blob: 20008a4376e8924895a2b245a165098c12857d13 [file] [log] [blame]
config COMEDI
tristate "Data acquisition support (comedi)"
default N
depends on m
depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
---help---
Enable support a wide range of data acquisition devices
for Linux.
config COMEDI_DEBUG
bool "Comedi debugging"
depends on COMEDI != n
---help---
This is an option for use by developers; most people should
say N here. This enables comedi core and driver debugging.
menuconfig COMEDI_MISC_DRIVERS
tristate "Comedi misc drivers"
depends on COMEDI
default N
---help---
Enable comedi misc drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about misc non-hardware comedi drivers.
if COMEDI_MISC_DRIVERS
config COMEDI_KCOMEDILIB
tristate "Comedi kcomedilib"
---help---
Build the kcomedilib
config COMEDI_BOND
tristate "Device bonding support"
depends on COMEDI_KCOMEDILIB
default N
---help---
Enable support for a driver to 'bond' (merge) multiple subdevices
from multiple devices together as one.
To compile this driver as a module, choose M here: the module will be
called comedi_bond.
config COMEDI_TEST
tristate "Fake waveform generator support"
select COMEDI_FC
default N
---help---
Enable support for the fake waveform generator.
This driver is mainly for testing purposes, but can also be used to
generate sample waveforms on systems that don't have data acquisition
hardware.
To compile this driver as a module, choose M here: the module will be
called comedi_test.
config COMEDI_PARPORT
tristate "Parallel port support"
default N
---help---
Enable support for the standard parallel port.
A cheap and easy way to get a few more digital I/O lines. Steal
additional parallel ports from old computers or your neighbors'
computers.
To compile this driver as a module, choose M here: the module will be
called comedi_parport.
config COMEDI_SERIAL2002
tristate "Driver for serial connected hardware"
default N
---help---
Enable support for serial connected hardware
To compile this driver as a module, choose M here: the module will be
called serial2002.
config COMEDI_SKEL
tristate "Comedi skeleton driver"
default N
---help---
Build the Skeleton driver, an example for driver writers
To compile this driver as a module, choose M here: the module will be
called skel.
endif # COMEDI_MISC_DRIVERS
menuconfig COMEDI_ISA_DRIVERS
tristate "Comedi ISA and PC/104 drivers"
depends on COMEDI && ISA
default N
---help---
Enable comedi ISA and PC/104 drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about ISA and PC/104 comedi drivers.
if COMEDI_ISA_DRIVERS && ISA
config COMEDI_ACL7225B
tristate "ADlink NuDAQ ACL-7225b and compatibles support"
default N
---help---
Enable support for ADlink NuDAQ ACL-7225b and compatibles,
ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
To compile this driver as a module, choose M here: the module will be
called acl7225b.
config COMEDI_PCL711
tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
default N
---help---
Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
To compile this driver as a module, choose M here: the module will be
called pcl711.
config COMEDI_PCL724
tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
select COMEDI_8255
default N
---help---
Enable support for Advantech PCL-724, PCL-722, PCL-731 and
ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
To compile this driver as a module, choose M here: the module will be
called pcl724.
config COMEDI_PCL725
tristate "Advantech PCL-725 and compatible ISA card support"
default N
---help---
Enable support for Advantech PCL-725 and compatible ISA cards.
To compile this driver as a module, choose M here: the module will be
called pcl725.
config COMEDI_PCL726
tristate "Advantech PCL-726 and compatible ISA card support"
default N
---help---
Enable support for Advantech PCL-726 and compatible ISA cards.
To compile this driver as a module, choose M here: the module will be
called pcl726.
config COMEDI_PCL730
tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
default N
---help---
Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
ACL-7130 ISA cards
To compile this driver as a module, choose M here: the module will be
called pcl730.
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
To compile this driver as a module, choose M here: the module will be
called pcl812.
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-814 and PCL-816 ISA cards
To compile this driver as a module, choose M here: the module will be
called pcl816.
