240-64,%r8),0(%r8) # remainder of buffer
- tr 0(64,%r8),.lowcase
- b .gotr
-.sk8x8:
- mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
-.gotr:
- slr %r0,%r0
- st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
- st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
- j startup # continue with startup
-.cmd: .long COMMAND_LINE # address of command line buffer
-.parm: .long PARMAREA
-.lowcase:
- .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
- .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
- .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
- .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
- .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
- .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
- .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
- .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
- .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
- .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
- .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
- .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
- .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
- .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
- .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
- .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
-
- .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
- .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
- .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
- .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
- .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
- .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
- .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
- .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
- .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
- .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
- .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
- .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
- .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
- .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
- .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
- .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-
-#
# startup-code at 0x10000, running in absolute addressing mode
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL
@@ -364,7 +294,7 @@
bras %r13,0f
.fill 16,4,0x0
0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
- sam31 # switch to 31 bit addressing mode
+ sam64 # switch to 64 bit addressing mode
basr %r13,0 # get base
.LPG0:
xc 0x200(256),0x200 # partially clear lowcore
@@ -395,7 +325,7 @@
jnz 1b
j 4f
2: l %r15,.Lstack-.LPG0(%r13)
- ahi %r15,-96
+ ahi %r15,-STACK_FRAME_OVERHEAD
la %r2,.Lals_string-.LPG0(%r13)
l %r3,.Lsclp_print-.LPG0(%r13)
basr %r14,%r3
@@ -429,8 +359,7 @@
.long 1, 0xc0000000
#endif
4:
- /* Continue with 64bit startup code in head64.S */
- sam64 # switch to 64 bit mode
+ /* Continue with startup code in head64.S */
jg startup_continue
.align 8
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index f6d8acd..b1f0a90 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -121,6 +121,7 @@
* Must be in data section since the bss section
* is not cleared when these are accessed.
*/
+static u8 ipl_ssid __attribute__((__section__(".data"))) = 0;
static u16 ipl_devno __attribute__((__section__(".data"))) = 0;
u32 ipl_flags __attribute__((__section__(".data"))) = 0;
@@ -197,6 +198,33 @@
return snprintf(page, PAGE_SIZE, _format, ##args); \
}
+#define IPL_ATTR_CCW_STORE_FN(_prefix, _name, _ipl_blk) \
+static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \
+ struct kobj_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ unsigned long long ssid, devno; \
+ \
+ if (sscanf(buf, "0.%llx.%llx\n", &ssid, &devno) != 2) \
+ return -EINVAL; \
+ \
+ if (ssid > __MAX_SSID || devno > __MAX_SUBCHANNEL) \
+ return -EINVAL; \
+ \
+ _ipl_blk.ssid = ssid; \
+ _ipl_blk.devno = devno; \
+ return len; \
+}
+
+#define DEFINE_IPL_CCW_ATTR_RW(_prefix, _name, _ipl_blk) \
+IPL_ATTR_SHOW_FN(_prefix, _name, "0.%x.%04x\n", \
+ _ipl_blk.ssid, _ipl_blk.devno); \
+IPL_ATTR_CCW_STORE_FN(_prefix, _name, _ipl_blk); \
+static struct kobj_attribute sys_##_prefix##_##_name##_attr = \
+ __ATTR(_name, (S_IRUGO | S_IWUSR), \
+ sys_##_prefix##_##_name##_show, \
+ sys_##_prefix##_##_name##_store) \
+
#define DEFINE_IPL_ATTR_RO(_prefix, _name, _format, _value) \
IPL_ATTR_SHOW_FN(_prefix, _name, _format, _value) \
static struct kobj_attribute sys_##_prefix##_##_name##_attr = \
@@ -395,7 +423,7 @@
switch (ipl_info.type) {
case IPL_TYPE_CCW:
- return sprintf(page, "0.0.%04x\n", ipl_devno);
+ return sprintf(page, "0.%x.%04x\n", ipl_ssid, ipl_devno);
case IPL_TYPE_FCP:
case IPL_TYPE_FCP_DUMP:
return sprintf(page, "0.0.%04x\n", ipl->ipl_info.fcp.devno);
@@ -687,21 +715,14 @@
struct bin_attribute *attr,
char *buf, loff_t off, size_t count)
{
+ size_t scpdata_len = count;
size_t padding;
- size_t scpdata_len;
- if (off < 0)
+
+ if (off)
return -EINVAL;
- if (off >= DIAG308_SCPDATA_SIZE)
- return -ENOSPC;
-
- if (count > DIAG308_SCPDATA_SIZE - off)
- count = DIAG308_SCPDATA_SIZE - off;
-
- memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf + off, count);
- scpdata_len = off + count;
-
+ memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf, count);
if (scpdata_len % 8) {
padding = 8 - (scpdata_len % 8);
memset(reipl_block_fcp->ipl_info.fcp.scp_data + scpdata_len,
@@ -717,7 +738,7 @@
}
static struct bin_attribute sys_reipl_fcp_scp_data_attr =
__BIN_ATTR(scp_data, (S_IRUGO | S_IWUSR), reipl_fcp_scpdata_read,
- reipl_fcp_scpdata_write, PAGE_SIZE);
+ reipl_fcp_scpdata_write, DIAG308_SCPDATA_SIZE);
static struct bin_attribute *reipl_fcp_bin_attrs[] = {
&sys_reipl_fcp_scp_data_attr,
@@ -814,9 +835,7 @@
};
/* CCW reipl device attributes */
-
-DEFINE_IPL_ATTR_RW(reipl_ccw, device, "0.0.%04llx\n", "0.0.%llx\n",
- reipl_block_ccw->ipl_info.ccw.devno);
+DEFINE_IPL_CCW_ATTR_RW(reipl_ccw, device, reipl_block_ccw->ipl_info.ccw);
/* NSS wrapper */
static ssize_t reipl_nss_loadparm_show(struct kobject *kobj,
@@ -1056,8 +1075,8 @@
switch (reipl_method) {
case REIPL_METHOD_CCW_CIO:
+ devid.ssid = reipl_block_ccw->ipl_info.ccw.ssid;
devid.devno = reipl_block_ccw->ipl_info.ccw.devno;
- devid.ssid = 0;
reipl_ccw_dev(&devid);
break;
case REIPL_METHOD_CCW_VM:
@@ -1192,6 +1211,7 @@
reipl_block_ccw_init(reipl_block_ccw);
if (ipl_info.type == IPL_TYPE_CCW) {
+ reipl_block_ccw->ipl_info.ccw.ssid = ipl_ssid;
reipl_block_ccw->ipl_info.ccw.devno = ipl_devno;
reipl_block_ccw_fill_parms(reipl_block_ccw);
}
@@ -1336,9 +1356,7 @@
};
/* CCW dump device attributes */
-
-DEFINE_IPL_ATTR_RW(dump_ccw, device, "0.0.%04llx\n", "0.0.%llx\n",
- dump_block_ccw->ipl_info.ccw.devno);
+DEFINE_IPL_CCW_ATTR_RW(dump_ccw, device, dump_block_ccw->ipl_info.ccw);
static struct attribute *dump_ccw_attrs[] = {
&sys_dump_ccw_device_attr.attr,
@@ -1418,8 +1436,8 @@
switch (dump_method) {
case DUMP_METHOD_CCW_CIO:
+ devid.ssid = dump_block_ccw->ipl_info.ccw.ssid;
devid.devno = dump_block_ccw->ipl_info.ccw.devno;
- devid.ssid = 0;
reipl_ccw_dev(&devid);
break;
case DUMP_METHOD_CCW_VM:
@@ -1939,14 +1957,14 @@
ipl_info.type = get_ipl_type();
switch (ipl_info.type) {
case IPL_TYPE_CCW:
+ ipl_info.data.ccw.dev_id.ssid = ipl_ssid;
ipl_info.data.ccw.dev_id.devno = ipl_devno;
- ipl_info.data.ccw.dev_id.ssid = 0;
break;
case IPL_TYPE_FCP:
case IPL_TYPE_FCP_DUMP:
+ ipl_info.data.fcp.dev_id.ssid = 0;
ipl_info.data.fcp.dev_id.devno =
IPL_PARMBLOCK_START->ipl_info.fcp.devno;
- ipl_info.data.fcp.dev_id.ssid = 0;
ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn;
ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun;
break;
@@ -1978,6 +1996,7 @@
if (cio_get_iplinfo(&iplinfo))
return;
+ ipl_ssid = iplinfo.ssid;
ipl_devno = iplinfo.devno;
ipl_flags |= IPL_DEVNO_VALID;
if (!iplinfo.is_qdio)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 688a3aa..114ee8b 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -243,11 +243,7 @@
static inline unsigned long brk_rnd(void)
{
- /* 8MB for 32bit, 1GB for 64bit */
- if (is_32bit_task())
- return (get_random_int() & 0x7ffUL) << PAGE_SHIFT;
- else
- return (get_random_int() & 0x3ffffUL) << PAGE_SHIFT;
+ return (get_random_int() & BRK_RND_MASK) << PAGE_SHIFT;
}
unsigned long arch_randomize_brk(struct mm_struct *mm)
diff --git a/arch/s390/kernel/sclp.c b/arch/s390/kernel/sclp.c
index fa0bdff..9fe7781 100644
--- a/arch/s390/kernel/sclp.c
+++ b/arch/s390/kernel/sclp.c
@@ -21,7 +21,7 @@
__ctl_load(cr0_new, 0, 0);
psw_ext_save = S390_lowcore.external_new_psw;
- psw_mask = __extract_psw() & (PSW_MASK_EA | PSW_MASK_BA);
+ psw_mask = __extract_psw();
S390_lowcore.external_new_psw.mask = psw_mask;
psw_wait.mask = psw_mask | PSW_MASK_EXT | PSW_MASK_WAIT;
S390_lowcore.ext_int_code = 0;
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ce0cbd6..c837bca 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -764,9 +764,6 @@
get_cpu_id(&cpu_id);
add_device_randomness(&cpu_id, sizeof(cpu_id));
switch (cpu_id.machine) {
- case 0x9672:
- strcpy(elf_platform, "g5");
- break;
case 0x2064:
case 0x2066:
default: /* Use "z900" as default for 64 bit kernels. */
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 8c56929..5378c3e 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -382,3 +382,4 @@
SYSCALL(sys_recvfrom,compat_sys_recvfrom)
SYSCALL(sys_recvmsg,compat_sys_recvmsg)
SYSCALL(sys_shutdown,sys_shutdown)
+SYSCALL(sys_mlock2,compat_sys_mlock2)
diff --git a/arch/s390/kernel/trace.c b/arch/s390/kernel/trace.c
index 73239bb..21a5df9 100644
--- a/arch/s390/kernel/trace.c
+++ b/arch/s390/kernel/trace.c
@@ -9,11 +9,11 @@
#define CREATE_TRACE_POINTS
#include <asm/trace/diag.h>
-EXPORT_TRACEPOINT_SYMBOL(diagnose);
+EXPORT_TRACEPOINT_SYMBOL(s390_diagnose);
static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
-void trace_diagnose_norecursion(int diag_nr)
+void trace_s390_diagnose_norecursion(int diag_nr)
{
unsigned long flags;
unsigned int *depth;
@@ -22,7 +22,7 @@
depth = this_cpu_ptr(&diagnose_trace_depth);
if (*depth == 0) {
(*depth)++;
- trace_diagnose(diag_nr);
+ trace_s390_diagnose(diag_nr);
(*depth)--;
}
local_irq_restore(flags);
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 373e323..6a75352 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -1030,8 +1030,7 @@
src_id, 0);
/* sending vcpu invalid */
- if (src_id >= KVM_MAX_VCPUS ||
- kvm_get_vcpu(vcpu->kvm, src_id) == NULL)
+ if (kvm_get_vcpu_by_id(vcpu->kvm, src_id) == NULL)
return -EINVAL;
if (sclp.has_sigpif)
@@ -1110,6 +1109,10 @@
trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_EMERGENCY,
irq->u.emerg.code, 0);
+ /* sending vcpu invalid */
+ if (kvm_get_vcpu_by_id(vcpu->kvm, irq->u.emerg.code) == NULL)
+ return -EINVAL;
+
set_bit(irq->u.emerg.code, li->sigp_emerg_pending);
set_bit(IRQ_PEND_EXT_EMERGENCY, &li->pending_irqs);
atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 8fe2f1c..8465892 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -342,12 +342,16 @@
r = 0;
break;
case KVM_CAP_S390_VECTOR_REGISTERS:
- if (MACHINE_HAS_VX) {
+ mutex_lock(&kvm->lock);
+ if (atomic_read(&kvm->online_vcpus)) {
+ r = -EBUSY;
+ } else if (MACHINE_HAS_VX) {
set_kvm_facility(kvm->arch.model.fac->mask, 129);
set_kvm_facility(kvm->arch.model.fac->list, 129);
r = 0;
} else
r = -EINVAL;
+ mutex_unlock(&kvm->lock);
VM_EVENT(kvm, 3, "ENABLE: CAP_S390_VECTOR_REGISTERS %s",
r ? "(not available)" : "(success)");
break;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 77191b8..d76b51c 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -660,7 +660,7 @@
kvm_s390_get_regs_rre(vcpu, ®1, ®2);
- if (!MACHINE_HAS_PFMF)
+ if (!test_kvm_facility(vcpu->kvm, 8))
return kvm_s390_inject_program_int(vcpu, PGM_OPERATION);
if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index da690b6..77c22d6 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -291,12 +291,8 @@
u16 cpu_addr, u32 parameter, u64 *status_reg)
{
int rc;
- struct kvm_vcpu *dst_vcpu;
+ struct kvm_vcpu *dst_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
- if (cpu_addr >= KVM_MAX_VCPUS)
- return SIGP_CC_NOT_OPERATIONAL;
-
- dst_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr);
if (!dst_vcpu)
return SIGP_CC_NOT_OPERATIONAL;
@@ -478,7 +474,7 @@
trace_kvm_s390_handle_sigp_pei(vcpu, order_code, cpu_addr);
if (order_code == SIGP_EXTERNAL_CALL) {
- dest_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr);
+ dest_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
BUG_ON(dest_vcpu == NULL);
kvm_s390_vcpu_wakeup(dest_vcpu);
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index c3c07d3..c722400 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -48,37 +48,13 @@
static void __init setup_zero_pages(void)
{
- struct cpuid cpu_id;
unsigned int order;
struct page *page;
int i;
- get_cpu_id(&cpu_id);
- switch (cpu_id.machine) {
- case 0x9672: /* g5 */
- case 0x2064: /* z900 */
- case 0x2066: /* z900 */
- case 0x2084: /* z990 */
- case 0x2086: /* z990 */
- case 0x2094: /* z9-109 */
- case 0x2096: /* z9-109 */
- order = 0;
- break;
- case 0x2097: /* z10 */
- case 0x2098: /* z10 */
- case 0x2817: /* z196 */
- case 0x2818: /* z196 */
- order = 2;
- break;
- case 0x2827: /* zEC12 */
- case 0x2828: /* zEC12 */
- order = 5;
- break;
- case 0x2964: /* z13 */
- default:
- order = 7;
- break;
- }
+ /* Latest machines require a mapping granularity of 512KB */
+ order = 7;
+
/* Limit number of empty zero pages for small memory sizes */
while (order > 2 && (totalram_pages >> 10) < (1UL << order))
order--;
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 6e552af..ea01477 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -31,9 +31,6 @@
#include <linux/security.h>
#include <asm/pgalloc.h>
-unsigned long mmap_rnd_mask;
-static unsigned long mmap_align_mask;
-
static unsigned long stack_maxrandom_size(void)
{
if (!(current->flags & PF_RANDOMIZE))
@@ -62,10 +59,7 @@
unsigned long arch_mmap_rnd(void)
{
- if (is_32bit_task())
- return (get_random_int() & 0x7ff) << PAGE_SHIFT;
- else
- return (get_random_int() & mmap_rnd_mask) << PAGE_SHIFT;
+ return (get_random_int() & MMAP_RND_MASK) << PAGE_SHIFT;
}
static unsigned long mmap_base_legacy(unsigned long rnd)
@@ -92,7 +86,6 @@
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
struct vm_unmapped_area_info info;
- int do_color_align;
if (len > TASK_SIZE - mmap_min_addr)
return -ENOMEM;
@@ -108,15 +101,14 @@
return addr;
}
- do_color_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_color_align = !is_32bit_task();
-
info.flags = 0;
info.length = len;
info.low_limit = mm->mmap_base;
info.high_limit = TASK_SIZE;
- info.align_mask = do_color_align ? (mmap_align_mask << PAGE_SHIFT) : 0;
+ if (filp || (flags & MAP_SHARED))
+ info.align_mask = MMAP_ALIGN_MASK << PAGE_SHIFT;
+ else
+ info.align_mask = 0;
info.align_offset = pgoff << PAGE_SHIFT;
return vm_unmapped_area(&info);
}
@@ -130,7 +122,6 @@
struct mm_struct *mm = current->mm;
unsigned long addr = addr0;
struct vm_unmapped_area_info info;
- int do_color_align;
/* requested length too big for entire address space */
if (len > TASK_SIZE - mmap_min_addr)
@@ -148,15 +139,14 @@
return addr;
}
- do_color_align = 0;
- if (filp || (flags & MAP_SHARED))
- do_color_align = !is_32bit_task();
-
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = max(PAGE_SIZE, mmap_min_addr);
info.high_limit = mm->mmap_base;
- info.align_mask = do_color_align ? (mmap_align_mask << PAGE_SHIFT) : 0;
+ if (filp || (flags & MAP_SHARED))
+ info.align_mask = MMAP_ALIGN_MASK << PAGE_SHIFT;
+ else
+ info.align_mask = 0;
info.align_offset = pgoff << PAGE_SHIFT;
addr = vm_unmapped_area(&info);
@@ -254,35 +244,3 @@
mm->get_unmapped_area = s390_get_unmapped_area_topdown;
}
}
-
-static int __init setup_mmap_rnd(void)
-{
- struct cpuid cpu_id;
-
- get_cpu_id(&cpu_id);
- switch (cpu_id.machine) {
- case 0x9672:
- case 0x2064:
- case 0x2066:
- case 0x2084:
- case 0x2086:
- case 0x2094:
- case 0x2096:
- case 0x2097:
- case 0x2098:
- case 0x2817:
- case 0x2818:
- case 0x2827:
- case 0x2828:
- mmap_rnd_mask = 0x7ffUL;
- mmap_align_mask = 0UL;
- break;
- case 0x2964: /* z13 */
- default:
- mmap_rnd_mask = 0x3ff80UL;
- mmap_align_mask = 0x7fUL;
- break;
- }
- return 0;
-}
-early_initcall(setup_mmap_rnd);
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
index 37d10f7..d348f2c 100644
--- a/arch/s390/pci/pci_dma.c
+++ b/arch/s390/pci/pci_dma.c
@@ -33,7 +33,7 @@
return NULL;
for (entry = table; entry < table + ZPCI_TABLE_ENTRIES; entry++)
- *entry = ZPCI_TABLE_INVALID | ZPCI_TABLE_PROTECTED;
+ *entry = ZPCI_TABLE_INVALID;
return table;
}
@@ -51,7 +51,7 @@
return NULL;
for (entry = table; entry < table + ZPCI_PT_ENTRIES; entry++)
- *entry = ZPCI_PTE_INVALID | ZPCI_TABLE_PROTECTED;
+ *entry = ZPCI_PTE_INVALID;
return table;
}
@@ -95,7 +95,7 @@
return pto;
}
-static unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr)
+unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr)
{
unsigned long *sto, *pto;
unsigned int rtx, sx, px;
@@ -114,20 +114,10 @@
return &pto[px];
}
-void dma_update_cpu_trans(unsigned long *dma_table, void *page_addr,
- dma_addr_t dma_addr, int flags)
+void dma_update_cpu_trans(unsigned long *entry, void *page_addr, int flags)
{
- unsigned long *entry;
-
- entry = dma_walk_cpu_trans(dma_table, dma_addr);
- if (!entry) {
- WARN_ON_ONCE(1);
- return;
- }
-
if (flags & ZPCI_PTE_INVALID) {
invalidate_pt_entry(entry);
- return;
} else {
set_pt_pfaa(entry, page_addr);
validate_pt_entry(entry);
@@ -146,18 +136,25 @@
u8 *page_addr = (u8 *) (pa & PAGE_MASK);
dma_addr_t start_dma_addr = dma_addr;
unsigned long irq_flags;
+ unsigned long *entry;
int i, rc = 0;
if (!nr_pages)
return -EINVAL;
spin_lock_irqsave(&zdev->dma_table_lock, irq_flags);
- if (!zdev->dma_table)
+ if (!zdev->dma_table) {
+ rc = -EINVAL;
goto no_refresh;
+ }
for (i = 0; i < nr_pages; i++) {
- dma_update_cpu_trans(zdev->dma_table, page_addr, dma_addr,
- flags);
+ entry = dma_walk_cpu_trans(zdev->dma_table, dma_addr);
+ if (!entry) {
+ rc = -ENOMEM;
+ goto undo_cpu_trans;
+ }
+ dma_update_cpu_trans(entry, page_addr, flags);
page_addr += PAGE_SIZE;
dma_addr += PAGE_SIZE;
}
@@ -176,6 +173,18 @@
rc = zpci_refresh_trans((u64) zdev->fh << 32, start_dma_addr,
nr_pages * PAGE_SIZE);
+undo_cpu_trans:
+ if (rc && ((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID)) {
+ flags = ZPCI_PTE_INVALID;
+ while (i-- > 0) {
+ page_addr -= PAGE_SIZE;
+ dma_addr -= PAGE_SIZE;
+ entry = dma_walk_cpu_trans(zdev->dma_table, dma_addr);
+ if (!entry)
+ break;
+ dma_update_cpu_trans(entry, page_addr, flags);
+ }
+ }
no_refresh:
spin_unlock_irqrestore(&zdev->dma_table_lock, irq_flags);
@@ -260,6 +269,16 @@
spin_unlock_irqrestore(&zdev->iommu_bitmap_lock, flags);
}
+static inline void zpci_err_dma(unsigned long rc, unsigned long addr)
+{
+ struct {
+ unsigned long rc;
+ unsigned long addr;
+ } __packed data = {rc, addr};
+
+ zpci_err_hex(&data, sizeof(data));
+}
+
static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction,
@@ -270,33 +289,40 @@
unsigned long pa = page_to_phys(page) + offset;
int flags = ZPCI_PTE_VALID;
dma_addr_t dma_addr;
+ int ret;
/* This rounds up number of pages based on size and offset */
nr_pages = iommu_num_pages(pa, size, PAGE_SIZE);
iommu_page_index = dma_alloc_iommu(zdev, nr_pages);
- if (iommu_page_index == -1)
+ if (iommu_page_index == -1) {
+ ret = -ENOSPC;
goto out_err;
+ }
/* Use rounded up size */
size = nr_pages * PAGE_SIZE;
dma_addr = zdev->start_dma + iommu_page_index * PAGE_SIZE;
- if (dma_addr + size > zdev->end_dma)
+ if (dma_addr + size > zdev->end_dma) {
+ ret = -ERANGE;
goto out_free;
+ }
if (direction == DMA_NONE || direction == DMA_TO_DEVICE)
flags |= ZPCI_TABLE_PROTECTED;
- if (!dma_update_trans(zdev, pa, dma_addr, size, flags)) {
- atomic64_add(nr_pages, &zdev->mapped_pages);
- return dma_addr + (offset & ~PAGE_MASK);
- }
+ ret = dma_update_trans(zdev, pa, dma_addr, size, flags);
+ if (ret)
+ goto out_free;
+
+ atomic64_add(nr_pages, &zdev->mapped_pages);
+ return dma_addr + (offset & ~PAGE_MASK);
out_free:
dma_free_iommu(zdev, iommu_page_index, nr_pages);
out_err:
zpci_err("map error:\n");
- zpci_err_hex(&pa, sizeof(pa));
+ zpci_err_dma(ret, pa);
return DMA_ERROR_CODE;
}
@@ -306,14 +332,16 @@
{
struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
unsigned long iommu_page_index;
- int npages;
+ int npages, ret;
npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
dma_addr = dma_addr & PAGE_MASK;
- if (dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE,
- ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID)) {
+ ret = dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE,
+ ZPCI_PTE_INVALID);
+ if (ret) {
zpci_err("unmap error:\n");
- zpci_err_hex(&dma_addr, sizeof(dma_addr));
+ zpci_err_dma(ret, dma_addr);
+ return;
}
atomic64_add(npages, &zdev->unmapped_pages);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 9f39056..690b402 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -35,7 +35,7 @@
#define MSR_IA32_PERFCTR0 0x000000c1
#define MSR_IA32_PERFCTR1 0x000000c2
#define MSR_FSB_FREQ 0x000000cd
-#define MSR_NHM_PLATFORM_INFO 0x000000ce
+#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
#define NHM_C3_AUTO_DEMOTE (1UL << 25)
@@ -44,7 +44,6 @@
#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
-#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
#define MSR_IA32_BBL_CR_CTL3 0x0000011e
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4ddd780..c2b7522 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -273,10 +273,9 @@
static __always_inline void setup_smap(struct cpuinfo_x86 *c)
{
- unsigned long eflags;
+ unsigned long eflags = native_save_fl();
/* This should have been cleared long ago */
- raw_local_save_flags(eflags);
BUG_ON(eflags & X86_EFLAGS_AC);
if (cpu_has(c, X86_FEATURE_SMAP)) {
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index ef29b74..31c6a60 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -385,20 +385,19 @@
*/
void fpu__init_prepare_fx_sw_frame(void)
{
- int fsave_header_size = sizeof(struct fregs_state);
int size = xstate_size + FP_XSTATE_MAGIC2_SIZE;
- if (config_enabled(CONFIG_X86_32))
- size += fsave_header_size;
-
fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
fx_sw_reserved.extended_size = size;
fx_sw_reserved.xfeatures = xfeatures_mask;
fx_sw_reserved.xstate_size = xstate_size;
- if (config_enabled(CONFIG_IA32_EMULATION)) {
+ if (config_enabled(CONFIG_IA32_EMULATION) ||
+ config_enabled(CONFIG_X86_32)) {
+ int fsave_header_size = sizeof(struct fregs_state);
+
fx_sw_reserved_ia32 = fx_sw_reserved;
- fx_sw_reserved_ia32.extended_size += fsave_header_size;
+ fx_sw_reserved_ia32.extended_size = size + fsave_header_size;
}
}
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 6454f27..70fc312 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -694,7 +694,6 @@
if (!boot_cpu_has(X86_FEATURE_XSAVE))
return NULL;
- xsave = ¤t->thread.fpu.state.xsave;
/*
* We should not ever be requesting features that we
* have not enabled. Remember that pcntxt_mask is
diff --git a/arch/x86/kernel/mcount_64.S b/arch/x86/kernel/mcount_64.S
index 94ea120..87e1762 100644
--- a/arch/x86/kernel/mcount_64.S
+++ b/arch/x86/kernel/mcount_64.S
@@ -278,6 +278,12 @@
/* save_mcount_regs fills in first two parameters */
save_mcount_regs
+ /*
+ * When DYNAMIC_FTRACE is not defined, ARCH_SUPPORTS_FTRACE_OPS is not
+ * set (see include/asm/ftrace.h and include/linux/ftrace.h). Only the
+ * ip and parent ip are used and the list function is called when
+ * function tracing is enabled.
+ */
call *ftrace_trace_function
restore_mcount_regs
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 87acc52..af823a3 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -7394,11 +7394,6 @@
switch (type) {
case VMX_VPID_EXTENT_ALL_CONTEXT:
- if (get_vmcs12(vcpu)->virtual_processor_id == 0) {
- nested_vmx_failValid(vcpu,
- VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
- return 1;
- }
__vmx_flush_tlb(vcpu, to_vmx(vcpu)->nested.vpid02);
nested_vmx_succeed(vcpu);
break;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 00462bd..eed3228 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2763,6 +2763,26 @@
return 0;
}
+static int kvm_cpu_accept_dm_intr(struct kvm_vcpu *vcpu)
+{
+ return (!lapic_in_kernel(vcpu) ||
+ kvm_apic_accept_pic_intr(vcpu));
+}
+
+/*
+ * if userspace requested an interrupt window, check that the
+ * interrupt window is open.
+ *
+ * No need to exit to userspace if we already have an interrupt queued.
+ */
+static int kvm_vcpu_ready_for_interrupt_injection(struct kvm_vcpu *vcpu)
+{
+ return kvm_arch_interrupt_allowed(vcpu) &&
+ !kvm_cpu_has_interrupt(vcpu) &&
+ !kvm_event_needs_reinjection(vcpu) &&
+ kvm_cpu_accept_dm_intr(vcpu);
+}
+
static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
struct kvm_interrupt *irq)
{
@@ -2786,6 +2806,7 @@
return -EEXIST;
vcpu->arch.pending_external_vector = irq->irq;
+ kvm_make_request(KVM_REQ_EVENT, vcpu);
return 0;
}
@@ -5910,23 +5931,10 @@
return emulator_write_emulated(ctxt, rip, instruction, 3, NULL);
}
-/*
- * Check if userspace requested an interrupt window, and that the
- * interrupt window is open.
- *
- * No need to exit to userspace if we already have an interrupt queued.
- */
static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu)
{
- if (!vcpu->run->request_interrupt_window || pic_in_kernel(vcpu->kvm))
- return false;
-
- if (kvm_cpu_has_interrupt(vcpu))
- return false;
-
- return (irqchip_split(vcpu->kvm)
- ? kvm_apic_accept_pic_intr(vcpu)
- : kvm_arch_interrupt_allowed(vcpu));
+ return vcpu->run->request_interrupt_window &&
+ likely(!pic_in_kernel(vcpu->kvm));
}
static void post_kvm_run_save(struct kvm_vcpu *vcpu)
@@ -5937,17 +5945,9 @@
kvm_run->flags = is_smm(vcpu) ? KVM_RUN_X86_SMM : 0;
kvm_run->cr8 = kvm_get_cr8(vcpu);
kvm_run->apic_base = kvm_get_apic_base(vcpu);
- if (!irqchip_in_kernel(vcpu->kvm))
- kvm_run->ready_for_interrupt_injection =
- kvm_arch_interrupt_allowed(vcpu) &&
- !kvm_cpu_has_interrupt(vcpu) &&
- !kvm_event_needs_reinjection(vcpu);
- else if (!pic_in_kernel(vcpu->kvm))
- kvm_run->ready_for_interrupt_injection =
- kvm_apic_accept_pic_intr(vcpu) &&
- !kvm_cpu_has_interrupt(vcpu);
- else
- kvm_run->ready_for_interrupt_injection = 1;
+ kvm_run->ready_for_interrupt_injection =
+ pic_in_kernel(vcpu->kvm) ||
+ kvm_vcpu_ready_for_interrupt_injection(vcpu);
}
static void update_cr8_intercept(struct kvm_vcpu *vcpu)
@@ -6360,8 +6360,10 @@
static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
{
int r;
- bool req_int_win = !lapic_in_kernel(vcpu) &&
- vcpu->run->request_interrupt_window;
+ bool req_int_win =
+ dm_request_for_irq_injection(vcpu) &&
+ kvm_cpu_accept_dm_intr(vcpu);
+
bool req_immediate_exit = false;
if (vcpu->requests) {
@@ -6663,7 +6665,8 @@
if (kvm_cpu_has_pending_timer(vcpu))
kvm_inject_pending_timer_irqs(vcpu);
- if (dm_request_for_irq_injection(vcpu)) {
+ if (dm_request_for_irq_injection(vcpu) &&
+ kvm_vcpu_ready_for_interrupt_injection(vcpu)) {
r = 0;
vcpu->run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
++vcpu->stat.request_irq_exits;
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index b0ae85f..1202d5c 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -586,6 +586,29 @@
}
/*
+ * We only want to do a 4-byte get_user() on 32-bit. Otherwise,
+ * we might run off the end of the bounds table if we are on
+ * a 64-bit kernel and try to get 8 bytes.
+ */
+int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
+ long __user *bd_entry_ptr)
+{
+ u32 bd_entry_32;
+ int ret;
+
+ if (is_64bit_mm(mm))
+ return get_user(*bd_entry_ret, bd_entry_ptr);
+
+ /*
+ * Note that get_user() uses the type of the *pointer* to
+ * establish the size of the get, not the destination.
+ */
+ ret = get_user(bd_entry_32, (u32 __user *)bd_entry_ptr);
+ *bd_entry_ret = bd_entry_32;
+ return ret;
+}
+
+/*
* Get the base of bounds tables pointed by specific bounds
* directory entry.
*/
@@ -605,7 +628,7 @@
int need_write = 0;
pagefault_disable();
- ret = get_user(bd_entry, bd_entry_ptr);
+ ret = get_user_bd_entry(mm, &bd_entry, bd_entry_ptr);
pagefault_enable();
if (!ret)
break;
@@ -700,11 +723,23 @@
*/
static inline unsigned long bd_entry_virt_space(struct mm_struct *mm)
{
- unsigned long long virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
- if (is_64bit_mm(mm))
- return virt_space / MPX_BD_NR_ENTRIES_64;
- else
- return virt_space / MPX_BD_NR_ENTRIES_32;
+ unsigned long long virt_space;
+ unsigned long long GB = (1ULL << 30);
+
+ /*
+ * This covers 32-bit emulation as well as 32-bit kernels
+ * running on 64-bit harware.
+ */
+ if (!is_64bit_mm(mm))
+ return (4ULL * GB) / MPX_BD_NR_ENTRIES_32;
+
+ /*
+ * 'x86_virt_bits' returns what the hardware is capable
+ * of, and returns the full >32-bit adddress space when
+ * running 32-bit kernels on 64-bit hardware.
+ */
+ virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
+ return virt_space / MPX_BD_NR_ENTRIES_64;
}
/*
diff --git a/block/blk-merge.c b/block/blk-merge.c
index de5716d8..41a55ba 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -76,6 +76,9 @@
struct bio_vec bv, bvprv, *bvprvp = NULL;
struct bvec_iter iter;
unsigned seg_size = 0, nsegs = 0, sectors = 0;
+ unsigned front_seg_size = bio->bi_seg_front_size;
+ bool do_split = true;
+ struct bio *new = NULL;
bio_for_each_segment(bv, bio, iter) {
if (sectors + (bv.bv_len >> 9) > queue_max_sectors(q))
@@ -98,7 +101,7 @@
seg_size += bv.bv_len;
bvprv = bv;
- bvprvp = &bv;
+ bvprvp = &bvprv;
sectors += bv.bv_len >> 9;
continue;
}
@@ -108,16 +111,29 @@
nsegs++;
bvprv = bv;
- bvprvp = &bv;
+ bvprvp = &bvprv;
seg_size = bv.bv_len;
sectors += bv.bv_len >> 9;
+
+ if (nsegs == 1 && seg_size > front_seg_size)
+ front_seg_size = seg_size;
}
- *segs = nsegs;
- return NULL;
+ do_split = false;
split:
*segs = nsegs;
- return bio_split(bio, sectors, GFP_NOIO, bs);
+
+ if (do_split) {
+ new = bio_split(bio, sectors, GFP_NOIO, bs);
+ if (new)
+ bio = new;
+ }
+
+ bio->bi_seg_front_size = front_seg_size;
+ if (seg_size > bio->bi_seg_back_size)
+ bio->bi_seg_back_size = seg_size;
+
+ return do_split ? new : NULL;
}
void blk_queue_split(struct request_queue *q, struct bio **bio,
@@ -412,6 +428,12 @@
if (sg)
sg_mark_end(sg);
+ /*
+ * Something must have been wrong if the figured number of
+ * segment is bigger than number of req's physical segments
+ */
+ WARN_ON(nsegs > rq->nr_phys_segments);
+
return nsegs;
}
EXPORT_SYMBOL(blk_rq_map_sg);
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 3ae09de..6d6f8fe 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1291,15 +1291,16 @@
blk_mq_bio_to_request(rq, bio);
/*
- * we do limited pluging. If bio can be merged, do merge.
+ * We do limited pluging. If the bio can be merged, do that.
* Otherwise the existing request in the plug list will be
* issued. So the plug list will have one request at most
*/
if (plug) {
/*
* The plug list might get flushed before this. If that
- * happens, same_queue_rq is invalid and plug list is empty
- **/
+ * happens, same_queue_rq is invalid and plug list is
+ * empty
+ */
if (same_queue_rq && !list_empty(&plug->mq_list)) {
old_rq = same_queue_rq;
list_del_init(&old_rq->queuelist);
@@ -1380,12 +1381,15 @@
blk_mq_bio_to_request(rq, bio);
if (!request_count)
trace_block_plug(q);
- else if (request_count >= BLK_MAX_REQUEST_COUNT) {
+
+ blk_mq_put_ctx(data.ctx);
+
+ if (request_count >= BLK_MAX_REQUEST_COUNT) {
blk_flush_plug_list(plug, false);
trace_block_plug(q);
}
+
list_add_tail(&rq->queuelist, &plug->mq_list);
- blk_mq_put_ctx(data.ctx);
return cookie;
}
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index 246dfb1..aa40aa9 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -158,11 +158,13 @@
{
if (blk_mark_rq_complete(req))
return;
- blk_delete_timer(req);
- if (req->q->mq_ops)
+
+ if (req->q->mq_ops) {
blk_mq_rq_timed_out(req, false);
- else
+ } else {
+ blk_delete_timer(req);
blk_rq_timed_out(req);
+ }
}
EXPORT_SYMBOL_GPL(blk_abort_request);
diff --git a/block/blk.h b/block/blk.h
index da722eb..c43926d 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -72,8 +72,6 @@
void __blk_queue_free_tags(struct request_queue *q);
bool __blk_end_bidi_request(struct request *rq, int error,
unsigned int nr_bytes, unsigned int bidi_bytes);
-int blk_queue_enter(struct request_queue *q, gfp_t gfp);
-void blk_queue_exit(struct request_queue *q);
void blk_freeze_queue(struct request_queue *q);
static inline void blk_queue_enter_live(struct request_queue *q)
diff --git a/block/noop-iosched.c b/block/noop-iosched.c
index 3de89d4..a163c48 100644
--- a/block/noop-iosched.c
+++ b/block/noop-iosched.c
@@ -21,10 +21,10 @@
static int noop_dispatch(struct request_queue *q, int force)
{
struct noop_data *nd = q->elevator->elevator_data;
+ struct request *rq;
- if (!list_empty(&nd->queue)) {
- struct request *rq;
- rq = list_entry(nd->queue.next, struct request, queuelist);
+ rq = list_first_entry_or_null(&nd->queue, struct request, queuelist);
+ if (rq) {
list_del_init(&rq->queuelist);
elv_dispatch_sort(q, rq);
return 1;
@@ -46,7 +46,7 @@
if (rq->queuelist.prev == &nd->queue)
return NULL;
- return list_entry(rq->queuelist.prev, struct request, queuelist);
+ return list_prev_entry(rq, queuelist);
}
static struct request *
@@ -56,7 +56,7 @@
if (rq->queuelist.next == &nd->queue)
return NULL;
- return list_entry(rq->queuelist.next, struct request, queuelist);
+ return list_next_entry(rq, queuelist);
}
static int noop_init_queue(struct request_queue *q, struct elevator_type *e)
diff --git a/block/partitions/mac.c b/block/partitions/mac.c
index c2c48ec..621317a 100644
--- a/block/partitions/mac.c
+++ b/block/partitions/mac.c
@@ -32,7 +32,7 @@
Sector sect;
unsigned char *data;
int slot, blocks_in_map;
- unsigned secsize;
+ unsigned secsize, datasize, partoffset;
#ifdef CONFIG_PPC_PMAC
int found_root = 0;
int found_root_goodness = 0;
@@ -50,10 +50,14 @@
}
secsize = be16_to_cpu(md->block_size);
put_dev_sector(sect);
- data = read_part_sector(state, secsize/512, §);
+ datasize = round_down(secsize, 512);
+ data = read_part_sector(state, datasize / 512, §);
if (!data)
return -1;
- part = (struct mac_partition *) (data + secsize%512);
+ partoffset = secsize % 512;
+ if (partoffset + sizeof(*part) > datasize)
+ return -1;
+ part = (struct mac_partition *) (data + partoffset);
if (be16_to_cpu(part->signature) != MAC_PARTITION_MAGIC) {
put_dev_sector(sect);
return 0; /* not a MacOS disk */
diff --git a/drivers/Makefile b/drivers/Makefile
index 73d0391..795d0ca 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -63,6 +63,7 @@
obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
obj-$(CONFIG_PARPORT) += parport/
+obj-$(CONFIG_NVM) += lightnvm/
obj-y += base/ block/ misc/ mfd/ nfc/
obj-$(CONFIG_LIBNVDIMM) += nvdimm/
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
@@ -70,7 +71,6 @@
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_SCSI) += scsi/
-obj-$(CONFIG_NVM) += lightnvm/
obj-y += nvme/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_TARGET_CORE) += target/
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 3c083d2..6730f96 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -304,7 +304,7 @@
static int register_pcc_channel(int pcc_subspace_idx)
{
- struct acpi_pcct_subspace *cppc_ss;
+ struct acpi_pcct_hw_reduced *cppc_ss;
unsigned int len;
if (pcc_subspace_idx >= 0) {
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index f61a7c8..b420fb4 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1103,7 +1103,7 @@
}
err_exit:
- if (result && q)
+ if (result)
acpi_ec_delete_query(q);
if (data)
*data = value;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index bf034f8..2fa8304 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -14,7 +14,6 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <linux/dmi.h>
#include "sbshc.h"
#define PREFIX "ACPI: "
@@ -30,6 +29,7 @@
u8 query_bit;
smbus_alarm_callback callback;
void *context;
+ bool done;
};
static int acpi_smbus_hc_add(struct acpi_device *device);
@@ -88,8 +88,6 @@
ACPI_SMB_ALARM_DATA = 0x26, /* 2 bytes alarm data */
};
-static bool macbook;
-
static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
{
return ec_read(hc->offset + address, data);
@@ -100,27 +98,11 @@
return ec_write(hc->offset + address, data);
}
-static inline int smb_check_done(struct acpi_smb_hc *hc)
-{
- union acpi_smb_status status = {.raw = 0};
- smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw);
- return status.fields.done && (status.fields.status == SMBUS_OK);
-}
-
static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout)
{
- if (wait_event_timeout(hc->wait, smb_check_done(hc),
- msecs_to_jiffies(timeout)))
+ if (wait_event_timeout(hc->wait, hc->done, msecs_to_jiffies(timeout)))
return 0;
- /*
- * After the timeout happens, OS will try to check the status of SMbus.
- * If the status is what OS expected, it will be regarded as the bogus
- * timeout.
- */
- if (smb_check_done(hc))
- return 0;
- else
- return -ETIME;
+ return -ETIME;
}
static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
@@ -135,8 +117,7 @@
}
mutex_lock(&hc->lock);
- if (macbook)
- udelay(5);
+ hc->done = false;
if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
goto end;
if (temp) {
@@ -235,8 +216,10 @@
if (smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw))
return 0;
/* Check if it is only a completion notify */
- if (status.fields.done)
+ if (status.fields.done && status.fields.status == SMBUS_OK) {
+ hc->done = true;
wake_up(&hc->wait);
+ }
if (!status.fields.alarm)
return 0;
mutex_lock(&hc->lock);
@@ -262,29 +245,12 @@
acpi_handle handle, acpi_ec_query_func func,
void *data);
-static int macbook_dmi_match(const struct dmi_system_id *d)
-{
- pr_debug("Detected MacBook, enabling workaround\n");
- macbook = true;
- return 0;
-}
-
-static struct dmi_system_id acpi_smbus_dmi_table[] = {
- { macbook_dmi_match, "Apple MacBook", {
- DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
- DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
- },
- { },
-};
-
static int acpi_smbus_hc_add(struct acpi_device *device)
{
int status;
unsigned long long val;
struct acpi_smb_hc *hc;
- dmi_check_system(acpi_smbus_dmi_table);
-
if (!device)
return -EINVAL;
diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index eb6e674..0d77cd6 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -68,6 +68,9 @@
struct wake_irq *wirq;
int err;
+ if (irq < 0)
+ return -EINVAL;
+
wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
if (!wirq)
return -ENOMEM;
@@ -167,6 +170,9 @@
struct wake_irq *wirq;
int err;
+ if (irq < 0)
+ return -EINVAL;
+
wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
if (!wirq)
return -ENOMEM;
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index a28a562..3457ac8 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -3810,7 +3810,6 @@
sector_t capacity;
unsigned int index = 0;
struct kobject *kobj;
- unsigned char thd_name[16];
if (dd->disk)
goto skip_create_disk; /* hw init done, before rebuild */
@@ -3958,10 +3957,9 @@
}
start_service_thread:
- sprintf(thd_name, "mtip_svc_thd_%02d", index);
dd->mtip_svc_handler = kthread_create_on_node(mtip_service_thread,
- dd, dd->numa_node, "%s",
- thd_name);
+ dd, dd->numa_node,
+ "mtip_svc_thd_%02d", index);
if (IS_ERR(dd->mtip_svc_handler)) {
dev_err(&dd->pdev->dev, "service thread failed to start\n");
diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 6255d1c..5c8ba54 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -8,6 +8,7 @@
#include <linux/slab.h>
#include <linux/blk-mq.h>
#include <linux/hrtimer.h>
+#include <linux/lightnvm.h>
struct nullb_cmd {
struct list_head list;
@@ -39,12 +40,14 @@
struct nullb_queue *queues;
unsigned int nr_queues;
+ char disk_name[DISK_NAME_LEN];
};
static LIST_HEAD(nullb_list);
static struct mutex lock;
static int null_major;
static int nullb_indexes;
+static struct kmem_cache *ppa_cache;
struct completion_queue {
struct llist_head list;
@@ -119,6 +122,10 @@
module_param(nr_devices, int, S_IRUGO);
MODULE_PARM_DESC(nr_devices, "Number of devices to register");
+static bool use_lightnvm;
+module_param(use_lightnvm, bool, S_IRUGO);
+MODULE_PARM_DESC(use_lightnvm, "Register as a LightNVM device");
+
static int irqmode = NULL_IRQ_SOFTIRQ;
static int null_set_irqmode(const char *str, const struct kernel_param *kp)
@@ -427,15 +434,156 @@
{
list_del_init(&nullb->list);
- del_gendisk(nullb->disk);
+ if (use_lightnvm)
+ nvm_unregister(nullb->disk_name);
+ else
+ del_gendisk(nullb->disk);
blk_cleanup_queue(nullb->q);
if (queue_mode == NULL_Q_MQ)
blk_mq_free_tag_set(&nullb->tag_set);
- put_disk(nullb->disk);
+ if (!use_lightnvm)
+ put_disk(nullb->disk);
cleanup_queues(nullb);
kfree(nullb);
}
+#ifdef CONFIG_NVM
+
+static void null_lnvm_end_io(struct request *rq, int error)
+{
+ struct nvm_rq *rqd = rq->end_io_data;
+ struct nvm_dev *dev = rqd->dev;
+
+ dev->mt->end_io(rqd, error);
+
+ blk_put_request(rq);
+}
+
+static int null_lnvm_submit_io(struct request_queue *q, struct nvm_rq *rqd)
+{
+ struct request *rq;
+ struct bio *bio = rqd->bio;
+
+ rq = blk_mq_alloc_request(q, bio_rw(bio), GFP_KERNEL, 0);
+ if (IS_ERR(rq))
+ return -ENOMEM;
+
+ rq->cmd_type = REQ_TYPE_DRV_PRIV;
+ rq->__sector = bio->bi_iter.bi_sector;
+ rq->ioprio = bio_prio(bio);
+
+ if (bio_has_data(bio))
+ rq->nr_phys_segments = bio_phys_segments(q, bio);
+
+ rq->__data_len = bio->bi_iter.bi_size;
+ rq->bio = rq->biotail = bio;
+
+ rq->end_io_data = rqd;
+
+ blk_execute_rq_nowait(q, NULL, rq, 0, null_lnvm_end_io);
+
+ return 0;
+}
+
+static int null_lnvm_id(struct request_queue *q, struct nvm_id *id)
+{
+ sector_t size = gb * 1024 * 1024 * 1024ULL;
+ sector_t blksize;
+ struct nvm_id_group *grp;
+
+ id->ver_id = 0x1;
+ id->vmnt = 0;
+ id->cgrps = 1;
+ id->cap = 0x3;
+ id->dom = 0x1;
+
+ id->ppaf.blk_offset = 0;
+ id->ppaf.blk_len = 16;
+ id->ppaf.pg_offset = 16;
+ id->ppaf.pg_len = 16;
+ id->ppaf.sect_offset = 32;
+ id->ppaf.sect_len = 8;
+ id->ppaf.pln_offset = 40;
+ id->ppaf.pln_len = 8;
+ id->ppaf.lun_offset = 48;
+ id->ppaf.lun_len = 8;
+ id->ppaf.ch_offset = 56;
+ id->ppaf.ch_len = 8;
+
+ do_div(size, bs); /* convert size to pages */
+ do_div(size, 256); /* concert size to pgs pr blk */
+ grp = &id->groups[0];
+ grp->mtype = 0;
+ grp->fmtype = 0;
+ grp->num_ch = 1;
+ grp->num_pg = 256;
+ blksize = size;
+ do_div(size, (1 << 16));
+ grp->num_lun = size + 1;
+ do_div(blksize, grp->num_lun);
+ grp->num_blk = blksize;
+ grp->num_pln = 1;
+
+ grp->fpg_sz = bs;
+ grp->csecs = bs;
+ grp->trdt = 25000;
+ grp->trdm = 25000;
+ grp->tprt = 500000;
+ grp->tprm = 500000;
+ grp->tbet = 1500000;
+ grp->tbem = 1500000;
+ grp->mpos = 0x010101; /* single plane rwe */
+ grp->cpar = hw_queue_depth;
+
+ return 0;
+}
+
+static void *null_lnvm_create_dma_pool(struct request_queue *q, char *name)
+{
+ mempool_t *virtmem_pool;
+
+ virtmem_pool = mempool_create_slab_pool(64, ppa_cache);
+ if (!virtmem_pool) {
+ pr_err("null_blk: Unable to create virtual memory pool\n");
+ return NULL;
+ }
+
+ return virtmem_pool;
+}
+
+static void null_lnvm_destroy_dma_pool(void *pool)
+{
+ mempool_destroy(pool);
+}
+
+static void *null_lnvm_dev_dma_alloc(struct request_queue *q, void *pool,
+ gfp_t mem_flags, dma_addr_t *dma_handler)
+{
+ return mempool_alloc(pool, mem_flags);
+}
+
+static void null_lnvm_dev_dma_free(void *pool, void *entry,
+ dma_addr_t dma_handler)
+{
+ mempool_free(entry, pool);
+}
+
+static struct nvm_dev_ops null_lnvm_dev_ops = {
+ .identity = null_lnvm_id,
+ .submit_io = null_lnvm_submit_io,
+
+ .create_dma_pool = null_lnvm_create_dma_pool,
+ .destroy_dma_pool = null_lnvm_destroy_dma_pool,
+ .dev_dma_alloc = null_lnvm_dev_dma_alloc,
+ .dev_dma_free = null_lnvm_dev_dma_free,
+
+ /* Simulate nvme protocol restriction */
+ .max_phys_sect = 64,
+};
+#else
+static struct nvm_dev_ops null_lnvm_dev_ops;
+#endif /* CONFIG_NVM */
+
static int null_open(struct block_device *bdev, fmode_t mode)
{
return 0;
@@ -575,11 +723,6 @@
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, nullb->q);
queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, nullb->q);
- disk = nullb->disk = alloc_disk_node(1, home_node);
- if (!disk) {
- rv = -ENOMEM;
- goto out_cleanup_blk_queue;
- }
mutex_lock(&lock);
list_add_tail(&nullb->list, &nullb_list);
@@ -589,6 +732,21 @@
blk_queue_logical_block_size(nullb->q, bs);
blk_queue_physical_block_size(nullb->q, bs);
+ sprintf(nullb->disk_name, "nullb%d", nullb->index);
+
+ if (use_lightnvm) {
+ rv = nvm_register(nullb->q, nullb->disk_name,
+ &null_lnvm_dev_ops);
+ if (rv)
+ goto out_cleanup_blk_queue;
+ goto done;
+ }
+
+ disk = nullb->disk = alloc_disk_node(1, home_node);
+ if (!disk) {
+ rv = -ENOMEM;
+ goto out_cleanup_lightnvm;
+ }
size = gb * 1024 * 1024 * 1024ULL;
set_capacity(disk, size >> 9);
@@ -598,10 +756,15 @@
disk->fops = &null_fops;
disk->private_data = nullb;
disk->queue = nullb->q;
- sprintf(disk->disk_name, "nullb%d", nullb->index);
+ strncpy(disk->disk_name, nullb->disk_name, DISK_NAME_LEN);
+
add_disk(disk);
+done:
return 0;
+out_cleanup_lightnvm:
+ if (use_lightnvm)
+ nvm_unregister(nullb->disk_name);
out_cleanup_blk_queue:
blk_cleanup_queue(nullb->q);
out_cleanup_tags:
@@ -625,6 +788,18 @@
bs = PAGE_SIZE;
}
+ if (use_lightnvm && bs != 4096) {
+ pr_warn("null_blk: LightNVM only supports 4k block size\n");
+ pr_warn("null_blk: defaults block size to 4k\n");
+ bs = 4096;
+ }
+
+ if (use_lightnvm && queue_mode != NULL_Q_MQ) {
+ pr_warn("null_blk: LightNVM only supported for blk-mq\n");
+ pr_warn("null_blk: defaults queue mode to blk-mq\n");
+ queue_mode = NULL_Q_MQ;
+ }
+
if (queue_mode == NULL_Q_MQ && use_per_node_hctx) {
if (submit_queues < nr_online_nodes) {
pr_warn("null_blk: submit_queues param is set to %u.",
@@ -655,15 +830,27 @@
if (null_major < 0)
return null_major;
+ if (use_lightnvm) {
+ ppa_cache = kmem_cache_create("ppa_cache", 64 * sizeof(u64),
+ 0, 0, NULL);
+ if (!ppa_cache) {
+ pr_err("null_blk: unable to create ppa cache\n");
+ return -ENOMEM;
+ }
+ }
+
for (i = 0; i < nr_devices; i++) {
if (null_add_dev()) {
unregister_blkdev(null_major, "nullb");
- return -EINVAL;
+ goto err_ppa;
}
}
pr_info("null: module loaded\n");
return 0;
+err_ppa:
+ kmem_cache_destroy(ppa_cache);
+ return -EINVAL;
}
static void __exit null_exit(void)
@@ -678,6 +865,8 @@
null_del_dev(nullb);
}
mutex_unlock(&lock);
+
+ kmem_cache_destroy(ppa_cache);
}
module_init(null_init);
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index 9f18569..bf500e0 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -117,7 +117,7 @@
module_platform_driver(omap_ocp2scp_driver);
-MODULE_ALIAS("platform: omap-ocp2scp");
+MODULE_ALIAS("platform:omap-ocp2scp");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_DESCRIPTION("OMAP OCP2SCP driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 654f6f3..55fe902 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -412,18 +412,42 @@
return rv;
}
-static void start_check_enables(struct smi_info *smi_info)
+static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
+{
+ smi_info->last_timeout_jiffies = jiffies;
+ mod_timer(&smi_info->si_timer, new_val);
+ smi_info->timer_running = true;
+}
+
+/*
+ * Start a new message and (re)start the timer and thread.
+ */
+static void start_new_msg(struct smi_info *smi_info, unsigned char *msg,
+ unsigned int size)
+{
+ smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
+ if (smi_info->thread)
+ wake_up_process(smi_info->thread);
+
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, size);
+}
+
+static void start_check_enables(struct smi_info *smi_info, bool start_timer)
{
unsigned char msg[2];
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+ if (start_timer)
+ start_new_msg(smi_info, msg, 2);
+ else
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
smi_info->si_state = SI_CHECKING_ENABLES;
}
-static void start_clear_flags(struct smi_info *smi_info)
+static void start_clear_flags(struct smi_info *smi_info, bool start_timer)
{
unsigned char msg[3];
@@ -432,7 +456,10 @@
msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
msg[2] = WDT_PRE_TIMEOUT_INT;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+ if (start_timer)
+ start_new_msg(smi_info, msg, 3);
+ else
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
smi_info->si_state = SI_CLEARING_FLAGS;
}
@@ -442,10 +469,8 @@
smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD;
smi_info->curr_msg->data_size = 2;
- smi_info->handlers->start_transaction(
- smi_info->si_sm,
- smi_info->curr_msg->data,
- smi_info->curr_msg->data_size);
+ start_new_msg(smi_info, smi_info->curr_msg->data,
+ smi_info->curr_msg->data_size);
smi_info->si_state = SI_GETTING_MESSAGES;
}
@@ -455,20 +480,11 @@
smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
smi_info->curr_msg->data_size = 2;
- smi_info->handlers->start_transaction(
- smi_info->si_sm,
- smi_info->curr_msg->data,
- smi_info->curr_msg->data_size);
+ start_new_msg(smi_info, smi_info->curr_msg->data,
+ smi_info->curr_msg->data_size);
smi_info->si_state = SI_GETTING_EVENTS;
}
-static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
-{
- smi_info->last_timeout_jiffies = jiffies;
- mod_timer(&smi_info->si_timer, new_val);
- smi_info->timer_running = true;
-}
-
/*
* When we have a situtaion where we run out of memory and cannot
* allocate messages, we just leave them in the BMC and run the system
@@ -478,11 +494,11 @@
* Note that we cannot just use disable_irq(), since the interrupt may
* be shared.
*/
-static inline bool disable_si_irq(struct smi_info *smi_info)
+static inline bool disable_si_irq(struct smi_info *smi_info, bool start_timer)
{
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
smi_info->interrupt_disabled = true;
- start_check_enables(smi_info);
+ start_check_enables(smi_info, start_timer);
return true;
}
return false;
@@ -492,7 +508,7 @@
{
if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
smi_info->interrupt_disabled = false;
- start_check_enables(smi_info);
+ start_check_enables(smi_info, true);
return true;
}
return false;
@@ -510,7 +526,7 @@
msg = ipmi_alloc_smi_msg();
if (!msg) {
- if (!disable_si_irq(smi_info))
+ if (!disable_si_irq(smi_info, true))
smi_info->si_state = SI_NORMAL;
} else if (enable_si_irq(smi_info)) {
ipmi_free_smi_msg(msg);
@@ -526,7 +542,7 @@
/* Watchdog pre-timeout */
smi_inc_stat(smi_info, watchdog_pretimeouts);
- start_clear_flags(smi_info);
+ start_clear_flags(smi_info, true);
smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
if (smi_info->intf)
ipmi_smi_watchdog_pretimeout(smi_info->intf);
@@ -879,8 +895,7 @@
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_MSG_FLAGS_CMD;
- smi_info->handlers->start_transaction(
- smi_info->si_sm, msg, 2);
+ start_new_msg(smi_info, msg, 2);
smi_info->si_state = SI_GETTING_FLAGS;
goto restart;
}
@@ -910,7 +925,7 @@
* disable and messages disabled.
*/
if (smi_info->supports_event_msg_buff || smi_info->irq) {
- start_check_enables(smi_info);
+ start_check_enables(smi_info, true);
} else {
smi_info->curr_msg = alloc_msg_handle_irq(smi_info);
if (!smi_info->curr_msg)
@@ -920,6 +935,13 @@
}
goto restart;
}
+
+ if (si_sm_result == SI_SM_IDLE && smi_info->timer_running) {
+ /* Ok it if fails, the timer will just go off. */
+ if (del_timer(&smi_info->si_timer))
+ smi_info->timer_running = false;
+ }
+
out:
return si_sm_result;
}
@@ -2560,6 +2582,7 @@
.data = (void *)(unsigned long) SI_BT },
{},
};
+MODULE_DEVICE_TABLE(of, of_ipmi_match);
static int of_ipmi_probe(struct platform_device *dev)
{
@@ -2646,7 +2669,6 @@
}
return 0;
}
-MODULE_DEVICE_TABLE(of, of_ipmi_match);
#else
#define of_ipmi_match NULL
static int of_ipmi_probe(struct platform_device *dev)
@@ -3613,7 +3635,7 @@
* Start clearing the flags before we enable interrupts or the
* timer to avoid racing with the timer.
*/
- start_clear_flags(new_smi);
+ start_clear_flags(new_smi, false);
/*
* IRQ is defined to be set when non-zero. req_events will
@@ -3908,7 +3930,7 @@
poll(to_clean);
schedule_timeout_uninterruptible(1);
}
- disable_si_irq(to_clean);
+ disable_si_irq(to_clean, false);
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
poll(to_clean);
schedule_timeout_uninterruptible(1);
diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c
index 0ac3bd1..096f0ce 100644
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -153,6 +153,9 @@
/* The pre-timeout is disabled by default. */
static int pretimeout;
+/* Default timeout to set on panic */
+static int panic_wdt_timeout = 255;
+
/* Default action is to reset the board on a timeout. */
static unsigned char action_val = WDOG_TIMEOUT_RESET;
@@ -293,6 +296,9 @@
module_param(pretimeout, timeout, 0644);
MODULE_PARM_DESC(pretimeout, "Pretimeout value in seconds.");
+module_param(panic_wdt_timeout, timeout, 0644);
+MODULE_PARM_DESC(timeout, "Timeout value on kernel panic in seconds.");
+
module_param_cb(action, ¶m_ops_str, action_op, 0644);
MODULE_PARM_DESC(action, "Timeout action. One of: "
"reset, none, power_cycle, power_off.");
@@ -1189,7 +1195,7 @@
/* Make sure we do this only once. */
panic_event_handled = 1;
- timeout = 255;
+ timeout = panic_wdt_timeout;
pretimeout = 0;
panic_halt_ipmi_set_timeout();
}
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 85260fb..f287845 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -1,3 +1,13 @@
+config CLK_BCM_63XX
+ bool "Broadcom BCM63xx clock support"
+ depends on ARCH_BCM_63XX || COMPILE_TEST
+ depends on COMMON_CLK
+ select COMMON_CLK_IPROC
+ default ARCH_BCM_63XX
+ help
+ Enable common clock framework support for Broadcom BCM63xx DSL SoCs
+ based on the ARM architecture
+
config CLK_BCM_KONA
bool "Broadcom Kona CCU clock support"
depends on ARCH_BCM_MOBILE || COMPILE_TEST
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 3fc9506..247c267 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLK_BCM_63XX) += clk-bcm63xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
diff --git a/drivers/clk/bcm/clk-bcm63xx.c b/drivers/clk/bcm/clk-bcm63xx.c
new file mode 100644
index 0000000..fbc17ae
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm63xx.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include "clk-iproc.h"
+
+static void __init bcm63138_armpll_init(struct device_node *node)
+{
+ iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(bcm63138_armpll, "brcm,bcm63138-armpll", bcm63138_armpll_init);
diff --git a/drivers/clk/imx/clk-imx25.c b/drivers/clk/imx/clk-imx25.c
index c4c141c..23686f7 100644
--- a/drivers/clk/imx/clk-imx25.c
+++ b/drivers/clk/imx/clk-imx25.c
@@ -96,13 +96,11 @@
NULL
};
-static int __init __mx25_clocks_init(unsigned long osc_rate,
- void __iomem *ccm_base)
+static int __init __mx25_clocks_init(void __iomem *ccm_base)
{
BUG_ON(!ccm_base);
clk[dummy] = imx_clk_fixed("dummy", 0);
- clk[osc] = imx_clk_fixed("osc", osc_rate);
clk[mpll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "mpll", "osc", ccm(CCM_MPCTL));
clk[upll] = imx_clk_pllv1(IMX_PLLV1_IMX25, "upll", "osc", ccm(CCM_UPCTL));
clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
@@ -250,22 +248,10 @@
static void __init mx25_clocks_init_dt(struct device_node *np)
{
- struct device_node *refnp;
- unsigned long osc_rate = 24000000;
void __iomem *ccm;
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(refnp, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(refnp, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(refnp, "fsl,imx-osc"))
- osc_rate = rate;
- }
-
ccm = of_iomap(np, 0);
- __mx25_clocks_init(osc_rate, ccm);
+ __mx25_clocks_init(ccm);
clk_data.clks = clk;
clk_data.clk_num = ARRAY_SIZE(clk);
diff --git a/drivers/clk/imx/clk-imx51-imx53.c b/drivers/clk/imx/clk-imx51-imx53.c
index c677034..29d4c44 100644
--- a/drivers/clk/imx/clk-imx51-imx53.c
+++ b/drivers/clk/imx/clk-imx51-imx53.c
@@ -519,10 +519,10 @@
mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_LDB_DI0_GATE] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
clk[IMX5_CLK_LDB_DI1_GATE] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
- clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
- mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
- clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
- mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+ clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux_flags("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel), CLK_SET_RATE_PARENT);
+ clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux_flags("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index c193508..f0efc6f 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -70,7 +70,8 @@
static const char *lvds_sels[] = {
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
- "pcie_ref_125m", "sata_ref_100m",
+ "pcie_ref_125m", "sata_ref_100m", "usbphy1", "usbphy2",
+ "dummy", "dummy", "dummy", "dummy", "osc",
};
static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 01718d0..08692d7 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -399,9 +399,7 @@
/* mask handshake of mmdc */
writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX6UL clk %d: register failed with %ld\n", i, PTR_ERR(clks[i]));
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 448ef32..fbb6a8c 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -833,10 +833,13 @@
clks[IMX7D_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- if (IS_ERR(clks[i]))
- pr_err("i.MX7D clk %d: register failed with %ld\n",
- i, PTR_ERR(clks[i]));
+ clks[IMX7D_CLK_ARM] = imx_clk_cpu("arm", "arm_a7_root_clk",
+ clks[IMX7D_ARM_A7_ROOT_CLK],
+ clks[IMX7D_ARM_A7_ROOT_SRC],
+ clks[IMX7D_PLL_ARM_MAIN_CLK],
+ clks[IMX7D_PLL_SYS_MAIN_CLK]);
+
+ imx_check_clocks(clks, ARRAY_SIZE(clks));
clk_data.clks = clks;
clk_data.clk_num = ARRAY_SIZE(clks);
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index 6addf8f..c05c43d 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -97,6 +97,16 @@
writel_relaxed(val, pll->base);
}
+static int clk_pllv3_is_prepared(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ return 1;
+
+ return 0;
+}
+
static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -139,6 +149,7 @@
static const struct clk_ops clk_pllv3_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_recalc_rate,
.round_rate = clk_pllv3_round_rate,
.set_rate = clk_pllv3_set_rate,
@@ -193,6 +204,7 @@
static const struct clk_ops clk_pllv3_sys_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_sys_recalc_rate,
.round_rate = clk_pllv3_sys_round_rate,
.set_rate = clk_pllv3_sys_set_rate,
@@ -265,6 +277,7 @@
static const struct clk_ops clk_pllv3_av_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_av_recalc_rate,
.round_rate = clk_pllv3_av_round_rate,
.set_rate = clk_pllv3_av_set_rate,
@@ -279,6 +292,7 @@
static const struct clk_ops clk_pllv3_enet_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_enet_recalc_rate,
};
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index d1b1c95..0a94d96 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -335,22 +335,22 @@
clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4);
clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16);
clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4);
- clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15));
+ clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(15));
clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4);
clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17);
clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4);
- clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0));
+ clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(0));
clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4);
clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18);
clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4);
- clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1));
+ clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(1));
clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4);
clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19);
clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4);
- clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2));
+ clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(2));
clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4);
clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 71cfdf7..2eb5f0e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,4 +1,5 @@
menu "Clock Source drivers"
+ depends on !ARCH_USES_GETTIMEOFFSET
config CLKSRC_OF
bool
diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c
index 10202f1..517e1c7 100644
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -203,7 +203,7 @@
int err;
ftm_writel(0x00, priv->clkevt_base + FTM_CNTIN);
- ftm_writel(~0UL, priv->clkevt_base + FTM_MOD);
+ ftm_writel(~0u, priv->clkevt_base + FTM_MOD);
ftm_reset_counter(priv->clkevt_base);
@@ -230,7 +230,7 @@
int err;
ftm_writel(0x00, priv->clksrc_base + FTM_CNTIN);
- ftm_writel(~0UL, priv->clksrc_base + FTM_MOD);
+ ftm_writel(~0u, priv->clksrc_base + FTM_MOD);
ftm_reset_counter(priv->clksrc_base);
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 1582c1c..235a1ba 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -84,6 +84,7 @@
config ARM_MT8173_CPUFREQ
bool "Mediatek MT8173 CPUFreq support"
depends on ARCH_MEDIATEK && REGULATOR
+ depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
depends on !CPU_THERMAL || THERMAL=y
select PM_OPP
help
@@ -201,7 +202,7 @@
config ARM_SCPI_CPUFREQ
tristate "SCPI based CPUfreq driver"
- depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
help
This adds the CPUfreq driver support for ARM big.LITTLE platforms
using SCPI protocol for CPU power management.
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index adbd1de..c59bdcb 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -5,7 +5,6 @@
config X86_INTEL_PSTATE
bool "Intel P state control"
depends on X86
- select ACPI_PROCESSOR if ACPI
help
This driver provides a P state for Intel core processors.
The driver implements an internal governor and will become
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index e8cb334..7c0bdfb 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -98,10 +98,11 @@
policy->max = cpu->perf_caps.highest_perf;
policy->cpuinfo.min_freq = policy->min;
policy->cpuinfo.max_freq = policy->max;
+ policy->shared_type = cpu->shared_type;
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
cpumask_copy(policy->cpus, cpu->shared_cpu_map);
- else {
+ else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
/* Support only SW_ANY for now. */
pr_debug("Unsupported CPU co-ord type\n");
return -EFAULT;
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7c48e73..a83c995 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1401,13 +1401,10 @@
}
cpumask_clear_cpu(cpu, policy->real_cpus);
-
- if (cpumask_empty(policy->real_cpus)) {
- cpufreq_policy_free(policy, true);
- return;
- }
-
remove_cpu_dev_symlink(policy, cpu);
+
+ if (cpumask_empty(policy->real_cpus))
+ cpufreq_policy_free(policy, true);
}
static void handle_update(struct work_struct *work)
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 2e31d09..4d07cbd 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -34,14 +34,10 @@
#include <asm/cpu_device_id.h>
#include <asm/cpufeature.h>
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
-#endif
-
-#define BYT_RATIOS 0x66a
-#define BYT_VIDS 0x66b
-#define BYT_TURBO_RATIOS 0x66c
-#define BYT_TURBO_VIDS 0x66d
+#define ATOM_RATIOS 0x66a
+#define ATOM_VIDS 0x66b
+#define ATOM_TURBO_RATIOS 0x66c
+#define ATOM_TURBO_VIDS 0x66d
#define FRAC_BITS 8
#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
@@ -117,9 +113,6 @@
u64 prev_mperf;
u64 prev_tsc;
struct sample sample;
-#if IS_ENABLED(CONFIG_ACPI)
- struct acpi_processor_performance acpi_perf_data;
-#endif
};
static struct cpudata **all_cpu_data;
@@ -150,7 +143,6 @@
static struct pstate_adjust_policy pid_params;
static struct pstate_funcs pstate_funcs;
static int hwp_active;
-static int no_acpi_perf;
struct perf_limits {
int no_turbo;
@@ -163,8 +155,6 @@
int max_sysfs_pct;
int min_policy_pct;
int min_sysfs_pct;
- int max_perf_ctl;
- int min_perf_ctl;
};
static struct perf_limits performance_limits = {
@@ -191,8 +181,6 @@
.max_sysfs_pct = 100,
.min_policy_pct = 0,
.min_sysfs_pct = 0,
- .max_perf_ctl = 0,
- .min_perf_ctl = 0,
};
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
@@ -201,153 +189,6 @@
static struct perf_limits *limits = &powersave_limits;
#endif
-#if IS_ENABLED(CONFIG_ACPI)
-/*
- * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
- * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
- * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
- * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
- * target ratio 0x17. The _PSS control value stores in a format which can be
- * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
- * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
- * This function converts the _PSS control value to intel pstate driver format
- * for comparison and assignment.
- */
-static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
-{
- return cpu->acpi_perf_data.states[index].control >> 8;
-}
-
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
- struct cpudata *cpu;
- int ret;
- bool turbo_absent = false;
- int max_pstate_index;
- int min_pss_ctl, max_pss_ctl, turbo_pss_ctl;
- int i;
-
- cpu = all_cpu_data[policy->cpu];
-
- pr_debug("intel_pstate: default limits 0x%x 0x%x 0x%x\n",
- cpu->pstate.min_pstate, cpu->pstate.max_pstate,
- cpu->pstate.turbo_pstate);
-
- if (!cpu->acpi_perf_data.shared_cpu_map &&
- zalloc_cpumask_var_node(&cpu->acpi_perf_data.shared_cpu_map,
- GFP_KERNEL, cpu_to_node(policy->cpu))) {
- return -ENOMEM;
- }
-
- ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
- policy->cpu);
- if (ret)
- return ret;
-
- /*
- * Check if the control value in _PSS is for PERF_CTL MSR, which should
- * guarantee that the states returned by it map to the states in our
- * list directly.
- */
- if (cpu->acpi_perf_data.control_register.space_id !=
- ACPI_ADR_SPACE_FIXED_HARDWARE)
- return -EIO;
-
- pr_debug("intel_pstate: CPU%u - ACPI _PSS perf data\n", policy->cpu);
- for (i = 0; i < cpu->acpi_perf_data.state_count; i++)
- pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n",
- (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
- (u32) cpu->acpi_perf_data.states[i].core_frequency,
- (u32) cpu->acpi_perf_data.states[i].power,
- (u32) cpu->acpi_perf_data.states[i].control);
-
- /*
- * If there is only one entry _PSS, simply ignore _PSS and continue as
- * usual without taking _PSS into account
- */
- if (cpu->acpi_perf_data.state_count < 2)
- return 0;
-
- turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
- min_pss_ctl = convert_to_native_pstate_format(cpu,
- cpu->acpi_perf_data.state_count - 1);
- /* Check if there is a turbo freq in _PSS */
- if (turbo_pss_ctl <= cpu->pstate.max_pstate &&
- turbo_pss_ctl > cpu->pstate.min_pstate) {
- pr_debug("intel_pstate: no turbo range exists in _PSS\n");
- limits->no_turbo = limits->turbo_disabled = 1;
- cpu->pstate.turbo_pstate = cpu->pstate.max_pstate;
- turbo_absent = true;
- }
-
- /* Check if the max non turbo p state < Intel P state max */
- max_pstate_index = turbo_absent ? 0 : 1;
- max_pss_ctl = convert_to_native_pstate_format(cpu, max_pstate_index);
- if (max_pss_ctl < cpu->pstate.max_pstate &&
- max_pss_ctl > cpu->pstate.min_pstate)
- cpu->pstate.max_pstate = max_pss_ctl;
-
- /* check If min perf > Intel P State min */
- if (min_pss_ctl > cpu->pstate.min_pstate &&
- min_pss_ctl < cpu->pstate.max_pstate) {
- cpu->pstate.min_pstate = min_pss_ctl;
- policy->cpuinfo.min_freq = min_pss_ctl * cpu->pstate.scaling;
- }
-
- if (turbo_absent)
- policy->cpuinfo.max_freq = cpu->pstate.max_pstate *
- cpu->pstate.scaling;
- else {
- policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate *
- cpu->pstate.scaling;
- /*
- * The _PSS table doesn't contain whole turbo frequency range.
- * This just contains +1 MHZ above the max non turbo frequency,
- * with control value corresponding to max turbo ratio. But
- * when cpufreq set policy is called, it will call with this
- * max frequency, which will cause a reduced performance as
- * this driver uses real max turbo frequency as the max
- * frequeny. So correct this frequency in _PSS table to
- * correct max turbo frequency based on the turbo ratio.
- * Also need to convert to MHz as _PSS freq is in MHz.
- */
- cpu->acpi_perf_data.states[0].core_frequency =
- turbo_pss_ctl * 100;
- }
-
- pr_debug("intel_pstate: Updated limits using _PSS 0x%x 0x%x 0x%x\n",
- cpu->pstate.min_pstate, cpu->pstate.max_pstate,
- cpu->pstate.turbo_pstate);
- pr_debug("intel_pstate: policy max_freq=%d Khz min_freq = %d KHz\n",
- policy->cpuinfo.max_freq, policy->cpuinfo.min_freq);
-
- return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
- struct cpudata *cpu;
-
- if (!no_acpi_perf)
- return 0;
-
- cpu = all_cpu_data[policy->cpu];
- acpi_processor_unregister_performance(policy->cpu);
- return 0;
-}
-
-#else
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
- return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
- return 0;
-}
-#endif
-
static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
int deadband, int integral) {
pid->setpoint = setpoint;
@@ -687,31 +528,31 @@
wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
}
-static int byt_get_min_pstate(void)
+static int atom_get_min_pstate(void)
{
u64 value;
- rdmsrl(BYT_RATIOS, value);
+ rdmsrl(ATOM_RATIOS, value);
return (value >> 8) & 0x7F;
}
-static int byt_get_max_pstate(void)
+static int atom_get_max_pstate(void)
{
u64 value;
- rdmsrl(BYT_RATIOS, value);
+ rdmsrl(ATOM_RATIOS, value);
return (value >> 16) & 0x7F;
}
-static int byt_get_turbo_pstate(void)
+static int atom_get_turbo_pstate(void)
{
u64 value;
- rdmsrl(BYT_TURBO_RATIOS, value);
+ rdmsrl(ATOM_TURBO_RATIOS, value);
return value & 0x7F;
}
-static void byt_set_pstate(struct cpudata *cpudata, int pstate)
+static void atom_set_pstate(struct cpudata *cpudata, int pstate)
{
u64 val;
int32_t vid_fp;
@@ -736,27 +577,42 @@
wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
}
-#define BYT_BCLK_FREQS 5
-static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800};
-
-static int byt_get_scaling(void)
+static int silvermont_get_scaling(void)
{
u64 value;
int i;
+ /* Defined in Table 35-6 from SDM (Sept 2015) */
+ static int silvermont_freq_table[] = {
+ 83300, 100000, 133300, 116700, 80000};
rdmsrl(MSR_FSB_FREQ, value);
- i = value & 0x3;
+ i = value & 0x7;
+ WARN_ON(i > 4);
- BUG_ON(i > BYT_BCLK_FREQS);
-
- return byt_freq_table[i] * 100;
+ return silvermont_freq_table[i];
}
-static void byt_get_vid(struct cpudata *cpudata)
+static int airmont_get_scaling(void)
+{
+ u64 value;
+ int i;
+ /* Defined in Table 35-10 from SDM (Sept 2015) */
+ static int airmont_freq_table[] = {
+ 83300, 100000, 133300, 116700, 80000,
+ 93300, 90000, 88900, 87500};
+
+ rdmsrl(MSR_FSB_FREQ, value);
+ i = value & 0xF;
+ WARN_ON(i > 8);
+
+ return airmont_freq_table[i];
+}
+
+static void atom_get_vid(struct cpudata *cpudata)
{
u64 value;
- rdmsrl(BYT_VIDS, value);
+ rdmsrl(ATOM_VIDS, value);
cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
cpudata->vid.ratio = div_fp(
@@ -764,7 +620,7 @@
int_tofp(cpudata->pstate.max_pstate -
cpudata->pstate.min_pstate));
- rdmsrl(BYT_TURBO_VIDS, value);
+ rdmsrl(ATOM_TURBO_VIDS, value);
cpudata->vid.turbo = value & 0x7f;
}
@@ -885,7 +741,7 @@
},
};
-static struct cpu_defaults byt_params = {
+static struct cpu_defaults silvermont_params = {
.pid_policy = {
.sample_rate_ms = 10,
.deadband = 0,
@@ -895,13 +751,33 @@
.i_gain_pct = 4,
},
.funcs = {
- .get_max = byt_get_max_pstate,
- .get_max_physical = byt_get_max_pstate,
- .get_min = byt_get_min_pstate,
- .get_turbo = byt_get_turbo_pstate,
- .set = byt_set_pstate,
- .get_scaling = byt_get_scaling,
- .get_vid = byt_get_vid,
+ .get_max = atom_get_max_pstate,
+ .get_max_physical = atom_get_max_pstate,
+ .get_min = atom_get_min_pstate,
+ .get_turbo = atom_get_turbo_pstate,
+ .set = atom_set_pstate,
+ .get_scaling = silvermont_get_scaling,
+ .get_vid = atom_get_vid,
+ },
+};
+
+static struct cpu_defaults airmont_params = {
+ .pid_policy = {
+ .sample_rate_ms = 10,
+ .deadband = 0,
+ .setpoint = 60,
+ .p_gain_pct = 14,
+ .d_gain_pct = 0,
+ .i_gain_pct = 4,
+ },
+ .funcs = {
+ .get_max = atom_get_max_pstate,
+ .get_max_physical = atom_get_max_pstate,
+ .get_min = atom_get_min_pstate,
+ .get_turbo = atom_get_turbo_pstate,
+ .set = atom_set_pstate,
+ .get_scaling = airmont_get_scaling,
+ .get_vid = atom_get_vid,
},
};
@@ -938,23 +814,12 @@
* policy, or by cpu specific default values determined through
* experimentation.
*/
- if (limits->max_perf_ctl && limits->max_sysfs_pct >=
- limits->max_policy_pct) {
- *max = limits->max_perf_ctl;
- } else {
- max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf),
- limits->max_perf));
- *max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate,
- cpu->pstate.turbo_pstate);
- }
+ max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits->max_perf));
+ *max = clamp_t(int, max_perf_adj,
+ cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
- if (limits->min_perf_ctl) {
- *min = limits->min_perf_ctl;
- } else {
- min_perf = fp_toint(mul_fp(int_tofp(max_perf),
- limits->min_perf));
- *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
- }
+ min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits->min_perf));
+ *min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
}
static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate, bool force)
@@ -1153,7 +1018,7 @@
static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
ICPU(0x2a, core_params),
ICPU(0x2d, core_params),
- ICPU(0x37, byt_params),
+ ICPU(0x37, silvermont_params),
ICPU(0x3a, core_params),
ICPU(0x3c, core_params),
ICPU(0x3d, core_params),
@@ -1162,7 +1027,7 @@
ICPU(0x45, core_params),
ICPU(0x46, core_params),
ICPU(0x47, core_params),
- ICPU(0x4c, byt_params),
+ ICPU(0x4c, airmont_params),
ICPU(0x4e, core_params),
ICPU(0x4f, core_params),
ICPU(0x5e, core_params),
@@ -1229,12 +1094,6 @@
static int intel_pstate_set_policy(struct cpufreq_policy *policy)
{
-#if IS_ENABLED(CONFIG_ACPI)
- struct cpudata *cpu;
- int i;
-#endif
- pr_debug("intel_pstate: %s max %u policy->max %u\n", __func__,
- policy->cpuinfo.max_freq, policy->max);
if (!policy->cpuinfo.max_freq)
return -ENODEV;
@@ -1242,6 +1101,8 @@
policy->max >= policy->cpuinfo.max_freq) {
pr_debug("intel_pstate: set performance\n");
limits = &performance_limits;
+ if (hwp_active)
+ intel_pstate_hwp_set();
return 0;
}
@@ -1249,7 +1110,8 @@
limits = &powersave_limits;
limits->min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
limits->min_policy_pct = clamp_t(int, limits->min_policy_pct, 0 , 100);
- limits->max_policy_pct = (policy->max * 100) / policy->cpuinfo.max_freq;
+ limits->max_policy_pct = DIV_ROUND_UP(policy->max * 100,
+ policy->cpuinfo.max_freq);
limits->max_policy_pct = clamp_t(int, limits->max_policy_pct, 0 , 100);
/* Normalize user input to [min_policy_pct, max_policy_pct] */
@@ -1261,6 +1123,7 @@
limits->max_sysfs_pct);
limits->max_perf_pct = max(limits->min_policy_pct,
limits->max_perf_pct);
+ limits->max_perf = round_up(limits->max_perf, 8);
/* Make sure min_perf_pct <= max_perf_pct */
limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
@@ -1270,23 +1133,6 @@
limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
int_tofp(100));
-#if IS_ENABLED(CONFIG_ACPI)
- cpu = all_cpu_data[policy->cpu];
- for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
- int control;
-
- control = convert_to_native_pstate_format(cpu, i);
- if (control * cpu->pstate.scaling == policy->max)
- limits->max_perf_ctl = control;
- if (control * cpu->pstate.scaling == policy->min)
- limits->min_perf_ctl = control;
- }
-
- pr_debug("intel_pstate: max %u policy_max %u perf_ctl [0x%x-0x%x]\n",
- policy->cpuinfo.max_freq, policy->max, limits->min_perf_ctl,
- limits->max_perf_ctl);
-#endif
-
if (hwp_active)
intel_pstate_hwp_set();
@@ -1341,30 +1187,18 @@
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
policy->cpuinfo.max_freq =
cpu->pstate.turbo_pstate * cpu->pstate.scaling;
- if (!no_acpi_perf)
- intel_pstate_init_perf_limits(policy);
- /*
- * If there is no acpi perf data or error, we ignore and use Intel P
- * state calculated limits, So this is not fatal error.
- */
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
return 0;
}
-static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
-{
- return intel_pstate_exit_perf_limits(policy);
-}
-
static struct cpufreq_driver intel_pstate_driver = {
.flags = CPUFREQ_CONST_LOOPS,
.verify = intel_pstate_verify_policy,
.setpolicy = intel_pstate_set_policy,
.get = intel_pstate_get,
.init = intel_pstate_cpu_init,
- .exit = intel_pstate_cpu_exit,
.stop_cpu = intel_pstate_stop_cpu,
.name = "intel_pstate",
};
@@ -1406,6 +1240,7 @@
}
#if IS_ENABLED(CONFIG_ACPI)
+#include <acpi/processor.h>
static bool intel_pstate_no_acpi_pss(void)
{
@@ -1601,9 +1436,6 @@
force_load = 1;
if (!strcmp(str, "hwp_only"))
hwp_only = 1;
- if (!strcmp(str, "no_acpi"))
- no_acpi_perf = 1;
-
return 0;
}
early_param("intel_pstate", intel_pstate_setup);
diff --git a/drivers/crypto/qat/qat_common/adf_ctl_drv.c b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
index 03856ad..473d36d 100644
--- a/drivers/crypto/qat/qat_common/adf_ctl_drv.c
+++ b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
@@ -198,7 +198,7 @@
goto out_err;
}
- params_head = section_head->params;
+ params_head = section.params;
while (params_head) {
if (copy_from_user(&key_val, (void __user *)params_head,
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 4e55239..53d22eb 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -729,8 +729,8 @@
return NULL;
dev_info(chan2dev(chan),
- "%s: src=0x%08x, dest=0x%08x, numf=%d, frame_size=%d, flags=0x%lx\n",
- __func__, xt->src_start, xt->dst_start, xt->numf,
+ "%s: src=%pad, dest=%pad, numf=%d, frame_size=%d, flags=0x%lx\n",
+ __func__, &xt->src_start, &xt->dst_start, xt->numf,
xt->frame_size, flags);
/*
@@ -824,8 +824,8 @@
u32 ctrla;
u32 ctrlb;
- dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
- dest, src, len, flags);
+ dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d%pad s%pad l0x%zx f0x%lx\n",
+ &dest, &src, len, flags);
if (unlikely(!len)) {
dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
@@ -938,8 +938,8 @@
void __iomem *vaddr;
dma_addr_t paddr;
- dev_vdbg(chan2dev(chan), "%s: d0x%x v0x%x l0x%zx f0x%lx\n", __func__,
- dest, value, len, flags);
+ dev_vdbg(chan2dev(chan), "%s: d%pad v0x%x l0x%zx f0x%lx\n", __func__,
+ &dest, value, len, flags);
if (unlikely(!len)) {
dev_dbg(chan2dev(chan), "%s: length is zero!\n", __func__);
@@ -1022,8 +1022,8 @@
dma_addr_t dest = sg_dma_address(sg);
size_t len = sg_dma_len(sg);
- dev_vdbg(chan2dev(chan), "%s: d0x%08x, l0x%zx\n",
- __func__, dest, len);
+ dev_vdbg(chan2dev(chan), "%s: d%pad, l0x%zx\n",
+ __func__, &dest, len);
if (!is_dma_fill_aligned(chan->device, dest, 0, len)) {
dev_err(chan2dev(chan), "%s: buffer is not aligned\n",
@@ -1439,9 +1439,9 @@
unsigned int periods = buf_len / period_len;
unsigned int i;
- dev_vdbg(chan2dev(chan), "prep_dma_cyclic: %s buf@0x%08x - %d (%d/%d)\n",
+ dev_vdbg(chan2dev(chan), "prep_dma_cyclic: %s buf@%pad - %d (%d/%d)\n",
direction == DMA_MEM_TO_DEV ? "TO DEVICE" : "FROM DEVICE",
- buf_addr,
+ &buf_addr,
periods, buf_len, period_len);
if (unlikely(!atslave || !buf_len || !period_len)) {
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index d1cfc8c..7f58f06 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -385,9 +385,9 @@
static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
{
dev_crit(chan2dev(&atchan->chan_common),
- " desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
- lli->saddr, lli->daddr,
- lli->ctrla, lli->ctrlb, lli->dscr);
+ " desc: s%pad d%pad ctrl0x%x:0x%x l0x%pad\n",
+ &lli->saddr, &lli->daddr,
+ lli->ctrla, lli->ctrlb, &lli->dscr);
}
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index b5e132d..7f039de 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -920,8 +920,8 @@
desc->lld.mbr_cfg = chan_cc;
dev_dbg(chan2dev(chan),
- "%s: lld: mbr_sa=0x%08x, mbr_da=0x%08x, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
- __func__, desc->lld.mbr_sa, desc->lld.mbr_da,
+ "%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
+ __func__, &desc->lld.mbr_sa, &desc->lld.mbr_da,
desc->lld.mbr_ubc, desc->lld.mbr_cfg);
/* Chain lld. */
@@ -953,8 +953,8 @@
if ((xt->numf > 1) && (xt->frame_size > 1))
return NULL;
- dev_dbg(chan2dev(chan), "%s: src=0x%08x, dest=0x%08x, numf=%d, frame_size=%d, flags=0x%lx\n",
- __func__, xt->src_start, xt->dst_start, xt->numf,
+ dev_dbg(chan2dev(chan), "%s: src=%pad, dest=%pad, numf=%d, frame_size=%d, flags=0x%lx\n",
+ __func__, &xt->src_start, &xt->dst_start, xt->numf,
xt->frame_size, flags);
src_addr = xt->src_start;
@@ -1179,8 +1179,8 @@
desc->lld.mbr_cfg = chan_cc;
dev_dbg(chan2dev(chan),
- "%s: lld: mbr_da=0x%08x, mbr_ds=0x%08x, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
- __func__, desc->lld.mbr_da, desc->lld.mbr_ds, desc->lld.mbr_ubc,
+ "%s: lld: mbr_da=%pad, mbr_ds=%pad, mbr_ubc=0x%08x, mbr_cfg=0x%08x\n",
+ __func__, &desc->lld.mbr_da, &desc->lld.mbr_ds, desc->lld.mbr_ubc,
desc->lld.mbr_cfg);
return desc;
@@ -1193,8 +1193,8 @@
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac_desc *desc;
- dev_dbg(chan2dev(chan), "%s: dest=0x%08x, len=%d, pattern=0x%x, flags=0x%lx\n",
- __func__, dest, len, value, flags);
+ dev_dbg(chan2dev(chan), "%s: dest=%pad, len=%d, pattern=0x%x, flags=0x%lx\n",
+ __func__, &dest, len, value, flags);
if (unlikely(!len))
return NULL;
@@ -1229,8 +1229,8 @@
/* Prepare descriptors. */
for_each_sg(sgl, sg, sg_len, i) {
- dev_dbg(chan2dev(chan), "%s: dest=0x%08x, len=%d, pattern=0x%x, flags=0x%lx\n",
- __func__, sg_dma_address(sg), sg_dma_len(sg),
+ dev_dbg(chan2dev(chan), "%s: dest=%pad, len=%d, pattern=0x%x, flags=0x%lx\n",
+ __func__, &sg_dma_address(sg), sg_dma_len(sg),
value, flags);
desc = at_xdmac_memset_create_desc(chan, atchan,
sg_dma_address(sg),
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 6b03e4e..16fe773 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -107,7 +107,7 @@
/* CCCFG register */
#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */
-#define GET_NUM_QDMACH(x) (x & 0x70 >> 4) /* bits 4-6 */
+#define GET_NUM_QDMACH(x) ((x & 0x70) >> 4) /* bits 4-6 */
#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */
#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */
#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */
@@ -1565,7 +1565,7 @@
struct platform_device *tc_pdev;
int ret;
- if (!tc)
+ if (!IS_ENABLED(CONFIG_OF) || !tc)
return;
tc_pdev = of_find_device_by_node(tc->node);
@@ -1752,16 +1752,14 @@
return ret;
}
-static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
+static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
{
- s16 *memcpy_ch = memcpy_channels;
-
if (!memcpy_channels)
return false;
- while (*memcpy_ch != -1) {
- if (*memcpy_ch == ch_num)
+ while (*memcpy_channels != -1) {
+ if (*memcpy_channels == ch_num)
return true;
- memcpy_ch++;
+ memcpy_channels++;
}
return false;
}
@@ -1775,7 +1773,7 @@
{
struct dma_device *s_ddev = &ecc->dma_slave;
struct dma_device *m_ddev = NULL;
- s16 *memcpy_channels = ecc->info->memcpy_channels;
+ s32 *memcpy_channels = ecc->info->memcpy_channels;
int i, j;
dma_cap_zero(s_ddev->cap_mask);
@@ -1996,16 +1994,16 @@
prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
if (prop) {
const char pname[] = "ti,edma-memcpy-channels";
- size_t nelm = sz / sizeof(s16);
- s16 *memcpy_ch;
+ size_t nelm = sz / sizeof(s32);
+ s32 *memcpy_ch;
- memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
+ memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
GFP_KERNEL);
if (!memcpy_ch)
return ERR_PTR(-ENOMEM);
- ret = of_property_read_u16_array(dev->of_node, pname,
- (u16 *)memcpy_ch, nelm);
+ ret = of_property_read_u32_array(dev->of_node, pname,
+ (u32 *)memcpy_ch, nelm);
if (ret)
return ERR_PTR(ret);
@@ -2017,31 +2015,50 @@
&sz);
if (prop) {
const char pname[] = "ti,edma-reserved-slot-ranges";
+ u32 (*tmp)[2];
s16 (*rsv_slots)[2];
- size_t nelm = sz / sizeof(*rsv_slots);
+ size_t nelm = sz / sizeof(*tmp);
struct edma_rsv_info *rsv_info;
+ int i;
if (!nelm)
return info;
- rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
- if (!rsv_info)
+ tmp = kcalloc(nelm, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
return ERR_PTR(-ENOMEM);
+ rsv_info = devm_kzalloc(dev, sizeof(*rsv_info), GFP_KERNEL);
+ if (!rsv_info) {
+ kfree(tmp);
+ return ERR_PTR(-ENOMEM);
+ }
+
rsv_slots = devm_kcalloc(dev, nelm + 1, sizeof(*rsv_slots),
GFP_KERNEL);
- if (!rsv_slots)
+ if (!rsv_slots) {
+ kfree(tmp);
return ERR_PTR(-ENOMEM);
+ }
- ret = of_property_read_u16_array(dev->of_node, pname,
- (u16 *)rsv_slots, nelm * 2);
- if (ret)
+ ret = of_property_read_u32_array(dev->of_node, pname,
+ (u32 *)tmp, nelm * 2);
+ if (ret) {
+ kfree(tmp);
return ERR_PTR(ret);
+ }
+ for (i = 0; i < nelm; i++) {
+ rsv_slots[i][0] = tmp[i][0];
+ rsv_slots[i][1] = tmp[i][1];
+ }
rsv_slots[nelm][0] = -1;
rsv_slots[nelm][1] = -1;
+
info->rsv = rsv_info;
info->rsv->rsv_slots = (const s16 (*)[2])rsv_slots;
+
+ kfree(tmp);
}
return info;
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 7058d58..0f6fd42 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -1462,7 +1462,7 @@
#define EVENT_REMAP_CELLS 3
-static int __init sdma_event_remap(struct sdma_engine *sdma)
+static int sdma_event_remap(struct sdma_engine *sdma)
{
struct device_node *np = sdma->dev->of_node;
struct device_node *gpr_np = of_parse_phandle(np, "gpr", 0);
diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c
index ebd8a5f..f1bcc2a 100644
--- a/drivers/dma/sh/usb-dmac.c
+++ b/drivers/dma/sh/usb-dmac.c
@@ -679,8 +679,11 @@
struct usb_dmac *dmac = dev_get_drvdata(dev);
int i;
- for (i = 0; i < dmac->n_channels; ++i)
+ for (i = 0; i < dmac->n_channels; ++i) {
+ if (!dmac->channels[i].iomem)
+ break;
usb_dmac_chan_halt(&dmac->channels[i]);
+ }
return 0;
}
@@ -799,11 +802,10 @@
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "runtime PM get sync failed (%d)\n", ret);
- return ret;
+ goto error_pm;
}
ret = usb_dmac_init(dmac);
- pm_runtime_put(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "failed to reset device\n");
@@ -851,10 +853,13 @@
if (ret < 0)
goto error;
+ pm_runtime_put(&pdev->dev);
return 0;
error:
of_dma_controller_free(pdev->dev.of_node);
+ pm_runtime_put(&pdev->dev);
+error_pm:
pm_runtime_disable(&pdev->dev);
return ret;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 615ce6d..251b147 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -389,7 +389,6 @@
* Fences.
