| /* |
| * Cryptographic API. |
| * |
| * Support for Samsung S5PV210 HW acceleration. |
| * |
| * Copyright (C) 2011 NetUP Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/crypto.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/scatterlist.h> |
| |
| #include <crypto/ctr.h> |
| #include <crypto/aes.h> |
| #include <crypto/algapi.h> |
| #include <crypto/scatterwalk.h> |
| |
| #define _SBF(s, v) ((v) << (s)) |
| |
| /* Feed control registers */ |
| #define SSS_REG_FCINTSTAT 0x0000 |
| #define SSS_FCINTSTAT_BRDMAINT BIT(3) |
| #define SSS_FCINTSTAT_BTDMAINT BIT(2) |
| #define SSS_FCINTSTAT_HRDMAINT BIT(1) |
| #define SSS_FCINTSTAT_PKDMAINT BIT(0) |
| |
| #define SSS_REG_FCINTENSET 0x0004 |
| #define SSS_FCINTENSET_BRDMAINTENSET BIT(3) |
| #define SSS_FCINTENSET_BTDMAINTENSET BIT(2) |
| #define SSS_FCINTENSET_HRDMAINTENSET BIT(1) |
| #define SSS_FCINTENSET_PKDMAINTENSET BIT(0) |
| |
| #define SSS_REG_FCINTENCLR 0x0008 |
| #define SSS_FCINTENCLR_BRDMAINTENCLR BIT(3) |
| #define SSS_FCINTENCLR_BTDMAINTENCLR BIT(2) |
| #define SSS_FCINTENCLR_HRDMAINTENCLR BIT(1) |
| #define SSS_FCINTENCLR_PKDMAINTENCLR BIT(0) |
| |
| #define SSS_REG_FCINTPEND 0x000C |
| #define SSS_FCINTPEND_BRDMAINTP BIT(3) |
| #define SSS_FCINTPEND_BTDMAINTP BIT(2) |
| #define SSS_FCINTPEND_HRDMAINTP BIT(1) |
| #define SSS_FCINTPEND_PKDMAINTP BIT(0) |
| |
| #define SSS_REG_FCFIFOSTAT 0x0010 |
| #define SSS_FCFIFOSTAT_BRFIFOFUL BIT(7) |
| #define SSS_FCFIFOSTAT_BRFIFOEMP BIT(6) |
| #define SSS_FCFIFOSTAT_BTFIFOFUL BIT(5) |
| #define SSS_FCFIFOSTAT_BTFIFOEMP BIT(4) |
| #define SSS_FCFIFOSTAT_HRFIFOFUL BIT(3) |
| #define SSS_FCFIFOSTAT_HRFIFOEMP BIT(2) |
| #define SSS_FCFIFOSTAT_PKFIFOFUL BIT(1) |
| #define SSS_FCFIFOSTAT_PKFIFOEMP BIT(0) |
| |
| #define SSS_REG_FCFIFOCTRL 0x0014 |
| #define SSS_FCFIFOCTRL_DESSEL BIT(2) |
| #define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00) |
| #define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01) |
| #define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02) |
| |
| #define SSS_REG_FCBRDMAS 0x0020 |
| #define SSS_REG_FCBRDMAL 0x0024 |
| #define SSS_REG_FCBRDMAC 0x0028 |
| #define SSS_FCBRDMAC_BYTESWAP BIT(1) |
| #define SSS_FCBRDMAC_FLUSH BIT(0) |
| |
| #define SSS_REG_FCBTDMAS 0x0030 |
| #define SSS_REG_FCBTDMAL 0x0034 |
| #define SSS_REG_FCBTDMAC 0x0038 |
| #define SSS_FCBTDMAC_BYTESWAP BIT(1) |
| #define SSS_FCBTDMAC_FLUSH BIT(0) |
| |
| #define SSS_REG_FCHRDMAS 0x0040 |
| #define SSS_REG_FCHRDMAL 0x0044 |
| #define SSS_REG_FCHRDMAC 0x0048 |
| #define SSS_FCHRDMAC_BYTESWAP BIT(1) |
| #define SSS_FCHRDMAC_FLUSH BIT(0) |
| |
| #define SSS_REG_FCPKDMAS 0x0050 |
| #define SSS_REG_FCPKDMAL 0x0054 |
| #define SSS_REG_FCPKDMAC 0x0058 |
| #define SSS_FCPKDMAC_BYTESWAP BIT(3) |
| #define SSS_FCPKDMAC_DESCEND BIT(2) |
| #define SSS_FCPKDMAC_TRANSMIT BIT(1) |
| #define SSS_FCPKDMAC_FLUSH BIT(0) |
| |