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-818 ISA cards
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
To compile this driver as a module, choose M here: the module will be
called pcl818.
config COMEDI_PCM3724
tristate "Advantech PCM-3724 PC/104 card support"
select COMEDI_8255
default N
---help---
Enable support for Advantech PCM-3724 PC/104 cards.
To compile this driver as a module, choose M here: the module will be
called pcm3724.
config COMEDI_PCM3730
tristate "Advantech PCM-3730 and clone PC/104 board support"
default N
---help---
Enable support for Advantech PCM-3730 and clone PC/104 boards
To compile this driver as a module, choose M here: the module will be
called pcm3730.
config COMEDI_RTI800
tristate "Analog Devices RTI-800/815 ISA card support"
default N
---help---
Enable support for Analog Devices RTI-800/815 ISA cards
To compile this driver as a module, choose M here: the module will be
called rti800.
config COMEDI_RTI802
tristate "Analog Devices RTI-802 ISA card support"
default N
---help---
Enable support for Analog Devices RTI-802 ISA cards
To compile this driver as a module, choose M here: the module will be
called rti802.
config COMEDI_DAS16M1
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
select COMEDI_8255
select COMEDI_FC
default N
---help---
Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
To compile this driver as a module, choose M here: the module will be
called das16m1.
config COMEDI_DAS16
tristate "DAS-16 compatible ISA and PC/104 card support"
select COMEDI_8255
select COMEDI_FC
default N
---help---
Enable support for Keithley Metrabyte/ComputerBoards DAS16
and compatible ISA and PC/104 cards:
Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
CIO-DAS1602/16, CIO-DAS16/330
To compile this driver as a module, choose M here: the module will be
called das16.
config COMEDI_DAS800
tristate "DAS800 and compatible ISA card support"
select COMEDI_FC
default N
---help---
Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
Keithley Metrabyte DAS-800, DAS-801, DAS-802
Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
CIO-DAS802/16
To compile this driver as a module, choose M here: the module will be
called das800.
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
Enable support for DAS1800 and compatible ISA cards
Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
DAS-1802AO
To compile this driver as a module, choose M here: the module will be
called das1800.
config COMEDI_DAS6402
tristate "DAS6402 and compatible ISA card support"
default N
---help---
Enable support for DAS6402 and compatible ISA cards
Computerboards, Keithley Metrabyte DAS6402 and compatibles
To compile this driver as a module, choose M here: the module will be
called das6402.
config COMEDI_DT2801
tristate "Data Translation DT2801 ISA card support"
default N
---help---
Enable support for Data Translation DT2801 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2801.
config COMEDI_DT2811
tristate "Data Translation DT2811 ISA card support"
default N
---help---
Enable support for Data Translation DT2811 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2811.
config COMEDI_DT2814
tristate "Data Translation DT2814 ISA card support"
default N
---help---
Enable support for Data Translation DT2814 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2814.
config COMEDI_DT2815
tristate "Data Translation DT2815 ISA card support"
default N
---help---
Enable support for Data Translation DT2815 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2815.
config COMEDI_DT2817
tristate "Data Translation DT2817 ISA card support"
default N
---help---
Enable support for Data Translation DT2817 ISA cards
To compile this driver as a module, choose M here: the module will be
called dt2817.
config COMEDI_DT282X
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select COMEDI_FC
depends on VIRT_TO_BUS
default N
---help---
Enable support for Data Translation DT2821 series including DT-EZ
DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
To compile this driver as a module, choose M here: the module will be
called dt282x.
config COMEDI_DMM32AT
tristate "Diamond Systems MM-32-AT PC/104 board support"
default N
---help---
Enable support for Diamond Systems MM-32-AT PC/104 boards
To compile this driver as a module, choose M here: the module will be
called dmm32at.
config COMEDI_FL512
tristate "FL512 ISA card support"
default N
---help---
Enable support for FL512 ISA card
To compile this driver as a module, choose M here: the module will be
called fl512.
config COMEDI_AIO_AIO12_8
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
select COMEDI_8255
default N
---help---
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
To compile this driver as a module, choose M here: the module will be
called aio_aio12_8.
