| menu "Platform selection" |
| |
| config ARCH_SUNXI |
| bool "Allwinner sunxi 64-bit SoC Family" |
| select GENERIC_IRQ_CHIP |
| select PINCTRL |
| select PINCTRL_SUN50I_A64 |
| help |
| This enables support for Allwinner sunxi based SoCs like the A64. |
| |
| config ARCH_ALPINE |
| bool "Annapurna Labs Alpine platform" |
| select ALPINE_MSI if PCI |
| help |
| This enables support for the Annapurna Labs Alpine |
| Soc family. |
| |
| config ARCH_BCM2835 |
| bool "Broadcom BCM2835 family" |
| select CLKSRC_OF |
| select GPIOLIB |
| select PINCTRL |
| select PINCTRL_BCM2835 |
| select ARM_AMBA |
| select ARM_TIMER_SP804 |
| select HAVE_ARM_ARCH_TIMER |
| help |
| This enables support for the Broadcom BCM2837 SoC. |
| This SoC is used in the Raspberry Pi 3 device. |
| |
| config ARCH_BCM_IPROC |
| bool "Broadcom iProc SoC Family" |
| select COMMON_CLK_IPROC |
| select GPIOLIB |
| select PINCTRL |
| help |
| This enables support for Broadcom iProc based SoCs |
| |
| config ARCH_BERLIN |
| bool "Marvell Berlin SoC Family" |
| select DW_APB_ICTL |
| select GPIOLIB |
| select PINCTRL |
| help |
| This enables support for Marvell Berlin SoC Family |
| |
| config ARCH_BRCMSTB |
| bool "Broadcom Set-Top-Box SoCs" |
| select BRCMSTB_L2_IRQ |
| select GENERIC_IRQ_CHIP |
| help |
| This enables support for Broadcom's ARMv8 Set Top Box SoCs |
| |
| config ARCH_EXYNOS |
| bool "ARMv8 based Samsung Exynos SoC family" |
| select COMMON_CLK_SAMSUNG |
| select HAVE_S3C2410_WATCHDOG if WATCHDOG |
| select HAVE_S3C_RTC if RTC_CLASS |
| select PINCTRL |
| select PINCTRL_EXYNOS |
| select SOC_SAMSUNG |
| help |
| This enables support for ARMv8 based Samsung Exynos SoC family. |
| |
| config ARCH_LAYERSCAPE |
| bool "ARMv8 based Freescale Layerscape SoC family" |
| select EDAC_SUPPORT |
| help |
| This enables support for the Freescale Layerscape SoC family. |
| |
| config ARCH_LG1K |
| bool "LG Electronics LG1K SoC Family" |
| help |
| This enables support for LG Electronics LG1K SoC Family |
| |
| config ARCH_HISI |
| bool "Hisilicon SoC Family" |
| select ARM_TIMER_SP804 |
| select HISILICON_IRQ_MBIGEN if PCI |
| select PINCTRL |
| help |
| This enables support for Hisilicon ARMv8 SoC family |
| |
| config ARCH_MEDIATEK |
| bool "Mediatek MT65xx & MT81xx ARMv8 SoC" |
| select ARM_GIC |
| select PINCTRL |
| select MTK_TIMER |
| help |
| Support for Mediatek MT65xx & MT81xx ARMv8 SoCs |
| |
| config ARCH_MESON |
| bool "Amlogic Platforms" |
| select PINCTRL |
| select PINCTRL_MESON |
| select COMMON_CLK_AMLOGIC |
| select COMMON_CLK_GXBB |
| help |
| This enables support for the Amlogic S905 SoCs. |
| |
| config ARCH_MVEBU |
| bool "Marvell EBU SoC Family" |
| select ARMADA_AP806_SYSCON |
| select ARMADA_CP110_SYSCON |
| select ARMADA_37XX_CLK |
| select MVEBU_ODMI |
| select MVEBU_PIC |
| help |
| This enables support for Marvell EBU familly, including: |
| - Armada 3700 SoC Family |
| - Armada 7K SoC Family |
| - Armada 8K SoC Family |
| |
| config ARCH_QCOM |
| bool "Qualcomm Platforms" |
| select PINCTRL |
| select CLKDEV_LOOKUP |
| select HAVE_CLK |
| select HAVE_CLK_PREPARE |
| select SOC_BUS |
| select PM_OPP |
| select MFD_CORE |
| select SND_SOC_COMPRESS |
| help |
| This enables support for the ARMv8 based Qualcomm chipsets. |
| |
| config ARCH_SDM845 |
| bool "Enable Support for Qualcomm Technologies Inc. SDM845" |
| depends on ARCH_QCOM |
| select COMMON_CLK |
| select COMMON_CLK_QCOM |
| select QCOM_GDSC |
| help |
| This enables support for the SDM845 chipset. If you do not |
| wish to build a kernel that runs on this chipset, say 'N' here. |
| |
| config ARCH_SDM670 |
| bool "Enable Support for Qualcomm Technologies Inc. SDM670" |
| depends on ARCH_QCOM |
| select COMMON_CLK |
| select COMMON_CLK_QCOM |
| select QCOM_GDSC |
| help |
| This enables support for the SDM670 chipset. If you do not |
