| #include <linux/interrupt.h> |
| #include <linux/dmar.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hpet.h> |
| #include <linux/pci.h> |
| #include <linux/irq.h> |
| #include <linux/intel-iommu.h> |
| #include <linux/acpi.h> |
| #include <asm/io_apic.h> |
| #include <asm/smp.h> |
| #include <asm/cpu.h> |
| #include <asm/irq_remapping.h> |
| #include <asm/pci-direct.h> |
| #include <asm/msidef.h> |
| |
| #include "irq_remapping.h" |
| |
| struct ioapic_scope { |
| struct intel_iommu *iommu; |
| unsigned int id; |
| unsigned int bus; /* PCI bus number */ |
| unsigned int devfn; /* PCI devfn number */ |
| }; |
| |
| struct hpet_scope { |
| struct intel_iommu *iommu; |
| u8 id; |
| unsigned int bus; |
| unsigned int devfn; |
| }; |
| |
| #define IR_X2APIC_MODE(mode) (mode ? (1 << 11) : 0) |
| #define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8) |
| |
| static struct ioapic_scope ir_ioapic[MAX_IO_APICS]; |
| static struct hpet_scope ir_hpet[MAX_HPET_TBS]; |
| static int ir_ioapic_num, ir_hpet_num; |
| |
| static DEFINE_RAW_SPINLOCK(irq_2_ir_lock); |
| |
| static struct irq_2_iommu *irq_2_iommu(unsigned int irq) |
| { |
| struct irq_cfg *cfg = irq_get_chip_data(irq); |
| return cfg ? &cfg->irq_2_iommu : NULL; |
| } |
| |
| int get_irte(int irq, struct irte *entry) |
| { |
| struct irq_2_iommu *irq_iommu = irq_2_iommu(irq); |
| unsigned long flags; |
| int index; |
| |
| if (!entry || !irq_iommu) |
| return -1; |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| |
| index = irq_iommu->irte_index + irq_iommu->sub_handle; |
| *entry = *(irq_iommu->iommu->ir_table->base + index); |
| |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| return 0; |
| } |
| |
| static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count) |
| { |
| struct ir_table *table = iommu->ir_table; |
| struct irq_2_iommu *irq_iommu = irq_2_iommu(irq); |
| struct irq_cfg *cfg = irq_get_chip_data(irq); |
| u16 index, start_index; |
| unsigned int mask = 0; |
| unsigned long flags; |
| int i; |
| |
| if (!count || !irq_iommu) |
| return -1; |
| |
| /* |
| * start the IRTE search from index 0. |
| */ |
| index = start_index = 0; |
| |
| if (count > 1) { |
| count = __roundup_pow_of_two(count); |
| mask = ilog2(count); |
| } |
| |
| if (mask > ecap_max_handle_mask(iommu->ecap)) { |
| printk(KERN_ERR |
| "Requested mask %x exceeds the max invalidation handle" |
| " mask value %Lx\n", mask, |
| ecap_max_handle_mask(iommu->ecap)); |
| return -1; |
| } |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| do { |
| for (i = index; i < index + count; i++) |
| if (table->base[i].present) |
| break; |
| /* empty index found */ |
| if (i == index + count) |
| break; |
| |
| index = (index + count) % INTR_REMAP_TABLE_ENTRIES; |
| |
| if (index == start_index) { |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| printk(KERN_ERR "can't allocate an IRTE\n"); |
| return -1; |
| } |
| } while (1); |
| |
| for (i = index; i < index + count; i++) |
| table->base[i].present = 1; |
| |
| cfg->remapped = 1; |
| irq_iommu->iommu = iommu; |
| irq_iommu->irte_index = index; |
| irq_iommu->sub_handle = 0; |
| irq_iommu->irte_mask = mask; |
| |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| |
| return index; |
| } |
| |
| static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask) |
| { |
| struct qi_desc desc; |
| |
| desc.low = QI_IEC_IIDEX(index) | QI_IEC_TYPE | QI_IEC_IM(mask) |
| | QI_IEC_SELECTIVE; |
| desc.high = 0; |
| |
| return qi_submit_sync(&desc, iommu); |
| } |
| |
| static int map_irq_to_irte_handle(int irq, u16 *sub_handle) |
| { |
| struct irq_2_iommu *irq_iommu = irq_2_iommu(irq); |