config COMEDI_AIO_IIRO_16
tristate "I/O Products PC/104 IIRO16 Board support"
default N
---help---
Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
Input Board
To compile this driver as a module, choose M here: the module will be
called aio_iiro_16.
config COMEDI_C6XDIGIO
tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
default N
---help---
Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
card
To compile this driver as a module, choose M here: the module will be
called c6xdigio.
config COMEDI_MPC624
tristate "Micro/sys MPC-624 PC/104 board support"
default N
---help---
Enable support for Micro/sys MPC-624 PC/104 board
To compile this driver as a module, choose M here: the module will be
called mpc624.
config COMEDI_ADQ12B
tristate "MicroAxial ADQ12-B data acquisition and control card support"
default N
---help---
Enable MicroAxial ADQ12-B daq and control card support.
To compile this driver as a module, choose M here: the module will be
called adq12b.
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
depends on COMEDI_NI_COMMON
depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments AT-A2150 cards
To compile this driver as a module, choose M here: the module will be
called ni_at_a2150.
config COMEDI_NI_AT_AO
tristate "NI AT-AO-6/10 EISA card support"
depends on COMEDI_NI_COMMON
default N
---help---
Enable support for National Instruments AT-AO-6/10 cards
To compile this driver as a module, choose M here: the module will be
called ni_at_ao.
config COMEDI_NI_ATMIO
tristate "NI AT-MIO E series ISA-PNP card support"
depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
select COMEDI_8255
default N
---help---
Enable support for National Instruments AT-MIO E series cards
National Instruments AT-MIO-16E-1 (ni_atmio),
AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
To compile this driver as a module, choose M here: the module will be
called ni_atmio.
config COMEDI_NI_ATMIO16D
tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
depends on ISAPNP && COMEDI_NI_COMMON
select COMEDI_8255
default N
---help---
Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
To compile this driver as a module, choose M here: the module will be
called ni_atmio16d.
config COMEDI_PCMAD
tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
default N
---help---
Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
To compile this driver as a module, choose M here: the module will be
called pcmad.
config COMEDI_PCMDA12
tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
default N
---help---
Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
Note that the board is not ISA-PNP capable and thus needs the I/O
port comedi_config parameter.
To compile this driver as a module, choose M here: the module will be
called pcmda12.
config COMEDI_PCMMIO
tristate "Winsystems PCM-MIO PC/104 board support"
default N
---help---
Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
To compile this driver as a module, choose M here: the module will be
called pcmmio.
config COMEDI_PCMUIO
tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
default N
---help---
Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
To compile this driver as a module, choose M here: the module will be
called pcmuio.
config COMEDI_MULTIQ3
tristate "Quanser Consulting MultiQ-3 ISA card support"
default N
---help---
Enable support for Quanser Consulting MultiQ-3 ISA cards
To compile this driver as a module, choose M here: the module will be
called multiq3.
config COMEDI_POC
tristate "Generic driver for very simple devices"
default N
---help---
Enable generic support for very simple / POC (Piece of Crap) boards,
Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
PCL-734 (pcl734)
To compile this driver as a module, choose M here: the module will be
called poc.
endif # COMEDI_ISA_DRIVERS
menuconfig COMEDI_PCI_DRIVERS
tristate "Comedi PCI drivers"
depends on COMEDI && PCI
default N
---help---
Enable comedi PCI drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about PCI comedi drivers.
if COMEDI_PCI_DRIVERS && PCI
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_035 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_035.
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1032 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1032.
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1500 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1500.
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI_1516 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1516 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1516.
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1564 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_1564.
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_16xx cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_16xx.
config COMEDI_ADDI_APCI_2016
tristate "ADDI-DATA APCI_2016 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2016 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_2016.
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2032 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_2032.
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2200 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_2200.
config COMEDI_ADDI_APCI_3001
tristate "ADDI-DATA APCI_3001 support"
depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
Enable support for ADDI-DATA APCI_3001 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3001.
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3520 support"
depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
Enable support for ADDI-DATA APCI_3520 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3120.
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3501 cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3501.