| #define SSS_REG_FCPKDMAO 0x005C |
| |
| /* AES registers */ |
| #define SSS_REG_AES_CONTROL 0x00 |
| #define SSS_AES_BYTESWAP_DI BIT(11) |
| #define SSS_AES_BYTESWAP_DO BIT(10) |
| #define SSS_AES_BYTESWAP_IV BIT(9) |
| #define SSS_AES_BYTESWAP_CNT BIT(8) |
| #define SSS_AES_BYTESWAP_KEY BIT(7) |
| #define SSS_AES_KEY_CHANGE_MODE BIT(6) |
| #define SSS_AES_KEY_SIZE_128 _SBF(4, 0x00) |
| #define SSS_AES_KEY_SIZE_192 _SBF(4, 0x01) |
| #define SSS_AES_KEY_SIZE_256 _SBF(4, 0x02) |
| #define SSS_AES_FIFO_MODE BIT(3) |
| #define SSS_AES_CHAIN_MODE_ECB _SBF(1, 0x00) |
| #define SSS_AES_CHAIN_MODE_CBC _SBF(1, 0x01) |
| #define SSS_AES_CHAIN_MODE_CTR _SBF(1, 0x02) |
| #define SSS_AES_MODE_DECRYPT BIT(0) |
| |
| #define SSS_REG_AES_STATUS 0x04 |
| #define SSS_AES_BUSY BIT(2) |
| #define SSS_AES_INPUT_READY BIT(1) |
| #define SSS_AES_OUTPUT_READY BIT(0) |
| |
| #define SSS_REG_AES_IN_DATA(s) (0x10 + (s << 2)) |
| #define SSS_REG_AES_OUT_DATA(s) (0x20 + (s << 2)) |
| #define SSS_REG_AES_IV_DATA(s) (0x30 + (s << 2)) |
| #define SSS_REG_AES_CNT_DATA(s) (0x40 + (s << 2)) |
| #define SSS_REG_AES_KEY_DATA(s) (0x80 + (s << 2)) |
| |
| #define SSS_REG(dev, reg) ((dev)->ioaddr + (SSS_REG_##reg)) |
| #define SSS_READ(dev, reg) __raw_readl(SSS_REG(dev, reg)) |
| #define SSS_WRITE(dev, reg, val) __raw_writel((val), SSS_REG(dev, reg)) |
| |
| #define SSS_AES_REG(dev, reg) ((dev)->aes_ioaddr + SSS_REG_##reg) |
| #define SSS_AES_WRITE(dev, reg, val) __raw_writel((val), \ |
| SSS_AES_REG(dev, reg)) |
| |
| /* HW engine modes */ |
| #define FLAGS_AES_DECRYPT BIT(0) |
| #define FLAGS_AES_MODE_MASK _SBF(1, 0x03) |
| #define FLAGS_AES_CBC _SBF(1, 0x01) |
| #define FLAGS_AES_CTR _SBF(1, 0x02) |
| |
| #define AES_KEY_LEN 16 |
| #define CRYPTO_QUEUE_LEN 1 |
| |
| /** |
| * struct samsung_aes_variant - platform specific SSS driver data |
| * @aes_offset: AES register offset from SSS module's base. |
| * |
| * Specifies platform specific configuration of SSS module. |
| * Note: A structure for driver specific platform data is used for future |
| * expansion of its usage. |
| */ |
| struct samsung_aes_variant { |
| unsigned int aes_offset; |
| }; |
| |
| struct s5p_aes_reqctx { |
| unsigned long mode; |
| }; |
| |
| struct s5p_aes_ctx { |
| struct s5p_aes_dev *dev; |
| |
| uint8_t aes_key[AES_MAX_KEY_SIZE]; |
| uint8_t nonce[CTR_RFC3686_NONCE_SIZE]; |
| int keylen; |
| }; |
| |
| struct s5p_aes_dev { |
| struct device *dev; |
| struct clk *clk; |
| void __iomem *ioaddr; |
| void __iomem *aes_ioaddr; |
| int irq_fc; |
| |
| struct ablkcipher_request *req; |
| struct s5p_aes_ctx *ctx; |
| struct scatterlist *sg_src; |
| struct scatterlist *sg_dst; |
| |
| /* In case of unaligned access: */ |
| struct scatterlist *sg_src_cpy; |
| struct scatterlist *sg_dst_cpy; |
| |
| struct tasklet_struct tasklet; |
| struct crypto_queue queue; |
| bool busy; |
| spinlock_t lock; |