*/
struct amdgpu_fence_driver {
- struct amdgpu_ring *ring;
uint64_t gpu_addr;
volatile uint32_t *cpu_addr;
/* sync_seq is protected by ring emission lock */
@@ -398,7 +397,7 @@
bool initialized;
struct amdgpu_irq_src *irq_src;
unsigned irq_type;
- struct delayed_work lockup_work;
+ struct timer_list fallback_timer;
wait_queue_head_t fence_queue;
};
@@ -497,6 +496,7 @@
/* bo virtual addresses in a specific vm */
struct amdgpu_bo_va {
+ struct mutex mutex;
/* protected by bo being reserved */
struct list_head bo_list;
struct fence *last_pt_update;
@@ -917,8 +917,8 @@
#define AMDGPU_VM_FAULT_STOP_ALWAYS 2
struct amdgpu_vm_pt {
- struct amdgpu_bo *bo;
- uint64_t addr;
+ struct amdgpu_bo *bo;
+ uint64_t addr;
};
struct amdgpu_vm_id {
@@ -926,13 +926,9 @@
uint64_t pd_gpu_addr;
/* last flushed PD/PT update */
struct fence *flushed_updates;
- /* last use of vmid */
- struct fence *last_id_use;
};
struct amdgpu_vm {
- struct mutex mutex;
-
struct rb_root va;
/* protecting invalidated */
@@ -957,24 +953,70 @@
/* for id and flush management per ring */
struct amdgpu_vm_id ids[AMDGPU_MAX_RINGS];
+ /* for interval tree */
+ spinlock_t it_lock;
};
struct amdgpu_vm_manager {
- struct fence *active[AMDGPU_NUM_VM];
- uint32_t max_pfn;
+ struct {
+ struct fence *active;
+ atomic_long_t owner;
+ } ids[AMDGPU_NUM_VM];
+
+ uint32_t max_pfn;
/* number of VMIDs */
- unsigned nvm;
+ unsigned nvm;
/* vram base address for page table entry */
- u64 vram_base_offset;
+ u64 vram_base_offset;
/* is vm enabled? */
- bool enabled;
- /* for hw to save the PD addr on suspend/resume */
- uint32_t saved_table_addr[AMDGPU_NUM_VM];
+ bool enabled;
/* vm pte handling */
const struct amdgpu_vm_pte_funcs *vm_pte_funcs;
struct amdgpu_ring *vm_pte_funcs_ring;
};
+void amdgpu_vm_manager_fini(struct amdgpu_device *adev);
+int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm);
+void amdgpu_vm_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm);
+struct amdgpu_bo_list_entry *amdgpu_vm_get_bos(struct amdgpu_device *adev,
+ struct amdgpu_vm *vm,
+ struct list_head *head);
+int amdgpu_vm_grab_id(struct amdgpu_vm *vm, struct amdgpu_ring *ring,
+ struct amdgpu_sync *sync);
+void amdgpu_vm_flush(struct amdgpu_ring *ring,
+ struct amdgpu_vm *vm,
+ struct fence *updates);
+void amdgpu_vm_fence(struct amdgpu_device *adev,
+ struct amdgpu_vm *vm,
+ struct fence *fence);
+uint64_t amdgpu_vm_map_gart(struct amdgpu_device *adev, uint64_t addr);
+int amdgpu_vm_update_page_directory(struct amdgpu_device *adev,
+ struct amdgpu_vm *vm);
+int amdgpu_vm_clear_freed(struct amdgpu_device *adev,
+ struct amdgpu_vm *vm);
+int amdgpu_vm_clear_invalids(struct amdgpu_device *adev, struct amdgpu_vm *vm,
+ struct amdgpu_sync *sync);
+int amdgpu_vm_bo_update(struct amdgpu_device *adev,
+ struct amdgpu_bo_va *bo_va,
+ struct ttm_mem_reg *mem);
+void amdgpu_vm_bo_invalidate(struct amdgpu_device *adev,
+ struct amdgpu_bo *bo);
+struct amdgpu_bo_va *amdgpu_vm_bo_find(struct amdgpu_vm *vm,
+ struct amdgpu_bo *bo);
+struct amdgpu_bo_va *amdgpu_vm_bo_add(struct amdgpu_device *adev,
+ struct amdgpu_vm *vm,
+ struct amdgpu_bo *bo);
+int amdgpu_vm_bo_map(struct amdgpu_device *adev,
+ struct amdgpu_bo_va *bo_va,
+ uint64_t addr, uint64_t offset,
+ uint64_t size, uint32_t flags);
+int amdgpu_vm_bo_unmap(struct amdgpu_device *adev,
+ struct amdgpu_bo_va *bo_va,
+ uint64_t addr);
+void amdgpu_vm_bo_rmv(struct amdgpu_device *adev,
+ struct amdgpu_bo_va *bo_va);
+int amdgpu_vm_free_job(struct amdgpu_job *job);
+
/*
* context related structures
*/
@@ -1211,6 +1253,7 @@
/* relocations */
struct amdgpu_bo_list_entry *vm_bos;
struct list_head validated;
+ struct fence *fence;
struct amdgpu_ib *ibs;
uint32_t num_ibs;
@@ -1226,7 +1269,7 @@
struct amdgpu_device *adev;
struct amdgpu_ib *ibs;
uint32_t num_ibs;
- struct mutex job_lock;
+ void *owner;
struct amdgpu_user_fence uf;
int (*free_job)(struct amdgpu_job *job);
};
@@ -2257,11 +2300,6 @@
bool amdgpu_card_posted(struct amdgpu_device *adev);
void amdgpu_update_display_priority(struct amdgpu_device *adev);
bool amdgpu_boot_test_post_card(struct amdgpu_device *adev);
-struct amdgpu_cs_parser *amdgpu_cs_parser_create(struct amdgpu_device *adev,
- struct drm_file *filp,
- struct amdgpu_ctx *ctx,
- struct amdgpu_ib *ibs,
- uint32_t num_ibs);
int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, void *data);
int amdgpu_cs_get_ring(struct amdgpu_device *adev, u32 ip_type,
@@ -2319,49 +2357,6 @@
unsigned long arg);
/*
- * vm
- */
-int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm);
-void amdgpu_vm_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm);
-struct amdgpu_bo_list_entry *amdgpu_vm_get_bos(struct amdgpu_device *adev,
- struct amdgpu_vm *vm,
- struct list_head *head);
-int amdgpu_vm_grab_id(struct amdgpu_vm *vm, struct amdgpu_ring *ring,
- struct amdgpu_sync *sync);
-void amdgpu_vm_flush(struct amdgpu_ring *ring,
- struct amdgpu_vm *vm,
- struct fence *updates);
-void amdgpu_vm_fence(struct amdgpu_device *adev,
- struct amdgpu_vm *vm,
- struct amdgpu_fence *fence);
-uint64_t amdgpu_vm_map_gart(struct amdgpu_device *adev, uint64_t addr);
-int amdgpu_vm_update_page_directory(struct amdgpu_device *adev,
- struct amdgpu_vm *vm);
-int amdgpu_vm_clear_freed(struct amdgpu_device *adev,
- struct amdgpu_vm *vm);
-int amdgpu_vm_clear_invalids(struct amdgpu_device *adev,
- struct amdgpu_vm *vm, struct amdgpu_sync *sync);
-int amdgpu_vm_bo_update(struct amdgpu_device *adev,
- struct amdgpu_bo_va *bo_va,
- struct ttm_mem_reg *mem);
-void amdgpu_vm_bo_invalidate(struct amdgpu_device *adev,
- struct amdgpu_bo *bo);
-struct amdgpu_bo_va *amdgpu_vm_bo_find(struct amdgpu_vm *vm,
- struct amdgpu_bo *bo);
-struct amdgpu_bo_va *amdgpu_vm_bo_add(struct amdgpu_device *adev,
- struct amdgpu_vm *vm,
- struct amdgpu_bo *bo);
-int amdgpu_vm_bo_map(struct amdgpu_device *adev,
- struct amdgpu_bo_va *bo_va,
- uint64_t addr, uint64_t offset,
- uint64_t size, uint32_t flags);
-int amdgpu_vm_bo_unmap(struct amdgpu_device *adev,
- struct amdgpu_bo_va *bo_va,
- uint64_t addr);
-void amdgpu_vm_bo_rmv(struct amdgpu_device *adev,
- struct amdgpu_bo_va *bo_va);
-int amdgpu_vm_free_job(struct amdgpu_job *job);
-/*
* functions used by amdgpu_encoder.c
*/
struct amdgpu_afmt_acr {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index dfc4d02..1d44d50 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -127,30 +127,6 @@
return 0;
}
-struct amdgpu_cs_parser *amdgpu_cs_parser_create(struct amdgpu_device *adev,
- struct drm_file *filp,
- struct amdgpu_ctx *ctx,
- struct amdgpu_ib *ibs,
- uint32_t num_ibs)
-{
- struct amdgpu_cs_parser *parser;
- int i;
-
- parser = kzalloc(sizeof(struct amdgpu_cs_parser), GFP_KERNEL);
- if (!parser)
- return NULL;
-
- parser->adev = adev;
- parser->filp = filp;
- parser->ctx = ctx;
- parser->ibs = ibs;
- parser->num_ibs = num_ibs;
- for (i = 0; i < num_ibs; i++)
- ibs[i].ctx = ctx;
-
- return parser;
-}
-
int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, void *data)
{
union drm_amdgpu_cs *cs = data;
@@ -463,8 +439,18 @@
return (int)la->robj->tbo.num_pages - (int)lb->robj->tbo.num_pages;
}
-static void amdgpu_cs_parser_fini_early(struct amdgpu_cs_parser *parser, int error, bool backoff)
+/**
+ * cs_parser_fini() - clean parser states
+ * @parser: parser structure holding parsing context.
+ * @error: error number
+ *
+ * If error is set than unvalidate buffer, otherwise just free memory
+ * used by parsing context.
+ **/
+static void amdgpu_cs_parser_fini(struct amdgpu_cs_parser *parser, int error, bool backoff)
{
+ unsigned i;
+
if (!error) {
/* Sort the buffer list from the smallest to largest buffer,
* which affects the order of buffers in the LRU list.
@@ -479,17 +465,14 @@
list_sort(NULL, &parser->validated, cmp_size_smaller_first);
ttm_eu_fence_buffer_objects(&parser->ticket,
- &parser->validated,
- &parser->ibs[parser->num_ibs-1].fence->base);
+ &parser->validated,
+ parser->fence);
} else if (backoff) {
ttm_eu_backoff_reservation(&parser->ticket,
&parser->validated);
}
-}
+ fence_put(parser->fence);
-static void amdgpu_cs_parser_fini_late(struct amdgpu_cs_parser *parser)
-{
- unsigned i;
if (parser->ctx)
amdgpu_ctx_put(parser->ctx);
if (parser->bo_list)
@@ -499,31 +482,12 @@
for (i = 0; i < parser->nchunks; i++)
drm_free_large(parser->chunks[i].kdata);
kfree(parser->chunks);
- if (!amdgpu_enable_scheduler)
- {
- if (parser->ibs)
- for (i = 0; i < parser->num_ibs; i++)
- amdgpu_ib_free(parser->adev, &parser->ibs[i]);
- kfree(parser->ibs);
- if (parser->uf.bo)
- drm_gem_object_unreference_unlocked(&parser->uf.bo->gem_base);
- }
-
- kfree(parser);
-}
-
-/**
- * cs_parser_fini() - clean parser states
- * @parser: parser structure holding parsing context.
- * @error: error number
- *
- * If error is set than unvalidate buffer, otherwise just free memory
- * used by parsing context.
- **/
-static void amdgpu_cs_parser_fini(struct amdgpu_cs_parser *parser, int error, bool backoff)
-{
- amdgpu_cs_parser_fini_early(parser, error, backoff);
- amdgpu_cs_parser_fini_late(parser);
+ if (parser->ibs)
+ for (i = 0; i < parser->num_ibs; i++)
+ amdgpu_ib_free(parser->adev, &parser->ibs[i]);
+ kfree(parser->ibs);
+ if (parser->uf.bo)
+ drm_gem_object_unreference_unlocked(&parser->uf.bo->gem_base);
}
static int amdgpu_bo_vm_update_pte(struct amdgpu_cs_parser *p,
@@ -610,15 +574,9 @@
}
r = amdgpu_bo_vm_update_pte(parser, vm);
- if (r) {
- goto out;
- }
- amdgpu_cs_sync_rings(parser);
- if (!amdgpu_enable_scheduler)
- r = amdgpu_ib_schedule(adev, parser->num_ibs, parser->ibs,
- parser->filp);
+ if (!r)
+ amdgpu_cs_sync_rings(parser);
-out:
return r;
}
@@ -826,38 +784,35 @@
{
struct amdgpu_device *adev = dev->dev_private;
union drm_amdgpu_cs *cs = data;
- struct amdgpu_fpriv *fpriv = filp->driver_priv;
- struct amdgpu_vm *vm = &fpriv->vm;
- struct amdgpu_cs_parser *parser;
+ struct amdgpu_cs_parser parser = {};
bool reserved_buffers = false;
int i, r;
if (!adev->accel_working)
return -EBUSY;
- parser = amdgpu_cs_parser_create(adev, filp, NULL, NULL, 0);
- if (!parser)
- return -ENOMEM;
- r = amdgpu_cs_parser_init(parser, data);
+ parser.adev = adev;
+ parser.filp = filp;
+
+ r = amdgpu_cs_parser_init(&parser, data);
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
- amdgpu_cs_parser_fini(parser, r, false);
+ amdgpu_cs_parser_fini(&parser, r, false);
r = amdgpu_cs_handle_lockup(adev, r);
return r;
}
- mutex_lock(&vm->mutex);
- r = amdgpu_cs_parser_relocs(parser);
+ r = amdgpu_cs_parser_relocs(&parser);
if (r == -ENOMEM)
DRM_ERROR("Not enough memory for command submission!\n");
else if (r && r != -ERESTARTSYS)
DRM_ERROR("Failed to process the buffer list %d!\n", r);
else if (!r) {
reserved_buffers = true;
- r = amdgpu_cs_ib_fill(adev, parser);
+ r = amdgpu_cs_ib_fill(adev, &parser);
}
if (!r) {
- r = amdgpu_cs_dependencies(adev, parser);
+ r = amdgpu_cs_dependencies(adev, &parser);
if (r)
DRM_ERROR("Failed in the dependencies handling %d!\n", r);
}
@@ -865,63 +820,71 @@
if (r)
goto out;
- for (i = 0; i < parser->num_ibs; i++)
- trace_amdgpu_cs(parser, i);
+ for (i = 0; i < parser.num_ibs; i++)
+ trace_amdgpu_cs(&parser, i);
- r = amdgpu_cs_ib_vm_chunk(adev, parser);
+ r = amdgpu_cs_ib_vm_chunk(adev, &parser);
if (r)
goto out;
- if (amdgpu_enable_scheduler && parser->num_ibs) {
+ if (amdgpu_enable_scheduler && parser.num_ibs) {
+ struct amdgpu_ring * ring = parser.ibs->ring;
+ struct amd_sched_fence *fence;
struct amdgpu_job *job;
- struct amdgpu_ring * ring = parser->ibs->ring;
+
job = kzalloc(sizeof(struct amdgpu_job), GFP_KERNEL);
if (!job) {
r = -ENOMEM;
goto out;
}
+
job->base.sched = &ring->sched;
- job->base.s_entity = &parser->ctx->rings[ring->idx].entity;
- job->adev = parser->adev;
- job->ibs = parser->ibs;
- job->num_ibs = parser->num_ibs;
- job->base.owner = parser->filp;
- mutex_init(&job->job_lock);
+ job->base.s_entity = &parser.ctx->rings[ring->idx].entity;
+ job->adev = parser.adev;
+ job->owner = parser.filp;
+ job->free_job = amdgpu_cs_free_job;
+
+ job->ibs = parser.ibs;
+ job->num_ibs = parser.num_ibs;
+ parser.ibs = NULL;
+ parser.num_ibs = 0;
+
if (job->ibs[job->num_ibs - 1].user) {
- memcpy(&job->uf, &parser->uf,
- sizeof(struct amdgpu_user_fence));
+ job->uf = parser.uf;
job->ibs[job->num_ibs - 1].user = &job->uf;
+ parser.uf.bo = NULL;
}
- job->free_job = amdgpu_cs_free_job;
- mutex_lock(&job->job_lock);
- r = amd_sched_entity_push_job(&job->base);
- if (r) {
- mutex_unlock(&job->job_lock);
+ fence = amd_sched_fence_create(job->base.s_entity,
+ parser.filp);
+ if (!fence) {
+ r = -ENOMEM;
amdgpu_cs_free_job(job);
kfree(job);
goto out;
}
- cs->out.handle =
- amdgpu_ctx_add_fence(parser->ctx, ring,
- &job->base.s_fence->base);
- parser->ibs[parser->num_ibs - 1].sequence = cs->out.handle;
+ job->base.s_fence = fence;
+ parser.fence = fence_get(&fence->base);
- list_sort(NULL, &parser->validated, cmp_size_smaller_first);
- ttm_eu_fence_buffer_objects(&parser->ticket,
- &parser->validated,
- &job->base.s_fence->base);
+ cs->out.handle = amdgpu_ctx_add_fence(parser.ctx, ring,
+ &fence->base);
+ job->ibs[job->num_ibs - 1].sequence = cs->out.handle;
- mutex_unlock(&job->job_lock);
- amdgpu_cs_parser_fini_late(parser);
- mutex_unlock(&vm->mutex);
- return 0;
+ trace_amdgpu_cs_ioctl(job);
+ amd_sched_entity_push_job(&job->base);
+
+ } else {
+ struct amdgpu_fence *fence;
+
+ r = amdgpu_ib_schedule(adev, parser.num_ibs, parser.ibs,
+ parser.filp);
+ fence = parser.ibs[parser.num_ibs - 1].fence;
+ parser.fence = fence_get(&fence->base);
+ cs->out.handle = parser.ibs[parser.num_ibs - 1].sequence;
}
- cs->out.handle = parser->ibs[parser->num_ibs - 1].sequence;
out:
- amdgpu_cs_parser_fini(parser, r, reserved_buffers);
- mutex_unlock(&vm->mutex);
+ amdgpu_cs_parser_fini(&parser, r, reserved_buffers);
r = amdgpu_cs_handle_lockup(adev, r);
return r;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index 257d722..3671f9f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -47,6 +47,9 @@
* that the the relevant GPU caches have been flushed.
*/
+static struct kmem_cache *amdgpu_fence_slab;
+static atomic_t amdgpu_fence_slab_ref = ATOMIC_INIT(0);
+
/**
* amdgpu_fence_write - write a fence value
*
@@ -85,24 +88,6 @@
}
/**
- * amdgpu_fence_schedule_check - schedule lockup check
- *
- * @ring: pointer to struct amdgpu_ring
- *
- * Queues a delayed work item to check for lockups.
- */
-static void amdgpu_fence_schedule_check(struct amdgpu_ring *ring)
-{
- /*
- * Do not reset the timer here with mod_delayed_work,
- * this can livelock in an interaction with TTM delayed destroy.
- */
- queue_delayed_work(system_power_efficient_wq,
- &ring->fence_drv.lockup_work,
- AMDGPU_FENCE_JIFFIES_TIMEOUT);
-}
-
-/**
* amdgpu_fence_emit - emit a fence on the requested ring
*
* @ring: ring the fence is associated with
@@ -118,7 +103,7 @@
struct amdgpu_device *adev = ring->adev;
/* we are protected by the ring emission mutex */
- *fence = kmalloc(sizeof(struct amdgpu_fence), GFP_KERNEL);
+ *fence = kmem_cache_alloc(amdgpu_fence_slab, GFP_KERNEL);
if ((*fence) == NULL) {
return -ENOMEM;
}
@@ -132,11 +117,23 @@
amdgpu_ring_emit_fence(ring, ring->fence_drv.gpu_addr,
(*fence)->seq,
AMDGPU_FENCE_FLAG_INT);
- trace_amdgpu_fence_emit(ring->adev->ddev, ring->idx, (*fence)->seq);
return 0;
}
/**
+ * amdgpu_fence_schedule_fallback - schedule fallback check
+ *
+ * @ring: pointer to struct amdgpu_ring
+ *
+ * Start a timer as fallback to our interrupts.
+ */
+static void amdgpu_fence_schedule_fallback(struct amdgpu_ring *ring)
+{
+ mod_timer(&ring->fence_drv.fallback_timer,
+ jiffies + AMDGPU_FENCE_JIFFIES_TIMEOUT);
+}
+
+/**
* amdgpu_fence_activity - check for fence activity
*
* @ring: pointer to struct amdgpu_ring
@@ -202,33 +199,12 @@
} while (atomic64_xchg(&ring->fence_drv.last_seq, seq) > seq);
if (seq < last_emitted)
- amdgpu_fence_schedule_check(ring);
+ amdgpu_fence_schedule_fallback(ring);
return wake;
}
/**
- * amdgpu_fence_check_lockup - check for hardware lockup
- *
- * @work: delayed work item
- *
- * Checks for fence activity and if there is none probe
- * the hardware if a lockup occured.
- */
-static void amdgpu_fence_check_lockup(struct work_struct *work)
-{
- struct amdgpu_fence_driver *fence_drv;
- struct amdgpu_ring *ring;
-
- fence_drv = container_of(work, struct amdgpu_fence_driver,
- lockup_work.work);
- ring = fence_drv->ring;
-
- if (amdgpu_fence_activity(ring))
- wake_up_all(&ring->fence_drv.fence_queue);
-}
-
-/**
* amdgpu_fence_process - process a fence
*
* @adev: amdgpu_device pointer
@@ -244,6 +220,20 @@
}
/**
+ * amdgpu_fence_fallback - fallback for hardware interrupts
+ *
+ * @work: delayed work item
+ *
+ * Checks for fence activity.
+ */
+static void amdgpu_fence_fallback(unsigned long arg)
+{
+ struct amdgpu_ring *ring = (void *)arg;
+
+ amdgpu_fence_process(ring);
+}
+
+/**
* amdgpu_fence_seq_signaled - check if a fence sequence number has signaled
*
* @ring: ring the fence is associated with
@@ -290,7 +280,7 @@
if (atomic64_read(&ring->fence_drv.last_seq) >= seq)
return 0;
- amdgpu_fence_schedule_check(ring);
+ amdgpu_fence_schedule_fallback(ring);
wait_event(ring->fence_drv.fence_queue, (
(signaled = amdgpu_fence_seq_signaled(ring, seq))));
@@ -491,9 +481,8 @@
atomic64_set(&ring->fence_drv.last_seq, 0);
ring->fence_drv.initialized = false;
- INIT_DELAYED_WORK(&ring->fence_drv.lockup_work,
- amdgpu_fence_check_lockup);
- ring->fence_drv.ring = ring;
+ setup_timer(&ring->fence_drv.fallback_timer, amdgpu_fence_fallback,
+ (unsigned long)ring);
init_waitqueue_head(&ring->fence_drv.fence_queue);
@@ -536,6 +525,13 @@
*/
int amdgpu_fence_driver_init(struct amdgpu_device *adev)
{
+ if (atomic_inc_return(&amdgpu_fence_slab_ref) == 1) {
+ amdgpu_fence_slab = kmem_cache_create(
+ "amdgpu_fence", sizeof(struct amdgpu_fence), 0,
+ SLAB_HWCACHE_ALIGN, NULL);
+ if (!amdgpu_fence_slab)
+ return -ENOMEM;
+ }
if (amdgpu_debugfs_fence_init(adev))
dev_err(adev->dev, "fence debugfs file creation failed\n");
@@ -554,9 +550,12 @@
{
int i, r;
+ if (atomic_dec_and_test(&amdgpu_fence_slab_ref))
+ kmem_cache_destroy(amdgpu_fence_slab);
mutex_lock(&adev->ring_lock);
for (i = 0; i < AMDGPU_MAX_RINGS; i++) {
struct amdgpu_ring *ring = adev->rings[i];
+
if (!ring || !ring->fence_drv.initialized)
continue;
r = amdgpu_fence_wait_empty(ring);
@@ -568,6 +567,7 @@
amdgpu_irq_put(adev, ring->fence_drv.irq_src,
ring->fence_drv.irq_type);
amd_sched_fini(&ring->sched);
+ del_timer_sync(&ring->fence_drv.fallback_timer);
ring->fence_drv.initialized = false;
}
mutex_unlock(&adev->ring_lock);
@@ -751,18 +751,25 @@
fence->fence_wake.func = amdgpu_fence_check_signaled;
__add_wait_queue(&ring->fence_drv.fence_queue, &fence->fence_wake);
fence_get(f);
- amdgpu_fence_schedule_check(ring);
+ if (!timer_pending(&ring->fence_drv.fallback_timer))
+ amdgpu_fence_schedule_fallback(ring);
FENCE_TRACE(&fence->base, "armed on ring %i!\n", ring->idx);
return true;
}
+static void amdgpu_fence_release(struct fence *f)
+{
+ struct amdgpu_fence *fence = to_amdgpu_fence(f);
+ kmem_cache_free(amdgpu_fence_slab, fence);
+}
+
const struct fence_ops amdgpu_fence_ops = {
.get_driver_name = amdgpu_fence_get_driver_name,
.get_timeline_name = amdgpu_fence_get_timeline_name,
.enable_signaling = amdgpu_fence_enable_signaling,
.signaled = amdgpu_fence_is_signaled,
.wait = fence_default_wait,
- .release = NULL,
+ .release = amdgpu_fence_release,
};
/*
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
index 0873328..fc32fc0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -115,12 +115,9 @@
struct amdgpu_vm *vm = &fpriv->vm;
struct amdgpu_bo_va *bo_va;
int r;
- mutex_lock(&vm->mutex);
r = amdgpu_bo_reserve(rbo, false);
- if (r) {
- mutex_unlock(&vm->mutex);
+ if (r)
return r;
- }
bo_va = amdgpu_vm_bo_find(vm, rbo);
if (!bo_va) {
@@ -129,7 +126,6 @@
++bo_va->ref_count;
}
amdgpu_bo_unreserve(rbo);
- mutex_unlock(&vm->mutex);
return 0;
}
@@ -142,10 +138,8 @@
struct amdgpu_vm *vm = &fpriv->vm;
struct amdgpu_bo_va *bo_va;
int r;
- mutex_lock(&vm->mutex);
r = amdgpu_bo_reserve(rbo, true);
if (r) {
- mutex_unlock(&vm->mutex);
dev_err(adev->dev, "leaking bo va because "
"we fail to reserve bo (%d)\n", r);
return;
@@ -157,7 +151,6 @@
}
}
amdgpu_bo_unreserve(rbo);
- mutex_unlock(&vm->mutex);
}
static int amdgpu_gem_handle_lockup(struct amdgpu_device *adev, int r)
@@ -483,6 +476,9 @@
if (domain == AMDGPU_GEM_DOMAIN_CPU)
goto error_unreserve;
}
+ r = amdgpu_vm_update_page_directory(adev, bo_va->vm);
+ if (r)
+ goto error_unreserve;
r = amdgpu_vm_clear_freed(adev, bo_va->vm);
if (r)
@@ -512,6 +508,9 @@
struct amdgpu_fpriv *fpriv = filp->driver_priv;
struct amdgpu_bo *rbo;
struct amdgpu_bo_va *bo_va;
+ struct ttm_validate_buffer tv, tv_pd;
+ struct ww_acquire_ctx ticket;
+ struct list_head list, duplicates;
uint32_t invalid_flags, va_flags = 0;
int r = 0;
@@ -547,19 +546,28 @@
gobj = drm_gem_object_lookup(dev, filp, args->handle);
if (gobj == NULL)
return -ENOENT;
- mutex_lock(&fpriv->vm.mutex);
rbo = gem_to_amdgpu_bo(gobj);
- r = amdgpu_bo_reserve(rbo, false);
+ INIT_LIST_HEAD(&list);
+ INIT_LIST_HEAD(&duplicates);
+ tv.bo = &rbo->tbo;
+ tv.shared = true;
+ list_add(&tv.head, &list);
+
+ if (args->operation == AMDGPU_VA_OP_MAP) {
+ tv_pd.bo = &fpriv->vm.page_directory->tbo;
+ tv_pd.shared = true;
+ list_add(&tv_pd.head, &list);
+ }
+ r = ttm_eu_reserve_buffers(&ticket, &list, true, &duplicates);
if (r) {
- mutex_unlock(&fpriv->vm.mutex);
drm_gem_object_unreference_unlocked(gobj);
return r;
}
bo_va = amdgpu_vm_bo_find(&fpriv->vm, rbo);
if (!bo_va) {
- amdgpu_bo_unreserve(rbo);
- mutex_unlock(&fpriv->vm.mutex);
+ ttm_eu_backoff_reservation(&ticket, &list);
+ drm_gem_object_unreference_unlocked(gobj);
return -ENOENT;
}
@@ -581,10 +589,10 @@
default:
break;
}
-
+ ttm_eu_backoff_reservation(&ticket, &list);
if (!r && !(args->flags & AMDGPU_VM_DELAY_UPDATE))
amdgpu_gem_va_update_vm(adev, bo_va, args->operation);
- mutex_unlock(&fpriv->vm.mutex);
+
drm_gem_object_unreference_unlocked(gobj);
return r;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
index e659877..9e25eda 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
@@ -62,7 +62,7 @@
int r;
if (size) {
- r = amdgpu_sa_bo_new(adev, &adev->ring_tmp_bo,
+ r = amdgpu_sa_bo_new(&adev->ring_tmp_bo,
&ib->sa_bo, size, 256);
if (r) {
dev_err(adev->dev, "failed to get a new IB (%d)\n", r);
@@ -216,7 +216,7 @@
}
if (ib->vm)
- amdgpu_vm_fence(adev, ib->vm, ib->fence);
+ amdgpu_vm_fence(adev, ib->vm, &ib->fence->base);
amdgpu_ring_unlock_commit(ring);
return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
index 3c2ff45..ea756e7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h
@@ -189,10 +189,9 @@
struct amdgpu_sa_manager *sa_manager);
int amdgpu_sa_bo_manager_suspend(struct amdgpu_device *adev,
struct amdgpu_sa_manager *sa_manager);
-int amdgpu_sa_bo_new(struct amdgpu_device *adev,
- struct amdgpu_sa_manager *sa_manager,
- struct amdgpu_sa_bo **sa_bo,
- unsigned size, unsigned align);
+int amdgpu_sa_bo_new(struct amdgpu_sa_manager *sa_manager,
+ struct amdgpu_sa_bo **sa_bo,
+ unsigned size, unsigned align);
void amdgpu_sa_bo_free(struct amdgpu_device *adev,
struct amdgpu_sa_bo **sa_bo,
struct fence *fence);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c
index 0212b31..8b88edb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c
@@ -311,8 +311,7 @@
return false;
}
-int amdgpu_sa_bo_new(struct amdgpu_device *adev,
- struct amdgpu_sa_manager *sa_manager,
+int amdgpu_sa_bo_new(struct amdgpu_sa_manager *sa_manager,
struct amdgpu_sa_bo **sa_bo,
unsigned size, unsigned align)
{
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c
index dcf4a8a..438c052 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c
@@ -26,6 +26,7 @@
#include <linux/sched.h>
#include <drm/drmP.h>
#include "amdgpu.h"
+#include "amdgpu_trace.h"
static struct fence *amdgpu_sched_dependency(struct amd_sched_job *sched_job)
{
@@ -44,11 +45,8 @@
return NULL;
}
job = to_amdgpu_job(sched_job);
- mutex_lock(&job->job_lock);
- r = amdgpu_ib_schedule(job->adev,
- job->num_ibs,
- job->ibs,
- job->base.owner);
+ trace_amdgpu_sched_run_job(job);
+ r = amdgpu_ib_schedule(job->adev, job->num_ibs, job->ibs, job->owner);
if (r) {
DRM_ERROR("Error scheduling IBs (%d)\n", r);
goto err;
@@ -61,8 +59,6 @@
if (job->free_job)
job->free_job(job);
- mutex_unlock(&job->job_lock);
- fence_put(&job->base.s_fence->base);
kfree(job);
return fence ? &fence->base : NULL;
}
@@ -88,21 +84,19 @@
return -ENOMEM;
job->base.sched = &ring->sched;
job->base.s_entity = &adev->kernel_ctx.rings[ring->idx].entity;
+ job->base.s_fence = amd_sched_fence_create(job->base.s_entity, owner);
+ if (!job->base.s_fence) {
+ kfree(job);
+ return -ENOMEM;
+ }
+ *f = fence_get(&job->base.s_fence->base);
+
job->adev = adev;
job->ibs = ibs;
job->num_ibs = num_ibs;
- job->base.owner = owner;
- mutex_init(&job->job_lock);
+ job->owner = owner;
job->free_job = free_job;
- mutex_lock(&job->job_lock);
- r = amd_sched_entity_push_job(&job->base);
- if (r) {
- mutex_unlock(&job->job_lock);
- kfree(job);
- return r;
- }
- *f = fence_get(&job->base.s_fence->base);
- mutex_unlock(&job->job_lock);
+ amd_sched_entity_push_job(&job->base);
} else {
r = amdgpu_ib_schedule(adev, num_ibs, ibs, owner);
if (r)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_semaphore.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_semaphore.c
index ff3ca52..1caaf20 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_semaphore.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_semaphore.c
@@ -40,7 +40,7 @@
if (*semaphore == NULL) {
return -ENOMEM;
}
- r = amdgpu_sa_bo_new(adev, &adev->ring_tmp_bo,
+ r = amdgpu_sa_bo_new(&adev->ring_tmp_bo,
&(*semaphore)->sa_bo, 8, 8);
if (r) {
kfree(*semaphore);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
index a6697fd..dd005c3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c
@@ -302,8 +302,14 @@
return -EINVAL;
}
- if (amdgpu_enable_scheduler || !amdgpu_enable_semaphores ||
- (count >= AMDGPU_NUM_SYNCS)) {
+ if (amdgpu_enable_scheduler || !amdgpu_enable_semaphores) {
+ r = fence_wait(&fence->base, true);
+ if (r)
+ return r;
+ continue;
+ }
+
+ if (count >= AMDGPU_NUM_SYNCS) {
/* not enough room, wait manually */
r = fence_wait(&fence->base, false);
if (r)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
index 76ecbaf..8f9834ab 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_trace.h
@@ -48,6 +48,57 @@
__entry->fences)
);
+TRACE_EVENT(amdgpu_cs_ioctl,
+ TP_PROTO(struct amdgpu_job *job),
+ TP_ARGS(job),
+ TP_STRUCT__entry(
+ __field(struct amdgpu_device *, adev)
+ __field(struct amd_sched_job *, sched_job)
+ __field(struct amdgpu_ib *, ib)
+ __field(struct fence *, fence)
+ __field(char *, ring_name)
+ __field(u32, num_ibs)
+ ),
+
+ TP_fast_assign(
+ __entry->adev = job->adev;
+ __entry->sched_job = &job->base;
+ __entry->ib = job->ibs;
+ __entry->fence = &job->base.s_fence->base;
+ __entry->ring_name = job->ibs[0].ring->name;
+ __entry->num_ibs = job->num_ibs;
+ ),
+ TP_printk("adev=%p, sched_job=%p, first ib=%p, sched fence=%p, ring name:%s, num_ibs:%u",
+ __entry->adev, __entry->sched_job, __entry->ib,
+ __entry->fence, __entry->ring_name, __entry->num_ibs)
+);
+
+TRACE_EVENT(amdgpu_sched_run_job,
+ TP_PROTO(struct amdgpu_job *job),
+ TP_ARGS(job),
+ TP_STRUCT__entry(
+ __field(struct amdgpu_device *, adev)
+ __field(struct amd_sched_job *, sched_job)
+ __field(struct amdgpu_ib *, ib)
+ __field(struct fence *, fence)
+ __field(char *, ring_name)
+ __field(u32, num_ibs)
+ ),
+
+ TP_fast_assign(
+ __entry->adev = job->adev;
+ __entry->sched_job = &job->base;
+ __entry->ib = job->ibs;
+ __entry->fence = &job->base.s_fence->base;
+ __entry->ring_name = job->ibs[0].ring->name;
+ __entry->num_ibs = job->num_ibs;
+ ),
+ TP_printk("adev=%p, sched_job=%p, first ib=%p, sched fence=%p, ring name:%s, num_ibs:%u",
+ __entry->adev, __entry->sched_job, __entry->ib,
+ __entry->fence, __entry->ring_name, __entry->num_ibs)
+);
+
+
TRACE_EVENT(amdgpu_vm_grab_id,
TP_PROTO(unsigned vmid, int ring),
TP_ARGS(vmid, ring),
@@ -196,49 +247,6 @@
TP_printk("list=%p, bo=%p", __entry->list, __entry->bo)
);
-DECLARE_EVENT_CLASS(amdgpu_fence_request,
-
- TP_PROTO(struct drm_device *dev, int ring, u32 seqno),
-
- TP_ARGS(dev, ring, seqno),
-
- TP_STRUCT__entry(
- __field(u32, dev)
- __field(int, ring)
- __field(u32, seqno)
- ),
-
- TP_fast_assign(
- __entry->dev = dev->primary->index;
- __entry->ring = ring;
- __entry->seqno = seqno;
- ),
-
- TP_printk("dev=%u, ring=%d, seqno=%u",
- __entry->dev, __entry->ring, __entry->seqno)
-);
-
-DEFINE_EVENT(amdgpu_fence_request, amdgpu_fence_emit,
-
- TP_PROTO(struct drm_device *dev, int ring, u32 seqno),
-
- TP_ARGS(dev, ring, seqno)
-);
-
-DEFINE_EVENT(amdgpu_fence_request, amdgpu_fence_wait_begin,
-
- TP_PROTO(struct drm_device *dev, int ring, u32 seqno),
-
- TP_ARGS(dev, ring, seqno)
-);
-
-DEFINE_EVENT(amdgpu_fence_request, amdgpu_fence_wait_end,
-
- TP_PROTO(struct drm_device *dev, int ring, u32 seqno),
-
- TP_ARGS(dev, ring, seqno)
-);
-
DECLARE_EVENT_CLASS(amdgpu_semaphore_request,
TP_PROTO(int ring, struct amdgpu_semaphore *sem),
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 81bb8e9..d4bac5f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -1073,10 +1073,10 @@
ret = drm_mm_dump_table(m, mm);
spin_unlock(&glob->lru_lock);
if (ttm_pl == TTM_PL_VRAM)
- seq_printf(m, "man size:%llu pages, ram usage:%luMB, vis usage:%luMB\n",
+ seq_printf(m, "man size:%llu pages, ram usage:%lluMB, vis usage:%lluMB\n",
adev->mman.bdev.man[ttm_pl].size,
- atomic64_read(&adev->vram_usage) >> 20,
- atomic64_read(&adev->vram_vis_usage) >> 20);
+ (u64)atomic64_read(&adev->vram_usage) >> 20,
+ (u64)atomic64_read(&adev->vram_vis_usage) >> 20);
return ret;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
index 03f0c3b..a745eee 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c
@@ -392,7 +392,10 @@
ib->ptr[ib->length_dw++] = 0x00000001; /* session cmd */
ib->ptr[ib->length_dw++] = handle;
- ib->ptr[ib->length_dw++] = 0x00000030; /* len */
+ if ((ring->adev->vce.fw_version >> 24) >= 52)
+ ib->ptr[ib->length_dw++] = 0x00000040; /* len */
+ else
+ ib->ptr[ib->length_dw++] = 0x00000030; /* len */
ib->ptr[ib->length_dw++] = 0x01000001; /* create cmd */
ib->ptr[ib->length_dw++] = 0x00000000;
ib->ptr[ib->length_dw++] = 0x00000042;
@@ -404,6 +407,12 @@
ib->ptr[ib->length_dw++] = 0x00000100;
ib->ptr[ib->length_dw++] = 0x0000000c;
ib->ptr[ib->length_dw++] = 0x00000000;
+ if ((ring->adev->vce.fw_version >> 24) >= 52) {
+ ib->ptr[ib->length_dw++] = 0x00000000;
+ ib->ptr[ib->length_dw++] = 0x00000000;
+ ib->ptr[ib->length_dw++] = 0x00000000;
+ ib->ptr[ib->length_dw++] = 0x00000000;
+ }
ib->ptr[ib->length_dw++] = 0x00000014; /* len */
ib->ptr[ib->length_dw++] = 0x05000005; /* feedback buffer */
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 633a32a..ae037e5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -143,10 +143,15 @@
unsigned i;
/* check if the id is still valid */
- if (vm_id->id && vm_id->last_id_use &&
- vm_id->last_id_use == adev->vm_manager.active[vm_id->id]) {
- trace_amdgpu_vm_grab_id(vm_id->id, ring->idx);
- return 0;
+ if (vm_id->id) {
+ unsigned id = vm_id->id;
+ long owner;
+
+ owner = atomic_long_read(&adev->vm_manager.ids[id].owner);
+ if (owner == (long)vm) {
+ trace_amdgpu_vm_grab_id(vm_id->id, ring->idx);
+ return 0;
+ }
}
/* we definately need to flush */
@@ -154,7 +159,7 @@
/* skip over VMID 0, since it is the system VM */
for (i = 1; i < adev->vm_manager.nvm; ++i) {
- struct fence *fence = adev->vm_manager.active[i];
+ struct fence *fence = adev->vm_manager.ids[i].active;
struct amdgpu_ring *fring;
if (fence == NULL) {
@@ -176,7 +181,7 @@
if (choices[i]) {
struct fence *fence;
- fence = adev->vm_manager.active[choices[i]];
+ fence = adev->vm_manager.ids[choices[i]].active;
vm_id->id = choices[i];
trace_amdgpu_vm_grab_id(choices[i], ring->idx);
@@ -207,24 +212,21 @@
uint64_t pd_addr = amdgpu_bo_gpu_offset(vm->page_directory);
struct amdgpu_vm_id *vm_id = &vm->ids[ring->idx];
struct fence *flushed_updates = vm_id->flushed_updates;
- bool is_earlier = false;
+ bool is_later;
- if (flushed_updates && updates) {
- BUG_ON(flushed_updates->context != updates->context);
- is_earlier = (updates->seqno - flushed_updates->seqno <=
- INT_MAX) ? true : false;
- }
+ if (!flushed_updates)
+ is_later = true;
+ else if (!updates)
+ is_later = false;
+ else
+ is_later = fence_is_later(updates, flushed_updates);
- if (pd_addr != vm_id->pd_gpu_addr || !flushed_updates ||
- is_earlier) {
-
+ if (pd_addr != vm_id->pd_gpu_addr || is_later) {
trace_amdgpu_vm_flush(pd_addr, ring->idx, vm_id->id);
- if (is_earlier) {
+ if (is_later) {
vm_id->flushed_updates = fence_get(updates);
fence_put(flushed_updates);
}
- if (!flushed_updates)
- vm_id->flushed_updates = fence_get(updates);
vm_id->pd_gpu_addr = pd_addr;
amdgpu_ring_emit_vm_flush(ring, vm_id->id, vm_id->pd_gpu_addr);
}
@@ -244,16 +246,14 @@
*/
void amdgpu_vm_fence(struct amdgpu_device *adev,
struct amdgpu_vm *vm,
- struct amdgpu_fence *fence)
+ struct fence *fence)
{
- unsigned ridx = fence->ring->idx;
- unsigned vm_id = vm->ids[ridx].id;
+ struct amdgpu_ring *ring = amdgpu_ring_from_fence(fence);
+ unsigned vm_id = vm->ids[ring->idx].id;
- fence_put(adev->vm_manager.active[vm_id]);
- adev->vm_manager.active[vm_id] = fence_get(&fence->base);
-
- fence_put(vm->ids[ridx].last_id_use);
- vm->ids[ridx].last_id_use = fence_get(&fence->base);
+ fence_put(adev->vm_manager.ids[vm_id].active);
+ adev->vm_manager.ids[vm_id].active = fence_get(fence);
+ atomic_long_set(&adev->vm_manager.ids[vm_id].owner, (long)vm);
}
/**
@@ -332,6 +332,8 @@
*
* @adev: amdgpu_device pointer
* @bo: bo to clear
+ *
+ * need to reserve bo first before calling it.
*/
static int amdgpu_vm_clear_bo(struct amdgpu_device *adev,
struct amdgpu_bo *bo)
@@ -343,24 +345,20 @@
uint64_t addr;
int r;
- r = amdgpu_bo_reserve(bo, false);
- if (r)
- return r;
-
r = reservation_object_reserve_shared(bo->tbo.resv);
if (r)
return r;
r = ttm_bo_validate(&bo->tbo, &bo->placement, true, false);
if (r)
- goto error_unreserve;
+ goto error;
addr = amdgpu_bo_gpu_offset(bo);
entries = amdgpu_bo_size(bo) / 8;
ib = kzalloc(sizeof(struct amdgpu_ib), GFP_KERNEL);
if (!ib)
- goto error_unreserve;
+ goto error;
r = amdgpu_ib_get(ring, NULL, entries * 2 + 64, ib);
if (r)
@@ -378,16 +376,14 @@
if (!r)
amdgpu_bo_fence(bo, fence, true);
fence_put(fence);
- if (amdgpu_enable_scheduler) {
- amdgpu_bo_unreserve(bo);
+ if (amdgpu_enable_scheduler)
return 0;
- }
+
error_free:
amdgpu_ib_free(adev, ib);
kfree(ib);
-error_unreserve:
- amdgpu_bo_unreserve(bo);
+error:
return r;
}
@@ -926,8 +922,9 @@
bo_va = list_first_entry(&vm->invalidated,
struct amdgpu_bo_va, vm_status);
spin_unlock(&vm->status_lock);
-
+ mutex_lock(&bo_va->mutex);
r = amdgpu_vm_bo_update(adev, bo_va, NULL);
+ mutex_unlock(&bo_va->mutex);
if (r)
return r;
@@ -971,7 +968,7 @@
INIT_LIST_HEAD(&bo_va->valids);
INIT_LIST_HEAD(&bo_va->invalids);
INIT_LIST_HEAD(&bo_va->vm_status);
-
+ mutex_init(&bo_va->mutex);
list_add_tail(&bo_va->bo_list, &bo->va);
return bo_va;
@@ -989,7 +986,7 @@
* Add a mapping of the BO at the specefied addr into the VM.
* Returns 0 for success, error for failure.
*
- * Object has to be reserved and gets unreserved by this function!
+ * Object has to be reserved and unreserved outside!
*/
int amdgpu_vm_bo_map(struct amdgpu_device *adev,
struct amdgpu_bo_va *bo_va,
@@ -1005,30 +1002,27 @@
/* validate the parameters */
if (saddr & AMDGPU_GPU_PAGE_MASK || offset & AMDGPU_GPU_PAGE_MASK ||
- size == 0 || size & AMDGPU_GPU_PAGE_MASK) {
- amdgpu_bo_unreserve(bo_va->bo);
+ size == 0 || size & AMDGPU_GPU_PAGE_MASK)
return -EINVAL;
- }
/* make sure object fit at this offset */
eaddr = saddr + size;
- if ((saddr >= eaddr) || (offset + size > amdgpu_bo_size(bo_va->bo))) {
- amdgpu_bo_unreserve(bo_va->bo);
+ if ((saddr >= eaddr) || (offset + size > amdgpu_bo_size(bo_va->bo)))
return -EINVAL;
- }
last_pfn = eaddr / AMDGPU_GPU_PAGE_SIZE;
if (last_pfn > adev->vm_manager.max_pfn) {
dev_err(adev->dev, "va above limit (0x%08X > 0x%08X)\n",
last_pfn, adev->vm_manager.max_pfn);
- amdgpu_bo_unreserve(bo_va->bo);
return -EINVAL;
}
saddr /= AMDGPU_GPU_PAGE_SIZE;
eaddr /= AMDGPU_GPU_PAGE_SIZE;
+ spin_lock(&vm->it_lock);
it = interval_tree_iter_first(&vm->va, saddr, eaddr - 1);
+ spin_unlock(&vm->it_lock);
if (it) {
struct amdgpu_bo_va_mapping *tmp;
tmp = container_of(it, struct amdgpu_bo_va_mapping, it);
@@ -1036,14 +1030,12 @@
dev_err(adev->dev, "bo %p va 0x%010Lx-0x%010Lx conflict with "
"0x%010lx-0x%010lx\n", bo_va->bo, saddr, eaddr,
tmp->it.start, tmp->it.last + 1);
- amdgpu_bo_unreserve(bo_va->bo);
r = -EINVAL;
goto error;
}
mapping = kmalloc(sizeof(*mapping), GFP_KERNEL);
if (!mapping) {
- amdgpu_bo_unreserve(bo_va->bo);
r = -ENOMEM;
goto error;
}
@@ -1054,8 +1046,12 @@
mapping->offset = offset;
mapping->flags = flags;
+ mutex_lock(&bo_va->mutex);
list_add(&mapping->list, &bo_va->invalids);
+ mutex_unlock(&bo_va->mutex);
+ spin_lock(&vm->it_lock);
interval_tree_insert(&mapping->it, &vm->va);
+ spin_unlock(&vm->it_lock);
trace_amdgpu_vm_bo_map(bo_va, mapping);
/* Make sure the page tables are allocated */
@@ -1067,8 +1063,6 @@
if (eaddr > vm->max_pde_used)
vm->max_pde_used = eaddr;
- amdgpu_bo_unreserve(bo_va->bo);
-
/* walk over the address space and allocate the page tables */
for (pt_idx = saddr; pt_idx <= eaddr; ++pt_idx) {
struct reservation_object *resv = vm->page_directory->tbo.resv;
@@ -1077,13 +1071,11 @@
if (vm->page_tables[pt_idx].bo)
continue;
- ww_mutex_lock(&resv->lock, NULL);
r = amdgpu_bo_create(adev, AMDGPU_VM_PTE_COUNT * 8,
AMDGPU_GPU_PAGE_SIZE, true,
AMDGPU_GEM_DOMAIN_VRAM,
AMDGPU_GEM_CREATE_NO_CPU_ACCESS,
NULL, resv, &pt);
- ww_mutex_unlock(&resv->lock);
if (r)
goto error_free;
@@ -1101,7 +1093,9 @@
error_free:
list_del(&mapping->list);
+ spin_lock(&vm->it_lock);
interval_tree_remove(&mapping->it, &vm->va);
+ spin_unlock(&vm->it_lock);
trace_amdgpu_vm_bo_unmap(bo_va, mapping);
kfree(mapping);
@@ -1119,7 +1113,7 @@
* Remove a mapping of the BO at the specefied addr from the VM.
* Returns 0 for success, error for failure.
*
- * Object has to be reserved and gets unreserved by this function!
+ * Object has to be reserved and unreserved outside!
*/
int amdgpu_vm_bo_unmap(struct amdgpu_device *adev,
struct amdgpu_bo_va *bo_va,
@@ -1130,7 +1124,7 @@
bool valid = true;
saddr /= AMDGPU_GPU_PAGE_SIZE;
-
+ mutex_lock(&bo_va->mutex);
list_for_each_entry(mapping, &bo_va->valids, list) {
if (mapping->it.start == saddr)
break;
@@ -1145,20 +1139,21 @@
}
if (&mapping->list == &bo_va->invalids) {
- amdgpu_bo_unreserve(bo_va->bo);
+ mutex_unlock(&bo_va->mutex);
return -ENOENT;
}
}
-
+ mutex_unlock(&bo_va->mutex);
list_del(&mapping->list);
+ spin_lock(&vm->it_lock);
interval_tree_remove(&mapping->it, &vm->va);
+ spin_unlock(&vm->it_lock);
trace_amdgpu_vm_bo_unmap(bo_va, mapping);
if (valid)
list_add(&mapping->list, &vm->freed);
else
kfree(mapping);
- amdgpu_bo_unreserve(bo_va->bo);
return 0;
}
@@ -1187,17 +1182,21 @@
list_for_each_entry_safe(mapping, next, &bo_va->valids, list) {
list_del(&mapping->list);
+ spin_lock(&vm->it_lock);
interval_tree_remove(&mapping->it, &vm->va);
+ spin_unlock(&vm->it_lock);
trace_amdgpu_vm_bo_unmap(bo_va, mapping);
list_add(&mapping->list, &vm->freed);
}
list_for_each_entry_safe(mapping, next, &bo_va->invalids, list) {
list_del(&mapping->list);
+ spin_lock(&vm->it_lock);
interval_tree_remove(&mapping->it, &vm->va);
+ spin_unlock(&vm->it_lock);
kfree(mapping);
}
-
fence_put(bo_va->last_pt_update);
+ mutex_destroy(&bo_va->mutex);
kfree(bo_va);
}
@@ -1241,15 +1240,13 @@
for (i = 0; i < AMDGPU_MAX_RINGS; ++i) {
vm->ids[i].id = 0;
vm->ids[i].flushed_updates = NULL;
- vm->ids[i].last_id_use = NULL;
}
- mutex_init(&vm->mutex);
vm->va = RB_ROOT;
spin_lock_init(&vm->status_lock);
INIT_LIST_HEAD(&vm->invalidated);
INIT_LIST_HEAD(&vm->cleared);
INIT_LIST_HEAD(&vm->freed);
-
+ spin_lock_init(&vm->it_lock);
pd_size = amdgpu_vm_directory_size(adev);
pd_entries = amdgpu_vm_num_pdes(adev);
@@ -1269,8 +1266,14 @@
NULL, NULL, &vm->page_directory);
if (r)
return r;
-
+ r = amdgpu_bo_reserve(vm->page_directory, false);
+ if (r) {
+ amdgpu_bo_unref(&vm->page_directory);
+ vm->page_directory = NULL;
+ return r;
+ }
r = amdgpu_vm_clear_bo(adev, vm->page_directory);
+ amdgpu_bo_unreserve(vm->page_directory);
if (r) {
amdgpu_bo_unref(&vm->page_directory);
vm->page_directory = NULL;
@@ -1313,11 +1316,27 @@
amdgpu_bo_unref(&vm->page_directory);
fence_put(vm->page_directory_fence);
-
for (i = 0; i < AMDGPU_MAX_RINGS; ++i) {
+ unsigned id = vm->ids[i].id;
+
+ atomic_long_cmpxchg(&adev->vm_manager.ids[id].owner,
+ (long)vm, 0);
fence_put(vm->ids[i].flushed_updates);
- fence_put(vm->ids[i].last_id_use);
}
- mutex_destroy(&vm->mutex);
+}
+
+/**
+ * amdgpu_vm_manager_fini - cleanup VM manager
+ *
+ * @adev: amdgpu_device pointer
+ *
+ * Cleanup the VM manager and free resources.
+ */
+void amdgpu_vm_manager_fini(struct amdgpu_device *adev)
+{
+ unsigned i;
+
+ for (i = 0; i < AMDGPU_NUM_VM; ++i)
+ fence_put(adev->vm_manager.ids[i].active);
}
diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c
index a1a35a5..57a2e34 100644
--- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c
+++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c
@@ -6569,12 +6569,12 @@
switch (state) {
case AMDGPU_IRQ_STATE_DISABLE:
cg_thermal_int = RREG32_SMC(ixCG_THERMAL_INT);
- cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
+ cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
WREG32_SMC(ixCG_THERMAL_INT, cg_thermal_int);
break;
case AMDGPU_IRQ_STATE_ENABLE:
cg_thermal_int = RREG32_SMC(ixCG_THERMAL_INT);
- cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
+ cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK;
WREG32_SMC(ixCG_THERMAL_INT, cg_thermal_int);
break;
default:
@@ -6586,12 +6586,12 @@
switch (state) {
case AMDGPU_IRQ_STATE_DISABLE:
cg_thermal_int = RREG32_SMC(ixCG_THERMAL_INT);
- cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
+ cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
WREG32_SMC(ixCG_THERMAL_INT, cg_thermal_int);
break;
case AMDGPU_IRQ_STATE_ENABLE:
cg_thermal_int = RREG32_SMC(ixCG_THERMAL_INT);
- cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
+ cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK;
WREG32_SMC(ixCG_THERMAL_INT, cg_thermal_int);
break;
default:
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 6776cf7..e1dcab9 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -268,7 +268,6 @@
mmCGTT_CP_CLK_CTRL, 0xffffffff, 0x00000100,
mmCGTT_CPC_CLK_CTRL, 0xffffffff, 0x00000100,
mmCGTT_CPF_CLK_CTRL, 0xffffffff, 0x40000100,
- mmCGTT_DRM_CLK_CTRL0, 0xffffffff, 0x00600100,
mmCGTT_GDS_CLK_CTRL, 0xffffffff, 0x00000100,
mmCGTT_IA_CLK_CTRL, 0xffffffff, 0x06000100,
mmCGTT_PA_CLK_CTRL, 0xffffffff, 0x00000100,
@@ -296,10 +295,6 @@
mmCGTS_SM_CTRL_REG, 0xffffffff, 0x96e00200,
mmCP_RB_WPTR_POLL_CNTL, 0xffffffff, 0x00900100,
mmRLC_CGCG_CGLS_CTRL, 0xffffffff, 0x0020003c,
- mmPCIE_INDEX, 0xffffffff, 0x0140001c,
- mmPCIE_DATA, 0x000f0000, 0x00000000,
- mmCGTT_DRM_CLK_CTRL0, 0xff000fff, 0x00000100,
- mmHDP_XDP_CGTT_BLK_CTRL, 0xc0000fff, 0x00000104,
mmCP_MEM_SLP_CNTL, 0x00000001, 0x00000001,
};
@@ -1000,7 +995,7 @@
adev->gfx.config.max_cu_per_sh = 16;
adev->gfx.config.max_sh_per_se = 1;
adev->gfx.config.max_backends_per_se = 4;
- adev->gfx.config.max_texture_channel_caches = 8;
+ adev->gfx.config.max_texture_channel_caches = 16;
adev->gfx.config.max_gprs = 256;
adev->gfx.config.max_gs_threads = 32;
adev->gfx.config.max_hw_contexts = 8;
@@ -1613,6 +1608,296 @@
WREG32(mmGB_MACROTILE_MODE0 + reg_offset, gb_tile_moden);
}
case CHIP_FIJI:
+ for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) {
+ switch (reg_offset) {
+ case 0:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_64B) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 1:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_128B) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 2:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_256B) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 3:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_512B) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 4:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_2KB) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 5:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_2KB) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 6:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_2KB) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 7:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P4_16x16) |
+ TILE_SPLIT(ADDR_SURF_TILE_SPLIT_2KB) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DEPTH_MICRO_TILING));
+ break;
+ case 8:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_LINEAR_ALIGNED) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16));
+ break;
+ case 9:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 10:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 11:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_8));
+ break;
+ case 12:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P4_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_DISPLAY_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_8));
+ break;
+ case 13:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 14:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 15:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_3D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 16:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_8));
+ break;
+ case 17:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P4_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_8));
+ break;
+ case 18:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 19:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 20:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 21:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_3D_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 22:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 23:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P4_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 24:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THIN_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 25:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_XTHICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 26:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_3D_TILED_XTHICK) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_THICK_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_1));
+ break;
+ case 27:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_1D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 28:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_2D_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_2));
+ break;
+ case 29:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P16_32x32_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_8));
+ break;
+ case 30:
+ gb_tile_moden = (ARRAY_MODE(ARRAY_PRT_TILED_THIN1) |
+ PIPE_CONFIG(ADDR_SURF_P4_16x16) |
+ MICRO_TILE_MODE_NEW(ADDR_SURF_ROTATED_MICRO_TILING) |
+ SAMPLE_SPLIT(ADDR_SURF_SAMPLE_SPLIT_8));
+ break;
+ default:
+ gb_tile_moden = 0;
+ break;
+ }
+ adev->gfx.config.tile_mode_array[reg_offset] = gb_tile_moden;
+ WREG32(mmGB_TILE_MODE0 + reg_offset, gb_tile_moden);
+ }
+ for (reg_offset = 0; reg_offset < num_secondary_tile_mode_states; reg_offset++) {
+ switch (reg_offset) {
+ case 0:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 1:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 2:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 3:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 4:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 5:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 6:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 8:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_8) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 9:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_4) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 10:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 11:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 12:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_2) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 13:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_2) |
+ NUM_BANKS(ADDR_SURF_8_BANK));
+ break;
+ case 14:
+ gb_tile_moden = (BANK_WIDTH(ADDR_SURF_BANK_WIDTH_1) |
+ BANK_HEIGHT(ADDR_SURF_BANK_HEIGHT_1) |
+ MACRO_TILE_ASPECT(ADDR_SURF_MACRO_ASPECT_1) |
+ NUM_BANKS(ADDR_SURF_4_BANK));
+ break;
+ case 7:
+ /* unused idx */
+ continue;
+ default:
+ gb_tile_moden = 0;
+ break;
+ }
+ adev->gfx.config.macrotile_mode_array[reg_offset] = gb_tile_moden;
+ WREG32(mmGB_MACROTILE_MODE0 + reg_offset, gb_tile_moden);
+ }
+ break;
case CHIP_TONGA:
for (reg_offset = 0; reg_offset < num_tile_mode_states; reg_offset++) {
switch (reg_offset) {
@@ -2971,10 +3256,13 @@
amdgpu_ring_write(ring, mmPA_SC_RASTER_CONFIG - PACKET3_SET_CONTEXT_REG_START);
switch (adev->asic_type) {
case CHIP_TONGA:
- case CHIP_FIJI:
amdgpu_ring_write(ring, 0x16000012);
amdgpu_ring_write(ring, 0x0000002A);
break;
+ case CHIP_FIJI:
+ amdgpu_ring_write(ring, 0x3a00161a);
+ amdgpu_ring_write(ring, 0x0000002e);
+ break;
case CHIP_TOPAZ:
case CHIP_CARRIZO:
amdgpu_ring_write(ring, 0x00000002);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
index 85bbcdc..7427d8c 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
@@ -40,7 +40,7 @@
static void gmc_v7_0_set_gart_funcs(struct amdgpu_device *adev);
static void gmc_v7_0_set_irq_funcs(struct amdgpu_device *adev);
-MODULE_FIRMWARE("radeon/boniare_mc.bin");
+MODULE_FIRMWARE("radeon/bonaire_mc.bin");
MODULE_FIRMWARE("radeon/hawaii_mc.bin");
/**
@@ -501,6 +501,7 @@
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE, 1);
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, EFFECTIVE_L2_QUEUE_SIZE, 7);
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, CONTEXT1_IDENTITY_ACCESS_MODE, 1);
+ tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, ENABLE_DEFAULT_PAGE_OUT_TO_SYSTEM_MEMORY, 1);
WREG32(mmVM_L2_CNTL, tmp);
tmp = REG_SET_FIELD(0, VM_L2_CNTL2, INVALIDATE_ALL_L1_TLBS, 1);
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL2, INVALIDATE_L2_CACHE, 1);
@@ -960,12 +961,10 @@
static int gmc_v7_0_sw_fini(void *handle)
{
- int i;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
if (adev->vm_manager.enabled) {
- for (i = 0; i < AMDGPU_NUM_VM; ++i)
- fence_put(adev->vm_manager.active[i]);
+ amdgpu_vm_manager_fini(adev);
gmc_v7_0_vm_fini(adev);
adev->vm_manager.enabled = false;
}
@@ -1010,12 +1009,10 @@
static int gmc_v7_0_suspend(void *handle)
{
- int i;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
if (adev->vm_manager.enabled) {
- for (i = 0; i < AMDGPU_NUM_VM; ++i)
- fence_put(adev->vm_manager.active[i]);
+ amdgpu_vm_manager_fini(adev);
gmc_v7_0_vm_fini(adev);
adev->vm_manager.enabled = false;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
index 1bcc4e7..cb0e50e 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
@@ -629,6 +629,7 @@
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, ENABLE_L2_PDE0_CACHE_LRU_UPDATE_BY_WRITE, 1);
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, EFFECTIVE_L2_QUEUE_SIZE, 7);
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, CONTEXT1_IDENTITY_ACCESS_MODE, 1);
+ tmp = REG_SET_FIELD(tmp, VM_L2_CNTL, ENABLE_DEFAULT_PAGE_OUT_TO_SYSTEM_MEMORY, 1);
WREG32(mmVM_L2_CNTL, tmp);
tmp = RREG32(mmVM_L2_CNTL2);
tmp = REG_SET_FIELD(tmp, VM_L2_CNTL2, INVALIDATE_ALL_L1_TLBS, 1);
@@ -979,12 +980,10 @@
static int gmc_v8_0_sw_fini(void *handle)
{
- int i;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
if (adev->vm_manager.enabled) {
- for (i = 0; i < AMDGPU_NUM_VM; ++i)
- fence_put(adev->vm_manager.active[i]);
+ amdgpu_vm_manager_fini(adev);
gmc_v8_0_vm_fini(adev);
adev->vm_manager.enabled = false;
}
@@ -1031,12 +1030,10 @@
static int gmc_v8_0_suspend(void *handle)
{
- int i;
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
if (adev->vm_manager.enabled) {
- for (i = 0; i < AMDGPU_NUM_VM; ++i)
- fence_put(adev->vm_manager.active[i]);
+ amdgpu_vm_manager_fini(adev);
gmc_v8_0_vm_fini(adev);
adev->vm_manager.enabled = false;
}
diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
index 6a52db6..370c6c9 100644
--- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c
@@ -40,6 +40,9 @@
#define GRBM_GFX_INDEX__VCE_INSTANCE__SHIFT 0x04
#define GRBM_GFX_INDEX__VCE_INSTANCE_MASK 0x10
+#define mmVCE_LMI_VCPU_CACHE_40BIT_BAR0 0x8616
+#define mmVCE_LMI_VCPU_CACHE_40BIT_BAR1 0x8617
+#define mmVCE_LMI_VCPU_CACHE_40BIT_BAR2 0x8618
#define VCE_V3_0_FW_SIZE (384 * 1024)
#define VCE_V3_0_STACK_SIZE (64 * 1024)
@@ -130,9 +133,11 @@
/* set BUSY flag */
WREG32_P(mmVCE_STATUS, 1, ~1);
-
- WREG32_P(mmVCE_VCPU_CNTL, VCE_VCPU_CNTL__CLK_EN_MASK,
- ~VCE_VCPU_CNTL__CLK_EN_MASK);
+ if (adev->asic_type >= CHIP_STONEY)
+ WREG32_P(mmVCE_VCPU_CNTL, 1, ~0x200001);
+ else
+ WREG32_P(mmVCE_VCPU_CNTL, VCE_VCPU_CNTL__CLK_EN_MASK,
+ ~VCE_VCPU_CNTL__CLK_EN_MASK);
WREG32_P(mmVCE_SOFT_RESET,
VCE_SOFT_RESET__ECPU_SOFT_RESET_MASK,
@@ -391,8 +396,12 @@
WREG32(mmVCE_LMI_SWAP_CNTL, 0);
WREG32(mmVCE_LMI_SWAP_CNTL1, 0);
WREG32(mmVCE_LMI_VM_CTRL, 0);
-
- WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR, (adev->vce.gpu_addr >> 8));
+ if (adev->asic_type >= CHIP_STONEY) {
+ WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR0, (adev->vce.gpu_addr >> 8));
+ WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR1, (adev->vce.gpu_addr >> 8));
+ WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR2, (adev->vce.gpu_addr >> 8));
+ } else
+ WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR, (adev->vce.gpu_addr >> 8));
offset = AMDGPU_VCE_FIRMWARE_OFFSET;
size = VCE_V3_0_FW_SIZE;
WREG32(mmVCE_VCPU_CACHE_OFFSET0, offset & 0x7fffffff);
@@ -576,6 +585,11 @@
struct amdgpu_iv_entry *entry)
{
DRM_DEBUG("IH: VCE\n");
+
+ WREG32_P(mmVCE_SYS_INT_STATUS,
+ VCE_SYS_INT_STATUS__VCE_SYS_INT_TRAP_INTERRUPT_INT_MASK,
+ ~VCE_SYS_INT_STATUS__VCE_SYS_INT_TRAP_INTERRUPT_INT_MASK);
+
switch (entry->src_data) {
case 0:
amdgpu_fence_process(&adev->vce.ring[0]);
diff --git a/drivers/gpu/drm/amd/scheduler/gpu_sched_trace.h b/drivers/gpu/drm/amd/scheduler/gpu_sched_trace.h
index 144f50a..c89dc77 100644
--- a/drivers/gpu/drm/amd/scheduler/gpu_sched_trace.h
+++ b/drivers/gpu/drm/amd/scheduler/gpu_sched_trace.h
@@ -16,6 +16,8 @@
TP_ARGS(sched_job),
TP_STRUCT__entry(
__field(struct amd_sched_entity *, entity)
+ __field(struct amd_sched_job *, sched_job)
+ __field(struct fence *, fence)
__field(const char *, name)
__field(u32, job_count)
__field(int, hw_job_count)
@@ -23,16 +25,32 @@
TP_fast_assign(
__entry->entity = sched_job->s_entity;
+ __entry->sched_job = sched_job;
+ __entry->fence = &sched_job->s_fence->base;
__entry->name = sched_job->sched->name;
__entry->job_count = kfifo_len(
&sched_job->s_entity->job_queue) / sizeof(sched_job);
__entry->hw_job_count = atomic_read(
&sched_job->sched->hw_rq_count);
),
- TP_printk("entity=%p, ring=%s, job count:%u, hw job count:%d",
- __entry->entity, __entry->name, __entry->job_count,
- __entry->hw_job_count)
+ TP_printk("entity=%p, sched job=%p, fence=%p, ring=%s, job count:%u, hw job count:%d",
+ __entry->entity, __entry->sched_job, __entry->fence, __entry->name,
+ __entry->job_count, __entry->hw_job_count)
);
+
+TRACE_EVENT(amd_sched_process_job,
+ TP_PROTO(struct amd_sched_fence *fence),
+ TP_ARGS(fence),
+ TP_STRUCT__entry(
+ __field(struct fence *, fence)
+ ),
+
+ TP_fast_assign(
+ __entry->fence = &fence->base;
+ ),
+ TP_printk("fence=%p signaled", __entry->fence)
+);
+
#endif
/* This part must be outside protection */
diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c
index 89619a5..651129f 100644
--- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c
+++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c
@@ -30,10 +30,12 @@
#define CREATE_TRACE_POINTS
#include "gpu_sched_trace.h"
-static struct amd_sched_job *
-amd_sched_entity_pop_job(struct amd_sched_entity *entity);
+static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity);
static void amd_sched_wakeup(struct amd_gpu_scheduler *sched);
+struct kmem_cache *sched_fence_slab;
+atomic_t sched_fence_slab_ref = ATOMIC_INIT(0);
+
/* Initialize a given run queue struct */
static void amd_sched_rq_init(struct amd_sched_rq *rq)
{
@@ -61,36 +63,36 @@
}
/**
- * Select next job from a specified run queue with round robin policy.
- * Return NULL if nothing available.
+ * Select an entity which could provide a job to run
+ *
+ * @rq The run queue to check.
+ *
+ * Try to find a ready entity, returns NULL if none found.
*/
-static struct amd_sched_job *
-amd_sched_rq_select_job(struct amd_sched_rq *rq)
+static struct amd_sched_entity *
+amd_sched_rq_select_entity(struct amd_sched_rq *rq)
{
struct amd_sched_entity *entity;
- struct amd_sched_job *sched_job;
spin_lock(&rq->lock);
entity = rq->current_entity;
if (entity) {
list_for_each_entry_continue(entity, &rq->entities, list) {
- sched_job = amd_sched_entity_pop_job(entity);
- if (sched_job) {
+ if (amd_sched_entity_is_ready(entity)) {
rq->current_entity = entity;
spin_unlock(&rq->lock);
- return sched_job;
+ return entity;
}
}
}
list_for_each_entry(entity, &rq->entities, list) {
- sched_job = amd_sched_entity_pop_job(entity);
- if (sched_job) {
+ if (amd_sched_entity_is_ready(entity)) {
rq->current_entity = entity;
spin_unlock(&rq->lock);
- return sched_job;
+ return entity;
}
if (entity == rq->current_entity)
@@ -174,6 +176,24 @@
}
/**
+ * Check if entity is ready
+ *
+ * @entity The pointer to a valid scheduler entity
+ *
+ * Return true if entity could provide a job.
+ */
+static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity)
+{
+ if (kfifo_is_empty(&entity->job_queue))
+ return false;
+
+ if (ACCESS_ONCE(entity->dependency))
+ return false;
+
+ return true;
+}
+
+/**
* Destroy a context entity
*
* @sched Pointer to scheduler instance
@@ -208,32 +228,53 @@
amd_sched_wakeup(entity->sched);
}
+static bool amd_sched_entity_add_dependency_cb(struct amd_sched_entity *entity)
+{
+ struct amd_gpu_scheduler *sched = entity->sched;
+ struct fence * fence = entity->dependency;
+ struct amd_sched_fence *s_fence;
+
+ if (fence->context == entity->fence_context) {
+ /* We can ignore fences from ourself */
+ fence_put(entity->dependency);
+ return false;
+ }
+
+ s_fence = to_amd_sched_fence(fence);
+ if (s_fence && s_fence->sched == sched) {
+ /* Fence is from the same scheduler */
+ if (test_bit(AMD_SCHED_FENCE_SCHEDULED_BIT, &fence->flags)) {
+ /* Ignore it when it is already scheduled */
+ fence_put(entity->dependency);
+ return false;
+ }
+
+ /* Wait for fence to be scheduled */
+ entity->cb.func = amd_sched_entity_wakeup;
+ list_add_tail(&entity->cb.node, &s_fence->scheduled_cb);
+ return true;
+ }
+
+ if (!fence_add_callback(entity->dependency, &entity->cb,
+ amd_sched_entity_wakeup))
+ return true;
+
+ fence_put(entity->dependency);
+ return false;
+}
+
static struct amd_sched_job *
amd_sched_entity_pop_job(struct amd_sched_entity *entity)
{
struct amd_gpu_scheduler *sched = entity->sched;
struct amd_sched_job *sched_job;
- if (ACCESS_ONCE(entity->dependency))
- return NULL;
-
if (!kfifo_out_peek(&entity->job_queue, &sched_job, sizeof(sched_job)))
return NULL;
- while ((entity->dependency = sched->ops->dependency(sched_job))) {
-
- if (entity->dependency->context == entity->fence_context) {
- /* We can ignore fences from ourself */
- fence_put(entity->dependency);
- continue;
- }
-
- if (fence_add_callback(entity->dependency, &entity->cb,
- amd_sched_entity_wakeup))
- fence_put(entity->dependency);
- else
+ while ((entity->dependency = sched->ops->dependency(sched_job)))
+ if (amd_sched_entity_add_dependency_cb(entity))
return NULL;
- }
return sched_job;
}
@@ -273,22 +314,13 @@
*
* Returns 0 for success, negative error code otherwise.
*/
-int amd_sched_entity_push_job(struct amd_sched_job *sched_job)
+void amd_sched_entity_push_job(struct amd_sched_job *sched_job)
{
struct amd_sched_entity *entity = sched_job->s_entity;
- struct amd_sched_fence *fence = amd_sched_fence_create(
- entity, sched_job->owner);
-
- if (!fence)
- return -ENOMEM;
-
- fence_get(&fence->base);
- sched_job->s_fence = fence;
wait_event(entity->sched->job_scheduled,
amd_sched_entity_in(sched_job));
trace_amd_sched_job(sched_job);
- return 0;
}
/**
@@ -310,22 +342,22 @@
}
/**
- * Select next to run
+ * Select next entity to process
*/
-static struct amd_sched_job *
-amd_sched_select_job(struct amd_gpu_scheduler *sched)
+static struct amd_sched_entity *
+amd_sched_select_entity(struct amd_gpu_scheduler *sched)
{
- struct amd_sched_job *sched_job;
+ struct amd_sched_entity *entity;
if (!amd_sched_ready(sched))
return NULL;
/* Kernel run queue has higher priority than normal run queue*/
- sched_job = amd_sched_rq_select_job(&sched->kernel_rq);
- if (sched_job == NULL)
- sched_job = amd_sched_rq_select_job(&sched->sched_rq);
+ entity = amd_sched_rq_select_entity(&sched->kernel_rq);
+ if (entity == NULL)
+ entity = amd_sched_rq_select_entity(&sched->sched_rq);
- return sched_job;
+ return entity;
}
static void amd_sched_process_job(struct fence *f, struct fence_cb *cb)
@@ -343,6 +375,7 @@
list_del_init(&s_fence->list);
spin_unlock_irqrestore(&sched->fence_list_lock, flags);
}
+ trace_amd_sched_process_job(s_fence);
fence_put(&s_fence->base);
wake_up_interruptible(&sched->wake_up_worker);
}
@@ -386,13 +419,16 @@
unsigned long flags;
wait_event_interruptible(sched->wake_up_worker,
- kthread_should_stop() ||
- (sched_job = amd_sched_select_job(sched)));
+ (entity = amd_sched_select_entity(sched)) ||
+ kthread_should_stop());
+ if (!entity)
+ continue;
+
+ sched_job = amd_sched_entity_pop_job(entity);
if (!sched_job)
continue;
- entity = sched_job->s_entity;
s_fence = sched_job->s_fence;
if (sched->timeout != MAX_SCHEDULE_TIMEOUT) {
@@ -405,6 +441,7 @@
atomic_inc(&sched->hw_rq_count);
fence = sched->ops->run_job(sched_job);
+ amd_sched_fence_scheduled(s_fence);
if (fence) {
r = fence_add_callback(fence, &s_fence->cb,
amd_sched_process_job);
@@ -450,6 +487,13 @@
init_waitqueue_head(&sched->wake_up_worker);
init_waitqueue_head(&sched->job_scheduled);
atomic_set(&sched->hw_rq_count, 0);
+ if (atomic_inc_return(&sched_fence_slab_ref) == 1) {
+ sched_fence_slab = kmem_cache_create(
+ "amd_sched_fence", sizeof(struct amd_sched_fence), 0,
+ SLAB_HWCACHE_ALIGN, NULL);
+ if (!sched_fence_slab)
+ return -ENOMEM;
+ }
/* Each scheduler will run on a seperate kernel thread */
sched->thread = kthread_run(amd_sched_main, sched, sched->name);
@@ -470,4 +514,6 @@
{
if (sched->thread)
kthread_stop(sched->thread);
+ if (atomic_dec_and_test(&sched_fence_slab_ref))
+ kmem_cache_destroy(sched_fence_slab);
}
diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h
index 929e9ac..a0f0ae5 100644
--- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h
+++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h
@@ -27,9 +27,14 @@
#include <linux/kfifo.h>
#include <linux/fence.h>
+#define AMD_SCHED_FENCE_SCHEDULED_BIT FENCE_FLAG_USER_BITS
+
struct amd_gpu_scheduler;
struct amd_sched_rq;
+extern struct kmem_cache *sched_fence_slab;
+extern atomic_t sched_fence_slab_ref;
+
/**
* A scheduler entity is a wrapper around a job queue or a group
* of other entities. Entities take turns emitting jobs from their
@@ -65,6 +70,7 @@
struct amd_sched_fence {
struct fence base;
struct fence_cb cb;
+ struct list_head scheduled_cb;
struct amd_gpu_scheduler *sched;
spinlock_t lock;
void *owner;
@@ -76,7 +82,6 @@
struct amd_gpu_scheduler *sched;
struct amd_sched_entity *s_entity;
struct amd_sched_fence *s_fence;
- void *owner;
};
extern const struct fence_ops amd_sched_fence_ops;
@@ -128,11 +133,11 @@
uint32_t jobs);
void amd_sched_entity_fini(struct amd_gpu_scheduler *sched,
struct amd_sched_entity *entity);
-int amd_sched_entity_push_job(struct amd_sched_job *sched_job);
+void amd_sched_entity_push_job(struct amd_sched_job *sched_job);
struct amd_sched_fence *amd_sched_fence_create(
struct amd_sched_entity *s_entity, void *owner);
+void amd_sched_fence_scheduled(struct amd_sched_fence *fence);
void amd_sched_fence_signal(struct amd_sched_fence *fence);
-
#endif
diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c
index d802638..87c78ee 100644
--- a/drivers/gpu/drm/amd/scheduler/sched_fence.c
+++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c
@@ -32,9 +32,11 @@
struct amd_sched_fence *fence = NULL;
unsigned seq;
- fence = kzalloc(sizeof(struct amd_sched_fence), GFP_KERNEL);
+ fence = kmem_cache_zalloc(sched_fence_slab, GFP_KERNEL);
if (fence == NULL)
return NULL;
+
+ INIT_LIST_HEAD(&fence->scheduled_cb);
fence->owner = owner;
fence->sched = s_entity->sched;
spin_lock_init(&fence->lock);
@@ -55,6 +57,17 @@
FENCE_TRACE(&fence->base, "was already signaled\n");
}
+void amd_sched_fence_scheduled(struct amd_sched_fence *s_fence)
+{
+ struct fence_cb *cur, *tmp;
+
+ set_bit(AMD_SCHED_FENCE_SCHEDULED_BIT, &s_fence->base.flags);
+ list_for_each_entry_safe(cur, tmp, &s_fence->scheduled_cb, node) {
+ list_del_init(&cur->node);
+ cur->func(&s_fence->base, cur);
+ }
+}
+
static const char *amd_sched_fence_get_driver_name(struct fence *fence)
{
return "amd_sched";
@@ -71,11 +84,17 @@
return true;
}
+static void amd_sched_fence_release(struct fence *f)
+{
+ struct amd_sched_fence *fence = to_amd_sched_fence(f);
+ kmem_cache_free(sched_fence_slab, fence);
+}
+
const struct fence_ops amd_sched_fence_ops = {
.get_driver_name = amd_sched_fence_get_driver_name,
.get_timeline_name = amd_sched_fence_get_timeline_name,
.enable_signaling = amd_sched_fence_enable_signaling,
.signaled = NULL,
.wait = fence_default_wait,
- .release = NULL,
+ .release = amd_sched_fence_release,
};
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 7bb3845..aeee083 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1432,6 +1432,45 @@
return ret;
}
+/**
+ * drm_atomic_update_old_fb -- Unset old_fb pointers and set plane->fb pointers.
+ *
+ * @dev: drm device to check.
+ * @plane_mask: plane mask for planes that were updated.
+ * @ret: return value, can be -EDEADLK for a retry.
+ *
+ * Before doing an update plane->old_fb is set to plane->fb,
+ * but before dropping the locks old_fb needs to be set to NULL
+ * and plane->fb updated. This is a common operation for each
+ * atomic update, so this call is split off as a helper.
+ */
+void drm_atomic_clean_old_fb(struct drm_device *dev,
+ unsigned plane_mask,
+ int ret)
+{
+ struct drm_plane *plane;
+
+ /* if succeeded, fixup legacy plane crtc/fb ptrs before dropping
+ * locks (ie. while it is still safe to deref plane->state). We
+ * need to do this here because the driver entry points cannot
+ * distinguish between legacy and atomic ioctls.
+ */
+ drm_for_each_plane_mask(plane, dev, plane_mask) {
+ if (ret == 0) {
+ struct drm_framebuffer *new_fb = plane->state->fb;
+ if (new_fb)
+ drm_framebuffer_reference(new_fb);
+ plane->fb = new_fb;
+ plane->crtc = plane->state->crtc;
+
+ if (plane->old_fb)
+ drm_framebuffer_unreference(plane->old_fb);
+ }
+ plane->old_fb = NULL;
+ }
+}
+EXPORT_SYMBOL(drm_atomic_clean_old_fb);
+
int drm_mode_atomic_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
@@ -1446,7 +1485,7 @@
struct drm_plane *plane;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
- unsigned plane_mask = 0;
+ unsigned plane_mask;
int ret = 0;
unsigned int i, j;
@@ -1486,6 +1525,7 @@
state->allow_modeset = !!(arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET);
retry:
+ plane_mask = 0;
copied_objs = 0;
copied_props = 0;
@@ -1576,24 +1616,7 @@
}
out:
- /* if succeeded, fixup legacy plane crtc/fb ptrs before dropping
- * locks (ie. while it is still safe to deref plane->state). We
- * need to do this here because the driver entry points cannot
- * distinguish between legacy and atomic ioctls.
