| /***************************************************************************** |
| * sdla_x25.c WANPIPE(tm) Multiprotocol WAN Link Driver. X.25 module. |
| * |
| * Author: Nenad Corbic <ncorbic@sangoma.com> |
| * |
| * Copyright: (c) 1995-2001 Sangoma Technologies Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * ============================================================================ |
| * Apr 03, 2001 Nenad Corbic o Fixed the rx_skb=NULL bug in x25 in rx_intr(). |
| * Dec 26, 2000 Nenad Corbic o Added a new polling routine, that uses |
| * a kernel timer (more efficient). |
| * Dec 25, 2000 Nenad Corbic o Updated for 2.4.X kernel |
| * Jul 26, 2000 Nenad Corbic o Increased the local packet buffering |
| * for API to 4096+header_size. |
| * Jul 17, 2000 Nenad Corbic o Fixed the x25 startup bug. Enable |
| * communications only after all interfaces |
| * come up. HIGH SVC/PVC is used to calculate |
| * the number of channels. |
| * Enable protocol only after all interfaces |
| * are enabled. |
| * Jul 10, 2000 Nenad Corbic o Fixed the M_BIT bug. |
| * Apr 25, 2000 Nenad Corbic o Pass Modem messages to the API. |
| * Disable idle timeout in X25 API. |
| * Apr 14, 2000 Nenad Corbic o Fixed: Large LCN number support. |
| * Maximum LCN number is 4095. |
| * Maximum number of X25 channels is 255. |
| * Apr 06, 2000 Nenad Corbic o Added SMP Support. |
| * Mar 29, 2000 Nenad Corbic o Added support for S514 PCI Card |
| * Mar 23, 2000 Nenad Corbic o Improved task queue, BH handling. |
| * Mar 14, 2000 Nenad Corbic o Updated Protocol Violation handling |
| * routines. Bug Fix. |
| * Mar 10, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery. |
| * Mar 09, 2000 Nenad Corbic o Fixed the auto HDLC bug. |
| * Mar 08, 2000 Nenad Corbic o Fixed LAPB HDLC startup problems. |
| * Application must bring the link up |
| * before tx/rx, and bring the |
| * link down on close(). |
| * Mar 06, 2000 Nenad Corbic o Added an option for logging call setup |
| * information. |
| * Feb 29, 2000 Nenad Corbic o Added support for LAPB HDLC API |
| * Feb 25, 2000 Nenad Corbic o Fixed the modem failure handling. |
| * No Modem OOB message will be passed |
| * to the user. |
| * Feb 21, 2000 Nenad Corbic o Added Xpipemon Debug Support |
| * Dec 30, 1999 Nenad Corbic o Socket based X25API |
| * Sep 17, 1998 Jaspreet Singh o Updates for 2.2.X kernel |
| * Mar 15, 1998 Alan Cox o 2.1.x porting |
| * Dec 19, 1997 Jaspreet Singh o Added multi-channel IPX support |
| * Nov 27, 1997 Jaspreet Singh o Added protection against enabling of irqs |
| * when they are disabled. |
| * Nov 17, 1997 Farhan Thawar o Added IPX support |
| * o Changed if_send() to now buffer packets when |
| * the board is busy |
| * o Removed queueing of packets via the polling |
| * routing |
| * o Changed if_send() critical flags to properly |
| * handle race conditions |
| * Nov 06, 1997 Farhan Thawar o Added support for SVC timeouts |
| * o Changed PVC encapsulation to ETH_P_IP |
| * Jul 21, 1997 Jaspreet Singh o Fixed freeing up of buffers using kfree() |
| * when packets are received. |
| * Mar 11, 1997 Farhan Thawar Version 3.1.1 |
| * o added support for V35 |
| * o changed if_send() to return 0 if |
| * wandev.critical() is true |
| * o free socket buffer in if_send() if |
| * returning 0 |
| * o added support for single '@' address to |
| * accept all incoming calls |
| * o fixed bug in set_chan_state() to disconnect |
| * Jan 15, 1997 Gene Kozin Version 3.1.0 |
| * o implemented exec() entry point |
| * Jan 07, 1997 Gene Kozin Initial version. |
| *****************************************************************************/ |
| |
| /*====================================================== |
| * Includes |
| *=====================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> /* printk(), and other useful stuff */ |
| #include <linux/stddef.h> /* offsetof(), etc. */ |
| #include <linux/errno.h> /* return codes */ |
| #include <linux/string.h> /* inline memset(), etc. */ |
| #include <linux/ctype.h> |
| #include <linux/slab.h> /* kmalloc(), kfree() */ |
| #include <linux/wanrouter.h> /* WAN router definitions */ |
| #include <linux/wanpipe.h> /* WANPIPE common user API definitions */ |
| #include <linux/workqueue.h> |
| #include <asm/byteorder.h> /* htons(), etc. */ |
| #include <asm/atomic.h> |
| #include <linux/delay.h> /* Experimental delay */ |
| |
| #include <asm/uaccess.h> |
| |
| #include <linux/if.h> |
| #include <linux/if_arp.h> |
| #include <linux/sdla_x25.h> /* X.25 firmware API definitions */ |
| #include <linux/if_wanpipe_common.h> |
| #include <linux/if_wanpipe.h> |
| |
| |
| /*====================================================== |
| * Defines & Macros |
| *=====================================================*/ |
| |
| |
| #define CMD_OK 0 /* normal firmware return code */ |
| #define CMD_TIMEOUT 0xFF /* firmware command timed out */ |
| #define MAX_CMD_RETRY 10 /* max number of firmware retries */ |
| |
| #define X25_CHAN_MTU 4096 /* unfragmented logical channel MTU */ |
| #define X25_HRDHDR_SZ 7 /* max encapsulation header size */ |
| #define X25_CONCT_TMOUT (90*HZ) /* link connection timeout */ |
| #define X25_RECON_TMOUT (10*HZ) /* link connection timeout */ |
| #define CONNECT_TIMEOUT (90*HZ) /* link connection timeout */ |
| #define HOLD_DOWN_TIME (30*HZ) /* link hold down time */ |
| #define MAX_BH_BUFF 10 |
| #define M_BIT 0x01 |
| |
| //#define PRINT_DEBUG 1 |
| #ifdef PRINT_DEBUG |
| #define DBG_PRINTK(format, a...) printk(format, ## a) |
| #else |
| #define DBG_PRINTK(format, a...) |
| #endif |
| |
| #define TMR_INT_ENABLED_POLL_ACTIVE 0x01 |
| #define TMR_INT_ENABLED_POLL_CONNECT_ON 0x02 |
| #define TMR_INT_ENABLED_POLL_CONNECT_OFF 0x04 |
| #define TMR_INT_ENABLED_POLL_DISCONNECT 0x08 |
| #define TMR_INT_ENABLED_CMD_EXEC 0x10 |
| #define TMR_INT_ENABLED_UPDATE 0x20 |
| #define TMR_INT_ENABLED_UDP_PKT 0x40 |
| |
| #define MAX_X25_ADDR_SIZE 16 |
| #define MAX_X25_DATA_SIZE 129 |
| #define MAX_X25_FACL_SIZE 110 |
| |
| #define TRY_CMD_AGAIN 2 |
| #define DELAY_RESULT 1 |
| #define RETURN_RESULT 0 |
| |
| #define DCD(x) (x & 0x03 ? "HIGH" : "LOW") |
| #define CTS(x) (x & 0x05 ? "HIGH" : "LOW") |
| |
| |
| /* Driver will not write log messages about |
| * modem status if defined.*/ |
| #define MODEM_NOT_LOG 1 |
| |
| /*==================================================== |
| * For IPXWAN |
| *===================================================*/ |
| |
| #define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b))) |
| |
| |
| /*==================================================== |
| * MEMORY DEBUGGING FUNCTION |
| *==================================================== |
| |
| #define KMEM_SAFETYZONE 8 |
| |
| static void * dbg_kmalloc(unsigned int size, int prio, int line) { |
| int i = 0; |
| void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio); |
| char * c1 = v; |
| c1 += sizeof(unsigned int); |
| *((unsigned int *)v) = size; |
| |
| for (i = 0; i < KMEM_SAFETYZONE; i++) { |
| c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D'; |
| c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F'; |
| c1 += 8; |
| } |
| c1 += size; |
| for (i = 0; i < KMEM_SAFETYZONE; i++) { |
| c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G'; |
| c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L'; |
| c1 += 8; |
| } |
| v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8; |
| printk(KERN_INFO "line %d kmalloc(%d,%d) = %p\n",line,size,prio,v); |
| return v; |
| } |
| static void dbg_kfree(void * v, int line) { |
| unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8)); |
| unsigned int size = *sp; |
| char * c1 = ((char *)v) - KMEM_SAFETYZONE*8; |
| int i = 0; |
| for (i = 0; i < KMEM_SAFETYZONE; i++) { |
| if ( c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D' |
| || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') { |
| printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v); |
| printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, |
| c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); |
| } |
| c1 += 8; |
| } |
| c1 += size; |
| for (i = 0; i < KMEM_SAFETYZONE; i++) { |
| if ( c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G' |
| || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L' |
| ) { |
| printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v); |
| printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8, |
| c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] ); |
| } |
| c1 += 8; |
| } |
| printk(KERN_INFO "line %d kfree(%p)\n",line,v); |
| v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8); |
| kfree(v); |
| } |
| |
| #define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__) |
| #define kfree(x) dbg_kfree(x,__LINE__) |
| |
| ==============================================================*/ |
| |
| |
| |
| /*=============================================== |
| * Data Structures |
| *===============================================*/ |
| |
| |
| /*======================================================== |
| * Name: x25_channel |
| * |
| * Purpose: To hold private informaton for each |
| * logical channel. |
| * |
| * Rationale: Per-channel debugging is possible if each |
| * channel has its own private area. |
| * |
| * Assumptions: |
| * |
| * Description: This is an extention of the struct net_device |
| * we create for each network interface to keep |
| * the rest of X.25 channel-specific data. |
| * |
| * Construct: Typedef |
| */ |
| typedef struct x25_channel |
| { |
| wanpipe_common_t common; /* common area for x25api and socket */ |
| char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ |
| char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ |
| unsigned tx_pkt_size; |
| unsigned short protocol; /* ethertype, 0 - multiplexed */ |
| char drop_sequence; /* mark sequence for dropping */ |
| unsigned long state_tick; /* time of the last state change */ |
| unsigned idle_timeout; /* sec, before disconnecting */ |
| unsigned long i_timeout_sofar; /* # of sec's we've been idle */ |
| unsigned hold_timeout; /* sec, before re-connecting */ |
| unsigned long tick_counter; /* counter for transmit time out */ |
| char devtint; /* Weather we should dev_tint() */ |
| struct sk_buff* rx_skb; /* receive socket buffer */ |
| struct sk_buff* tx_skb; /* transmit socket buffer */ |
| |
| bh_data_t *bh_head; /* Circular buffer for x25api_bh */ |
| unsigned long tq_working; |
| volatile int bh_write; |
| volatile int bh_read; |
| atomic_t bh_buff_used; |
| |
| sdla_t* card; /* -> owner */ |
| struct net_device *dev; /* -> bound devce */ |
| |
| int ch_idx; |
| unsigned char enable_IPX; |
| unsigned long network_number; |
| struct net_device_stats ifstats; /* interface statistics */ |
| unsigned short transmit_length; |
| unsigned short tx_offset; |
| char transmit_buffer[X25_CHAN_MTU+sizeof(x25api_hdr_t)]; |
| |
| if_send_stat_t if_send_stat; |
| rx_intr_stat_t rx_intr_stat; |
| pipe_mgmt_stat_t pipe_mgmt_stat; |
| |
| unsigned long router_start_time; /* Router start time in seconds */ |
| unsigned long router_up_time; |
| |
| } x25_channel_t; |
| |
| /* FIXME Take this out */ |
| |
| #ifdef NEX_OLD_CALL_INFO |
| typedef struct x25_call_info |
| { |
| char dest[17]; PACKED;/* ASCIIZ destination address */ |
| char src[17]; PACKED;/* ASCIIZ source address */ |
| char nuser; PACKED;/* number of user data bytes */ |
| unsigned char user[127]; PACKED;/* user data */ |
| char nfacil; PACKED;/* number of facilities */ |
| struct |
| { |
| unsigned char code; PACKED; |
| unsigned char parm; PACKED; |
| } facil[64]; /* facilities */ |
| } x25_call_info_t; |
| #else |
| typedef struct x25_call_info |
| { |
| char dest[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ destination address */ |
| char src[MAX_X25_ADDR_SIZE] PACKED;/* ASCIIZ source address */ |
| unsigned char nuser PACKED; |
| unsigned char user[MAX_X25_DATA_SIZE] PACKED;/* user data */ |
| unsigned char nfacil PACKED; |
| unsigned char facil[MAX_X25_FACL_SIZE] PACKED; |
| unsigned short lcn PACKED; |
| } x25_call_info_t; |
| #endif |
| |
| |
| |
| /*=============================================== |
| * Private Function Prototypes |
| *==============================================*/ |
| |
| |
| /*================================================= |
| * WAN link driver entry points. These are |
| * called by the WAN router module. |
| */ |
| static int update(struct wan_device* wandev); |
| static int new_if(struct wan_device* wandev, struct net_device* dev, |
| wanif_conf_t* conf); |
| static int del_if(struct wan_device* wandev, struct net_device* dev); |
| static void disable_comm (sdla_t* card); |
| static void disable_comm_shutdown(sdla_t *card); |
| |
| |
| |
| /*================================================= |
| * WANPIPE-specific entry points |
| */ |
| static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data); |
| static void x25api_bh(struct net_device *dev); |
| static int x25api_bh_cleanup(struct net_device *dev); |
| static int bh_enqueue(struct net_device *dev, struct sk_buff *skb); |
| |
| |
| /*================================================= |
| * Network device interface |
| */ |
| static int if_init(struct net_device* dev); |
| static int if_open(struct net_device* dev); |
| static int if_close(struct net_device* dev); |
| static int if_header(struct sk_buff* skb, struct net_device* dev, |
| unsigned short type, void* daddr, void* saddr, unsigned len); |
| static int if_rebuild_hdr (struct sk_buff* skb); |
| static int if_send(struct sk_buff* skb, struct net_device* dev); |
| static struct net_device_stats *if_stats(struct net_device* dev); |
| |
| static void if_tx_timeout(struct net_device *dev); |
| |
| /*================================================= |
| * Interrupt handlers |
| */ |
| static void wpx_isr (sdla_t *); |
| static void rx_intr (sdla_t *); |
| static void tx_intr (sdla_t *); |
| static void status_intr (sdla_t *); |
| static void event_intr (sdla_t *); |
| static void spur_intr (sdla_t *); |
| static void timer_intr (sdla_t *); |
| |
| static int tx_intr_send(sdla_t *card, struct net_device *dev); |
| static struct net_device *move_dev_to_next(sdla_t *card, |
| struct net_device *dev); |
| |
| /*================================================= |
| * Background polling routines |
| */ |
| static void wpx_poll (sdla_t* card); |
| static void poll_disconnected (sdla_t* card); |
| static void poll_connecting (sdla_t* card); |
| static void poll_active (sdla_t* card); |
| static void trigger_x25_poll(sdla_t *card); |
| static void x25_timer_routine(unsigned long data); |
| |
| |
| |
| /*================================================= |
| * X.25 firmware interface functions |
| */ |
| static int x25_get_version (sdla_t* card, char* str); |
| static int x25_configure (sdla_t* card, TX25Config* conf); |
| static int hdlc_configure (sdla_t* card, TX25Config* conf); |
| static int set_hdlc_level (sdla_t* card); |
| static int x25_get_err_stats (sdla_t* card); |
| static int x25_get_stats (sdla_t* card); |
| static int x25_set_intr_mode (sdla_t* card, int mode); |
| static int x25_close_hdlc (sdla_t* card); |
| static int x25_open_hdlc (sdla_t* card); |
| static int x25_setup_hdlc (sdla_t* card); |
| static int x25_set_dtr (sdla_t* card, int dtr); |
| static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan); |
| static int x25_place_call (sdla_t* card, x25_channel_t* chan); |
| static int x25_accept_call (sdla_t* card, int lcn, int qdm); |
| static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn); |
| static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf); |
| static int x25_fetch_events (sdla_t* card); |
| static int x25_error (sdla_t* card, int err, int cmd, int lcn); |
| |
| /*================================================= |
| * X.25 asynchronous event handlers |
| */ |
| static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); |
| static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); |
| static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); |
| static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); |
| static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb); |
| |
| |
| /*================================================= |
| * Miscellaneous functions |
| */ |
| static int connect (sdla_t* card); |
| static int disconnect (sdla_t* card); |
| static struct net_device* get_dev_by_lcn(struct wan_device* wandev, |
| unsigned lcn); |
| static int chan_connect(struct net_device* dev); |
| static int chan_disc(struct net_device* dev); |
| static void set_chan_state(struct net_device* dev, int state); |
| static int chan_send(struct net_device *dev, void* buff, unsigned data_len, |
| unsigned char tx_intr); |
| static unsigned char bps_to_speed_code (unsigned long bps); |
| static unsigned int dec_to_uint (unsigned char* str, int len); |
| static unsigned int hex_to_uint (unsigned char*, int); |
| static void parse_call_info (unsigned char*, x25_call_info_t*); |
| static struct net_device *find_channel(sdla_t *card, unsigned lcn); |
| static void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn); |
| static void setup_for_delayed_transmit(struct net_device *dev, |
| void *buf, unsigned len); |
| |
| |
| /*================================================= |
| * X25 API Functions |
| */ |
| static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev, |
| struct sk_buff **); |
| static void timer_intr_exec(sdla_t *, unsigned char); |
| static int execute_delayed_cmd(sdla_t *card, struct net_device *dev, |
| mbox_cmd_t *usr_cmd, char bad_cmd); |
| static int api_incoming_call (sdla_t*, TX25Mbox *, int); |
| static int alloc_and_init_skb_buf (sdla_t *,struct sk_buff **, int); |
| static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev, |
| TX25Mbox* mbox); |
| static int clear_confirm_event (sdla_t *, TX25Mbox*); |
| static void send_oob_msg (sdla_t *card, struct net_device *dev, TX25Mbox *mbox); |
| static int timer_intr_cmd_exec(sdla_t *card); |
| static void api_oob_event (sdla_t *card,TX25Mbox *mbox); |
| static int check_bad_command(sdla_t *card, struct net_device *dev); |
| static int channel_disconnect(sdla_t* card, struct net_device *dev); |
| static void hdlc_link_down (sdla_t*); |
| |
| /*================================================= |
| * XPIPEMON Functions |
| */ |
| static int process_udp_mgmt_pkt(sdla_t *); |
| static int udp_pkt_type( struct sk_buff *, sdla_t*); |
| static int reply_udp( unsigned char *, unsigned int); |
| static void init_x25_channel_struct( x25_channel_t *); |
| static void init_global_statistics( sdla_t *); |
| static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t *card, |
| struct net_device *dev, |
| struct sk_buff *skb, int lcn); |
| static unsigned short calc_checksum (char *, int); |
| |
| |
| |
| /*================================================= |
| * IPX functions |
| */ |
| static void switch_net_numbers(unsigned char *, unsigned long, unsigned char); |
| static int handle_IPXWAN(unsigned char *, char *, unsigned char , |
| unsigned long , unsigned short ); |
| |
| extern void disable_irq(unsigned int); |
| extern void enable_irq(unsigned int); |
| |
| static void S508_S514_lock(sdla_t *, unsigned long *); |
| static void S508_S514_unlock(sdla_t *, unsigned long *); |
| |
| |
| /*================================================= |
| * Global Variables |
| *=================================================*/ |
| |
| |
| |