| |
| struct samsung_aes_variant *variant; |
| }; |
| |
| static struct s5p_aes_dev *s5p_dev; |
| |
| static const struct samsung_aes_variant s5p_aes_data = { |
| .aes_offset = 0x4000, |
| }; |
| |
| static const struct samsung_aes_variant exynos_aes_data = { |
| .aes_offset = 0x200, |
| }; |
| |
| static const struct of_device_id s5p_sss_dt_match[] = { |
| { |
| .compatible = "samsung,s5pv210-secss", |
| .data = &s5p_aes_data, |
| }, |
| { |
| .compatible = "samsung,exynos4210-secss", |
| .data = &exynos_aes_data, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, s5p_sss_dt_match); |
| |
| static inline struct samsung_aes_variant *find_s5p_sss_version |
| (struct platform_device *pdev) |
| { |
| if (IS_ENABLED(CONFIG_OF) && (pdev->dev.of_node)) { |
| const struct of_device_id *match; |
| |
| match = of_match_node(s5p_sss_dt_match, |
| pdev->dev.of_node); |
| return (struct samsung_aes_variant *)match->data; |
| } |
| return (struct samsung_aes_variant *) |
| platform_get_device_id(pdev)->driver_data; |
| } |
| |
| static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg) |
| { |
| SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg)); |
| SSS_WRITE(dev, FCBRDMAL, sg_dma_len(sg)); |
| } |
| |
| static void s5p_set_dma_outdata(struct s5p_aes_dev *dev, struct scatterlist *sg) |
| { |
| SSS_WRITE(dev, FCBTDMAS, sg_dma_address(sg)); |
| SSS_WRITE(dev, FCBTDMAL, sg_dma_len(sg)); |
| } |
| |
| static void s5p_free_sg_cpy(struct s5p_aes_dev *dev, struct scatterlist **sg) |
| { |
| int len; |
| |
| if (!*sg) |
| return; |
| |
| len = ALIGN(dev->req->nbytes, AES_BLOCK_SIZE); |
| free_pages((unsigned long)sg_virt(*sg), get_order(len)); |
| |
| kfree(*sg); |
| *sg = NULL; |
| } |
| |
| static void s5p_sg_copy_buf(void *buf, struct scatterlist *sg, |
| unsigned int nbytes, int out) |
| { |
| struct scatter_walk walk; |
| |
| if (!nbytes) |
| return; |
| |
| scatterwalk_start(&walk, sg); |
| scatterwalk_copychunks(buf, &walk, nbytes, out); |
| scatterwalk_done(&walk, out, 0); |
| } |
| |
| static void s5p_aes_complete(struct s5p_aes_dev *dev, int err) |
| { |
| if (dev->sg_dst_cpy) { |
| dev_dbg(dev->dev, |
| "Copying %d bytes of output data back to original place\n", |
| dev->req->nbytes); |
| s5p_sg_copy_buf(sg_virt(dev->sg_dst_cpy), dev->req->dst, |
| dev->req->nbytes, 1); |
| } |
| s5p_free_sg_cpy(dev, &dev->sg_src_cpy); |
| s5p_free_sg_cpy(dev, &dev->sg_dst_cpy); |
| |
| /* holding a lock outside */ |
| dev->req->base.complete(&dev->req->base, err); |
| dev->busy = false; |
| } |
| |
| static void s5p_unset_outdata(struct s5p_aes_dev *dev) |
| { |
| dma_unmap_sg(dev->dev, dev->sg_dst, 1, DMA_FROM_DEVICE); |
| } |
| |
| static void s5p_unset_indata(struct s5p_aes_dev *dev) |
| { |
| dma_unmap_sg(dev->dev, dev->sg_src, 1, DMA_TO_DEVICE); |
| } |
| |
| static int s5p_make_sg_cpy(struct s5p_aes_dev *dev, struct scatterlist *src, |
