| /*************************************************************************** |
| * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * |
| * * |
| * Based on Logitech G13 driver (v0.4) * |
| * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * |
| * * |
| * This program is free software: you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License as published by * |
| * the Free Software Foundation, version 2 of the License. * |
| * * |
| * This driver is distributed in the hope that it will be useful, but * |
| * WITHOUT ANY WARRANTY; without even the implied warranty of * |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * |
| * General Public License for more details. * |
| * * |
| * You should have received a copy of the GNU General Public License * |
| * along with this software. If not see <http://www.gnu.org/licenses/>. * |
| ***************************************************************************/ |
| |
| #include <linux/hid.h> |
| #include <linux/hid-debug.h> |
| |
| #include <linux/fb.h> |
| #include <linux/seq_file.h> |
| #include <linux/debugfs.h> |
| |
| #include <linux/module.h> |
| #include <linux/uaccess.h> |
| |
| #include "hid-picolcd.h" |
| |
| |
| static int picolcd_debug_reset_show(struct seq_file *f, void *p) |
| { |
| if (picolcd_fbinfo((struct picolcd_data *)f->private)) |
| seq_printf(f, "all fb\n"); |
| else |
| seq_printf(f, "all\n"); |
| return 0; |
| } |
| |
| static int picolcd_debug_reset_open(struct inode *inode, struct file *f) |
| { |
| return single_open(f, picolcd_debug_reset_show, inode->i_private); |
| } |
| |
| static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| struct picolcd_data *data = ((struct seq_file *)f->private_data)->private; |
| char buf[32]; |
| size_t cnt = min(count, sizeof(buf)-1); |
| if (copy_from_user(buf, user_buf, cnt)) |
| return -EFAULT; |
| |
| while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n')) |
| cnt--; |
| buf[cnt] = '\0'; |
| if (strcmp(buf, "all") == 0) { |
| picolcd_reset(data->hdev); |
| picolcd_fb_reset(data, 1); |
| } else if (strcmp(buf, "fb") == 0) { |
| picolcd_fb_reset(data, 1); |
| } else { |
| return -EINVAL; |
| } |
| return count; |
| } |
| |
| static const struct file_operations picolcd_debug_reset_fops = { |
| .owner = THIS_MODULE, |
| .open = picolcd_debug_reset_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .write = picolcd_debug_reset_write, |
| .release = single_release, |
| }; |
| |
| /* |
| * The "eeprom" file |
| */ |
| static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u, |
| size_t s, loff_t *off) |
| { |
| struct picolcd_data *data = f->private_data; |
| struct picolcd_pending *resp; |
| u8 raw_data[3]; |
| ssize_t ret = -EIO; |
| |
| if (s == 0) |
| return -EINVAL; |
| if (*off > 0x0ff) |
| return 0; |
| |
| /* prepare buffer with info about what we want to read (addr & len) */ |
| raw_data[0] = *off & 0xff; |
| raw_data[1] = (*off >> 8) & 0xff; |
| raw_data[2] = s < 20 ? s : 20; |
| if (*off + raw_data[2] > 0xff) |
| raw_data[2] = 0x100 - *off; |
| resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data, |
| sizeof(raw_data)); |
| if (!resp) |
| return -EIO; |
| |
| if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { |
| /* successful read :) */ |
| ret = resp->raw_data[2]; |
| if (ret > s) |
| ret = s; |
| if (copy_to_user(u, resp->raw_data+3, ret)) |
| ret = -EFAULT; |
| else |
| *off += ret; |
| } /* anything else is some kind of IO error */ |
| |
| kfree(resp); |
| return ret; |
| } |
| |
| static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u, |
| size_t s, loff_t *off) |
| { |
| struct picolcd_data *data = f->private_data; |
| struct picolcd_pending *resp; |
| ssize_t ret = -EIO; |
| u8 raw_data[23]; |
| |
| if (s == 0) |
| return -EINVAL; |
| if (*off > 0x0ff) |
| return -ENOSPC; |
| |
| memset(raw_data, 0, sizeof(raw_data)); |
| raw_data[0] = *off & 0xff; |
| raw_data[1] = (*off >> 8) & 0xff; |
| raw_data[2] = min_t(size_t, 20, s); |
| if (*off + raw_data[2] > 0xff) |
| raw_data[2] = 0x100 - *off; |
| |
| if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) |
| return -EFAULT; |
| resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data, |
