| /* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #define pr_fmt(fmt) "ACC: %s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/string.h> |
| #include <soc/qcom/scm.h> |
| |
| #define MEM_ACC_DEFAULT_SEL_SIZE 2 |
| |
| #define BYTES_PER_FUSE_ROW 8 |
| |
| /* mem-acc config flags */ |
| |
| enum { |
| MEM_ACC_USE_CORNER_ACC_MAP = BIT(0), |
| MEM_ACC_USE_ADDR_VAL_MAP = BIT(1), |
| }; |
| |
| #define FUSE_MAP_NO_MATCH (-1) |
| #define FUSE_PARAM_MATCH_ANY (-1) |
| #define PARAM_MATCH_ANY (-1) |
| |
| enum { |
| MEMORY_L1, |
| MEMORY_L2, |
| MEMORY_MAX, |
| }; |
| |
| #define MEM_ACC_TYPE_MAX 6 |
| |
| /** |
| * struct acc_reg_value - Acc register configuration structure |
| * @addr_index: An index in to phys_reg_addr_list and remap_reg_addr_list |
| * to get the ACC register physical address and remapped address. |
| * @reg_val: Value to program in to the register mapped by addr_index. |
| */ |
| struct acc_reg_value { |
| u32 addr_index; |
| u32 reg_val; |
| }; |
| |
| struct corner_acc_reg_config { |
| struct acc_reg_value *reg_config_list; |
| int max_reg_config_len; |
| }; |
| |
| struct mem_acc_regulator { |
| struct device *dev; |
| struct regulator_desc rdesc; |
| struct regulator_dev *rdev; |
| |
| int corner; |
| bool mem_acc_supported[MEMORY_MAX]; |
| bool mem_acc_custom_supported[MEMORY_MAX]; |
| |
| u32 *acc_sel_mask[MEMORY_MAX]; |
| u32 *acc_sel_bit_pos[MEMORY_MAX]; |
| u32 acc_sel_bit_size[MEMORY_MAX]; |
| u32 num_acc_sel[MEMORY_MAX]; |
| u32 *acc_en_bit_pos; |
| u32 num_acc_en; |
| u32 *corner_acc_map; |
| u32 num_corners; |
| u32 override_fuse_value; |
| int override_map_match; |
| int override_map_count; |
| |
| |
| void __iomem *acc_sel_base[MEMORY_MAX]; |
| void __iomem *acc_en_base; |
| phys_addr_t acc_sel_addr[MEMORY_MAX]; |
| phys_addr_t acc_en_addr; |
| u32 flags; |
| |
| void __iomem *acc_custom_addr[MEMORY_MAX]; |
| u32 *acc_custom_data[MEMORY_MAX]; |
| |
| phys_addr_t mem_acc_type_addr[MEM_ACC_TYPE_MAX]; |
| u32 *mem_acc_type_data; |
| |
| /* eFuse parameters */ |
| phys_addr_t efuse_addr; |
| void __iomem *efuse_base; |
| |
| u32 num_acc_reg; |
| u32 *phys_reg_addr_list; |
| void __iomem **remap_reg_addr_list; |
| struct corner_acc_reg_config *corner_acc_reg_config; |
| u32 *override_acc_range_fuse_list; |
| int override_acc_range_fuse_num; |
| }; |
| |
| static DEFINE_MUTEX(mem_acc_memory_mutex); |
| |
| static u64 mem_acc_read_efuse_row(struct mem_acc_regulator *mem_acc_vreg, |
| u32 row_num, bool use_tz_api) |
| { |
| int rc; |
| u64 efuse_bits; |
| struct scm_desc desc = {0}; |
| struct mem_acc_read_req { |
| u32 row_address; |
| int addr_type; |
| } req; |
| |
| struct mem_acc_read_rsp { |
| u32 row_data[2]; |
| u32 status; |
| } rsp; |
| |
| if (!use_tz_api) { |
| efuse_bits = readq_relaxed(mem_acc_vreg->efuse_base |
| + row_num * BYTES_PER_FUSE_ROW); |
| return efuse_bits; |
| } |
| |
| desc.args[0] = req.row_address = mem_acc_vreg->efuse_addr + |
| row_num * BYTES_PER_FUSE_ROW; |
| desc.args[1] = req.addr_type = 0; |
| desc.arginfo = SCM_ARGS(2); |
| efuse_bits = 0; |
| |
| if (!is_scm_armv8()) { |
| rc = scm_call(SCM_SVC_FUSE, SCM_FUSE_READ, |
| &req, sizeof(req), &rsp, sizeof(rsp)); |
| } else { |
| rc = scm_call2(SCM_SIP_FNID(SCM_SVC_FUSE, SCM_FUSE_READ), |
| &desc); |
| rsp.row_data[0] = desc.ret[0]; |
| rsp.row_data[1] = desc.ret[1]; |
| rsp.status = desc.ret[2]; |
| } |
| |
| if (rc) { |
| pr_err("read row %d failed, err code = %d", row_num, rc); |
| } else { |
| efuse_bits = ((u64)(rsp.row_data[1]) << 32) + |
| (u64)rsp.row_data[0]; |
| } |
| |
| return efuse_bits; |
| } |
| |
| static inline u32 apc_to_acc_corner(struct mem_acc_regulator *mem_acc_vreg, |
| int corner) |
| { |
| /* |
| * corner_acc_map maps the corner from index 0 and APC corner value |
| * starts from the value 1 |
| */ |
| return mem_acc_vreg->corner_acc_map[corner - 1]; |
| } |
| |
| static void __update_acc_sel(struct mem_acc_regulator *mem_acc_vreg, |
| int corner, int mem_type) |
| { |
| u32 acc_data, acc_data_old, i, bit, acc_corner; |
| |
| acc_data = readl_relaxed(mem_acc_vreg->acc_sel_base[mem_type]); |
| acc_data_old = acc_data; |
| for (i = 0; i < mem_acc_vreg->num_acc_sel[mem_type]; i++) { |
| bit = mem_acc_vreg->acc_sel_bit_pos[mem_type][i]; |
| acc_data &= ~mem_acc_vreg->acc_sel_mask[mem_type][i]; |
| acc_corner = apc_to_acc_corner(mem_acc_vreg, corner); |
| acc_data |= (acc_corner << bit) & |
| mem_acc_vreg->acc_sel_mask[mem_type][i]; |
| } |
| pr_debug("corner=%d old_acc_sel=0x%02x new_acc_sel=0x%02x mem_type=%d\n", |
| corner, acc_data_old, acc_data, mem_type); |
| writel_relaxed(acc_data, mem_acc_vreg->acc_sel_base[mem_type]); |
| } |
| |
| static void __update_acc_type(struct mem_acc_regulator *mem_acc_vreg, |
| int corner) |
| { |
| int i, rc; |
| |
| for (i = 0; i < MEM_ACC_TYPE_MAX; i++) { |
| if (mem_acc_vreg->mem_acc_type_addr[i]) { |
| rc = scm_io_write(mem_acc_vreg->mem_acc_type_addr[i], |
| mem_acc_vreg->mem_acc_type_data[corner - 1 + i * |
| mem_acc_vreg->num_corners]); |
| if (rc) |
| pr_err("scm_io_write: %pa failure rc:%d\n", |
| &(mem_acc_vreg->mem_acc_type_addr[i]), |
| rc); |
| } |
| } |
| } |
| |
| static void __update_acc_custom(struct mem_acc_regulator *mem_acc_vreg, |
| int corner, int mem_type) |
| { |
| writel_relaxed( |
| mem_acc_vreg->acc_custom_data[mem_type][corner-1], |
| mem_acc_vreg->acc_custom_addr[mem_type]); |