| struct scatterlist **dst) |
| { |
| void *pages; |
| int len; |
| |
| *dst = kmalloc(sizeof(**dst), GFP_ATOMIC); |
| if (!*dst) |
| return -ENOMEM; |
| |
| len = ALIGN(dev->req->nbytes, AES_BLOCK_SIZE); |
| pages = (void *)__get_free_pages(GFP_ATOMIC, get_order(len)); |
| if (!pages) { |
| kfree(*dst); |
| *dst = NULL; |
| return -ENOMEM; |
| } |
| |
| s5p_sg_copy_buf(pages, src, dev->req->nbytes, 0); |
| |
| sg_init_table(*dst, 1); |
| sg_set_buf(*dst, pages, len); |
| |
| return 0; |
| } |
| |
| static int s5p_set_outdata(struct s5p_aes_dev *dev, struct scatterlist *sg) |
| { |
| int err; |
| |
| if (!sg->length) { |
| err = -EINVAL; |
| goto exit; |
| } |
| |
| err = dma_map_sg(dev->dev, sg, 1, DMA_FROM_DEVICE); |
| if (!err) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| dev->sg_dst = sg; |
| err = 0; |
| |
| exit: |
| return err; |
| } |
| |
| static int s5p_set_indata(struct s5p_aes_dev *dev, struct scatterlist *sg) |
| { |
| int err; |
| |
| if (!sg->length) { |
| err = -EINVAL; |
| goto exit; |
| } |
| |
| err = dma_map_sg(dev->dev, sg, 1, DMA_TO_DEVICE); |
| if (!err) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| dev->sg_src = sg; |
| err = 0; |
| |
| exit: |
| return err; |
| } |
| |
| /* |
| * Returns true if new transmitting (output) data is ready and its |
| * address+length have to be written to device (by calling |
| * s5p_set_dma_outdata()). False otherwise. |
| */ |
| static bool s5p_aes_tx(struct s5p_aes_dev *dev) |
| { |
| int err = 0; |
| bool ret = false; |
| |
| s5p_unset_outdata(dev); |
| |
| if (!sg_is_last(dev->sg_dst)) { |
| err = s5p_set_outdata(dev, sg_next(dev->sg_dst)); |
| if (err) |
| s5p_aes_complete(dev, err); |
| else |
| ret = true; |
| } else { |
| s5p_aes_complete(dev, err); |
| |
| dev->busy = true; |
| tasklet_schedule(&dev->tasklet); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Returns true if new receiving (input) data is ready and its |
| * address+length have to be written to device (by calling |
| * s5p_set_dma_indata()). False otherwise. |
| */ |
| static bool s5p_aes_rx(struct s5p_aes_dev *dev) |
| { |
| int err; |
| bool ret = false; |
| |
| s5p_unset_indata(dev); |
| |
| if (!sg_is_last(dev->sg_src)) { |
| err = s5p_set_indata(dev, sg_next(dev->sg_src)); |
| if (err) |
| s5p_aes_complete(dev, err); |
| else |
| ret = true; |
| } |
| |
| return ret; |
| } |
| |
| static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id) |
| { |
| struct platform_device *pdev = dev_id; |
| struct s5p_aes_dev *dev = platform_get_drvdata(pdev); |
| bool set_dma_tx = false; |
| bool set_dma_rx = false; |
| unsigned long flags; |
| uint32_t status; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| status = SSS_READ(dev, FCINTSTAT); |
| if (status & SSS_FCINTSTAT_BRDMAINT) |
| set_dma_rx = s5p_aes_rx(dev); |
| if (status & SSS_FCINTSTAT_BTDMAINT) |
