Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 8144ac59bdc9205c45cd8c45374967e6be90f7d8 / . / drivers / gpu / drm / drm_crtc.c
blob: e600a5fb2b60f65b1de6a72168f16baaf83c63fb [file] [log] [blame]
/*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2008 Red Hat Inc.
*
* DRM core CRTC related functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Keith Packard
* Eric Anholt <eric@anholt.net>
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/ctype.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_atomic.h>
#include "drm_crtc_internal.h"
#include "drm_internal.h"
static struct drm_framebuffer *
internal_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd2 *r,
struct drm_file *file_priv);
/* Avoid boilerplate. I'm tired of typing. */
#define DRM_ENUM_NAME_FN(fnname, list) \
const char *fnname(int val) \
{ \
int i; \
for (i = 0; i < ARRAY_SIZE(list); i++) { \
if (list[i].type == val) \
return list[i].name; \
} \
return "(unknown)"; \
}
/*
* Global properties
*/
static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
{ DRM_MODE_DPMS_ON, "On" },
{ DRM_MODE_DPMS_STANDBY, "Standby" },
{ DRM_MODE_DPMS_SUSPEND, "Suspend" },
{ DRM_MODE_DPMS_OFF, "Off" }
};
DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
{ DRM_PLANE_TYPE_PRIMARY, "Primary" },
{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
};
/*
* Optional properties
*/
static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
{ DRM_MODE_SCALE_NONE, "None" },
{ DRM_MODE_SCALE_FULLSCREEN, "Full" },
{ DRM_MODE_SCALE_CENTER, "Center" },
{ DRM_MODE_SCALE_ASPECT, "Full aspect" },
};
static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
{ DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
{ DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
};
/*
* Non-global properties, but "required" for certain connectors.
*/
static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
{ DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
};
DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
{ DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
};
DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
drm_dvi_i_subconnector_enum_list)
static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
{ DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
{ DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
};
DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
{ DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
{ DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
};
DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
drm_tv_subconnector_enum_list)
static const struct drm_prop_enum_list drm_dirty_info_enum_list[] = {
{ DRM_MODE_DIRTY_OFF, "Off" },
{ DRM_MODE_DIRTY_ON, "On" },
{ DRM_MODE_DIRTY_ANNOTATE, "Annotate" },
};
struct drm_conn_prop_enum_list {
int type;
const char *name;
struct ida ida;
};
/*
* Connector and encoder types.
*/
static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
{ DRM_MODE_CONNECTOR_Unknown, "Unknown" },
{ DRM_MODE_CONNECTOR_VGA, "VGA" },
{ DRM_MODE_CONNECTOR_DVII, "DVI-I" },
{ DRM_MODE_CONNECTOR_DVID, "DVI-D" },
{ DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
{ DRM_MODE_CONNECTOR_Composite, "Composite" },
{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
{ DRM_MODE_CONNECTOR_LVDS, "LVDS" },
{ DRM_MODE_CONNECTOR_Component, "Component" },
{ DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
{ DRM_MODE_CONNECTOR_DisplayPort, "DP" },
{ DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
{ DRM_MODE_CONNECTOR_TV, "TV" },
{ DRM_MODE_CONNECTOR_eDP, "eDP" },
{ DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
{ DRM_MODE_CONNECTOR_DSI, "DSI" },
};
static const struct drm_prop_enum_list drm_encoder_enum_list[] = {
{ DRM_MODE_ENCODER_NONE, "None" },
{ DRM_MODE_ENCODER_DAC, "DAC" },
{ DRM_MODE_ENCODER_TMDS, "TMDS" },
{ DRM_MODE_ENCODER_LVDS, "LVDS" },
{ DRM_MODE_ENCODER_TVDAC, "TV" },
{ DRM_MODE_ENCODER_VIRTUAL, "Virtual" },
{ DRM_MODE_ENCODER_DSI, "DSI" },
{ DRM_MODE_ENCODER_DPMST, "DP MST" },
};
static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
{ SubPixelUnknown, "Unknown" },
{ SubPixelHorizontalRGB, "Horizontal RGB" },
{ SubPixelHorizontalBGR, "Horizontal BGR" },
{ SubPixelVerticalRGB, "Vertical RGB" },
{ SubPixelVerticalBGR, "Vertical BGR" },
{ SubPixelNone, "None" },
};
void drm_connector_ida_init(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
ida_init(&drm_connector_enum_list[i].ida);
}
void drm_connector_ida_destroy(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
ida_destroy(&drm_connector_enum_list[i].ida);
}
/**
* drm_get_connector_status_name - return a string for connector status
* @status: connector status to compute name of
*
* In contrast to the other drm_get_*_name functions this one here returns a
* const pointer and hence is threadsafe.
*/
const char *drm_get_connector_status_name(enum drm_connector_status status)
{
if (status == connector_status_connected)
return "connected";
else if (status == connector_status_disconnected)
return "disconnected";
else
return "unknown";
}
EXPORT_SYMBOL(drm_get_connector_status_name);
/**
* drm_get_subpixel_order_name - return a string for a given subpixel enum
* @order: enum of subpixel_order
*
* Note you could abuse this and return something out of bounds, but that
* would be a caller error. No unscrubbed user data should make it here.
*/
const char *drm_get_subpixel_order_name(enum subpixel_order order)
{
return drm_subpixel_enum_list[order].name;
}
EXPORT_SYMBOL(drm_get_subpixel_order_name);
static char printable_char(int c)
{
return isascii(c) && isprint(c) ? c : '?';
}
/**
* drm_get_format_name - return a string for drm fourcc format
* @format: format to compute name of
*
* Note that the buffer used by this function is globally shared and owned by
* the function itself.
*
* FIXME: This isn't really multithreading safe.
*/
const char *drm_get_format_name(uint32_t format)
{
static char buf[32];
snprintf(buf, sizeof(buf),
"%c%c%c%c %s-endian (0x%08x)",
printable_char(format & 0xff),
printable_char((format >> 8) & 0xff),
printable_char((format >> 16) & 0xff),
printable_char((format >> 24) & 0x7f),
format & DRM_FORMAT_BIG_ENDIAN ? "big" : "little",
format);
return buf;
}
EXPORT_SYMBOL(drm_get_format_name);
/*
* Internal function to assign a slot in the object idr and optionally
* register the object into the idr.
*/
static int drm_mode_object_get_reg(struct drm_device *dev,
struct drm_mode_object *obj,
uint32_t obj_type,
bool register_obj)
{
int ret;
mutex_lock(&dev->mode_config.idr_mutex);
ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL);
if (ret >= 0) {
/*
* Set up the object linking under the protection of the idr
* lock so that other users can't see inconsistent state.
*/
obj->id = ret;
obj->type = obj_type;
}
mutex_unlock(&dev->mode_config.idr_mutex);
return ret < 0 ? ret : 0;
}
/**
* drm_mode_object_get - allocate a new modeset identifier
* @dev: DRM device
* @obj: object pointer, used to generate unique ID
* @obj_type: object type
*
* Create a unique identifier based on @ptr in @dev's identifier space. Used
* for tracking modes, CRTCs and connectors. Note that despite the _get postfix
* modeset identifiers are _not_ reference counted. Hence don't use this for
* reference counted modeset objects like framebuffers.
*
* Returns:
* New unique (relative to other objects in @dev) integer identifier for the
* object.
*/
int drm_mode_object_get(struct drm_device *dev,
struct drm_mode_object *obj, uint32_t obj_type)
{
return drm_mode_object_get_reg(dev, obj, obj_type, true);
}
static void drm_mode_object_register(struct drm_device *dev,
struct drm_mode_object *obj)
{
mutex_lock(&dev->mode_config.idr_mutex);
idr_replace(&dev->mode_config.crtc_idr, obj, obj->id);
mutex_unlock(&dev->mode_config.idr_mutex);
}
/**
* drm_mode_object_put - free a modeset identifer
* @dev: DRM device
* @object: object to free
*
* Free @id from @dev's unique identifier pool. Note that despite the _get
* postfix modeset identifiers are _not_ reference counted. Hence don't use this
* for reference counted modeset objects like framebuffers.
*/
void drm_mode_object_put(struct drm_device *dev,
struct drm_mode_object *object)
{
mutex_lock(&dev->mode_config.idr_mutex);
idr_remove(&dev->mode_config.crtc_idr, object->id);
mutex_unlock(&dev->mode_config.idr_mutex);
}
static struct drm_mode_object *_object_find(struct drm_device *dev,
uint32_t id, uint32_t type)
{
struct drm_mode_object *obj = NULL;
mutex_lock(&dev->mode_config.idr_mutex);
obj = idr_find(&dev->mode_config.crtc_idr, id);
if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type)
obj = NULL;
if (obj && obj->id != id)
obj = NULL;
/* don't leak out unref'd fb's */
if (obj &&
(obj->type == DRM_MODE_OBJECT_FB ||
obj->type == DRM_MODE_OBJECT_BLOB))
obj = NULL;
mutex_unlock(&dev->mode_config.idr_mutex);
return obj;
}
/**
* drm_mode_object_find - look up a drm object with static lifetime
* @dev: drm device
* @id: id of the mode object
* @type: type of the mode object
*
* Note that framebuffers cannot be looked up with this functions - since those
* are reference counted, they need special treatment. Even with
* DRM_MODE_OBJECT_ANY (although that will simply return NULL
* rather than WARN_ON()).
*/
struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
uint32_t id, uint32_t type)
{
struct drm_mode_object *obj = NULL;
/* Framebuffers are reference counted and need their own lookup
* function.*/
WARN_ON(type == DRM_MODE_OBJECT_FB || type == DRM_MODE_OBJECT_BLOB);
obj = _object_find(dev, id, type);
return obj;
}
EXPORT_SYMBOL(drm_mode_object_find);
/**
* drm_framebuffer_init - initialize a framebuffer
* @dev: DRM device
* @fb: framebuffer to be initialized
* @funcs: ... with these functions
*
* Allocates an ID for the framebuffer's parent mode object, sets its mode
* functions & device file and adds it to the master fd list.
*
* IMPORTANT:
* This functions publishes the fb and makes it available for concurrent access
* by other users. Which means by this point the fb _must_ be fully set up -
* since all the fb attributes are invariant over its lifetime, no further
* locking but only correct reference counting is required.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb,
const struct drm_framebuffer_funcs *funcs)
{
int ret;
mutex_lock(&dev->mode_config.fb_lock);
kref_init(&fb->refcount);
INIT_LIST_HEAD(&fb->filp_head);
fb->dev = dev;
fb->funcs = funcs;
ret = drm_mode_object_get(dev, &fb->base, DRM_MODE_OBJECT_FB);
if (ret)
goto out;
dev->mode_config.num_fb++;
list_add(&fb->head, &dev->mode_config.fb_list);
out:
mutex_unlock(&dev->mode_config.fb_lock);
return 0;
}
EXPORT_SYMBOL(drm_framebuffer_init);
/* dev->mode_config.fb_lock must be held! */
static void __drm_framebuffer_unregister(struct drm_device *dev,
struct drm_framebuffer *fb)
{
mutex_lock(&dev->mode_config.idr_mutex);
idr_remove(&dev->mode_config.crtc_idr, fb->base.id);
mutex_unlock(&dev->mode_config.idr_mutex);
fb->base.id = 0;
}
static void drm_framebuffer_free(struct kref *kref)
{
struct drm_framebuffer *fb =
container_of(kref, struct drm_framebuffer, refcount);
struct drm_device *dev = fb->dev;
/*
* The lookup idr holds a weak reference, which has not necessarily been
* removed at this point. Check for that.
*/
mutex_lock(&dev->mode_config.fb_lock);
if (fb->base.id) {
/* Mark fb as reaped and drop idr ref. */
__drm_framebuffer_unregister(dev, fb);
}
mutex_unlock(&dev->mode_config.fb_lock);
fb->funcs->destroy(fb);
}
static struct drm_framebuffer *__drm_framebuffer_lookup(struct drm_device *dev,
uint32_t id)
{
struct drm_mode_object *obj = NULL;
struct drm_framebuffer *fb;
mutex_lock(&dev->mode_config.idr_mutex);
obj = idr_find(&dev->mode_config.crtc_idr, id);
if (!obj || (obj->type != DRM_MODE_OBJECT_FB) || (obj->id != id))
fb = NULL;
else
fb = obj_to_fb(obj);
mutex_unlock(&dev->mode_config.idr_mutex);
return fb;
}
/**
* drm_framebuffer_lookup - look up a drm framebuffer and grab a reference
* @dev: drm device
* @id: id of the fb object
*
* If successful, this grabs an additional reference to the framebuffer -
* callers need to make sure to eventually unreference the returned framebuffer
* again, using @drm_framebuffer_unreference.
*/
struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev,
uint32_t id)
{
struct drm_framebuffer *fb;
mutex_lock(&dev->mode_config.fb_lock);
fb = __drm_framebuffer_lookup(dev, id);
if (fb) {
if (!kref_get_unless_zero(&fb->refcount))
fb = NULL;
}
mutex_unlock(&dev->mode_config.fb_lock);
return fb;
}
EXPORT_SYMBOL(drm_framebuffer_lookup);
/**
* drm_framebuffer_unreference - unref a framebuffer
* @fb: framebuffer to unref
*
* This functions decrements the fb's refcount and frees it if it drops to zero.
*/
void drm_framebuffer_unreference(struct drm_framebuffer *fb)
{
DRM_DEBUG("%p: FB ID: %d (%d)\n", fb, fb->base.id, atomic_read(&fb->refcount.refcount));
kref_put(&fb->refcount, drm_framebuffer_free);
}
EXPORT_SYMBOL(drm_framebuffer_unreference);
/**
* drm_framebuffer_reference - incr the fb refcnt
* @fb: framebuffer
*
* This functions increments the fb's refcount.
*/
void drm_framebuffer_reference(struct drm_framebuffer *fb)
{
DRM_DEBUG("%p: FB ID: %d (%d)\n", fb, fb->base.id, atomic_read(&fb->refcount.refcount));
kref_get(&fb->refcount);
}
EXPORT_SYMBOL(drm_framebuffer_reference);
/**
* drm_framebuffer_unregister_private - unregister a private fb from the lookup idr
* @fb: fb to unregister
*
* Drivers need to call this when cleaning up driver-private framebuffers, e.g.
* those used for fbdev. Note that the caller must hold a reference of it's own,
* i.e. the object may not be destroyed through this call (since it'll lead to a
* locking inversion).
*/
void drm_framebuffer_unregister_private(struct drm_framebuffer *fb)
{
struct drm_device *dev;
if (!fb)
return;
dev = fb->dev;
mutex_lock(&dev->mode_config.fb_lock);
/* Mark fb as reaped and drop idr ref. */
__drm_framebuffer_unregister(dev, fb);
mutex_unlock(&dev->mode_config.fb_lock);
}
EXPORT_SYMBOL(drm_framebuffer_unregister_private);
/**
* drm_framebuffer_cleanup - remove a framebuffer object
* @fb: framebuffer to remove
*
* Cleanup framebuffer. This function is intended to be used from the drivers
* ->destroy callback. It can also be used to clean up driver private
* framebuffers embedded into a larger structure.
*
* Note that this function does not remove the fb from active usuage - if it is
* still used anywhere, hilarity can ensue since userspace could call getfb on
* the id and get back -EINVAL. Obviously no concern at driver unload time.
*
* Also, the framebuffer will not be removed from the lookup idr - for
* user-created framebuffers this will happen in in the rmfb ioctl. For
* driver-private objects (e.g. for fbdev) drivers need to explicitly call
* drm_framebuffer_unregister_private.
*/
void drm_framebuffer_cleanup(struct drm_framebuffer *fb)
{
struct drm_device *dev = fb->dev;
mutex_lock(&dev->mode_config.fb_lock);
list_del(&fb->head);
dev->mode_config.num_fb--;
mutex_unlock(&dev->mode_config.fb_lock);
}
EXPORT_SYMBOL(drm_framebuffer_cleanup);
/**
* drm_framebuffer_remove - remove and unreference a framebuffer object
* @fb: framebuffer to remove
*
* Scans all the CRTCs and planes in @dev's mode_config. If they're
* using @fb, removes it, setting it to NULL. Then drops the reference to the
* passed-in framebuffer. Might take the modeset locks.
*
* Note that this function optimizes the cleanup away if the caller holds the
* last reference to the framebuffer. It is also guaranteed to not take the
* modeset locks in this case.
*/
void drm_framebuffer_remove(struct drm_framebuffer *fb)
{
struct drm_device *dev;
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_mode_set set;
int ret;
if (!fb)
return;
dev = fb->dev;
WARN_ON(!list_empty(&fb->filp_head));
/*
* drm ABI mandates that we remove any deleted framebuffers from active
* useage. But since most sane clients only remove framebuffers they no
* longer need, try to optimize this away.
*
* Since we're holding a reference ourselves, observing a refcount of 1
* means that we're the last holder and can skip it. Also, the refcount
* can never increase from 1 again, so we don't need any barriers or
* locks.
*
* Note that userspace could try to race with use and instate a new
* usage _after_ we've cleared all current ones. End result will be an
* in-use fb with fb-id == 0. Userspace is allowed to shoot its own foot
* in this manner.