| pr_debug("corner=%d mem_type=%d custom_data=0x%2x\n", corner, |
| mem_type, mem_acc_vreg->acc_custom_data[mem_type][corner-1]); |
| } |
| |
| static void update_acc_sel(struct mem_acc_regulator *mem_acc_vreg, int corner) |
| { |
| int i; |
| |
| for (i = 0; i < MEMORY_MAX; i++) { |
| if (mem_acc_vreg->mem_acc_supported[i]) |
| __update_acc_sel(mem_acc_vreg, corner, i); |
| if (mem_acc_vreg->mem_acc_custom_supported[i]) |
| __update_acc_custom(mem_acc_vreg, corner, i); |
| } |
| |
| if (mem_acc_vreg->mem_acc_type_data) |
| __update_acc_type(mem_acc_vreg, corner); |
| } |
| |
| static void update_acc_reg(struct mem_acc_regulator *mem_acc_vreg, int corner) |
| { |
| struct corner_acc_reg_config *corner_acc_reg_config; |
| struct acc_reg_value *reg_config_list; |
| int i, index; |
| u32 addr_index, reg_val; |
| |
| corner_acc_reg_config = |
| &mem_acc_vreg->corner_acc_reg_config[mem_acc_vreg->corner]; |
| reg_config_list = corner_acc_reg_config->reg_config_list; |
| for (i = 0; i < corner_acc_reg_config->max_reg_config_len; i++) { |
| /* |
| * Use (corner - 1) in the below equation as |
| * the reg_config_list[] stores the values starting from |
| * index '0' where as the minimum corner value allowed |
| * in regulator framework is '1'. |
| */ |
| index = (corner - 1) * corner_acc_reg_config->max_reg_config_len |
| + i; |
| addr_index = reg_config_list[index].addr_index; |
| reg_val = reg_config_list[index].reg_val; |
| |
| if (addr_index == PARAM_MATCH_ANY) |
| break; |
| |
| writel_relaxed(reg_val, |
| mem_acc_vreg->remap_reg_addr_list[addr_index]); |
| /* make sure write complete */ |
| mb(); |
| |
| pr_debug("corner=%d register:0x%x value:0x%x\n", corner, |
| mem_acc_vreg->phys_reg_addr_list[addr_index], reg_val); |
| } |
| } |
| |
| static int mem_acc_regulator_set_voltage(struct regulator_dev *rdev, |
| int corner, int corner_max, unsigned int *selector) |
| { |
| struct mem_acc_regulator *mem_acc_vreg = rdev_get_drvdata(rdev); |
| int i; |
| |
| if (corner > mem_acc_vreg->num_corners) { |
| pr_err("Invalid corner=%d requested\n", corner); |
| return -EINVAL; |
| } |
| |
| pr_debug("old corner=%d, new corner=%d\n", |
| mem_acc_vreg->corner, corner); |
| |
| if (corner == mem_acc_vreg->corner) |
| return 0; |
| |
| /* go up or down one level at a time */ |
| mutex_lock(&mem_acc_memory_mutex); |
| |
| if (mem_acc_vreg->flags & MEM_ACC_USE_ADDR_VAL_MAP) { |
| update_acc_reg(mem_acc_vreg, corner); |
| } else if (mem_acc_vreg->flags & MEM_ACC_USE_CORNER_ACC_MAP) { |
| if (corner > mem_acc_vreg->corner) { |
| for (i = mem_acc_vreg->corner + 1; i <= corner; i++) { |
| pr_debug("UP: to corner %d\n", i); |
| update_acc_sel(mem_acc_vreg, i); |
| } |
| } else { |
| for (i = mem_acc_vreg->corner - 1; i >= corner; i--) { |
| pr_debug("DOWN: to corner %d\n", i); |
| update_acc_sel(mem_acc_vreg, i); |
| } |
| } |
| } |
| |
| mutex_unlock(&mem_acc_memory_mutex); |
| |
| pr_debug("new voltage corner set %d\n", corner); |
| |
| mem_acc_vreg->corner = corner; |
| |
| return 0; |
| } |
| |
| static int mem_acc_regulator_get_voltage(struct regulator_dev *rdev) |
| { |
| struct mem_acc_regulator *mem_acc_vreg = rdev_get_drvdata(rdev); |
| |
| return mem_acc_vreg->corner; |
| } |
| |
| static struct regulator_ops mem_acc_corner_ops = { |
| .set_voltage = mem_acc_regulator_set_voltage, |
| .get_voltage = mem_acc_regulator_get_voltage, |
| }; |
| |
| static int __mem_acc_sel_init(struct mem_acc_regulator *mem_acc_vreg, |
| int mem_type) |
| { |
| int i; |
| u32 bit, mask; |
| |
| mem_acc_vreg->acc_sel_mask[mem_type] = devm_kzalloc(mem_acc_vreg->dev, |
| mem_acc_vreg->num_acc_sel[mem_type] * sizeof(u32), GFP_KERNEL); |
| if (!mem_acc_vreg->acc_sel_mask[mem_type]) |
| return -ENOMEM; |
| |
| for (i = 0; i < mem_acc_vreg->num_acc_sel[mem_type]; i++) { |
| bit = mem_acc_vreg->acc_sel_bit_pos[mem_type][i]; |
| mask = BIT(mem_acc_vreg->acc_sel_bit_size[mem_type]) - 1; |
| mem_acc_vreg->acc_sel_mask[mem_type][i] = mask << bit; |
| } |
| |
| return 0; |
| } |
| |
| static int mem_acc_sel_init(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| int i, rc; |
| |
| for (i = 0; i < MEMORY_MAX; i++) { |
| if (mem_acc_vreg->mem_acc_supported[i]) { |
| rc = __mem_acc_sel_init(mem_acc_vreg, i); |
| if (rc) { |
| pr_err("Unable to initialize mem_type=%d rc=%d\n", |
| i, rc); |
| return rc; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void mem_acc_en_init(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| int i, bit; |
| u32 acc_data; |
| |
| acc_data = readl_relaxed(mem_acc_vreg->acc_en_base); |
| pr_debug("init: acc_en_register=%x\n", acc_data); |
| for (i = 0; i < mem_acc_vreg->num_acc_en; i++) { |
| bit = mem_acc_vreg->acc_en_bit_pos[i]; |
| acc_data |= BIT(bit); |
| } |
| pr_debug("final: acc_en_register=%x\n", acc_data); |
| writel_relaxed(acc_data, mem_acc_vreg->acc_en_base); |
| } |
| |
| static int populate_acc_data(struct mem_acc_regulator *mem_acc_vreg, |
| const char *prop_name, u32 **value, u32 *len) |
| { |
| int rc; |
| |
| if (!of_get_property(mem_acc_vreg->dev->of_node, prop_name, len)) { |
| pr_err("Unable to find %s property\n", prop_name); |
| return -EINVAL; |
| } |
| *len /= sizeof(u32); |
| if (!(*len)) { |
| pr_err("Incorrect entries in %s\n", prop_name); |
| return -EINVAL; |
| } |
| |
| *value = devm_kzalloc(mem_acc_vreg->dev, (*len) * sizeof(u32), |
| GFP_KERNEL); |
| if (!(*value)) { |