| unsigned long flags; |
| int index; |
| |
| if (!irq_iommu) |
| return -1; |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| *sub_handle = irq_iommu->sub_handle; |
| index = irq_iommu->irte_index; |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| return index; |
| } |
| |
| static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle) |
| { |
| struct irq_2_iommu *irq_iommu = irq_2_iommu(irq); |
| struct irq_cfg *cfg = irq_get_chip_data(irq); |
| unsigned long flags; |
| |
| if (!irq_iommu) |
| return -1; |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| |
| cfg->remapped = 1; |
| irq_iommu->iommu = iommu; |
| irq_iommu->irte_index = index; |
| irq_iommu->sub_handle = subhandle; |
| irq_iommu->irte_mask = 0; |
| |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| |
| return 0; |
| } |
| |
| static int modify_irte(int irq, struct irte *irte_modified) |
| { |
| struct irq_2_iommu *irq_iommu = irq_2_iommu(irq); |
| struct intel_iommu *iommu; |
| unsigned long flags; |
| struct irte *irte; |
| int rc, index; |
| |
| if (!irq_iommu) |
| return -1; |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| |
| iommu = irq_iommu->iommu; |
| |
| index = irq_iommu->irte_index + irq_iommu->sub_handle; |
| irte = &iommu->ir_table->base[index]; |
| |
| set_64bit(&irte->low, irte_modified->low); |
| set_64bit(&irte->high, irte_modified->high); |
| __iommu_flush_cache(iommu, irte, sizeof(*irte)); |
| |
| rc = qi_flush_iec(iommu, index, 0); |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| |
| return rc; |
| } |
| |
| static struct intel_iommu *map_hpet_to_ir(u8 hpet_id) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_HPET_TBS; i++) |
| if (ir_hpet[i].id == hpet_id) |
| return ir_hpet[i].iommu; |
| return NULL; |
| } |
| |
| static struct intel_iommu *map_ioapic_to_ir(int apic) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_IO_APICS; i++) |
| if (ir_ioapic[i].id == apic) |
| return ir_ioapic[i].iommu; |
| return NULL; |
| } |
| |
| static struct intel_iommu *map_dev_to_ir(struct pci_dev *dev) |
| { |
| struct dmar_drhd_unit *drhd; |
| |
| drhd = dmar_find_matched_drhd_unit(dev); |
| if (!drhd) |
| return NULL; |
| |
| return drhd->iommu; |
| } |
| |
| static int clear_entries(struct irq_2_iommu *irq_iommu) |
| { |
| struct irte *start, *entry, *end; |
| struct intel_iommu *iommu; |
| int index; |
| |
| if (irq_iommu->sub_handle) |
| return 0; |
| |
| iommu = irq_iommu->iommu; |
| index = irq_iommu->irte_index + irq_iommu->sub_handle; |
| |
| start = iommu->ir_table->base + index; |
| end = start + (1 << irq_iommu->irte_mask); |
| |
| for (entry = start; entry < end; entry++) { |
| set_64bit(&entry->low, 0); |
| set_64bit(&entry->high, 0); |
| } |
| |
| return qi_flush_iec(iommu, index, irq_iommu->irte_mask); |
| } |
| |
| static int free_irte(int irq) |
| { |
| struct irq_2_iommu *irq_iommu = irq_2_iommu(irq); |
| unsigned long flags; |
| int rc; |
| |
| if (!irq_iommu) |
| return -1; |
| |
| raw_spin_lock_irqsave(&irq_2_ir_lock, flags); |
| |
| rc = clear_entries(irq_iommu); |
| |
| irq_iommu->iommu = NULL; |
| irq_iommu->irte_index = 0; |
| irq_iommu->sub_handle = 0; |
| irq_iommu->irte_mask = 0; |
| |
| raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags); |
| |
| return rc; |
| } |
| |
| /* |
| * source validation type |
| */ |
| #define SVT_NO_VERIFY 0x0 /* no verification is required */ |
| #define SVT_VERIFY_SID_SQ 0x1 /* verify using SID and SQ fields */ |
| #define SVT_VERIFY_BUS 0x2 /* verify bus of request-id */ |
| |
| /* |
| * source-id qualifier |
| */ |
| #define SQ_ALL_16 0x0 /* verify all 16 bits of request-id */ |
