| /* DVB USB compliant linux driver for Conexant USB reference design. |
| * |
| * The Conexant reference design I saw on their website was only for analogue |
| * capturing (using the cx25842). The box I took to write this driver (reverse |
| * engineered) is the one labeled Medion MD95700. In addition to the cx25842 |
| * for analogue capturing it also has a cx22702 DVB-T demodulator on the main |
| * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. |
| * |
| * Maybe it is a little bit premature to call this driver cxusb, but I assume |
| * the USB protocol is identical or at least inherited from the reference |
| * design, so it can be reused for the "analogue-only" device (if it will |
| * appear at all). |
| * |
| * TODO: check if the cx25840-driver (from ivtv) can be used for the analogue |
| * part |
| * |
| * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * see Documentation/dvb/README.dvb-usb for more information |
| */ |
| #include "cxusb.h" |
| |
| #include "cx22702.h" |
| |
| /* debug */ |
| int dvb_usb_cxusb_debug; |
| module_param_named(debug,dvb_usb_cxusb_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); |
| |
| static int cxusb_ctrl_msg(struct dvb_usb_device *d, |
| u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) |
| { |
| int wo = (rbuf == NULL || rlen == 0); /* write-only */ |
| u8 sndbuf[1+wlen]; |
| memset(sndbuf,0,1+wlen); |
| |
| sndbuf[0] = cmd; |
| memcpy(&sndbuf[1],wbuf,wlen); |
| if (wo) |
| dvb_usb_generic_write(d,sndbuf,1+wlen); |
| else |
| dvb_usb_generic_rw(d,sndbuf,1+wlen,rbuf,rlen,0); |
| |
| return 0; |
| } |
| |
| /* I2C */ |
| static void cxusb_set_i2c_path(struct dvb_usb_device *d, enum cxusb_i2c_pathes path) |
| { |
| struct cxusb_state *st = d->priv; |
| u8 o[2],i; |
| |
| if (path == st->cur_i2c_path) |
| return; |
| |
| o[0] = IOCTL_SET_I2C_PATH; |
| switch (path) { |
| case PATH_CX22702: |
| o[1] = 0; |
| break; |
| case PATH_TUNER_OTHER: |
| o[1] = 1; |
| break; |
| default: |
| err("unkown i2c path"); |
| return; |
| } |
| cxusb_ctrl_msg(d,CMD_IOCTL,o,2,&i,1); |
| |
| if (i != 0x01) |
| deb_info("i2c_path setting failed.\n"); |
| |
| st->cur_i2c_path = path; |
| } |
| |
| static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) |
| { |
| struct dvb_usb_device *d = i2c_get_adapdata(adap); |
| int i; |
| |
| if (down_interruptible(&d->i2c_sem) < 0) |
| return -EAGAIN; |
| |
| if (num > 2) |
| warn("more than 2 i2c messages at a time is not handled yet. TODO."); |
| |
| for (i = 0; i < num; i++) { |
| |
| switch (msg[i].addr) { |
| case 0x63: |
| cxusb_set_i2c_path(d,PATH_CX22702); |
| break; |
| default: |
| cxusb_set_i2c_path(d,PATH_TUNER_OTHER); |
| break; |
| } |
| |
| /* read request */ |
| if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { |
| u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; |
| obuf[0] = msg[i].len; |
| obuf[1] = msg[i+1].len; |
| obuf[2] = msg[i].addr; |
| memcpy(&obuf[3],msg[i].buf,msg[i].len); |
| |
| if (cxusb_ctrl_msg(d, CMD_I2C_READ, |
| obuf, 3+msg[i].len, |
| ibuf, 1+msg[i+1].len) < 0) |
| break; |
| |
| if (ibuf[0] != 0x08) |
| deb_info("i2c read could have been failed\n"); |
| |
| memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len); |
| |
| i++; |
| } else { /* write */ |
| u8 obuf[2+msg[i].len], ibuf; |
| obuf[0] = msg[i].addr; |
| obuf[1] = msg[i].len; |
| memcpy(&obuf[2],msg[i].buf,msg[i].len); |
| |
| if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0) |
| break; |
| if (ibuf != 0x08) |
| deb_info("i2c write could have been failed\n"); |
| } |
| } |
| |
| up(&d->i2c_sem); |
| return i; |
| } |
| |
| static u32 cxusb_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm cxusb_i2c_algo = { |
| .name = "Conexant USB I2C algorithm", |