- */
- drm_for_each_plane_mask(plane, dev, plane_mask) {
- if (ret == 0) {
- struct drm_framebuffer *new_fb = plane->state->fb;
- if (new_fb)
- drm_framebuffer_reference(new_fb);
- plane->fb = new_fb;
- plane->crtc = plane->state->crtc;
-
- if (plane->old_fb)
- drm_framebuffer_unreference(plane->old_fb);
- }
- plane->old_fb = NULL;
- }
+ drm_atomic_clean_old_fb(dev, plane_mask, ret);
if (ret && arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
/*
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 0c6f621..e5aec45 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -210,6 +210,14 @@
return -EINVAL;
}
+ if (!drm_encoder_crtc_ok(new_encoder, connector_state->crtc)) {
+ DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] incompatible with [CRTC:%d]\n",
+ new_encoder->base.id,
+ new_encoder->name,
+ connector_state->crtc->base.id);
+ return -EINVAL;
+ }
+
if (new_encoder == connector_state->best_encoder) {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d]\n",
connector->base.id,
@@ -1553,6 +1561,9 @@
goto fail;
}
+ if (plane_state->crtc && (plane == plane->crtc->cursor))
+ plane_state->state->legacy_cursor_update = true;
+
ret = __drm_atomic_helper_disable_plane(plane, plane_state);
if (ret != 0)
goto fail;
@@ -1605,9 +1616,6 @@
plane_state->src_h = 0;
plane_state->src_w = 0;
- if (plane->crtc && (plane == plane->crtc->cursor))
- plane_state->state->legacy_cursor_update = true;
-
return 0;
}
@@ -1741,6 +1749,7 @@
struct drm_crtc_state *crtc_state;
struct drm_plane_state *primary_state;
struct drm_crtc *crtc = set->crtc;
+ int hdisplay, vdisplay;
int ret;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
@@ -1783,19 +1792,21 @@
if (ret != 0)
return ret;
+ drm_crtc_get_hv_timing(set->mode, &hdisplay, &vdisplay);
+
drm_atomic_set_fb_for_plane(primary_state, set->fb);
primary_state->crtc_x = 0;
primary_state->crtc_y = 0;
- primary_state->crtc_h = set->mode->vdisplay;
- primary_state->crtc_w = set->mode->hdisplay;
+ primary_state->crtc_h = vdisplay;
+ primary_state->crtc_w = hdisplay;
primary_state->src_x = set->x << 16;
primary_state->src_y = set->y << 16;
if (primary_state->rotation & (BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_270))) {
- primary_state->src_h = set->mode->hdisplay << 16;
- primary_state->src_w = set->mode->vdisplay << 16;
+ primary_state->src_h = hdisplay << 16;
+ primary_state->src_w = vdisplay << 16;
} else {
- primary_state->src_h = set->mode->vdisplay << 16;
- primary_state->src_w = set->mode->hdisplay << 16;
+ primary_state->src_h = vdisplay << 16;
+ primary_state->src_w = hdisplay << 16;
}
commit:
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index e673c13..69cbab5 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -342,6 +342,7 @@
struct drm_plane *plane;
struct drm_atomic_state *state;
int i, ret;
+ unsigned plane_mask;
state = drm_atomic_state_alloc(dev);
if (!state)
@@ -349,11 +350,10 @@
state->acquire_ctx = dev->mode_config.acquire_ctx;
retry:
+ plane_mask = 0;
drm_for_each_plane(plane, dev) {
struct drm_plane_state *plane_state;
- plane->old_fb = plane->fb;
-
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state)) {
ret = PTR_ERR(plane_state);
@@ -362,6 +362,9 @@
plane_state->rotation = BIT(DRM_ROTATE_0);
+ plane->old_fb = plane->fb;
+ plane_mask |= 1 << drm_plane_index(plane);
+
/* disable non-primary: */
if (plane->type == DRM_PLANE_TYPE_PRIMARY)
continue;
@@ -382,19 +385,7 @@
ret = drm_atomic_commit(state);
fail:
- drm_for_each_plane(plane, dev) {
- if (ret == 0) {
- struct drm_framebuffer *new_fb = plane->state->fb;
- if (new_fb)
- drm_framebuffer_reference(new_fb);
- plane->fb = new_fb;
- plane->crtc = plane->state->crtc;
-
- if (plane->old_fb)
- drm_framebuffer_unreference(plane->old_fb);
- }
- plane->old_fb = NULL;
- }
+ drm_atomic_clean_old_fb(dev, plane_mask, ret);
if (ret == -EDEADLK)
goto backoff;
@@ -1236,7 +1227,9 @@
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
struct drm_atomic_state *state;
+ struct drm_plane *plane;
int i, ret;
+ unsigned plane_mask;
state = drm_atomic_state_alloc(dev);
if (!state)
@@ -1244,19 +1237,22 @@
state->acquire_ctx = dev->mode_config.acquire_ctx;
retry:
+ plane_mask = 0;
for(i = 0; i < fb_helper->crtc_count; i++) {
struct drm_mode_set *mode_set;
mode_set = &fb_helper->crtc_info[i].mode_set;
- mode_set->crtc->primary->old_fb = mode_set->crtc->primary->fb;
-
mode_set->x = var->xoffset;
mode_set->y = var->yoffset;
ret = __drm_atomic_helper_set_config(mode_set, state);
if (ret != 0)
goto fail;
+
+ plane = mode_set->crtc->primary;
+ plane_mask |= drm_plane_index(plane);
+ plane->old_fb = plane->fb;
}
ret = drm_atomic_commit(state);
@@ -1268,26 +1264,7 @@
fail:
- for(i = 0; i < fb_helper->crtc_count; i++) {
- struct drm_mode_set *mode_set;
- struct drm_plane *plane;
-
- mode_set = &fb_helper->crtc_info[i].mode_set;
- plane = mode_set->crtc->primary;
-
- if (ret == 0) {
- struct drm_framebuffer *new_fb = plane->state->fb;
-
- if (new_fb)
- drm_framebuffer_reference(new_fb);
- plane->fb = new_fb;
- plane->crtc = plane->state->crtc;
-
- if (plane->old_fb)
- drm_framebuffer_unreference(plane->old_fb);
- }
- plane->old_fb = NULL;
- }
+ drm_atomic_clean_old_fb(dev, plane_mask, ret);
if (ret == -EDEADLK)
goto backoff;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8afda45..95bb27d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -351,6 +351,8 @@
/* hsw/bdw */
DPLL_ID_WRPLL1 = 0,
DPLL_ID_WRPLL2 = 1,
+ DPLL_ID_SPLL = 2,
+
/* skl */
DPLL_ID_SKL_DPLL1 = 0,
DPLL_ID_SKL_DPLL2 = 1,
@@ -367,6 +369,7 @@
/* hsw, bdw */
uint32_t wrpll;
+ uint32_t spll;
/* skl */
/*
@@ -2648,6 +2651,7 @@
int enable_cmd_parser;
/* leave bools at the end to not create holes */
bool enable_hangcheck;
+ bool fastboot;
bool prefault_disable;
bool load_detect_test;
bool reset;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5cf4a19..91bb1fc 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3809,6 +3809,7 @@
int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_caching *args = data;
struct drm_i915_gem_object *obj;
enum i915_cache_level level;
@@ -3837,9 +3838,11 @@
return -EINVAL;
}
+ intel_runtime_pm_get(dev_priv);
+
ret = i915_mutex_lock_interruptible(dev);
if (ret)
- return ret;
+ goto rpm_put;
obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle));
if (&obj->base == NULL) {
@@ -3852,6 +3855,9 @@
drm_gem_object_unreference(&obj->base);
unlock:
mutex_unlock(&dev->struct_mutex);
+rpm_put:
+ intel_runtime_pm_put(dev_priv);
+
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index 96bb238..4be13a5 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -40,6 +40,7 @@
.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
.disable_power_well = -1,
.enable_ips = 1,
+ .fastboot = 0,
.prefault_disable = 0,
.load_detect_test = 0,
.reset = true,
@@ -133,6 +134,10 @@
module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
+module_param_named(fastboot, i915.fastboot, bool, 0600);
+MODULE_PARM_DESC(fastboot,
+ "Try to skip unnecessary mode sets at boot time (default: false)");
+
module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
MODULE_PARM_DESC(prefault_disable,
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index b84aaa0..6a2c76e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -138,18 +138,6 @@
pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
-static void hsw_crt_pre_enable(struct intel_encoder *encoder)
-{
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL already enabled\n");
- I915_WRITE(SPLL_CTL,
- SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC);
- POSTING_READ(SPLL_CTL);
- udelay(20);
-}
-
/* Note: The caller is required to filter out dpms modes not supported by the
* platform. */
static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
@@ -216,19 +204,6 @@
intel_disable_crt(encoder);
}
-static void hsw_crt_post_disable(struct intel_encoder *encoder)
-{
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t val;
-
- DRM_DEBUG_KMS("Disabling SPLL\n");
- val = I915_READ(SPLL_CTL);
- WARN_ON(!(val & SPLL_PLL_ENABLE));
- I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
- POSTING_READ(SPLL_CTL);
-}
-
static void intel_enable_crt(struct intel_encoder *encoder)
{
struct intel_crt *crt = intel_encoder_to_crt(encoder);
@@ -280,6 +255,10 @@
if (HAS_DDI(dev)) {
pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;
pipe_config->port_clock = 135000 * 2;
+
+ pipe_config->dpll_hw_state.wrpll = 0;
+ pipe_config->dpll_hw_state.spll =
+ SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
}
return true;
@@ -860,8 +839,6 @@
if (HAS_DDI(dev)) {
crt->base.get_config = hsw_crt_get_config;
crt->base.get_hw_state = intel_ddi_get_hw_state;
- crt->base.pre_enable = hsw_crt_pre_enable;
- crt->base.post_disable = hsw_crt_post_disable;
} else {
crt->base.get_config = intel_crt_get_config;
crt->base.get_hw_state = intel_crt_get_hw_state;
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index b25e99a..a6752a6 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1286,6 +1286,18 @@
}
crtc_state->ddi_pll_sel = PORT_CLK_SEL_WRPLL(pll->id);
+ } else if (crtc_state->ddi_pll_sel == PORT_CLK_SEL_SPLL) {
+ struct drm_atomic_state *state = crtc_state->base.state;
+ struct intel_shared_dpll_config *spll =
+ &intel_atomic_get_shared_dpll_state(state)[DPLL_ID_SPLL];
+
+ if (spll->crtc_mask &&
+ WARN_ON(spll->hw_state.spll != crtc_state->dpll_hw_state.spll))
+ return false;
+
+ crtc_state->shared_dpll = DPLL_ID_SPLL;
+ spll->hw_state.spll = crtc_state->dpll_hw_state.spll;
+ spll->crtc_mask |= 1 << intel_crtc->pipe;
}
return true;
@@ -2437,7 +2449,7 @@
}
}
-static void hsw_ddi_pll_enable(struct drm_i915_private *dev_priv,
+static void hsw_ddi_wrpll_enable(struct drm_i915_private *dev_priv,
struct intel_shared_dpll *pll)
{
I915_WRITE(WRPLL_CTL(pll->id), pll->config.hw_state.wrpll);
@@ -2445,9 +2457,17 @@
udelay(20);
}
-static void hsw_ddi_pll_disable(struct drm_i915_private *dev_priv,
+static void hsw_ddi_spll_enable(struct drm_i915_private *dev_priv,
struct intel_shared_dpll *pll)
{
+ I915_WRITE(SPLL_CTL, pll->config.hw_state.spll);
+ POSTING_READ(SPLL_CTL);
+ udelay(20);
+}
+
+static void hsw_ddi_wrpll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
uint32_t val;
val = I915_READ(WRPLL_CTL(pll->id));
@@ -2455,9 +2475,19 @@
POSTING_READ(WRPLL_CTL(pll->id));
}
-static bool hsw_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll,
- struct intel_dpll_hw_state *hw_state)
+static void hsw_ddi_spll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ uint32_t val;
+
+ val = I915_READ(SPLL_CTL);
+ I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
+ POSTING_READ(SPLL_CTL);
+}
+
+static bool hsw_ddi_wrpll_get_hw_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ struct intel_dpll_hw_state *hw_state)
{
uint32_t val;
@@ -2470,25 +2500,50 @@
return val & WRPLL_PLL_ENABLE;
}
+static bool hsw_ddi_spll_get_hw_state(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll,
+ struct intel_dpll_hw_state *hw_state)
+{
+ uint32_t val;
+
+ if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
+ return false;
+
+ val = I915_READ(SPLL_CTL);
+ hw_state->spll = val;
+
+ return val & SPLL_PLL_ENABLE;
+}
+
+
static const char * const hsw_ddi_pll_names[] = {
"WRPLL 1",
"WRPLL 2",
+ "SPLL"
};
static void hsw_shared_dplls_init(struct drm_i915_private *dev_priv)
{
int i;
- dev_priv->num_shared_dpll = 2;
+ dev_priv->num_shared_dpll = 3;
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ for (i = 0; i < 2; i++) {
dev_priv->shared_dplls[i].id = i;
dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i];
- dev_priv->shared_dplls[i].disable = hsw_ddi_pll_disable;
- dev_priv->shared_dplls[i].enable = hsw_ddi_pll_enable;
+ dev_priv->shared_dplls[i].disable = hsw_ddi_wrpll_disable;
+ dev_priv->shared_dplls[i].enable = hsw_ddi_wrpll_enable;
dev_priv->shared_dplls[i].get_hw_state =
- hsw_ddi_pll_get_hw_state;
+ hsw_ddi_wrpll_get_hw_state;
}
+
+ /* SPLL is special, but needs to be initialized anyway.. */
+ dev_priv->shared_dplls[i].id = i;
+ dev_priv->shared_dplls[i].name = hsw_ddi_pll_names[i];
+ dev_priv->shared_dplls[i].disable = hsw_ddi_spll_disable;
+ dev_priv->shared_dplls[i].enable = hsw_ddi_spll_enable;
+ dev_priv->shared_dplls[i].get_hw_state = hsw_ddi_spll_get_hw_state;
+
}
static const char * const skl_ddi_pll_names[] = {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f62ffc0..71860f8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2646,11 +2646,13 @@
return;
valid_fb:
- plane_state->src_x = plane_state->src_y = 0;
+ plane_state->src_x = 0;
+ plane_state->src_y = 0;
plane_state->src_w = fb->width << 16;
plane_state->src_h = fb->height << 16;
- plane_state->crtc_x = plane_state->src_y = 0;
+ plane_state->crtc_x = 0;
+ plane_state->crtc_y = 0;
plane_state->crtc_w = fb->width;
plane_state->crtc_h = fb->height;
@@ -4237,6 +4239,7 @@
struct intel_shared_dpll *pll;
struct intel_shared_dpll_config *shared_dpll;
enum intel_dpll_id i;
+ int max = dev_priv->num_shared_dpll;
shared_dpll = intel_atomic_get_shared_dpll_state(crtc_state->base.state);
@@ -4271,9 +4274,11 @@
WARN_ON(shared_dpll[i].crtc_mask);
goto found;
- }
+ } else if (INTEL_INFO(dev_priv)->gen < 9 && HAS_DDI(dev_priv))
+ /* Do not consider SPLL */
+ max = 2;
- for (i = 0; i < dev_priv->num_shared_dpll; i++) {
+ for (i = 0; i < max; i++) {
pll = &dev_priv->shared_dplls[i];
/* Only want to check enabled timings first */
@@ -9723,6 +9728,8 @@
case PORT_CLK_SEL_WRPLL2:
pipe_config->shared_dpll = DPLL_ID_WRPLL2;
break;
+ case PORT_CLK_SEL_SPLL:
+ pipe_config->shared_dpll = DPLL_ID_SPLL;
}
}
@@ -12003,9 +12010,10 @@
pipe_config->dpll_hw_state.cfgcr1,
pipe_config->dpll_hw_state.cfgcr2);
} else if (HAS_DDI(dev)) {
- DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: wrpll: 0x%x\n",
+ DRM_DEBUG_KMS("ddi_pll_sel: %u; dpll_hw_state: wrpll: 0x%x spll: 0x%x\n",
pipe_config->ddi_pll_sel,
- pipe_config->dpll_hw_state.wrpll);
+ pipe_config->dpll_hw_state.wrpll,
+ pipe_config->dpll_hw_state.spll);
} else {
DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, "
"fp0: 0x%x, fp1: 0x%x\n",
@@ -12528,6 +12536,7 @@
PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
+ PIPE_CONF_CHECK_X(dpll_hw_state.spll);
PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
@@ -13032,6 +13041,9 @@
struct intel_crtc_state *pipe_config =
to_intel_crtc_state(crtc_state);
+ memset(&to_intel_crtc(crtc)->atomic, 0,
+ sizeof(struct intel_crtc_atomic_commit));
+
/* Catch I915_MODE_FLAG_INHERITED */
if (crtc_state->mode.private_flags != crtc->state->mode.private_flags)
crtc_state->mode_changed = true;
@@ -13056,7 +13068,8 @@
if (ret)
return ret;
- if (intel_pipe_config_compare(state->dev,
+ if (i915.fastboot &&
+ intel_pipe_config_compare(state->dev,
to_intel_crtc_state(crtc->state),
pipe_config, true)) {
crtc_state->mode_changed = false;
@@ -14364,16 +14377,17 @@
static struct drm_framebuffer *
intel_user_framebuffer_create(struct drm_device *dev,
struct drm_file *filp,
- struct drm_mode_fb_cmd2 *mode_cmd)
+ struct drm_mode_fb_cmd2 *user_mode_cmd)
{
struct drm_i915_gem_object *obj;
+ struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
- mode_cmd->handles[0]));
+ mode_cmd.handles[0]));
if (&obj->base == NULL)
return ERR_PTR(-ENOENT);
- return intel_framebuffer_create(dev, mode_cmd, obj);
+ return intel_framebuffer_create(dev, &mode_cmd, obj);
}
#ifndef CONFIG_DRM_FBDEV_EMULATION
@@ -14705,6 +14719,9 @@
/* Apple Macbook 2,1 (Core 2 T7400) */
{ 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
+ /* Apple Macbook 4,1 */
+ { 0x2a02, 0x106b, 0x00a1, quirk_backlight_present },
+
/* Toshiba CB35 Chromebook (Celeron 2955U) */
{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index d52a15d..071a76b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4449,7 +4449,7 @@
POSTING_READ(GEN6_RPNSWREQ);
dev_priv->rps.cur_freq = val;
- trace_intel_gpu_freq_change(val * 50);
+ trace_intel_gpu_freq_change(intel_gpu_freq(dev_priv, val));
}
static void valleyview_set_rps(struct drm_device *dev, u8 val)
@@ -7255,7 +7255,8 @@
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val)
{
if (IS_GEN9(dev_priv->dev))
- return (val * GT_FREQUENCY_MULTIPLIER) / GEN9_FREQ_SCALER;
+ return DIV_ROUND_CLOSEST(val * GT_FREQUENCY_MULTIPLIER,
+ GEN9_FREQ_SCALER);
else if (IS_CHERRYVIEW(dev_priv->dev))
return chv_gpu_freq(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv->dev))
@@ -7267,13 +7268,14 @@
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val)
{
if (IS_GEN9(dev_priv->dev))
- return (val * GEN9_FREQ_SCALER) / GT_FREQUENCY_MULTIPLIER;
+ return DIV_ROUND_CLOSEST(val * GEN9_FREQ_SCALER,
+ GT_FREQUENCY_MULTIPLIER);
else if (IS_CHERRYVIEW(dev_priv->dev))
return chv_freq_opcode(dev_priv, val);
else if (IS_VALLEYVIEW(dev_priv->dev))
return byt_freq_opcode(dev_priv, val);
else
- return val / GT_FREQUENCY_MULTIPLIER;
+ return DIV_ROUND_CLOSEST(val, GT_FREQUENCY_MULTIPLIER);
}
struct request_boost {
diff --git a/drivers/gpu/drm/mgag200/mgag200_cursor.c b/drivers/gpu/drm/mgag200/mgag200_cursor.c
index 4f2068f..a7bf6a9 100644
--- a/drivers/gpu/drm/mgag200/mgag200_cursor.c
+++ b/drivers/gpu/drm/mgag200/mgag200_cursor.c
@@ -70,6 +70,11 @@
BUG_ON(pixels_2 != pixels_current && pixels_2 != pixels_prev);
BUG_ON(pixels_current == pixels_prev);
+ if (!handle || !file_priv) {
+ mga_hide_cursor(mdev);
+ return 0;
+ }
+
obj = drm_gem_object_lookup(dev, file_priv, handle);
if (!obj)
return -ENOENT;
@@ -88,12 +93,6 @@
goto out_unreserve1;
}
- if (!handle) {
- mga_hide_cursor(mdev);
- ret = 0;
- goto out1;
- }
-
/* Move cursor buffers into VRAM if they aren't already */
if (!pixels_1->pin_count) {
ret = mgag200_bo_pin(pixels_1, TTM_PL_FLAG_VRAM,
diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/instmem.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/instmem.h
index 28bc202..40f845e 100644
--- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/instmem.h
+++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/instmem.h
@@ -7,6 +7,7 @@
const struct nvkm_instmem_func *func;
struct nvkm_subdev subdev;
+ spinlock_t lock;
struct list_head list;
u32 reserved;
diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index 8b8332e..d5e6938 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -367,6 +367,7 @@
return -ENODEV;
}
obj = (union acpi_object *)buffer.pointer;
+ len = min(len, (int)obj->buffer.length);
memcpy(bios+offset, obj->buffer.pointer, len);
kfree(buffer.pointer);
return len;
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h
index 3050042e..a02813e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.h
@@ -39,6 +39,7 @@
#include <nvif/client.h>
#include <nvif/device.h>
+#include <nvif/ioctl.h>
#include <drmP.h>
@@ -65,9 +66,10 @@
};
enum nouveau_drm_object_route {
- NVDRM_OBJECT_NVIF = 0,
+ NVDRM_OBJECT_NVIF = NVIF_IOCTL_V0_OWNER_NVIF,
NVDRM_OBJECT_USIF,
NVDRM_OBJECT_ABI16,
+ NVDRM_OBJECT_ANY = NVIF_IOCTL_V0_OWNER_ANY,
};
enum nouveau_drm_notify_route {
diff --git a/drivers/gpu/drm/nouveau/nouveau_usif.c b/drivers/gpu/drm/nouveau/nouveau_usif.c
index 89dc4ce..6ae1b34 100644
--- a/drivers/gpu/drm/nouveau/nouveau_usif.c
+++ b/drivers/gpu/drm/nouveau/nouveau_usif.c
@@ -313,7 +313,10 @@
if (nvif_unpack(argv->v0, 0, 0, true)) {
/* block access to objects not created via this interface */
owner = argv->v0.owner;
- argv->v0.owner = NVDRM_OBJECT_USIF;
+ if (argv->v0.object == 0ULL)
+ argv->v0.owner = NVDRM_OBJECT_ANY; /* except client */
+ else
+ argv->v0.owner = NVDRM_OBJECT_USIF;
} else
goto done;
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c
index e3c783d..caf22b5 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/pci.c
@@ -279,6 +279,12 @@
};
static const struct nvkm_device_pci_vendor
+nvkm_device_pci_10de_0fe4[] = {
+ { 0x144d, 0xc740, NULL, { .War00C800_0 = true } },
+ {}
+};
+
+static const struct nvkm_device_pci_vendor
nvkm_device_pci_10de_104b[] = {
{ 0x1043, 0x844c, "GeForce GT 625" },
{ 0x1043, 0x846b, "GeForce GT 625" },
@@ -689,6 +695,12 @@
};
static const struct nvkm_device_pci_vendor
+nvkm_device_pci_10de_11e0[] = {
+ { 0x1558, 0x5106, NULL, { .War00C800_0 = true } },
+ {}
+};
+
+static const struct nvkm_device_pci_vendor
nvkm_device_pci_10de_11e3[] = {
{ 0x17aa, 0x3683, "GeForce GTX 760A" },
{}
@@ -1370,7 +1382,7 @@
{ 0x0fe1, "GeForce GT 730M" },
{ 0x0fe2, "GeForce GT 745M" },
{ 0x0fe3, "GeForce GT 745M", nvkm_device_pci_10de_0fe3 },
- { 0x0fe4, "GeForce GT 750M" },
+ { 0x0fe4, "GeForce GT 750M", nvkm_device_pci_10de_0fe4 },
{ 0x0fe9, "GeForce GT 750M" },
{ 0x0fea, "GeForce GT 755M" },
{ 0x0fec, "GeForce 710A" },
@@ -1485,7 +1497,7 @@
{ 0x11c6, "GeForce GTX 650 Ti" },
{ 0x11c8, "GeForce GTX 650" },
{ 0x11cb, "GeForce GT 740" },
- { 0x11e0, "GeForce GTX 770M" },
+ { 0x11e0, "GeForce GTX 770M", nvkm_device_pci_10de_11e0 },
{ 0x11e1, "GeForce GTX 765M" },
{ 0x11e2, "GeForce GTX 765M" },
{ 0x11e3, "GeForce GTX 760M", nvkm_device_pci_10de_11e3 },
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf117.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf117.c
index b5b8759..74de7a9 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf117.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf117.c
@@ -207,6 +207,8 @@
const u32 b = beta * gr->ppc_tpc_nr[gpc][ppc];
const u32 t = timeslice_mode;
const u32 o = PPC_UNIT(gpc, ppc, 0);
+ if (!(gr->ppc_mask[gpc] & (1 << ppc)))
+ continue;
mmio_skip(info, o + 0xc0, (t << 28) | (b << 16) | ++bo);
mmio_wr32(info, o + 0xc0, (t << 28) | (b << 16) | --bo);
bo += grctx->attrib_nr_max * gr->ppc_tpc_nr[gpc][ppc];
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc
index 194afe9..7dacb3c 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpc.fuc
@@ -52,10 +52,12 @@
#endif
#ifdef INCLUDE_CODE
+#define gpc_addr(reg,addr) /*
+*/ imm32(reg,addr) /*
+*/ or reg NV_PGRAPH_GPCX_GPCCS_MMIO_CTRL_BASE_ENABLE
#define gpc_wr32(addr,reg) /*
+*/ gpc_addr($r14,addr) /*
*/ mov b32 $r15 reg /*
-*/ imm32($r14, addr) /*
-*/ or $r14 NV_PGRAPH_GPCX_GPCCS_MMIO_CTRL_BASE_ENABLE /*
*/ call(nv_wr32)
// reports an exception to the host
@@ -161,7 +163,7 @@
#if NV_PGRAPH_GPCX_UNK__SIZE > 0
// figure out which, and how many, UNKs are actually present
- imm32($r14, 0x500c30)
+ gpc_addr($r14, 0x500c30)
clear b32 $r2
clear b32 $r3
clear b32 $r4
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgf117.fuc3.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgf117.fuc3.h
index 64d07df..bb820ff 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgf117.fuc3.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgf117.fuc3.h
@@ -314,7 +314,7 @@
0x03f01200,
0x0002d000,
0x17f104bd,
- 0x10fe0542,
+ 0x10fe0545,
0x0007f100,
0x0003f007,
0xbd0000d0,
@@ -338,184 +338,184 @@
0x02d00103,
0xf104bd00,
0xf00c30e7,
- 0x24bd50e3,
- 0x44bd34bd,
-/* 0x0430: init_unk_loop */
- 0xb06821f4,
- 0x0bf400f6,
- 0x01f7f00f,
- 0xfd04f2bb,
- 0x30b6054f,
-/* 0x0445: init_unk_next */
- 0x0120b601,
- 0xb004e0b6,
- 0x1bf40126,
-/* 0x0451: init_unk_done */
- 0x070380e2,
- 0xf1080480,
- 0xf0010027,
- 0x22cf0223,
- 0x9534bd00,
- 0x07f10825,
- 0x03f0c000,
- 0x0005d001,
- 0x07f104bd,
- 0x03f0c100,
- 0x0005d001,
- 0x0e9804bd,
- 0x010f9800,
- 0x015021f5,
- 0xbb002fbb,
- 0x0e98003f,
- 0x020f9801,
- 0x015021f5,
- 0xfd050e98,
- 0x2ebb00ef,
- 0x003ebb00,
- 0x98020e98,
- 0x21f5030f,
- 0x0e980150,
- 0x00effd07,
- 0xbb002ebb,
- 0x35b6003e,
- 0x0007f102,
- 0x0103f0d3,
- 0xbd0003d0,
- 0x0825b604,
- 0xb60635b6,
- 0x30b60120,
- 0x0824b601,
- 0xb90834b6,
- 0x21f5022f,
- 0x2fbb02d3,
- 0x003fbb00,
- 0x010007f1,
- 0xd00203f0,
+ 0xe5f050e3,
+ 0xbd24bd01,
+/* 0x0433: init_unk_loop */
+ 0xf444bd34,
+ 0xf6b06821,
+ 0x0f0bf400,
+ 0xbb01f7f0,
+ 0x4ffd04f2,
+ 0x0130b605,
+/* 0x0448: init_unk_next */
+ 0xb60120b6,
+ 0x26b004e0,
+ 0xe21bf401,
+/* 0x0454: init_unk_done */
+ 0x80070380,
+ 0x27f10804,
+ 0x23f00100,
+ 0x0022cf02,
+ 0x259534bd,
+ 0x0007f108,
+ 0x0103f0c0,
+ 0xbd0005d0,
+ 0x0007f104,
+ 0x0103f0c1,
+ 0xbd0005d0,
+ 0x000e9804,
+ 0xf5010f98,
+ 0xbb015021,
+ 0x3fbb002f,
+ 0x010e9800,
+ 0xf5020f98,
+ 0x98015021,
+ 0xeffd050e,
+ 0x002ebb00,
+ 0x98003ebb,
+ 0x0f98020e,
+ 0x5021f503,
+ 0x070e9801,
+ 0xbb00effd,
+ 0x3ebb002e,
+ 0x0235b600,
+ 0xd30007f1,
+ 0xd00103f0,
0x04bd0003,
- 0x29f024bd,
- 0x0007f11f,
- 0x0203f008,
- 0xbd0002d0,
-/* 0x0505: main */
- 0x0031f404,
- 0xf00028f4,
- 0x21f424d7,
- 0xf401f439,
- 0xf404e4b0,
- 0x81fe1e18,
- 0x0627f001,
- 0x12fd20bd,
- 0x01e4b604,
- 0xfe051efd,
- 0x21f50018,
- 0x0ef405fa,
-/* 0x0535: main_not_ctx_xfer */
- 0x10ef94d3,
- 0xf501f5f0,
- 0xf4037e21,
-/* 0x0542: ih */
- 0x80f9c60e,
- 0xf90188fe,
- 0xf990f980,
- 0xf9b0f9a0,
- 0xf9e0f9d0,
- 0xf104bdf0,
- 0xf00200a7,
- 0xaacf00a3,
- 0x04abc400,
- 0xf02c0bf4,
- 0xe7f124d7,
- 0xe3f01a00,
- 0x00eecf00,
- 0x1900f7f1,
- 0xcf00f3f0,
- 0x21f400ff,
- 0x01e7f004,
- 0x1d0007f1,
- 0xd00003f0,
- 0x04bd000e,
-/* 0x0590: ih_no_fifo */
- 0x010007f1,
- 0xd00003f0,
- 0x04bd000a,
- 0xe0fcf0fc,
- 0xb0fcd0fc,
- 0x90fca0fc,
- 0x88fe80fc,
- 0xf480fc00,
- 0x01f80032,
-/* 0x05b4: hub_barrier_done */
- 0x9801f7f0,
- 0xfebb040e,
- 0x02ffb904,
- 0x9418e7f1,
- 0xf440e3f0,
- 0x00f89d21,
-/* 0x05cc: ctx_redswitch */
- 0xf120f7f0,
+ 0xb60825b6,
+ 0x20b60635,
+ 0x0130b601,
+ 0xb60824b6,
+ 0x2fb90834,
+ 0xd321f502,
+ 0x002fbb02,
+ 0xf1003fbb,
+ 0xf0010007,
+ 0x03d00203,
+ 0xbd04bd00,
+ 0x1f29f024,
+ 0x080007f1,
+ 0xd00203f0,
+ 0x04bd0002,
+/* 0x0508: main */
+ 0xf40031f4,
+ 0xd7f00028,
+ 0x3921f424,
+ 0xb0f401f4,
+ 0x18f404e4,
+ 0x0181fe1e,
+ 0xbd0627f0,
+ 0x0412fd20,
+ 0xfd01e4b6,
+ 0x18fe051e,
+ 0xfd21f500,
+ 0xd30ef405,
+/* 0x0538: main_not_ctx_xfer */
+ 0xf010ef94,
+ 0x21f501f5,
+ 0x0ef4037e,
+/* 0x0545: ih */
+ 0xfe80f9c6,
+ 0x80f90188,
+ 0xa0f990f9,
+ 0xd0f9b0f9,
+ 0xf0f9e0f9,
+ 0xa7f104bd,
+ 0xa3f00200,
+ 0x00aacf00,
+ 0xf404abc4,
+ 0xd7f02c0b,
+ 0x00e7f124,
+ 0x00e3f01a,
+ 0xf100eecf,
+ 0xf01900f7,
+ 0xffcf00f3,
+ 0x0421f400,
+ 0xf101e7f0,
+ 0xf01d0007,
+ 0x0ed00003,
+/* 0x0593: ih_no_fifo */
+ 0xf104bd00,
+ 0xf0010007,
+ 0x0ad00003,
+ 0xfc04bd00,
+ 0xfce0fcf0,
+ 0xfcb0fcd0,
+ 0xfc90fca0,
+ 0x0088fe80,
+ 0x32f480fc,
+/* 0x05b7: hub_barrier_done */
+ 0xf001f800,
+ 0x0e9801f7,
+ 0x04febb04,
+ 0xf102ffb9,
+ 0xf09418e7,
+ 0x21f440e3,
+/* 0x05cf: ctx_redswitch */
+ 0xf000f89d,
+ 0x07f120f7,
+ 0x03f08500,
+ 0x000fd001,
+ 0xe7f004bd,
+/* 0x05e1: ctx_redswitch_delay */
+ 0x01e2b608,
+ 0xf1fd1bf4,
+ 0xf10800f5,
+ 0xf10200f5,
0xf0850007,
0x0fd00103,
- 0xf004bd00,
-/* 0x05de: ctx_redswitch_delay */
- 0xe2b608e7,
- 0xfd1bf401,
- 0x0800f5f1,
- 0x0200f5f1,
- 0x850007f1,
- 0xd00103f0,
- 0x04bd000f,
-/* 0x05fa: ctx_xfer */
- 0x07f100f8,
- 0x03f08100,
- 0x000fd002,
- 0x11f404bd,
- 0xcc21f507,
-/* 0x060d: ctx_xfer_not_load */
- 0x6a21f505,
- 0xf124bd02,
- 0xf047fc07,
- 0x02d00203,
- 0xf004bd00,
- 0x20b6012c,
- 0xfc07f103,
- 0x0203f04a,
- 0xbd0002d0,
- 0x01acf004,
- 0xf102a5f0,
- 0xf00000b7,
- 0x0c9850b3,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98000c,
- 0x00e7f001,
- 0x016f21f5,
- 0xf101acf0,
- 0xf04000b7,
- 0x0c9850b3,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98010c,
- 0x060f9802,
- 0x0800e7f1,
- 0x016f21f5,
+ 0xf804bd00,
+/* 0x05fd: ctx_xfer */
+ 0x0007f100,
+ 0x0203f081,
+ 0xbd000fd0,
+ 0x0711f404,
+ 0x05cf21f5,
+/* 0x0610: ctx_xfer_not_load */
+ 0x026a21f5,
+ 0x07f124bd,
+ 0x03f047fc,
+ 0x0002d002,
+ 0x2cf004bd,
+ 0x0320b601,
+ 0x4afc07f1,
+ 0xd00203f0,
+ 0x04bd0002,
0xf001acf0,
- 0xb7f104a5,
- 0xb3f03000,
+ 0xb7f102a5,
+ 0xb3f00000,
0x040c9850,
0xbb0fc4b6,
0x0c9800bc,
- 0x030d9802,
- 0xf1080f98,
- 0xf50200e7,
- 0xf5016f21,
- 0xf4025e21,
- 0x12f40601,
-/* 0x06a9: ctx_xfer_post */
- 0x7f21f507,
-/* 0x06ad: ctx_xfer_done */
- 0xb421f502,
- 0x0000f805,
- 0x00000000,
+ 0x010d9800,
+ 0xf500e7f0,
+ 0xf0016f21,
+ 0xb7f101ac,
+ 0xb3f04000,
+ 0x040c9850,
+ 0xbb0fc4b6,
+ 0x0c9800bc,
+ 0x020d9801,
+ 0xf1060f98,
+ 0xf50800e7,
+ 0xf0016f21,
+ 0xa5f001ac,
+ 0x00b7f104,
+ 0x50b3f030,
+ 0xb6040c98,
+ 0xbcbb0fc4,
+ 0x020c9800,
+ 0x98030d98,
+ 0xe7f1080f,
+ 0x21f50200,
+ 0x21f5016f,
+ 0x01f4025e,
+ 0x0712f406,
+/* 0x06ac: ctx_xfer_post */
+ 0x027f21f5,
+/* 0x06b0: ctx_xfer_done */
+ 0x05b721f5,
+ 0x000000f8,
0x00000000,
0x00000000,
0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk104.fuc3.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk104.fuc3.h
index 2f59643..911976d 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk104.fuc3.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk104.fuc3.h
@@ -314,7 +314,7 @@
0x03f01200,
0x0002d000,
0x17f104bd,
- 0x10fe0542,
+ 0x10fe0545,
0x0007f100,
0x0003f007,
0xbd0000d0,
@@ -338,184 +338,184 @@
0x02d00103,
0xf104bd00,
0xf00c30e7,
- 0x24bd50e3,
- 0x44bd34bd,
-/* 0x0430: init_unk_loop */
- 0xb06821f4,
- 0x0bf400f6,
- 0x01f7f00f,
- 0xfd04f2bb,
- 0x30b6054f,
-/* 0x0445: init_unk_next */
- 0x0120b601,
- 0xb004e0b6,
- 0x1bf40126,
-/* 0x0451: init_unk_done */
- 0x070380e2,
- 0xf1080480,
- 0xf0010027,
- 0x22cf0223,
- 0x9534bd00,
- 0x07f10825,
- 0x03f0c000,
- 0x0005d001,
- 0x07f104bd,
- 0x03f0c100,
- 0x0005d001,
- 0x0e9804bd,
- 0x010f9800,
- 0x015021f5,
- 0xbb002fbb,
- 0x0e98003f,
- 0x020f9801,
- 0x015021f5,
- 0xfd050e98,
- 0x2ebb00ef,
- 0x003ebb00,
- 0x98020e98,
- 0x21f5030f,
- 0x0e980150,
- 0x00effd07,
- 0xbb002ebb,
- 0x35b6003e,
- 0x0007f102,
- 0x0103f0d3,
- 0xbd0003d0,
- 0x0825b604,
- 0xb60635b6,
- 0x30b60120,
- 0x0824b601,
- 0xb90834b6,
- 0x21f5022f,
- 0x2fbb02d3,
- 0x003fbb00,
- 0x010007f1,
- 0xd00203f0,
+ 0xe5f050e3,
+ 0xbd24bd01,
+/* 0x0433: init_unk_loop */
+ 0xf444bd34,
+ 0xf6b06821,
+ 0x0f0bf400,
+ 0xbb01f7f0,
+ 0x4ffd04f2,
+ 0x0130b605,
+/* 0x0448: init_unk_next */
+ 0xb60120b6,
+ 0x26b004e0,
+ 0xe21bf401,
+/* 0x0454: init_unk_done */
+ 0x80070380,
+ 0x27f10804,
+ 0x23f00100,
+ 0x0022cf02,
+ 0x259534bd,
+ 0x0007f108,
+ 0x0103f0c0,
+ 0xbd0005d0,
+ 0x0007f104,
+ 0x0103f0c1,
+ 0xbd0005d0,
+ 0x000e9804,
+ 0xf5010f98,
+ 0xbb015021,
+ 0x3fbb002f,
+ 0x010e9800,
+ 0xf5020f98,
+ 0x98015021,
+ 0xeffd050e,
+ 0x002ebb00,
+ 0x98003ebb,
+ 0x0f98020e,
+ 0x5021f503,
+ 0x070e9801,
+ 0xbb00effd,
+ 0x3ebb002e,
+ 0x0235b600,
+ 0xd30007f1,
+ 0xd00103f0,
0x04bd0003,
- 0x29f024bd,
- 0x0007f11f,
- 0x0203f008,
- 0xbd0002d0,
-/* 0x0505: main */
- 0x0031f404,
- 0xf00028f4,
- 0x21f424d7,
- 0xf401f439,
- 0xf404e4b0,
- 0x81fe1e18,
- 0x0627f001,
- 0x12fd20bd,
- 0x01e4b604,
- 0xfe051efd,
- 0x21f50018,
- 0x0ef405fa,
-/* 0x0535: main_not_ctx_xfer */
- 0x10ef94d3,
- 0xf501f5f0,
- 0xf4037e21,
-/* 0x0542: ih */
- 0x80f9c60e,
- 0xf90188fe,
- 0xf990f980,
- 0xf9b0f9a0,
- 0xf9e0f9d0,
- 0xf104bdf0,
- 0xf00200a7,
- 0xaacf00a3,
- 0x04abc400,
- 0xf02c0bf4,
- 0xe7f124d7,
- 0xe3f01a00,
- 0x00eecf00,
- 0x1900f7f1,
- 0xcf00f3f0,
- 0x21f400ff,
- 0x01e7f004,
- 0x1d0007f1,
- 0xd00003f0,
- 0x04bd000e,
-/* 0x0590: ih_no_fifo */
- 0x010007f1,
- 0xd00003f0,
- 0x04bd000a,
- 0xe0fcf0fc,
- 0xb0fcd0fc,
- 0x90fca0fc,
- 0x88fe80fc,
- 0xf480fc00,
- 0x01f80032,
-/* 0x05b4: hub_barrier_done */
- 0x9801f7f0,
- 0xfebb040e,
- 0x02ffb904,
- 0x9418e7f1,
- 0xf440e3f0,
- 0x00f89d21,
-/* 0x05cc: ctx_redswitch */
- 0xf120f7f0,
+ 0xb60825b6,
+ 0x20b60635,
+ 0x0130b601,
+ 0xb60824b6,
+ 0x2fb90834,
+ 0xd321f502,
+ 0x002fbb02,
+ 0xf1003fbb,
+ 0xf0010007,
+ 0x03d00203,
+ 0xbd04bd00,
+ 0x1f29f024,
+ 0x080007f1,
+ 0xd00203f0,
+ 0x04bd0002,
+/* 0x0508: main */
+ 0xf40031f4,
+ 0xd7f00028,
+ 0x3921f424,
+ 0xb0f401f4,
+ 0x18f404e4,
+ 0x0181fe1e,
+ 0xbd0627f0,
+ 0x0412fd20,
+ 0xfd01e4b6,
+ 0x18fe051e,
+ 0xfd21f500,
+ 0xd30ef405,
+/* 0x0538: main_not_ctx_xfer */
+ 0xf010ef94,
+ 0x21f501f5,
+ 0x0ef4037e,
+/* 0x0545: ih */
+ 0xfe80f9c6,
+ 0x80f90188,
+ 0xa0f990f9,
+ 0xd0f9b0f9,
+ 0xf0f9e0f9,
+ 0xa7f104bd,
+ 0xa3f00200,
+ 0x00aacf00,
+ 0xf404abc4,
+ 0xd7f02c0b,
+ 0x00e7f124,
+ 0x00e3f01a,
+ 0xf100eecf,
+ 0xf01900f7,
+ 0xffcf00f3,
+ 0x0421f400,
+ 0xf101e7f0,
+ 0xf01d0007,
+ 0x0ed00003,
+/* 0x0593: ih_no_fifo */
+ 0xf104bd00,
+ 0xf0010007,
+ 0x0ad00003,
+ 0xfc04bd00,
+ 0xfce0fcf0,
+ 0xfcb0fcd0,
+ 0xfc90fca0,
+ 0x0088fe80,
+ 0x32f480fc,
+/* 0x05b7: hub_barrier_done */
+ 0xf001f800,
+ 0x0e9801f7,
+ 0x04febb04,
+ 0xf102ffb9,
+ 0xf09418e7,
+ 0x21f440e3,
+/* 0x05cf: ctx_redswitch */
+ 0xf000f89d,
+ 0x07f120f7,
+ 0x03f08500,
+ 0x000fd001,
+ 0xe7f004bd,
+/* 0x05e1: ctx_redswitch_delay */
+ 0x01e2b608,
+ 0xf1fd1bf4,
+ 0xf10800f5,
+ 0xf10200f5,
0xf0850007,
0x0fd00103,
- 0xf004bd00,
-/* 0x05de: ctx_redswitch_delay */
- 0xe2b608e7,
- 0xfd1bf401,
- 0x0800f5f1,
- 0x0200f5f1,
- 0x850007f1,
- 0xd00103f0,
- 0x04bd000f,
-/* 0x05fa: ctx_xfer */
- 0x07f100f8,
- 0x03f08100,
- 0x000fd002,
- 0x11f404bd,
- 0xcc21f507,
-/* 0x060d: ctx_xfer_not_load */
- 0x6a21f505,
- 0xf124bd02,
- 0xf047fc07,
- 0x02d00203,
- 0xf004bd00,
- 0x20b6012c,
- 0xfc07f103,
- 0x0203f04a,
- 0xbd0002d0,
- 0x01acf004,
- 0xf102a5f0,
- 0xf00000b7,
- 0x0c9850b3,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98000c,
- 0x00e7f001,
- 0x016f21f5,
- 0xf101acf0,
- 0xf04000b7,
- 0x0c9850b3,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98010c,
- 0x060f9802,
- 0x0800e7f1,
- 0x016f21f5,
+ 0xf804bd00,
+/* 0x05fd: ctx_xfer */
+ 0x0007f100,
+ 0x0203f081,
+ 0xbd000fd0,
+ 0x0711f404,
+ 0x05cf21f5,
+/* 0x0610: ctx_xfer_not_load */
+ 0x026a21f5,
+ 0x07f124bd,
+ 0x03f047fc,
+ 0x0002d002,
+ 0x2cf004bd,
+ 0x0320b601,
+ 0x4afc07f1,
+ 0xd00203f0,
+ 0x04bd0002,
0xf001acf0,
- 0xb7f104a5,
- 0xb3f03000,
+ 0xb7f102a5,
+ 0xb3f00000,
0x040c9850,
0xbb0fc4b6,
0x0c9800bc,
- 0x030d9802,
- 0xf1080f98,
- 0xf50200e7,
- 0xf5016f21,
- 0xf4025e21,
- 0x12f40601,
-/* 0x06a9: ctx_xfer_post */
- 0x7f21f507,
-/* 0x06ad: ctx_xfer_done */
- 0xb421f502,
- 0x0000f805,
- 0x00000000,
+ 0x010d9800,
+ 0xf500e7f0,
+ 0xf0016f21,
+ 0xb7f101ac,
+ 0xb3f04000,
+ 0x040c9850,
+ 0xbb0fc4b6,
+ 0x0c9800bc,
+ 0x020d9801,
+ 0xf1060f98,
+ 0xf50800e7,
+ 0xf0016f21,
+ 0xa5f001ac,
+ 0x00b7f104,
+ 0x50b3f030,
+ 0xb6040c98,
+ 0xbcbb0fc4,
+ 0x020c9800,
+ 0x98030d98,
+ 0xe7f1080f,
+ 0x21f50200,
+ 0x21f5016f,
+ 0x01f4025e,
+ 0x0712f406,
+/* 0x06ac: ctx_xfer_post */
+ 0x027f21f5,
+/* 0x06b0: ctx_xfer_done */
+ 0x05b721f5,
+ 0x000000f8,
0x00000000,
0x00000000,
0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk110.fuc3.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk110.fuc3.h
index ee8e54d..1c6e11b 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk110.fuc3.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk110.fuc3.h
@@ -314,7 +314,7 @@
0x03f01200,
0x0002d000,
0x17f104bd,
- 0x10fe0542,
+ 0x10fe0545,
0x0007f100,
0x0003f007,
0xbd0000d0,
@@ -338,184 +338,184 @@
0x02d00103,
0xf104bd00,
0xf00c30e7,
- 0x24bd50e3,
- 0x44bd34bd,
-/* 0x0430: init_unk_loop */
- 0xb06821f4,
- 0x0bf400f6,
- 0x01f7f00f,
- 0xfd04f2bb,
- 0x30b6054f,
-/* 0x0445: init_unk_next */
- 0x0120b601,
- 0xb004e0b6,
- 0x1bf40226,
-/* 0x0451: init_unk_done */
- 0x070380e2,
- 0xf1080480,
- 0xf0010027,
- 0x22cf0223,
- 0x9534bd00,
- 0x07f10825,
- 0x03f0c000,
- 0x0005d001,
- 0x07f104bd,
- 0x03f0c100,
- 0x0005d001,
- 0x0e9804bd,
- 0x010f9800,
- 0x015021f5,
- 0xbb002fbb,
- 0x0e98003f,
- 0x020f9801,
- 0x015021f5,
- 0xfd050e98,
- 0x2ebb00ef,
- 0x003ebb00,
- 0x98020e98,
- 0x21f5030f,
- 0x0e980150,
- 0x00effd07,
- 0xbb002ebb,
- 0x35b6003e,
- 0x0007f102,
- 0x0103f0d3,
- 0xbd0003d0,
- 0x0825b604,
- 0xb60635b6,
- 0x30b60120,
- 0x0824b601,
- 0xb90834b6,
- 0x21f5022f,
- 0x2fbb02d3,
- 0x003fbb00,
- 0x010007f1,
- 0xd00203f0,
+ 0xe5f050e3,
+ 0xbd24bd01,
+/* 0x0433: init_unk_loop */
+ 0xf444bd34,
+ 0xf6b06821,
+ 0x0f0bf400,
+ 0xbb01f7f0,
+ 0x4ffd04f2,
+ 0x0130b605,
+/* 0x0448: init_unk_next */
+ 0xb60120b6,
+ 0x26b004e0,
+ 0xe21bf402,
+/* 0x0454: init_unk_done */
+ 0x80070380,
+ 0x27f10804,
+ 0x23f00100,
+ 0x0022cf02,
+ 0x259534bd,
+ 0x0007f108,
+ 0x0103f0c0,
+ 0xbd0005d0,
+ 0x0007f104,
+ 0x0103f0c1,
+ 0xbd0005d0,
+ 0x000e9804,
+ 0xf5010f98,
+ 0xbb015021,
+ 0x3fbb002f,
+ 0x010e9800,
+ 0xf5020f98,
+ 0x98015021,
+ 0xeffd050e,
+ 0x002ebb00,
+ 0x98003ebb,
+ 0x0f98020e,
+ 0x5021f503,
+ 0x070e9801,
+ 0xbb00effd,
+ 0x3ebb002e,
+ 0x0235b600,
+ 0xd30007f1,
+ 0xd00103f0,
0x04bd0003,
- 0x29f024bd,
- 0x0007f11f,
- 0x0203f030,
- 0xbd0002d0,
-/* 0x0505: main */
- 0x0031f404,
- 0xf00028f4,
- 0x21f424d7,
- 0xf401f439,
- 0xf404e4b0,
- 0x81fe1e18,
- 0x0627f001,
- 0x12fd20bd,
- 0x01e4b604,
- 0xfe051efd,
- 0x21f50018,
- 0x0ef405fa,
-/* 0x0535: main_not_ctx_xfer */
- 0x10ef94d3,
- 0xf501f5f0,
- 0xf4037e21,
-/* 0x0542: ih */
- 0x80f9c60e,
- 0xf90188fe,
- 0xf990f980,
- 0xf9b0f9a0,
- 0xf9e0f9d0,
- 0xf104bdf0,
- 0xf00200a7,
- 0xaacf00a3,
- 0x04abc400,
- 0xf02c0bf4,
- 0xe7f124d7,
- 0xe3f01a00,
- 0x00eecf00,
- 0x1900f7f1,
- 0xcf00f3f0,
- 0x21f400ff,
- 0x01e7f004,
- 0x1d0007f1,
- 0xd00003f0,
- 0x04bd000e,
-/* 0x0590: ih_no_fifo */
- 0x010007f1,
- 0xd00003f0,
- 0x04bd000a,
- 0xe0fcf0fc,
- 0xb0fcd0fc,
- 0x90fca0fc,
- 0x88fe80fc,
- 0xf480fc00,
- 0x01f80032,
-/* 0x05b4: hub_barrier_done */
- 0x9801f7f0,
- 0xfebb040e,
- 0x02ffb904,
- 0x9418e7f1,
- 0xf440e3f0,
- 0x00f89d21,
-/* 0x05cc: ctx_redswitch */
- 0xf120f7f0,
+ 0xb60825b6,
+ 0x20b60635,
+ 0x0130b601,
+ 0xb60824b6,
+ 0x2fb90834,
+ 0xd321f502,
+ 0x002fbb02,
+ 0xf1003fbb,
+ 0xf0010007,
+ 0x03d00203,
+ 0xbd04bd00,
+ 0x1f29f024,
+ 0x300007f1,
+ 0xd00203f0,
+ 0x04bd0002,
+/* 0x0508: main */
+ 0xf40031f4,
+ 0xd7f00028,
+ 0x3921f424,
+ 0xb0f401f4,
+ 0x18f404e4,
+ 0x0181fe1e,
+ 0xbd0627f0,
+ 0x0412fd20,
+ 0xfd01e4b6,
+ 0x18fe051e,
+ 0xfd21f500,
+ 0xd30ef405,
+/* 0x0538: main_not_ctx_xfer */
+ 0xf010ef94,
+ 0x21f501f5,
+ 0x0ef4037e,
+/* 0x0545: ih */
+ 0xfe80f9c6,
+ 0x80f90188,
+ 0xa0f990f9,
+ 0xd0f9b0f9,
+ 0xf0f9e0f9,
+ 0xa7f104bd,
+ 0xa3f00200,
+ 0x00aacf00,
+ 0xf404abc4,
+ 0xd7f02c0b,
+ 0x00e7f124,
+ 0x00e3f01a,
+ 0xf100eecf,
+ 0xf01900f7,
+ 0xffcf00f3,
+ 0x0421f400,
+ 0xf101e7f0,
+ 0xf01d0007,
+ 0x0ed00003,
+/* 0x0593: ih_no_fifo */
+ 0xf104bd00,
+ 0xf0010007,
+ 0x0ad00003,
+ 0xfc04bd00,
+ 0xfce0fcf0,
+ 0xfcb0fcd0,
+ 0xfc90fca0,
+ 0x0088fe80,
+ 0x32f480fc,
+/* 0x05b7: hub_barrier_done */
+ 0xf001f800,
+ 0x0e9801f7,
+ 0x04febb04,
+ 0xf102ffb9,
+ 0xf09418e7,
+ 0x21f440e3,
+/* 0x05cf: ctx_redswitch */
+ 0xf000f89d,
+ 0x07f120f7,
+ 0x03f08500,
+ 0x000fd001,
+ 0xe7f004bd,
+/* 0x05e1: ctx_redswitch_delay */
+ 0x01e2b608,
+ 0xf1fd1bf4,
+ 0xf10800f5,
+ 0xf10200f5,
0xf0850007,
0x0fd00103,
- 0xf004bd00,
-/* 0x05de: ctx_redswitch_delay */
- 0xe2b608e7,
- 0xfd1bf401,
- 0x0800f5f1,
- 0x0200f5f1,
- 0x850007f1,
- 0xd00103f0,
- 0x04bd000f,
-/* 0x05fa: ctx_xfer */
- 0x07f100f8,
- 0x03f08100,
- 0x000fd002,
- 0x11f404bd,
- 0xcc21f507,
-/* 0x060d: ctx_xfer_not_load */
- 0x6a21f505,
- 0xf124bd02,
- 0xf047fc07,
- 0x02d00203,
- 0xf004bd00,
- 0x20b6012c,
- 0xfc07f103,
- 0x0203f04a,
- 0xbd0002d0,
- 0x01acf004,
- 0xf102a5f0,
- 0xf00000b7,
- 0x0c9850b3,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98000c,
- 0x00e7f001,
- 0x016f21f5,
- 0xf101acf0,
- 0xf04000b7,
- 0x0c9850b3,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98010c,
- 0x060f9802,
- 0x0800e7f1,
- 0x016f21f5,
+ 0xf804bd00,
+/* 0x05fd: ctx_xfer */
+ 0x0007f100,
+ 0x0203f081,
+ 0xbd000fd0,
+ 0x0711f404,
+ 0x05cf21f5,
+/* 0x0610: ctx_xfer_not_load */
+ 0x026a21f5,
+ 0x07f124bd,
+ 0x03f047fc,
+ 0x0002d002,
+ 0x2cf004bd,
+ 0x0320b601,
+ 0x4afc07f1,
+ 0xd00203f0,
+ 0x04bd0002,
0xf001acf0,
- 0xb7f104a5,
- 0xb3f03000,
+ 0xb7f102a5,
+ 0xb3f00000,
0x040c9850,
0xbb0fc4b6,
0x0c9800bc,
- 0x030d9802,
- 0xf1080f98,
- 0xf50200e7,
- 0xf5016f21,
- 0xf4025e21,
- 0x12f40601,
-/* 0x06a9: ctx_xfer_post */
- 0x7f21f507,
-/* 0x06ad: ctx_xfer_done */
- 0xb421f502,
- 0x0000f805,
- 0x00000000,
+ 0x010d9800,
+ 0xf500e7f0,
+ 0xf0016f21,
+ 0xb7f101ac,
+ 0xb3f04000,
+ 0x040c9850,
+ 0xbb0fc4b6,
+ 0x0c9800bc,
+ 0x020d9801,
+ 0xf1060f98,
+ 0xf50800e7,
+ 0xf0016f21,
+ 0xa5f001ac,
+ 0x00b7f104,
+ 0x50b3f030,
+ 0xb6040c98,
+ 0xbcbb0fc4,
+ 0x020c9800,
+ 0x98030d98,
+ 0xe7f1080f,
+ 0x21f50200,
+ 0x21f5016f,
+ 0x01f4025e,
+ 0x0712f406,
+/* 0x06ac: ctx_xfer_post */
+ 0x027f21f5,
+/* 0x06b0: ctx_xfer_done */
+ 0x05b721f5,
+ 0x000000f8,
0x00000000,
0x00000000,
0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk208.fuc5.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk208.fuc5.h
index fbcc342..84af7ec 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk208.fuc5.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgk208.fuc5.h
@@ -276,7 +276,7 @@
0x02020014,
0xf6120040,
0x04bd0002,
- 0xfe048141,
+ 0xfe048441,
0x00400010,
0x0000f607,
0x040204bd,
@@ -295,165 +295,165 @@
0x01c90080,
0xbd0002f6,
0x0c308e04,
- 0xbd24bd50,
-/* 0x0383: init_unk_loop */
- 0x7e44bd34,
- 0xb0000065,
- 0x0bf400f6,
- 0xbb010f0e,
- 0x4ffd04f2,
- 0x0130b605,
-/* 0x0398: init_unk_next */
- 0xb60120b6,
- 0x26b004e0,
- 0xe21bf401,
-/* 0x03a4: init_unk_done */
- 0xb50703b5,
- 0x00820804,
- 0x22cf0201,
- 0x9534bd00,
- 0x00800825,
- 0x05f601c0,
- 0x8004bd00,
- 0xf601c100,
- 0x04bd0005,
- 0x98000e98,
- 0x207e010f,
- 0x2fbb0001,
- 0x003fbb00,
- 0x98010e98,
- 0x207e020f,
- 0x0e980001,
- 0x00effd05,
- 0xbb002ebb,
- 0x0e98003e,
- 0x030f9802,
- 0x0001207e,
- 0xfd070e98,
- 0x2ebb00ef,
- 0x003ebb00,
- 0x800235b6,
- 0xf601d300,
- 0x04bd0003,
- 0xb60825b6,
- 0x20b60635,
- 0x0130b601,
- 0xb60824b6,
- 0x2fb20834,
- 0x0002687e,
- 0xbb002fbb,
- 0x0080003f,
- 0x03f60201,
- 0xbd04bd00,
- 0x1f29f024,
- 0x02300080,
- 0xbd0002f6,
-/* 0x0445: main */
- 0x0031f404,
- 0x0d0028f4,
- 0x00377e24,
- 0xf401f400,
- 0xf404e4b0,
- 0x81fe1d18,
- 0xbd060201,
- 0x0412fd20,
- 0xfd01e4b6,
- 0x18fe051e,
- 0x05187e00,
- 0xd40ef400,
-/* 0x0474: main_not_ctx_xfer */
- 0xf010ef94,
- 0xf87e01f5,
- 0x0ef40002,
-/* 0x0481: ih */
- 0xfe80f9c7,
- 0x80f90188,
- 0xa0f990f9,
- 0xd0f9b0f9,
- 0xf0f9e0f9,
- 0x004a04bd,
- 0x00aacf02,
- 0xf404abc4,
- 0x240d1f0b,
- 0xcf1a004e,
- 0x004f00ee,
- 0x00ffcf19,
- 0x0000047e,
- 0x0040010e,
- 0x000ef61d,
-/* 0x04be: ih_no_fifo */
- 0x004004bd,
- 0x000af601,
- 0xf0fc04bd,
- 0xd0fce0fc,
- 0xa0fcb0fc,
- 0x80fc90fc,
- 0xfc0088fe,
- 0x0032f480,
-/* 0x04de: hub_barrier_done */
- 0x010f01f8,
- 0xbb040e98,
- 0xffb204fe,
- 0x4094188e,
- 0x00008f7e,
-/* 0x04f2: ctx_redswitch */
- 0x200f00f8,
+ 0x01e5f050,
+ 0x34bd24bd,
+/* 0x0386: init_unk_loop */
+ 0x657e44bd,
+ 0xf6b00000,
+ 0x0e0bf400,
+ 0xf2bb010f,
+ 0x054ffd04,
+/* 0x039b: init_unk_next */
+ 0xb60130b6,
+ 0xe0b60120,
+ 0x0126b004,
+/* 0x03a7: init_unk_done */
+ 0xb5e21bf4,
+ 0x04b50703,
+ 0x01008208,
+ 0x0022cf02,
+ 0x259534bd,
+ 0xc0008008,
+ 0x0005f601,
+ 0x008004bd,
+ 0x05f601c1,
+ 0x9804bd00,
+ 0x0f98000e,
+ 0x01207e01,
+ 0x002fbb00,
+ 0x98003fbb,
+ 0x0f98010e,
+ 0x01207e02,
+ 0x050e9800,
+ 0xbb00effd,
+ 0x3ebb002e,
+ 0x020e9800,
+ 0x7e030f98,
+ 0x98000120,
+ 0xeffd070e,
+ 0x002ebb00,
+ 0xb6003ebb,
+ 0x00800235,
+ 0x03f601d3,
+ 0xb604bd00,
+ 0x35b60825,
+ 0x0120b606,
+ 0xb60130b6,
+ 0x34b60824,
+ 0x7e2fb208,
+ 0xbb000268,
+ 0x3fbb002f,
+ 0x01008000,
+ 0x0003f602,
+ 0x24bd04bd,
+ 0x801f29f0,
+ 0xf6023000,
+ 0x04bd0002,
+/* 0x0448: main */
+ 0xf40031f4,
+ 0x240d0028,
+ 0x0000377e,
+ 0xb0f401f4,
+ 0x18f404e4,
+ 0x0181fe1d,
+ 0x20bd0602,
+ 0xb60412fd,
+ 0x1efd01e4,
+ 0x0018fe05,
+ 0x00051b7e,
+/* 0x0477: main_not_ctx_xfer */
+ 0x94d40ef4,
+ 0xf5f010ef,
+ 0x02f87e01,
+ 0xc70ef400,
+/* 0x0484: ih */
+ 0x88fe80f9,
+ 0xf980f901,
+ 0xf9a0f990,
+ 0xf9d0f9b0,
+ 0xbdf0f9e0,
+ 0x02004a04,
+ 0xc400aacf,
+ 0x0bf404ab,
+ 0x4e240d1f,
+ 0xeecf1a00,
+ 0x19004f00,
+ 0x7e00ffcf,
+ 0x0e000004,
+ 0x1d004001,
+ 0xbd000ef6,
+/* 0x04c1: ih_no_fifo */
+ 0x01004004,
+ 0xbd000af6,
+ 0xfcf0fc04,
+ 0xfcd0fce0,
+ 0xfca0fcb0,
+ 0xfe80fc90,
+ 0x80fc0088,
+ 0xf80032f4,
+/* 0x04e1: hub_barrier_done */
+ 0x98010f01,
+ 0xfebb040e,
+ 0x8effb204,
+ 0x7e409418,
+ 0xf800008f,
+/* 0x04f5: ctx_redswitch */
+ 0x80200f00,
+ 0xf6018500,
+ 0x04bd000f,
+/* 0x0502: ctx_redswitch_delay */
+ 0xe2b6080e,
+ 0xfd1bf401,
+ 0x0800f5f1,
+ 0x0200f5f1,
0x01850080,
0xbd000ff6,
-/* 0x04ff: ctx_redswitch_delay */
- 0xb6080e04,
- 0x1bf401e2,
- 0x00f5f1fd,
- 0x00f5f108,
- 0x85008002,
- 0x000ff601,
- 0x00f804bd,
-/* 0x0518: ctx_xfer */
- 0x02810080,
- 0xbd000ff6,
- 0x0711f404,
- 0x0004f27e,
-/* 0x0528: ctx_xfer_not_load */
- 0x0002167e,
- 0xfc8024bd,
- 0x02f60247,
- 0xf004bd00,
- 0x20b6012c,
- 0x4afc8003,
+/* 0x051b: ctx_xfer */
+ 0x8000f804,
+ 0xf6028100,
+ 0x04bd000f,
+ 0x7e0711f4,
+/* 0x052b: ctx_xfer_not_load */
+ 0x7e0004f5,
+ 0xbd000216,
+ 0x47fc8024,
0x0002f602,
- 0xacf004bd,
- 0x02a5f001,
- 0x5000008b,
- 0xb6040c98,
- 0xbcbb0fc4,
- 0x000c9800,
- 0x0e010d98,
- 0x013d7e00,
- 0x01acf000,
- 0x5040008b,
- 0xb6040c98,
- 0xbcbb0fc4,
- 0x010c9800,
- 0x98020d98,
- 0x004e060f,
- 0x013d7e08,
- 0x01acf000,
- 0x8b04a5f0,
- 0x98503000,
+ 0x2cf004bd,
+ 0x0320b601,
+ 0x024afc80,
+ 0xbd0002f6,
+ 0x01acf004,
+ 0x8b02a5f0,
+ 0x98500000,
0xc4b6040c,
0x00bcbb0f,
- 0x98020c98,
- 0x0f98030d,
- 0x02004e08,
+ 0x98000c98,
+ 0x000e010d,
0x00013d7e,
- 0x00020a7e,
- 0xf40601f4,
-/* 0x05b2: ctx_xfer_post */
- 0x277e0712,
-/* 0x05b6: ctx_xfer_done */
- 0xde7e0002,
- 0x00f80004,
- 0x00000000,
+ 0x8b01acf0,
+ 0x98504000,
+ 0xc4b6040c,
+ 0x00bcbb0f,
+ 0x98010c98,
+ 0x0f98020d,
+ 0x08004e06,
+ 0x00013d7e,
+ 0xf001acf0,
+ 0x008b04a5,
+ 0x0c985030,
+ 0x0fc4b604,
+ 0x9800bcbb,
+ 0x0d98020c,
+ 0x080f9803,
+ 0x7e02004e,
+ 0x7e00013d,
+ 0xf400020a,
+ 0x12f40601,
+/* 0x05b5: ctx_xfer_post */
+ 0x02277e07,
+/* 0x05b9: ctx_xfer_done */
+ 0x04e17e00,
+ 0x0000f800,
0x00000000,
0x00000000,
0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h
index 51f5c3c..11bf363 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/fuc/gpcgm107.fuc5.h
@@ -289,7 +289,7 @@
0x020014fe,
0x12004002,
0xbd0002f6,
- 0x05b04104,
+ 0x05b34104,
0x400010fe,
0x00f60700,
0x0204bd00,
@@ -308,259 +308,259 @@
0xc900800f,
0x0002f601,
0x308e04bd,
- 0x24bd500c,
- 0x44bd34bd,
-/* 0x03b0: init_unk_loop */
- 0x0000657e,
- 0xf400f6b0,
- 0x010f0e0b,
- 0xfd04f2bb,
- 0x30b6054f,
-/* 0x03c5: init_unk_next */
- 0x0120b601,
- 0xb004e0b6,
- 0x1bf40226,
-/* 0x03d1: init_unk_done */
- 0x0703b5e2,
- 0x820804b5,
- 0xcf020100,
- 0x34bd0022,
- 0x80082595,
- 0xf601c000,
+ 0xe5f0500c,
+ 0xbd24bd01,
+/* 0x03b3: init_unk_loop */
+ 0x7e44bd34,
+ 0xb0000065,
+ 0x0bf400f6,
+ 0xbb010f0e,
+ 0x4ffd04f2,
+ 0x0130b605,
+/* 0x03c8: init_unk_next */
+ 0xb60120b6,
+ 0x26b004e0,
+ 0xe21bf402,
+/* 0x03d4: init_unk_done */
+ 0xb50703b5,
+ 0x00820804,
+ 0x22cf0201,
+ 0x9534bd00,
+ 0x00800825,
+ 0x05f601c0,
+ 0x8004bd00,
+ 0xf601c100,
0x04bd0005,
- 0x01c10080,
- 0xbd0005f6,
- 0x000e9804,
- 0x7e010f98,
- 0xbb000120,
- 0x3fbb002f,
- 0x010e9800,
- 0x7e020f98,
- 0x98000120,
- 0xeffd050e,
- 0x002ebb00,
- 0x98003ebb,
- 0x0f98020e,
- 0x01207e03,
- 0x070e9800,
- 0xbb00effd,
- 0x3ebb002e,
- 0x0235b600,
- 0x01d30080,
- 0xbd0003f6,
- 0x0825b604,
- 0xb60635b6,
- 0x30b60120,
- 0x0824b601,
- 0xb20834b6,
- 0x02687e2f,
- 0x002fbb00,
- 0x0f003fbb,
- 0x8effb23f,
- 0xf0501d60,
- 0x8f7e01e5,
- 0x0c0f0000,
- 0xa88effb2,
- 0xe5f0501d,
- 0x008f7e01,
- 0x03147e00,
- 0xb23f0f00,
- 0x1d608eff,
- 0x01e5f050,
- 0x00008f7e,
- 0xffb2000f,
- 0x501d9c8e,
- 0x7e01e5f0,
- 0x0f00008f,
- 0x03147e01,
- 0x8effb200,
+ 0x98000e98,
+ 0x207e010f,
+ 0x2fbb0001,
+ 0x003fbb00,
+ 0x98010e98,
+ 0x207e020f,
+ 0x0e980001,
+ 0x00effd05,
+ 0xbb002ebb,
+ 0x0e98003e,
+ 0x030f9802,
+ 0x0001207e,
+ 0xfd070e98,
+ 0x2ebb00ef,
+ 0x003ebb00,
+ 0x800235b6,
+ 0xf601d300,
+ 0x04bd0003,
+ 0xb60825b6,
+ 0x20b60635,
+ 0x0130b601,
+ 0xb60824b6,
+ 0x2fb20834,
+ 0x0002687e,
+ 0xbb002fbb,
+ 0x3f0f003f,
+ 0x501d608e,
+ 0xb201e5f0,
+ 0x008f7eff,
+ 0x8e0c0f00,
0xf0501da8,
- 0x8f7e01e5,
- 0xff0f0000,
- 0x988effb2,
- 0xe5f0501d,
- 0x008f7e01,
- 0xb2020f00,
- 0x1da88eff,
- 0x01e5f050,
+ 0xffb201e5,
0x00008f7e,
0x0003147e,
- 0x85050498,
- 0x98504000,
- 0x64b60406,
- 0x0056bb0f,
-/* 0x04e0: tpc_strand_init_tpc_loop */
- 0x05705eb8,
- 0x00657e00,
- 0xbdf6b200,
-/* 0x04ed: tpc_strand_init_idx_loop */
- 0x605eb874,
- 0x7fb20005,
- 0x00008f7e,
- 0x05885eb8,
- 0x082f9500,
- 0x00008f7e,
- 0x058c5eb8,
- 0x082f9500,
- 0x00008f7e,
- 0x05905eb8,
- 0x00657e00,
- 0x06f5b600,
- 0xb601f0b6,
- 0x2fbb08f4,
- 0x003fbb00,
- 0xb60170b6,
- 0x1bf40162,
- 0x0050b7bf,
- 0x0142b608,
- 0x0fa81bf4,
- 0x8effb23f,
- 0xf0501d60,
- 0x8f7e01e5,
- 0x0d0f0000,
- 0xa88effb2,
+ 0x608e3f0f,
0xe5f0501d,
- 0x008f7e01,
- 0x03147e00,
- 0x01008000,
- 0x0003f602,
- 0x24bd04bd,
- 0x801f29f0,
- 0xf6023000,
- 0x04bd0002,
-/* 0x0574: main */
- 0xf40031f4,
- 0x240d0028,
- 0x0000377e,
- 0xb0f401f4,
- 0x18f404e4,
- 0x0181fe1d,
- 0x20bd0602,
- 0xb60412fd,
- 0x1efd01e4,
- 0x0018fe05,
- 0x0006477e,
-/* 0x05a3: main_not_ctx_xfer */
- 0x94d40ef4,
- 0xf5f010ef,
- 0x02f87e01,
- 0xc70ef400,
-/* 0x05b0: ih */
- 0x88fe80f9,
- 0xf980f901,
- 0xf9a0f990,
- 0xf9d0f9b0,
- 0xbdf0f9e0,
- 0x02004a04,
- 0xc400aacf,
- 0x0bf404ab,
- 0x4e240d1f,
- 0xeecf1a00,
- 0x19004f00,
- 0x7e00ffcf,
- 0x0e000004,
- 0x1d004001,
- 0xbd000ef6,
-/* 0x05ed: ih_no_fifo */
- 0x01004004,
- 0xbd000af6,
- 0xfcf0fc04,
- 0xfcd0fce0,
- 0xfca0fcb0,
- 0xfe80fc90,
- 0x80fc0088,
- 0xf80032f4,
-/* 0x060d: hub_barrier_done */
- 0x98010f01,
- 0xfebb040e,
- 0x8effb204,
- 0x7e409418,
- 0xf800008f,
-/* 0x0621: ctx_redswitch */
- 0x80200f00,
+ 0x7effb201,
+ 0x0f00008f,
+ 0x1d9c8e00,
+ 0x01e5f050,
+ 0x8f7effb2,
+ 0x010f0000,
+ 0x0003147e,
+ 0x501da88e,
+ 0xb201e5f0,
+ 0x008f7eff,
+ 0x8eff0f00,
+ 0xf0501d98,
+ 0xffb201e5,
+ 0x00008f7e,
+ 0xa88e020f,
+ 0xe5f0501d,
+ 0x7effb201,
+ 0x7e00008f,
+ 0x98000314,
+ 0x00850504,
+ 0x06985040,
+ 0x0f64b604,
+/* 0x04e3: tpc_strand_init_tpc_loop */
+ 0xb80056bb,
+ 0x0005705e,
+ 0x0000657e,
+ 0x74bdf6b2,
+/* 0x04f0: tpc_strand_init_idx_loop */
+ 0x05605eb8,
+ 0x7e7fb200,
+ 0xb800008f,
+ 0x0005885e,
+ 0x7e082f95,
+ 0xb800008f,
+ 0x00058c5e,
+ 0x7e082f95,
+ 0xb800008f,
+ 0x0005905e,
+ 0x0000657e,
+ 0xb606f5b6,
+ 0xf4b601f0,
+ 0x002fbb08,
+ 0xb6003fbb,
+ 0x62b60170,
+ 0xbf1bf401,
+ 0x080050b7,
+ 0xf40142b6,
+ 0x3f0fa81b,
+ 0x501d608e,
+ 0xb201e5f0,
+ 0x008f7eff,
+ 0x8e0d0f00,
+ 0xf0501da8,
+ 0xffb201e5,
+ 0x00008f7e,
+ 0x0003147e,
+ 0x02010080,
+ 0xbd0003f6,
+ 0xf024bd04,
+ 0x00801f29,
+ 0x02f60230,
+/* 0x0577: main */
+ 0xf404bd00,
+ 0x28f40031,
+ 0x7e240d00,
+ 0xf4000037,
+ 0xe4b0f401,
+ 0x1d18f404,
+ 0x020181fe,
+ 0xfd20bd06,
+ 0xe4b60412,
+ 0x051efd01,
+ 0x7e0018fe,
+ 0xf400064a,
+/* 0x05a6: main_not_ctx_xfer */
+ 0xef94d40e,
+ 0x01f5f010,
+ 0x0002f87e,
+/* 0x05b3: ih */
+ 0xf9c70ef4,
+ 0x0188fe80,
+ 0x90f980f9,
+ 0xb0f9a0f9,
+ 0xe0f9d0f9,
+ 0x04bdf0f9,
+ 0xcf02004a,
+ 0xabc400aa,
+ 0x1f0bf404,
+ 0x004e240d,
+ 0x00eecf1a,
+ 0xcf19004f,
+ 0x047e00ff,
+ 0x010e0000,
+ 0xf61d0040,
+ 0x04bd000e,
+/* 0x05f0: ih_no_fifo */
+ 0xf6010040,
+ 0x04bd000a,
+ 0xe0fcf0fc,
+ 0xb0fcd0fc,
+ 0x90fca0fc,
+ 0x88fe80fc,
+ 0xf480fc00,
+ 0x01f80032,
+/* 0x0610: hub_barrier_done */
+ 0x0e98010f,
+ 0x04febb04,
+ 0x188effb2,
+ 0x8f7e4094,
+ 0x00f80000,
+/* 0x0624: ctx_redswitch */
+ 0x0080200f,
+ 0x0ff60185,
+ 0x0e04bd00,
+/* 0x0631: ctx_redswitch_delay */
+ 0x01e2b608,
+ 0xf1fd1bf4,
+ 0xf10800f5,
+ 0x800200f5,
0xf6018500,
0x04bd000f,
-/* 0x062e: ctx_redswitch_delay */
- 0xe2b6080e,
- 0xfd1bf401,
- 0x0800f5f1,
- 0x0200f5f1,
- 0x01850080,
- 0xbd000ff6,
-/* 0x0647: ctx_xfer */
- 0x8000f804,
- 0xf6028100,
- 0x04bd000f,
- 0xc48effb2,
- 0xe5f0501d,
- 0x008f7e01,
- 0x0711f400,
- 0x0006217e,
-/* 0x0664: ctx_xfer_not_load */
- 0x0002167e,
- 0xfc8024bd,
- 0x02f60247,
- 0xf004bd00,
- 0x20b6012c,
- 0x4afc8003,
+/* 0x064a: ctx_xfer */
+ 0x008000f8,
+ 0x0ff60281,
+ 0x8e04bd00,
+ 0xf0501dc4,
+ 0xffb201e5,
+ 0x00008f7e,
+ 0x7e0711f4,
+/* 0x0667: ctx_xfer_not_load */
+ 0x7e000624,
+ 0xbd000216,
+ 0x47fc8024,
0x0002f602,
- 0x0c0f04bd,
- 0xa88effb2,
+ 0x2cf004bd,
+ 0x0320b601,
+ 0x024afc80,
+ 0xbd0002f6,
+ 0x8e0c0f04,
+ 0xf0501da8,
+ 0xffb201e5,
+ 0x00008f7e,
+ 0x0003147e,
+ 0x608e3f0f,
0xe5f0501d,
- 0x008f7e01,
- 0x03147e00,
- 0xb23f0f00,
- 0x1d608eff,
- 0x01e5f050,
- 0x00008f7e,
- 0xffb2000f,
- 0x501d9c8e,
- 0x7e01e5f0,
+ 0x7effb201,
0x0f00008f,
- 0x03147e01,
- 0x01fcf000,
- 0xb203f0b6,
- 0x1da88eff,
+ 0x1d9c8e00,
0x01e5f050,
- 0x00008f7e,
- 0xf001acf0,
- 0x008b02a5,
- 0x0c985000,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98000c,
- 0x7e000e01,
- 0xf000013d,
- 0x008b01ac,
- 0x0c985040,
- 0x0fc4b604,
- 0x9800bcbb,
- 0x0d98010c,
- 0x060f9802,
- 0x7e08004e,
- 0xf000013d,
+ 0x8f7effb2,
+ 0x010f0000,
+ 0x0003147e,
+ 0xb601fcf0,
+ 0xa88e03f0,
+ 0xe5f0501d,
+ 0x7effb201,
+ 0xf000008f,
0xa5f001ac,
- 0x30008b04,
+ 0x00008b02,
0x040c9850,
0xbb0fc4b6,
0x0c9800bc,
- 0x030d9802,
- 0x4e080f98,
- 0x3d7e0200,
- 0x0a7e0001,
- 0x147e0002,
- 0x01f40003,
- 0x1a12f406,
-/* 0x073c: ctx_xfer_post */
- 0x0002277e,
- 0xffb20d0f,
- 0x501da88e,
- 0x7e01e5f0,
- 0x7e00008f,
-/* 0x0753: ctx_xfer_done */
- 0x7e000314,
- 0xf800060d,
- 0x00000000,
+ 0x010d9800,
+ 0x3d7e000e,
+ 0xacf00001,
+ 0x40008b01,
+ 0x040c9850,
+ 0xbb0fc4b6,
+ 0x0c9800bc,
+ 0x020d9801,
+ 0x4e060f98,
+ 0x3d7e0800,
+ 0xacf00001,
+ 0x04a5f001,
+ 0x5030008b,
+ 0xb6040c98,
+ 0xbcbb0fc4,
+ 0x020c9800,
+ 0x98030d98,
+ 0x004e080f,
+ 0x013d7e02,
+ 0x020a7e00,
+ 0x03147e00,
+ 0x0601f400,
+/* 0x073f: ctx_xfer_post */
+ 0x7e1a12f4,
+ 0x0f000227,
+ 0x1da88e0d,
+ 0x01e5f050,
+ 0x8f7effb2,
+ 0x147e0000,
+/* 0x0756: ctx_xfer_done */
+ 0x107e0003,
+ 0x00f80006,
0x00000000,
0x00000000,
0x00000000,
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
index dda7a7d..9f5dfc8 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c
@@ -143,7 +143,7 @@
static int
gf100_fermi_mthd_zbc_color(struct nvkm_object *object, void *data, u32 size)
{
- struct gf100_gr *gr = (void *)object->engine;
+ struct gf100_gr *gr = gf100_gr(nvkm_gr(object->engine));
union {
struct fermi_a_zbc_color_v0 v0;
} *args = data;
@@ -189,7 +189,7 @@
static int
gf100_fermi_mthd_zbc_depth(struct nvkm_object *object, void *data, u32 size)
{
- struct gf100_gr *gr = (void *)object->engine;
+ struct gf100_gr *gr = gf100_gr(nvkm_gr(object->engine));
union {
struct fermi_a_zbc_depth_v0 v0;
} *args = data;
@@ -1530,6 +1530,8 @@
gr->ppc_nr[i] = gr->func->ppc_nr;
for (j = 0; j < gr->ppc_nr[i]; j++) {
u8 mask = nvkm_rd32(device, GPC_UNIT(i, 0x0c30 + (j * 4)));
+ if (mask)
+ gr->ppc_mask[i] |= (1 << j);
gr->ppc_tpc_nr[i][j] = hweight8(mask);
}
}
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.h b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.h
index 4611961..02e78b8 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.h
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.h
@@ -97,6 +97,7 @@
u8 tpc_nr[GPC_MAX];
u8 tpc_total;
u8 ppc_nr[GPC_MAX];
+ u8 ppc_mask[GPC_MAX];
u8 ppc_tpc_nr[GPC_MAX][4];
struct nvkm_memory *unk4188b4;
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/base.c
index 895ba74..1d7dd38 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/base.c
@@ -97,7 +97,9 @@
nvkm_instobj_dtor(struct nvkm_memory *memory)
{
struct nvkm_instobj *iobj = nvkm_instobj(memory);
+ spin_lock(&iobj->imem->lock);
list_del(&iobj->head);
+ spin_unlock(&iobj->imem->lock);
nvkm_memory_del(&iobj->parent);
return iobj;
}
@@ -190,7 +192,9 @@
nvkm_memory_ctor(&nvkm_instobj_func_slow, &iobj->memory);
iobj->parent = memory;
iobj->imem = imem;
+ spin_lock(&iobj->imem->lock);
list_add_tail(&iobj->head, &imem->list);
+ spin_unlock(&iobj->imem->lock);
memory = &iobj->memory;
}
@@ -309,5 +313,6 @@
{
nvkm_subdev_ctor(&nvkm_instmem, device, index, 0, &imem->subdev);
imem->func = func;
+ spin_lock_init(&imem->lock);
INIT_LIST_HEAD(&imem->list);
}
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/volt/gk104.c b/drivers/gpu/drm/nouveau/nvkm/subdev/volt/gk104.c
index b61509e..b735173 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/volt/gk104.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/volt/gk104.c
@@ -59,7 +59,7 @@
duty = (uv - bios->base) * div / bios->pwm_range;
nvkm_wr32(device, 0x20340, div);
- nvkm_wr32(device, 0x20344, 0x8000000 | duty);
+ nvkm_wr32(device, 0x20344, 0x80000000 | duty);
return 0;
}
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index d302488..84d4563 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -221,11 +221,17 @@
if (!(rdev->flags & RADEON_IS_PCIE))
bo->flags &= ~(RADEON_GEM_GTT_WC | RADEON_GEM_GTT_UC);
+ /* Write-combined CPU mappings of GTT cause GPU hangs with RV6xx
+ * See https://bugs.freedesktop.org/show_bug.cgi?id=91268
+ */
+ if (rdev->family >= CHIP_RV610 && rdev->family <= CHIP_RV635)
+ bo->flags &= ~(RADEON_GEM_GTT_WC | RADEON_GEM_GTT_UC);
+
#ifdef CONFIG_X86_32
/* XXX: Write-combined CPU mappings of GTT seem broken on 32-bit
* See https://bugs.freedesktop.org/show_bug.cgi?id=84627
*/
- bo->flags &= ~RADEON_GEM_GTT_WC;
+ bo->flags &= ~(RADEON_GEM_GTT_WC | RADEON_GEM_GTT_UC);
#elif defined(CONFIG_X86) && !defined(CONFIG_X86_PAT)
/* Don't try to enable write-combining when it can't work, or things
* may be slow
@@ -235,9 +241,10 @@
#warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \
thanks to write-combining
- DRM_INFO_ONCE("Please enable CONFIG_MTRR and CONFIG_X86_PAT for "
- "better performance thanks to write-combining\n");
- bo->flags &= ~RADEON_GEM_GTT_WC;
+ if (bo->flags & RADEON_GEM_GTT_WC)
+ DRM_INFO_ONCE("Please enable CONFIG_MTRR and CONFIG_X86_PAT for "
+ "better performance thanks to write-combining\n");
+ bo->flags &= ~(RADEON_GEM_GTT_WC | RADEON_GEM_GTT_UC);
#endif
radeon_ttm_placement_from_domain(bo, domain);
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 6d80dde..f4f03dc 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1542,8 +1542,7 @@
ret = device_create_file(rdev->dev, &dev_attr_power_method);
if (ret)
DRM_ERROR("failed to create device file for power method\n");
- if (!ret)
- rdev->pm.sysfs_initialized = true;
+ rdev->pm.sysfs_initialized = true;
}
mutex_lock(&rdev->pm.mutex);
diff --git a/drivers/gpu/drm/radeon/rv730_dpm.c b/drivers/gpu/drm/radeon/rv730_dpm.c
index 3f5e1cf..d37ba2c 100644
--- a/drivers/gpu/drm/radeon/rv730_dpm.c
+++ b/drivers/gpu/drm/radeon/rv730_dpm.c
@@ -464,7 +464,7 @@
result = rv770_send_msg_to_smc(rdev, PPSMC_MSG_TwoLevelsDisabled);
if (result != PPSMC_Result_OK)
- DRM_ERROR("Could not force DPM to low\n");
+ DRM_DEBUG("Could not force DPM to low\n");
WREG32_P(GENERAL_PWRMGT, 0, ~GLOBAL_PWRMGT_EN);
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c
index b9c7707..e830c89 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -193,7 +193,7 @@
result = rv770_send_msg_to_smc(rdev, PPSMC_MSG_TwoLevelsDisabled);
if (result != PPSMC_Result_OK)
- DRM_ERROR("Could not force DPM to low.\n");
+ DRM_DEBUG("Could not force DPM to low.\n");
WREG32_P(GENERAL_PWRMGT, 0, ~GLOBAL_PWRMGT_EN);
@@ -1418,7 +1418,7 @@
int rv770_set_sw_state(struct radeon_device *rdev)
{
if (rv770_send_msg_to_smc(rdev, PPSMC_MSG_SwitchToSwState) != PPSMC_Result_OK)
- return -EINVAL;
+ DRM_DEBUG("rv770_set_sw_state failed\n");
return 0;
}
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index e72bf46..a82b891 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2927,7 +2927,7 @@
{ PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
{ PCI_VENDOR_ID_ATI, 0x6811, 0x174b, 0xe271, 0, 120000 },
{ PCI_VENDOR_ID_ATI, 0x6810, 0x174b, 0xe271, 85000, 90000 },
- { PCI_VENDOR_ID_ATI, 0x6811, 0x1762, 0x2015, 0, 120000 },
+ { PCI_VENDOR_ID_ATI, 0x6811, 0x1462, 0x2015, 0, 120000 },
{ PCI_VENDOR_ID_ATI, 0x6811, 0x1043, 0x2015, 0, 120000 },
{ 0, 0, 0, 0 },
};
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 7a9f476..265064c 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -168,7 +168,7 @@
struct drm_connector *connector;
drm_for_each_connector(connector, crtc->dev) {
- if (connector && connector->state->crtc == crtc) {
+ if (connector->state->crtc == crtc) {
struct drm_encoder *encoder = connector->encoder;
struct vc4_encoder *vc4_encoder =
to_vc4_encoder(encoder);
@@ -401,7 +401,8 @@
dlist_next++;
HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
- (u32 *)vc4_crtc->dlist - (u32 *)vc4->hvs->dlist);
+ (u32 __iomem *)vc4_crtc->dlist -
+ (u32 __iomem *)vc4->hvs->dlist);
/* Make the next display list start after ours. */
vc4_crtc->dlist_size -= (dlist_next - vc4_crtc->dlist);
@@ -591,14 +592,14 @@
* that will take too much.
*/
primary_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_PRIMARY);
- if (!primary_plane) {
+ if (IS_ERR(primary_plane)) {
dev_err(dev, "failed to construct primary plane\n");
ret = PTR_ERR(primary_plane);
goto err;
}
cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
- if (!cursor_plane) {
+ if (IS_ERR(cursor_plane)) {
dev_err(dev, "failed to construct cursor plane\n");
ret = PTR_ERR(cursor_plane);
goto err_primary;
diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index 6e73060..d5db9e0 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -259,7 +259,6 @@
.remove = vc4_platform_drm_remove,
.driver = {
.name = "vc4-drm",
- .owner = THIS_MODULE,
.of_match_table = vc4_of_match,
},
};
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index ab1673f..8098c5b 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -75,10 +75,10 @@
for (i = 0; i < 64; i += 4) {
DRM_INFO("0x%08x (%s): 0x%08x 0x%08x 0x%08x 0x%08x\n",
i * 4, i < HVS_BOOTLOADER_DLIST_END ? "B" : "D",
- ((uint32_t *)vc4->hvs->dlist)[i + 0],
- ((uint32_t *)vc4->hvs->dlist)[i + 1],
- ((uint32_t *)vc4->hvs->dlist)[i + 2],
- ((uint32_t *)vc4->hvs->dlist)[i + 3]);
+ readl((u32 __iomem *)vc4->hvs->dlist + i + 0),
+ readl((u32 __iomem *)vc4->hvs->dlist + i + 1),
+ readl((u32 __iomem *)vc4->hvs->dlist + i + 2),
+ readl((u32 __iomem *)vc4->hvs->dlist + i + 3));
}
}
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index cdd8b10..887f3ca 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -70,7 +70,7 @@
return state->fb && state->crtc;
}
-struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane)
+static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane)
{
struct vc4_plane_state *vc4_state;
@@ -97,8 +97,8 @@
return &vc4_state->base;
}
-void vc4_plane_destroy_state(struct drm_plane *plane,
- struct drm_plane_state *state)
+static void vc4_plane_destroy_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
{
struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
@@ -108,7 +108,7 @@
}
/* Called during init to allocate the plane's atomic state. */
-void vc4_plane_reset(struct drm_plane *plane)
+static void vc4_plane_reset(struct drm_plane *plane)
{
struct vc4_plane_state *vc4_state;
@@ -157,6 +157,16 @@
int crtc_w = state->crtc_w;
int crtc_h = state->crtc_h;
+ if (state->crtc_w << 16 != state->src_w ||
+ state->crtc_h << 16 != state->src_h) {
+ /* We don't support scaling yet, which involves
+ * allocating the LBM memory for scaling temporary
+ * storage, and putting filter kernels in the HVS
+ * context.
+ */
+ return -EINVAL;
+ }
+
if (crtc_x < 0) {
offset += drm_format_plane_cpp(fb->pixel_format, 0) * -crtc_x;
crtc_w += crtc_x;
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 8b29949..01a4f05 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2481,7 +2481,7 @@
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
if (features->touch_max)
features->device_type |= WACOM_DEVICETYPE_TOUCH;
- if (features->type >= INTUOSHT || features->type <= BAMBOO_PT)
+ if (features->type >= INTUOSHT && features->type <= BAMBOO_PT)
features->device_type |= WACOM_DEVICETYPE_PAD;
features->x_max = 4096;
@@ -3213,7 +3213,8 @@
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x336 =
{ "Wacom DTU1141", 23472, 13203, 1023, 0,
- DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 };
+ DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
+ WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x57 =
{ "Wacom DTK2241", 95640, 54060, 2047, 63,
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 842b004..8f59f05 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -324,6 +324,7 @@
config SENSORS_ARM_SCPI
tristate "ARM SCPI Sensors"
depends on ARM_SCPI_PROTOCOL
+ depends on THERMAL || !THERMAL_OF
help
This driver provides support for temperature, voltage, current
and power sensors available on ARM Ltd's SCP based platforms. The
@@ -1471,6 +1472,7 @@
config SENSORS_INA2XX
tristate "Texas Instruments INA219 and compatibles"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here you get support for INA219, INA220, INA226,
INA230, and INA231 power monitor chips.
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 1f5e956..0af7fd3 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -537,7 +537,7 @@
static int applesmc_init_smcreg_try(void)
{
struct applesmc_registers *s = &smcreg;
- bool left_light_sensor, right_light_sensor;
+ bool left_light_sensor = 0, right_light_sensor = 0;
unsigned int count;
u8 tmp[1];
int ret;
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 2c1241b..7e20567 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -117,7 +117,7 @@
struct scpi_ops *scpi_ops;
struct device *hwdev, *dev = &pdev->dev;
struct scpi_sensors *scpi_sensors;
- int ret;
+ int ret, idx;
scpi_ops = get_scpi_ops();
if (!scpi_ops)
@@ -146,8 +146,8 @@
scpi_sensors->scpi_ops = scpi_ops;
- for (i = 0; i < nr_sensors; i++) {
- struct sensor_data *sensor = &scpi_sensors->data[i];
+ for (i = 0, idx = 0; i < nr_sensors; i++) {
+ struct sensor_data *sensor = &scpi_sensors->data[idx];
ret = scpi_ops->sensor_get_info(i, &sensor->info);
if (ret)
@@ -183,7 +183,7 @@
num_power++;
break;
default:
- break;
+ continue;
}
sensor->dev_attr_input.attr.mode = S_IRUGO;
@@ -194,11 +194,12 @@
sensor->dev_attr_label.show = scpi_show_label;
sensor->dev_attr_label.attr.name = sensor->label;
- scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
- scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
+ scpi_sensors->attrs[idx << 1] = &sensor->dev_attr_input.attr;
+ scpi_sensors->attrs[(idx << 1) + 1] = &sensor->dev_attr_label.attr;
- sysfs_attr_init(scpi_sensors->attrs[i << 1]);
- sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
+ sysfs_attr_init(scpi_sensors->attrs[idx << 1]);
+ sysfs_attr_init(scpi_sensors->attrs[(idx << 1) + 1]);
+ idx++;
}
scpi_sensors->group.attrs = scpi_sensors->attrs;
@@ -236,8 +237,8 @@
zone->sensor_id = i;
zone->scpi_sensors = scpi_sensors;
- zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
- &scpi_sensor_ops);
+ zone->tzd = thermal_zone_of_sensor_register(dev,
+ sensor->info.sensor_id, zone, &scpi_sensor_ops);
/*
* The call to thermal_zone_of_sensor_register returns
* an error for sensors that are not associated with
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e24c2b6..7b0aa82 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -126,6 +126,7 @@
Sunrise Point-LP (PCH)
DNV (SOC)
Broxton (SOC)
+ Lewisburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index c306751..f62d697 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,8 @@
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
+ * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
+ * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -206,6 +208,8 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
struct i801_mux_config {
char *gpio_chip;
@@ -869,6 +873,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1e4d99d..9bb0b05 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -50,6 +50,7 @@
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index e23a7b0..0b20449 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -662,8 +662,10 @@
static void xiic_start_xfer(struct xiic_i2c *i2c)
{
-
+ spin_lock(&i2c->lock);
+ xiic_reinit(i2c);
__xiic_start_xfer(i2c);
+ spin_unlock(&i2c->lock);
}
static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 040af5c..ba8eb08 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -715,7 +715,7 @@
if (wakeirq > 0 && wakeirq != client->irq)
status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
else if (client->irq > 0)
- status = dev_pm_set_wake_irq(dev, wakeirq);
+ status = dev_pm_set_wake_irq(dev, client->irq);
else
status = 0;
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index eea0c79..4d960d3 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -101,7 +101,7 @@
#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */
/* ID Register Bit Designations (AD7793_REG_ID) */
-#define AD7785_ID 0xB
+#define AD7785_ID 0x3
#define AD7792_ID 0xA
#define AD7793_ID 0xB
#define AD7794_ID 0xF
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 599cde3..b10f629 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -106,6 +106,13 @@
#define DEFAULT_SAMPLE_TIME 1000
+/* V at 25°C of 696 mV */
+#define VF610_VTEMP25_3V0 950
+/* V at 25°C of 699 mV */
+#define VF610_VTEMP25_3V3 867
+/* Typical sensor slope coefficient at all temperatures */
+#define VF610_TEMP_SLOPE_COEFF 1840
+
enum clk_sel {
VF610_ADCIOC_BUSCLK_SET,
VF610_ADCIOC_ALTCLK_SET,
@@ -197,6 +204,8 @@
adc_feature->clk_div = 8;
}
+ adck_rate = ipg_rate / adc_feature->clk_div;
+
/*
* Determine the long sample time adder value to be used based
* on the default minimum sample time provided.
@@ -221,7 +230,6 @@
* BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
* LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles
*/
- adck_rate = ipg_rate / info->adc_feature.clk_div;
for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
info->sample_freq_avail[i] =
adck_rate / (6 + vf610_hw_avgs[i] *
@@ -663,11 +671,13 @@
break;
case IIO_TEMP:
/*
- * Calculate in degree Celsius times 1000
- * Using sensor slope of 1.84 mV/°C and
- * V at 25°C of 696 mV
- */
- *val = 25000 - ((int)info->value - 864) * 1000000 / 1840;
+ * Calculate in degree Celsius times 1000
+ * Using the typical sensor slope of 1.84 mV/°C
+ * and VREFH_ADC at 3.3V, V at 25°C of 699 mV
+ */
+ *val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) *
+ 1000000 / VF610_TEMP_SLOPE_COEFF;
+
break;
default:
mutex_unlock(&indio_dev->mlock);
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 0370624..02e636a 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -841,6 +841,7 @@
case XADC_REG_VCCINT:
case XADC_REG_VCCAUX:
case XADC_REG_VREFP:
+ case XADC_REG_VREFN:
case XADC_REG_VCCBRAM:
case XADC_REG_VCCPINT:
case XADC_REG_VCCPAUX:
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index 9e4d2c18..81ca008 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -113,12 +113,16 @@
ID_AD5065,
ID_AD5628_1,
ID_AD5628_2,
+ ID_AD5629_1,
+ ID_AD5629_2,
ID_AD5648_1,
ID_AD5648_2,
ID_AD5666_1,
ID_AD5666_2,
ID_AD5668_1,
ID_AD5668_2,
+ ID_AD5669_1,
+ ID_AD5669_2,
};
static int ad5064_write(struct ad5064_state *st, unsigned int cmd,
@@ -291,7 +295,7 @@
{ },
};
-#define AD5064_CHANNEL(chan, addr, bits) { \
+#define AD5064_CHANNEL(chan, addr, bits, _shift) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
@@ -303,36 +307,39 @@
.sign = 'u', \
.realbits = (bits), \
.storagebits = 16, \
- .shift = 20 - bits, \
+ .shift = (_shift), \
}, \
.ext_info = ad5064_ext_info, \
}
-#define DECLARE_AD5064_CHANNELS(name, bits) \
+#define DECLARE_AD5064_CHANNELS(name, bits, shift) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, 0, bits), \
- AD5064_CHANNEL(1, 1, bits), \
- AD5064_CHANNEL(2, 2, bits), \
- AD5064_CHANNEL(3, 3, bits), \
- AD5064_CHANNEL(4, 4, bits), \
- AD5064_CHANNEL(5, 5, bits), \
- AD5064_CHANNEL(6, 6, bits), \
- AD5064_CHANNEL(7, 7, bits), \
+ AD5064_CHANNEL(0, 0, bits, shift), \
+ AD5064_CHANNEL(1, 1, bits, shift), \
+ AD5064_CHANNEL(2, 2, bits, shift), \
+ AD5064_CHANNEL(3, 3, bits, shift), \
+ AD5064_CHANNEL(4, 4, bits, shift), \
+ AD5064_CHANNEL(5, 5, bits, shift), \
+ AD5064_CHANNEL(6, 6, bits, shift), \
+ AD5064_CHANNEL(7, 7, bits, shift), \
}
-#define DECLARE_AD5065_CHANNELS(name, bits) \
+#define DECLARE_AD5065_CHANNELS(name, bits, shift) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, 0, bits), \
- AD5064_CHANNEL(1, 3, bits), \
+ AD5064_CHANNEL(0, 0, bits, shift), \
+ AD5064_CHANNEL(1, 3, bits, shift), \
}
-static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
-static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
-static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
+static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8);
+static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6);
+static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4);
-static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
-static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
-static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4);
+
+static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4);
+static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0);
static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
[ID_AD5024] = {
@@ -382,6 +389,18 @@
.channels = ad5024_channels,
.num_channels = 8,
},
+ [ID_AD5629_1] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ad5629_channels,
+ .num_channels = 8,
+ },
+ [ID_AD5629_2] = {
+ .shared_vref = true,
+ .internal_vref = 5000000,
+ .channels = ad5629_channels,
+ .num_channels = 8,
+ },
[ID_AD5648_1] = {
.shared_vref = true,
.internal_vref = 2500000,
@@ -418,6 +437,18 @@
.channels = ad5064_channels,
.num_channels = 8,
},
+ [ID_AD5669_1] = {
+ .shared_vref = true,
+ .internal_vref = 2500000,
+ .channels = ad5669_channels,
+ .num_channels = 8,
+ },
+ [ID_AD5669_2] = {
+ .shared_vref = true,
+ .internal_vref = 5000000,
+ .channels = ad5669_channels,
+ .num_channels = 8,
+ },
};
static inline unsigned int ad5064_num_vref(struct ad5064_state *st)
@@ -597,10 +628,16 @@
unsigned int addr, unsigned int val)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
+ int ret;
st->data.i2c[0] = (cmd << 4) | addr;
put_unaligned_be16(val, &st->data.i2c[1]);
- return i2c_master_send(i2c, st->data.i2c, 3);
+
+ ret = i2c_master_send(i2c, st->data.i2c, 3);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static int ad5064_i2c_probe(struct i2c_client *i2c,
@@ -616,12 +653,12 @@
}
static const struct i2c_device_id ad5064_i2c_ids[] = {
- {"ad5629-1", ID_AD5628_1},
- {"ad5629-2", ID_AD5628_2},
- {"ad5629-3", ID_AD5628_2}, /* similar enough to ad5629-2 */
- {"ad5669-1", ID_AD5668_1},
- {"ad5669-2", ID_AD5668_2},
- {"ad5669-3", ID_AD5668_2}, /* similar enough to ad5669-2 */
+ {"ad5629-1", ID_AD5629_1},
+ {"ad5629-2", ID_AD5629_2},
+ {"ad5629-3", ID_AD5629_2}, /* similar enough to ad5629-2 */
+ {"ad5669-1", ID_AD5669_1},
+ {"ad5669-2", ID_AD5669_2},
+ {"ad5669-3", ID_AD5669_2}, /* similar enough to ad5669-2 */
{}
};
MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids);
diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index 12128d1..71991b5 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -50,10 +50,10 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- ret = i2c_smbus_read_word_data(*client,
- chan->type == IIO_TEMP ?
- SI7020CMD_TEMP_HOLD :
- SI7020CMD_RH_HOLD);
+ ret = i2c_smbus_read_word_swapped(*client,
+ chan->type == IIO_TEMP ?
+ SI7020CMD_TEMP_HOLD :
+ SI7020CMD_RH_HOLD);
if (ret < 0)
return ret;
*val = ret >> 2;
diff --git a/drivers/iommu/s390-iommu.c b/drivers/iommu/s390-iommu.c
index cbe198c..471ee36b 100644
--- a/drivers/iommu/s390-iommu.c
+++ b/drivers/iommu/s390-iommu.c
@@ -216,6 +216,7 @@
u8 *page_addr = (u8 *) (pa & PAGE_MASK);
dma_addr_t start_dma_addr = dma_addr;
unsigned long irq_flags, nr_pages, i;
+ unsigned long *entry;
int rc = 0;
if (dma_addr < s390_domain->domain.geometry.aperture_start ||
@@ -228,8 +229,12 @@
spin_lock_irqsave(&s390_domain->dma_table_lock, irq_flags);
for (i = 0; i < nr_pages; i++) {
- dma_update_cpu_trans(s390_domain->dma_table, page_addr,
- dma_addr, flags);
+ entry = dma_walk_cpu_trans(s390_domain->dma_table, dma_addr);
+ if (!entry) {
+ rc = -ENOMEM;
+ goto undo_cpu_trans;
+ }
+ dma_update_cpu_trans(entry, page_addr, flags);
page_addr += PAGE_SIZE;
dma_addr += PAGE_SIZE;
}
@@ -242,6 +247,20 @@
break;
}
spin_unlock(&s390_domain->list_lock);
+
+undo_cpu_trans:
+ if (rc && ((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID)) {
+ flags = ZPCI_PTE_INVALID;
+ while (i-- > 0) {
+ page_addr -= PAGE_SIZE;
+ dma_addr -= PAGE_SIZE;
+ entry = dma_walk_cpu_trans(s390_domain->dma_table,
+ dma_addr);
+ if (!entry)
+ break;
+ dma_update_cpu_trans(entry, page_addr, flags);
+ }
+ }
spin_unlock_irqrestore(&s390_domain->dma_table_lock, irq_flags);
return rc;
diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index 44a077f..f174ce0 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -84,12 +84,15 @@
writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i);
/*
- * Disable all interrupts. Leave the PPI and SGIs alone
- * as they are enabled by redistributor registers.
+ * Deactivate and disable all SPIs. Leave the PPI and SGIs
+ * alone as they are in the redistributor registers on GICv3.
*/
- for (i = 32; i < gic_irqs; i += 32)
+ for (i = 32; i < gic_irqs; i += 32) {
writel_relaxed(GICD_INT_EN_CLR_X32,
- base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ base + GIC_DIST_ENABLE_CLEAR + i / 8);
+ }
if (sync_access)
sync_access();
@@ -102,7 +105,9 @@
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
+ * Make sure everything is deactivated.
*/
+ writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 515c823..abf2ffa 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -73,9 +73,11 @@
union gic_base cpu_base;
#ifdef CONFIG_CPU_PM
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_active;
u32 __percpu *saved_ppi_conf;
#endif
struct irq_domain *domain;
@@ -566,6 +568,10 @@
for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
gic_data[gic_nr].saved_spi_enable[i] =
readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_active[i] =
+ readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
}
/*
@@ -604,9 +610,19 @@
writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
dist_base + GIC_DIST_TARGET + i * 4);
- for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ }
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
+ writel_relaxed(gic_data[gic_nr].saved_spi_active[i],
+ dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+ }
writel_relaxed(GICD_ENABLE, dist_base + GIC_DIST_CTRL);
}
@@ -631,6 +647,10 @@
for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
@@ -654,8 +674,18 @@
return;
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
- for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ENABLE_CLEAR + i * 4);
writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+ }
+
+ ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_active);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++) {
+ writel_relaxed(GICD_INT_EN_CLR_X32,
+ dist_base + GIC_DIST_ACTIVE_CLEAR + i * 4);
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ACTIVE_SET + i * 4);
+ }
ptr = raw_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
@@ -710,6 +740,10 @@
sizeof(u32));
BUG_ON(!gic->saved_ppi_enable);
+ gic->saved_ppi_active = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_active);
+
gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
sizeof(u32));
BUG_ON(!gic->saved_ppi_conf);
diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index f659e60..5178645 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -160,11 +160,6 @@
}
EXPORT_SYMBOL(nvm_erase_blk);
-static void nvm_core_free(struct nvm_dev *dev)
-{
- kfree(dev);
-}
-
static int nvm_core_init(struct nvm_dev *dev)
{
struct nvm_id *id = &dev->identity;
@@ -179,12 +174,21 @@
dev->sec_size = grp->csecs;
dev->oob_size = grp->sos;
dev->sec_per_pg = grp->fpg_sz / grp->csecs;
- dev->addr_mode = id->ppat;
- dev->addr_format = id->ppaf;
+ memcpy(&dev->ppaf, &id->ppaf, sizeof(struct nvm_addr_format));
dev->plane_mode = NVM_PLANE_SINGLE;
dev->max_rq_size = dev->ops->max_phys_sect * dev->sec_size;
+ if (grp->mtype != 0) {
+ pr_err("nvm: memory type not supported\n");
+ return -EINVAL;
+ }
+
+ if (grp->fmtype != 0 && grp->fmtype != 1) {
+ pr_err("nvm: flash type not supported\n");
+ return -EINVAL;
+ }
+
if (grp->mpos & 0x020202)
dev->plane_mode = NVM_PLANE_DOUBLE;
if (grp->mpos & 0x040404)
@@ -213,21 +217,18 @@
if (dev->mt)
dev->mt->unregister_mgr(dev);
-
- nvm_core_free(dev);
}
static int nvm_init(struct nvm_dev *dev)
{
struct nvmm_type *mt;
- int ret = 0;
+ int ret = -EINVAL;
if (!dev->q || !dev->ops)
- return -EINVAL;
+ return ret;
if (dev->ops->identity(dev->q, &dev->identity)) {
pr_err("nvm: device could not be identified\n");
- ret = -EINVAL;
goto err;
}
@@ -273,7 +274,6 @@
dev->nr_chnls);
return 0;
err:
- nvm_free(dev);
pr_err("nvm: failed to initialize nvm\n");
return ret;
}
@@ -308,22 +308,24 @@
if (ret)
goto err_init;
- down_write(&nvm_lock);
- list_add(&dev->devices, &nvm_devices);
- up_write(&nvm_lock);
-
if (dev->ops->max_phys_sect > 1) {
dev->ppalist_pool = dev->ops->create_dma_pool(dev->q,
"ppalist");
if (!dev->ppalist_pool) {
pr_err("nvm: could not create ppa pool\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_init;
}
} else if (dev->ops->max_phys_sect > 256) {
pr_info("nvm: max sectors supported is 256.\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_init;
}
+ down_write(&nvm_lock);
+ list_add(&dev->devices, &nvm_devices);
+ up_write(&nvm_lock);
+
return 0;
err_init:
kfree(dev);
@@ -341,11 +343,12 @@
return;
}
- nvm_exit(dev);
-
down_write(&nvm_lock);
list_del(&dev->devices);
up_write(&nvm_lock);
+
+ nvm_exit(dev);
+ kfree(dev);
}
EXPORT_SYMBOL(nvm_unregister);
@@ -457,11 +460,11 @@
lockdep_assert_held(&nvm_lock);
del_gendisk(tdisk);
+ blk_cleanup_queue(q);
+
if (tt->exit)
tt->exit(tdisk->private_data);
- blk_cleanup_queue(q);
-
put_disk(tdisk);
list_del(&t->list);
@@ -541,7 +544,7 @@
if (!dev->mt)
return 0;
- dev->mt->free_blocks_print(dev);
+ dev->mt->lun_info_print(dev);
return 0;
}
diff --git a/drivers/lightnvm/gennvm.c b/drivers/lightnvm/gennvm.c
index ae1fb2b..e20e74e 100644
--- a/drivers/lightnvm/gennvm.c
+++ b/drivers/lightnvm/gennvm.c
@@ -60,23 +60,28 @@
lun->vlun.lun_id = i % dev->luns_per_chnl;
lun->vlun.chnl_id = i / dev->luns_per_chnl;
lun->vlun.nr_free_blocks = dev->blks_per_lun;
+ lun->vlun.nr_inuse_blocks = 0;
+ lun->vlun.nr_bad_blocks = 0;
}
return 0;
}
-static int gennvm_block_bb(u32 lun_id, void *bb_bitmap, unsigned int nr_blocks,
+static int gennvm_block_bb(struct ppa_addr ppa, int nr_blocks, u8 *blks,
void *private)
{
struct gen_nvm *gn = private;
- struct gen_lun *lun = &gn->luns[lun_id];
+ struct nvm_dev *dev = gn->dev;
+ struct gen_lun *lun;
struct nvm_block *blk;
int i;
- if (unlikely(bitmap_empty(bb_bitmap, nr_blocks)))
- return 0;
+ ppa = dev_to_generic_addr(gn->dev, ppa);
+ lun = &gn->luns[(dev->nr_luns * ppa.g.ch) + ppa.g.lun];
- i = -1;
- while ((i = find_next_bit(bb_bitmap, nr_blocks, i + 1)) < nr_blocks) {
+ for (i = 0; i < nr_blocks; i++) {
+ if (blks[i] == 0)
+ continue;
+
blk = &lun->vlun.blocks[i];
if (!blk) {
pr_err("gennvm: BB data is out of bounds.\n");
@@ -84,6 +89,7 @@
}
list_move_tail(&blk->list, &lun->bb_list);
+ lun->vlun.nr_bad_blocks++;
}
return 0;
@@ -136,6 +142,7 @@
list_move_tail(&blk->list, &lun->used_list);
blk->type = 1;
lun->vlun.nr_free_blocks--;
+ lun->vlun.nr_inuse_blocks++;
}
}
@@ -164,15 +171,25 @@
block->id = cur_block_id++;
/* First block is reserved for device */
- if (unlikely(lun_iter == 0 && blk_iter == 0))
+ if (unlikely(lun_iter == 0 && blk_iter == 0)) {
+ lun->vlun.nr_free_blocks--;
continue;
+ }
list_add_tail(&block->list, &lun->free_list);
}
if (dev->ops->get_bb_tbl) {
- ret = dev->ops->get_bb_tbl(dev->q, lun->vlun.id,
- dev->blks_per_lun, gennvm_block_bb, gn);
+ struct ppa_addr ppa;
+
+ ppa.ppa = 0;
+ ppa.g.ch = lun->vlun.chnl_id;
+ ppa.g.lun = lun->vlun.id;
+ ppa = generic_to_dev_addr(dev, ppa);
+
+ ret = dev->ops->get_bb_tbl(dev->q, ppa,
+ dev->blks_per_lun,
+ gennvm_block_bb, gn);
if (ret)
pr_err("gennvm: could not read BB table\n");
}
@@ -199,6 +216,7 @@
if (!gn)
return -ENOMEM;
+ gn->dev = dev;
gn->nr_luns = dev->nr_luns;
dev->mp = gn;
@@ -254,6 +272,7 @@
blk->type = 1;
lun->vlun.nr_free_blocks--;
+ lun->vlun.nr_inuse_blocks++;
spin_unlock(&vlun->lock);
out:
@@ -271,16 +290,21 @@
case 1:
list_move_tail(&blk->list, &lun->free_list);
lun->vlun.nr_free_blocks++;
+ lun->vlun.nr_inuse_blocks--;
blk->type = 0;
break;
case 2:
list_move_tail(&blk->list, &lun->bb_list);
+ lun->vlun.nr_bad_blocks++;
+ lun->vlun.nr_inuse_blocks--;
break;
default:
WARN_ON_ONCE(1);
pr_err("gennvm: erroneous block type (%lu -> %u)\n",
blk->id, blk->type);
list_move_tail(&blk->list, &lun->bb_list);
+ lun->vlun.nr_bad_blocks++;
+ lun->vlun.nr_inuse_blocks--;
}
spin_unlock(&vlun->lock);
@@ -292,10 +316,10 @@
if (rqd->nr_pages > 1) {
for (i = 0; i < rqd->nr_pages; i++)
- rqd->ppa_list[i] = addr_to_generic_mode(dev,
+ rqd->ppa_list[i] = dev_to_generic_addr(dev,
rqd->ppa_list[i]);
} else {
- rqd->ppa_addr = addr_to_generic_mode(dev, rqd->ppa_addr);
+ rqd->ppa_addr = dev_to_generic_addr(dev, rqd->ppa_addr);
}
}
@@ -305,10 +329,10 @@
if (rqd->nr_pages > 1) {
for (i = 0; i < rqd->nr_pages; i++)
- rqd->ppa_list[i] = generic_to_addr_mode(dev,
+ rqd->ppa_list[i] = generic_to_dev_addr(dev,
rqd->ppa_list[i]);
} else {
- rqd->ppa_addr = generic_to_addr_mode(dev, rqd->ppa_addr);
+ rqd->ppa_addr = generic_to_dev_addr(dev, rqd->ppa_addr);
}
}
@@ -354,10 +378,10 @@
{
int i;
- if (!dev->ops->set_bb)
+ if (!dev->ops->set_bb_tbl)
return;
- if (dev->ops->set_bb(dev->q, rqd, 1))
+ if (dev->ops->set_bb_tbl(dev->q, rqd, 1))
return;
gennvm_addr_to_generic_mode(dev, rqd);
@@ -440,15 +464,24 @@
return &gn->luns[lunid].vlun;
}
-static void gennvm_free_blocks_print(struct nvm_dev *dev)
+static void gennvm_lun_info_print(struct nvm_dev *dev)
{
struct gen_nvm *gn = dev->mp;
struct gen_lun *lun;
unsigned int i;
- gennvm_for_each_lun(gn, lun, i)
- pr_info("%s: lun%8u\t%u\n",
- dev->name, i, lun->vlun.nr_free_blocks);
+
+ gennvm_for_each_lun(gn, lun, i) {
+ spin_lock(&lun->vlun.lock);
+
+ pr_info("%s: lun%8u\t%u\t%u\t%u\n",
+ dev->name, i,
+ lun->vlun.nr_free_blocks,
+ lun->vlun.nr_inuse_blocks,
+ lun->vlun.nr_bad_blocks);
+
+ spin_unlock(&lun->vlun.lock);
+ }
}
static struct nvmm_type gennvm = {
@@ -466,7 +499,7 @@
.erase_blk = gennvm_erase_blk,
.get_lun = gennvm_get_lun,
- .free_blocks_print = gennvm_free_blocks_print,
+ .lun_info_print = gennvm_lun_info_print,
};
static int __init gennvm_module_init(void)
diff --git a/drivers/lightnvm/gennvm.h b/drivers/lightnvm/gennvm.h
index d23bd35..9c24b5b 100644
--- a/drivers/lightnvm/gennvm.h
+++ b/drivers/lightnvm/gennvm.h
@@ -35,6 +35,8 @@
};
struct gen_nvm {
+ struct nvm_dev *dev;
+
int nr_luns;
struct gen_lun *luns;
};
diff --git a/drivers/lightnvm/rrpc.c b/drivers/lightnvm/rrpc.c
index 7ba64c8..75e59c3 100644
--- a/drivers/lightnvm/rrpc.c
+++ b/drivers/lightnvm/rrpc.c
@@ -123,12 +123,42 @@
return blk->id * rrpc->dev->pgs_per_blk;
}
+static struct ppa_addr linear_to_generic_addr(struct nvm_dev *dev,
+ struct ppa_addr r)
+{
+ struct ppa_addr l;
+ int secs, pgs, blks, luns;
+ sector_t ppa = r.ppa;
+
+ l.ppa = 0;
+
+ div_u64_rem(ppa, dev->sec_per_pg, &secs);
+ l.g.sec = secs;
+
+ sector_div(ppa, dev->sec_per_pg);
+ div_u64_rem(ppa, dev->sec_per_blk, &pgs);
+ l.g.pg = pgs;
+
+ sector_div(ppa, dev->pgs_per_blk);
+ div_u64_rem(ppa, dev->blks_per_lun, &blks);
+ l.g.blk = blks;
+
+ sector_div(ppa, dev->blks_per_lun);
+ div_u64_rem(ppa, dev->luns_per_chnl, &luns);
+ l.g.lun = luns;
+
+ sector_div(ppa, dev->luns_per_chnl);
+ l.g.ch = ppa;
+
+ return l;
+}
+
static struct ppa_addr rrpc_ppa_to_gaddr(struct nvm_dev *dev, u64 addr)
{
struct ppa_addr paddr;
paddr.ppa = addr;
- return __linear_to_generic_addr(dev, paddr);
+ return linear_to_generic_addr(dev, paddr);
}
/* requires lun->lock taken */
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 917d47e..3147c8d 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -112,7 +112,8 @@
* and encrypts / decrypts at the same time.