*/
if (atomic_read(&fb->refcount.refcount) > 1) {
drm_modeset_lock_all(dev);
/* remove from any CRTC */
drm_for_each_crtc(crtc, dev) {
if (crtc->primary->fb == fb) {
/* should turn off the crtc */
memset(&set, 0, sizeof(struct drm_mode_set));
set.crtc = crtc;
set.fb = NULL;
ret = drm_mode_set_config_internal(&set);
if (ret)
DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc);
}
}
drm_for_each_plane(plane, dev) {
if (plane->fb == fb)
drm_plane_force_disable(plane);
}
drm_modeset_unlock_all(dev);
}
drm_framebuffer_unreference(fb);
}
EXPORT_SYMBOL(drm_framebuffer_remove);
DEFINE_WW_CLASS(crtc_ww_class);
/**
* drm_crtc_init_with_planes - Initialise a new CRTC object with
* specified primary and cursor planes.
* @dev: DRM device
* @crtc: CRTC object to init
* @primary: Primary plane for CRTC
* @cursor: Cursor plane for CRTC
* @funcs: callbacks for the new CRTC
*
* Inits a new object created as base part of a driver crtc object.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc,
struct drm_plane *primary,
struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs)
{
struct drm_mode_config *config = &dev->mode_config;
int ret;
WARN_ON(primary && primary->type != DRM_PLANE_TYPE_PRIMARY);
WARN_ON(cursor && cursor->type != DRM_PLANE_TYPE_CURSOR);
crtc->dev = dev;
crtc->funcs = funcs;
crtc->invert_dimensions = false;
drm_modeset_lock_init(&crtc->mutex);
ret = drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
if (ret)
return ret;
crtc->base.properties = &crtc->properties;
list_add_tail(&crtc->head, &config->crtc_list);
config->num_crtc++;
crtc->primary = primary;
crtc->cursor = cursor;
if (primary)
primary->possible_crtcs = 1 << drm_crtc_index(crtc);
if (cursor)
cursor->possible_crtcs = 1 << drm_crtc_index(crtc);
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&crtc->base, config->prop_active, 0);
drm_object_attach_property(&crtc->base, config->prop_mode_id, 0);
}
return 0;
}
EXPORT_SYMBOL(drm_crtc_init_with_planes);
/**
* drm_crtc_cleanup - Clean up the core crtc usage
* @crtc: CRTC to cleanup
*
* This function cleans up @crtc and removes it from the DRM mode setting
* core. Note that the function does *not* free the crtc structure itself,
* this is the responsibility of the caller.
*/
void drm_crtc_cleanup(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
kfree(crtc->gamma_store);
crtc->gamma_store = NULL;
drm_modeset_lock_fini(&crtc->mutex);
drm_mode_object_put(dev, &crtc->base);
list_del(&crtc->head);
dev->mode_config.num_crtc--;
WARN_ON(crtc->state && !crtc->funcs->atomic_destroy_state);
if (crtc->state && crtc->funcs->atomic_destroy_state)
crtc->funcs->atomic_destroy_state(crtc, crtc->state);
memset(crtc, 0, sizeof(*crtc));
}
EXPORT_SYMBOL(drm_crtc_cleanup);
/**
* drm_crtc_index - find the index of a registered CRTC
* @crtc: CRTC to find index for
*
* Given a registered CRTC, return the index of that CRTC within a DRM
* device's list of CRTCs.
*/
unsigned int drm_crtc_index(struct drm_crtc *crtc)
{
unsigned int index = 0;
struct drm_crtc *tmp;
drm_for_each_crtc(tmp, crtc->dev) {
if (tmp == crtc)
return index;
index++;
}
BUG();
}
EXPORT_SYMBOL(drm_crtc_index);
/*
* drm_mode_remove - remove and free a mode
* @connector: connector list to modify
* @mode: mode to remove
*
* Remove @mode from @connector's mode list, then free it.
*/
static void drm_mode_remove(struct drm_connector *connector,
struct drm_display_mode *mode)
{
list_del(&mode->head);
drm_mode_destroy(connector->dev, mode);
}
/**
* drm_display_info_set_bus_formats - set the supported bus formats
* @info: display info to store bus formats in
* @formats: array containing the supported bus formats
* @num_formats: the number of entries in the fmts array
*
* Store the supported bus formats in display info structure.
* See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for
* a full list of available formats.
*/
int drm_display_info_set_bus_formats(struct drm_display_info *info,
const u32 *formats,
unsigned int num_formats)
{
u32 *fmts = NULL;
if (!formats && num_formats)
return -EINVAL;
if (formats && num_formats) {
fmts = kmemdup(formats, sizeof(*formats) * num_formats,
GFP_KERNEL);
if (!fmts)
return -ENOMEM;
}
kfree(info->bus_formats);
info->bus_formats = fmts;
info->num_bus_formats = num_formats;
return 0;
}
EXPORT_SYMBOL(drm_display_info_set_bus_formats);
/**
* drm_connector_get_cmdline_mode - reads the user's cmdline mode
* @connector: connector to quwery
*
* The kernel supports per-connector configration of its consoles through
* use of the video= parameter. This function parses that option and
* extracts the user's specified mode (or enable/disable status) for a
* particular connector. This is typically only used during the early fbdev
* setup.
*/
static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
{
struct drm_cmdline_mode *mode = &connector->cmdline_mode;
char *option = NULL;
if (fb_get_options(connector->name, &option))
return;
if (!drm_mode_parse_command_line_for_connector(option,
connector,
mode))
return;
if (mode->force) {
const char *s;
switch (mode->force) {
case DRM_FORCE_OFF:
s = "OFF";
break;
case DRM_FORCE_ON_DIGITAL:
s = "ON - dig";
break;
default:
case DRM_FORCE_ON:
s = "ON";
break;
}
DRM_INFO("forcing %s connector %s\n", connector->name, s);
connector->force = mode->force;
}
DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
connector->name,
mode->xres, mode->yres,
mode->refresh_specified ? mode->refresh : 60,
mode->rb ? " reduced blanking" : "",
mode->margins ? " with margins" : "",
mode->interlace ? " interlaced" : "");
}
/**
* drm_connector_init - Init a preallocated connector
* @dev: DRM device
* @connector: the connector to init
* @funcs: callbacks for this connector
* @connector_type: user visible type of the connector
*
* Initialises a preallocated connector. Connectors should be
* subclassed as part of driver connector objects.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_connector_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
int connector_type)
{
struct drm_mode_config *config = &dev->mode_config;
int ret;
struct ida *connector_ida =
&drm_connector_enum_list[connector_type].ida;
drm_modeset_lock_all(dev);
ret = drm_mode_object_get_reg(dev, &connector->base, DRM_MODE_OBJECT_CONNECTOR, false);
if (ret)
goto out_unlock;
connector->base.properties = &connector->properties;
connector->dev = dev;
connector->funcs = funcs;
connector->connector_type = connector_type;
connector->connector_type_id =
ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
if (connector->connector_type_id < 0) {
ret = connector->connector_type_id;
goto out_put;
}
connector->name =
kasprintf(GFP_KERNEL, "%s-%d",
drm_connector_enum_list[connector_type].name,
connector->connector_type_id);
if (!connector->name) {
ret = -ENOMEM;
goto out_put;
}
INIT_LIST_HEAD(&connector->probed_modes);
INIT_LIST_HEAD(&connector->modes);
connector->edid_blob_ptr = NULL;
connector->status = connector_status_unknown;
drm_connector_get_cmdline_mode(connector);
/* We should add connectors at the end to avoid upsetting the connector
* index too much. */
list_add_tail(&connector->head, &config->connector_list);
config->num_connector++;
if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
drm_object_attach_property(&connector->base,
config->edid_property,
0);
drm_object_attach_property(&connector->base,
config->dpms_property, 0);
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
}
connector->debugfs_entry = NULL;
out_put:
if (ret)
drm_mode_object_put(dev, &connector->base);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
EXPORT_SYMBOL(drm_connector_init);
/**
* drm_connector_cleanup - cleans up an initialised connector
* @connector: connector to cleanup
*
* Cleans up the connector but doesn't free the object.
*/
void drm_connector_cleanup(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode, *t;
if (connector->tile_group) {
drm_mode_put_tile_group(dev, connector->tile_group);
connector->tile_group = NULL;
}
list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
drm_mode_remove(connector, mode);
list_for_each_entry_safe(mode, t, &connector->modes, head)
drm_mode_remove(connector, mode);
ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
connector->connector_type_id);
kfree(connector->display_info.bus_formats);
drm_mode_object_put(dev, &connector->base);
kfree(connector->name);
connector->name = NULL;
list_del(&connector->head);
dev->mode_config.num_connector--;
WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
if (connector->state && connector->funcs->atomic_destroy_state)
connector->funcs->atomic_destroy_state(connector,
connector->state);
memset(connector, 0, sizeof(*connector));
}
EXPORT_SYMBOL(drm_connector_cleanup);
/**
* drm_connector_index - find the index of a registered connector
* @connector: connector to find index for
*
* Given a registered connector, return the index of that connector within a DRM
* device's list of connectors.
*/
unsigned int drm_connector_index(struct drm_connector *connector)
{
unsigned int index = 0;
struct drm_connector *tmp;
struct drm_mode_config *config = &connector->dev->mode_config;
WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
drm_for_each_connector(tmp, connector->dev) {
if (tmp == connector)
return index;
index++;
}
BUG();
}
EXPORT_SYMBOL(drm_connector_index);
/**
* drm_connector_register - register a connector
* @connector: the connector to register
*
* Register userspace interfaces for a connector
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_connector_register(struct drm_connector *connector)
{
int ret;
drm_mode_object_register(connector->dev, &connector->base);
ret = drm_sysfs_connector_add(connector);
if (ret)
return ret;
ret = drm_debugfs_connector_add(connector);
if (ret) {
drm_sysfs_connector_remove(connector);
return ret;
}
return 0;
}
EXPORT_SYMBOL(drm_connector_register);
/**
* drm_connector_unregister - unregister a connector
* @connector: the connector to unregister
*
* Unregister userspace interfaces for a connector
*/
void drm_connector_unregister(struct drm_connector *connector)
{
drm_sysfs_connector_remove(connector);
drm_debugfs_connector_remove(connector);
}
EXPORT_SYMBOL(drm_connector_unregister);
/**
* drm_connector_unplug_all - unregister connector userspace interfaces
* @dev: drm device
*
* This function unregisters all connector userspace interfaces in sysfs. Should
* be call when the device is disconnected, e.g. from an usb driver's
* ->disconnect callback.
*/
void drm_connector_unplug_all(struct drm_device *dev)
{
struct drm_connector *connector;
/* FIXME: taking the mode config mutex ends up in a clash with sysfs */
list_for_each_entry(connector, &dev->mode_config.connector_list, head)
drm_connector_unregister(connector);
}
EXPORT_SYMBOL(drm_connector_unplug_all);
/**
* drm_encoder_init - Init a preallocated encoder
* @dev: drm device
* @encoder: the encoder to init
* @funcs: callbacks for this encoder
* @encoder_type: user visible type of the encoder
*
* Initialises a preallocated encoder. Encoder should be
* subclassed as part of driver encoder objects.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type)
{
int ret;
drm_modeset_lock_all(dev);
ret = drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER);
if (ret)
goto out_unlock;
encoder->dev = dev;
encoder->encoder_type = encoder_type;
encoder->funcs = funcs;
encoder->name = kasprintf(GFP_KERNEL, "%s-%d",
drm_encoder_enum_list[encoder_type].name,
encoder->base.id);
if (!encoder->name) {
ret = -ENOMEM;
goto out_put;
}
list_add_tail(&encoder->head, &dev->mode_config.encoder_list);
dev->mode_config.num_encoder++;
out_put:
if (ret)
drm_mode_object_put(dev, &encoder->base);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
EXPORT_SYMBOL(drm_encoder_init);
/**
* drm_encoder_cleanup - cleans up an initialised encoder
* @encoder: encoder to cleanup
*
* Cleans up the encoder but doesn't free the object.
*/
void drm_encoder_cleanup(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
drm_modeset_lock_all(dev);
drm_mode_object_put(dev, &encoder->base);
kfree(encoder->name);
list_del(&encoder->head);
dev->mode_config.num_encoder--;
drm_modeset_unlock_all(dev);
memset(encoder, 0, sizeof(*encoder));
}
EXPORT_SYMBOL(drm_encoder_cleanup);
/**
* drm_universal_plane_init - Initialize a new universal plane object
* @dev: DRM device
* @plane: plane object to init
* @possible_crtcs: bitmask of possible CRTCs
* @funcs: callbacks for the new plane
* @formats: array of supported formats (%DRM_FORMAT_*)
* @format_count: number of elements in @formats
* @type: type of plane (overlay, primary, cursor)
*
* Initializes a plane object of type @type.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
enum drm_plane_type type)
{
struct drm_mode_config *config = &dev->mode_config;
int ret;
ret = drm_mode_object_get(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
if (ret)
return ret;
drm_modeset_lock_init(&plane->mutex);
plane->base.properties = &plane->properties;
plane->dev = dev;
plane->funcs = funcs;
plane->format_types = kmalloc_array(format_count, sizeof(uint32_t),
GFP_KERNEL);
if (!plane->format_types) {
DRM_DEBUG_KMS("out of memory when allocating plane\n");
drm_mode_object_put(dev, &plane->base);
return -ENOMEM;
}
memcpy(plane->format_types, formats, format_count * sizeof(uint32_t));
plane->format_count = format_count;
plane->possible_crtcs = possible_crtcs;
plane->type = type;
list_add_tail(&plane->head, &config->plane_list);
config->num_total_plane++;
if (plane->type == DRM_PLANE_TYPE_OVERLAY)
config->num_overlay_plane++;
drm_object_attach_property(&plane->base,
config->plane_type_property,
plane->type);
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
drm_object_attach_property(&plane->base, config->prop_src_x, 0);
drm_object_attach_property(&plane->base, config->prop_src_y, 0);
drm_object_attach_property(&plane->base, config->prop_src_w, 0);
drm_object_attach_property(&plane->base, config->prop_src_h, 0);
}
return 0;
}
EXPORT_SYMBOL(drm_universal_plane_init);
/**
* drm_plane_init - Initialize a legacy plane
* @dev: DRM device
* @plane: plane object to init
* @possible_crtcs: bitmask of possible CRTCs
* @funcs: callbacks for the new plane
* @formats: array of supported formats (%DRM_FORMAT_*)
* @format_count: number of elements in @formats
* @is_primary: plane type (primary vs overlay)
*
* Legacy API to initialize a DRM plane.
*
* New drivers should call drm_universal_plane_init() instead.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
bool is_primary)
{
enum drm_plane_type type;
type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY;
return drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
formats, format_count, type);
}
EXPORT_SYMBOL(drm_plane_init);
/**
* drm_plane_cleanup - Clean up the core plane usage
* @plane: plane to cleanup
*
* This function cleans up @plane and removes it from the DRM mode setting
* core. Note that the function does *not* free the plane structure itself,
* this is the responsibility of the caller.
*/
void drm_plane_cleanup(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
drm_modeset_lock_all(dev);
kfree(plane->format_types);
drm_mode_object_put(dev, &plane->base);
BUG_ON(list_empty(&plane->head));
list_del(&plane->head);
dev->mode_config.num_total_plane--;
if (plane->type == DRM_PLANE_TYPE_OVERLAY)
dev->mode_config.num_overlay_plane--;
drm_modeset_unlock_all(dev);
WARN_ON(plane->state && !plane->funcs->atomic_destroy_state);
if (plane->state && plane->funcs->atomic_destroy_state)
plane->funcs->atomic_destroy_state(plane, plane->state);
memset(plane, 0, sizeof(*plane));
}
EXPORT_SYMBOL(drm_plane_cleanup);
/**
* drm_plane_index - find the index of a registered plane
* @plane: plane to find index for
*
* Given a registered plane, return the index of that CRTC within a DRM
* device's list of planes.
*/
unsigned int drm_plane_index(struct drm_plane *plane)
{
unsigned int index = 0;
struct drm_plane *tmp;
drm_for_each_plane(tmp, plane->dev) {
if (tmp == plane)
return index;
index++;
}
BUG();
}
EXPORT_SYMBOL(drm_plane_index);
/**
* drm_plane_from_index - find the registered plane at an index
* @dev: DRM device
* @idx: index of registered plane to find for
*
* Given a plane index, return the registered plane from DRM device's
* list of planes with matching index.
*/
struct drm_plane *
drm_plane_from_index(struct drm_device *dev, int idx)
{
struct drm_plane *plane;
unsigned int i = 0;
drm_for_each_plane(plane, dev) {
if (i == idx)
return plane;
i++;
}
return NULL;
}
EXPORT_SYMBOL(drm_plane_from_index);
/**
* drm_plane_force_disable - Forcibly disable a plane
* @plane: plane to disable
*
* Forces the plane to be disabled.
*
* Used when the plane's current framebuffer is destroyed,
* and when restoring fbdev mode.