| /*================================================= |
| * Public Functions |
| *=================================================*/ |
| |
| |
| |
| |
| /*=================================================================== |
| * wpx_init: X.25 Protocol Initialization routine. |
| * |
| * Purpose: To initialize the protocol/firmware. |
| * |
| * Rationale: This function is called by setup() function, in |
| * sdlamain.c, to dynamically setup the x25 protocol. |
| * This is the first protocol specific function, which |
| * executes once on startup. |
| * |
| * Description: This procedure initializes the x25 firmware and |
| * sets up the mailbox, transmit and receive buffer |
| * pointers. It also initializes all debugging structures |
| * and sets up the X25 environment. |
| * |
| * Sets up hardware options defined by user in [wanpipe#] |
| * section of wanpipe#.conf configuration file. |
| * |
| * At this point adapter is completely initialized |
| * and X.25 firmware is running. |
| * o read firmware version (to make sure it's alive) |
| * o configure adapter |
| * o initialize protocol-specific fields of the |
| * adapter data space. |
| * |
| * Called by: setup() function in sdlamain.c |
| * |
| * Assumptions: None |
| * |
| * Warnings: None |
| * |
| * Return: 0 o.k. |
| * < 0 failure. |
| */ |
| |
| int wpx_init (sdla_t* card, wandev_conf_t* conf) |
| { |
| union{ |
| char str[80]; |
| TX25Config cfg; |
| } u; |
| |
| /* Verify configuration ID */ |
| if (conf->config_id != WANCONFIG_X25){ |
| printk(KERN_INFO "%s: invalid configuration ID %u!\n", |
| card->devname, conf->config_id) |
| ; |
| return -EINVAL; |
| } |
| |
| /* Initialize protocol-specific fields */ |
| card->mbox = (void*)(card->hw.dpmbase + X25_MBOX_OFFS); |
| card->rxmb = (void*)(card->hw.dpmbase + X25_RXMBOX_OFFS); |
| card->flags = (void*)(card->hw.dpmbase + X25_STATUS_OFFS); |
| |
| /* Initialize for S514 Card */ |
| if(card->hw.type == SDLA_S514) { |
| card->mbox += X25_MB_VECTOR; |
| card->flags += X25_MB_VECTOR; |
| card->rxmb += X25_MB_VECTOR; |
| } |
| |
| |
| /* Read firmware version. Note that when adapter initializes, it |
| * clears the mailbox, so it may appear that the first command was |
| * executed successfully when in fact it was merely erased. To work |
| * around this, we execute the first command twice. |
| */ |
| if (x25_get_version(card, NULL) || x25_get_version(card, u.str)) |
| return -EIO; |
| |
| |
| /* X25 firmware can run ether in X25 or LAPB HDLC mode. |
| * Check the user defined option and configure accordingly */ |
| if (conf->u.x25.LAPB_hdlc_only == WANOPT_YES){ |
| if (set_hdlc_level(card) != CMD_OK){ |
| return -EIO; |
| }else{ |
| printk(KERN_INFO "%s: running LAP_B HDLC firmware v%s\n", |
| card->devname, u.str); |
| } |
| card->u.x.LAPB_hdlc = 1; |
| }else{ |
| printk(KERN_INFO "%s: running X.25 firmware v%s\n", |
| card->devname, u.str); |
| card->u.x.LAPB_hdlc = 0; |
| } |
| |
| /* Configure adapter. Here we set resonable defaults, then parse |
| * device configuration structure and set configuration options. |
| * Most configuration options are verified and corrected (if |
| * necessary) since we can't rely on the adapter to do so. |
| */ |
| memset(&u.cfg, 0, sizeof(u.cfg)); |
| u.cfg.t1 = 3; |
| u.cfg.n2 = 10; |
| u.cfg.autoHdlc = 1; /* automatic HDLC connection */ |
| u.cfg.hdlcWindow = 7; |
| u.cfg.pktWindow = 2; |
| u.cfg.station = 1; /* DTE */ |
| u.cfg.options = 0x0090; /* disable D-bit pragmatics */ |
| u.cfg.ccittCompat = 1988; |
| u.cfg.t10t20 = 30; |
| u.cfg.t11t21 = 30; |
| u.cfg.t12t22 = 30; |
| u.cfg.t13t23 = 30; |
| u.cfg.t16t26 = 30; |
| u.cfg.t28 = 30; |
| u.cfg.r10r20 = 5; |
| u.cfg.r12r22 = 5; |
| u.cfg.r13r23 = 5; |
| u.cfg.responseOpt = 1; /* RR's after every packet */ |
| |
| if (card->u.x.LAPB_hdlc){ |
| u.cfg.hdlcMTU = 1027; |
| } |
| |
| if (conf->u.x25.x25_conf_opt){ |
| u.cfg.options = conf->u.x25.x25_conf_opt; |
| } |
| |
| if (conf->clocking != WANOPT_EXTERNAL) |
| u.cfg.baudRate = bps_to_speed_code(conf->bps); |
| |
| if (conf->station != WANOPT_DTE){ |
| u.cfg.station = 0; /* DCE mode */ |
| } |
| |
| if (conf->interface != WANOPT_RS232 ){ |
| u.cfg.hdlcOptions |= 0x80; /* V35 mode */ |
| } |
| |
| /* adjust MTU */ |
| if (!conf->mtu || (conf->mtu >= 1024)) |
| card->wandev.mtu = 1024; |
| else if (conf->mtu >= 512) |
| card->wandev.mtu = 512; |
| else if (conf->mtu >= 256) |
| card->wandev.mtu = 256; |
| else if (conf->mtu >= 128) |
| card->wandev.mtu = 128; |
| else |
| card->wandev.mtu = 64; |
| |
| u.cfg.defPktSize = u.cfg.pktMTU = card->wandev.mtu; |
| |
| if (conf->u.x25.hi_pvc){ |
| card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, MAX_LCN_NUM); |
| card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc); |
| } |
| |
| if (conf->u.x25.hi_svc){ |
| card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, MAX_LCN_NUM); |
| card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc); |
| } |
| |
| /* Figure out the total number of channels to configure */ |
| card->u.x.num_of_ch = 0; |
| if (card->u.x.hi_svc != 0){ |
| card->u.x.num_of_ch = (card->u.x.hi_svc - card->u.x.lo_svc) + 1; |
| } |
| if (card->u.x.hi_pvc != 0){ |
| card->u.x.num_of_ch += (card->u.x.hi_pvc - card->u.x.lo_pvc) + 1; |
| } |
| |
| if (card->u.x.num_of_ch == 0){ |
| printk(KERN_INFO "%s: ERROR, Minimum number of PVC/SVC channels is 1 !\n" |
| "%s: Please set the Lowest/Highest PVC/SVC values !\n", |
| card->devname,card->devname); |
| return -ECHRNG; |
| } |
| |
| u.cfg.loPVC = card->u.x.lo_pvc; |
| u.cfg.hiPVC = card->u.x.hi_pvc; |
| u.cfg.loTwoWaySVC = card->u.x.lo_svc; |
| u.cfg.hiTwoWaySVC = card->u.x.hi_svc; |
| |
| if (conf->u.x25.hdlc_window) |
| u.cfg.hdlcWindow = min_t(unsigned int, conf->u.x25.hdlc_window, 7); |
| if (conf->u.x25.pkt_window) |
| u.cfg.pktWindow = min_t(unsigned int, conf->u.x25.pkt_window, 7); |
| |
| if (conf->u.x25.t1) |
| u.cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30); |
| if (conf->u.x25.t2) |
| u.cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 29); |
| if (conf->u.x25.t4) |
| u.cfg.t4 = min_t(unsigned int, conf->u.x25.t4, 240); |
| if (conf->u.x25.n2) |
| u.cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30); |
| |
| if (conf->u.x25.t10_t20) |
| u.cfg.t10t20 = min_t(unsigned int, conf->u.x25.t10_t20,255); |
| if (conf->u.x25.t11_t21) |
| u.cfg.t11t21 = min_t(unsigned int, conf->u.x25.t11_t21,255); |
| if (conf->u.x25.t12_t22) |
| u.cfg.t12t22 = min_t(unsigned int, conf->u.x25.t12_t22,255); |
| if (conf->u.x25.t13_t23) |
| u.cfg.t13t23 = min_t(unsigned int, conf->u.x25.t13_t23,255); |
| if (conf->u.x25.t16_t26) |
| u.cfg.t16t26 = min_t(unsigned int, conf->u.x25.t16_t26, 255); |
| if (conf->u.x25.t28) |
| u.cfg.t28 = min_t(unsigned int, conf->u.x25.t28, 255); |
| |
| if (conf->u.x25.r10_r20) |
| u.cfg.r10r20 = min_t(unsigned int, conf->u.x25.r10_r20,250); |
| if (conf->u.x25.r12_r22) |
| u.cfg.r12r22 = min_t(unsigned int, conf->u.x25.r12_r22,250); |
| if (conf->u.x25.r13_r23) |
| u.cfg.r13r23 = min_t(unsigned int, conf->u.x25.r13_r23,250); |
| |
| |
| if (conf->u.x25.ccitt_compat) |
| u.cfg.ccittCompat = conf->u.x25.ccitt_compat; |
| |
| /* initialize adapter */ |
| if (card->u.x.LAPB_hdlc){ |
| if (hdlc_configure(card, &u.cfg) != CMD_OK) |
| return -EIO; |
| }else{ |
| if (x25_configure(card, &u.cfg) != CMD_OK) |
| return -EIO; |
| } |
| |
| if ((x25_close_hdlc(card) != CMD_OK) || /* close HDLC link */ |
| (x25_set_dtr(card, 0) != CMD_OK)) /* drop DTR */ |
| return -EIO; |
| |
| /* Initialize protocol-specific fields of adapter data space */ |
| card->wandev.bps = conf->bps; |
| card->wandev.interface = conf->interface; |
| card->wandev.clocking = conf->clocking; |
| card->wandev.station = conf->station; |
| card->isr = &wpx_isr; |
| card->poll = NULL; //&wpx_poll; |
| card->disable_comm = &disable_comm; |
| card->exec = &wpx_exec; |
| card->wandev.update = &update; |
| card->wandev.new_if = &new_if; |
| card->wandev.del_if = &del_if; |
| |
| /* WARNING: This function cannot exit with an error |
| * after the change of state */ |
| card->wandev.state = WAN_DISCONNECTED; |
| |
| card->wandev.enable_tx_int = 0; |
| card->irq_dis_if_send_count = 0; |
| card->irq_dis_poll_count = 0; |
| card->u.x.tx_dev = NULL; |
| card->u.x.no_dev = 0; |
| |
| |
| /* Configure for S514 PCI Card */ |
| if (card->hw.type == SDLA_S514) { |
| card->u.x.hdlc_buf_status = |
| (volatile unsigned char *) |
| (card->hw.dpmbase + X25_MB_VECTOR+ X25_MISC_HDLC_BITS); |
| }else{ |
| card->u.x.hdlc_buf_status = |
| (volatile unsigned char *)(card->hw.dpmbase + X25_MISC_HDLC_BITS); |
| } |
| |
| card->u.x.poll_device=NULL; |
| card->wandev.udp_port = conf->udp_port; |
| |
| /* Enable or disable call setup logging */ |
| if (conf->u.x25.logging == WANOPT_YES){ |
| printk(KERN_INFO "%s: Enabling Call Logging.\n", |
| card->devname); |
| card->u.x.logging = 1; |
| }else{ |
| card->u.x.logging = 0; |
| } |
| |
| /* Enable or disable modem status reporting */ |
| if (conf->u.x25.oob_on_modem == WANOPT_YES){ |
| printk(KERN_INFO "%s: Enabling OOB on Modem change.\n", |
| card->devname); |
| card->u.x.oob_on_modem = 1; |
| }else{ |
| card->u.x.oob_on_modem = 0; |
| } |
| |
| init_global_statistics(card); |
| |
| INIT_WORK(&card->u.x.x25_poll_work, (void *)wpx_poll, card); |
| |
| init_timer(&card->u.x.x25_timer); |
| card->u.x.x25_timer.data = (unsigned long)card; |
| card->u.x.x25_timer.function = x25_timer_routine; |
| |
| return 0; |
| } |
| |
| /*========================================================= |
| * WAN Device Driver Entry Points |
| *========================================================*/ |
| |
| /*============================================================ |
| * Name: update(), Update device status & statistics. |
| * |
| * Purpose: To provide debugging and statitical |
| * information to the /proc file system. |
| * /proc/net/wanrouter/wanpipe# |
| * |
| * Rationale: The /proc file system is used to collect |
| * information about the kernel and drivers. |
| * Using the /proc file system the user |
| * can see exactly what the sangoma drivers are |
| * doing. And in what state they are in. |
| * |
| * Description: Collect all driver statistical information |
| * and pass it to the top laywer. |
| * |
| * Since we have to execute a debugging command, |
| * to obtain firmware statitics, we trigger a |
| * UPDATE function within the timer interrtup. |
| * We wait until the timer update is complete. |
| * Once complete return the appropriate return |
| * code to indicate that the update was successful. |
| * |
| * Called by: device_stat() in wanmain.c |
| * |
| * Assumptions: |
| * |
| * Warnings: This function will degrade the performance |
| * of the router, since it uses the mailbox. |
| * |
| * Return: 0 OK |
| * <0 Failed (or busy). |
| */ |
| |
| static int update(struct wan_device* wandev) |
| { |
| volatile sdla_t* card; |
| TX25Status* status; |
| unsigned long timeout; |
| |
| /* sanity checks */ |
| if ((wandev == NULL) || (wandev->private == NULL)) |
| return -EFAULT; |
| |
| if (wandev->state == WAN_UNCONFIGURED) |
| return -ENODEV; |
| |
| if (test_bit(SEND_CRIT, (void*)&wandev->critical)) |
| return -EAGAIN; |
| |
| if (!wandev->dev) |
| return -ENODEV; |
| |
| card = wandev->private; |
| status = card->flags; |
| |
| card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UPDATE; |
| status->imask |= INTR_ON_TIMER; |
| timeout = jiffies; |
| |
| for (;;){ |
| if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE)){ |
| break; |
| } |
| if ((jiffies-timeout) > 1*HZ){ |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; |
| return -EAGAIN; |
| } |
| } |
| return 0; |
| } |
| |
| |
| /*=================================================================== |
| * Name: new_if |
| * |
| * Purpose: To allocate and initialize resources for a |
| * new logical channel. |
| * |
| * Rationale: A new channel can be added dynamically via |
| * ioctl call. |
| * |
| * Description: Allocate a private channel structure, x25_channel_t. |
| * Parse the user interface options from wanpipe#.conf |
| * configuration file. |
| * Bind the private are into the network device private |
| * area pointer (dev->priv). |
| * Prepare the network device structure for registration. |
| * |
| * Called by: ROUTER_IFNEW Ioctl call, from wanrouter_ioctl() |
| * (wanmain.c) |
| * |
| * Assumptions: None |
| * |
| * Warnings: None |
| * |
| * Return: 0 Ok |
| * <0 Failed (channel will not be created) |
| */ |
| static int new_if(struct wan_device* wandev, struct net_device* dev, |
| wanif_conf_t* conf) |
| { |
| sdla_t* card = wandev->private; |
| x25_channel_t* chan; |
| int err = 0; |
| |
| if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)){ |
| printk(KERN_INFO "%s: invalid interface name!\n", |
| card->devname); |
| return -EINVAL; |
| } |
| |
| if(card->wandev.new_if_cnt++ > 0 && card->u.x.LAPB_hdlc) { |
| printk(KERN_INFO "%s: Error: Running LAPB HDLC Mode !\n", |
| card->devname); |
| printk(KERN_INFO |
| "%s: Maximum number of network interfaces must be one !\n", |
| card->devname); |
| return -EEXIST; |
| } |
| |
| /* allocate and initialize private data */ |
| chan = kmalloc(sizeof(x25_channel_t), GFP_ATOMIC); |
| if (chan == NULL){ |
| return -ENOMEM; |
| } |
| |
| memset(chan, 0, sizeof(x25_channel_t)); |
| |
| /* Bug Fix: Seg Err on PVC startup |
| * It must be here since bind_lcn_to_dev expects |
| * it bellow */ |
| dev->priv = chan; |
| |
| strcpy(chan->name, conf->name); |
| chan->card = card; |
| chan->dev = dev; |
| chan->common.sk = NULL; |
| chan->common.func = NULL; |
| chan->common.rw_bind = 0; |
| chan->tx_skb = chan->rx_skb = NULL; |
| |
| /* verify media address */ |
| if (conf->addr[0] == '@'){ /* SVC */ |
| chan->common.svc = 1; |
| strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ); |
| |
| /* Set channel timeouts (default if not specified) */ |
| chan->idle_timeout = (conf->idle_timeout) ? |
| conf->idle_timeout : 90; |
| chan->hold_timeout = (conf->hold_timeout) ? |
| conf->hold_timeout : 10; |
| |
| }else if (is_digit(conf->addr[0])){ /* PVC */ |
| int lcn = dec_to_uint(conf->addr, 0); |
| |
| if ((lcn >= card->u.x.lo_pvc) && (lcn <= card->u.x.hi_pvc)){ |
| bind_lcn_to_dev (card, dev, lcn); |
| }else{ |
| printk(KERN_ERR |
| "%s: PVC %u is out of range on interface %s!\n", |
| wandev->name, lcn, chan->name); |
| err = -EINVAL; |
| } |
| }else{ |
| printk(KERN_ERR |
| "%s: invalid media address on interface %s!\n", |
| wandev->name, chan->name); |
| err = -EINVAL; |
| } |
| |
| if(strcmp(conf->usedby, "WANPIPE") == 0){ |
| printk(KERN_INFO "%s: Running in WANPIPE mode %s\n", |
| wandev->name, chan->name); |
| chan->common.usedby = WANPIPE; |
| chan->protocol = htons(ETH_P_IP); |
| |
| }else if(strcmp(conf->usedby, "API") == 0){ |
| chan->common.usedby = API; |
| printk(KERN_INFO "%s: Running in API mode %s\n", |
| wandev->name, chan->name); |
| chan->protocol = htons(X25_PROT); |
| } |
| |
| |
| if (err){ |
| kfree(chan); |
| dev->priv = NULL; |
| return err; |
| } |
| |
| chan->enable_IPX = conf->enable_IPX; |
| |
| if (chan->enable_IPX) |
| chan->protocol = htons(ETH_P_IPX); |
| |
| if (conf->network_number) |
| chan->network_number = conf->network_number; |
| else |
| chan->network_number = 0xDEADBEEF; |
| |
| /* prepare network device data space for registration */ |
| strcpy(dev->name,chan->name); |
| |
| dev->init = &if_init; |
| |
| init_x25_channel_struct(chan); |
| |
| return 0; |
| } |
| |
| /*=================================================================== |
| * Name: del_if(), Remove a logical channel. |
| * |
| * Purpose: To dynamically remove a logical channel. |
| * |
| * Rationale: Each logical channel should be dynamically |
| * removable. This functin is called by an |
| * IOCTL_IFDEL ioctl call or shutdown(). |
| * |
| * Description: Do nothing. |
| * |
| * Called by: IOCTL_IFDEL : wanrouter_ioctl() from wanmain.c |
| * shutdown() from sdlamain.c |
| * |
| * Assumptions: |
| * |
| * Warnings: |
| * |
| * Return: 0 Ok. Void function. |
| */ |
| |
| //FIXME Del IF Should be taken out now. |
| |
| static int del_if(struct wan_device* wandev, struct net_device* dev) |
| { |
| return 0; |
| } |
| |
| |
| /*============================================================ |
| * Name: wpx_exec |
| * |
| * Description: Execute adapter interface command. |
| * This option is currently dissabled. |
| *===========================================================*/ |
| |
| static int wpx_exec (struct sdla* card, void* u_cmd, void* u_data) |
| { |
| return 0; |
| } |
| |
| /*============================================================ |
| * Name: disable_comm |
| * |
| * Description: Disable communications during shutdown. |
| * Dont check return code because there is |
| * nothing we can do about it. |
| * |
| * Warning: Dev and private areas are gone at this point. |
| *===========================================================*/ |
| |
| static void disable_comm(sdla_t* card) |
| { |
| disable_comm_shutdown(card); |
| del_timer(&card->u.x.x25_timer); |
| return; |
| } |
| |
| |
| /*============================================================ |
| * Network Device Interface |
| *===========================================================*/ |
| |
| /*=================================================================== |
| * Name: if_init(), Netowrk Interface Initialization |
| * |
| * Purpose: To initialize a network interface device structure. |
| * |
| * Rationale: During network interface startup, the if_init |
| * is called by the kernel to initialize the |
| * netowrk device structure. Thus a driver |
| * can customze a network device. |
| * |
| * Description: Initialize the netowrk device call back |
| * routines. This is where we tell the kernel |
| * which function to use when it wants to send |
| * via our interface. |
| * Furthermore, we initialize the device flags, |
| * MTU and physical address of the board. |
| * |
| * Called by: Kernel (/usr/src/linux/net/core/dev.c) |
| * (dev->init()) |
| * |
| * Assumptions: None |
| * |
| * Warnings: None |
| * |
| * Return: 0 Ok : Void function. |
| */ |
| static int if_init(struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| struct wan_device* wandev = &card->wandev; |
| |
| /* Initialize device driver entry points */ |
| dev->open = &if_open; |
| dev->stop = &if_close; |
| dev->hard_header = &if_header; |
| dev->rebuild_header = &if_rebuild_hdr; |
| dev->hard_start_xmit = &if_send; |
| dev->get_stats = &if_stats; |
| dev->tx_timeout = &if_tx_timeout; |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| /* Initialize media-specific parameters */ |
| dev->type = ARPHRD_PPP; /* ARP h/w type */ |
| dev->flags |= IFF_POINTOPOINT; |
| dev->flags |= IFF_NOARP; |
| |
| if (chan->common.usedby == API){ |
| dev->mtu = X25_CHAN_MTU+sizeof(x25api_hdr_t); |
| }else{ |
| dev->mtu = card->wandev.mtu; |
| } |
| |
| dev->hard_header_len = X25_HRDHDR_SZ; /* media header length */ |
| dev->addr_len = 2; /* hardware address length */ |
| |
| if (!chan->common.svc){ |
| *(unsigned short*)dev->dev_addr = htons(chan->common.lcn); |
| } |
| |
| /* Initialize hardware parameters (just for reference) */ |
| dev->irq = wandev->irq; |
| dev->dma = wandev->dma; |
| dev->base_addr = wandev->ioport; |
| dev->mem_start = (unsigned long)wandev->maddr; |
| dev->mem_end = wandev->maddr + wandev->msize - 1; |
| |
| /* Set transmit buffer queue length */ |
| dev->tx_queue_len = 100; |
| SET_MODULE_OWNER(dev); |