*/
enum flags { DM_CRYPT_SUSPENDED, DM_CRYPT_KEY_VALID,
- DM_CRYPT_SAME_CPU, DM_CRYPT_NO_OFFLOAD };
+ DM_CRYPT_SAME_CPU, DM_CRYPT_NO_OFFLOAD,
+ DM_CRYPT_EXIT_THREAD};
/*
* The fields in here must be read only after initialization.
@@ -1203,20 +1204,18 @@
if (!RB_EMPTY_ROOT(&cc->write_tree))
goto pop_from_list;
+ if (unlikely(test_bit(DM_CRYPT_EXIT_THREAD, &cc->flags))) {
+ spin_unlock_irq(&cc->write_thread_wait.lock);
+ break;
+ }
+
__set_current_state(TASK_INTERRUPTIBLE);
__add_wait_queue(&cc->write_thread_wait, &wait);
spin_unlock_irq(&cc->write_thread_wait.lock);
- if (unlikely(kthread_should_stop())) {
- set_task_state(current, TASK_RUNNING);
- remove_wait_queue(&cc->write_thread_wait, &wait);
- break;
- }
-
schedule();
- set_task_state(current, TASK_RUNNING);
spin_lock_irq(&cc->write_thread_wait.lock);
__remove_wait_queue(&cc->write_thread_wait, &wait);
goto continue_locked;
@@ -1531,8 +1530,13 @@
if (!cc)
return;
- if (cc->write_thread)
+ if (cc->write_thread) {
+ spin_lock_irq(&cc->write_thread_wait.lock);
+ set_bit(DM_CRYPT_EXIT_THREAD, &cc->flags);
+ wake_up_locked(&cc->write_thread_wait);
+ spin_unlock_irq(&cc->write_thread_wait.lock);
kthread_stop(cc->write_thread);
+ }
if (cc->io_queue)
destroy_workqueue(cc->io_queue);
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index aaa6caa..cfa29f5 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1537,32 +1537,34 @@
struct block_device **bdev, fmode_t *mode)
{
struct multipath *m = ti->private;
- struct pgpath *pgpath;
unsigned long flags;
int r;
- r = 0;
-
spin_lock_irqsave(&m->lock, flags);
if (!m->current_pgpath)
__choose_pgpath(m, 0);
- pgpath = m->current_pgpath;
-
- if (pgpath) {
- *bdev = pgpath->path.dev->bdev;
- *mode = pgpath->path.dev->mode;
+ if (m->current_pgpath) {
+ if (!m->queue_io) {
+ *bdev = m->current_pgpath->path.dev->bdev;
+ *mode = m->current_pgpath->path.dev->mode;
+ r = 0;
+ } else {
+ /* pg_init has not started or completed */
+ r = -ENOTCONN;
+ }
+ } else {
+ /* No path is available */
+ if (m->queue_if_no_path)
+ r = -ENOTCONN;
+ else
+ r = -EIO;
}
- if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path))
- r = -ENOTCONN;
- else if (!*bdev)
- r = -EIO;
-
spin_unlock_irqrestore(&m->lock, flags);
- if (r == -ENOTCONN && !fatal_signal_pending(current)) {
+ if (r == -ENOTCONN) {
spin_lock_irqsave(&m->lock, flags);
if (!m->current_pg) {
/* Path status changed, redo selection */
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 3897b90..63903a5 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2432,6 +2432,7 @@
case PM_WRITE:
if (old_mode != new_mode)
notify_of_pool_mode_change(pool, "write");
+ pool->pf.error_if_no_space = pt->requested_pf.error_if_no_space;
dm_pool_metadata_read_write(pool->pmd);
pool->process_bio = process_bio;
pool->process_discard = process_discard_bio;
@@ -4249,10 +4250,9 @@
{
struct thin_c *tc = ti->private;
struct pool *pool = tc->pool;
- struct queue_limits *pool_limits = dm_get_queue_limits(pool->pool_md);
- if (!pool_limits->discard_granularity)
- return; /* pool's discard support is disabled */
+ if (!pool->pf.discard_enabled)
+ return;
limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT;
limits->max_discard_sectors = 2048 * 1024 * 16; /* 16G */
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 6e15f35..5df4048 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -591,7 +591,7 @@
out:
dm_put_live_table(md, *srcu_idx);
- if (r == -ENOTCONN) {
+ if (r == -ENOTCONN && !fatal_signal_pending(current)) {
msleep(10);
goto retry;
}
@@ -603,9 +603,10 @@
{
struct mapped_device *md = bdev->bd_disk->private_data;
struct dm_target *tgt;
+ struct block_device *tgt_bdev = NULL;
int srcu_idx, r;
- r = dm_get_live_table_for_ioctl(md, &tgt, &bdev, &mode, &srcu_idx);
+ r = dm_get_live_table_for_ioctl(md, &tgt, &tgt_bdev, &mode, &srcu_idx);
if (r < 0)
return r;
@@ -620,7 +621,7 @@
goto out;
}
- r = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
+ r = __blkdev_driver_ioctl(tgt_bdev, mode, cmd, arg);
out:
dm_put_live_table(md, srcu_idx);
return r;
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
index 35759a9..e8f8472 100644
--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -1992,9 +1992,9 @@
(unsigned long long)pci_resource_start(pci_dev, 0));
pci_set_master(pci_dev);
- if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ err = pci_set_dma_mask(pci_dev, 0xffffffff);
+ if (err) {
printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
- err = -EIO;
goto fail_context;
}
diff --git a/drivers/media/pci/cx25821/cx25821-core.c b/drivers/media/pci/cx25821/cx25821-core.c
index dbc695f..0042803 100644
--- a/drivers/media/pci/cx25821/cx25821-core.c
+++ b/drivers/media/pci/cx25821/cx25821-core.c
@@ -1319,7 +1319,8 @@
dev->pci_lat, (unsigned long long)dev->base_io_addr);
pci_set_master(pci_dev);
- if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ err = pci_set_dma_mask(pci_dev, 0xffffffff);
+ if (err) {
pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
err = -EIO;
goto fail_irq;
diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c
index 0ed1b65..1b5268f 100644
--- a/drivers/media/pci/cx88/cx88-alsa.c
+++ b/drivers/media/pci/cx88/cx88-alsa.c
@@ -890,9 +890,9 @@
return err;
}
- if (!pci_set_dma_mask(pci,DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(pci,DMA_BIT_MASK(32));
+ if (err) {
dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n",core->name);
- err = -EIO;
cx88_core_put(core, pci);
return err;
}
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index 9db7767..f34c229 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -393,7 +393,8 @@
if (pci_enable_device(dev->pci))
return -EIO;
pci_set_master(dev->pci);
- if (!pci_set_dma_mask(dev->pci,DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(dev->pci,DMA_BIT_MASK(32));
+ if (err) {
printk("%s/2: Oops: no 32bit PCI DMA ???\n",dev->core->name);
return -EIO;
}
diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
index 0de1ad5..aef9acf 100644
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -1314,9 +1314,9 @@
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
pci_set_master(pci_dev);
- if (!pci_set_dma_mask(pci_dev,DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(pci_dev,DMA_BIT_MASK(32));
+ if (err) {
printk("%s/0: Oops: no 32bit PCI DMA ???\n",core->name);
- err = -EIO;
goto fail_core;
}
dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev);
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 60b2d46..3fdbd81 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -810,7 +810,7 @@
"%s(): board vendor 0x%x, revision 0x%x\n",
__func__, board_vendor, board_revision);
pci_set_master(pci_dev);
- if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ if (pci_set_dma_mask(pci_dev, 0xffffffff) < 0) {
dev_err(&pci_dev->dev,
"%s(): 32bit PCI DMA is not supported\n", __func__);
goto pci_detect_err;
diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
index e79d63e..f720cea 100644
--- a/drivers/media/pci/saa7134/saa7134-core.c
+++ b/drivers/media/pci/saa7134/saa7134-core.c
@@ -951,9 +951,9 @@
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
pci_set_master(pci_dev);
- if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
+ if (err) {
pr_warn("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
- err = -EIO;
goto fail1;
}
diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index 8f36b48..8bbd092 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -1264,9 +1264,9 @@
pci_set_master(pci_dev);
/* TODO */
- if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ err = pci_set_dma_mask(pci_dev, 0xffffffff);
+ if (err) {
printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
- err = -EIO;
goto fail_irq;
}
diff --git a/drivers/media/pci/tw68/tw68-core.c b/drivers/media/pci/tw68/tw68-core.c
index 8c5655d..4e77618 100644
--- a/drivers/media/pci/tw68/tw68-core.c
+++ b/drivers/media/pci/tw68/tw68-core.c
@@ -257,9 +257,9 @@
dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat, (u64)pci_resource_start(pci_dev, 0));
pci_set_master(pci_dev);
- if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
+ err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
+ if (err) {
pr_info("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
- err = -EIO;
goto fail1;
}
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 23b6c8e..d848616 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -65,8 +65,7 @@
#define MMC_SANITIZE_REQ_TIMEOUT 240000
#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
-#define mmc_req_rel_wr(req) (((req->cmd_flags & REQ_FUA) || \
- (req->cmd_flags & REQ_META)) && \
+#define mmc_req_rel_wr(req) ((req->cmd_flags & REQ_FUA) && \
(rq_data_dir(req) == WRITE))
#define PACKED_CMD_VER 0x01
#define PACKED_CMD_WR 0x02
@@ -1467,13 +1466,9 @@
/*
* Reliable writes are used to implement Forced Unit Access and
- * REQ_META accesses, and are supported only on MMCs.
- *
- * XXX: this really needs a good explanation of why REQ_META
- * is treated special.
+ * are supported only on MMCs.
*/
- bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
- (req->cmd_flags & REQ_META)) &&
+ bool do_rel_wr = (req->cmd_flags & REQ_FUA) &&
(rq_data_dir(req) == WRITE) &&
(md->flags & MMC_BLK_REL_WR);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c793fda..3a9a79e 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1040,71 +1040,6 @@
return err;
}
-static int mmc_select_hs400(struct mmc_card *card)
-{
- struct mmc_host *host = card->host;
- int err = 0;
- u8 val;
-
- /*
- * HS400 mode requires 8-bit bus width
- */
- if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 &&
- host->ios.bus_width == MMC_BUS_WIDTH_8))
- return 0;
-
- /*
- * Before switching to dual data rate operation for HS400,
- * it is required to convert from HS200 mode to HS mode.
- */
- mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
- mmc_set_bus_speed(card);
-
- val = EXT_CSD_TIMING_HS |
- card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
- err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, val,
- card->ext_csd.generic_cmd6_time,
- true, true, true);
- if (err) {
- pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
- mmc_hostname(host), err);
- return err;
- }
-
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BUS_WIDTH,
- EXT_CSD_DDR_BUS_WIDTH_8,
- card->ext_csd.generic_cmd6_time);
- if (err) {
- pr_err("%s: switch to bus width for hs400 failed, err:%d\n",
- mmc_hostname(host), err);
- return err;
- }
-
- val = EXT_CSD_TIMING_HS400 |
- card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
- err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, val,
- card->ext_csd.generic_cmd6_time,
- true, true, true);
- if (err) {
- pr_err("%s: switch to hs400 failed, err:%d\n",
- mmc_hostname(host), err);
- return err;
- }
-
- mmc_set_timing(host, MMC_TIMING_MMC_HS400);
- mmc_set_bus_speed(card);
-
- return 0;
-}
-
-int mmc_hs200_to_hs400(struct mmc_card *card)
-{
- return mmc_select_hs400(card);
-}
-
/* Caller must hold re-tuning */
static int mmc_switch_status(struct mmc_card *card)
{
@@ -1118,6 +1053,97 @@
return mmc_switch_status_error(card->host, status);
}
+static int mmc_select_hs400(struct mmc_card *card)
+{
+ struct mmc_host *host = card->host;
+ bool send_status = true;
+ unsigned int max_dtr;
+ int err = 0;
+ u8 val;
+
+ /*
+ * HS400 mode requires 8-bit bus width
+ */
+ if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 &&
+ host->ios.bus_width == MMC_BUS_WIDTH_8))
+ return 0;
+
+ if (host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ send_status = false;
+
+ /* Reduce frequency to HS frequency */
+ max_dtr = card->ext_csd.hs_max_dtr;
+ mmc_set_clock(host, max_dtr);
+
+ /* Switch card to HS mode */
+ val = EXT_CSD_TIMING_HS |
+ card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, val,
+ card->ext_csd.generic_cmd6_time,
+ true, send_status, true);
+ if (err) {
+ pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+
+ /* Set host controller to HS timing */
+ mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+
+ if (!send_status) {
+ err = mmc_switch_status(card);
+ if (err)
+ goto out_err;
+ }
+
+ /* Switch card to DDR */
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_BUS_WIDTH,
+ EXT_CSD_DDR_BUS_WIDTH_8,
+ card->ext_csd.generic_cmd6_time);
+ if (err) {
+ pr_err("%s: switch to bus width for hs400 failed, err:%d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+
+ /* Switch card to HS400 */
+ val = EXT_CSD_TIMING_HS400 |
+ card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, val,
+ card->ext_csd.generic_cmd6_time,
+ true, send_status, true);
+ if (err) {
+ pr_err("%s: switch to hs400 failed, err:%d\n",
+ mmc_hostname(host), err);
+ return err;
+ }
+
+ /* Set host controller to HS400 timing and frequency */
+ mmc_set_timing(host, MMC_TIMING_MMC_HS400);
+ mmc_set_bus_speed(card);
+
+ if (!send_status) {
+ err = mmc_switch_status(card);
+ if (err)
+ goto out_err;
+ }
+
+ return 0;
+
+out_err:
+ pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
+ __func__, err);
+ return err;
+}
+
+int mmc_hs200_to_hs400(struct mmc_card *card)
+{
+ return mmc_select_hs400(card);
+}
+
int mmc_hs400_to_hs200(struct mmc_card *card)
{
struct mmc_host *host = card->host;
@@ -1219,6 +1245,8 @@
static int mmc_select_hs200(struct mmc_card *card)
{
struct mmc_host *host = card->host;
+ bool send_status = true;
+ unsigned int old_timing;
int err = -EINVAL;
u8 val;
@@ -1234,6 +1262,9 @@
mmc_select_driver_type(card);
+ if (host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ send_status = false;
+
/*
* Set the bus width(4 or 8) with host's support and
* switch to HS200 mode if bus width is set successfully.
@@ -1245,11 +1276,25 @@
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, val,
card->ext_csd.generic_cmd6_time,
- true, true, true);
- if (!err)
- mmc_set_timing(host, MMC_TIMING_MMC_HS200);
+ true, send_status, true);
+ if (err)
+ goto err;
+ old_timing = host->ios.timing;
+ mmc_set_timing(host, MMC_TIMING_MMC_HS200);
+ if (!send_status) {
+ err = mmc_switch_status(card);
+ /*
+ * mmc_select_timing() assumes timing has not changed if
+ * it is a switch error.
+ */
+ if (err == -EBADMSG)
+ mmc_set_timing(host, old_timing);
+ }
}
err:
+ if (err)
+ pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
+ __func__, err);
return err;
}
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index af71de5..1dee533 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -473,6 +473,7 @@
config MMC_GOLDFISH
tristate "goldfish qemu Multimedia Card Interface support"
+ depends on HAS_DMA
depends on GOLDFISH || COMPILE_TEST
help
This selects the Goldfish Multimedia card Interface emulation
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 39568cc..33dfd7e 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1276,7 +1276,7 @@
int start = 0, len = 0;
int start_final = 0, len_final = 0;
u8 final_phase = 0xff;
- struct msdc_delay_phase delay_phase;
+ struct msdc_delay_phase delay_phase = { 0, };
if (delay == 0) {
dev_err(host->dev, "phase error: [map:%x]\n", delay);
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 8cadd74..ce08896 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -805,7 +805,7 @@
goto out;
} else {
mmc->caps |= host->pdata->gpio_card_ro_invert ?
- MMC_CAP2_RO_ACTIVE_HIGH : 0;
+ 0 : MMC_CAP2_RO_ACTIVE_HIGH;
}
if (gpio_is_valid(gpio_cd))
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index dc4e844..5a99a93 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
+#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_nand.h>
#define JZ_REG_NAND_CTRL 0x50
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index cc74142..ece544e 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3110,7 +3110,7 @@
*/
static void nand_shutdown(struct mtd_info *mtd)
{
- nand_get_device(mtd, FL_SHUTDOWN);
+ nand_get_device(mtd, FL_PM_SUSPENDED);
}
/* Set default functions */
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 9093577..0527f48 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -15,9 +15,7 @@
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <net/dsa.h>
-
-#define REG_PORT(p) (8 + (p))
-#define REG_GLOBAL 0x0f
+#include "mv88e6060.h"
static int reg_read(struct dsa_switch *ds, int addr, int reg)
{
@@ -67,13 +65,14 @@
if (bus == NULL)
return NULL;
- ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
+ ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
if (ret >= 0) {
- if (ret == 0x0600)
+ if (ret == PORT_SWITCH_ID_6060)
return "Marvell 88E6060 (A0)";
- if (ret == 0x0601 || ret == 0x0602)
+ if (ret == PORT_SWITCH_ID_6060_R1 ||
+ ret == PORT_SWITCH_ID_6060_R2)
return "Marvell 88E6060 (B0)";
- if ((ret & 0xfff0) == 0x0600)
+ if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
return "Marvell 88E6060";
}
@@ -87,22 +86,26 @@
unsigned long timeout;
/* Set all ports to the disabled state. */
- for (i = 0; i < 6; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ for (i = 0; i < MV88E6060_PORTS; i++) {
+ ret = REG_READ(REG_PORT(i), PORT_CONTROL);
+ REG_WRITE(REG_PORT(i), PORT_CONTROL,
+ ret & ~PORT_CONTROL_STATE_MASK);
}
/* Wait for transmit queues to drain. */
usleep_range(2000, 4000);
/* Reset the switch. */
- REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+ REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
+ GLOBAL_ATU_CONTROL_SWRESET |
+ GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
+ GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
/* Wait up to one second for reset to complete. */
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0x8000) == 0x0000)
+ ret = REG_READ(REG_GLOBAL, GLOBAL_STATUS);
+ if (ret & GLOBAL_STATUS_INIT_READY)
break;
usleep_range(1000, 2000);
@@ -119,13 +122,15 @@
* set the maximum frame size to 1536 bytes, and mask all
* interrupt sources.
*/
- REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, GLOBAL_CONTROL_MAX_FRAME_1536);
/* Enable automatic address learning, set the address
* database size to 1024 entries, and set the default aging
* time to 5 minutes.
*/
- REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+ REG_WRITE(REG_GLOBAL, GLOBAL_ATU_CONTROL,
+ GLOBAL_ATU_CONTROL_ATUSIZE_1024 |
+ GLOBAL_ATU_CONTROL_ATE_AGE_5MIN);
return 0;
}
@@ -139,25 +144,30 @@
* state to Forwarding. Additionally, if this is the CPU
* port, enable Ingress and Egress Trailer tagging mode.
*/
- REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
+ REG_WRITE(addr, PORT_CONTROL,
+ dsa_is_cpu_port(ds, p) ?
+ PORT_CONTROL_TRAILER |
+ PORT_CONTROL_INGRESS_MODE |
+ PORT_CONTROL_STATE_FORWARDING :
+ PORT_CONTROL_STATE_FORWARDING);
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the CPU port.
*/
- REG_WRITE(addr, 0x06,
- ((p & 0xf) << 12) |
- (dsa_is_cpu_port(ds, p) ?
- ds->phys_port_mask :
- (1 << ds->dst->cpu_port)));
+ REG_WRITE(addr, PORT_VLAN_MAP,
+ ((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
+ (dsa_is_cpu_port(ds, p) ?
+ ds->phys_port_mask :
+ BIT(ds->dst->cpu_port)));
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
- REG_WRITE(addr, 0x0b, 1 << p);
+ REG_WRITE(addr, PORT_ASSOC_VECTOR, BIT(p));
return 0;
}
@@ -177,7 +187,7 @@
if (ret < 0)
return ret;
- for (i = 0; i < 6; i++) {
+ for (i = 0; i < MV88E6060_PORTS; i++) {
ret = mv88e6060_setup_port(ds, i);
if (ret < 0)
return ret;
@@ -188,16 +198,17 @@
static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
{
- REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
- REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
- REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+ /* Use the same MAC Address as FD Pause frames for all ports */
+ REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]);
+ REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]);
+ REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);
return 0;
}
static int mv88e6060_port_to_phy_addr(int port)
{
- if (port >= 0 && port <= 5)
+ if (port >= 0 && port < MV88E6060_PORTS)
return port;
return -1;
}
@@ -225,54 +236,6 @@
return reg_write(ds, addr, regnum, val);
}
-static void mv88e6060_poll_link(struct dsa_switch *ds)
-{
- int i;
-
- for (i = 0; i < DSA_MAX_PORTS; i++) {
- struct net_device *dev;
- int uninitialized_var(port_status);
- int link;
- int speed;
- int duplex;
- int fc;
-
- dev = ds->ports[i];
- if (dev == NULL)
- continue;
-
- link = 0;
- if (dev->flags & IFF_UP) {
- port_status = reg_read(ds, REG_PORT(i), 0x00);
- if (port_status < 0)
- continue;
-
- link = !!(port_status & 0x1000);
- }
-
- if (!link) {
- if (netif_carrier_ok(dev)) {
- netdev_info(dev, "link down\n");
- netif_carrier_off(dev);
- }
- continue;
- }
-
- speed = (port_status & 0x0100) ? 100 : 10;
- duplex = (port_status & 0x0200) ? 1 : 0;
- fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
-
- if (!netif_carrier_ok(dev)) {
- netdev_info(dev,
- "link up, %d Mb/s, %s duplex, flow control %sabled\n",
- speed,
- duplex ? "full" : "half",
- fc ? "en" : "dis");
- netif_carrier_on(dev);
- }
- }
-}
-
static struct dsa_switch_driver mv88e6060_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_TRAILER,
.probe = mv88e6060_probe,
@@ -280,7 +243,6 @@
.set_addr = mv88e6060_set_addr,
.phy_read = mv88e6060_phy_read,
.phy_write = mv88e6060_phy_write,
- .poll_link = mv88e6060_poll_link,
};
static int __init mv88e6060_init(void)
diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h
new file mode 100644
index 0000000..cc9b2ed
--- /dev/null
+++ b/drivers/net/dsa/mv88e6060.h
@@ -0,0 +1,111 @@
+/*
+ * drivers/net/dsa/mv88e6060.h - Marvell 88e6060 switch chip support
+ * Copyright (c) 2015 Neil Armstrong
+ *
+ * Based on mv88e6xxx.h
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MV88E6060_H
+#define __MV88E6060_H
+
+#define MV88E6060_PORTS 6
+
+#define REG_PORT(p) (0x8 + (p))
+#define PORT_STATUS 0x00
+#define PORT_STATUS_PAUSE_EN BIT(15)
+#define PORT_STATUS_MY_PAUSE BIT(14)
+#define PORT_STATUS_FC (PORT_STATUS_MY_PAUSE | PORT_STATUS_PAUSE_EN)
+#define PORT_STATUS_RESOLVED BIT(13)
+#define PORT_STATUS_LINK BIT(12)
+#define PORT_STATUS_PORTMODE BIT(11)
+#define PORT_STATUS_PHYMODE BIT(10)
+#define PORT_STATUS_DUPLEX BIT(9)
+#define PORT_STATUS_SPEED BIT(8)
+#define PORT_SWITCH_ID 0x03
+#define PORT_SWITCH_ID_6060 0x0600
+#define PORT_SWITCH_ID_6060_MASK 0xfff0
+#define PORT_SWITCH_ID_6060_R1 0x0601
+#define PORT_SWITCH_ID_6060_R2 0x0602
+#define PORT_CONTROL 0x04
+#define PORT_CONTROL_FORCE_FLOW_CTRL BIT(15)
+#define PORT_CONTROL_TRAILER BIT(14)
+#define PORT_CONTROL_HEADER BIT(11)
+#define PORT_CONTROL_INGRESS_MODE BIT(8)
+#define PORT_CONTROL_VLAN_TUNNEL BIT(7)
+#define PORT_CONTROL_STATE_MASK 0x03
+#define PORT_CONTROL_STATE_DISABLED 0x00
+#define PORT_CONTROL_STATE_BLOCKING 0x01
+#define PORT_CONTROL_STATE_LEARNING 0x02
+#define PORT_CONTROL_STATE_FORWARDING 0x03
+#define PORT_VLAN_MAP 0x06
+#define PORT_VLAN_MAP_DBNUM_SHIFT 12
+#define PORT_VLAN_MAP_TABLE_MASK 0x1f
+#define PORT_ASSOC_VECTOR 0x0b
+#define PORT_ASSOC_VECTOR_MONITOR BIT(15)
+#define PORT_ASSOC_VECTOR_PAV_MASK 0x1f
+#define PORT_RX_CNTR 0x10
+#define PORT_TX_CNTR 0x11
+
+#define REG_GLOBAL 0x0f
+#define GLOBAL_STATUS 0x00
+#define GLOBAL_STATUS_SW_MODE_MASK (0x3 << 12)
+#define GLOBAL_STATUS_SW_MODE_0 (0x0 << 12)
+#define GLOBAL_STATUS_SW_MODE_1 (0x1 << 12)
+#define GLOBAL_STATUS_SW_MODE_2 (0x2 << 12)
+#define GLOBAL_STATUS_SW_MODE_3 (0x3 << 12)
+#define GLOBAL_STATUS_INIT_READY BIT(11)
+#define GLOBAL_STATUS_ATU_FULL BIT(3)
+#define GLOBAL_STATUS_ATU_DONE BIT(2)
+#define GLOBAL_STATUS_PHY_INT BIT(1)
+#define GLOBAL_STATUS_EEINT BIT(0)
+#define GLOBAL_MAC_01 0x01
+#define GLOBAL_MAC_01_DIFF_ADDR BIT(8)
+#define GLOBAL_MAC_23 0x02
+#define GLOBAL_MAC_45 0x03
+#define GLOBAL_CONTROL 0x04
+#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13)
+#define GLOBAL_CONTROL_MAX_FRAME_1536 BIT(10)
+#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9)
+#define GLOBAL_CONTROL_CTRMODE BIT(8)
+#define GLOBAL_CONTROL_ATU_FULL_EN BIT(3)
+#define GLOBAL_CONTROL_ATU_DONE_EN BIT(2)
+#define GLOBAL_CONTROL_PHYINT_EN BIT(1)
+#define GLOBAL_CONTROL_EEPROM_DONE_EN BIT(0)
+#define GLOBAL_ATU_CONTROL 0x0a
+#define GLOBAL_ATU_CONTROL_SWRESET BIT(15)
+#define GLOBAL_ATU_CONTROL_LEARNDIS BIT(14)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_256 (0x0 << 12)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_512 (0x1 << 12)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_1024 (0x2 << 12)
+#define GLOBAL_ATU_CONTROL_ATE_AGE_SHIFT 4
+#define GLOBAL_ATU_CONTROL_ATE_AGE_MASK (0xff << 4)
+#define GLOBAL_ATU_CONTROL_ATE_AGE_5MIN (0x13 << 4)
+#define GLOBAL_ATU_OP 0x0b
+#define GLOBAL_ATU_OP_BUSY BIT(15)
+#define GLOBAL_ATU_OP_NOP (0 << 12)
+#define GLOBAL_ATU_OP_FLUSH_ALL ((1 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_UNLOCKED ((2 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_LOAD_DB ((3 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_NEXT_DB ((4 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_DB ((5 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_UNLOCKED_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_DATA 0x0c
+#define GLOBAL_ATU_DATA_PORT_VECTOR_MASK 0x3f0
+#define GLOBAL_ATU_DATA_PORT_VECTOR_SHIFT 4
+#define GLOBAL_ATU_DATA_STATE_MASK 0x0f
+#define GLOBAL_ATU_DATA_STATE_UNUSED 0x00
+#define GLOBAL_ATU_DATA_STATE_UC_STATIC 0x0e
+#define GLOBAL_ATU_DATA_STATE_UC_LOCKED 0x0f
+#define GLOBAL_ATU_DATA_STATE_MC_STATIC 0x07
+#define GLOBAL_ATU_DATA_STATE_MC_LOCKED 0x0e
+#define GLOBAL_ATU_MAC_01 0x0d
+#define GLOBAL_ATU_MAC_23 0x0e
+#define GLOBAL_ATU_MAC_45 0x0f
+
+#endif
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 05aa759..955d06b 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -78,7 +78,6 @@
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/xscale/Kconfig"
-source "drivers/net/ethernet/icplus/Kconfig"
config JME
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ddfc808..4a2ee98 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -41,7 +41,6 @@
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
-obj-$(CONFIG_IP1000) += icplus/
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index e2afabf..7ccebae 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1500,10 +1500,11 @@
return -ENODEV;
}
- if (!pci_set_dma_mask(pdev, PCNET32_DMA_MASK)) {
+ err = pci_set_dma_mask(pdev, PCNET32_DMA_MASK);
+ if (err) {
if (pcnet32_debug & NETIF_MSG_PROBE)
pr_err("architecture does not support 32bit PCI busmaster DMA\n");
- return -ENODEV;
+ return err;
}
if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci")) {
if (pcnet32_debug & NETIF_MSG_PROBE)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index f1d62d5..c9b0367 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13207,7 +13207,7 @@
/* VF with OLD Hypervisor or old PF do not support filtering */
if (IS_PF(bp)) {
- if (CHIP_IS_E1x(bp))
+ if (chip_is_e1x)
bp->accept_any_vlan = true;
else
dev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c
index f683d97..b895044 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c
@@ -560,7 +560,7 @@
#endif
/* For PCI-E Advanced Error Recovery (AER) Interface */
-static struct pci_error_handlers liquidio_err_handler = {
+static const struct pci_error_handlers liquidio_err_handler = {
.error_detected = liquidio_pcie_error_detected,
.mmio_enabled = liquidio_pcie_mmio_enabled,
.slot_reset = liquidio_pcie_slot_reset,
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index a937772..7f709cb 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1583,8 +1583,14 @@
static void nicvf_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
- struct nicvf *nic = netdev_priv(netdev);
- struct net_device *pnetdev = nic->pnicvf->netdev;
+ struct nicvf *nic;
+ struct net_device *pnetdev;
+
+ if (!netdev)
+ return;
+
+ nic = netdev_priv(netdev);
+ pnetdev = nic->pnicvf->netdev;
/* Check if this Qset is assigned to different VF.
* If yes, clean primary and all secondary Qsets.
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index f6e858d..ebdc832 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -17,15 +17,16 @@
if NET_VENDOR_DLINK
config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support"
depends on PCI
select CRC32
---help---
- This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards,
which includes
D-Link DGE-550T Gigabit Ethernet Adapter.
D-Link DL2000-based Gigabit Ethernet Adapter.
Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+ ICPlus IP1000A-based cards
To compile this driver as a module, choose M here: the
module will be called dl2k.
diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index cf0a5fc..ccca479 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -253,6 +253,19 @@
if (err)
goto err_out_unmap_rx;
+ if (np->chip_id == CHIP_IP1000A &&
+ (np->pdev->revision == 0x40 || np->pdev->revision == 0x41)) {
+ /* PHY magic taken from ipg driver, undocumented registers */
+ mii_write(dev, np->phy_addr, 31, 0x0001);
+ mii_write(dev, np->phy_addr, 27, 0x01e0);
+ mii_write(dev, np->phy_addr, 31, 0x0002);
+ mii_write(dev, np->phy_addr, 27, 0xeb8e);
+ mii_write(dev, np->phy_addr, 31, 0x0000);
+ mii_write(dev, np->phy_addr, 30, 0x005e);
+ /* advertise 1000BASE-T half & full duplex, prefer MASTER */
+ mii_write(dev, np->phy_addr, MII_CTRL1000, 0x0700);
+ }
+
/* Fiber device? */
np->phy_media = (dr16(ASICCtrl) & PhyMedia) ? 1 : 0;
np->link_status = 0;
@@ -361,6 +374,11 @@
for (i = 0; i < 6; i++)
dev->dev_addr[i] = psrom->mac_addr[i];
+ if (np->chip_id == CHIP_IP1000A) {
+ np->led_mode = psrom->led_mode;
+ return 0;
+ }
+
if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) {
return 0;
}
@@ -406,6 +424,28 @@
return 0;
}
+static void rio_set_led_mode(struct net_device *dev)
+{
+ struct netdev_private *np = netdev_priv(dev);
+ void __iomem *ioaddr = np->ioaddr;
+ u32 mode;
+
+ if (np->chip_id != CHIP_IP1000A)
+ return;
+
+ mode = dr32(ASICCtrl);
+ mode &= ~(IPG_AC_LED_MODE_BIT_1 | IPG_AC_LED_MODE | IPG_AC_LED_SPEED);
+
+ if (np->led_mode & 0x01)
+ mode |= IPG_AC_LED_MODE;
+ if (np->led_mode & 0x02)
+ mode |= IPG_AC_LED_MODE_BIT_1;
+ if (np->led_mode & 0x08)
+ mode |= IPG_AC_LED_SPEED;
+
+ dw32(ASICCtrl, mode);
+}
+
static int
rio_open (struct net_device *dev)
{
@@ -424,6 +464,8 @@
GlobalReset | DMAReset | FIFOReset | NetworkReset | HostReset);
mdelay(10);
+ rio_set_led_mode(dev);
+
/* DebugCtrl bit 4, 5, 9 must set */
dw32(DebugCtrl, dr32(DebugCtrl) | 0x0230);
@@ -433,9 +475,13 @@
alloc_list (dev);
- /* Get station address */
- for (i = 0; i < 6; i++)
- dw8(StationAddr0 + i, dev->dev_addr[i]);
+ /* Set station address */
+ /* 16 or 32-bit access is required by TC9020 datasheet but 8-bit works
+ * too. However, it doesn't work on IP1000A so we use 16-bit access.
+ */
+ for (i = 0; i < 3; i++)
+ dw16(StationAddr0 + 2 * i,
+ cpu_to_le16(((u16 *)dev->dev_addr)[i]));
set_multicast (dev);
if (np->coalesce) {
@@ -780,6 +826,7 @@
break;
mdelay (1);
}
+ rio_set_led_mode(dev);
rio_free_tx (dev, 1);
/* Reset TFDListPtr */
dw32(TFDListPtr0, np->tx_ring_dma +
@@ -799,6 +846,7 @@
break;
mdelay (1);
}
+ rio_set_led_mode(dev);
/* Let TxStartThresh stay default value */
}
/* Maximum Collisions */
@@ -965,6 +1013,7 @@
dev->name, int_status);
dw16(ASICCtrl + 2, GlobalReset | HostReset);
mdelay (500);
+ rio_set_led_mode(dev);
}
}
diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 23c07b0..8f4f612 100644
--- a/drivers/net/ethernet/dlink/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -211,6 +211,10 @@
ResetBusy = 0x0400,
};
+#define IPG_AC_LED_MODE BIT(14)
+#define IPG_AC_LED_SPEED BIT(27)
+#define IPG_AC_LED_MODE_BIT_1 BIT(29)
+
/* Transmit Frame Control bits */
enum TFC_bits {
DwordAlign = 0x00000000,
@@ -332,7 +336,10 @@
u16 asic_ctrl; /* 0x02 */
u16 sub_vendor_id; /* 0x04 */
u16 sub_system_id; /* 0x06 */
- u16 reserved1[12]; /* 0x08-0x1f */
+ u16 pci_base_1; /* 0x08 (IP1000A only) */
+ u16 pci_base_2; /* 0x0a (IP1000A only) */
+ u16 led_mode; /* 0x0c (IP1000A only) */
+ u16 reserved1[9]; /* 0x0e-0x1f */
u8 mac_addr[6]; /* 0x20-0x25 */
u8 reserved2[10]; /* 0x26-0x2f */
u8 sib[204]; /* 0x30-0xfb */
@@ -397,6 +404,7 @@
u16 advertising; /* NWay media advertisement */
u16 negotiate; /* Negotiated media */
int phy_addr; /* PHY addresses. */
+ u16 led_mode; /* LED mode read from EEPROM (IP1000A only) */
};
/* The station address location in the EEPROM. */
@@ -407,10 +415,15 @@
class_mask of the class are honored during the comparison.
driver_data Data private to the driver.
*/
+#define CHIP_IP1000A 1
static const struct pci_device_id rio_pci_tbl[] = {
{0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, },
{0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VDEVICE(SUNDANCE, 0x1023), CHIP_IP1000A },
+ { PCI_VDEVICE(SUNDANCE, 0x2021), CHIP_IP1000A },
+ { PCI_VDEVICE(DLINK, 0x9021), CHIP_IP1000A },
+ { PCI_VDEVICE(DLINK, 0x4020), CHIP_IP1000A },
{ }
};
MODULE_DEVICE_TABLE (pci, rio_pci_tbl);
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index f4cb8e4..734f655 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1062,9 +1062,7 @@
static int be_set_rss_hash_opts(struct be_adapter *adapter,
struct ethtool_rxnfc *cmd)
{
- struct be_rx_obj *rxo;
- int status = 0, i, j;
- u8 rsstable[128];
+ int status;
u32 rss_flags = adapter->rss_info.rss_flags;
if (cmd->data != L3_RSS_FLAGS &&
@@ -1113,20 +1111,11 @@
}
if (rss_flags == adapter->rss_info.rss_flags)
- return status;
-
- if (be_multi_rxq(adapter)) {
- for (j = 0; j < 128; j += adapter->num_rss_qs) {
- for_all_rss_queues(adapter, rxo, i) {
- if ((j + i) >= 128)
- break;
- rsstable[j + i] = rxo->rss_id;
- }
- }
- }
+ return 0;
status = be_cmd_rss_config(adapter, adapter->rss_info.rsstable,
- rss_flags, 128, adapter->rss_info.rss_hkey);
+ rss_flags, RSS_INDIR_TABLE_LEN,
+ adapter->rss_info.rss_hkey);
if (!status)
adapter->rss_info.rss_flags = rss_flags;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index eb48a97..b6ad029 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3518,7 +3518,7 @@
netdev_rss_key_fill(rss_key, RSS_HASH_KEY_LEN);
rc = be_cmd_rss_config(adapter, rss->rsstable, rss->rss_flags,
- 128, rss_key);
+ RSS_INDIR_TABLE_LEN, rss_key);
if (rc) {
rss->rss_flags = RSS_ENABLE_NONE;
return rc;
diff --git a/drivers/net/ethernet/icplus/Kconfig b/drivers/net/ethernet/icplus/Kconfig
deleted file mode 100644
index 14a66e9..0000000
--- a/drivers/net/ethernet/icplus/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# IC Plus device configuration
-#
-
-config IP1000
- tristate "IP1000 Gigabit Ethernet support"
- depends on PCI
- select MII
- ---help---
- This driver supports IP1000 gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called ipg. This is recommended.
diff --git a/drivers/net/ethernet/icplus/Makefile b/drivers/net/ethernet/icplus/Makefile
deleted file mode 100644
index 5bc87c1..0000000
--- a/drivers/net/ethernet/icplus/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the IC Plus device drivers
-#
-
-obj-$(CONFIG_IP1000) += ipg.o
diff --git a/drivers/net/ethernet/icplus/ipg.c b/drivers/net/ethernet/icplus/ipg.c
deleted file mode 100644
index c3b6af8..0000000
--- a/drivers/net/ethernet/icplus/ipg.c
+++ /dev/null
@@ -1,2300 +0,0 @@
-/*
- * ipg.c: Device Driver for the IP1000 Gigabit Ethernet Adapter
- *
- * Copyright (C) 2003, 2007 IC Plus Corp
- *
- * Original Author:
- *
- * Craig Rich
- * Sundance Technology, Inc.
- * www.sundanceti.com
- * craig_rich@sundanceti.com
- *
- * Current Maintainer:
- *
- * Sorbica Shieh.
- * http://www.icplus.com.tw
- * sorbica@icplus.com.tw
- *
- * Jesse Huang
- * http://www.icplus.com.tw
- * jesse@icplus.com.tw
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/crc32.h>
-#include <linux/ethtool.h>
-#include <linux/interrupt.h>
-#include <linux/gfp.h>
-#include <linux/mii.h>
-#include <linux/mutex.h>
-
-#include <asm/div64.h>
-
-#define IPG_RX_RING_BYTES (sizeof(struct ipg_rx) * IPG_RFDLIST_LENGTH)
-#define IPG_TX_RING_BYTES (sizeof(struct ipg_tx) * IPG_TFDLIST_LENGTH)
-#define IPG_RESET_MASK \
- (IPG_AC_GLOBAL_RESET | IPG_AC_RX_RESET | IPG_AC_TX_RESET | \
- IPG_AC_DMA | IPG_AC_FIFO | IPG_AC_NETWORK | IPG_AC_HOST | \
- IPG_AC_AUTO_INIT)
-
-#define ipg_w32(val32, reg) iowrite32((val32), ioaddr + (reg))
-#define ipg_w16(val16, reg) iowrite16((val16), ioaddr + (reg))
-#define ipg_w8(val8, reg) iowrite8((val8), ioaddr + (reg))
-
-#define ipg_r32(reg) ioread32(ioaddr + (reg))
-#define ipg_r16(reg) ioread16(ioaddr + (reg))
-#define ipg_r8(reg) ioread8(ioaddr + (reg))
-
-enum {
- netdev_io_size = 128
-};
-
-#include "ipg.h"
-#define DRV_NAME "ipg"
-
-MODULE_AUTHOR("IC Plus Corp. 2003");
-MODULE_DESCRIPTION("IC Plus IP1000 Gigabit Ethernet Adapter Linux Driver");
-MODULE_LICENSE("GPL");
-
-/*
- * Defaults
- */
-#define IPG_MAX_RXFRAME_SIZE 0x0600
-#define IPG_RXFRAG_SIZE 0x0600
-#define IPG_RXSUPPORT_SIZE 0x0600
-#define IPG_IS_JUMBO false
-
-/*
- * Variable record -- index by leading revision/length
- * Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
- */
-static const unsigned short DefaultPhyParam[] = {
- /* 11/12/03 IP1000A v1-3 rev=0x40 */
- /*--------------------------------------------------------------------------
- (0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
- 27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6,
- 31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700,
- --------------------------------------------------------------------------*/
- /* 12/17/03 IP1000A v1-4 rev=0x40 */
- (0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- /* 01/09/04 IP1000A v1-5 rev=0x41 */
- (0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
- 0x0000,
- 30, 0x005e, 9, 0x0700,
- 0x0000
-};
-
-static const char * const ipg_brand_name[] = {
- "IC PLUS IP1000 1000/100/10 based NIC",
- "Sundance Technology ST2021 based NIC",
- "Tamarack Microelectronics TC9020/9021 based NIC",
- "D-Link NIC IP1000A"
-};
-
-static const struct pci_device_id ipg_pci_tbl[] = {
- { PCI_VDEVICE(SUNDANCE, 0x1023), 0 },
- { PCI_VDEVICE(SUNDANCE, 0x2021), 1 },
- { PCI_VDEVICE(DLINK, 0x9021), 2 },
- { PCI_VDEVICE(DLINK, 0x4020), 3 },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, ipg_pci_tbl);
-
-static inline void __iomem *ipg_ioaddr(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- return sp->ioaddr;
-}
-
-#ifdef IPG_DEBUG
-static void ipg_dump_rfdlist(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
- u32 offset;
-
- IPG_DEBUG_MSG("_dump_rfdlist\n");
-
- netdev_info(dev, "rx_current = %02x\n", sp->rx_current);
- netdev_info(dev, "rx_dirty = %02x\n", sp->rx_dirty);
- netdev_info(dev, "RFDList start address = %016lx\n",
- (unsigned long)sp->rxd_map);
- netdev_info(dev, "RFDListPtr register = %08x%08x\n",
- ipg_r32(IPG_RFDLISTPTR1), ipg_r32(IPG_RFDLISTPTR0));
-
- for (i = 0; i < IPG_RFDLIST_LENGTH; i++) {
- offset = (u32) &sp->rxd[i].next_desc - (u32) sp->rxd;
- netdev_info(dev, "%02x %04x RFDNextPtr = %016lx\n",
- i, offset, (unsigned long)sp->rxd[i].next_desc);
- offset = (u32) &sp->rxd[i].rfs - (u32) sp->rxd;
- netdev_info(dev, "%02x %04x RFS = %016lx\n",
- i, offset, (unsigned long)sp->rxd[i].rfs);
- offset = (u32) &sp->rxd[i].frag_info - (u32) sp->rxd;
- netdev_info(dev, "%02x %04x frag_info = %016lx\n",
- i, offset, (unsigned long)sp->rxd[i].frag_info);
- }
-}
-
-static void ipg_dump_tfdlist(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
- u32 offset;
-
- IPG_DEBUG_MSG("_dump_tfdlist\n");
-
- netdev_info(dev, "tx_current = %02x\n", sp->tx_current);
- netdev_info(dev, "tx_dirty = %02x\n", sp->tx_dirty);
- netdev_info(dev, "TFDList start address = %016lx\n",
- (unsigned long) sp->txd_map);
- netdev_info(dev, "TFDListPtr register = %08x%08x\n",
- ipg_r32(IPG_TFDLISTPTR1), ipg_r32(IPG_TFDLISTPTR0));
-
- for (i = 0; i < IPG_TFDLIST_LENGTH; i++) {
- offset = (u32) &sp->txd[i].next_desc - (u32) sp->txd;
- netdev_info(dev, "%02x %04x TFDNextPtr = %016lx\n",
- i, offset, (unsigned long)sp->txd[i].next_desc);
-
- offset = (u32) &sp->txd[i].tfc - (u32) sp->txd;
- netdev_info(dev, "%02x %04x TFC = %016lx\n",
- i, offset, (unsigned long) sp->txd[i].tfc);
- offset = (u32) &sp->txd[i].frag_info - (u32) sp->txd;
- netdev_info(dev, "%02x %04x frag_info = %016lx\n",
- i, offset, (unsigned long) sp->txd[i].frag_info);
- }
-}
-#endif
-
-static void ipg_write_phy_ctl(void __iomem *ioaddr, u8 data)
-{
- ipg_w8(IPG_PC_RSVD_MASK & data, PHY_CTRL);
- ndelay(IPG_PC_PHYCTRLWAIT_NS);
-}
-
-static void ipg_drive_phy_ctl_low_high(void __iomem *ioaddr, u8 data)
-{
- ipg_write_phy_ctl(ioaddr, IPG_PC_MGMTCLK_LO | data);
- ipg_write_phy_ctl(ioaddr, IPG_PC_MGMTCLK_HI | data);
-}
-
-static void send_three_state(void __iomem *ioaddr, u8 phyctrlpolarity)
-{
- phyctrlpolarity |= (IPG_PC_MGMTDATA & 0) | IPG_PC_MGMTDIR;
-
- ipg_drive_phy_ctl_low_high(ioaddr, phyctrlpolarity);
-}
-
-static void send_end(void __iomem *ioaddr, u8 phyctrlpolarity)
-{
- ipg_w8((IPG_PC_MGMTCLK_LO | (IPG_PC_MGMTDATA & 0) | IPG_PC_MGMTDIR |
- phyctrlpolarity) & IPG_PC_RSVD_MASK, PHY_CTRL);
-}
-
-static u16 read_phy_bit(void __iomem *ioaddr, u8 phyctrlpolarity)
-{
- u16 bit_data;
-
- ipg_write_phy_ctl(ioaddr, IPG_PC_MGMTCLK_LO | phyctrlpolarity);
-
- bit_data = ((ipg_r8(PHY_CTRL) & IPG_PC_MGMTDATA) >> 1) & 1;
-
- ipg_write_phy_ctl(ioaddr, IPG_PC_MGMTCLK_HI | phyctrlpolarity);
-
- return bit_data;
-}
-
-/*
- * Read a register from the Physical Layer device located
- * on the IPG NIC, using the IPG PHYCTRL register.
- */
-static int mdio_read(struct net_device *dev, int phy_id, int phy_reg)
-{
- void __iomem *ioaddr = ipg_ioaddr(dev);
- /*
- * The GMII mangement frame structure for a read is as follows:
- *
- * |Preamble|st|op|phyad|regad|ta| data |idle|
- * |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
- *
- * <32 1s> = 32 consecutive logic 1 values
- * A = bit of Physical Layer device address (MSB first)
- * R = bit of register address (MSB first)
- * z = High impedance state
- * D = bit of read data (MSB first)
- *
- * Transmission order is 'Preamble' field first, bits transmitted
- * left to right (first to last).
- */
- struct {
- u32 field;
- unsigned int len;
- } p[] = {
- { GMII_PREAMBLE, 32 }, /* Preamble */
- { GMII_ST, 2 }, /* ST */
- { GMII_READ, 2 }, /* OP */
- { phy_id, 5 }, /* PHYAD */
- { phy_reg, 5 }, /* REGAD */
- { 0x0000, 2 }, /* TA */
- { 0x0000, 16 }, /* DATA */
- { 0x0000, 1 } /* IDLE */
- };
- unsigned int i, j;
- u8 polarity, data;
-
- polarity = ipg_r8(PHY_CTRL);
- polarity &= (IPG_PC_DUPLEX_POLARITY | IPG_PC_LINK_POLARITY);
-
- /* Create the Preamble, ST, OP, PHYAD, and REGAD field. */
- for (j = 0; j < 5; j++) {
- for (i = 0; i < p[j].len; i++) {
- /* For each variable length field, the MSB must be
- * transmitted first. Rotate through the field bits,
- * starting with the MSB, and move each bit into the
- * the 1st (2^1) bit position (this is the bit position
- * corresponding to the MgmtData bit of the PhyCtrl
- * register for the IPG).
- *
- * Example: ST = 01;
- *
- * First write a '0' to bit 1 of the PhyCtrl
- * register, then write a '1' to bit 1 of the
- * PhyCtrl register.
- *
- * To do this, right shift the MSB of ST by the value:
- * [field length - 1 - #ST bits already written]
- * then left shift this result by 1.
- */
- data = (p[j].field >> (p[j].len - 1 - i)) << 1;
- data &= IPG_PC_MGMTDATA;
- data |= polarity | IPG_PC_MGMTDIR;
-
- ipg_drive_phy_ctl_low_high(ioaddr, data);
- }
- }
-
- send_three_state(ioaddr, polarity);
-
- read_phy_bit(ioaddr, polarity);
-
- /*
- * For a read cycle, the bits for the next two fields (TA and
- * DATA) are driven by the PHY (the IPG reads these bits).
- */
- for (i = 0; i < p[6].len; i++) {
- p[6].field |=
- (read_phy_bit(ioaddr, polarity) << (p[6].len - 1 - i));
- }
-
- send_three_state(ioaddr, polarity);
- send_three_state(ioaddr, polarity);
- send_three_state(ioaddr, polarity);
- send_end(ioaddr, polarity);
-
- /* Return the value of the DATA field. */
- return p[6].field;
-}
-
-/*
- * Write to a register from the Physical Layer device located
- * on the IPG NIC, using the IPG PHYCTRL register.
- */
-static void mdio_write(struct net_device *dev, int phy_id, int phy_reg, int val)
-{
- void __iomem *ioaddr = ipg_ioaddr(dev);
- /*
- * The GMII mangement frame structure for a read is as follows:
- *
- * |Preamble|st|op|phyad|regad|ta| data |idle|
- * |< 32 1s>|01|10|AAAAA|RRRRR|z0|DDDDDDDDDDDDDDDD|z |
- *
- * <32 1s> = 32 consecutive logic 1 values
- * A = bit of Physical Layer device address (MSB first)
- * R = bit of register address (MSB first)
- * z = High impedance state
- * D = bit of write data (MSB first)
- *
- * Transmission order is 'Preamble' field first, bits transmitted
- * left to right (first to last).
- */
- struct {
- u32 field;
- unsigned int len;
- } p[] = {
- { GMII_PREAMBLE, 32 }, /* Preamble */
- { GMII_ST, 2 }, /* ST */
- { GMII_WRITE, 2 }, /* OP */
- { phy_id, 5 }, /* PHYAD */
- { phy_reg, 5 }, /* REGAD */
- { 0x0002, 2 }, /* TA */
- { val & 0xffff, 16 }, /* DATA */
- { 0x0000, 1 } /* IDLE */
- };
- unsigned int i, j;
- u8 polarity, data;
-
- polarity = ipg_r8(PHY_CTRL);
- polarity &= (IPG_PC_DUPLEX_POLARITY | IPG_PC_LINK_POLARITY);
-
- /* Create the Preamble, ST, OP, PHYAD, and REGAD field. */
- for (j = 0; j < 7; j++) {
- for (i = 0; i < p[j].len; i++) {
- /* For each variable length field, the MSB must be
- * transmitted first. Rotate through the field bits,
- * starting with the MSB, and move each bit into the
- * the 1st (2^1) bit position (this is the bit position
- * corresponding to the MgmtData bit of the PhyCtrl
- * register for the IPG).
- *
- * Example: ST = 01;
- *
- * First write a '0' to bit 1 of the PhyCtrl
- * register, then write a '1' to bit 1 of the
- * PhyCtrl register.
- *
- * To do this, right shift the MSB of ST by the value:
- * [field length - 1 - #ST bits already written]
- * then left shift this result by 1.
- */
- data = (p[j].field >> (p[j].len - 1 - i)) << 1;
- data &= IPG_PC_MGMTDATA;
- data |= polarity | IPG_PC_MGMTDIR;
-
- ipg_drive_phy_ctl_low_high(ioaddr, data);
- }
- }
-
- /* The last cycle is a tri-state, so read from the PHY. */
- ipg_write_phy_ctl(ioaddr, IPG_PC_MGMTCLK_LO | polarity);
- ipg_r8(PHY_CTRL);
- ipg_write_phy_ctl(ioaddr, IPG_PC_MGMTCLK_HI | polarity);
-}
-
-static void ipg_set_led_mode(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- u32 mode;
-
- mode = ipg_r32(ASIC_CTRL);
- mode &= ~(IPG_AC_LED_MODE_BIT_1 | IPG_AC_LED_MODE | IPG_AC_LED_SPEED);
-
- if ((sp->led_mode & 0x03) > 1)
- mode |= IPG_AC_LED_MODE_BIT_1; /* Write Asic Control Bit 29 */
-
- if ((sp->led_mode & 0x01) == 1)
- mode |= IPG_AC_LED_MODE; /* Write Asic Control Bit 14 */
-
- if ((sp->led_mode & 0x08) == 8)
- mode |= IPG_AC_LED_SPEED; /* Write Asic Control Bit 27 */
-
- ipg_w32(mode, ASIC_CTRL);
-}
-
-static void ipg_set_phy_set(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- int physet;
-
- physet = ipg_r8(PHY_SET);
- physet &= ~(IPG_PS_MEM_LENB9B | IPG_PS_MEM_LEN9 | IPG_PS_NON_COMPDET);
- physet |= ((sp->led_mode & 0x70) >> 4);
- ipg_w8(physet, PHY_SET);
-}
-
-static int ipg_reset(struct net_device *dev, u32 resetflags)
-{
- /* Assert functional resets via the IPG AsicCtrl
- * register as specified by the 'resetflags' input
- * parameter.
- */
- void __iomem *ioaddr = ipg_ioaddr(dev);
- unsigned int timeout_count = 0;
-
- IPG_DEBUG_MSG("_reset\n");
-
- ipg_w32(ipg_r32(ASIC_CTRL) | resetflags, ASIC_CTRL);
-
- /* Delay added to account for problem with 10Mbps reset. */
- mdelay(IPG_AC_RESETWAIT);
-
- while (IPG_AC_RESET_BUSY & ipg_r32(ASIC_CTRL)) {
- mdelay(IPG_AC_RESETWAIT);
- if (++timeout_count > IPG_AC_RESET_TIMEOUT)
- return -ETIME;
- }
- /* Set LED Mode in Asic Control */
- ipg_set_led_mode(dev);
-
- /* Set PHYSet Register Value */
- ipg_set_phy_set(dev);
- return 0;
-}
-
-/* Find the GMII PHY address. */
-static int ipg_find_phyaddr(struct net_device *dev)
-{
- unsigned int phyaddr, i;
-
- for (i = 0; i < 32; i++) {
- u32 status;
-
- /* Search for the correct PHY address among 32 possible. */
- phyaddr = (IPG_NIC_PHY_ADDRESS + i) % 32;
-
- /* 10/22/03 Grace change verify from GMII_PHY_STATUS to
- GMII_PHY_ID1
- */
-
- status = mdio_read(dev, phyaddr, MII_BMSR);
-
- if ((status != 0xFFFF) && (status != 0))
- return phyaddr;
- }
-
- return 0x1f;
-}
-
-/*
- * Configure IPG based on result of IEEE 802.3 PHY
- * auto-negotiation.
- */
-static int ipg_config_autoneg(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int txflowcontrol;
- unsigned int rxflowcontrol;
- unsigned int fullduplex;
- u32 mac_ctrl_val;
- u32 asicctrl;
- u8 phyctrl;
- const char *speed;
- const char *duplex;
- const char *tx_desc;
- const char *rx_desc;
-
- IPG_DEBUG_MSG("_config_autoneg\n");
-
- asicctrl = ipg_r32(ASIC_CTRL);
- phyctrl = ipg_r8(PHY_CTRL);
- mac_ctrl_val = ipg_r32(MAC_CTRL);
-
- /* Set flags for use in resolving auto-negotiation, assuming
- * non-1000Mbps, half duplex, no flow control.
- */
- fullduplex = 0;
- txflowcontrol = 0;
- rxflowcontrol = 0;
-
- /* To accommodate a problem in 10Mbps operation,
- * set a global flag if PHY running in 10Mbps mode.
- */
- sp->tenmbpsmode = 0;
-
- /* Determine actual speed of operation. */
- switch (phyctrl & IPG_PC_LINK_SPEED) {
- case IPG_PC_LINK_SPEED_10MBPS:
- speed = "10Mbps";
- sp->tenmbpsmode = 1;
- break;
- case IPG_PC_LINK_SPEED_100MBPS:
- speed = "100Mbps";
- break;
- case IPG_PC_LINK_SPEED_1000MBPS:
- speed = "1000Mbps";
- break;
- default:
- speed = "undefined!";
- return 0;
- }
-
- netdev_info(dev, "Link speed = %s\n", speed);
- if (sp->tenmbpsmode == 1)
- netdev_info(dev, "10Mbps operational mode enabled\n");
-
- if (phyctrl & IPG_PC_DUPLEX_STATUS) {
- fullduplex = 1;
- txflowcontrol = 1;
- rxflowcontrol = 1;
- }
-
- /* Configure full duplex, and flow control. */
- if (fullduplex == 1) {
-
- /* Configure IPG for full duplex operation. */
-
- duplex = "full";
-
- mac_ctrl_val |= IPG_MC_DUPLEX_SELECT_FD;
-
- if (txflowcontrol == 1) {
- tx_desc = "";
- mac_ctrl_val |= IPG_MC_TX_FLOW_CONTROL_ENABLE;
- } else {
- tx_desc = "no ";
- mac_ctrl_val &= ~IPG_MC_TX_FLOW_CONTROL_ENABLE;
- }
-
- if (rxflowcontrol == 1) {
- rx_desc = "";
- mac_ctrl_val |= IPG_MC_RX_FLOW_CONTROL_ENABLE;
- } else {
- rx_desc = "no ";
- mac_ctrl_val &= ~IPG_MC_RX_FLOW_CONTROL_ENABLE;
- }
- } else {
- duplex = "half";
- tx_desc = "no ";
- rx_desc = "no ";
- mac_ctrl_val &= (~IPG_MC_DUPLEX_SELECT_FD &
- ~IPG_MC_TX_FLOW_CONTROL_ENABLE &
- ~IPG_MC_RX_FLOW_CONTROL_ENABLE);
- }
-
- netdev_info(dev, "setting %s duplex, %sTX, %sRX flow control\n",
- duplex, tx_desc, rx_desc);
- ipg_w32(mac_ctrl_val, MAC_CTRL);
-
- return 0;
-}
-
-/* Determine and configure multicast operation and set
- * receive mode for IPG.
- */
-static void ipg_nic_set_multicast_list(struct net_device *dev)
-{
- void __iomem *ioaddr = ipg_ioaddr(dev);
- struct netdev_hw_addr *ha;
- unsigned int hashindex;
- u32 hashtable[2];
- u8 receivemode;
-
- IPG_DEBUG_MSG("_nic_set_multicast_list\n");
-
- receivemode = IPG_RM_RECEIVEUNICAST | IPG_RM_RECEIVEBROADCAST;
-
- if (dev->flags & IFF_PROMISC) {
- /* NIC to be configured in promiscuous mode. */
- receivemode = IPG_RM_RECEIVEALLFRAMES;
- } else if ((dev->flags & IFF_ALLMULTI) ||
- ((dev->flags & IFF_MULTICAST) &&
- (netdev_mc_count(dev) > IPG_MULTICAST_HASHTABLE_SIZE))) {
- /* NIC to be configured to receive all multicast
- * frames. */
- receivemode |= IPG_RM_RECEIVEMULTICAST;
- } else if ((dev->flags & IFF_MULTICAST) && !netdev_mc_empty(dev)) {
- /* NIC to be configured to receive selected
- * multicast addresses. */
- receivemode |= IPG_RM_RECEIVEMULTICASTHASH;
- }
-
- /* Calculate the bits to set for the 64 bit, IPG HASHTABLE.
- * The IPG applies a cyclic-redundancy-check (the same CRC
- * used to calculate the frame data FCS) to the destination
- * address all incoming multicast frames whose destination
- * address has the multicast bit set. The least significant
- * 6 bits of the CRC result are used as an addressing index
- * into the hash table. If the value of the bit addressed by
- * this index is a 1, the frame is passed to the host system.
- */
-
- /* Clear hashtable. */
- hashtable[0] = 0x00000000;
- hashtable[1] = 0x00000000;
-
- /* Cycle through all multicast addresses to filter. */
- netdev_for_each_mc_addr(ha, dev) {
- /* Calculate CRC result for each multicast address. */
- hashindex = crc32_le(0xffffffff, ha->addr,
- ETH_ALEN);
-
- /* Use only the least significant 6 bits. */
- hashindex = hashindex & 0x3F;
-
- /* Within "hashtable", set bit number "hashindex"
- * to a logic 1.
- */
- set_bit(hashindex, (void *)hashtable);
- }
-
- /* Write the value of the hashtable, to the 4, 16 bit
- * HASHTABLE IPG registers.
- */
- ipg_w32(hashtable[0], HASHTABLE_0);
- ipg_w32(hashtable[1], HASHTABLE_1);
-
- ipg_w8(IPG_RM_RSVD_MASK & receivemode, RECEIVE_MODE);
-
- IPG_DEBUG_MSG("ReceiveMode = %x\n", ipg_r8(RECEIVE_MODE));
-}
-
-static int ipg_io_config(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = ipg_ioaddr(dev);
- u32 origmacctrl;
- u32 restoremacctrl;
-
- IPG_DEBUG_MSG("_io_config\n");
-
- origmacctrl = ipg_r32(MAC_CTRL);
-
- restoremacctrl = origmacctrl | IPG_MC_STATISTICS_ENABLE;
-
- /* Based on compilation option, determine if FCS is to be
- * stripped on receive frames by IPG.
- */
- if (!IPG_STRIP_FCS_ON_RX)
- restoremacctrl |= IPG_MC_RCV_FCS;
-
- /* Determine if transmitter and/or receiver are
- * enabled so we may restore MACCTRL correctly.
- */
- if (origmacctrl & IPG_MC_TX_ENABLED)
- restoremacctrl |= IPG_MC_TX_ENABLE;
-
- if (origmacctrl & IPG_MC_RX_ENABLED)
- restoremacctrl |= IPG_MC_RX_ENABLE;
-
- /* Transmitter and receiver must be disabled before setting
- * IFSSelect.
- */
- ipg_w32((origmacctrl & (IPG_MC_RX_DISABLE | IPG_MC_TX_DISABLE)) &
- IPG_MC_RSVD_MASK, MAC_CTRL);
-
- /* Now that transmitter and receiver are disabled, write
- * to IFSSelect.
- */
- ipg_w32((origmacctrl & IPG_MC_IFS_96BIT) & IPG_MC_RSVD_MASK, MAC_CTRL);
-
- /* Set RECEIVEMODE register. */
- ipg_nic_set_multicast_list(dev);
-
- ipg_w16(sp->max_rxframe_size, MAX_FRAME_SIZE);
-
- ipg_w8(IPG_RXDMAPOLLPERIOD_VALUE, RX_DMA_POLL_PERIOD);
- ipg_w8(IPG_RXDMAURGENTTHRESH_VALUE, RX_DMA_URGENT_THRESH);
- ipg_w8(IPG_RXDMABURSTTHRESH_VALUE, RX_DMA_BURST_THRESH);
- ipg_w8(IPG_TXDMAPOLLPERIOD_VALUE, TX_DMA_POLL_PERIOD);
- ipg_w8(IPG_TXDMAURGENTTHRESH_VALUE, TX_DMA_URGENT_THRESH);
- ipg_w8(IPG_TXDMABURSTTHRESH_VALUE, TX_DMA_BURST_THRESH);
- ipg_w16((IPG_IE_HOST_ERROR | IPG_IE_TX_DMA_COMPLETE |
- IPG_IE_TX_COMPLETE | IPG_IE_INT_REQUESTED |
- IPG_IE_UPDATE_STATS | IPG_IE_LINK_EVENT |
- IPG_IE_RX_DMA_COMPLETE | IPG_IE_RX_DMA_PRIORITY), INT_ENABLE);
- ipg_w16(IPG_FLOWONTHRESH_VALUE, FLOW_ON_THRESH);
- ipg_w16(IPG_FLOWOFFTHRESH_VALUE, FLOW_OFF_THRESH);
-
- /* IPG multi-frag frame bug workaround.
- * Per silicon revision B3 eratta.
- */
- ipg_w16(ipg_r16(DEBUG_CTRL) | 0x0200, DEBUG_CTRL);
-
- /* IPG TX poll now bug workaround.
- * Per silicon revision B3 eratta.
- */
- ipg_w16(ipg_r16(DEBUG_CTRL) | 0x0010, DEBUG_CTRL);
-
- /* IPG RX poll now bug workaround.
- * Per silicon revision B3 eratta.
- */
- ipg_w16(ipg_r16(DEBUG_CTRL) | 0x0020, DEBUG_CTRL);
-
- /* Now restore MACCTRL to original setting. */
- ipg_w32(IPG_MC_RSVD_MASK & restoremacctrl, MAC_CTRL);
-
- /* Disable unused RMON statistics. */
- ipg_w32(IPG_RZ_ALL, RMON_STATISTICS_MASK);
-
- /* Disable unused MIB statistics. */
- ipg_w32(IPG_SM_MACCONTROLFRAMESXMTD | IPG_SM_MACCONTROLFRAMESRCVD |
- IPG_SM_BCSTOCTETXMTOK_BCSTFRAMESXMTDOK | IPG_SM_TXJUMBOFRAMES |
- IPG_SM_MCSTOCTETXMTOK_MCSTFRAMESXMTDOK | IPG_SM_RXJUMBOFRAMES |
- IPG_SM_BCSTOCTETRCVDOK_BCSTFRAMESRCVDOK |
- IPG_SM_UDPCHECKSUMERRORS | IPG_SM_TCPCHECKSUMERRORS |
- IPG_SM_IPCHECKSUMERRORS, STATISTICS_MASK);
-
- return 0;
-}
-
-/*
- * Create a receive buffer within system memory and update
- * NIC private structure appropriately.
- */
-static int ipg_get_rxbuff(struct net_device *dev, int entry)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- struct ipg_rx *rxfd = sp->rxd + entry;
- struct sk_buff *skb;
- u64 rxfragsize;
-
- IPG_DEBUG_MSG("_get_rxbuff\n");
-
- skb = netdev_alloc_skb_ip_align(dev, sp->rxsupport_size);
- if (!skb) {
- sp->rx_buff[entry] = NULL;
- return -ENOMEM;
- }
-
- /* Save the address of the sk_buff structure. */
- sp->rx_buff[entry] = skb;
-
- rxfd->frag_info = cpu_to_le64(pci_map_single(sp->pdev, skb->data,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE));
-
- /* Set the RFD fragment length. */
- rxfragsize = sp->rxfrag_size;
- rxfd->frag_info |= cpu_to_le64((rxfragsize << 48) & IPG_RFI_FRAGLEN);
-
- return 0;
-}
-
-static int init_rfdlist(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
-
- IPG_DEBUG_MSG("_init_rfdlist\n");
-
- for (i = 0; i < IPG_RFDLIST_LENGTH; i++) {
- struct ipg_rx *rxfd = sp->rxd + i;
-
- if (sp->rx_buff[i]) {
- pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
- dev_kfree_skb_irq(sp->rx_buff[i]);
- sp->rx_buff[i] = NULL;
- }
-
- /* Clear out the RFS field. */
- rxfd->rfs = 0x0000000000000000;
-
- if (ipg_get_rxbuff(dev, i) < 0) {
- /*
- * A receive buffer was not ready, break the
- * RFD list here.
- */
- IPG_DEBUG_MSG("Cannot allocate Rx buffer\n");
-
- /* Just in case we cannot allocate a single RFD.
- * Should not occur.
- */
- if (i == 0) {
- netdev_err(dev, "No memory available for RFD list\n");
- return -ENOMEM;
- }
- }
-
- rxfd->next_desc = cpu_to_le64(sp->rxd_map +
- sizeof(struct ipg_rx)*(i + 1));
- }
- sp->rxd[i - 1].next_desc = cpu_to_le64(sp->rxd_map);
-
- sp->rx_current = 0;
- sp->rx_dirty = 0;
-
- /* Write the location of the RFDList to the IPG. */
- ipg_w32((u32) sp->rxd_map, RFD_LIST_PTR_0);
- ipg_w32(0x00000000, RFD_LIST_PTR_1);
-
- return 0;
-}
-
-static void init_tfdlist(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
-
- IPG_DEBUG_MSG("_init_tfdlist\n");
-
- for (i = 0; i < IPG_TFDLIST_LENGTH; i++) {
- struct ipg_tx *txfd = sp->txd + i;
-
- txfd->tfc = cpu_to_le64(IPG_TFC_TFDDONE);
-
- if (sp->tx_buff[i]) {
- dev_kfree_skb_irq(sp->tx_buff[i]);
- sp->tx_buff[i] = NULL;
- }
-
- txfd->next_desc = cpu_to_le64(sp->txd_map +
- sizeof(struct ipg_tx)*(i + 1));
- }
- sp->txd[i - 1].next_desc = cpu_to_le64(sp->txd_map);
-
- sp->tx_current = 0;
- sp->tx_dirty = 0;
-
- /* Write the location of the TFDList to the IPG. */
- IPG_DDEBUG_MSG("Starting TFDListPtr = %08x\n",
- (u32) sp->txd_map);
- ipg_w32((u32) sp->txd_map, TFD_LIST_PTR_0);
- ipg_w32(0x00000000, TFD_LIST_PTR_1);
-
- sp->reset_current_tfd = 1;
-}
-
-/*
- * Free all transmit buffers which have already been transferred
- * via DMA to the IPG.
- */
-static void ipg_nic_txfree(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- unsigned int released, pending, dirty;
-
- IPG_DEBUG_MSG("_nic_txfree\n");
-
- pending = sp->tx_current - sp->tx_dirty;
- dirty = sp->tx_dirty % IPG_TFDLIST_LENGTH;
-
- for (released = 0; released < pending; released++) {
- struct sk_buff *skb = sp->tx_buff[dirty];
- struct ipg_tx *txfd = sp->txd + dirty;
-
- IPG_DEBUG_MSG("TFC = %016lx\n", (unsigned long) txfd->tfc);
-
- /* Look at each TFD's TFC field beginning
- * at the last freed TFD up to the current TFD.
- * If the TFDDone bit is set, free the associated
- * buffer.
- */
- if (!(txfd->tfc & cpu_to_le64(IPG_TFC_TFDDONE)))
- break;
-
- /* Free the transmit buffer. */
- if (skb) {
- pci_unmap_single(sp->pdev,
- le64_to_cpu(txfd->frag_info) & ~IPG_TFI_FRAGLEN,
- skb->len, PCI_DMA_TODEVICE);
-
- dev_kfree_skb_irq(skb);
-
- sp->tx_buff[dirty] = NULL;
- }
- dirty = (dirty + 1) % IPG_TFDLIST_LENGTH;
- }
-
- sp->tx_dirty += released;
-
- if (netif_queue_stopped(dev) &&
- (sp->tx_current != (sp->tx_dirty + IPG_TFDLIST_LENGTH))) {
- netif_wake_queue(dev);
- }
-}
-
-static void ipg_tx_timeout(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
-
- ipg_reset(dev, IPG_AC_TX_RESET | IPG_AC_DMA | IPG_AC_NETWORK |
- IPG_AC_FIFO);
-
- spin_lock_irq(&sp->lock);
-
- /* Re-configure after DMA reset. */
- if (ipg_io_config(dev) < 0)
- netdev_info(dev, "Error during re-configuration\n");
-
- init_tfdlist(dev);
-
- spin_unlock_irq(&sp->lock);
-
- ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_TX_ENABLE) & IPG_MC_RSVD_MASK,
- MAC_CTRL);
-}
-
-/*
- * For TxComplete interrupts, free all transmit
- * buffers which have already been transferred via DMA
- * to the IPG.
- */
-static void ipg_nic_txcleanup(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
-
- IPG_DEBUG_MSG("_nic_txcleanup\n");
-
- for (i = 0; i < IPG_TFDLIST_LENGTH; i++) {
- /* Reading the TXSTATUS register clears the
- * TX_COMPLETE interrupt.
- */
- u32 txstatusdword = ipg_r32(TX_STATUS);
-
- IPG_DEBUG_MSG("TxStatus = %08x\n", txstatusdword);
-
- /* Check for Transmit errors. Error bits only valid if
- * TX_COMPLETE bit in the TXSTATUS register is a 1.
- */
- if (!(txstatusdword & IPG_TS_TX_COMPLETE))
- break;
-
- /* If in 10Mbps mode, indicate transmit is ready. */
- if (sp->tenmbpsmode) {
- netif_wake_queue(dev);
- }
-
- /* Transmit error, increment stat counters. */
- if (txstatusdword & IPG_TS_TX_ERROR) {
- IPG_DEBUG_MSG("Transmit error\n");
- sp->stats.tx_errors++;
- }
-
- /* Late collision, re-enable transmitter. */
- if (txstatusdword & IPG_TS_LATE_COLLISION) {
- IPG_DEBUG_MSG("Late collision on transmit\n");
- ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_TX_ENABLE) &
- IPG_MC_RSVD_MASK, MAC_CTRL);
- }
-
- /* Maximum collisions, re-enable transmitter. */
- if (txstatusdword & IPG_TS_TX_MAX_COLL) {
- IPG_DEBUG_MSG("Maximum collisions on transmit\n");
- ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_TX_ENABLE) &
- IPG_MC_RSVD_MASK, MAC_CTRL);
- }
-
- /* Transmit underrun, reset and re-enable
- * transmitter.
- */
- if (txstatusdword & IPG_TS_TX_UNDERRUN) {
- IPG_DEBUG_MSG("Transmitter underrun\n");
- sp->stats.tx_fifo_errors++;
- ipg_reset(dev, IPG_AC_TX_RESET | IPG_AC_DMA |
- IPG_AC_NETWORK | IPG_AC_FIFO);
-
- /* Re-configure after DMA reset. */
- if (ipg_io_config(dev) < 0) {
- netdev_info(dev, "Error during re-configuration\n");
- }
- init_tfdlist(dev);
-
- ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_TX_ENABLE) &
- IPG_MC_RSVD_MASK, MAC_CTRL);
- }
- }
-
- ipg_nic_txfree(dev);
-}
-
-/* Provides statistical information about the IPG NIC. */
-static struct net_device_stats *ipg_nic_get_stats(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- u16 temp1;
- u16 temp2;
-
- IPG_DEBUG_MSG("_nic_get_stats\n");
-
- /* Check to see if the NIC has been initialized via nic_open,
- * before trying to read statistic registers.
- */
- if (!netif_running(dev))
- return &sp->stats;
-
- sp->stats.rx_packets += ipg_r32(IPG_FRAMESRCVDOK);
- sp->stats.tx_packets += ipg_r32(IPG_FRAMESXMTDOK);
- sp->stats.rx_bytes += ipg_r32(IPG_OCTETRCVOK);
- sp->stats.tx_bytes += ipg_r32(IPG_OCTETXMTOK);
- temp1 = ipg_r16(IPG_FRAMESLOSTRXERRORS);
- sp->stats.rx_errors += temp1;
- sp->stats.rx_missed_errors += temp1;
- temp1 = ipg_r32(IPG_SINGLECOLFRAMES) + ipg_r32(IPG_MULTICOLFRAMES) +
- ipg_r32(IPG_LATECOLLISIONS);
- temp2 = ipg_r16(IPG_CARRIERSENSEERRORS);
- sp->stats.collisions += temp1;
- sp->stats.tx_dropped += ipg_r16(IPG_FRAMESABORTXSCOLLS);
- sp->stats.tx_errors += ipg_r16(IPG_FRAMESWEXDEFERRAL) +
- ipg_r32(IPG_FRAMESWDEFERREDXMT) + temp1 + temp2;
- sp->stats.multicast += ipg_r32(IPG_MCSTOCTETRCVDOK);
-
- /* detailed tx_errors */
- sp->stats.tx_carrier_errors += temp2;
-
- /* detailed rx_errors */
- sp->stats.rx_length_errors += ipg_r16(IPG_INRANGELENGTHERRORS) +
- ipg_r16(IPG_FRAMETOOLONGERRORS);
- sp->stats.rx_crc_errors += ipg_r16(IPG_FRAMECHECKSEQERRORS);
-
- /* Unutilized IPG statistic registers. */
- ipg_r32(IPG_MCSTFRAMESRCVDOK);
-
- return &sp->stats;
-}
-
-/* Restore used receive buffers. */
-static int ipg_nic_rxrestore(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- const unsigned int curr = sp->rx_current;
- unsigned int dirty = sp->rx_dirty;
-
- IPG_DEBUG_MSG("_nic_rxrestore\n");
-
- for (dirty = sp->rx_dirty; curr - dirty > 0; dirty++) {
- unsigned int entry = dirty % IPG_RFDLIST_LENGTH;
-
- /* rx_copybreak may poke hole here and there. */
- if (sp->rx_buff[entry])
- continue;
-
- /* Generate a new receive buffer to replace the
- * current buffer (which will be released by the
- * Linux system).
- */
- if (ipg_get_rxbuff(dev, entry) < 0) {
- IPG_DEBUG_MSG("Cannot allocate new Rx buffer\n");
-
- break;
- }
-
- /* Reset the RFS field. */
- sp->rxd[entry].rfs = 0x0000000000000000;
- }
- sp->rx_dirty = dirty;
-
- return 0;
-}
-
-/* use jumboindex and jumbosize to control jumbo frame status
- * initial status is jumboindex=-1 and jumbosize=0
- * 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
- * 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
- * 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
- * previous receiving and need to continue dumping the current one
- */
-enum {
- NORMAL_PACKET,
- ERROR_PACKET
-};
-
-enum {
- FRAME_NO_START_NO_END = 0,
- FRAME_WITH_START = 1,
- FRAME_WITH_END = 10,
- FRAME_WITH_START_WITH_END = 11
-};
-
-static void ipg_nic_rx_free_skb(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- unsigned int entry = sp->rx_current % IPG_RFDLIST_LENGTH;
-
- if (sp->rx_buff[entry]) {
- struct ipg_rx *rxfd = sp->rxd + entry;
-
- pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
- dev_kfree_skb_irq(sp->rx_buff[entry]);
- sp->rx_buff[entry] = NULL;
- }
-}
-
-static int ipg_nic_rx_check_frame_type(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- struct ipg_rx *rxfd = sp->rxd + (sp->rx_current % IPG_RFDLIST_LENGTH);
- int type = FRAME_NO_START_NO_END;
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_FRAMESTART)
- type += FRAME_WITH_START;
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_FRAMEEND)
- type += FRAME_WITH_END;
- return type;
-}
-
-static int ipg_nic_rx_check_error(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- unsigned int entry = sp->rx_current % IPG_RFDLIST_LENGTH;
- struct ipg_rx *rxfd = sp->rxd + entry;
-
- if (IPG_DROP_ON_RX_ETH_ERRORS && (le64_to_cpu(rxfd->rfs) &
- (IPG_RFS_RXFIFOOVERRUN | IPG_RFS_RXRUNTFRAME |
- IPG_RFS_RXALIGNMENTERROR | IPG_RFS_RXFCSERROR |
- IPG_RFS_RXOVERSIZEDFRAME | IPG_RFS_RXLENGTHERROR))) {
- IPG_DEBUG_MSG("Rx error, RFS = %016lx\n",
- (unsigned long) rxfd->rfs);
-
- /* Increment general receive error statistic. */
- sp->stats.rx_errors++;
-
- /* Increment detailed receive error statistics. */
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
- IPG_DEBUG_MSG("RX FIFO overrun occurred\n");
-
- sp->stats.rx_fifo_errors++;
- }
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
- IPG_DEBUG_MSG("RX runt occurred\n");
- sp->stats.rx_length_errors++;
- }
-
- /* Do nothing for IPG_RFS_RXOVERSIZEDFRAME,
- * error count handled by a IPG statistic register.
- */
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
- IPG_DEBUG_MSG("RX alignment error occurred\n");
- sp->stats.rx_frame_errors++;
- }
-
- /* Do nothing for IPG_RFS_RXFCSERROR, error count
- * handled by a IPG statistic register.
- */
-
- /* Free the memory associated with the RX
- * buffer since it is erroneous and we will
- * not pass it to higher layer processes.
- */
- if (sp->rx_buff[entry]) {
- pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
-
- dev_kfree_skb_irq(sp->rx_buff[entry]);
- sp->rx_buff[entry] = NULL;
- }
- return ERROR_PACKET;
- }
- return NORMAL_PACKET;
-}
-
-static void ipg_nic_rx_with_start_and_end(struct net_device *dev,
- struct ipg_nic_private *sp,
- struct ipg_rx *rxfd, unsigned entry)
-{
- struct ipg_jumbo *jumbo = &sp->jumbo;
- struct sk_buff *skb;
- int framelen;
-
- if (jumbo->found_start) {
- dev_kfree_skb_irq(jumbo->skb);
- jumbo->found_start = 0;
- jumbo->current_size = 0;
- jumbo->skb = NULL;
- }
-
- /* 1: found error, 0 no error */
- if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
- return;
-
- skb = sp->rx_buff[entry];
- if (!skb)
- return;
-
- /* accept this frame and send to upper layer */
- framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
- if (framelen > sp->rxfrag_size)
- framelen = sp->rxfrag_size;
-
- skb_put(skb, framelen);
- skb->protocol = eth_type_trans(skb, dev);
- skb_checksum_none_assert(skb);
- netif_rx(skb);
- sp->rx_buff[entry] = NULL;
-}
-
-static void ipg_nic_rx_with_start(struct net_device *dev,
- struct ipg_nic_private *sp,
- struct ipg_rx *rxfd, unsigned entry)
-{
- struct ipg_jumbo *jumbo = &sp->jumbo;
- struct pci_dev *pdev = sp->pdev;
- struct sk_buff *skb;
-
- /* 1: found error, 0 no error */
- if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
- return;
-
- /* accept this frame and send to upper layer */
- skb = sp->rx_buff[entry];
- if (!skb)
- return;
-
- if (jumbo->found_start)
- dev_kfree_skb_irq(jumbo->skb);
-
- pci_unmap_single(pdev, le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
-
- skb_put(skb, sp->rxfrag_size);
-
- jumbo->found_start = 1;
- jumbo->current_size = sp->rxfrag_size;
- jumbo->skb = skb;
-
- sp->rx_buff[entry] = NULL;
-}
-
-static void ipg_nic_rx_with_end(struct net_device *dev,
- struct ipg_nic_private *sp,
- struct ipg_rx *rxfd, unsigned entry)
-{
- struct ipg_jumbo *jumbo = &sp->jumbo;
-
- /* 1: found error, 0 no error */
- if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
- struct sk_buff *skb = sp->rx_buff[entry];
-
- if (!skb)
- return;
-
- if (jumbo->found_start) {
- int framelen, endframelen;
-
- framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
-
- endframelen = framelen - jumbo->current_size;
- if (framelen > sp->rxsupport_size)
- dev_kfree_skb_irq(jumbo->skb);
- else {
- memcpy(skb_put(jumbo->skb, endframelen),
- skb->data, endframelen);
-
- jumbo->skb->protocol =
- eth_type_trans(jumbo->skb, dev);
-
- skb_checksum_none_assert(jumbo->skb);
- netif_rx(jumbo->skb);
- }
- }
-
- jumbo->found_start = 0;
- jumbo->current_size = 0;
- jumbo->skb = NULL;
-
- ipg_nic_rx_free_skb(dev);
- } else {
- dev_kfree_skb_irq(jumbo->skb);
- jumbo->found_start = 0;
- jumbo->current_size = 0;
- jumbo->skb = NULL;
- }
-}
-
-static void ipg_nic_rx_no_start_no_end(struct net_device *dev,
- struct ipg_nic_private *sp,
- struct ipg_rx *rxfd, unsigned entry)
-{
- struct ipg_jumbo *jumbo = &sp->jumbo;
-
- /* 1: found error, 0 no error */
- if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
- struct sk_buff *skb = sp->rx_buff[entry];
-
- if (skb) {
- if (jumbo->found_start) {
- jumbo->current_size += sp->rxfrag_size;
- if (jumbo->current_size <= sp->rxsupport_size) {
- memcpy(skb_put(jumbo->skb,
- sp->rxfrag_size),
- skb->data, sp->rxfrag_size);
- }
- }
- ipg_nic_rx_free_skb(dev);
- }
- } else {
- dev_kfree_skb_irq(jumbo->skb);
- jumbo->found_start = 0;
- jumbo->current_size = 0;
- jumbo->skb = NULL;
- }
-}
-
-static int ipg_nic_rx_jumbo(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- unsigned int curr = sp->rx_current;
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
-
- IPG_DEBUG_MSG("_nic_rx\n");
-
- for (i = 0; i < IPG_MAXRFDPROCESS_COUNT; i++, curr++) {
- unsigned int entry = curr % IPG_RFDLIST_LENGTH;
- struct ipg_rx *rxfd = sp->rxd + entry;
-
- if (!(rxfd->rfs & cpu_to_le64(IPG_RFS_RFDDONE)))
- break;
-
- switch (ipg_nic_rx_check_frame_type(dev)) {
- case FRAME_WITH_START_WITH_END:
- ipg_nic_rx_with_start_and_end(dev, sp, rxfd, entry);
- break;
- case FRAME_WITH_START:
- ipg_nic_rx_with_start(dev, sp, rxfd, entry);
- break;
- case FRAME_WITH_END:
- ipg_nic_rx_with_end(dev, sp, rxfd, entry);
- break;
- case FRAME_NO_START_NO_END:
- ipg_nic_rx_no_start_no_end(dev, sp, rxfd, entry);
- break;
- }
- }
-
- sp->rx_current = curr;
-
- if (i == IPG_MAXRFDPROCESS_COUNT) {
- /* There are more RFDs to process, however the
- * allocated amount of RFD processing time has
- * expired. Assert Interrupt Requested to make
- * sure we come back to process the remaining RFDs.
- */
- ipg_w32(ipg_r32(ASIC_CTRL) | IPG_AC_INT_REQUEST, ASIC_CTRL);
- }
-
- ipg_nic_rxrestore(dev);
-
- return 0;
-}
-
-static int ipg_nic_rx(struct net_device *dev)
-{
- /* Transfer received Ethernet frames to higher network layers. */
- struct ipg_nic_private *sp = netdev_priv(dev);
- unsigned int curr = sp->rx_current;
- void __iomem *ioaddr = sp->ioaddr;
- struct ipg_rx *rxfd;
- unsigned int i;
-
- IPG_DEBUG_MSG("_nic_rx\n");
-
-#define __RFS_MASK \
- cpu_to_le64(IPG_RFS_RFDDONE | IPG_RFS_FRAMESTART | IPG_RFS_FRAMEEND)
-
- for (i = 0; i < IPG_MAXRFDPROCESS_COUNT; i++, curr++) {
- unsigned int entry = curr % IPG_RFDLIST_LENGTH;
- struct sk_buff *skb = sp->rx_buff[entry];
- unsigned int framelen;
-
- rxfd = sp->rxd + entry;
-
- if (((rxfd->rfs & __RFS_MASK) != __RFS_MASK) || !skb)
- break;
-
- /* Get received frame length. */
- framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
-
- /* Check for jumbo frame arrival with too small
- * RXFRAG_SIZE.
- */
- if (framelen > sp->rxfrag_size) {
- IPG_DEBUG_MSG
- ("RFS FrameLen > allocated fragment size\n");
-
- framelen = sp->rxfrag_size;
- }
-
- if ((IPG_DROP_ON_RX_ETH_ERRORS && (le64_to_cpu(rxfd->rfs) &
- (IPG_RFS_RXFIFOOVERRUN | IPG_RFS_RXRUNTFRAME |
- IPG_RFS_RXALIGNMENTERROR | IPG_RFS_RXFCSERROR |
- IPG_RFS_RXOVERSIZEDFRAME | IPG_RFS_RXLENGTHERROR)))) {
-
- IPG_DEBUG_MSG("Rx error, RFS = %016lx\n",
- (unsigned long int) rxfd->rfs);
-
- /* Increment general receive error statistic. */
- sp->stats.rx_errors++;
-
- /* Increment detailed receive error statistics. */
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
- IPG_DEBUG_MSG("RX FIFO overrun occurred\n");
- sp->stats.rx_fifo_errors++;
- }
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
- IPG_DEBUG_MSG("RX runt occurred\n");
- sp->stats.rx_length_errors++;
- }
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXOVERSIZEDFRAME) ;
- /* Do nothing, error count handled by a IPG
- * statistic register.
- */
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
- IPG_DEBUG_MSG("RX alignment error occurred\n");
- sp->stats.rx_frame_errors++;
- }
-
- if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFCSERROR) ;
- /* Do nothing, error count handled by a IPG
- * statistic register.
- */
-
- /* Free the memory associated with the RX
- * buffer since it is erroneous and we will
- * not pass it to higher layer processes.
- */
- if (skb) {
- __le64 info = rxfd->frag_info;
-
- pci_unmap_single(sp->pdev,
- le64_to_cpu(info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
-
- dev_kfree_skb_irq(skb);
- }
- } else {
-
- /* Adjust the new buffer length to accommodate the size
- * of the received frame.
- */
- skb_put(skb, framelen);
-
- /* Set the buffer's protocol field to Ethernet. */
- skb->protocol = eth_type_trans(skb, dev);
-
- /* The IPG encountered an error with (or
- * there were no) IP/TCP/UDP checksums.
- * This may or may not indicate an invalid
- * IP/TCP/UDP frame was received. Let the
- * upper layer decide.
- */
- skb_checksum_none_assert(skb);
-
- /* Hand off frame for higher layer processing.
- * The function netif_rx() releases the sk_buff
- * when processing completes.
- */
- netif_rx(skb);
- }
-
- /* Assure RX buffer is not reused by IPG. */
- sp->rx_buff[entry] = NULL;
- }
-
- /*
- * If there are more RFDs to process and the allocated amount of RFD
- * processing time has expired, assert Interrupt Requested to make
- * sure we come back to process the remaining RFDs.
- */
- if (i == IPG_MAXRFDPROCESS_COUNT)
- ipg_w32(ipg_r32(ASIC_CTRL) | IPG_AC_INT_REQUEST, ASIC_CTRL);
-
-#ifdef IPG_DEBUG
- /* Check if the RFD list contained no receive frame data. */
- if (!i)
- sp->EmptyRFDListCount++;
-#endif
- while ((le64_to_cpu(rxfd->rfs) & IPG_RFS_RFDDONE) &&
- !((le64_to_cpu(rxfd->rfs) & IPG_RFS_FRAMESTART) &&
- (le64_to_cpu(rxfd->rfs) & IPG_RFS_FRAMEEND))) {
- unsigned int entry = curr++ % IPG_RFDLIST_LENGTH;
-
- rxfd = sp->rxd + entry;
-
- IPG_DEBUG_MSG("Frame requires multiple RFDs\n");
-
- /* An unexpected event, additional code needed to handle
- * properly. So for the time being, just disregard the
- * frame.
- */
-
- /* Free the memory associated with the RX
- * buffer since it is erroneous and we will
- * not pass it to higher layer processes.
- */
- if (sp->rx_buff[entry]) {
- pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
- dev_kfree_skb_irq(sp->rx_buff[entry]);
- }
-
- /* Assure RX buffer is not reused by IPG. */
- sp->rx_buff[entry] = NULL;
- }
-
- sp->rx_current = curr;
-
- /* Check to see if there are a minimum number of used
- * RFDs before restoring any (should improve performance.)