*/
void drm_plane_force_disable(struct drm_plane *plane)
{
int ret;
if (!plane->fb)
return;
plane->old_fb = plane->fb;
ret = plane->funcs->disable_plane(plane);
if (ret) {
DRM_ERROR("failed to disable plane with busy fb\n");
plane->old_fb = NULL;
return;
}
/* disconnect the plane from the fb and crtc: */
drm_framebuffer_unreference(plane->old_fb);
plane->old_fb = NULL;
plane->fb = NULL;
plane->crtc = NULL;
}
EXPORT_SYMBOL(drm_plane_force_disable);
static int drm_mode_create_standard_properties(struct drm_device *dev)
{
struct drm_property *prop;
/*
* Standard properties (apply to all connectors)
*/
prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
DRM_MODE_PROP_IMMUTABLE,
"EDID", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.edid_property = prop;
prop = drm_property_create_enum(dev, 0,
"DPMS", drm_dpms_enum_list,
ARRAY_SIZE(drm_dpms_enum_list));
if (!prop)
return -ENOMEM;
dev->mode_config.dpms_property = prop;
prop = drm_property_create(dev,
DRM_MODE_PROP_BLOB |
DRM_MODE_PROP_IMMUTABLE,
"PATH", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.path_property = prop;
prop = drm_property_create(dev,
DRM_MODE_PROP_BLOB |
DRM_MODE_PROP_IMMUTABLE,
"TILE", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.tile_property = prop;
prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
"type", drm_plane_type_enum_list,
ARRAY_SIZE(drm_plane_type_enum_list));
if (!prop)
return -ENOMEM;
dev->mode_config.plane_type_property = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_X", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_x = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_Y", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_y = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_W", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_w = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"SRC_H", 0, UINT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_src_h = prop;
prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_X", INT_MIN, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_x = prop;
prop = drm_property_create_signed_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_Y", INT_MIN, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_y = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_W", 0, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_w = prop;
prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_H", 0, INT_MAX);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_h = prop;
prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
"FB_ID", DRM_MODE_OBJECT_FB);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_fb_id = prop;
prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC,
"CRTC_ID", DRM_MODE_OBJECT_CRTC);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_crtc_id = prop;
prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC,
"ACTIVE");
if (!prop)
return -ENOMEM;
dev->mode_config.prop_active = prop;
prop = drm_property_create(dev,
DRM_MODE_PROP_ATOMIC | DRM_MODE_PROP_BLOB,
"MODE_ID", 0);
if (!prop)
return -ENOMEM;
dev->mode_config.prop_mode_id = prop;
return 0;
}
/**
* drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
* @dev: DRM device
*
* Called by a driver the first time a DVI-I connector is made.
*/
int drm_mode_create_dvi_i_properties(struct drm_device *dev)
{
struct drm_property *dvi_i_selector;
struct drm_property *dvi_i_subconnector;
if (dev->mode_config.dvi_i_select_subconnector_property)
return 0;
dvi_i_selector =
drm_property_create_enum(dev, 0,
"select subconnector",
drm_dvi_i_select_enum_list,
ARRAY_SIZE(drm_dvi_i_select_enum_list));
dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
"subconnector",
drm_dvi_i_subconnector_enum_list,
ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
return 0;
}
EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
/**
* drm_create_tv_properties - create TV specific connector properties
* @dev: DRM device
* @num_modes: number of different TV formats (modes) supported
* @modes: array of pointers to strings containing name of each format
*
* Called by a driver's TV initialization routine, this function creates
* the TV specific connector properties for a given device. Caller is
* responsible for allocating a list of format names and passing them to
* this routine.
*/
int drm_mode_create_tv_properties(struct drm_device *dev,
unsigned int num_modes,
const char * const modes[])
{
struct drm_property *tv_selector;
struct drm_property *tv_subconnector;
unsigned int i;
if (dev->mode_config.tv_select_subconnector_property)
return 0;
/*
* Basic connector properties
*/
tv_selector = drm_property_create_enum(dev, 0,
"select subconnector",
drm_tv_select_enum_list,
ARRAY_SIZE(drm_tv_select_enum_list));
dev->mode_config.tv_select_subconnector_property = tv_selector;
tv_subconnector =
drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
"subconnector",
drm_tv_subconnector_enum_list,
ARRAY_SIZE(drm_tv_subconnector_enum_list));
dev->mode_config.tv_subconnector_property = tv_subconnector;
/*
* Other, TV specific properties: margins & TV modes.
*/
dev->mode_config.tv_left_margin_property =
drm_property_create_range(dev, 0, "left margin", 0, 100);
dev->mode_config.tv_right_margin_property =
drm_property_create_range(dev, 0, "right margin", 0, 100);
dev->mode_config.tv_top_margin_property =
drm_property_create_range(dev, 0, "top margin", 0, 100);
dev->mode_config.tv_bottom_margin_property =
drm_property_create_range(dev, 0, "bottom margin", 0, 100);
dev->mode_config.tv_mode_property =
drm_property_create(dev, DRM_MODE_PROP_ENUM,
"mode", num_modes);
for (i = 0; i < num_modes; i++)
drm_property_add_enum(dev->mode_config.tv_mode_property, i,
i, modes[i]);
dev->mode_config.tv_brightness_property =
drm_property_create_range(dev, 0, "brightness", 0, 100);
dev->mode_config.tv_contrast_property =
drm_property_create_range(dev, 0, "contrast", 0, 100);
dev->mode_config.tv_flicker_reduction_property =
drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
dev->mode_config.tv_overscan_property =
drm_property_create_range(dev, 0, "overscan", 0, 100);
dev->mode_config.tv_saturation_property =
drm_property_create_range(dev, 0, "saturation", 0, 100);
dev->mode_config.tv_hue_property =
drm_property_create_range(dev, 0, "hue", 0, 100);
return 0;
}
EXPORT_SYMBOL(drm_mode_create_tv_properties);
/**
* drm_mode_create_scaling_mode_property - create scaling mode property
* @dev: DRM device
*
* Called by a driver the first time it's needed, must be attached to desired
* connectors.
*/
int drm_mode_create_scaling_mode_property(struct drm_device *dev)
{
struct drm_property *scaling_mode;
if (dev->mode_config.scaling_mode_property)
return 0;
scaling_mode =
drm_property_create_enum(dev, 0, "scaling mode",
drm_scaling_mode_enum_list,
ARRAY_SIZE(drm_scaling_mode_enum_list));
dev->mode_config.scaling_mode_property = scaling_mode;
return 0;
}
EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
/**
* drm_mode_create_aspect_ratio_property - create aspect ratio property
* @dev: DRM device
*
* Called by a driver the first time it's needed, must be attached to desired
* connectors.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
{
if (dev->mode_config.aspect_ratio_property)
return 0;
dev->mode_config.aspect_ratio_property =
drm_property_create_enum(dev, 0, "aspect ratio",
drm_aspect_ratio_enum_list,
ARRAY_SIZE(drm_aspect_ratio_enum_list));
if (dev->mode_config.aspect_ratio_property == NULL)
return -ENOMEM;
return 0;
}
EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
/**
* drm_mode_create_dirty_property - create dirty property
* @dev: DRM device
*
* Called by a driver the first time it's needed, must be attached to desired
* connectors.
*/
int drm_mode_create_dirty_info_property(struct drm_device *dev)
{
struct drm_property *dirty_info;
if (dev->mode_config.dirty_info_property)
return 0;
dirty_info =
drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
"dirty",
drm_dirty_info_enum_list,
ARRAY_SIZE(drm_dirty_info_enum_list));
dev->mode_config.dirty_info_property = dirty_info;
return 0;
}
EXPORT_SYMBOL(drm_mode_create_dirty_info_property);
/**
* drm_mode_create_suggested_offset_properties - create suggests offset properties
* @dev: DRM device
*
* Create the the suggested x/y offset property for connectors.
*/
int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
{
if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
return 0;
dev->mode_config.suggested_x_property =
drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
dev->mode_config.suggested_y_property =
drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
if (dev->mode_config.suggested_x_property == NULL ||
dev->mode_config.suggested_y_property == NULL)
return -ENOMEM;
return 0;
}
EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
/**
* drm_mode_getresources - get graphics configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a set of configuration description structures and return
* them to the user, including CRTC, connector and framebuffer configuration.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getresources(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_card_res *card_res = data;
struct list_head *lh;
struct drm_framebuffer *fb;
struct drm_connector *connector;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
int ret = 0;
int connector_count = 0;
int crtc_count = 0;
int fb_count = 0;
int encoder_count = 0;
int copied = 0;
uint32_t __user *fb_id;
uint32_t __user *crtc_id;
uint32_t __user *connector_id;
uint32_t __user *encoder_id;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
mutex_lock(&file_priv->fbs_lock);
/*
* For the non-control nodes we need to limit the list of resources
* by IDs in the group list for this node
*/
list_for_each(lh, &file_priv->fbs)
fb_count++;
/* handle this in 4 parts */
/* FBs */
if (card_res->count_fbs >= fb_count) {
copied = 0;
fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
list_for_each_entry(fb, &file_priv->fbs, filp_head) {
if (put_user(fb->base.id, fb_id + copied)) {
mutex_unlock(&file_priv->fbs_lock);
return -EFAULT;
}
copied++;
}
}
card_res->count_fbs = fb_count;
mutex_unlock(&file_priv->fbs_lock);
/* mode_config.mutex protects the connector list against e.g. DP MST
* connector hot-adding. CRTC/Plane lists are invariant. */
mutex_lock(&dev->mode_config.mutex);
drm_for_each_crtc(crtc, dev)
crtc_count++;
drm_for_each_connector(connector, dev)
connector_count++;
drm_for_each_encoder(encoder, dev)
encoder_count++;
card_res->max_height = dev->mode_config.max_height;
card_res->min_height = dev->mode_config.min_height;
card_res->max_width = dev->mode_config.max_width;
card_res->min_width = dev->mode_config.min_width;
/* CRTCs */
if (card_res->count_crtcs >= crtc_count) {
copied = 0;
crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr;
drm_for_each_crtc(crtc, dev) {
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
if (put_user(crtc->base.id, crtc_id + copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
card_res->count_crtcs = crtc_count;
/* Encoders */
if (card_res->count_encoders >= encoder_count) {
copied = 0;
encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr;
drm_for_each_encoder(encoder, dev) {
DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", encoder->base.id,
encoder->name);
if (put_user(encoder->base.id, encoder_id +
copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
card_res->count_encoders = encoder_count;
/* Connectors */
if (card_res->count_connectors >= connector_count) {
copied = 0;
connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr;
drm_for_each_connector(connector, dev) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
if (put_user(connector->base.id,
connector_id + copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
card_res->count_connectors = connector_count;
DRM_DEBUG_KMS("CRTC[%d] CONNECTORS[%d] ENCODERS[%d]\n", card_res->count_crtcs,
card_res->count_connectors, card_res->count_encoders);
out:
mutex_unlock(&dev->mode_config.mutex);
return ret;
}
/**
* drm_mode_getcrtc - get CRTC configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a CRTC configuration structure to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc *crtc_resp = data;
struct drm_crtc *crtc;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
crtc = drm_crtc_find(dev, crtc_resp->crtc_id);
if (!crtc)
return -ENOENT;
drm_modeset_lock_crtc(crtc, crtc->primary);
crtc_resp->gamma_size = crtc->gamma_size;
if (crtc->primary->fb)
crtc_resp->fb_id = crtc->primary->fb->base.id;
else
crtc_resp->fb_id = 0;
if (crtc->state) {
crtc_resp->x = crtc->primary->state->src_x >> 16;
crtc_resp->y = crtc->primary->state->src_y >> 16;
if (crtc->state->enable) {
drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->state->mode);
crtc_resp->mode_valid = 1;
} else {
crtc_resp->mode_valid = 0;
}
} else {
crtc_resp->x = crtc->x;
crtc_resp->y = crtc->y;
if (crtc->enabled) {
drm_mode_convert_to_umode(&crtc_resp->mode, &crtc->mode);
crtc_resp->mode_valid = 1;
} else {
crtc_resp->mode_valid = 0;
}
}
drm_modeset_unlock_crtc(crtc);
return 0;
}
static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
const struct drm_file *file_priv)
{
/*
* If user-space hasn't configured the driver to expose the stereo 3D
* modes, don't expose them.
*/
if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
return false;
return true;
}
static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
{
/* For atomic drivers only state objects are synchronously updated and
* protected by modeset locks, so check those first. */
if (connector->state)
return connector->state->best_encoder;
return connector->encoder;
}
/* helper for getconnector and getproperties ioctls */
static int get_properties(struct drm_mode_object *obj, bool atomic,
uint32_t __user *prop_ptr, uint64_t __user *prop_values,
uint32_t *arg_count_props)
{
int props_count;
int i, ret, copied;
props_count = obj->properties->count;
if (!atomic)
props_count -= obj->properties->atomic_count;
if ((*arg_count_props >= props_count) && props_count) {
for (i = 0, copied = 0; copied < props_count; i++) {
struct drm_property *prop = obj->properties->properties[i];
uint64_t val;
if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic)
continue;
ret = drm_object_property_get_value(obj, prop, &val);
if (ret)
return ret;
if (put_user(prop->base.id, prop_ptr + copied))
return -EFAULT;
if (put_user(val, prop_values + copied))
return -EFAULT;
copied++;
}
}
*arg_count_props = props_count;
return 0;
}
/**
* drm_mode_getconnector - get connector configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a connector configuration structure to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getconnector(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_connector *out_resp = data;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *mode;
int mode_count = 0;
int encoders_count = 0;
int ret = 0;
int copied = 0;
int i;
struct drm_mode_modeinfo u_mode;
struct drm_mode_modeinfo __user *mode_ptr;
uint32_t __user *encoder_ptr;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id);
mutex_lock(&dev->mode_config.mutex);
connector = drm_connector_find(dev, out_resp->connector_id);
if (!connector) {
ret = -ENOENT;
goto out_unlock;
}
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
if (connector->encoder_ids[i] != 0)
encoders_count++;
if (out_resp->count_modes == 0) {
connector->funcs->fill_modes(connector,
dev->mode_config.max_width,
dev->mode_config.max_height);
}
/* delayed so we get modes regardless of pre-fill_modes state */
list_for_each_entry(mode, &connector->modes, head)
if (drm_mode_expose_to_userspace(mode, file_priv))
mode_count++;
out_resp->connector_id = connector->base.id;
out_resp->connector_type = connector->connector_type;
out_resp->connector_type_id = connector->connector_type_id;
out_resp->mm_width = connector->display_info.width_mm;
out_resp->mm_height = connector->display_info.height_mm;
out_resp->subpixel = connector->display_info.subpixel_order;
out_resp->connection = connector->status;
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
encoder = drm_connector_get_encoder(connector);
if (encoder)
out_resp->encoder_id = encoder->base.id;
else
out_resp->encoder_id = 0;
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
*/
if ((out_resp->count_modes >= mode_count) && mode_count) {
copied = 0;
mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
list_for_each_entry(mode, &connector->modes, head) {
if (!drm_mode_expose_to_userspace(mode, file_priv))
continue;
drm_mode_convert_to_umode(&u_mode, mode);
if (copy_to_user(mode_ptr + copied,
&u_mode, sizeof(u_mode))) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
out_resp->count_modes = mode_count;
ret = get_properties(&connector->base, file_priv->atomic,
(uint32_t __user *)(unsigned long)(out_resp->props_ptr),
(uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
&out_resp->count_props);
if (ret)
goto out;
if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
copied = 0;
encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
if (connector->encoder_ids[i] != 0) {
if (put_user(connector->encoder_ids[i],
encoder_ptr + copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
}
out_resp->count_encoders = encoders_count;
out:
drm_modeset_unlock(&dev->mode_config.connection_mutex);
out_unlock:
mutex_unlock(&dev->mode_config.mutex);
return ret;
}
static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder)
{
struct drm_connector *connector;
struct drm_device *dev = encoder->dev;
bool uses_atomic = false;
/* For atomic drivers only state objects are synchronously updated and
* protected by modeset locks, so check those first. */
drm_for_each_connector(connector, dev) {
if (!connector->state)
continue;
uses_atomic = true;
if (connector->state->best_encoder != encoder)
continue;
return connector->state->crtc;
}
/* Don't return stale data (e.g. pending async disable). */
if (uses_atomic)
return NULL;
return encoder->crtc;
}
/**
* drm_mode_getencoder - get encoder configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Construct a encoder configuration structure to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getencoder(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_encoder *enc_resp = data;
struct drm_encoder *encoder;
struct drm_crtc *crtc;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
encoder = drm_encoder_find(dev, enc_resp->encoder_id);
if (!encoder)
return -ENOENT;
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
crtc = drm_encoder_get_crtc(encoder);
if (crtc)
enc_resp->crtc_id = crtc->base.id;
else
enc_resp->crtc_id = 0;
drm_modeset_unlock(&dev->mode_config.connection_mutex);
enc_resp->encoder_type = encoder->encoder_type;
enc_resp->encoder_id = encoder->base.id;
enc_resp->possible_crtcs = encoder->possible_crtcs;
enc_resp->possible_clones = encoder->possible_clones;
return 0;
}
/**
* drm_mode_getplane_res - enumerate all plane resources
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Construct a list of plane ids to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getplane_res(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_plane_res *plane_resp = data;
struct drm_mode_config *config;
struct drm_plane *plane;
uint32_t __user *plane_ptr;
int copied = 0;
unsigned num_planes;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
config = &dev->mode_config;
if (file_priv->universal_planes)
num_planes = config->num_total_plane;
else
num_planes = config->num_overlay_plane;
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
*/
if (num_planes &&
(plane_resp->count_planes >= num_planes)) {
plane_ptr = (uint32_t __user *)(unsigned long)plane_resp->plane_id_ptr;
/* Plane lists are invariant, no locking needed. */
drm_for_each_plane(plane, dev) {
/*
* Unless userspace set the 'universal planes'
* capability bit, only advertise overlays.
