| /* |
| * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335 |
| * |
| * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include "am33xx.dtsi" |
| |
| / { |
| model = "CompuLab CM-T335"; |
| compatible = "compulab,cm-t335", "ti,am33xx"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x8000000>; /* 128 MB */ |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_led_pins>; |
| led@0 { |
| label = "cm_t335:green"; |
| gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */ |
| linux,default-trigger = "heartbeat"; |
| }; |
| }; |
| |
| /* regulator for mmc */ |
| vmmc_fixed: fixedregulator@0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vmmc_fixed"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&ecap0 0 50000 0>; |
| brightness-levels = <0 51 53 56 62 75 101 152 255>; |
| default-brightness-level = <8>; |
| }; |
| }; |
| |
| &am33xx_pinmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bluetooth_pins>; |
| |
| i2c0_pins: pinmux_i2c0_pins { |
| pinctrl-single,pins = < |
| /* i2c0_sda.i2c0_sda */ |
| AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* i2c0_scl.i2c0_scl */ |
| AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) |
| >; |
| }; |
| |
| i2c1_pins: pinmux_i2c1_pins { |
| pinctrl-single,pins = < |
| /* uart0_ctsn.i2c1_sda */ |
| AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2) |
| /* uart0_rtsn.i2c1_scl */ |
| AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) |
| >; |
| }; |
| |
| gpio_led_pins: pinmux_gpio_led_pins { |
| pinctrl-single,pins = < |
| /* gpmc_csn3.gpio2_0 */ |
| AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7) |
| >; |
| }; |
| |
| nandflash_pins: pinmux_nandflash_pins { |
| pinctrl-single,pins = < |
| /* gpmc_ad0.gpmc_ad0 */ |
| AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad1.gpmc_ad1 */ |
| AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad2.gpmc_ad2 */ |
| AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad3.gpmc_ad3 */ |
| AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad4.gpmc_ad4 */ |
| AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad5.gpmc_ad5 */ |
| AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad6.gpmc_ad6 */ |
| AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_ad7.gpmc_ad7 */ |
| AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_wait0.gpmc_wait0 */ |
| AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* gpmc_wpn.gpio0_30 */ |
| AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) |
| /* gpmc_csn0.gpmc_csn0 */ |
| AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) |
| /* gpmc_advn_ale.gpmc_advn_ale */ |
| AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) |
| /* gpmc_oen_ren.gpmc_oen_ren */ |
| AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) |
| /* gpmc_wen.gpmc_wen */ |
| AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) |
| /* gpmc_ben0_cle.gpmc_ben0_cle */ |
| AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) |
| >; |
| }; |
| |
| uart0_pins: pinmux_uart0_pins { |
| pinctrl-single,pins = < |
| /* uart0_rxd.uart0_rxd */ |
| AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* uart0_txd.uart0_txd */ |
| AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) |
| >; |
| }; |
| |
| uart1_pins: pinmux_uart1_pins { |
| pinctrl-single,pins = < |
| /* uart1_ctsn.uart1_ctsn */ |
| AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) |
| /* uart1_rtsn.uart1_rtsn */ |
| AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) |
| /* uart1_rxd.uart1_rxd */ |
| AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* uart1_txd.uart1_txd */ |
| AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) |
| >; |
| }; |
| |
| ecap0_pins: pinmux_ecap0_pins { |
| pinctrl-single,pins = < |
| /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ |
| AM33XX_IOPAD(0x964, 0x0) |
| >; |
| }; |
| |
| cpsw_default: cpsw_default { |
| pinctrl-single,pins = < |
| /* Slave 1 */ |
| /* mii1_tx_en.rgmii1_tctl */ |
| AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_rxdv.rgmii1_rctl */ |
| AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_txd3.rgmii1_td3 */ |
| AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_txd2.rgmii1_td2 */ |
| AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_txd1.rgmii1_td1 */ |
| AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_txd0.rgmii1_td0 */ |
| AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_txclk.rgmii1_tclk */ |
| AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_rxclk.rgmii1_rclk */ |
| AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_rxd3.rgmii1_rd3 */ |
| AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_rxd2.rgmii1_rd2 */ |
| AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_rxd1.rgmii1_rd1 */ |
| AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) |
| /* mii1_rxd0.rgmii1_rd0 */ |
| AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) |
| >; |
| }; |
| |
| cpsw_sleep: cpsw_sleep { |
| pinctrl-single,pins = < |
| /* Slave 1 reset value */ |
| AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| >; |
| }; |
| |
| davinci_mdio_default: davinci_mdio_default { |
| pinctrl-single,pins = < |
| /* mdio_data.mdio_data */ |
| AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) |
| /* mdio_clk.mdio_clk */ |
| AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) |
| >; |
| }; |
| |
| davinci_mdio_sleep: davinci_mdio_sleep { |
| pinctrl-single,pins = < |
| /* MDIO reset value */ |
| AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) |
| >; |
| }; |
| |
| mmc1_pins: pinmux_mmc1_pins { |
| pinctrl-single,pins = < |
| /* mmc0_dat3.mmc0_dat3 */ |
| AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* mmc0_dat2.mmc0_dat2 */ |
| AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* mmc0_dat1.mmc0_dat1 */ |
| AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* mmc0_dat0.mmc0_dat0 */ |
| AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* mmc0_clk.mmc0_clk */ |
| AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) |
| /* mmc0_cmd.mmc0_cmd */ |
| AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) |
| >; |
| }; |
| |
| /* wl1271 bluetooth */ |
| bluetooth_pins: pinmux_bluetooth_pins { |
| pinctrl-single,pins = < |
| /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */ |
| AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7) |
| >; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| |
| status = "okay"; |
| }; |
| |
| /* WLS1271 bluetooth */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>; |
| |
| status = "okay"; |
| }; |
| |
| &i2c0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| /* CM-T335 board EEPROM */ |
| eeprom: 24c02@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| pagesize = <16>; |
| }; |
| /* Real Time Clock */ |
| ext_rtc: em3027@56 { |
| compatible = "emmicro,em3027"; |
| reg = <0x56>; |
| }; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
| |
| &usb_ctrl_mod { |
| status = "okay"; |
| }; |
| |
| &usb0_phy { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |
| |
| &cppi41dma { |
| status = "okay"; |
| }; |
| |
| &epwmss0 { |
| status = "okay"; |
| |
| ecap0: ecap@48300100 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ecap0_pins>; |
| }; |
| }; |
| |
| &gpmc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&nandflash_pins>; |
| ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ |
| nand@0,0 { |
| reg = <0 0 0>; /* CS0, offset 0 */ |
| ti,nand-ecc-opt = "bch8"; |
| ti,elm-id = <&elm>; |
| nand-bus-width = <8>; |
| gpmc,device-width = <1>; |
| gpmc,sync-clk-ps = <0>; |
| gpmc,cs-on-ns = <0>; |
| gpmc,cs-rd-off-ns = <44>; |
| gpmc,cs-wr-off-ns = <44>; |
| gpmc,adv-on-ns = <6>; |
| gpmc,adv-rd-off-ns = <34>; |
| gpmc,adv-wr-off-ns = <44>; |
| gpmc,we-on-ns = <0>; |
| gpmc,we-off-ns = <40>; |
| gpmc,oe-on-ns = <0>; |
| gpmc,oe-off-ns = <54>; |
| gpmc,access-ns = <64>; |
| gpmc,rd-cycle-ns = <82>; |
| gpmc,wr-cycle-ns = <82>; |
| gpmc,wait-on-read = "true"; |
| gpmc,wait-on-write = "true"; |
| gpmc,bus-turnaround-ns = <0>; |
| gpmc,cycle2cycle-delay-ns = <0>; |
| gpmc,clk-activation-ns = <0>; |
| gpmc,wait-monitoring-ns = <0>; |
| gpmc,wr-access-ns = <40>; |
| gpmc,wr-data-mux-bus-ns = <0>; |
| /* MTD partition table */ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| partition@0 { |
| label = "spl"; |
| reg = <0x00000000 0x00200000>; |
| }; |
| partition@1 { |
| label = "uboot"; |
| reg = <0x00200000 0x00100000>; |
| }; |
| partition@2 { |
| label = "uboot environment"; |
| reg = <0x00300000 0x00100000>; |
| }; |
| partition@3 { |
| label = "dtb"; |
| reg = <0x00400000 0x00100000>; |
| }; |
| partition@4 { |
| label = "splash"; |
| reg = <0x00500000 0x00400000>; |
| }; |
| partition@5 { |
| label = "linux"; |
| reg = <0x00900000 0x00600000>; |
| }; |
| partition@6 { |
| label = "rootfs"; |
| reg = <0x00F00000 0>; |
| }; |
| }; |
| }; |
| |
| &elm { |
| status = "okay"; |
| }; |
| |
| &mac { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&cpsw_default>; |
| pinctrl-1 = <&cpsw_sleep>; |
| slaves = <1>; |
| status = "okay"; |
| }; |
| |
| &davinci_mdio { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&davinci_mdio_default>; |
| pinctrl-1 = <&davinci_mdio_sleep>; |
| status = "okay"; |
| }; |
| |
| &cpsw_emac0 { |
| phy_id = <&davinci_mdio>, <0>; |
| phy-mode = "rgmii-txid"; |
| }; |
| |
| &mmc1 { |
| status = "okay"; |
| vmmc-supply = <&vmmc_fixed>; |
| bus-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| }; |