| /* |
| * Driver for the enhanced rotary controller on pxa930 and pxa935 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| |
| #include <linux/platform_data/keyboard-pxa930_rotary.h> |
| |
| #define SBCR (0x04) |
| #define ERCR (0x0c) |
| |
| #define SBCR_ERSB (1 << 5) |
| |
| struct pxa930_rotary { |
| struct input_dev *input_dev; |
| void __iomem *mmio_base; |
| int last_ercr; |
| |
| struct pxa930_rotary_platform_data *pdata; |
| }; |
| |
| static void clear_sbcr(struct pxa930_rotary *r) |
| { |
| uint32_t sbcr = __raw_readl(r->mmio_base + SBCR); |
| |
| __raw_writel(sbcr | SBCR_ERSB, r->mmio_base + SBCR); |
| __raw_writel(sbcr & ~SBCR_ERSB, r->mmio_base + SBCR); |
| } |
| |
| static irqreturn_t rotary_irq(int irq, void *dev_id) |
| { |
| struct pxa930_rotary *r = dev_id; |
| struct pxa930_rotary_platform_data *pdata = r->pdata; |
| int ercr, delta, key; |
| |
| ercr = __raw_readl(r->mmio_base + ERCR) & 0xf; |
| clear_sbcr(r); |
| |
| delta = ercr - r->last_ercr; |
| if (delta == 0) |
| return IRQ_HANDLED; |
| |
| r->last_ercr = ercr; |
| |
| if (pdata->up_key && pdata->down_key) { |
| key = (delta > 0) ? pdata->up_key : pdata->down_key; |
| input_report_key(r->input_dev, key, 1); |
| input_sync(r->input_dev); |
| input_report_key(r->input_dev, key, 0); |
| } else |
| input_report_rel(r->input_dev, pdata->rel_code, delta); |
| |
| input_sync(r->input_dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pxa930_rotary_open(struct input_dev *dev) |
| { |
| struct pxa930_rotary *r = input_get_drvdata(dev); |
| |
| clear_sbcr(r); |
| |
| return 0; |
| } |
| |
| static void pxa930_rotary_close(struct input_dev *dev) |
| { |
| struct pxa930_rotary *r = input_get_drvdata(dev); |
| |
| clear_sbcr(r); |
| } |
| |
| static int pxa930_rotary_probe(struct platform_device *pdev) |
| { |
| struct pxa930_rotary_platform_data *pdata = |
| dev_get_platdata(&pdev->dev); |
| struct pxa930_rotary *r; |
| struct input_dev *input_dev; |
| struct resource *res; |
| int irq; |
| int err; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq for rotary controller\n"); |
| return -ENXIO; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "no I/O memory defined\n"); |
| return -ENXIO; |
| } |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data defined\n"); |
| return -EINVAL; |
| } |
| |
| r = kzalloc(sizeof(struct pxa930_rotary), GFP_KERNEL); |
| if (!r) |
| return -ENOMEM; |
| |
| r->mmio_base = ioremap_nocache(res->start, resource_size(res)); |
| if (r->mmio_base == NULL) { |
| dev_err(&pdev->dev, "failed to remap IO memory\n"); |
| err = -ENXIO; |
| goto failed_free; |
| } |
| |
| r->pdata = pdata; |
| platform_set_drvdata(pdev, r); |
| |
| /* allocate and register the input device */ |
| input_dev = input_allocate_device(); |
| if (!input_dev) { |
| dev_err(&pdev->dev, "failed to allocate input device\n"); |
| err = -ENOMEM; |
| goto failed_free_io; |
| } |
| |
| input_dev->name = pdev->name; |
| input_dev->id.bustype = BUS_HOST; |
| input_dev->open = pxa930_rotary_open; |
| input_dev->close = pxa930_rotary_close; |
| input_dev->dev.parent = &pdev->dev; |
| |
| if (pdata->up_key && pdata->down_key) { |
| __set_bit(pdata->up_key, input_dev->keybit); |
| __set_bit(pdata->down_key, input_dev->keybit); |
| __set_bit(EV_KEY, input_dev->evbit); |
| } else { |
| __set_bit(pdata->rel_code, input_dev->relbit); |
| __set_bit(EV_REL, input_dev->evbit); |
| } |
| |
| r->input_dev = input_dev; |
| input_set_drvdata(input_dev, r); |
| |
| err = request_irq(irq, rotary_irq, 0, |
| "enhanced rotary", r); |
| if (err) { |
| dev_err(&pdev->dev, "failed to request IRQ\n"); |
| goto failed_free_input; |
| } |
| |
| err = input_register_device(input_dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to register input device\n"); |
| goto failed_free_irq; |
| } |
| |
| return 0; |
| |
| failed_free_irq: |
| free_irq(irq, r); |
| failed_free_input: |
| input_free_device(input_dev); |
| failed_free_io: |
| iounmap(r->mmio_base); |
| failed_free: |
| kfree(r); |
| return err; |
| } |
| |
| static int pxa930_rotary_remove(struct platform_device *pdev) |
| { |
| struct pxa930_rotary *r = platform_get_drvdata(pdev); |
| |
| free_irq(platform_get_irq(pdev, 0), r); |
| input_unregister_device(r->input_dev); |
| iounmap(r->mmio_base); |
| kfree(r); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pxa930_rotary_driver = { |
| .driver = { |
| .name = "pxa930-rotary", |
| .owner = THIS_MODULE, |
| }, |
| .probe = pxa930_rotary_probe, |
| .remove = pxa930_rotary_remove, |
| }; |
| module_platform_driver(pxa930_rotary_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller"); |
| MODULE_AUTHOR("Yao Yong <yaoyong@marvell.com>"); |