*/
if (plane->type != DRM_PLANE_TYPE_OVERLAY &&
!file_priv->universal_planes)
continue;
if (put_user(plane->base.id, plane_ptr + copied))
return -EFAULT;
copied++;
}
}
plane_resp->count_planes = num_planes;
return 0;
}
/**
* drm_mode_getplane - get plane configuration
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Construct a plane configuration structure to return to the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_plane *plane_resp = data;
struct drm_plane *plane;
uint32_t __user *format_ptr;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
plane = drm_plane_find(dev, plane_resp->plane_id);
if (!plane)
return -ENOENT;
drm_modeset_lock(&plane->mutex, NULL);
if (plane->crtc)
plane_resp->crtc_id = plane->crtc->base.id;
else
plane_resp->crtc_id = 0;
if (plane->fb)
plane_resp->fb_id = plane->fb->base.id;
else
plane_resp->fb_id = 0;
drm_modeset_unlock(&plane->mutex);
plane_resp->plane_id = plane->base.id;
plane_resp->possible_crtcs = plane->possible_crtcs;
plane_resp->gamma_size = 0;
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
*/
if (plane->format_count &&
(plane_resp->count_format_types >= plane->format_count)) {
format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr;
if (copy_to_user(format_ptr,
plane->format_types,
sizeof(uint32_t) * plane->format_count)) {
return -EFAULT;
}
}
plane_resp->count_format_types = plane->format_count;
return 0;
}
/**
* drm_plane_check_pixel_format - Check if the plane supports the pixel format
* @plane: plane to check for format support
* @format: the pixel format
*
* Returns:
* Zero of @plane has @format in its list of supported pixel formats, -EINVAL
* otherwise.
*/
int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format)
{
unsigned int i;
for (i = 0; i < plane->format_count; i++) {
if (format == plane->format_types[i])
return 0;
}
return -EINVAL;
}
/*
* setplane_internal - setplane handler for internal callers
*
* Note that we assume an extra reference has already been taken on fb. If the
* update fails, this reference will be dropped before return; if it succeeds,
* the previous framebuffer (if any) will be unreferenced instead.
*
* src_{x,y,w,h} are provided in 16.16 fixed point format
*/
static int __setplane_internal(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
/* src_{x,y,w,h} values are 16.16 fixed point */
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
int ret = 0;
unsigned int fb_width, fb_height;
/* No fb means shut it down */
if (!fb) {
plane->old_fb = plane->fb;
ret = plane->funcs->disable_plane(plane);
if (!ret) {
plane->crtc = NULL;
plane->fb = NULL;
} else {
plane->old_fb = NULL;
}
goto out;
}
/* Check whether this plane is usable on this CRTC */
if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
DRM_DEBUG_KMS("Invalid crtc for plane\n");
ret = -EINVAL;
goto out;
}
/* Check whether this plane supports the fb pixel format. */
ret = drm_plane_check_pixel_format(plane, fb->pixel_format);
if (ret) {
DRM_DEBUG_KMS("Invalid pixel format %s\n",
drm_get_format_name(fb->pixel_format));
goto out;
}
/* Give drivers some help against integer overflows */
if (crtc_w > INT_MAX ||
crtc_x > INT_MAX - (int32_t) crtc_w ||
crtc_h > INT_MAX ||
crtc_y > INT_MAX - (int32_t) crtc_h) {
DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
crtc_w, crtc_h, crtc_x, crtc_y);
return -ERANGE;
}
fb_width = fb->width << 16;
fb_height = fb->height << 16;
/* Make sure source coordinates are inside the fb. */
if (src_w > fb_width ||
src_x > fb_width - src_w ||
src_h > fb_height ||
src_y > fb_height - src_h) {
DRM_DEBUG_KMS("Invalid source coordinates "
"%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
src_w >> 16, ((src_w & 0xffff) * 15625) >> 10,
src_h >> 16, ((src_h & 0xffff) * 15625) >> 10,
src_x >> 16, ((src_x & 0xffff) * 15625) >> 10,
src_y >> 16, ((src_y & 0xffff) * 15625) >> 10);
ret = -ENOSPC;
goto out;
}
plane->old_fb = plane->fb;
ret = plane->funcs->update_plane(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
if (!ret) {
plane->crtc = crtc;
plane->fb = fb;
fb = NULL;
} else {
plane->old_fb = NULL;
}
out:
if (fb)
drm_framebuffer_unreference(fb);
if (plane->old_fb)
drm_framebuffer_unreference(plane->old_fb);
plane->old_fb = NULL;
return ret;
}
static int setplane_internal(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
/* src_{x,y,w,h} values are 16.16 fixed point */
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
int ret;
drm_modeset_lock_all(plane->dev);
ret = __setplane_internal(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
drm_modeset_unlock_all(plane->dev);
return ret;
}
/**
* drm_mode_setplane - configure a plane's configuration
* @dev: DRM device
* @data: ioctl data*
* @file_priv: DRM file info
*
* Set plane configuration, including placement, fb, scaling, and other factors.
* Or pass a NULL fb to disable (planes may be disabled without providing a
* valid crtc).
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_setplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_set_plane *plane_req = data;
struct drm_plane *plane;
struct drm_crtc *crtc = NULL;
struct drm_framebuffer *fb = NULL;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
/*
* First, find the plane, crtc, and fb objects. If not available,
* we don't bother to call the driver.
*/
plane = drm_plane_find(dev, plane_req->plane_id);
if (!plane) {
DRM_DEBUG_KMS("Unknown plane ID %d\n",
plane_req->plane_id);
return -ENOENT;
}
if (plane_req->fb_id) {
fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
plane_req->fb_id);
return -ENOENT;
}
crtc = drm_crtc_find(dev, plane_req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown crtc ID %d\n",
plane_req->crtc_id);
return -ENOENT;
}
}
/*
* setplane_internal will take care of deref'ing either the old or new
* framebuffer depending on success.
*/
return setplane_internal(plane, crtc, fb,
plane_req->crtc_x, plane_req->crtc_y,
plane_req->crtc_w, plane_req->crtc_h,
plane_req->src_x, plane_req->src_y,
plane_req->src_w, plane_req->src_h);
}
/**
* drm_mode_set_config_internal - helper to call ->set_config
* @set: modeset config to set
*
* This is a little helper to wrap internal calls to the ->set_config driver
* interface. The only thing it adds is correct refcounting dance.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_set_config_internal(struct drm_mode_set *set)
{
struct drm_crtc *crtc = set->crtc;
struct drm_framebuffer *fb;
struct drm_crtc *tmp;
int ret;
/*
* NOTE: ->set_config can also disable other crtcs (if we steal all
* connectors from it), hence we need to refcount the fbs across all
* crtcs. Atomic modeset will have saner semantics ...
*/
drm_for_each_crtc(tmp, crtc->dev)
tmp->primary->old_fb = tmp->primary->fb;
fb = set->fb;
ret = crtc->funcs->set_config(set);
if (ret == 0) {
crtc->primary->crtc = crtc;
crtc->primary->fb = fb;
}
drm_for_each_crtc(tmp, crtc->dev) {
if (tmp->primary->fb)
drm_framebuffer_reference(tmp->primary->fb);
if (tmp->primary->old_fb)
drm_framebuffer_unreference(tmp->primary->old_fb);
tmp->primary->old_fb = NULL;
}
return ret;
}
EXPORT_SYMBOL(drm_mode_set_config_internal);
/**
* drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
* @mode: mode to query
* @hdisplay: hdisplay value to fill in
* @vdisplay: vdisplay value to fill in
*
* The vdisplay value will be doubled if the specified mode is a stereo mode of
* the appropriate layout.
*/
void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
int *hdisplay, int *vdisplay)
{
struct drm_display_mode adjusted;
drm_mode_copy(&adjusted, mode);
drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
*hdisplay = adjusted.crtc_hdisplay;
*vdisplay = adjusted.crtc_vdisplay;
}
EXPORT_SYMBOL(drm_crtc_get_hv_timing);
/**
* drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
* CRTC viewport
* @crtc: CRTC that framebuffer will be displayed on
* @x: x panning
* @y: y panning
* @mode: mode that framebuffer will be displayed under
* @fb: framebuffer to check size of
*/
int drm_crtc_check_viewport(const struct drm_crtc *crtc,
int x, int y,
const struct drm_display_mode *mode,
const struct drm_framebuffer *fb)
{
int hdisplay, vdisplay;
drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
if (crtc->invert_dimensions)
swap(hdisplay, vdisplay);
if (hdisplay > fb->width ||
vdisplay > fb->height ||
x > fb->width - hdisplay ||
y > fb->height - vdisplay) {
DRM_DEBUG_KMS("Invalid fb size %ux%u for CRTC viewport %ux%u+%d+%d%s.\n",
fb->width, fb->height, hdisplay, vdisplay, x, y,
crtc->invert_dimensions ? " (inverted)" : "");
return -ENOSPC;
}
return 0;
}
EXPORT_SYMBOL(drm_crtc_check_viewport);
/**
* drm_mode_setcrtc - set CRTC configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Build a new CRTC configuration based on user request.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_setcrtc(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_config *config = &dev->mode_config;
struct drm_mode_crtc *crtc_req = data;
struct drm_crtc *crtc;
struct drm_connector **connector_set = NULL, *connector;
struct drm_framebuffer *fb = NULL;
struct drm_display_mode *mode = NULL;
struct drm_mode_set set;
uint32_t __user *set_connectors_ptr;
int ret;
int i;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
/*
* Universal plane src offsets are only 16.16, prevent havoc for
* drivers using universal plane code internally.
*/
if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
return -ERANGE;
drm_modeset_lock_all(dev);
crtc = drm_crtc_find(dev, crtc_req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
ret = -ENOENT;
goto out;
}
DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
if (crtc_req->mode_valid) {
/* If we have a mode we need a framebuffer. */
/* If we pass -1, set the mode with the currently bound fb */
if (crtc_req->fb_id == -1) {
if (!crtc->primary->fb) {
DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
ret = -EINVAL;
goto out;
}
fb = crtc->primary->fb;
/* Make refcounting symmetric with the lookup path. */
drm_framebuffer_reference(fb);
} else {
fb = drm_framebuffer_lookup(dev, crtc_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown FB ID%d\n",
crtc_req->fb_id);
ret = -ENOENT;
goto out;
}
}
mode = drm_mode_create(dev);
if (!mode) {
ret = -ENOMEM;
goto out;
}
ret = drm_mode_convert_umode(mode, &crtc_req->mode);
if (ret) {
DRM_DEBUG_KMS("Invalid mode\n");
goto out;
}
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
/*
* Check whether the primary plane supports the fb pixel format.
* Drivers not implementing the universal planes API use a
* default formats list provided by the DRM core which doesn't
* match real hardware capabilities. Skip the check in that
* case.
*/
if (!crtc->primary->format_default) {
ret = drm_plane_check_pixel_format(crtc->primary,
fb->pixel_format);
if (ret) {
DRM_DEBUG_KMS("Invalid pixel format %s\n",
drm_get_format_name(fb->pixel_format));
goto out;
}
}
ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
mode, fb);
if (ret)
goto out;
}
if (crtc_req->count_connectors == 0 && mode) {
DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
ret = -EINVAL;
goto out;
}
if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
crtc_req->count_connectors);
ret = -EINVAL;
goto out;
}
if (crtc_req->count_connectors > 0) {
u32 out_id;
/* Avoid unbounded kernel memory allocation */
if (crtc_req->count_connectors > config->num_connector) {
ret = -EINVAL;
goto out;
}
connector_set = kmalloc_array(crtc_req->count_connectors,
sizeof(struct drm_connector *),
GFP_KERNEL);
if (!connector_set) {
ret = -ENOMEM;
goto out;
}
for (i = 0; i < crtc_req->count_connectors; i++) {
set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
if (get_user(out_id, &set_connectors_ptr[i])) {
ret = -EFAULT;
goto out;
}
connector = drm_connector_find(dev, out_id);
if (!connector) {
DRM_DEBUG_KMS("Connector id %d unknown\n",
out_id);
ret = -ENOENT;
goto out;
}
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
connector_set[i] = connector;
}
}
set.crtc = crtc;
set.x = crtc_req->x;
set.y = crtc_req->y;
set.mode = mode;
set.connectors = connector_set;
set.num_connectors = crtc_req->count_connectors;
set.fb = fb;
ret = drm_mode_set_config_internal(&set);
out:
if (fb)
drm_framebuffer_unreference(fb);
kfree(connector_set);
drm_mode_destroy(dev, mode);
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_mode_cursor_universal - translate legacy cursor ioctl call into a
* universal plane handler call
* @crtc: crtc to update cursor for
* @req: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Legacy cursor ioctl's work directly with driver buffer handles. To
* translate legacy ioctl calls into universal plane handler calls, we need to
* wrap the native buffer handle in a drm_framebuffer.
*
* Note that we assume any handle passed to the legacy ioctls was a 32-bit ARGB
* buffer with a pitch of 4*width; the universal plane interface should be used
* directly in cases where the hardware can support other buffer settings and
* userspace wants to make use of these capabilities.
*
* Returns:
* Zero on success, negative errno on failure.
*/
static int drm_mode_cursor_universal(struct drm_crtc *crtc,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv)
{
struct drm_device *dev = crtc->dev;
struct drm_framebuffer *fb = NULL;
struct drm_mode_fb_cmd2 fbreq = {
.width = req->width,
.height = req->height,
.pixel_format = DRM_FORMAT_ARGB8888,
.pitches = { req->width * 4 },
.handles = { req->handle },
};
int32_t crtc_x, crtc_y;
uint32_t crtc_w = 0, crtc_h = 0;
uint32_t src_w = 0, src_h = 0;
int ret = 0;
BUG_ON(!crtc->cursor);
WARN_ON(crtc->cursor->crtc != crtc && crtc->cursor->crtc != NULL);
/*
* Obtain fb we'll be using (either new or existing) and take an extra
* reference to it if fb != null. setplane will take care of dropping
* the reference if the plane update fails.
*/
if (req->flags & DRM_MODE_CURSOR_BO) {
if (req->handle) {
fb = internal_framebuffer_create(dev, &fbreq, file_priv);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n");
return PTR_ERR(fb);
}
} else {
fb = NULL;
}
} else {
fb = crtc->cursor->fb;
if (fb)
drm_framebuffer_reference(fb);
}
if (req->flags & DRM_MODE_CURSOR_MOVE) {
crtc_x = req->x;
crtc_y = req->y;
} else {
crtc_x = crtc->cursor_x;
crtc_y = crtc->cursor_y;
}
if (fb) {
crtc_w = fb->width;
crtc_h = fb->height;
src_w = fb->width << 16;
src_h = fb->height << 16;
}
/*
* setplane_internal will take care of deref'ing either the old or new
* framebuffer depending on success.
*/
ret = __setplane_internal(crtc->cursor, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
0, 0, src_w, src_h);
/* Update successful; save new cursor position, if necessary */
if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) {
crtc->cursor_x = req->x;
crtc->cursor_y = req->y;
}
return ret;
}
static int drm_mode_cursor_common(struct drm_device *dev,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv)
{
struct drm_crtc *crtc;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
return -EINVAL;
crtc = drm_crtc_find(dev, req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id);
return -ENOENT;
}
/*
* If this crtc has a universal cursor plane, call that plane's update
* handler rather than using legacy cursor handlers.
*/
drm_modeset_lock_crtc(crtc, crtc->cursor);
if (crtc->cursor) {
ret = drm_mode_cursor_universal(crtc, req, file_priv);
goto out;
}
if (req->flags & DRM_MODE_CURSOR_BO) {
if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) {
ret = -ENXIO;
goto out;
}
/* Turns off the cursor if handle is 0 */
if (crtc->funcs->cursor_set2)
ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle,
req->width, req->height, req->hot_x, req->hot_y);
else
ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
req->width, req->height);
}
if (req->flags & DRM_MODE_CURSOR_MOVE) {
if (crtc->funcs->cursor_move) {
ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
} else {
ret = -EFAULT;
goto out;
}
}
out:
drm_modeset_unlock_crtc(crtc);
return ret;
}
/**
* drm_mode_cursor_ioctl - set CRTC's cursor configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Set the cursor configuration based on user request.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_cursor_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_cursor *req = data;
struct drm_mode_cursor2 new_req;
memcpy(&new_req, req, sizeof(struct drm_mode_cursor));
new_req.hot_x = new_req.hot_y = 0;
return drm_mode_cursor_common(dev, &new_req, file_priv);
}
/**
* drm_mode_cursor2_ioctl - set CRTC's cursor configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Set the cursor configuration based on user request. This implements the 2nd
* version of the cursor ioctl, which allows userspace to additionally specify
* the hotspot of the pointer.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_cursor2_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_cursor2 *req = data;
return drm_mode_cursor_common(dev, req, file_priv);
}
/**
* drm_mode_legacy_fb_format - compute drm fourcc code from legacy description
* @bpp: bits per pixels
* @depth: bit depth per pixel
*
* Computes a drm fourcc pixel format code for the given @bpp/@depth values.
* Useful in fbdev emulation code, since that deals in those values.