| sizeof(raw_data)); |
| |
| if (!resp) |
| return -EIO; |
| |
| if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) { |
| /* check if written data matches */ |
| if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) { |
| *off += raw_data[2]; |
| ret = raw_data[2]; |
| } |
| } |
| kfree(resp); |
| return ret; |
| } |
| |
| /* |
| * Notes: |
| * - read/write happens in chunks of at most 20 bytes, it's up to userspace |
| * to loop in order to get more data. |
| * - on write errors on otherwise correct write request the bytes |
| * that should have been written are in undefined state. |
| */ |
| static const struct file_operations picolcd_debug_eeprom_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = picolcd_debug_eeprom_read, |
| .write = picolcd_debug_eeprom_write, |
| .llseek = generic_file_llseek, |
| }; |
| |
| /* |
| * The "flash" file |
| */ |
| /* record a flash address to buf (bounds check to be done by caller) */ |
| static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off) |
| { |
| buf[0] = off & 0xff; |
| buf[1] = (off >> 8) & 0xff; |
| if (data->addr_sz == 3) |
| buf[2] = (off >> 16) & 0xff; |
| return data->addr_sz == 2 ? 2 : 3; |
| } |
| |
| /* read a given size of data (bounds check to be done by caller) */ |
| static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id, |
| char __user *u, size_t s, loff_t *off) |
| { |
| struct picolcd_pending *resp; |
| u8 raw_data[4]; |
| ssize_t ret = 0; |
| int len_off, err = -EIO; |
| |
| while (s > 0) { |
| err = -EIO; |
| len_off = _picolcd_flash_setaddr(data, raw_data, *off); |
| raw_data[len_off] = s > 32 ? 32 : s; |
| resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1); |
| if (!resp || !resp->in_report) |
| goto skip; |
| if (resp->in_report->id == REPORT_MEMORY || |
| resp->in_report->id == REPORT_BL_READ_MEMORY) { |
| if (memcmp(raw_data, resp->raw_data, len_off+1) != 0) |
| goto skip; |
| if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) { |
| err = -EFAULT; |
| goto skip; |
| } |
| *off += raw_data[len_off]; |
| s -= raw_data[len_off]; |
| ret += raw_data[len_off]; |
| err = 0; |
| } |
| skip: |
| kfree(resp); |
| if (err) |
| return ret > 0 ? ret : err; |
| } |
| return ret; |
| } |
| |
| static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u, |
| size_t s, loff_t *off) |
| { |
| struct picolcd_data *data = f->private_data; |
| |
| if (s == 0) |
| return -EINVAL; |
| if (*off > 0x05fff) |
| return 0; |
| if (*off + s > 0x05fff) |
| s = 0x06000 - *off; |
| |
| if (data->status & PICOLCD_BOOTLOADER) |
| return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off); |
| else |
| return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off); |
| } |
| |
| /* erase block aligned to 64bytes boundary */ |
| static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id, |
| loff_t *off) |
| { |
| struct picolcd_pending *resp; |
| u8 raw_data[3]; |
| int len_off; |
| ssize_t ret = -EIO; |
| |
| if (*off & 0x3f) |
| return -EINVAL; |
| |
| len_off = _picolcd_flash_setaddr(data, raw_data, *off); |
| resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off); |
| if (!resp || !resp->in_report) |
| goto skip; |
| if (resp->in_report->id == REPORT_MEMORY || |
| resp->in_report->id == REPORT_BL_ERASE_MEMORY) { |
| if (memcmp(raw_data, resp->raw_data, len_off) != 0) |
| goto skip; |
| ret = 0; |
| } |
| skip: |
| kfree(resp); |
| return ret; |
| } |
| |
| /* write a given size of data (bounds check to be done by caller) */ |
| static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id, |
| const char __user *u, size_t s, loff_t *off) |
| { |
| struct picolcd_pending *resp; |
| u8 raw_data[36]; |
| ssize_t ret = 0; |
| int len_off, err = -EIO; |
| |
| while (s > 0) { |
| err = -EIO; |
| len_off = _picolcd_flash_setaddr(data, raw_data, *off); |
| raw_data[len_off] = s > 32 ? 32 : s; |
| if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) { |
| err = -EFAULT; |
| break; |
| } |
| resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, |
| len_off+1+raw_data[len_off]); |
| if (!resp || !resp->in_report) |
| goto skip; |
| if (resp->in_report->id == REPORT_MEMORY || |