| set_dma_tx = s5p_aes_tx(dev); |
| |
| SSS_WRITE(dev, FCINTPEND, status); |
| |
| /* |
| * Writing length of DMA block (either receiving or transmitting) |
| * will start the operation immediately, so this should be done |
| * at the end (even after clearing pending interrupts to not miss the |
| * interrupt). |
| */ |
| if (set_dma_tx) |
| s5p_set_dma_outdata(dev, dev->sg_dst); |
| if (set_dma_rx) |
| s5p_set_dma_indata(dev, dev->sg_src); |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void s5p_set_aes(struct s5p_aes_dev *dev, |
| uint8_t *key, uint8_t *iv, unsigned int keylen) |
| { |
| void __iomem *keystart; |
| |
| if (iv) |
| memcpy_toio(dev->aes_ioaddr + SSS_REG_AES_IV_DATA(0), iv, 0x10); |
| |
| if (keylen == AES_KEYSIZE_256) |
| keystart = dev->aes_ioaddr + SSS_REG_AES_KEY_DATA(0); |
| else if (keylen == AES_KEYSIZE_192) |
| keystart = dev->aes_ioaddr + SSS_REG_AES_KEY_DATA(2); |
| else |
| keystart = dev->aes_ioaddr + SSS_REG_AES_KEY_DATA(4); |
| |
| memcpy_toio(keystart, key, keylen); |
| } |
| |
| static bool s5p_is_sg_aligned(struct scatterlist *sg) |
| { |
| while (sg) { |
| if (!IS_ALIGNED(sg->length, AES_BLOCK_SIZE)) |
| return false; |
| sg = sg_next(sg); |
| } |
| |
| return true; |
| } |
| |
| static int s5p_set_indata_start(struct s5p_aes_dev *dev, |
| struct ablkcipher_request *req) |
| { |
| struct scatterlist *sg; |
| int err; |
| |
| dev->sg_src_cpy = NULL; |
| sg = req->src; |
| if (!s5p_is_sg_aligned(sg)) { |
| dev_dbg(dev->dev, |
| "At least one unaligned source scatter list, making a copy\n"); |
| err = s5p_make_sg_cpy(dev, sg, &dev->sg_src_cpy); |
| if (err) |
| return err; |
| |
| sg = dev->sg_src_cpy; |
| } |
| |
| err = s5p_set_indata(dev, sg); |
| if (err) { |
| s5p_free_sg_cpy(dev, &dev->sg_src_cpy); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int s5p_set_outdata_start(struct s5p_aes_dev *dev, |
| struct ablkcipher_request *req) |
| { |
| struct scatterlist *sg; |
| int err; |
| |
| dev->sg_dst_cpy = NULL; |
| sg = req->dst; |
| if (!s5p_is_sg_aligned(sg)) { |
| dev_dbg(dev->dev, |
| "At least one unaligned dest scatter list, making a copy\n"); |
| err = s5p_make_sg_cpy(dev, sg, &dev->sg_dst_cpy); |
| if (err) |
| return err; |
| |
| sg = dev->sg_dst_cpy; |
| } |
| |
| err = s5p_set_outdata(dev, sg); |
| if (err) { |
| s5p_free_sg_cpy(dev, &dev->sg_dst_cpy); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void s5p_aes_crypt_start(struct s5p_aes_dev *dev, unsigned long mode) |
| { |
| struct ablkcipher_request *req = dev->req; |
| uint32_t aes_control; |
| unsigned long flags; |
| int err; |
| |
| aes_control = SSS_AES_KEY_CHANGE_MODE; |
| if (mode & FLAGS_AES_DECRYPT) |
| aes_control |= SSS_AES_MODE_DECRYPT; |
| |
| if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CBC) |
| aes_control |= SSS_AES_CHAIN_MODE_CBC; |
| else if ((mode & FLAGS_AES_MODE_MASK) == FLAGS_AES_CTR) |