*/
uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth)
{
uint32_t fmt;
switch (bpp) {
case 8:
fmt = DRM_FORMAT_C8;
break;
case 16:
if (depth == 15)
fmt = DRM_FORMAT_XRGB1555;
else
fmt = DRM_FORMAT_RGB565;
break;
case 24:
fmt = DRM_FORMAT_RGB888;
break;
case 32:
if (depth == 24)
fmt = DRM_FORMAT_XRGB8888;
else if (depth == 30)
fmt = DRM_FORMAT_XRGB2101010;
else
fmt = DRM_FORMAT_ARGB8888;
break;
default:
DRM_ERROR("bad bpp, assuming x8r8g8b8 pixel format\n");
fmt = DRM_FORMAT_XRGB8888;
break;
}
return fmt;
}
EXPORT_SYMBOL(drm_mode_legacy_fb_format);
/**
* drm_mode_addfb - add an FB to the graphics configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Add a new FB to the specified CRTC, given a user request. This is the
* original addfb ioctl which only supported RGB formats.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_addfb(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_fb_cmd *or = data;
struct drm_mode_fb_cmd2 r = {};
int ret;
/* convert to new format and call new ioctl */
r.fb_id = or->fb_id;
r.width = or->width;
r.height = or->height;
r.pitches[0] = or->pitch;
r.pixel_format = drm_mode_legacy_fb_format(or->bpp, or->depth);
r.handles[0] = or->handle;
ret = drm_mode_addfb2(dev, &r, file_priv);
if (ret)
return ret;
or->fb_id = r.fb_id;
return 0;
}
static int format_check(const struct drm_mode_fb_cmd2 *r)
{
uint32_t format = r->pixel_format & ~DRM_FORMAT_BIG_ENDIAN;
switch (format) {
case DRM_FORMAT_C8:
case DRM_FORMAT_RGB332:
case DRM_FORMAT_BGR233:
case DRM_FORMAT_XRGB4444:
case DRM_FORMAT_XBGR4444:
case DRM_FORMAT_RGBX4444:
case DRM_FORMAT_BGRX4444:
case DRM_FORMAT_ARGB4444:
case DRM_FORMAT_ABGR4444:
case DRM_FORMAT_RGBA4444:
case DRM_FORMAT_BGRA4444:
case DRM_FORMAT_XRGB1555:
case DRM_FORMAT_XBGR1555:
case DRM_FORMAT_RGBX5551:
case DRM_FORMAT_BGRX5551:
case DRM_FORMAT_ARGB1555:
case DRM_FORMAT_ABGR1555:
case DRM_FORMAT_RGBA5551:
case DRM_FORMAT_BGRA5551:
case DRM_FORMAT_RGB565:
case DRM_FORMAT_BGR565:
case DRM_FORMAT_RGB888:
case DRM_FORMAT_BGR888:
case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_RGBX8888:
case DRM_FORMAT_BGRX8888:
case DRM_FORMAT_ARGB8888:
case DRM_FORMAT_ABGR8888:
case DRM_FORMAT_RGBA8888:
case DRM_FORMAT_BGRA8888:
case DRM_FORMAT_XRGB2101010:
case DRM_FORMAT_XBGR2101010:
case DRM_FORMAT_RGBX1010102:
case DRM_FORMAT_BGRX1010102:
case DRM_FORMAT_ARGB2101010:
case DRM_FORMAT_ABGR2101010:
case DRM_FORMAT_RGBA1010102:
case DRM_FORMAT_BGRA1010102:
case DRM_FORMAT_YUYV:
case DRM_FORMAT_YVYU:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_VYUY:
case DRM_FORMAT_AYUV:
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV21:
case DRM_FORMAT_NV16:
case DRM_FORMAT_NV61:
case DRM_FORMAT_NV24:
case DRM_FORMAT_NV42:
case DRM_FORMAT_YUV410:
case DRM_FORMAT_YVU410:
case DRM_FORMAT_YUV411:
case DRM_FORMAT_YVU411:
case DRM_FORMAT_YUV420:
case DRM_FORMAT_YVU420:
case DRM_FORMAT_YUV422:
case DRM_FORMAT_YVU422:
case DRM_FORMAT_YUV444:
case DRM_FORMAT_YVU444:
return 0;
default:
DRM_DEBUG_KMS("invalid pixel format %s\n",
drm_get_format_name(r->pixel_format));
return -EINVAL;
}
}
static int framebuffer_check(const struct drm_mode_fb_cmd2 *r)
{
int ret, hsub, vsub, num_planes, i;
ret = format_check(r);
if (ret) {
DRM_DEBUG_KMS("bad framebuffer format %s\n",
drm_get_format_name(r->pixel_format));
return ret;
}
hsub = drm_format_horz_chroma_subsampling(r->pixel_format);
vsub = drm_format_vert_chroma_subsampling(r->pixel_format);
num_planes = drm_format_num_planes(r->pixel_format);
if (r->width == 0 || r->width % hsub) {
DRM_DEBUG_KMS("bad framebuffer width %u\n", r->width);
return -EINVAL;
}
if (r->height == 0 || r->height % vsub) {
DRM_DEBUG_KMS("bad framebuffer height %u\n", r->height);
return -EINVAL;
}
for (i = 0; i < num_planes; i++) {
unsigned int width = r->width / (i != 0 ? hsub : 1);
unsigned int height = r->height / (i != 0 ? vsub : 1);
unsigned int cpp = drm_format_plane_cpp(r->pixel_format, i);
if (!r->handles[i]) {
DRM_DEBUG_KMS("no buffer object handle for plane %d\n", i);
return -EINVAL;
}
if ((uint64_t) width * cpp > UINT_MAX)
return -ERANGE;
if ((uint64_t) height * r->pitches[i] + r->offsets[i] > UINT_MAX)
return -ERANGE;
if (r->pitches[i] < width * cpp) {
DRM_DEBUG_KMS("bad pitch %u for plane %d\n", r->pitches[i], i);
return -EINVAL;
}
if (r->modifier[i] && !(r->flags & DRM_MODE_FB_MODIFIERS)) {
DRM_DEBUG_KMS("bad fb modifier %llu for plane %d\n",
r->modifier[i], i);
return -EINVAL;
}
/* modifier specific checks: */
switch (r->modifier[i]) {
case DRM_FORMAT_MOD_SAMSUNG_64_32_TILE:
/* NOTE: the pitch restriction may be lifted later if it turns
* out that no hw has this restriction:
*/
if (r->pixel_format != DRM_FORMAT_NV12 ||
width % 128 || height % 32 ||
r->pitches[i] % 128) {
DRM_DEBUG_KMS("bad modifier data for plane %d\n", i);
return -EINVAL;
}
break;
default:
break;
}
}
for (i = num_planes; i < 4; i++) {
if (r->modifier[i]) {
DRM_DEBUG_KMS("non-zero modifier for unused plane %d\n", i);
return -EINVAL;
}
/* Pre-FB_MODIFIERS userspace didn't clear the structs properly. */
if (!(r->flags & DRM_MODE_FB_MODIFIERS))
continue;
if (r->handles[i]) {
DRM_DEBUG_KMS("buffer object handle for unused plane %d\n", i);
return -EINVAL;
}
if (r->pitches[i]) {
DRM_DEBUG_KMS("non-zero pitch for unused plane %d\n", i);
return -EINVAL;
}
if (r->offsets[i]) {
DRM_DEBUG_KMS("non-zero offset for unused plane %d\n", i);
return -EINVAL;
}
}
return 0;
}
static struct drm_framebuffer *
internal_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd2 *r,
struct drm_file *file_priv)
{
struct drm_mode_config *config = &dev->mode_config;
struct drm_framebuffer *fb;
int ret;
if (r->flags & ~(DRM_MODE_FB_INTERLACED | DRM_MODE_FB_MODIFIERS)) {
DRM_DEBUG_KMS("bad framebuffer flags 0x%08x\n", r->flags);
return ERR_PTR(-EINVAL);
}
if ((config->min_width > r->width) || (r->width > config->max_width)) {
DRM_DEBUG_KMS("bad framebuffer width %d, should be >= %d && <= %d\n",
r->width, config->min_width, config->max_width);
return ERR_PTR(-EINVAL);
}
if ((config->min_height > r->height) || (r->height > config->max_height)) {
DRM_DEBUG_KMS("bad framebuffer height %d, should be >= %d && <= %d\n",
r->height, config->min_height, config->max_height);
return ERR_PTR(-EINVAL);
}
if (r->flags & DRM_MODE_FB_MODIFIERS &&
!dev->mode_config.allow_fb_modifiers) {
DRM_DEBUG_KMS("driver does not support fb modifiers\n");
return ERR_PTR(-EINVAL);
}
ret = framebuffer_check(r);
if (ret)
return ERR_PTR(ret);
fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
return fb;
}
return fb;
}
/**
* drm_mode_addfb2 - add an FB to the graphics configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Add a new FB to the specified CRTC, given a user request with format. This is
* the 2nd version of the addfb ioctl, which supports multi-planar framebuffers
* and uses fourcc codes as pixel format specifiers.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_addfb2(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_fb_cmd2 *r = data;
struct drm_framebuffer *fb;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
fb = internal_framebuffer_create(dev, r, file_priv);
if (IS_ERR(fb))
return PTR_ERR(fb);
/* Transfer ownership to the filp for reaping on close */
DRM_DEBUG_KMS("[FB:%d]\n", fb->base.id);
mutex_lock(&file_priv->fbs_lock);
r->fb_id = fb->base.id;
list_add(&fb->filp_head, &file_priv->fbs);
mutex_unlock(&file_priv->fbs_lock);
return 0;
}
/**
* drm_mode_rmfb - remove an FB from the configuration
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Remove the FB specified by the user.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_rmfb(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_framebuffer *fb = NULL;
struct drm_framebuffer *fbl = NULL;
uint32_t *id = data;
int found = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
mutex_lock(&file_priv->fbs_lock);
mutex_lock(&dev->mode_config.fb_lock);
fb = __drm_framebuffer_lookup(dev, *id);
if (!fb)
goto fail_lookup;
list_for_each_entry(fbl, &file_priv->fbs, filp_head)
if (fb == fbl)
found = 1;
if (!found)
goto fail_lookup;
list_del_init(&fb->filp_head);
mutex_unlock(&dev->mode_config.fb_lock);
mutex_unlock(&file_priv->fbs_lock);
drm_framebuffer_unreference(fb);
return 0;
fail_lookup:
mutex_unlock(&dev->mode_config.fb_lock);
mutex_unlock(&file_priv->fbs_lock);
return -ENOENT;
}
/**
* drm_mode_getfb - get FB info
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Lookup the FB given its ID and return info about it.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getfb(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_fb_cmd *r = data;
struct drm_framebuffer *fb;
int ret;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
fb = drm_framebuffer_lookup(dev, r->fb_id);
if (!fb)
return -ENOENT;
r->height = fb->height;
r->width = fb->width;
r->depth = fb->depth;
r->bpp = fb->bits_per_pixel;
r->pitch = fb->pitches[0];
if (fb->funcs->create_handle) {
if (file_priv->is_master || capable(CAP_SYS_ADMIN) ||
drm_is_control_client(file_priv)) {
ret = fb->funcs->create_handle(fb, file_priv,
&r->handle);
} else {
/* GET_FB() is an unprivileged ioctl so we must not
* return a buffer-handle to non-master processes! For
* backwards-compatibility reasons, we cannot make
* GET_FB() privileged, so just return an invalid handle
* for non-masters. */
r->handle = 0;
ret = 0;
}
} else {
ret = -ENODEV;
}
drm_framebuffer_unreference(fb);
return ret;
}
/**
* drm_mode_dirtyfb_ioctl - flush frontbuffer rendering on an FB
* @dev: drm device for the ioctl
* @data: data pointer for the ioctl
* @file_priv: drm file for the ioctl call
*
* Lookup the FB and flush out the damaged area supplied by userspace as a clip
* rectangle list. Generic userspace which does frontbuffer rendering must call
* this ioctl to flush out the changes on manual-update display outputs, e.g.
* usb display-link, mipi manual update panels or edp panel self refresh modes.
*
* Modesetting drivers which always update the frontbuffer do not need to
* implement the corresponding ->dirty framebuffer callback.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_clip_rect __user *clips_ptr;
struct drm_clip_rect *clips = NULL;
struct drm_mode_fb_dirty_cmd *r = data;
struct drm_framebuffer *fb;
unsigned flags;
int num_clips;
int ret;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
fb = drm_framebuffer_lookup(dev, r->fb_id);
if (!fb)
return -ENOENT;
num_clips = r->num_clips;
clips_ptr = (struct drm_clip_rect __user *)(unsigned long)r->clips_ptr;
if (!num_clips != !clips_ptr) {
ret = -EINVAL;
goto out_err1;
}
flags = DRM_MODE_FB_DIRTY_FLAGS & r->flags;
/* If userspace annotates copy, clips must come in pairs */
if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY && (num_clips % 2)) {
ret = -EINVAL;
goto out_err1;
}
if (num_clips && clips_ptr) {
if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) {
ret = -EINVAL;
goto out_err1;
}
clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL);
if (!clips) {
ret = -ENOMEM;
goto out_err1;
}
ret = copy_from_user(clips, clips_ptr,
num_clips * sizeof(*clips));
if (ret) {
ret = -EFAULT;
goto out_err2;
}
}
if (fb->funcs->dirty) {
ret = fb->funcs->dirty(fb, file_priv, flags, r->color,
clips, num_clips);
} else {
ret = -ENOSYS;
}
out_err2:
kfree(clips);
out_err1:
drm_framebuffer_unreference(fb);
return ret;
}
/**
* drm_fb_release - remove and free the FBs on this file
* @priv: drm file for the ioctl
*
* Destroy all the FBs associated with @filp.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
void drm_fb_release(struct drm_file *priv)
{
struct drm_framebuffer *fb, *tfb;
/*
* When the file gets released that means no one else can access the fb
* list any more, so no need to grab fpriv->fbs_lock. And we need to
* avoid upsetting lockdep since the universal cursor code adds a
* framebuffer while holding mutex locks.
*
* Note that a real deadlock between fpriv->fbs_lock and the modeset
* locks is impossible here since no one else but this function can get
* at it any more.
*/
list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) {
list_del_init(&fb->filp_head);
/* This drops the fpriv->fbs reference. */
drm_framebuffer_unreference(fb);
}
}
/**
* drm_property_create - create a new property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
* @num_values: number of pre-defined values
*
* This creates a new generic drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* Note that the DRM core keeps a per-device list of properties and that, if
* drm_mode_config_cleanup() is called, it will destroy all properties created
* by the driver.
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create(struct drm_device *dev, int flags,
const char *name, int num_values)
{
struct drm_property *property = NULL;
int ret;
property = kzalloc(sizeof(struct drm_property), GFP_KERNEL);
if (!property)
return NULL;
property->dev = dev;
if (num_values) {
property->values = kcalloc(num_values, sizeof(uint64_t),
GFP_KERNEL);
if (!property->values)
goto fail;
}
ret = drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY);
if (ret)
goto fail;
property->flags = flags;
property->num_values = num_values;
INIT_LIST_HEAD(&property->enum_list);
if (name) {
strncpy(property->name, name, DRM_PROP_NAME_LEN);
property->name[DRM_PROP_NAME_LEN-1] = '\0';
}
list_add_tail(&property->head, &dev->mode_config.property_list);
WARN_ON(!drm_property_type_valid(property));
return property;
fail:
kfree(property->values);
kfree(property);
return NULL;
}
EXPORT_SYMBOL(drm_property_create);
/**
* drm_property_create_enum - create a new enumeration property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
* @props: enumeration lists with property values
* @num_values: number of pre-defined values
*
* This creates a new generic drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* Userspace is only allowed to set one of the predefined values for enumeration
* properties.
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags,
const char *name,
const struct drm_prop_enum_list *props,
int num_values)
{
struct drm_property *property;
int i, ret;
flags |= DRM_MODE_PROP_ENUM;
property = drm_property_create(dev, flags, name, num_values);
if (!property)
return NULL;
for (i = 0; i < num_values; i++) {
ret = drm_property_add_enum(property, i,
props[i].type,
props[i].name);
if (ret) {
drm_property_destroy(dev, property);
return NULL;
}
}
return property;
}
EXPORT_SYMBOL(drm_property_create_enum);
/**
* drm_property_create_bitmask - create a new bitmask property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
* @props: enumeration lists with property bitflags
* @num_props: size of the @props array
* @supported_bits: bitmask of all supported enumeration values
*
* This creates a new bitmask drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* Compared to plain enumeration properties userspace is allowed to set any
* or'ed together combination of the predefined property bitflag values
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
int flags, const char *name,
const struct drm_prop_enum_list *props,
int num_props,
uint64_t supported_bits)
{
struct drm_property *property;
int i, ret, index = 0;
int num_values = hweight64(supported_bits);
flags |= DRM_MODE_PROP_BITMASK;
property = drm_property_create(dev, flags, name, num_values);
if (!property)
return NULL;
for (i = 0; i < num_props; i++) {
if (!(supported_bits & (1ULL << props[i].type)))
continue;
if (WARN_ON(index >= num_values)) {
drm_property_destroy(dev, property);
return NULL;
}
ret = drm_property_add_enum(property, index++,
props[i].type,
props[i].name);
if (ret) {
drm_property_destroy(dev, property);
return NULL;
}
}
return property;
}
EXPORT_SYMBOL(drm_property_create_bitmask);
static struct drm_property *property_create_range(struct drm_device *dev,
int flags, const char *name,
uint64_t min, uint64_t max)
{
struct drm_property *property;
property = drm_property_create(dev, flags, name, 2);
if (!property)
return NULL;
property->values[0] = min;
property->values[1] = max;
return property;
}
/**
* drm_property_create_range - create a new unsigned ranged property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
* @min: minimum value of the property
* @max: maximum value of the property
*
* This creates a new generic drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* Userspace is allowed to set any unsigned integer value in the (min, max)
* range inclusive.
