| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _BRCM_SDH_H_ |
| #define _BRCM_SDH_H_ |
| |
| #include <linux/skbuff.h> |
| #define BRCMF_SD_ERROR_VAL 0x0001 /* Error */ |
| #define BRCMF_SD_INFO_VAL 0x0002 /* Info */ |
| extern const uint brcmf_sdio_msglevel; |
| |
| #ifdef BCMDBG |
| #define BRCMF_SD_ERROR(x) \ |
| do { \ |
| if ((brcmf_sdio_msglevel & BRCMF_SD_ERROR_VAL) && \ |
| net_ratelimit()) \ |
| printk x; \ |
| } while (0) |
| #define BRCMF_SD_INFO(x) \ |
| do { \ |
| if ((brcmf_sdio_msglevel & BRCMF_SD_INFO_VAL) && \ |
| net_ratelimit()) \ |
| printk x; \ |
| } while (0) |
| #else /* BCMDBG */ |
| #define BRCMF_SD_ERROR(x) |
| #define BRCMF_SD_INFO(x) |
| #endif /* BCMDBG */ |
| |
| #define SDIO_FUNC_0 0 |
| #define SDIO_FUNC_1 1 |
| #define SDIO_FUNC_2 2 |
| |
| #define SDIOD_FBR_SIZE 0x100 |
| |
| /* io_en */ |
| #define SDIO_FUNC_ENABLE_1 0x02 |
| #define SDIO_FUNC_ENABLE_2 0x04 |
| |
| /* io_rdys */ |
| #define SDIO_FUNC_READY_1 0x02 |
| #define SDIO_FUNC_READY_2 0x04 |
| |
| /* intr_status */ |
| #define INTR_STATUS_FUNC1 0x2 |
| #define INTR_STATUS_FUNC2 0x4 |
| |
| /* Maximum number of I/O funcs */ |
| #define SDIOD_MAX_IOFUNCS 7 |
| |
| /* forward declarations */ |
| struct brcmf_sdio_card; |
| typedef void (*brcmf_sdiocard_cb_fn_t) (void *); |
| |
| /* Attach and build an interface to the underlying SD host driver. |
| * - Allocates resources (structs, arrays, mem, OS handles, etc) needed by |
| * brcmf_sdcard. |
| * - Returns the sdio card handle and virtual address base for register access. |
| * The returned handle should be used in all subsequent calls, but the bcmsh |
| * implementation may maintain a single "default" handle (e.g. the first or |
| * most recent one) to enable single-instance implementations to pass NULL. |
| */ |
| extern struct brcmf_sdio_card *brcmf_sdcard_attach(void *cfghdl, void **regsva, |
| uint irq); |
| |
| /* Detach - freeup resources allocated in attach */ |
| extern int brcmf_sdcard_detach(struct brcmf_sdio_card *card); |
| |
| /* Query if SD device interrupts are enabled */ |
| extern bool brcmf_sdcard_intr_query(struct brcmf_sdio_card *card); |
| |
| /* Enable/disable SD interrupt */ |
| extern int brcmf_sdcard_intr_enable(struct brcmf_sdio_card *card); |
| extern int brcmf_sdcard_intr_disable(struct brcmf_sdio_card *card); |
| |
| /* Register/deregister device interrupt handler. */ |
| extern int |
| brcmf_sdcard_intr_reg(struct brcmf_sdio_card *card, brcmf_sdiocard_cb_fn_t fn, |
| void *argh); |
| |
| extern int brcmf_sdcard_intr_dereg(struct brcmf_sdio_card *card); |
| |
| /* Register a callback to be called on device removal. |
| * No-op in the case of non-removable/hardwired devices. |
| */ |
| extern int |
| brcmf_sdcard_devremove_reg(struct brcmf_sdio_card *card, |
| brcmf_sdiocard_cb_fn_t fn, |
| void *argh); |
| |
| /* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface). |
| * fn: function number |
| * addr: unmodified SDIO-space address |
| * data: data byte to write |
| * err: pointer to error code (or NULL) |
| */ |
| extern u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_card *card, uint func, |
| u32 addr, int *err); |
| extern void brcmf_sdcard_cfg_write(struct brcmf_sdio_card *card, uint func, |
| u32 addr, u8 data, int *err); |
| |
| /* Read/Write 4bytes from/to cfg space */ |
| extern u32 |
| brcmf_sdcard_cfg_read_word(struct brcmf_sdio_card *card, uint fnc_num, |
| u32 addr, int *err); |
| |
| extern void brcmf_sdcard_cfg_write_word(struct brcmf_sdio_card *card, |
| uint fnc_num, u32 addr, |
| u32 data, int *err); |
| |
| /* Read CIS content for specified function. |
| * fn: function whose CIS is being requested (0 is common CIS) |
| * cis: pointer to memory location to place results |
| * length: number of bytes to read |
| * Internally, this routine uses the values from the cis base regs (0x9-0xB) |
| * to form an SDIO-space address to read the data from. |
| */ |
| extern int brcmf_sdcard_cis_read(struct brcmf_sdio_card *card, uint func, |
| u8 *cis, uint length); |
| |
| /* Synchronous access to device (client) core registers via CMD53 to F1. |
| * addr: backplane address (i.e. >= regsva from attach) |
| * size: register width in bytes (2 or 4) |
| * data: data for register write |
| */ |
| extern u32 |
| brcmf_sdcard_reg_read(struct brcmf_sdio_card *card, u32 addr, uint size); |
| |
| extern u32 |
| brcmf_sdcard_reg_write(struct brcmf_sdio_card *card, u32 addr, uint size, |