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3xxx cards
To compile this driver as a module, choose M here: the module will be
called addi_apci_3xxx.
config COMEDI_ADL_PCI6208
tristate "ADLink PCI-6208A support"
select COMEDI_8255
default N
---help---
Enable support for ADLink PCI-6208A cards
To compile this driver as a module, choose M here: the module will be
called adl_pci6208.
config COMEDI_ADL_PCI7230
tristate "ADLink PCI-7230 digital io board support"
default N
---help---
Enable support for ADlink PCI-7230 digital io board support
To compile this driver as a module, choose M here: the module will be
called adl_pci7230.
config COMEDI_ADL_PCI7296
tristate "ADLink PCI-7296 96 ch. digital io board support"
default N
---help---
Enable support for ADlink PCI-7296 96 ch. digital io board support
To compile this driver as a module, choose M here: the module will be
called adl_pci7296.
config COMEDI_ADL_PCI7432
tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
default N
---help---
Enable support for ADlink PCI-7432 64 ch. isolated digital io board
To compile this driver as a module, choose M here: the module will be
called adl_pci7432.
config COMEDI_ADL_PCI8164
tristate "ADLink PCI-8164 4 Axes Motion Control board support"
default N
---help---
Enable support for ADlink PCI-8164 4 Axes Motion Control board
To compile this driver as a module, choose M here: the module will be
called adl_pci8164.
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
select COMEDI_FC
default N
---help---
Enable support for ADlink PCI9111 cards
To compile this driver as a module, choose M here: the module will be
called adl_pci9111.
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
select COMEDI_FC
depends on VIRT_TO_BUS
default N
---help---
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
To compile this driver as a module, choose M here: the module will be
called adl_pci9118.
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
default N
---help---
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
PCI-1713, PCI-1720 and PCI-1731
To compile this driver as a module, choose M here: the module will be
called adv_pci1710.
config COMEDI_ADV_PCI1723
tristate "Advantech PCI-1723 support"
default N
---help---
Enable support for Advantech PCI-1723 cards
To compile this driver as a module, choose M here: the module will be
called adv_pci1723.
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
select COMEDI_8255
default N
---help---
Enable support for Advantech PCI DIO cards
PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751,
PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762
To compile this driver as a module, choose M here: the module will be
called adv_pci_dio.
config COMEDI_AMPLC_DIO200
tristate "Amplicon PC272E and PCI272 DIO board support"
select COMEDI_8255
default N
---help---
Enable support for Amplicon PC272E and PCI272 DIO boards
To compile this driver as a module, choose M here: the module will be
called amplc_dio200.
config COMEDI_AMPLC_PC236
tristate "Amplicon PC36AT and PCI236 DIO board support"
select COMEDI_8255
default N
---help---
Enable support for Amplicon PC36AT and PCI236 DIO boards
To compile this driver as a module, choose M here: the module will be
called amplc_pc236.
config COMEDI_AMPLC_PC263
tristate "Amplicon PC263 and PCI263 relay board support"
default N
---help---
Enable support for Amplicon PC263 and PCI263 relay boards
To compile this driver as a module, choose M here: the module will be
called amplc_pc263.
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
select COMEDI_FC
default N
---help---
Enable support for Amplicon PCI224 and PCI234 AO boards
To compile this driver as a module, choose M here: the module will be
called amplc_pci224.
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
select COMEDI_8255
default N
---help---
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
boards
To compile this driver as a module, choose M here: the module will be
called amplc_pci230.
config COMEDI_CONTEC_PCI_DIO
tristate "Contec PIO1616L digital I/O board support"
default N
---help---
Enable support for the Contec PIO1616L digital I/O board
To compile this driver as a module, choose M here: the module will be
called contec_pci_dio.
config COMEDI_DT3000
tristate "Data Translation DT3000 series support"
default N
---help---
Enable support for Data Translation DT3000 series
DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
DT3004-200
To compile this driver as a module, choose M here: the module will be
called dt3000.
config COMEDI_UNIOXX5
tristate "Fastwel UNIOxx-5 analog and digital io board support"
default N
---help---
Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
To compile this driver as a module, choose M here: the module will be
called unioxx5.
config COMEDI_GSC_HPDI
tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
select COMEDI_FC
default N
---help---
Enable support for General Standards Corporation high speed parallel
digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
Only receive mode works, transmit not supported.