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
const char *name,
uint64_t min, uint64_t max)
{
return property_create_range(dev, DRM_MODE_PROP_RANGE | flags,
name, min, max);
}
EXPORT_SYMBOL(drm_property_create_range);
/**
* drm_property_create_signed_range - create a new signed ranged property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
* @min: minimum value of the property
* @max: maximum value of the property
*
* This creates a new generic drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* Userspace is allowed to set any signed integer value in the (min, max)
* range inclusive.
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create_signed_range(struct drm_device *dev,
int flags, const char *name,
int64_t min, int64_t max)
{
return property_create_range(dev, DRM_MODE_PROP_SIGNED_RANGE | flags,
name, I642U64(min), I642U64(max));
}
EXPORT_SYMBOL(drm_property_create_signed_range);
/**
* drm_property_create_object - create a new object property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
* @type: object type from DRM_MODE_OBJECT_* defines
*
* This creates a new generic drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* Userspace is only allowed to set this to any property value of the given
* @type. Only useful for atomic properties, which is enforced.
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create_object(struct drm_device *dev,
int flags, const char *name, uint32_t type)
{
struct drm_property *property;
flags |= DRM_MODE_PROP_OBJECT;
if (WARN_ON(!(flags & DRM_MODE_PROP_ATOMIC)))
return NULL;
property = drm_property_create(dev, flags, name, 1);
if (!property)
return NULL;
property->values[0] = type;
return property;
}
EXPORT_SYMBOL(drm_property_create_object);
/**
* drm_property_create_bool - create a new boolean property type
* @dev: drm device
* @flags: flags specifying the property type
* @name: name of the property
*
* This creates a new generic drm property which can then be attached to a drm
* object with drm_object_attach_property. The returned property object must be
* freed with drm_property_destroy.
*
* This is implemented as a ranged property with only {0, 1} as valid values.
*
* Returns:
* A pointer to the newly created property on success, NULL on failure.
*/
struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags,
const char *name)
{
return drm_property_create_range(dev, flags, name, 0, 1);
}
EXPORT_SYMBOL(drm_property_create_bool);
/**
* drm_property_add_enum - add a possible value to an enumeration property
* @property: enumeration property to change
* @index: index of the new enumeration
* @value: value of the new enumeration
* @name: symbolic name of the new enumeration
*
* This functions adds enumerations to a property.
*
* It's use is deprecated, drivers should use one of the more specific helpers
* to directly create the property with all enumerations already attached.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_property_add_enum(struct drm_property *property, int index,
uint64_t value, const char *name)
{
struct drm_property_enum *prop_enum;
if (!(drm_property_type_is(property, DRM_MODE_PROP_ENUM) ||
drm_property_type_is(property, DRM_MODE_PROP_BITMASK)))
return -EINVAL;
/*
* Bitmask enum properties have the additional constraint of values
* from 0 to 63
*/
if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK) &&
(value > 63))
return -EINVAL;
if (!list_empty(&property->enum_list)) {
list_for_each_entry(prop_enum, &property->enum_list, head) {
if (prop_enum->value == value) {
strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
return 0;
}
}
}
prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL);
if (!prop_enum)
return -ENOMEM;
strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
prop_enum->value = value;
property->values[index] = value;
list_add_tail(&prop_enum->head, &property->enum_list);
return 0;
}
EXPORT_SYMBOL(drm_property_add_enum);
/**
* drm_property_destroy - destroy a drm property
* @dev: drm device
* @property: property to destry
*
* This function frees a property including any attached resources like
* enumeration values.
*/
void drm_property_destroy(struct drm_device *dev, struct drm_property *property)
{
struct drm_property_enum *prop_enum, *pt;
list_for_each_entry_safe(prop_enum, pt, &property->enum_list, head) {
list_del(&prop_enum->head);
kfree(prop_enum);
}
if (property->num_values)
kfree(property->values);
drm_mode_object_put(dev, &property->base);
list_del(&property->head);
kfree(property);
}
EXPORT_SYMBOL(drm_property_destroy);
/**
* drm_object_attach_property - attach a property to a modeset object
* @obj: drm modeset object
* @property: property to attach
* @init_val: initial value of the property
*
* This attaches the given property to the modeset object with the given initial
* value. Currently this function cannot fail since the properties are stored in
* a statically sized array.
*/
void drm_object_attach_property(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t init_val)
{
int count = obj->properties->count;
if (count == DRM_OBJECT_MAX_PROPERTY) {
WARN(1, "Failed to attach object property (type: 0x%x). Please "
"increase DRM_OBJECT_MAX_PROPERTY by 1 for each time "
"you see this message on the same object type.\n",
obj->type);
return;
}
obj->properties->properties[count] = property;
obj->properties->values[count] = init_val;
obj->properties->count++;
if (property->flags & DRM_MODE_PROP_ATOMIC)
obj->properties->atomic_count++;
}
EXPORT_SYMBOL(drm_object_attach_property);
/**
* drm_object_property_set_value - set the value of a property
* @obj: drm mode object to set property value for
* @property: property to set
* @val: value the property should be set to
*
* This functions sets a given property on a given object. This function only
* changes the software state of the property, it does not call into the
* driver's ->set_property callback.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_object_property_set_value(struct drm_mode_object *obj,
struct drm_property *property, uint64_t val)
{
int i;
for (i = 0; i < obj->properties->count; i++) {
if (obj->properties->properties[i] == property) {
obj->properties->values[i] = val;
return 0;
}
}
return -EINVAL;
}
EXPORT_SYMBOL(drm_object_property_set_value);
/**
* drm_object_property_get_value - retrieve the value of a property
* @obj: drm mode object to get property value from
* @property: property to retrieve
* @val: storage for the property value
*
* This function retrieves the softare state of the given property for the given
* property. Since there is no driver callback to retrieve the current property
* value this might be out of sync with the hardware, depending upon the driver
* and property.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_object_property_get_value(struct drm_mode_object *obj,
struct drm_property *property, uint64_t *val)
{
int i;
/* read-only properties bypass atomic mechanism and still store
* their value in obj->properties->values[].. mostly to avoid
* having to deal w/ EDID and similar props in atomic paths:
*/
if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) &&
!(property->flags & DRM_MODE_PROP_IMMUTABLE))
return drm_atomic_get_property(obj, property, val);
for (i = 0; i < obj->properties->count; i++) {
if (obj->properties->properties[i] == property) {
*val = obj->properties->values[i];
return 0;
}
}
return -EINVAL;
}
EXPORT_SYMBOL(drm_object_property_get_value);
/**
* drm_mode_getproperty_ioctl - get the property metadata
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function retrieves the metadata for a given property, like the different
* possible values for an enum property or the limits for a range property.
*
* Blob properties are special
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getproperty_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_get_property *out_resp = data;
struct drm_property *property;
int enum_count = 0;
int value_count = 0;
int ret = 0, i;
int copied;
struct drm_property_enum *prop_enum;
struct drm_mode_property_enum __user *enum_ptr;
uint64_t __user *values_ptr;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
property = drm_property_find(dev, out_resp->prop_id);
if (!property) {
ret = -ENOENT;
goto done;
}
if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) ||
drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) {
list_for_each_entry(prop_enum, &property->enum_list, head)
enum_count++;
}
value_count = property->num_values;
strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN);
out_resp->name[DRM_PROP_NAME_LEN-1] = 0;
out_resp->flags = property->flags;
if ((out_resp->count_values >= value_count) && value_count) {
values_ptr = (uint64_t __user *)(unsigned long)out_resp->values_ptr;
for (i = 0; i < value_count; i++) {
if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) {
ret = -EFAULT;
goto done;
}
}
}
out_resp->count_values = value_count;
if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) ||
drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) {
if ((out_resp->count_enum_blobs >= enum_count) && enum_count) {
copied = 0;
enum_ptr = (struct drm_mode_property_enum __user *)(unsigned long)out_resp->enum_blob_ptr;
list_for_each_entry(prop_enum, &property->enum_list, head) {
if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) {
ret = -EFAULT;
goto done;
}
if (copy_to_user(&enum_ptr[copied].name,
&prop_enum->name, DRM_PROP_NAME_LEN)) {
ret = -EFAULT;
goto done;
}
copied++;
}
}
out_resp->count_enum_blobs = enum_count;
}
/*
* NOTE: The idea seems to have been to use this to read all the blob
* property values. But nothing ever added them to the corresponding
* list, userspace always used the special-purpose get_blob ioctl to
* read the value for a blob property. It also doesn't make a lot of
* sense to return values here when everything else is just metadata for
* the property itself.
*/
if (drm_property_type_is(property, DRM_MODE_PROP_BLOB))
out_resp->count_enum_blobs = 0;
done:
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_property_create_blob - Create new blob property
*
* Creates a new blob property for a specified DRM device, optionally
* copying data.
*
* @dev: DRM device to create property for
* @length: Length to allocate for blob data
* @data: If specified, copies data into blob
*
* Returns:
* New blob property with a single reference on success, or an ERR_PTR
* value on failure.
*/
struct drm_property_blob *
drm_property_create_blob(struct drm_device *dev, size_t length,
const void *data)
{
struct drm_property_blob *blob;
int ret;
if (!length)
return ERR_PTR(-EINVAL);
blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL);
if (!blob)
return ERR_PTR(-ENOMEM);
/* This must be explicitly initialised, so we can safely call list_del
* on it in the removal handler, even if it isn't in a file list. */
INIT_LIST_HEAD(&blob->head_file);
blob->length = length;
blob->dev = dev;
if (data)
memcpy(blob->data, data, length);
mutex_lock(&dev->mode_config.blob_lock);
ret = drm_mode_object_get(dev, &blob->base, DRM_MODE_OBJECT_BLOB);
if (ret) {
kfree(blob);
mutex_unlock(&dev->mode_config.blob_lock);
return ERR_PTR(-EINVAL);
}
kref_init(&blob->refcount);
list_add_tail(&blob->head_global,
&dev->mode_config.property_blob_list);
mutex_unlock(&dev->mode_config.blob_lock);
return blob;
}
EXPORT_SYMBOL(drm_property_create_blob);
/**
* drm_property_free_blob - Blob property destructor
*
* Internal free function for blob properties; must not be used directly.
*
* @kref: Reference
*/
static void drm_property_free_blob(struct kref *kref)
{
struct drm_property_blob *blob =
container_of(kref, struct drm_property_blob, refcount);
WARN_ON(!mutex_is_locked(&blob->dev->mode_config.blob_lock));
list_del(&blob->head_global);
list_del(&blob->head_file);
drm_mode_object_put(blob->dev, &blob->base);
kfree(blob);
}
/**
* drm_property_unreference_blob - Unreference a blob property
*
* Drop a reference on a blob property. May free the object.
*
* @blob: Pointer to blob property
*/
void drm_property_unreference_blob(struct drm_property_blob *blob)
{
struct drm_device *dev;
if (!blob)
return;
dev = blob->dev;
DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount));
if (kref_put_mutex(&blob->refcount, drm_property_free_blob,
&dev->mode_config.blob_lock))
mutex_unlock(&dev->mode_config.blob_lock);
else
might_lock(&dev->mode_config.blob_lock);
}
EXPORT_SYMBOL(drm_property_unreference_blob);
/**
* drm_property_unreference_blob_locked - Unreference a blob property with blob_lock held
*
* Drop a reference on a blob property. May free the object. This must be
* called with blob_lock held.
*
* @blob: Pointer to blob property
*/
static void drm_property_unreference_blob_locked(struct drm_property_blob *blob)
{
if (!blob)
return;
DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount));
kref_put(&blob->refcount, drm_property_free_blob);
}
/**
* drm_property_destroy_user_blobs - destroy all blobs created by this client
* @dev: DRM device
* @file_priv: destroy all blobs owned by this file handle
*/
void drm_property_destroy_user_blobs(struct drm_device *dev,
struct drm_file *file_priv)
{
struct drm_property_blob *blob, *bt;
mutex_lock(&dev->mode_config.blob_lock);
list_for_each_entry_safe(blob, bt, &file_priv->blobs, head_file) {
list_del_init(&blob->head_file);
drm_property_unreference_blob_locked(blob);
}
mutex_unlock(&dev->mode_config.blob_lock);
}
/**
* drm_property_reference_blob - Take a reference on an existing property
*
* Take a new reference on an existing blob property.
*
* @blob: Pointer to blob property
*/
struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob)
{
DRM_DEBUG("%p: blob ID: %d (%d)\n", blob, blob->base.id, atomic_read(&blob->refcount.refcount));
kref_get(&blob->refcount);
return blob;
}
EXPORT_SYMBOL(drm_property_reference_blob);
/*
* Like drm_property_lookup_blob, but does not return an additional reference.
* Must be called with blob_lock held.
*/
static struct drm_property_blob *__drm_property_lookup_blob(struct drm_device *dev,
uint32_t id)
{
struct drm_mode_object *obj = NULL;
struct drm_property_blob *blob;
WARN_ON(!mutex_is_locked(&dev->mode_config.blob_lock));
mutex_lock(&dev->mode_config.idr_mutex);
obj = idr_find(&dev->mode_config.crtc_idr, id);
if (!obj || (obj->type != DRM_MODE_OBJECT_BLOB) || (obj->id != id))
blob = NULL;
else
blob = obj_to_blob(obj);
mutex_unlock(&dev->mode_config.idr_mutex);
return blob;
}
/**
* drm_property_lookup_blob - look up a blob property and take a reference
* @dev: drm device
* @id: id of the blob property
*
* If successful, this takes an additional reference to the blob property.
* callers need to make sure to eventually unreference the returned property
* again, using @drm_property_unreference_blob.
*/
struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev,
uint32_t id)
{
struct drm_property_blob *blob;
mutex_lock(&dev->mode_config.blob_lock);
blob = __drm_property_lookup_blob(dev, id);
if (blob) {
if (!kref_get_unless_zero(&blob->refcount))
blob = NULL;
}
mutex_unlock(&dev->mode_config.blob_lock);
return blob;
}
EXPORT_SYMBOL(drm_property_lookup_blob);
/**
* drm_property_replace_global_blob - atomically replace existing blob property
* @dev: drm device
* @replace: location of blob property pointer to be replaced
* @length: length of data for new blob, or 0 for no data
* @data: content for new blob, or NULL for no data
* @obj_holds_id: optional object for property holding blob ID
* @prop_holds_id: optional property holding blob ID
* @return 0 on success or error on failure
*
* This function will atomically replace a global property in the blob list,
* optionally updating a property which holds the ID of that property. It is
* guaranteed to be atomic: no caller will be allowed to see intermediate
* results, and either the entire operation will succeed and clean up the
* previous property, or it will fail and the state will be unchanged.
*
* If length is 0 or data is NULL, no new blob will be created, and the holding
* property, if specified, will be set to 0.
*
* Access to the replace pointer is assumed to be protected by the caller, e.g.
* by holding the relevant modesetting object lock for its parent.
*
* For example, a drm_connector has a 'PATH' property, which contains the ID
* of a blob property with the value of the MST path information. Calling this
* function with replace pointing to the connector's path_blob_ptr, length and
* data set for the new path information, obj_holds_id set to the connector's
* base object, and prop_holds_id set to the path property name, will perform
* a completely atomic update. The access to path_blob_ptr is protected by the
* caller holding a lock on the connector.