| resp->in_report->id == REPORT_BL_WRITE_MEMORY) { |
| if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0) |
| goto skip; |
| *off += raw_data[len_off]; |
| s -= raw_data[len_off]; |
| ret += raw_data[len_off]; |
| err = 0; |
| } |
| skip: |
| kfree(resp); |
| if (err) |
| break; |
| } |
| return ret > 0 ? ret : err; |
| } |
| |
| static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u, |
| size_t s, loff_t *off) |
| { |
| struct picolcd_data *data = f->private_data; |
| ssize_t err, ret = 0; |
| int report_erase, report_write; |
| |
| if (s == 0) |
| return -EINVAL; |
| if (*off > 0x5fff) |
| return -ENOSPC; |
| if (s & 0x3f) |
| return -EINVAL; |
| if (*off & 0x3f) |
| return -EINVAL; |
| |
| if (data->status & PICOLCD_BOOTLOADER) { |
| report_erase = REPORT_BL_ERASE_MEMORY; |
| report_write = REPORT_BL_WRITE_MEMORY; |
| } else { |
| report_erase = REPORT_ERASE_MEMORY; |
| report_write = REPORT_WRITE_MEMORY; |
| } |
| mutex_lock(&data->mutex_flash); |
| while (s > 0) { |
| err = _picolcd_flash_erase64(data, report_erase, off); |
| if (err) |
| break; |
| err = _picolcd_flash_write(data, report_write, u, 64, off); |
| if (err < 0) |
| break; |
| ret += err; |
| *off += err; |
| s -= err; |
| if (err != 64) |
| break; |
| } |
| mutex_unlock(&data->mutex_flash); |
| return ret > 0 ? ret : err; |
| } |
| |
| /* |
| * Notes: |
| * - concurrent writing is prevented by mutex and all writes must be |
| * n*64 bytes and 64-byte aligned, each write being preceded by an |
| * ERASE which erases a 64byte block. |
| * If less than requested was written or an error is returned for an |
| * otherwise correct write request the next 64-byte block which should |
| * have been written is in undefined state (mostly: original, erased, |
| * (half-)written with write error) |
| * - reading can happen without special restriction |
| */ |
| static const struct file_operations picolcd_debug_flash_fops = { |
| .owner = THIS_MODULE, |
| .open = simple_open, |
| .read = picolcd_debug_flash_read, |
| .write = picolcd_debug_flash_write, |
| .llseek = generic_file_llseek, |
| }; |
| |
| |
| /* |
| * Helper code for HID report level dumping/debugging |
| */ |
| static const char * const error_codes[] = { |
| "success", "parameter missing", "data_missing", "block readonly", |
| "block not erasable", "block too big", "section overflow", |
| "invalid command length", "invalid data length", |
| }; |
| |
| static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data, |
| const size_t data_len) |
| { |
| int i, j; |
| for (i = j = 0; i < data_len && j + 4 < dst_sz; i++) { |
| dst[j++] = hex_asc[(data[i] >> 4) & 0x0f]; |
| dst[j++] = hex_asc[data[i] & 0x0f]; |
| dst[j++] = ' '; |
| } |
| dst[j] = '\0'; |
| if (j > 0) |
| dst[j-1] = '\n'; |
| if (i < data_len && j > 2) |
| dst[j-2] = dst[j-3] = '.'; |
| } |
| |
| void picolcd_debug_out_report(struct picolcd_data *data, |
| struct hid_device *hdev, struct hid_report *report) |
| { |
| u8 *raw_data; |
| int raw_size = (report->size >> 3) + 1; |
| char *buff; |
| #define BUFF_SZ 256 |
| |
| /* Avoid unnecessary overhead if debugfs is disabled */ |
| if (list_empty(&hdev->debug_list)) |
| return; |
| |
| buff = kmalloc(BUFF_SZ, GFP_ATOMIC); |
| if (!buff) |
| return; |
| |
| raw_data = hid_alloc_report_buf(report, GFP_ATOMIC); |
| if (!raw_data) { |
| kfree(buff); |
| return; |
| } |
| |
| snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ", |
| report->id, raw_size); |
| hid_debug_event(hdev, buff); |
| raw_data[0] = report->id; |
| hid_output_report(report, raw_data); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size); |
| hid_debug_event(hdev, buff); |
| |
| switch (report->id) { |
| case REPORT_LED_STATE: |
| /* 1 data byte with GPO state */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_LED_STATE", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_BRIGHTNESS: |
| /* 1 data byte with brightness */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_BRIGHTNESS", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_CONTRAST: |
| /* 1 data byte with contrast */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_CONTRAST", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_RESET: |
