arch/ppc/syslib/pci_auto.c - kernel/msm-4.9 - Gitiles

 /*
  * arch/ppc/syslib/pci_auto.c
  *
  * PCI autoconfiguration library
  *
  * Author: Matt Porter <mporter@mvista.com>
  *
  * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */

 /*
  * The CardBus support is very preliminary.  Preallocating space is
  * the way to go but will require some change in card services to
  * make it useful.  Eventually this will ensure that we can put
  * multiple CB bridges behind multiple P2P bridges.  For now, at
  * least it ensures that we place the CB bridge BAR and assigned
  * initial bus numbers.  I definitely need to do something about
  * the lack of 16-bit I/O support. -MDP
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>

 #include <asm/pci-bridge.h>

 #define	PCIAUTO_IDE_MODE_MASK		0x05

 #undef DEBUG

 #ifdef DEBUG
 #define DBG(x...) printk(x)
 #else
 #define DBG(x...)
 #endif /* DEBUG */

 static int pciauto_upper_iospc;
 static int pciauto_upper_memspc;

 void __init pciauto_setup_bars(struct pci_controller *hose,
 		int current_bus,
 		int pci_devfn,
 		int bar_limit)
 {
 	int bar_response, bar_size, bar_value;
 	int bar, addr_mask;
 	int * upper_limit;
 	int found_mem64 = 0;

 	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
 		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );

 	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
 		/* Tickle the BAR and get the response */
 		early_write_config_dword(hose,
 				current_bus,
 				pci_devfn,
 				bar,
 				0xffffffff);
 		early_read_config_dword(hose,
 				current_bus,
 				pci_devfn,
 				bar,
 				&bar_response);

 		/* If BAR is not implemented go to the next BAR */
 		if (!bar_response)
 			continue;

 		/* Check the BAR type and set our address mask */
 		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
 			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
 			upper_limit = &pciauto_upper_iospc;
 			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
 		} else {
 			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
 			PCI_BASE_ADDRESS_MEM_TYPE_64)
 				found_mem64 = 1;

 			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
 			upper_limit = &pciauto_upper_memspc;
 			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
 		}

 		/* Calculate requested size */
 		bar_size = ~(bar_response & addr_mask) + 1;

 		/* Allocate a base address */
 		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);

 		/* Write it out and update our limit */
 		early_write_config_dword(hose,
 				current_bus,
 				pci_devfn,
 				bar,
 				bar_value);

 		*upper_limit = bar_value;

 		/*
 		 * If we are a 64-bit decoder then increment to the
 		 * upper 32 bits of the bar and force it to locate
 		 * in the lower 4GB of memory.
 		 */
 		if (found_mem64) {
 			bar += 4;
 			early_write_config_dword(hose,
 					current_bus,
 					pci_devfn,
 					bar,
 					0x00000000);
 			found_mem64 = 0;
 		}

 		DBG("size=0x%x, address=0x%x\n",
 			bar_size, bar_value);
 	}

 }

 void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
 		int current_bus,
 		int pci_devfn,
 		int sub_bus,
 		int *iosave,
 		int *memsave)
 {
 	/* Configure bus number registers */
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_PRIMARY_BUS,
 			current_bus);
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_SECONDARY_BUS,
 			sub_bus + 1);
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_SUBORDINATE_BUS,
 			0xff);

 	/* Round memory allocator to 1MB boundary */
 	pciauto_upper_memspc &= ~(0x100000 - 1);
 	*memsave = pciauto_upper_memspc;

 	/* Round I/O allocator to 4KB boundary */
 	pciauto_upper_iospc &= ~(0x1000 - 1);
 	*iosave = pciauto_upper_iospc;

 	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
 	early_write_config_word(hose,
 			current_bus,
 			pci_devfn,
 			PCI_MEMORY_LIMIT,
 			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_IO_LIMIT,
 			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
 	early_write_config_word(hose,
 			current_bus,
 			pci_devfn,
 			PCI_IO_LIMIT_UPPER16,
 			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);