| aes_control |= SSS_AES_CHAIN_MODE_CTR; |
| |
| if (dev->ctx->keylen == AES_KEYSIZE_192) |
| aes_control |= SSS_AES_KEY_SIZE_192; |
| else if (dev->ctx->keylen == AES_KEYSIZE_256) |
| aes_control |= SSS_AES_KEY_SIZE_256; |
| |
| aes_control |= SSS_AES_FIFO_MODE; |
| |
| /* as a variant it is possible to use byte swapping on DMA side */ |
| aes_control |= SSS_AES_BYTESWAP_DI |
| | SSS_AES_BYTESWAP_DO |
| | SSS_AES_BYTESWAP_IV |
| | SSS_AES_BYTESWAP_KEY |
| | SSS_AES_BYTESWAP_CNT; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| SSS_WRITE(dev, FCINTENCLR, |
| SSS_FCINTENCLR_BTDMAINTENCLR | SSS_FCINTENCLR_BRDMAINTENCLR); |
| SSS_WRITE(dev, FCFIFOCTRL, 0x00); |
| |
| err = s5p_set_indata_start(dev, req); |
| if (err) |
| goto indata_error; |
| |
| err = s5p_set_outdata_start(dev, req); |
| if (err) |
| goto outdata_error; |
| |
| SSS_AES_WRITE(dev, AES_CONTROL, aes_control); |
| s5p_set_aes(dev, dev->ctx->aes_key, req->info, dev->ctx->keylen); |
| |
| s5p_set_dma_indata(dev, dev->sg_src); |
| s5p_set_dma_outdata(dev, dev->sg_dst); |
| |
| SSS_WRITE(dev, FCINTENSET, |
| SSS_FCINTENSET_BTDMAINTENSET | SSS_FCINTENSET_BRDMAINTENSET); |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return; |
| |
| outdata_error: |
| s5p_unset_indata(dev); |
| |
| indata_error: |
| s5p_aes_complete(dev, err); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| |
| static void s5p_tasklet_cb(unsigned long data) |
| { |
| struct s5p_aes_dev *dev = (struct s5p_aes_dev *)data; |
| struct crypto_async_request *async_req, *backlog; |
| struct s5p_aes_reqctx *reqctx; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| backlog = crypto_get_backlog(&dev->queue); |
| async_req = crypto_dequeue_request(&dev->queue); |
| |
| if (!async_req) { |
| dev->busy = false; |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return; |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| if (backlog) |
| backlog->complete(backlog, -EINPROGRESS); |
| |
| dev->req = ablkcipher_request_cast(async_req); |
| dev->ctx = crypto_tfm_ctx(dev->req->base.tfm); |
| reqctx = ablkcipher_request_ctx(dev->req); |
| |
| s5p_aes_crypt_start(dev, reqctx->mode); |
| } |
| |
| static int s5p_aes_handle_req(struct s5p_aes_dev *dev, |
| struct ablkcipher_request *req) |
| { |
| unsigned long flags; |
| int err; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| err = ablkcipher_enqueue_request(&dev->queue, req); |
| if (dev->busy) { |
| spin_unlock_irqrestore(&dev->lock, flags); |
| goto exit; |
| } |
| dev->busy = true; |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| tasklet_schedule(&dev->tasklet); |
| |
| exit: |
| return err; |
| } |
| |
| static int s5p_aes_crypt(struct ablkcipher_request *req, unsigned long mode) |
| { |
| struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req); |
| struct s5p_aes_reqctx *reqctx = ablkcipher_request_ctx(req); |
