| /* Copyright 2013-2015 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of the above-listed copyright holders nor the |
| * names of any contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef __FSL_DPBP_H |
| #define __FSL_DPBP_H |
| |
| /* Data Path Buffer Pool API |
| * Contains initialization APIs and runtime control APIs for DPBP |
| */ |
| |
| struct fsl_mc_io; |
| |
| /** |
| * dpbp_open() - Open a control session for the specified object. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @dpbp_id: DPBP unique ID |
| * @token: Returned token; use in subsequent API calls |
| * |
| * This function can be used to open a control session for an |
| * already created object; an object may have been declared in |
| * the DPL or by calling the dpbp_create function. |
| * This function returns a unique authentication token, |
| * associated with the specific object ID and the specific MC |
| * portal; this token must be used in all subsequent commands for |
| * this specific object |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_open(struct fsl_mc_io *mc_io, int dpbp_id, uint16_t *token); |
| |
| /** |
| * dpbp_close() - Close the control session of the object |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * |
| * After this function is called, no further operations are |
| * allowed on the object without opening a new control session. |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_close(struct fsl_mc_io *mc_io, uint16_t token); |
| |
| /** |
| * struct dpbp_cfg() - Structure representing DPBP configuration |
| * @options: place holder |
| */ |
| struct dpbp_cfg { |
| uint32_t options; |
| }; |
| |
| /** |
| * dpbp_create() - Create the DPBP object. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @cfg: Configuration structure |
| * @token: Returned token; use in subsequent API calls |
| * |
| * Create the DPBP object, allocate required resources and |
| * perform required initialization. |
| * |
| * The object can be created either by declaring it in the |
| * DPL file, or by calling this function. |
| * This function returns a unique authentication token, |
| * associated with the specific object ID and the specific MC |
| * portal; this token must be used in all subsequent calls to |
| * this specific object. For objects that are created using the |
| * DPL file, call dpbp_open function to get an authentication |
| * token first. |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_create(struct fsl_mc_io *mc_io, |
| const struct dpbp_cfg *cfg, |
| uint16_t *token); |
| |
| /** |
| * dpbp_destroy() - Destroy the DPBP object and release all its resources. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * |
| * Return: '0' on Success; error code otherwise. |
| */ |
| int dpbp_destroy(struct fsl_mc_io *mc_io, uint16_t token); |
| |
| /** |
| * dpbp_enable() - Enable the DPBP. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_enable(struct fsl_mc_io *mc_io, uint16_t token); |
| |
| /** |
| * dpbp_disable() - Disable the DPBP. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_disable(struct fsl_mc_io *mc_io, uint16_t token); |
| |
| /** |
| * dpbp_is_enabled() - Check if the DPBP is enabled. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @en: Returns '1' if object is enabled; '0' otherwise |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_is_enabled(struct fsl_mc_io *mc_io, uint16_t token, int *en); |
| |
| /** |
| * dpbp_reset() - Reset the DPBP, returns the object to initial state. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_reset(struct fsl_mc_io *mc_io, uint16_t token); |
| |
| /** |
| * dpbp_set_irq() - Set IRQ information for the DPBP to trigger an interrupt. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: Identifies the interrupt index to configure |
| * @irq_addr: Address that must be written to |
| * signal a message-based interrupt |
| * @irq_val: Value to write into irq_addr address |
| * @user_irq_id: A user defined number associated with this IRQ |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_set_irq(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint64_t irq_addr, |
| uint32_t irq_val, |
| int user_irq_id); |
| |
| /** |
| * dpbp_get_irq() - Get IRQ information from the DPBP. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @type: Interrupt type: 0 represents message interrupt |
| * type (both irq_addr and irq_val are valid) |
| * @irq_addr: Returned address that must be written to |
| * signal the message-based interrupt |
| * @irq_val: Value to write into irq_addr address |
| * @user_irq_id: A user defined number associated with this IRQ |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_get_irq(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| int *type, |
| uint64_t *irq_addr, |
| uint32_t *irq_val, |
| int *user_irq_id); |
| |
| /** |
| * dpbp_set_irq_enable() - Set overall interrupt state. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @en: Interrupt state - enable = 1, disable = 0 |
| * |
| * Allows GPP software to control when interrupts are generated. |
| * Each interrupt can have up to 32 causes. The enable/disable control's the |
| * overall interrupt state. if the interrupt is disabled no causes will cause |
| * an interrupt. |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_set_irq_enable(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint8_t en); |
| |
| /** |
| * dpbp_get_irq_enable() - Get overall interrupt state |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @en: Returned interrupt state - enable = 1, disable = 0 |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_get_irq_enable(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint8_t *en); |
| |
| /** |
| * dpbp_set_irq_mask() - Set interrupt mask. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @mask: Event mask to trigger interrupt; |
| * each bit: |
| * 0 = ignore event |
| * 1 = consider event for asserting IRQ |
| * |
| * Every interrupt can have up to 32 causes and the interrupt model supports |
| * masking/unmasking each cause independently |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_set_irq_mask(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint32_t mask); |
| |
| /** |
| * dpbp_get_irq_mask() - Get interrupt mask. |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @mask: Returned event mask to trigger interrupt |
| * |
| * Every interrupt can have up to 32 causes and the interrupt model supports |
| * masking/unmasking each cause independently |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_get_irq_mask(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint32_t *mask); |
| |
| /** |
| * dpbp_get_irq_status() - Get the current status of any pending interrupts. |
| * |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @status: Returned interrupts status - one bit per cause: |
| * 0 = no interrupt pending |
| * 1 = interrupt pending |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_get_irq_status(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint32_t *status); |
| |
| /** |
| * dpbp_clear_irq_status() - Clear a pending interrupt's status |
| * |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @irq_index: The interrupt index to configure |
| * @status: Bits to clear (W1C) - one bit per cause: |
| * 0 = don't change |
| * 1 = clear status bit |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_clear_irq_status(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| uint8_t irq_index, |
| uint32_t status); |
| |
| /** |
| * struct dpbp_attr - Structure representing DPBP attributes |
| * @id: DPBP object ID |
| * @version: DPBP version |
| * @bpid: Hardware buffer pool ID; should be used as an argument in |
| * acquire/release operations on buffers |
| */ |
| struct dpbp_attr { |
| int id; |
| /** |
| * struct version - Structure representing DPBP version |
| * @major: DPBP major version |
| * @minor: DPBP minor version |
| */ |
| struct { |
| uint16_t major; |
| uint16_t minor; |
| } version; |
| uint16_t bpid; |
| }; |
| |
| /** |
| * dpbp_get_attributes - Retrieve DPBP attributes. |
| * |
| * @mc_io: Pointer to MC portal's I/O object |
| * @token: Token of DPBP object |
| * @attr: Returned object's attributes |
| * |
| * Return: '0' on Success; Error code otherwise. |
| */ |
| int dpbp_get_attributes(struct fsl_mc_io *mc_io, |
| uint16_t token, |
| struct dpbp_attr *attr); |
| |
| /** @} */ |
| |
| #endif /* __FSL_DPBP_H */ |