| #define SQ_13_IGNORE_1 0x1 /* verify most significant 13 bits, ignore |
| * the third least significant bit |
| */ |
| #define SQ_13_IGNORE_2 0x2 /* verify most significant 13 bits, ignore |
| * the second and third least significant bits |
| */ |
| #define SQ_13_IGNORE_3 0x3 /* verify most significant 13 bits, ignore |
| * the least three significant bits |
| */ |
| |
| /* |
| * set SVT, SQ and SID fields of irte to verify |
| * source ids of interrupt requests |
| */ |
| static void set_irte_sid(struct irte *irte, unsigned int svt, |
| unsigned int sq, unsigned int sid) |
| { |
| if (disable_sourceid_checking) |
| svt = SVT_NO_VERIFY; |
| irte->svt = svt; |
| irte->sq = sq; |
| irte->sid = sid; |
| } |
| |
| static int set_ioapic_sid(struct irte *irte, int apic) |
| { |
| int i; |
| u16 sid = 0; |
| |
| if (!irte) |
| return -1; |
| |
| for (i = 0; i < MAX_IO_APICS; i++) { |
| if (ir_ioapic[i].id == apic) { |
| sid = (ir_ioapic[i].bus << 8) | ir_ioapic[i].devfn; |
| break; |
| } |
| } |
| |
| if (sid == 0) { |
| pr_warning("Failed to set source-id of IOAPIC (%d)\n", apic); |
| return -1; |
| } |
| |
| set_irte_sid(irte, 1, 0, sid); |
| |
| return 0; |
| } |
| |
| static int set_hpet_sid(struct irte *irte, u8 id) |
| { |
| int i; |
| u16 sid = 0; |
| |
| if (!irte) |
| return -1; |
| |
| for (i = 0; i < MAX_HPET_TBS; i++) { |
| if (ir_hpet[i].id == id) { |
| sid = (ir_hpet[i].bus << 8) | ir_hpet[i].devfn; |
| break; |
| } |
| } |
| |
| if (sid == 0) { |
| pr_warning("Failed to set source-id of HPET block (%d)\n", id); |
| return -1; |
| } |
| |
| /* |
| * Should really use SQ_ALL_16. Some platforms are broken. |
| * While we figure out the right quirks for these broken platforms, use |
| * SQ_13_IGNORE_3 for now. |
| */ |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_13_IGNORE_3, sid); |
| |
| return 0; |
| } |
| |
| static int set_msi_sid(struct irte *irte, struct pci_dev *dev) |
| { |
| struct pci_dev *bridge; |
| |
| if (!irte || !dev) |
| return -1; |
| |
| /* PCIe device or Root Complex integrated PCI device */ |
| if (pci_is_pcie(dev) || !dev->bus->parent) { |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, |
| (dev->bus->number << 8) | dev->devfn); |
| return 0; |
| } |
| |
| bridge = pci_find_upstream_pcie_bridge(dev); |
| if (bridge) { |
| if (pci_is_pcie(bridge))/* this is a PCIe-to-PCI/PCIX bridge */ |
| set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, |
| (bridge->bus->number << 8) | dev->bus->number); |
| else /* this is a legacy PCI bridge */ |
| set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, |
| (bridge->bus->number << 8) | bridge->devfn); |
| } |
| |
| return 0; |
| } |
| |
| static void iommu_set_irq_remapping(struct intel_iommu *iommu, int mode) |
| { |
| u64 addr; |
| u32 sts; |
| unsigned long flags; |
| |
| addr = virt_to_phys((void *)iommu->ir_table->base); |
| |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); |
| |
| dmar_writeq(iommu->reg + DMAR_IRTA_REG, |
| (addr) | IR_X2APIC_MODE(mode) | INTR_REMAP_TABLE_REG_SIZE); |
| |
| /* Set interrupt-remapping table pointer */ |
| iommu->gcmd |= DMA_GCMD_SIRTP; |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); |
| |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, |
| readl, (sts & DMA_GSTS_IRTPS), sts); |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); |
| |
| /* |
| * global invalidation of interrupt entry cache before enabling |
| * interrupt-remapping. |
| */ |
| qi_global_iec(iommu); |
| |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); |
| |
| /* Enable interrupt-remapping */ |
| iommu->gcmd |= DMA_GCMD_IRE; |
