| /* |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| &rpm_bus { |
| rpm-regulator-ldoc1 { |
| status = "okay"; |
| pm8004_l1: regulator-l1 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| &spmi_bus { |
| qcom,pm8953@1 { |
| /delete-node/ spm-regulator@2000; |
| }; |
| |
| pmic@5 { |
| #size-cells = <1>; |
| |
| /* PM8004 S2 + S4 + S5 = VDD_APC supply */ |
| pm8004_s2: spm-regulator@1d00 { |
| compatible = "qcom,spm-regulator"; |
| reg = <0x1d00 0x100>; |
| regulator-name = "pm8004_s2"; |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1140000>; |
| |
| pm8004_s2_limit: avs-limit-regulator { |
| regulator-name = "pm8004_s2_avs_limit"; |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1140000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &soc { |
| /delete-node/ regulator@19461d4; |
| /delete-node/ cpr4-ctrl@b018000; |
| /delete-node/ regulator@194415c; |
| /delete-node/ ldo@185f000; |
| |
| apc_mem_acc_vreg: apc-mem-acc-regulator { |
| compatible = "qcom,mem-acc-regulator"; |
| regulator-name = "apc_mem_acc_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <3>; |
| qcom,acc-reg-addr-list = <0x0b1d1360 0x0b1d1364 |
| 0x0b1d1368 0x0b1d136c 0x0b1d1370>; |
| qcom,num-acc-corners = <3>; |
| qcom,boot-acc-corner = <1>; |
| qcom,corner1-reg-config = |
| /* 1 -> 1 */ |
| <(-1) (-1)>, <(-1) (-1)>, |
| <(-1) (-1)>, <(-1) (-1)>, <(-1) (-1)>, |
| /* 1 -> 2 */ |
| < 1 0x0>, < 2 0x0>, |
| < 3 0x0>, < 4 0x0>, < 5 0x0>, |
| /* 1 -> 3 */ |
| < 1 0x0>, < 2 0x1>, |
| < 3 0x0>, < 4 0x10000>, < 5 0x0>; |
| qcom,corner2-reg-config = |
| /* 2 -> 1 */ |
| < 1 0x0>, < 2 0x80000000>, |
| < 3 0x0>, < 4 0x0>, < 5 0x80000000>, |
| /* 2 -> 2 */ |
| <(-1) (-1)>, <(-1) (-1)>, |
| <(-1) (-1)>, <(-1) (-1)>, <(-1) (-1)>, |
| /* 2 -> 3 */ |
| < 1 0x0>, < 2 0x1>, |
| < 3 0x0>, < 4 0x10000>, < 5 0x0>; |
| qcom,corner3-reg-config = |
| /* 3 -> 1 */ |
| < 1 0x0>, < 2 0x80000000>, |
| < 3 0x0>, < 4 0x0>, < 5 0x80000000>, |
| /* 3 -> 2 */ |
| < 1 0x0>, < 2 0x0>, |
| < 3 0x0>, < 4 0x0>, < 5 0x0>, |
| /* 3 -> 3 */ |
| <(-1) (-1)>, <(-1) (-1)>, |
| <(-1) (-1)>, <(-1) (-1)>, <(-1) (-1)>; |
| }; |
| |
| apc_cpr: cpr4-ctrl@b018000 { |
| compatible = "qcom,cpr4-sdm632-apss-regulator"; |
| reg = <0xb018000 0x4000>, <0xa4000 0x1000>; |
| reg-names = "cpr_ctrl", "fuse_base"; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "cpr"; |
| |
| qcom,cpr-ctrl-name = "apc"; |
| |
| qcom,cpr-sensor-time = <1000>; |
| qcom,cpr-loop-time = <5000000>; |
| qcom,cpr-idle-cycles = <15>; |
| qcom,cpr-step-quot-init-min = <12>; |
| qcom,cpr-step-quot-init-max = <14>; |
| qcom,cpr-count-mode = <0>; /* All-at-once */ |
| qcom,cpr-count-repeat = <14>; |
| qcom,cpr-down-error-step-limit = <1>; |
| qcom,cpr-up-error-step-limit = <1>; |
| |
| qcom,apm-ctrl = <&apc_apm>; |
| qcom,apm-threshold-voltage = <875000>; |
| qcom,apm-hysteresis-voltage = <20000>; |
| |
| vdd-supply = <&pm8004_s2>; |
| qcom,voltage-step = <5000>; |
| vdd-limit-supply = <&pm8004_s2_limit>; |
| mem-acc-supply = <&apc_mem_acc_vreg>; |
| |
| qcom,cpr-panic-reg-addr-list = |
| <0xb1d2c18 0xb1d2900 0x0b1112b0 0xb018798>; |
| qcom,cpr-panic-reg-name-list = |
| "CCI_SAW4_PMIC_STS", "CCI_SAW4_VCTL", |
| "APCS_ALIAS0_APM_CTLER_STATUS", |
| "APCS0_CPR_CORE_ADJ_MODE_REG"; |
| |
| thread@0 { |
| qcom,cpr-thread-id = <0>; |
| qcom,cpr-consecutive-up = <0>; |
| qcom,cpr-consecutive-down = <2>; |
| qcom,cpr-up-threshold = <2>; |
| qcom,cpr-down-threshold = <1>; |
| |
| apc0_pwrcl_vreg: regulator { |