| u32 data); |
| |
| /* Indicate if last reg read/write failed */ |
| extern bool brcmf_sdcard_regfail(struct brcmf_sdio_card *card); |
| |
| /* Buffer transfer to/from device (client) core via cmd53. |
| * fn: function number |
| * addr: backplane address (i.e. >= regsva from attach) |
| * flags: backplane width, address increment, sync/async |
| * buf: pointer to memory data buffer |
| * nbytes: number of bytes to transfer to/from buf |
| * pkt: pointer to packet associated with buf (if any) |
| * complete: callback function for command completion (async only) |
| * handle: handle for completion callback (first arg in callback) |
| * Returns 0 or error code. |
| * NOTE: Async operation is not currently supported. |
| */ |
| typedef void (*brcmf_sdio_cmplt_fn_t) |
| (void *handle, int status, bool sync_waiting); |
| extern int |
| brcmf_sdcard_send_buf(struct brcmf_sdio_card *card, u32 addr, uint fn, |
| uint flags, u8 *buf, uint nbytes, void *pkt, |
| brcmf_sdio_cmplt_fn_t complete, void *handle); |
| extern int |
| brcmf_sdcard_recv_buf(struct brcmf_sdio_card *card, u32 addr, uint fn, |
| uint flags, u8 *buf, uint nbytes, struct sk_buff *pkt, |
| brcmf_sdio_cmplt_fn_t complete, void *handle); |
| |
| /* Flags bits */ |
| #define SDIO_REQ_4BYTE 0x1 /* Four-byte target (backplane) width (vs. two-byte) */ |
| #define SDIO_REQ_FIXED 0x2 /* Fixed address (FIFO) (vs. incrementing address) */ |
| #define SDIO_REQ_ASYNC 0x4 /* Async request (vs. sync request) */ |
| |
| /* Pending (non-error) return code */ |
| #define BCME_PENDING 1 |
| |
| /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only). |
| * rw: read or write (0/1) |
| * addr: direct SDIO address |
| * buf: pointer to memory data buffer |
| * nbytes: number of bytes to transfer to/from buf |
| * Returns 0 or error code. |
| */ |
| extern int brcmf_sdcard_rwdata(struct brcmf_sdio_card *card, uint rw, u32 addr, |
| u8 *buf, uint nbytes); |
| |
| /* Issue an abort to the specified function */ |
| extern int brcmf_sdcard_abort(struct brcmf_sdio_card *card, uint fn); |
| |
| /* Start SDIO Host Controller communication */ |
| extern int brcmf_sdcard_start(struct brcmf_sdio_card *card, int stage); |
| |
| /* Stop SDIO Host Controller communication */ |
| extern int brcmf_sdcard_stop(struct brcmf_sdio_card *card); |
| |
| /* Returns the "Device ID" of target device on the SDIO bus. */ |
| extern int brcmf_sdcard_query_device(struct brcmf_sdio_card *card); |
| |
| /* Returns the number of IO functions reported by the device */ |
| extern uint brcmf_sdcard_query_iofnum(struct brcmf_sdio_card *card); |
| |
| /* Miscellaneous knob tweaker. */ |
| extern int brcmf_sdcard_iovar_op(struct brcmf_sdio_card *card, const char *name, |
| void *params, int plen, void *arg, int len, |
| bool set); |
| |
| /* Reset and reinitialize the device */ |
| extern int brcmf_sdcard_reset(struct brcmf_sdio_card *card); |
| |
| /* helper functions */ |
| |
| extern void *brcmf_sdcard_get_sdioh(struct brcmf_sdio_card *card); |
| |
| /* callback functions */ |
| struct brcmf_sdioh_driver { |
| /* attach to device */ |
| void *(*attach) (u16 vend_id, u16 dev_id, u16 bus, u16 slot, |
| u16 func, uint bustype, void *regsva, void *param); |
| /* detach from device */ |
| void (*detach) (void *ch); |
| }; |
| |
| struct sdioh_info; |
| |
| /* platform specific/high level functions */ |
| extern int brcmf_sdio_function_init(void); |
| extern int brcmf_sdio_register(struct brcmf_sdioh_driver *driver); |
| extern void brcmf_sdio_unregister(void); |
| extern bool brcmf_sdio_chipmatch(u16 vendor, u16 device); |
| extern void brcmf_sdio_device_remove(void *card); |
| extern void brcmf_sdio_function_cleanup(void); |
| |
| extern void brcmf_sdioh_dev_intr_off(struct sdioh_info *sd); |
| extern void brcmf_sdioh_dev_intr_on(struct sdioh_info *sd); |
| extern int brcmf_sdio_probe(struct device *dev); |
| extern int brcmf_sdio_remove(struct device *dev); |
| |
| /* Function to pass device-status bits to DHD. */ |
| extern u32 brcmf_sdcard_get_dstatus(struct brcmf_sdio_card *card); |
| |
| /* Function to return current window addr */ |
| extern u32 brcmf_sdcard_cur_sbwad(struct brcmf_sdio_card *card); |
| |
| /* Function to pass chipid and rev to lower layers for controlling pr's */ |
| extern void brcmf_sdcard_chipinfo(struct brcmf_sdio_card *card, u32 chip, |
| u32 chiprev); |
| |
| #endif /* _BRCM_SDH_H_ */ |