| |
| /* FIXME Why are we doing this */ |
| set_chan_state(dev, WAN_DISCONNECTED); |
| return 0; |
| } |
| |
| |
| /*=================================================================== |
| * Name: if_open(), Open/Bring up the Netowrk Interface |
| * |
| * Purpose: To bring up a network interface. |
| * |
| * Rationale: |
| * |
| * Description: Open network interface. |
| * o prevent module from unloading by incrementing use count |
| * o if link is disconnected then initiate connection |
| * |
| * Called by: Kernel (/usr/src/linux/net/core/dev.c) |
| * (dev->open()) |
| * |
| * Assumptions: None |
| * |
| * Warnings: None |
| * |
| * Return: 0 Ok |
| * <0 Failure: Interface will not come up. |
| */ |
| |
| static int if_open(struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| struct timeval tv; |
| unsigned long smp_flags; |
| |
| if (netif_running(dev)) |
| return -EBUSY; |
| |
| chan->tq_working = 0; |
| |
| /* Initialize the workqueue */ |
| INIT_WORK(&chan->common.wanpipe_work, (void *)x25api_bh, dev); |
| |
| /* Allocate and initialize BH circular buffer */ |
| /* Add 1 to MAX_BH_BUFF so we don't have test with (MAX_BH_BUFF-1) */ |
| chan->bh_head = kmalloc((sizeof(bh_data_t)*(MAX_BH_BUFF+1)),GFP_ATOMIC); |
| |
| if (chan->bh_head == NULL){ |
| printk(KERN_INFO "%s: ERROR, failed to allocate memory ! BH_BUFFERS !\n", |
| card->devname); |
| |
| return -ENOBUFS; |
| } |
| memset(chan->bh_head,0,(sizeof(bh_data_t)*(MAX_BH_BUFF+1))); |
| atomic_set(&chan->bh_buff_used, 0); |
| |
| /* Increment the number of interfaces */ |
| ++card->u.x.no_dev; |
| |
| wanpipe_open(card); |
| |
| /* LAPB protocol only uses one interface, thus |
| * start the protocol after it comes up. */ |
| if (card->u.x.LAPB_hdlc){ |
| if (card->open_cnt == 1){ |
| TX25Status* status = card->flags; |
| S508_S514_lock(card, &smp_flags); |
| x25_set_intr_mode(card, INTR_ON_TIMER); |
| status->imask &= ~INTR_ON_TIMER; |
| S508_S514_unlock(card, &smp_flags); |
| } |
| }else{ |
| /* X25 can have multiple interfaces thus, start the |
| * protocol once all interfaces are up */ |
| |
| //FIXME: There is a bug here. If interface is |
| //brought down and up, it will try to enable comm. |
| if (card->open_cnt == card->u.x.num_of_ch){ |
| |
| S508_S514_lock(card, &smp_flags); |
| connect(card); |
| S508_S514_unlock(card, &smp_flags); |
| |
| mod_timer(&card->u.x.x25_timer, jiffies + HZ); |
| } |
| } |
| /* Device is not up until the we are in connected state */ |
| do_gettimeofday( &tv ); |
| chan->router_start_time = tv.tv_sec; |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| /*=================================================================== |
| * Name: if_close(), Close/Bring down the Netowrk Interface |
| * |
| * Purpose: To bring down a network interface. |
| * |
| * Rationale: |
| * |
| * Description: Close network interface. |
| * o decrement use module use count |
| * |
| * Called by: Kernel (/usr/src/linux/net/core/dev.c) |
| * (dev->close()) |
| * ifconfig <name> down: will trigger the kernel |
| * which will call this function. |
| * |
| * Assumptions: None |
| * |
| * Warnings: None |
| * |
| * Return: 0 Ok |
| * <0 Failure: Interface will not exit properly. |
| */ |
| static int if_close(struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| unsigned long smp_flags; |
| |
| netif_stop_queue(dev); |
| |
| if ((chan->common.state == WAN_CONNECTED) || |
| (chan->common.state == WAN_CONNECTING)){ |
| S508_S514_lock(card, &smp_flags); |
| chan_disc(dev); |
| S508_S514_unlock(card, &smp_flags); |
| } |
| |
| wanpipe_close(card); |
| |
| S508_S514_lock(card, &smp_flags); |
| if (chan->bh_head){ |
| int i; |
| struct sk_buff *skb; |
| |
| for (i=0; i<(MAX_BH_BUFF+1); i++){ |
| skb = ((bh_data_t *)&chan->bh_head[i])->skb; |
| if (skb != NULL){ |
| dev_kfree_skb_any(skb); |
| } |
| } |
| kfree(chan->bh_head); |
| chan->bh_head=NULL; |
| } |
| S508_S514_unlock(card, &smp_flags); |
| |
| /* If this is the last close, disconnect physical link */ |
| if (!card->open_cnt){ |
| S508_S514_lock(card, &smp_flags); |
| disconnect(card); |
| x25_set_intr_mode(card, 0); |
| S508_S514_unlock(card, &smp_flags); |
| } |
| |
| /* Decrement the number of interfaces */ |
| --card->u.x.no_dev; |
| return 0; |
| } |
| |
| /*====================================================================== |
| * Build media header. |
| * o encapsulate packet according to encapsulation type. |
| * |
| * The trick here is to put packet type (Ethertype) into 'protocol' |
| * field of the socket buffer, so that we don't forget it. |
| * If encapsulation fails, set skb->protocol to 0 and discard |
| * packet later. |
| * |
| * Return: media header length. |
| *======================================================================*/ |
| |
| static int if_header(struct sk_buff* skb, struct net_device* dev, |
| unsigned short type, void* daddr, void* saddr, |
| unsigned len) |
| { |
| x25_channel_t* chan = dev->priv; |
| int hdr_len = dev->hard_header_len; |
| |
| skb->protocol = htons(type); |
| if (!chan->protocol){ |
| hdr_len = wanrouter_encapsulate(skb, dev, type); |
| if (hdr_len < 0){ |
| hdr_len = 0; |
| skb->protocol = htons(0); |
| } |
| } |
| return hdr_len; |
| } |
| |
| /*=============================================================== |
| * Re-build media header. |
| * |
| * Return: 1 physical address resolved. |
| * 0 physical address not resolved |
| *==============================================================*/ |
| |
| static int if_rebuild_hdr (struct sk_buff* skb) |
| { |
| struct net_device *dev = skb->dev; |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| |
| printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n", |
| card->devname, dev->name); |
| return 1; |
| } |
| |
| |
| /*============================================================================ |
| * Handle transmit timeout event from netif watchdog |
| */ |
| static void if_tx_timeout(struct net_device *dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t *card = chan->card; |
| |
| /* If our device stays busy for at least 5 seconds then we will |
| * kick start the device by making dev->tbusy = 0. We expect |
| * that our device never stays busy more than 5 seconds. So this |
| * is only used as a last resort. |
| */ |
| |
| ++chan->if_send_stat.if_send_tbusy_timeout; |
| printk (KERN_INFO "%s: Transmit timed out on %s\n", |
| card->devname, dev->name); |
| netif_wake_queue (dev); |
| } |
| |
| |
| /*========================================================================= |
| * Send a packet on a network interface. |
| * o set tbusy flag (marks start of the transmission). |
| * o check link state. If link is not up, then drop the packet. |
| * o check channel status. If it's down then initiate a call. |
| * o pass a packet to corresponding WAN device. |
| * o free socket buffer |
| * |
| * Return: 0 complete (socket buffer must be freed) |
| * non-0 packet may be re-transmitted (tbusy must be set) |
| * |
| * Notes: |
| * 1. This routine is called either by the protocol stack or by the "net |
| * bottom half" (with interrupts enabled). |
| * 2. Setting tbusy flag will inhibit further transmit requests from the |
| * protocol stack and can be used for flow control with protocol layer. |
| * |
| *========================================================================*/ |
| |
| static int if_send(struct sk_buff* skb, struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| TX25Status* status = card->flags; |
| int udp_type; |
| unsigned long smp_flags=0; |
| |
| ++chan->if_send_stat.if_send_entry; |
| |
| netif_stop_queue(dev); |
| |
| /* No need to check frame length, since socket code |
| * will perform the check for us */ |
| |
| chan->tick_counter = jiffies; |
| |
| /* Critical region starts here */ |
| S508_S514_lock(card, &smp_flags); |
| |
| if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)){ |
| printk(KERN_INFO "Hit critical in if_send()! %lx\n",card->wandev.critical); |
| goto if_send_crit_exit; |
| } |
| |
| udp_type = udp_pkt_type(skb, card); |
| |
| if(udp_type != UDP_INVALID_TYPE) { |
| |
| if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, dev, skb, |
| chan->common.lcn)) { |
| |
| status->imask |= INTR_ON_TIMER; |
| if (udp_type == UDP_XPIPE_TYPE){ |
| chan->if_send_stat.if_send_PIPE_request++; |
| } |
| } |
| netif_start_queue(dev); |
| clear_bit(SEND_CRIT,(void*)&card->wandev.critical); |
| S508_S514_unlock(card, &smp_flags); |
| return 0; |
| } |
| |
| if (chan->transmit_length){ |
| //FIXME: This check doesn't make sense any more |
| if (chan->common.state != WAN_CONNECTED){ |
| chan->transmit_length=0; |
| atomic_set(&chan->common.driver_busy,0); |
| }else{ |
| netif_stop_queue(dev); |
| ++card->u.x.tx_interrupts_pending; |
| status->imask |= INTR_ON_TX_FRAME; |
| clear_bit(SEND_CRIT,(void*)&card->wandev.critical); |
| S508_S514_unlock(card, &smp_flags); |
| return 1; |
| } |
| } |
| |
| if (card->wandev.state != WAN_CONNECTED){ |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| ++chan->if_send_stat.if_send_wan_disconnected; |
| |
| }else if ( chan->protocol && (chan->protocol != skb->protocol)){ |
| printk(KERN_INFO |
| "%s: unsupported Ethertype 0x%04X on interface %s!\n", |
| chan->name, htons(skb->protocol), dev->name); |
| |
| printk(KERN_INFO "PROTO %Xn", htons(chan->protocol)); |
| ++chan->ifstats.tx_errors; |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| ++chan->if_send_stat.if_send_protocol_error; |
| |
| }else switch (chan->common.state){ |
| |
| case WAN_DISCONNECTED: |
| /* Try to establish connection. If succeded, then start |
| * transmission, else drop a packet. |
| */ |
| if (chan->common.usedby == API){ |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| break; |
| }else{ |
| if (chan_connect(dev) != 0){ |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| break; |
| } |
| } |
| /* fall through */ |
| |
| case WAN_CONNECTED: |
| if( skb->protocol == htons(ETH_P_IPX)) { |
| if(chan->enable_IPX) { |
| switch_net_numbers( skb->data, |
| chan->network_number, 0); |
| } else { |
| ++card->wandev.stats.tx_dropped; |
| ++chan->ifstats.tx_dropped; |
| ++chan->if_send_stat.if_send_protocol_error; |
| goto if_send_crit_exit; |
| } |
| } |
| /* We never drop here, if cannot send than, copy |
| * a packet into a transmit buffer |
| */ |
| chan_send(dev, skb->data, skb->len, 0); |
| break; |
| |
| default: |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| break; |
| } |
| |
| |
| if_send_crit_exit: |
| |
| dev_kfree_skb_any(skb); |
| |
| netif_start_queue(dev); |
| clear_bit(SEND_CRIT,(void*)&card->wandev.critical); |
| S508_S514_unlock(card, &smp_flags); |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Setup so that a frame can be transmitted on the occurrence of a transmit |
| * interrupt. |
| *===========================================================================*/ |
| |
| static void setup_for_delayed_transmit(struct net_device* dev, void* buf, |
| unsigned len) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| TX25Status* status = card->flags; |
| |
| ++chan->if_send_stat.if_send_adptr_bfrs_full; |
| |
| if(chan->transmit_length) { |
| printk(KERN_INFO "%s: Error, transmit length set in delayed transmit!\n", |
| card->devname); |
| return; |
| } |
| |
| if (chan->common.usedby == API){ |
| if (len > X25_CHAN_MTU+sizeof(x25api_hdr_t)) { |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| printk(KERN_INFO "%s: Length is too big for delayed transmit\n", |
| card->devname); |
| return; |
| } |
| }else{ |
| if (len > X25_MAX_DATA) { |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| printk(KERN_INFO "%s: Length is too big for delayed transmit\n", |
| card->devname); |
| return; |
| } |
| } |
| |
| chan->transmit_length = len; |
| atomic_set(&chan->common.driver_busy,1); |
| memcpy(chan->transmit_buffer, buf, len); |
| |
| ++chan->if_send_stat.if_send_tx_int_enabled; |
| |
| /* Enable Transmit Interrupt */ |
| ++card->u.x.tx_interrupts_pending; |
| status->imask |= INTR_ON_TX_FRAME; |
| } |
| |
| |
| /*=============================================================== |
| * net_device_stats |
| * |
| * Get ethernet-style interface statistics. |
| * Return a pointer to struct enet_statistics. |
| * |
| *==============================================================*/ |
| static struct net_device_stats *if_stats(struct net_device* dev) |
| { |
| x25_channel_t *chan = dev->priv; |
| |
| if(chan == NULL) |
| return NULL; |
| |
| return &chan->ifstats; |
| } |
| |
| |
| /* |
| * Interrupt Handlers |
| */ |
| |
| /* |
| * X.25 Interrupt Service Routine. |
| */ |
| |
| static void wpx_isr (sdla_t* card) |
| { |
| TX25Status* status = card->flags; |
| |
| card->in_isr = 1; |
| ++card->statistics.isr_entry; |
| |
| if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){ |
| card->in_isr=0; |
| status->iflags = 0; |
| return; |
| } |
| |
| if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)){ |
| |
| printk(KERN_INFO "%s: wpx_isr: wandev.critical set to 0x%02lx, int type = 0x%02x\n", |
| card->devname, card->wandev.critical, status->iflags); |
| card->in_isr = 0; |
| status->iflags = 0; |
| return; |
| } |
| |
| /* For all interrupts set the critical flag to CRITICAL_RX_INTR. |
| * If the if_send routine is called with this flag set it will set |
| * the enable transmit flag to 1. (for a delayed interrupt) |
| */ |
| switch (status->iflags){ |
| |
| case RX_INTR_PENDING: /* receive interrupt */ |
| rx_intr(card); |
| break; |
| |
| case TX_INTR_PENDING: /* transmit interrupt */ |
| tx_intr(card); |
| break; |
| |
| case MODEM_INTR_PENDING: /* modem status interrupt */ |
| status_intr(card); |
| break; |
| |
| case X25_ASY_TRANS_INTR_PENDING: /* network event interrupt */ |
| event_intr(card); |
| break; |
| |
| case TIMER_INTR_PENDING: |
| timer_intr(card); |
| break; |
| |
| default: /* unwanted interrupt */ |
| spur_intr(card); |
| } |
| |
| card->in_isr = 0; |
| status->iflags = 0; /* clear interrupt condition */ |
| } |
| |
| /* |
| * Receive interrupt handler. |
| * This routine handles fragmented IP packets using M-bit according to the |
| * RFC1356. |
| * o map ligical channel number to network interface. |
| * o allocate socket buffer or append received packet to the existing one. |
| * o if M-bit is reset (i.e. it's the last packet in a sequence) then |
| * decapsulate packet and pass socket buffer to the protocol stack. |
| * |
| * Notes: |
| * 1. When allocating a socket buffer, if M-bit is set then more data is |
| * coming and we have to allocate buffer for the maximum IP packet size |
| * expected on this channel. |
| * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no |
| * socket buffers available) the whole packet sequence must be discarded. |
| */ |
| |
| static void rx_intr (sdla_t* card) |
| { |
| TX25Mbox* rxmb = card->rxmb; |
| unsigned lcn = rxmb->cmd.lcn; |
| struct net_device* dev = find_channel(card,lcn); |
| x25_channel_t* chan; |
| struct sk_buff* skb=NULL; |
| |
| if (dev == NULL){ |
| /* Invalid channel, discard packet */ |
| printk(KERN_INFO "%s: receiving on orphaned LCN %d!\n", |
| card->devname, lcn); |
| return; |
| } |
| |
| chan = dev->priv; |
| chan->i_timeout_sofar = jiffies; |
| |
| |
| /* Copy the data from the board, into an |
| * skb buffer |
| */ |
| if (wanpipe_pull_data_in_skb(card,dev,&skb)){ |
| ++chan->ifstats.rx_dropped; |
| ++card->wandev.stats.rx_dropped; |
| ++chan->rx_intr_stat.rx_intr_no_socket; |
| ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; |
| return; |
| } |
| |
| dev->last_rx = jiffies; /* timestamp */ |
| |
| |
| /* ------------ API ----------------*/ |
| |
| if (chan->common.usedby == API){ |
| |
| if (bh_enqueue(dev, skb)){ |
| ++chan->ifstats.rx_dropped; |
| ++card->wandev.stats.rx_dropped; |
| ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| |
| ++chan->ifstats.rx_packets; |
| chan->ifstats.rx_bytes += skb->len; |
| |
| |
| chan->rx_skb = NULL; |
| if (!test_and_set_bit(0, &chan->tq_working)){ |
| wanpipe_queue_work(&chan->common.wanpipe_work); |
| } |
| return; |
| } |
| |
| |
| /* ------------- WANPIPE -------------------*/ |
| |
| /* set rx_skb to NULL so we won't access it later when kernel already owns it */ |
| chan->rx_skb=NULL; |
| |
| /* Decapsulate packet, if necessary */ |
| if (!skb->protocol && !wanrouter_type_trans(skb, dev)){ |
| /* can't decapsulate packet */ |
| dev_kfree_skb_any(skb); |
| ++chan->ifstats.rx_errors; |
| ++chan->ifstats.rx_dropped; |
| ++card->wandev.stats.rx_dropped; |
| ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; |
| |
| }else{ |
| if( handle_IPXWAN(skb->data, chan->name, |
| chan->enable_IPX, chan->network_number, |
| skb->protocol)){ |
| |
| if( chan->enable_IPX ){ |
| if(chan_send(dev, skb->data, skb->len,0)){ |
| chan->tx_skb = skb; |
| }else{ |
| dev_kfree_skb_any(skb); |
| ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; |
| } |
| }else{ |
| /* increment IPX packet dropped statistic */ |
| ++chan->ifstats.rx_dropped; |
| ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; |
| } |
| }else{ |
| skb->mac.raw = skb->data; |
| chan->ifstats.rx_bytes += skb->len; |
| ++chan->ifstats.rx_packets; |
| ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack; |
| netif_rx(skb); |
| } |
| } |
| |
| return; |
| } |
| |
| |
| static int wanpipe_pull_data_in_skb(sdla_t *card, struct net_device *dev, |
| struct sk_buff **skb) |
| { |
| void *bufptr; |
| TX25Mbox* rxmb = card->rxmb; |
| unsigned len = rxmb->cmd.length; /* packet length */ |
| unsigned qdm = rxmb->cmd.qdm; /* Q,D and M bits */ |
| x25_channel_t *chan = dev->priv; |
| struct sk_buff *new_skb = *skb; |
| |
| if (chan->common.usedby == WANPIPE){ |
| if (chan->drop_sequence){ |
| if (!(qdm & 0x01)){ |
| chan->drop_sequence = 0; |
| } |
| return 1; |
| } |
| new_skb = chan->rx_skb; |
| }else{ |
| /* Add on the API header to the received |
| * data |
| */ |
| len += sizeof(x25api_hdr_t); |
| } |
| |
| if (new_skb == NULL){ |
| int bufsize; |
| |
| if (chan->common.usedby == WANPIPE){ |
| bufsize = (qdm & 0x01) ? dev->mtu : len; |
| }else{ |
| bufsize = len; |
| } |
| |
| /* Allocate new socket buffer */ |
| new_skb = dev_alloc_skb(bufsize + dev->hard_header_len); |
| if (new_skb == NULL){ |
| printk(KERN_INFO "%s: no socket buffers available!\n", |
| card->devname); |
| chan->drop_sequence = 1; /* set flag */ |
| ++chan->ifstats.rx_dropped; |
| return 1; |
| } |
| } |
| |
| if (skb_tailroom(new_skb) < len){ |
| /* No room for the packet. Call off the whole thing! */ |
| dev_kfree_skb_any(new_skb); |
| if (chan->common.usedby == WANPIPE){ |
| chan->rx_skb = NULL; |
| if (qdm & 0x01){ |
| chan->drop_sequence = 1; |
| } |
| } |
| |
| printk(KERN_INFO "%s: unexpectedly long packet sequence " |
| "on interface %s!\n", card->devname, dev->name); |
| ++chan->ifstats.rx_length_errors; |
| return 1; |
| } |
| |
| bufptr = skb_put(new_skb,len); |
| |
| |
| if (chan->common.usedby == API){ |
| /* Fill in the x25api header |
| */ |
| x25api_t * api_data = (x25api_t*)bufptr; |
| api_data->hdr.qdm = rxmb->cmd.qdm; |
| api_data->hdr.cause = rxmb->cmd.cause; |
| api_data->hdr.diagn = rxmb->cmd.diagn; |
| api_data->hdr.length = rxmb->cmd.length; |
| memcpy(api_data->data, rxmb->data, rxmb->cmd.length); |
| }else{ |
| memcpy(bufptr, rxmb->data, len); |
| } |
| |
| new_skb->dev = dev; |
| |
| if (chan->common.usedby == API){ |
| new_skb->mac.raw = new_skb->data; |
| new_skb->protocol = htons(X25_PROT); |