| /* 2 data bytes with reset duration in ms */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_RESET", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n", |
| raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_LCD_CMD: |
| /* 63 data bytes with LCD commands */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_LCD_CMD", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| /* TODO: format decoding */ |
| break; |
| case REPORT_LCD_DATA: |
| /* 63 data bytes with LCD data */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_LCD_CMD", report->id, raw_size-1); |
| /* TODO: format decoding */ |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_LCD_CMD_DATA: |
| /* 63 data bytes with LCD commands and data */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_LCD_CMD", report->id, raw_size-1); |
| /* TODO: format decoding */ |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_EE_READ: |
| /* 3 data bytes with read area description */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_EE_READ", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_EE_WRITE: |
| /* 3+1..20 data bytes with write area description */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_EE_WRITE", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| hid_debug_event(hdev, buff); |
| if (raw_data[3] == 0) { |
| snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| } else if (raw_data[3] + 4 <= raw_size) { |
| snprintf(buff, BUFF_SZ, "\tData: "); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| } |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_ERASE_MEMORY: |
| case REPORT_BL_ERASE_MEMORY: |
| /* 3 data bytes with pointer inside erase block */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_ERASE_MEMORY", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| switch (data->addr_sz) { |
| case 2: |
| snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| break; |
| case 3: |
| snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n", |
| raw_data[3], raw_data[2], raw_data[1]); |
| break; |
| default: |
| snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| } |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_READ_MEMORY: |
| case REPORT_BL_READ_MEMORY: |
| /* 4 data bytes with read area description */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_READ_MEMORY", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| switch (data->addr_sz) { |
| case 2: |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| break; |
| case 3: |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", |
| raw_data[3], raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); |
| break; |
| default: |
| snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| } |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_WRITE_MEMORY: |
| case REPORT_BL_WRITE_MEMORY: |
| /* 4+1..32 data bytes with write adrea description */ |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_WRITE_MEMORY", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| switch (data->addr_sz) { |
| case 2: |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| hid_debug_event(hdev, buff); |
| if (raw_data[3] == 0) { |
| snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| } else if (raw_data[3] + 4 <= raw_size) { |
| snprintf(buff, BUFF_SZ, "\tData: "); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| } |
| break; |
| case 3: |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", |
| raw_data[3], raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); |
| hid_debug_event(hdev, buff); |
| if (raw_data[4] == 0) { |
| snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| } else if (raw_data[4] + 5 <= raw_size) { |
| snprintf(buff, BUFF_SZ, "\tData: "); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| } |
| break; |
| default: |
| snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| } |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_SPLASH_RESTART: |
| /* TODO */ |
| break; |
| case REPORT_EXIT_KEYBOARD: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_EXIT_KEYBOARD", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", |