| pr_err("Unable to allocate memory for %s\n", prop_name); |
| return -ENOMEM; |
| } |
| |
| pr_debug("Found %s, data-length = %d\n", prop_name, *len); |
| |
| rc = of_property_read_u32_array(mem_acc_vreg->dev->of_node, |
| prop_name, *value, *len); |
| if (rc) { |
| pr_err("Unable to populate %s rc=%d\n", prop_name, rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int mem_acc_sel_setup(struct mem_acc_regulator *mem_acc_vreg, |
| struct resource *res, int mem_type) |
| { |
| int len, rc; |
| char *mem_select_str; |
| char *mem_select_size_str; |
| |
| mem_acc_vreg->acc_sel_addr[mem_type] = res->start; |
| len = res->end - res->start + 1; |
| pr_debug("'acc_sel_addr' = %pa mem_type=%d (len=%d)\n", |
| &res->start, mem_type, len); |
| |
| mem_acc_vreg->acc_sel_base[mem_type] = devm_ioremap(mem_acc_vreg->dev, |
| mem_acc_vreg->acc_sel_addr[mem_type], len); |
| if (!mem_acc_vreg->acc_sel_base[mem_type]) { |
| pr_err("Unable to map 'acc_sel_addr' %pa for mem_type=%d\n", |
| &mem_acc_vreg->acc_sel_addr[mem_type], mem_type); |
| return -EINVAL; |
| } |
| |
| switch (mem_type) { |
| case MEMORY_L1: |
| mem_select_str = "qcom,acc-sel-l1-bit-pos"; |
| mem_select_size_str = "qcom,acc-sel-l1-bit-size"; |
| break; |
| case MEMORY_L2: |
| mem_select_str = "qcom,acc-sel-l2-bit-pos"; |
| mem_select_size_str = "qcom,acc-sel-l2-bit-size"; |
| break; |
| default: |
| pr_err("Invalid memory type: %d\n", mem_type); |
| return -EINVAL; |
| } |
| |
| mem_acc_vreg->acc_sel_bit_size[mem_type] = MEM_ACC_DEFAULT_SEL_SIZE; |
| of_property_read_u32(mem_acc_vreg->dev->of_node, mem_select_size_str, |
| &mem_acc_vreg->acc_sel_bit_size[mem_type]); |
| |
| rc = populate_acc_data(mem_acc_vreg, mem_select_str, |
| &mem_acc_vreg->acc_sel_bit_pos[mem_type], |
| &mem_acc_vreg->num_acc_sel[mem_type]); |
| if (rc) |
| pr_err("Unable to populate '%s' rc=%d\n", mem_select_str, rc); |
| |
| return rc; |
| } |
| |
| static int mem_acc_efuse_init(struct platform_device *pdev, |
| struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct resource *res; |
| int len; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "efuse_addr"); |
| if (!res || !res->start) { |
| mem_acc_vreg->efuse_base = NULL; |
| pr_debug("'efuse_addr' resource missing or not used.\n"); |
| return 0; |
| } |
| |
| mem_acc_vreg->efuse_addr = res->start; |
| len = res->end - res->start + 1; |
| |
| pr_info("efuse_addr = %pa (len=0x%x)\n", &res->start, len); |
| |
| mem_acc_vreg->efuse_base = devm_ioremap(&pdev->dev, |
| mem_acc_vreg->efuse_addr, len); |
| if (!mem_acc_vreg->efuse_base) { |
| pr_err("Unable to map efuse_addr %pa\n", |
| &mem_acc_vreg->efuse_addr); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mem_acc_custom_data_init(struct platform_device *pdev, |
| struct mem_acc_regulator *mem_acc_vreg, |
| int mem_type) |
| { |
| struct resource *res; |
| char *custom_apc_addr_str, *custom_apc_data_str; |
| int len, rc = 0; |
| |
| switch (mem_type) { |
| case MEMORY_L1: |
| custom_apc_addr_str = "acc-l1-custom"; |
| custom_apc_data_str = "qcom,l1-acc-custom-data"; |
| break; |
| case MEMORY_L2: |
| custom_apc_addr_str = "acc-l2-custom"; |
| custom_apc_data_str = "qcom,l2-acc-custom-data"; |
| break; |
| default: |
| pr_err("Invalid memory type: %d\n", mem_type); |
| return -EINVAL; |
| } |
| |
| if (!of_find_property(mem_acc_vreg->dev->of_node, |
| custom_apc_data_str, NULL)) { |
| pr_debug("%s custom_data not specified\n", custom_apc_data_str); |
| return 0; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| custom_apc_addr_str); |
| if (!res || !res->start) { |
| pr_debug("%s resource missing\n", custom_apc_addr_str); |
| return -EINVAL; |
| } |
| |
| len = res->end - res->start + 1; |
| mem_acc_vreg->acc_custom_addr[mem_type] = |
| devm_ioremap(mem_acc_vreg->dev, res->start, len); |
| if (!mem_acc_vreg->acc_custom_addr[mem_type]) { |
| pr_err("Unable to map %s %pa\n", |
| custom_apc_addr_str, &res->start); |
| return -EINVAL; |
| } |
| |
| rc = populate_acc_data(mem_acc_vreg, custom_apc_data_str, |
| &mem_acc_vreg->acc_custom_data[mem_type], &len); |
| if (rc) { |
| pr_err("Unable to find %s rc=%d\n", custom_apc_data_str, rc); |
| return rc; |
| } |
| |
| if (mem_acc_vreg->num_corners != len) { |
| pr_err("Custom data is not present for all the corners\n"); |
| return -EINVAL; |
| } |
| |
| mem_acc_vreg->mem_acc_custom_supported[mem_type] = true; |
| |
| return 0; |
| } |
| |
| static int override_mem_acc_custom_data(struct mem_acc_regulator *mem_acc_vreg, |
| int mem_type) |
| { |
| char *custom_apc_data_str; |
| int len, rc = 0, i; |
| int tuple_count, tuple_match; |
| u32 index = 0, value = 0; |
| |
| switch (mem_type) { |
| case MEMORY_L1: |
| custom_apc_data_str = "qcom,override-l1-acc-custom-data"; |
| break; |
| case MEMORY_L2: |
| custom_apc_data_str = "qcom,override-l2-acc-custom-data"; |
| break; |
| default: |
| pr_err("Invalid memory type: %d\n", mem_type); |
| return -EINVAL; |
| } |
| |
| if (!of_find_property(mem_acc_vreg->dev->of_node, |
| custom_apc_data_str, &len)) { |
| pr_debug("%s not specified\n", custom_apc_data_str); |
| return 0; |
| } |
| |
| if (mem_acc_vreg->override_map_count) { |
| if (mem_acc_vreg->override_map_match == FUSE_MAP_NO_MATCH) |
| return 0; |
| tuple_count = mem_acc_vreg->override_map_count; |
| tuple_match = mem_acc_vreg->override_map_match; |
| } else { |
| tuple_count = 1; |
| tuple_match = 0; |
| } |
| |