| new_skb->pkt_type = WAN_PACKET_DATA; |
| }else{ |
| new_skb->protocol = chan->protocol; |
| chan->rx_skb = new_skb; |
| } |
| |
| /* If qdm bit is set, more data is coming |
| * thus, exit and wait for more data before |
| * sending the packet up. (Used by router only) |
| */ |
| if ((qdm & 0x01) && (chan->common.usedby == WANPIPE)) |
| return 1; |
| |
| *skb = new_skb; |
| |
| return 0; |
| } |
| |
| /*=============================================================== |
| * tx_intr |
| * |
| * Transmit interrupt handler. |
| * For each dev, check that there is something to send. |
| * If data available, transmit. |
| * |
| *===============================================================*/ |
| |
| static void tx_intr (sdla_t* card) |
| { |
| struct net_device *dev; |
| TX25Status* status = card->flags; |
| unsigned char more_to_tx=0; |
| x25_channel_t *chan=NULL; |
| int i=0; |
| |
| if (card->u.x.tx_dev == NULL){ |
| card->u.x.tx_dev = card->wandev.dev; |
| } |
| |
| dev = card->u.x.tx_dev; |
| |
| for (;;){ |
| |
| chan = dev->priv; |
| if (chan->transmit_length){ |
| /* Device was set to transmit, check if the TX |
| * buffers are available |
| */ |
| if (chan->common.state != WAN_CONNECTED){ |
| chan->transmit_length = 0; |
| atomic_set(&chan->common.driver_busy,0); |
| chan->tx_offset=0; |
| if (netif_queue_stopped(dev)){ |
| if (chan->common.usedby == API){ |
| netif_start_queue(dev); |
| wakeup_sk_bh(dev); |
| }else{ |
| netif_wake_queue(dev); |
| } |
| } |
| dev = move_dev_to_next(card,dev); |
| break; |
| } |
| |
| if ((status->cflags[chan->ch_idx] & 0x40 || card->u.x.LAPB_hdlc) && |
| (*card->u.x.hdlc_buf_status & 0x40) ){ |
| /* Tx buffer available, we can send */ |
| |
| if (tx_intr_send(card, dev)){ |
| more_to_tx=1; |
| } |
| |
| /* If more than one interface present, move the |
| * device pointer to the next interface, so on the |
| * next TX interrupt we will try sending from it. |
| */ |
| dev = move_dev_to_next(card,dev); |
| break; |
| }else{ |
| /* Tx buffers not available, but device set |
| * the TX interrupt. Set more_to_tx and try |
| * to transmit for other devices. |
| */ |
| more_to_tx=1; |
| dev = move_dev_to_next(card,dev); |
| } |
| |
| }else{ |
| /* This device was not set to transmit, |
| * go to next |
| */ |
| dev = move_dev_to_next(card,dev); |
| } |
| |
| if (++i == card->u.x.no_dev){ |
| if (!more_to_tx){ |
| DBG_PRINTK(KERN_INFO "%s: Nothing to Send in TX INTR\n", |
| card->devname); |
| } |
| break; |
| } |
| |
| } //End of FOR |
| |
| card->u.x.tx_dev = dev; |
| |
| if (!more_to_tx){ |
| /* if any other interfaces have transmit interrupts pending, */ |
| /* do not disable the global transmit interrupt */ |
| if (!(--card->u.x.tx_interrupts_pending)){ |
| status->imask &= ~INTR_ON_TX_FRAME; |
| } |
| } |
| return; |
| } |
| |
| /*=============================================================== |
| * move_dev_to_next |
| * |
| * |
| *===============================================================*/ |
| |
| |
| struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev) |
| { |
| if (card->u.x.no_dev != 1){ |
| if (!*((struct net_device **)dev->priv)) |
| return card->wandev.dev; |
| else |
| return *((struct net_device **)dev->priv); |
| } |
| return dev; |
| } |
| |
| /*=============================================================== |
| * tx_intr_send |
| * |
| * |
| *===============================================================*/ |
| |
| static int tx_intr_send(sdla_t *card, struct net_device *dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| |
| if (chan_send (dev,chan->transmit_buffer,chan->transmit_length,1)){ |
| |
| /* Packet was split up due to its size, do not disable |
| * tx_intr |
| */ |
| return 1; |
| } |
| |
| chan->transmit_length=0; |
| atomic_set(&chan->common.driver_busy,0); |
| chan->tx_offset=0; |
| |
| /* If we are in API mode, wakeup the |
| * sock BH handler, not the NET_BH */ |
| if (netif_queue_stopped(dev)){ |
| if (chan->common.usedby == API){ |
| netif_start_queue(dev); |
| wakeup_sk_bh(dev); |
| }else{ |
| netif_wake_queue(dev); |
| } |
| } |
| return 0; |
| } |
| |
| |
| /*=============================================================== |
| * timer_intr |
| * |
| * Timer interrupt handler. |
| * Check who called the timer interrupt and perform |
| * action accordingly. |
| * |
| *===============================================================*/ |
| |
| static void timer_intr (sdla_t *card) |
| { |
| TX25Status* status = card->flags; |
| |
| if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC){ |
| |
| if (timer_intr_cmd_exec(card) == 0){ |
| card->u.x.timer_int_enabled &= |
| ~TMR_INT_ENABLED_CMD_EXEC; |
| } |
| |
| }else if(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UDP_PKT) { |
| |
| if ((*card->u.x.hdlc_buf_status & 0x40) && |
| card->u.x.udp_type == UDP_XPIPE_TYPE){ |
| |
| if(process_udp_mgmt_pkt(card)) { |
| card->u.x.timer_int_enabled &= |
| ~TMR_INT_ENABLED_UDP_PKT; |
| } |
| } |
| |
| }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_ACTIVE) { |
| |
| struct net_device *dev = card->u.x.poll_device; |
| x25_channel_t *chan = NULL; |
| |
| if (!dev){ |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE; |
| return; |
| } |
| chan = dev->priv; |
| |
| printk(KERN_INFO |
| "%s: Closing down Idle link %s on LCN %d\n", |
| card->devname,chan->name,chan->common.lcn); |
| chan->i_timeout_sofar = jiffies; |
| chan_disc(dev); |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_ACTIVE; |
| card->u.x.poll_device=NULL; |
| |
| }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_ON) { |
| |
| wanpipe_set_state(card, WAN_CONNECTED); |
| if (card->u.x.LAPB_hdlc){ |
| struct net_device *dev = card->wandev.dev; |
| set_chan_state(dev,WAN_CONNECTED); |
| send_delayed_cmd_result(card,dev,card->mbox); |
| } |
| |
| /* 0x8F enable all interrupts */ |
| x25_set_intr_mode(card, INTR_ON_RX_FRAME| |
| INTR_ON_TX_FRAME| |
| INTR_ON_MODEM_STATUS_CHANGE| |
| //INTR_ON_COMMAND_COMPLETE| |
| X25_ASY_TRANS_INTR_PENDING | |
| INTR_ON_TIMER | |
| DIRECT_RX_INTR_USAGE |
| ); |
| |
| status->imask &= ~INTR_ON_TX_FRAME; /* mask Tx interrupts */ |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_ON; |
| |
| }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_CONNECT_OFF) { |
| |
| //printk(KERN_INFO "Poll connect, Turning OFF\n"); |
| disconnect(card); |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_CONNECT_OFF; |
| |
| }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_POLL_DISCONNECT) { |
| |
| //printk(KERN_INFO "POll disconnect, trying to connect\n"); |
| connect(card); |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_POLL_DISCONNECT; |
| |
| }else if (card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE){ |
| |
| if (*card->u.x.hdlc_buf_status & 0x40){ |
| x25_get_err_stats(card); |
| x25_get_stats(card); |
| card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; |
| } |
| } |
| |
| if(!card->u.x.timer_int_enabled){ |
| //printk(KERN_INFO "Turning Timer Off \n"); |
| status->imask &= ~INTR_ON_TIMER; |
| } |
| } |
| |
| /*==================================================================== |
| * Modem status interrupt handler. |
| *===================================================================*/ |
| static void status_intr (sdla_t* card) |
| { |
| |
| /* Added to avoid Modem status message flooding */ |
| static TX25ModemStatus last_stat; |
| |
| TX25Mbox* mbox = card->mbox; |
| TX25ModemStatus *modem_status; |
| struct net_device *dev; |
| x25_channel_t *chan; |
| int err; |
| |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_READ_MODEM_STATUS; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err){ |
| x25_error(card, err, X25_READ_MODEM_STATUS, 0); |
| }else{ |
| |
| modem_status = (TX25ModemStatus*)mbox->data; |
| |
| /* Check if the last status was the same |
| * if it was, do NOT print message again */ |
| |
| if (last_stat.status != modem_status->status){ |
| |
| printk(KERN_INFO "%s: Modem Status Change: DCD=%s, CTS=%s\n", |
| card->devname,DCD(modem_status->status),CTS(modem_status->status)); |
| |
| last_stat.status = modem_status->status; |
| |
| if (card->u.x.oob_on_modem){ |
| |
| mbox->cmd.pktType = mbox->cmd.command; |
| mbox->cmd.result = 0x08; |
| |
| /* Send a OOB to all connected sockets */ |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device**)dev->priv)) { |
| chan=dev->priv; |
| if (chan->common.usedby == API){ |
| send_oob_msg(card,dev,mbox); |
| } |
| } |
| |
| /* The modem OOB message will probably kill the |
| * the link. If we don't clear the flag here, |
| * a deadlock could occur */ |
| if (atomic_read(&card->u.x.command_busy)){ |
| atomic_set(&card->u.x.command_busy,0); |
| } |
| } |
| } |
| } |
| |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_HDLC_LINK_STATUS; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err){ |
| x25_error(card, err, X25_HDLC_LINK_STATUS, 0); |
| } |
| |
| } |
| |
| /*==================================================================== |
| * Network event interrupt handler. |
| *===================================================================*/ |
| static void event_intr (sdla_t* card) |
| { |
| x25_fetch_events(card); |
| } |
| |
| /*==================================================================== |
| * Spurious interrupt handler. |
| * o print a warning |
| * o |
| *====================================================================*/ |
| |
| static void spur_intr (sdla_t* card) |
| { |
| printk(KERN_INFO "%s: spurious interrupt!\n", card->devname); |
| } |
| |
| |
| /* |
| * Background Polling Routines |
| */ |
| |
| /*==================================================================== |
| * Main polling routine. |
| * This routine is repeatedly called by the WANPIPE 'thread' to allow for |
| * time-dependent housekeeping work. |
| * |
| * Notes: |
| * 1. This routine may be called on interrupt context with all interrupts |
| * enabled. Beware! |
| *====================================================================*/ |
| |
| static void wpx_poll (sdla_t *card) |
| { |
| if (!card->wandev.dev){ |
| goto wpx_poll_exit; |
| } |
| |
| if (card->open_cnt != card->u.x.num_of_ch){ |
| goto wpx_poll_exit; |
| } |
| |
| if (test_bit(PERI_CRIT,&card->wandev.critical)){ |
| goto wpx_poll_exit; |
| } |
| |
| if (test_bit(SEND_CRIT,&card->wandev.critical)){ |
| goto wpx_poll_exit; |
| } |
| |
| switch(card->wandev.state){ |
| case WAN_CONNECTED: |
| poll_active(card); |
| break; |
| |
| case WAN_CONNECTING: |
| poll_connecting(card); |
| break; |
| |
| case WAN_DISCONNECTED: |
| poll_disconnected(card); |
| break; |
| } |
| |
| wpx_poll_exit: |
| clear_bit(POLL_CRIT,&card->wandev.critical); |
| return; |
| } |
| |
| static void trigger_x25_poll(sdla_t *card) |
| { |
| schedule_work(&card->u.x.x25_poll_work); |
| } |
| |
| /*==================================================================== |
| * Handle physical link establishment phase. |
| * o if connection timed out, disconnect the link. |
| *===================================================================*/ |
| |
| static void poll_connecting (sdla_t* card) |
| { |
| volatile TX25Status* status = card->flags; |
| |
| if (status->gflags & X25_HDLC_ABM){ |
| |
| timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_ON); |
| |
| }else if ((jiffies - card->state_tick) > CONNECT_TIMEOUT){ |
| |
| timer_intr_exec (card, TMR_INT_ENABLED_POLL_CONNECT_OFF); |
| |
| } |
| } |
| |
| /*==================================================================== |
| * Handle physical link disconnected phase. |
| * o if hold-down timeout has expired and there are open interfaces, |
| * connect link. |
| *===================================================================*/ |
| |
| static void poll_disconnected (sdla_t* card) |
| { |
| struct net_device *dev; |
| x25_channel_t *chan; |
| TX25Status* status = card->flags; |
| |
| if (!card->u.x.LAPB_hdlc && card->open_cnt && |
| ((jiffies - card->state_tick) > HOLD_DOWN_TIME)){ |
| timer_intr_exec(card, TMR_INT_ENABLED_POLL_DISCONNECT); |
| } |
| |
| |
| if ((dev=card->wandev.dev) == NULL) |
| return; |
| |
| if ((chan=dev->priv) == NULL) |
| return; |
| |
| if (chan->common.usedby == API && |
| atomic_read(&chan->common.command) && |
| card->u.x.LAPB_hdlc){ |
| |
| if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) |
| card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; |
| |
| if (!(status->imask & INTR_ON_TIMER)) |
| status->imask |= INTR_ON_TIMER; |
| } |
| |
| } |
| |
| /*==================================================================== |
| * Handle active link phase. |
| * o fetch X.25 asynchronous events. |
| * o kick off transmission on all interfaces. |
| *===================================================================*/ |
| |
| static void poll_active (sdla_t* card) |
| { |
| struct net_device* dev; |
| TX25Status* status = card->flags; |
| |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)){ |
| x25_channel_t* chan = dev->priv; |
| |
| /* If SVC has been idle long enough, close virtual circuit */ |
| if ( chan->common.svc && |
| chan->common.state == WAN_CONNECTED && |
| chan->common.usedby == WANPIPE ){ |
| |
| if( (jiffies - chan->i_timeout_sofar) / HZ > chan->idle_timeout ){ |
| /* Close svc */ |
| card->u.x.poll_device=dev; |
| timer_intr_exec (card, TMR_INT_ENABLED_POLL_ACTIVE); |
| } |
| } |
| |
| #ifdef PRINT_DEBUG |
| chan->ifstats.tx_compressed = atomic_read(&chan->common.command); |
| chan->ifstats.tx_errors = chan->common.state; |
| chan->ifstats.rx_fifo_errors = atomic_read(&card->u.x.command_busy); |
| ++chan->ifstats.tx_bytes; |
| |
| chan->ifstats.rx_fifo_errors=atomic_read(&chan->common.disconnect); |
| chan->ifstats.multicast=atomic_read(&chan->bh_buff_used); |
| chan->ifstats.rx_length_errors=*card->u.x.hdlc_buf_status; |
| #endif |
| |
| if (chan->common.usedby == API && |
| atomic_read(&chan->common.command) && |
| !card->u.x.LAPB_hdlc){ |
| |
| if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) |
| card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; |
| |
| if (!(status->imask & INTR_ON_TIMER)) |
| status->imask |= INTR_ON_TIMER; |
| } |
| |
| if ((chan->common.usedby == API) && |
| atomic_read(&chan->common.disconnect)){ |
| |
| if (chan->common.state == WAN_DISCONNECTED){ |
| atomic_set(&chan->common.disconnect,0); |
| return; |
| } |
| |
| atomic_set(&chan->common.command,X25_CLEAR_CALL); |
| if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_CMD_EXEC)) |
| card->u.x.timer_int_enabled |= TMR_INT_ENABLED_CMD_EXEC; |
| |
| if (!(status->imask & INTR_ON_TIMER)) |
| status->imask |= INTR_ON_TIMER; |
| } |
| } |
| } |
| |
| static void timer_intr_exec(sdla_t *card, unsigned char TYPE) |
| { |
| TX25Status* status = card->flags; |
| card->u.x.timer_int_enabled |= TYPE; |
| if (!(status->imask & INTR_ON_TIMER)) |
| status->imask |= INTR_ON_TIMER; |
| } |
| |
| |
| /*==================================================================== |
| * SDLA Firmware-Specific Functions |
| * |
| * Almost all X.25 commands can unexpetedly fail due to so called 'X.25 |
| * asynchronous events' such as restart, interrupt, incoming call request, |
| * call clear request, etc. They can't be ignored and have to be delt with |
| * immediately. To tackle with this problem we execute each interface |
| * command in a loop until good return code is received or maximum number |
| * of retries is reached. Each interface command returns non-zero return |
| * code, an asynchronous event/error handler x25_error() is called. |
| *====================================================================*/ |
| |
| /*==================================================================== |
| * Read X.25 firmware version. |
| * Put code version as ASCII string in str. |
| *===================================================================*/ |
| |
| static int x25_get_version (sdla_t* card, char* str) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_READ_CODE_VERSION; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && |
| x25_error(card, err, X25_READ_CODE_VERSION, 0)); |
| |
| if (!err && str) |
| { |
| int len = mbox->cmd.length; |
| |
| memcpy(str, mbox->data, len); |
| str[len] = '\0'; |
| } |
| return err; |
| } |
| |
| /*==================================================================== |
| * Configure adapter. |
| *===================================================================*/ |
| |
| static int x25_configure (sdla_t* card, TX25Config* conf) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do{ |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| memcpy(mbox->data, (void*)conf, sizeof(TX25Config)); |
| mbox->cmd.length = sizeof(TX25Config); |
| mbox->cmd.command = X25_SET_CONFIGURATION; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0)); |
| return err; |
| } |
| |
| /*==================================================================== |
| * Configure adapter for HDLC only. |
| *===================================================================*/ |
| |
| static int hdlc_configure (sdla_t* card, TX25Config* conf) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do{ |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| memcpy(mbox->data, (void*)conf, sizeof(TX25Config)); |
| mbox->cmd.length = sizeof(TX25Config); |
| mbox->cmd.command = X25_HDLC_SET_CONFIG; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_SET_CONFIGURATION, 0)); |
| |
| return err; |
| } |
| |
| static int set_hdlc_level (sdla_t* card) |
| { |
| |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do{ |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = SET_PROTOCOL_LEVEL; |
| mbox->cmd.length = 1; |
| mbox->data[0] = HDLC_LEVEL; //| DO_HDLC_LEVEL_ERROR_CHECKING; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, SET_PROTOCOL_LEVEL, 0)); |
| |
| return err; |
| } |
| |
| |
| |
| /*==================================================================== |
| * Get communications error statistics. |
| *====================================================================*/ |
| |
| static int x25_get_err_stats (sdla_t* card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_HDLC_READ_COMM_ERR; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_HDLC_READ_COMM_ERR, 0)); |
| |
| if (!err) |
| { |
| THdlcCommErr* stats = (void*)mbox->data; |
| |
| card->wandev.stats.rx_over_errors = stats->rxOverrun; |
| card->wandev.stats.rx_crc_errors = stats->rxBadCrc; |
| card->wandev.stats.rx_missed_errors = stats->rxAborted; |
| card->wandev.stats.tx_aborted_errors = stats->txAborted; |
| } |
| return err; |
| } |
| |
| /*==================================================================== |
| * Get protocol statistics. |
| *===================================================================*/ |
| |
| static int x25_get_stats (sdla_t* card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_READ_STATISTICS; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_READ_STATISTICS, 0)) ; |
| |
| if (!err) |
| { |
| TX25Stats* stats = (void*)mbox->data; |
| |
| card->wandev.stats.rx_packets = stats->rxData; |
| card->wandev.stats.tx_packets = stats->txData; |
| } |
| return err; |
| } |
| |
| /*==================================================================== |
| * Close HDLC link. |
| *===================================================================*/ |
| |
| static int x25_close_hdlc (sdla_t* card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_HDLC_LINK_CLOSE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_CLOSE, 0)); |
