| /* |
| * sound/gus_card.c |
| * |
| * Detection routine for the Gravis Ultrasound. |
| * |
| * Copyright (C) by Hannu Savolainen 1993-1997 |
| * |
| * |
| * Frank van de Pol : Fixed GUS MAX interrupt handling, enabled simultanious |
| * usage of CS4231A codec, GUS wave and MIDI for GUS MAX. |
| * Christoph Hellwig: Adapted to module_init/module_exit, simple cleanups. |
| * |
| * Status: |
| * Tested... |
| */ |
| |
| |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| |
| #include "sound_config.h" |
| |
| #include "gus.h" |
| #include "gus_hw.h" |
| |
| irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy); |
| |
| int gus_base = 0, gus_irq = 0, gus_dma = 0; |
| int gus_no_wave_dma = 0; |
| extern int gus_wave_volume; |
| extern int gus_pcm_volume; |
| extern int have_gus_max; |
| int gus_pnp_flag = 0; |
| #ifdef CONFIG_SOUND_GUS16 |
| static int db16; /* Has a Gus16 AD1848 on it */ |
| #endif |
| |
| static void __init attach_gus(struct address_info *hw_config) |
| { |
| gus_wave_init(hw_config); |
| |
| if (sound_alloc_dma(hw_config->dma, "GUS")) |
| printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma); |
| if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma) |
| if (sound_alloc_dma(hw_config->dma2, "GUS(2)")) |
| printk(KERN_ERR "gus_card.c: Can't allocate DMA channel %d\n", hw_config->dma2); |
| gus_midi_init(hw_config); |
| if(request_irq(hw_config->irq, gusintr, 0, "Gravis Ultrasound", hw_config)<0) |
| printk(KERN_ERR "gus_card.c: Unable to allocate IRQ %d\n", hw_config->irq); |
| |
| return; |
| } |
| |
| static int __init probe_gus(struct address_info *hw_config) |
| { |
| int irq; |
| int io_addr; |
| |
| if (hw_config->card_subtype == 1) |
| gus_pnp_flag = 1; |
| |
| irq = hw_config->irq; |
| |
| if (hw_config->card_subtype == 0) /* GUS/MAX/ACE */ |
| if (irq != 3 && irq != 5 && irq != 7 && irq != 9 && |
| irq != 11 && irq != 12 && irq != 15) |
| { |
| printk(KERN_ERR "GUS: Unsupported IRQ %d\n", irq); |
| return 0; |
| } |
| if (gus_wave_detect(hw_config->io_base)) |
| return 1; |
| |
| #ifndef EXCLUDE_GUS_IODETECT |
| |
| /* |
| * Look at the possible base addresses (0x2X0, X=1, 2, 3, 4, 5, 6) |
| */ |
| |
| for (io_addr = 0x210; io_addr <= 0x260; io_addr += 0x10) { |
| if (io_addr == hw_config->io_base) /* Already tested */ |
| continue; |
| if (gus_wave_detect(io_addr)) { |
| hw_config->io_base = io_addr; |
| return 1; |
| } |
| } |
| #endif |
| |
| printk("NO GUS card found !\n"); |
| return 0; |
| } |
| |
| static void __exit unload_gus(struct address_info *hw_config) |
| { |
| DDB(printk("unload_gus(%x)\n", hw_config->io_base)); |
| |
| gus_wave_unload(hw_config); |
| |
| release_region(hw_config->io_base, 16); |
| release_region(hw_config->io_base + 0x100, 12); /* 0x10c-> is MAX */ |
| free_irq(hw_config->irq, hw_config); |
| |
| sound_free_dma(hw_config->dma); |
| |
| if (hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma) |
| sound_free_dma(hw_config->dma2); |
| } |
| |
| irqreturn_t gusintr(int irq, void *dev_id, struct pt_regs *dummy) |
| { |
| unsigned char src; |
| extern int gus_timer_enabled; |
| int handled = 0; |
| |
| #ifdef CONFIG_SOUND_GUSMAX |
| if (have_gus_max) { |
| struct address_info *hw_config = dev_id; |
| adintr(irq, (void *)hw_config->slots[1], NULL); |
| } |
| #endif |
| #ifdef CONFIG_SOUND_GUS16 |
| if (db16) { |
| struct address_info *hw_config = dev_id; |
| adintr(irq, (void *)hw_config->slots[3], NULL); |
| } |
| #endif |
| |
| while (1) |
| { |
| if (!(src = inb(u_IrqStatus))) |
| break; |
| handled = 1; |
| if (src & DMA_TC_IRQ) |