| if (len != mem_acc_vreg->num_corners * tuple_count * sizeof(u32)) { |
| pr_err("%s length=%d is invalid\n", custom_apc_data_str, len); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < mem_acc_vreg->num_corners; i++) { |
| index = (tuple_match * mem_acc_vreg->num_corners) + i; |
| rc = of_property_read_u32_index(mem_acc_vreg->dev->of_node, |
| custom_apc_data_str, index, &value); |
| if (rc) { |
| pr_err("Unable read %s index %u, rc=%d\n", |
| custom_apc_data_str, index, rc); |
| return rc; |
| } |
| mem_acc_vreg->acc_custom_data[mem_type][i] = value; |
| } |
| |
| return 0; |
| } |
| |
| static int mem_acc_override_corner_map(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| int len = 0, i, rc; |
| int tuple_count, tuple_match; |
| u32 index = 0, value = 0; |
| char *prop_str = "qcom,override-corner-acc-map"; |
| |
| if (!of_find_property(mem_acc_vreg->dev->of_node, prop_str, &len)) |
| return 0; |
| |
| if (mem_acc_vreg->override_map_count) { |
| if (mem_acc_vreg->override_map_match == FUSE_MAP_NO_MATCH) |
| return 0; |
| tuple_count = mem_acc_vreg->override_map_count; |
| tuple_match = mem_acc_vreg->override_map_match; |
| } else { |
| tuple_count = 1; |
| tuple_match = 0; |
| } |
| |
| if (len != mem_acc_vreg->num_corners * tuple_count * sizeof(u32)) { |
| pr_err("%s length=%d is invalid\n", prop_str, len); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < mem_acc_vreg->num_corners; i++) { |
| index = (tuple_match * mem_acc_vreg->num_corners) + i; |
| rc = of_property_read_u32_index(mem_acc_vreg->dev->of_node, |
| prop_str, index, &value); |
| if (rc) { |
| pr_err("Unable read %s index %u, rc=%d\n", |
| prop_str, index, rc); |
| return rc; |
| } |
| mem_acc_vreg->corner_acc_map[i] = value; |
| } |
| |
| return 0; |
| |
| } |
| |
| static void mem_acc_read_efuse_param(struct mem_acc_regulator *mem_acc_vreg, |
| u32 *fuse_sel, int *val) |
| { |
| u64 fuse_bits; |
| |
| fuse_bits = mem_acc_read_efuse_row(mem_acc_vreg, fuse_sel[0], |
| fuse_sel[3]); |
| /* |
| * fuse_sel[1] = LSB position in row (shift) |
| * fuse_sel[2] = num of bits (mask) |
| */ |
| *val = (fuse_bits >> fuse_sel[1]) & ((1 << fuse_sel[2]) - 1); |
| } |
| |
| #define FUSE_TUPLE_SIZE 4 |
| static int mem_acc_parse_override_fuse_version_map( |
| struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| int i, rc, tuple_size; |
| int len = 0; |
| u32 *tmp; |
| u32 fuse_sel[4]; |
| char *prop_str; |
| |
| prop_str = "qcom,override-acc-fuse-sel"; |
| rc = of_property_read_u32_array(of_node, prop_str, fuse_sel, |
| FUSE_TUPLE_SIZE); |
| if (rc < 0) { |
| pr_err("Read failed - %s rc=%d\n", prop_str, rc); |
| return rc; |
| } |
| |
| mem_acc_read_efuse_param(mem_acc_vreg, fuse_sel, |
| &mem_acc_vreg->override_fuse_value); |
| |
| prop_str = "qcom,override-fuse-version-map"; |
| if (!of_find_property(of_node, prop_str, &len)) |
| return -EINVAL; |
| |
| tuple_size = 1; |
| mem_acc_vreg->override_map_count = len / (sizeof(u32) * tuple_size); |
| if (len == 0 || len % (sizeof(u32) * tuple_size)) { |
| pr_err("%s length=%d is invalid\n", prop_str, len); |
| return -EINVAL; |
| } |
| |
| tmp = kzalloc(len, GFP_KERNEL); |
| if (!tmp) |
| return -ENOMEM; |
| |
| rc = of_property_read_u32_array(of_node, prop_str, tmp, |
| mem_acc_vreg->override_map_count * tuple_size); |
| if (rc) { |
| pr_err("could not read %s rc=%d\n", prop_str, rc); |
| goto done; |
| } |
| |
| for (i = 0; i < mem_acc_vreg->override_map_count; i++) { |
| if (tmp[i * tuple_size] != mem_acc_vreg->override_fuse_value |
| && tmp[i * tuple_size] != FUSE_PARAM_MATCH_ANY) { |
| continue; |
| } else { |
| mem_acc_vreg->override_map_match = i; |
| break; |
| } |
| } |
| |
| if (mem_acc_vreg->override_map_match != FUSE_MAP_NO_MATCH) |
| pr_info("override_fuse_val=%d, %s tuple match found: %d\n", |
| mem_acc_vreg->override_fuse_value, prop_str, |
| mem_acc_vreg->override_map_match); |
| else |
| pr_err("%s tuple match not found\n", prop_str); |
| |
| done: |
| kfree(tmp); |
| return rc; |
| } |
| |
| static int mem_acc_parse_override_fuse_version_range( |
| struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| int i, j, rc, size, row_size; |
| int num_fuse_sel, len = 0; |
| u32 *tmp = NULL; |
| char *prop_str; |
| u32 *fuse_val, *fuse_sel; |
| char *buf = NULL; |
| int pos = 0, buflen; |
| |
| prop_str = "qcom,override-acc-range-fuse-list"; |
| if (!of_find_property(of_node, prop_str, &len)) { |
| pr_err("%s property is missing\n", prop_str); |
| return -EINVAL; |
| } |
| |
| size = len / sizeof(u32); |
| if (len == 0 || (size % FUSE_TUPLE_SIZE)) { |
| pr_err("%s property length (%d) is invalid\n", prop_str, len); |
| return -EINVAL; |
| } |
| |
| num_fuse_sel = size / FUSE_TUPLE_SIZE; |
| fuse_val = devm_kcalloc(mem_acc_vreg->dev, num_fuse_sel, |
| sizeof(*fuse_val), GFP_KERNEL); |
| if (!fuse_val) |
| return -ENOMEM; |
| mem_acc_vreg->override_acc_range_fuse_list = fuse_val; |
| mem_acc_vreg->override_acc_range_fuse_num = num_fuse_sel; |
| |
| fuse_sel = kzalloc(len, GFP_KERNEL); |
| if (!fuse_sel) { |
| rc = -ENOMEM; |
| goto done; |
| } |
| |
| rc = of_property_read_u32_array(of_node, prop_str, fuse_sel, |
| size); |
| if (rc) { |
| pr_err("%s read failed, rc=%d\n", prop_str, rc); |
| goto done; |
| } |
| |
| for (i = 0; i < num_fuse_sel; i++) { |
| mem_acc_read_efuse_param(mem_acc_vreg, &fuse_sel[i * 4], |
| &fuse_val[i]); |
| } |
| |
| prop_str = "qcom,override-fuse-range-map"; |