| raw_data[1] | (raw_data[2] << 8), |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_VERSION: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_VERSION", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_DEVID: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_DEVID", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_SPLASH_SIZE: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_SPLASH_SIZE", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_HOOK_VERSION: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_HOOK_VERSION", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_EXIT_FLASHER: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "REPORT_VERSION", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n", |
| raw_data[1] | (raw_data[2] << 8), |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| default: |
| snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n", |
| "<unknown>", report->id, raw_size-1); |
| hid_debug_event(hdev, buff); |
| break; |
| } |
| wake_up_interruptible(&hdev->debug_wait); |
| kfree(raw_data); |
| kfree(buff); |
| } |
| |
| void picolcd_debug_raw_event(struct picolcd_data *data, |
| struct hid_device *hdev, struct hid_report *report, |
| u8 *raw_data, int size) |
| { |
| char *buff; |
| |
| #define BUFF_SZ 256 |
| /* Avoid unnecessary overhead if debugfs is disabled */ |
| if (list_empty(&hdev->debug_list)) |
| return; |
| |
| buff = kmalloc(BUFF_SZ, GFP_ATOMIC); |
| if (!buff) |
| return; |
| |
| switch (report->id) { |
| case REPORT_ERROR_CODE: |
| /* 2 data bytes with affected report and error code */ |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_ERROR_CODE", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| if (raw_data[2] < ARRAY_SIZE(error_codes)) |
| snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n", |
| raw_data[2], error_codes[raw_data[2]], raw_data[1]); |
| else |
| snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_KEY_STATE: |
| /* 2 data bytes with key state */ |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_KEY_STATE", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| if (raw_data[1] == 0) |
| snprintf(buff, BUFF_SZ, "\tNo key pressed\n"); |
| else if (raw_data[2] == 0) |
| snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n", |
| raw_data[1], raw_data[1]); |
| else |
| snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n", |
| raw_data[1], raw_data[1], raw_data[2], raw_data[2]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_IR_DATA: |
| /* Up to 20 byes of IR scancode data */ |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_IR_DATA", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| if (raw_data[1] == 0) { |
| snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n"); |
| hid_debug_event(hdev, buff); |
| } else if (raw_data[1] + 1 <= size) { |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ", |
| raw_data[1]); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]); |
| hid_debug_event(hdev, buff); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n", |
| raw_data[1]-1); |
| hid_debug_event(hdev, buff); |
| } |
| break; |
| case REPORT_EE_DATA: |
| /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */ |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_EE_DATA", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| hid_debug_event(hdev, buff); |
| if (raw_data[3] == 0) { |
| snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| hid_debug_event(hdev, buff); |
| } else if (raw_data[3] + 4 <= size) { |
| snprintf(buff, BUFF_SZ, "\tData: "); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| hid_debug_event(hdev, buff); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| hid_debug_event(hdev, buff); |
| } |
| break; |
| case REPORT_MEMORY: |
| /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */ |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_MEMORY", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| switch (data->addr_sz) { |
| case 2: |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]); |
| hid_debug_event(hdev, buff); |
| if (raw_data[3] == 0) { |
| snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| } else if (raw_data[3] + 4 <= size) { |