To compile this driver as a module, choose M here: the module will be
called gsc_hpdi.
config COMEDI_ICP_MULTI
tristate "Inova ICP_MULTI support"
default N
---help---
Enable support for Inova ICP_MULTI card
To compile this driver as a module, choose M here: the module will be
called icp_multi.
config COMEDI_II_PCI20KC
tristate "Intelligent Instruments PCI-20001C carrier support"
default N
---help---
Enable support for Intelligent Instruments PCI-20001C carrier
PCI-20001, PCI-20006 and PCI-20341
To compile this driver as a module, choose M here: the module will be
called ii_pci20kc.
config COMEDI_DAQBOARD2000
tristate "IOtech DAQboard/2000 support"
select COMEDI_8255
default N
---help---
Enable support for the IOtech DAQboard/2000
To compile this driver as a module, choose M here: the module will be
called daqboard2000.
config COMEDI_JR3_PCI
tristate "JR3/PCI force sensor board support"
default N
---help---
Enable support for JR3/PCI force sensor boards
To compile this driver as a module, choose M here: the module will be
called jr3_pci.
config COMEDI_KE_COUNTER
tristate "Kolter-Electronic PCI Counter 1 card support"
default N
---help---
Enable support for Kolter-Electronic PCI Counter 1 cards
To compile this driver as a module, choose M here: the module will be
called ke_counter.
config COMEDI_CB_PCIDAS64
tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
select COMEDI_8255
select COMEDI_FC
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
60xx, and 4020 series with the PLX 9080 PCI controller
To compile this driver as a module, choose M here: the module will be
called cb_pcidas64.
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
select COMEDI_8255
select COMEDI_FC
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
and PCI_DAS1002.
To compile this driver as a module, choose M here: the module will be
called cb_pcidas.
config COMEDI_CB_PCIDDA
tristate "MeasurementComputing PCI-DDA series support"
select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DDA
series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
PCI-DDA04/16 and PCI-DDA02/16
To compile this driver as a module, choose M here: the module will be
called cb_pcidda.
config COMEDI_CB_PCIDIO
tristate "MeasurementComputing PCI-DIO series support"
select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
PCI-DIO24, PCI-DIO24H and PCI-DIO48H
To compile this driver as a module, choose M here: the module will be
called cb_pcidio.
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16 support"
select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCI Migration
series PCIM-DAS1602/16
To compile this driver as a module, choose M here: the module will be
called cb_pcimdas.
config COMEDI_CB_PCIMDDA
tristate "MeasurementComputing PCIM-DDA06-16 support"
select COMEDI_8255
default N
---help---
Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
To compile this driver as a module, choose M here: the module will be
called cb_pcimdda.
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
default N
---help---
Enable support for Meilhaus PCI data acquisition cards
ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
To compile this driver as a module, choose M here: the module will be
called me4000.
config COMEDI_ME_DAQ
tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
default N
---help---
Enable support for Meilhaus PCI data acquisition cards
ME-2000i, ME-2600i and ME-3000vm1
To compile this driver as a module, choose M here: the module will be
called me_daq.
config COMEDI_NI_6527
tristate "NI 6527 support"
depends on COMEDI_MITE
default N
---help---
Enable support for the National Instruments 6527 PCI card
To compile this driver as a module, choose M here: the module will be
called ni_6527.
config COMEDI_NI_65XX
tristate "NI 65xx static dio PCI card support"
depends on COMEDI_MITE
default N
---help---
Enable support for National Instruments 65xx static dio boards.
Supported devices: National Instruments PCI-6509 (ni_65xx),
PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
To compile this driver as a module, choose M here: the module will be
called ni_65xx.
config COMEDI_NI_660X
tristate "NI 660x counter/timer PCI card support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
default N
---help---
Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
PXI-6602 and PXI-6608.