| if (!of_find_property(of_node, prop_str, &len)) |
| goto done; |
| |
| row_size = num_fuse_sel * 2; |
| mem_acc_vreg->override_map_count = len / (sizeof(u32) * row_size); |
| |
| if (len == 0 || len % (sizeof(u32) * row_size)) { |
| pr_err("%s length=%d is invalid\n", prop_str, len); |
| rc = -EINVAL; |
| goto done; |
| } |
| |
| tmp = kzalloc(len, GFP_KERNEL); |
| if (!tmp) { |
| rc = -ENOMEM; |
| goto done; |
| } |
| |
| rc = of_property_read_u32_array(of_node, prop_str, tmp, |
| mem_acc_vreg->override_map_count * row_size); |
| if (rc) { |
| pr_err("could not read %s rc=%d\n", prop_str, rc); |
| goto done; |
| } |
| |
| for (i = 0; i < mem_acc_vreg->override_map_count; i++) { |
| for (j = 0; j < num_fuse_sel; j++) { |
| if (tmp[i * row_size + j * 2] > fuse_val[j] |
| || tmp[i * row_size + j * 2 + 1] < fuse_val[j]) |
| break; |
| } |
| |
| if (j == num_fuse_sel) { |
| mem_acc_vreg->override_map_match = i; |
| break; |
| } |
| } |
| |
| /* |
| * Log register and value mapping since they are useful for |
| * baseline MEM ACC logging. |
| */ |
| buflen = num_fuse_sel * sizeof("fuse_selxxxx = XXXX "); |
| buf = kzalloc(buflen, GFP_KERNEL); |
| if (!buf) |
| goto done; |
| |
| for (j = 0; j < num_fuse_sel; j++) |
| pos += scnprintf(buf + pos, buflen - pos, "fuse_sel%d = %d ", |
| j, fuse_val[j]); |
| buf[pos] = '\0'; |
| if (mem_acc_vreg->override_map_match != FUSE_MAP_NO_MATCH) |
| pr_info("%s %s tuple match found: %d\n", buf, prop_str, |
| mem_acc_vreg->override_map_match); |
| else |
| pr_err("%s %s tuple match not found\n", buf, prop_str); |
| |
| done: |
| kfree(fuse_sel); |
| kfree(tmp); |
| kfree(buf); |
| return rc; |
| } |
| |
| #define MAX_CHARS_PER_INT 20 |
| |
| static int mem_acc_reg_addr_val_dump(struct mem_acc_regulator *mem_acc_vreg, |
| struct corner_acc_reg_config *corner_acc_reg_config, |
| u32 corner) |
| { |
| int i, k, index, pos = 0; |
| u32 addr_index; |
| size_t buflen; |
| char *buf; |
| struct acc_reg_value *reg_config_list = |
| corner_acc_reg_config->reg_config_list; |
| int max_reg_config_len = corner_acc_reg_config->max_reg_config_len; |
| int num_corners = mem_acc_vreg->num_corners; |
| |
| /* |
| * Log register and value mapping since they are useful for |
| * baseline MEM ACC logging. |
| */ |
| buflen = max_reg_config_len * (MAX_CHARS_PER_INT + 6) * sizeof(*buf); |
| buf = kzalloc(buflen, GFP_KERNEL); |
| if (buf == NULL) { |
| pr_err("Could not allocate memory for acc register and value logging\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < num_corners; i++) { |
| if (corner == i + 1) |
| continue; |
| |
| pr_debug("Corner: %d --> %d:\n", corner, i + 1); |
| pos = 0; |
| for (k = 0; k < max_reg_config_len; k++) { |
| index = i * max_reg_config_len + k; |
| addr_index = reg_config_list[index].addr_index; |
| if (addr_index == PARAM_MATCH_ANY) |
| break; |
| |
| pos += scnprintf(buf + pos, buflen - pos, |
| "<0x%x 0x%x> ", |
| mem_acc_vreg->phys_reg_addr_list[addr_index], |
| reg_config_list[index].reg_val); |
| } |
| buf[pos] = '\0'; |
| pr_debug("%s\n", buf); |
| } |
| |
| kfree(buf); |
| return 0; |
| } |
| |
| static int mem_acc_get_reg_addr_val(struct device_node *of_node, |
| const char *prop_str, struct acc_reg_value *reg_config_list, |
| int list_offset, int list_size, u32 max_reg_index) |
| { |
| |
| int i, index, rc = 0; |
| |
| for (i = 0; i < list_size / 2; i++) { |
| index = (list_offset * list_size) + i * 2; |
| rc = of_property_read_u32_index(of_node, prop_str, index, |
| ®_config_list[i].addr_index); |
| rc |= of_property_read_u32_index(of_node, prop_str, index + 1, |
| ®_config_list[i].reg_val); |
| if (rc) { |
| pr_err("could not read %s at tuple %u: rc=%d\n", |
| prop_str, index, rc); |
| return rc; |
| } |
| |
| if (reg_config_list[i].addr_index == PARAM_MATCH_ANY) |
| continue; |
| |
| if ((!reg_config_list[i].addr_index) || |
| reg_config_list[i].addr_index > max_reg_index) { |
| pr_err("Invalid register index %u in %s at tuple %u\n", |
| reg_config_list[i].addr_index, prop_str, index); |
| return -EINVAL; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int mem_acc_override_reg_addr_val_init( |
| struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| struct corner_acc_reg_config *corner_acc_reg_config; |
| struct acc_reg_value *override_reg_config_list; |
| int i, tuple_count, tuple_match, len = 0, rc = 0; |
| u32 list_size, override_max_reg_config_len; |
| char prop_str[40]; |
| struct property *prop; |
| int num_corners = mem_acc_vreg->num_corners; |
| |
| if (!mem_acc_vreg->corner_acc_reg_config) |
| return 0; |
| |
| if (mem_acc_vreg->override_map_count) { |
| if (mem_acc_vreg->override_map_match == FUSE_MAP_NO_MATCH) |
| return 0; |
| tuple_count = mem_acc_vreg->override_map_count; |
| tuple_match = mem_acc_vreg->override_map_match; |
| } else { |
| tuple_count = 1; |
| tuple_match = 0; |
| } |
| |
| corner_acc_reg_config = mem_acc_vreg->corner_acc_reg_config; |
| for (i = 1; i <= num_corners; i++) { |
| snprintf(prop_str, sizeof(prop_str), |
| "qcom,override-corner%d-addr-val-map", i); |
| prop = of_find_property(of_node, prop_str, &len); |
| list_size = len / (tuple_count * sizeof(u32)); |
| if (!prop) { |
| pr_debug("%s property not specified\n", prop_str); |
| continue; |
| } |
| |
| if ((!list_size) || list_size < (num_corners * 2)) { |
| pr_err("qcom,override-corner%d-addr-val-map property is missed or invalid length: len=%d\n", |