| snprintf(buff, BUFF_SZ, "\tData: "); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| } |
| break; |
| case 3: |
| snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n", |
| raw_data[3], raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]); |
| hid_debug_event(hdev, buff); |
| if (raw_data[4] == 0) { |
| snprintf(buff, BUFF_SZ, "\tNo data\n"); |
| } else if (raw_data[4] + 5 <= size) { |
| snprintf(buff, BUFF_SZ, "\tData: "); |
| hid_debug_event(hdev, buff); |
| dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]); |
| } else { |
| snprintf(buff, BUFF_SZ, "\tData overflowed\n"); |
| } |
| break; |
| default: |
| snprintf(buff, BUFF_SZ, "\tNot supported\n"); |
| } |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_VERSION: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_VERSION", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", |
| raw_data[2], raw_data[1]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_BL_ERASE_MEMORY: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_BL_ERASE_MEMORY", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| /* TODO */ |
| break; |
| case REPORT_BL_READ_MEMORY: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_BL_READ_MEMORY", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| /* TODO */ |
| break; |
| case REPORT_BL_WRITE_MEMORY: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_BL_WRITE_MEMORY", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| /* TODO */ |
| break; |
| case REPORT_DEVID: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_DEVID", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n", |
| raw_data[1], raw_data[2], raw_data[3], raw_data[4]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n", |
| raw_data[5]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_SPLASH_SIZE: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_SPLASH_SIZE", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n", |
| (raw_data[2] << 8) | raw_data[1]); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n", |
| (raw_data[4] << 8) | raw_data[3]); |
| hid_debug_event(hdev, buff); |
| break; |
| case REPORT_HOOK_VERSION: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "REPORT_HOOK_VERSION", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n", |
| raw_data[1], raw_data[2]); |
| hid_debug_event(hdev, buff); |
| break; |
| default: |
| snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n", |
| "<unknown>", report->id, size-1); |
| hid_debug_event(hdev, buff); |
| break; |
| } |
| wake_up_interruptible(&hdev->debug_wait); |
| kfree(buff); |
| } |
| |
| void picolcd_init_devfs(struct picolcd_data *data, |
| struct hid_report *eeprom_r, struct hid_report *eeprom_w, |
| struct hid_report *flash_r, struct hid_report *flash_w, |
| struct hid_report *reset) |
| { |
| struct hid_device *hdev = data->hdev; |
| |
| mutex_init(&data->mutex_flash); |
| |
| /* reset */ |
| if (reset) |
| data->debug_reset = debugfs_create_file("reset", 0600, |
| hdev->debug_dir, data, &picolcd_debug_reset_fops); |
| |
| /* eeprom */ |
| if (eeprom_r || eeprom_w) |
| data->debug_eeprom = debugfs_create_file("eeprom", |
| (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0), |
| hdev->debug_dir, data, &picolcd_debug_eeprom_fops); |
| |
| /* flash */ |
| if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8) |
| data->addr_sz = flash_r->field[0]->report_count - 1; |
| else |
| data->addr_sz = -1; |
| if (data->addr_sz == 2 || data->addr_sz == 3) { |
| data->debug_flash = debugfs_create_file("flash", |
| (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0), |
| hdev->debug_dir, data, &picolcd_debug_flash_fops); |
| } else if (flash_r || flash_w) |
| hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n"); |
| } |
| |
| void picolcd_exit_devfs(struct picolcd_data *data) |
| { |
| struct dentry *dent; |
| |
| dent = data->debug_reset; |
| data->debug_reset = NULL; |
| if (dent) |
| debugfs_remove(dent); |
| dent = data->debug_eeprom; |
| data->debug_eeprom = NULL; |
| if (dent) |
| debugfs_remove(dent); |
| dent = data->debug_flash; |
| data->debug_flash = NULL; |
| if (dent) |
| debugfs_remove(dent); |
| mutex_destroy(&data->mutex_flash); |
| } |
| |