| .id = I2C_ALGO_BIT, |
| .master_xfer = cxusb_i2c_xfer, |
| .functionality = cxusb_i2c_func, |
| }; |
| |
| static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| return 0; |
| } |
| |
| static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff) |
| { |
| u8 buf[2] = { 0x03, 0x00 }; |
| if (onoff) |
| cxusb_ctrl_msg(d,0x36, buf, 2, NULL, 0); |
| else |
| cxusb_ctrl_msg(d,0x37, NULL, 0, NULL, 0); |
| |
| return 0; |
| } |
| |
| struct cx22702_config cxusb_cx22702_config = { |
| .demod_address = 0x63, |
| |
| .output_mode = CX22702_PARALLEL_OUTPUT, |
| |
| .pll_init = dvb_usb_pll_init_i2c, |
| .pll_set = dvb_usb_pll_set_i2c, |
| }; |
| |
| /* Callbacks for DVB USB */ |
| static int cxusb_tuner_attach(struct dvb_usb_device *d) |
| { |
| u8 bpll[4] = { 0x0b, 0xdc, 0x9c, 0xa0 }; |
| d->pll_addr = 0x61; |
| memcpy(d->pll_init,bpll,4); |
| d->pll_desc = &dvb_pll_fmd1216me; |
| return 0; |
| } |
| |
| static int cxusb_frontend_attach(struct dvb_usb_device *d) |
| { |
| u8 buf[2] = { 0x03, 0x00 }; |
| u8 b = 0; |
| |
| if (usb_set_interface(d->udev,0,0) < 0) |
| err("set interface to alts=0 failed"); |
| |
| cxusb_ctrl_msg(d,0xde,&b,0,NULL,0); |
| cxusb_set_i2c_path(d,PATH_TUNER_OTHER); |
| cxusb_ctrl_msg(d,CMD_POWER_OFF, NULL, 0, &b, 1); |
| |
| if (usb_set_interface(d->udev,0,6) < 0) |
| err("set interface failed"); |
| |
| cxusb_ctrl_msg(d,0x36, buf, 2, NULL, 0); |
| cxusb_set_i2c_path(d,PATH_CX22702); |
| cxusb_ctrl_msg(d,CMD_POWER_ON, NULL, 0, &b, 1); |
| |
| if ((d->fe = cx22702_attach(&cxusb_cx22702_config, &d->i2c_adap)) != NULL) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| /* DVB USB Driver stuff */ |
| static struct dvb_usb_properties cxusb_properties; |
| |
| static int cxusb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return dvb_usb_device_init(intf,&cxusb_properties,THIS_MODULE); |
| } |
| |
| static struct usb_device_id cxusb_table [] = { |
| { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, |
| {} /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE (usb, cxusb_table); |
| |
| static struct dvb_usb_properties cxusb_properties = { |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, |
| |
| .usb_ctrl = CYPRESS_FX2, |
| |
| .size_of_priv = sizeof(struct cxusb_state), |
| |
| .streaming_ctrl = cxusb_streaming_ctrl, |
| .power_ctrl = cxusb_power_ctrl, |
| .frontend_attach = cxusb_frontend_attach, |
| .tuner_attach = cxusb_tuner_attach, |
| |
| .i2c_algo = &cxusb_i2c_algo, |
| |
| .generic_bulk_ctrl_endpoint = 0x01, |
| /* parameter for the MPEG2-data transfer */ |
| .urb = { |
| .type = DVB_USB_ISOC, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .isoc = { |
| .framesperurb = 32, |
| .framesize = 940, |
| .interval = 5, |
| } |
| } |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "Medion MD95700 (MDUSBTV-HYBRID)", |
| { NULL }, |
| { &cxusb_table[0], NULL }, |
| }, |
| } |
| }; |
| |
| static struct usb_driver cxusb_driver = { |
| .owner = THIS_MODULE, |
| .name = "dvb_usb_cxusb", |
| .probe = cxusb_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = cxusb_table, |
| }; |
| |
| /* module stuff */ |
| static int __init cxusb_module_init(void) |
| { |
| int result; |
| if ((result = usb_register(&cxusb_driver))) { |
| err("usb_register failed. Error number %d",result); |
| return result; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit cxusb_module_exit(void) |
| { |
| /* deregister this driver from the USB subsystem */ |
| usb_deregister(&cxusb_driver); |
| } |
| |
| module_init (cxusb_module_init); |
| module_exit (cxusb_module_exit); |
| |
| MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); |
| MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); |
| MODULE_VERSION("1.0-alpha"); |
| MODULE_LICENSE("GPL"); |