| regulator-name = "apc0_pwrcl_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| |
| qcom,cpr-fuse-corners = <5>; |
| qcom,cpr-fuse-combos = <8>; |
| qcom,cpr-corners = <7>; |
| qcom,cpr-corner-fmax-map = <1 2 3 4 7>; |
| |
| qcom,cpr-voltage-ceiling = |
| <720000 720000 790000 865000 920000 |
| 990000 1065000>; |
| |
| qcom,cpr-voltage-floor = |
| <500000 500000 500000 500000 500000 |
| 500000 500000>; |
| |
| qcom,mem-acc-voltage = <1 1 2 2 2 2 3>; |
| |
| qcom,corner-frequencies = |
| <614400000 883200000 1036800000 |
| 1363200000 1536000000 1670400000 |
| 1785600000>; |
| |
| qcom,cpr-ro-scaling-factor = |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>, |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>, |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>, |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>, |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>; |
| |
| qcom,allow-voltage-interpolation; |
| qcom,allow-quotient-interpolation; |
| qcom,cpr-scaled-open-loop-voltage-as-ceiling; |
| }; |
| }; |
| |
| thread@1 { |
| qcom,cpr-thread-id = <1>; |
| qcom,cpr-consecutive-up = <0>; |
| qcom,cpr-consecutive-down = <2>; |
| qcom,cpr-up-threshold = <2>; |
| qcom,cpr-down-threshold = <1>; |
| |
| apc1_perfcl_vreg: regulator { |
| regulator-name = "apc1_perfcl_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <5>; |
| |
| qcom,cpr-fuse-corners = <3>; |
| qcom,cpr-fuse-combos = <8>; |
| qcom,cpr-corners = <5>; |
| qcom,cpr-corner-fmax-map = <1 2 5>; |
| |
| qcom,cpr-voltage-ceiling = |
| <790000 865000 920000 990000 1065000>; |
| |
| qcom,cpr-voltage-floor = |
| <500000 500000 500000 500000 500000>; |
| |
| qcom,mem-acc-voltage = <2 2 2 2 3>; |
| |
| qcom,corner-frequencies = |
| <1094400000 1401600000 1555200000 |
| 1785600000 1996200000>; |
| |
| qcom,cpr-ro-scaling-factor = |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>, |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>, |
| <3600 3600 3830 2430 2520 2700 1790 1760 |
| 1970 1880 2110 2010 2510 4900 4370 4780>; |
| |
| qcom,allow-voltage-interpolation; |
| qcom,allow-quotient-interpolation; |
| qcom,cpr-scaled-open-loop-voltage-as-ceiling; |
| }; |
| }; |
| }; |
| |
| gfx_mem_acc: regulator@194415c { |
| compatible = "qcom,mem-acc-regulator"; |
| reg = <0x0194415c 0x4>; |
| reg-names = "acc-sel-l1"; |
| regulator-name = "gfx_mem_acc_corner"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <2>; |
| |
| qcom,acc-sel-l1-bit-pos = <0>; |
| qcom,acc-sel-l1-bit-size = <1>; |
| qcom,corner-acc-map = <0x1 0x0>; |
| }; |
| |
| gfx_vreg_corner: ldo@185f000 { |
| compatible = "qcom,msm8953-gfx-ldo"; |
| reg = <0x0185f000 0x30>, <0xa4000 0x1000>; |
| reg-names = "ldo_addr", "efuse_addr"; |
| |
| regulator-name = "msm_gfx_ldo"; |
| regulator-min-microvolt = <1>; |
| regulator-max-microvolt = <7>; |
| |
| qcom,ldo-voltage-ceiling = <620000 680000 750000>; |
| qcom,ldo-voltage-floor = <510000 510000 600000>; |
| |
| qcom,num-corners = <7>; |
| qcom,num-ldo-corners = <3>; |
| qcom,ldo-enable-corner-map = <0 0 0 0 0 0 0>; |
| qcom,init-corner = <4>; |
| |
| vdd-cx-supply = <&pm8953_s2_level>; |
| qcom,vdd-cx-corner-map = <RPM_SMD_REGULATOR_LEVEL_LOW_SVS>, |
| <RPM_SMD_REGULATOR_LEVEL_LOW_SVS>, |
| <RPM_SMD_REGULATOR_LEVEL_SVS>, |
| <RPM_SMD_REGULATOR_LEVEL_SVS_PLUS>, |
| <RPM_SMD_REGULATOR_LEVEL_NOM>, |
| <RPM_SMD_REGULATOR_LEVEL_NOM_PLUS>, |
| <RPM_SMD_REGULATOR_LEVEL_TURBO>; |
| |
| mem-acc-supply = <&gfx_mem_acc>; |
| qcom,mem-acc-corner-map = <1 1 1 2 2 2 2>; |
| }; |
| }; |