- */
- if ((curr - sp->rx_dirty) >= IPG_MINUSEDRFDSTOFREE)
- ipg_nic_rxrestore(dev);
-
- return 0;
-}
-
-static void ipg_reset_after_host_error(struct work_struct *work)
-{
- struct ipg_nic_private *sp =
- container_of(work, struct ipg_nic_private, task.work);
- struct net_device *dev = sp->dev;
-
- /*
- * Acknowledge HostError interrupt by resetting
- * IPG DMA and HOST.
- */
- ipg_reset(dev, IPG_AC_GLOBAL_RESET | IPG_AC_HOST | IPG_AC_DMA);
-
- init_rfdlist(dev);
- init_tfdlist(dev);
-
- if (ipg_io_config(dev) < 0) {
- netdev_info(dev, "Cannot recover from PCI error\n");
- schedule_delayed_work(&sp->task, HZ);
- }
-}
-
-static irqreturn_t ipg_interrupt_handler(int irq, void *dev_inst)
-{
- struct net_device *dev = dev_inst;
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int handled = 0;
- u16 status;
-
- IPG_DEBUG_MSG("_interrupt_handler\n");
-
- if (sp->is_jumbo)
- ipg_nic_rxrestore(dev);
-
- spin_lock(&sp->lock);
-
- /* Get interrupt source information, and acknowledge
- * some (i.e. TxDMAComplete, RxDMAComplete, RxEarly,
- * IntRequested, MacControlFrame, LinkEvent) interrupts
- * if issued. Also, all IPG interrupts are disabled by
- * reading IntStatusAck.
- */
- status = ipg_r16(INT_STATUS_ACK);
-
- IPG_DEBUG_MSG("IntStatusAck = %04x\n", status);
-
- /* Shared IRQ of remove event. */
- if (!(status & IPG_IS_RSVD_MASK))
- goto out_enable;
-
- handled = 1;
-
- if (unlikely(!netif_running(dev)))
- goto out_unlock;
-
- /* If RFDListEnd interrupt, restore all used RFDs. */
- if (status & IPG_IS_RFD_LIST_END) {
- IPG_DEBUG_MSG("RFDListEnd Interrupt\n");
-
- /* The RFD list end indicates an RFD was encountered
- * with a 0 NextPtr, or with an RFDDone bit set to 1
- * (indicating the RFD is not read for use by the
- * IPG.) Try to restore all RFDs.
- */
- ipg_nic_rxrestore(dev);
-
-#ifdef IPG_DEBUG
- /* Increment the RFDlistendCount counter. */
- sp->RFDlistendCount++;
-#endif
- }
-
- /* If RFDListEnd, RxDMAPriority, RxDMAComplete, or
- * IntRequested interrupt, process received frames. */
- if ((status & IPG_IS_RX_DMA_PRIORITY) ||
- (status & IPG_IS_RFD_LIST_END) ||
- (status & IPG_IS_RX_DMA_COMPLETE) ||
- (status & IPG_IS_INT_REQUESTED)) {
-#ifdef IPG_DEBUG
- /* Increment the RFD list checked counter if interrupted
- * only to check the RFD list. */
- if (status & (~(IPG_IS_RX_DMA_PRIORITY | IPG_IS_RFD_LIST_END |
- IPG_IS_RX_DMA_COMPLETE | IPG_IS_INT_REQUESTED) &
- (IPG_IS_HOST_ERROR | IPG_IS_TX_DMA_COMPLETE |
- IPG_IS_LINK_EVENT | IPG_IS_TX_COMPLETE |
- IPG_IS_UPDATE_STATS)))
- sp->RFDListCheckedCount++;
-#endif
-
- if (sp->is_jumbo)
- ipg_nic_rx_jumbo(dev);
- else
- ipg_nic_rx(dev);
- }
-
- /* If TxDMAComplete interrupt, free used TFDs. */
- if (status & IPG_IS_TX_DMA_COMPLETE)
- ipg_nic_txfree(dev);
-
- /* TxComplete interrupts indicate one of numerous actions.
- * Determine what action to take based on TXSTATUS register.
- */
- if (status & IPG_IS_TX_COMPLETE)
- ipg_nic_txcleanup(dev);
-
- /* If UpdateStats interrupt, update Linux Ethernet statistics */
- if (status & IPG_IS_UPDATE_STATS)
- ipg_nic_get_stats(dev);
-
- /* If HostError interrupt, reset IPG. */
- if (status & IPG_IS_HOST_ERROR) {
- IPG_DDEBUG_MSG("HostError Interrupt\n");
-
- schedule_delayed_work(&sp->task, 0);
- }
-
- /* If LinkEvent interrupt, resolve autonegotiation. */
- if (status & IPG_IS_LINK_EVENT) {
- if (ipg_config_autoneg(dev) < 0)
- netdev_info(dev, "Auto-negotiation error\n");
- }
-
- /* If MACCtrlFrame interrupt, do nothing. */
- if (status & IPG_IS_MAC_CTRL_FRAME)
- IPG_DEBUG_MSG("MACCtrlFrame interrupt\n");
-
- /* If RxComplete interrupt, do nothing. */
- if (status & IPG_IS_RX_COMPLETE)
- IPG_DEBUG_MSG("RxComplete interrupt\n");
-
- /* If RxEarly interrupt, do nothing. */
- if (status & IPG_IS_RX_EARLY)
- IPG_DEBUG_MSG("RxEarly interrupt\n");
-
-out_enable:
- /* Re-enable IPG interrupts. */
- ipg_w16(IPG_IE_TX_DMA_COMPLETE | IPG_IE_RX_DMA_COMPLETE |
- IPG_IE_HOST_ERROR | IPG_IE_INT_REQUESTED | IPG_IE_TX_COMPLETE |
- IPG_IE_LINK_EVENT | IPG_IE_UPDATE_STATS, INT_ENABLE);
-out_unlock:
- spin_unlock(&sp->lock);
-
- return IRQ_RETVAL(handled);
-}
-
-static void ipg_rx_clear(struct ipg_nic_private *sp)
-{
- unsigned int i;
-
- for (i = 0; i < IPG_RFDLIST_LENGTH; i++) {
- if (sp->rx_buff[i]) {
- struct ipg_rx *rxfd = sp->rxd + i;
-
- dev_kfree_skb_irq(sp->rx_buff[i]);
- sp->rx_buff[i] = NULL;
- pci_unmap_single(sp->pdev,
- le64_to_cpu(rxfd->frag_info) & ~IPG_RFI_FRAGLEN,
- sp->rx_buf_sz, PCI_DMA_FROMDEVICE);
- }
- }
-}
-
-static void ipg_tx_clear(struct ipg_nic_private *sp)
-{
- unsigned int i;
-
- for (i = 0; i < IPG_TFDLIST_LENGTH; i++) {
- if (sp->tx_buff[i]) {
- struct ipg_tx *txfd = sp->txd + i;
-
- pci_unmap_single(sp->pdev,
- le64_to_cpu(txfd->frag_info) & ~IPG_TFI_FRAGLEN,
- sp->tx_buff[i]->len, PCI_DMA_TODEVICE);
-
- dev_kfree_skb_irq(sp->tx_buff[i]);
-
- sp->tx_buff[i] = NULL;
- }
- }
-}
-
-static int ipg_nic_open(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- struct pci_dev *pdev = sp->pdev;
- int rc;
-
- IPG_DEBUG_MSG("_nic_open\n");
-
- sp->rx_buf_sz = sp->rxsupport_size;
-
- /* Check for interrupt line conflicts, and request interrupt
- * line for IPG.
- *
- * IMPORTANT: Disable IPG interrupts prior to registering
- * IRQ.
- */
- ipg_w16(0x0000, INT_ENABLE);
-
- /* Register the interrupt line to be used by the IPG within
- * the Linux system.
- */
- rc = request_irq(pdev->irq, ipg_interrupt_handler, IRQF_SHARED,
- dev->name, dev);
- if (rc < 0) {
- netdev_info(dev, "Error when requesting interrupt\n");
- goto out;
- }
-
- dev->irq = pdev->irq;
-
- rc = -ENOMEM;
-
- sp->rxd = dma_alloc_coherent(&pdev->dev, IPG_RX_RING_BYTES,
- &sp->rxd_map, GFP_KERNEL);
- if (!sp->rxd)
- goto err_free_irq_0;
-
- sp->txd = dma_alloc_coherent(&pdev->dev, IPG_TX_RING_BYTES,
- &sp->txd_map, GFP_KERNEL);
- if (!sp->txd)
- goto err_free_rx_1;
-
- rc = init_rfdlist(dev);
- if (rc < 0) {
- netdev_info(dev, "Error during configuration\n");
- goto err_free_tx_2;
- }
-
- init_tfdlist(dev);
-
- rc = ipg_io_config(dev);
- if (rc < 0) {
- netdev_info(dev, "Error during configuration\n");
- goto err_release_tfdlist_3;
- }
-
- /* Resolve autonegotiation. */
- if (ipg_config_autoneg(dev) < 0)
- netdev_info(dev, "Auto-negotiation error\n");
-
- /* initialize JUMBO Frame control variable */
- sp->jumbo.found_start = 0;
- sp->jumbo.current_size = 0;
- sp->jumbo.skb = NULL;
-
- /* Enable transmit and receive operation of the IPG. */
- ipg_w32((ipg_r32(MAC_CTRL) | IPG_MC_RX_ENABLE | IPG_MC_TX_ENABLE) &
- IPG_MC_RSVD_MASK, MAC_CTRL);
-
- netif_start_queue(dev);
-out:
- return rc;
-
-err_release_tfdlist_3:
- ipg_tx_clear(sp);
- ipg_rx_clear(sp);
-err_free_tx_2:
- dma_free_coherent(&pdev->dev, IPG_TX_RING_BYTES, sp->txd, sp->txd_map);
-err_free_rx_1:
- dma_free_coherent(&pdev->dev, IPG_RX_RING_BYTES, sp->rxd, sp->rxd_map);
-err_free_irq_0:
- free_irq(pdev->irq, dev);
- goto out;
-}
-
-static int ipg_nic_stop(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- struct pci_dev *pdev = sp->pdev;
-
- IPG_DEBUG_MSG("_nic_stop\n");
-
- netif_stop_queue(dev);
-
- IPG_DUMPTFDLIST(dev);
-
- do {
- (void) ipg_r16(INT_STATUS_ACK);
-
- ipg_reset(dev, IPG_AC_GLOBAL_RESET | IPG_AC_HOST | IPG_AC_DMA);
-
- synchronize_irq(pdev->irq);
- } while (ipg_r16(INT_ENABLE) & IPG_IE_RSVD_MASK);
-
- ipg_rx_clear(sp);
-
- ipg_tx_clear(sp);
-
- pci_free_consistent(pdev, IPG_RX_RING_BYTES, sp->rxd, sp->rxd_map);
- pci_free_consistent(pdev, IPG_TX_RING_BYTES, sp->txd, sp->txd_map);
-
- free_irq(pdev->irq, dev);
-
- return 0;
-}
-
-static netdev_tx_t ipg_nic_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int entry = sp->tx_current % IPG_TFDLIST_LENGTH;
- unsigned long flags;
- struct ipg_tx *txfd;
-
- IPG_DDEBUG_MSG("_nic_hard_start_xmit\n");
-
- /* If in 10Mbps mode, stop the transmit queue so
- * no more transmit frames are accepted.
- */
- if (sp->tenmbpsmode)
- netif_stop_queue(dev);
-
- if (sp->reset_current_tfd) {
- sp->reset_current_tfd = 0;
- entry = 0;
- }
-
- txfd = sp->txd + entry;
-
- sp->tx_buff[entry] = skb;
-
- /* Clear all TFC fields, except TFDDONE. */
- txfd->tfc = cpu_to_le64(IPG_TFC_TFDDONE);
-
- /* Specify the TFC field within the TFD. */
- txfd->tfc |= cpu_to_le64(IPG_TFC_WORDALIGNDISABLED |
- (IPG_TFC_FRAMEID & sp->tx_current) |
- (IPG_TFC_FRAGCOUNT & (1 << 24)));
- /*
- * 16--17 (WordAlign) <- 3 (disable),
- * 0--15 (FrameId) <- sp->tx_current,
- * 24--27 (FragCount) <- 1
- */
-
- /* Request TxComplete interrupts at an interval defined
- * by the constant IPG_FRAMESBETWEENTXCOMPLETES.
- * Request TxComplete interrupt for every frame
- * if in 10Mbps mode to accommodate problem with 10Mbps
- * processing.
- */
- if (sp->tenmbpsmode)
- txfd->tfc |= cpu_to_le64(IPG_TFC_TXINDICATE);
- txfd->tfc |= cpu_to_le64(IPG_TFC_TXDMAINDICATE);
- /* Based on compilation option, determine if FCS is to be
- * appended to transmit frame by IPG.
- */
- if (!(IPG_APPEND_FCS_ON_TX))
- txfd->tfc |= cpu_to_le64(IPG_TFC_FCSAPPENDDISABLE);
-
- /* Based on compilation option, determine if IP, TCP and/or
- * UDP checksums are to be added to transmit frame by IPG.
- */
- if (IPG_ADD_IPCHECKSUM_ON_TX)
- txfd->tfc |= cpu_to_le64(IPG_TFC_IPCHECKSUMENABLE);
-
- if (IPG_ADD_TCPCHECKSUM_ON_TX)
- txfd->tfc |= cpu_to_le64(IPG_TFC_TCPCHECKSUMENABLE);
-
- if (IPG_ADD_UDPCHECKSUM_ON_TX)
- txfd->tfc |= cpu_to_le64(IPG_TFC_UDPCHECKSUMENABLE);
-
- /* Based on compilation option, determine if VLAN tag info is to be
- * inserted into transmit frame by IPG.
- */
- if (IPG_INSERT_MANUAL_VLAN_TAG) {
- txfd->tfc |= cpu_to_le64(IPG_TFC_VLANTAGINSERT |
- ((u64) IPG_MANUAL_VLAN_VID << 32) |
- ((u64) IPG_MANUAL_VLAN_CFI << 44) |
- ((u64) IPG_MANUAL_VLAN_USERPRIORITY << 45));
- }
-
- /* The fragment start location within system memory is defined
- * by the sk_buff structure's data field. The physical address
- * of this location within the system's virtual memory space
- * is determined using the IPG_HOST2BUS_MAP function.
- */
- txfd->frag_info = cpu_to_le64(pci_map_single(sp->pdev, skb->data,
- skb->len, PCI_DMA_TODEVICE));
-
- /* The length of the fragment within system memory is defined by
- * the sk_buff structure's len field.
- */
- txfd->frag_info |= cpu_to_le64(IPG_TFI_FRAGLEN &
- ((u64) (skb->len & 0xffff) << 48));
-
- /* Clear the TFDDone bit last to indicate the TFD is ready
- * for transfer to the IPG.
- */
- txfd->tfc &= cpu_to_le64(~IPG_TFC_TFDDONE);
-
- spin_lock_irqsave(&sp->lock, flags);
-
- sp->tx_current++;
-
- mmiowb();
-
- ipg_w32(IPG_DC_TX_DMA_POLL_NOW, DMA_CTRL);
-
- if (sp->tx_current == (sp->tx_dirty + IPG_TFDLIST_LENGTH))
- netif_stop_queue(dev);
-
- spin_unlock_irqrestore(&sp->lock, flags);
-
- return NETDEV_TX_OK;
-}
-
-static void ipg_set_phy_default_param(unsigned char rev,
- struct net_device *dev, int phy_address)
-{
- unsigned short length;
- unsigned char revision;
- const unsigned short *phy_param;
- unsigned short address, value;
-
- phy_param = &DefaultPhyParam[0];
- length = *phy_param & 0x00FF;
- revision = (unsigned char)((*phy_param) >> 8);
- phy_param++;
- while (length != 0) {
- if (rev == revision) {
- while (length > 1) {
- address = *phy_param;
- value = *(phy_param + 1);
- phy_param += 2;
- mdio_write(dev, phy_address, address, value);
- length -= 4;
- }
- break;
- } else {
- phy_param += length / 2;
- length = *phy_param & 0x00FF;
- revision = (unsigned char)((*phy_param) >> 8);
- phy_param++;
- }
- }
-}
-
-static int read_eeprom(struct net_device *dev, int eep_addr)
-{
- void __iomem *ioaddr = ipg_ioaddr(dev);
- unsigned int i;
- int ret = 0;
- u16 value;
-
- value = IPG_EC_EEPROM_READOPCODE | (eep_addr & 0xff);
- ipg_w16(value, EEPROM_CTRL);
-
- for (i = 0; i < 1000; i++) {
- u16 data;
-
- mdelay(10);
- data = ipg_r16(EEPROM_CTRL);
- if (!(data & IPG_EC_EEPROM_BUSY)) {
- ret = ipg_r16(EEPROM_DATA);
- break;
- }
- }
- return ret;
-}
-
-static void ipg_init_mii(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- struct mii_if_info *mii_if = &sp->mii_if;
- int phyaddr;
-
- mii_if->dev = dev;
- mii_if->mdio_read = mdio_read;
- mii_if->mdio_write = mdio_write;
- mii_if->phy_id_mask = 0x1f;
- mii_if->reg_num_mask = 0x1f;
-
- mii_if->phy_id = phyaddr = ipg_find_phyaddr(dev);
-
- if (phyaddr != 0x1f) {
- u16 mii_phyctrl, mii_1000cr;
-
- mii_1000cr = mdio_read(dev, phyaddr, MII_CTRL1000);
- mii_1000cr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF |
- GMII_PHY_1000BASETCONTROL_PreferMaster;
- mdio_write(dev, phyaddr, MII_CTRL1000, mii_1000cr);
-
- mii_phyctrl = mdio_read(dev, phyaddr, MII_BMCR);
-
- /* Set default phyparam */
- ipg_set_phy_default_param(sp->pdev->revision, dev, phyaddr);
-
- /* Reset PHY */
- mii_phyctrl |= BMCR_RESET | BMCR_ANRESTART;
- mdio_write(dev, phyaddr, MII_BMCR, mii_phyctrl);
-
- }
-}
-
-static int ipg_hw_init(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- void __iomem *ioaddr = sp->ioaddr;
- unsigned int i;
- int rc;
-
- /* Read/Write and Reset EEPROM Value */
- /* Read LED Mode Configuration from EEPROM */
- sp->led_mode = read_eeprom(dev, 6);
-
- /* Reset all functions within the IPG. Do not assert
- * RST_OUT as not compatible with some PHYs.
- */
- rc = ipg_reset(dev, IPG_RESET_MASK);
- if (rc < 0)
- goto out;
-
- ipg_init_mii(dev);
-
- /* Read MAC Address from EEPROM */
- for (i = 0; i < 3; i++)
- sp->station_addr[i] = read_eeprom(dev, 16 + i);
-
- for (i = 0; i < 3; i++)
- ipg_w16(sp->station_addr[i], STATION_ADDRESS_0 + 2*i);
-
- /* Set station address in ethernet_device structure. */
- dev->dev_addr[0] = ipg_r16(STATION_ADDRESS_0) & 0x00ff;
- dev->dev_addr[1] = (ipg_r16(STATION_ADDRESS_0) & 0xff00) >> 8;
- dev->dev_addr[2] = ipg_r16(STATION_ADDRESS_1) & 0x00ff;
- dev->dev_addr[3] = (ipg_r16(STATION_ADDRESS_1) & 0xff00) >> 8;
- dev->dev_addr[4] = ipg_r16(STATION_ADDRESS_2) & 0x00ff;
- dev->dev_addr[5] = (ipg_r16(STATION_ADDRESS_2) & 0xff00) >> 8;
-out:
- return rc;
-}
-
-static int ipg_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- int rc;
-
- mutex_lock(&sp->mii_mutex);
- rc = generic_mii_ioctl(&sp->mii_if, if_mii(ifr), cmd, NULL);
- mutex_unlock(&sp->mii_mutex);
-
- return rc;
-}
-
-static int ipg_nic_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- int err;
-
- /* Function to accommodate changes to Maximum Transfer Unit
- * (or MTU) of IPG NIC. Cannot use default function since
- * the default will not allow for MTU > 1500 bytes.
- */
-
- IPG_DEBUG_MSG("_nic_change_mtu\n");
-
- /*
- * Check that the new MTU value is between 68 (14 byte header, 46 byte
- * payload, 4 byte FCS) and 10 KB, which is the largest supported MTU.
- */
- if (new_mtu < 68 || new_mtu > 10240)
- return -EINVAL;
-
- err = ipg_nic_stop(dev);
- if (err)
- return err;
-
- dev->mtu = new_mtu;
-
- sp->max_rxframe_size = new_mtu;
-
- sp->rxfrag_size = new_mtu;
- if (sp->rxfrag_size > 4088)
- sp->rxfrag_size = 4088;
-
- sp->rxsupport_size = sp->max_rxframe_size;
-
- if (new_mtu > 0x0600)
- sp->is_jumbo = true;
- else
- sp->is_jumbo = false;
-
- return ipg_nic_open(dev);
-}
-
-static int ipg_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- int rc;
-
- mutex_lock(&sp->mii_mutex);
- rc = mii_ethtool_gset(&sp->mii_if, cmd);
- mutex_unlock(&sp->mii_mutex);
-
- return rc;
-}
-
-static int ipg_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- int rc;
-
- mutex_lock(&sp->mii_mutex);
- rc = mii_ethtool_sset(&sp->mii_if, cmd);
- mutex_unlock(&sp->mii_mutex);
-
- return rc;
-}
-
-static int ipg_nway_reset(struct net_device *dev)
-{
- struct ipg_nic_private *sp = netdev_priv(dev);
- int rc;
-
- mutex_lock(&sp->mii_mutex);
- rc = mii_nway_restart(&sp->mii_if);
- mutex_unlock(&sp->mii_mutex);
-
- return rc;
-}
-
-static const struct ethtool_ops ipg_ethtool_ops = {
- .get_settings = ipg_get_settings,
- .set_settings = ipg_set_settings,
- .nway_reset = ipg_nway_reset,
-};
-
-static void ipg_remove(struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct ipg_nic_private *sp = netdev_priv(dev);
-
- IPG_DEBUG_MSG("_remove\n");
-
- /* Un-register Ethernet device. */
- unregister_netdev(dev);
-
- pci_iounmap(pdev, sp->ioaddr);
-
- pci_release_regions(pdev);
-
- free_netdev(dev);
- pci_disable_device(pdev);
-}
-
-static const struct net_device_ops ipg_netdev_ops = {
- .ndo_open = ipg_nic_open,
- .ndo_stop = ipg_nic_stop,
- .ndo_start_xmit = ipg_nic_hard_start_xmit,
- .ndo_get_stats = ipg_nic_get_stats,
- .ndo_set_rx_mode = ipg_nic_set_multicast_list,
- .ndo_do_ioctl = ipg_ioctl,
- .ndo_tx_timeout = ipg_tx_timeout,
- .ndo_change_mtu = ipg_nic_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int ipg_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- unsigned int i = id->driver_data;
- struct ipg_nic_private *sp;
- struct net_device *dev;
- void __iomem *ioaddr;
- int rc;
-
- rc = pci_enable_device(pdev);
- if (rc < 0)
- goto out;
-
- pr_info("%s: %s\n", pci_name(pdev), ipg_brand_name[i]);
-
- pci_set_master(pdev);
-
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
- if (rc < 0) {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc < 0) {
- pr_err("%s: DMA config failed\n", pci_name(pdev));
- goto err_disable_0;
- }
- }
-
- /*
- * Initialize net device.
- */
- dev = alloc_etherdev(sizeof(struct ipg_nic_private));
- if (!dev) {
- rc = -ENOMEM;
- goto err_disable_0;
- }
-
- sp = netdev_priv(dev);
- spin_lock_init(&sp->lock);
- mutex_init(&sp->mii_mutex);
-
- sp->is_jumbo = IPG_IS_JUMBO;
- sp->rxfrag_size = IPG_RXFRAG_SIZE;
- sp->rxsupport_size = IPG_RXSUPPORT_SIZE;
- sp->max_rxframe_size = IPG_MAX_RXFRAME_SIZE;
-
- /* Declare IPG NIC functions for Ethernet device methods.
- */
- dev->netdev_ops = &ipg_netdev_ops;
- SET_NETDEV_DEV(dev, &pdev->dev);
- dev->ethtool_ops = &ipg_ethtool_ops;
-
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
- goto err_free_dev_1;
-
- ioaddr = pci_iomap(pdev, 1, pci_resource_len(pdev, 1));
- if (!ioaddr) {
- pr_err("%s: cannot map MMIO\n", pci_name(pdev));
- rc = -EIO;
- goto err_release_regions_2;
- }
-
- /* Save the pointer to the PCI device information. */
- sp->ioaddr = ioaddr;
- sp->pdev = pdev;
- sp->dev = dev;
-
- INIT_DELAYED_WORK(&sp->task, ipg_reset_after_host_error);
-
- pci_set_drvdata(pdev, dev);
-
- rc = ipg_hw_init(dev);
- if (rc < 0)
- goto err_unmap_3;
-
- rc = register_netdev(dev);
- if (rc < 0)
- goto err_unmap_3;
-
- netdev_info(dev, "Ethernet device registered\n");
-out:
- return rc;
-
-err_unmap_3:
- pci_iounmap(pdev, ioaddr);
-err_release_regions_2:
- pci_release_regions(pdev);
-err_free_dev_1:
- free_netdev(dev);
-err_disable_0:
- pci_disable_device(pdev);
- goto out;
-}
-
-static struct pci_driver ipg_pci_driver = {
- .name = IPG_DRIVER_NAME,
- .id_table = ipg_pci_tbl,
- .probe = ipg_probe,
- .remove = ipg_remove,
-};
-
-module_pci_driver(ipg_pci_driver);
diff --git a/drivers/net/ethernet/icplus/ipg.h b/drivers/net/ethernet/icplus/ipg.h
deleted file mode 100644
index de60628..0000000
--- a/drivers/net/ethernet/icplus/ipg.h
+++ /dev/null
@@ -1,748 +0,0 @@
-/*
- * Include file for Gigabit Ethernet device driver for Network
- * Interface Cards (NICs) utilizing the Tamarack Microelectronics
- * Inc. IPG Gigabit or Triple Speed Ethernet Media Access
- * Controller.
- */
-#ifndef __LINUX_IPG_H
-#define __LINUX_IPG_H
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <asm/bitops.h>
-
-/*
- * Constants
- */
-
-/* GMII based PHY IDs */
-#define NS 0x2000
-#define MARVELL 0x0141
-#define ICPLUS_PHY 0x243
-
-/* NIC Physical Layer Device MII register fields. */
-#define MII_PHY_SELECTOR_IEEE8023 0x0001
-#define MII_PHY_TECHABILITYFIELD 0x1FE0
-
-/* GMII_PHY_1000 need to set to prefer master */
-#define GMII_PHY_1000BASETCONTROL_PreferMaster 0x0400
-
-/* NIC Physical Layer Device GMII constants. */
-#define GMII_PREAMBLE 0xFFFFFFFF
-#define GMII_ST 0x1
-#define GMII_READ 0x2
-#define GMII_WRITE 0x1
-#define GMII_TA_READ_MASK 0x1
-#define GMII_TA_WRITE 0x2
-
-/* I/O register offsets. */
-enum ipg_regs {
- DMA_CTRL = 0x00,
- RX_DMA_STATUS = 0x08, /* Unused + reserved */
- TFD_LIST_PTR_0 = 0x10,
- TFD_LIST_PTR_1 = 0x14,
- TX_DMA_BURST_THRESH = 0x18,
- TX_DMA_URGENT_THRESH = 0x19,
- TX_DMA_POLL_PERIOD = 0x1a,
- RFD_LIST_PTR_0 = 0x1c,
- RFD_LIST_PTR_1 = 0x20,
- RX_DMA_BURST_THRESH = 0x24,
- RX_DMA_URGENT_THRESH = 0x25,
- RX_DMA_POLL_PERIOD = 0x26,
- DEBUG_CTRL = 0x2c,
- ASIC_CTRL = 0x30,
- FIFO_CTRL = 0x38, /* Unused */
- FLOW_OFF_THRESH = 0x3c,
- FLOW_ON_THRESH = 0x3e,
- EEPROM_DATA = 0x48,
- EEPROM_CTRL = 0x4a,
- EXPROM_ADDR = 0x4c, /* Unused */
- EXPROM_DATA = 0x50, /* Unused */
- WAKE_EVENT = 0x51, /* Unused */
- COUNTDOWN = 0x54, /* Unused */
- INT_STATUS_ACK = 0x5a,
- INT_ENABLE = 0x5c,
- INT_STATUS = 0x5e, /* Unused */
- TX_STATUS = 0x60,
- MAC_CTRL = 0x6c,
- VLAN_TAG = 0x70, /* Unused */
- PHY_SET = 0x75,
- PHY_CTRL = 0x76,
- STATION_ADDRESS_0 = 0x78,
- STATION_ADDRESS_1 = 0x7a,
- STATION_ADDRESS_2 = 0x7c,
- MAX_FRAME_SIZE = 0x86,
- RECEIVE_MODE = 0x88,
- HASHTABLE_0 = 0x8c,
- HASHTABLE_1 = 0x90,
- RMON_STATISTICS_MASK = 0x98,
- STATISTICS_MASK = 0x9c,
- RX_JUMBO_FRAMES = 0xbc, /* Unused */
- TCP_CHECKSUM_ERRORS = 0xc0, /* Unused */
- IP_CHECKSUM_ERRORS = 0xc2, /* Unused */
- UDP_CHECKSUM_ERRORS = 0xc4, /* Unused */
- TX_JUMBO_FRAMES = 0xf4 /* Unused */
-};
-
-/* Ethernet MIB statistic register offsets. */
-#define IPG_OCTETRCVOK 0xA8
-#define IPG_MCSTOCTETRCVDOK 0xAC
-#define IPG_BCSTOCTETRCVOK 0xB0
-#define IPG_FRAMESRCVDOK 0xB4
-#define IPG_MCSTFRAMESRCVDOK 0xB8
-#define IPG_BCSTFRAMESRCVDOK 0xBE
-#define IPG_MACCONTROLFRAMESRCVD 0xC6
-#define IPG_FRAMETOOLONGERRORS 0xC8
-#define IPG_INRANGELENGTHERRORS 0xCA
-#define IPG_FRAMECHECKSEQERRORS 0xCC
-#define IPG_FRAMESLOSTRXERRORS 0xCE
-#define IPG_OCTETXMTOK 0xD0
-#define IPG_MCSTOCTETXMTOK 0xD4
-#define IPG_BCSTOCTETXMTOK 0xD8
-#define IPG_FRAMESXMTDOK 0xDC
-#define IPG_MCSTFRAMESXMTDOK 0xE0
-#define IPG_FRAMESWDEFERREDXMT 0xE4
-#define IPG_LATECOLLISIONS 0xE8
-#define IPG_MULTICOLFRAMES 0xEC
-#define IPG_SINGLECOLFRAMES 0xF0
-#define IPG_BCSTFRAMESXMTDOK 0xF6
-#define IPG_CARRIERSENSEERRORS 0xF8
-#define IPG_MACCONTROLFRAMESXMTDOK 0xFA
-#define IPG_FRAMESABORTXSCOLLS 0xFC
-#define IPG_FRAMESWEXDEFERRAL 0xFE
-
-/* RMON statistic register offsets. */
-#define IPG_ETHERSTATSCOLLISIONS 0x100
-#define IPG_ETHERSTATSOCTETSTRANSMIT 0x104
-#define IPG_ETHERSTATSPKTSTRANSMIT 0x108
-#define IPG_ETHERSTATSPKTS64OCTESTSTRANSMIT 0x10C
-#define IPG_ETHERSTATSPKTS65TO127OCTESTSTRANSMIT 0x110
-#define IPG_ETHERSTATSPKTS128TO255OCTESTSTRANSMIT 0x114
-#define IPG_ETHERSTATSPKTS256TO511OCTESTSTRANSMIT 0x118
-#define IPG_ETHERSTATSPKTS512TO1023OCTESTSTRANSMIT 0x11C
-#define IPG_ETHERSTATSPKTS1024TO1518OCTESTSTRANSMIT 0x120
-#define IPG_ETHERSTATSCRCALIGNERRORS 0x124
-#define IPG_ETHERSTATSUNDERSIZEPKTS 0x128
-#define IPG_ETHERSTATSFRAGMENTS 0x12C
-#define IPG_ETHERSTATSJABBERS 0x130
-#define IPG_ETHERSTATSOCTETS 0x134
-#define IPG_ETHERSTATSPKTS 0x138
-#define IPG_ETHERSTATSPKTS64OCTESTS 0x13C
-#define IPG_ETHERSTATSPKTS65TO127OCTESTS 0x140
-#define IPG_ETHERSTATSPKTS128TO255OCTESTS 0x144
-#define IPG_ETHERSTATSPKTS256TO511OCTESTS 0x148
-#define IPG_ETHERSTATSPKTS512TO1023OCTESTS 0x14C
-#define IPG_ETHERSTATSPKTS1024TO1518OCTESTS 0x150
-
-/* RMON statistic register equivalents. */
-#define IPG_ETHERSTATSMULTICASTPKTSTRANSMIT 0xE0
-#define IPG_ETHERSTATSBROADCASTPKTSTRANSMIT 0xF6
-#define IPG_ETHERSTATSMULTICASTPKTS 0xB8
-#define IPG_ETHERSTATSBROADCASTPKTS 0xBE
-#define IPG_ETHERSTATSOVERSIZEPKTS 0xC8
-#define IPG_ETHERSTATSDROPEVENTS 0xCE
-
-/* Serial EEPROM offsets */
-#define IPG_EEPROM_CONFIGPARAM 0x00
-#define IPG_EEPROM_ASICCTRL 0x01
-#define IPG_EEPROM_SUBSYSTEMVENDORID 0x02
-#define IPG_EEPROM_SUBSYSTEMID 0x03
-#define IPG_EEPROM_STATIONADDRESS0 0x10
-#define IPG_EEPROM_STATIONADDRESS1 0x11
-#define IPG_EEPROM_STATIONADDRESS2 0x12
-
-/* Register & data structure bit masks */
-
-/* PCI register masks. */
-
-/* IOBaseAddress */
-#define IPG_PIB_RSVD_MASK 0xFFFFFE01
-#define IPG_PIB_IOBASEADDRESS 0xFFFFFF00
-#define IPG_PIB_IOBASEADDRIND 0x00000001
-
-/* MemBaseAddress */
-#define IPG_PMB_RSVD_MASK 0xFFFFFE07
-#define IPG_PMB_MEMBASEADDRIND 0x00000001
-#define IPG_PMB_MEMMAPTYPE 0x00000006
-#define IPG_PMB_MEMMAPTYPE0 0x00000002
-#define IPG_PMB_MEMMAPTYPE1 0x00000004
-#define IPG_PMB_MEMBASEADDRESS 0xFFFFFE00
-
-/* ConfigStatus */
-#define IPG_CS_RSVD_MASK 0xFFB0
-#define IPG_CS_CAPABILITIES 0x0010
-#define IPG_CS_66MHZCAPABLE 0x0020
-#define IPG_CS_FASTBACK2BACK 0x0080
-#define IPG_CS_DATAPARITYREPORTED 0x0100
-#define IPG_CS_DEVSELTIMING 0x0600
-#define IPG_CS_SIGNALEDTARGETABORT 0x0800
-#define IPG_CS_RECEIVEDTARGETABORT 0x1000
-#define IPG_CS_RECEIVEDMASTERABORT 0x2000
-#define IPG_CS_SIGNALEDSYSTEMERROR 0x4000
-#define IPG_CS_DETECTEDPARITYERROR 0x8000
-
-/* TFD data structure masks. */
-
-/* TFDList, TFC */
-#define IPG_TFC_RSVD_MASK 0x0000FFFF9FFFFFFFULL
-#define IPG_TFC_FRAMEID 0x000000000000FFFFULL
-#define IPG_TFC_WORDALIGN 0x0000000000030000ULL
-#define IPG_TFC_WORDALIGNTODWORD 0x0000000000000000ULL
-#define IPG_TFC_WORDALIGNTOWORD 0x0000000000020000ULL
-#define IPG_TFC_WORDALIGNDISABLED 0x0000000000030000ULL
-#define IPG_TFC_TCPCHECKSUMENABLE 0x0000000000040000ULL
-#define IPG_TFC_UDPCHECKSUMENABLE 0x0000000000080000ULL
-#define IPG_TFC_IPCHECKSUMENABLE 0x0000000000100000ULL
-#define IPG_TFC_FCSAPPENDDISABLE 0x0000000000200000ULL
-#define IPG_TFC_TXINDICATE 0x0000000000400000ULL
-#define IPG_TFC_TXDMAINDICATE 0x0000000000800000ULL
-#define IPG_TFC_FRAGCOUNT 0x000000000F000000ULL
-#define IPG_TFC_VLANTAGINSERT 0x0000000010000000ULL
-#define IPG_TFC_TFDDONE 0x0000000080000000ULL
-#define IPG_TFC_VID 0x00000FFF00000000ULL
-#define IPG_TFC_CFI 0x0000100000000000ULL
-#define IPG_TFC_USERPRIORITY 0x0000E00000000000ULL
-
-/* TFDList, FragInfo */
-#define IPG_TFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL
-#define IPG_TFI_FRAGADDR 0x000000FFFFFFFFFFULL
-#define IPG_TFI_FRAGLEN 0xFFFF000000000000ULL
-
-/* RFD data structure masks. */
-
-/* RFDList, RFS */
-#define IPG_RFS_RSVD_MASK 0x0000FFFFFFFFFFFFULL
-#define IPG_RFS_RXFRAMELEN 0x000000000000FFFFULL
-#define IPG_RFS_RXFIFOOVERRUN 0x0000000000010000ULL
-#define IPG_RFS_RXRUNTFRAME 0x0000000000020000ULL
-#define IPG_RFS_RXALIGNMENTERROR 0x0000000000040000ULL
-#define IPG_RFS_RXFCSERROR 0x0000000000080000ULL
-#define IPG_RFS_RXOVERSIZEDFRAME 0x0000000000100000ULL
-#define IPG_RFS_RXLENGTHERROR 0x0000000000200000ULL
-#define IPG_RFS_VLANDETECTED 0x0000000000400000ULL
-#define IPG_RFS_TCPDETECTED 0x0000000000800000ULL
-#define IPG_RFS_TCPERROR 0x0000000001000000ULL
-#define IPG_RFS_UDPDETECTED 0x0000000002000000ULL
-#define IPG_RFS_UDPERROR 0x0000000004000000ULL
-#define IPG_RFS_IPDETECTED 0x0000000008000000ULL
-#define IPG_RFS_IPERROR 0x0000000010000000ULL
-#define IPG_RFS_FRAMESTART 0x0000000020000000ULL
-#define IPG_RFS_FRAMEEND 0x0000000040000000ULL
-#define IPG_RFS_RFDDONE 0x0000000080000000ULL
-#define IPG_RFS_TCI 0x0000FFFF00000000ULL
-
-/* RFDList, FragInfo */
-#define IPG_RFI_RSVD_MASK 0xFFFF00FFFFFFFFFFULL
-#define IPG_RFI_FRAGADDR 0x000000FFFFFFFFFFULL
-#define IPG_RFI_FRAGLEN 0xFFFF000000000000ULL
-
-/* I/O Register masks. */
-
-/* RMON Statistics Mask */
-#define IPG_RZ_ALL 0x0FFFFFFF
-
-/* Statistics Mask */
-#define IPG_SM_ALL 0x0FFFFFFF
-#define IPG_SM_OCTETRCVOK_FRAMESRCVDOK 0x00000001
-#define IPG_SM_MCSTOCTETRCVDOK_MCSTFRAMESRCVDOK 0x00000002
-#define IPG_SM_BCSTOCTETRCVDOK_BCSTFRAMESRCVDOK 0x00000004
-#define IPG_SM_RXJUMBOFRAMES 0x00000008
-#define IPG_SM_TCPCHECKSUMERRORS 0x00000010
-#define IPG_SM_IPCHECKSUMERRORS 0x00000020
-#define IPG_SM_UDPCHECKSUMERRORS 0x00000040
-#define IPG_SM_MACCONTROLFRAMESRCVD 0x00000080
-#define IPG_SM_FRAMESTOOLONGERRORS 0x00000100
-#define IPG_SM_INRANGELENGTHERRORS 0x00000200
-#define IPG_SM_FRAMECHECKSEQERRORS 0x00000400
-#define IPG_SM_FRAMESLOSTRXERRORS 0x00000800
-#define IPG_SM_OCTETXMTOK_FRAMESXMTOK 0x00001000
-#define IPG_SM_MCSTOCTETXMTOK_MCSTFRAMESXMTDOK 0x00002000
-#define IPG_SM_BCSTOCTETXMTOK_BCSTFRAMESXMTDOK 0x00004000
-#define IPG_SM_FRAMESWDEFERREDXMT 0x00008000
-#define IPG_SM_LATECOLLISIONS 0x00010000
-#define IPG_SM_MULTICOLFRAMES 0x00020000
-#define IPG_SM_SINGLECOLFRAMES 0x00040000
-#define IPG_SM_TXJUMBOFRAMES 0x00080000
-#define IPG_SM_CARRIERSENSEERRORS 0x00100000
-#define IPG_SM_MACCONTROLFRAMESXMTD 0x00200000
-#define IPG_SM_FRAMESABORTXSCOLLS 0x00400000
-#define IPG_SM_FRAMESWEXDEFERAL 0x00800000
-
-/* Countdown */
-#define IPG_CD_RSVD_MASK 0x0700FFFF
-#define IPG_CD_COUNT 0x0000FFFF
-#define IPG_CD_COUNTDOWNSPEED 0x01000000
-#define IPG_CD_COUNTDOWNMODE 0x02000000
-#define IPG_CD_COUNTINTENABLED 0x04000000
-
-/* TxDMABurstThresh */
-#define IPG_TB_RSVD_MASK 0xFF
-
-/* TxDMAUrgentThresh */
-#define IPG_TU_RSVD_MASK 0xFF
-
-/* TxDMAPollPeriod */
-#define IPG_TP_RSVD_MASK 0xFF
-
-/* RxDMAUrgentThresh */
-#define IPG_RU_RSVD_MASK 0xFF
-
-/* RxDMAPollPeriod */
-#define IPG_RP_RSVD_MASK 0xFF
-
-/* ReceiveMode */
-#define IPG_RM_RSVD_MASK 0x3F
-#define IPG_RM_RECEIVEUNICAST 0x01
-#define IPG_RM_RECEIVEMULTICAST 0x02
-#define IPG_RM_RECEIVEBROADCAST 0x04
-#define IPG_RM_RECEIVEALLFRAMES 0x08
-#define IPG_RM_RECEIVEMULTICASTHASH 0x10
-#define IPG_RM_RECEIVEIPMULTICAST 0x20
-
-/* PhySet */
-#define IPG_PS_MEM_LENB9B 0x01
-#define IPG_PS_MEM_LEN9 0x02
-#define IPG_PS_NON_COMPDET 0x04
-
-/* PhyCtrl */
-#define IPG_PC_RSVD_MASK 0xFF
-#define IPG_PC_MGMTCLK_LO 0x00
-#define IPG_PC_MGMTCLK_HI 0x01
-#define IPG_PC_MGMTCLK 0x01
-#define IPG_PC_MGMTDATA 0x02
-#define IPG_PC_MGMTDIR 0x04
-#define IPG_PC_DUPLEX_POLARITY 0x08
-#define IPG_PC_DUPLEX_STATUS 0x10
-#define IPG_PC_LINK_POLARITY 0x20
-#define IPG_PC_LINK_SPEED 0xC0
-#define IPG_PC_LINK_SPEED_10MBPS 0x40
-#define IPG_PC_LINK_SPEED_100MBPS 0x80
-#define IPG_PC_LINK_SPEED_1000MBPS 0xC0
-
-/* DMACtrl */
-#define IPG_DC_RSVD_MASK 0xC07D9818
-#define IPG_DC_RX_DMA_COMPLETE 0x00000008
-#define IPG_DC_RX_DMA_POLL_NOW 0x00000010
-#define IPG_DC_TX_DMA_COMPLETE 0x00000800
-#define IPG_DC_TX_DMA_POLL_NOW 0x00001000
-#define IPG_DC_TX_DMA_IN_PROG 0x00008000
-#define IPG_DC_RX_EARLY_DISABLE 0x00010000
-#define IPG_DC_MWI_DISABLE 0x00040000
-#define IPG_DC_TX_WRITE_BACK_DISABLE 0x00080000
-#define IPG_DC_TX_BURST_LIMIT 0x00700000
-#define IPG_DC_TARGET_ABORT 0x40000000
-#define IPG_DC_MASTER_ABORT 0x80000000
-
-/* ASICCtrl */
-#define IPG_AC_RSVD_MASK 0x07FFEFF2
-#define IPG_AC_EXP_ROM_SIZE 0x00000002
-#define IPG_AC_PHY_SPEED10 0x00000010
-#define IPG_AC_PHY_SPEED100 0x00000020
-#define IPG_AC_PHY_SPEED1000 0x00000040
-#define IPG_AC_PHY_MEDIA 0x00000080
-#define IPG_AC_FORCED_CFG 0x00000700
-#define IPG_AC_D3RESETDISABLE 0x00000800
-#define IPG_AC_SPEED_UP_MODE 0x00002000
-#define IPG_AC_LED_MODE 0x00004000
-#define IPG_AC_RST_OUT_POLARITY 0x00008000
-#define IPG_AC_GLOBAL_RESET 0x00010000
-#define IPG_AC_RX_RESET 0x00020000
-#define IPG_AC_TX_RESET 0x00040000
-#define IPG_AC_DMA 0x00080000
-#define IPG_AC_FIFO 0x00100000
-#define IPG_AC_NETWORK 0x00200000
-#define IPG_AC_HOST 0x00400000
-#define IPG_AC_AUTO_INIT 0x00800000
-#define IPG_AC_RST_OUT 0x01000000
-#define IPG_AC_INT_REQUEST 0x02000000
-#define IPG_AC_RESET_BUSY 0x04000000
-#define IPG_AC_LED_SPEED 0x08000000
-#define IPG_AC_LED_MODE_BIT_1 0x20000000
-
-/* EepromCtrl */
-#define IPG_EC_RSVD_MASK 0x83FF
-#define IPG_EC_EEPROM_ADDR 0x00FF
-#define IPG_EC_EEPROM_OPCODE 0x0300
-#define IPG_EC_EEPROM_SUBCOMMAD 0x0000
-#define IPG_EC_EEPROM_WRITEOPCODE 0x0100
-#define IPG_EC_EEPROM_READOPCODE 0x0200
-#define IPG_EC_EEPROM_ERASEOPCODE 0x0300
-#define IPG_EC_EEPROM_BUSY 0x8000
-
-/* FIFOCtrl */
-#define IPG_FC_RSVD_MASK 0xC001
-#define IPG_FC_RAM_TEST_MODE 0x0001
-#define IPG_FC_TRANSMITTING 0x4000
-#define IPG_FC_RECEIVING 0x8000
-
-/* TxStatus */
-#define IPG_TS_RSVD_MASK 0xFFFF00DD
-#define IPG_TS_TX_ERROR 0x00000001
-#define IPG_TS_LATE_COLLISION 0x00000004
-#define IPG_TS_TX_MAX_COLL 0x00000008
-#define IPG_TS_TX_UNDERRUN 0x00000010
-#define IPG_TS_TX_IND_REQD 0x00000040
-#define IPG_TS_TX_COMPLETE 0x00000080
-#define IPG_TS_TX_FRAMEID 0xFFFF0000
-
-/* WakeEvent */
-#define IPG_WE_WAKE_PKT_ENABLE 0x01
-#define IPG_WE_MAGIC_PKT_ENABLE 0x02
-#define IPG_WE_LINK_EVT_ENABLE 0x04
-#define IPG_WE_WAKE_POLARITY 0x08
-#define IPG_WE_WAKE_PKT_EVT 0x10
-#define IPG_WE_MAGIC_PKT_EVT 0x20
-#define IPG_WE_LINK_EVT 0x40
-#define IPG_WE_WOL_ENABLE 0x80
-
-/* IntEnable */
-#define IPG_IE_RSVD_MASK 0x1FFE
-#define IPG_IE_HOST_ERROR 0x0002
-#define IPG_IE_TX_COMPLETE 0x0004
-#define IPG_IE_MAC_CTRL_FRAME 0x0008
-#define IPG_IE_RX_COMPLETE 0x0010
-#define IPG_IE_RX_EARLY 0x0020
-#define IPG_IE_INT_REQUESTED 0x0040
-#define IPG_IE_UPDATE_STATS 0x0080
-#define IPG_IE_LINK_EVENT 0x0100
-#define IPG_IE_TX_DMA_COMPLETE 0x0200
-#define IPG_IE_RX_DMA_COMPLETE 0x0400
-#define IPG_IE_RFD_LIST_END 0x0800
-#define IPG_IE_RX_DMA_PRIORITY 0x1000
-
-/* IntStatus */
-#define IPG_IS_RSVD_MASK 0x1FFF
-#define IPG_IS_INTERRUPT_STATUS 0x0001
-#define IPG_IS_HOST_ERROR 0x0002
-#define IPG_IS_TX_COMPLETE 0x0004
-#define IPG_IS_MAC_CTRL_FRAME 0x0008
-#define IPG_IS_RX_COMPLETE 0x0010
-#define IPG_IS_RX_EARLY 0x0020
-#define IPG_IS_INT_REQUESTED 0x0040
-#define IPG_IS_UPDATE_STATS 0x0080
-#define IPG_IS_LINK_EVENT 0x0100
-#define IPG_IS_TX_DMA_COMPLETE 0x0200
-#define IPG_IS_RX_DMA_COMPLETE 0x0400
-#define IPG_IS_RFD_LIST_END 0x0800
-#define IPG_IS_RX_DMA_PRIORITY 0x1000
-
-/* MACCtrl */
-#define IPG_MC_RSVD_MASK 0x7FE33FA3
-#define IPG_MC_IFS_SELECT 0x00000003
-#define IPG_MC_IFS_4352BIT 0x00000003
-#define IPG_MC_IFS_1792BIT 0x00000002
-#define IPG_MC_IFS_1024BIT 0x00000001
-#define IPG_MC_IFS_96BIT 0x00000000
-#define IPG_MC_DUPLEX_SELECT 0x00000020
-#define IPG_MC_DUPLEX_SELECT_FD 0x00000020
-#define IPG_MC_DUPLEX_SELECT_HD 0x00000000
-#define IPG_MC_TX_FLOW_CONTROL_ENABLE 0x00000080
-#define IPG_MC_RX_FLOW_CONTROL_ENABLE 0x00000100
-#define IPG_MC_RCV_FCS 0x00000200
-#define IPG_MC_FIFO_LOOPBACK 0x00000400
-#define IPG_MC_MAC_LOOPBACK 0x00000800
-#define IPG_MC_AUTO_VLAN_TAGGING 0x00001000
-#define IPG_MC_AUTO_VLAN_UNTAGGING 0x00002000
-#define IPG_MC_COLLISION_DETECT 0x00010000
-#define IPG_MC_CARRIER_SENSE 0x00020000
-#define IPG_MC_STATISTICS_ENABLE 0x00200000
-#define IPG_MC_STATISTICS_DISABLE 0x00400000
-#define IPG_MC_STATISTICS_ENABLED 0x00800000
-#define IPG_MC_TX_ENABLE 0x01000000
-#define IPG_MC_TX_DISABLE 0x02000000
-#define IPG_MC_TX_ENABLED 0x04000000
-#define IPG_MC_RX_ENABLE 0x08000000
-#define IPG_MC_RX_DISABLE 0x10000000
-#define IPG_MC_RX_ENABLED 0x20000000
-#define IPG_MC_PAUSED 0x40000000
-
-/*
- * Tune
- */
-
-/* Assign IPG_APPEND_FCS_ON_TX > 0 for auto FCS append on TX. */
-#define IPG_APPEND_FCS_ON_TX 1
-
-/* Assign IPG_APPEND_FCS_ON_TX > 0 for auto FCS strip on RX. */
-#define IPG_STRIP_FCS_ON_RX 1
-
-/* Assign IPG_DROP_ON_RX_ETH_ERRORS > 0 to drop RX frames with
- * Ethernet errors.
- */
-#define IPG_DROP_ON_RX_ETH_ERRORS 1
-
-/* Assign IPG_INSERT_MANUAL_VLAN_TAG > 0 to insert VLAN tags manually
- * (via TFC).
- */
-#define IPG_INSERT_MANUAL_VLAN_TAG 0
-
-/* Assign IPG_ADD_IPCHECKSUM_ON_TX > 0 for auto IP checksum on TX. */
-#define IPG_ADD_IPCHECKSUM_ON_TX 0
-
-/* Assign IPG_ADD_TCPCHECKSUM_ON_TX > 0 for auto TCP checksum on TX.
- * DO NOT USE FOR SILICON REVISIONS B3 AND EARLIER.
- */
-#define IPG_ADD_TCPCHECKSUM_ON_TX 0
-
-/* Assign IPG_ADD_UDPCHECKSUM_ON_TX > 0 for auto UDP checksum on TX.
- * DO NOT USE FOR SILICON REVISIONS B3 AND EARLIER.
- */
-#define IPG_ADD_UDPCHECKSUM_ON_TX 0
-
-/* If inserting VLAN tags manually, assign the IPG_MANUAL_VLAN_xx
- * constants as desired.
- */
-#define IPG_MANUAL_VLAN_VID 0xABC
-#define IPG_MANUAL_VLAN_CFI 0x1
-#define IPG_MANUAL_VLAN_USERPRIORITY 0x5
-
-#define IPG_IO_REG_RANGE 0xFF
-#define IPG_MEM_REG_RANGE 0x154
-#define IPG_DRIVER_NAME "Sundance Technology IPG Triple-Speed Ethernet"
-#define IPG_NIC_PHY_ADDRESS 0x01
-#define IPG_DMALIST_ALIGN_PAD 0x07
-#define IPG_MULTICAST_HASHTABLE_SIZE 0x40
-
-/* Number of milliseconds to wait after issuing a software reset.
- * 0x05 <= IPG_AC_RESETWAIT to account for proper 10Mbps operation.
- */
-#define IPG_AC_RESETWAIT 0x05
-
-/* Number of IPG_AC_RESETWAIT timeperiods before declaring timeout. */
-#define IPG_AC_RESET_TIMEOUT 0x0A
-
-/* Minimum number of nanoseconds used to toggle MDC clock during
- * MII/GMII register access.
- */
-#define IPG_PC_PHYCTRLWAIT_NS 200
-
-#define IPG_TFDLIST_LENGTH 0x100
-
-/* Number of frames between TxDMAComplete interrupt.
- * 0 < IPG_FRAMESBETWEENTXDMACOMPLETES <= IPG_TFDLIST_LENGTH
- */
-#define IPG_FRAMESBETWEENTXDMACOMPLETES 0x1
-
-#define IPG_RFDLIST_LENGTH 0x100
-
-/* Maximum number of RFDs to process per interrupt.
- * 1 < IPG_MAXRFDPROCESS_COUNT < IPG_RFDLIST_LENGTH
- */
-#define IPG_MAXRFDPROCESS_COUNT 0x80
-
-/* Minimum margin between last freed RFD, and current RFD.
- * 1 < IPG_MINUSEDRFDSTOFREE < IPG_RFDLIST_LENGTH
- */
-#define IPG_MINUSEDRFDSTOFREE 0x80
-
-/* specify the jumbo frame maximum size
- * per unit is 0x600 (the rx_buffer size that one RFD can carry)
- */
-#define MAX_JUMBOSIZE 0x8 /* max is 12K */
-
-/* Key register values loaded at driver start up. */
-
-/* TXDMAPollPeriod is specified in 320ns increments.
- *
- * Value Time
- * ---------------------
- * 0x00-0x01 320ns
- * 0x03 ~1us
- * 0x1F ~10us
- * 0xFF ~82us
- */
-#define IPG_TXDMAPOLLPERIOD_VALUE 0x26
-
-/* TxDMAUrgentThresh specifies the minimum amount of
- * data in the transmit FIFO before asserting an
- * urgent transmit DMA request.
- *
- * Value Min TxFIFO occupied space before urgent TX request
- * ---------------------------------------------------------------
- * 0x00-0x04 128 bytes (1024 bits)
- * 0x27 1248 bytes (~10000 bits)
- * 0x30 1536 bytes (12288 bits)
- * 0xFF 8192 bytes (65535 bits)
- */
-#define IPG_TXDMAURGENTTHRESH_VALUE 0x04
-
-/* TxDMABurstThresh specifies the minimum amount of
- * free space in the transmit FIFO before asserting an
- * transmit DMA request.
- *
- * Value Min TxFIFO free space before TX request
- * ----------------------------------------------------
- * 0x00-0x08 256 bytes
- * 0x30 1536 bytes
- * 0xFF 8192 bytes
- */
-#define IPG_TXDMABURSTTHRESH_VALUE 0x30
-
-/* RXDMAPollPeriod is specified in 320ns increments.
- *
- * Value Time
- * ---------------------
- * 0x00-0x01 320ns
- * 0x03 ~1us
- * 0x1F ~10us
- * 0xFF ~82us
- */
-#define IPG_RXDMAPOLLPERIOD_VALUE 0x01
-
-/* RxDMAUrgentThresh specifies the minimum amount of
- * free space within the receive FIFO before asserting
- * a urgent receive DMA request.
- *
- * Value Min RxFIFO free space before urgent RX request
- * ---------------------------------------------------------------
- * 0x00-0x04 128 bytes (1024 bits)
- * 0x27 1248 bytes (~10000 bits)
- * 0x30 1536 bytes (12288 bits)
- * 0xFF 8192 bytes (65535 bits)
- */
-#define IPG_RXDMAURGENTTHRESH_VALUE 0x30
-
-/* RxDMABurstThresh specifies the minimum amount of
- * occupied space within the receive FIFO before asserting
- * a receive DMA request.
- *
- * Value Min TxFIFO free space before TX request
- * ----------------------------------------------------
- * 0x00-0x08 256 bytes
- * 0x30 1536 bytes
- * 0xFF 8192 bytes
- */
-#define IPG_RXDMABURSTTHRESH_VALUE 0x30
-
-/* FlowOnThresh specifies the maximum amount of occupied
- * space in the receive FIFO before a PAUSE frame with
- * maximum pause time transmitted.
- *
- * Value Max RxFIFO occupied space before PAUSE
- * ---------------------------------------------------
- * 0x0000 0 bytes
- * 0x0740 29,696 bytes
- * 0x07FF 32,752 bytes
- */
-#define IPG_FLOWONTHRESH_VALUE 0x0740
-
-/* FlowOffThresh specifies the minimum amount of occupied
- * space in the receive FIFO before a PAUSE frame with
- * zero pause time is transmitted.
- *
- * Value Max RxFIFO occupied space before PAUSE
- * ---------------------------------------------------
- * 0x0000 0 bytes
- * 0x00BF 3056 bytes
- * 0x07FF 32,752 bytes
- */
-#define IPG_FLOWOFFTHRESH_VALUE 0x00BF
-
-/*
- * Miscellaneous macros.
- */
-
-/* Macros for printing debug statements. */
-#ifdef IPG_DEBUG
-# define IPG_DEBUG_MSG(fmt, args...) \
-do { \
- if (0) \
- printk(KERN_DEBUG "IPG: " fmt, ##args); \
-} while (0)
-# define IPG_DDEBUG_MSG(fmt, args...) \
- printk(KERN_DEBUG "IPG: " fmt, ##args)
-# define IPG_DUMPRFDLIST(args) ipg_dump_rfdlist(args)
-# define IPG_DUMPTFDLIST(args) ipg_dump_tfdlist(args)
-#else
-# define IPG_DEBUG_MSG(fmt, args...) \
-do { \
- if (0) \
- printk(KERN_DEBUG "IPG: " fmt, ##args); \
-} while (0)
-# define IPG_DDEBUG_MSG(fmt, args...) \
-do { \
- if (0) \
- printk(KERN_DEBUG "IPG: " fmt, ##args); \
-} while (0)
-# define IPG_DUMPRFDLIST(args)
-# define IPG_DUMPTFDLIST(args)
-#endif
-
-/*
- * End miscellaneous macros.
- */
-
-/* Transmit Frame Descriptor. The IPG supports 15 fragments,
- * however Linux requires only a single fragment. Note, each
- * TFD field is 64 bits wide.
- */
-struct ipg_tx {
- __le64 next_desc;
- __le64 tfc;
- __le64 frag_info;
-};
-
-/* Receive Frame Descriptor. Note, each RFD field is 64 bits wide.
- */
-struct ipg_rx {
- __le64 next_desc;
- __le64 rfs;
- __le64 frag_info;
-};
-
-struct ipg_jumbo {
- int found_start;
- int current_size;
- struct sk_buff *skb;
-};
-
-/* Structure of IPG NIC specific data. */
-struct ipg_nic_private {
- void __iomem *ioaddr;
- struct ipg_tx *txd;
- struct ipg_rx *rxd;
- dma_addr_t txd_map;
- dma_addr_t rxd_map;
- struct sk_buff *tx_buff[IPG_TFDLIST_LENGTH];
- struct sk_buff *rx_buff[IPG_RFDLIST_LENGTH];
- unsigned int tx_current;
- unsigned int tx_dirty;
- unsigned int rx_current;
- unsigned int rx_dirty;
- bool is_jumbo;
- struct ipg_jumbo jumbo;
- unsigned long rxfrag_size;
- unsigned long rxsupport_size;
- unsigned long max_rxframe_size;
- unsigned int rx_buf_sz;
- struct pci_dev *pdev;
- struct net_device *dev;
- struct net_device_stats stats;
- spinlock_t lock;
- int tenmbpsmode;
-
- u16 led_mode;
- u16 station_addr[3]; /* Station Address in EEPROM Reg 0x10..0x12 */
-
- struct mutex mii_mutex;
- struct mii_if_info mii_if;
- int reset_current_tfd;
-#ifdef IPG_DEBUG
- int RFDlistendCount;
- int RFDListCheckedCount;
- int EmptyRFDListCount;
-#endif
- struct delayed_work task;
-};
-
-#endif /* __LINUX_IPG_H */
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 85f1b1e..31c491e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -892,9 +892,10 @@
dev->caps.qp1_proxy[i - 1] = func_cap.qp1_proxy_qpn;
dev->caps.port_mask[i] = dev->caps.port_type[i];
dev->caps.phys_port_id[i] = func_cap.phys_port_id;
- if (mlx4_get_slave_pkey_gid_tbl_len(dev, i,
- &dev->caps.gid_table_len[i],
- &dev->caps.pkey_table_len[i]))
+ err = mlx4_get_slave_pkey_gid_tbl_len(dev, i,
+ &dev->caps.gid_table_len[i],
+ &dev->caps.pkey_table_len[i]);
+ if (err)
goto err_mem;
}
@@ -906,6 +907,7 @@
dev->caps.uar_page_size * dev->caps.num_uars,
(unsigned long long)
pci_resource_len(dev->persist->pdev, 2));
+ err = -ENOMEM;
goto err_mem;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 9813d34..6fec3e9 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -4952,26 +4952,41 @@
struct res_counter *counter;
struct res_counter *tmp;
int err;
- int index;
+ int *counters_arr = NULL;
+ int i, j;
err = move_all_busy(dev, slave, RES_COUNTER);
if (err)
mlx4_warn(dev, "rem_slave_counters: Could not move all counters - too busy for slave %d\n",
slave);
- spin_lock_irq(mlx4_tlock(dev));
- list_for_each_entry_safe(counter, tmp, counter_list, com.list) {
- if (counter->com.owner == slave) {
- index = counter->com.res_id;
- rb_erase(&counter->com.node,
- &tracker->res_tree[RES_COUNTER]);
- list_del(&counter->com.list);
- kfree(counter);
- __mlx4_counter_free(dev, index);
+ counters_arr = kmalloc_array(dev->caps.max_counters,
+ sizeof(*counters_arr), GFP_KERNEL);
+ if (!counters_arr)
+ return;
+
+ do {
+ i = 0;
+ j = 0;
+ spin_lock_irq(mlx4_tlock(dev));
+ list_for_each_entry_safe(counter, tmp, counter_list, com.list) {
+ if (counter->com.owner == slave) {
+ counters_arr[i++] = counter->com.res_id;
+ rb_erase(&counter->com.node,
+ &tracker->res_tree[RES_COUNTER]);
+ list_del(&counter->com.list);
+ kfree(counter);
+ }
+ }
+ spin_unlock_irq(mlx4_tlock(dev));
+
+ while (j < i) {
+ __mlx4_counter_free(dev, counters_arr[j++]);
mlx4_release_resource(dev, slave, RES_COUNTER, 1, 0);
}
- }
- spin_unlock_irq(mlx4_tlock(dev));
+ } while (i);
+
+ kfree(counters_arr);
}
static void rem_slave_xrcdns(struct mlx4_dev *dev, int slave)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index f2ae62d..22e72bf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -334,9 +334,15 @@
#define MLX5E_TX_SKB_CB(__skb) ((struct mlx5e_tx_skb_cb *)__skb->cb)
+enum mlx5e_dma_map_type {
+ MLX5E_DMA_MAP_SINGLE,
+ MLX5E_DMA_MAP_PAGE
+};
+
struct mlx5e_sq_dma {
- dma_addr_t addr;
- u32 size;
+ dma_addr_t addr;
+ u32 size;
+ enum mlx5e_dma_map_type type;
};
enum {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 5fc4d2d..1e52db3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1332,6 +1332,42 @@
return err;
}
+static int mlx5e_refresh_tir_self_loopback_enable(struct mlx5_core_dev *mdev,
+ u32 tirn)
+{
+ void *in;
+ int inlen;
+ int err;
+
+ inlen = MLX5_ST_SZ_BYTES(modify_tir_in);
+ in = mlx5_vzalloc(inlen);
+ if (!in)
+ return -ENOMEM;
+
+ MLX5_SET(modify_tir_in, in, bitmask.self_lb_en, 1);
+
+ err = mlx5_core_modify_tir(mdev, tirn, in, inlen);
+
+ kvfree(in);
+
+ return err;
+}
+
+static int mlx5e_refresh_tirs_self_loopback_enable(struct mlx5e_priv *priv)
+{
+ int err;
+ int i;
+
+ for (i = 0; i < MLX5E_NUM_TT; i++) {
+ err = mlx5e_refresh_tir_self_loopback_enable(priv->mdev,
+ priv->tirn[i]);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
static int mlx5e_set_dev_port_mtu(struct net_device *netdev)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
@@ -1376,6 +1412,13 @@
goto err_clear_state_opened_flag;
}
+ err = mlx5e_refresh_tirs_self_loopback_enable(priv);
+ if (err) {
+ netdev_err(netdev, "%s: mlx5e_refresh_tirs_self_loopback_enable failed, %d\n",
+ __func__, err);
+ goto err_close_channels;
+ }
+
mlx5e_update_carrier(priv);
mlx5e_redirect_rqts(priv);
@@ -1383,6 +1426,8 @@
return 0;
+err_close_channels:
+ mlx5e_close_channels(priv);
err_clear_state_opened_flag:
clear_bit(MLX5E_STATE_OPENED, &priv->state);
return err;
@@ -1856,6 +1901,8 @@
mlx5_query_port_max_mtu(mdev, &max_mtu, 1);
+ max_mtu = MLX5E_HW2SW_MTU(max_mtu);
+
if (new_mtu > max_mtu) {
netdev_err(netdev,
"%s: Bad MTU (%d) > (%d) Max\n",
@@ -1909,6 +1956,9 @@
"Not creating net device, some required device capabilities are missing\n");
return -ENOTSUPP;
}
+ if (!MLX5_CAP_ETH(mdev, self_lb_en_modifiable))
+ mlx5_core_warn(mdev, "Self loop back prevention is not supported\n");
+
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index cd8f85a..1341b1d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -61,41 +61,49 @@
}
}
-static void mlx5e_dma_pop_last_pushed(struct mlx5e_sq *sq, dma_addr_t *addr,
- u32 *size)
+static inline void mlx5e_tx_dma_unmap(struct device *pdev,
+ struct mlx5e_sq_dma *dma)
{
- sq->dma_fifo_pc--;
- *addr = sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].addr;
- *size = sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].size;
+ switch (dma->type) {
+ case MLX5E_DMA_MAP_SINGLE:
+ dma_unmap_single(pdev, dma->addr, dma->size, DMA_TO_DEVICE);
+ break;
+ case MLX5E_DMA_MAP_PAGE:
+ dma_unmap_page(pdev, dma->addr, dma->size, DMA_TO_DEVICE);
+ break;
+ default:
+ WARN_ONCE(true, "mlx5e_tx_dma_unmap unknown DMA type!\n");
+ }
+}
+
+static inline void mlx5e_dma_push(struct mlx5e_sq *sq,
+ dma_addr_t addr,
+ u32 size,
+ enum mlx5e_dma_map_type map_type)
+{
+ sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].addr = addr;
+ sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].size = size;
+ sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].type = map_type;
+ sq->dma_fifo_pc++;
+}
+
+static inline struct mlx5e_sq_dma *mlx5e_dma_get(struct mlx5e_sq *sq, u32 i)
+{
+ return &sq->dma_fifo[i & sq->dma_fifo_mask];
}
static void mlx5e_dma_unmap_wqe_err(struct mlx5e_sq *sq, struct sk_buff *skb)
{
- dma_addr_t addr;
- u32 size;
int i;
for (i = 0; i < MLX5E_TX_SKB_CB(skb)->num_dma; i++) {
- mlx5e_dma_pop_last_pushed(sq, &addr, &size);
- dma_unmap_single(sq->pdev, addr, size, DMA_TO_DEVICE);
+ struct mlx5e_sq_dma *last_pushed_dma =
+ mlx5e_dma_get(sq, --sq->dma_fifo_pc);
+
+ mlx5e_tx_dma_unmap(sq->pdev, last_pushed_dma);
}
}
-static inline void mlx5e_dma_push(struct mlx5e_sq *sq, dma_addr_t addr,
- u32 size)
-{
- sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].addr = addr;
- sq->dma_fifo[sq->dma_fifo_pc & sq->dma_fifo_mask].size = size;
- sq->dma_fifo_pc++;
-}
-
-static inline void mlx5e_dma_get(struct mlx5e_sq *sq, u32 i, dma_addr_t *addr,
- u32 *size)
-{
- *addr = sq->dma_fifo[i & sq->dma_fifo_mask].addr;
- *size = sq->dma_fifo[i & sq->dma_fifo_mask].size;
-}
-
u16 mlx5e_select_queue(struct net_device *dev, struct sk_buff *skb,
void *accel_priv, select_queue_fallback_t fallback)
{
@@ -118,8 +126,15 @@
*/
#define MLX5E_MIN_INLINE ETH_HLEN
- if (bf && (skb_headlen(skb) <= sq->max_inline))
- return skb_headlen(skb);
+ if (bf) {
+ u16 ihs = skb_headlen(skb);
+
+ if (skb_vlan_tag_present(skb))
+ ihs += VLAN_HLEN;
+
+ if (ihs <= sq->max_inline)
+ return skb_headlen(skb);
+ }
return MLX5E_MIN_INLINE;
}
@@ -218,7 +233,7 @@
dseg->lkey = sq->mkey_be;
dseg->byte_count = cpu_to_be32(headlen);
- mlx5e_dma_push(sq, dma_addr, headlen);
+ mlx5e_dma_push(sq, dma_addr, headlen, MLX5E_DMA_MAP_SINGLE);
MLX5E_TX_SKB_CB(skb)->num_dma++;
dseg++;
@@ -237,7 +252,7 @@
dseg->lkey = sq->mkey_be;
dseg->byte_count = cpu_to_be32(fsz);
- mlx5e_dma_push(sq, dma_addr, fsz);
+ mlx5e_dma_push(sq, dma_addr, fsz, MLX5E_DMA_MAP_PAGE);
MLX5E_TX_SKB_CB(skb)->num_dma++;
dseg++;
@@ -353,13 +368,10 @@
}
for (j = 0; j < MLX5E_TX_SKB_CB(skb)->num_dma; j++) {
- dma_addr_t addr;
- u32 size;
+ struct mlx5e_sq_dma *dma =
+ mlx5e_dma_get(sq, dma_fifo_cc++);
- mlx5e_dma_get(sq, dma_fifo_cc, &addr, &size);
- dma_fifo_cc++;
- dma_unmap_single(sq->pdev, addr, size,
- DMA_TO_DEVICE);
+ mlx5e_tx_dma_unmap(sq->pdev, dma);
}
npkts++;
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index b4f2123..79ef799 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7429,15 +7429,15 @@
rtl8169_rx_vlan_tag(desc, skb);
+ if (skb->pkt_type == PACKET_MULTICAST)
+ dev->stats.multicast++;
+
napi_gro_receive(&tp->napi, skb);
u64_stats_update_begin(&tp->rx_stats.syncp);
tp->rx_stats.packets++;
tp->rx_stats.bytes += pkt_size;
u64_stats_update_end(&tp->rx_stats.syncp);
-
- if (skb->pkt_type == PACKET_MULTICAST)
- dev->stats.multicast++;
}
release_descriptor:
desc->opts2 = 0;
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index aa7b208..ee8d1ec 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -408,8 +408,6 @@
/* Interrupt enable: */
/* Frame receive */
ravb_write(ndev, RIC0_FRE0 | RIC0_FRE1, RIC0);
- /* Receive FIFO full warning */
- ravb_write(ndev, RIC1_RFWE, RIC1);
/* Receive FIFO full error, descriptor empty */
ravb_write(ndev, RIC2_QFE0 | RIC2_QFE1 | RIC2_RFFE, RIC2);
/* Frame transmitted, timestamp FIFO updated */
@@ -733,8 +731,10 @@
((tis & tic) & BIT(q))) {
if (napi_schedule_prep(&priv->napi[q])) {
/* Mask RX and TX interrupts */
- ravb_write(ndev, ric0 & ~BIT(q), RIC0);
- ravb_write(ndev, tic & ~BIT(q), TIC);
+ ric0 &= ~BIT(q);
+ tic &= ~BIT(q);
+ ravb_write(ndev, ric0, RIC0);
+ ravb_write(ndev, tic, TIC);
__napi_schedule(&priv->napi[q]);
} else {
netdev_warn(ndev,
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index d288f1c..a3c42a3 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -3422,7 +3422,7 @@
* with our request for slot reset the mmio_enabled callback will never be
* called, and the link_reset callback is not used by AER or EEH mechanisms.
*/
-static struct pci_error_handlers efx_err_handlers = {
+static const struct pci_error_handlers efx_err_handlers = {
.error_detected = efx_io_error_detected,
.slot_reset = efx_io_slot_reset,
.resume = efx_io_resume,
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index c860c90..219a99b 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -809,22 +809,17 @@
static int smsc911x_phy_reset(struct smsc911x_data *pdata)
{
- struct phy_device *phy_dev = pdata->phy_dev;
unsigned int temp;
unsigned int i = 100000;
- BUG_ON(!phy_dev);
- BUG_ON(!phy_dev->bus);
-
- SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset");
- smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET);
+ temp = smsc911x_reg_read(pdata, PMT_CTRL);
+ smsc911x_reg_write(pdata, PMT_CTRL, temp | PMT_CTRL_PHY_RST_);
do {
msleep(1);
- temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr,
- MII_BMCR);
- } while ((i--) && (temp & BMCR_RESET));
+ temp = smsc911x_reg_read(pdata, PMT_CTRL);
+ } while ((i--) && (temp & PMT_CTRL_PHY_RST_));
- if (temp & BMCR_RESET) {
+ if (unlikely(temp & PMT_CTRL_PHY_RST_)) {
SMSC_WARN(pdata, hw, "PHY reset failed to complete");
return -EIO;
}
@@ -2296,7 +2291,7 @@
}
/* Reset the LAN911x */
- if (smsc911x_soft_reset(pdata))
+ if (smsc911x_phy_reset(pdata) || smsc911x_soft_reset(pdata))
return -ENODEV;
dev->flags |= IFF_MULTICAST;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 9d89bdb..82de68b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -337,11 +337,11 @@
QSGMII_PHY_RX_SIGNAL_DETECT_EN |
QSGMII_PHY_TX_DRIVER_EN |
QSGMII_PHY_QSGMII_EN |
- 0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
- 0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
- 0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
- 0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
- 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
+ 0x4ul << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
+ 0x3ul << QSGMII_PHY_RX_DC_BIAS_OFFSET |
+ 0x1ul << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
+ 0x2ul << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
+ 0xCul << QSGMII_PHY_TX_DRV_AMP_OFFSET);
}
plat_dat->has_gmac = true;
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index ae68afd..f38696c 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -345,13 +345,6 @@
*/
VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
-#define VAL_PKT_LEN_DEF 0
-/* ValPktLen[] is used for setting the checksum offload ability of NIC.
- 0: Receive frame with invalid layer 2 length (Default)
- 1: Drop frame with invalid layer 2 length
-*/
-VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame");
-
#define WOL_OPT_DEF 0
#define WOL_OPT_MIN 0
#define WOL_OPT_MAX 7
@@ -494,7 +487,6 @@
velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
- velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname);
velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname);
velocity_set_int_opt(&opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
opts->numrx = (opts->numrx & ~3);
@@ -2055,8 +2047,9 @@
int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
struct sk_buff *skb;
- if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
- VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame spans multiple RDs.\n", vptr->netdev->name);
+ if (unlikely(rd->rdesc0.RSR & (RSR_STP | RSR_EDP | RSR_RL))) {
+ if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP))
+ VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame spans multiple RDs.\n", vptr->netdev->name);
stats->rx_length_errors++;
return -EINVAL;
}
@@ -2069,17 +2062,6 @@
dma_sync_single_for_cpu(vptr->dev, rd_info->skb_dma,
vptr->rx.buf_sz, DMA_FROM_DEVICE);
- /*
- * Drop frame not meeting IEEE 802.3
- */
-
- if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
- if (rd->rdesc0.RSR & RSR_RL) {
- stats->rx_length_errors++;
- return -EINVAL;
- }
- }
-
velocity_rx_csum(rd, skb);
if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
diff --git a/drivers/net/fjes/fjes_hw.c b/drivers/net/fjes/fjes_hw.c
index bb8b530..b103adb 100644
--- a/drivers/net/fjes/fjes_hw.c
+++ b/drivers/net/fjes/fjes_hw.c
@@ -599,7 +599,7 @@
FJES_CMD_REQ_RES_CODE_BUSY) &&
(timeout > 0)) {
msleep(200 + hw->my_epid * 20);
- timeout -= (200 + hw->my_epid * 20);
+ timeout -= (200 + hw->my_epid * 20);
res_buf->unshare_buffer.length = 0;
res_buf->unshare_buffer.code = 0;
diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c
index d50887e..8c48bb2 100644
--- a/drivers/net/ipvlan/ipvlan_core.c
+++ b/drivers/net/ipvlan/ipvlan_core.c
@@ -254,7 +254,7 @@
}
}
-static int ipvlan_rcv_frame(struct ipvl_addr *addr, struct sk_buff *skb,
+static int ipvlan_rcv_frame(struct ipvl_addr *addr, struct sk_buff **pskb,
bool local)
{
struct ipvl_dev *ipvlan = addr->master;
@@ -262,6 +262,7 @@
unsigned int len;
rx_handler_result_t ret = RX_HANDLER_CONSUMED;
bool success = false;
+ struct sk_buff *skb = *pskb;
len = skb->len + ETH_HLEN;
if (unlikely(!(dev->flags & IFF_UP))) {
@@ -273,6 +274,7 @@
if (!skb)
goto out;
+ *pskb = skb;
skb->dev = dev;
skb->pkt_type = PACKET_HOST;
@@ -486,7 +488,7 @@
addr = ipvlan_addr_lookup(ipvlan->port, lyr3h, addr_type, true);
if (addr)
- return ipvlan_rcv_frame(addr, skb, true);
+ return ipvlan_rcv_frame(addr, &skb, true);
out:
skb->dev = ipvlan->phy_dev;
@@ -506,7 +508,7 @@
if (lyr3h) {
addr = ipvlan_addr_lookup(ipvlan->port, lyr3h, addr_type, true);
if (addr)
- return ipvlan_rcv_frame(addr, skb, true);
+ return ipvlan_rcv_frame(addr, &skb, true);
}
skb = skb_share_check(skb, GFP_ATOMIC);
if (!skb)
@@ -589,7 +591,7 @@
addr = ipvlan_addr_lookup(port, lyr3h, addr_type, true);
if (addr)
- ret = ipvlan_rcv_frame(addr, skb, false);
+ ret = ipvlan_rcv_frame(addr, pskb, false);
out:
return ret;
@@ -626,7 +628,7 @@
addr = ipvlan_addr_lookup(port, lyr3h, addr_type, true);
if (addr)
- ret = ipvlan_rcv_frame(addr, skb, false);
+ ret = ipvlan_rcv_frame(addr, pskb, false);
}
return ret;
@@ -651,5 +653,5 @@
WARN_ONCE(true, "ipvlan_handle_frame() called for mode = [%hx]\n",
port->mode);
kfree_skb(skb);
- return NET_RX_DROP;
+ return RX_HANDLER_CONSUMED;
}
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 86f6c62..06c8bfe 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -415,6 +415,7 @@
skb = ip_check_defrag(dev_net(skb->dev), skb, IP_DEFRAG_MACVLAN);
if (!skb)
return RX_HANDLER_CONSUMED;
+ *pskb = skb;
eth = eth_hdr(skb);
macvlan_forward_source(skb, port, eth->h_source);
src = macvlan_hash_lookup(port, eth->h_source);
@@ -456,6 +457,7 @@
goto out;
}
+ *pskb = skb;
skb->dev = dev;
skb->pkt_type = PACKET_HOST;
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index fabf11d..2d020a3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -308,6 +308,8 @@
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .ack_interrupt = at803x_ack_interrupt,
+ .config_intr = at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
@@ -327,6 +329,8 @@
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .ack_interrupt = at803x_ack_interrupt,
+ .config_intr = at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 5de8d58..0240552 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1154,6 +1154,21 @@
.driver = { .owner = THIS_MODULE },
},
{
+ .phy_id = MARVELL_PHY_ID_88E1540,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "Marvell 88E1540",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1510_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .resume = &genphy_resume,
+ .suspend = &genphy_suspend,
+ .driver = { .owner = THIS_MODULE },
+ },
+ {
.phy_id = MARVELL_PHY_ID_88E3016,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E3016",
@@ -1186,6 +1201,7 @@
{ MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E1540, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
{ }
};
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index adb48ab..48ce6ef 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -863,6 +863,9 @@
needs_aneg = true;
break;
case PHY_NOLINK:
+ if (phy_interrupt_is_valid(phydev))
+ break;
+
err = phy_read_status(phydev);
if (err)
break;
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 76cad71..dd295db 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -66,6 +66,7 @@
#define PHY_ID_VSC8244 0x000fc6c0
#define PHY_ID_VSC8514 0x00070670
#define PHY_ID_VSC8574 0x000704a0
+#define PHY_ID_VSC8601 0x00070420
#define PHY_ID_VSC8662 0x00070660
#define PHY_ID_VSC8221 0x000fc550
#define PHY_ID_VSC8211 0x000fc4b0
@@ -133,7 +134,8 @@
(phydev->drv->phy_id == PHY_ID_VSC8234 ||
phydev->drv->phy_id == PHY_ID_VSC8244 ||
phydev->drv->phy_id == PHY_ID_VSC8514 ||
- phydev->drv->phy_id == PHY_ID_VSC8574) ?
+ phydev->drv->phy_id == PHY_ID_VSC8574 ||
+ phydev->drv->phy_id == PHY_ID_VSC8601) ?
MII_VSC8244_IMASK_MASK :
MII_VSC8221_IMASK_MASK);
else {
@@ -272,6 +274,18 @@
.config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
}, {
+ .phy_id = PHY_ID_VSC8601,
+ .name = "Vitesse VSC8601",
+ .phy_id_mask = 0x000ffff0,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &genphy_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+}, {
.phy_id = PHY_ID_VSC8662,
.name = "Vitesse VSC8662",
.phy_id_mask = 0x000ffff0,
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index c78d3cb..3da70bf 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -696,6 +696,11 @@
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
.driver_info = (kernel_ulong_t) &wwan_info,
}, {
+ /* Dell DW5580 modules */
+ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = (kernel_ulong_t)&wwan_info,
+}, {
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 46f4cad..899ea42 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2157,12 +2157,13 @@
if (!netdev_mc_empty(netdev)) {
new_table = vmxnet3_copy_mc(netdev);
if (new_table) {
- rxConf->mfTableLen = cpu_to_le16(
- netdev_mc_count(netdev) * ETH_ALEN);
+ size_t sz = netdev_mc_count(netdev) * ETH_ALEN;
+
+ rxConf->mfTableLen = cpu_to_le16(sz);
new_table_pa = dma_map_single(
&adapter->pdev->dev,
new_table,
- rxConf->mfTableLen,
+ sz,
PCI_DMA_TODEVICE);
}
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index 3f859a5..4c58c83 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -69,10 +69,10 @@
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.4.3.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.4.4.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01040300
+#define VMXNET3_DRIVER_VERSION_NUM 0x01040400
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c
index e0b7b95..9202d1a 100644
--- a/drivers/nvme/host/lightnvm.c
+++ b/drivers/nvme/host/lightnvm.c
@@ -93,7 +93,7 @@
__le16 cdw14[6];
};
-struct nvme_nvm_bbtbl {
+struct nvme_nvm_getbbtbl {
__u8 opcode;
__u8 flags;
__u16 command_id;
@@ -101,10 +101,23 @@
__u64 rsvd[2];
__le64 prp1;
__le64 prp2;
- __le32 prp1_len;
- __le32 prp2_len;
- __le32 lbb;
- __u32 rsvd11[3];
+ __le64 spba;
+ __u32 rsvd4[4];
+};
+
+struct nvme_nvm_setbbtbl {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __le64 rsvd[2];
+ __le64 prp1;
+ __le64 prp2;
+ __le64 spba;
+ __le16 nlb;
+ __u8 value;
+ __u8 rsvd3;
+ __u32 rsvd4[3];
};
struct nvme_nvm_erase_blk {
@@ -129,8 +142,8 @@
struct nvme_nvm_hb_rw hb_rw;
struct nvme_nvm_ph_rw ph_rw;
struct nvme_nvm_l2ptbl l2p;
- struct nvme_nvm_bbtbl get_bb;
- struct nvme_nvm_bbtbl set_bb;
+ struct nvme_nvm_getbbtbl get_bb;
+ struct nvme_nvm_setbbtbl set_bb;
struct nvme_nvm_erase_blk erase;
};
};
@@ -142,11 +155,13 @@
__u8 num_ch;
__u8 num_lun;
__u8 num_pln;
+ __u8 rsvd1;
__le16 num_blk;
__le16 num_pg;
__le16 fpg_sz;
__le16 csecs;
__le16 sos;
+ __le16 rsvd2;
__le32 trdt;
__le32 trdm;
__le32 tprt;
@@ -154,8 +169,9 @@
__le32 tbet;
__le32 tbem;
__le32 mpos;
+ __le32 mccap;
__le16 cpar;
- __u8 reserved[913];
+ __u8 reserved[906];
} __packed;
struct nvme_nvm_addr_format {
@@ -178,15 +194,28 @@
__u8 ver_id;
__u8 vmnt;
__u8 cgrps;
- __u8 res[5];
+ __u8 res;
__le32 cap;
__le32 dom;
struct nvme_nvm_addr_format ppaf;
- __u8 ppat;
- __u8 resv[223];
+ __u8 resv[228];
struct nvme_nvm_id_group groups[4];
} __packed;
+struct nvme_nvm_bb_tbl {
+ __u8 tblid[4];
+ __le16 verid;
+ __le16 revid;
+ __le32 rvsd1;
+ __le32 tblks;
+ __le32 tfact;
+ __le32 tgrown;
+ __le32 tdresv;
+ __le32 thresv;
+ __le32 rsvd2[8];
+ __u8 blk[0];
+};
+
/*
* Check we didn't inadvertently grow the command struct
*/
@@ -195,12 +224,14 @@
BUILD_BUG_ON(sizeof(struct nvme_nvm_identity) != 64);
BUILD_BUG_ON(sizeof(struct nvme_nvm_hb_rw) != 64);
BUILD_BUG_ON(sizeof(struct nvme_nvm_ph_rw) != 64);
- BUILD_BUG_ON(sizeof(struct nvme_nvm_bbtbl) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_nvm_getbbtbl) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_nvm_setbbtbl) != 64);
BUILD_BUG_ON(sizeof(struct nvme_nvm_l2ptbl) != 64);
BUILD_BUG_ON(sizeof(struct nvme_nvm_erase_blk) != 64);
BUILD_BUG_ON(sizeof(struct nvme_nvm_id_group) != 960);
BUILD_BUG_ON(sizeof(struct nvme_nvm_addr_format) != 128);
BUILD_BUG_ON(sizeof(struct nvme_nvm_id) != 4096);
+ BUILD_BUG_ON(sizeof(struct nvme_nvm_bb_tbl) != 512);
}
static int init_grps(struct nvm_id *nvm_id, struct nvme_nvm_id *nvme_nvm_id)
@@ -234,6 +265,7 @@
dst->tbet = le32_to_cpu(src->tbet);
dst->tbem = le32_to_cpu(src->tbem);
dst->mpos = le32_to_cpu(src->mpos);
+ dst->mccap = le32_to_cpu(src->mccap);
dst->cpar = le16_to_cpu(src->cpar);
}
@@ -244,6 +276,7 @@
static int nvme_nvm_identity(struct request_queue *q, struct nvm_id *nvm_id)
{
struct nvme_ns *ns = q->queuedata;
+ struct nvme_dev *dev = ns->dev;
struct nvme_nvm_id *nvme_nvm_id;
struct nvme_nvm_command c = {};
int ret;
@@ -256,8 +289,8 @@
if (!nvme_nvm_id)
return -ENOMEM;
- ret = nvme_submit_sync_cmd(q, (struct nvme_command *)&c, nvme_nvm_id,
- sizeof(struct nvme_nvm_id));
+ ret = nvme_submit_sync_cmd(dev->admin_q, (struct nvme_command *)&c,
+ nvme_nvm_id, sizeof(struct nvme_nvm_id));
if (ret) {
ret = -EIO;
goto out;
@@ -268,6 +301,8 @@
nvm_id->cgrps = nvme_nvm_id->cgrps;
nvm_id->cap = le32_to_cpu(nvme_nvm_id->cap);
nvm_id->dom = le32_to_cpu(nvme_nvm_id->dom);
+ memcpy(&nvm_id->ppaf, &nvme_nvm_id->ppaf,
+ sizeof(struct nvme_nvm_addr_format));
ret = init_grps(nvm_id, nvme_nvm_id);
out:
@@ -281,7 +316,7 @@
struct nvme_ns *ns = q->queuedata;
struct nvme_dev *dev = ns->dev;
struct nvme_nvm_command c = {};
- u32 len = queue_max_hw_sectors(q) << 9;
+ u32 len = queue_max_hw_sectors(dev->admin_q) << 9;
u32 nlb_pr_rq = len / sizeof(u64);
u64 cmd_slba = slba;
void *entries;
@@ -299,8 +334,8 @@
c.l2p.slba = cpu_to_le64(cmd_slba);
c.l2p.nlb = cpu_to_le32(cmd_nlb);
- ret = nvme_submit_sync_cmd(q, (struct nvme_command *)&c,
- entries, len);
+ ret = nvme_submit_sync_cmd(dev->admin_q,
+ (struct nvme_command *)&c, entries, len);
if (ret) {
dev_err(dev->dev, "L2P table transfer failed (%d)\n",
ret);
@@ -322,43 +357,82 @@
return ret;
}
-static int nvme_nvm_get_bb_tbl(struct request_queue *q, int lunid,
- unsigned int nr_blocks,
- nvm_bb_update_fn *update_bbtbl, void *priv)
+static int nvme_nvm_get_bb_tbl(struct request_queue *q, struct ppa_addr ppa,
+ int nr_blocks, nvm_bb_update_fn *update_bbtbl,
+ void *priv)
{
struct nvme_ns *ns = q->queuedata;
struct nvme_dev *dev = ns->dev;
struct nvme_nvm_command c = {};
- void *bb_bitmap;
- u16 bb_bitmap_size;
+ struct nvme_nvm_bb_tbl *bb_tbl;
+ int tblsz = sizeof(struct nvme_nvm_bb_tbl) + nr_blocks;
int ret = 0;
c.get_bb.opcode = nvme_nvm_admin_get_bb_tbl;
c.get_bb.nsid = cpu_to_le32(ns->ns_id);
- c.get_bb.lbb = cpu_to_le32(lunid);
- bb_bitmap_size = ((nr_blocks >> 15) + 1) * PAGE_SIZE;
- bb_bitmap = kmalloc(bb_bitmap_size, GFP_KERNEL);
- if (!bb_bitmap)
+ c.get_bb.spba = cpu_to_le64(ppa.ppa);
+
+ bb_tbl = kzalloc(tblsz, GFP_KERNEL);
+ if (!bb_tbl)
return -ENOMEM;
- bitmap_zero(bb_bitmap, nr_blocks);
-
- ret = nvme_submit_sync_cmd(q, (struct nvme_command *)&c, bb_bitmap,
- bb_bitmap_size);
+ ret = nvme_submit_sync_cmd(dev->admin_q, (struct nvme_command *)&c,
+ bb_tbl, tblsz);
if (ret) {
dev_err(dev->dev, "get bad block table failed (%d)\n", ret);
ret = -EIO;
goto out;
}
- ret = update_bbtbl(lunid, bb_bitmap, nr_blocks, priv);
+ if (bb_tbl->tblid[0] != 'B' || bb_tbl->tblid[1] != 'B' ||
+ bb_tbl->tblid[2] != 'L' || bb_tbl->tblid[3] != 'T') {
+ dev_err(dev->dev, "bbt format mismatch\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (le16_to_cpu(bb_tbl->verid) != 1) {
+ ret = -EINVAL;
+ dev_err(dev->dev, "bbt version not supported\n");
+ goto out;
+ }
+
+ if (le32_to_cpu(bb_tbl->tblks) != nr_blocks) {
+ ret = -EINVAL;
+ dev_err(dev->dev, "bbt unsuspected blocks returned (%u!=%u)",
+ le32_to_cpu(bb_tbl->tblks), nr_blocks);
+ goto out;
+ }
+
+ ret = update_bbtbl(ppa, nr_blocks, bb_tbl->blk, priv);
if (ret) {
ret = -EINTR;
goto out;
}
out:
- kfree(bb_bitmap);
+ kfree(bb_tbl);
+ return ret;
+}
+
+static int nvme_nvm_set_bb_tbl(struct request_queue *q, struct nvm_rq *rqd,
+ int type)
+{
+ struct nvme_ns *ns = q->queuedata;
+ struct nvme_dev *dev = ns->dev;
+ struct nvme_nvm_command c = {};
+ int ret = 0;
+
+ c.set_bb.opcode = nvme_nvm_admin_set_bb_tbl;
+ c.set_bb.nsid = cpu_to_le32(ns->ns_id);
+ c.set_bb.spba = cpu_to_le64(rqd->ppa_addr.ppa);
+ c.set_bb.nlb = cpu_to_le16(rqd->nr_pages - 1);
+ c.set_bb.value = type;
+
+ ret = nvme_submit_sync_cmd(dev->admin_q, (struct nvme_command *)&c,
+ NULL, 0);
+ if (ret)
+ dev_err(dev->dev, "set bad block table failed (%d)\n", ret);
return ret;
}
@@ -474,6 +548,7 @@
.get_l2p_tbl = nvme_nvm_get_l2p_tbl,
.get_bb_tbl = nvme_nvm_get_bb_tbl,
+ .set_bb_tbl = nvme_nvm_set_bb_tbl,
.submit_io = nvme_nvm_submit_io,
.erase_block = nvme_nvm_erase_block,
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 8187df2..f3b53af 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -896,19 +896,28 @@
goto retry_cmd;
}
if (blk_integrity_rq(req)) {
- if (blk_rq_count_integrity_sg(req->q, req->bio) != 1)
+ if (blk_rq_count_integrity_sg(req->q, req->bio) != 1) {
+ dma_unmap_sg(dev->dev, iod->sg, iod->nents,
+ dma_dir);
goto error_cmd;
+ }
sg_init_table(iod->meta_sg, 1);
if (blk_rq_map_integrity_sg(
- req->q, req->bio, iod->meta_sg) != 1)
+ req->q, req->bio, iod->meta_sg) != 1) {
+ dma_unmap_sg(dev->dev, iod->sg, iod->nents,
+ dma_dir);
goto error_cmd;
+ }
if (rq_data_dir(req))
nvme_dif_remap(req, nvme_dif_prep);
- if (!dma_map_sg(nvmeq->q_dmadev, iod->meta_sg, 1, dma_dir))
+ if (!dma_map_sg(nvmeq->q_dmadev, iod->meta_sg, 1, dma_dir)) {
+ dma_unmap_sg(dev->dev, iod->sg, iod->nents,
+ dma_dir);
goto error_cmd;
+ }
}
}
@@ -968,7 +977,8 @@
if (head == nvmeq->cq_head && phase == nvmeq->cq_phase)
return;
- writel(head, nvmeq->q_db + nvmeq->dev->db_stride);
+ if (likely(nvmeq->cq_vector >= 0))
+ writel(head, nvmeq->q_db + nvmeq->dev->db_stride);
nvmeq->cq_head = head;
nvmeq->cq_phase = phase;
@@ -1727,9 +1737,13 @@
u32 aqa;
u64 cap = lo_hi_readq(&dev->bar->cap);
struct nvme_queue *nvmeq;
- unsigned page_shift = PAGE_SHIFT;
+ /*
+ * default to a 4K page size, with the intention to update this
+ * path in the future to accomodate architectures with differing
+ * kernel and IO page sizes.
+ */
+ unsigned page_shift = 12;
unsigned dev_page_min = NVME_CAP_MPSMIN(cap) + 12;
- unsigned dev_page_max = NVME_CAP_MPSMAX(cap) + 12;
if (page_shift < dev_page_min) {
dev_err(dev->dev,
@@ -1738,13 +1752,6 @@
1 << page_shift);
return -ENODEV;
}
- if (page_shift > dev_page_max) {
- dev_info(dev->dev,
- "Device maximum page size (%u) smaller than "
- "host (%u); enabling work-around\n",
- 1 << dev_page_max, 1 << page_shift);
- page_shift = dev_page_max;
- }
dev->subsystem = readl(&dev->bar->vs) >= NVME_VS(1, 1) ?