| struct s5p_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm); |
| struct s5p_aes_dev *dev = ctx->dev; |
| |
| if (!IS_ALIGNED(req->nbytes, AES_BLOCK_SIZE)) { |
| dev_err(dev->dev, "request size is not exact amount of AES blocks\n"); |
| return -EINVAL; |
| } |
| |
| reqctx->mode = mode; |
| |
| return s5p_aes_handle_req(dev, req); |
| } |
| |
| static int s5p_aes_setkey(struct crypto_ablkcipher *cipher, |
| const uint8_t *key, unsigned int keylen) |
| { |
| struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher); |
| struct s5p_aes_ctx *ctx = crypto_tfm_ctx(tfm); |
| |
| if (keylen != AES_KEYSIZE_128 && |
| keylen != AES_KEYSIZE_192 && |
| keylen != AES_KEYSIZE_256) |
| return -EINVAL; |
| |
| memcpy(ctx->aes_key, key, keylen); |
| ctx->keylen = keylen; |
| |
| return 0; |
| } |
| |
| static int s5p_aes_ecb_encrypt(struct ablkcipher_request *req) |
| { |
| return s5p_aes_crypt(req, 0); |
| } |
| |
| static int s5p_aes_ecb_decrypt(struct ablkcipher_request *req) |
| { |
| return s5p_aes_crypt(req, FLAGS_AES_DECRYPT); |
| } |
| |
| static int s5p_aes_cbc_encrypt(struct ablkcipher_request *req) |
| { |
| return s5p_aes_crypt(req, FLAGS_AES_CBC); |
| } |
| |
| static int s5p_aes_cbc_decrypt(struct ablkcipher_request *req) |
| { |
| return s5p_aes_crypt(req, FLAGS_AES_DECRYPT | FLAGS_AES_CBC); |
| } |
| |
| static int s5p_aes_cra_init(struct crypto_tfm *tfm) |
| { |
| struct s5p_aes_ctx *ctx = crypto_tfm_ctx(tfm); |
| |
| ctx->dev = s5p_dev; |
| tfm->crt_ablkcipher.reqsize = sizeof(struct s5p_aes_reqctx); |
| |
| return 0; |
| } |
| |
| static struct crypto_alg algs[] = { |
| { |
| .cra_name = "ecb(aes)", |
| .cra_driver_name = "ecb-aes-s5p", |
| .cra_priority = 100, |
| .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | |
| CRYPTO_ALG_ASYNC | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_blocksize = AES_BLOCK_SIZE, |
| .cra_ctxsize = sizeof(struct s5p_aes_ctx), |
| .cra_alignmask = 0x0f, |
| .cra_type = &crypto_ablkcipher_type, |
| .cra_module = THIS_MODULE, |
| .cra_init = s5p_aes_cra_init, |
| .cra_u.ablkcipher = { |
| .min_keysize = AES_MIN_KEY_SIZE, |
| .max_keysize = AES_MAX_KEY_SIZE, |
| .setkey = s5p_aes_setkey, |
| .encrypt = s5p_aes_ecb_encrypt, |
| .decrypt = s5p_aes_ecb_decrypt, |
| } |
| }, |
| { |
| .cra_name = "cbc(aes)", |
| .cra_driver_name = "cbc-aes-s5p", |
| .cra_priority = 100, |
| .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | |
| CRYPTO_ALG_ASYNC | |
| CRYPTO_ALG_KERN_DRIVER_ONLY, |
| .cra_blocksize = AES_BLOCK_SIZE, |
| .cra_ctxsize = sizeof(struct s5p_aes_ctx), |
| .cra_alignmask = 0x0f, |
| .cra_type = &crypto_ablkcipher_type, |
| .cra_module = THIS_MODULE, |
| .cra_init = s5p_aes_cra_init, |
| .cra_u.ablkcipher = { |
| .min_keysize = AES_MIN_KEY_SIZE, |
| .max_keysize = AES_MAX_KEY_SIZE, |
| .ivsize = AES_BLOCK_SIZE, |
| .setkey = s5p_aes_setkey, |
| .encrypt = s5p_aes_cbc_encrypt, |