 	/* Zero upper 32 bits of prefetchable base/limit */
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			PCI_PREF_BASE_UPPER32,
 			0);
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			PCI_PREF_LIMIT_UPPER32,
 			0);
 }

 void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
 		int current_bus,
 		int pci_devfn,
 		int sub_bus,
 		int *iosave,
 		int *memsave)
 {
 	int cmdstat;

 	/* Configure bus number registers */
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_SUBORDINATE_BUS,
 			sub_bus);

 	/*
 	 * Round memory allocator to 1MB boundary.
 	 * If no space used, allocate minimum.
 	 */
 	pciauto_upper_memspc &= ~(0x100000 - 1);
 	if (*memsave == pciauto_upper_memspc)
 		pciauto_upper_memspc -= 0x00100000;

 	early_write_config_word(hose,
 			current_bus,
 			pci_devfn,
 			PCI_MEMORY_BASE,
 			pciauto_upper_memspc >> 16);

 	/* Allocate 1MB for pre-fretch */
 	early_write_config_word(hose,
 			current_bus,
 			pci_devfn,
 			PCI_PREF_MEMORY_LIMIT,
 			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);

 	pciauto_upper_memspc -= 0x100000;

 	early_write_config_word(hose,
 			current_bus,
 			pci_devfn,
 			PCI_PREF_MEMORY_BASE,
 			pciauto_upper_memspc >> 16);

 	/* Round I/O allocator to 4KB boundary */
 	pciauto_upper_iospc &= ~(0x1000 - 1);
 	if (*iosave == pciauto_upper_iospc)
 		pciauto_upper_iospc -= 0x1000;

 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_IO_BASE,
 			(pciauto_upper_iospc & 0x0000f000) >> 8);
 	early_write_config_word(hose,
 			current_bus,
 			pci_devfn,
 			PCI_IO_BASE_UPPER16,
 			pciauto_upper_iospc >> 16);

 	/* Enable memory and I/O accesses, enable bus master */
 	early_read_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			PCI_COMMAND,
 			&cmdstat);
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			PCI_COMMAND,
 			cmdstat |
 			PCI_COMMAND_IO |
 			PCI_COMMAND_MEMORY |
 			PCI_COMMAND_MASTER);
 }

 void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
 		int current_bus,
 		int pci_devfn,
 		int sub_bus,
 		int *iosave,
 		int *memsave)
 {
 	/* Configure bus number registers */
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_PRIMARY_BUS,
 			current_bus);
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_SECONDARY_BUS,
 			sub_bus + 1);
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_SUBORDINATE_BUS,
 			0xff);

 	/* Round memory allocator to 4KB boundary */
 	pciauto_upper_memspc &= ~(0x1000 - 1);
 	*memsave = pciauto_upper_memspc;

 	/* Round I/O allocator to 4 byte boundary */
 	pciauto_upper_iospc &= ~(0x4 - 1);
 	*iosave = pciauto_upper_iospc;

 	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			0x20,
 			pciauto_upper_memspc - 1);
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			0x30,
 			pciauto_upper_iospc - 1);
 }

 void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
 		int current_bus,
 		int pci_devfn,
 		int sub_bus,
 		int *iosave,
 		int *memsave)
 {
 	int cmdstat;

 	/*
 	 * Configure subordinate bus number.  The PCI subsystem
 	 * bus scan will renumber buses (reserving three additional
 	 * for this PCI<->CardBus bridge for the case where a CardBus
 	 * adapter contains a P2P or CB2CB bridge.
 	 */
 	early_write_config_byte(hose,
 			current_bus,
 			pci_devfn,
 			PCI_SUBORDINATE_BUS,
 			sub_bus);