NVME_CAP_NSSRC(cap) : 0;
@@ -2268,7 +2275,7 @@
if (dev->max_hw_sectors) {
blk_queue_max_hw_sectors(ns->queue, dev->max_hw_sectors);
blk_queue_max_segments(ns->queue,
- ((dev->max_hw_sectors << 9) / dev->page_size) + 1);
+ (dev->max_hw_sectors / (dev->page_size >> 9)) + 1);
}
if (dev->stripe_size)
blk_queue_chunk_sectors(ns->queue, dev->stripe_size >> 9);
@@ -2787,6 +2794,10 @@
{
struct nvme_delq_ctx *dq = nvmeq->cmdinfo.ctx;
nvme_put_dq(dq);
+
+ spin_lock_irq(&nvmeq->q_lock);
+ nvme_process_cq(nvmeq);
+ spin_unlock_irq(&nvmeq->q_lock);
}
static int adapter_async_del_queue(struct nvme_queue *nvmeq, u8 opcode,
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 540f077..02a7452 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -440,7 +440,6 @@
ret, pp->io);
continue;
}
- pp->io_base = pp->io->start;
break;
case IORESOURCE_MEM:
pp->mem = win->res;
diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
index 35457ec..163671a 100644
--- a/drivers/pci/host/pcie-hisi.c
+++ b/drivers/pci/host/pcie-hisi.c
@@ -111,7 +111,7 @@
.link_up = hisi_pcie_link_up,
};
-static int __init hisi_add_pcie_port(struct pcie_port *pp,
+static int hisi_add_pcie_port(struct pcie_port *pp,
struct platform_device *pdev)
{
int ret;
@@ -139,7 +139,7 @@
return 0;
}
-static int __init hisi_pcie_probe(struct platform_device *pdev)
+static int hisi_pcie_probe(struct platform_device *pdev)
{
struct hisi_pcie *hisi_pcie;
struct pcie_port *pp;
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 9261868..eead54c 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -216,7 +216,10 @@
if (ret)
return ret;
- if (node >= MAX_NUMNODES || !node_online(node))
+ if ((node < 0 && node != NUMA_NO_NODE) || node >= MAX_NUMNODES)
+ return -EINVAL;
+
+ if (node != NUMA_NO_NODE && !node_online(node))
return -EINVAL;
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fd2f03f..d390fc1 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -337,6 +337,4 @@
}
#endif
-struct pci_host_bridge *pci_find_host_bridge(struct pci_bus *bus);
-
#endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e735c72..edb1984 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1685,8 +1685,8 @@
{
struct device *bridge = pci_get_host_bridge_device(dev);
- if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
- if (bridge->parent)
+ if (IS_ENABLED(CONFIG_OF) &&
+ bridge->parent && bridge->parent->of_node) {
of_dma_configure(&dev->dev, bridge->parent->of_node);
} else if (has_acpi_companion(bridge)) {
struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 188006c..aa705bb 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -15,9 +15,6 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-#include <linux/pm_wakeirq.h>
#include <linux/rtc/ds1307.h>
#include <linux/rtc.h>
#include <linux/slab.h>
@@ -117,7 +114,6 @@
#define HAS_ALARM 1 /* bit 1 == irq claimed */
struct i2c_client *client;
struct rtc_device *rtc;
- int wakeirq;
s32 (*read_block_data)(const struct i2c_client *client, u8 command,
u8 length, u8 *values);
s32 (*write_block_data)(const struct i2c_client *client, u8 command,
@@ -1138,7 +1134,10 @@
bin2bcd(tmp));
}
- device_set_wakeup_capable(&client->dev, want_irq);
+ if (want_irq) {
+ device_set_wakeup_capable(&client->dev, true);
+ set_bit(HAS_ALARM, &ds1307->flags);
+ }
ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
rtc_ops, THIS_MODULE);
if (IS_ERR(ds1307->rtc)) {
@@ -1146,43 +1145,19 @@
}
if (want_irq) {
- struct device_node *node = client->dev.of_node;
-
err = devm_request_threaded_irq(&client->dev,
client->irq, NULL, irq_handler,
IRQF_SHARED | IRQF_ONESHOT,
ds1307->rtc->name, client);
if (err) {
client->irq = 0;
+ device_set_wakeup_capable(&client->dev, false);
+ clear_bit(HAS_ALARM, &ds1307->flags);
dev_err(&client->dev, "unable to request IRQ!\n");
- goto no_irq;
- }
-
- set_bit(HAS_ALARM, &ds1307->flags);
- dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
-
- /* Currently supported by OF code only! */
- if (!node)
- goto no_irq;
-
- err = of_irq_get(node, 1);
- if (err <= 0) {
- if (err == -EPROBE_DEFER)
- goto exit;
- goto no_irq;
- }
- ds1307->wakeirq = err;
-
- err = dev_pm_set_dedicated_wake_irq(&client->dev,
- ds1307->wakeirq);
- if (err) {
- dev_err(&client->dev, "unable to setup wakeIRQ %d!\n",
- err);
- goto exit;
- }
+ } else
+ dev_dbg(&client->dev, "got IRQ %d\n", client->irq);
}
-no_irq:
if (chip->nvram_size) {
ds1307->nvram = devm_kzalloc(&client->dev,
@@ -1226,9 +1201,6 @@
{
struct ds1307 *ds1307 = i2c_get_clientdata(client);
- if (ds1307->wakeirq)
- dev_pm_clear_wake_irq(&client->dev);
-
if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 548a189..a831d18 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -1080,28 +1080,10 @@
free_page((unsigned long)sei_page);
}
-int chsc_enable_facility(int operation_code)
+int __chsc_enable_facility(struct chsc_sda_area *sda_area, int operation_code)
{
- unsigned long flags;
int ret;
- struct {
- struct chsc_header request;
- u8 reserved1:4;
- u8 format:4;
- u8 reserved2;
- u16 operation_code;
- u32 reserved3;
- u32 reserved4;
- u32 operation_data_area[252];
- struct chsc_header response;
- u32 reserved5:4;
- u32 format2:4;
- u32 reserved6:24;
- } __attribute__ ((packed)) *sda_area;
- spin_lock_irqsave(&chsc_page_lock, flags);
- memset(chsc_page, 0, PAGE_SIZE);
- sda_area = chsc_page;
sda_area->request.length = 0x0400;
sda_area->request.code = 0x0031;
sda_area->operation_code = operation_code;
@@ -1119,10 +1101,25 @@
default:
ret = chsc_error_from_response(sda_area->response.code);
}
+out:
+ return ret;
+}
+
+int chsc_enable_facility(int operation_code)
+{
+ struct chsc_sda_area *sda_area;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&chsc_page_lock, flags);
+ memset(chsc_page, 0, PAGE_SIZE);
+ sda_area = chsc_page;
+
+ ret = __chsc_enable_facility(sda_area, operation_code);
if (ret != 0)
CIO_CRW_EVENT(2, "chsc: sda (oc=%x) failed (rc=%04x)\n",
operation_code, sda_area->response.code);
-out:
+
spin_unlock_irqrestore(&chsc_page_lock, flags);
return ret;
}
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 76c9b50..0de134c 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -115,6 +115,20 @@
u8 data[PAGE_SIZE - 20];
} __attribute__ ((packed));
+struct chsc_sda_area {
+ struct chsc_header request;
+ u8 :4;
+ u8 format:4;
+ u8 :8;
+ u16 operation_code;
+ u32 :32;
+ u32 :32;
+ u32 operation_data_area[252];
+ struct chsc_header response;
+ u32 :4;
+ u32 format2:4;
+ u32 :24;
+} __packed __aligned(PAGE_SIZE);
extern int chsc_get_ssd_info(struct subchannel_id schid,
struct chsc_ssd_info *ssd);
@@ -122,6 +136,7 @@
extern int chsc_init(void);
extern void chsc_init_cleanup(void);
+int __chsc_enable_facility(struct chsc_sda_area *sda_area, int operation_code);
extern int chsc_enable_facility(int);
struct channel_subsystem;
extern int chsc_secm(struct channel_subsystem *, int);
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index b5620e8..690b854 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -925,18 +925,32 @@
int __init cio_get_iplinfo(struct cio_iplinfo *iplinfo)
{
+ static struct chsc_sda_area sda_area __initdata;
struct subchannel_id schid;
struct schib schib;
schid = *(struct subchannel_id *)&S390_lowcore.subchannel_id;
if (!schid.one)
return -ENODEV;
+
+ if (schid.ssid) {
+ /*
+ * Firmware should have already enabled MSS but whoever started
+ * the kernel might have initiated a channel subsystem reset.
+ * Ensure that MSS is enabled.
+ */
+ memset(&sda_area, 0, sizeof(sda_area));
+ if (__chsc_enable_facility(&sda_area, CHSC_SDA_OC_MSS))
+ return -ENODEV;
+ }
if (stsch_err(schid, &schib))
return -ENODEV;
if (schib.pmcw.st != SUBCHANNEL_TYPE_IO)
return -ENODEV;
if (!schib.pmcw.dnv)
return -ENODEV;
+
+ iplinfo->ssid = schid.ssid;
iplinfo->devno = schib.pmcw.dev;
iplinfo->is_qdio = schib.pmcw.qf;
return 0;
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 2ee3053..489e703 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -702,17 +702,12 @@
css->global_pgid.pgid_high.ext_cssid.version = 0x80;
css->global_pgid.pgid_high.ext_cssid.cssid = css->cssid;
} else {
-#ifdef CONFIG_SMP
css->global_pgid.pgid_high.cpu_addr = stap();
-#else
- css->global_pgid.pgid_high.cpu_addr = 0;
-#endif
}
get_cpu_id(&cpu_id);
css->global_pgid.cpu_id = cpu_id.ident;
css->global_pgid.cpu_model = cpu_id.machine;
css->global_pgid.tod_high = tod_high;
-
}
static void
diff --git a/drivers/s390/crypto/Makefile b/drivers/s390/crypto/Makefile
index 57f710b..b8ab186 100644
--- a/drivers/s390/crypto/Makefile
+++ b/drivers/s390/crypto/Makefile
@@ -3,6 +3,9 @@
#
ap-objs := ap_bus.o
-obj-$(CONFIG_ZCRYPT) += ap.o zcrypt_api.o zcrypt_pcixcc.o
-obj-$(CONFIG_ZCRYPT) += zcrypt_cex2a.o zcrypt_cex4.o
+# zcrypt_api depends on ap
+obj-$(CONFIG_ZCRYPT) += ap.o zcrypt_api.o
+# msgtype* depend on zcrypt_api
obj-$(CONFIG_ZCRYPT) += zcrypt_msgtype6.o zcrypt_msgtype50.o
+# adapter drivers depend on ap, zcrypt_api and msgtype*
+obj-$(CONFIG_ZCRYPT) += zcrypt_pcixcc.o zcrypt_cex2a.o zcrypt_cex4.o
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 9cb3dfb..61f7685 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -74,6 +74,7 @@
static struct ap_config_info *ap_configuration;
static DEFINE_SPINLOCK(ap_device_list_lock);
static LIST_HEAD(ap_device_list);
+static bool initialised;
/*
* Workqueue timer for bus rescan.
@@ -1384,6 +1385,9 @@
{
struct device_driver *drv = &ap_drv->driver;
+ if (!initialised)
+ return -ENODEV;
+
drv->bus = &ap_bus_type;
drv->probe = ap_device_probe;
drv->remove = ap_device_remove;
@@ -1808,6 +1812,7 @@
goto out_pm;
queue_work(system_long_wq, &ap_scan_work);
+ initialised = true;
return 0;
@@ -1837,6 +1842,7 @@
{
int i;
+ initialised = false;
ap_reset_domain();
ap_poll_thread_stop();
del_timer_sync(&ap_config_timer);
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index a9603eb..9f8fa42 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -317,11 +317,9 @@
void zcrypt_msgtype_register(struct zcrypt_ops *zops)
{
- if (zops->owner) {
- spin_lock_bh(&zcrypt_ops_list_lock);
- list_add_tail(&zops->list, &zcrypt_ops_list);
- spin_unlock_bh(&zcrypt_ops_list_lock);
- }
+ spin_lock_bh(&zcrypt_ops_list_lock);
+ list_add_tail(&zops->list, &zcrypt_ops_list);
+ spin_unlock_bh(&zcrypt_ops_list_lock);
}
EXPORT_SYMBOL(zcrypt_msgtype_register);
@@ -342,7 +340,7 @@
spin_lock_bh(&zcrypt_ops_list_lock);
list_for_each_entry(zops, &zcrypt_ops_list, list) {
if ((zops->variant == variant) &&
- (!strncmp(zops->owner->name, name, MODULE_NAME_LEN))) {
+ (!strncmp(zops->name, name, sizeof(zops->name)))) {
found = 1;
break;
}
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index 7508768..38618f0 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -96,6 +96,7 @@
struct list_head list; /* zcrypt ops list. */
struct module *owner;
int variant;
+ char name[128];
};
struct zcrypt_device {
diff --git a/drivers/s390/crypto/zcrypt_msgtype50.c b/drivers/s390/crypto/zcrypt_msgtype50.c
index 71ceee9..74edf29 100644
--- a/drivers/s390/crypto/zcrypt_msgtype50.c
+++ b/drivers/s390/crypto/zcrypt_msgtype50.c
@@ -513,6 +513,7 @@
.rsa_modexpo = zcrypt_cex2a_modexpo,
.rsa_modexpo_crt = zcrypt_cex2a_modexpo_crt,
.owner = THIS_MODULE,
+ .name = MSGTYPE50_NAME,
.variant = MSGTYPE50_VARIANT_DEFAULT,
};
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c
index 7476221..9a2dd47 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.c
+++ b/drivers/s390/crypto/zcrypt_msgtype6.c
@@ -1119,6 +1119,7 @@
*/
static struct zcrypt_ops zcrypt_msgtype6_norng_ops = {
.owner = THIS_MODULE,
+ .name = MSGTYPE06_NAME,
.variant = MSGTYPE06_VARIANT_NORNG,
.rsa_modexpo = zcrypt_msgtype6_modexpo,
.rsa_modexpo_crt = zcrypt_msgtype6_modexpo_crt,
@@ -1127,6 +1128,7 @@
static struct zcrypt_ops zcrypt_msgtype6_ops = {
.owner = THIS_MODULE,
+ .name = MSGTYPE06_NAME,
.variant = MSGTYPE06_VARIANT_DEFAULT,
.rsa_modexpo = zcrypt_msgtype6_modexpo,
.rsa_modexpo_crt = zcrypt_msgtype6_modexpo_crt,
@@ -1136,6 +1138,7 @@
static struct zcrypt_ops zcrypt_msgtype6_ep11_ops = {
.owner = THIS_MODULE,
+ .name = MSGTYPE06_NAME,
.variant = MSGTYPE06_VARIANT_EP11,
.rsa_modexpo = NULL,
.rsa_modexpo_crt = NULL,
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 3ba2e95..81af294 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -902,7 +902,7 @@
return sprintf(page, "%d\n", tpg->tpg_attrib.fabric_prot_type);
}
-CONFIGFS_ATTR_WO(tcm_qla2xxx_tpg_, enable);
+CONFIGFS_ATTR(tcm_qla2xxx_tpg_, enable);
CONFIGFS_ATTR_RO(tcm_qla2xxx_tpg_, dynamic_sessions);
CONFIGFS_ATTR(tcm_qla2xxx_tpg_, fabric_prot_type);
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
index 25abd4e..91a00301 100644
--- a/drivers/sh/pm_runtime.c
+++ b/drivers/sh/pm_runtime.c
@@ -34,7 +34,7 @@
static int __init sh_pm_runtime_init(void)
{
- if (IS_ENABLED(CONFIG_ARCH_SHMOBILE_MULTI)) {
+ if (IS_ENABLED(CONFIG_ARCH_SHMOBILE)) {
if (!of_find_compatible_node(NULL, NULL,
"renesas,cpg-mstp-clocks"))
return 0;
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 9d50682..0a4ea80 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -23,6 +23,7 @@
config MTK_SCPSYS
bool "MediaTek SCPSYS Support"
depends on ARCH_MEDIATEK || COMPILE_TEST
+ default ARM64 && ARCH_MEDIATEK
select REGMAP
select MTK_INFRACFG
select PM_GENERIC_DOMAINS if PM
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index f3a0b6a..8c03a80 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -1179,7 +1179,7 @@
block++;
if (!block->size)
- return 0;
+ continue;
dev_dbg(kdev->dev, "linkram1: phys:%x, virt:%p, size:%x\n",
block->phys, block->virt, block->size);
@@ -1519,9 +1519,9 @@
for (i = 0; i < ARRAY_SIZE(knav_acc_firmwares); i++) {
if (knav_acc_firmwares[i]) {
- ret = request_firmware(&fw,
- knav_acc_firmwares[i],
- kdev->dev);
+ ret = request_firmware_direct(&fw,
+ knav_acc_firmwares[i],
+ kdev->dev);
if (!ret) {
found = true;
break;
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index 6d5b38d..9d7f000 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -18,7 +18,8 @@
source "drivers/staging/iio/trigger/Kconfig"
config IIO_DUMMY_EVGEN
- tristate
+ tristate
+ select IRQ_WORK
config IIO_SIMPLE_DUMMY
tristate "An example driver with no hardware requirements"
diff --git a/drivers/staging/iio/adc/lpc32xx_adc.c b/drivers/staging/iio/adc/lpc32xx_adc.c
index d11c54b..b51f237 100644
--- a/drivers/staging/iio/adc/lpc32xx_adc.c
+++ b/drivers/staging/iio/adc/lpc32xx_adc.c
@@ -76,7 +76,7 @@
if (mask == IIO_CHAN_INFO_RAW) {
mutex_lock(&indio_dev->mlock);
- clk_enable(info->clk);
+ clk_prepare_enable(info->clk);
/* Measurement setup */
__raw_writel(AD_INTERNAL | (chan->address) | AD_REFp | AD_REFm,
LPC32XX_ADC_SELECT(info->adc_base));
@@ -84,7 +84,7 @@
__raw_writel(AD_PDN_CTRL | AD_STROBE,
LPC32XX_ADC_CTRL(info->adc_base));
wait_for_completion(&info->completion); /* set by ISR */
- clk_disable(info->clk);
+ clk_disable_unprepare(info->clk);
*val = info->value;
mutex_unlock(&indio_dev->mlock);
diff --git a/drivers/staging/wilc1000/coreconfigurator.c b/drivers/staging/wilc1000/coreconfigurator.c
index e10c6ff..9568bdb 100644
--- a/drivers/staging/wilc1000/coreconfigurator.c
+++ b/drivers/staging/wilc1000/coreconfigurator.c
@@ -13,12 +13,8 @@
#include "wilc_wlan.h"
#include <linux/errno.h>
#include <linux/slab.h>
-#include <linux/etherdevice.h>
#define TAG_PARAM_OFFSET (MAC_HDR_LEN + TIME_STAMP_LEN + \
BEACON_INTERVAL_LEN + CAP_INFO_LEN)
-#define ADDR1 4
-#define ADDR2 10
-#define ADDR3 16
/* Basic Frame Type Codes (2-bit) */
enum basic_frame_type {
@@ -175,32 +171,38 @@
return ((header[1] & 0x02) >> 1);
}
+/* This function extracts the MAC Address in 'address1' field of the MAC */
+/* header and updates the MAC Address in the allocated 'addr' variable. */
+static inline void get_address1(u8 *pu8msa, u8 *addr)
+{
+ memcpy(addr, pu8msa + 4, 6);
+}
+
+/* This function extracts the MAC Address in 'address2' field of the MAC */
+/* header and updates the MAC Address in the allocated 'addr' variable. */
+static inline void get_address2(u8 *pu8msa, u8 *addr)
+{
+ memcpy(addr, pu8msa + 10, 6);
+}
+
+/* This function extracts the MAC Address in 'address3' field of the MAC */
+/* header and updates the MAC Address in the allocated 'addr' variable. */
+static inline void get_address3(u8 *pu8msa, u8 *addr)
+{
+ memcpy(addr, pu8msa + 16, 6);
+}
+
/* This function extracts the BSSID from the incoming WLAN packet based on */
-/* the 'from ds' bit, and updates the MAC Address in the allocated 'data' */
+/* the 'from ds' bit, and updates the MAC Address in the allocated 'addr' */
/* variable. */
static inline void get_BSSID(u8 *data, u8 *bssid)
{
if (get_from_ds(data) == 1)
- /*
- * Extract the MAC Address in 'address2' field of the MAC
- * header and update the MAC Address in the allocated 'data'
- * variable.
- */
- ether_addr_copy(data, bssid + ADDR2);
+ get_address2(data, bssid);
else if (get_to_ds(data) == 1)
- /*
- * Extract the MAC Address in 'address1' field of the MAC
- * header and update the MAC Address in the allocated 'data'
- * variable.
- */
- ether_addr_copy(data, bssid + ADDR1);
+ get_address1(data, bssid);
else
- /*
- * Extract the MAC Address in 'address3' field of the MAC
- * header and update the MAC Address in the allocated 'data'
- * variable.
- */
- ether_addr_copy(data, bssid + ADDR3);
+ get_address3(data, bssid);
}
/* This function extracts the SSID from a beacon/probe response frame */
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 342a07c..72204fb 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4074,6 +4074,17 @@
return iscsit_add_reject(conn, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf);
}
+static bool iscsi_target_check_conn_state(struct iscsi_conn *conn)
+{
+ bool ret;
+
+ spin_lock_bh(&conn->state_lock);
+ ret = (conn->conn_state != TARG_CONN_STATE_LOGGED_IN);
+ spin_unlock_bh(&conn->state_lock);
+
+ return ret;
+}
+
int iscsi_target_rx_thread(void *arg)
{
int ret, rc;
@@ -4091,7 +4102,7 @@
* incoming iscsi/tcp socket I/O, and/or failing the connection.
*/
rc = wait_for_completion_interruptible(&conn->rx_login_comp);
- if (rc < 0)
+ if (rc < 0 || iscsi_target_check_conn_state(conn))
return 0;
if (conn->conn_transport->transport_type == ISCSI_INFINIBAND) {
diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c
index 5c964c0..9fc9117 100644
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -388,6 +388,7 @@
if (login->login_complete) {
if (conn->rx_thread && conn->rx_thread_active) {
send_sig(SIGINT, conn->rx_thread, 1);
+ complete(&conn->rx_login_comp);
kthread_stop(conn->rx_thread);
}
if (conn->tx_thread && conn->tx_thread_active) {
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 51d1734..2cbea2a 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -208,7 +208,7 @@
if (!pl) {
pr_err("Unable to allocate memory for"
" struct iscsi_param_list.\n");
- return -1 ;
+ return -ENOMEM;
}
INIT_LIST_HEAD(&pl->param_list);
INIT_LIST_HEAD(&pl->extra_response_list);
@@ -578,7 +578,7 @@
param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL);
if (!param_list) {
pr_err("Unable to allocate memory for struct iscsi_param_list.\n");
- return -1;
+ return -ENOMEM;
}
INIT_LIST_HEAD(¶m_list->param_list);
INIT_LIST_HEAD(¶m_list->extra_response_list);
@@ -629,7 +629,7 @@
err_out:
iscsi_release_param_list(param_list);
- return -1;
+ return -ENOMEM;
}
static void iscsi_release_extra_responses(struct iscsi_param_list *param_list)
@@ -729,7 +729,7 @@
if (!extra_response) {
pr_err("Unable to allocate memory for"
" struct iscsi_extra_response.\n");
- return -1;
+ return -ENOMEM;
}
INIT_LIST_HEAD(&extra_response->er_list);
@@ -1370,7 +1370,7 @@
tmpbuf = kzalloc(length + 1, GFP_KERNEL);
if (!tmpbuf) {
pr_err("Unable to allocate %u + 1 bytes for tmpbuf.\n", length);
- return -1;
+ return -ENOMEM;
}
memcpy(tmpbuf, textbuf, length);
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 0b4b2a6..98698d8 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -371,7 +371,8 @@
return 0;
}
-static sense_reason_t xdreadwrite_callback(struct se_cmd *cmd, bool success)
+static sense_reason_t xdreadwrite_callback(struct se_cmd *cmd, bool success,
+ int *post_ret)
{
unsigned char *buf, *addr;
struct scatterlist *sg;
@@ -437,7 +438,8 @@
cmd->data_direction);
}
-static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success)
+static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success,
+ int *post_ret)
{
struct se_device *dev = cmd->se_dev;
@@ -447,8 +449,10 @@
* sent to the backend driver.
*/
spin_lock_irq(&cmd->t_state_lock);
- if ((cmd->transport_state & CMD_T_SENT) && !cmd->scsi_status)
+ if ((cmd->transport_state & CMD_T_SENT) && !cmd->scsi_status) {
cmd->se_cmd_flags |= SCF_COMPARE_AND_WRITE_POST;
+ *post_ret = 1;
+ }
spin_unlock_irq(&cmd->t_state_lock);
/*
@@ -460,7 +464,8 @@
return TCM_NO_SENSE;
}
-static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success)
+static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success,
+ int *post_ret)
{
struct se_device *dev = cmd->se_dev;
struct scatterlist *write_sg = NULL, *sg;
@@ -556,11 +561,11 @@
if (block_size < PAGE_SIZE) {
sg_set_page(&write_sg[i], m.page, block_size,
- block_size);
+ m.piter.sg->offset + block_size);
} else {
sg_miter_next(&m);
sg_set_page(&write_sg[i], m.page, block_size,
- 0);
+ m.piter.sg->offset);
}
len -= block_size;
i++;
diff --git a/drivers/target/target_core_stat.c b/drivers/target/target_core_stat.c
index 273c72b..81a6b3e 100644
--- a/drivers/target/target_core_stat.c
+++ b/drivers/target/target_core_stat.c
@@ -246,7 +246,7 @@
char str[sizeof(dev->t10_wwn.model)+1];
/* scsiLuProductId */
- for (i = 0; i < sizeof(dev->t10_wwn.vendor); i++)
+ for (i = 0; i < sizeof(dev->t10_wwn.model); i++)
str[i] = ISPRINT(dev->t10_wwn.model[i]) ?
dev->t10_wwn.model[i] : ' ';
str[i] = '\0';
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 5b28203..28fb301 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -130,6 +130,9 @@
if (tmr->ref_task_tag != ref_tag)
continue;
+ if (!kref_get_unless_zero(&se_cmd->cmd_kref))
+ continue;
+
printk("ABORT_TASK: Found referenced %s task_tag: %llu\n",
se_cmd->se_tfo->get_fabric_name(), ref_tag);
@@ -139,13 +142,15 @@
" skipping\n", ref_tag);
spin_unlock(&se_cmd->t_state_lock);
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+
+ target_put_sess_cmd(se_cmd);
+
goto out;
}
se_cmd->transport_state |= CMD_T_ABORTED;
spin_unlock(&se_cmd->t_state_lock);
list_del_init(&se_cmd->se_cmd_list);
- kref_get(&se_cmd->cmd_kref);
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
cancel_work_sync(&se_cmd->work);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 5bacc7b..4fdcee2 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1658,7 +1658,7 @@
void transport_generic_request_failure(struct se_cmd *cmd,
sense_reason_t sense_reason)
{
- int ret = 0;
+ int ret = 0, post_ret = 0;
pr_debug("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08llx"
" CDB: 0x%02x\n", cmd, cmd->tag, cmd->t_task_cdb[0]);
@@ -1680,7 +1680,7 @@
*/
if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
cmd->transport_complete_callback)
- cmd->transport_complete_callback(cmd, false);
+ cmd->transport_complete_callback(cmd, false, &post_ret);
switch (sense_reason) {
case TCM_NON_EXISTENT_LUN:
@@ -2068,11 +2068,13 @@
*/
if (cmd->transport_complete_callback) {
sense_reason_t rc;
+ bool caw = (cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE);
+ bool zero_dl = !(cmd->data_length);
+ int post_ret = 0;
- rc = cmd->transport_complete_callback(cmd, true);
- if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST)) {
- if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
- !cmd->data_length)
+ rc = cmd->transport_complete_callback(cmd, true, &post_ret);
+ if (!rc && !post_ret) {
+ if (caw && zero_dl)
goto queue_rsp;
return;
@@ -2507,23 +2509,24 @@
EXPORT_SYMBOL(target_get_sess_cmd);
static void target_release_cmd_kref(struct kref *kref)
- __releases(&se_cmd->se_sess->sess_cmd_lock)
{
struct se_cmd *se_cmd = container_of(kref, struct se_cmd, cmd_kref);
struct se_session *se_sess = se_cmd->se_sess;
+ unsigned long flags;
+ spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
if (list_empty(&se_cmd->se_cmd_list)) {
- spin_unlock(&se_sess->sess_cmd_lock);
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
se_cmd->se_tfo->release_cmd(se_cmd);
return;
}
if (se_sess->sess_tearing_down && se_cmd->cmd_wait_set) {
- spin_unlock(&se_sess->sess_cmd_lock);
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
complete(&se_cmd->cmd_wait_comp);
return;
}
list_del(&se_cmd->se_cmd_list);
- spin_unlock(&se_sess->sess_cmd_lock);
+ spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
se_cmd->se_tfo->release_cmd(se_cmd);
}
@@ -2539,8 +2542,7 @@
se_cmd->se_tfo->release_cmd(se_cmd);
return 1;
}
- return kref_put_spinlock_irqsave(&se_cmd->cmd_kref, target_release_cmd_kref,
- &se_sess->sess_cmd_lock);
+ return kref_put(&se_cmd->cmd_kref, target_release_cmd_kref);
}
EXPORT_SYMBOL(target_put_sess_cmd);
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 937cebf..5e6d6cb 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -638,7 +638,7 @@
if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
return 0;
- if (!time_after(cmd->deadline, jiffies))
+ if (!time_after(jiffies, cmd->deadline))
return 0;
set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags);
@@ -1101,8 +1101,6 @@
static const struct target_backend_ops tcmu_ops = {
.name = "user",
- .inquiry_prod = "USER",
- .inquiry_rev = TCMU_VERSION,
.owner = THIS_MODULE,
.transport_flags = TRANSPORT_FLAG_PASSTHROUGH,
.attach_hba = tcmu_attach_hba,
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index c463c89..8cc4ac6 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -382,7 +382,7 @@
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
- depends on OF && (SPMI || COMPILE_TEST) && IIO
+ depends on OF && SPMI && IIO
select REGMAP_SPMI
help
This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index c8fe3ca..c5547bd 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -55,6 +55,7 @@
#define TEMPSENSE2_PANIC_VALUE_SHIFT 16
#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
+#define OCOTP_MEM0 0x0480
#define OCOTP_ANA1 0x04e0
/* The driver supports 1 passive trip point and 1 critical trip point */
@@ -64,12 +65,6 @@
IMX_TRIP_NUM,
};
-/*
- * It defines the temperature in millicelsius for passive trip point
- * that will trigger cooling action when crossed.
- */
-#define IMX_TEMP_PASSIVE 85000
-
#define IMX_POLLING_DELAY 2000 /* millisecond */
#define IMX_PASSIVE_DELAY 1000
@@ -100,12 +95,14 @@
u32 c1, c2; /* See formula in imx_get_sensor_data() */
int temp_passive;
int temp_critical;
+ int temp_max;
int alarm_temp;
int last_temp;
bool irq_enabled;
int irq;
struct clk *thermal_clk;
const struct thermal_soc_data *socdata;
+ const char *temp_grade;
};
static void imx_set_panic_temp(struct imx_thermal_data *data,
@@ -285,10 +282,12 @@
{
struct imx_thermal_data *data = tz->devdata;
+ /* do not allow changing critical threshold */
if (trip == IMX_TRIP_CRITICAL)
return -EPERM;
- if (temp < 0 || temp > IMX_TEMP_PASSIVE)
+ /* do not allow passive to be set higher than critical */
+ if (temp < 0 || temp > data->temp_critical)
return -EINVAL;
data->temp_passive = temp;
@@ -404,17 +403,39 @@
data->c1 = temp64;
data->c2 = n1 * data->c1 + 1000 * t1;
- /*
- * Set the default passive cooling trip point,
- * can be changed from userspace.
- */
- data->temp_passive = IMX_TEMP_PASSIVE;
+ /* use OTP for thermal grade */
+ ret = regmap_read(map, OCOTP_MEM0, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret);
+ return ret;
+ }
+
+ /* The maximum die temp is specified by the Temperature Grade */
+ switch ((val >> 6) & 0x3) {
+ case 0: /* Commercial (0 to 95C) */
+ data->temp_grade = "Commercial";
+ data->temp_max = 95000;
+ break;
+ case 1: /* Extended Commercial (-20 to 105C) */
+ data->temp_grade = "Extended Commercial";
+ data->temp_max = 105000;
+ break;
+ case 2: /* Industrial (-40 to 105C) */
+ data->temp_grade = "Industrial";
+ data->temp_max = 105000;
+ break;
+ case 3: /* Automotive (-40 to 125C) */
+ data->temp_grade = "Automotive";
+ data->temp_max = 125000;
+ break;
+ }
/*
- * The maximum die temperature set to 20 C higher than
- * IMX_TEMP_PASSIVE.
+ * Set the critical trip point at 5C under max
+ * Set the passive trip point at 10C under max (can change via sysfs)
*/
- data->temp_critical = 1000 * 20 + data->temp_passive;
+ data->temp_critical = data->temp_max - (1000 * 5);
+ data->temp_passive = data->temp_max - (1000 * 10);
return 0;
}
@@ -551,6 +572,11 @@
return ret;
}
+ dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
+ " critical:%dC passive:%dC\n", data->temp_grade,
+ data->temp_max / 1000, data->temp_critical / 1000,
+ data->temp_passive / 1000);
+
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 42b7d42..be4eedc 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -964,7 +964,7 @@
np = of_find_node_by_name(NULL, "thermal-zones");
if (!np) {
- pr_err("unable to find thermal zones\n");
+ pr_debug("unable to find thermal zones\n");
return;
}
diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c
index f0fbea3..1246aa6 100644
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -174,7 +174,6 @@
/**
* pid_controller() - PID controller
* @tz: thermal zone we are operating in
- * @current_temp: the current temperature in millicelsius
* @control_temp: the target temperature in millicelsius
* @max_allocatable_power: maximum allocatable power for this thermal zone
*
@@ -191,7 +190,6 @@
* Return: The power budget for the next period.
*/
static u32 pid_controller(struct thermal_zone_device *tz,
- int current_temp,
int control_temp,
u32 max_allocatable_power)
{
@@ -211,7 +209,7 @@
true);
}
- err = control_temp - current_temp;
+ err = control_temp - tz->temperature;
err = int_to_frac(err);
/* Calculate the proportional term */
@@ -332,7 +330,6 @@
}
static int allocate_power(struct thermal_zone_device *tz,
- int current_temp,
int control_temp)
{
struct thermal_instance *instance;
@@ -418,8 +415,7 @@
i++;
}
- power_range = pid_controller(tz, current_temp, control_temp,
- max_allocatable_power);
+ power_range = pid_controller(tz, control_temp, max_allocatable_power);
divvy_up_power(weighted_req_power, max_power, num_actors,
total_weighted_req_power, power_range, granted_power,
@@ -444,8 +440,8 @@
trace_thermal_power_allocator(tz, req_power, total_req_power,
granted_power, total_granted_power,
num_actors, power_range,
- max_allocatable_power, current_temp,
- control_temp - current_temp);
+ max_allocatable_power, tz->temperature,
+ control_temp - tz->temperature);
kfree(req_power);
unlock:
@@ -612,7 +608,7 @@
static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
{
int ret;
- int switch_on_temp, control_temp, current_temp;
+ int switch_on_temp, control_temp;
struct power_allocator_params *params = tz->governor_data;
/*
@@ -622,15 +618,9 @@
if (trip != params->trip_max_desired_temperature)
return 0;
- ret = thermal_zone_get_temp(tz, ¤t_temp);
- if (ret) {
- dev_warn(&tz->device, "Failed to get temperature: %d\n", ret);
- return ret;
- }
-
ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
&switch_on_temp);
- if (!ret && (current_temp < switch_on_temp)) {
+ if (!ret && (tz->temperature < switch_on_temp)) {
tz->passive = 0;
reset_pid_controller(params);
allow_maximum_power(tz);
@@ -648,7 +638,7 @@
return ret;
}
- return allocate_power(tz, current_temp, control_temp);
+ return allocate_power(tz, control_temp);
}
static struct thermal_governor thermal_gov_power_allocator = {
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 5d4ae7d..13d01ed 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -361,6 +361,24 @@
/*
* platform functions
*/
+static int rcar_thermal_remove(struct platform_device *pdev)
+{
+ struct rcar_thermal_common *common = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ struct rcar_thermal_priv *priv;
+
+ rcar_thermal_for_each_priv(priv, common) {
+ if (rcar_has_irq_support(priv))
+ rcar_thermal_irq_disable(priv);
+ thermal_zone_device_unregister(priv->zone);
+ }
+
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
static int rcar_thermal_probe(struct platform_device *pdev)
{
struct rcar_thermal_common *common;
@@ -377,6 +395,8 @@
if (!common)
return -ENOMEM;
+ platform_set_drvdata(pdev, common);
+
INIT_LIST_HEAD(&common->head);
spin_lock_init(&common->lock);
common->dev = dev;
@@ -454,43 +474,16 @@
rcar_thermal_common_write(common, ENR, enr_bits);
}
- platform_set_drvdata(pdev, common);
-
dev_info(dev, "%d sensor probed\n", i);
return 0;
error_unregister:
- rcar_thermal_for_each_priv(priv, common) {
- if (rcar_has_irq_support(priv))
- rcar_thermal_irq_disable(priv);
- thermal_zone_device_unregister(priv->zone);
- }
-
- pm_runtime_put(dev);
- pm_runtime_disable(dev);
+ rcar_thermal_remove(pdev);
return ret;
}
-static int rcar_thermal_remove(struct platform_device *pdev)
-{
- struct rcar_thermal_common *common = platform_get_drvdata(pdev);
- struct device *dev = &pdev->dev;
- struct rcar_thermal_priv *priv;
-
- rcar_thermal_for_each_priv(priv, common) {
- if (rcar_has_irq_support(priv))
- rcar_thermal_irq_disable(priv);
- thermal_zone_device_unregister(priv->zone);
- }
-
- pm_runtime_put(dev);
- pm_runtime_disable(dev);
-
- return 0;
-}
-
static const struct of_device_id rcar_thermal_dt_ids[] = {
{ .compatible = "renesas,rcar-thermal", },
{},
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 9787e8a..e845841 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1,6 +1,9 @@
/*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
+ * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd
+ * Caesar Wang <wxt@rock-chips.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
@@ -45,17 +48,50 @@
};
/**
- * The system has three Temperature Sensors. channel 0 is reserved,
- * channel 1 is for CPU, and channel 2 is for GPU.
+ * The system has two Temperature Sensors.
+ * sensor0 is for CPU, and sensor1 is for GPU.
*/
enum sensor_id {
- SENSOR_CPU = 1,
+ SENSOR_CPU = 0,
SENSOR_GPU,
};
+/**
+* The conversion table has the adc value and temperature.
+* ADC_DECREMENT is the adc value decremnet.(e.g. v2_code_table)
+* ADC_INCREMNET is the adc value incremnet.(e.g. v3_code_table)
+*/
+enum adc_sort_mode {
+ ADC_DECREMENT = 0,
+ ADC_INCREMENT,
+};
+
+/**
+ * The max sensors is two in rockchip SoCs.
+ * Two sensors: CPU and GPU sensor.
+ */
+#define SOC_MAX_SENSORS 2
+
+struct chip_tsadc_table {
+ const struct tsadc_table *id;
+
+ /* the array table size*/
+ unsigned int length;
+
+ /* that analogic mask data */
+ u32 data_mask;
+
+ /* the sort mode is adc value that increment or decrement in table */
+ enum adc_sort_mode mode;
+};
+
struct rockchip_tsadc_chip {
+ /* The sensor id of chip correspond to the ADC channel */
+ int chn_id[SOC_MAX_SENSORS];
+ int chn_num;
+
/* The hardware-controlled tshut property */
- long tshut_temp;
+ int tshut_temp;
enum tshut_mode tshut_mode;
enum tshut_polarity tshut_polarity;
@@ -65,37 +101,40 @@
void (*control)(void __iomem *reg, bool on);
/* Per-sensor methods */
- int (*get_temp)(int chn, void __iomem *reg, int *temp);
- void (*set_tshut_temp)(int chn, void __iomem *reg, long temp);
+ int (*get_temp)(struct chip_tsadc_table table,
+ int chn, void __iomem *reg, int *temp);
+ void (*set_tshut_temp)(struct chip_tsadc_table table,
+ int chn, void __iomem *reg, int temp);
void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
+
+ /* Per-table methods */
+ struct chip_tsadc_table table;
};
struct rockchip_thermal_sensor {
struct rockchip_thermal_data *thermal;
struct thermal_zone_device *tzd;
- enum sensor_id id;
+ int id;
};
-#define NUM_SENSORS 2 /* Ignore unused sensor 0 */
-
struct rockchip_thermal_data {
const struct rockchip_tsadc_chip *chip;
struct platform_device *pdev;
struct reset_control *reset;
- struct rockchip_thermal_sensor sensors[NUM_SENSORS];
+ struct rockchip_thermal_sensor sensors[SOC_MAX_SENSORS];
struct clk *clk;
struct clk *pclk;
void __iomem *regs;
- long tshut_temp;
+ int tshut_temp;
enum tshut_mode tshut_mode;
enum tshut_polarity tshut_polarity;
};
-/* TSADC V2 Sensor info define: */
+/* TSADC Sensor info define: */
#define TSADCV2_AUTO_CON 0x04
#define TSADCV2_INT_EN 0x08
#define TSADCV2_INT_PD 0x0c
@@ -117,6 +156,8 @@
#define TSADCV2_INT_PD_CLEAR_MASK ~BIT(8)
#define TSADCV2_DATA_MASK 0xfff
+#define TSADCV3_DATA_MASK 0x3ff
+
#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4
#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4
#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */
@@ -124,7 +165,7 @@
struct tsadc_table {
u32 code;
- long temp;
+ int temp;
};
static const struct tsadc_table v2_code_table[] = {
@@ -165,21 +206,61 @@
{3421, 125000},
};
-static u32 rk_tsadcv2_temp_to_code(long temp)
+static const struct tsadc_table v3_code_table[] = {
+ {0, -40000},
+ {106, -40000},
+ {108, -35000},
+ {110, -30000},
+ {112, -25000},
+ {114, -20000},
+ {116, -15000},
+ {118, -10000},
+ {120, -5000},
+ {122, 0},
+ {124, 5000},
+ {126, 10000},
+ {128, 15000},
+ {130, 20000},
+ {132, 25000},
+ {134, 30000},
+ {136, 35000},
+ {138, 40000},
+ {140, 45000},
+ {142, 50000},
+ {144, 55000},
+ {146, 60000},
+ {148, 65000},
+ {150, 70000},
+ {152, 75000},
+ {154, 80000},
+ {156, 85000},
+ {158, 90000},
+ {160, 95000},
+ {162, 100000},
+ {163, 105000},
+ {165, 110000},
+ {167, 115000},
+ {169, 120000},
+ {171, 125000},
+ {TSADCV3_DATA_MASK, 125000},
+};
+
+static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
+ int temp)
{
int high, low, mid;
low = 0;
- high = ARRAY_SIZE(v2_code_table) - 1;
+ high = table.length - 1;
mid = (high + low) / 2;
- if (temp < v2_code_table[low].temp || temp > v2_code_table[high].temp)
+ if (temp < table.id[low].temp || temp > table.id[high].temp)
return 0;
while (low <= high) {
- if (temp == v2_code_table[mid].temp)
- return v2_code_table[mid].code;
- else if (temp < v2_code_table[mid].temp)
+ if (temp == table.id[mid].temp)
+ return table.id[mid].code;
+ else if (temp < table.id[mid].temp)
high = mid - 1;
else
low = mid + 1;
@@ -189,29 +270,54 @@
return 0;
}
-static int rk_tsadcv2_code_to_temp(u32 code, int *temp)
+static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code,
+ int *temp)
{
unsigned int low = 1;
- unsigned int high = ARRAY_SIZE(v2_code_table) - 1;
+ unsigned int high = table.length - 1;
unsigned int mid = (low + high) / 2;
unsigned int num;
unsigned long denom;
- BUILD_BUG_ON(ARRAY_SIZE(v2_code_table) < 2);
+ WARN_ON(table.length < 2);
- code &= TSADCV2_DATA_MASK;
- if (code < v2_code_table[high].code)
- return -EAGAIN; /* Incorrect reading */
+ switch (table.mode) {
+ case ADC_DECREMENT:
+ code &= table.data_mask;
+ if (code < table.id[high].code)
+ return -EAGAIN; /* Incorrect reading */
- while (low <= high) {
- if (code >= v2_code_table[mid].code &&
- code < v2_code_table[mid - 1].code)
- break;
- else if (code < v2_code_table[mid].code)
- low = mid + 1;
- else
- high = mid - 1;
- mid = (low + high) / 2;
+ while (low <= high) {
+ if (code >= table.id[mid].code &&
+ code < table.id[mid - 1].code)
+ break;
+ else if (code < table.id[mid].code)
+ low = mid + 1;
+ else
+ high = mid - 1;
+
+ mid = (low + high) / 2;
+ }
+ break;
+ case ADC_INCREMENT:
+ code &= table.data_mask;
+ if (code < table.id[low].code)
+ return -EAGAIN; /* Incorrect reading */
+
+ while (low <= high) {
+ if (code >= table.id[mid - 1].code &&
+ code < table.id[mid].code)
+ break;
+ else if (code > table.id[mid].code)
+ low = mid + 1;
+ else
+ high = mid - 1;
+
+ mid = (low + high) / 2;
+ }
+ break;
+ default:
+ pr_err("Invalid the conversion table\n");
}
/*
@@ -220,24 +326,28 @@
* temperature between 2 table entries is linear and interpolate
* to produce less granular result.
*/
- num = v2_code_table[mid].temp - v2_code_table[mid - 1].temp;
- num *= v2_code_table[mid - 1].code - code;
- denom = v2_code_table[mid - 1].code - v2_code_table[mid].code;
- *temp = v2_code_table[mid - 1].temp + (num / denom);
+ num = table.id[mid].temp - v2_code_table[mid - 1].temp;
+ num *= abs(table.id[mid - 1].code - code);
+ denom = abs(table.id[mid - 1].code - table.id[mid].code);
+ *temp = table.id[mid - 1].temp + (num / denom);
return 0;
}
/**
- * rk_tsadcv2_initialize - initialize TASDC Controller
- * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between
- * every two accessing of TSADC in normal operation.
- * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between
- * every two accessing of TSADC after the temperature is higher
- * than COM_SHUT or COM_INT.
- * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE,
- * if the temperature is higher than COMP_INT or COMP_SHUT for
- * "debounce" times, TSADC controller will generate interrupt or TSHUT.
+ * rk_tsadcv2_initialize - initialize TASDC Controller.
+ *
+ * (1) Set TSADC_V2_AUTO_PERIOD:
+ * Configure the interleave between every two accessing of
+ * TSADC in normal operation.
+ *
+ * (2) Set TSADCV2_AUTO_PERIOD_HT:
+ * Configure the interleave between every two accessing of
+ * TSADC after the temperature is higher than COM_SHUT or COM_INT.
+ *
+ * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE:
+ * If the temperature is higher than COMP_INT or COMP_SHUT for
+ * "debounce" times, TSADC controller will generate interrupt or TSHUT.
*/
static void rk_tsadcv2_initialize(void __iomem *regs,
enum tshut_polarity tshut_polarity)
@@ -279,20 +389,22 @@
writel_relaxed(val, regs + TSADCV2_AUTO_CON);
}
-static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, int *temp)
+static int rk_tsadcv2_get_temp(struct chip_tsadc_table table,
+ int chn, void __iomem *regs, int *temp)
{
u32 val;
val = readl_relaxed(regs + TSADCV2_DATA(chn));
- return rk_tsadcv2_code_to_temp(val, temp);
+ return rk_tsadcv2_code_to_temp(table, val, temp);
}
-static void rk_tsadcv2_tshut_temp(int chn, void __iomem *regs, long temp)
+static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table,
+ int chn, void __iomem *regs, int temp)
{
u32 tshut_value, val;
- tshut_value = rk_tsadcv2_temp_to_code(temp);
+ tshut_value = rk_tsadcv2_temp_to_code(table, temp);
writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
/* TSHUT will be valid */
@@ -318,6 +430,10 @@
}
static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
+ .chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
+ .chn_num = 2, /* two channels for tsadc */
+
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
@@ -328,6 +444,37 @@
.get_temp = rk_tsadcv2_get_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = v2_code_table,
+ .length = ARRAY_SIZE(v2_code_table),
+ .data_mask = TSADCV2_DATA_MASK,
+ .mode = ADC_DECREMENT,
+ },
+};
+
+static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+ .chn_num = 2, /* two channels for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv2_initialize,
+ .irq_ack = rk_tsadcv2_irq_ack,
+ .control = rk_tsadcv2_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = v3_code_table,
+ .length = ARRAY_SIZE(v3_code_table),
+ .data_mask = TSADCV3_DATA_MASK,
+ .mode = ADC_INCREMENT,
+ },
};
static const struct of_device_id of_rockchip_thermal_match[] = {
@@ -335,6 +482,10 @@
.compatible = "rockchip,rk3288-tsadc",
.data = (void *)&rk3288_tsadc_data,
},
+ {
+ .compatible = "rockchip,rk3368-tsadc",
+ .data = (void *)&rk3368_tsadc_data,
+ },
{ /* end */ },
};
MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
@@ -357,7 +508,7 @@
thermal->chip->irq_ack(thermal->regs);
- for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ for (i = 0; i < thermal->chip->chn_num; i++)
thermal_zone_device_update(thermal->sensors[i].tzd);
return IRQ_HANDLED;
@@ -370,7 +521,8 @@
const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip;
int retval;
- retval = tsadc->get_temp(sensor->id, thermal->regs, out_temp);
+ retval = tsadc->get_temp(tsadc->table,
+ sensor->id, thermal->regs, out_temp);
dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n",
sensor->id, *out_temp, retval);
@@ -389,7 +541,7 @@
if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
dev_warn(dev,
- "Missing tshut temp property, using default %ld\n",
+ "Missing tshut temp property, using default %d\n",
thermal->chip->tshut_temp);
thermal->tshut_temp = thermal->chip->tshut_temp;
} else {
@@ -397,7 +549,7 @@
}
if (thermal->tshut_temp > INT_MAX) {
- dev_err(dev, "Invalid tshut temperature specified: %ld\n",
+ dev_err(dev, "Invalid tshut temperature specified: %d\n",
thermal->tshut_temp);
return -ERANGE;
}
@@ -442,13 +594,14 @@
rockchip_thermal_register_sensor(struct platform_device *pdev,
struct rockchip_thermal_data *thermal,
struct rockchip_thermal_sensor *sensor,
- enum sensor_id id)
+ int id)
{
const struct rockchip_tsadc_chip *tsadc = thermal->chip;
int error;
tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
- tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp);
+ tsadc->set_tshut_temp(tsadc->table, id, thermal->regs,
+ thermal->tshut_temp);
sensor->thermal = thermal;
sensor->id = id;
@@ -481,7 +634,7 @@
const struct of_device_id *match;
struct resource *res;
int irq;
- int i;
+ int i, j;
int error;
match = of_match_node(of_rockchip_thermal_match, np);
@@ -556,22 +709,19 @@
thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
- error = rockchip_thermal_register_sensor(pdev, thermal,
- &thermal->sensors[0],
- SENSOR_CPU);
- if (error) {
- dev_err(&pdev->dev,
- "failed to register CPU thermal sensor: %d\n", error);
- goto err_disable_pclk;
- }
-
- error = rockchip_thermal_register_sensor(pdev, thermal,
- &thermal->sensors[1],
- SENSOR_GPU);
- if (error) {
- dev_err(&pdev->dev,
- "failed to register GPU thermal sensor: %d\n", error);
- goto err_unregister_cpu_sensor;
+ for (i = 0; i < thermal->chip->chn_num; i++) {
+ error = rockchip_thermal_register_sensor(pdev, thermal,
+ &thermal->sensors[i],
+ thermal->chip->chn_id[i]);
+ if (error) {
+ dev_err(&pdev->dev,
+ "failed to register sensor[%d] : error = %d\n",
+ i, error);
+ for (j = 0; j < i; j++)
+ thermal_zone_of_sensor_unregister(&pdev->dev,
+ thermal->sensors[j].tzd);
+ goto err_disable_pclk;
+ }
}
error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
@@ -581,22 +731,23 @@
if (error) {
dev_err(&pdev->dev,
"failed to request tsadc irq: %d\n", error);
- goto err_unregister_gpu_sensor;
+ goto err_unregister_sensor;
}
thermal->chip->control(thermal->regs, true);
- for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ for (i = 0; i < thermal->chip->chn_num; i++)
rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
platform_set_drvdata(pdev, thermal);
return 0;
-err_unregister_gpu_sensor:
- thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[1].tzd);
-err_unregister_cpu_sensor:
- thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[0].tzd);
+err_unregister_sensor:
+ while (i--)
+ thermal_zone_of_sensor_unregister(&pdev->dev,
+ thermal->sensors[i].tzd);
+
err_disable_pclk:
clk_disable_unprepare(thermal->pclk);
err_disable_clk:
@@ -610,7 +761,7 @@
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) {
+ for (i = 0; i < thermal->chip->chn_num; i++) {
struct rockchip_thermal_sensor *sensor = &thermal->sensors[i];
rockchip_thermal_toggle_sensor(sensor, false);
@@ -631,7 +782,7 @@
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ for (i = 0; i < thermal->chip->chn_num; i++)
rockchip_thermal_toggle_sensor(&thermal->sensors[i], false);
thermal->chip->control(thermal->regs, false);
@@ -663,18 +814,19 @@
thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
- for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) {
- enum sensor_id id = thermal->sensors[i].id;
+ for (i = 0; i < thermal->chip->chn_num; i++) {
+ int id = thermal->sensors[i].id;
thermal->chip->set_tshut_mode(id, thermal->regs,
thermal->tshut_mode);
- thermal->chip->set_tshut_temp(id, thermal->regs,
+ thermal->chip->set_tshut_temp(thermal->chip->table,
+ id, thermal->regs,
thermal->tshut_temp);
}
thermal->chip->control(thermal->regs, true);
- for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ for (i = 0; i < thermal->chip->chn_num; i++)
rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
pinctrl_pm_select_default_state(dev);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 1384426..ed77614 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -169,7 +169,7 @@
{
struct n_tty_data *ldata = tty->disc_data;
- tty_audit_add_data(tty, to, n, ldata->icanon);
+ tty_audit_add_data(tty, from, n, ldata->icanon);
return copy_to_user(to, from, n);
}
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index c0533a5..910bfee 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -60,3 +60,4 @@
spin_unlock_irqrestore(&up->port.lock, flags);
return 1;
}
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index e6f5e12..6412f14 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -373,6 +373,7 @@
depends on SERIAL_8250 && PCI
select HSU_DMA if SERIAL_8250_DMA
select HSU_DMA_PCI if X86_INTEL_MID
+ select RATIONAL
help
Selecting this option will enable handling of the extra features
present on the UART found on Intel Medfield SOC and various other
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1aec440..f38beb2 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1539,7 +1539,6 @@
tristate "Freescale lpuart serial port support"
depends on HAS_DMA
select SERIAL_CORE
- select SERIAL_EARLYCON
help
Support for the on-chip lpuart on some Freescale SOCs.
@@ -1547,6 +1546,7 @@
bool "Console on Freescale lpuart serial port"
depends on SERIAL_FSL_LPUART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
If you have enabled the lpuart serial port on the Freescale SoCs,
you can make it the console by answering Y to this option.
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 681e0f3..a1c0a89 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -474,7 +474,7 @@
/* register irq and enable rx interrupts */
ret = request_irq(port->irq, bcm_uart_interrupt, 0,
- bcm_uart_type(port), port);
+ dev_name(port->dev), port);
if (ret)
return ret;
bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c
index 6813e31..2f80bc7 100644
--- a/drivers/tty/serial/etraxfs-uart.c
+++ b/drivers/tty/serial/etraxfs-uart.c
@@ -894,7 +894,7 @@
up->regi_ser = of_iomap(np, 0);
up->port.dev = &pdev->dev;
- up->gpios = mctrl_gpio_init(&pdev->dev, 0);
+ up->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
if (IS_ERR(up->gpios))
return PTR_ERR(up->gpios);
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index 90ca082..3d245cd 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -265,7 +265,7 @@
*
* Audit @data of @size from @tty, if necessary.
*/
-void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 0c41dbc..bcc8e1e 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1282,18 +1282,22 @@
int was_stopped = tty->stopped;
if (tty->ops->send_xchar) {
+ down_read(&tty->termios_rwsem);
tty->ops->send_xchar(tty, ch);
+ up_read(&tty->termios_rwsem);
return 0;
}
if (tty_write_lock(tty, 0) < 0)
return -ERESTARTSYS;
+ down_read(&tty->termios_rwsem);
if (was_stopped)
start_tty(tty);
tty->ops->write(tty, &ch, 1);
if (was_stopped)
stop_tty(tty);
+ up_read(&tty->termios_rwsem);
tty_write_unlock(tty);
return 0;
}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 9c5aebf..1445dd3 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -1147,16 +1147,12 @@
spin_unlock_irq(&tty->flow_lock);
break;
case TCIOFF:
- down_read(&tty->termios_rwsem);
if (STOP_CHAR(tty) != __DISABLED_CHAR)
retval = tty_send_xchar(tty, STOP_CHAR(tty));
- up_read(&tty->termios_rwsem);
break;
case TCION:
- down_read(&tty->termios_rwsem);
if (START_CHAR(tty) != __DISABLED_CHAR)
retval = tty_send_xchar(tty, START_CHAR(tty));
- up_read(&tty->termios_rwsem);
break;
default:
return -EINVAL;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 5af8f18..629e3c8 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -592,7 +592,7 @@
/* Restart the work queue in case no characters kick it off. Safe if
already running */
- schedule_work(&tty->port->buf.work);
+ tty_buffer_restart_work(tty->port);
tty_unlock(tty);
return retval;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 6ccbf60..5a048b7 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -84,6 +84,12 @@
struct imx_usbmisc_data *usbmisc_data;
bool supports_runtime_pm;
bool in_lpm;
+ /* SoC before i.mx6 (except imx23/imx28) needs three clks */
+ bool need_three_clks;
+ struct clk *clk_ipg;
+ struct clk *clk_ahb;
+ struct clk *clk_per;
+ /* --------------------------------- */
};
/* Common functions shared by usbmisc drivers */
@@ -135,6 +141,102 @@
}
/* End of common functions shared by usbmisc drivers*/
+static int imx_get_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ data->clk_ipg = devm_clk_get(dev, "ipg");
+ if (IS_ERR(data->clk_ipg)) {
+ /* If the platform only needs one clocks */
+ data->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(data->clk)) {
+ ret = PTR_ERR(data->clk);
+ dev_err(dev,
+ "Failed to get clks, err=%ld,%ld\n",
+ PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
+ return ret;
+ }
+ return ret;
+ }
+
+ data->clk_ahb = devm_clk_get(dev, "ahb");
+ if (IS_ERR(data->clk_ahb)) {
+ ret = PTR_ERR(data->clk_ahb);
+ dev_err(dev,
+ "Failed to get ahb clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->clk_per = devm_clk_get(dev, "per");
+ if (IS_ERR(data->clk_per)) {
+ ret = PTR_ERR(data->clk_per);
+ dev_err(dev,
+ "Failed to get per clock, err=%d\n", ret);
+ return ret;
+ }
+
+ data->need_three_clks = true;
+ return ret;
+}
+
+static int imx_prepare_enable_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (data->need_three_clks) {
+ ret = clk_prepare_enable(data->clk_ipg);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ipg clk, err=%d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_ahb);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable ahb clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_per);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable per clk, err=%d\n",
+ ret);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ return ret;
+ }
+ } else {
+ ret = clk_prepare_enable(data->clk);
+ if (ret) {
+ dev_err(dev,
+ "Failed to prepare/enable clk, err=%d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void imx_disable_unprepare_clks(struct device *dev)
+{
+ struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+ if (data->need_three_clks) {
+ clk_disable_unprepare(data->clk_per);
+ clk_disable_unprepare(data->clk_ahb);
+ clk_disable_unprepare(data->clk_ipg);
+ } else {
+ clk_disable_unprepare(data->clk);
+ }
+}
static int ci_hdrc_imx_probe(struct platform_device *pdev)
{
@@ -145,31 +247,31 @@
.flags = CI_HDRC_SET_NON_ZERO_TTHA,
};
int ret;
- const struct of_device_id *of_id =
- of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
- const struct ci_hdrc_imx_platform_flag *imx_platform_flag = of_id->data;
+ const struct of_device_id *of_id;
+ const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
+
+ of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
+ imx_platform_flag = of_id->data;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
+ platform_set_drvdata(pdev, data);
data->usbmisc_data = usbmisc_get_init_data(&pdev->dev);
if (IS_ERR(data->usbmisc_data))
return PTR_ERR(data->usbmisc_data);
- data->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->clk)) {
- dev_err(&pdev->dev,
- "Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
- return PTR_ERR(data->clk);
- }
-
- ret = clk_prepare_enable(data->clk);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to prepare or enable clock, err=%d\n", ret);
+ ret = imx_get_clks(&pdev->dev);
+ if (ret)
return ret;
- }
+
+ ret = imx_prepare_enable_clks(&pdev->dev);
+ if (ret)
+ return ret;
data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
if (IS_ERR(data->phy)) {
@@ -212,8 +314,6 @@
goto disable_device;
}
- platform_set_drvdata(pdev, data);
-
if (data->supports_runtime_pm) {
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -226,7 +326,7 @@
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
err_clk:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return ret;
}
@@ -240,7 +340,7 @@
pm_runtime_put_noidle(&pdev->dev);
}
ci_hdrc_remove_device(data->ci_pdev);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(&pdev->dev);
return 0;
}
@@ -252,7 +352,7 @@
dev_dbg(dev, "at %s\n", __func__);
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
data->in_lpm = true;
return 0;
@@ -270,7 +370,7 @@
return 0;
}
- ret = clk_prepare_enable(data->clk);
+ ret = imx_prepare_enable_clks(dev);
if (ret)
return ret;
@@ -285,7 +385,7 @@
return 0;
clk_disable:
- clk_disable_unprepare(data->clk);
+ imx_disable_unprepare_clks(dev);
return ret;
}
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 080b7be..58c8485 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -322,8 +322,10 @@
return -EINVAL;
pm_runtime_get_sync(ci->dev);
+ disable_irq(ci->irq);
ci_role_stop(ci);
ret = ci_role_start(ci, role);
+ enable_irq(ci->irq);
pm_runtime_put_sync(ci->dev);
return ret ? ret : count;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 8223fe7..391a122 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1751,6 +1751,22 @@
return retval;
}
+static void ci_udc_stop_for_otg_fsm(struct ci_hdrc *ci)
+{
+ if (!ci_otg_is_fsm_mode(ci))
+ return;
+
+ mutex_lock(&ci->fsm.lock);
+ if (ci->fsm.otg->state == OTG_STATE_A_PERIPHERAL) {
+ ci->fsm.a_bidl_adis_tmout = 1;
+ ci_hdrc_otg_fsm_start(ci);
+ } else if (ci->fsm.otg->state == OTG_STATE_B_PERIPHERAL) {
+ ci->fsm.protocol = PROTO_UNDEF;
+ ci->fsm.otg->state = OTG_STATE_UNDEFINED;
+ }
+ mutex_unlock(&ci->fsm.lock);
+}
+
/**
* ci_udc_stop: unregister a gadget driver
*/
@@ -1775,6 +1791,7 @@
ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
+ ci_udc_stop_for_otg_fsm(ci);
return 0;
}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index fcea4eb..ab8b027 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -500,7 +500,11 @@
{
struct resource *res;
struct imx_usbmisc *data;
- struct of_device_id *tmp_dev;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -513,9 +517,7 @@
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- tmp_dev = (struct of_device_id *)
- of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
- data->ops = (const struct usbmisc_ops *)tmp_dev->data;
+ data->ops = (const struct usbmisc_ops *)of_id->data;
platform_set_drvdata(pdev, data);
return 0;
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index 433bbc3..071964c 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -884,11 +884,11 @@
add_wait_queue(&usblp->wwait, &waita);
for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
if (mutex_lock_interruptible(&usblp->mut)) {
rc = -EINTR;
break;
}
+ set_current_state(TASK_INTERRUPTIBLE);
rc = usblp_wtest(usblp, nonblock);
mutex_unlock(&usblp->mut);
if (rc <= 0)
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index a99c89e..dd28010 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -77,8 +77,7 @@
config USB_OTG_FSM
tristate "USB 2.0 OTG FSM implementation"
- depends on USB
- select USB_OTG
+ depends on USB && USB_OTG
select USB_PHY
help
Implements OTG Finite State Machine as specified in On-The-Go
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e79baf7..571c217 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -324,12 +324,13 @@
*/
static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
{
- if (hsotg->lx_state == DWC2_L2) {
+ if (hsotg->bus_suspended) {
hsotg->flags.b.port_suspend_change = 1;
usb_hcd_resume_root_hub(hsotg->priv);
- } else {
- hsotg->flags.b.port_l1_change = 1;
}
+
+ if (hsotg->lx_state == DWC2_L1)
+ hsotg->flags.b.port_l1_change = 1;
}
/**
@@ -1428,8 +1429,8 @@
dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
dwc2_readl(hsotg->regs + HPRT0));
- hsotg->bus_suspended = 0;
dwc2_hcd_rem_wakeup(hsotg);
+ hsotg->bus_suspended = 0;
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 5859b0f..e61d773 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -108,7 +108,8 @@
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
- .ahbcfg = 0x7, /* INCR16 */
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
+ GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 77a622c..009d830 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -34,6 +34,8 @@
#define PCI_DEVICE_ID_INTEL_BSW 0x22b7
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
+#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
+#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
@@ -210,6 +212,8 @@
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 55ba447..e24a01c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2744,12 +2744,34 @@
}
dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.max_speed = USB_SPEED_SUPER;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
/*
+ * FIXME We might be setting max_speed to <SUPER, however versions
+ * <2.20a of dwc3 have an issue with metastability (documented
+ * elsewhere in this driver) which tells us we can't set max speed to
+ * anything lower than SUPER.
+ *
+ * Because gadget.max_speed is only used by composite.c and function
+ * drivers (i.e. it won't go into dwc3's registers) we are allowing this
+ * to happen so we avoid sending SuperSpeed Capability descriptor
+ * together with our BOS descriptor as that could confuse host into
+ * thinking we can handle super speed.
+ *
+ * Note that, in fact, we won't even support GetBOS requests when speed
+ * is less than super speed because we don't have means, yet, to tell
+ * composite.c that we are USB 2.0 + LPM ECN.
+ */
+ if (dwc->revision < DWC3_REVISION_220A)
+ dwc3_trace(trace_dwc3_gadget,
+ "Changing max_speed on rev %08x\n",
+ dwc->revision);
+
+ dwc->gadget.max_speed = dwc->maximum_speed;
+
+ /*
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
* on ep out.
*/
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
index 23933bd..ddc3aad 100644
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -329,7 +329,7 @@
for (i = 0; i < loop->qlen && result == 0; i++) {
result = -ENOMEM;
- in_req = usb_ep_alloc_request(loop->in_ep, GFP_KERNEL);
+ in_req = usb_ep_alloc_request(loop->in_ep, GFP_ATOMIC);
if (!in_req)
goto fail;
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index f0f2b06..f92f5af 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1633,7 +1633,7 @@
spin_lock(&udc->lock);
int_enb = usba_int_enb_get(udc);
- status = usba_readl(udc, INT_STA) & int_enb;
+ status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 5d2d7e9..0230965 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -782,12 +782,15 @@
status |= USB_PORT_STAT_SUSPEND;
}
}
- if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0
- && (raw_port_status & PORT_POWER)
- && (bus_state->suspended_ports & (1 << wIndex))) {
- bus_state->suspended_ports &= ~(1 << wIndex);
- if (hcd->speed < HCD_USB3)
- bus_state->port_c_suspend |= 1 << wIndex;
+ if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 &&
+ (raw_port_status & PORT_POWER)) {
+ if (bus_state->suspended_ports & (1 << wIndex)) {
+ bus_state->suspended_ports &= ~(1 << wIndex);
+ if (hcd->speed < HCD_USB3)
+ bus_state->port_c_suspend |= 1 << wIndex;
+ }
+ bus_state->resume_done[wIndex] = 0;
+ clear_bit(wIndex, &bus_state->resuming_ports);
}
if (raw_port_status & PORT_CONNECT) {
status |= USB_PORT_STAT_CONNECTION;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fa83625..6c5e813 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3896,28 +3896,6 @@
return ret;
}
-static int ep_ring_is_processing(struct xhci_hcd *xhci,
- int slot_id, unsigned int ep_index)
-{
- struct xhci_virt_device *xdev;
- struct xhci_ring *ep_ring;
- struct xhci_ep_ctx *ep_ctx;
- struct xhci_virt_ep *xep;
- dma_addr_t hw_deq;
-
- xdev = xhci->devs[slot_id];
- xep = &xhci->devs[slot_id]->eps[ep_index];
- ep_ring = xep->ring;
- ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
-
- if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) != EP_STATE_RUNNING)
- return 0;
-
- hw_deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
- return (hw_deq !=
- xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue));
-}
-
/*
* Check transfer ring to guarantee there is enough room for the urb.
* Update ISO URB start_frame and interval.
@@ -3983,10 +3961,12 @@
}
/* Calculate the start frame and put it in urb->start_frame. */
- if (HCC_CFC(xhci->hcc_params) &&
- ep_ring_is_processing(xhci, slot_id, ep_index)) {
- urb->start_frame = xep->next_frame_id;
- goto skip_start_over;
+ if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
+ if ((le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
+ EP_STATE_RUNNING) {
+ urb->start_frame = xep->next_frame_id;
+ goto skip_start_over;
+ }
}
start_frame = readl(&xhci->run_regs->microframe_index);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6e7dc6f..dfa44d3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -175,6 +175,16 @@
command |= CMD_RESET;
writel(command, &xhci->op_regs->command);
+ /* Existing Intel xHCI controllers require a delay of 1 mS,
+ * after setting the CMD_RESET bit, and before accessing any
+ * HC registers. This allows the HC to complete the
+ * reset operation and be ready for HC register access.
+ * Without this delay, the subsequent HC register access,
+ * may result in a system hang very rarely.
+ */
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ udelay(1000);
+
ret = xhci_handshake(&xhci->op_regs->command,
CMD_RESET, 0, 10 * 1000 * 1000);
if (ret)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ba13529..18cfc0a 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -132,7 +132,7 @@
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
@@ -151,7 +151,7 @@
* ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
*/
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
@@ -176,7 +176,7 @@
return ret;
}
-static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
@@ -191,8 +191,8 @@
power &= ~MUSB_POWER_SUSPENDM;
musb_writeb(addr, MUSB_POWER, power);
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
- musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
+ musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
@@ -1668,7 +1668,7 @@
static bool use_dma = 1;
/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
+module_param(use_dma, bool, 0644);
MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 26c65e6..795a45b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -112,22 +112,32 @@
struct musb *musb = ep->musb;
void __iomem *epio = ep->regs;
u16 csr;
- u16 lastcsr = 0;
int retries = 1000;
csr = musb_readw(epio, MUSB_TXCSR);
while (csr & MUSB_TXCSR_FIFONOTEMPTY) {
- if (csr != lastcsr)
- dev_dbg(musb->controller, "Host TX FIFONOTEMPTY csr: %02x\n", csr);
- lastcsr = csr;
csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_TXPKTRDY;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
- if (WARN(retries-- < 1,
+
+ /*
+ * FIXME: sometimes the tx fifo flush failed, it has been
+ * observed during device disconnect on AM335x.
+ *
+ * To reproduce the issue, ensure tx urb(s) are queued when
+ * unplug the usb device which is connected to AM335x usb
+ * host port.
+ *
+ * I found using a usb-ethernet device and running iperf
+ * (client on AM335x) has very high chance to trigger it.
+ *
+ * Better to turn on dev_dbg() in musb_cleanup_urb() with
+ * CPPI enabled to see the issue when aborting the tx channel.
+ */
+ if (dev_WARN_ONCE(musb->controller, retries-- < 1,
"Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr))
return;
- mdelay(1);
}
}
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 1731324..22e8ecb 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -21,7 +21,6 @@
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
- select USB_OTG
select USB_PHY
help
Enable this to support Freescale USB OTG transceiver.
@@ -168,8 +167,7 @@
config USB_MV_OTG
tristate "Marvell USB OTG support"
- depends on USB_EHCI_MV && USB_MV_UDC && PM
- select USB_OTG
+ depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
select USB_PHY
help
Say Y here if you want to build Marvell USB OTG transciever
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 4d863eb..b7536af 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -452,10 +452,13 @@
struct clk *clk;
struct mxs_phy *mxs_phy;
int ret;
- const struct of_device_id *of_id =
- of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ const struct of_device_id *of_id;
struct device_node *np = pdev->dev.of_node;
+ of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ if (!of_id)
+ return -ENODEV;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index 1270906..c4bf2de 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -105,7 +105,6 @@
extcon = extcon_get_extcon_dev(config->extcon);
if (!extcon)
return -EPROBE_DEFER;
- otg_dev->extcon = extcon;
otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
if (!otg_dev)
@@ -115,6 +114,7 @@
if (IS_ERR(otg_dev->base))
return PTR_ERR(otg_dev->base);
+ otg_dev->extcon = extcon;
otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 685fef7..f228060 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -161,6 +161,7 @@
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
#define NOVATELWIRELESS_PRODUCT_E362 0x9010
#define NOVATELWIRELESS_PRODUCT_E371 0x9011
+#define NOVATELWIRELESS_PRODUCT_U620L 0x9022
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
@@ -354,6 +355,7 @@
/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick *
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+#define FOUR_G_SYSTEMS_PRODUCT_W100 0x9b01
/* iBall 3.5G connect wireless modem */
#define IBALL_3_5G_CONNECT 0x9605
@@ -519,6 +521,11 @@
.sendsetup = BIT(0) | BIT(1),
};
+static const struct option_blacklist_info four_g_w100_blacklist = {
+ .sendsetup = BIT(1) | BIT(2),
+ .reserved = BIT(3),
+};
+
static const struct option_blacklist_info alcatel_x200_blacklist = {
.sendsetup = BIT(0) | BIT(1),
.reserved = BIT(4),
@@ -1052,6 +1059,7 @@
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U620L, 0xff, 0x00, 0x00) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -1641,6 +1649,9 @@
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100),
+ .driver_info = (kernel_ulong_t)&four_g_w100_blacklist
+ },
{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 5022fcf..9919d2a 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -22,6 +22,8 @@
#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"
+#define QUECTEL_EC20_PID 0x9215
+
/* standard device layouts supported by this driver */
enum qcserial_layouts {
QCSERIAL_G2K = 0, /* Gobi 2000 */
@@ -171,6 +173,38 @@
};
MODULE_DEVICE_TABLE(usb, id_table);
+static int handle_quectel_ec20(struct device *dev, int ifnum)
+{
+ int altsetting = 0;
+
+ /*
+ * Quectel EC20 Mini PCIe LTE module layout:
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
+ * 1: NMEA
+ * 2: AT-capable modem port
+ * 3: Modem interface
+ * 4: NDIS
+ */
+ switch (ifnum) {
+ case 0:
+ dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
+ break;
+ case 1:
+ dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
+ break;
+ case 2:
+ case 3:
+ dev_dbg(dev, "Quectel EC20 Modem port found\n");
+ break;
+ case 4:
+ /* Don't claim the QMI/net interface */
+ altsetting = -1;
+ break;
+ }
+
+ return altsetting;
+}
+
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
struct usb_host_interface *intf = serial->interface->cur_altsetting;
@@ -181,6 +215,10 @@
int altsetting = -1;
bool sendsetup = false;
+ /* we only support vendor specific functions */
+ if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+ goto done;
+
nintf = serial->dev->actconfig->desc.bNumInterfaces;
dev_dbg(dev, "Num Interfaces = %d\n", nintf);
ifnum = intf->desc.bInterfaceNumber;
@@ -240,6 +278,12 @@
altsetting = -1;
break;
case QCSERIAL_G2K:
+ /* handle non-standard layouts */
+ if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
+ altsetting = handle_quectel_ec20(dev, ifnum);
+ goto done;
+ }
+
/*
* Gobi 2K+ USB layout:
* 0: QMI/net
@@ -301,29 +345,39 @@
break;
case QCSERIAL_HWI:
/*
- * Huawei layout:
- * 0: AT-capable modem port
- * 1: DM/DIAG
- * 2: AT-capable modem port
- * 3: CCID-compatible PCSC interface
- * 4: QMI/net
- * 5: NMEA
+ * Huawei devices map functions by subclass + protocol
+ * instead of interface numbers. The protocol identify
+ * a specific function, while the subclass indicate a
+ * specific firmware source
+ *
+ * This is a blacklist of functions known to be
+ * non-serial. The rest are assumed to be serial and
+ * will be handled by this driver
*/
- switch (ifnum) {
- case 0:
- case 2:
- dev_dbg(dev, "Modem port found\n");
- break;
- case 1:
- dev_dbg(dev, "DM/DIAG interface found\n");
- break;
- case 5:
- dev_dbg(dev, "NMEA GPS interface found\n");
- break;
- default:
- /* don't claim any unsupported interface */
+ switch (intf->desc.bInterfaceProtocol) {
+ /* QMI combined (qmi_wwan) */
+ case 0x07:
+ case 0x37:
+ case 0x67:
+ /* QMI data (qmi_wwan) */
+ case 0x08:
+ case 0x38:
+ case 0x68:
+ /* QMI control (qmi_wwan) */
+ case 0x09:
+ case 0x39:
+ case 0x69:
+ /* NCM like (huawei_cdc_ncm) */
+ case 0x16:
+ case 0x46:
+ case 0x76:
altsetting = -1;
break;
+ default:
+ dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
+ intf->desc.bInterfaceClass,
+ intf->desc.bInterfaceSubClass,
+ intf->desc.bInterfaceProtocol);
}
break;
default:
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e9da41d..2694df2 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -159,6 +159,7 @@
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+ { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
{ } /* terminator */
};
@@ -191,6 +192,7 @@
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
+ { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
{ } /* terminator */
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 4a2423e..98f35c6 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -56,6 +56,10 @@
#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
#define ABBOTT_STRIP_PORT_ID 0x3420
+/* Honeywell vendor and product IDs */
+#define HONEYWELL_VENDOR_ID 0x10ac
+#define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
+
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7a8a6c6..1c427be 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -446,7 +446,7 @@
config IMX2_WDT
tristate "IMX2+ Watchdog"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
select REGMAP_MMIO
select WATCHDOG_CORE
help
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 6ad9df9..b751f43 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -123,6 +123,7 @@
reg = readl(wdt_base + WDT_MODE);
reg &= ~WDT_MODE_EN;
+ reg |= WDT_MODE_KEY;
iowrite32(reg, wdt_base + WDT_MODE);
return 0;
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index d96bee0..6f17c93 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -205,7 +205,7 @@
static unsigned int omap_wdt_get_timeleft(struct watchdog_device *wdog)
{
- struct omap_wdt_dev *wdev = watchdog_get_drvdata(wdog);
+ struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog);
void __iomem *base = wdev->base;
u32 value;
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 4224b3e..313cd1c 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -80,7 +80,7 @@
static DEFINE_SPINLOCK(io_lock);
static void __iomem *wdt_base;
-struct clk *wdt_clk;
+static struct clk *wdt_clk;
static int pnx4008_wdt_start(struct watchdog_device *wdd)
{
@@ -161,7 +161,7 @@
if (IS_ERR(wdt_clk))
return PTR_ERR(wdt_clk);
- ret = clk_enable(wdt_clk);
+ ret = clk_prepare_enable(wdt_clk);
if (ret)
return ret;
@@ -184,7 +184,7 @@
return 0;
disable_clk:
- clk_disable(wdt_clk);
+ clk_disable_unprepare(wdt_clk);
return ret;
}
@@ -192,7 +192,7 @@
{
watchdog_unregister_device(&pnx4008_wdd);
- clk_disable(wdt_clk);
+ clk_disable_unprepare(wdt_clk);
return 0;
}
diff --git a/drivers/watchdog/tegra_wdt.c b/drivers/watchdog/tegra_wdt.c
index 7f97cdd..9ec5760 100644
--- a/drivers/watchdog/tegra_wdt.c
+++ b/drivers/watchdog/tegra_wdt.c
@@ -140,8 +140,10 @@
{
wdd->timeout = timeout;
- if (watchdog_active(wdd))
+ if (watchdog_active(wdd)) {
+ tegra_wdt_stop(wdd);
return tegra_wdt_start(wdd);
+ }
return 0;
}
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
index 91bf55a..20e2bba 100644
--- a/drivers/watchdog/w83977f_wdt.c
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -224,7 +224,7 @@
static int wdt_set_timeout(int t)
{
- int tmrval;
+ unsigned int tmrval;
/*
* Convert seconds to watchdog counter time units, rounding up.
diff --git a/drivers/xen/events/events_base.c b/drivers/xen/events/events_base.c
index 849500e..524c221 100644
--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -39,6 +39,7 @@
#include <asm/irq.h>
#include <asm/idle.h>
#include <asm/io_apic.h>
+#include <asm/i8259.h>
#include <asm/xen/pci.h>
#endif
#include <asm/sync_bitops.h>
@@ -420,7 +421,7 @@
return xen_allocate_irq_dynamic();
/* Legacy IRQ descriptors are already allocated by the arch. */
- if (gsi < NR_IRQS_LEGACY)
+ if (gsi < nr_legacy_irqs())
irq = gsi;
else
irq = irq_alloc_desc_at(gsi, -1);
@@ -446,7 +447,7 @@
kfree(info);
/* Legacy IRQ descriptors are managed by the arch. */
- if (irq < NR_IRQS_LEGACY)
+ if (irq < nr_legacy_irqs())
return;
irq_free_desc(irq);
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index 00f40f0..38272ad 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -49,6 +49,8 @@
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/cpu.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
#include <xen/xen.h>
#include <xen/events.h>
@@ -58,10 +60,10 @@
struct per_user_data {
struct mutex bind_mutex; /* serialize bind/unbind operations */
struct rb_root evtchns;
+ unsigned int nr_evtchns;
/* Notification ring, accessed via /dev/xen/evtchn. */
-#define EVTCHN_RING_SIZE (PAGE_SIZE / sizeof(evtchn_port_t))
-#define EVTCHN_RING_MASK(_i) ((_i)&(EVTCHN_RING_SIZE-1))
+ unsigned int ring_size;
evtchn_port_t *ring;
unsigned int ring_cons, ring_prod, ring_overflow;
struct mutex ring_cons_mutex; /* protect against concurrent readers */
@@ -80,10 +82,41 @@
bool enabled;
};
+static evtchn_port_t *evtchn_alloc_ring(unsigned int size)
+{
+ evtchn_port_t *ring;
+ size_t s = size * sizeof(*ring);
+
+ ring = kmalloc(s, GFP_KERNEL);
+ if (!ring)
+ ring = vmalloc(s);
+
+ return ring;
+}
+
+static void evtchn_free_ring(evtchn_port_t *ring)
+{
+ kvfree(ring);
+}
+
+static unsigned int evtchn_ring_offset(struct per_user_data *u,
+ unsigned int idx)
+{
+ return idx & (u->ring_size - 1);
+}
+
+static evtchn_port_t *evtchn_ring_entry(struct per_user_data *u,
+ unsigned int idx)
+{
+ return u->ring + evtchn_ring_offset(u, idx);
+}
+
static int add_evtchn(struct per_user_data *u, struct user_evtchn *evtchn)
{
struct rb_node **new = &(u->evtchns.rb_node), *parent = NULL;
+ u->nr_evtchns++;
+
while (*new) {
struct user_evtchn *this;
@@ -107,6 +140,7 @@
static void del_evtchn(struct per_user_data *u, struct user_evtchn *evtchn)
{
+ u->nr_evtchns--;
rb_erase(&evtchn->node, &u->evtchns);
kfree(evtchn);
}
@@ -144,8 +178,8 @@
spin_lock(&u->ring_prod_lock);
- if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) {
- u->ring[EVTCHN_RING_MASK(u->ring_prod)] = evtchn->port;
+ if ((u->ring_prod - u->ring_cons) < u->ring_size) {
+ *evtchn_ring_entry(u, u->ring_prod) = evtchn->port;
wmb(); /* Ensure ring contents visible */
if (u->ring_cons == u->ring_prod++) {
wake_up_interruptible(&u->evtchn_wait);
@@ -200,10 +234,10 @@
}
/* Byte lengths of two chunks. Chunk split (if any) is at ring wrap. */
- if (((c ^ p) & EVTCHN_RING_SIZE) != 0) {
- bytes1 = (EVTCHN_RING_SIZE - EVTCHN_RING_MASK(c)) *
+ if (((c ^ p) & u->ring_size) != 0) {
+ bytes1 = (u->ring_size - evtchn_ring_offset(u, c)) *
sizeof(evtchn_port_t);
- bytes2 = EVTCHN_RING_MASK(p) * sizeof(evtchn_port_t);
+ bytes2 = evtchn_ring_offset(u, p) * sizeof(evtchn_port_t);
} else {
bytes1 = (p - c) * sizeof(evtchn_port_t);
bytes2 = 0;
@@ -219,7 +253,7 @@
rc = -EFAULT;
rmb(); /* Ensure that we see the port before we copy it. */
- if (copy_to_user(buf, &u->ring[EVTCHN_RING_MASK(c)], bytes1) ||
+ if (copy_to_user(buf, evtchn_ring_entry(u, c), bytes1) ||
((bytes2 != 0) &&
copy_to_user(&buf[bytes1], &u->ring[0], bytes2)))
goto unlock_out;
@@ -278,6 +312,66 @@
return rc;
}
+static int evtchn_resize_ring(struct per_user_data *u)
+{
+ unsigned int new_size;
+ evtchn_port_t *new_ring, *old_ring;
+ unsigned int p, c;
+
+ /*
+ * Ensure the ring is large enough to capture all possible
+ * events. i.e., one free slot for each bound event.
+ */
+ if (u->nr_evtchns <= u->ring_size)
+ return 0;
+
+ if (u->ring_size == 0)
+ new_size = 64;
+ else
+ new_size = 2 * u->ring_size;
+
+ new_ring = evtchn_alloc_ring(new_size);
+ if (!new_ring)
+ return -ENOMEM;
+
+ old_ring = u->ring;
+
+ /*
+ * Access to the ring contents is serialized by either the
+ * prod /or/ cons lock so take both when resizing.
+ */
+ mutex_lock(&u->ring_cons_mutex);
+ spin_lock_irq(&u->ring_prod_lock);
+
+ /*
+ * Copy the old ring contents to the new ring.
+ *
+ * If the ring contents crosses the end of the current ring,
+ * it needs to be copied in two chunks.
+ *
+ * +---------+ +------------------+
+ * |34567 12| -> | 1234567 |
+ * +-----p-c-+ +------------------+
+ */
+ p = evtchn_ring_offset(u, u->ring_prod);
+ c = evtchn_ring_offset(u, u->ring_cons);
+ if (p < c) {
+ memcpy(new_ring + c, u->ring + c, (u->ring_size - c) * sizeof(*u->ring));
+ memcpy(new_ring + u->ring_size, u->ring, p * sizeof(*u->ring));
+ } else
+ memcpy(new_ring + c, u->ring + c, (p - c) * sizeof(*u->ring));
+
+ u->ring = new_ring;
+ u->ring_size = new_size;
+
+ spin_unlock_irq(&u->ring_prod_lock);
+ mutex_unlock(&u->ring_cons_mutex);
+
+ evtchn_free_ring(old_ring);
+
+ return 0;
+}
+
static int evtchn_bind_to_user(struct per_user_data *u, int port)
{
struct user_evtchn *evtchn;
@@ -305,6 +399,10 @@
if (rc < 0)
goto err;
+ rc = evtchn_resize_ring(u);
+ if (rc < 0)
+ goto err;
+
rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, 0,
u->name, evtchn);
if (rc < 0)
@@ -503,13 +601,6 @@
init_waitqueue_head(&u->evtchn_wait);
- u->ring = (evtchn_port_t *)__get_free_page(GFP_KERNEL);
- if (u->ring == NULL) {
- kfree(u->name);
- kfree(u);
- return -ENOMEM;
- }
-
mutex_init(&u->bind_mutex);
mutex_init(&u->ring_cons_mutex);
spin_lock_init(&u->ring_prod_lock);
@@ -532,7 +623,7 @@
evtchn_unbind_from_user(u, evtchn);
}
- free_page((unsigned long)u->ring);
+ evtchn_free_ring(u->ring);
kfree(u->name);
kfree(u);
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 2ea0b3b..1be5dd0 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -804,7 +804,7 @@
vma->vm_ops = &gntdev_vmops;
- vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
+ vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP | VM_IO;
if (use_ptemod)
vma->vm_flags |= VM_DONTCOPY;
diff --git a/fs/Kconfig b/fs/Kconfig
index da3f32f..6ce72d8 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -46,6 +46,12 @@
or if unsure, say N. Saying Y will increase the size of the kernel
by about 5kB.
+config FS_DAX_PMD
+ bool
+ default FS_DAX
+ depends on FS_DAX
+ depends on BROKEN
+
endif # BLOCK
# Posix ACL utility routines
diff --git a/fs/block_dev.c b/fs/block_dev.c
index bb0dfb1..c25639e 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -390,9 +390,17 @@
struct page *page)
{
const struct block_device_operations *ops = bdev->bd_disk->fops;
+ int result = -EOPNOTSUPP;
+
if (!ops->rw_page || bdev_get_integrity(bdev))
- return -EOPNOTSUPP;
- return ops->rw_page(bdev, sector + get_start_sect(bdev), page, READ);
+ return result;
+
+ result = blk_queue_enter(bdev->bd_queue, GFP_KERNEL);
+ if (result)
+ return result;
+ result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, READ);
+ blk_queue_exit(bdev->bd_queue);
+ return result;
}
EXPORT_SYMBOL_GPL(bdev_read_page);
@@ -421,14 +429,20 @@
int result;
int rw = (wbc->sync_mode == WB_SYNC_ALL) ? WRITE_SYNC : WRITE;
const struct block_device_operations *ops = bdev->bd_disk->fops;
+
if (!ops->rw_page || bdev_get_integrity(bdev))
return -EOPNOTSUPP;
+ result = blk_queue_enter(bdev->bd_queue, GFP_KERNEL);
+ if (result)
+ return result;
+
set_page_writeback(page);
result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, rw);
if (result)
end_page_writeback(page);
else
unlock_page(page);
+ blk_queue_exit(bdev->bd_queue);
return result;
}
EXPORT_SYMBOL_GPL(bdev_write_page);
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 6dcdb2e..d453d62 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -355,7 +355,7 @@
index = srcu_read_lock(&fs_info->subvol_srcu);
- root = btrfs_read_fs_root_no_name(fs_info, &root_key);
+ root = btrfs_get_fs_root(fs_info, &root_key, false);
if (IS_ERR(root)) {
srcu_read_unlock(&fs_info->subvol_srcu, index);
ret = PTR_ERR(root);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 8c58191..35489e7 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3416,6 +3416,7 @@
struct btrfs_block_group_cache *btrfs_lookup_block_group(
struct btrfs_fs_info *info,
u64 bytenr);
+void btrfs_get_block_group(struct btrfs_block_group_cache *cache);
void btrfs_put_block_group(struct btrfs_block_group_cache *cache);
int get_block_group_index(struct btrfs_block_group_cache *cache);
struct extent_buffer *btrfs_alloc_tree_block(struct btrfs_trans_handle *trans,
@@ -3479,6 +3480,9 @@
struct btrfs_root *root, u64 bytes_used,
u64 type, u64 chunk_objectid, u64 chunk_offset,
u64 size);
+struct btrfs_trans_handle *btrfs_start_trans_remove_block_group(
+ struct btrfs_fs_info *fs_info,
+ const u64 chunk_offset);
int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 group_start,
struct extent_map *em);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index acf3ed1..4b89680a 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -124,7 +124,7 @@
return (cache->flags & bits) == bits;
}
-static void btrfs_get_block_group(struct btrfs_block_group_cache *cache)
+void btrfs_get_block_group(struct btrfs_block_group_cache *cache)
{
atomic_inc(&cache->count);
}
@@ -5915,19 +5915,6 @@
set_extent_dirty(info->pinned_extents,
bytenr, bytenr + num_bytes - 1,
GFP_NOFS | __GFP_NOFAIL);
- /*
- * No longer have used bytes in this block group, queue
- * it for deletion.
- */
- if (old_val == 0) {
- spin_lock(&info->unused_bgs_lock);
- if (list_empty(&cache->bg_list)) {
- btrfs_get_block_group(cache);
- list_add_tail(&cache->bg_list,
- &info->unused_bgs);
- }
- spin_unlock(&info->unused_bgs_lock);
- }
}
spin_lock(&trans->transaction->dirty_bgs_lock);
@@ -5939,6 +5926,22 @@
}
spin_unlock(&trans->transaction->dirty_bgs_lock);
+ /*
+ * No longer have used bytes in this block group, queue it for
+ * deletion. We do this after adding the block group to the
+ * dirty list to avoid races between cleaner kthread and space
+ * cache writeout.
+ */
+ if (!alloc && old_val == 0) {
+ spin_lock(&info->unused_bgs_lock);
+ if (list_empty(&cache->bg_list)) {
+ btrfs_get_block_group(cache);
+ list_add_tail(&cache->bg_list,
+ &info->unused_bgs);
+ }
+ spin_unlock(&info->unused_bgs_lock);
+ }
+
btrfs_put_block_group(cache);
total -= num_bytes;
bytenr += num_bytes;
@@ -8105,21 +8108,47 @@
}
/*
- * TODO: Modify related function to add related node/leaf to dirty_extent_root,
- * for later qgroup accounting.
- *
- * Current, this function does nothing.
+ * These may not be seen by the usual inc/dec ref code so we have to
+ * add them here.
*/
+static int record_one_subtree_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, u64 bytenr,
+ u64 num_bytes)
+{
+ struct btrfs_qgroup_extent_record *qrecord;
+ struct btrfs_delayed_ref_root *delayed_refs;
+
+ qrecord = kmalloc(sizeof(*qrecord), GFP_NOFS);
+ if (!qrecord)
+ return -ENOMEM;
+
+ qrecord->bytenr = bytenr;
+ qrecord->num_bytes = num_bytes;
+ qrecord->old_roots = NULL;
+
+ delayed_refs = &trans->transaction->delayed_refs;
+ spin_lock(&delayed_refs->lock);
+ if (btrfs_qgroup_insert_dirty_extent(delayed_refs, qrecord))
+ kfree(qrecord);
+ spin_unlock(&delayed_refs->lock);
+
+ return 0;
+}
+
static int account_leaf_items(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *eb)
{
int nr = btrfs_header_nritems(eb);
- int i, extent_type;
+ int i, extent_type, ret;
struct btrfs_key key;
struct btrfs_file_extent_item *fi;
u64 bytenr, num_bytes;
+ /* We can be called directly from walk_up_proc() */
+ if (!root->fs_info->quota_enabled)
+ return 0;
+
for (i = 0; i < nr; i++) {
btrfs_item_key_to_cpu(eb, &key, i);
@@ -8138,6 +8167,10 @@
continue;
num_bytes = btrfs_file_extent_disk_num_bytes(eb, fi);
+
+ ret = record_one_subtree_extent(trans, root, bytenr, num_bytes);
+ if (ret)
+ return ret;
}
return 0;
}
@@ -8206,8 +8239,6 @@
/*
* root_eb is the subtree root and is locked before this function is called.
- * TODO: Modify this function to mark all (including complete shared node)
- * to dirty_extent_root to allow it get accounted in qgroup.
*/
static int account_shared_subtree(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
@@ -8285,6 +8316,11 @@
btrfs_tree_read_lock(eb);
btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
path->locks[level] = BTRFS_READ_LOCK_BLOCKING;
+
+ ret = record_one_subtree_extent(trans, root, child_bytenr,
+ root->nodesize);
+ if (ret)
+ goto out;
}
if (level == 0) {
@@ -10256,6 +10292,47 @@
return ret;
}
+struct btrfs_trans_handle *
+btrfs_start_trans_remove_block_group(struct btrfs_fs_info *fs_info,
+ const u64 chunk_offset)
+{
+ struct extent_map_tree *em_tree = &fs_info->mapping_tree.map_tree;
+ struct extent_map *em;
+ struct map_lookup *map;
+ unsigned int num_items;
+
+ read_lock(&em_tree->lock);
+ em = lookup_extent_mapping(em_tree, chunk_offset, 1);
+ read_unlock(&em_tree->lock);
+ ASSERT(em && em->start == chunk_offset);
+
+ /*
+ * We need to reserve 3 + N units from the metadata space info in order
+ * to remove a block group (done at btrfs_remove_chunk() and at
+ * btrfs_remove_block_group()), which are used for:
+ *
+ * 1 unit for adding the free space inode's orphan (located in the tree
+ * of tree roots).
+ * 1 unit for deleting the block group item (located in the extent
+ * tree).
+ * 1 unit for deleting the free space item (located in tree of tree
+ * roots).
+ * N units for deleting N device extent items corresponding to each
+ * stripe (located in the device tree).
+ *
+ * In order to remove a block group we also need to reserve units in the
+ * system space info in order to update the chunk tree (update one or
+ * more device items and remove one chunk item), but this is done at
+ * btrfs_remove_chunk() through a call to check_system_chunk().
+ */
+ map = (struct map_lookup *)em->bdev;
+ num_items = 3 + map->num_stripes;
+ free_extent_map(em);
+
+ return btrfs_start_transaction_fallback_global_rsv(fs_info->extent_root,
+ num_items, 1);
+}
+
/*
* Process the unused_bgs list and remove any that don't have any allocated
* space inside of them.
@@ -10322,8 +10399,8 @@
* Want to do this before we do anything else so we can recover
* properly if we fail to join the transaction.