| iommu->gcmd &= ~DMA_GCMD_CFI; /* Block compatibility-format MSIs */ |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); |
| |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, |
| readl, (sts & DMA_GSTS_IRES), sts); |
| |
| /* |
| * With CFI clear in the Global Command register, we should be |
| * protected from dangerous (i.e. compatibility) interrupts |
| * regardless of x2apic status. Check just to be sure. |
| */ |
| if (sts & DMA_GSTS_CFIS) |
| WARN(1, KERN_WARNING |
| "Compatibility-format IRQs enabled despite intr remapping;\n" |
| "you are vulnerable to IRQ injection.\n"); |
| |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); |
| } |
| |
| |
| static int intel_setup_irq_remapping(struct intel_iommu *iommu, int mode) |
| { |
| struct ir_table *ir_table; |
| struct page *pages; |
| |
| ir_table = iommu->ir_table = kzalloc(sizeof(struct ir_table), |
| GFP_ATOMIC); |
| |
| if (!iommu->ir_table) |
| return -ENOMEM; |
| |
| pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO, |
| INTR_REMAP_PAGE_ORDER); |
| |
| if (!pages) { |
| printk(KERN_ERR "failed to allocate pages of order %d\n", |
| INTR_REMAP_PAGE_ORDER); |
| kfree(iommu->ir_table); |
| return -ENOMEM; |
| } |
| |
| ir_table->base = page_address(pages); |
| |
| iommu_set_irq_remapping(iommu, mode); |
| return 0; |
| } |
| |
| /* |
| * Disable Interrupt Remapping. |
| */ |
| static void iommu_disable_irq_remapping(struct intel_iommu *iommu) |
| { |
| unsigned long flags; |
| u32 sts; |
| |
| if (!ecap_ir_support(iommu->ecap)) |
| return; |
| |
| /* |
| * global invalidation of interrupt entry cache before disabling |
| * interrupt-remapping. |
| */ |
| qi_global_iec(iommu); |
| |
| raw_spin_lock_irqsave(&iommu->register_lock, flags); |
| |
| sts = dmar_readq(iommu->reg + DMAR_GSTS_REG); |
| if (!(sts & DMA_GSTS_IRES)) |
| goto end; |
| |
| iommu->gcmd &= ~DMA_GCMD_IRE; |
| writel(iommu->gcmd, iommu->reg + DMAR_GCMD_REG); |
| |
| IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, |
| readl, !(sts & DMA_GSTS_IRES), sts); |
| |
| end: |
| raw_spin_unlock_irqrestore(&iommu->register_lock, flags); |
| } |
| |
| static int __init dmar_x2apic_optout(void) |
| { |
| struct acpi_table_dmar *dmar; |
| dmar = (struct acpi_table_dmar *)dmar_tbl; |
| if (!dmar || no_x2apic_optout) |
| return 0; |
| return dmar->flags & DMAR_X2APIC_OPT_OUT; |
| } |
| |
| static int __init intel_irq_remapping_supported(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| |
| if (disable_irq_remap) |
| return 0; |
| if (irq_remap_broken) { |
| printk(KERN_WARNING |
| "This system BIOS has enabled interrupt remapping\n" |
| "on a chipset that contains an erratum making that\n" |
| "feature unstable. To maintain system stability\n" |
| "interrupt remapping is being disabled. Please\n" |
| "contact your BIOS vendor for an update\n"); |
| add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); |
| disable_irq_remap = 1; |
| return 0; |
| } |
| |
| if (!dmar_ir_support()) |
| return 0; |
| |
| for_each_drhd_unit(drhd) { |
| struct intel_iommu *iommu = drhd->iommu; |
| |
| if (!ecap_ir_support(iommu->ecap)) |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int __init intel_enable_irq_remapping(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| bool x2apic_present; |
| int setup = 0; |
| int eim = 0; |
| |
| x2apic_present = x2apic_supported(); |
| |
| if (parse_ioapics_under_ir() != 1) { |
| printk(KERN_INFO "Not enable interrupt remapping\n"); |
| goto error; |
| } |
| |
| if (x2apic_present) { |
| eim = !dmar_x2apic_optout(); |
| if (!eim) |
| printk(KERN_WARNING |
| "Your BIOS is broken and requested that x2apic be disabled.\n" |
| "This will slightly decrease performance.\n" |