| |
| return err; |
| } |
| |
| |
| /*==================================================================== |
| * Open HDLC link. |
| *===================================================================*/ |
| |
| static int x25_open_hdlc (sdla_t* card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_HDLC_LINK_OPEN; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_OPEN, 0)); |
| |
| return err; |
| } |
| |
| /*===================================================================== |
| * Setup HDLC link. |
| *====================================================================*/ |
| static int x25_setup_hdlc (sdla_t* card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_HDLC_LINK_SETUP; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_SETUP, 0)); |
| |
| return err; |
| } |
| |
| /*==================================================================== |
| * Set (raise/drop) DTR. |
| *===================================================================*/ |
| |
| static int x25_set_dtr (sdla_t* card, int dtr) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->data[0] = 0; |
| mbox->data[2] = 0; |
| mbox->data[1] = dtr ? 0x02 : 0x01; |
| mbox->cmd.length = 3; |
| mbox->cmd.command = X25_SET_GLOBAL_VARS; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_SET_GLOBAL_VARS, 0)); |
| |
| return err; |
| } |
| |
| /*==================================================================== |
| * Set interrupt mode. |
| *===================================================================*/ |
| |
| static int x25_set_intr_mode (sdla_t* card, int mode) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->data[0] = mode; |
| if (card->hw.fwid == SFID_X25_508){ |
| mbox->data[1] = card->hw.irq; |
| mbox->data[2] = 2; |
| mbox->cmd.length = 3; |
| }else { |
| mbox->cmd.length = 1; |
| } |
| mbox->cmd.command = X25_SET_INTERRUPT_MODE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_SET_INTERRUPT_MODE, 0)); |
| |
| return err; |
| } |
| |
| /*==================================================================== |
| * Read X.25 channel configuration. |
| *===================================================================*/ |
| |
| static int x25_get_chan_conf (sdla_t* card, x25_channel_t* chan) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int lcn = chan->common.lcn; |
| int err; |
| |
| do{ |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.lcn = lcn; |
| mbox->cmd.command = X25_READ_CHANNEL_CONFIG; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_READ_CHANNEL_CONFIG, lcn)); |
| |
| if (!err) |
| { |
| TX25Status* status = card->flags; |
| |
| /* calculate an offset into the array of status bytes */ |
| if (card->u.x.hi_svc <= X25_MAX_CHAN){ |
| |
| chan->ch_idx = lcn - 1; |
| |
| }else{ |
| int offset; |
| |
| /* FIX: Apr 14 2000 : Nenad Corbic |
| * The data field was being compared to 0x1F using |
| * '&&' instead of '&'. |
| * This caused X25API to fail for LCNs greater than 255. |
| */ |
| switch (mbox->data[0] & 0x1F) |
| { |
| case 0x01: |
| offset = status->pvc_map; break; |
| case 0x03: |
| offset = status->icc_map; break; |
| case 0x07: |
| offset = status->twc_map; break; |
| case 0x0B: |
| offset = status->ogc_map; break; |
| default: |
| offset = 0; |
| } |
| chan->ch_idx = lcn - 1 - offset; |
| } |
| |
| /* get actual transmit packet size on this channel */ |
| switch(mbox->data[1] & 0x38) |
| { |
| case 0x00: |
| chan->tx_pkt_size = 16; |
| break; |
| case 0x08: |
| chan->tx_pkt_size = 32; |
| break; |
| case 0x10: |
| chan->tx_pkt_size = 64; |
| break; |
| case 0x18: |
| chan->tx_pkt_size = 128; |
| break; |
| case 0x20: |
| chan->tx_pkt_size = 256; |
| break; |
| case 0x28: |
| chan->tx_pkt_size = 512; |
| break; |
| case 0x30: |
| chan->tx_pkt_size = 1024; |
| break; |
| } |
| if (card->u.x.logging) |
| printk(KERN_INFO "%s: X.25 packet size on LCN %d is %d.\n", |
| card->devname, lcn, chan->tx_pkt_size); |
| } |
| return err; |
| } |
| |
| /*==================================================================== |
| * Place X.25 call. |
| *====================================================================*/ |
| |
| static int x25_place_call (sdla_t* card, x25_channel_t* chan) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| char str[64]; |
| |
| |
| if (chan->protocol == htons(ETH_P_IP)){ |
| sprintf(str, "-d%s -uCC", chan->addr); |
| |
| }else if (chan->protocol == htons(ETH_P_IPX)){ |
| sprintf(str, "-d%s -u800000008137", chan->addr); |
| |
| } |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| strcpy(mbox->data, str); |
| mbox->cmd.length = strlen(str); |
| mbox->cmd.command = X25_PLACE_CALL; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_PLACE_CALL, 0)); |
| |
| if (!err){ |
| bind_lcn_to_dev (card, chan->dev, mbox->cmd.lcn); |
| } |
| return err; |
| } |
| |
| /*==================================================================== |
| * Accept X.25 call. |
| *====================================================================*/ |
| |
| static int x25_accept_call (sdla_t* card, int lcn, int qdm) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.lcn = lcn; |
| mbox->cmd.qdm = qdm; |
| mbox->cmd.command = X25_ACCEPT_CALL; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_ACCEPT_CALL, lcn)); |
| |
| return err; |
| } |
| |
| /*==================================================================== |
| * Clear X.25 call. |
| *====================================================================*/ |
| |
| static int x25_clear_call (sdla_t* card, int lcn, int cause, int diagn) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.lcn = lcn; |
| mbox->cmd.cause = cause; |
| mbox->cmd.diagn = diagn; |
| mbox->cmd.command = X25_CLEAR_CALL; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, X25_CLEAR_CALL, lcn)); |
| |
| return err; |
| } |
| |
| /*==================================================================== |
| * Send X.25 data packet. |
| *====================================================================*/ |
| |
| static int x25_send (sdla_t* card, int lcn, int qdm, int len, void* buf) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| unsigned char cmd; |
| |
| if (card->u.x.LAPB_hdlc) |
| cmd = X25_HDLC_WRITE; |
| else |
| cmd = X25_WRITE; |
| |
| do |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| memcpy(mbox->data, buf, len); |
| mbox->cmd.length = len; |
| mbox->cmd.lcn = lcn; |
| |
| if (card->u.x.LAPB_hdlc){ |
| mbox->cmd.pf = qdm; |
| }else{ |
| mbox->cmd.qdm = qdm; |
| } |
| |
| mbox->cmd.command = cmd; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && x25_error(card, err, cmd , lcn)); |
| |
| |
| /* If buffers are busy the return code for LAPB HDLC is |
| * 1. The above functions are looking for return code |
| * of X25RES_NOT_READY if busy. */ |
| |
| if (card->u.x.LAPB_hdlc && err == 1){ |
| err = X25RES_NOT_READY; |
| } |
| |
| return err; |
| } |
| |
| /*==================================================================== |
| * Fetch X.25 asynchronous events. |
| *===================================================================*/ |
| |
| static int x25_fetch_events (sdla_t* card) |
| { |
| TX25Status* status = card->flags; |
| TX25Mbox* mbox = card->mbox; |
| int err = 0; |
| |
| if (status->gflags & 0x20) |
| { |
| memset(&mbox->cmd, 0, sizeof(TX25Cmd)); |
| mbox->cmd.command = X25_IS_DATA_AVAILABLE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err) x25_error(card, err, X25_IS_DATA_AVAILABLE, 0); |
| } |
| return err; |
| } |
| |
| /*==================================================================== |
| * X.25 asynchronous event/error handler. |
| * This routine is called each time interface command returns |
| * non-zero return code to handle X.25 asynchronous events and |
| * common errors. Return non-zero to repeat command or zero to |
| * cancel it. |
| * |
| * Notes: |
| * 1. This function may be called recursively, as handling some of the |
| * asynchronous events (e.g. call request) requires execution of the |
| * interface command(s) that, in turn, may also return asynchronous |
| * events. To avoid re-entrancy problems we copy mailbox to dynamically |
| * allocated memory before processing events. |
| *====================================================================*/ |
| |
| static int x25_error (sdla_t* card, int err, int cmd, int lcn) |
| { |
| int retry = 1; |
| unsigned dlen = ((TX25Mbox*)card->mbox)->cmd.length; |
| TX25Mbox* mb; |
| |
| mb = kmalloc(sizeof(TX25Mbox) + dlen, GFP_ATOMIC); |
| if (mb == NULL) |
| { |
| printk(KERN_ERR "%s: x25_error() out of memory!\n", |
| card->devname); |
| return 0; |
| } |
| memcpy(mb, card->mbox, sizeof(TX25Mbox) + dlen); |
| switch (err){ |
| |
| case X25RES_ASYNC_PACKET: /* X.25 asynchronous packet was received */ |
| |
| mb->data[dlen] = '\0'; |
| |
| switch (mb->cmd.pktType & 0x7F){ |
| |
| case ASE_CALL_RQST: /* incoming call */ |
| retry = incoming_call(card, cmd, lcn, mb); |
| break; |
| |
| case ASE_CALL_ACCEPTED: /* connected */ |
| retry = call_accepted(card, cmd, lcn, mb); |
| break; |
| |
| case ASE_CLEAR_RQST: /* call clear request */ |
| retry = call_cleared(card, cmd, lcn, mb); |
| break; |
| |
| case ASE_RESET_RQST: /* reset request */ |
| printk(KERN_INFO "%s: X.25 reset request on LCN %d! " |
| "Cause:0x%02X Diagn:0x%02X\n", |
| card->devname, mb->cmd.lcn, mb->cmd.cause, |
| mb->cmd.diagn); |
| api_oob_event (card,mb); |
| break; |
| |
| case ASE_RESTART_RQST: /* restart request */ |
| retry = restart_event(card, cmd, lcn, mb); |
| break; |
| |
| case ASE_CLEAR_CONFRM: |
| if (clear_confirm_event (card,mb)) |
| break; |
| |
| /* I use the goto statement here so if |
| * somebody inserts code between the |
| * case and default, we will not have |
| * ghost problems */ |
| |
| goto dflt_1; |
| |
| default: |
| dflt_1: |
| printk(KERN_INFO "%s: X.25 event 0x%02X on LCN %d! " |
| "Cause:0x%02X Diagn:0x%02X\n", |
| card->devname, mb->cmd.pktType, |
| mb->cmd.lcn, mb->cmd.cause, mb->cmd.diagn); |
| } |
| break; |
| |
| case X25RES_PROTO_VIOLATION: /* X.25 protocol violation indication */ |
| |
| /* Bug Fix: Mar 14 2000 |
| * The Protocol violation error conditions were |
| * not handled previously */ |
| |
| switch (mb->cmd.pktType & 0x7F){ |
| |
| case PVE_CLEAR_RQST: /* Clear request */ |
| retry = call_cleared(card, cmd, lcn, mb); |
| break; |
| |
| case PVE_RESET_RQST: /* Reset request */ |
| printk(KERN_INFO "%s: X.25 reset request on LCN %d! " |
| "Cause:0x%02X Diagn:0x%02X\n", |
| card->devname, mb->cmd.lcn, mb->cmd.cause, |
| mb->cmd.diagn); |
| api_oob_event (card,mb); |
| break; |
| |
| case PVE_RESTART_RQST: /* Restart request */ |
| retry = restart_event(card, cmd, lcn, mb); |
| break; |
| |
| default : |
| printk(KERN_INFO |
| "%s: X.25 protocol violation on LCN %d! " |
| "Packet:0x%02X Cause:0x%02X Diagn:0x%02X\n", |
| card->devname, mb->cmd.lcn, |
| mb->cmd.pktType & 0x7F, mb->cmd.cause, mb->cmd.diagn); |
| api_oob_event(card,mb); |
| } |
| break; |
| |
| case 0x42: /* X.25 timeout */ |
| retry = timeout_event(card, cmd, lcn, mb); |
| break; |
| |
| case 0x43: /* X.25 retry limit exceeded */ |
| printk(KERN_INFO |
| "%s: exceeded X.25 retry limit on LCN %d! " |
| "Packet:0x%02X Diagn:0x%02X\n", card->devname, |
| mb->cmd.lcn, mb->cmd.pktType, mb->cmd.diagn) |
| ; |
| break; |
| |
| case 0x08: /* modem failure */ |
| #ifndef MODEM_NOT_LOG |
| printk(KERN_INFO "%s: modem failure!\n", card->devname); |
| #endif /* MODEM_NOT_LOG */ |
| api_oob_event(card,mb); |
| break; |
| |
| case 0x09: /* N2 retry limit */ |
| printk(KERN_INFO "%s: exceeded HDLC retry limit!\n", |
| card->devname); |
| api_oob_event(card,mb); |
| break; |
| |
| case 0x06: /* unnumbered frame was received while in ABM */ |
| printk(KERN_INFO "%s: received Unnumbered frame 0x%02X!\n", |
| card->devname, mb->data[0]); |
| api_oob_event(card,mb); |
| break; |
| |
| case CMD_TIMEOUT: |
| printk(KERN_ERR "%s: command 0x%02X timed out!\n", |
| card->devname, cmd) |
| ; |
| retry = 0; /* abort command */ |
| break; |
| |
| case X25RES_NOT_READY: |
| retry = 1; |
| break; |
| |
| case 0x01: |
| if (card->u.x.LAPB_hdlc) |
| break; |
| |
| if (mb->cmd.command == 0x16) |
| break; |
| /* I use the goto statement here so if |
| * somebody inserts code between the |
| * case and default, we will not have |
| * ghost problems */ |
| goto dflt_2; |
| |
| default: |
| dflt_2: |
| printk(KERN_INFO "%s: command 0x%02X returned 0x%02X! Lcn %i\n", |
| card->devname, cmd, err, mb->cmd.lcn) |
| ; |
| retry = 0; /* abort command */ |
| } |
| kfree(mb); |
| return retry; |
| } |
| |
| /*==================================================================== |
| * X.25 Asynchronous Event Handlers |
| * These functions are called by the x25_error() and should return 0, if |
| * the command resulting in the asynchronous event must be aborted. |
| *====================================================================*/ |
| |
| |
| |
| /*==================================================================== |
| *Handle X.25 incoming call request. |
| * RFC 1356 establishes the following rules: |
| * 1. The first octet in the Call User Data (CUD) field of the call |
| * request packet contains NLPID identifying protocol encapsulation |
| * 2. Calls MUST NOT be accepted unless router supports requested |
| * protocol encapsulation. |
| * 3. A diagnostic code 249 defined by ISO/IEC 8208 may be used |
| * when clearing a call because protocol encapsulation is not |
| * supported. |
| * 4. If an incoming call is received while a call request is |
| * pending (i.e. call collision has occurred), the incoming call |
| * shall be rejected and call request shall be retried. |
| *====================================================================*/ |
| |
| static int incoming_call (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) |
| { |
| struct wan_device* wandev = &card->wandev; |
| int new_lcn = mb->cmd.lcn; |
| struct net_device* dev = get_dev_by_lcn(wandev, new_lcn); |
| x25_channel_t* chan = NULL; |
| int accept = 0; /* set to '1' if o.k. to accept call */ |
| unsigned int user_data; |
| x25_call_info_t* info; |
| |
| /* Make sure there is no call collision */ |
| if (dev != NULL) |
| { |
| printk(KERN_INFO |
| "%s: X.25 incoming call collision on LCN %d!\n", |
| card->devname, new_lcn); |
| |
| x25_clear_call(card, new_lcn, 0, 0); |
| return 1; |
| } |
| |
| /* Make sure D bit is not set in call request */ |
| //FIXME: THIS IS NOT TURE !!!! TAKE IT OUT |
| // if (mb->cmd.qdm & 0x02) |
| // { |
| // printk(KERN_INFO |
| // "%s: X.25 incoming call on LCN %d with D-bit set!\n", |
| // card->devname, new_lcn); |
| // |
| // x25_clear_call(card, new_lcn, 0, 0); |
| // return 1; |
| // } |
| |
| /* Parse call request data */ |
| info = kmalloc(sizeof(x25_call_info_t), GFP_ATOMIC); |
| if (info == NULL) |
| { |
| printk(KERN_ERR |
| "%s: not enough memory to parse X.25 incoming call " |
| "on LCN %d!\n", card->devname, new_lcn); |
| x25_clear_call(card, new_lcn, 0, 0); |
| return 1; |
| } |
| |
| parse_call_info(mb->data, info); |
| |
| if (card->u.x.logging) |
| printk(KERN_INFO "\n%s: X.25 incoming call on LCN %d!\n", |
| card->devname, new_lcn); |
| |
| /* Conver the first two ASCII characters into an |
| * interger. Used to check the incoming protocol |
| */ |
| user_data = hex_to_uint(info->user,2); |
| |
| /* Find available channel */ |
| for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) { |
| chan = dev->priv; |
| |
| if (chan->common.usedby == API) |
| continue; |
| |
| if (!chan->common.svc || (chan->common.state != WAN_DISCONNECTED)) |
| continue; |
| |
| if (user_data == NLPID_IP && chan->protocol != htons(ETH_P_IP)){ |
| printk(KERN_INFO "IP packet but configured for IPX : %x, %x\n", |
| htons(chan->protocol), info->user[0]); |
| continue; |
| } |
| |
| if (user_data == NLPID_SNAP && chan->protocol != htons(ETH_P_IPX)){ |
| printk(KERN_INFO "IPX packet but configured for IP: %x\n", |
| htons(chan->protocol)); |
| continue; |
| } |
| if (strcmp(info->src, chan->addr) == 0) |
| break; |
| |
| /* If just an '@' is specified, accept all incoming calls */ |
| if (strcmp(chan->addr, "") == 0) |
| break; |
| } |
| |
| if (dev == NULL){ |
| |
| /* If the call is not for any WANPIPE interfaces |
| * check to see if there is an API listening queue |
| * waiting for data. If there is send the packet |
| * up the stack. |
| */ |
| if (card->sk != NULL && card->func != NULL){ |
| if (api_incoming_call(card,mb,new_lcn)){ |
| x25_clear_call(card, new_lcn, 0, 0); |
| } |
| accept = 0; |
| }else{ |
| printk(KERN_INFO "%s: no channels available!\n", |
| card->devname); |
| |
| x25_clear_call(card, new_lcn, 0, 0); |
| } |
| |
| }else if (info->nuser == 0){ |
| |
| printk(KERN_INFO |
| "%s: no user data in incoming call on LCN %d!\n", |
| card->devname, new_lcn) |
| ; |
| x25_clear_call(card, new_lcn, 0, 0); |
| |
| }else switch (info->user[0]){ |
| |
| case 0: /* multiplexed */ |
| chan->protocol = htons(0); |
| accept = 1; |
| break; |
| |
| case NLPID_IP: /* IP datagrams */ |
| accept = 1; |
| break; |
| |
| case NLPID_SNAP: /* IPX datagrams */ |
| accept = 1; |
| break; |
| |
| default: |
| printk(KERN_INFO |
| "%s: unsupported NLPID 0x%02X in incoming call " |
| "on LCN %d!\n", card->devname, info->user[0], new_lcn); |
| x25_clear_call(card, new_lcn, 0, 249); |
| } |
| |
| if (accept && (x25_accept_call(card, new_lcn, 0) == CMD_OK)){ |
| |
| bind_lcn_to_dev (card, chan->dev, new_lcn); |
| |
| if (x25_get_chan_conf(card, chan) == CMD_OK) |
| set_chan_state(dev, WAN_CONNECTED); |
| else |
| x25_clear_call(card, new_lcn, 0, 0); |
| } |
| kfree(info); |
| return 1; |
| } |
| |
| /*==================================================================== |
| * Handle accepted call. |
| *====================================================================*/ |
| |
| static int call_accepted (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) |
| { |
| unsigned new_lcn = mb->cmd.lcn; |
| struct net_device* dev = find_channel(card, new_lcn); |
| x25_channel_t* chan; |
| |
| if (dev == NULL){ |
| printk(KERN_INFO |
| "%s: clearing orphaned connection on LCN %d!\n", |
| card->devname, new_lcn); |
| x25_clear_call(card, new_lcn, 0, 0); |
| return 1; |
| } |
| |
| if (card->u.x.logging) |
| printk(KERN_INFO "%s: X.25 call accepted on Dev %s and LCN %d!\n", |
| card->devname, dev->name, new_lcn); |
| |
| /* Get channel configuration and notify router */ |
| chan = dev->priv; |
| if (x25_get_chan_conf(card, chan) != CMD_OK) |
| { |
| x25_clear_call(card, new_lcn, 0, 0); |
| return 1; |
| } |
| |
| set_chan_state(dev, WAN_CONNECTED); |
| |
| if (chan->common.usedby == API){ |
| send_delayed_cmd_result(card,dev,mb); |
| bind_lcn_to_dev (card, dev, new_lcn); |
| } |
| |
| return 1; |
| } |
| |
| /*==================================================================== |
| * Handle cleared call. |
| *====================================================================*/ |
| |
| static int call_cleared (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) |
| { |
| unsigned new_lcn = mb->cmd.lcn; |
| struct net_device* dev = find_channel(card, new_lcn); |
| x25_channel_t *chan; |
| unsigned char old_state; |
| |
| if (card->u.x.logging){ |
| printk(KERN_INFO "%s: X.25 clear request on LCN %d! Cause:0x%02X " |
| "Diagn:0x%02X\n", |
| card->devname, new_lcn, mb->cmd.cause, mb->cmd.diagn); |
| } |
| |
| if (dev == NULL){ |
| printk(KERN_INFO "%s: X.25 clear request : No device for clear\n", |
| card->devname); |