| .decrypt = s5p_aes_cbc_decrypt, |
| } |
| }, |
| }; |
| |
| static int s5p_aes_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| int i, j, err = -ENODEV; |
| struct samsung_aes_variant *variant; |
| struct s5p_aes_dev *pdata; |
| struct resource *res; |
| |
| if (s5p_dev) |
| return -EEXIST; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(pdata->ioaddr)) |
| return PTR_ERR(pdata->ioaddr); |
| |
| variant = find_s5p_sss_version(pdev); |
| |
| pdata->clk = devm_clk_get(dev, "secss"); |
| if (IS_ERR(pdata->clk)) { |
| dev_err(dev, "failed to find secss clock source\n"); |
| return -ENOENT; |
| } |
| |
| err = clk_prepare_enable(pdata->clk); |
| if (err < 0) { |
| dev_err(dev, "Enabling SSS clk failed, err %d\n", err); |
| return err; |
| } |
| |
| spin_lock_init(&pdata->lock); |
| |
| pdata->aes_ioaddr = pdata->ioaddr + variant->aes_offset; |
| |
| pdata->irq_fc = platform_get_irq(pdev, 0); |
| if (pdata->irq_fc < 0) { |
| err = pdata->irq_fc; |
| dev_warn(dev, "feed control interrupt is not available.\n"); |
| goto err_irq; |
| } |
| err = devm_request_irq(dev, pdata->irq_fc, s5p_aes_interrupt, |
| IRQF_SHARED, pdev->name, pdev); |
| if (err < 0) { |
| dev_warn(dev, "feed control interrupt is not available.\n"); |
| goto err_irq; |
| } |
| |
| pdata->busy = false; |
| pdata->variant = variant; |
| pdata->dev = dev; |
| platform_set_drvdata(pdev, pdata); |
| s5p_dev = pdata; |
| |
| tasklet_init(&pdata->tasklet, s5p_tasklet_cb, (unsigned long)pdata); |
| crypto_init_queue(&pdata->queue, CRYPTO_QUEUE_LEN); |
| |
| for (i = 0; i < ARRAY_SIZE(algs); i++) { |
| err = crypto_register_alg(&algs[i]); |
| if (err) |
| goto err_algs; |
| } |
| |
| dev_info(dev, "s5p-sss driver registered\n"); |
| |
| return 0; |
| |
| err_algs: |
| dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name, err); |
| |
| for (j = 0; j < i; j++) |
| crypto_unregister_alg(&algs[j]); |
| |
| tasklet_kill(&pdata->tasklet); |
| |
| err_irq: |
| clk_disable_unprepare(pdata->clk); |
| |
| s5p_dev = NULL; |
| |
| return err; |
| } |
| |
| static int s5p_aes_remove(struct platform_device *pdev) |
| { |
| struct s5p_aes_dev *pdata = platform_get_drvdata(pdev); |
| int i; |
| |
| if (!pdata) |
| return -ENODEV; |
| |
| for (i = 0; i < ARRAY_SIZE(algs); i++) |
| crypto_unregister_alg(&algs[i]); |
| |
| tasklet_kill(&pdata->tasklet); |
| |
| clk_disable_unprepare(pdata->clk); |
| |
| s5p_dev = NULL; |
| |
| return 0; |
| } |
| |
| static struct platform_driver s5p_aes_crypto = { |
| .probe = s5p_aes_probe, |
| .remove = s5p_aes_remove, |
| .driver = { |
| .name = "s5p-secss", |
| .of_match_table = s5p_sss_dt_match, |
| }, |
| }; |
| |
| module_platform_driver(s5p_aes_crypto); |
| |
| MODULE_DESCRIPTION("S5PV210 AES hw acceleration support."); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Vladimir Zapolskiy <vzapolskiy@gmail.com>"); |