| "Use 'intremap=no_x2apic_optout' to override BIOS request.\n"); |
| } |
| |
| for_each_drhd_unit(drhd) { |
| struct intel_iommu *iommu = drhd->iommu; |
| |
| /* |
| * If the queued invalidation is already initialized, |
| * shouldn't disable it. |
| */ |
| if (iommu->qi) |
| continue; |
| |
| /* |
| * Clear previous faults. |
| */ |
| dmar_fault(-1, iommu); |
| |
| /* |
| * Disable intr remapping and queued invalidation, if already |
| * enabled prior to OS handover. |
| */ |
| iommu_disable_irq_remapping(iommu); |
| |
| dmar_disable_qi(iommu); |
| } |
| |
| /* |
| * check for the Interrupt-remapping support |
| */ |
| for_each_drhd_unit(drhd) { |
| struct intel_iommu *iommu = drhd->iommu; |
| |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| if (eim && !ecap_eim_support(iommu->ecap)) { |
| printk(KERN_INFO "DRHD %Lx: EIM not supported by DRHD, " |
| " ecap %Lx\n", drhd->reg_base_addr, iommu->ecap); |
| goto error; |
| } |
| } |
| |
| /* |
| * Enable queued invalidation for all the DRHD's. |
| */ |
| for_each_drhd_unit(drhd) { |
| int ret; |
| struct intel_iommu *iommu = drhd->iommu; |
| ret = dmar_enable_qi(iommu); |
| |
| if (ret) { |
| printk(KERN_ERR "DRHD %Lx: failed to enable queued, " |
| " invalidation, ecap %Lx, ret %d\n", |
| drhd->reg_base_addr, iommu->ecap, ret); |
| goto error; |
| } |
| } |
| |
| /* |
| * Setup Interrupt-remapping for all the DRHD's now. |
| */ |
| for_each_drhd_unit(drhd) { |
| struct intel_iommu *iommu = drhd->iommu; |
| |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| if (intel_setup_irq_remapping(iommu, eim)) |
| goto error; |
| |
| setup = 1; |
| } |
| |
| if (!setup) |
| goto error; |
| |
| irq_remapping_enabled = 1; |
| |
| /* |
| * VT-d has a different layout for IO-APIC entries when |
| * interrupt remapping is enabled. So it needs a special routine |
| * to print IO-APIC entries for debugging purposes too. |
| */ |
| x86_io_apic_ops.print_entries = intel_ir_io_apic_print_entries; |
| |
| pr_info("Enabled IRQ remapping in %s mode\n", eim ? "x2apic" : "xapic"); |
| |
| return eim ? IRQ_REMAP_X2APIC_MODE : IRQ_REMAP_XAPIC_MODE; |
| |
| error: |
| /* |
| * handle error condition gracefully here! |
| */ |
| |
| if (x2apic_present) |
| pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n"); |
| |
| return -1; |
| } |
| |
| static void ir_parse_one_hpet_scope(struct acpi_dmar_device_scope *scope, |
| struct intel_iommu *iommu) |
| { |
| struct acpi_dmar_pci_path *path; |
| u8 bus; |
| int count; |
| |
| bus = scope->bus; |
| path = (struct acpi_dmar_pci_path *)(scope + 1); |
| count = (scope->length - sizeof(struct acpi_dmar_device_scope)) |
| / sizeof(struct acpi_dmar_pci_path); |
| |
| while (--count > 0) { |
| /* |
| * Access PCI directly due to the PCI |
| * subsystem isn't initialized yet. |
| */ |
| bus = read_pci_config_byte(bus, path->device, path->function, |
| PCI_SECONDARY_BUS); |
| path++; |
| } |
| ir_hpet[ir_hpet_num].bus = bus; |
| ir_hpet[ir_hpet_num].devfn = PCI_DEVFN(path->device, path->function); |
| ir_hpet[ir_hpet_num].iommu = iommu; |
| ir_hpet[ir_hpet_num].id = scope->enumeration_id; |
| ir_hpet_num++; |
| } |
| |
| static void ir_parse_one_ioapic_scope(struct acpi_dmar_device_scope *scope, |
| struct intel_iommu *iommu) |
| { |
| struct acpi_dmar_pci_path *path; |
| u8 bus; |
| int count; |
| |
| bus = scope->bus; |
| path = (struct acpi_dmar_pci_path *)(scope + 1); |
| count = (scope->length - sizeof(struct acpi_dmar_device_scope)) |
| / sizeof(struct acpi_dmar_pci_path); |
| |
| while (--count > 0) { |
| /* |
| * Access PCI directly due to the PCI |
| * subsystem isn't initialized yet. |
| */ |