| return 1; |
| } |
| |
| chan=dev->priv; |
| |
| old_state = chan->common.state; |
| |
| set_chan_state(dev, WAN_DISCONNECTED); |
| |
| if (chan->common.usedby == API){ |
| |
| switch (old_state){ |
| |
| case WAN_CONNECTING: |
| send_delayed_cmd_result(card,dev,mb); |
| break; |
| case WAN_CONNECTED: |
| send_oob_msg(card,dev,mb); |
| break; |
| } |
| } |
| |
| return ((cmd == X25_WRITE) && (lcn == new_lcn)) ? 0 : 1; |
| } |
| |
| /*==================================================================== |
| * Handle X.25 restart event. |
| *====================================================================*/ |
| |
| static int restart_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) |
| { |
| struct wan_device* wandev = &card->wandev; |
| struct net_device* dev; |
| x25_channel_t *chan; |
| unsigned char old_state; |
| |
| printk(KERN_INFO |
| "%s: X.25 restart request! Cause:0x%02X Diagn:0x%02X\n", |
| card->devname, mb->cmd.cause, mb->cmd.diagn); |
| |
| /* down all logical channels */ |
| for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) { |
| chan=dev->priv; |
| old_state = chan->common.state; |
| |
| set_chan_state(dev, WAN_DISCONNECTED); |
| |
| if (chan->common.usedby == API){ |
| switch (old_state){ |
| |
| case WAN_CONNECTING: |
| send_delayed_cmd_result(card,dev,mb); |
| break; |
| case WAN_CONNECTED: |
| send_oob_msg(card,dev,mb); |
| break; |
| } |
| } |
| } |
| return (cmd == X25_WRITE) ? 0 : 1; |
| } |
| |
| /*==================================================================== |
| * Handle timeout event. |
| *====================================================================*/ |
| |
| static int timeout_event (sdla_t* card, int cmd, int lcn, TX25Mbox* mb) |
| { |
| unsigned new_lcn = mb->cmd.lcn; |
| |
| if (mb->cmd.pktType == 0x05) /* call request time out */ |
| { |
| struct net_device* dev = find_channel(card,new_lcn); |
| |
| printk(KERN_INFO "%s: X.25 call timed timeout on LCN %d!\n", |
| card->devname, new_lcn); |
| |
| if (dev){ |
| x25_channel_t *chan = dev->priv; |
| set_chan_state(dev, WAN_DISCONNECTED); |
| |
| if (chan->common.usedby == API){ |
| send_delayed_cmd_result(card,dev,card->mbox); |
| } |
| } |
| }else{ |
| printk(KERN_INFO "%s: X.25 packet 0x%02X timeout on LCN %d!\n", |
| card->devname, mb->cmd.pktType, new_lcn); |
| } |
| return 1; |
| } |
| |
| /* |
| * Miscellaneous |
| */ |
| |
| /*==================================================================== |
| * Establish physical connection. |
| * o open HDLC and raise DTR |
| * |
| * Return: 0 connection established |
| * 1 connection is in progress |
| * <0 error |
| *===================================================================*/ |
| |
| static int connect (sdla_t* card) |
| { |
| TX25Status* status = card->flags; |
| |
| if (x25_open_hdlc(card) || x25_setup_hdlc(card)) |
| return -EIO; |
| |
| wanpipe_set_state(card, WAN_CONNECTING); |
| |
| x25_set_intr_mode(card, INTR_ON_TIMER); |
| status->imask &= ~INTR_ON_TIMER; |
| |
| return 1; |
| } |
| |
| /* |
| * Tear down physical connection. |
| * o close HDLC link |
| * o drop DTR |
| * |
| * Return: 0 |
| * <0 error |
| */ |
| |
| static int disconnect (sdla_t* card) |
| { |
| wanpipe_set_state(card, WAN_DISCONNECTED); |
| x25_set_intr_mode(card, INTR_ON_TIMER); /* disable all interrupt except timer */ |
| x25_close_hdlc(card); /* close HDLC link */ |
| x25_set_dtr(card, 0); /* drop DTR */ |
| return 0; |
| } |
| |
| /* |
| * Find network device by its channel number. |
| */ |
| |
| static struct net_device* get_dev_by_lcn(struct wan_device* wandev, |
| unsigned lcn) |
| { |
| struct net_device* dev; |
| |
| for (dev = wandev->dev; dev; dev = *((struct net_device **)dev->priv)) |
| if (((x25_channel_t*)dev->priv)->common.lcn == lcn) |
| break; |
| return dev; |
| } |
| |
| /* |
| * Initiate connection on the logical channel. |
| * o for PVC we just get channel configuration |
| * o for SVCs place an X.25 call |
| * |
| * Return: 0 connected |
| * >0 connection in progress |
| * <0 failure |
| */ |
| |
| static int chan_connect(struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| |
| if (chan->common.svc && chan->common.usedby == WANPIPE){ |
| if (!chan->addr[0]){ |
| printk(KERN_INFO "%s: No Destination Address\n", |
| card->devname); |
| return -EINVAL; /* no destination address */ |
| } |
| printk(KERN_INFO "%s: placing X.25 call to %s ...\n", |
| card->devname, chan->addr); |
| |
| if (x25_place_call(card, chan) != CMD_OK) |
| return -EIO; |
| |
| set_chan_state(dev, WAN_CONNECTING); |
| return 1; |
| }else{ |
| if (x25_get_chan_conf(card, chan) != CMD_OK) |
| return -EIO; |
| |
| set_chan_state(dev, WAN_CONNECTED); |
| } |
| return 0; |
| } |
| |
| /* |
| * Disconnect logical channel. |
| * o if SVC then clear X.25 call |
| */ |
| |
| static int chan_disc(struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| |
| if (chan->common.svc){ |
| x25_clear_call(chan->card, chan->common.lcn, 0, 0); |
| |
| /* For API we disconnect on clear |
| * confirmation. |
| */ |
| if (chan->common.usedby == API) |
| return 0; |
| } |
| |
| set_chan_state(dev, WAN_DISCONNECTED); |
| |
| return 0; |
| } |
| |
| /* |
| * Set logical channel state. |
| */ |
| |
| static void set_chan_state(struct net_device* dev, int state) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| unsigned long flags; |
| |
| save_flags(flags); |
| cli(); |
| if (chan->common.state != state) |
| { |
| switch (state) |
| { |
| case WAN_CONNECTED: |
| if (card->u.x.logging){ |
| printk (KERN_INFO |
| "%s: interface %s connected, lcn %i !\n", |
| card->devname, dev->name,chan->common.lcn); |
| } |
| *(unsigned short*)dev->dev_addr = htons(chan->common.lcn); |
| chan->i_timeout_sofar = jiffies; |
| |
| /* LAPB is PVC Based */ |
| if (card->u.x.LAPB_hdlc) |
| chan->common.svc=0; |
| break; |
| |
| case WAN_CONNECTING: |
| if (card->u.x.logging){ |
| printk (KERN_INFO |
| "%s: interface %s connecting, lcn %i ...\n", |
| card->devname, dev->name, chan->common.lcn); |
| } |
| break; |
| |
| case WAN_DISCONNECTED: |
| if (card->u.x.logging){ |
| printk (KERN_INFO |
| "%s: interface %s disconnected, lcn %i !\n", |
| card->devname, dev->name,chan->common.lcn); |
| } |
| atomic_set(&chan->common.disconnect,0); |
| |
| if (chan->common.svc) { |
| *(unsigned short*)dev->dev_addr = 0; |
| card->u.x.svc_to_dev_map[(chan->common.lcn%X25_MAX_CHAN)]=NULL; |
| chan->common.lcn = 0; |
| } |
| |
| if (chan->transmit_length){ |
| chan->transmit_length=0; |
| atomic_set(&chan->common.driver_busy,0); |
| chan->tx_offset=0; |
| if (netif_queue_stopped(dev)){ |
| netif_wake_queue(dev); |
| } |
| } |
| atomic_set(&chan->common.command,0); |
| break; |
| |
| case WAN_DISCONNECTING: |
| if (card->u.x.logging){ |
| printk (KERN_INFO |
| "\n%s: interface %s disconnecting, lcn %i ...\n", |
| card->devname, dev->name,chan->common.lcn); |
| } |
| atomic_set(&chan->common.disconnect,0); |
| break; |
| } |
| chan->common.state = state; |
| } |
| chan->state_tick = jiffies; |
| restore_flags(flags); |
| } |
| |
| /* |
| * Send packet on a logical channel. |
| * When this function is called, tx_skb field of the channel data |
| * space points to the transmit socket buffer. When transmission |
| * is complete, release socket buffer and reset 'tbusy' flag. |
| * |
| * Return: 0 - transmission complete |
| * 1 - busy |
| * |
| * Notes: |
| * 1. If packet length is greater than MTU for this channel, we'll fragment |
| * the packet into 'complete sequence' using M-bit. |
| * 2. When transmission is complete, an event notification should be issued |
| * to the router. |
| */ |
| |
| static int chan_send(struct net_device* dev, void* buff, unsigned data_len, |
| unsigned char tx_intr) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| TX25Status* status = card->flags; |
| unsigned len=0, qdm=0, res=0, orig_len = 0; |
| void *data; |
| |
| /* Check to see if channel is ready */ |
| if ((!(status->cflags[chan->ch_idx] & 0x40) && !card->u.x.LAPB_hdlc) || |
| !(*card->u.x.hdlc_buf_status & 0x40)){ |
| |
| if (!tx_intr){ |
| setup_for_delayed_transmit (dev, buff, data_len); |
| return 0; |
| }else{ |
| /* By returning 0 to tx_intr the packet will be dropped */ |
| ++card->wandev.stats.tx_dropped; |
| ++chan->ifstats.tx_dropped; |
| printk(KERN_INFO "%s: ERROR, Tx intr could not send, dropping %s:\n", |
| card->devname,dev->name); |
| ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; |
| return 0; |
| } |
| } |
| |
| if (chan->common.usedby == API){ |
| /* Remove the API Header */ |
| x25api_hdr_t *api_data = (x25api_hdr_t *)buff; |
| |
| /* Set the qdm bits from the packet header |
| * User has the option to set the qdm bits |
| */ |
| qdm = api_data->qdm; |
| |
| orig_len = len = data_len - sizeof(x25api_hdr_t); |
| data = (unsigned char*)buff + sizeof(x25api_hdr_t); |
| }else{ |
| data = buff; |
| orig_len = len = data_len; |
| } |
| |
| if (tx_intr){ |
| /* We are in tx_intr, minus the tx_offset from |
| * the total length. The tx_offset part of the |
| * data has already been sent. Also, move the |
| * data pointer to proper offset location. |
| */ |
| len -= chan->tx_offset; |
| data = (unsigned char*)data + chan->tx_offset; |
| } |
| |
| /* Check if the packet length is greater than MTU |
| * If YES: Cut the len to MTU and set the M bit |
| */ |
| if (len > chan->tx_pkt_size && !card->u.x.LAPB_hdlc){ |
| len = chan->tx_pkt_size; |
| qdm |= M_BIT; |
| } |
| |
| |
| /* Pass only first three bits of the qdm byte to the send |
| * routine. In case user sets any other bit which might |
| * cause errors. |
| */ |
| |
| switch(x25_send(card, chan->common.lcn, (qdm&0x07), len, data)){ |
| case 0x00: /* success */ |
| chan->i_timeout_sofar = jiffies; |
| |
| dev->trans_start=jiffies; |
| |
| if ((qdm & M_BIT) && !card->u.x.LAPB_hdlc){ |
| if (!tx_intr){ |
| /* The M bit was set, which means that part of the |
| * packet has been sent. Copy the packet into a buffer |
| * and set the offset to len, so on next tx_inter |
| * the packet will be sent using the below offset. |
| */ |
| chan->tx_offset += len; |
| |
| ++chan->ifstats.tx_packets; |
| chan->ifstats.tx_bytes += len; |
| |
| if (chan->tx_offset < orig_len){ |
| setup_for_delayed_transmit (dev, buff, data_len); |
| } |
| res=0; |
| }else{ |
| /* We are already in tx_inter, thus data is already |
| * in the buffer. Update the offset and wait for |
| * next tx_intr. We add on to the offset, since data can |
| * be X number of times larger than max data size. |
| */ |
| ++chan->ifstats.tx_packets; |
| chan->ifstats.tx_bytes += len; |
| |
| ++chan->if_send_stat.if_send_bfr_passed_to_adptr; |
| chan->tx_offset += len; |
| |
| /* The user can set the qdm bit as well. |
| * If the entire packet was sent and qdm is still |
| * set, than it's the user who has set the M bit. In that, |
| * case indicate that the packet was send by returning |
| * 0 and wait for a new packet. Otherwise, wait for next |
| * tx interrupt to send the rest of the packet */ |
| |
| if (chan->tx_offset < orig_len){ |
| res=1; |
| }else{ |
| res=0; |
| } |
| } |
| }else{ |
| ++chan->ifstats.tx_packets; |
| chan->ifstats.tx_bytes += len; |
| ++chan->if_send_stat.if_send_bfr_passed_to_adptr; |
| res=0; |
| } |
| break; |
| |
| case 0x33: /* Tx busy */ |
| if (tx_intr){ |
| printk(KERN_INFO "%s: Tx_intr: Big Error dropping packet %s\n", |
| card->devname,dev->name); |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; |
| res=0; |
| }else{ |
| DBG_PRINTK(KERN_INFO |
| "%s: Send: Big Error should have tx: storring %s\n", |
| card->devname,dev->name); |
| setup_for_delayed_transmit (dev, buff, data_len); |
| res=1; |
| } |
| break; |
| |
| default: /* failure */ |
| ++chan->ifstats.tx_errors; |
| if (tx_intr){ |
| printk(KERN_INFO "%s: Tx_intr: Failure to send, dropping %s\n", |
| card->devname,dev->name); |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| ++chan->if_send_stat.if_send_bfr_not_passed_to_adptr; |
| res=0; |
| }else{ |
| DBG_PRINTK(KERN_INFO "%s: Send: Failure to send !!!, storing %s\n", |
| card->devname,dev->name); |
| setup_for_delayed_transmit (dev, buff, data_len); |
| res=1; |
| } |
| break; |
| } |
| return res; |
| } |
| |
| |
| /* |
| * Parse X.25 call request data and fill x25_call_info_t structure. |
| */ |
| |
| static void parse_call_info (unsigned char* str, x25_call_info_t* info) |
| { |
| memset(info, 0, sizeof(x25_call_info_t)); |
| for (; *str; ++str) |
| { |
| int i; |
| unsigned char ch; |
| |
| if (*str == '-') switch (str[1]) { |
| |
| /* Take minus 2 off the maximum size so that |
| * last byte is 0. This way we can use string |
| * manipulaton functions on call information. |
| */ |
| |
| case 'd': /* destination address */ |
| for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){ |
| ch = str[2+i]; |
| if (isspace(ch)) break; |
| info->dest[i] = ch; |
| } |
| break; |
| |
| case 's': /* source address */ |
| for (i = 0; i < (MAX_X25_ADDR_SIZE-2); ++i){ |
| ch = str[2+i]; |
| if (isspace(ch)) break; |
| info->src[i] = ch; |
| } |
| break; |
| |
| case 'u': /* user data */ |
| for (i = 0; i < (MAX_X25_DATA_SIZE-2); ++i){ |
| ch = str[2+i]; |
| if (isspace(ch)) break; |
| info->user[i] = ch; |
| } |
| info->nuser = i; |
| break; |
| |
| case 'f': /* facilities */ |
| for (i = 0; i < (MAX_X25_FACL_SIZE-2); ++i){ |
| ch = str[2+i]; |
| if (isspace(ch)) break; |
| info->facil[i] = ch; |
| } |
| info->nfacil = i; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Convert line speed in bps to a number used by S502 code. |
| */ |
| |
| static unsigned char bps_to_speed_code (unsigned long bps) |
| { |
| unsigned char number; |
| |
| if (bps <= 1200) number = 0x01; |
| else if (bps <= 2400) number = 0x02; |
| else if (bps <= 4800) number = 0x03; |
| else if (bps <= 9600) number = 0x04; |
| else if (bps <= 19200) number = 0x05; |
| else if (bps <= 38400) number = 0x06; |
| else if (bps <= 45000) number = 0x07; |
| else if (bps <= 56000) number = 0x08; |
| else if (bps <= 64000) number = 0x09; |
| else if (bps <= 74000) number = 0x0A; |
| else if (bps <= 112000) number = 0x0B; |
| else if (bps <= 128000) number = 0x0C; |
| else number = 0x0D; |
| |
| return number; |
| } |
| |
| /* |
| * Convert decimal string to unsigned integer. |
| * If len != 0 then only 'len' characters of the string are converted. |
| */ |
| |
| static unsigned int dec_to_uint (unsigned char* str, int len) |
| { |
| unsigned val; |
| |
| if (!len) |
| len = strlen(str); |
| |
| for (val = 0; len && is_digit(*str); ++str, --len) |
| val = (val * 10) + (*str - (unsigned)'0'); |
| |
| return val; |
| } |
| |
| /* |
| * Convert hex string to unsigned integer. |
| * If len != 0 then only 'len' characters of the string are conferted. |
| */ |
| |
| static unsigned int hex_to_uint (unsigned char* str, int len) |
| { |
| unsigned val, ch; |
| |
| if (!len) |
| len = strlen(str); |
| |
| for (val = 0; len; ++str, --len) |
| { |
| ch = *str; |
| if (is_digit(ch)) |
| val = (val << 4) + (ch - (unsigned)'0'); |
| else if (is_hex_digit(ch)) |
| val = (val << 4) + ((ch & 0xDF) - (unsigned)'A' + 10); |
| else break; |
| } |
| return val; |
| } |
| |
| |
| static int handle_IPXWAN(unsigned char *sendpacket, char *devname, unsigned char enable_IPX, unsigned long network_number, unsigned short proto) |
| { |
| int i; |
| |
| if( proto == ETH_P_IPX) { |
| /* It's an IPX packet */ |
| if(!enable_IPX) { |
| /* Return 1 so we don't pass it up the stack. */ |
| return 1; |
| } |
| } else { |
| /* It's not IPX so pass it up the stack.*/ |
| return 0; |
| } |
| |
| if( sendpacket[16] == 0x90 && |
| sendpacket[17] == 0x04) |
| { |
| /* It's IPXWAN */ |
| |
| if( sendpacket[2] == 0x02 && |
| sendpacket[34] == 0x00) |
| { |
| /* It's a timer request packet */ |
| printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n",devname); |
| |
| /* Go through the routing options and answer no to every |
| * option except Unnumbered RIP/SAP |
| */ |
| for(i = 41; sendpacket[i] == 0x00; i += 5) |
| { |
| /* 0x02 is the option for Unnumbered RIP/SAP */ |
| if( sendpacket[i + 4] != 0x02) |
| { |
| sendpacket[i + 1] = 0; |
| } |
| } |
| |
| /* Skip over the extended Node ID option */ |
| if( sendpacket[i] == 0x04 ) |
| { |
| i += 8; |
| } |
| |
| /* We also want to turn off all header compression opt. */ |
| for(; sendpacket[i] == 0x80 ;) |
| { |
| sendpacket[i + 1] = 0; |
| i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4; |
| } |
| |
| /* Set the packet type to timer response */ |
| sendpacket[34] = 0x01; |
| |
| printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n",devname); |
| } |
| else if( sendpacket[34] == 0x02 ) |
| { |
| /* This is an information request packet */ |
| printk(KERN_INFO "%s: Received IPXWAN Information Request packet\n",devname); |
| |
| /* Set the packet type to information response */ |
| sendpacket[34] = 0x03; |
| |
| /* Set the router name */ |
| sendpacket[51] = 'X'; |
| sendpacket[52] = 'T'; |
| sendpacket[53] = 'P'; |
| sendpacket[54] = 'I'; |
| sendpacket[55] = 'P'; |
| sendpacket[56] = 'E'; |
| sendpacket[57] = '-'; |
| sendpacket[58] = CVHexToAscii(network_number >> 28); |
| sendpacket[59] = CVHexToAscii((network_number & 0x0F000000)>> 24); |
| sendpacket[60] = CVHexToAscii((network_number & 0x00F00000)>> 20); |
| sendpacket[61] = CVHexToAscii((network_number & 0x000F0000)>> 16); |
| sendpacket[62] = CVHexToAscii((network_number & 0x0000F000)>> 12); |
| sendpacket[63] = CVHexToAscii((network_number & 0x00000F00)>> 8); |
| sendpacket[64] = CVHexToAscii((network_number & 0x000000F0)>> 4); |
| sendpacket[65] = CVHexToAscii(network_number & 0x0000000F); |
| for(i = 66; i < 99; i+= 1) |
| { |
| sendpacket[i] = 0; |
| } |
| |
| printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n",devname); |
| } |
| else |
| { |
| printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname); |
| return 0; |
| } |
| |
| /* Set the WNodeID to our network address */ |
| sendpacket[35] = (unsigned char)(network_number >> 24); |
| sendpacket[36] = (unsigned char)((network_number & 0x00FF0000) >> 16); |
| sendpacket[37] = (unsigned char)((network_number & 0x0000FF00) >> 8); |
| sendpacket[38] = (unsigned char)(network_number & 0x000000FF); |
| |
| return 1; |
| } else { |
| /*If we get here it's an IPX-data packet, so it'll get passed up the stack. |
| */ |
| /* switch the network numbers */ |
| switch_net_numbers(sendpacket, network_number, 1); |
| return 0; |
| } |
| } |
| |
| /* |
| * If incoming is 0 (outgoing)- if the net numbers is ours make it 0 |
| * if incoming is 1 - if the net number is 0 make it ours |
| */ |
| |
| static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming) |
| { |
| unsigned long pnetwork_number; |
| |
| pnetwork_number = (unsigned long)((sendpacket[6] << 24) + |
| (sendpacket[7] << 16) + (sendpacket[8] << 8) + |
| sendpacket[9]); |
| |
| |
| if (!incoming) { |
| /*If the destination network number is ours, make it 0 */ |
| if( pnetwork_number == network_number) { |
| sendpacket[6] = sendpacket[7] = sendpacket[8] = |
| sendpacket[9] = 0x00; |
| } |
| } else { |
| /* If the incoming network is 0, make it ours */ |
| if( pnetwork_number == 0) { |
| sendpacket[6] = (unsigned char)(network_number >> 24); |
| sendpacket[7] = (unsigned char)((network_number & |
| 0x00FF0000) >> 16); |
| sendpacket[8] = (unsigned char)((network_number & |
| 0x0000FF00) >> 8); |
| sendpacket[9] = (unsigned char)(network_number & |
| 0x000000FF); |
| } |
| } |
| |
| |