| i, len); |
| return -EINVAL; |
| } |
| |
| override_max_reg_config_len = list_size / (num_corners * 2); |
| override_reg_config_list = |
| corner_acc_reg_config[i].reg_config_list; |
| |
| if (corner_acc_reg_config[i].max_reg_config_len |
| != override_max_reg_config_len) { |
| /* Free already allocate memory */ |
| devm_kfree(mem_acc_vreg->dev, override_reg_config_list); |
| |
| /* Allocated memory for new requirement */ |
| override_reg_config_list = |
| devm_kcalloc(mem_acc_vreg->dev, |
| override_max_reg_config_len * num_corners, |
| sizeof(*override_reg_config_list), GFP_KERNEL); |
| if (!override_reg_config_list) |
| return -ENOMEM; |
| |
| corner_acc_reg_config[i].max_reg_config_len = |
| override_max_reg_config_len; |
| corner_acc_reg_config[i].reg_config_list = |
| override_reg_config_list; |
| } |
| |
| rc = mem_acc_get_reg_addr_val(of_node, prop_str, |
| override_reg_config_list, tuple_match, |
| list_size, mem_acc_vreg->num_acc_reg); |
| if (rc) { |
| pr_err("Failed to read %s property: rc=%d\n", |
| prop_str, rc); |
| return rc; |
| } |
| |
| rc = mem_acc_reg_addr_val_dump(mem_acc_vreg, |
| &corner_acc_reg_config[i], i); |
| if (rc) { |
| pr_err("could not dump acc address-value dump for corner=%d: rc=%d\n", |
| i, rc); |
| return rc; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int mem_acc_parse_override_config(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| int i, rc = 0; |
| |
| /* Specify default no match case. */ |
| mem_acc_vreg->override_map_match = FUSE_MAP_NO_MATCH; |
| mem_acc_vreg->override_map_count = 0; |
| |
| if (of_find_property(of_node, "qcom,override-fuse-range-map", |
| NULL)) { |
| rc = mem_acc_parse_override_fuse_version_range(mem_acc_vreg); |
| if (rc) { |
| pr_err("parsing qcom,override-fuse-range-map property failed, rc=%d\n", |
| rc); |
| return rc; |
| } |
| } else if (of_find_property(of_node, "qcom,override-fuse-version-map", |
| NULL)) { |
| rc = mem_acc_parse_override_fuse_version_map(mem_acc_vreg); |
| if (rc) { |
| pr_err("parsing qcom,override-fuse-version-map property failed, rc=%d\n", |
| rc); |
| return rc; |
| } |
| } else { |
| /* No override fuse configuration defined in device node */ |
| return 0; |
| } |
| |
| if (mem_acc_vreg->override_map_match == FUSE_MAP_NO_MATCH) |
| return 0; |
| |
| rc = mem_acc_override_corner_map(mem_acc_vreg); |
| if (rc) { |
| pr_err("Unable to override corner map rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = mem_acc_override_reg_addr_val_init(mem_acc_vreg); |
| if (rc) { |
| pr_err("Unable to override reg_config_list init rc=%d\n", |
| rc); |
| return rc; |
| } |
| |
| for (i = 0; i < MEMORY_MAX; i++) { |
| rc = override_mem_acc_custom_data(mem_acc_vreg, i); |
| if (rc) { |
| pr_err("Unable to override custom data for mem_type=%d rc=%d\n", |
| i, rc); |
| return rc; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int mem_acc_init_reg_config(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| int i, size, len = 0, rc = 0; |
| u32 addr_index, reg_val, index; |
| char *prop_str = "qcom,acc-init-reg-config"; |
| |
| if (!of_find_property(of_node, prop_str, &len)) { |
| /* Initial acc register configuration not specified */ |
| return rc; |
| } |
| |
| size = len / sizeof(u32); |
| if ((!size) || (size % 2)) { |
| pr_err("%s specified with invalid length: %d\n", |
| prop_str, size); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < size / 2; i++) { |
| index = i * 2; |
| rc = of_property_read_u32_index(of_node, prop_str, index, |
| &addr_index); |
| rc |= of_property_read_u32_index(of_node, prop_str, index + 1, |
| ®_val); |
| if (rc) { |
| pr_err("could not read %s at tuple %u: rc=%d\n", |
| prop_str, index, rc); |
| return rc; |
| } |
| |
| if ((!addr_index) || addr_index > mem_acc_vreg->num_acc_reg) { |
| pr_err("Invalid register index %u in %s at tuple %u\n", |
| addr_index, prop_str, index); |
| return -EINVAL; |
| } |
| |
| writel_relaxed(reg_val, |
| mem_acc_vreg->remap_reg_addr_list[addr_index]); |
| /* make sure write complete */ |
| mb(); |
| |
| pr_debug("acc initial config: register:0x%x value:0x%x\n", |
| mem_acc_vreg->phys_reg_addr_list[addr_index], reg_val); |
| } |
| |
| return rc; |
| } |
| |
| static int mem_acc_get_reg_addr(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| void __iomem **remap_reg_addr_list; |
| u32 *phys_reg_addr_list; |
| int i, num_acc_reg, len = 0, rc = 0; |
| |
| if (!of_find_property(of_node, "qcom,acc-reg-addr-list", &len)) { |
| /* acc register address list not specified */ |
| return rc; |
| } |
| |
| num_acc_reg = len / sizeof(u32); |
| if (!num_acc_reg) { |
| pr_err("qcom,acc-reg-addr-list has invalid len = %d\n", len); |
| return -EINVAL; |
| } |
| |
| phys_reg_addr_list = devm_kcalloc(mem_acc_vreg->dev, num_acc_reg + 1, |
| sizeof(*phys_reg_addr_list), GFP_KERNEL); |
| if (!phys_reg_addr_list) |
| return -ENOMEM; |
| |
| remap_reg_addr_list = devm_kcalloc(mem_acc_vreg->dev, num_acc_reg + 1, |
| sizeof(*remap_reg_addr_list), GFP_KERNEL); |
| if (!remap_reg_addr_list) |
| return -ENOMEM; |
| |
| rc = of_property_read_u32_array(of_node, "qcom,acc-reg-addr-list", |
| &phys_reg_addr_list[1], num_acc_reg); |
| if (rc) { |
| pr_err("Read- qcom,acc-reg-addr-list failed: rc=%d\n", rc); |
| return rc; |
| } |
| |
| for (i = 1; i <= num_acc_reg; i++) { |
| remap_reg_addr_list[i] = devm_ioremap(mem_acc_vreg->dev, |