To compile this driver as a module, choose M here: the module will be
called ni_660x.
config COMEDI_NI_670X
tristate "NI 670x PCI card support"
depends on COMEDI_MITE
default N
---help---
Enable support for National Instruments PCI-6703 and PCI-6704
To compile this driver as a module, choose M here: the module will be
called ni_670x.
config COMEDI_NI_PCIDIO
tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
depends on COMEDI_MITE
select COMEDI_8255
default N
---help---
Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
PXI-6503, PCI-6533 and PCI-6534
The DIO-96 appears as four 8255 subdevices. See the 8255
driver notes for details.
To compile this driver as a module, choose M here: the module will be
called ni_pcidio.
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
select COMEDI_8255
select COMEDI_FC
default N
---help---
Enable support for National Instruments PCI-MIO-E series and M series
(all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
To compile this driver as a module, choose M here: the module will be
called ni_pcimio.
config COMEDI_RTD520
tristate "Real Time Devices PCI4520/DM7520 support"
select COMEDI_8255
default N
---help---
Enable support for Real Time Devices PCI4520/DM7520
To compile this driver as a module, choose M here: the module will be
called rtd520.
config COMEDI_S526
tristate "Sensoray s526 support"
default N
---help---
Enable support for Sensoray s526
To compile this driver as a module, choose M here: the module will be
called s526.
config COMEDI_S626
tristate "Sensoray 626 support"
select COMEDI_FC
default N
---help---
Enable support for Sensoray 626
To compile this driver as a module, choose M here: the module will be
called s626.
config COMEDI_SSV_DNP
tristate "SSV Embedded Systems DIL/Net-PC support"
default N
---help---
Enable support for SSV Embedded Systems DIL/Net-PC
To compile this driver as a module, choose M here: the module will be
called ssv_dnp.
endif # COMEDI_PCI_DRIVERS
menuconfig COMEDI_PCMCIA_DRIVERS
tristate "Comedi PCMCIA drivers"
depends on COMEDI && (PCMCIA || PCCARD)
default N
---help---
Enable comedi PCMCIA and PCCARD drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about PCMCIA comedi drivers.
if COMEDI_PCMCIA_DRIVERS && PCMCIA
config COMEDI_CB_DAS16_CS
tristate "CB DAS16 series PCMCIA support"
default N
---help---
Enable support for the ComputerBoards/MeasurementComputing PCMCIA
cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
To compile this driver as a module, choose M here: the module will be
called cb_das16_cs.
config COMEDI_DAS08_CS
tristate "CB DAS08 PCMCIA support"
select COMEDI_DAS08
default N
---help---
Enable support for the ComputerBoards/MeasurementComputing DAS-08
PCMCIA card
To compile this driver as a module, choose M here: the module will be
called das08_cs.
config COMEDI_NI_DAQ_700_CS
tristate "NI DAQCard-700 PCMCIA support"
depends on COMEDI_NI_COMMON
default N
---help---
Enable support for the National Instruments PCMCIA DAQCard-700 DIO
To compile this driver as a module, choose M here: the module will be
called ni_daq_700.
config COMEDI_NI_DAQ_DIO24_CS
tristate "NI DAQ-Card DIO-24 PCMCIA support"
depends on COMEDI_NI_COMMON
select COMEDI_8255
default N
---help---
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
To compile this driver as a module, choose M here: the module will be
called ni_daq_dio24.
config COMEDI_NI_LABPC_CS
tristate "NI DAQCard-1200 PCMCIA support"
depends on COMEDI_NI_LABPC
default N
---help---
Enable support for the National Instruments PCMCIA DAQCard-1200
To compile this driver as a module, choose M here: the module will be
called ni_labpc_cs.