| bus = read_pci_config_byte(bus, path->device, path->function, |
| PCI_SECONDARY_BUS); |
| path++; |
| } |
| |
| ir_ioapic[ir_ioapic_num].bus = bus; |
| ir_ioapic[ir_ioapic_num].devfn = PCI_DEVFN(path->device, path->function); |
| ir_ioapic[ir_ioapic_num].iommu = iommu; |
| ir_ioapic[ir_ioapic_num].id = scope->enumeration_id; |
| ir_ioapic_num++; |
| } |
| |
| static int ir_parse_ioapic_hpet_scope(struct acpi_dmar_header *header, |
| struct intel_iommu *iommu) |
| { |
| struct acpi_dmar_hardware_unit *drhd; |
| struct acpi_dmar_device_scope *scope; |
| void *start, *end; |
| |
| drhd = (struct acpi_dmar_hardware_unit *)header; |
| |
| start = (void *)(drhd + 1); |
| end = ((void *)drhd) + header->length; |
| |
| while (start < end) { |
| scope = start; |
| if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_IOAPIC) { |
| if (ir_ioapic_num == MAX_IO_APICS) { |
| printk(KERN_WARNING "Exceeded Max IO APICS\n"); |
| return -1; |
| } |
| |
| printk(KERN_INFO "IOAPIC id %d under DRHD base " |
| " 0x%Lx IOMMU %d\n", scope->enumeration_id, |
| drhd->address, iommu->seq_id); |
| |
| ir_parse_one_ioapic_scope(scope, iommu); |
| } else if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_HPET) { |
| if (ir_hpet_num == MAX_HPET_TBS) { |
| printk(KERN_WARNING "Exceeded Max HPET blocks\n"); |
| return -1; |
| } |
| |
| printk(KERN_INFO "HPET id %d under DRHD base" |
| " 0x%Lx\n", scope->enumeration_id, |
| drhd->address); |
| |
| ir_parse_one_hpet_scope(scope, iommu); |
| } |
| start += scope->length; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Finds the assocaition between IOAPIC's and its Interrupt-remapping |
| * hardware unit. |
| */ |
| int __init parse_ioapics_under_ir(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| int ir_supported = 0; |
| int ioapic_idx; |
| |
| for_each_drhd_unit(drhd) { |
| struct intel_iommu *iommu = drhd->iommu; |
| |
| if (ecap_ir_support(iommu->ecap)) { |
| if (ir_parse_ioapic_hpet_scope(drhd->hdr, iommu)) |
| return -1; |
| |
| ir_supported = 1; |
| } |
| } |
| |
| if (!ir_supported) |
| return 0; |
| |
| for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) { |
| int ioapic_id = mpc_ioapic_id(ioapic_idx); |
| if (!map_ioapic_to_ir(ioapic_id)) { |
| pr_err(FW_BUG "ioapic %d has no mapping iommu, " |
| "interrupt remapping will be disabled\n", |
| ioapic_id); |
| return -1; |
| } |
| } |
| |
| return 1; |
| } |
| |
| int __init ir_dev_scope_init(void) |
| { |
| if (!irq_remapping_enabled) |
| return 0; |
| |
| return dmar_dev_scope_init(); |
| } |
| rootfs_initcall(ir_dev_scope_init); |
| |
| static void disable_irq_remapping(void) |
| { |
| struct dmar_drhd_unit *drhd; |
| struct intel_iommu *iommu = NULL; |
| |
| /* |
| * Disable Interrupt-remapping for all the DRHD's now. |
| */ |
| for_each_iommu(iommu, drhd) { |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| iommu_disable_irq_remapping(iommu); |
| } |
| } |
| |
| static int reenable_irq_remapping(int eim) |
| { |
| struct dmar_drhd_unit *drhd; |
| int setup = 0; |
| struct intel_iommu *iommu = NULL; |
| |
| for_each_iommu(iommu, drhd) |
| if (iommu->qi) |
| dmar_reenable_qi(iommu); |
| |
| /* |
| * Setup Interrupt-remapping for all the DRHD's now. |
| */ |
| for_each_iommu(iommu, drhd) { |
| if (!ecap_ir_support(iommu->ecap)) |
| continue; |
| |
| /* Set up interrupt remapping for iommu.*/ |
| iommu_set_irq_remapping(iommu, eim); |
| setup = 1; |
| } |
| |
| if (!setup) |
| goto error; |
| |
| return 0; |
| |
| error: |
| /* |
| * handle error condition gracefully here! |
| */ |
| return -1; |
| } |
| |
| static void prepare_irte(struct irte *irte, int vector, |