*/
- /* 1 for btrfs_orphan_reserve_metadata() */
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_trans_remove_block_group(fs_info,
+ block_group->key.objectid);
if (IS_ERR(trans)) {
btrfs_dec_block_group_ro(root, block_group);
ret = PTR_ERR(trans);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 977e715..72e7346 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1882,8 +1882,13 @@
struct btrfs_log_ctx ctx;
int ret = 0;
bool full_sync = 0;
- const u64 len = end - start + 1;
+ u64 len;
+ /*
+ * The range length can be represented by u64, we have to do the typecasts
+ * to avoid signed overflow if it's [0, LLONG_MAX] eg. from fsync()
+ */
+ len = (u64)end - (u64)start + 1;
trace_btrfs_sync_file(file, datasync);
/*
@@ -2071,8 +2076,7 @@
}
}
if (!full_sync) {
- ret = btrfs_wait_ordered_range(inode, start,
- end - start + 1);
+ ret = btrfs_wait_ordered_range(inode, start, len);
if (ret) {
btrfs_end_transaction(trans, root);
goto out;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 994490d..a70c579 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4046,9 +4046,7 @@
*/
static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir)
{
- struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(dir)->root;
- int ret;
/*
* 1 for the possible orphan item
@@ -4057,27 +4055,7 @@
* 1 for the inode ref
* 1 for the inode
*/
- trans = btrfs_start_transaction(root, 5);
- if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
- return trans;
-
- if (PTR_ERR(trans) == -ENOSPC) {
- u64 num_bytes = btrfs_calc_trans_metadata_size(root, 5);
-
- trans = btrfs_start_transaction(root, 0);
- if (IS_ERR(trans))
- return trans;
- ret = btrfs_cond_migrate_bytes(root->fs_info,
- &root->fs_info->trans_block_rsv,
- num_bytes, 5);
- if (ret) {
- btrfs_end_transaction(trans, root);
- return ERR_PTR(ret);
- }
- trans->block_rsv = &root->fs_info->trans_block_rsv;
- trans->bytes_reserved = num_bytes;
- }
- return trans;
+ return btrfs_start_transaction_fallback_global_rsv(root, 5, 5);
}
static int btrfs_unlink(struct inode *dir, struct dentry *dentry)
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 93e12c1..5279fda 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -993,9 +993,10 @@
mutex_lock(&fs_info->qgroup_ioctl_lock);
if (!fs_info->quota_root)
goto out;
- spin_lock(&fs_info->qgroup_lock);
fs_info->quota_enabled = 0;
fs_info->pending_quota_state = 0;
+ btrfs_qgroup_wait_for_completion(fs_info);
+ spin_lock(&fs_info->qgroup_lock);
quota_root = fs_info->quota_root;
fs_info->quota_root = NULL;
fs_info->qgroup_flags &= ~BTRFS_QGROUP_STATUS_FLAG_ON;
@@ -1461,6 +1462,8 @@
struct btrfs_qgroup_extent_record *entry;
u64 bytenr = record->bytenr;
+ assert_spin_locked(&delayed_refs->lock);
+
while (*p) {
parent_node = *p;
entry = rb_entry(parent_node, struct btrfs_qgroup_extent_record,
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index 2907a77..b091d94 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -3432,7 +3432,9 @@
static noinline_for_stack int scrub_chunk(struct scrub_ctx *sctx,
struct btrfs_device *scrub_dev,
u64 chunk_offset, u64 length,
- u64 dev_offset, int is_dev_replace)
+ u64 dev_offset,
+ struct btrfs_block_group_cache *cache,
+ int is_dev_replace)
{
struct btrfs_mapping_tree *map_tree =
&sctx->dev_root->fs_info->mapping_tree;
@@ -3445,8 +3447,18 @@
em = lookup_extent_mapping(&map_tree->map_tree, chunk_offset, 1);
read_unlock(&map_tree->map_tree.lock);
- if (!em)
- return -EINVAL;
+ if (!em) {
+ /*
+ * Might have been an unused block group deleted by the cleaner
+ * kthread or relocation.
+ */
+ spin_lock(&cache->lock);
+ if (!cache->removed)
+ ret = -EINVAL;
+ spin_unlock(&cache->lock);
+
+ return ret;
+ }
map = (struct map_lookup *)em->bdev;
if (em->start != chunk_offset)
@@ -3483,6 +3495,7 @@
u64 length;
u64 chunk_offset;
int ret = 0;
+ int ro_set;
int slot;
struct extent_buffer *l;
struct btrfs_key key;
@@ -3568,7 +3581,21 @@
scrub_pause_on(fs_info);
ret = btrfs_inc_block_group_ro(root, cache);
scrub_pause_off(fs_info);
- if (ret) {
+
+ if (ret == 0) {
+ ro_set = 1;
+ } else if (ret == -ENOSPC) {
+ /*
+ * btrfs_inc_block_group_ro return -ENOSPC when it
+ * failed in creating new chunk for metadata.
+ * It is not a problem for scrub/replace, because
+ * metadata are always cowed, and our scrub paused
+ * commit_transactions.
+ */
+ ro_set = 0;
+ } else {
+ btrfs_warn(fs_info, "failed setting block group ro, ret=%d\n",
+ ret);
btrfs_put_block_group(cache);
break;
}
@@ -3577,7 +3604,7 @@
dev_replace->cursor_left = found_key.offset;
dev_replace->item_needs_writeback = 1;
ret = scrub_chunk(sctx, scrub_dev, chunk_offset, length,
- found_key.offset, is_dev_replace);
+ found_key.offset, cache, is_dev_replace);
/*
* flush, submit all pending read and write bios, afterwards
@@ -3611,7 +3638,30 @@
scrub_pause_off(fs_info);
- btrfs_dec_block_group_ro(root, cache);
+ if (ro_set)
+ btrfs_dec_block_group_ro(root, cache);
+
+ /*
+ * We might have prevented the cleaner kthread from deleting
+ * this block group if it was already unused because we raced
+ * and set it to RO mode first. So add it back to the unused
+ * list, otherwise it might not ever be deleted unless a manual
+ * balance is triggered or it becomes used and unused again.
+ */
+ spin_lock(&cache->lock);
+ if (!cache->removed && !cache->ro && cache->reserved == 0 &&
+ btrfs_block_group_used(&cache->item) == 0) {
+ spin_unlock(&cache->lock);
+ spin_lock(&fs_info->unused_bgs_lock);
+ if (list_empty(&cache->bg_list)) {
+ btrfs_get_block_group(cache);
+ list_add_tail(&cache->bg_list,
+ &fs_info->unused_bgs);
+ }
+ spin_unlock(&fs_info->unused_bgs_lock);
+ } else {
+ spin_unlock(&cache->lock);
+ }
btrfs_put_block_group(cache);
if (ret)
diff --git a/fs/btrfs/tests/free-space-tests.c b/fs/btrfs/tests/free-space-tests.c
index c8c3d70..8b72b00 100644
--- a/fs/btrfs/tests/free-space-tests.c
+++ b/fs/btrfs/tests/free-space-tests.c
@@ -898,8 +898,10 @@
}
root = btrfs_alloc_dummy_root();
- if (!root)
+ if (IS_ERR(root)) {
+ ret = PTR_ERR(root);
goto out;
+ }
root->fs_info = btrfs_alloc_dummy_fs_info();
if (!root->fs_info)
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 418c6a2..3367a3c 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -592,6 +592,38 @@
return start_transaction(root, num_items, TRANS_START,
BTRFS_RESERVE_FLUSH_ALL);
}
+struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
+ struct btrfs_root *root,
+ unsigned int num_items,
+ int min_factor)
+{
+ struct btrfs_trans_handle *trans;
+ u64 num_bytes;
+ int ret;
+
+ trans = btrfs_start_transaction(root, num_items);
+ if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC)
+ return trans;
+
+ trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans))
+ return trans;
+
+ num_bytes = btrfs_calc_trans_metadata_size(root, num_items);
+ ret = btrfs_cond_migrate_bytes(root->fs_info,
+ &root->fs_info->trans_block_rsv,
+ num_bytes,
+ min_factor);
+ if (ret) {
+ btrfs_end_transaction(trans, root);
+ return ERR_PTR(ret);
+ }
+
+ trans->block_rsv = &root->fs_info->trans_block_rsv;
+ trans->bytes_reserved = num_bytes;
+
+ return trans;
+}
struct btrfs_trans_handle *btrfs_start_transaction_lflush(
struct btrfs_root *root,
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index b05b2f6..0da21ca 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -185,6 +185,10 @@
struct btrfs_root *root);
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
unsigned int num_items);
+struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
+ struct btrfs_root *root,
+ unsigned int num_items,
+ int min_factor);
struct btrfs_trans_handle *btrfs_start_transaction_lflush(
struct btrfs_root *root,
unsigned int num_items);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index a6df8fd..4564522 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1973,8 +1973,7 @@
if (srcdev->writeable) {
fs_devices->rw_devices--;
/* zero out the old super if it is writable */
- btrfs_scratch_superblocks(srcdev->bdev,
- rcu_str_deref(srcdev->name));
+ btrfs_scratch_superblocks(srcdev->bdev, srcdev->name->str);
}
if (srcdev->bdev)
@@ -2024,8 +2023,7 @@
btrfs_sysfs_rm_device_link(fs_info->fs_devices, tgtdev);
if (tgtdev->bdev) {
- btrfs_scratch_superblocks(tgtdev->bdev,
- rcu_str_deref(tgtdev->name));
+ btrfs_scratch_superblocks(tgtdev->bdev, tgtdev->name->str);
fs_info->fs_devices->open_devices--;
}
fs_info->fs_devices->num_devices--;
@@ -2853,7 +2851,8 @@
if (ret)
return ret;
- trans = btrfs_start_transaction(root, 0);
+ trans = btrfs_start_trans_remove_block_group(root->fs_info,
+ chunk_offset);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
btrfs_std_error(root->fs_info, ret, NULL);
@@ -3123,7 +3122,7 @@
return 1;
}
-static int chunk_usage_filter(struct btrfs_fs_info *fs_info, u64 chunk_offset,
+static int chunk_usage_range_filter(struct btrfs_fs_info *fs_info, u64 chunk_offset,
struct btrfs_balance_args *bargs)
{
struct btrfs_block_group_cache *cache;
@@ -3156,7 +3155,7 @@
return ret;
}
-static int chunk_usage_range_filter(struct btrfs_fs_info *fs_info,
+static int chunk_usage_filter(struct btrfs_fs_info *fs_info,
u64 chunk_offset, struct btrfs_balance_args *bargs)
{
struct btrfs_block_group_cache *cache;
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index ec57123..d5c84f6 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -382,7 +382,7 @@
#define BTRFS_BALANCE_ARGS_LIMIT (1ULL << 5)
#define BTRFS_BALANCE_ARGS_LIMIT_RANGE (1ULL << 6)
#define BTRFS_BALANCE_ARGS_STRIPES_RANGE (1ULL << 7)
-#define BTRFS_BALANCE_ARGS_USAGE_RANGE (1ULL << 8)
+#define BTRFS_BALANCE_ARGS_USAGE_RANGE (1ULL << 10)
#define BTRFS_BALANCE_ARGS_MASK \
(BTRFS_BALANCE_ARGS_PROFILES | \
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 7a6b02f..c0f3da3 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -879,7 +879,7 @@
loff_t pos, eof;
size_t len;
void *data;
- int ret;
+ int ret = -ENOBUFS;
ASSERT(op != NULL);
ASSERT(page != NULL);
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index c81ce7f..a7a1b21 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1636,6 +1636,116 @@
.iterate = configfs_readdir,
};
+/**
+ * configfs_register_group - creates a parent-child relation between two groups
+ * @parent_group: parent group
+ * @group: child group
+ *
+ * link groups, creates dentry for the child and attaches it to the
+ * parent dentry.
+ *
+ * Return: 0 on success, negative errno code on error
+ */
+int configfs_register_group(struct config_group *parent_group,
+ struct config_group *group)
+{
+ struct configfs_subsystem *subsys = parent_group->cg_subsys;
+ struct dentry *parent;
+ int ret;
+
+ mutex_lock(&subsys->su_mutex);
+ link_group(parent_group, group);
+ mutex_unlock(&subsys->su_mutex);
+
+ parent = parent_group->cg_item.ci_dentry;
+
+ mutex_lock_nested(&d_inode(parent)->i_mutex, I_MUTEX_PARENT);
+ ret = create_default_group(parent_group, group);
+ if (!ret) {
+ spin_lock(&configfs_dirent_lock);
+ configfs_dir_set_ready(group->cg_item.ci_dentry->d_fsdata);
+ spin_unlock(&configfs_dirent_lock);
+ }
+ mutex_unlock(&d_inode(parent)->i_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(configfs_register_group);
+
+/**
+ * configfs_unregister_group() - unregisters a child group from its parent
+ * @group: parent group to be unregistered
+ *
+ * Undoes configfs_register_group()
+ */
+void configfs_unregister_group(struct config_group *group)
+{
+ struct configfs_subsystem *subsys = group->cg_subsys;
+ struct dentry *dentry = group->cg_item.ci_dentry;
+ struct dentry *parent = group->cg_item.ci_parent->ci_dentry;
+
+ mutex_lock_nested(&d_inode(parent)->i_mutex, I_MUTEX_PARENT);
+ spin_lock(&configfs_dirent_lock);
+ configfs_detach_prep(dentry, NULL);
+ spin_unlock(&configfs_dirent_lock);
+
+ configfs_detach_group(&group->cg_item);
+ d_inode(dentry)->i_flags |= S_DEAD;
+ dont_mount(dentry);
+ d_delete(dentry);
+ mutex_unlock(&d_inode(parent)->i_mutex);
+
+ dput(dentry);
+
+ mutex_lock(&subsys->su_mutex);
+ unlink_group(group);
+ mutex_unlock(&subsys->su_mutex);
+}
+EXPORT_SYMBOL(configfs_unregister_group);
+
+/**
+ * configfs_register_default_group() - allocates and registers a child group
+ * @parent_group: parent group
+ * @name: child group name
+ * @item_type: child item type description
+ *
+ * boilerplate to allocate and register a child group with its parent. We need
+ * kzalloc'ed memory because child's default_group is initially empty.
+ *
+ * Return: allocated config group or ERR_PTR() on error
+ */
+struct config_group *
+configfs_register_default_group(struct config_group *parent_group,
+ const char *name,
+ struct config_item_type *item_type)
+{
+ int ret;
+ struct config_group *group;
+
+ group = kzalloc(sizeof(*group), GFP_KERNEL);
+ if (!group)
+ return ERR_PTR(-ENOMEM);
+ config_group_init_type_name(group, name, item_type);
+
+ ret = configfs_register_group(parent_group, group);
+ if (ret) {
+ kfree(group);
+ return ERR_PTR(ret);
+ }
+ return group;
+}
+EXPORT_SYMBOL(configfs_register_default_group);
+
+/**
+ * configfs_unregister_default_group() - unregisters and frees a child group
+ * @group: the group to act on
+ */
+void configfs_unregister_default_group(struct config_group *group)
+{
+ configfs_unregister_group(group);
+ kfree(group);
+}
+EXPORT_SYMBOL(configfs_unregister_default_group);
+
int configfs_register_subsystem(struct configfs_subsystem *subsys)
{
int err;
diff --git a/fs/dax.c b/fs/dax.c
index d1e5cb7..43671b6 100644
--- a/fs/dax.c
+++ b/fs/dax.c
@@ -541,6 +541,10 @@
unsigned long pfn;
int result = 0;
+ /* dax pmd mappings are broken wrt gup and fork */
+ if (!IS_ENABLED(CONFIG_FS_DAX_PMD))
+ return VM_FAULT_FALLBACK;
+
/* Fall back to PTEs if we're going to COW */
if (write && !(vma->vm_flags & VM_SHARED))
return VM_FAULT_FALLBACK;
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 3a71cea..748d35a 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -569,6 +569,8 @@
/* Fall through */
case Opt_dax:
#ifdef CONFIG_FS_DAX
+ ext2_msg(sb, KERN_WARNING,
+ "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
set_opt(sbi->s_mount_opt, DAX);
#else
ext2_msg(sb, KERN_INFO, "dax option not supported");
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 753f4e6..c9ab67d 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1664,8 +1664,12 @@
}
sbi->s_jquota_fmt = m->mount_opt;
#endif
-#ifndef CONFIG_FS_DAX
} else if (token == Opt_dax) {
+#ifdef CONFIG_FS_DAX
+ ext4_msg(sb, KERN_WARNING,
+ "DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
+ sbi->s_mount_opt |= m->mount_opt;
+#else
ext4_msg(sb, KERN_INFO, "dax option not supported");
return -1;
#endif
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 4afc4d9..8b2127f 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -610,9 +610,9 @@
int status = fat_parse_long(inode, &cpos, &bh, &de,
&unicode, &nr_slots);
if (status < 0) {
- ctx->pos = cpos;
+ bh = NULL;
ret = status;
- goto out;
+ goto end_of_dir;
} else if (status == PARSE_INVALID)
goto record_end;
else if (status == PARSE_NOT_LONGNAME)
@@ -654,8 +654,9 @@
fill_len = short_len;
start_filldir:
- if (!fake_offset)
- ctx->pos = cpos - (nr_slots + 1) * sizeof(struct msdos_dir_entry);
+ ctx->pos = cpos - (nr_slots + 1) * sizeof(struct msdos_dir_entry);
+ if (fake_offset && ctx->pos < 2)
+ ctx->pos = 2;
if (!memcmp(de->name, MSDOS_DOT, MSDOS_NAME)) {
if (!dir_emit_dot(file, ctx))
@@ -681,14 +682,19 @@
fake_offset = 0;
ctx->pos = cpos;
goto get_new;
+
end_of_dir:
- ctx->pos = cpos;
+ if (fake_offset && cpos < 2)
+ ctx->pos = 2;
+ else
+ ctx->pos = cpos;
fill_failed:
brelse(bh);
if (unicode)
__putname(unicode);
out:
mutex_unlock(&sbi->s_lock);
+
return ret;
}
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 316adb9..de4bdfa 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -332,12 +332,17 @@
* truncation is indicated by end of range being LLONG_MAX
* In this case, we first scan the range and release found pages.
* After releasing pages, hugetlb_unreserve_pages cleans up region/reserv
- * maps and global counts.
+ * maps and global counts. Page faults can not race with truncation
+ * in this routine. hugetlb_no_page() prevents page faults in the
+ * truncated range. It checks i_size before allocation, and again after
+ * with the page table lock for the page held. The same lock must be
+ * acquired to unmap a page.
* hole punch is indicated if end is not LLONG_MAX
* In the hole punch case we scan the range and release found pages.
* Only when releasing a page is the associated region/reserv map
* deleted. The region/reserv map for ranges without associated
- * pages are not modified.
+ * pages are not modified. Page faults can race with hole punch.
+ * This is indicated if we find a mapped page.
* Note: If the passed end of range value is beyond the end of file, but
* not LLONG_MAX this routine still performs a hole punch operation.
*/
@@ -361,46 +366,37 @@
next = start;
while (next < end) {
/*
- * Make sure to never grab more pages that we
- * might possibly need.
+ * Don't grab more pages than the number left in the range.
*/
if (end - next < lookup_nr)
lookup_nr = end - next;
/*
- * This pagevec_lookup() may return pages past 'end',
- * so we must check for page->index > end.
+ * When no more pages are found, we are done.
*/
- if (!pagevec_lookup(&pvec, mapping, next, lookup_nr)) {
- if (next == start)
- break;
- next = start;
- continue;
- }
+ if (!pagevec_lookup(&pvec, mapping, next, lookup_nr))
+ break;
for (i = 0; i < pagevec_count(&pvec); ++i) {
struct page *page = pvec.pages[i];
u32 hash;
+ /*
+ * The page (index) could be beyond end. This is
+ * only possible in the punch hole case as end is
+ * max page offset in the truncate case.
+ */
+ next = page->index;
+ if (next >= end)
+ break;
+
hash = hugetlb_fault_mutex_hash(h, current->mm,
&pseudo_vma,
mapping, next, 0);
mutex_lock(&hugetlb_fault_mutex_table[hash]);
lock_page(page);
- if (page->index >= end) {
- unlock_page(page);
- mutex_unlock(&hugetlb_fault_mutex_table[hash]);
- next = end; /* we are done */
- break;
- }
-
- /*
- * If page is mapped, it was faulted in after being
- * unmapped. Do nothing in this race case. In the
- * normal case page is not mapped.
- */
- if (!page_mapped(page)) {
+ if (likely(!page_mapped(page))) {
bool rsv_on_error = !PagePrivate(page);
/*
* We must free the huge page and remove
@@ -421,17 +417,23 @@
hugetlb_fix_reserve_counts(
inode, rsv_on_error);
}
+ } else {
+ /*
+ * If page is mapped, it was faulted in after
+ * being unmapped. It indicates a race between
+ * hole punch and page fault. Do nothing in
+ * this case. Getting here in a truncate
+ * operation is a bug.
+ */
+ BUG_ON(truncate_op);
}
- if (page->index > next)
- next = page->index;
-
- ++next;
unlock_page(page);
-
mutex_unlock(&hugetlb_fault_mutex_table[hash]);
}
+ ++next;
huge_pagevec_release(&pvec);
+ cond_resched();
}
if (truncate_op)
@@ -647,9 +649,6 @@
if (!(mode & FALLOC_FL_KEEP_SIZE) && offset + len > inode->i_size)
i_size_write(inode, offset + len);
inode->i_ctime = CURRENT_TIME;
- spin_lock(&inode->i_lock);
- inode->i_private = NULL;
- spin_unlock(&inode->i_lock);
out:
mutex_unlock(&inode->i_mutex);
return error;
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index 79b1130..0a3f9b5 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -525,6 +525,8 @@
switch (rqdata.cmd) {
case NCP_LOCK_EX:
case NCP_LOCK_SH:
+ if (rqdata.timeout < 0)
+ return -EINVAL;
if (rqdata.timeout == 0)
rqdata.timeout = NCP_LOCK_DEFAULT_TIMEOUT;
else if (rqdata.timeout > NCP_LOCK_MAX_TIMEOUT)
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 646cdac..beac58b 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -78,7 +78,8 @@
p = xdr_inline_decode(xdr, nbytes);
if (unlikely(p == NULL))
- printk(KERN_WARNING "NFS: NFSv4 callback reply buffer overflowed!\n");
+ printk(KERN_WARNING "NFS: NFSv4 callback reply buffer overflowed "
+ "or truncated request.\n");
return p;
}
@@ -889,6 +890,7 @@
struct cb_compound_hdr_arg hdr_arg = { 0 };
struct cb_compound_hdr_res hdr_res = { NULL };
struct xdr_stream xdr_in, xdr_out;
+ struct xdr_buf *rq_arg = &rqstp->rq_arg;
__be32 *p, status;
struct cb_process_state cps = {
.drc_status = 0,
@@ -900,7 +902,8 @@
dprintk("%s: start\n", __func__);
- xdr_init_decode(&xdr_in, &rqstp->rq_arg, rqstp->rq_arg.head[0].iov_base);
+ rq_arg->len = rq_arg->head[0].iov_len + rq_arg->page_len;
+ xdr_init_decode(&xdr_in, rq_arg, rq_arg->head[0].iov_base);
p = (__be32*)((char *)rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len);
xdr_init_encode(&xdr_out, &rqstp->rq_res, p);
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 326d9e1..31b0a52 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -618,7 +618,10 @@
nfs_inc_stats(inode, NFSIOS_SETATTRTRUNC);
nfs_vmtruncate(inode, attr->ia_size);
}
- nfs_update_inode(inode, fattr);
+ if (fattr->valid)
+ nfs_update_inode(inode, fattr);
+ else
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR;
spin_unlock(&inode->i_lock);
}
EXPORT_SYMBOL_GPL(nfs_setattr_update_inode);
@@ -1824,7 +1827,11 @@
if ((long)fattr->gencount - (long)nfsi->attr_gencount > 0)
nfsi->attr_gencount = fattr->gencount;
}
- invalid &= ~NFS_INO_INVALID_ATTR;
+
+ /* Don't declare attrcache up to date if there were no attrs! */
+ if (fattr->valid != 0)
+ invalid &= ~NFS_INO_INVALID_ATTR;
+
/* Don't invalidate the data if we were to blame */
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode)
|| S_ISLNK(inode->i_mode)))
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 3e92a3c..6b1ce98 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -14,7 +14,7 @@
#include "pnfs.h"
#include "internal.h"
-#define NFSDBG_FACILITY NFSDBG_PNFS
+#define NFSDBG_FACILITY NFSDBG_PROC
static int nfs42_set_rw_stateid(nfs4_stateid *dst, struct file *file,
fmode_t fmode)
@@ -284,6 +284,7 @@
.dst_fh = NFS_FH(dst_inode),
.src_offset = src_offset,
.dst_offset = dst_offset,
+ .count = count,
.dst_bitmask = server->cache_consistency_bitmask,
};
struct nfs42_clone_res res = {
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 223bedd..10410e8 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -33,7 +33,7 @@
return ret;
idr_preload(GFP_KERNEL);
spin_lock(&nn->nfs_client_lock);
- ret = idr_alloc(&nn->cb_ident_idr, clp, 0, 0, GFP_NOWAIT);
+ ret = idr_alloc(&nn->cb_ident_idr, clp, 1, 0, GFP_NOWAIT);
if (ret >= 0)
clp->cl_cb_ident = ret;
spin_unlock(&nn->nfs_client_lock);
diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index 4aa5719..db9b5fe 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -7,6 +7,7 @@
#include <linux/file.h>
#include <linux/falloc.h>
#include <linux/nfs_fs.h>
+#include <uapi/linux/btrfs.h> /* BTRFS_IOC_CLONE/BTRFS_IOC_CLONE_RANGE */
#include "delegation.h"
#include "internal.h"
#include "iostat.h"
@@ -203,6 +204,7 @@
struct fd src_file;
struct inode *src_inode;
unsigned int bs = server->clone_blksize;
+ bool same_inode = false;
int ret;
/* dst file must be opened for writing */
@@ -221,10 +223,8 @@
src_inode = file_inode(src_file.file);
- /* src and dst must be different files */
- ret = -EINVAL;
if (src_inode == dst_inode)
- goto out_fput;
+ same_inode = true;
/* src file must be opened for reading */
if (!(src_file.file->f_mode & FMODE_READ))
@@ -249,8 +249,16 @@
goto out_fput;
}
+ /* verify if ranges are overlapped within the same file */
+ if (same_inode) {
+ if (dst_off + count > src_off && dst_off < src_off + count)
+ goto out_fput;
+ }
+
/* XXX: do we lock at all? what if server needs CB_RECALL_LAYOUT? */
- if (dst_inode < src_inode) {
+ if (same_inode) {
+ mutex_lock(&src_inode->i_mutex);
+ } else if (dst_inode < src_inode) {
mutex_lock_nested(&dst_inode->i_mutex, I_MUTEX_PARENT);
mutex_lock_nested(&src_inode->i_mutex, I_MUTEX_CHILD);
} else {
@@ -275,7 +283,9 @@
truncate_inode_pages_range(&dst_inode->i_data, dst_off, dst_off + count - 1);
out_unlock:
- if (dst_inode < src_inode) {
+ if (same_inode) {
+ mutex_unlock(&src_inode->i_mutex);
+ } else if (dst_inode < src_inode) {
mutex_unlock(&src_inode->i_mutex);
mutex_unlock(&dst_inode->i_mutex);
} else {
@@ -291,46 +301,31 @@
static long nfs42_ioctl_clone_range(struct file *dst_file, void __user *argp)
{
- struct nfs_ioctl_clone_range_args args;
+ struct btrfs_ioctl_clone_range_args args;
if (copy_from_user(&args, argp, sizeof(args)))
return -EFAULT;
- return nfs42_ioctl_clone(dst_file, args.src_fd, args.src_off, args.dst_off, args.count);
+ return nfs42_ioctl_clone(dst_file, args.src_fd, args.src_offset,
+ args.dest_offset, args.src_length);
}
-#else
-static long nfs42_ioctl_clone(struct file *dst_file, unsigned long srcfd,
- u64 src_off, u64 dst_off, u64 count)
-{
- return -ENOTTY;
-}
-
-static long nfs42_ioctl_clone_range(struct file *dst_file, void __user *argp)
-{
- return -ENOTTY;
-}
-#endif /* CONFIG_NFS_V4_2 */
long nfs4_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
switch (cmd) {
- case NFS_IOC_CLONE:
+ case BTRFS_IOC_CLONE:
return nfs42_ioctl_clone(file, arg, 0, 0, 0);
- case NFS_IOC_CLONE_RANGE:
+ case BTRFS_IOC_CLONE_RANGE:
return nfs42_ioctl_clone_range(file, argp);
}
return -ENOTTY;
}
+#endif /* CONFIG_NFS_V4_2 */
const struct file_operations nfs4_file_operations = {
-#ifdef CONFIG_NFS_V4_2
- .llseek = nfs4_file_llseek,
-#else
- .llseek = nfs_file_llseek,
-#endif
.read_iter = nfs_file_read,
.write_iter = nfs_file_write,
.mmap = nfs_file_mmap,
@@ -342,14 +337,14 @@
.flock = nfs_flock,
.splice_read = nfs_file_splice_read,
.splice_write = iter_file_splice_write,
-#ifdef CONFIG_NFS_V4_2
- .fallocate = nfs42_fallocate,
-#endif /* CONFIG_NFS_V4_2 */
.check_flags = nfs_check_flags,
.setlease = simple_nosetlease,
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_NFS_V4_2
+ .llseek = nfs4_file_llseek,
+ .fallocate = nfs42_fallocate,
.unlocked_ioctl = nfs4_ioctl,
-#else
.compat_ioctl = nfs4_ioctl,
-#endif /* CONFIG_COMPAT */
+#else
+ .llseek = nfs_file_llseek,
+#endif
};
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 765a035..8981803 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7866,7 +7866,7 @@
spin_unlock(&inode->i_lock);
goto out_restart;
}
- if (nfs4_async_handle_error(task, server, state, NULL) == -EAGAIN)
+ if (nfs4_async_handle_error(task, server, state, &lgp->timeout) == -EAGAIN)
goto out_restart;
out:
dprintk("<-- %s\n", __func__);
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index dfed4f5..4e44412 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3615,6 +3615,7 @@
status = 0;
if (unlikely(!(bitmap[0] & FATTR4_WORD0_FS_LOCATIONS)))
goto out;
+ bitmap[0] &= ~FATTR4_WORD0_FS_LOCATIONS;
status = -EIO;
/* Ignore borken servers that return unrequested attrs */
if (unlikely(res == NULL))
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 93496c0..5a8ae21 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -872,33 +872,38 @@
dprintk("--> %s\n", __func__);
- lgp = kzalloc(sizeof(*lgp), gfp_flags);
- if (lgp == NULL)
- return NULL;
-
- i_size = i_size_read(ino);
-
- lgp->args.minlength = PAGE_CACHE_SIZE;
- if (lgp->args.minlength > range->length)
- lgp->args.minlength = range->length;
- if (range->iomode == IOMODE_READ) {
- if (range->offset >= i_size)
- lgp->args.minlength = 0;
- else if (i_size - range->offset < lgp->args.minlength)
- lgp->args.minlength = i_size - range->offset;
- }
- lgp->args.maxcount = PNFS_LAYOUT_MAXSIZE;
- lgp->args.range = *range;
- lgp->args.type = server->pnfs_curr_ld->id;
- lgp->args.inode = ino;
- lgp->args.ctx = get_nfs_open_context(ctx);
- lgp->gfp_flags = gfp_flags;
- lgp->cred = lo->plh_lc_cred;
-
- /* Synchronously retrieve layout information from server and
- * store in lseg.
+ /*
+ * Synchronously retrieve layout information from server and
+ * store in lseg. If we race with a concurrent seqid morphing
+ * op, then re-send the LAYOUTGET.
*/
- lseg = nfs4_proc_layoutget(lgp, gfp_flags);
+ do {
+ lgp = kzalloc(sizeof(*lgp), gfp_flags);
+ if (lgp == NULL)
+ return NULL;
+
+ i_size = i_size_read(ino);
+
+ lgp->args.minlength = PAGE_CACHE_SIZE;
+ if (lgp->args.minlength > range->length)
+ lgp->args.minlength = range->length;
+ if (range->iomode == IOMODE_READ) {
+ if (range->offset >= i_size)
+ lgp->args.minlength = 0;
+ else if (i_size - range->offset < lgp->args.minlength)
+ lgp->args.minlength = i_size - range->offset;
+ }
+ lgp->args.maxcount = PNFS_LAYOUT_MAXSIZE;
+ lgp->args.range = *range;
+ lgp->args.type = server->pnfs_curr_ld->id;
+ lgp->args.inode = ino;
+ lgp->args.ctx = get_nfs_open_context(ctx);
+ lgp->gfp_flags = gfp_flags;
+ lgp->cred = lo->plh_lc_cred;
+
+ lseg = nfs4_proc_layoutget(lgp, gfp_flags);
+ } while (lseg == ERR_PTR(-EAGAIN));
+
if (IS_ERR(lseg)) {
switch (PTR_ERR(lseg)) {
case -ENOMEM:
@@ -1687,6 +1692,7 @@
/* existing state ID, make sure the sequence number matches. */
if (pnfs_layout_stateid_blocked(lo, &res->stateid)) {
dprintk("%s forget reply due to sequence\n", __func__);
+ status = -EAGAIN;
goto out_forget_reply;
}
pnfs_set_layout_stateid(lo, &res->stateid, false);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 3b48ac2..a03f6f4 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -372,6 +372,8 @@
mlog_errno(status);
goto leave;
}
+ /* update inode->i_mode after mask with "umask". */
+ inode->i_mode = mode;
handle = ocfs2_start_trans(osb, ocfs2_mknod_credits(osb->sb,
S_ISDIR(mode),
diff --git a/fs/splice.c b/fs/splice.c
index 801c21c..4cf700d 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -809,6 +809,13 @@
*/
static int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
{
+ /*
+ * Check for signal early to make process killable when there are
+ * always buffers available
+ */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
while (!pipe->nrbufs) {
if (!pipe->writers)
return 0;
@@ -884,6 +891,7 @@
splice_from_pipe_begin(sd);
do {
+ cond_resched();
ret = splice_from_pipe_next(pipe, sd);
if (ret > 0)
ret = splice_from_pipe_feed(pipe, sd, actor);
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 590ad92..02fa1dc 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -162,15 +162,8 @@
inode->i_fop = &sysv_dir_operations;
inode->i_mapping->a_ops = &sysv_aops;
} else if (S_ISLNK(inode->i_mode)) {
- if (inode->i_blocks) {
- inode->i_op = &sysv_symlink_inode_operations;
- inode->i_mapping->a_ops = &sysv_aops;
- } else {
- inode->i_op = &simple_symlink_inode_operations;
- inode->i_link = (char *)SYSV_I(inode)->i_data;
- nd_terminate_link(inode->i_link, inode->i_size,
- sizeof(SYSV_I(inode)->i_data) - 1);
- }
+ inode->i_op = &sysv_symlink_inode_operations;
+ inode->i_mapping->a_ops = &sysv_aops;
} else
init_special_inode(inode, inode->i_mode, rdev);
}
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index e67aeac..4b74c97 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -136,6 +136,9 @@
void drm_atomic_legacy_backoff(struct drm_atomic_state *state);
+void
+drm_atomic_clean_old_fb(struct drm_device *dev, unsigned plane_mask, int ret);
+
int __must_check drm_atomic_check_only(struct drm_atomic_state *state);
int __must_check drm_atomic_commit(struct drm_atomic_state *state);
int __must_check drm_atomic_async_commit(struct drm_atomic_state *state);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index a4a7a9c..edca8985c 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -447,5 +447,6 @@
#define IMX7D_SEMA4_HS_ROOT_CLK 434
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
-#define IMX7D_CLK_END 437
+#define IMX7D_CLK_ARM 437
+#define IMX7D_CLK_END 438
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index dd09b73..ffa1137 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -102,6 +102,7 @@
#define R8A7791_CLK_VIN2 9
#define R8A7791_CLK_VIN1 10
#define R8A7791_CLK_VIN0 11
+#define R8A7791_CLK_ETHERAVB 12
#define R8A7791_CLK_ETHER 13
#define R8A7791_CLK_SATA1 14
#define R8A7791_CLK_SATA0 15
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index 09da38a..a7a7e03 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -79,6 +79,7 @@
#define R8A7794_CLK_SCIF2 19
#define R8A7794_CLK_SCIF1 20
#define R8A7794_CLK_SCIF0 21
+#define R8A7794_CLK_DU0 24
/* MSTP8 */
#define R8A7794_CLK_VIN1 10
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
new file mode 100644
index 0000000..ebc7a7b
--- /dev/null
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_GPLL 3
+#define ARMCLK 4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI 65
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_NANDC 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_OTGPHY0 93
+#define SCLK_LCDC 100
+#define SCLK_HDMI 109
+#define SCLK_HEVC 111
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+#define SCLK_PVTM_VIDEO 125
+#define SCLK_MAC 151
+#define SCLK_MACREF 152
+#define SCLK_SFC 160
+
+/* aclk gates */
+#define ACLK_DMAC2 194
+#define ACLK_LCDC 197
+#define ACLK_VIO 203
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_SPI 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_HDMI 360
+#define PCLK_CPU 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL 364
+#define PCLK_WDT 368
+#define PCLK_ACODEC 369
+
+/* hclk gates */
+#define HCLK_OTG0 449
+#define HCLK_OTG1 450
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_I2S 462
+#define HCLK_LCDC 465
+#define HCLK_ROM 467
+#define HCLK_VIO_BUS 472
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE0_DBG 4
+#define SRST_CORE1_DBG 5
+#define SRST_CORE0_POR 8
+#define SRST_CORE1_POR 9
+#define SRST_L2C 12
+#define SRST_TOPDBG 13
+#define SRST_STRC_SYS_A 14
+#define SRST_PD_CORE_NIU 15
+
+#define SRST_TIMER2 16
+#define SRST_CPUSYS_H 17
+#define SRST_AHB2APB_H 19
+#define SRST_TIMER3 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_PERI_NIU 23
+#define SRST_I2S 24
+#define SRST_DDR_PLL 25
+#define SRST_GPU_DLL 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_CORE_DLL 29
+#define SRST_EFUSE_P 30
+#define SRST_ACODEC_P 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_SFC 47
+
+#define SRST_PWM0 48
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_GRF 55
+#define SRST_PERIPHSYS_A 57
+#define SRST_PERIPHSYS_H 58
+#define SRST_PERIPHSYS_P 59
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_MAC 66
+#define SRST_NANDC 68
+#define SRST_USBOTG0 69
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_OTGC1 74
+#define SRST_DDRMSCH 79
+
+#define SRST_MMC0 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_WDT 86
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_BUS_H 99
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_USBPOR 105
+
+#define SRST_VCODEC_A 112
+#define SRST_VCODEC_H 113
+#define SRST_VIO1_A 114
+#define SRST_HEVC 115
+#define SRST_VCODEC_NIU_A 116
+#define SRST_LCDC1_A 117
+#define SRST_LCDC1_H 118
+#define SRST_LCDC1_D 119
+#define SRST_GPU 120
+#define SRST_GPU_NIU_A 122
+
+#define SRST_DBG_P 131
+
+#endif
diff --git a/include/dt-bindings/clock/rk3228-cru.h b/include/dt-bindings/clock/rk3228-cru.h
new file mode 100644
index 0000000..a78dd89
--- /dev/null
+++ b/include/dt-bindings/clock/rk3228-cru.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Jeffy Chen <jeffy.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define ARMCLK 5
+
+/* sclk gates (special clocks) */
+#define SCLK_SPI0 65
+#define SCLK_NANDC 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S0 80
+#define SCLK_I2S1 81
+#define SCLK_I2S2 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+
+/* aclk gates */
+#define ACLK_DMAC 194
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_SPI0 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_PERI 363
+
+/* hclk gates */
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0_PO 0
+#define SRST_CORE1_PO 1
+#define SRST_CORE2_PO 2
+#define SRST_CORE3_PO 3
+#define SRST_CORE0 4
+#define SRST_CORE1 5
+#define SRST_CORE2 6
+#define SRST_CORE3 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+#define SRST_TOPDBG 12
+#define SRST_ACLK_CORE 13
+#define SRST_NOC 14
+#define SRST_L2C 15
+
+#define SRST_CPUSYS_H 18
+#define SRST_BUSSYS_H 19
+#define SRST_SPDIF 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_OTG_ADP 23
+#define SRST_I2S0 24
+#define SRST_I2S1 25
+#define SRST_I2S2 26
+#define SRST_ACODEC_P 27
+#define SRST_DFIMON 28
+#define SRST_MSCH 29
+#define SRST_EFUSE1024 30
+#define SRST_EFUSE256 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_PERIPH_NOC_A 36
+#define SRST_PERIPH_NOC_BUS_H 37
+#define SRST_PERIPH_NOC_P 38
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_PHYNOC 42
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_I2C3 46
+
+#define SRST_PWM 48
+#define SRST_A53_GIC 49
+#define SRST_DAP 51
+#define SRST_DAP_NOC 52
+#define SRST_CRYPTO 53
+#define SRST_SGRF 54
+#define SRST_GRF 55
+#define SRST_GMAC 56
+#define SRST_PERIPH_NOC_H 58
+#define SRST_MACPHY 63
+
+#define SRST_DMA 64
+#define SRST_NANDC 68
+#define SRST_USBOTG 69
+#define SRST_OTGC 70
+#define SRST_USBHOST0 71
+#define SRST_HOST_CTRL0 72
+#define SRST_USBHOST1 73
+#define SRST_HOST_CTRL1 74
+#define SRST_USBHOST2 75
+#define SRST_HOST_CTRL2 76
+#define SRST_USBPOR0 77
+#define SRST_USBPOR1 78
+#define SRST_DDRMSCH 79
+
+#define SRST_SMART_CARD 80
+#define SRST_SDMMC 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI 84
+#define SRST_TSP_H 85
+#define SRST_TSP 86
+#define SRST_TSADC 87
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+#define SRST_HOST0_ECHI 92
+#define SRST_HOST1_ECHI 93
+#define SRST_HOST2_ECHI 94
+#define SRST_VOP_NOC_A 95
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_ARBI_H 97
+#define SRST_IEP_NOC_A 98
+#define SRST_VIO_NOC_H 99
+#define SRST_VOP_A 100
+#define SRST_VOP_H 101
+#define SRST_VOP_D 102
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_UTMI2 105
+#define SRST_UTMI3 106
+#define SRST_RGA 107
+#define SRST_RGA_NOC_A 108
+#define SRST_RGA_A 109
+#define SRST_RGA_H 110
+#define SRST_HDCP_A 111
+
+#define SRST_VPU_A 112
+#define SRST_VPU_H 113
+#define SRST_VPU_NOC_A 116
+#define SRST_VPU_NOC_H 117
+#define SRST_RKVDEC_A 118
+#define SRST_RKVDEC_NOC_A 119
+#define SRST_RKVDEC_H 120
+#define SRST_RKVDEC_NOC_H 121
+#define SRST_RKVDEC_CORE 122
+#define SRST_RKVDEC_CABAC 123
+#define SRST_IEP_A 124
+#define SRST_IEP_H 125
+#define SRST_GPU_A 126
+#define SRST_GPU_NOC_A 127
+
+#define SRST_CORE_DBG 128
+#define SRST_DBG_P 129
+#define SRST_TIMER0 130
+#define SRST_TIMER1 131
+#define SRST_TIMER2 132
+#define SRST_TIMER3 133
+#define SRST_TIMER4 134
+#define SRST_TIMER5 135
+#define SRST_VIO_H2P 136
+#define SRST_HDMIPHY 139
+#define SRST_VDAC 140
+#define SRST_TIMER_6CH_P 141
+
+#endif
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index c719aac..9a586e2 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,8 @@
#define SCLK_USBPHY480M_SRC 122
#define SCLK_PVTM_CORE 123
#define SCLK_PVTM_GPU 124
+#define SCLK_CRYPTO 125
+#define SCLK_MIPIDSI_24M 126
#define SCLK_MAC 151
#define SCLK_MACREF_OUT 152
@@ -164,6 +166,8 @@
#define PCLK_DDRUPCTL1 366
#define PCLK_PUBL1 367
#define PCLK_WDT 368
+#define PCLK_EFUSE256 369
+#define PCLK_EFUSE1024 370
/* hclk gates */
#define HCLK_GPS 448
diff --git a/include/dt-bindings/clock/sh73a0-clock.h b/include/dt-bindings/clock/sh73a0-clock.h
index 5336956..2eca353a 100644
--- a/include/dt-bindings/clock/sh73a0-clock.h
+++ b/include/dt-bindings/clock/sh73a0-clock.h
@@ -28,7 +28,8 @@
#define SH73A0_CLK_HP 14
/* MSTP0 */
-#define SH73A0_CLK_IIC2 1
+#define SH73A0_CLK_IIC2 1
+#define SH73A0_CLK_MSIOF0 0
/* MSTP1 */
#define SH73A0_CLK_CEU1 29
@@ -45,8 +46,11 @@
#define SH73A0_CLK_SCIFA7 19
#define SH73A0_CLK_SY_DMAC 18
#define SH73A0_CLK_MP_DMAC 17
+#define SH73A0_CLK_MSIOF3 15
+#define SH73A0_CLK_MSIOF1 8
#define SH73A0_CLK_SCIFA5 7
#define SH73A0_CLK_SCIFB 6
+#define SH73A0_CLK_MSIOF2 5
#define SH73A0_CLK_SCIFA0 4
#define SH73A0_CLK_SCIFA1 3
#define SH73A0_CLK_SCIFA2 2
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index 774dc1e..344bd1e 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -31,5 +31,11 @@
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN)
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define AM4372_IOPAD(pa, val) (((pa) & 0xffff) - 0x0800) (val)
+
#endif
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 4379e29..5c75e80 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -67,5 +67,11 @@
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)
+
#endif
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 1394925..8100de1 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -63,8 +63,6 @@
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
/*
* Macros to allow using the offset from the padconf physical address
diff --git a/include/dt-bindings/reset-controller/mt8135-resets.h b/include/dt-bindings/reset/mt8135-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8135-resets.h
rename to include/dt-bindings/reset/mt8135-resets.h
diff --git a/include/dt-bindings/reset-controller/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
similarity index 100%
rename from include/dt-bindings/reset-controller/mt8173-resets.h
rename to include/dt-bindings/reset/mt8173-resets.h
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 9c747cb..d2f4147 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -342,10 +342,10 @@
struct irq_phys_map *map, bool level);
void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg);
int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu);
-int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu);
struct irq_phys_map *kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu,
int virt_irq, int irq);
int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
+bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map);
#define irqchip_in_kernel(k) (!!((k)->arch.vgic.in_kernel))
#define vgic_initialized(k) (!!((k)->arch.vgic.nr_cpus))
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3fe27f8..c0d2b79 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -794,6 +794,8 @@
extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
struct scsi_ioctl_command __user *);
+extern int blk_queue_enter(struct request_queue *q, gfp_t gfp);
+extern void blk_queue_exit(struct request_queue *q);
extern void blk_start_queue(struct request_queue *q);
extern void blk_stop_queue(struct request_queue *q);
extern void blk_sync_queue(struct request_queue *q);
diff --git a/include/linux/configfs.h b/include/linux/configfs.h
index a8a335b..758a029 100644
--- a/include/linux/configfs.h
+++ b/include/linux/configfs.h
@@ -197,6 +197,16 @@
int configfs_register_subsystem(struct configfs_subsystem *subsys);
void configfs_unregister_subsystem(struct configfs_subsystem *subsys);
+int configfs_register_group(struct config_group *parent_group,
+ struct config_group *group);
+void configfs_unregister_group(struct config_group *group);
+
+struct config_group *
+configfs_register_default_group(struct config_group *parent_group,
+ const char *name,
+ struct config_item_type *item_type);
+void configfs_unregister_default_group(struct config_group *group);
+
/* These functions can sleep and can alloc with GFP_KERNEL */
/* WARNING: These cannot be called underneath configfs callbacks!! */
int configfs_depend_item(struct configfs_subsystem *subsys, struct config_item *target);
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index 6523109..8942af0 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -271,7 +271,7 @@
static inline bool gfpflags_allow_blocking(const gfp_t gfp_flags)
{
- return gfp_flags & __GFP_DIRECT_RECLAIM;
+ return (bool __force)(gfp_flags & __GFP_DIRECT_RECLAIM);
}
#ifdef CONFIG_HIGHMEM
diff --git a/include/linux/kref.h b/include/linux/kref.h
index 484604d..e15828f 100644
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -19,7 +19,6 @@
#include <linux/atomic.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
-#include <linux/spinlock.h>
struct kref {
atomic_t refcount;
@@ -99,38 +98,6 @@
return kref_sub(kref, 1, release);
}
-/**
- * kref_put_spinlock_irqsave - decrement refcount for object.
- * @kref: object.
- * @release: pointer to the function that will clean up the object when the
- * last reference to the object is released.
- * This pointer is required, and it is not acceptable to pass kfree
- * in as this function.
- * @lock: lock to take in release case
- *
- * Behaves identical to kref_put with one exception. If the reference count
- * drops to zero, the lock will be taken atomically wrt dropping the reference
- * count. The release function has to call spin_unlock() without _irqrestore.
- */
-static inline int kref_put_spinlock_irqsave(struct kref *kref,
- void (*release)(struct kref *kref),
- spinlock_t *lock)
-{
- unsigned long flags;
-
- WARN_ON(release == NULL);
- if (atomic_add_unless(&kref->refcount, -1, 1))
- return 0;
- spin_lock_irqsave(lock, flags);
- if (atomic_dec_and_test(&kref->refcount)) {
- release(kref);
- local_irq_restore(flags);
- return 1;
- }
- spin_unlock_irqrestore(lock, flags);
- return 0;
-}
-
static inline int kref_put_mutex(struct kref *kref,
void (*release)(struct kref *kref),
struct mutex *lock)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 5706a21..c923350 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -460,6 +460,17 @@
(vcpup = kvm_get_vcpu(kvm, idx)) != NULL; \
idx++)
+static inline struct kvm_vcpu *kvm_get_vcpu_by_id(struct kvm *kvm, int id)
+{
+ struct kvm_vcpu *vcpu;
+ int i;
+
+ kvm_for_each_vcpu(i, vcpu, kvm)
+ if (vcpu->vcpu_id == id)
+ return vcpu;
+ return NULL;
+}
+
#define kvm_for_each_memslot(memslot, slots) \
for (memslot = &slots->memslots[0]; \
memslot < slots->memslots + KVM_MEM_SLOTS_NUM && memslot->npages;\
diff --git a/include/linux/lightnvm.h b/include/linux/lightnvm.h
index 69c9057..3db5552 100644
--- a/include/linux/lightnvm.h
+++ b/include/linux/lightnvm.h
@@ -58,7 +58,6 @@
struct nvm_id_group {
u8 mtype;
u8 fmtype;
- u16 res16;
u8 num_ch;
u8 num_lun;
u8 num_pln;
@@ -74,9 +73,9 @@
u32 tbet;
u32 tbem;
u32 mpos;
+ u32 mccap;
u16 cpar;
- u8 res[913];
-} __packed;
+};
struct nvm_addr_format {
u8 ch_offset;
@@ -91,19 +90,15 @@
u8 pg_len;
u8 sect_offset;
u8 sect_len;
- u8 res[4];
};
struct nvm_id {
u8 ver_id;
u8 vmnt;
u8 cgrps;
- u8 res[5];
u32 cap;
u32 dom;
struct nvm_addr_format ppaf;
- u8 ppat;
- u8 resv[224];
struct nvm_id_group groups[4];
} __packed;
@@ -123,39 +118,28 @@
#define NVM_VERSION_MINOR 0
#define NVM_VERSION_PATCH 0
-#define NVM_SEC_BITS (8)
-#define NVM_PL_BITS (6)
-#define NVM_PG_BITS (16)
#define NVM_BLK_BITS (16)
-#define NVM_LUN_BITS (10)
+#define NVM_PG_BITS (16)
+#define NVM_SEC_BITS (8)
+#define NVM_PL_BITS (8)
+#define NVM_LUN_BITS (8)
#define NVM_CH_BITS (8)
struct ppa_addr {
+ /* Generic structure for all addresses */
union {
- /* Channel-based PPA format in nand 4x2x2x2x8x10 */
struct {
- u64 ch : 4;
- u64 sec : 2; /* 4 sectors per page */
- u64 pl : 2; /* 4 planes per LUN */
- u64 lun : 2; /* 4 LUNs per channel */
- u64 pg : 8; /* 256 pages per block */
- u64 blk : 10;/* 1024 blocks per plane */
- u64 resved : 36;
- } chnl;
-
- /* Generic structure for all addresses */
- struct {
+ u64 blk : NVM_BLK_BITS;
+ u64 pg : NVM_PG_BITS;
u64 sec : NVM_SEC_BITS;
u64 pl : NVM_PL_BITS;
- u64 pg : NVM_PG_BITS;
- u64 blk : NVM_BLK_BITS;
u64 lun : NVM_LUN_BITS;
u64 ch : NVM_CH_BITS;
} g;
u64 ppa;
};
-} __packed;
+};
struct nvm_rq {
struct nvm_tgt_instance *ins;
@@ -191,11 +175,11 @@
struct nvm_block;
typedef int (nvm_l2p_update_fn)(u64, u32, __le64 *, void *);
-typedef int (nvm_bb_update_fn)(u32, void *, unsigned int, void *);
+typedef int (nvm_bb_update_fn)(struct ppa_addr, int, u8 *, void *);
typedef int (nvm_id_fn)(struct request_queue *, struct nvm_id *);
typedef int (nvm_get_l2p_tbl_fn)(struct request_queue *, u64, u32,
nvm_l2p_update_fn *, void *);
-typedef int (nvm_op_bb_tbl_fn)(struct request_queue *, int, unsigned int,
+typedef int (nvm_op_bb_tbl_fn)(struct request_queue *, struct ppa_addr, int,
nvm_bb_update_fn *, void *);
typedef int (nvm_op_set_bb_fn)(struct request_queue *, struct nvm_rq *, int);
typedef int (nvm_submit_io_fn)(struct request_queue *, struct nvm_rq *);
@@ -210,7 +194,7 @@
nvm_id_fn *identity;
nvm_get_l2p_tbl_fn *get_l2p_tbl;
nvm_op_bb_tbl_fn *get_bb_tbl;
- nvm_op_set_bb_fn *set_bb;
+ nvm_op_set_bb_fn *set_bb_tbl;
nvm_submit_io_fn *submit_io;
nvm_erase_blk_fn *erase_block;
@@ -220,7 +204,7 @@
nvm_dev_dma_alloc_fn *dev_dma_alloc;
nvm_dev_dma_free_fn *dev_dma_free;
- uint8_t max_phys_sect;
+ unsigned int max_phys_sect;
};
struct nvm_lun {
@@ -229,7 +213,9 @@
int lun_id;
int chnl_id;
+ unsigned int nr_inuse_blocks; /* Number of used blocks */
unsigned int nr_free_blocks; /* Number of unused blocks */
+ unsigned int nr_bad_blocks; /* Number of bad blocks */
struct nvm_block *blocks;
spinlock_t lock;
@@ -263,8 +249,7 @@
int blks_per_lun;
int sec_size;
int oob_size;
- int addr_mode;
- struct nvm_addr_format addr_format;
+ struct nvm_addr_format ppaf;
/* Calculated/Cached values. These do not reflect the actual usable
* blocks at run-time.
@@ -290,118 +275,45 @@
char name[DISK_NAME_LEN];
};
-/* fallback conversion */
-static struct ppa_addr __generic_to_linear_addr(struct nvm_dev *dev,
- struct ppa_addr r)
+static inline struct ppa_addr generic_to_dev_addr(struct nvm_dev *dev,
+ struct ppa_addr r)
{
struct ppa_addr l;
- l.ppa = r.g.sec +
- r.g.pg * dev->sec_per_pg +
- r.g.blk * (dev->pgs_per_blk *
- dev->sec_per_pg) +
- r.g.lun * (dev->blks_per_lun *
- dev->pgs_per_blk *
- dev->sec_per_pg) +
- r.g.ch * (dev->blks_per_lun *
- dev->pgs_per_blk *
- dev->luns_per_chnl *
- dev->sec_per_pg);
+ l.ppa = ((u64)r.g.blk) << dev->ppaf.blk_offset;
+ l.ppa |= ((u64)r.g.pg) << dev->ppaf.pg_offset;
+ l.ppa |= ((u64)r.g.sec) << dev->ppaf.sect_offset;
+ l.ppa |= ((u64)r.g.pl) << dev->ppaf.pln_offset;
+ l.ppa |= ((u64)r.g.lun) << dev->ppaf.lun_offset;
+ l.ppa |= ((u64)r.g.ch) << dev->ppaf.ch_offset;
return l;
}
-/* fallback conversion */
-static struct ppa_addr __linear_to_generic_addr(struct nvm_dev *dev,
- struct ppa_addr r)
-{
- struct ppa_addr l;
- int secs, pgs, blks, luns;
- sector_t ppa = r.ppa;
-
- l.ppa = 0;
-
- div_u64_rem(ppa, dev->sec_per_pg, &secs);
- l.g.sec = secs;
-
- sector_div(ppa, dev->sec_per_pg);
- div_u64_rem(ppa, dev->sec_per_blk, &pgs);
- l.g.pg = pgs;
-
- sector_div(ppa, dev->pgs_per_blk);
- div_u64_rem(ppa, dev->blks_per_lun, &blks);
- l.g.blk = blks;
-
- sector_div(ppa, dev->blks_per_lun);
- div_u64_rem(ppa, dev->luns_per_chnl, &luns);
- l.g.lun = luns;
-
- sector_div(ppa, dev->luns_per_chnl);
- l.g.ch = ppa;
-
- return l;
-}
-
-static struct ppa_addr __generic_to_chnl_addr(struct ppa_addr r)
+static inline struct ppa_addr dev_to_generic_addr(struct nvm_dev *dev,
+ struct ppa_addr r)
{
struct ppa_addr l;
- l.ppa = 0;
-
- l.chnl.sec = r.g.sec;
- l.chnl.pl = r.g.pl;
- l.chnl.pg = r.g.pg;
- l.chnl.blk = r.g.blk;
- l.chnl.lun = r.g.lun;
- l.chnl.ch = r.g.ch;
+ /*
+ * (r.ppa << X offset) & X len bitmask. X eq. blk, pg, etc.
+ */
+ l.g.blk = (r.ppa >> dev->ppaf.blk_offset) &
+ (((1 << dev->ppaf.blk_len) - 1));
+ l.g.pg |= (r.ppa >> dev->ppaf.pg_offset) &
+ (((1 << dev->ppaf.pg_len) - 1));
+ l.g.sec |= (r.ppa >> dev->ppaf.sect_offset) &
+ (((1 << dev->ppaf.sect_len) - 1));
+ l.g.pl |= (r.ppa >> dev->ppaf.pln_offset) &
+ (((1 << dev->ppaf.pln_len) - 1));
+ l.g.lun |= (r.ppa >> dev->ppaf.lun_offset) &
+ (((1 << dev->ppaf.lun_len) - 1));
+ l.g.ch |= (r.ppa >> dev->ppaf.ch_offset) &
+ (((1 << dev->ppaf.ch_len) - 1));
return l;
}
-static struct ppa_addr __chnl_to_generic_addr(struct ppa_addr r)
-{
- struct ppa_addr l;
-
- l.ppa = 0;
-
- l.g.sec = r.chnl.sec;
- l.g.pl = r.chnl.pl;
- l.g.pg = r.chnl.pg;
- l.g.blk = r.chnl.blk;
- l.g.lun = r.chnl.lun;
- l.g.ch = r.chnl.ch;
-
- return l;
-}
-
-static inline struct ppa_addr addr_to_generic_mode(struct nvm_dev *dev,
- struct ppa_addr gppa)
-{
- switch (dev->addr_mode) {
- case NVM_ADDRMODE_LINEAR:
- return __linear_to_generic_addr(dev, gppa);
- case NVM_ADDRMODE_CHANNEL:
- return __chnl_to_generic_addr(gppa);
- default:
- BUG();
- }
- return gppa;
-}
-
-static inline struct ppa_addr generic_to_addr_mode(struct nvm_dev *dev,
- struct ppa_addr gppa)
-{
- switch (dev->addr_mode) {
- case NVM_ADDRMODE_LINEAR:
- return __generic_to_linear_addr(dev, gppa);
- case NVM_ADDRMODE_CHANNEL:
- return __generic_to_chnl_addr(gppa);
- default:
- BUG();
- }
- return gppa;
-}
-
static inline int ppa_empty(struct ppa_addr ppa_addr)
{
return (ppa_addr.ppa == ADDR_EMPTY);
@@ -468,7 +380,7 @@
typedef int (nvmm_erase_blk_fn)(struct nvm_dev *, struct nvm_block *,
unsigned long);
typedef struct nvm_lun *(nvmm_get_lun_fn)(struct nvm_dev *, int);
-typedef void (nvmm_free_blocks_print_fn)(struct nvm_dev *);
+typedef void (nvmm_lun_info_print_fn)(struct nvm_dev *);
struct nvmm_type {
const char *name;
@@ -492,7 +404,7 @@
nvmm_get_lun_fn *get_lun;
/* Statistics */
- nvmm_free_blocks_print_fn *free_blocks_print;
+ nvmm_lun_info_print_fn *lun_info_print;
struct list_head list;
};
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index e6982ac..a57f0df 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -16,6 +16,7 @@
#define MARVELL_PHY_ID_88E1318S 0x01410e90
#define MARVELL_PHY_ID_88E1116R 0x01410e40
#define MARVELL_PHY_ID_88E1510 0x01410dd0
+#define MARVELL_PHY_ID_88E1540 0x01410eb0
#define MARVELL_PHY_ID_88E3016 0x01410e60
/* struct phy_device dev_flags definitions */
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index dd20974..1565324 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -453,26 +453,28 @@
u8 lro_cap[0x1];
u8 lro_psh_flag[0x1];
u8 lro_time_stamp[0x1];
- u8 reserved_0[0x6];
+ u8 reserved_0[0x3];
+ u8 self_lb_en_modifiable[0x1];
+ u8 reserved_1[0x2];
u8 max_lso_cap[0x5];
- u8 reserved_1[0x4];
+ u8 reserved_2[0x4];
u8 rss_ind_tbl_cap[0x4];
- u8 reserved_2[0x3];
+ u8 reserved_3[0x3];
u8 tunnel_lso_const_out_ip_id[0x1];
- u8 reserved_3[0x2];
+ u8 reserved_4[0x2];
u8 tunnel_statless_gre[0x1];
u8 tunnel_stateless_vxlan[0x1];
- u8 reserved_4[0x20];
+ u8 reserved_5[0x20];
- u8 reserved_5[0x10];
+ u8 reserved_6[0x10];
u8 lro_min_mss_size[0x10];
- u8 reserved_6[0x120];
+ u8 reserved_7[0x120];
u8 lro_timer_supported_periods[4][0x20];
- u8 reserved_7[0x600];
+ u8 reserved_8[0x600];
};
struct mlx5_ifc_roce_cap_bits {
@@ -4051,9 +4053,11 @@
};
struct mlx5_ifc_modify_tir_bitmask_bits {
- u8 reserved[0x20];
+ u8 reserved_0[0x20];
- u8 reserved1[0x1f];
+ u8 reserved_1[0x1b];
+ u8 self_lb_en[0x1];
+ u8 reserved_2[0x3];
u8 lro[0x1];
};
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index d208914..67bfac1 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2068,20 +2068,23 @@
struct u64_stats_sync syncp;
};
-#define netdev_alloc_pcpu_stats(type) \
-({ \
- typeof(type) __percpu *pcpu_stats = alloc_percpu(type); \
- if (pcpu_stats) { \
- int __cpu; \
- for_each_possible_cpu(__cpu) { \
- typeof(type) *stat; \
- stat = per_cpu_ptr(pcpu_stats, __cpu); \
- u64_stats_init(&stat->syncp); \
- } \
- } \
- pcpu_stats; \
+#define __netdev_alloc_pcpu_stats(type, gfp) \
+({ \
+ typeof(type) __percpu *pcpu_stats = alloc_percpu_gfp(type, gfp);\
+ if (pcpu_stats) { \
+ int __cpu; \
+ for_each_possible_cpu(__cpu) { \
+ typeof(type) *stat; \
+ stat = per_cpu_ptr(pcpu_stats, __cpu); \
+ u64_stats_init(&stat->syncp); \
+ } \
+ } \
+ pcpu_stats; \
})
+#define netdev_alloc_pcpu_stats(type) \
+ __netdev_alloc_pcpu_stats(type, GFP_KERNEL);
+
#include <linux/notifier.h>
/* netdevice notifier chain. Please remember to update the rtnetlink
@@ -3854,6 +3857,11 @@
return dev->priv_flags & IFF_EBRIDGE;
}
+static inline bool netif_is_bridge_port(const struct net_device *dev)
+{
+ return dev->priv_flags & IFF_BRIDGE_PORT;
+}
+
static inline bool netif_is_ovs_master(const struct net_device *dev)
{
return dev->priv_flags & IFF_OPENVSWITCH;
diff --git a/include/linux/netfilter/ipset/ip_set.h b/include/linux/netfilter/ipset/ip_set.h
index 48bb01e..0e1f433 100644
--- a/include/linux/netfilter/ipset/ip_set.h
+++ b/include/linux/netfilter/ipset/ip_set.h
@@ -421,7 +421,7 @@
extern int ip_set_get_ipaddr4(struct nlattr *nla, __be32 *ipaddr);
extern int ip_set_get_ipaddr6(struct nlattr *nla, union nf_inet_addr *ipaddr);
extern size_t ip_set_elem_len(struct ip_set *set, struct nlattr *tb[],
- size_t len);
+ size_t len, size_t align);
extern int ip_set_get_extensions(struct ip_set *set, struct nlattr *tb[],
struct ip_set_ext *ext);
diff --git a/include/linux/netfilter_ingress.h b/include/linux/netfilter_ingress.h
index 187feab..5fcd375 100644
--- a/include/linux/netfilter_ingress.h
+++ b/include/linux/netfilter_ingress.h
@@ -5,10 +5,13 @@
#include <linux/netdevice.h>
#ifdef CONFIG_NETFILTER_INGRESS
-static inline int nf_hook_ingress_active(struct sk_buff *skb)
+static inline bool nf_hook_ingress_active(const struct sk_buff *skb)
{
- return nf_hook_list_active(&skb->dev->nf_hooks_ingress,
- NFPROTO_NETDEV, NF_NETDEV_INGRESS);
+#ifdef HAVE_JUMP_LABEL
+ if (!static_key_false(&nf_hooks_needed[NFPROTO_NETDEV][NF_NETDEV_INGRESS]))
+ return false;
+#endif
+ return !list_empty(&skb->dev->nf_hooks_ingress);
}
static inline int nf_hook_ingress(struct sk_buff *skb)
@@ -16,8 +19,8 @@
struct nf_hook_state state;
nf_hook_state_init(&state, &skb->dev->nf_hooks_ingress,
- NF_NETDEV_INGRESS, INT_MIN, NFPROTO_NETDEV, NULL,
- skb->dev, NULL, dev_net(skb->dev), NULL);
+ NF_NETDEV_INGRESS, INT_MIN, NFPROTO_NETDEV,
+ skb->dev, NULL, NULL, dev_net(skb->dev), NULL);
return nf_hook_slow(skb, &state);
}
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 570d630..11bbae4 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -251,6 +251,7 @@
struct nfs4_layoutget_res res;
struct rpc_cred *cred;
gfp_t gfp_flags;
+ long timeout;
};
struct nfs4_getdeviceinfo_args {
diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h
index 36112cd..b90d8ec 100644
--- a/include/linux/of_dma.h
+++ b/include/linux/of_dma.h
@@ -80,7 +80,7 @@
static inline struct dma_chan *of_dma_request_slave_channel(struct device_node *np,
const char *name)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static inline struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e828e7b..6ae25aa 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -412,9 +412,18 @@
void (*release_fn)(struct pci_host_bridge *);
void *release_data;
unsigned int ignore_reset_delay:1; /* for entire hierarchy */
+ /* Resource alignment requirements */
+ resource_size_t (*align_resource)(struct pci_dev *dev,
+ const struct resource *res,
+ resource_size_t start,
+ resource_size_t size,
+ resource_size_t align);
};
#define to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
+
+struct pci_host_bridge *pci_find_host_bridge(struct pci_bus *bus);
+
void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
void (*release_fn)(struct pci_host_bridge *),
void *release_data);
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index e2878ba..4299f4b 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -72,7 +72,7 @@
struct edma_rsv_info *rsv;
/* List of channels allocated for memcpy, terminated with -1 */
- s16 *memcpy_channels;
+ s32 *memcpy_channels;
s8 (*queue_priority_mapping)[2];
const s16 (*xbar_chans)[2];
diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h
index 80af3cd..72ce932 100644
--- a/include/linux/scpi_protocol.h
+++ b/include/linux/scpi_protocol.h
@@ -71,7 +71,7 @@
int (*sensor_get_value)(u16, u32 *);
};
-#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL)
+#if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL)
struct scpi_ops *get_scpi_ops(void);
#else
static inline struct scpi_ops *get_scpi_ops(void) { return NULL; }
diff --git a/include/linux/signal.h b/include/linux/signal.h
index ab1e039..92557bb 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -239,7 +239,6 @@
extern void set_current_blocked(sigset_t *);
extern void __set_current_blocked(const sigset_t *);
extern int show_unhandled_signals;
-extern int sigsuspend(sigset_t *);
struct sigaction {
#ifndef __ARCH_HAS_IRIX_SIGACTION
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 7c82e3b..2037a86 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -158,6 +158,24 @@
#endif
/*
+ * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment.
+ * Intended for arches that get misalignment faults even for 64 bit integer
+ * aligned buffers.
+ */
+#ifndef ARCH_SLAB_MINALIGN
+#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
+#endif
+
+/*
+ * kmalloc and friends return ARCH_KMALLOC_MINALIGN aligned
+ * pointers. kmem_cache_alloc and friends return ARCH_SLAB_MINALIGN
+ * aligned pointers.
+ */
+#define __assume_kmalloc_alignment __assume_aligned(ARCH_KMALLOC_MINALIGN)
+#define __assume_slab_alignment __assume_aligned(ARCH_SLAB_MINALIGN)
+#define __assume_page_alignment __assume_aligned(PAGE_SIZE)
+
+/*
* Kmalloc array related definitions
*/
@@ -286,8 +304,8 @@
}
#endif /* !CONFIG_SLOB */
-void *__kmalloc(size_t size, gfp_t flags);
-void *kmem_cache_alloc(struct kmem_cache *, gfp_t flags);
+void *__kmalloc(size_t size, gfp_t flags) __assume_kmalloc_alignment;
+void *kmem_cache_alloc(struct kmem_cache *, gfp_t flags) __assume_slab_alignment;
void kmem_cache_free(struct kmem_cache *, void *);
/*
@@ -298,11 +316,11 @@
* Note that interrupts must be enabled when calling these functions.
*/
void kmem_cache_free_bulk(struct kmem_cache *, size_t, void **);
-bool kmem_cache_alloc_bulk(struct kmem_cache *, gfp_t, size_t, void **);
+int kmem_cache_alloc_bulk(struct kmem_cache *, gfp_t, size_t, void **);
#ifdef CONFIG_NUMA
-void *__kmalloc_node(size_t size, gfp_t flags, int node);
-void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
+void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_kmalloc_alignment;
+void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node) __assume_slab_alignment;
#else
static __always_inline void *__kmalloc_node(size_t size, gfp_t flags, int node)
{
@@ -316,12 +334,12 @@
#endif
#ifdef CONFIG_TRACING
-extern void *kmem_cache_alloc_trace(struct kmem_cache *, gfp_t, size_t);
+extern void *kmem_cache_alloc_trace(struct kmem_cache *, gfp_t, size_t) __assume_slab_alignment;
#ifdef CONFIG_NUMA
extern void *kmem_cache_alloc_node_trace(struct kmem_cache *s,
gfp_t gfpflags,
- int node, size_t size);
+ int node, size_t size) __assume_slab_alignment;
#else
static __always_inline void *
kmem_cache_alloc_node_trace(struct kmem_cache *s,
@@ -354,10 +372,10 @@
}
#endif /* CONFIG_TRACING */
-extern void *kmalloc_order(size_t size, gfp_t flags, unsigned int order);
+extern void *kmalloc_order(size_t size, gfp_t flags, unsigned int order) __assume_page_alignment;
#ifdef CONFIG_TRACING
-extern void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order);
+extern void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order) __assume_page_alignment;
#else
static __always_inline void *
kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order)
@@ -482,15 +500,6 @@
return __kmalloc_node(size, flags, node);
}
-/*
- * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment.
- * Intended for arches that get misalignment faults even for 64 bit integer
- * aligned buffers.
- */
-#ifndef ARCH_SLAB_MINALIGN
-#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
-#endif
-
struct memcg_cache_array {
struct rcu_head rcu;
struct kmem_cache *entries[0];
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a156b82..c2b66a2 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -524,7 +524,7 @@
asmlinkage long sys_lchown(const char __user *filename,
uid_t user, gid_t group);
asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group);
-#ifdef CONFIG_UID16
+#ifdef CONFIG_HAVE_UID16
asmlinkage long sys_chown16(const char __user *filename,
old_uid_t user, old_gid_t group);
asmlinkage long sys_lchown16(const char __user *filename,
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 4014a59..613c29b 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -438,7 +438,8 @@
static inline int thermal_zone_bind_cooling_device(
struct thermal_zone_device *tz, int trip,
struct thermal_cooling_device *cdev,
- unsigned long upper, unsigned long lower)
+ unsigned long upper, unsigned long lower,
+ unsigned int weight)
{ return -ENODEV; }
static inline int thermal_zone_unbind_cooling_device(
struct thermal_zone_device *tz, int trip,
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 5b04b0a..5e31f1b 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -607,7 +607,7 @@
/* tty_audit.c */
#ifdef CONFIG_AUDIT
-extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
@@ -615,8 +615,8 @@
extern void tty_audit_push(struct tty_struct *tty);
extern int tty_audit_push_current(void);
#else
-static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size, unsigned icanon)
+static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
+ size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
diff --git a/include/linux/types.h b/include/linux/types.h
index 70d8500..70dd3df 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -35,7 +35,7 @@
typedef unsigned long uintptr_t;
-#ifdef CONFIG_UID16
+#ifdef CONFIG_HAVE_UID16
/* This is defined by include/asm-{arch}/posix_types.h */
typedef __kernel_old_uid_t old_uid_t;
typedef __kernel_old_gid_t old_gid_t;
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index aaf9700..fb961a5 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -167,7 +167,8 @@
static inline u32 rt6_get_cookie(const struct rt6_info *rt)
{
- if (rt->rt6i_flags & RTF_PCPU || unlikely(rt->dst.flags & DST_NOCACHE))
+ if (rt->rt6i_flags & RTF_PCPU ||
+ (unlikely(rt->dst.flags & DST_NOCACHE) && rt->dst.from))
rt = (struct rt6_info *)(rt->dst.from);
return rt->rt6i_node ? rt->rt6i_node->fn_sernum : 0;
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index aaee6fa..ff788b6 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -90,11 +90,12 @@
err = ip6_local_out(dev_net(skb_dst(skb)->dev), sk, skb);
if (net_xmit_eval(err) == 0) {
- struct pcpu_sw_netstats *tstats = this_cpu_ptr(dev->tstats);
+ struct pcpu_sw_netstats *tstats = get_cpu_ptr(dev->tstats);
u64_stats_update_begin(&tstats->syncp);
tstats->tx_bytes += pkt_len;
tstats->tx_packets++;
u64_stats_update_end(&tstats->syncp);
+ put_cpu_ptr(tstats);
} else {
stats->tx_errors++;
stats->tx_aborted_errors++;
diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
index f6dafec..62a750a 100644
--- a/include/net/ip_tunnels.h
+++ b/include/net/ip_tunnels.h
@@ -287,12 +287,13 @@
struct pcpu_sw_netstats __percpu *stats)
{
if (err > 0) {
- struct pcpu_sw_netstats *tstats = this_cpu_ptr(stats);
+ struct pcpu_sw_netstats *tstats = get_cpu_ptr(stats);
u64_stats_update_begin(&tstats->syncp);
tstats->tx_bytes += err;
tstats->tx_packets++;
u64_stats_update_end(&tstats->syncp);
+ put_cpu_ptr(tstats);
} else if (err < 0) {
err_stats->tx_errors++;
err_stats->tx_aborted_errors++;
diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h
index c9149cc..4bd7508 100644
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -618,6 +618,8 @@
void (*eval)(const struct nft_expr *expr,
struct nft_regs *regs,
const struct nft_pktinfo *pkt);
+ int (*clone)(struct nft_expr *dst,
+ const struct nft_expr *src);
unsigned int size;
int (*init)(const struct nft_ctx *ctx,
@@ -660,10 +662,20 @@
int nft_expr_dump(struct sk_buff *skb, unsigned int attr,
const struct nft_expr *expr);
-static inline void nft_expr_clone(struct nft_expr *dst, struct nft_expr *src)
+static inline int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src)
{
+ int err;
+
__module_get(src->ops->type->owner);
- memcpy(dst, src, src->ops->size);
+ if (src->ops->clone) {
+ dst->ops = src->ops;
+ err = src->ops->clone(dst, src);
+ if (err < 0)
+ return err;
+ } else {
+ memcpy(dst, src, src->ops->size);
+ }
+ return 0;
}
/**
diff --git a/include/net/sock.h b/include/net/sock.h
index bbf7c2c..7f89e4b 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2226,6 +2226,31 @@
return (1 << sk->sk_state) & (TCPF_LISTEN | TCPF_NEW_SYN_RECV);
}
+/**
+ * sk_state_load - read sk->sk_state for lockless contexts
+ * @sk: socket pointer
+ *
+ * Paired with sk_state_store(). Used in places we do not hold socket lock :
+ * tcp_diag_get_info(), tcp_get_info(), tcp_poll(), get_tcp4_sock() ...
+ */
+static inline int sk_state_load(const struct sock *sk)
+{
+ return smp_load_acquire(&sk->sk_state);
+}
+
+/**
+ * sk_state_store - update sk->sk_state
+ * @sk: socket pointer
+ * @newstate: new state
+ *
+ * Paired with sk_state_load(). Should be used in contexts where
+ * state change might impact lockless readers.
+ */
+static inline void sk_state_store(struct sock *sk, int newstate)
+{
+ smp_store_release(&sk->sk_state, newstate);
+}
+
void sock_enable_timestamp(struct sock *sk, int flag);
int sock_get_timestamp(struct sock *, struct timeval __user *);
int sock_get_timestampns(struct sock *, struct timespec __user *);
diff --git a/include/net/switchdev.h b/include/net/switchdev.h
index bc865e2..1d22ce9 100644
--- a/include/net/switchdev.h
+++ b/include/net/switchdev.h
@@ -323,7 +323,7 @@
struct net_device *filter_dev,
int idx)
{
- return -EOPNOTSUPP;
+ return idx;
}
static inline void switchdev_port_fwd_mark_set(struct net_device *dev,
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 0a2c740..aabf0ac 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -474,7 +474,7 @@
struct completion cmd_wait_comp;
const struct target_core_fabric_ops *se_tfo;
sense_reason_t (*execute_cmd)(struct se_cmd *);
- sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool);
+ sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool, int *);
void *protocol_data;
unsigned char *t_task_cdb;
diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h
index 654bae3..5e62961 100644
--- a/include/uapi/linux/nfs.h
+++ b/include/uapi/linux/nfs.h
@@ -33,17 +33,6 @@
#define NFS_PIPE_DIRNAME "nfs"
-/* NFS ioctls */
-/* Let's follow btrfs lead on CLONE to avoid messing userspace */
-#define NFS_IOC_CLONE _IOW(0x94, 9, int)
-#define NFS_IOC_CLONE_RANGE _IOW(0x94, 13, int)
-
-struct nfs_ioctl_clone_range_args {
- __s64 src_fd;
- __u64 src_off, count;
- __u64 dst_off;
-};
-
/*
* NFS stats. The good thing with these values is that NFSv3 errors are
* a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c
index 6e53441..db545cb 100644
--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -294,6 +294,12 @@
for (reloc = obj->relocs; reloc->name; reloc++) {
if (!klp_is_module(obj)) {
+
+#if defined(CONFIG_RANDOMIZE_BASE)
+ /* If KASLR has been enabled, adjust old value accordingly */
+ if (kaslr_enabled())
+ reloc->val += kaslr_offset();
+#endif
ret = klp_verify_vmlinux_symbol(reloc->name,
reloc->val);
if (ret)
diff --git a/kernel/panic.c b/kernel/panic.c
index 4579dbb..4b150bc 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -152,8 +152,11 @@
* We may have ended up stopping the CPU holding the lock (in
* smp_send_stop()) while still having some valuable data in the console
* buffer. Try to acquire the lock then release it regardless of the
- * result. The release will also print the buffers out.
+ * result. The release will also print the buffers out. Locks debug
+ * should be disabled to avoid reporting bad unlock balance when
+ * panic() is not being callled from OOPS.
*/
+ debug_locks_off();
console_trylock();
console_unlock();
diff --git a/kernel/pid.c b/kernel/pid.c
index ca36879..78b3d9f 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -467,7 +467,7 @@
rcu_read_lock();
if (type != PIDTYPE_PID)
task = task->group_leader;
- pid = get_pid(task->pids[type].pid);
+ pid = get_pid(rcu_dereference(task->pids[type].pid));
rcu_read_unlock();
return pid;
}
@@ -528,7 +528,7 @@
if (likely(pid_alive(task))) {
if (type != PIDTYPE_PID)
task = task->group_leader;
- nr = pid_nr_ns(task->pids[type].pid, ns);
+ nr = pid_nr_ns(rcu_dereference(task->pids[type].pid), ns);
}
rcu_read_unlock();
diff --git a/kernel/signal.c b/kernel/signal.c
index c0b01fe..f3f1f7a 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -3503,7 +3503,7 @@
#endif
-int sigsuspend(sigset_t *set)
+static int sigsuspend(sigset_t *set)
{
current->saved_sigmask = current->blocked;
set_current_blocked(set);
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index c29ddeb..62fe06b 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2009,7 +2009,7 @@
/*
* Be somewhat over-protective like KSM for now!
*/
- if (*vm_flags & (VM_HUGEPAGE | VM_NO_THP))
+ if (*vm_flags & VM_NO_THP)
return -EINVAL;
*vm_flags &= ~VM_NOHUGEPAGE;
*vm_flags |= VM_HUGEPAGE;
@@ -2025,7 +2025,7 @@
/*
* Be somewhat over-protective like KSM for now!
*/
- if (*vm_flags & (VM_NOHUGEPAGE | VM_NO_THP))
+ if (*vm_flags & VM_NO_THP)
return -EINVAL;
*vm_flags &= ~VM_HUGEPAGE;
*vm_flags |= VM_NOHUGEPAGE;
diff --git a/mm/kasan/kasan.c b/mm/kasan/kasan.c
index d41b21b..bc0a8d8 100644
--- a/mm/kasan/kasan.c
+++ b/mm/kasan/kasan.c
@@ -19,6 +19,7 @@
#include <linux/export.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/kmemleak.h>
#include <linux/memblock.h>
#include <linux/memory.h>
#include <linux/mm.h>
@@ -444,6 +445,7 @@
if (ret) {
find_vm_area(addr)->flags |= VM_KASAN;
+ kmemleak_ignore(ret);
return 0;
}
diff --git a/mm/memory.c b/mm/memory.c
index deb679c..c387430 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3015,9 +3015,9 @@
} else {
/*
* The fault handler has no page to lock, so it holds
- * i_mmap_lock for write to protect against truncate.
+ * i_mmap_lock for read to protect against truncate.
*/
- i_mmap_unlock_write(vma->vm_file->f_mapping);
+ i_mmap_unlock_read(vma->vm_file->f_mapping);
}
goto uncharge_out;
}
@@ -3031,9 +3031,9 @@
} else {
/*
* The fault handler has no page to lock, so it holds
- * i_mmap_lock for write to protect against truncate.
+ * i_mmap_lock for read to protect against truncate.
*/
- i_mmap_unlock_write(vma->vm_file->f_mapping);
+ i_mmap_unlock_read(vma->vm_file->f_mapping);
}
return ret;
uncharge_out:
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 2c90357..3e4d654 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1542,7 +1542,9 @@
for (;;) {
unsigned long now = jiffies;
unsigned long dirty, thresh, bg_thresh;
- unsigned long m_dirty, m_thresh, m_bg_thresh;
+ unsigned long m_dirty = 0; /* stop bogus uninit warnings */
+ unsigned long m_thresh = 0;
+ unsigned long m_bg_thresh = 0;
/*
* Unstable writes are a feature of certain networked
diff --git a/mm/slab.c b/mm/slab.c
index e0819fa..4765c97 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3419,7 +3419,7 @@
}
EXPORT_SYMBOL(kmem_cache_free_bulk);
-bool kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
void **p)
{
return __kmem_cache_alloc_bulk(s, flags, size, p);
diff --git a/mm/slab.h b/mm/slab.h
index 27492eb..7b60871 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -170,7 +170,7 @@
* may be allocated or freed using these operations.
*/
void __kmem_cache_free_bulk(struct kmem_cache *, size_t, void **);
-bool __kmem_cache_alloc_bulk(struct kmem_cache *, gfp_t, size_t, void **);
+int __kmem_cache_alloc_bulk(struct kmem_cache *, gfp_t, size_t, void **);
#ifdef CONFIG_MEMCG_KMEM
/*
diff --git a/mm/slab_common.c b/mm/slab_common.c
index d88e97c..3c6a86b 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -112,7 +112,7 @@
kmem_cache_free(s, p[i]);
}
-bool __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t nr,
+int __kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t nr,
void **p)
{
size_t i;
@@ -121,10 +121,10 @@
void *x = p[i] = kmem_cache_alloc(s, flags);
if (!x) {
__kmem_cache_free_bulk(s, i, p);
- return false;
+ return 0;
}
}
- return true;
+ return i;
}
#ifdef CONFIG_MEMCG_KMEM
diff --git a/mm/slob.c b/mm/slob.c
index 0d7e5df..17e8f8c 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -617,7 +617,7 @@
}
EXPORT_SYMBOL(kmem_cache_free_bulk);
-bool kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
void **p)
{
return __kmem_cache_alloc_bulk(s, flags, size, p);
diff --git a/mm/slub.c b/mm/slub.c
index 7cb4bf9..4699751 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1065,11 +1065,15 @@
return 0;
}
+/* Supports checking bulk free of a constructed freelist */
static noinline struct kmem_cache_node *free_debug_processing(
- struct kmem_cache *s, struct page *page, void *object,
+ struct kmem_cache *s, struct page *page,
+ void *head, void *tail, int bulk_cnt,
unsigned long addr, unsigned long *flags)
{
struct kmem_cache_node *n = get_node(s, page_to_nid(page));
+ void *object = head;
+ int cnt = 0;
spin_lock_irqsave(&n->list_lock, *flags);
slab_lock(page);
@@ -1077,6 +1081,9 @@
if (!check_slab(s, page))
goto fail;
+next_object:
+ cnt++;
+
if (!check_valid_pointer(s, page, object)) {
slab_err(s, page, "Invalid object pointer 0x%p", object);
goto fail;
@@ -1107,8 +1114,19 @@
if (s->flags & SLAB_STORE_USER)
set_track(s, object, TRACK_FREE, addr);
trace(s, page, object, 0);
+ /* Freepointer not overwritten by init_object(), SLAB_POISON moved it */
init_object(s, object, SLUB_RED_INACTIVE);
+
+ /* Reached end of constructed freelist yet? */
+ if (object != tail) {
+ object = get_freepointer(s, object);
+ goto next_object;
+ }
out:
+ if (cnt != bulk_cnt)
+ slab_err(s, page, "Bulk freelist count(%d) invalid(%d)\n",
+ bulk_cnt, cnt);
+
slab_unlock(page);
/*
* Keep node_lock to preserve integrity
@@ -1204,7 +1222,7 @@
return flags;
}
-#else
+#else /* !CONFIG_SLUB_DEBUG */
static inline void setup_object_debug(struct kmem_cache *s,
struct page *page, void *object) {}
@@ -1212,7 +1230,8 @@
struct page *page, void *object, unsigned long addr) { return 0; }
static inline struct kmem_cache_node *free_debug_processing(
- struct kmem_cache *s, struct page *page, void *object,
+ struct kmem_cache *s, struct page *page,
+ void *head, void *tail, int bulk_cnt,
unsigned long addr, unsigned long *flags) { return NULL; }
static inline int slab_pad_check(struct kmem_cache *s, struct page *page)
@@ -1273,14 +1292,21 @@
return memcg_kmem_get_cache(s, flags);
}
-static inline void slab_post_alloc_hook(struct kmem_cache *s,
- gfp_t flags, void *object)
+static inline void slab_post_alloc_hook(struct kmem_cache *s, gfp_t flags,
+ size_t size, void **p)
{
+ size_t i;
+
flags &= gfp_allowed_mask;
- kmemcheck_slab_alloc(s, flags, object, slab_ksize(s));
- kmemleak_alloc_recursive(object, s->object_size, 1, s->flags, flags);
+ for (i = 0; i < size; i++) {
+ void *object = p[i];
+
+ kmemcheck_slab_alloc(s, flags, object, slab_ksize(s));
+ kmemleak_alloc_recursive(object, s->object_size, 1,
+ s->flags, flags);
+ kasan_slab_alloc(s, object);
+ }
memcg_kmem_put_cache(s);
- kasan_slab_alloc(s, object);
}
static inline void slab_free_hook(struct kmem_cache *s, void *x)
@@ -1308,6 +1334,29 @@
kasan_slab_free(s, x);
}
+static inline void slab_free_freelist_hook(struct kmem_cache *s,
+ void *head, void *tail)
+{
+/*
+ * Compiler cannot detect this function can be removed if slab_free_hook()
+ * evaluates to nothing. Thus, catch all relevant config debug options here.
+ */
+#if defined(CONFIG_KMEMCHECK) || \
+ defined(CONFIG_LOCKDEP) || \
+ defined(CONFIG_DEBUG_KMEMLEAK) || \
+ defined(CONFIG_DEBUG_OBJECTS_FREE) || \
+ defined(CONFIG_KASAN)
+
+ void *object = head;
+ void *tail_obj = tail ? : head;
+
+ do {
+ slab_free_hook(s, object);
+ } while ((object != tail_obj) &&
+ (object = get_freepointer(s, object)));
+#endif
+}
+
static void setup_object(struct kmem_cache *s, struct page *page,
void *object)
{
@@ -2295,23 +2344,15 @@
* And if we were unable to get a new slab from the partial slab lists then
* we need to allocate a new slab. This is the slowest path since it involves
* a call to the page allocator and the setup of a new slab.
+ *
+ * Version of __slab_alloc to use when we know that interrupts are
+ * already disabled (which is the case for bulk allocation).
*/
-static void *__slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
+static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
unsigned long addr, struct kmem_cache_cpu *c)
{
void *freelist;
struct page *page;
- unsigned long flags;
-
- local_irq_save(flags);
-#ifdef CONFIG_PREEMPT
- /*
- * We may have been preempted and rescheduled on a different
- * cpu before disabling interrupts. Need to reload cpu area
- * pointer.
- */
- c = this_cpu_ptr(s->cpu_slab);
-#endif
page = c->page;
if (!page)
@@ -2369,7 +2410,6 @@
VM_BUG_ON(!c->page->frozen);
c->freelist = get_freepointer(s, freelist);
c->tid = next_tid(c->tid);
- local_irq_restore(flags);
return freelist;
new_slab:
@@ -2386,7 +2426,6 @@
if (unlikely(!freelist)) {
slab_out_of_memory(s, gfpflags, node);
- local_irq_restore(flags);
return NULL;
}
@@ -2402,11 +2441,35 @@
deactivate_slab(s, page, get_freepointer(s, freelist));
c->page = NULL;
c->freelist = NULL;
- local_irq_restore(flags);
return freelist;
}
/*
+ * Another one that disabled interrupt and compensates for possible
+ * cpu changes by refetching the per cpu area pointer.
+ */
+static void *__slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
+ unsigned long addr, struct kmem_cache_cpu *c)
+{
+ void *p;
+ unsigned long flags;
+
+ local_irq_save(flags);
+#ifdef CONFIG_PREEMPT
+ /*
+ * We may have been preempted and rescheduled on a different
+ * cpu before disabling interrupts. Need to reload cpu area
+ * pointer.
+ */
+ c = this_cpu_ptr(s->cpu_slab);
+#endif
+
+ p = ___slab_alloc(s, gfpflags, node, addr, c);
+ local_irq_restore(flags);
+ return p;
+}
+
+/*
* Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc)
* have the fastpath folded into their functions. So no function call
* overhead for requests that can be satisfied on the fastpath.
@@ -2419,7 +2482,7 @@
static __always_inline void *slab_alloc_node(struct kmem_cache *s,
gfp_t gfpflags, int node, unsigned long addr)
{
- void **object;
+ void *object;
struct kmem_cache_cpu *c;
struct page *page;
unsigned long tid;
@@ -2498,7 +2561,7 @@
if (unlikely(gfpflags & __GFP_ZERO) && object)
memset(object, 0, s->object_size);
- slab_post_alloc_hook(s, gfpflags, object);
+ slab_post_alloc_hook(s, gfpflags, 1, &object);
return object;
}
@@ -2569,10 +2632,11 @@
* handling required then we can return immediately.
*/
static void __slab_free(struct kmem_cache *s, struct page *page,
- void *x, unsigned long addr)
+ void *head, void *tail, int cnt,
+ unsigned long addr)
+
{
void *prior;
- void **object = (void *)x;
int was_frozen;
struct page new;
unsigned long counters;
@@ -2582,7 +2646,8 @@
stat(s, FREE_SLOWPATH);
if (kmem_cache_debug(s) &&
- !(n = free_debug_processing(s, page, x, addr, &flags)))
+ !(n = free_debug_processing(s, page, head, tail, cnt,
+ addr, &flags)))
return;
do {
@@ -2592,10 +2657,10 @@
}
prior = page->freelist;
counters = page->counters;
- set_freepointer(s, object, prior);
+ set_freepointer(s, tail, prior);
new.counters = counters;
was_frozen = new.frozen;
- new.inuse--;
+ new.inuse -= cnt;
if ((!new.inuse || !prior) && !was_frozen) {
if (kmem_cache_has_cpu_partial(s) && !prior) {
@@ -2626,7 +2691,7 @@
} while (!cmpxchg_double_slab(s, page,
prior, counters,
- object, new.counters,
+ head, new.counters,
"__slab_free"));
if (likely(!n)) {
@@ -2691,15 +2756,20 @@
*
* If fastpath is not possible then fall back to __slab_free where we deal
* with all sorts of special processing.
+ *
+ * Bulk free of a freelist with several objects (all pointing to the
+ * same page) possible by specifying head and tail ptr, plus objects
+ * count (cnt). Bulk free indicated by tail pointer being set.
*/
-static __always_inline void slab_free(struct kmem_cache *s,
- struct page *page, void *x, unsigned long addr)
+static __always_inline void slab_free(struct kmem_cache *s, struct page *page,
+ void *head, void *tail, int cnt,
+ unsigned long addr)
{
- void **object = (void *)x;
+ void *tail_obj = tail ? : head;
struct kmem_cache_cpu *c;
unsigned long tid;
- slab_free_hook(s, x);
+ slab_free_freelist_hook(s, head, tail);
redo:
/*
@@ -2718,19 +2788,19 @@
barrier();
if (likely(page == c->page)) {
- set_freepointer(s, object, c->freelist);
+ set_freepointer(s, tail_obj, c->freelist);
if (unlikely(!this_cpu_cmpxchg_double(
s->cpu_slab->freelist, s->cpu_slab->tid,
c->freelist, tid,
- object, next_tid(tid)))) {
+ head, next_tid(tid)))) {
note_cmpxchg_failure("slab_free", s, tid);
goto redo;
}
stat(s, FREE_FASTPATH);
} else
- __slab_free(s, page, x, addr);
+ __slab_free(s, page, head, tail_obj, cnt, addr);
}
@@ -2739,59 +2809,116 @@
s = cache_from_obj(s, x);
if (!s)
return;
- slab_free(s, virt_to_head_page(x), x, _RET_IP_);
+ slab_free(s, virt_to_head_page(x), x, NULL, 1, _RET_IP_);
trace_kmem_cache_free(_RET_IP_, x);
}
EXPORT_SYMBOL(kmem_cache_free);
-/* Note that interrupts must be enabled when calling this function. */
-void kmem_cache_free_bulk(struct kmem_cache *s, size_t size, void **p)
-{
- struct kmem_cache_cpu *c;
+struct detached_freelist {
struct page *page;
- int i;
+ void *tail;
+ void *freelist;
+ int cnt;
+};
- local_irq_disable();
- c = this_cpu_ptr(s->cpu_slab);
+/*
+ * This function progressively scans the array with free objects (with
+ * a limited look ahead) and extract objects belonging to the same
+ * page. It builds a detached freelist directly within the given
+ * page/objects. This can happen without any need for
+ * synchronization, because the objects are owned by running process.
+ * The freelist is build up as a single linked list in the objects.
+ * The idea is, that this detached freelist can then be bulk
+ * transferred to the real freelist(s), but only requiring a single
+ * synchronization primitive. Look ahead in the array is limited due
+ * to performance reasons.