*/
static int drm_property_replace_global_blob(struct drm_device *dev,
struct drm_property_blob **replace,
size_t length,
const void *data,
struct drm_mode_object *obj_holds_id,
struct drm_property *prop_holds_id)
{
struct drm_property_blob *new_blob = NULL;
struct drm_property_blob *old_blob = NULL;
int ret;
WARN_ON(replace == NULL);
old_blob = *replace;
if (length && data) {
new_blob = drm_property_create_blob(dev, length, data);
if (IS_ERR(new_blob))
return PTR_ERR(new_blob);
}
/* This does not need to be synchronised with blob_lock, as the
* get_properties ioctl locks all modesetting objects, and
* obj_holds_id must be locked before calling here, so we cannot
* have its value out of sync with the list membership modified
* below under blob_lock. */
if (obj_holds_id) {
ret = drm_object_property_set_value(obj_holds_id,
prop_holds_id,
new_blob ?
new_blob->base.id : 0);
if (ret != 0)
goto err_created;
}
drm_property_unreference_blob(old_blob);
*replace = new_blob;
return 0;
err_created:
drm_property_unreference_blob(new_blob);
return ret;
}
/**
* drm_mode_getblob_ioctl - get the contents of a blob property value
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function retrieves the contents of a blob property. The value stored in
* an object's blob property is just a normal modeset object id.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_getblob_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_get_blob *out_resp = data;
struct drm_property_blob *blob;
int ret = 0;
void __user *blob_ptr;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
mutex_lock(&dev->mode_config.blob_lock);
blob = __drm_property_lookup_blob(dev, out_resp->blob_id);
if (!blob) {
ret = -ENOENT;
goto done;
}
if (out_resp->length == blob->length) {
blob_ptr = (void __user *)(unsigned long)out_resp->data;
if (copy_to_user(blob_ptr, blob->data, blob->length)) {
ret = -EFAULT;
goto done;
}
}
out_resp->length = blob->length;
done:
mutex_unlock(&dev->mode_config.blob_lock);
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_mode_createblob_ioctl - create a new blob property
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function creates a new blob property with user-defined values. In order
* to give us sensible validation and checking when creating, rather than at
* every potential use, we also require a type to be provided upfront.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_createblob_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_create_blob *out_resp = data;
struct drm_property_blob *blob;
void __user *blob_ptr;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
blob = drm_property_create_blob(dev, out_resp->length, NULL);
if (IS_ERR(blob))
return PTR_ERR(blob);
blob_ptr = (void __user *)(unsigned long)out_resp->data;
if (copy_from_user(blob->data, blob_ptr, out_resp->length)) {
ret = -EFAULT;
goto out_blob;
}
/* Dropping the lock between create_blob and our access here is safe
* as only the same file_priv can remove the blob; at this point, it is
* not associated with any file_priv. */
mutex_lock(&dev->mode_config.blob_lock);
out_resp->blob_id = blob->base.id;
list_add_tail(&file_priv->blobs, &blob->head_file);
mutex_unlock(&dev->mode_config.blob_lock);
return 0;
out_blob:
drm_property_unreference_blob(blob);
return ret;
}
/**
* drm_mode_destroyblob_ioctl - destroy a user blob property
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Destroy an existing user-defined blob property.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_destroyblob_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_destroy_blob *out_resp = data;
struct drm_property_blob *blob = NULL, *bt;
bool found = false;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
mutex_lock(&dev->mode_config.blob_lock);
blob = __drm_property_lookup_blob(dev, out_resp->blob_id);
if (!blob) {
ret = -ENOENT;
goto err;
}
/* Ensure the property was actually created by this user. */
list_for_each_entry(bt, &file_priv->blobs, head_file) {
if (bt == blob) {
found = true;
break;
}
}
if (!found) {
ret = -EPERM;
goto err;
}
/* We must drop head_file here, because we may not be the last
* reference on the blob. */
list_del_init(&blob->head_file);
drm_property_unreference_blob_locked(blob);
mutex_unlock(&dev->mode_config.blob_lock);
return 0;
err:
mutex_unlock(&dev->mode_config.blob_lock);
return ret;
}
/**
* drm_mode_connector_set_path_property - set tile property on connector
* @connector: connector to set property on.
* @path: path to use for property; must not be NULL.
*
* This creates a property to expose to userspace to specify a
* connector path. This is mainly used for DisplayPort MST where
* connectors have a topology and we want to allow userspace to give
* them more meaningful names.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_connector_set_path_property(struct drm_connector *connector,
const char *path)
{
struct drm_device *dev = connector->dev;
int ret;
ret = drm_property_replace_global_blob(dev,
&connector->path_blob_ptr,
strlen(path) + 1,
path,
&connector->base,
dev->mode_config.path_property);
return ret;
}
EXPORT_SYMBOL(drm_mode_connector_set_path_property);
/**
* drm_mode_connector_set_tile_property - set tile property on connector
* @connector: connector to set property on.
*
* This looks up the tile information for a connector, and creates a
* property for userspace to parse if it exists. The property is of
* the form of 8 integers using ':' as a separator.
*
* Returns:
* Zero on success, errno on failure.
*/
int drm_mode_connector_set_tile_property(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
char tile[256];
int ret;
if (!connector->has_tile) {
ret = drm_property_replace_global_blob(dev,
&connector->tile_blob_ptr,
0,
NULL,
&connector->base,
dev->mode_config.tile_property);
return ret;
}
snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
connector->tile_group->id, connector->tile_is_single_monitor,
connector->num_h_tile, connector->num_v_tile,
connector->tile_h_loc, connector->tile_v_loc,
connector->tile_h_size, connector->tile_v_size);
ret = drm_property_replace_global_blob(dev,
&connector->tile_blob_ptr,
strlen(tile) + 1,
tile,
&connector->base,
dev->mode_config.tile_property);
return ret;
}
EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
/**
* drm_mode_connector_update_edid_property - update the edid property of a connector
* @connector: drm connector
* @edid: new value of the edid property
*
* This function creates a new blob modeset object and assigns its id to the
* connector's edid property.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_connector_update_edid_property(struct drm_connector *connector,
const struct edid *edid)
{
struct drm_device *dev = connector->dev;
size_t size = 0;
int ret;
/* ignore requests to set edid when overridden */
if (connector->override_edid)
return 0;
if (edid)
size = EDID_LENGTH * (1 + edid->extensions);
ret = drm_property_replace_global_blob(dev,
&connector->edid_blob_ptr,
size,
edid,
&connector->base,
dev->mode_config.edid_property);
return ret;
}
EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
/* Some properties could refer to dynamic refcnt'd objects, or things that
* need special locking to handle lifetime issues (ie. to ensure the prop
* value doesn't become invalid part way through the property update due to
* race). The value returned by reference via 'obj' should be passed back
* to drm_property_change_valid_put() after the property is set (and the
* object to which the property is attached has a chance to take it's own
* reference).
*/
bool drm_property_change_valid_get(struct drm_property *property,
uint64_t value, struct drm_mode_object **ref)
{
int i;
if (property->flags & DRM_MODE_PROP_IMMUTABLE)
return false;
*ref = NULL;
if (drm_property_type_is(property, DRM_MODE_PROP_RANGE)) {
if (value < property->values[0] || value > property->values[1])
return false;
return true;
} else if (drm_property_type_is(property, DRM_MODE_PROP_SIGNED_RANGE)) {
int64_t svalue = U642I64(value);
if (svalue < U642I64(property->values[0]) ||
svalue > U642I64(property->values[1]))
return false;
return true;
} else if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) {
uint64_t valid_mask = 0;
for (i = 0; i < property->num_values; i++)
valid_mask |= (1ULL << property->values[i]);
return !(value & ~valid_mask);
} else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) {
struct drm_property_blob *blob;
if (value == 0)
return true;
blob = drm_property_lookup_blob(property->dev, value);
if (blob) {
*ref = &blob->base;
return true;
} else {
return false;
}
} else if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) {
/* a zero value for an object property translates to null: */
if (value == 0)
return true;
/* handle refcnt'd objects specially: */
if (property->values[0] == DRM_MODE_OBJECT_FB) {
struct drm_framebuffer *fb;
fb = drm_framebuffer_lookup(property->dev, value);
if (fb) {
*ref = &fb->base;
return true;
} else {
return false;
}
} else {
return _object_find(property->dev, value, property->values[0]) != NULL;
}
}
for (i = 0; i < property->num_values; i++)
if (property->values[i] == value)
return true;
return false;
}
void drm_property_change_valid_put(struct drm_property *property,
struct drm_mode_object *ref)
{
if (!ref)
return;
if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) {
if (property->values[0] == DRM_MODE_OBJECT_FB)
drm_framebuffer_unreference(obj_to_fb(ref));
} else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB))
drm_property_unreference_blob(obj_to_blob(ref));
}
/**
* drm_mode_connector_property_set_ioctl - set the current value of a connector property
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function sets the current value for a connectors's property. It also
* calls into a driver's ->set_property callback to update the hardware state
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_connector_set_property *conn_set_prop = data;
struct drm_mode_obj_set_property obj_set_prop = {
.value = conn_set_prop->value,
.prop_id = conn_set_prop->prop_id,
.obj_id = conn_set_prop->connector_id,
.obj_type = DRM_MODE_OBJECT_CONNECTOR
};
/* It does all the locking and checking we need */
return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
}
static int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
{
int ret = -EINVAL;
struct drm_connector *connector = obj_to_connector(obj);
/* Do DPMS ourselves */
if (property == connector->dev->mode_config.dpms_property) {
ret = 0;
if (connector->funcs->dpms)
ret = (*connector->funcs->dpms)(connector, (int)value);
} else if (connector->funcs->set_property)
ret = connector->funcs->set_property(connector, property, value);
/* store the property value if successful */
if (!ret)
drm_object_property_set_value(&connector->base, property, value);
return ret;
}
static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
{
int ret = -EINVAL;
struct drm_crtc *crtc = obj_to_crtc(obj);
if (crtc->funcs->set_property)
ret = crtc->funcs->set_property(crtc, property, value);
if (!ret)
drm_object_property_set_value(obj, property, value);
return ret;
}
/**
* drm_mode_plane_set_obj_prop - set the value of a property
* @plane: drm plane object to set property value for
* @property: property to set
* @value: value the property should be set to
*
* This functions sets a given property on a given plane object. This function
* calls the driver's ->set_property callback and changes the software state of
* the property if the callback succeeds.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
struct drm_property *property,
uint64_t value)
{
int ret = -EINVAL;
struct drm_mode_object *obj = &plane->base;
if (plane->funcs->set_property)
ret = plane->funcs->set_property(plane, property, value);
if (!ret)
drm_object_property_set_value(obj, property, value);
return ret;
}
EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
/**
* drm_mode_obj_get_properties_ioctl - get the current value of a object's property
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function retrieves the current value for an object's property. Compared
* to the connector specific ioctl this one is extended to also work on crtc and
* plane objects.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_obj_get_properties *arg = data;
struct drm_mode_object *obj;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type);
if (!obj) {
ret = -ENOENT;
goto out;
}
if (!obj->properties) {
ret = -EINVAL;
goto out;
}
ret = get_properties(obj, file_priv->atomic,
(uint32_t __user *)(unsigned long)(arg->props_ptr),
(uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
&arg->count_props);
out:
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_mode_obj_set_property_ioctl - set the current value of an object's property
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function sets the current value for an object's property. It also calls
* into a driver's ->set_property callback to update the hardware state.
* Compared to the connector specific ioctl this one is extended to also work on
* crtc and plane objects.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_obj_set_property *arg = data;
struct drm_mode_object *arg_obj;
struct drm_mode_object *prop_obj;
struct drm_property *property;
int i, ret = -EINVAL;
struct drm_mode_object *ref;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type);
if (!arg_obj) {
ret = -ENOENT;
goto out;
}
if (!arg_obj->properties)
goto out;
for (i = 0; i < arg_obj->properties->count; i++)
if (arg_obj->properties->properties[i]->base.id == arg->prop_id)
break;
if (i == arg_obj->properties->count)
goto out;
prop_obj = drm_mode_object_find(dev, arg->prop_id,
DRM_MODE_OBJECT_PROPERTY);
if (!prop_obj) {
ret = -ENOENT;
goto out;
}
property = obj_to_property(prop_obj);
if (!drm_property_change_valid_get(property, arg->value, &ref))
goto out;
switch (arg_obj->type) {
case DRM_MODE_OBJECT_CONNECTOR:
ret = drm_mode_connector_set_obj_prop(arg_obj, property,
arg->value);
break;
case DRM_MODE_OBJECT_CRTC:
ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value);
break;
case DRM_MODE_OBJECT_PLANE:
ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj),
property, arg->value);
break;
}
drm_property_change_valid_put(property, ref);
out:
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_mode_connector_attach_encoder - attach a connector to an encoder
* @connector: connector to attach
* @encoder: encoder to attach @connector to
*
* This function links up a connector to an encoder. Note that the routing
* restrictions between encoders and crtcs are exposed to userspace through the
* possible_clones and possible_crtcs bitmasks.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_connector_attach_encoder(struct drm_connector *connector,
struct drm_encoder *encoder)
{
int i;
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
if (connector->encoder_ids[i] == 0) {
connector->encoder_ids[i] = encoder->base.id;
return 0;
}
}
return -ENOMEM;
}
EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
/**
* drm_mode_crtc_set_gamma_size - set the gamma table size
* @crtc: CRTC to set the gamma table size for
* @gamma_size: size of the gamma table
*
* Drivers which support gamma tables should set this to the supported gamma
* table size when initializing the CRTC. Currently the drm core only supports a
* fixed gamma table size.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
int gamma_size)
{
crtc->gamma_size = gamma_size;
crtc->gamma_store = kcalloc(gamma_size, sizeof(uint16_t) * 3,
GFP_KERNEL);
if (!crtc->gamma_store) {
crtc->gamma_size = 0;
return -ENOMEM;
}
return 0;
}
EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
/**
* drm_mode_gamma_set_ioctl - set the gamma table
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Set the gamma table of a CRTC to the one passed in by the user. Userspace can
* inquire the required gamma table size through drm_mode_gamma_get_ioctl.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_gamma_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_lut *crtc_lut = data;
struct drm_crtc *crtc;
void *r_base, *g_base, *b_base;
int size;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
crtc = drm_crtc_find(dev, crtc_lut->crtc_id);
if (!crtc) {
ret = -ENOENT;
goto out;
}
if (crtc->funcs->gamma_set == NULL) {
ret = -ENOSYS;
goto out;
}
/* memcpy into gamma store */
if (crtc_lut->gamma_size != crtc->gamma_size) {
ret = -EINVAL;
goto out;
}
size = crtc_lut->gamma_size * (sizeof(uint16_t));
r_base = crtc->gamma_store;
if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) {
ret = -EFAULT;
goto out;
}
g_base = r_base + size;
if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) {
ret = -EFAULT;
goto out;
}
b_base = g_base + size;
if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) {
ret = -EFAULT;
goto out;
}
crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, 0, crtc->gamma_size);
out:
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_mode_gamma_get_ioctl - get the gamma table
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Copy the current gamma table into the storage provided. This also provides
* the gamma table size the driver expects, which can be used to size the
* allocated storage.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_gamma_get_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_lut *crtc_lut = data;
struct drm_crtc *crtc;
void *r_base, *g_base, *b_base;
int size;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
crtc = drm_crtc_find(dev, crtc_lut->crtc_id);
if (!crtc) {
ret = -ENOENT;
goto out;
}
/* memcpy into gamma store */
if (crtc_lut->gamma_size != crtc->gamma_size) {
ret = -EINVAL;
goto out;
}
size = crtc_lut->gamma_size * (sizeof(uint16_t));
r_base = crtc->gamma_store;
if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) {
ret = -EFAULT;
goto out;
}
g_base = r_base + size;
if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) {
ret = -EFAULT;
goto out;
}
b_base = g_base + size;
if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) {
ret = -EFAULT;
goto out;
}
out:
drm_modeset_unlock_all(dev);
return ret;
}
/**
* drm_mode_page_flip_ioctl - schedule an asynchronous fb update
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This schedules an asynchronous update on a given CRTC, called page flip.
* Optionally a drm event is generated to signal the completion of the event.
* Generic drivers cannot assume that a pageflip with changed framebuffer
* properties (including driver specific metadata like tiling layout) will work,
* but some drivers support e.g. pixel format changes through the pageflip
* ioctl.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_page_flip *page_flip = data;
struct drm_crtc *crtc;
struct drm_framebuffer *fb = NULL;
struct drm_pending_vblank_event *e = NULL;
unsigned long flags;
int ret = -EINVAL;
if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS ||
page_flip->reserved != 0)
return -EINVAL;
if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip)
return -EINVAL;
crtc = drm_crtc_find(dev, page_flip->crtc_id);
if (!crtc)
return -ENOENT;
drm_modeset_lock_crtc(crtc, crtc->primary);
if (crtc->primary->fb == NULL) {
/* The framebuffer is currently unbound, presumably
* due to a hotplug event, that userspace has not
* yet discovered.
*/
ret = -EBUSY;
goto out;
}
if (crtc->funcs->page_flip == NULL)
goto out;
fb = drm_framebuffer_lookup(dev, page_flip->fb_id);
if (!fb) {
ret = -ENOENT;
goto out;
}
ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y, &crtc->mode, fb);
if (ret)
goto out;
if (crtc->primary->fb->pixel_format != fb->pixel_format) {
DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n");
ret = -EINVAL;
goto out;
}
if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
ret = -ENOMEM;
spin_lock_irqsave(&dev->event_lock, flags);
if (file_priv->event_space < sizeof(e->event)) {
spin_unlock_irqrestore(&dev->event_lock, flags);
goto out;
}
file_priv->event_space -= sizeof(e->event);
spin_unlock_irqrestore(&dev->event_lock, flags);
e = kzalloc(sizeof(*e), GFP_KERNEL);
if (e == NULL) {
spin_lock_irqsave(&dev->event_lock, flags);
file_priv->event_space += sizeof(e->event);
spin_unlock_irqrestore(&dev->event_lock, flags);
goto out;
}
e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
e->event.base.length = sizeof(e->event);
e->event.user_data = page_flip->user_data;
e->base.event = &e->event.base;
e->base.file_priv = file_priv;
e->base.destroy =
(void (*) (struct drm_pending_event *)) kfree;
}
crtc->primary->old_fb = crtc->primary->fb;
ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags);
if (ret) {
if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
spin_lock_irqsave(&dev->event_lock, flags);
file_priv->event_space += sizeof(e->event);
spin_unlock_irqrestore(&dev->event_lock, flags);
kfree(e);
}
/* Keep the old fb, don't unref it. */
crtc->primary->old_fb = NULL;
} else {
crtc->primary->fb = fb;
/* Unref only the old framebuffer. */
fb = NULL;
}
out:
if (fb)
drm_framebuffer_unreference(fb);
if (crtc->primary->old_fb)
drm_framebuffer_unreference(crtc->primary->old_fb);
crtc->primary->old_fb = NULL;
drm_modeset_unlock_crtc(crtc);
return ret;
}
/**
* drm_mode_config_reset - call ->reset callbacks
* @dev: drm device
*
* This functions calls all the crtc's, encoder's and connector's ->reset
* callback. Drivers can use this in e.g. their driver load or resume code to
* reset hardware and software state.