| unsigned int dest) |
| { |
| memset(irte, 0, sizeof(*irte)); |
| |
| irte->present = 1; |
| irte->dst_mode = apic->irq_dest_mode; |
| /* |
| * Trigger mode in the IRTE will always be edge, and for IO-APIC, the |
| * actual level or edge trigger will be setup in the IO-APIC |
| * RTE. This will help simplify level triggered irq migration. |
| * For more details, see the comments (in io_apic.c) explainig IO-APIC |
| * irq migration in the presence of interrupt-remapping. |
| */ |
| irte->trigger_mode = 0; |
| irte->dlvry_mode = apic->irq_delivery_mode; |
| irte->vector = vector; |
| irte->dest_id = IRTE_DEST(dest); |
| irte->redir_hint = 1; |
| } |
| |
| static int intel_setup_ioapic_entry(int irq, |
| struct IO_APIC_route_entry *route_entry, |
| unsigned int destination, int vector, |
| struct io_apic_irq_attr *attr) |
| { |
| int ioapic_id = mpc_ioapic_id(attr->ioapic); |
| struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id); |
| struct IR_IO_APIC_route_entry *entry; |
| struct irte irte; |
| int index; |
| |
| if (!iommu) { |
| pr_warn("No mapping iommu for ioapic %d\n", ioapic_id); |
| return -ENODEV; |
| } |
| |
| entry = (struct IR_IO_APIC_route_entry *)route_entry; |
| |
| index = alloc_irte(iommu, irq, 1); |
| if (index < 0) { |
| pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id); |
| return -ENOMEM; |
| } |
| |
| prepare_irte(&irte, vector, destination); |
| |
| /* Set source-id of interrupt request */ |
| set_ioapic_sid(&irte, ioapic_id); |
| |
| modify_irte(irq, &irte); |
| |
| apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: " |
| "Set IRTE entry (P:%d FPD:%d Dst_Mode:%d " |
| "Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X " |
| "Avail:%X Vector:%02X Dest:%08X " |
| "SID:%04X SQ:%X SVT:%X)\n", |
| attr->ioapic, irte.present, irte.fpd, irte.dst_mode, |
| irte.redir_hint, irte.trigger_mode, irte.dlvry_mode, |
| irte.avail, irte.vector, irte.dest_id, |
| irte.sid, irte.sq, irte.svt); |
| |
| memset(entry, 0, sizeof(*entry)); |
| |
| entry->index2 = (index >> 15) & 0x1; |
| entry->zero = 0; |
| entry->format = 1; |
| entry->index = (index & 0x7fff); |
| /* |
| * IO-APIC RTE will be configured with virtual vector. |
| * irq handler will do the explicit EOI to the io-apic. |
| */ |
| entry->vector = attr->ioapic_pin; |
| entry->mask = 0; /* enable IRQ */ |
| entry->trigger = attr->trigger; |
| entry->polarity = attr->polarity; |
| |
| /* Mask level triggered irqs. |
| * Use IRQ_DELAYED_DISABLE for edge triggered irqs. |
| */ |
| if (attr->trigger) |
| entry->mask = 1; |
| |
| return 0; |
| } |
| |
| /* |
| * Migrate the IO-APIC irq in the presence of intr-remapping. |
| * |
| * For both level and edge triggered, irq migration is a simple atomic |
| * update(of vector and cpu destination) of IRTE and flush the hardware cache. |
| * |
| * For level triggered, we eliminate the io-apic RTE modification (with the |
| * updated vector information), by using a virtual vector (io-apic pin number). |
| * Real vector that is used for interrupting cpu will be coming from |
| * the interrupt-remapping table entry. |
| * |
| * As the migration is a simple atomic update of IRTE, the same mechanism |
| * is used to migrate MSI irq's in the presence of interrupt-remapping. |
| */ |
| static int |
| intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, |
| bool force) |
| { |
| struct irq_cfg *cfg = data->chip_data; |
| unsigned int dest, irq = data->irq; |
| struct irte irte; |
| int err; |
| |
| if (!config_enabled(CONFIG_SMP)) |
| return -EINVAL; |
| |
| if (!cpumask_intersects(mask, cpu_online_mask)) |
| return -EINVAL; |
| |
| if (get_irte(irq, &irte)) |