| pnetwork_number = (unsigned long)((sendpacket[18] << 24) + |
| (sendpacket[19] << 16) + (sendpacket[20] << 8) + |
| sendpacket[21]); |
| |
| |
| if( !incoming ) { |
| /* If the source network is ours, make it 0 */ |
| if( pnetwork_number == network_number) { |
| sendpacket[18] = sendpacket[19] = sendpacket[20] = |
| sendpacket[21] = 0x00; |
| } |
| } else { |
| /* If the source network is 0, make it ours */ |
| if( pnetwork_number == 0 ) { |
| sendpacket[18] = (unsigned char)(network_number >> 24); |
| sendpacket[19] = (unsigned char)((network_number & |
| 0x00FF0000) >> 16); |
| sendpacket[20] = (unsigned char)((network_number & |
| 0x0000FF00) >> 8); |
| sendpacket[21] = (unsigned char)(network_number & |
| 0x000000FF); |
| } |
| } |
| } /* switch_net_numbers */ |
| |
| |
| |
| |
| /********************* X25API SPECIFIC FUNCTIONS ****************/ |
| |
| |
| /*=============================================================== |
| * find_channel |
| * |
| * Manages the lcn to device map. It increases performance |
| * because it eliminates the need to search through the link |
| * list for a device which is bounded to a specific lcn. |
| * |
| *===============================================================*/ |
| |
| |
| struct net_device *find_channel(sdla_t *card, unsigned lcn) |
| { |
| if (card->u.x.LAPB_hdlc){ |
| |
| return card->wandev.dev; |
| |
| }else{ |
| /* We don't know whether the incoming lcn |
| * is a PVC or an SVC channel. But we do know that |
| * the lcn cannot be for both the PVC and the SVC |
| * channel. |
| |
| * If the lcn number is greater or equal to 255, |
| * take the modulo 255 of that number. We only have |
| * 255 locations, thus higher numbers must be mapped |
| * to a number between 0 and 245. |
| |
| * We must separate pvc's and svc's since two don't |
| * have to be contiguous. Meaning pvc's can start |
| * from 1 to 10 and svc's can start from 256 to 266. |
| * But 256%255 is 1, i.e. CONFLICT. |
| */ |
| |
| |
| /* Highest LCN number must be less or equal to 4096 */ |
| if ((lcn <= MAX_LCN_NUM) && (lcn > 0)){ |
| |
| if (lcn < X25_MAX_CHAN){ |
| if (card->u.x.svc_to_dev_map[lcn]) |
| return card->u.x.svc_to_dev_map[lcn]; |
| |
| if (card->u.x.pvc_to_dev_map[lcn]) |
| return card->u.x.pvc_to_dev_map[lcn]; |
| |
| }else{ |
| int new_lcn = lcn%X25_MAX_CHAN; |
| if (card->u.x.svc_to_dev_map[new_lcn]) |
| return card->u.x.svc_to_dev_map[new_lcn]; |
| |
| if (card->u.x.pvc_to_dev_map[new_lcn]) |
| return card->u.x.pvc_to_dev_map[new_lcn]; |
| } |
| } |
| return NULL; |
| } |
| } |
| |
| void bind_lcn_to_dev(sdla_t *card, struct net_device *dev, unsigned lcn) |
| { |
| x25_channel_t *chan = dev->priv; |
| |
| /* Modulo the lcn number by X25_MAX_CHAN (255) |
| * because the lcn number can be greater than 255 |
| * |
| * We need to split svc and pvc since they don't have |
| * to be contigous. |
| */ |
| |
| if (chan->common.svc){ |
| card->u.x.svc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev; |
| }else{ |
| card->u.x.pvc_to_dev_map[(lcn % X25_MAX_CHAN)] = dev; |
| } |
| chan->common.lcn = lcn; |
| } |
| |
| |
| |
| /*=============================================================== |
| * x25api_bh |
| * |
| * |
| *==============================================================*/ |
| |
| static void x25api_bh(struct net_device* dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| struct sk_buff *skb; |
| |
| if (atomic_read(&chan->bh_buff_used) == 0){ |
| printk(KERN_INFO "%s: BH Buffer Empty in BH\n", |
| card->devname); |
| clear_bit(0, &chan->tq_working); |
| return; |
| } |
| |
| while (atomic_read(&chan->bh_buff_used)){ |
| |
| /* If the sock is in the process of unlinking the |
| * driver from the socket, we must get out. |
| * This never happends but is a sanity check. */ |
| if (test_bit(0,&chan->common.common_critical)){ |
| clear_bit(0, &chan->tq_working); |
| return; |
| } |
| |
| /* If LAPB HDLC, do not drop packets if socket is |
| * not connected. Let the buffer fill up and |
| * turn off rx interrupt */ |
| if (card->u.x.LAPB_hdlc){ |
| if (chan->common.sk == NULL || chan->common.func == NULL){ |
| clear_bit(0, &chan->tq_working); |
| return; |
| } |
| } |
| |
| skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb; |
| |
| if (skb == NULL){ |
| printk(KERN_INFO "%s: BH Skb empty for read %i\n", |
| card->devname,chan->bh_read); |
| }else{ |
| |
| if (chan->common.sk == NULL || chan->common.func == NULL){ |
| printk(KERN_INFO "%s: BH: Socket disconnected, dropping\n", |
| card->devname); |
| dev_kfree_skb_any(skb); |
| x25api_bh_cleanup(dev); |
| ++chan->ifstats.rx_dropped; |
| ++chan->rx_intr_stat.rx_intr_bfr_not_passed_to_stack; |
| continue; |
| } |
| |
| |
| if (chan->common.func(skb,dev,chan->common.sk) != 0){ |
| /* Sock full cannot send, queue us for another |
| * try |
| */ |
| printk(KERN_INFO "%s: BH: !!! Packet failed to send !!!!! \n", |
| card->devname); |
| atomic_set(&chan->common.receive_block,1); |
| return; |
| }else{ |
| x25api_bh_cleanup(dev); |
| ++chan->rx_intr_stat.rx_intr_bfr_passed_to_stack; |
| } |
| } |
| } |
| clear_bit(0, &chan->tq_working); |
| |
| return; |
| } |
| |
| /*=============================================================== |
| * x25api_bh_cleanup |
| * |
| * |
| *==============================================================*/ |
| |
| static int x25api_bh_cleanup(struct net_device *dev) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t *card = chan->card; |
| TX25Status* status = card->flags; |
| |
| |
| ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL; |
| |
| if (chan->bh_read == MAX_BH_BUFF){ |
| chan->bh_read=0; |
| }else{ |
| ++chan->bh_read; |
| } |
| |
| /* If the Receive interrupt was off, it means |
| * that we filled up our circular buffer. Check |
| * that we have space in the buffer. If so |
| * turn the RX interrupt back on. |
| */ |
| if (!(status->imask & INTR_ON_RX_FRAME)){ |
| if (atomic_read(&chan->bh_buff_used) < (MAX_BH_BUFF+1)){ |
| printk(KERN_INFO "%s: BH: Turning on the interrupt\n", |
| card->devname); |
| status->imask |= INTR_ON_RX_FRAME; |
| } |
| } |
| |
| atomic_dec(&chan->bh_buff_used); |
| return 0; |
| } |
| |
| |
| /*=============================================================== |
| * bh_enqueue |
| * |
| * |
| *==============================================================*/ |
| |
| static int bh_enqueue(struct net_device *dev, struct sk_buff *skb) |
| { |
| x25_channel_t* chan = dev->priv; |
| sdla_t *card = chan->card; |
| TX25Status* status = card->flags; |
| |
| if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ |
| printk(KERN_INFO "%s: Bottom half buffer FULL\n", |
| card->devname); |
| return 1; |
| } |
| |
| ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb; |
| |
| if (chan->bh_write == MAX_BH_BUFF){ |
| chan->bh_write=0; |
| }else{ |
| ++chan->bh_write; |
| } |
| |
| atomic_inc(&chan->bh_buff_used); |
| |
| if (atomic_read(&chan->bh_buff_used) == (MAX_BH_BUFF+1)){ |
| printk(KERN_INFO "%s: Buffer is now full, Turning off RX Intr\n", |
| card->devname); |
| status->imask &= ~INTR_ON_RX_FRAME; |
| } |
| |
| return 0; |
| } |
| |
| |
| /*=============================================================== |
| * timer_intr_cmd_exec |
| * |
| * Called by timer interrupt to execute a command |
| *===============================================================*/ |
| |
| static int timer_intr_cmd_exec (sdla_t* card) |
| { |
| struct net_device *dev; |
| unsigned char more_to_exec=0; |
| volatile x25_channel_t *chan=NULL; |
| int i=0,bad_cmd=0,err=0; |
| |
| if (card->u.x.cmd_dev == NULL){ |
| card->u.x.cmd_dev = card->wandev.dev; |
| } |
| |
| dev = card->u.x.cmd_dev; |
| |
| for (;;){ |
| |
| chan = dev->priv; |
| |
| if (atomic_read(&chan->common.command)){ |
| |
| bad_cmd = check_bad_command(card,dev); |
| |
| if ((!chan->common.mbox || atomic_read(&chan->common.disconnect)) && |
| !bad_cmd){ |
| |
| /* Socket has died or exited, We must bring the |
| * channel down before anybody else tries to |
| * use it */ |
| err = channel_disconnect(card,dev); |
| }else{ |
| err = execute_delayed_cmd(card, dev, |
| (mbox_cmd_t*)chan->common.mbox, |
| bad_cmd); |
| } |
| |
| switch (err){ |
| |
| case RETURN_RESULT: |
| |
| /* Return the result to the socket without |
| * delay. NO_WAIT Command */ |
| atomic_set(&chan->common.command,0); |
| if (atomic_read(&card->u.x.command_busy)) |
| atomic_set(&card->u.x.command_busy,0); |
| |
| send_delayed_cmd_result(card,dev,card->mbox); |
| |
| more_to_exec=0; |
| break; |
| case DELAY_RESULT: |
| |
| /* Wait for the remote to respond, before |
| * sending the result up to the socket. |
| * WAIT command */ |
| if (atomic_read(&card->u.x.command_busy)) |
| atomic_set(&card->u.x.command_busy,0); |
| |
| atomic_set(&chan->common.command,0); |
| more_to_exec=0; |
| break; |
| default: |
| |
| /* If command could not be executed for |
| * some reason (i.e return code 0x33 busy) |
| * set the more_to_exec bit which will |
| * indicate that this command must be exectued |
| * again during next timer interrupt |
| */ |
| more_to_exec=1; |
| if (atomic_read(&card->u.x.command_busy) == 0) |
| atomic_set(&card->u.x.command_busy,1); |
| break; |
| } |
| |
| bad_cmd=0; |
| |
| /* If flags is set, there are no hdlc buffers, |
| * thus, wait for the next pass and try the |
| * same command again. Otherwise, start searching |
| * from next device on the next pass. |
| */ |
| if (!more_to_exec){ |
| dev = move_dev_to_next(card,dev); |
| } |
| break; |
| }else{ |
| /* This device has nothing to execute, |
| * go to next. |
| */ |
| if (atomic_read(&card->u.x.command_busy)) |
| atomic_set(&card->u.x.command_busy,0); |
| dev = move_dev_to_next(card,dev); |
| } |
| |
| if (++i == card->u.x.no_dev){ |
| if (!more_to_exec){ |
| DBG_PRINTK(KERN_INFO "%s: Nothing to execute in Timer\n", |
| card->devname); |
| if (atomic_read(&card->u.x.command_busy)){ |
| atomic_set(&card->u.x.command_busy,0); |
| } |
| } |
| break; |
| } |
| |
| } //End of FOR |
| |
| card->u.x.cmd_dev = dev; |
| |
| if (more_to_exec){ |
| /* If more commands are pending, do not turn off timer |
| * interrupt */ |
| return 1; |
| }else{ |
| /* No more commands, turn off timer interrupt */ |
| return 0; |
| } |
| } |
| |
| /*=============================================================== |
| * execute_delayed_cmd |
| * |
| * Execute an API command which was passed down from the |
| * sock. Sock is very limited in which commands it can |
| * execute. Wait and No Wait commands are supported. |
| * Place Call, Clear Call and Reset wait commands, where |
| * Accept Call is a no_wait command. |
| * |
| *===============================================================*/ |
| |
| static int execute_delayed_cmd(sdla_t* card, struct net_device *dev, |
| mbox_cmd_t *usr_cmd, char bad_cmd) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int err; |
| x25_channel_t *chan = dev->priv; |
| int delay=RETURN_RESULT; |
| |
| if (!(*card->u.x.hdlc_buf_status & 0x40) && !bad_cmd){ |
| return TRY_CMD_AGAIN; |
| } |
| |
| /* This way a command is guaranteed to be executed for |
| * a specific lcn, the network interface is bound to. */ |
| usr_cmd->cmd.lcn = chan->common.lcn; |
| |
| |
| /* If channel is pvc, instead of place call |
| * run x25_channel configuration. If running LAPB HDLC |
| * enable communications. |
| */ |
| if ((!chan->common.svc) && (usr_cmd->cmd.command == X25_PLACE_CALL)){ |
| |
| if (card->u.x.LAPB_hdlc){ |
| DBG_PRINTK(KERN_INFO "LAPB: Connecting\n"); |
| connect(card); |
| set_chan_state(dev,WAN_CONNECTING); |
| return DELAY_RESULT; |
| }else{ |
| DBG_PRINTK(KERN_INFO "%s: PVC is CONNECTING\n",card->devname); |
| if (x25_get_chan_conf(card, chan) == CMD_OK){ |
| set_chan_state(dev, WAN_CONNECTED); |
| }else{ |
| set_chan_state(dev, WAN_DISCONNECTED); |
| } |
| return RETURN_RESULT; |
| } |
| } |
| |
| /* Copy the socket mbox command onto the board */ |
| |
| memcpy(&mbox->cmd, &usr_cmd->cmd, sizeof(TX25Cmd)); |
| if (usr_cmd->cmd.length){ |
| memcpy(mbox->data, usr_cmd->data, usr_cmd->cmd.length); |
| } |
| |
| /* Check if command is bad. We need to copy the cmd into |
| * the buffer regardless since we return the, mbox to |
| * the user */ |
| if (bad_cmd){ |
| mbox->cmd.result=0x01; |
| return RETURN_RESULT; |
| } |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| if (err != CMD_OK && err != X25RES_NOT_READY) |
| x25_error(card, err, usr_cmd->cmd.command, usr_cmd->cmd.lcn); |
| |
| if (mbox->cmd.result == X25RES_NOT_READY){ |
| return TRY_CMD_AGAIN; |
| } |
| |
| switch (mbox->cmd.command){ |
| |
| case X25_PLACE_CALL: |
| |
| switch (mbox->cmd.result){ |
| |
| case CMD_OK: |
| |
| /* Check if Place call is a wait command or a |
| * no wait command */ |
| if (atomic_read(&chan->common.command) & 0x80) |
| delay=RETURN_RESULT; |
| else |
| delay=DELAY_RESULT; |
| |
| |
| DBG_PRINTK(KERN_INFO "\n%s: PLACE CALL Binding dev %s to lcn %i\n", |
| card->devname,dev->name, mbox->cmd.lcn); |
| |
| bind_lcn_to_dev (card, dev, mbox->cmd.lcn); |
| set_chan_state(dev, WAN_CONNECTING); |
| break; |
| |
| |
| default: |
| delay=RETURN_RESULT; |
| set_chan_state(dev, WAN_DISCONNECTED); |
| break; |
| } |
| break; |
| |
| case X25_ACCEPT_CALL: |
| |
| switch (mbox->cmd.result){ |
| |
| case CMD_OK: |
| |
| DBG_PRINTK(KERN_INFO "\n%s: ACCEPT Binding dev %s to lcn %i\n", |
| card->devname,dev->name,mbox->cmd.lcn); |
| |
| bind_lcn_to_dev (card, dev, mbox->cmd.lcn); |
| |
| if (x25_get_chan_conf(card, chan) == CMD_OK){ |
| |
| set_chan_state(dev, WAN_CONNECTED); |
| delay=RETURN_RESULT; |
| |
| }else{ |
| if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){ |
| /* if clear is successful, wait for clear confirm |
| */ |
| delay=DELAY_RESULT; |
| }else{ |
| /* Do not change the state here. If we fail |
| * the accept the return code is send up |
| *the stack, which will ether retry |
| * or clear the call |
| */ |
| DBG_PRINTK(KERN_INFO |
| "%s: ACCEPT: STATE MAY BE CURRUPTED 2 !!!!!\n", |
| card->devname); |
| delay=RETURN_RESULT; |
| } |
| } |
| break; |
| |
| |
| case X25RES_ASYNC_PACKET: |
| delay=TRY_CMD_AGAIN; |
| break; |
| |
| default: |
| DBG_PRINTK(KERN_INFO "%s: ACCEPT FAILED\n",card->devname); |
| if (x25_clear_call(card, usr_cmd->cmd.lcn, 0, 0) == CMD_OK){ |
| delay=DELAY_RESULT; |
| }else{ |
| /* Do not change the state here. If we fail the accept. The |
| * return code is send up the stack, which will ether retry |
| * or clear the call */ |
| DBG_PRINTK(KERN_INFO |
| "%s: ACCEPT: STATE MAY BE CORRUPTED 1 !!!!!\n", |
| card->devname); |
| delay=RETURN_RESULT; |
| } |
| } |
| break; |
| |
| case X25_CLEAR_CALL: |
| |
| switch (mbox->cmd.result){ |
| |
| case CMD_OK: |
| DBG_PRINTK(KERN_INFO |
| "CALL CLEAR OK: Dev %s Mbox Lcn %i Chan Lcn %i\n", |
| dev->name,mbox->cmd.lcn,chan->common.lcn); |
| set_chan_state(dev, WAN_DISCONNECTING); |
| delay = DELAY_RESULT; |
| break; |
| |
| case X25RES_CHANNEL_IN_USE: |
| case X25RES_ASYNC_PACKET: |
| delay = TRY_CMD_AGAIN; |
| break; |
| |
| case X25RES_LINK_NOT_IN_ABM: |
| case X25RES_INVAL_LCN: |
| case X25RES_INVAL_STATE: |
| set_chan_state(dev, WAN_DISCONNECTED); |
| delay = RETURN_RESULT; |
| break; |
| |
| default: |
| /* If command did not execute because of user |
| * fault, do not change the state. This will |
| * signal the socket that clear command failed. |
| * User can retry or close the socket. |
| * When socket gets killed, it will set the |
| * chan->disconnect which will signal |
| * driver to clear the call */ |
| printk(KERN_INFO "%s: Clear Command Failed, Rc %x\n", |
| card->devname,mbox->cmd.command); |
| delay = RETURN_RESULT; |
| } |
| break; |
| } |
| |
| return delay; |
| } |
| |
| /*=============================================================== |
| * api_incoming_call |
| * |
| * Pass an incoming call request up the listening |
| * sock. If the API sock is not listening reject the |
| * call. |
| * |
| *===============================================================*/ |
| |
| static int api_incoming_call (sdla_t* card, TX25Mbox *mbox, int lcn) |
| { |
| struct sk_buff *skb; |
| int len = sizeof(TX25Cmd)+mbox->cmd.length; |
| |
| if (alloc_and_init_skb_buf(card, &skb, len)){ |
| printk(KERN_INFO "%s: API incoming call, no memory\n",card->devname); |
| return 1; |
| } |
| |
| memcpy(skb_put(skb,len),&mbox->cmd,len); |
| |
| skb->mac.raw = skb->data; |
| skb->protocol = htons(X25_PROT); |
| skb->pkt_type = WAN_PACKET_ASYNC; |
| |
| if (card->func(skb,card->sk) < 0){ |
| printk(KERN_INFO "%s: MAJOR ERROR: Failed to send up place call \n",card->devname); |
| dev_kfree_skb_any(skb); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /*=============================================================== |
| * send_delayed_cmd_result |
| * |
| * Wait commands like PLEACE CALL or CLEAR CALL must wait |
| * until the result arrives. This function passes |
| * the result to a waiting sock. |
| * |
| *===============================================================*/ |
| static void send_delayed_cmd_result(sdla_t *card, struct net_device *dev, |
| TX25Mbox* mbox) |
| { |
| x25_channel_t *chan = dev->priv; |
| mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox; |
| struct sk_buff *skb; |
| int len=sizeof(unsigned char); |
| |
| atomic_set(&chan->common.command,0); |
| |
| /* If the sock is in the process of unlinking the |
| * driver from the socket, we must get out. |
| * This never happends but is a sanity check. */ |
| if (test_bit(0,&chan->common.common_critical)){ |
| return; |
| } |
| |
| if (!usr_cmd || !chan->common.sk || !chan->common.func){ |
| DBG_PRINTK(KERN_INFO "Delay result: Sock not bounded sk: %u, func: %u, mbox: %u\n", |
| (unsigned int)chan->common.sk, |
| (unsigned int)chan->common.func, |
| (unsigned int)usr_cmd); |
| return; |
| } |
| |
| memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd)); |
| if (mbox->cmd.length > 0){ |
| memcpy(usr_cmd->data, mbox->data, mbox->cmd.length); |
| } |
| |
| if (alloc_and_init_skb_buf(card,&skb,len)){ |
| printk(KERN_INFO "Delay result: No sock buffers\n"); |
| return; |
| } |
| |
| memcpy(skb_put(skb,len),&mbox->cmd.command,len); |
| |
| skb->mac.raw = skb->data; |
| skb->pkt_type = WAN_PACKET_CMD; |
| |
| chan->common.func(skb,dev,chan->common.sk); |
| } |
| |
| /*=============================================================== |
| * clear_confirm_event |
| * |
| * Pass the clear confirmation event up the sock. The |
| * API will disconnect only after the clear confirmation |
| * has been received. |
| * |
| * Depending on the state, clear confirmation could |
| * be an OOB event, or a result of an API command. |
| *===============================================================*/ |
| |
| static int clear_confirm_event (sdla_t *card, TX25Mbox* mb) |
| { |
| struct net_device *dev; |
| x25_channel_t *chan; |
| unsigned char old_state; |
| |
| dev = find_channel(card,mb->cmd.lcn); |
| if (!dev){ |
| DBG_PRINTK(KERN_INFO "%s: *** GOT CLEAR BUT NO DEV %i\n", |
| card->devname,mb->cmd.lcn); |
| return 0; |
| } |
| |
| chan=dev->priv; |
| DBG_PRINTK(KERN_INFO "%s: GOT CLEAR CONFIRM %s: Mbox lcn %i Chan lcn %i\n", |
| card->devname, dev->name, mb->cmd.lcn, chan->common.lcn); |
| |
| /* If not API fall through to default. |
| * If API, send the result to a waiting |
| * socket. |
| */ |
| |
| old_state = chan->common.state; |
| set_chan_state(dev, WAN_DISCONNECTED); |
| |
| if (chan->common.usedby == API){ |
| switch (old_state) { |
| |
| case WAN_DISCONNECTING: |
| case WAN_CONNECTING: |