*/
void drm_mode_config_reset(struct drm_device *dev)
{
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_encoder *encoder;
struct drm_connector *connector;
drm_for_each_plane(plane, dev)
if (plane->funcs->reset)
plane->funcs->reset(plane);
drm_for_each_crtc(crtc, dev)
if (crtc->funcs->reset)
crtc->funcs->reset(crtc);
drm_for_each_encoder(encoder, dev)
if (encoder->funcs->reset)
encoder->funcs->reset(encoder);
mutex_lock(&dev->mode_config.mutex);
drm_for_each_connector(connector, dev)
if (connector->funcs->reset)
connector->funcs->reset(connector);
mutex_unlock(&dev->mode_config.mutex);
}
EXPORT_SYMBOL(drm_mode_config_reset);
/**
* drm_mode_create_dumb_ioctl - create a dumb backing storage buffer
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This creates a new dumb buffer in the driver's backing storage manager (GEM,
* TTM or something else entirely) and returns the resulting buffer handle. This
* handle can then be wrapped up into a framebuffer modeset object.
*
* Note that userspace is not allowed to use such objects for render
* acceleration - drivers must create their own private ioctls for such a use
* case.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_create_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_create_dumb *args = data;
u32 cpp, stride, size;
if (!dev->driver->dumb_create)
return -ENOSYS;
if (!args->width || !args->height || !args->bpp)
return -EINVAL;
/* overflow checks for 32bit size calculations */
/* NOTE: DIV_ROUND_UP() can overflow */
cpp = DIV_ROUND_UP(args->bpp, 8);
if (!cpp || cpp > 0xffffffffU / args->width)
return -EINVAL;
stride = cpp * args->width;
if (args->height > 0xffffffffU / stride)
return -EINVAL;
/* test for wrap-around */
size = args->height * stride;
if (PAGE_ALIGN(size) == 0)
return -EINVAL;
/*
* handle, pitch and size are output parameters. Zero them out to
* prevent drivers from accidentally using uninitialized data. Since
* not all existing userspace is clearing these fields properly we
* cannot reject IOCTL with garbage in them.
*/
args->handle = 0;
args->pitch = 0;
args->size = 0;
return dev->driver->dumb_create(file_priv, dev, args);
}
/**
* drm_mode_mmap_dumb_ioctl - create an mmap offset for a dumb backing storage buffer
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* Allocate an offset in the drm device node's address space to be able to
* memory map a dumb buffer.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_map_dumb *args = data;
/* call driver ioctl to get mmap offset */
if (!dev->driver->dumb_map_offset)
return -ENOSYS;
return dev->driver->dumb_map_offset(file_priv, dev, args->handle, &args->offset);
}
/**
* drm_mode_destroy_dumb_ioctl - destroy a dumb backing strage buffer
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This destroys the userspace handle for the given dumb backing storage buffer.
* Since buffer objects must be reference counted in the kernel a buffer object
* won't be immediately freed if a framebuffer modeset object still uses it.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_destroy_dumb *args = data;
if (!dev->driver->dumb_destroy)
return -ENOSYS;
return dev->driver->dumb_destroy(file_priv, dev, args->handle);
}
/**
* drm_fb_get_bpp_depth - get the bpp/depth values for format
* @format: pixel format (DRM_FORMAT_*)
* @depth: storage for the depth value
* @bpp: storage for the bpp value
*
* This only supports RGB formats here for compat with code that doesn't use
* pixel formats directly yet.
*/
void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth,
int *bpp)
{
switch (format) {
case DRM_FORMAT_C8:
case DRM_FORMAT_RGB332:
case DRM_FORMAT_BGR233:
*depth = 8;
*bpp = 8;
break;
case DRM_FORMAT_XRGB1555:
case DRM_FORMAT_XBGR1555:
case DRM_FORMAT_RGBX5551:
case DRM_FORMAT_BGRX5551:
case DRM_FORMAT_ARGB1555:
case DRM_FORMAT_ABGR1555:
case DRM_FORMAT_RGBA5551:
case DRM_FORMAT_BGRA5551:
*depth = 15;
*bpp = 16;
break;
case DRM_FORMAT_RGB565:
case DRM_FORMAT_BGR565:
*depth = 16;
*bpp = 16;
break;
case DRM_FORMAT_RGB888:
case DRM_FORMAT_BGR888:
*depth = 24;
*bpp = 24;
break;
case DRM_FORMAT_XRGB8888:
case DRM_FORMAT_XBGR8888:
case DRM_FORMAT_RGBX8888:
case DRM_FORMAT_BGRX8888:
*depth = 24;
*bpp = 32;
break;
case DRM_FORMAT_XRGB2101010:
case DRM_FORMAT_XBGR2101010:
case DRM_FORMAT_RGBX1010102:
case DRM_FORMAT_BGRX1010102:
case DRM_FORMAT_ARGB2101010:
case DRM_FORMAT_ABGR2101010:
case DRM_FORMAT_RGBA1010102:
case DRM_FORMAT_BGRA1010102:
*depth = 30;
*bpp = 32;
break;
case DRM_FORMAT_ARGB8888:
case DRM_FORMAT_ABGR8888:
case DRM_FORMAT_RGBA8888:
case DRM_FORMAT_BGRA8888:
*depth = 32;
*bpp = 32;
break;
default:
DRM_DEBUG_KMS("unsupported pixel format %s\n",
drm_get_format_name(format));
*depth = 0;
*bpp = 0;
break;
}
}
EXPORT_SYMBOL(drm_fb_get_bpp_depth);
/**
* drm_format_num_planes - get the number of planes for format
* @format: pixel format (DRM_FORMAT_*)
*
* Returns:
* The number of planes used by the specified pixel format.
*/
int drm_format_num_planes(uint32_t format)
{
switch (format) {
case DRM_FORMAT_YUV410:
case DRM_FORMAT_YVU410:
case DRM_FORMAT_YUV411:
case DRM_FORMAT_YVU411:
case DRM_FORMAT_YUV420:
case DRM_FORMAT_YVU420:
case DRM_FORMAT_YUV422:
case DRM_FORMAT_YVU422:
case DRM_FORMAT_YUV444:
case DRM_FORMAT_YVU444:
return 3;
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV21:
case DRM_FORMAT_NV16:
case DRM_FORMAT_NV61:
case DRM_FORMAT_NV24:
case DRM_FORMAT_NV42:
return 2;
default:
return 1;
}
}
EXPORT_SYMBOL(drm_format_num_planes);
/**
* drm_format_plane_cpp - determine the bytes per pixel value
* @format: pixel format (DRM_FORMAT_*)
* @plane: plane index
*
* Returns:
* The bytes per pixel value for the specified plane.
*/
int drm_format_plane_cpp(uint32_t format, int plane)
{
unsigned int depth;
int bpp;
if (plane >= drm_format_num_planes(format))
return 0;
switch (format) {
case DRM_FORMAT_YUYV:
case DRM_FORMAT_YVYU:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_VYUY:
return 2;
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV21:
case DRM_FORMAT_NV16:
case DRM_FORMAT_NV61:
case DRM_FORMAT_NV24:
case DRM_FORMAT_NV42:
return plane ? 2 : 1;
case DRM_FORMAT_YUV410:
case DRM_FORMAT_YVU410:
case DRM_FORMAT_YUV411:
case DRM_FORMAT_YVU411:
case DRM_FORMAT_YUV420:
case DRM_FORMAT_YVU420:
case DRM_FORMAT_YUV422:
case DRM_FORMAT_YVU422:
case DRM_FORMAT_YUV444:
case DRM_FORMAT_YVU444:
return 1;
default:
drm_fb_get_bpp_depth(format, &depth, &bpp);
return bpp >> 3;
}
}
EXPORT_SYMBOL(drm_format_plane_cpp);
/**
* drm_format_horz_chroma_subsampling - get the horizontal chroma subsampling factor
* @format: pixel format (DRM_FORMAT_*)
*
* Returns:
* The horizontal chroma subsampling factor for the
* specified pixel format.
*/
int drm_format_horz_chroma_subsampling(uint32_t format)
{
switch (format) {
case DRM_FORMAT_YUV411:
case DRM_FORMAT_YVU411:
case DRM_FORMAT_YUV410:
case DRM_FORMAT_YVU410:
return 4;
case DRM_FORMAT_YUYV:
case DRM_FORMAT_YVYU:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_VYUY:
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV21:
case DRM_FORMAT_NV16:
case DRM_FORMAT_NV61:
case DRM_FORMAT_YUV422:
case DRM_FORMAT_YVU422:
case DRM_FORMAT_YUV420:
case DRM_FORMAT_YVU420:
return 2;
default:
return 1;
}
}
EXPORT_SYMBOL(drm_format_horz_chroma_subsampling);
/**
* drm_format_vert_chroma_subsampling - get the vertical chroma subsampling factor
* @format: pixel format (DRM_FORMAT_*)
*
* Returns:
* The vertical chroma subsampling factor for the
* specified pixel format.
*/
int drm_format_vert_chroma_subsampling(uint32_t format)
{
switch (format) {
case DRM_FORMAT_YUV410:
case DRM_FORMAT_YVU410:
return 4;
case DRM_FORMAT_YUV420:
case DRM_FORMAT_YVU420:
case DRM_FORMAT_NV12:
case DRM_FORMAT_NV21:
return 2;
default:
return 1;
}
}
EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
/**
* drm_rotation_simplify() - Try to simplify the rotation
* @rotation: Rotation to be simplified
* @supported_rotations: Supported rotations
*
* Attempt to simplify the rotation to a form that is supported.
* Eg. if the hardware supports everything except DRM_REFLECT_X
* one could call this function like this:
*
* drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
* BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
* BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
*
* to eliminate the DRM_ROTATE_X flag. Depending on what kind of
* transforms the hardware supports, this function may not
* be able to produce a supported transform, so the caller should
* check the result afterwards.
*/
unsigned int drm_rotation_simplify(unsigned int rotation,
unsigned int supported_rotations)
{
if (rotation & ~supported_rotations) {
rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
rotation = (rotation & ~0xf) | BIT((ffs(rotation & 0xf) + 1) % 4);
}
return rotation;
}
EXPORT_SYMBOL(drm_rotation_simplify);
/**
* drm_mode_config_init - initialize DRM mode_configuration structure
* @dev: DRM device
*
* Initialize @dev's mode_config structure, used for tracking the graphics
* configuration of @dev.
*
* Since this initializes the modeset locks, no locking is possible. Which is no
* problem, since this should happen single threaded at init time. It is the
* driver's problem to ensure this guarantee.
*
*/
void drm_mode_config_init(struct drm_device *dev)
{
mutex_init(&dev->mode_config.mutex);
drm_modeset_lock_init(&dev->mode_config.connection_mutex);
mutex_init(&dev->mode_config.idr_mutex);
mutex_init(&dev->mode_config.fb_lock);
mutex_init(&dev->mode_config.blob_lock);
INIT_LIST_HEAD(&dev->mode_config.fb_list);
INIT_LIST_HEAD(&dev->mode_config.crtc_list);
INIT_LIST_HEAD(&dev->mode_config.connector_list);
INIT_LIST_HEAD(&dev->mode_config.encoder_list);
INIT_LIST_HEAD(&dev->mode_config.property_list);
INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
INIT_LIST_HEAD(&dev->mode_config.plane_list);
idr_init(&dev->mode_config.crtc_idr);
idr_init(&dev->mode_config.tile_idr);
drm_modeset_lock_all(dev);
drm_mode_create_standard_properties(dev);
drm_modeset_unlock_all(dev);
/* Just to be sure */
dev->mode_config.num_fb = 0;
dev->mode_config.num_connector = 0;
dev->mode_config.num_crtc = 0;
dev->mode_config.num_encoder = 0;
dev->mode_config.num_overlay_plane = 0;
dev->mode_config.num_total_plane = 0;
}
EXPORT_SYMBOL(drm_mode_config_init);
/**
* drm_mode_config_cleanup - free up DRM mode_config info
* @dev: DRM device
*
* Free up all the connectors and CRTCs associated with this DRM device, then
* free up the framebuffers and associated buffer objects.
*
* Note that since this /should/ happen single-threaded at driver/device
* teardown time, no locking is required. It's the driver's job to ensure that
* this guarantee actually holds true.
*
* FIXME: cleanup any dangling user buffer objects too
*/
void drm_mode_config_cleanup(struct drm_device *dev)
{
struct drm_connector *connector, *ot;
struct drm_crtc *crtc, *ct;
struct drm_encoder *encoder, *enct;
struct drm_framebuffer *fb, *fbt;
struct drm_property *property, *pt;
struct drm_property_blob *blob, *bt;
struct drm_plane *plane, *plt;
list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
head) {
encoder->funcs->destroy(encoder);
}
list_for_each_entry_safe(connector, ot,
&dev->mode_config.connector_list, head) {
connector->funcs->destroy(connector);
}
list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
head) {
drm_property_destroy(dev, property);
}
list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list,
head_global) {
drm_property_unreference_blob(blob);
}
/*
* Single-threaded teardown context, so it's not required to grab the
* fb_lock to protect against concurrent fb_list access. Contrary, it
* would actually deadlock with the drm_framebuffer_cleanup function.
*
* Also, if there are any framebuffers left, that's a driver leak now,
* so politely WARN about this.
*/
WARN_ON(!list_empty(&dev->mode_config.fb_list));
list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
drm_framebuffer_free(&fb->refcount);
}
list_for_each_entry_safe(plane, plt, &dev->mode_config.plane_list,
head) {
plane->funcs->destroy(plane);
}
list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
crtc->funcs->destroy(crtc);
}
idr_destroy(&dev->mode_config.tile_idr);
idr_destroy(&dev->mode_config.crtc_idr);
drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
}
EXPORT_SYMBOL(drm_mode_config_cleanup);
struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
unsigned int supported_rotations)
{
static const struct drm_prop_enum_list props[] = {
{ DRM_ROTATE_0, "rotate-0" },
{ DRM_ROTATE_90, "rotate-90" },
{ DRM_ROTATE_180, "rotate-180" },
{ DRM_ROTATE_270, "rotate-270" },
{ DRM_REFLECT_X, "reflect-x" },
{ DRM_REFLECT_Y, "reflect-y" },
};
return drm_property_create_bitmask(dev, 0, "rotation",
props, ARRAY_SIZE(props),
supported_rotations);
}
EXPORT_SYMBOL(drm_mode_create_rotation_property);
/**
* DOC: Tile group
*
* Tile groups are used to represent tiled monitors with a unique
* integer identifier. Tiled monitors using DisplayID v1.3 have
* a unique 8-byte handle, we store this in a tile group, so we
* have a common identifier for all tiles in a monitor group.
*/
static void drm_tile_group_free(struct kref *kref)
{
struct drm_tile_group *tg = container_of(kref, struct drm_tile_group, refcount);
struct drm_device *dev = tg->dev;
mutex_lock(&dev->mode_config.idr_mutex);
idr_remove(&dev->mode_config.tile_idr, tg->id);
mutex_unlock(&dev->mode_config.idr_mutex);
kfree(tg);
}
/**
* drm_mode_put_tile_group - drop a reference to a tile group.
* @dev: DRM device
* @tg: tile group to drop reference to.
*
* drop reference to tile group and free if 0.
*/
void drm_mode_put_tile_group(struct drm_device *dev,
struct drm_tile_group *tg)
{
kref_put(&tg->refcount, drm_tile_group_free);
}
/**
* drm_mode_get_tile_group - get a reference to an existing tile group
* @dev: DRM device
* @topology: 8-bytes unique per monitor.
*
* Use the unique bytes to get a reference to an existing tile group.
*
* RETURNS:
* tile group or NULL if not found.
*/
struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
char topology[8])
{
struct drm_tile_group *tg;
int id;
mutex_lock(&dev->mode_config.idr_mutex);
idr_for_each_entry(&dev->mode_config.tile_idr, tg, id) {
if (!memcmp(tg->group_data, topology, 8)) {
if (!kref_get_unless_zero(&tg->refcount))
tg = NULL;
mutex_unlock(&dev->mode_config.idr_mutex);
return tg;
}
}
mutex_unlock(&dev->mode_config.idr_mutex);
return NULL;
}
EXPORT_SYMBOL(drm_mode_get_tile_group);
/**
* drm_mode_create_tile_group - create a tile group from a displayid description
* @dev: DRM device
* @topology: 8-bytes unique per monitor.
*
* Create a tile group for the unique monitor, and get a unique
* identifier for the tile group.
*
* RETURNS:
* new tile group or error.
*/
struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
char topology[8])
{
struct drm_tile_group *tg;
int ret;
tg = kzalloc(sizeof(*tg), GFP_KERNEL);
if (!tg)
return ERR_PTR(-ENOMEM);
kref_init(&tg->refcount);
memcpy(tg->group_data, topology, 8);
tg->dev = dev;
mutex_lock(&dev->mode_config.idr_mutex);
ret = idr_alloc(&dev->mode_config.tile_idr, tg, 1, 0, GFP_KERNEL);
if (ret >= 0) {
tg->id = ret;
} else {
kfree(tg);
tg = ERR_PTR(ret);
}
mutex_unlock(&dev->mode_config.idr_mutex);
return tg;
}
EXPORT_SYMBOL(drm_mode_create_tile_group);