| return -EBUSY; |
| |
| err = assign_irq_vector(irq, cfg, mask); |
| if (err) |
| return err; |
| |
| err = apic->cpu_mask_to_apicid_and(cfg->domain, mask, &dest); |
| if (err) { |
| if (assign_irq_vector(irq, cfg, data->affinity)) |
| pr_err("Failed to recover vector for irq %d\n", irq); |
| return err; |
| } |
| |
| irte.vector = cfg->vector; |
| irte.dest_id = IRTE_DEST(dest); |
| |
| /* |
| * Atomically updates the IRTE with the new destination, vector |
| * and flushes the interrupt entry cache. |
| */ |
| modify_irte(irq, &irte); |
| |
| /* |
| * After this point, all the interrupts will start arriving |
| * at the new destination. So, time to cleanup the previous |
| * vector allocation. |
| */ |
| if (cfg->move_in_progress) |
| send_cleanup_vector(cfg); |
| |
| cpumask_copy(data->affinity, mask); |
| return 0; |
| } |
| |
| static void intel_compose_msi_msg(struct pci_dev *pdev, |
| unsigned int irq, unsigned int dest, |
| struct msi_msg *msg, u8 hpet_id) |
| { |
| struct irq_cfg *cfg; |
| struct irte irte; |
| u16 sub_handle = 0; |
| int ir_index; |
| |
| cfg = irq_get_chip_data(irq); |
| |
| ir_index = map_irq_to_irte_handle(irq, &sub_handle); |
| BUG_ON(ir_index == -1); |
| |
| prepare_irte(&irte, cfg->vector, dest); |
| |
| /* Set source-id of interrupt request */ |
| if (pdev) |
| set_msi_sid(&irte, pdev); |
| else |
| set_hpet_sid(&irte, hpet_id); |
| |
| modify_irte(irq, &irte); |
| |
| msg->address_hi = MSI_ADDR_BASE_HI; |
| msg->data = sub_handle; |
| msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | |
| MSI_ADDR_IR_SHV | |
| MSI_ADDR_IR_INDEX1(ir_index) | |
| MSI_ADDR_IR_INDEX2(ir_index); |
| } |
| |
| /* |
| * Map the PCI dev to the corresponding remapping hardware unit |
| * and allocate 'nvec' consecutive interrupt-remapping table entries |
| * in it. |
| */ |
| static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec) |
| { |
| struct intel_iommu *iommu; |
| int index; |
| |
| iommu = map_dev_to_ir(dev); |
| if (!iommu) { |
| printk(KERN_ERR |
| "Unable to map PCI %s to iommu\n", pci_name(dev)); |
| return -ENOENT; |
| } |
| |
| index = alloc_irte(iommu, irq, nvec); |
| if (index < 0) { |
| printk(KERN_ERR |
| "Unable to allocate %d IRTE for PCI %s\n", nvec, |
| pci_name(dev)); |
| return -ENOSPC; |
| } |
| return index; |
| } |
| |
| static int intel_msi_setup_irq(struct pci_dev *pdev, unsigned int irq, |
| int index, int sub_handle) |
| { |
| struct intel_iommu *iommu; |
| |
| iommu = map_dev_to_ir(pdev); |
| if (!iommu) |
| return -ENOENT; |
| /* |
| * setup the mapping between the irq and the IRTE |
| * base index, the sub_handle pointing to the |
| * appropriate interrupt remap table entry. |
| */ |
| set_irte_irq(irq, iommu, index, sub_handle); |
| |
| return 0; |
| } |
| |
| static int intel_setup_hpet_msi(unsigned int irq, unsigned int id) |
| { |
| struct intel_iommu *iommu = map_hpet_to_ir(id); |
| int index; |
| |
| if (!iommu) |
| return -1; |
| |
| index = alloc_irte(iommu, irq, 1); |
| if (index < 0) |
| return -1; |
| |
| return 0; |
| } |
| |
| struct irq_remap_ops intel_irq_remap_ops = { |
| .supported = intel_irq_remapping_supported, |
| .prepare = dmar_table_init, |
| .enable = intel_enable_irq_remapping, |
| .disable = disable_irq_remapping, |
| .reenable = reenable_irq_remapping, |
| .enable_faulting = enable_drhd_fault_handling, |
| .setup_ioapic_entry = intel_setup_ioapic_entry, |
| .set_affinity = intel_ioapic_set_affinity, |
| .free_irq = free_irte, |
| .compose_msi_msg = intel_compose_msi_msg, |
| .msi_alloc_irq = intel_msi_alloc_irq, |
| .msi_setup_irq = intel_msi_setup_irq, |
| .setup_hpet_msi = intel_setup_hpet_msi, |
| }; |