+ */
+static int build_detached_freelist(struct kmem_cache *s, size_t size,
+ void **p, struct detached_freelist *df)
+{
+ size_t first_skipped_index = 0;
+ int lookahead = 3;
+ void *object;
- for (i = 0; i < size; i++) {
- void *object = p[i];
+ /* Always re-init detached_freelist */
+ df->page = NULL;
- BUG_ON(!object);
- /* kmem cache debug support */
- s = cache_from_obj(s, object);
- if (unlikely(!s))
- goto exit;
- slab_free_hook(s, object);
+ do {
+ object = p[--size];
+ } while (!object && size);
- page = virt_to_head_page(object);
+ if (!object)
+ return 0;
- if (c->page == page) {
- /* Fastpath: local CPU free */
- set_freepointer(s, object, c->freelist);
- c->freelist = object;
- } else {
- c->tid = next_tid(c->tid);
- local_irq_enable();
- /* Slowpath: overhead locked cmpxchg_double_slab */
- __slab_free(s, page, object, _RET_IP_);
- local_irq_disable();
- c = this_cpu_ptr(s->cpu_slab);
+ /* Start new detached freelist */
+ set_freepointer(s, object, NULL);
+ df->page = virt_to_head_page(object);
+ df->tail = object;
+ df->freelist = object;
+ p[size] = NULL; /* mark object processed */
+ df->cnt = 1;
+
+ while (size) {
+ object = p[--size];
+ if (!object)
+ continue; /* Skip processed objects */
+
+ /* df->page is always set at this point */
+ if (df->page == virt_to_head_page(object)) {
+ /* Opportunity build freelist */
+ set_freepointer(s, object, df->freelist);
+ df->freelist = object;
+ df->cnt++;
+ p[size] = NULL; /* mark object processed */
+
+ continue;
}
+
+ /* Limit look ahead search */
+ if (!--lookahead)
+ break;
+
+ if (!first_skipped_index)
+ first_skipped_index = size + 1;
}
-exit:
- c->tid = next_tid(c->tid);
- local_irq_enable();
+
+ return first_skipped_index;
+}
+
+
+/* Note that interrupts must be enabled when calling this function. */
+void kmem_cache_free_bulk(struct kmem_cache *orig_s, size_t size, void **p)
+{
+ if (WARN_ON(!size))
+ return;
+
+ do {
+ struct detached_freelist df;
+ struct kmem_cache *s;
+
+ /* Support for memcg */
+ s = cache_from_obj(orig_s, p[size - 1]);
+
+ size = build_detached_freelist(s, size, p, &df);
+ if (unlikely(!df.page))
+ continue;
+
+ slab_free(s, df.page, df.freelist, df.tail, df.cnt, _RET_IP_);
+ } while (likely(size));
}
EXPORT_SYMBOL(kmem_cache_free_bulk);
/* Note that interrupts must be enabled when calling this function. */
-bool kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
- void **p)
+int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
+ void **p)
{
struct kmem_cache_cpu *c;
int i;
+ /* memcg and kmem_cache debug support */
+ s = slab_pre_alloc_hook(s, flags);
+ if (unlikely(!s))
+ return false;
/*
* Drain objects in the per cpu slab, while disabling local
* IRQs, which protects against PREEMPT and interrupts
@@ -2804,36 +2931,20 @@
void *object = c->freelist;
if (unlikely(!object)) {
- local_irq_enable();
/*
* Invoking slow path likely have side-effect
* of re-populating per CPU c->freelist
*/
- p[i] = __slab_alloc(s, flags, NUMA_NO_NODE,
+ p[i] = ___slab_alloc(s, flags, NUMA_NO_NODE,
_RET_IP_, c);
- if (unlikely(!p[i])) {
- __kmem_cache_free_bulk(s, i, p);
- return false;
- }
- local_irq_disable();
+ if (unlikely(!p[i]))
+ goto error;
+
c = this_cpu_ptr(s->cpu_slab);
continue; /* goto for-loop */
}
-
- /* kmem_cache debug support */
- s = slab_pre_alloc_hook(s, flags);
- if (unlikely(!s)) {
- __kmem_cache_free_bulk(s, i, p);
- c->tid = next_tid(c->tid);
- local_irq_enable();
- return false;
- }
-
c->freelist = get_freepointer(s, object);
p[i] = object;
-
- /* kmem_cache debug support */
- slab_post_alloc_hook(s, flags, object);
}
c->tid = next_tid(c->tid);
local_irq_enable();
@@ -2846,7 +2957,14 @@
memset(p[j], 0, s->object_size);
}
- return true;
+ /* memcg and kmem_cache debug support */
+ slab_post_alloc_hook(s, flags, size, p);
+ return i;
+error:
+ local_irq_enable();
+ slab_post_alloc_hook(s, flags, i, p);
+ __kmem_cache_free_bulk(s, i, p);
+ return 0;
}
EXPORT_SYMBOL(kmem_cache_alloc_bulk);
@@ -3511,7 +3629,7 @@
__free_kmem_pages(page, compound_order(page));
return;
}
- slab_free(page->slab_cache, page, object, _RET_IP_);
+ slab_free(page->slab_cache, page, object, NULL, 1, _RET_IP_);
}
EXPORT_SYMBOL(kfree);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index d045634..8e3c9c5 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1443,7 +1443,6 @@
vmap_debug_free_range(va->va_start, va->va_end);
kasan_free_shadow(vm);
free_unmap_vmap_area(va);
- vm->size -= PAGE_SIZE;
return vm;
}
@@ -1468,8 +1467,8 @@
return;
}
- debug_check_no_locks_freed(addr, area->size);
- debug_check_no_obj_freed(addr, area->size);
+ debug_check_no_locks_freed(addr, get_vm_area_size(area));
+ debug_check_no_obj_freed(addr, get_vm_area_size(area));
if (deallocate_pages) {
int i;
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 496b275..e2ed698 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -30,7 +30,9 @@
skb->pkt_type = PACKET_HOST;
}
- if (!(vlan_dev_priv(vlan_dev)->flags & VLAN_FLAG_REORDER_HDR)) {
+ if (!(vlan_dev_priv(vlan_dev)->flags & VLAN_FLAG_REORDER_HDR) &&
+ !netif_is_macvlan_port(vlan_dev) &&
+ !netif_is_bridge_port(vlan_dev)) {
unsigned int offset = skb->data - skb_mac_header(skb);
/*
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index f7e8dee..5f3f645 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -48,7 +48,7 @@
p->state = state;
err = switchdev_port_attr_set(p->dev, &attr);
- if (err)
+ if (err && err != -EOPNOTSUPP)
br_warn(p->br, "error setting offload STP state on port %u(%s)\n",
(unsigned int) p->port_no, p->dev->name);
}
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index fa53d7a..5396ff08 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -50,7 +50,7 @@
p->config_pending = 0;
err = switchdev_port_attr_set(p->dev, &attr);
- if (err)
+ if (err && err != -EOPNOTSUPP)
netdev_err(p->dev, "failed to set HW ageing time\n");
}
diff --git a/net/core/dev.c b/net/core/dev.c
index ab9b8d0..ae00b89 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2403,17 +2403,20 @@
{
static const netdev_features_t null_features = 0;
struct net_device *dev = skb->dev;
- const char *driver = "";
+ const char *name = "";
if (!net_ratelimit())
return;
- if (dev && dev->dev.parent)
- driver = dev_driver_string(dev->dev.parent);
-
+ if (dev) {
+ if (dev->dev.parent)
+ name = dev_driver_string(dev->dev.parent);
+ else
+ name = netdev_name(dev);
+ }
WARN(1, "%s: caps=(%pNF, %pNF) len=%d data_len=%d gso_size=%d "
"gso_type=%d ip_summed=%d\n",
- driver, dev ? &dev->features : &null_features,
+ name, dev ? &dev->features : &null_features,
skb->sk ? &skb->sk->sk_route_caps : &null_features,
skb->len, skb->data_len, skb_shinfo(skb)->gso_size,
skb_shinfo(skb)->gso_type, skb->ip_summed);
@@ -6426,11 +6429,16 @@
if (dev->netdev_ops->ndo_set_features)
err = dev->netdev_ops->ndo_set_features(dev, features);
+ else
+ err = 0;
if (unlikely(err < 0)) {
netdev_err(dev,
"set_features() failed (%d); wanted %pNF, left %pNF\n",
err, &features, &dev->features);
+ /* return non-0 since some features might have changed and
+ * it's better to fire a spurious notification than miss it
+ */
return -1;
}
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 1aa8437..e6af42d 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -857,7 +857,7 @@
struct sk_buff *skb = skb_peek_tail(&neigh->arp_queue);
/* keep skb alive even if arp_queue overflows */
if (skb)
- skb = skb_copy(skb, GFP_ATOMIC);
+ skb = skb_clone(skb, GFP_ATOMIC);
write_unlock(&neigh->lock);
neigh->ops->solicit(neigh, skb);
atomic_inc(&neigh->probes);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 504bd17..34ba7a0 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -1045,15 +1045,156 @@
return 0;
}
+static noinline_for_stack int rtnl_fill_stats(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ const struct rtnl_link_stats64 *stats;
+ struct rtnl_link_stats64 temp;
+ struct nlattr *attr;
+
+ stats = dev_get_stats(dev, &temp);
+
+ attr = nla_reserve(skb, IFLA_STATS,
+ sizeof(struct rtnl_link_stats));
+ if (!attr)
+ return -EMSGSIZE;
+
+ copy_rtnl_link_stats(nla_data(attr), stats);
+
+ attr = nla_reserve(skb, IFLA_STATS64,
+ sizeof(struct rtnl_link_stats64));
+ if (!attr)
+ return -EMSGSIZE;
+
+ copy_rtnl_link_stats64(nla_data(attr), stats);
+
+ return 0;
+}
+
+static noinline_for_stack int rtnl_fill_vfinfo(struct sk_buff *skb,
+ struct net_device *dev,
+ int vfs_num,
+ struct nlattr *vfinfo)
+{
+ struct ifla_vf_rss_query_en vf_rss_query_en;
+ struct ifla_vf_link_state vf_linkstate;
+ struct ifla_vf_spoofchk vf_spoofchk;
+ struct ifla_vf_tx_rate vf_tx_rate;
+ struct ifla_vf_stats vf_stats;
+ struct ifla_vf_trust vf_trust;
+ struct ifla_vf_vlan vf_vlan;
+ struct ifla_vf_rate vf_rate;
+ struct nlattr *vf, *vfstats;
+ struct ifla_vf_mac vf_mac;
+ struct ifla_vf_info ivi;
+
+ /* Not all SR-IOV capable drivers support the
+ * spoofcheck and "RSS query enable" query. Preset to
+ * -1 so the user space tool can detect that the driver
+ * didn't report anything.
+ */
+ ivi.spoofchk = -1;
+ ivi.rss_query_en = -1;
+ ivi.trusted = -1;
+ memset(ivi.mac, 0, sizeof(ivi.mac));
+ /* The default value for VF link state is "auto"
+ * IFLA_VF_LINK_STATE_AUTO which equals zero
+ */
+ ivi.linkstate = 0;
+ if (dev->netdev_ops->ndo_get_vf_config(dev, vfs_num, &ivi))
+ return 0;
+
+ vf_mac.vf =
+ vf_vlan.vf =
+ vf_rate.vf =
+ vf_tx_rate.vf =
+ vf_spoofchk.vf =
+ vf_linkstate.vf =
+ vf_rss_query_en.vf =
+ vf_trust.vf = ivi.vf;
+
+ memcpy(vf_mac.mac, ivi.mac, sizeof(ivi.mac));
+ vf_vlan.vlan = ivi.vlan;
+ vf_vlan.qos = ivi.qos;
+ vf_tx_rate.rate = ivi.max_tx_rate;
+ vf_rate.min_tx_rate = ivi.min_tx_rate;
+ vf_rate.max_tx_rate = ivi.max_tx_rate;
+ vf_spoofchk.setting = ivi.spoofchk;
+ vf_linkstate.link_state = ivi.linkstate;
+ vf_rss_query_en.setting = ivi.rss_query_en;
+ vf_trust.setting = ivi.trusted;
+ vf = nla_nest_start(skb, IFLA_VF_INFO);
+ if (!vf) {
+ nla_nest_cancel(skb, vfinfo);
+ return -EMSGSIZE;
+ }
+ if (nla_put(skb, IFLA_VF_MAC, sizeof(vf_mac), &vf_mac) ||
+ nla_put(skb, IFLA_VF_VLAN, sizeof(vf_vlan), &vf_vlan) ||
+ nla_put(skb, IFLA_VF_RATE, sizeof(vf_rate),
+ &vf_rate) ||
+ nla_put(skb, IFLA_VF_TX_RATE, sizeof(vf_tx_rate),
+ &vf_tx_rate) ||
+ nla_put(skb, IFLA_VF_SPOOFCHK, sizeof(vf_spoofchk),
+ &vf_spoofchk) ||
+ nla_put(skb, IFLA_VF_LINK_STATE, sizeof(vf_linkstate),
+ &vf_linkstate) ||
+ nla_put(skb, IFLA_VF_RSS_QUERY_EN,
+ sizeof(vf_rss_query_en),
+ &vf_rss_query_en) ||
+ nla_put(skb, IFLA_VF_TRUST,
+ sizeof(vf_trust), &vf_trust))
+ return -EMSGSIZE;
+ memset(&vf_stats, 0, sizeof(vf_stats));
+ if (dev->netdev_ops->ndo_get_vf_stats)
+ dev->netdev_ops->ndo_get_vf_stats(dev, vfs_num,
+ &vf_stats);
+ vfstats = nla_nest_start(skb, IFLA_VF_STATS);
+ if (!vfstats) {
+ nla_nest_cancel(skb, vf);
+ nla_nest_cancel(skb, vfinfo);
+ return -EMSGSIZE;
+ }
+ if (nla_put_u64(skb, IFLA_VF_STATS_RX_PACKETS,
+ vf_stats.rx_packets) ||
+ nla_put_u64(skb, IFLA_VF_STATS_TX_PACKETS,
+ vf_stats.tx_packets) ||
+ nla_put_u64(skb, IFLA_VF_STATS_RX_BYTES,
+ vf_stats.rx_bytes) ||
+ nla_put_u64(skb, IFLA_VF_STATS_TX_BYTES,
+ vf_stats.tx_bytes) ||
+ nla_put_u64(skb, IFLA_VF_STATS_BROADCAST,
+ vf_stats.broadcast) ||
+ nla_put_u64(skb, IFLA_VF_STATS_MULTICAST,
+ vf_stats.multicast))
+ return -EMSGSIZE;
+ nla_nest_end(skb, vfstats);
+ nla_nest_end(skb, vf);
+ return 0;
+}
+
+static int rtnl_fill_link_ifmap(struct sk_buff *skb, struct net_device *dev)
+{
+ struct rtnl_link_ifmap map = {
+ .mem_start = dev->mem_start,
+ .mem_end = dev->mem_end,
+ .base_addr = dev->base_addr,
+ .irq = dev->irq,
+ .dma = dev->dma,
+ .port = dev->if_port,
+ };
+ if (nla_put(skb, IFLA_MAP, sizeof(map), &map))
+ return -EMSGSIZE;
+
+ return 0;
+}
+
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
unsigned int flags, u32 ext_filter_mask)
{
struct ifinfomsg *ifm;
struct nlmsghdr *nlh;
- struct rtnl_link_stats64 temp;
- const struct rtnl_link_stats64 *stats;
- struct nlattr *attr, *af_spec;
+ struct nlattr *af_spec;
struct rtnl_af_ops *af_ops;
struct net_device *upper_dev = netdev_master_upper_dev_get(dev);
@@ -1096,18 +1237,8 @@
nla_put_u8(skb, IFLA_PROTO_DOWN, dev->proto_down))
goto nla_put_failure;
- if (1) {
- struct rtnl_link_ifmap map = {
- .mem_start = dev->mem_start,
- .mem_end = dev->mem_end,
- .base_addr = dev->base_addr,
- .irq = dev->irq,
- .dma = dev->dma,
- .port = dev->if_port,
- };
- if (nla_put(skb, IFLA_MAP, sizeof(map), &map))
- goto nla_put_failure;
- }
+ if (rtnl_fill_link_ifmap(skb, dev))
+ goto nla_put_failure;
if (dev->addr_len) {
if (nla_put(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr) ||
@@ -1124,128 +1255,27 @@
if (rtnl_phys_switch_id_fill(skb, dev))
goto nla_put_failure;
- attr = nla_reserve(skb, IFLA_STATS,
- sizeof(struct rtnl_link_stats));
- if (attr == NULL)
+ if (rtnl_fill_stats(skb, dev))
goto nla_put_failure;
- stats = dev_get_stats(dev, &temp);
- copy_rtnl_link_stats(nla_data(attr), stats);
-
- attr = nla_reserve(skb, IFLA_STATS64,
- sizeof(struct rtnl_link_stats64));
- if (attr == NULL)
- goto nla_put_failure;
- copy_rtnl_link_stats64(nla_data(attr), stats);
-
if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF) &&
nla_put_u32(skb, IFLA_NUM_VF, dev_num_vf(dev->dev.parent)))
goto nla_put_failure;
- if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent
- && (ext_filter_mask & RTEXT_FILTER_VF)) {
+ if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent &&
+ ext_filter_mask & RTEXT_FILTER_VF) {
int i;
-
- struct nlattr *vfinfo, *vf, *vfstats;
+ struct nlattr *vfinfo;
int num_vfs = dev_num_vf(dev->dev.parent);
vfinfo = nla_nest_start(skb, IFLA_VFINFO_LIST);
if (!vfinfo)
goto nla_put_failure;
for (i = 0; i < num_vfs; i++) {
- struct ifla_vf_info ivi;
- struct ifla_vf_mac vf_mac;
- struct ifla_vf_vlan vf_vlan;
- struct ifla_vf_rate vf_rate;
- struct ifla_vf_tx_rate vf_tx_rate;
- struct ifla_vf_spoofchk vf_spoofchk;
- struct ifla_vf_link_state vf_linkstate;
- struct ifla_vf_rss_query_en vf_rss_query_en;
- struct ifla_vf_stats vf_stats;
- struct ifla_vf_trust vf_trust;
-
- /*
- * Not all SR-IOV capable drivers support the
- * spoofcheck and "RSS query enable" query. Preset to
- * -1 so the user space tool can detect that the driver
- * didn't report anything.
- */
- ivi.spoofchk = -1;
- ivi.rss_query_en = -1;
- ivi.trusted = -1;
- memset(ivi.mac, 0, sizeof(ivi.mac));
- /* The default value for VF link state is "auto"
- * IFLA_VF_LINK_STATE_AUTO which equals zero
- */
- ivi.linkstate = 0;
- if (dev->netdev_ops->ndo_get_vf_config(dev, i, &ivi))
- break;
- vf_mac.vf =
- vf_vlan.vf =
- vf_rate.vf =
- vf_tx_rate.vf =
- vf_spoofchk.vf =
- vf_linkstate.vf =
- vf_rss_query_en.vf =
- vf_trust.vf = ivi.vf;
-
- memcpy(vf_mac.mac, ivi.mac, sizeof(ivi.mac));
- vf_vlan.vlan = ivi.vlan;
- vf_vlan.qos = ivi.qos;
- vf_tx_rate.rate = ivi.max_tx_rate;
- vf_rate.min_tx_rate = ivi.min_tx_rate;
- vf_rate.max_tx_rate = ivi.max_tx_rate;
- vf_spoofchk.setting = ivi.spoofchk;
- vf_linkstate.link_state = ivi.linkstate;
- vf_rss_query_en.setting = ivi.rss_query_en;
- vf_trust.setting = ivi.trusted;
- vf = nla_nest_start(skb, IFLA_VF_INFO);
- if (!vf) {
- nla_nest_cancel(skb, vfinfo);
+ if (rtnl_fill_vfinfo(skb, dev, i, vfinfo))
goto nla_put_failure;
- }
- if (nla_put(skb, IFLA_VF_MAC, sizeof(vf_mac), &vf_mac) ||
- nla_put(skb, IFLA_VF_VLAN, sizeof(vf_vlan), &vf_vlan) ||
- nla_put(skb, IFLA_VF_RATE, sizeof(vf_rate),
- &vf_rate) ||
- nla_put(skb, IFLA_VF_TX_RATE, sizeof(vf_tx_rate),
- &vf_tx_rate) ||
- nla_put(skb, IFLA_VF_SPOOFCHK, sizeof(vf_spoofchk),
- &vf_spoofchk) ||
- nla_put(skb, IFLA_VF_LINK_STATE, sizeof(vf_linkstate),
- &vf_linkstate) ||
- nla_put(skb, IFLA_VF_RSS_QUERY_EN,
- sizeof(vf_rss_query_en),
- &vf_rss_query_en) ||
- nla_put(skb, IFLA_VF_TRUST,
- sizeof(vf_trust), &vf_trust))
- goto nla_put_failure;
- memset(&vf_stats, 0, sizeof(vf_stats));
- if (dev->netdev_ops->ndo_get_vf_stats)
- dev->netdev_ops->ndo_get_vf_stats(dev, i,
- &vf_stats);
- vfstats = nla_nest_start(skb, IFLA_VF_STATS);
- if (!vfstats) {
- nla_nest_cancel(skb, vf);
- nla_nest_cancel(skb, vfinfo);
- goto nla_put_failure;
- }
- if (nla_put_u64(skb, IFLA_VF_STATS_RX_PACKETS,
- vf_stats.rx_packets) ||
- nla_put_u64(skb, IFLA_VF_STATS_TX_PACKETS,
- vf_stats.tx_packets) ||
- nla_put_u64(skb, IFLA_VF_STATS_RX_BYTES,
- vf_stats.rx_bytes) ||
- nla_put_u64(skb, IFLA_VF_STATS_TX_BYTES,
- vf_stats.tx_bytes) ||
- nla_put_u64(skb, IFLA_VF_STATS_BROADCAST,
- vf_stats.broadcast) ||
- nla_put_u64(skb, IFLA_VF_STATS_MULTICAST,
- vf_stats.multicast))
- goto nla_put_failure;
- nla_nest_end(skb, vfstats);
- nla_nest_end(skb, vf);
}
+
nla_nest_end(skb, vfinfo);
}
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index aa41e6d..152b9c7 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4268,7 +4268,8 @@
return NULL;
}
- memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
+ memmove(skb->data - ETH_HLEN, skb->data - skb->mac_len,
+ 2 * ETH_ALEN);
skb->mac_header += VLAN_HLEN;
return skb;
}
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 1feb15f..46b9c88 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -563,7 +563,7 @@
int max_retries, thresh;
u8 defer_accept;
- if (sk_listener->sk_state != TCP_LISTEN)
+ if (sk_state_load(sk_listener) != TCP_LISTEN)
goto drop;
max_retries = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
@@ -749,7 +749,7 @@
* It is OK, because this socket enters to hash table only
* after validation is complete.
*/
- sk->sk_state = TCP_LISTEN;
+ sk_state_store(sk, TCP_LISTEN);
if (!sk->sk_prot->get_port(sk, inet->inet_num)) {
inet->inet_sport = htons(inet->inet_num);
diff --git a/net/ipv4/netfilter/nf_nat_pptp.c b/net/ipv4/netfilter/nf_nat_pptp.c
index 657d230..b3ca21b 100644
--- a/net/ipv4/netfilter/nf_nat_pptp.c
+++ b/net/ipv4/netfilter/nf_nat_pptp.c
@@ -45,7 +45,7 @@
struct net *net = nf_ct_net(ct);
const struct nf_conn *master = ct->master;
struct nf_conntrack_expect *other_exp;
- struct nf_conntrack_tuple t;
+ struct nf_conntrack_tuple t = {};
const struct nf_ct_pptp_master *ct_pptp_info;
const struct nf_nat_pptp *nat_pptp_info;
struct nf_nat_range range;
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 8c0d0bd..63e5be0 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -406,10 +406,12 @@
ip_select_ident(net, skb, NULL);
iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
+ skb->transport_header += iphlen;
+ if (iph->protocol == IPPROTO_ICMP &&
+ length >= iphlen + sizeof(struct icmphdr))
+ icmp_out_count(net, ((struct icmphdr *)
+ skb_transport_header(skb))->type);
}
- if (iph->protocol == IPPROTO_ICMP)
- icmp_out_count(net, ((struct icmphdr *)
- skb_transport_header(skb))->type);
err = NF_HOOK(NFPROTO_IPV4, NF_INET_LOCAL_OUT,
net, sk, skb, NULL, rt->dst.dev,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 0cfa7c0..c172877 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -451,11 +451,14 @@
unsigned int mask;
struct sock *sk = sock->sk;
const struct tcp_sock *tp = tcp_sk(sk);
+ int state;
sock_rps_record_flow(sk);
sock_poll_wait(file, sk_sleep(sk), wait);
- if (sk->sk_state == TCP_LISTEN)
+
+ state = sk_state_load(sk);
+ if (state == TCP_LISTEN)
return inet_csk_listen_poll(sk);
/* Socket is not locked. We are protected from async events
@@ -492,14 +495,14 @@
* NOTE. Check for TCP_CLOSE is added. The goal is to prevent
* blocking on fresh not-connected or disconnected socket. --ANK
*/
- if (sk->sk_shutdown == SHUTDOWN_MASK || sk->sk_state == TCP_CLOSE)
+ if (sk->sk_shutdown == SHUTDOWN_MASK || state == TCP_CLOSE)
mask |= POLLHUP;
if (sk->sk_shutdown & RCV_SHUTDOWN)
mask |= POLLIN | POLLRDNORM | POLLRDHUP;
/* Connected or passive Fast Open socket? */
- if (sk->sk_state != TCP_SYN_SENT &&
- (sk->sk_state != TCP_SYN_RECV || tp->fastopen_rsk)) {
+ if (state != TCP_SYN_SENT &&
+ (state != TCP_SYN_RECV || tp->fastopen_rsk)) {
int target = sock_rcvlowat(sk, 0, INT_MAX);
if (tp->urg_seq == tp->copied_seq &&
@@ -507,9 +510,6 @@
tp->urg_data)
target++;
- /* Potential race condition. If read of tp below will
- * escape above sk->sk_state, we can be illegally awaken
- * in SYN_* states. */
if (tp->rcv_nxt - tp->copied_seq >= target)
mask |= POLLIN | POLLRDNORM;
@@ -1934,7 +1934,7 @@
/* Change state AFTER socket is unhashed to avoid closed
* socket sitting in hash tables.
*/
- sk->sk_state = state;
+ sk_state_store(sk, state);
#ifdef STATE_TRACE
SOCK_DEBUG(sk, "TCP sk=%p, State %s -> %s\n", sk, statename[oldstate], statename[state]);
@@ -2644,7 +2644,8 @@
if (sk->sk_type != SOCK_STREAM)
return;
- info->tcpi_state = sk->sk_state;
+ info->tcpi_state = sk_state_load(sk);
+
info->tcpi_ca_state = icsk->icsk_ca_state;
info->tcpi_retransmits = icsk->icsk_retransmits;
info->tcpi_probes = icsk->icsk_probes_out;
@@ -2672,7 +2673,7 @@
info->tcpi_snd_mss = tp->mss_cache;
info->tcpi_rcv_mss = icsk->icsk_ack.rcv_mss;
- if (sk->sk_state == TCP_LISTEN) {
+ if (info->tcpi_state == TCP_LISTEN) {
info->tcpi_unacked = sk->sk_ack_backlog;
info->tcpi_sacked = sk->sk_max_ack_backlog;
} else {
diff --git a/net/ipv4/tcp_diag.c b/net/ipv4/tcp_diag.c
index 479f349..b316040 100644
--- a/net/ipv4/tcp_diag.c
+++ b/net/ipv4/tcp_diag.c
@@ -21,7 +21,7 @@
{
struct tcp_info *info = _info;
- if (sk->sk_state == TCP_LISTEN) {
+ if (sk_state_load(sk) == TCP_LISTEN) {
r->idiag_rqueue = sk->sk_ack_backlog;
r->idiag_wqueue = sk->sk_max_ack_backlog;
} else if (sk->sk_type == SOCK_STREAM) {
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 950e28c..ba09016 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2158,6 +2158,7 @@
__u16 destp = ntohs(inet->inet_dport);
__u16 srcp = ntohs(inet->inet_sport);
int rx_queue;
+ int state;
if (icsk->icsk_pending == ICSK_TIME_RETRANS ||
icsk->icsk_pending == ICSK_TIME_EARLY_RETRANS ||
@@ -2175,17 +2176,18 @@
timer_expires = jiffies;
}
- if (sk->sk_state == TCP_LISTEN)
+ state = sk_state_load(sk);
+ if (state == TCP_LISTEN)
rx_queue = sk->sk_ack_backlog;
else
- /*
- * because we dont lock socket, we might find a transient negative value
+ /* Because we don't lock the socket,
+ * we might find a transient negative value.
*/
rx_queue = max_t(int, tp->rcv_nxt - tp->copied_seq, 0);
seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX "
"%08X %5u %8d %lu %d %pK %lu %lu %u %u %d",
- i, src, srcp, dest, destp, sk->sk_state,
+ i, src, srcp, dest, destp, state,
tp->write_seq - tp->snd_una,
rx_queue,
timer_active,
@@ -2199,8 +2201,8 @@
jiffies_to_clock_t(icsk->icsk_ack.ato),
(icsk->icsk_ack.quick << 1) | icsk->icsk_ack.pingpong,
tp->snd_cwnd,
- sk->sk_state == TCP_LISTEN ?
- (fastopenq ? fastopenq->max_qlen : 0) :
+ state == TCP_LISTEN ?
+ fastopenq->max_qlen :
(tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh));
}
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 124338a..5ee56d0 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1651,7 +1651,6 @@
if (!err) {
ICMP6MSGOUT_INC_STATS(net, idev, ICMPV6_MLD2_REPORT);
ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
- IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, payload_len);
} else {
IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
}
@@ -2015,7 +2014,6 @@
if (!err) {
ICMP6MSGOUT_INC_STATS(net, idev, type);
ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS);
- IP6_UPD_PO_STATS(net, idev, IPSTATS_MIB_OUTMCAST, full_len);
} else
IP6_INC_STATS(net, idev, IPSTATS_MIB_OUTDISCARDS);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index c8bc9b4..6f01fe1 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -404,6 +404,14 @@
}
}
+static bool __rt6_check_expired(const struct rt6_info *rt)
+{
+ if (rt->rt6i_flags & RTF_EXPIRES)
+ return time_after(jiffies, rt->dst.expires);
+ else
+ return false;
+}
+
static bool rt6_check_expired(const struct rt6_info *rt)
{
if (rt->rt6i_flags & RTF_EXPIRES) {
@@ -1252,7 +1260,8 @@
static struct dst_entry *rt6_dst_from_check(struct rt6_info *rt, u32 cookie)
{
- if (rt->dst.obsolete == DST_OBSOLETE_FORCE_CHK &&
+ if (!__rt6_check_expired(rt) &&
+ rt->dst.obsolete == DST_OBSOLETE_FORCE_CHK &&
rt6_check((struct rt6_info *)(rt->dst.from), cookie))
return &rt->dst;
else
@@ -1272,7 +1281,8 @@
rt6_dst_from_metrics_check(rt);
- if ((rt->rt6i_flags & RTF_PCPU) || unlikely(dst->flags & DST_NOCACHE))
+ if (rt->rt6i_flags & RTF_PCPU ||
+ (unlikely(dst->flags & DST_NOCACHE) && rt->dst.from))
return rt6_dst_from_check(rt, cookie);
else
return rt6_check(rt, cookie);
@@ -1322,6 +1332,12 @@
rt6_update_expires(rt, net->ipv6.sysctl.ip6_rt_mtu_expires);
}
+static bool rt6_cache_allowed_for_pmtu(const struct rt6_info *rt)
+{
+ return !(rt->rt6i_flags & RTF_CACHE) &&
+ (rt->rt6i_flags & RTF_PCPU || rt->rt6i_node);
+}
+
static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk,
const struct ipv6hdr *iph, u32 mtu)
{
@@ -1335,7 +1351,7 @@
if (mtu >= dst_mtu(dst))
return;
- if (rt6->rt6i_flags & RTF_CACHE) {
+ if (!rt6_cache_allowed_for_pmtu(rt6)) {
rt6_do_update_pmtu(rt6, mtu);
} else {
const struct in6_addr *daddr, *saddr;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 5baa8e7..c5429a6 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1690,6 +1690,8 @@
const struct tcp_sock *tp = tcp_sk(sp);
const struct inet_connection_sock *icsk = inet_csk(sp);
const struct fastopen_queue *fastopenq = &icsk->icsk_accept_queue.fastopenq;
+ int rx_queue;
+ int state;
dest = &sp->sk_v6_daddr;
src = &sp->sk_v6_rcv_saddr;
@@ -1710,6 +1712,15 @@
timer_expires = jiffies;
}
+ state = sk_state_load(sp);
+ if (state == TCP_LISTEN)
+ rx_queue = sp->sk_ack_backlog;
+ else
+ /* Because we don't lock the socket,
+ * we might find a transient negative value.
+ */
+ rx_queue = max_t(int, tp->rcv_nxt - tp->copied_seq, 0);
+
seq_printf(seq,
"%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
"%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %lu %lu %u %u %d\n",
@@ -1718,9 +1729,9 @@
src->s6_addr32[2], src->s6_addr32[3], srcp,
dest->s6_addr32[0], dest->s6_addr32[1],
dest->s6_addr32[2], dest->s6_addr32[3], destp,
- sp->sk_state,
- tp->write_seq-tp->snd_una,
- (sp->sk_state == TCP_LISTEN) ? sp->sk_ack_backlog : (tp->rcv_nxt - tp->copied_seq),
+ state,
+ tp->write_seq - tp->snd_una,
+ rx_queue,
timer_active,
jiffies_delta_to_clock_t(timer_expires - jiffies),
icsk->icsk_retransmits,
@@ -1732,7 +1743,7 @@
jiffies_to_clock_t(icsk->icsk_ack.ato),
(icsk->icsk_ack.quick << 1) | icsk->icsk_ack.pingpong,
tp->snd_cwnd,
- sp->sk_state == TCP_LISTEN ?
+ state == TCP_LISTEN ?
fastopenq->max_qlen :
(tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh)
);
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index e22349e..4692782 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -869,7 +869,7 @@
depends on IPV6 || IPV6=n
depends on !NF_CONNTRACK || NF_CONNTRACK
select NF_DUP_IPV4
- select NF_DUP_IPV6 if IP6_NF_IPTABLES
+ select NF_DUP_IPV6 if IP6_NF_IPTABLES != n
---help---
This option adds a "TEE" target with which a packet can be cloned and
this clone be rerouted to another nexthop.
@@ -882,7 +882,7 @@
depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n
depends on IP_NF_MANGLE
select NF_DEFRAG_IPV4
- select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES
+ select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n
help
This option adds a `TPROXY' target, which is somewhat similar to
REDIRECT. It can only be used in the mangle table and is useful
@@ -1375,7 +1375,7 @@
depends on IPV6 || IPV6=n
depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n
select NF_DEFRAG_IPV4
- select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES
+ select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n
help
This option adds a `socket' match, which can be used to match
packets for which a TCP or UDP socket lookup finds a valid socket.
diff --git a/net/netfilter/ipset/ip_set_bitmap_gen.h b/net/netfilter/ipset/ip_set_bitmap_gen.h
index d05e759..b0bc475 100644
--- a/net/netfilter/ipset/ip_set_bitmap_gen.h
+++ b/net/netfilter/ipset/ip_set_bitmap_gen.h
@@ -33,7 +33,7 @@
#define mtype_gc IPSET_TOKEN(MTYPE, _gc)
#define mtype MTYPE
-#define get_ext(set, map, id) ((map)->extensions + (set)->dsize * (id))
+#define get_ext(set, map, id) ((map)->extensions + ((set)->dsize * (id)))
static void
mtype_gc_init(struct ip_set *set, void (*gc)(unsigned long ul_set))
@@ -67,12 +67,9 @@
del_timer_sync(&map->gc);
ip_set_free(map->members);
- if (set->dsize) {
- if (set->extensions & IPSET_EXT_DESTROY)
- mtype_ext_cleanup(set);
- ip_set_free(map->extensions);
- }
- kfree(map);
+ if (set->dsize && set->extensions & IPSET_EXT_DESTROY)
+ mtype_ext_cleanup(set);
+ ip_set_free(map);
set->data = NULL;
}
@@ -92,16 +89,14 @@
{
const struct mtype *map = set->data;
struct nlattr *nested;
+ size_t memsize = sizeof(*map) + map->memsize;
nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
if (!nested)
goto nla_put_failure;
if (mtype_do_head(skb, map) ||
nla_put_net32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1)) ||
- nla_put_net32(skb, IPSET_ATTR_MEMSIZE,
- htonl(sizeof(*map) +
- map->memsize +
- set->dsize * map->elements)))
+ nla_put_net32(skb, IPSET_ATTR_MEMSIZE, htonl(memsize)))
goto nla_put_failure;
if (unlikely(ip_set_put_flags(skb, set)))
goto nla_put_failure;
diff --git a/net/netfilter/ipset/ip_set_bitmap_ip.c b/net/netfilter/ipset/ip_set_bitmap_ip.c
index 64a5643..4783eff 100644
--- a/net/netfilter/ipset/ip_set_bitmap_ip.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ip.c
@@ -41,7 +41,6 @@
/* Type structure */
struct bitmap_ip {
void *members; /* the set members */
- void *extensions; /* data extensions */
u32 first_ip; /* host byte order, included in range */
u32 last_ip; /* host byte order, included in range */
u32 elements; /* number of max elements in the set */
@@ -49,6 +48,8 @@
size_t memsize; /* members size */
u8 netmask; /* subnet netmask */
struct timer_list gc; /* garbage collection */
+ unsigned char extensions[0] /* data extensions */
+ __aligned(__alignof__(u64));
};
/* ADT structure for generic function args */
@@ -224,13 +225,6 @@
map->members = ip_set_alloc(map->memsize);
if (!map->members)
return false;
- if (set->dsize) {
- map->extensions = ip_set_alloc(set->dsize * elements);
- if (!map->extensions) {
- kfree(map->members);
- return false;
- }
- }
map->first_ip = first_ip;
map->last_ip = last_ip;
map->elements = elements;
@@ -316,13 +310,13 @@
pr_debug("hosts %u, elements %llu\n",
hosts, (unsigned long long)elements);
- map = kzalloc(sizeof(*map), GFP_KERNEL);
+ set->dsize = ip_set_elem_len(set, tb, 0, 0);
+ map = ip_set_alloc(sizeof(*map) + elements * set->dsize);
if (!map)
return -ENOMEM;
map->memsize = bitmap_bytes(0, elements - 1);
set->variant = &bitmap_ip;
- set->dsize = ip_set_elem_len(set, tb, 0);
if (!init_map_ip(set, map, first_ip, last_ip,
elements, hosts, netmask)) {
kfree(map);
diff --git a/net/netfilter/ipset/ip_set_bitmap_ipmac.c b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
index 1430535..29dde20 100644
--- a/net/netfilter/ipset/ip_set_bitmap_ipmac.c
+++ b/net/netfilter/ipset/ip_set_bitmap_ipmac.c
@@ -47,24 +47,26 @@
/* Type structure */
struct bitmap_ipmac {
void *members; /* the set members */
- void *extensions; /* MAC + data extensions */
u32 first_ip; /* host byte order, included in range */
u32 last_ip; /* host byte order, included in range */
u32 elements; /* number of max elements in the set */
size_t memsize; /* members size */
struct timer_list gc; /* garbage collector */
+ unsigned char extensions[0] /* MAC + data extensions */
+ __aligned(__alignof__(u64));
};
/* ADT structure for generic function args */
struct bitmap_ipmac_adt_elem {
+ unsigned char ether[ETH_ALEN] __aligned(2);
u16 id;
- unsigned char *ether;
+ u16 add_mac;
};
struct bitmap_ipmac_elem {
unsigned char ether[ETH_ALEN];
unsigned char filled;
-} __attribute__ ((aligned));
+} __aligned(__alignof__(u64));
static inline u32
ip_to_id(const struct bitmap_ipmac *m, u32 ip)
@@ -72,11 +74,11 @@
return ip - m->first_ip;
}
-static inline struct bitmap_ipmac_elem *
-get_elem(void *extensions, u16 id, size_t dsize)
-{
- return (struct bitmap_ipmac_elem *)(extensions + id * dsize);
-}
+#define get_elem(extensions, id, dsize) \
+ (struct bitmap_ipmac_elem *)(extensions + (id) * (dsize))
+
+#define get_const_elem(extensions, id, dsize) \
+ (const struct bitmap_ipmac_elem *)(extensions + (id) * (dsize))
/* Common functions */
@@ -88,10 +90,9 @@
if (!test_bit(e->id, map->members))
return 0;
- elem = get_elem(map->extensions, e->id, dsize);
- if (elem->filled == MAC_FILLED)
- return !e->ether ||
- ether_addr_equal(e->ether, elem->ether);
+ elem = get_const_elem(map->extensions, e->id, dsize);
+ if (e->add_mac && elem->filled == MAC_FILLED)
+ return ether_addr_equal(e->ether, elem->ether);
/* Trigger kernel to fill out the ethernet address */
return -EAGAIN;
}
@@ -103,7 +104,7 @@
if (!test_bit(id, map->members))
return 0;
- elem = get_elem(map->extensions, id, dsize);
+ elem = get_const_elem(map->extensions, id, dsize);
/* Timer not started for the incomplete elements */
return elem->filled == MAC_FILLED;
}
@@ -133,7 +134,7 @@
* and we can reuse it later when MAC is filled out,
* possibly by the kernel
*/
- if (e->ether)
+ if (e->add_mac)
ip_set_timeout_set(timeout, t);
else
*timeout = t;
@@ -150,7 +151,7 @@
elem = get_elem(map->extensions, e->id, dsize);
if (test_bit(e->id, map->members)) {
if (elem->filled == MAC_FILLED) {
- if (e->ether &&
+ if (e->add_mac &&
(flags & IPSET_FLAG_EXIST) &&
!ether_addr_equal(e->ether, elem->ether)) {
/* memcpy isn't atomic */
@@ -159,7 +160,7 @@
ether_addr_copy(elem->ether, e->ether);
}
return IPSET_ADD_FAILED;
- } else if (!e->ether)
+ } else if (!e->add_mac)
/* Already added without ethernet address */
return IPSET_ADD_FAILED;
/* Fill the MAC address and trigger the timer activation */
@@ -168,7 +169,7 @@
ether_addr_copy(elem->ether, e->ether);
elem->filled = MAC_FILLED;
return IPSET_ADD_START_STORED_TIMEOUT;
- } else if (e->ether) {
+ } else if (e->add_mac) {
/* We can store MAC too */
ether_addr_copy(elem->ether, e->ether);
elem->filled = MAC_FILLED;
@@ -191,7 +192,7 @@
u32 id, size_t dsize)
{
const struct bitmap_ipmac_elem *elem =
- get_elem(map->extensions, id, dsize);
+ get_const_elem(map->extensions, id, dsize);
return nla_put_ipaddr4(skb, IPSET_ATTR_IP,
htonl(map->first_ip + id)) ||
@@ -213,7 +214,7 @@
{
struct bitmap_ipmac *map = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct bitmap_ipmac_adt_elem e = { .id = 0 };
+ struct bitmap_ipmac_adt_elem e = { .id = 0, .add_mac = 1 };
struct ip_set_ext ext = IP_SET_INIT_KEXT(skb, opt, set);
u32 ip;
@@ -231,7 +232,7 @@
return -EINVAL;
e.id = ip_to_id(map, ip);
- e.ether = eth_hdr(skb)->h_source;
+ memcpy(e.ether, eth_hdr(skb)->h_source, ETH_ALEN);
return adtfn(set, &e, &ext, &opt->ext, opt->cmdflags);
}
@@ -265,11 +266,10 @@
return -IPSET_ERR_BITMAP_RANGE;
e.id = ip_to_id(map, ip);
- if (tb[IPSET_ATTR_ETHER])
- e.ether = nla_data(tb[IPSET_ATTR_ETHER]);
- else
- e.ether = NULL;
-
+ if (tb[IPSET_ATTR_ETHER]) {
+ memcpy(e.ether, nla_data(tb[IPSET_ATTR_ETHER]), ETH_ALEN);
+ e.add_mac = 1;
+ }
ret = adtfn(set, &e, &ext, &ext, flags);
return ip_set_eexist(ret, flags) ? 0 : ret;
@@ -300,13 +300,6 @@
map->members = ip_set_alloc(map->memsize);
if (!map->members)
return false;
- if (set->dsize) {
- map->extensions = ip_set_alloc(set->dsize * elements);
- if (!map->extensions) {
- kfree(map->members);
- return false;
- }
- }
map->first_ip = first_ip;
map->last_ip = last_ip;
map->elements = elements;
@@ -361,14 +354,15 @@
if (elements > IPSET_BITMAP_MAX_RANGE + 1)
return -IPSET_ERR_BITMAP_RANGE_SIZE;
- map = kzalloc(sizeof(*map), GFP_KERNEL);
+ set->dsize = ip_set_elem_len(set, tb,
+ sizeof(struct bitmap_ipmac_elem),
+ __alignof__(struct bitmap_ipmac_elem));
+ map = ip_set_alloc(sizeof(*map) + elements * set->dsize);
if (!map)
return -ENOMEM;
map->memsize = bitmap_bytes(0, elements - 1);
set->variant = &bitmap_ipmac;
- set->dsize = ip_set_elem_len(set, tb,
- sizeof(struct bitmap_ipmac_elem));
if (!init_map_ipmac(set, map, first_ip, last_ip, elements)) {
kfree(map);
return -ENOMEM;
diff --git a/net/netfilter/ipset/ip_set_bitmap_port.c b/net/netfilter/ipset/ip_set_bitmap_port.c
index 5338ccd..7f0c733 100644
--- a/net/netfilter/ipset/ip_set_bitmap_port.c
+++ b/net/netfilter/ipset/ip_set_bitmap_port.c
@@ -35,12 +35,13 @@
/* Type structure */
struct bitmap_port {
void *members; /* the set members */
- void *extensions; /* data extensions */
u16 first_port; /* host byte order, included in range */
u16 last_port; /* host byte order, included in range */
u32 elements; /* number of max elements in the set */
size_t memsize; /* members size */
struct timer_list gc; /* garbage collection */
+ unsigned char extensions[0] /* data extensions */
+ __aligned(__alignof__(u64));
};
/* ADT structure for generic function args */
@@ -209,13 +210,6 @@
map->members = ip_set_alloc(map->memsize);
if (!map->members)
return false;
- if (set->dsize) {
- map->extensions = ip_set_alloc(set->dsize * map->elements);
- if (!map->extensions) {
- kfree(map->members);
- return false;
- }
- }
map->first_port = first_port;
map->last_port = last_port;
set->timeout = IPSET_NO_TIMEOUT;
@@ -232,6 +226,7 @@
{
struct bitmap_port *map;
u16 first_port, last_port;
+ u32 elements;
if (unlikely(!ip_set_attr_netorder(tb, IPSET_ATTR_PORT) ||
!ip_set_attr_netorder(tb, IPSET_ATTR_PORT_TO) ||
@@ -248,14 +243,15 @@
last_port = tmp;
}
- map = kzalloc(sizeof(*map), GFP_KERNEL);
+ elements = last_port - first_port + 1;
+ set->dsize = ip_set_elem_len(set, tb, 0, 0);
+ map = ip_set_alloc(sizeof(*map) + elements * set->dsize);
if (!map)
return -ENOMEM;
- map->elements = last_port - first_port + 1;
+ map->elements = elements;
map->memsize = bitmap_bytes(0, map->elements);
set->variant = &bitmap_port;
- set->dsize = ip_set_elem_len(set, tb, 0);
if (!init_map_port(set, map, first_port, last_port)) {
kfree(map);
return -ENOMEM;
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 69ab9c26..54f3d7c 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -364,25 +364,27 @@
}
size_t
-ip_set_elem_len(struct ip_set *set, struct nlattr *tb[], size_t len)
+ip_set_elem_len(struct ip_set *set, struct nlattr *tb[], size_t len,
+ size_t align)
{
enum ip_set_ext_id id;
- size_t offset = len;
u32 cadt_flags = 0;
if (tb[IPSET_ATTR_CADT_FLAGS])
cadt_flags = ip_set_get_h32(tb[IPSET_ATTR_CADT_FLAGS]);
if (cadt_flags & IPSET_FLAG_WITH_FORCEADD)
set->flags |= IPSET_CREATE_FLAG_FORCEADD;
+ if (!align)
+ align = 1;
for (id = 0; id < IPSET_EXT_ID_MAX; id++) {
if (!add_extension(id, cadt_flags, tb))
continue;
- offset = ALIGN(offset, ip_set_extensions[id].align);
- set->offset[id] = offset;
+ len = ALIGN(len, ip_set_extensions[id].align);
+ set->offset[id] = len;
set->extensions |= ip_set_extensions[id].type;
- offset += ip_set_extensions[id].len;
+ len += ip_set_extensions[id].len;
}
- return offset;
+ return ALIGN(len, align);
}
EXPORT_SYMBOL_GPL(ip_set_elem_len);
diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h
index 691b54f..e5336ab 100644
--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -72,8 +72,9 @@
DECLARE_BITMAP(used, AHASH_MAX_TUNED);
u8 size; /* size of the array */
u8 pos; /* position of the first free entry */
- unsigned char value[0]; /* the array of the values */
-} __attribute__ ((aligned));
+ unsigned char value[0] /* the array of the values */
+ __aligned(__alignof__(u64));
+};
/* The hash table: the table size stored here in order to make resizing easy */
struct htable {
@@ -475,7 +476,7 @@
mtype_expire(struct ip_set *set, struct htype *h, u8 nets_length, size_t dsize)
{
struct htable *t;
- struct hbucket *n;
+ struct hbucket *n, *tmp;
struct mtype_elem *data;
u32 i, j, d;
#ifdef IP_SET_HASH_WITH_NETS
@@ -510,9 +511,14 @@
}
}
if (d >= AHASH_INIT_SIZE) {
- struct hbucket *tmp = kzalloc(sizeof(*tmp) +
- (n->size - AHASH_INIT_SIZE) * dsize,
- GFP_ATOMIC);
+ if (d >= n->size) {
+ rcu_assign_pointer(hbucket(t, i), NULL);
+ kfree_rcu(n, rcu);
+ continue;
+ }
+ tmp = kzalloc(sizeof(*tmp) +
+ (n->size - AHASH_INIT_SIZE) * dsize,
+ GFP_ATOMIC);
if (!tmp)
/* Still try to delete expired elements */
continue;
@@ -522,7 +528,7 @@
continue;
data = ahash_data(n, j, dsize);
memcpy(tmp->value + d * dsize, data, dsize);
- set_bit(j, tmp->used);
+ set_bit(d, tmp->used);
d++;
}
tmp->pos = d;
@@ -1323,12 +1329,14 @@
#endif
set->variant = &IPSET_TOKEN(HTYPE, 4_variant);
set->dsize = ip_set_elem_len(set, tb,
- sizeof(struct IPSET_TOKEN(HTYPE, 4_elem)));
+ sizeof(struct IPSET_TOKEN(HTYPE, 4_elem)),
+ __alignof__(struct IPSET_TOKEN(HTYPE, 4_elem)));
#ifndef IP_SET_PROTO_UNDEF
} else {
set->variant = &IPSET_TOKEN(HTYPE, 6_variant);
set->dsize = ip_set_elem_len(set, tb,
- sizeof(struct IPSET_TOKEN(HTYPE, 6_elem)));
+ sizeof(struct IPSET_TOKEN(HTYPE, 6_elem)),
+ __alignof__(struct IPSET_TOKEN(HTYPE, 6_elem)));
}
#endif
if (tb[IPSET_ATTR_TIMEOUT]) {
diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c
index 5a30ce6..bbede95 100644
--- a/net/netfilter/ipset/ip_set_list_set.c
+++ b/net/netfilter/ipset/ip_set_list_set.c
@@ -31,7 +31,7 @@
struct rcu_head rcu;
struct list_head list;
ip_set_id_t id;
-};
+} __aligned(__alignof__(u64));
struct set_adt_elem {
ip_set_id_t id;
@@ -618,7 +618,8 @@
size = IP_SET_LIST_MIN_SIZE;
set->variant = &set_variant;
- set->dsize = ip_set_elem_len(set, tb, sizeof(struct set_elem));
+ set->dsize = ip_set_elem_len(set, tb, sizeof(struct set_elem),
+ __alignof__(struct set_elem));
if (!init_list_set(net, set, size))
return -ENOMEM;
if (tb[IPSET_ATTR_TIMEOUT]) {
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 1e24fff..f57b4dc 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1176,6 +1176,7 @@
struct ip_vs_protocol *pp;
struct ip_vs_proto_data *pd;
struct ip_vs_conn *cp;
+ struct sock *sk;
EnterFunction(11);
@@ -1183,13 +1184,12 @@
if (skb->ipvs_property)
return NF_ACCEPT;
+ sk = skb_to_full_sk(skb);
/* Bad... Do not break raw sockets */
- if (unlikely(skb->sk != NULL && hooknum == NF_INET_LOCAL_OUT &&
+ if (unlikely(sk && hooknum == NF_INET_LOCAL_OUT &&
af == AF_INET)) {
- struct sock *sk = skb->sk;
- struct inet_sock *inet = inet_sk(skb->sk);
- if (inet && sk->sk_family == PF_INET && inet->nodefrag)
+ if (sk->sk_family == PF_INET && inet_sk(sk)->nodefrag)
return NF_ACCEPT;
}
@@ -1681,6 +1681,7 @@
struct ip_vs_conn *cp;
int ret, pkts;
int conn_reuse_mode;
+ struct sock *sk;
/* Already marked as IPVS request or reply? */
if (skb->ipvs_property)
@@ -1708,12 +1709,11 @@
ip_vs_fill_iph_skb(af, skb, false, &iph);
/* Bad... Do not break raw sockets */
- if (unlikely(skb->sk != NULL && hooknum == NF_INET_LOCAL_OUT &&
+ sk = skb_to_full_sk(skb);
+ if (unlikely(sk && hooknum == NF_INET_LOCAL_OUT &&
af == AF_INET)) {
- struct sock *sk = skb->sk;
- struct inet_sock *inet = inet_sk(skb->sk);
- if (inet && sk->sk_family == PF_INET && inet->nodefrag)
+ if (sk->sk_family == PF_INET && inet_sk(sk)->nodefrag)
return NF_ACCEPT;
}
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 06eb48f..740cce4 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -825,7 +825,7 @@
struct net *net = sock_net(ctnl);
struct nfnl_log_net *log = nfnl_log_pernet(net);
int ret = 0;
- u16 flags;
+ u16 flags = 0;
if (nfula[NFULA_CFG_CMD]) {
u_int8_t pf = nfmsg->nfgen_family;
diff --git a/net/netfilter/nft_counter.c b/net/netfilter/nft_counter.c
index 1067fb4..c7808fc 100644
--- a/net/netfilter/nft_counter.c
+++ b/net/netfilter/nft_counter.c
@@ -47,27 +47,34 @@
local_bh_enable();
}
-static int nft_counter_dump(struct sk_buff *skb, const struct nft_expr *expr)
+static void nft_counter_fetch(const struct nft_counter_percpu __percpu *counter,
+ struct nft_counter *total)
{
- struct nft_counter_percpu_priv *priv = nft_expr_priv(expr);
- struct nft_counter_percpu *cpu_stats;
- struct nft_counter total;
+ const struct nft_counter_percpu *cpu_stats;
u64 bytes, packets;
unsigned int seq;
int cpu;
- memset(&total, 0, sizeof(total));
+ memset(total, 0, sizeof(*total));
for_each_possible_cpu(cpu) {
- cpu_stats = per_cpu_ptr(priv->counter, cpu);
+ cpu_stats = per_cpu_ptr(counter, cpu);
do {
seq = u64_stats_fetch_begin_irq(&cpu_stats->syncp);
bytes = cpu_stats->counter.bytes;
packets = cpu_stats->counter.packets;
} while (u64_stats_fetch_retry_irq(&cpu_stats->syncp, seq));
- total.packets += packets;
- total.bytes += bytes;
+ total->packets += packets;
+ total->bytes += bytes;
}
+}
+
+static int nft_counter_dump(struct sk_buff *skb, const struct nft_expr *expr)
+{
+ struct nft_counter_percpu_priv *priv = nft_expr_priv(expr);
+ struct nft_counter total;
+
+ nft_counter_fetch(priv->counter, &total);
if (nla_put_be64(skb, NFTA_COUNTER_BYTES, cpu_to_be64(total.bytes)) ||
nla_put_be64(skb, NFTA_COUNTER_PACKETS, cpu_to_be64(total.packets)))
@@ -118,6 +125,31 @@
free_percpu(priv->counter);
}
+static int nft_counter_clone(struct nft_expr *dst, const struct nft_expr *src)
+{
+ struct nft_counter_percpu_priv *priv = nft_expr_priv(src);
+ struct nft_counter_percpu_priv *priv_clone = nft_expr_priv(dst);
+ struct nft_counter_percpu __percpu *cpu_stats;
+ struct nft_counter_percpu *this_cpu;
+ struct nft_counter total;
+
+ nft_counter_fetch(priv->counter, &total);
+
+ cpu_stats = __netdev_alloc_pcpu_stats(struct nft_counter_percpu,
+ GFP_ATOMIC);
+ if (cpu_stats == NULL)
+ return ENOMEM;
+
+ preempt_disable();
+ this_cpu = this_cpu_ptr(cpu_stats);
+ this_cpu->counter.packets = total.packets;
+ this_cpu->counter.bytes = total.bytes;
+ preempt_enable();
+
+ priv_clone->counter = cpu_stats;
+ return 0;
+}
+
static struct nft_expr_type nft_counter_type;
static const struct nft_expr_ops nft_counter_ops = {
.type = &nft_counter_type,
@@ -126,6 +158,7 @@
.init = nft_counter_init,
.destroy = nft_counter_destroy,
.dump = nft_counter_dump,
+ .clone = nft_counter_clone,
};
static struct nft_expr_type nft_counter_type __read_mostly = {
diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c
index 513a8ef..9dec3bd 100644
--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -50,8 +50,9 @@
}
ext = nft_set_elem_ext(set, elem);
- if (priv->expr != NULL)
- nft_expr_clone(nft_set_ext_expr(ext), priv->expr);
+ if (priv->expr != NULL &&
+ nft_expr_clone(nft_set_ext_expr(ext), priv->expr) < 0)
+ return NULL;
return elem;
}
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index af399ca..1cf928f 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1741,6 +1741,20 @@
kfree_rcu(po->rollover, rcu);
}
+static bool packet_extra_vlan_len_allowed(const struct net_device *dev,
+ struct sk_buff *skb)
+{
+ /* Earlier code assumed this would be a VLAN pkt, double-check
+ * this now that we have the actual packet in hand. We can only
+ * do this check on Ethernet devices.
+ */
+ if (unlikely(dev->type != ARPHRD_ETHER))
+ return false;
+
+ skb_reset_mac_header(skb);
+ return likely(eth_hdr(skb)->h_proto == htons(ETH_P_8021Q));
+}
+
static const struct proto_ops packet_ops;
static const struct proto_ops packet_ops_spkt;
@@ -1902,18 +1916,10 @@
goto retry;
}
- if (len > (dev->mtu + dev->hard_header_len + extra_len)) {
- /* Earlier code assumed this would be a VLAN pkt,
- * double-check this now that we have the actual
- * packet in hand.
- */
- struct ethhdr *ehdr;
- skb_reset_mac_header(skb);
- ehdr = eth_hdr(skb);
- if (ehdr->h_proto != htons(ETH_P_8021Q)) {
- err = -EMSGSIZE;
- goto out_unlock;
- }
+ if (len > (dev->mtu + dev->hard_header_len + extra_len) &&
+ !packet_extra_vlan_len_allowed(dev, skb)) {
+ err = -EMSGSIZE;
+ goto out_unlock;
}
skb->protocol = proto;
@@ -2332,6 +2338,15 @@
return false;
}
+static void tpacket_set_protocol(const struct net_device *dev,
+ struct sk_buff *skb)
+{
+ if (dev->type == ARPHRD_ETHER) {
+ skb_reset_mac_header(skb);
+ skb->protocol = eth_hdr(skb)->h_proto;
+ }
+}
+
static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff *skb,
void *frame, struct net_device *dev, int size_max,
__be16 proto, unsigned char *addr, int hlen)
@@ -2368,8 +2383,6 @@
skb_reserve(skb, hlen);
skb_reset_network_header(skb);
- if (!packet_use_direct_xmit(po))
- skb_probe_transport_header(skb, 0);
if (unlikely(po->tp_tx_has_off)) {
int off_min, off_max, off;
off_min = po->tp_hdrlen - sizeof(struct sockaddr_ll);
@@ -2415,6 +2428,8 @@
dev->hard_header_len);
if (unlikely(err))
return err;
+ if (!skb->protocol)
+ tpacket_set_protocol(dev, skb);
data += dev->hard_header_len;
to_write -= dev->hard_header_len;
@@ -2449,6 +2464,8 @@
len = ((to_write > len_max) ? len_max : to_write);
}
+ skb_probe_transport_header(skb, 0);
+
return tp_len;
}
@@ -2493,12 +2510,13 @@
if (unlikely(!(dev->flags & IFF_UP)))
goto out_put;
- reserve = dev->hard_header_len + VLAN_HLEN;
+ if (po->sk.sk_socket->type == SOCK_RAW)
+ reserve = dev->hard_header_len;
size_max = po->tx_ring.frame_size
- (po->tp_hdrlen - sizeof(struct sockaddr_ll));
- if (size_max > dev->mtu + reserve)
- size_max = dev->mtu + reserve;
+ if (size_max > dev->mtu + reserve + VLAN_HLEN)
+ size_max = dev->mtu + reserve + VLAN_HLEN;
do {
ph = packet_current_frame(po, &po->tx_ring,
@@ -2525,18 +2543,10 @@
tp_len = tpacket_fill_skb(po, skb, ph, dev, size_max, proto,
addr, hlen);
if (likely(tp_len >= 0) &&
- tp_len > dev->mtu + dev->hard_header_len) {
- struct ethhdr *ehdr;
- /* Earlier code assumed this would be a VLAN pkt,
- * double-check this now that we have the actual
- * packet in hand.
- */
+ tp_len > dev->mtu + reserve &&
+ !packet_extra_vlan_len_allowed(dev, skb))
+ tp_len = -EMSGSIZE;
- skb_reset_mac_header(skb);
- ehdr = eth_hdr(skb);
- if (ehdr->h_proto != htons(ETH_P_8021Q))
- tp_len = -EMSGSIZE;
- }
if (unlikely(tp_len < 0)) {
if (po->tp_loss) {
__packet_set_status(po, ph,
@@ -2765,18 +2775,10 @@
sock_tx_timestamp(sk, &skb_shinfo(skb)->tx_flags);
- if (!gso_type && (len > dev->mtu + reserve + extra_len)) {
- /* Earlier code assumed this would be a VLAN pkt,
- * double-check this now that we have the actual
- * packet in hand.
- */
- struct ethhdr *ehdr;
- skb_reset_mac_header(skb);
- ehdr = eth_hdr(skb);
- if (ehdr->h_proto != htons(ETH_P_8021Q)) {
- err = -EMSGSIZE;
- goto out_free;
- }
+ if (!gso_type && (len > dev->mtu + reserve + extra_len) &&
+ !packet_extra_vlan_len_allowed(dev, skb)) {
+ err = -EMSGSIZE;
+ goto out_free;
}
skb->protocol = proto;
@@ -2807,8 +2809,8 @@
len += vnet_hdr_len;
}
- if (!packet_use_direct_xmit(po))
- skb_probe_transport_header(skb, reserve);
+ skb_probe_transport_header(skb, reserve);
+
if (unlikely(extra_len == 4))
skb->no_fcs = 1;
@@ -4107,7 +4109,7 @@
err = -EINVAL;
if (unlikely((int)req->tp_block_size <= 0))
goto out;
- if (unlikely(req->tp_block_size & (PAGE_SIZE - 1)))
+ if (unlikely(!PAGE_ALIGNED(req->tp_block_size)))
goto out;
if (po->tp_version >= TPACKET_V3 &&
(int)(req->tp_block_size -
@@ -4119,8 +4121,8 @@
if (unlikely(req->tp_frame_size & (TPACKET_ALIGNMENT - 1)))
goto out;
- rb->frames_per_block = req->tp_block_size/req->tp_frame_size;
- if (unlikely(rb->frames_per_block <= 0))
+ rb->frames_per_block = req->tp_block_size / req->tp_frame_size;
+ if (unlikely(rb->frames_per_block == 0))
goto out;
if (unlikely((rb->frames_per_block * req->tp_block_nr) !=
req->tp_frame_nr))
diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 4f15b7d..1543e39 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -809,8 +809,8 @@
if (!has_sha1)
return -EINVAL;
- memcpy(ep->auth_hmacs_list->hmac_ids, &hmacs->shmac_idents[0],
- hmacs->shmac_num_idents * sizeof(__u16));
+ for (i = 0; i < hmacs->shmac_num_idents; i++)
+ ep->auth_hmacs_list->hmac_ids[i] = htons(hmacs->shmac_idents[i]);
ep->auth_hmacs_list->param_hdr.length = htons(sizeof(sctp_paramhdr_t) +
hmacs->shmac_num_idents * sizeof(__u16));
return 0;
diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
index 229956b..95f82d8 100644
--- a/net/sunrpc/backchannel_rqst.c
+++ b/net/sunrpc/backchannel_rqst.c
@@ -353,12 +353,20 @@
{
struct rpc_xprt *xprt = req->rq_xprt;
struct svc_serv *bc_serv = xprt->bc_serv;
+ struct xdr_buf *rq_rcv_buf = &req->rq_rcv_buf;
spin_lock(&xprt->bc_pa_lock);
list_del(&req->rq_bc_pa_list);
xprt_dec_alloc_count(xprt, 1);
spin_unlock(&xprt->bc_pa_lock);
+ if (copied <= rq_rcv_buf->head[0].iov_len) {
+ rq_rcv_buf->head[0].iov_len = copied;
+ rq_rcv_buf->page_len = 0;
+ } else {
+ rq_rcv_buf->page_len = copied - rq_rcv_buf->head[0].iov_len;
+ }
+
req->rq_private_buf.len = copied;
set_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index bc5b7b5..7fccf96 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1363,6 +1363,7 @@
memcpy(&rqstp->rq_addr, &req->rq_xprt->addr, rqstp->rq_addrlen);
memcpy(&rqstp->rq_arg, &req->rq_rcv_buf, sizeof(rqstp->rq_arg));
memcpy(&rqstp->rq_res, &req->rq_snd_buf, sizeof(rqstp->rq_res));
+ rqstp->rq_arg.len = req->rq_private_buf.len;
/* reset result send buffer "put" position */
resv->iov_len = 0;
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index aaa0b58..955ec15 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -441,6 +441,7 @@
if (state == TCP_LISTEN)
unix_release_sock(skb->sk, 1);
/* passed fds are erased in the kfree_skb hook */
+ UNIXCB(skb).consumed = skb->len;
kfree_skb(skb);
}
@@ -1799,6 +1800,7 @@
* this - does no harm
*/
consume_skb(newskb);
+ newskb = NULL;
}
if (skb_append_pagefrags(skb, page, offset, size)) {
@@ -1811,8 +1813,11 @@
skb->truesize += size;
atomic_add(size, &sk->sk_wmem_alloc);
- if (newskb)
+ if (newskb) {
+ spin_lock(&other->sk_receive_queue.lock);
__skb_queue_tail(&other->sk_receive_queue, newskb);
+ spin_unlock(&other->sk_receive_queue.lock);
+ }
unix_state_unlock(other);
mutex_unlock(&unix_sk(other)->readlock);
@@ -2072,6 +2077,7 @@
do {
int chunk;
+ bool drop_skb;
struct sk_buff *skb, *last;
unix_state_lock(sk);
@@ -2152,7 +2158,11 @@
}
chunk = min_t(unsigned int, unix_skb_len(skb) - skip, size);
+ skb_get(skb);
chunk = state->recv_actor(skb, skip, chunk, state);
+ drop_skb = !unix_skb_len(skb);
+ /* skb is only safe to use if !drop_skb */
+ consume_skb(skb);
if (chunk < 0) {
if (copied == 0)
copied = -EFAULT;
@@ -2161,6 +2171,18 @@
copied += chunk;
size -= chunk;
+ if (drop_skb) {
+ /* the skb was touched by a concurrent reader;
+ * we should not expect anything from this skb
+ * anymore and assume it invalid - we can be
+ * sure it was dropped from the socket queue
+ *
+ * let's report a short read
+ */
+ err = 0;
+ break;
+ }
+
/* Mark read part of skb as used */
if (!(flags & MSG_PEEK)) {
UNIXCB(skb).consumed += chunk;
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 79b4596..edd638b 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -67,10 +67,13 @@
# point this to your LLVM backend with bpf support
LLC=$(srctree)/tools/bpf/llvm/bld/Debug+Asserts/bin/llc
+# asm/sysreg.h inline assmbly used by it is incompatible with llvm.
+# But, ehere is not easy way to fix it, so just exclude it since it is
+# useless for BPF samples.
$(obj)/%.o: $(src)/%.c
clang $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) \
- -D__KERNEL__ -Wno-unused-value -Wno-pointer-sign \
+ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-O2 -emit-llvm -c $< -o -| $(LLC) -march=bpf -filetype=obj -o $@
clang $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) \
- -D__KERNEL__ -Wno-unused-value -Wno-pointer-sign \
+ -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-O2 -emit-llvm -c $< -o -| $(LLC) -march=bpf -filetype=asm -o $@.s
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 125b906..638a38e 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2711,7 +2711,7 @@
# generate a sequence of code that will splice in highlighting information
# using the s// operator.
-foreach my $k (keys @highlights) {
+for (my $k = 0; $k < @highlights; $k++) {
my $pattern = $highlights[$k][0];
my $result = $highlights[$k][1];
# print STDERR "scanning pattern:$pattern, highlight:($result)\n";
diff --git a/security/keys/encrypted-keys/encrypted.c b/security/keys/encrypted-keys/encrypted.c
index 927db9f..696ccfa 100644
--- a/security/keys/encrypted-keys/encrypted.c
+++ b/security/keys/encrypted-keys/encrypted.c
@@ -845,6 +845,8 @@
size_t datalen = prep->datalen;
int ret = 0;
+ if (test_bit(KEY_FLAG_NEGATIVE, &key->flags))
+ return -ENOKEY;
if (datalen <= 0 || datalen > 32767 || !prep->data)
return -EINVAL;
diff --git a/security/keys/trusted.c b/security/keys/trusted.c
index 903dace..16dec53 100644
--- a/security/keys/trusted.c
+++ b/security/keys/trusted.c
@@ -1007,13 +1007,16 @@
*/
static int trusted_update(struct key *key, struct key_preparsed_payload *prep)
{
- struct trusted_key_payload *p = key->payload.data[0];
+ struct trusted_key_payload *p;
struct trusted_key_payload *new_p;
struct trusted_key_options *new_o;
size_t datalen = prep->datalen;
char *datablob;
int ret = 0;
+ if (test_bit(KEY_FLAG_NEGATIVE, &key->flags))
+ return -ENOKEY;
+ p = key->payload.data[0];
if (!p->migratable)
return -EPERM;
if (datalen <= 0 || datalen > 32767 || !prep->data)
diff --git a/security/keys/user_defined.c b/security/keys/user_defined.c
index 28cb30f..8705d79 100644
--- a/security/keys/user_defined.c
+++ b/security/keys/user_defined.c
@@ -120,7 +120,10 @@
if (ret == 0) {
/* attach the new data, displacing the old */
- zap = key->payload.data[0];
+ if (!test_bit(KEY_FLAG_NEGATIVE, &key->flags))
+ zap = key->payload.data[0];
+ else
+ zap = NULL;
rcu_assign_keypointer(key, upayload);
key->expiry = 0;
}
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index 18643bf..456e1a9 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -638,7 +638,7 @@
{
struct avtab_node *node;
- if (!ctab || !key || !avd || !xperms)
+ if (!ctab || !key || !avd)
return;
for (node = avtab_search_node(ctab, key); node;
@@ -657,7 +657,7 @@
if ((u16)(AVTAB_AUDITALLOW|AVTAB_ENABLED) ==
(node->key.specified & (AVTAB_AUDITALLOW|AVTAB_ENABLED)))
avd->auditallow |= node->datum.u.data;
- if ((node->key.specified & AVTAB_ENABLED) &&
+ if (xperms && (node->key.specified & AVTAB_ENABLED) &&
(node->key.specified & AVTAB_XPERMS))
services_compute_xperms_drivers(xperms, node);
}
diff --git a/sound/firewire/dice/dice.c b/sound/firewire/dice/dice.c
index 5d99436..0cda05c 100644
--- a/sound/firewire/dice/dice.c
+++ b/sound/firewire/dice/dice.c
@@ -12,9 +12,11 @@
MODULE_LICENSE("GPL v2");
#define OUI_WEISS 0x001c6a
+#define OUI_LOUD 0x000ff2
#define DICE_CATEGORY_ID 0x04
#define WEISS_CATEGORY_ID 0x00
+#define LOUD_CATEGORY_ID 0x10
static int dice_interface_check(struct fw_unit *unit)
{
@@ -57,6 +59,8 @@
}
if (vendor == OUI_WEISS)
category = WEISS_CATEGORY_ID;
+ else if (vendor == OUI_LOUD)
+ category = LOUD_CATEGORY_ID;
else
category = DICE_CATEGORY_ID;
if (device->config_rom[3] != ((vendor << 8) | category) ||
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 8a7fbdc..963f824 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -312,6 +312,10 @@
(AZX_DCAPS_INTEL_PCH | AZX_DCAPS_SEPARATE_STREAM_TAG |\
AZX_DCAPS_I915_POWERWELL)
+#define AZX_DCAPS_INTEL_BROXTON \
+ (AZX_DCAPS_INTEL_PCH | AZX_DCAPS_SEPARATE_STREAM_TAG |\
+ AZX_DCAPS_I915_POWERWELL)
+
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
(AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB |\
@@ -2124,6 +2128,9 @@
/* Sunrise Point-LP */
{ PCI_DEVICE(0x8086, 0x9d70),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE },
+ /* Broxton-P(Apollolake) */
+ { PCI_DEVICE(0x8086, 0x5a98),
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_BROXTON },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 60cd9e7..bdb6f22 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2378,7 +2378,8 @@
* can cover the codec power request, and so need not set this flag.
* For previous platforms, there is no such power well feature.
*/
- if (is_valleyview_plus(codec) || is_skylake(codec))
+ if (is_valleyview_plus(codec) || is_skylake(codec) ||
+ is_broxton(codec))
codec->core.link_power_control = 1;
if (is_haswell_plus(codec) || is_valleyview_plus(codec)) {
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 2f7b065..9bedf7c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1759,6 +1759,7 @@
ALC882_FIXUP_NO_PRIMARY_HP,
ALC887_FIXUP_ASUS_BASS,
ALC887_FIXUP_BASS_CHMAP,
+ ALC882_FIXUP_DISABLE_AAMIX,
};
static void alc889_fixup_coef(struct hda_codec *codec,
@@ -1920,6 +1921,8 @@
static void alc_fixup_bass_chmap(struct hda_codec *codec,
const struct hda_fixup *fix, int action);
+static void alc_fixup_disable_aamix(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action);
static const struct hda_fixup alc882_fixups[] = {
[ALC882_FIXUP_ABIT_AW9D_MAX] = {
@@ -2151,6 +2154,10 @@
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_bass_chmap,
},
+ [ALC882_FIXUP_DISABLE_AAMIX] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc_fixup_disable_aamix,
+ },
};
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -2218,6 +2225,7 @@
SND_PCI_QUIRK(0x1462, 0x7350, "MSI-7350", ALC889_FIXUP_CD),
SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3/Z87X-UD3H", ALC889_FIXUP_FRONT_HP_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1458, 0xa182, "Gigabyte Z170X-UD3", ALC882_FIXUP_DISABLE_AAMIX),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
@@ -4587,6 +4595,7 @@
ALC292_FIXUP_DISABLE_AAMIX,
ALC298_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC275_FIXUP_DELL_XPS,
+ ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -5167,6 +5176,17 @@
{}
}
},
+ [ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ /* Disable pass-through path for FRONT 14h */
+ {0x20, AC_VERB_SET_COEF_INDEX, 0x36},
+ {0x20, AC_VERB_SET_PROC_COEF, 0x1737},
+ {}
+ },
+ .chained = true,
+ .chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -5180,8 +5200,10 @@
SND_PCI_QUIRK(0x1025, 0x0742, "Acer AO756", ALC271_FIXUP_HP_GATE_MIC_JACK),
SND_PCI_QUIRK(0x1025, 0x0775, "Acer Aspire E1-572", ALC271_FIXUP_HP_GATE_MIC_JACK_E1_572),
SND_PCI_QUIRK(0x1025, 0x079b, "Acer Aspire V5-573G", ALC282_FIXUP_ASPIRE_V5_PINS),
+ SND_PCI_QUIRK(0x1025, 0x106d, "Acer Cloudbook 14", ALC283_FIXUP_CHROME_BOOK),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
SND_PCI_QUIRK(0x1028, 0x054b, "Dell XPS one 2710", ALC275_FIXUP_DELL_XPS),
+ SND_PCI_QUIRK(0x1028, 0x05bd, "Dell Latitude E6440", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05ca, "Dell Latitude E7240", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05cb, "Dell Latitude E7440", ALC292_FIXUP_DELL_E7X),
SND_PCI_QUIRK(0x1028, 0x05da, "Dell Vostro 5460", ALC290_FIXUP_SUBWOOFER),
@@ -5204,6 +5226,7 @@
SND_PCI_QUIRK(0x1028, 0x06de, "Dell", ALC292_FIXUP_DISABLE_AAMIX),
SND_PCI_QUIRK(0x1028, 0x06df, "Dell", ALC292_FIXUP_DISABLE_AAMIX),
SND_PCI_QUIRK(0x1028, 0x06e0, "Dell", ALC292_FIXUP_DISABLE_AAMIX),
+ SND_PCI_QUIRK(0x1028, 0x0704, "Dell XPS 13", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 826122d..2c7c5eb 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3110,6 +3110,29 @@
spec->gpio_led = 0x08;
}
+static bool is_hp_output(struct hda_codec *codec, hda_nid_t pin)
+{
+ unsigned int pin_cfg = snd_hda_codec_get_pincfg(codec, pin);
+
+ /* count line-out, too, as BIOS sets often so */
+ return get_defcfg_connect(pin_cfg) != AC_JACK_PORT_NONE &&
+ (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT ||
+ get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT);
+}
+
+static void fixup_hp_headphone(struct hda_codec *codec, hda_nid_t pin)
+{
+ unsigned int pin_cfg = snd_hda_codec_get_pincfg(codec, pin);
+
+ /* It was changed in the BIOS to just satisfy MS DTM.
+ * Lets turn it back into slaved HP
+ */
+ pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE)) |
+ (AC_JACK_HP_OUT << AC_DEFCFG_DEVICE_SHIFT);
+ pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC | AC_DEFCFG_SEQUENCE))) |
+ 0x1f;
+ snd_hda_codec_set_pincfg(codec, pin, pin_cfg);
+}
static void stac92hd71bxx_fixup_hp(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
@@ -3119,22 +3142,12 @@
if (action != HDA_FIXUP_ACT_PRE_PROBE)
return;
- if (hp_blike_system(codec->core.subsystem_id)) {
- unsigned int pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f);
- if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT ||
- get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER ||
- get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) {
- /* It was changed in the BIOS to just satisfy MS DTM.
- * Lets turn it back into slaved HP
- */
- pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE))
- | (AC_JACK_HP_OUT <<
- AC_DEFCFG_DEVICE_SHIFT);
- pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC
- | AC_DEFCFG_SEQUENCE)))
- | 0x1f;
- snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg);
- }
+ /* when both output A and F are assigned, these are supposedly
+ * dock and built-in headphones; fix both pin configs
+ */
+ if (is_hp_output(codec, 0x0a) && is_hp_output(codec, 0x0f)) {
+ fixup_hp_headphone(codec, 0x0a);
+ fixup_hp_headphone(codec, 0x0f);
}
if (find_mute_led_cfg(codec, 1))
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 7661616..5b4c58c 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -174,6 +174,8 @@
u8 running_status_length;
} ports[0x10];
u8 seen_f5;
+ bool in_sysex;
+ u8 last_cin;
u8 error_resubmit;
int current_port;
};
@@ -468,6 +470,39 @@
}
/*
+ * QinHeng CH345 is buggy: every second packet inside a SysEx has not CIN 4
+ * but the previously seen CIN, but still with three data bytes.
+ */
+static void ch345_broken_sysex_input(struct snd_usb_midi_in_endpoint *ep,
+ uint8_t *buffer, int buffer_length)
+{
+ unsigned int i, cin, length;
+
+ for (i = 0; i + 3 < buffer_length; i += 4) {
+ if (buffer[i] == 0 && i > 0)
+ break;
+ cin = buffer[i] & 0x0f;
+ if (ep->in_sysex &&
+ cin == ep->last_cin &&
+ (buffer[i + 1 + (cin == 0x6)] & 0x80) == 0)
+ cin = 0x4;
+#if 0
+ if (buffer[i + 1] == 0x90) {
+ /*
+ * Either a corrupted running status or a real note-on
+ * message; impossible to detect reliably.
+ */
+ }
+#endif
+ length = snd_usbmidi_cin_length[cin];
+ snd_usbmidi_input_data(ep, 0, &buffer[i + 1], length);
+ ep->in_sysex = cin == 0x4;
+ if (!ep->in_sysex)
+ ep->last_cin = cin;
+ }
+}
+
+/*
* CME protocol: like the standard protocol, but SysEx commands are sent as a
* single USB packet preceded by a 0x0F byte.
*/
@@ -660,6 +695,12 @@
.output_packet = snd_usbmidi_output_standard_packet,
};
+static struct usb_protocol_ops snd_usbmidi_ch345_broken_sysex_ops = {
+ .input = ch345_broken_sysex_input,
+ .output = snd_usbmidi_standard_output,
+ .output_packet = snd_usbmidi_output_standard_packet,
+};
+
/*
* AKAI MPD16 protocol:
*
@@ -1341,6 +1382,7 @@
* Various chips declare a packet size larger than 4 bytes, but
* do not actually work with larger packets:
*/
+ case USB_ID(0x0a67, 0x5011): /* Medeli DD305 */
case USB_ID(0x0a92, 0x1020): /* ESI M4U */
case USB_ID(0x1430, 0x474b): /* RedOctane GH MIDI INTERFACE */
case USB_ID(0x15ca, 0x0101): /* Textech USB Midi Cable */
@@ -2378,6 +2420,10 @@
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
+ case QUIRK_MIDI_CH345:
+ umidi->usb_protocol_ops = &snd_usbmidi_ch345_broken_sysex_ops;
+ err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+ break;
default:
dev_err(&umidi->dev->dev, "invalid quirk type %d\n",
quirk->type);
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 1a1e2e4..c60a776 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2829,6 +2829,17 @@
.idProduct = 0x1020,
},
+/* QinHeng devices */
+{
+ USB_DEVICE(0x1a86, 0x752d),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "QinHeng",
+ .product_name = "CH345",
+ .ifnum = 1,
+ .type = QUIRK_MIDI_CH345
+ }
+},
+
/* KeithMcMillen Stringport */
{
USB_DEVICE(0x1f38, 0x0001),
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 5ca80e7..7016ad8 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -538,6 +538,7 @@
[QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_MIDI_AKAI] = create_any_midi_quirk,
[QUIRK_MIDI_FTDI] = create_any_midi_quirk,
+ [QUIRK_MIDI_CH345] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 15a1271..b665d85 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -95,6 +95,7 @@
QUIRK_MIDI_AKAI,
QUIRK_MIDI_US122L,
QUIRK_MIDI_FTDI,
+ QUIRK_MIDI_CH345,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
QUIRK_AUDIO_EDIROL_UAXX,
diff --git a/tools/Makefile b/tools/Makefile
index d6f307d..7dc820a 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -32,6 +32,10 @@
@echo ' from the kernel command line to build and install one of'
@echo ' the tools above'
@echo ''
+ @echo ' $$ make tools/all'
+ @echo ''
+ @echo ' builds all tools.'
+ @echo ''
@echo ' $$ make tools/install'
@echo ''
@echo ' installs all tools.'
@@ -77,6 +81,11 @@
freefall: FORCE
$(call descend,laptop/$@)
+all: acpi cgroup cpupower hv firewire lguest \
+ perf selftests turbostat usb \
+ virtio vm net x86_energy_perf_policy \
+ tmon freefall
+
acpi_install:
$(call descend,power/$(@:_install=),install)
@@ -101,7 +110,7 @@
install: acpi_install cgroup_install cpupower_install hv_install firewire_install lguest_install \
perf_install selftests_install turbostat_install usb_install \
virtio_install vm_install net_install x86_energy_perf_policy_install \
- tmon freefall_install
+ tmon_install freefall_install
acpi_clean:
$(call descend,power/acpi,clean)
diff --git a/tools/net/Makefile b/tools/net/Makefile
index ee577ea..ddf8880 100644
--- a/tools/net/Makefile
+++ b/tools/net/Makefile
@@ -4,6 +4,9 @@
LEX = flex
YACC = bison
+CFLAGS += -Wall -O2
+CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include
+
%.yacc.c: %.y
$(YACC) -o $@ -d $<
@@ -12,15 +15,13 @@
all : bpf_jit_disasm bpf_dbg bpf_asm
-bpf_jit_disasm : CFLAGS = -Wall -O2 -DPACKAGE='bpf_jit_disasm'
+bpf_jit_disasm : CFLAGS += -DPACKAGE='bpf_jit_disasm'
bpf_jit_disasm : LDLIBS = -lopcodes -lbfd -ldl
bpf_jit_disasm : bpf_jit_disasm.o
-bpf_dbg : CFLAGS = -Wall -O2
bpf_dbg : LDLIBS = -lreadline
bpf_dbg : bpf_dbg.o
-bpf_asm : CFLAGS = -Wall -O2 -I.
bpf_asm : LDLIBS =
bpf_asm : bpf_asm.o bpf_exp.yacc.o bpf_exp.lex.o
bpf_exp.lex.o : bpf_exp.yacc.c
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index 0a945d2..99d127f 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -675,6 +675,7 @@
.fork = perf_event__repipe,
.exit = perf_event__repipe,
.lost = perf_event__repipe,
+ .lost_samples = perf_event__repipe,
.aux = perf_event__repipe,
.itrace_start = perf_event__repipe,
.context_switch = perf_event__repipe,
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 2853ad2..f256fac 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -44,7 +44,7 @@
struct report {
struct perf_tool tool;
struct perf_session *session;
- bool force, use_tui, use_gtk, use_stdio;
+ bool use_tui, use_gtk, use_stdio;
bool hide_unresolved;
bool dont_use_callchains;
bool show_full_info;
@@ -678,7 +678,7 @@
"file", "vmlinux pathname"),
OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
"file", "kallsyms pathname"),
- OPT_BOOLEAN('f', "force", &report.force, "don't complain, do it"),
+ OPT_BOOLEAN('f', "force", &symbol_conf.force, "don't complain, do it"),
OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
"load module symbols - WARNING: use only with -k and LIVE kernel"),
OPT_BOOLEAN('n', "show-nr-samples", &symbol_conf.show_nr_samples,
@@ -832,7 +832,7 @@
}
file.path = input_name;
- file.force = report.force;
+ file.force = symbol_conf.force;
repeat:
session = perf_session__new(&file, false, &report.tool);
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index e5afb89..fa9eb92 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -1430,7 +1430,6 @@
struct popup_action {
struct thread *thread;
- struct dso *dso;
struct map_symbol ms;
int socket;
@@ -1565,7 +1564,6 @@
return 0;
act->ms.map = map;
- act->dso = map->dso;
act->fn = do_zoom_dso;
return 1;
}
@@ -1827,7 +1825,6 @@
while (1) {
struct thread *thread = NULL;
- struct dso *dso = NULL;
struct map *map = NULL;
int choice = 0;
int socked_id = -1;
@@ -1839,8 +1836,6 @@
if (browser->he_selection != NULL) {
thread = hist_browser__selected_thread(browser);
map = browser->selection->map;
- if (map)
- dso = map->dso;
socked_id = browser->he_selection->socket;
}
switch (key) {
@@ -1874,7 +1869,7 @@
hist_browser__dump(browser);
continue;
case 'd':
- actions->dso = dso;
+ actions->ms.map = map;
do_zoom_dso(browser, actions);
continue;
case 'V':
diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c
index d909459..217b5a6 100644
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -76,6 +76,7 @@
.exit = perf_event__exit_del_thread,
.attr = perf_event__process_attr,
.build_id = perf_event__process_build_id,
+ .ordered_events = true,
};
int build_id__sprintf(const u8 *build_id, int len, char *bf)
diff --git a/tools/perf/util/dso.c b/tools/perf/util/dso.c
index 7c0c083..425df5c 100644
--- a/tools/perf/util/dso.c
+++ b/tools/perf/util/dso.c
@@ -933,6 +933,7 @@
/* Add new node and rebalance tree */
rb_link_node(&dso->rb_node, parent, p);
rb_insert_color(&dso->rb_node, root);
+ dso->root = root;
}
return NULL;
}
@@ -945,15 +946,30 @@
void dso__set_long_name(struct dso *dso, const char *name, bool name_allocated)
{
+ struct rb_root *root = dso->root;
+
if (name == NULL)
return;
if (dso->long_name_allocated)
free((char *)dso->long_name);
+ if (root) {
+ rb_erase(&dso->rb_node, root);
+ /*
+ * __dso__findlink_by_longname() isn't guaranteed to add it
+ * back, so a clean removal is required here.
+ */
+ RB_CLEAR_NODE(&dso->rb_node);
+ dso->root = NULL;
+ }
+
dso->long_name = name;
dso->long_name_len = strlen(name);
dso->long_name_allocated = name_allocated;
+
+ if (root)
+ __dso__findlink_by_longname(root, dso, NULL);
}
void dso__set_short_name(struct dso *dso, const char *name, bool name_allocated)
@@ -1046,6 +1062,7 @@
dso->kernel = DSO_TYPE_USER;
dso->needs_swap = DSO_SWAP__UNSET;
RB_CLEAR_NODE(&dso->rb_node);
+ dso->root = NULL;
INIT_LIST_HEAD(&dso->node);
INIT_LIST_HEAD(&dso->data.open_entry);
pthread_mutex_init(&dso->lock, NULL);
diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h
index fc8db9c..45ec4d0 100644
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -135,6 +135,7 @@
pthread_mutex_t lock;
struct list_head node;
struct rb_node rb_node; /* rbtree node sorted by long name */
+ struct rb_root *root; /* root of rbtree that rb_node is in */
struct rb_root symbols[MAP__NR_TYPES];
struct rb_root symbol_names[MAP__NR_TYPES];
struct {
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 5ef90be..8b303ff 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -91,6 +91,7 @@
list_for_each_entry_safe(pos, n, &dsos->head, node) {
RB_CLEAR_NODE(&pos->rb_node);
+ pos->root = NULL;
list_del_init(&pos->node);
dso__put(pos);
}
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index bd8f03d..05012bb 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1183,7 +1183,7 @@
container_of(pf, struct trace_event_finder, pf);
struct perf_probe_point *pp = &pf->pev->point;
struct probe_trace_event *tev;
- struct perf_probe_arg *args;
+ struct perf_probe_arg *args = NULL;
int ret, i;
/* Check number of tevs */
@@ -1198,19 +1198,23 @@
ret = convert_to_trace_point(&pf->sp_die, tf->mod, pf->addr,
pp->retprobe, pp->function, &tev->point);
if (ret < 0)
- return ret;
+ goto end;
tev->point.realname = strdup(dwarf_diename(sc_die));
- if (!tev->point.realname)
- return -ENOMEM;
+ if (!tev->point.realname) {
+ ret = -ENOMEM;
+ goto end;
+ }
pr_debug("Probe point found: %s+%lu\n", tev->point.symbol,
tev->point.offset);
/* Expand special probe argument if exist */
args = zalloc(sizeof(struct perf_probe_arg) * MAX_PROBE_ARGS);
- if (args == NULL)
- return -ENOMEM;
+ if (args == NULL) {
+ ret = -ENOMEM;
+ goto end;
+ }
ret = expand_probe_args(sc_die, pf, args);
if (ret < 0)
@@ -1234,6 +1238,10 @@
}
end:
+ if (ret) {
+ clear_probe_trace_event(tev);
+ tf->ntevs--;
+ }
free(args);
return ret;
}
@@ -1246,7 +1254,7 @@
struct trace_event_finder tf = {
.pf = {.pev = pev, .callback = add_probe_trace_event},
.max_tevs = probe_conf.max_probes, .mod = dbg->mod};
- int ret;
+ int ret, i;
/* Allocate result tevs array */
*tevs = zalloc(sizeof(struct probe_trace_event) * tf.max_tevs);
@@ -1258,6 +1266,8 @@
ret = debuginfo__find_probes(dbg, &tf.pf);
if (ret < 0) {
+ for (i = 0; i < tf.ntevs; i++)
+ clear_probe_trace_event(&tf.tevs[i]);
zfree(tevs);
return ret;
}
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b4cc766..cd08027 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -654,19 +654,24 @@
struct map_groups *kmaps = map__kmaps(map);
struct map *curr_map;
struct symbol *pos;
- int count = 0, moved = 0;
+ int count = 0;
+ struct rb_root old_root = dso->symbols[map->type];
struct rb_root *root = &dso->symbols[map->type];
struct rb_node *next = rb_first(root);
if (!kmaps)
return -1;
+ *root = RB_ROOT;
+
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
+ rb_erase_init(&pos->rb_node, &old_root);
+
module = strchr(pos->name, '\t');
if (module)
*module = '\0';
@@ -674,28 +679,21 @@
curr_map = map_groups__find(kmaps, map->type, pos->start);
if (!curr_map || (filter && filter(curr_map, pos))) {
- rb_erase_init(&pos->rb_node, root);
symbol__delete(pos);
- } else {
- pos->start -= curr_map->start - curr_map->pgoff;
- if (pos->end)
- pos->end -= curr_map->start - curr_map->pgoff;
- if (curr_map->dso != map->dso) {
- rb_erase_init(&pos->rb_node, root);
- symbols__insert(
- &curr_map->dso->symbols[curr_map->type],
- pos);
- ++moved;
- } else {
- ++count;
- }
+ continue;
}
+
+ pos->start -= curr_map->start - curr_map->pgoff;
+ if (pos->end)
+ pos->end -= curr_map->start - curr_map->pgoff;
+ symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
+ ++count;
}
/* Symbols have been adjusted */
dso->adjust_symbols = 1;
- return count + moved;
+ return count;
}
/*
@@ -1438,9 +1436,9 @@
if (lstat(dso->name, &st) < 0)
goto out;
- if (st.st_uid && (st.st_uid != geteuid())) {
+ if (!symbol_conf.force && st.st_uid && (st.st_uid != geteuid())) {
pr_warning("File %s not owned by current user or root, "
- "ignoring it.\n", dso->name);
+ "ignoring it (use -f to override).\n", dso->name);
goto out;
}
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 40073c6..dcd786e 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -84,6 +84,7 @@
unsigned short priv_size;
unsigned short nr_events;
bool try_vmlinux_path,
+ force,
ignore_vmlinux,
ignore_vmlinux_buildid,
show_kernel_path,
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index d8e4b20..0dac7e0 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1173,9 +1173,9 @@
unsigned long long msr;
unsigned int ratio;
- get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
+ get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
- fprintf(stderr, "cpu%d: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr);
+ fprintf(stderr, "cpu%d: MSR_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr);
ratio = (msr >> 40) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency frequency\n",
@@ -1807,7 +1807,7 @@
*
* MSR_SMI_COUNT 0x00000034
*
- * MSR_NHM_PLATFORM_INFO 0x000000ce
+ * MSR_PLATFORM_INFO 0x000000ce
* MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
*
* MSR_PKG_C3_RESIDENCY 0x000003f8
@@ -1876,7 +1876,7 @@
get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
pkg_cstate_limit = pkg_cstate_limits[msr & 0xF];
- get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
+ get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
base_ratio = (msr >> 8) & 0xFF;
base_hz = base_ratio * bclk * 1000000;
diff --git a/tools/testing/selftests/futex/README b/tools/testing/selftests/futex/README
index 3224a04..0558bb9 100644
--- a/tools/testing/selftests/futex/README
+++ b/tools/testing/selftests/futex/README
@@ -27,7 +27,7 @@
o Where possible, any helper functions or other package-wide code shall be
implemented in header files, avoiding the need to compile intermediate object
files.
-o External dependendencies shall remain as minimal as possible. Currently gcc
+o External dependencies shall remain as minimal as possible. Currently gcc
and glibc are the only dependencies.
o Tests return 0 for success and < 0 for failure.
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index e38cc54..882fe83 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -492,6 +492,9 @@
pid_t parent = getppid();
int fd;
void *map1, *map2;
+ int page_size = sysconf(_SC_PAGESIZE);
+
+ ASSERT_LT(0, page_size);
ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0);
ASSERT_EQ(0, ret);
@@ -504,16 +507,16 @@
EXPECT_EQ(parent, syscall(__NR_getppid));
map1 = (void *)syscall(sysno,
- NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, PAGE_SIZE);
+ NULL, page_size, PROT_READ, MAP_PRIVATE, fd, page_size);
EXPECT_NE(MAP_FAILED, map1);
/* mmap2() should never return. */
map2 = (void *)syscall(sysno,
- NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0x0C0FFEE);
+ NULL, page_size, PROT_READ, MAP_PRIVATE, fd, 0x0C0FFEE);
EXPECT_EQ(MAP_FAILED, map2);
/* The test failed, so clean up the resources. */
- munmap(map1, PAGE_SIZE);
- munmap(map2, PAGE_SIZE);
+ munmap(map1, page_size);
+ munmap(map2, page_size);
close(fd);
}
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c
index bcf5ec7..5a60162 100644
--- a/tools/vm/page-types.c
+++ b/tools/vm/page-types.c
@@ -128,6 +128,7 @@
[KPF_THP] = "t:thp",
[KPF_BALLOON] = "o:balloon",
[KPF_ZERO_PAGE] = "z:zero_page",
+ [KPF_IDLE] = "i:idle_page",
[KPF_RESERVED] = "r:reserved",
[KPF_MLOCKED] = "m:mlocked",
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index 21a0ab2..69bca18 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -221,17 +221,23 @@
kvm_timer_update_state(vcpu);
/*
- * If we enter the guest with the virtual input level to the VGIC
- * asserted, then we have already told the VGIC what we need to, and
- * we don't need to exit from the guest until the guest deactivates
- * the already injected interrupt, so therefore we should set the
- * hardware active state to prevent unnecessary exits from the guest.
- *
- * Conversely, if the virtual input level is deasserted, then always
- * clear the hardware active state to ensure that hardware interrupts
- * from the timer triggers a guest exit.
- */
- if (timer->irq.level)
+ * If we enter the guest with the virtual input level to the VGIC
+ * asserted, then we have already told the VGIC what we need to, and
+ * we don't need to exit from the guest until the guest deactivates
+ * the already injected interrupt, so therefore we should set the
+ * hardware active state to prevent unnecessary exits from the guest.
+ *
+ * Also, if we enter the guest with the virtual timer interrupt active,
+ * then it must be active on the physical distributor, because we set
+ * the HW bit and the guest must be able to deactivate the virtual and
+ * physical interrupt at the same time.
+ *
+ * Conversely, if the virtual input level is deasserted and the virtual
+ * interrupt is not active, then always clear the hardware active state
+ * to ensure that hardware interrupts from the timer triggers a guest
+ * exit.
+ */
+ if (timer->irq.level || kvm_vgic_map_is_active(vcpu, timer->map))
phys_active = true;
else
phys_active = false;
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 5335383..65461f8 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -1096,6 +1096,27 @@
vgic_set_lr(vcpu, lr_nr, vlr);
}
+static bool dist_active_irq(struct kvm_vcpu *vcpu)
+{
+ struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
+ return test_bit(vcpu->vcpu_id, dist->irq_active_on_cpu);
+}
+
+bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, struct irq_phys_map *map)
+{
+ int i;
+
+ for (i = 0; i < vcpu->arch.vgic_cpu.nr_lr; i++) {
+ struct vgic_lr vlr = vgic_get_lr(vcpu, i);
+
+ if (vlr.irq == map->virt_irq && vlr.state & LR_STATE_ACTIVE)
+ return true;
+ }
+
+ return dist_active_irq(vcpu);
+}
+
/*
* An interrupt may have been disabled after being made pending on the
* CPU interface (the classic case is a timer running while we're
@@ -1248,7 +1269,7 @@
* may have been serviced from another vcpu. In all cases,
* move along.
*/
- if (!kvm_vgic_vcpu_pending_irq(vcpu) && !kvm_vgic_vcpu_active_irq(vcpu))
+ if (!kvm_vgic_vcpu_pending_irq(vcpu) && !dist_active_irq(vcpu))
goto epilog;
/* SGIs */
@@ -1396,25 +1417,13 @@
static bool vgic_sync_hwirq(struct kvm_vcpu *vcpu, int lr, struct vgic_lr vlr)
{
struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
- struct irq_phys_map *map;
- bool phys_active;
bool level_pending;
- int ret;
if (!(vlr.state & LR_HW))
return false;
- map = vgic_irq_map_search(vcpu, vlr.irq);
- BUG_ON(!map);
-
- ret = irq_get_irqchip_state(map->irq,
- IRQCHIP_STATE_ACTIVE,
- &phys_active);
-
- WARN_ON(ret);
-
- if (phys_active)
- return 0;
+ if (vlr.state & LR_STATE_ACTIVE)
+ return false;
spin_lock(&dist->lock);
level_pending = process_queued_irq(vcpu, lr, vlr);
@@ -1479,17 +1488,6 @@
return test_bit(vcpu->vcpu_id, dist->irq_pending_on_cpu);
}
-int kvm_vgic_vcpu_active_irq(struct kvm_vcpu *vcpu)
-{
- struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
-
- if (!irqchip_in_kernel(vcpu->kvm))
- return 0;
-
- return test_bit(vcpu->vcpu_id, dist->irq_active_on_cpu);
-}
-
-
void vgic_kick_vcpus(struct kvm *kvm)
{
struct kvm_vcpu *vcpu;