| send_delayed_cmd_result(card,dev,mb); |
| break; |
| case WAN_CONNECTED: |
| send_oob_msg(card,dev,mb); |
| break; |
| } |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /*=============================================================== |
| * send_oob_msg |
| * |
| * Construct an NEM Message and pass it up the connected |
| * sock. If the sock is not bounded discard the NEM. |
| * |
| *===============================================================*/ |
| |
| static void send_oob_msg(sdla_t *card, struct net_device *dev, TX25Mbox *mbox) |
| { |
| x25_channel_t *chan = dev->priv; |
| mbox_cmd_t *usr_cmd = (mbox_cmd_t *)chan->common.mbox; |
| struct sk_buff *skb; |
| int len=sizeof(x25api_hdr_t)+mbox->cmd.length; |
| x25api_t *api_hdr; |
| |
| /* If the sock is in the process of unlinking the |
| * driver from the socket, we must get out. |
| * This never happends but is a sanity check. */ |
| if (test_bit(0,&chan->common.common_critical)){ |
| return; |
| } |
| |
| if (!usr_cmd || !chan->common.sk || !chan->common.func){ |
| DBG_PRINTK(KERN_INFO "OOB MSG: Sock not bounded\n"); |
| return; |
| } |
| |
| memcpy(&usr_cmd->cmd, &mbox->cmd, sizeof(TX25Cmd)); |
| if (mbox->cmd.length > 0){ |
| memcpy(usr_cmd->data, mbox->data, mbox->cmd.length); |
| } |
| |
| if (alloc_and_init_skb_buf(card,&skb,len)){ |
| printk(KERN_INFO "%s: OOB MSG: No sock buffers\n",card->devname); |
| return; |
| } |
| |
| api_hdr = (x25api_t*)skb_put(skb,len); |
| api_hdr->hdr.pktType = mbox->cmd.pktType & 0x7F; |
| api_hdr->hdr.qdm = mbox->cmd.qdm; |
| api_hdr->hdr.cause = mbox->cmd.cause; |
| api_hdr->hdr.diagn = mbox->cmd.diagn; |
| api_hdr->hdr.length = mbox->cmd.length; |
| api_hdr->hdr.result = mbox->cmd.result; |
| api_hdr->hdr.lcn = mbox->cmd.lcn; |
| |
| if (mbox->cmd.length > 0){ |
| memcpy(api_hdr->data,mbox->data,mbox->cmd.length); |
| } |
| |
| skb->mac.raw = skb->data; |
| skb->pkt_type = WAN_PACKET_ERR; |
| |
| if (chan->common.func(skb,dev,chan->common.sk) < 0){ |
| if (bh_enqueue(dev,skb)){ |
| printk(KERN_INFO "%s: Dropping OOB MSG\n",card->devname); |
| dev_kfree_skb_any(skb); |
| } |
| } |
| |
| DBG_PRINTK(KERN_INFO "%s: OOB MSG OK, %s, lcn %i\n", |
| card->devname, dev->name, mbox->cmd.lcn); |
| } |
| |
| /*=============================================================== |
| * alloc_and_init_skb_buf |
| * |
| * Allocate and initialize an skb buffer. |
| * |
| *===============================================================*/ |
| |
| static int alloc_and_init_skb_buf (sdla_t *card, struct sk_buff **skb, int len) |
| { |
| struct sk_buff *new_skb = *skb; |
| |
| new_skb = dev_alloc_skb(len + X25_HRDHDR_SZ); |
| if (new_skb == NULL){ |
| printk(KERN_INFO "%s: no socket buffers available!\n", |
| card->devname); |
| return 1; |
| } |
| |
| if (skb_tailroom(new_skb) < len){ |
| /* No room for the packet. Call off the whole thing! */ |
| dev_kfree_skb_any(new_skb); |
| printk(KERN_INFO "%s: Listen: unexpectedly long packet sequence\n" |
| ,card->devname); |
| *skb = NULL; |
| return 1; |
| } |
| |
| *skb = new_skb; |
| return 0; |
| |
| } |
| |
| /*=============================================================== |
| * api_oob_event |
| * |
| * Send an OOB event up to the sock |
| * |
| *===============================================================*/ |
| |
| static void api_oob_event (sdla_t *card,TX25Mbox *mbox) |
| { |
| struct net_device *dev = find_channel(card, mbox->cmd.lcn); |
| x25_channel_t *chan; |
| |
| if (!dev) |
| return; |
| |
| chan=dev->priv; |
| |
| if (chan->common.usedby == API) |
| send_oob_msg(card,dev,mbox); |
| |
| } |
| |
| |
| |
| |
| static int channel_disconnect(sdla_t* card, struct net_device *dev) |
| { |
| |
| int err; |
| x25_channel_t *chan = dev->priv; |
| |
| DBG_PRINTK(KERN_INFO "%s: TIMER: %s, Device down disconnecting\n", |
| card->devname,dev->name); |
| |
| if (chan->common.svc){ |
| err = x25_clear_call(card,chan->common.lcn,0,0); |
| }else{ |
| /* If channel is PVC or LAPB HDLC, there is no call |
| * to be cleared, thus drop down to the default |
| * area |
| */ |
| err = 1; |
| } |
| |
| switch (err){ |
| |
| case X25RES_CHANNEL_IN_USE: |
| case X25RES_NOT_READY: |
| err = TRY_CMD_AGAIN; |
| break; |
| case CMD_OK: |
| DBG_PRINTK(KERN_INFO "CALL CLEAR OK: Dev %s Chan Lcn %i\n", |
| dev->name,chan->common.lcn); |
| |
| set_chan_state(dev,WAN_DISCONNECTING); |
| atomic_set(&chan->common.command,0); |
| err = DELAY_RESULT; |
| break; |
| default: |
| /* If LAPB HDLC protocol, bring the whole link down |
| * once the application terminates |
| */ |
| |
| set_chan_state(dev,WAN_DISCONNECTED); |
| |
| if (card->u.x.LAPB_hdlc){ |
| DBG_PRINTK(KERN_INFO "LAPB: Disconnecting Link\n"); |
| hdlc_link_down (card); |
| } |
| atomic_set(&chan->common.command,0); |
| err = RETURN_RESULT; |
| break; |
| } |
| |
| return err; |
| } |
| |
| static void hdlc_link_down (sdla_t *card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int retry = 5; |
| int err=0; |
| |
| do { |
| memset(mbox,0,sizeof(TX25Mbox)); |
| mbox->cmd.command = X25_HDLC_LINK_DISC; |
| mbox->cmd.length = 1; |
| mbox->data[0]=0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| } while (err && retry-- && x25_error(card, err, X25_HDLC_LINK_DISC, 0)); |
| |
| if (err) |
| printk(KERN_INFO "%s: Hdlc Link Down Failed %x\n",card->devname,err); |
| |
| disconnect (card); |
| |
| } |
| |
| static int check_bad_command(sdla_t* card, struct net_device *dev) |
| { |
| x25_channel_t *chan = dev->priv; |
| int bad_cmd = 0; |
| |
| switch (atomic_read(&chan->common.command)&0x7F){ |
| |
| case X25_PLACE_CALL: |
| if (chan->common.state != WAN_DISCONNECTED) |
| bad_cmd=1; |
| break; |
| case X25_CLEAR_CALL: |
| if (chan->common.state == WAN_DISCONNECTED) |
| bad_cmd=1; |
| break; |
| case X25_ACCEPT_CALL: |
| if (chan->common.state != WAN_CONNECTING) |
| bad_cmd=1; |
| break; |
| case X25_RESET: |
| if (chan->common.state != WAN_CONNECTED) |
| bad_cmd=1; |
| break; |
| default: |
| bad_cmd=1; |
| break; |
| } |
| |
| if (bad_cmd){ |
| printk(KERN_INFO "%s: Invalid State, BAD Command %x, dev %s, lcn %i, st %i\n", |
| card->devname,atomic_read(&chan->common.command),dev->name, |
| chan->common.lcn, chan->common.state); |
| } |
| |
| return bad_cmd; |
| } |
| |
| |
| |
| /*************************** XPIPEMON FUNCTIONS **************************/ |
| |
| /*============================================================================== |
| * Process UDP call of type XPIPE |
| */ |
| |
| static int process_udp_mgmt_pkt(sdla_t *card) |
| { |
| int c_retry = MAX_CMD_RETRY; |
| unsigned int len; |
| struct sk_buff *new_skb; |
| TX25Mbox *mbox = card->mbox; |
| int err; |
| int udp_mgmt_req_valid = 1; |
| struct net_device *dev; |
| x25_channel_t *chan; |
| unsigned short lcn; |
| struct timeval tv; |
| |
| |
| x25_udp_pkt_t *x25_udp_pkt; |
| x25_udp_pkt = (x25_udp_pkt_t *)card->u.x.udp_pkt_data; |
| |
| dev = card->u.x.udp_dev; |
| chan = dev->priv; |
| lcn = chan->common.lcn; |
| |
| switch(x25_udp_pkt->cblock.command) { |
| |
| /* XPIPE_ENABLE_TRACE */ |
| case XPIPE_ENABLE_TRACING: |
| |
| /* XPIPE_GET_TRACE_INFO */ |
| case XPIPE_GET_TRACE_INFO: |
| |
| /* SET FT1 MODE */ |
| case XPIPE_SET_FT1_MODE: |
| |
| if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) { |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_direction_err; |
| udp_mgmt_req_valid = 0; |
| break; |
| } |
| |
| /* XPIPE_FT1_READ_STATUS */ |
| case XPIPE_FT1_READ_STATUS: |
| |
| /* FT1 MONITOR STATUS */ |
| case XPIPE_FT1_STATUS_CTRL: |
| if(card->hw.fwid != SFID_X25_508) { |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_type_err; |
| udp_mgmt_req_valid = 0; |
| break; |
| } |
| default: |
| break; |
| } |
| |
| if(!udp_mgmt_req_valid) { |
| /* set length to 0 */ |
| x25_udp_pkt->cblock.length = 0; |
| /* set return code */ |
| x25_udp_pkt->cblock.result = (card->hw.fwid != SFID_X25_508) ? 0x1F : 0xCD; |
| |
| } else { |
| |
| switch (x25_udp_pkt->cblock.command) { |
| |
| |
| case XPIPE_FLUSH_DRIVER_STATS: |
| init_x25_channel_struct(chan); |
| init_global_statistics(card); |
| mbox->cmd.length = 0; |
| break; |
| |
| |
| case XPIPE_DRIVER_STAT_IFSEND: |
| memcpy(x25_udp_pkt->data, &chan->if_send_stat, sizeof(if_send_stat_t)); |
| mbox->cmd.length = sizeof(if_send_stat_t); |
| x25_udp_pkt->cblock.length = mbox->cmd.length; |
| break; |
| |
| case XPIPE_DRIVER_STAT_INTR: |
| memcpy(&x25_udp_pkt->data[0], &card->statistics, sizeof(global_stats_t)); |
| memcpy(&x25_udp_pkt->data[sizeof(global_stats_t)], |
| &chan->rx_intr_stat, sizeof(rx_intr_stat_t)); |
| |
| mbox->cmd.length = sizeof(global_stats_t) + |
| sizeof(rx_intr_stat_t); |
| x25_udp_pkt->cblock.length = mbox->cmd.length; |
| break; |
| |
| case XPIPE_DRIVER_STAT_GEN: |
| memcpy(x25_udp_pkt->data, |
| &chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err, |
| sizeof(pipe_mgmt_stat_t)); |
| |
| memcpy(&x25_udp_pkt->data[sizeof(pipe_mgmt_stat_t)], |
| &card->statistics, sizeof(global_stats_t)); |
| |
| x25_udp_pkt->cblock.result = 0; |
| x25_udp_pkt->cblock.length = sizeof(global_stats_t)+ |
| sizeof(rx_intr_stat_t); |
| mbox->cmd.length = x25_udp_pkt->cblock.length; |
| break; |
| |
| case XPIPE_ROUTER_UP_TIME: |
| do_gettimeofday(&tv); |
| chan->router_up_time = tv.tv_sec - chan->router_start_time; |
| *(unsigned long *)&x25_udp_pkt->data = chan->router_up_time; |
| x25_udp_pkt->cblock.length = mbox->cmd.length = 4; |
| x25_udp_pkt->cblock.result = 0; |
| break; |
| |
| default : |
| |
| do { |
| memcpy(&mbox->cmd, &x25_udp_pkt->cblock.command, sizeof(TX25Cmd)); |
| if(mbox->cmd.length){ |
| memcpy(&mbox->data, |
| (char *)x25_udp_pkt->data, |
| mbox->cmd.length); |
| } |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && c_retry-- && x25_error(card, err, mbox->cmd.command, 0)); |
| |
| |
| if ( err == CMD_OK || |
| (err == 1 && |
| (mbox->cmd.command == 0x06 || |
| mbox->cmd.command == 0x16) ) ){ |
| |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_OK; |
| } else { |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_cmnd_timeout; |
| } |
| |
| /* copy the result back to our buffer */ |
| memcpy(&x25_udp_pkt->cblock.command, &mbox->cmd, sizeof(TX25Cmd)); |
| |
| if(mbox->cmd.length) { |
| memcpy(&x25_udp_pkt->data, &mbox->data, mbox->cmd.length); |
| } |
| break; |
| |
| } //switch |
| |
| } |
| |
| /* Fill UDP TTL */ |
| |
| x25_udp_pkt->ip_pkt.ttl = card->wandev.ttl; |
| len = reply_udp(card->u.x.udp_pkt_data, mbox->cmd.length); |
| |
| |
| if(card->u.x.udp_pkt_src == UDP_PKT_FRM_NETWORK) { |
| |
| err = x25_send(card, lcn, 0, len, card->u.x.udp_pkt_data); |
| if (!err) |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_passed; |
| else |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_adptr_send_failed; |
| |
| } else { |
| |
| /* Allocate socket buffer */ |
| if((new_skb = dev_alloc_skb(len)) != NULL) { |
| void *buf; |
| |
| /* copy data into new_skb */ |
| buf = skb_put(new_skb, len); |
| memcpy(buf, card->u.x.udp_pkt_data, len); |
| |
| /* Decapsulate packet and pass it up the protocol |
| stack */ |
| new_skb->dev = dev; |
| |
| if (chan->common.usedby == API) |
| new_skb->protocol = htons(X25_PROT); |
| else |
| new_skb->protocol = htons(ETH_P_IP); |
| |
| new_skb->mac.raw = new_skb->data; |
| |
| netif_rx(new_skb); |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_passed_to_stack; |
| |
| } else { |
| ++chan->pipe_mgmt_stat.UDP_PIPE_mgmt_no_socket; |
| printk(KERN_INFO |
| "%s: UDP mgmt cmnd, no socket buffers available!\n", |
| card->devname); |
| } |
| } |
| |
| card->u.x.udp_pkt_lgth = 0; |
| |
| return 1; |
| } |
| |
| |
| /*============================================================================== |
| * Determine what type of UDP call it is. DRVSTATS or XPIPE8ND ? |
| */ |
| static int udp_pkt_type( struct sk_buff *skb, sdla_t* card ) |
| { |
| x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)skb->data; |
| |
| if((x25_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) && |
| (x25_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) && |
| (x25_udp_pkt->udp_pkt.udp_dst_port == ntohs(card->wandev.udp_port)) && |
| (x25_udp_pkt->wp_mgmt.request_reply == UDPMGMT_REQUEST)) { |
| |
| if(!strncmp(x25_udp_pkt->wp_mgmt.signature, |
| UDPMGMT_XPIPE_SIGNATURE, 8)){ |
| return UDP_XPIPE_TYPE; |
| }else{ |
| printk(KERN_INFO "%s: UDP Packet, Failed Signature !\n", |
| card->devname); |
| } |
| } |
| |
| return UDP_INVALID_TYPE; |
| } |
| |
| |
| /*============================================================================ |
| * Reply to UDP Management system. |
| * Return nothing. |
| */ |
| static int reply_udp( unsigned char *data, unsigned int mbox_len ) |
| { |
| unsigned short len, udp_length, temp, ip_length; |
| unsigned long ip_temp; |
| int even_bound = 0; |
| |
| |
| x25_udp_pkt_t *x25_udp_pkt = (x25_udp_pkt_t *)data; |
| |
| /* Set length of packet */ |
| len = sizeof(ip_pkt_t)+ |
| sizeof(udp_pkt_t)+ |
| sizeof(wp_mgmt_t)+ |
| sizeof(cblock_t)+ |
| mbox_len; |
| |
| |
| /* fill in UDP reply */ |
| x25_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY; |
| |
| /* fill in UDP length */ |
| udp_length = sizeof(udp_pkt_t)+ |
| sizeof(wp_mgmt_t)+ |
| sizeof(cblock_t)+ |
| mbox_len; |
| |
| |
| /* put it on an even boundary */ |
| if ( udp_length & 0x0001 ) { |
| udp_length += 1; |
| len += 1; |
| even_bound = 1; |
| } |
| |
| temp = (udp_length<<8)|(udp_length>>8); |
| x25_udp_pkt->udp_pkt.udp_length = temp; |
| |
| /* swap UDP ports */ |
| temp = x25_udp_pkt->udp_pkt.udp_src_port; |
| x25_udp_pkt->udp_pkt.udp_src_port = |
| x25_udp_pkt->udp_pkt.udp_dst_port; |
| x25_udp_pkt->udp_pkt.udp_dst_port = temp; |
| |
| |
| |
| /* add UDP pseudo header */ |
| temp = 0x1100; |
| *((unsigned short *) |
| (x25_udp_pkt->data+mbox_len+even_bound)) = temp; |
| temp = (udp_length<<8)|(udp_length>>8); |
| *((unsigned short *) |
| (x25_udp_pkt->data+mbox_len+even_bound+2)) = temp; |
| |
| /* calculate UDP checksum */ |
| x25_udp_pkt->udp_pkt.udp_checksum = 0; |
| |
| x25_udp_pkt->udp_pkt.udp_checksum = |
| calc_checksum(&data[UDP_OFFSET], udp_length+UDP_OFFSET); |
| |
| /* fill in IP length */ |
| ip_length = len; |
| temp = (ip_length<<8)|(ip_length>>8); |
| x25_udp_pkt->ip_pkt.total_length = temp; |
| |
| /* swap IP addresses */ |
| ip_temp = x25_udp_pkt->ip_pkt.ip_src_address; |
| x25_udp_pkt->ip_pkt.ip_src_address = |
| x25_udp_pkt->ip_pkt.ip_dst_address; |
| x25_udp_pkt->ip_pkt.ip_dst_address = ip_temp; |
| |
| |
| /* fill in IP checksum */ |
| x25_udp_pkt->ip_pkt.hdr_checksum = 0; |
| x25_udp_pkt->ip_pkt.hdr_checksum = calc_checksum(data, sizeof(ip_pkt_t)); |
| |
| return len; |
| } /* reply_udp */ |
| |
| unsigned short calc_checksum (char *data, int len) |
| { |
| unsigned short temp; |
| unsigned long sum=0; |
| int i; |
| |
| for( i = 0; i <len; i+=2 ) { |
| memcpy(&temp,&data[i],2); |
| sum += (unsigned long)temp; |
| } |
| |
| while (sum >> 16 ) { |
| sum = (sum & 0xffffUL) + (sum >> 16); |
| } |
| |
| temp = (unsigned short)sum; |
| temp = ~temp; |
| |
| if( temp == 0 ) |
| temp = 0xffff; |
| |
| return temp; |
| } |
| |
| /*============================================================================= |
| * Store a UDP management packet for later processing. |
| */ |
| |
| static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, |
| struct net_device *dev, struct sk_buff *skb, |
| int lcn) |
| { |
| int udp_pkt_stored = 0; |
| |
| if(!card->u.x.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){ |
| card->u.x.udp_pkt_lgth = skb->len; |
| card->u.x.udp_type = udp_type; |
| card->u.x.udp_pkt_src = udp_pkt_src; |
| card->u.x.udp_lcn = lcn; |
| card->u.x.udp_dev = dev; |
| memcpy(card->u.x.udp_pkt_data, skb->data, skb->len); |
| card->u.x.timer_int_enabled |= TMR_INT_ENABLED_UDP_PKT; |
| udp_pkt_stored = 1; |
| |
| }else{ |
| printk(KERN_INFO "%s: ERROR: UDP packet not stored for LCN %d\n", |
| card->devname,lcn); |
| } |
| |
| if(udp_pkt_src == UDP_PKT_FRM_STACK){ |
| dev_kfree_skb_any(skb); |
| }else{ |
| dev_kfree_skb_any(skb); |
| } |
| |
| return(udp_pkt_stored); |
| } |
| |
| |
| |
| /*============================================================================= |
| * Initial the ppp_private_area structure. |
| */ |
| static void init_x25_channel_struct( x25_channel_t *chan ) |
| { |
| memset(&chan->if_send_stat.if_send_entry,0,sizeof(if_send_stat_t)); |
| memset(&chan->rx_intr_stat.rx_intr_no_socket,0,sizeof(rx_intr_stat_t)); |
| memset(&chan->pipe_mgmt_stat.UDP_PIPE_mgmt_kmalloc_err,0,sizeof(pipe_mgmt_stat_t)); |
| } |
| |
| /*============================================================================ |
| * Initialize Global Statistics |
| */ |
| static void init_global_statistics( sdla_t *card ) |
| { |
| memset(&card->statistics.isr_entry,0,sizeof(global_stats_t)); |
| } |
| |
| |
| /*=============================================================== |
| * SMP Support |
| * ==============================================================*/ |
| |
| static void S508_S514_lock(sdla_t *card, unsigned long *smp_flags) |
| { |
| spin_lock_irqsave(&card->wandev.lock, *smp_flags); |
| } |
| static void S508_S514_unlock(sdla_t *card, unsigned long *smp_flags) |
| { |
| spin_unlock_irqrestore(&card->wandev.lock, *smp_flags); |
| } |
| |
| /*=============================================================== |
| * x25_timer_routine |
| * |
| * A more efficient polling routine. Each half a second |
| * queue a polling task. We want to do the polling in a |
| * task not timer, because timer runs in interrupt time. |
| * |
| * FIXME Polling should be rethinked. |
| *==============================================================*/ |
| |
| static void x25_timer_routine(unsigned long data) |
| { |
| sdla_t *card = (sdla_t*)data; |
| |
| if (!card->wandev.dev){ |
| printk(KERN_INFO "%s: Stopping the X25 Poll Timer: No Dev.\n", |
| card->devname); |
| return; |
| } |
| |
| if (card->open_cnt != card->u.x.num_of_ch){ |
| printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Interface down.\n", |
| card->devname); |
| return; |
| } |
| |
| if (test_bit(PERI_CRIT,&card->wandev.critical)){ |
| printk(KERN_INFO "%s: Stopping the X25 Poll Timer: Shutting down.\n", |
| card->devname); |
| return; |
| } |
| |
| if (!test_and_set_bit(POLL_CRIT,&card->wandev.critical)){ |
| trigger_x25_poll(card); |
| } |
| |
| card->u.x.x25_timer.expires=jiffies+(HZ>>1); |
| add_timer(&card->u.x.x25_timer); |
| return; |
| } |
| |
| void disable_comm_shutdown(sdla_t *card) |
| { |
| TX25Mbox* mbox = card->mbox; |
| int err; |
| |
| /* Turn of interrutps */ |
| mbox->data[0] = 0; |
| if (card->hw.fwid == SFID_X25_508){ |
| mbox->data[1] = card->hw.irq; |
| mbox->data[2] = 2; |
| mbox->cmd.length = 3; |
| }else { |
| mbox->cmd.length = 1; |
| } |
| mbox->cmd.command = X25_SET_INTERRUPT_MODE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err) |
| printk(KERN_INFO "INTERRUPT OFF FAIED %x\n",err); |
| |
| /* Bring down HDLC */ |
| mbox->cmd.command = X25_HDLC_LINK_CLOSE; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err) |
| printk(KERN_INFO "LINK CLOSED FAILED %x\n",err); |
| |
| |
| /* Brind down DTR */ |
| mbox->data[0] = 0; |
| mbox->data[2] = 0; |
| mbox->data[1] = 0x01; |
| mbox->cmd.length = 3; |
| mbox->cmd.command = X25_SET_GLOBAL_VARS; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err) |
| printk(KERN_INFO "DTR DOWN FAILED %x\n",err); |
| |
| } |
| |
| MODULE_LICENSE("GPL"); |
| |
| /****** End *****************************************************************/ |