| phys_reg_addr_list[i], 0x4); |
| if (!remap_reg_addr_list[i]) { |
| pr_err("Unable to map register address 0x%x\n", |
| phys_reg_addr_list[i]); |
| return -EINVAL; |
| } |
| } |
| |
| mem_acc_vreg->num_acc_reg = num_acc_reg; |
| mem_acc_vreg->phys_reg_addr_list = phys_reg_addr_list; |
| mem_acc_vreg->remap_reg_addr_list = remap_reg_addr_list; |
| |
| return rc; |
| } |
| |
| static int mem_acc_reg_config_init(struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = mem_acc_vreg->dev->of_node; |
| struct acc_reg_value *reg_config_list; |
| int len, size, rc, i, num_corners; |
| struct property *prop; |
| char prop_str[30]; |
| struct corner_acc_reg_config *corner_acc_reg_config; |
| |
| rc = of_property_read_u32(of_node, "qcom,num-acc-corners", |
| &num_corners); |
| if (rc) { |
| pr_err("could not read qcom,num-acc-corners: rc=%d\n", rc); |
| return rc; |
| } |
| |
| mem_acc_vreg->num_corners = num_corners; |
| |
| rc = of_property_read_u32(of_node, "qcom,boot-acc-corner", |
| &mem_acc_vreg->corner); |
| if (rc) { |
| pr_err("could not read qcom,boot-acc-corner: rc=%d\n", rc); |
| return rc; |
| } |
| pr_debug("boot acc corner = %d\n", mem_acc_vreg->corner); |
| |
| corner_acc_reg_config = devm_kcalloc(mem_acc_vreg->dev, num_corners + 1, |
| sizeof(*corner_acc_reg_config), |
| GFP_KERNEL); |
| if (!corner_acc_reg_config) |
| return -ENOMEM; |
| |
| for (i = 1; i <= num_corners; i++) { |
| snprintf(prop_str, sizeof(prop_str), |
| "qcom,corner%d-reg-config", i); |
| prop = of_find_property(of_node, prop_str, &len); |
| size = len / sizeof(u32); |
| if ((!prop) || (!size) || size < (num_corners * 2)) { |
| pr_err("%s property is missed or invalid length: len=%d\n", |
| prop_str, len); |
| return -EINVAL; |
| } |
| |
| reg_config_list = devm_kcalloc(mem_acc_vreg->dev, size / 2, |
| sizeof(*reg_config_list), GFP_KERNEL); |
| if (!reg_config_list) |
| return -ENOMEM; |
| |
| rc = mem_acc_get_reg_addr_val(of_node, prop_str, |
| reg_config_list, 0, size, |
| mem_acc_vreg->num_acc_reg); |
| if (rc) { |
| pr_err("Failed to read %s property: rc=%d\n", |
| prop_str, rc); |
| return rc; |
| } |
| |
| corner_acc_reg_config[i].max_reg_config_len = |
| size / (num_corners * 2); |
| corner_acc_reg_config[i].reg_config_list = reg_config_list; |
| |
| rc = mem_acc_reg_addr_val_dump(mem_acc_vreg, |
| &corner_acc_reg_config[i], i); |
| if (rc) { |
| pr_err("could not dump acc address-value dump for corner=%d: rc=%d\n", |
| i, rc); |
| return rc; |
| } |
| } |
| |
| mem_acc_vreg->corner_acc_reg_config = corner_acc_reg_config; |
| mem_acc_vreg->flags |= MEM_ACC_USE_ADDR_VAL_MAP; |
| return rc; |
| } |
| |
| #define MEM_TYPE_STRING_LEN 20 |
| static int mem_acc_init(struct platform_device *pdev, |
| struct mem_acc_regulator *mem_acc_vreg) |
| { |
| struct device_node *of_node = pdev->dev.of_node; |
| struct resource *res; |
| int len, rc, i, j; |
| bool acc_type_present = false; |
| char tmps[MEM_TYPE_STRING_LEN]; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "acc-en"); |
| if (!res || !res->start) { |
| pr_debug("'acc-en' resource missing or not used.\n"); |
| } else { |
| mem_acc_vreg->acc_en_addr = res->start; |
| len = res->end - res->start + 1; |
| pr_debug("'acc_en_addr' = %pa (len=0x%x)\n", &res->start, len); |
| |
| mem_acc_vreg->acc_en_base = devm_ioremap(mem_acc_vreg->dev, |
| mem_acc_vreg->acc_en_addr, len); |
| if (!mem_acc_vreg->acc_en_base) { |
| pr_err("Unable to map 'acc_en_addr' %pa\n", |
| &mem_acc_vreg->acc_en_addr); |
| return -EINVAL; |
| } |
| |
| rc = populate_acc_data(mem_acc_vreg, "qcom,acc-en-bit-pos", |
| &mem_acc_vreg->acc_en_bit_pos, |
| &mem_acc_vreg->num_acc_en); |
| if (rc) { |
| pr_err("Unable to populate 'qcom,acc-en-bit-pos' rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| |
| rc = mem_acc_efuse_init(pdev, mem_acc_vreg); |
| if (rc) { |
| pr_err("Wrong eFuse address specified: rc=%d\n", rc); |
| return rc; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "acc-sel-l1"); |
| if (!res || !res->start) { |
| pr_debug("'acc-sel-l1' resource missing or not used.\n"); |
| } else { |
| rc = mem_acc_sel_setup(mem_acc_vreg, res, MEMORY_L1); |
| if (rc) { |
| pr_err("Unable to setup mem-acc for mem_type=%d rc=%d\n", |
| MEMORY_L1, rc); |
| return rc; |
| } |
| mem_acc_vreg->mem_acc_supported[MEMORY_L1] = true; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "acc-sel-l2"); |
| if (!res || !res->start) { |
| pr_debug("'acc-sel-l2' resource missing or not used.\n"); |
| } else { |
| rc = mem_acc_sel_setup(mem_acc_vreg, res, MEMORY_L2); |
| if (rc) { |
| pr_err("Unable to setup mem-acc for mem_type=%d rc=%d\n", |
| MEMORY_L2, rc); |
| return rc; |
| } |
| mem_acc_vreg->mem_acc_supported[MEMORY_L2] = true; |
| } |
| |
| for (i = 0; i < MEM_ACC_TYPE_MAX; i++) { |
| snprintf(tmps, MEM_TYPE_STRING_LEN, "mem-acc-type%d", i + 1); |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, tmps); |
| |
| if (!res || !res->start) { |
| pr_debug("'%s' resource missing or not used.\n", tmps); |
| } else { |
| mem_acc_vreg->mem_acc_type_addr[i] = res->start; |
| acc_type_present = true; |
| } |
| } |
| |
| rc = mem_acc_get_reg_addr(mem_acc_vreg); |
| if (rc) { |
| pr_err("Unable to get acc register addresses: rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (mem_acc_vreg->phys_reg_addr_list) { |
| rc = mem_acc_reg_config_init(mem_acc_vreg); |
| if (rc) { |