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
select COMEDI_8255
select COMEDI_FC
default N
---help---
Enable support for the National Instruments PCMCIA DAQCard E series
DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
and DAQCard-6036E
To compile this driver as a module, choose M here: the module will be
called ni_mio_cs.
config COMEDI_QUATECH_DAQP_CS
tristate "Quatech DAQP PCMCIA data capture card support"
default N
---help---
Enable support for the Quatech DAQP PCMCIA data capture cards
DAQP-208 and DAQP-308
To compile this driver as a module, choose M here: the module will be
called quatech_daqp_cs.
endif # COMEDI_PCMCIA_DRIVERS
menuconfig COMEDI_USB_DRIVERS
tristate "Comedi USB drivers"
depends on COMEDI && USB
default N
---help---
Enable comedi USB drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about USB comedi drivers.
if COMEDI_USB_DRIVERS && USB
config COMEDI_DT9812
tristate "DataTranslation DT9812 USB module support"
default N
---help---
Enable support for the Data Translation DT9812 USB module
To compile this driver as a module, choose M here: the module will be
called dt9812.
config COMEDI_USBDUX
tristate "ITL USBDUX support"
default N
---help---
Enable support for the University of Stirling USB DAQ and INCITE
Technology Limited driver
To compile this driver as a module, choose M here: the module will be
called usbdux.
config COMEDI_USBDUXFAST
tristate "ITL USB-DUXfast support"
select COMEDI_FC
default N
---help---
Enable support for the University of Stirling USB-DUXfast and INCITE
Technology Limited driver
To compile this driver as a module, choose M here: the module will be
called usbduxfast.
config COMEDI_VMK80XX
tristate "Velleman VM110/VM140 USB Board support"
default N
---help---
Build the Velleman USB Board Low-Level Driver supporting the
K8055/K8061 aka VM110/VM140 devices
To compile this driver as a module, choose M here: the module will be
called vmk80xx.
endif # COMEDI_USB_DRIVERS
menuconfig COMEDI_NI_COMMON
tristate "Comedi National Instruments card support"
depends on COMEDI
default N
---help---
Enable comedi support for National Instruments cards.
Modules in this section are used by many comedi NI drivers.
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about National Instruments cards.
if COMEDI_NI_COMMON
config COMEDI_MITE
tristate "NI Mite PCI interface chip support"
depends on PCI
default N
---help---
Enable support for National Instruments Mite PCI interface chip
To compile this driver as a module, choose M here: the module will be
called mite.
config COMEDI_NI_TIO
tristate "NI general purpose counter support"
depends on COMEDI_MITE
default N
---help---
Enable support for National Instruments general purpose counters.
This module is not used directly by end-users. Rather, it
is used by other drivers (for example ni_660x and ni_pcimio)
to provide support for NI's general purpose counters.
To compile this driver as a modules, choose M here: two modules will
be build: ni_tio and ni_tiocmd.
config COMEDI_NI_LABPC
tristate "NI Lab-PC and compatibles ISA and PCI support"
depends on COMEDI_MITE
select COMEDI_8255
select COMEDI_FC
depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments Lab-PC and compatibles
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
not yet been added to the driver.
To compile this driver as a module, choose M here: the module will be
called ni_labpc.
endif # COMEDI_NI_COMMON
config COMEDI_8255
tristate "Generic 8255 support"
depends on COMEDI
default N
---help---
Enable generic 8255 support.
You should enable compilation this driver if you plan to use a board
that has an 8255 chip. For multifunction boards, the main driver will
configure the 8255 subdevice automatically.
Note that most PCI 8255 boards do NOT work with this driver, and
need a separate driver as a wrapper.
To compile this driver as a module, choose M here: the module will be
called 8255.
config COMEDI_DAS08
tristate "DAS-08 compatible support"
depends on COMEDI
select COMEDI_8255
default N
---help---
Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
Note that PCMCIA DAS08 cards are not directly supported by this
driver, and need a separate driver as a wrapper.
To compile this driver as a module, choose M here: the module will be
called das08.
config COMEDI_FC
tristate "Comedi shared functions for low-level driver support"
depends on COMEDI
default N
---help---
Enable support for shared functions for low-level drivers.
This module is not used directly by end-users. Rather, it
is used by many other comedi drivers.
To compile this driver as a module, choose M here: the module will be
called comedi_fc.