| { |
| guswave_dma_irq(); |
| } |
| if (src & (MIDI_TX_IRQ | MIDI_RX_IRQ)) |
| { |
| gus_midi_interrupt(0); |
| } |
| if (src & (GF1_TIMER1_IRQ | GF1_TIMER2_IRQ)) |
| { |
| if (gus_timer_enabled) |
| sound_timer_interrupt(); |
| gus_write8(0x45, 0); /* Ack IRQ */ |
| gus_timer_command(4, 0x80); /* Reset IRQ flags */ |
| } |
| if (src & (WAVETABLE_IRQ | ENVELOPE_IRQ)) |
| gus_voice_irq(); |
| } |
| return IRQ_RETVAL(handled); |
| } |
| |
| /* |
| * Some extra code for the 16 bit sampling option |
| */ |
| |
| #ifdef CONFIG_SOUND_GUS16 |
| |
| static int __init init_gus_db16(struct address_info *hw_config) |
| { |
| struct resource *ports; |
| |
| ports = request_region(hw_config->io_base, 4, "ad1848"); |
| if (!ports) |
| return 0; |
| |
| if (!ad1848_detect(ports, NULL, hw_config->osp)) { |
| release_region(hw_config->io_base, 4); |
| return 0; |
| } |
| |
| gus_pcm_volume = 100; |
| gus_wave_volume = 90; |
| |
| hw_config->slots[3] = ad1848_init("GUS 16 bit sampling", ports, |
| hw_config->irq, |
| hw_config->dma, |
| hw_config->dma, 0, |
| hw_config->osp, |
| THIS_MODULE); |
| return 1; |
| } |
| |
| static void __exit unload_gus_db16(struct address_info *hw_config) |
| { |
| |
| ad1848_unload(hw_config->io_base, |
| hw_config->irq, |
| hw_config->dma, |
| hw_config->dma, 0); |
| sound_unload_audiodev(hw_config->slots[3]); |
| } |
| #endif |
| |
| #ifdef CONFIG_SOUND_GUS16 |
| static int gus16; |
| #endif |
| #ifdef CONFIG_SOUND_GUSMAX |
| static int no_wave_dma; /* Set if no dma is to be used for the |
| wave table (GF1 chip) */ |
| #endif |
| |
| |
| /* |
| * Note DMA2 of -1 has the right meaning in the GUS driver as well |
| * as here. |
| */ |
| |
| static struct address_info cfg; |
| |
| static int __initdata io = -1; |
| static int __initdata irq = -1; |
| static int __initdata dma = -1; |
| static int __initdata dma16 = -1; /* Set this for modules that need it */ |
| static int __initdata type = 0; /* 1 for PnP */ |
| |
| module_param(io, int, 0); |
| module_param(irq, int, 0); |
| module_param(dma, int, 0); |
| module_param(dma16, int, 0); |
| module_param(type, int, 0); |
| #ifdef CONFIG_SOUND_GUSMAX |
| module_param(no_wave_dma, int, 0); |
| #endif |
| #ifdef CONFIG_SOUND_GUS16 |
| module_param(db16, int, 0); |
| module_param(gus16, int, 0); |
| #endif |
| MODULE_LICENSE("GPL"); |
| |
| static int __init init_gus(void) |
| { |
| printk(KERN_INFO "Gravis Ultrasound audio driver Copyright (C) by Hannu Savolainen 1993-1996\n"); |
| |
| cfg.io_base = io; |
| cfg.irq = irq; |
| cfg.dma = dma; |
| cfg.dma2 = dma16; |
| cfg.card_subtype = type; |
| #ifdef CONFIG_SOUND_GUSMAX |
| gus_no_wave_dma = no_wave_dma; |
| #endif |
| |
| if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { |
| printk(KERN_ERR "I/O, IRQ, and DMA are mandatory\n"); |
| return -EINVAL; |
| } |
| |
| #ifdef CONFIG_SOUND_GUS16 |
| if (gus16 && init_gus_db16(&cfg)) |
| db16 = 1; |
| #endif |
| if (!probe_gus(&cfg)) |
| return -ENODEV; |
| attach_gus(&cfg); |
| |
| return 0; |
| } |
| |
| static void __exit cleanup_gus(void) |
| { |
| #ifdef CONFIG_SOUND_GUS16 |
| if (db16) |
| unload_gus_db16(&cfg); |
| #endif |
| unload_gus(&cfg); |
| } |
| |
| module_init(init_gus); |
| module_exit(cleanup_gus); |
| |
| #ifndef MODULE |
| static int __init setup_gus(char *str) |
| { |
| /* io, irq, dma, dma2 */ |
| int ints[5]; |
| |
| str = get_options(str, ARRAY_SIZE(ints), ints); |
| |
| io = ints[1]; |
| irq = ints[2]; |
| dma = ints[3]; |
| dma16 = ints[4]; |
| |
| return 1; |
| } |
| |
| __setup("gus=", setup_gus); |
| #endif |