| pr_err("acc register address-value map failed: rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| |
| if (of_find_property(of_node, "qcom,corner-acc-map", NULL)) { |
| rc = populate_acc_data(mem_acc_vreg, "qcom,corner-acc-map", |
| &mem_acc_vreg->corner_acc_map, |
| &mem_acc_vreg->num_corners); |
| |
| /* Check if at least one valid mem-acc config. is specified */ |
| for (i = 0; i < MEMORY_MAX; i++) { |
| if (mem_acc_vreg->mem_acc_supported[i]) |
| break; |
| } |
| if (i == MEMORY_MAX && !acc_type_present) { |
| pr_err("No mem-acc configuration specified\n"); |
| return -EINVAL; |
| } |
| |
| mem_acc_vreg->flags |= MEM_ACC_USE_CORNER_ACC_MAP; |
| } |
| |
| if ((mem_acc_vreg->flags & MEM_ACC_USE_CORNER_ACC_MAP) && |
| (mem_acc_vreg->flags & MEM_ACC_USE_ADDR_VAL_MAP)) { |
| pr_err("Invalid configuration, both qcom,corner-acc-map and qcom,cornerX-addr-val-map specified\n"); |
| return -EINVAL; |
| } |
| |
| pr_debug("num_corners = %d\n", mem_acc_vreg->num_corners); |
| |
| if (mem_acc_vreg->num_acc_en) |
| mem_acc_en_init(mem_acc_vreg); |
| |
| if (mem_acc_vreg->phys_reg_addr_list) { |
| rc = mem_acc_init_reg_config(mem_acc_vreg); |
| if (rc) { |
| pr_err("acc initial register configuration failed: rc=%d\n", |
| rc); |
| return rc; |
| } |
| } |
| |
| rc = mem_acc_sel_init(mem_acc_vreg); |
| if (rc) { |
| pr_err("Unable to initialize mem_acc_sel reg rc=%d\n", rc); |
| return rc; |
| } |
| |
| for (i = 0; i < MEMORY_MAX; i++) { |
| rc = mem_acc_custom_data_init(pdev, mem_acc_vreg, i); |
| if (rc) { |
| pr_err("Unable to initialize custom data for mem_type=%d rc=%d\n", |
| i, rc); |
| return rc; |
| } |
| } |
| |
| rc = mem_acc_parse_override_config(mem_acc_vreg); |
| if (rc) { |
| pr_err("Unable to parse mem acc override configuration, rc=%d\n", |
| rc); |
| return rc; |
| } |
| if (acc_type_present) { |
| mem_acc_vreg->mem_acc_type_data = devm_kzalloc( |
| mem_acc_vreg->dev, mem_acc_vreg->num_corners * |
| MEM_ACC_TYPE_MAX * sizeof(u32), GFP_KERNEL); |
| |
| if (!mem_acc_vreg->mem_acc_type_data) { |
| pr_err("Unable to allocate memory for mem_acc_type\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < MEM_ACC_TYPE_MAX; i++) { |
| if (mem_acc_vreg->mem_acc_type_addr[i]) { |
| snprintf(tmps, MEM_TYPE_STRING_LEN, |
| "qcom,mem-acc-type%d", i + 1); |
| |
| j = i * mem_acc_vreg->num_corners; |
| rc = of_property_read_u32_array( |
| mem_acc_vreg->dev->of_node, |
| tmps, |
| &mem_acc_vreg->mem_acc_type_data[j], |
| mem_acc_vreg->num_corners); |
| if (rc) { |
| pr_err("Unable to get property %s rc=%d\n", |
| tmps, rc); |
| return rc; |
| } |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int mem_acc_regulator_probe(struct platform_device *pdev) |
| { |
| struct regulator_config reg_config = {}; |
| struct mem_acc_regulator *mem_acc_vreg; |
| struct regulator_desc *rdesc; |
| struct regulator_init_data *init_data; |
| int rc; |
| |
| if (!pdev->dev.of_node) { |
| pr_err("Device tree node is missing\n"); |
| return -EINVAL; |
| } |
| |
| init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node, |
| NULL); |
| if (!init_data) { |
| pr_err("regulator init data is missing\n"); |
| return -EINVAL; |
| } |
| |
| init_data->constraints.input_uV = init_data->constraints.max_uV; |
| init_data->constraints.valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE; |
| |
| mem_acc_vreg = devm_kzalloc(&pdev->dev, sizeof(*mem_acc_vreg), |
| GFP_KERNEL); |
| if (!mem_acc_vreg) |
| return -ENOMEM; |
| |
| mem_acc_vreg->dev = &pdev->dev; |
| |
| rc = mem_acc_init(pdev, mem_acc_vreg); |
| if (rc) { |
| pr_err("Unable to initialize mem_acc configuration rc=%d\n", |
| rc); |
| return rc; |
| } |
| |
| rdesc = &mem_acc_vreg->rdesc; |
| rdesc->owner = THIS_MODULE; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->ops = &mem_acc_corner_ops; |
| rdesc->name = init_data->constraints.name; |
| |
| reg_config.dev = &pdev->dev; |
| reg_config.init_data = init_data; |
| reg_config.driver_data = mem_acc_vreg; |
| reg_config.of_node = pdev->dev.of_node; |
| mem_acc_vreg->rdev = regulator_register(rdesc, ®_config); |
| if (IS_ERR(mem_acc_vreg->rdev)) { |
| rc = PTR_ERR(mem_acc_vreg->rdev); |
| if (rc != -EPROBE_DEFER) |
| pr_err("regulator_register failed: rc=%d\n", rc); |
| return rc; |
| } |
| |
| platform_set_drvdata(pdev, mem_acc_vreg); |
| |
| return 0; |
| } |
| |
| static int mem_acc_regulator_remove(struct platform_device *pdev) |
| { |
| struct mem_acc_regulator *mem_acc_vreg = platform_get_drvdata(pdev); |
| |
| regulator_unregister(mem_acc_vreg->rdev); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mem_acc_regulator_match_table[] = { |
| { .compatible = "qcom,mem-acc-regulator", }, |
| {} |
| }; |
| |
| static struct platform_driver mem_acc_regulator_driver = { |
| .probe = mem_acc_regulator_probe, |
| .remove = mem_acc_regulator_remove, |
| .driver = { |
| .name = "qcom,mem-acc-regulator", |
| .of_match_table = mem_acc_regulator_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| int __init mem_acc_regulator_init(void) |
| { |
| return platform_driver_register(&mem_acc_regulator_driver); |
| } |
| postcore_initcall(mem_acc_regulator_init); |
| |
| static void __exit mem_acc_regulator_exit(void) |
| { |
| platform_driver_unregister(&mem_acc_regulator_driver); |
| } |
| module_exit(mem_acc_regulator_exit); |
| |
| MODULE_DESCRIPTION("MEM-ACC-SEL regulator driver"); |
| MODULE_LICENSE("GPL v2"); |