acer-wmi: Remove wireless and bluetooth sysfs entries
These are now replaced by the rfkill interface.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 69b5dd4..2b3a6b5 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -1,7 +1,7 @@
Acer Laptop WMI Extras Driver
http://code.google.com/p/aceracpi
-Version 0.1
-9th February 2008
+Version 0.2
+18th August 2008
Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
@@ -87,17 +87,7 @@
ever wish to remove the card, or swap it out at some point, please get in touch
with me, as we may well be able to gain some data on wireless card detection.
-To read the status of the wireless radio (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the wireless radio:
-echo 1 > /sys/devices/platform/acer-wmi/wireless
-
-To disable the wireless radio:
-echo 0 > /sys/devices/platform/acer-wmi/wireless
-
-To set the state of the wireless radio when loading acer-wmi, pass:
-wireless=X (where X is 0 or 1)
+The wireless radio is exposed through rfkill.
Bluetooth
*********
@@ -117,17 +107,7 @@
module off the internet that is compatible with your laptop and fit it, then
it will work just fine with acer-wmi.
-To read the status of the bluetooth module (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the bluetooth module:
-echo 1 > /sys/devices/platform/acer-wmi/bluetooth
-
-To disable the bluetooth module:
-echo 0 > /sys/devices/platform/acer-wmi/bluetooth
-
-To set the state of the bluetooth module when loading acer-wmi, pass:
-bluetooth=X (where X is 0 or 1)
+Bluetooth is exposed through rfkill.
3G
**
diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e3e11e8..8708d31 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -125,21 +125,15 @@
static int max_brightness = 0xF;
-static int wireless = -1;
-static int bluetooth = -1;
static int mailled = -1;
static int brightness = -1;
static int threeg = -1;
static int force_series;
module_param(mailled, int, 0444);
-module_param(wireless, int, 0444);
-module_param(bluetooth, int, 0444);
module_param(brightness, int, 0444);
module_param(threeg, int, 0444);
module_param(force_series, int, 0444);
-MODULE_PARM_DESC(wireless, "Set initial state of Wireless hardware");
-MODULE_PARM_DESC(bluetooth, "Set initial state of Bluetooth hardware");
MODULE_PARM_DESC(mailled, "Set initial state of Mail LED");
MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness");
MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware");
@@ -147,8 +141,6 @@
struct acer_data {
int mailled;
- int wireless;
- int bluetooth;
int threeg;
int brightness;
};
@@ -851,8 +843,6 @@
* capability isn't available on the given interface
*/
set_u32(mailled, ACER_CAP_MAILLED);
- set_u32(wireless, ACER_CAP_WIRELESS);
- set_u32(bluetooth, ACER_CAP_BLUETOOTH);
set_u32(threeg, ACER_CAP_THREEG);
set_u32(brightness, ACER_CAP_BRIGHTNESS);
}
@@ -1057,40 +1047,30 @@
}
/*
- * Read/ write bool sysfs macro
+ * sysfs interface
*/
-#define show_set_bool(value, cap) \
-static ssize_t \
-show_bool_##value(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
+static ssize_t show_bool_threeg(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
u32 result; \
- acpi_status status = get_u32(&result, cap); \
- if (ACPI_SUCCESS(status)) \
- return sprintf(buf, "%u\n", result); \
- return sprintf(buf, "Read error\n"); \
-} \
-\
-static ssize_t \
-set_bool_##value(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- u32 tmp = simple_strtoul(buf, NULL, 10); \
- acpi_status status = set_u32(tmp, cap); \
- if (ACPI_FAILURE(status)) \
- return -EINVAL; \
- return count; \
-} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
- show_bool_##value, set_bool_##value);
+ acpi_status status = get_u32(&result, ACER_CAP_THREEG);
+ if (ACPI_SUCCESS(status))
+ return sprintf(buf, "%u\n", result);
+ return sprintf(buf, "Read error\n");
+}
-show_set_bool(wireless, ACER_CAP_WIRELESS);
-show_set_bool(bluetooth, ACER_CAP_BLUETOOTH);
-show_set_bool(threeg, ACER_CAP_THREEG);
+static ssize_t set_bool_threeg(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ u32 tmp = simple_strtoul(buf, NULL, 10);
+ acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+ return count;
+}
+static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+ set_bool_threeg);
-/*
- * Read interface sysfs macro
- */
static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -1180,16 +1160,6 @@
if (!data)
return -ENOMEM;
- if (has_cap(ACER_CAP_WIRELESS)) {
- get_u32(&value, ACER_CAP_WIRELESS);
- data->wireless = value;
- }
-
- if (has_cap(ACER_CAP_BLUETOOTH)) {
- get_u32(&value, ACER_CAP_BLUETOOTH);
- data->bluetooth = value;
- }
-
if (has_cap(ACER_CAP_MAILLED)) {
get_u32(&value, ACER_CAP_MAILLED);
data->mailled = value;
@@ -1210,15 +1180,6 @@
if (!data)
return -ENOMEM;
- if (has_cap(ACER_CAP_WIRELESS))
- set_u32(data->wireless, ACER_CAP_WIRELESS);
-
- if (has_cap(ACER_CAP_BLUETOOTH))
- set_u32(data->bluetooth, ACER_CAP_BLUETOOTH);
-
- if (has_cap(ACER_CAP_THREEG))
- set_u32(data->threeg, ACER_CAP_THREEG);
-
if (has_cap(ACER_CAP_MAILLED))
set_u32(data->mailled, ACER_CAP_MAILLED);
@@ -1243,12 +1204,6 @@
static int remove_sysfs(struct platform_device *device)
{
- if (has_cap(ACER_CAP_WIRELESS))
- device_remove_file(&device->dev, &dev_attr_wireless);
-
- if (has_cap(ACER_CAP_BLUETOOTH))
- device_remove_file(&device->dev, &dev_attr_bluetooth);
-
if (has_cap(ACER_CAP_THREEG))
device_remove_file(&device->dev, &dev_attr_threeg);
@@ -1261,20 +1216,6 @@
{
int retval = -ENOMEM;
- if (has_cap(ACER_CAP_WIRELESS)) {
- retval = device_create_file(&acer_platform_device->dev,
- &dev_attr_wireless);
- if (retval)
- goto error_sysfs;
- }
-
- if (has_cap(ACER_CAP_BLUETOOTH)) {
- retval = device_create_file(&acer_platform_device->dev,
- &dev_attr_bluetooth);
- if (retval)
- goto error_sysfs;
- }
-
if (has_cap(ACER_CAP_THREEG)) {
retval = device_create_file(&acer_platform_device->dev,
&dev_attr_threeg);