 	/*
 	 * Reserve an additional 4MB for mem space and 16KB for
 	 * I/O space.  This should cover any additional space
 	 * requirement of unusual CardBus devices with
 	 * additional bridges that can consume more address space.
 	 *
 	 * Although pcmcia-cs currently will reprogram bridge
 	 * windows, the goal is to add an option to leave them
 	 * alone and use the bridge window ranges as the regions
 	 * that are searched for free resources upon hot-insertion
 	 * of a device.  This will allow a PCI<->CardBus bridge
 	 * configured by this routine to happily live behind a
 	 * P2P bridge in a system.
 	 */
 	pciauto_upper_memspc -= 0x00400000;
 	pciauto_upper_iospc -= 0x00004000;

 	/* Round memory allocator to 4KB boundary */
 	pciauto_upper_memspc &= ~(0x1000 - 1);

 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			0x1c,
 			pciauto_upper_memspc);

 	/* Round I/O allocator to 4 byte boundary */
 	pciauto_upper_iospc &= ~(0x4 - 1);
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			0x2c,
 			pciauto_upper_iospc);

 	/* Enable memory and I/O accesses, enable bus master */
 	early_read_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			PCI_COMMAND,
 			&cmdstat);
 	early_write_config_dword(hose,
 			current_bus,
 			pci_devfn,
 			PCI_COMMAND,
 			cmdstat |
 			PCI_COMMAND_IO |
 			PCI_COMMAND_MEMORY |
 			PCI_COMMAND_MASTER);
 }

 int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
 {
 	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
 	unsigned short vid;
 	unsigned char header_type;

 	/*
 	 * Fetch our I/O and memory space upper boundaries used
 	 * to allocated base addresses on this hose.
 	 */
 	if (current_bus == hose->first_busno) {
 		pciauto_upper_iospc = hose->io_space.end + 1;
 		pciauto_upper_memspc = hose->mem_space.end + 1;
 	}

 	sub_bus = current_bus;

 	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
 		/* Skip our host bridge */
 		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
 			continue;

 		if (PCI_FUNC(pci_devfn) && !found_multi)
 			continue;

 		/* If config space read fails from this device, move on */
 		if (early_read_config_byte(hose,
 				current_bus,
 				pci_devfn,
 				PCI_HEADER_TYPE,
 				&header_type))
 			continue;

 		if (!PCI_FUNC(pci_devfn))
 			found_multi = header_type & 0x80;

 		early_read_config_word(hose,
 				current_bus,
 				pci_devfn,
 				PCI_VENDOR_ID,
 				&vid);

 		if (vid != 0xffff) {
 			early_read_config_dword(hose,
 					current_bus,
 					pci_devfn,
 					PCI_CLASS_REVISION, &pci_class);
 			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
 				int iosave, memsave;

 				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
 				/* Allocate PCI I/O and/or memory space */
 				pciauto_setup_bars(hose,
 						current_bus,
 						pci_devfn,
 						PCI_BASE_ADDRESS_1);

 				pciauto_prescan_setup_bridge(hose,
 						current_bus,
 						pci_devfn,
 						sub_bus,
 						&iosave,
 						&memsave);
 				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
 				pciauto_postscan_setup_bridge(hose,
 						current_bus,
 						pci_devfn,
 						sub_bus,
 						&iosave,
 						&memsave);
 			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
 				int iosave, memsave;

 				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
 				/* Place CardBus Socket/ExCA registers */
 				pciauto_setup_bars(hose,
 						current_bus,
 						pci_devfn,
 						PCI_BASE_ADDRESS_0);

 				pciauto_prescan_setup_cardbus_bridge(hose,
 						current_bus,
 						pci_devfn,
 						sub_bus,
 						&iosave,
 						&memsave);
 				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
 				pciauto_postscan_setup_cardbus_bridge(hose,
 						current_bus,
 						pci_devfn,
 						sub_bus,
 						&iosave,
 						&memsave);
 			} else {
 				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
 					unsigned char prg_iface;

 					early_read_config_byte(hose,
 							current_bus,
 							pci_devfn,
 							PCI_CLASS_PROG,
 							&prg_iface);
 					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
 						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
 						continue;
 					}
 				}
 				/* Allocate PCI I/O and/or memory space */
 				pciauto_setup_bars(hose,
 						current_bus,
 						pci_devfn,
 						PCI_BASE_ADDRESS_5);