| wish to build a kernel that runs on this chipset, say 'N' here. |
| |
| config ARCH_MSM8953 |
| bool "Enable Support for Qualcomm Technologies Inc. MSM8953" |
| depends on ARCH_QCOM |
| select CPU_FREQ_QCOM |
| select COMMON_CLK_MSM |
| help |
| This enables support for the MSM8953 chipset. If you do not |
| wish to build a kernel that runs on this chipset, say 'N' here. |
| |
| config ARCH_SDM450 |
| bool "Enable Support for Qualcomm Technologies Inc. SDM450" |
| depends on ARCH_QCOM |
| select CPU_FREQ_QCOM |
| select COMMON_CLK_MSM |
| help |
| This enables support for the sdm450 chipset. If you do not |
| wish to build a kernel that runs on this chipset, say 'N' here. |
| |
| config ARCH_SDM632 |
| bool "Enable Support for Qualcomm Technologies Inc. SDM632" |
| depends on ARCH_QCOM |
| select CPU_FREQ_QCOM |
| select COMMON_CLK_MSM |
| help |
| This enables support for the sdm632 chipset. If you do not |
| wish to build a kernel that runs on this chipset, say 'N' here. |
| |
| config ARCH_ROCKCHIP |
| bool "Rockchip Platforms" |
| select ARCH_HAS_RESET_CONTROLLER |
| select GPIOLIB |
| select PINCTRL |
| select PINCTRL_ROCKCHIP |
| select ROCKCHIP_TIMER |
| help |
| This enables support for the ARMv8 based Rockchip chipsets, |
| like the RK3368. |
| |
| config ARCH_SEATTLE |
| bool "AMD Seattle SoC Family" |
| help |
| This enables support for AMD Seattle SOC Family |
| |
| config ARCH_SHMOBILE |
| bool |
| |
| config ARCH_RENESAS |
| bool "Renesas SoC Platforms" |
| select ARCH_SHMOBILE |
| select PINCTRL |
| select PM |
| select PM_GENERIC_DOMAINS |
| select RENESAS_IRQC |
| help |
| This enables support for the ARMv8 based Renesas SoCs. |
| |
| config ARCH_R8A7795 |
| bool "Renesas R-Car H3 SoC Platform" |
| depends on ARCH_RENESAS |
| help |
| This enables support for the Renesas R-Car H3 SoC. |
| |
| config ARCH_R8A7796 |
| bool "Renesas R-Car M3-W SoC Platform" |
| depends on ARCH_RENESAS |
| help |
| This enables support for the Renesas R-Car M3-W SoC. |
| |
| config ARCH_STRATIX10 |
| bool "Altera's Stratix 10 SoCFPGA Family" |
| help |
| This enables support for Altera's Stratix 10 SoCFPGA Family. |
| |
| config ARCH_TEGRA |
| bool "NVIDIA Tegra SoC Family" |
| select ARCH_HAS_RESET_CONTROLLER |
| select CLKDEV_LOOKUP |
| select CLKSRC_MMIO |
| select CLKSRC_OF |
| select GENERIC_CLOCKEVENTS |
| select GPIOLIB |
| select PINCTRL |
| select PM |
| select PM_GENERIC_DOMAINS |
| select RESET_CONTROLLER |
| help |
| This enables support for the NVIDIA Tegra SoC family. |
| |
| config ARCH_SPRD |
| bool "Spreadtrum SoC platform" |
| help |
| Support for Spreadtrum ARM based SoCs |
| |
| config ARCH_THUNDER |
| bool "Cavium Inc. Thunder SoC Family" |
| help |
| This enables support for Cavium's Thunder Family of SoCs. |
| |
| config ARCH_UNIPHIER |
| bool "Socionext UniPhier SoC Family" |
| select ARCH_HAS_RESET_CONTROLLER |
| select PINCTRL |
| help |
| This enables support for Socionext UniPhier SoC family. |
| |
| config ARCH_VEXPRESS |
| bool "ARMv8 software model (Versatile Express)" |
| select COMMON_CLK_VERSATILE |
| select GPIOLIB |
| select PM |
| select PM_GENERIC_DOMAINS |
| select POWER_RESET_VEXPRESS |
| select VEXPRESS_CONFIG |
| help |
| This enables support for the ARMv8 software model (Versatile |
| Express). |
| |
| config ARCH_VULCAN |
| bool "Broadcom Vulcan SOC Family" |
| select GPIOLIB |
| help |
| This enables support for Broadcom Vulcan SoC Family |
| |
| config ARCH_XGENE |
| bool "AppliedMicro X-Gene SOC Family" |
| help |
| This enables support for AppliedMicro X-Gene SOC Family |
| |
| config ARCH_ZX |
| bool "ZTE ZX SoC Family" |
| help |
| This enables support for ZTE ZX SoC Family |
| |
| config ARCH_ZYNQMP |
| bool "Xilinx ZynqMP Family" |
| help |
| This enables support for Xilinx ZynqMP Family |
| |
| endmenu |