 				/*
 				 * Enable some standard settings
 				 */
 				early_read_config_dword(hose,
 						current_bus,
 						pci_devfn,
 						PCI_COMMAND,
 						&cmdstat);
 				early_write_config_dword(hose,
 						current_bus,
 						pci_devfn,
 						PCI_COMMAND,
 						cmdstat |
 						PCI_COMMAND_IO |
 						PCI_COMMAND_MEMORY |
 						PCI_COMMAND_MASTER);
 				early_write_config_byte(hose,
 						current_bus,
 						pci_devfn,
 						PCI_LATENCY_TIMER,
 						0x80);
 			}
 		}
 	}
 	return sub_bus;
 }
	/*
	* arch/ppc/syslib/pci_auto.c
	*
	* PCI autoconfiguration library
	*
	* Author: Matt Porter <mporter@mvista.com>
	*
	* 2001 (c) MontaVista, Software, Inc. This file is licensed under
	* the terms of the GNU General Public License version 2. This program
	* is licensed "as is" without any warranty of any kind, whether express
	* or implied.
	*/

	/*
	* The CardBus support is very preliminary. Preallocating space is
	* the way to go but will require some change in card services to
	* make it useful. Eventually this will ensure that we can put
	* multiple CB bridges behind multiple P2P bridges. For now, at
	* least it ensures that we place the CB bridge BAR and assigned
	* initial bus numbers. I definitely need to do something about
	* the lack of 16-bit I/O support. -MDP
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/pci.h>

	#include <asm/pci-bridge.h>

	#define PCIAUTO_IDE_MODE_MASK 0x05

	#undef DEBUG

	#ifdef DEBUG
	#define DBG(x...) printk(x)
	#else
	#define DBG(x...)
	#endif /* DEBUG */

	static int pciauto_upper_iospc;
	static int pciauto_upper_memspc;

	void __init pciauto_setup_bars(struct pci_controller *hose,
	int current_bus,
	int pci_devfn,
	int bar_limit)
	{
	int bar_response, bar_size, bar_value;
	int bar, addr_mask;
	int * upper_limit;
	int found_mem64 = 0;

	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
	current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );

	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
	/* Tickle the BAR and get the response */
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	bar,
	0xffffffff);
	early_read_config_dword(hose,
	current_bus,
	pci_devfn,
	bar,
	&bar_response);

	/* If BAR is not implemented go to the next BAR */
	if (!bar_response)
	continue;

	/* Check the BAR type and set our address mask */
	if (bar_response & PCI_BASE_ADDRESS_SPACE) {
	addr_mask = PCI_BASE_ADDRESS_IO_MASK;
	upper_limit = &pciauto_upper_iospc;
	DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
	} else {
	if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
	PCI_BASE_ADDRESS_MEM_TYPE_64)
	found_mem64 = 1;

	addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
	upper_limit = &pciauto_upper_memspc;
	DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
	}

	/* Calculate requested size */
	bar_size = ~(bar_response & addr_mask) + 1;

	/* Allocate a base address */
	bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);

	/* Write it out and update our limit */
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	bar,
	bar_value);

	*upper_limit = bar_value;

	/*
	* If we are a 64-bit decoder then increment to the
	* upper 32 bits of the bar and force it to locate
	* in the lower 4GB of memory.
	*/
	if (found_mem64) {
	bar += 4;
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	bar,
	0x00000000);
	found_mem64 = 0;
	}

	DBG("size=0x%x, address=0x%x\n",
	bar_size, bar_value);
	}

	}

	void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
	int current_bus,
	int pci_devfn,
	int sub_bus,
	int *iosave,
	int *memsave)
	{
	/* Configure bus number registers */
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_PRIMARY_BUS,
	current_bus);
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_SECONDARY_BUS,
	sub_bus + 1);
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_SUBORDINATE_BUS,
	0xff);

	/* Round memory allocator to 1MB boundary */
	pciauto_upper_memspc &= ~(0x100000 - 1);
	*memsave = pciauto_upper_memspc;

	/* Round I/O allocator to 4KB boundary */
	pciauto_upper_iospc &= ~(0x1000 - 1);
	*iosave = pciauto_upper_iospc;

	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
	early_write_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_MEMORY_LIMIT,
	((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_IO_LIMIT,
	((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
	early_write_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_IO_LIMIT_UPPER16,
	((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);

	/* Zero upper 32 bits of prefetchable base/limit */
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_PREF_BASE_UPPER32,
	0);
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_PREF_LIMIT_UPPER32,
	0);
	}

	void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
	int current_bus,
	int pci_devfn,
	int sub_bus,
	int *iosave,
	int *memsave)
	{
	int cmdstat;

	/* Configure bus number registers */
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_SUBORDINATE_BUS,
	sub_bus);

	/*
	* Round memory allocator to 1MB boundary.
	* If no space used, allocate minimum.
	*/
	pciauto_upper_memspc &= ~(0x100000 - 1);
	if (*memsave == pciauto_upper_memspc)
	pciauto_upper_memspc -= 0x00100000;

	early_write_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_MEMORY_BASE,
	pciauto_upper_memspc >> 16);

	/* Allocate 1MB for pre-fretch */
	early_write_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_PREF_MEMORY_LIMIT,
	((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);

	pciauto_upper_memspc -= 0x100000;

	early_write_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_PREF_MEMORY_BASE,
	pciauto_upper_memspc >> 16);

	/* Round I/O allocator to 4KB boundary */
	pciauto_upper_iospc &= ~(0x1000 - 1);
	if (*iosave == pciauto_upper_iospc)
	pciauto_upper_iospc -= 0x1000;

	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_IO_BASE,
	(pciauto_upper_iospc & 0x0000f000) >> 8);
	early_write_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_IO_BASE_UPPER16,
	pciauto_upper_iospc >> 16);

	/* Enable memory and I/O accesses, enable bus master */
	early_read_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_COMMAND,
	&cmdstat);
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_COMMAND,
	cmdstat \|
	PCI_COMMAND_IO \|
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER);
	}

	void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
	int current_bus,
	int pci_devfn,
	int sub_bus,
	int *iosave,
	int *memsave)
	{
	/* Configure bus number registers */
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_PRIMARY_BUS,
	current_bus);
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_SECONDARY_BUS,
	sub_bus + 1);
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_SUBORDINATE_BUS,
	0xff);

	/* Round memory allocator to 4KB boundary */
	pciauto_upper_memspc &= ~(0x1000 - 1);
	*memsave = pciauto_upper_memspc;

	/* Round I/O allocator to 4 byte boundary */
	pciauto_upper_iospc &= ~(0x4 - 1);
	*iosave = pciauto_upper_iospc;

	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	0x20,
	pciauto_upper_memspc - 1);
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	0x30,
	pciauto_upper_iospc - 1);
	}

	void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
	int current_bus,
	int pci_devfn,
	int sub_bus,
	int *iosave,
	int *memsave)
	{
	int cmdstat;

	/*
	* Configure subordinate bus number. The PCI subsystem
	* bus scan will renumber buses (reserving three additional
	* for this PCI<->CardBus bridge for the case where a CardBus
	* adapter contains a P2P or CB2CB bridge.
	*/
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_SUBORDINATE_BUS,
	sub_bus);

	/*
	* Reserve an additional 4MB for mem space and 16KB for
	* I/O space. This should cover any additional space
	* requirement of unusual CardBus devices with
	* additional bridges that can consume more address space.
	*
	* Although pcmcia-cs currently will reprogram bridge
	* windows, the goal is to add an option to leave them
	* alone and use the bridge window ranges as the regions
	* that are searched for free resources upon hot-insertion
	* of a device. This will allow a PCI<->CardBus bridge
	* configured by this routine to happily live behind a
	* P2P bridge in a system.
	*/
	pciauto_upper_memspc -= 0x00400000;
	pciauto_upper_iospc -= 0x00004000;

	/* Round memory allocator to 4KB boundary */
	pciauto_upper_memspc &= ~(0x1000 - 1);

	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	0x1c,
	pciauto_upper_memspc);

	/* Round I/O allocator to 4 byte boundary */
	pciauto_upper_iospc &= ~(0x4 - 1);
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	0x2c,
	pciauto_upper_iospc);

	/* Enable memory and I/O accesses, enable bus master */
	early_read_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_COMMAND,
	&cmdstat);
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_COMMAND,
	cmdstat \|
	PCI_COMMAND_IO \|
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER);
	}

	int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
	{
	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
	unsigned short vid;
	unsigned char header_type;

	/*
	* Fetch our I/O and memory space upper boundaries used
	* to allocated base addresses on this hose.
	*/
	if (current_bus == hose->first_busno) {
	pciauto_upper_iospc = hose->io_space.end + 1;
	pciauto_upper_memspc = hose->mem_space.end + 1;
	}

	sub_bus = current_bus;

	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
	/* Skip our host bridge */
	if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
	continue;

	if (PCI_FUNC(pci_devfn) && !found_multi)
	continue;

	/* If config space read fails from this device, move on */
	if (early_read_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_HEADER_TYPE,
	&header_type))
	continue;

	if (!PCI_FUNC(pci_devfn))
	found_multi = header_type & 0x80;

	early_read_config_word(hose,
	current_bus,
	pci_devfn,
	PCI_VENDOR_ID,
	&vid);

	if (vid != 0xffff) {
	early_read_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_CLASS_REVISION, &pci_class);
	if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
	int iosave, memsave;

	DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
	/* Allocate PCI I/O and/or memory space */
	pciauto_setup_bars(hose,
	current_bus,
	pci_devfn,
	PCI_BASE_ADDRESS_1);

	pciauto_prescan_setup_bridge(hose,
	current_bus,
	pci_devfn,
	sub_bus,
	&iosave,
	&memsave);
	sub_bus = pciauto_bus_scan(hose, sub_bus+1);
	pciauto_postscan_setup_bridge(hose,
	current_bus,
	pci_devfn,
	sub_bus,
	&iosave,
	&memsave);
	} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
	int iosave, memsave;

	DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
	/* Place CardBus Socket/ExCA registers */
	pciauto_setup_bars(hose,
	current_bus,
	pci_devfn,
	PCI_BASE_ADDRESS_0);

	pciauto_prescan_setup_cardbus_bridge(hose,
	current_bus,
	pci_devfn,
	sub_bus,
	&iosave,
	&memsave);
	sub_bus = pciauto_bus_scan(hose, sub_bus+1);
	pciauto_postscan_setup_cardbus_bridge(hose,
	current_bus,
	pci_devfn,
	sub_bus,
	&iosave,
	&memsave);
	} else {
	if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
	unsigned char prg_iface;

	early_read_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_CLASS_PROG,
	&prg_iface);
	if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
	DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
	continue;
	}
	}
	/* Allocate PCI I/O and/or memory space */
	pciauto_setup_bars(hose,
	current_bus,
	pci_devfn,
	PCI_BASE_ADDRESS_5);

	/*
	* Enable some standard settings
	*/
	early_read_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_COMMAND,
	&cmdstat);
	early_write_config_dword(hose,
	current_bus,
	pci_devfn,
	PCI_COMMAND,
	cmdstat \|
	PCI_COMMAND_IO \|
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER);
	early_write_config_byte(hose,
	current_bus,
	pci_devfn,
	PCI_LATENCY_TIMER,
	0x80);
	}
	}
	}
	return sub_bus;
	}