| /* |
| * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved. |
| * Authors: Carsten Langgaard <carstenl@mips.com> |
| * Maciej W. Rozycki <macro@mips.com> |
| * |
| * ######################################################################## |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * ######################################################################## |
| * |
| * SAA9730 ethernet driver description. |
| * |
| */ |
| #ifndef _SAA9730_H |
| #define _SAA9730_H |
| |
| |
| /* Number of 6-byte entries in the CAM. */ |
| #define LAN_SAA9730_CAM_ENTRIES 10 |
| #define LAN_SAA9730_CAM_DWORDS ((LAN_SAA9730_CAM_ENTRIES*6)/4) |
| |
| /* TX and RX packet size: fixed to 2048 bytes, according to HW requirements. */ |
| #define LAN_SAA9730_PACKET_SIZE 2048 |
| |
| /* |
| * Number of TX buffers = number of RX buffers = 2, which is fixed according |
| * to HW requirements. |
| */ |
| #define LAN_SAA9730_BUFFERS 2 |
| |
| /* Number of RX packets per RX buffer. */ |
| #define LAN_SAA9730_RCV_Q_SIZE 15 |
| |
| /* Number of TX packets per TX buffer. */ |
| #define LAN_SAA9730_TXM_Q_SIZE 15 |
| |
| /* |
| * We get an interrupt for each LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD |
| * packets received. |
| * If however we receive less than LAN_SAA9730_DEFAULT_RCV_Q_INT_THRESHOLD |
| * packets, the hardware can timeout after a certain time and still tell |
| * us packets have arrived. |
| * The timeout value in unit of 32 PCI clocks (33Mhz). |
| * The value 200 approximates 0.0002 seconds. |
| */ |
| #define LAN_SAA9730_RCV_Q_INT_THRESHOLD 1 |
| #define LAN_SAA9730_DEFAULT_TIME_OUT_CNT 10 |
| |
| #define RXSF_NDIS 0 |
| #define RXSF_READY 2 |
| #define RXSF_HWDONE 3 |
| |
| #define TXSF_EMPTY 0 |
| #define TXSF_READY 2 |
| #define TXSF_HWDONE 3 |
| |
| #define LANEND_LITTLE 0 |
| #define LANEND_BIG_2143 1 |
| #define LANEND_BIG_4321 2 |
| |
| #define LANMB_ANY 0 |
| #define LANMB_8 1 |
| #define LANMB_32 2 |
| #define LANMB_64 3 |
| |
| #define MACCM_AUTOMATIC 0 |
| #define MACCM_10MB 1 |
| #define MACCM_MII 2 |
| |
| /* |
| * PHY definitions for Basic registers of QS6612 (used on MIPS ATLAS board) |
| */ |
| #define PHY_CONTROL 0x0 |
| #define PHY_STATUS 0x1 |
| #define PHY_STATUS_LINK_UP 0x4 |
| #define PHY_CONTROL_RESET 0x8000 |
| #define PHY_CONTROL_AUTO_NEG 0x1000 |
| #define PHY_CONTROL_RESTART_AUTO_NEG 0x0200 |
| #define PHY_ADDRESS 0x0 |
| |
| /* PK_COUNT register. */ |
| #define PK_COUNT_TX_A_SHF 24 |
| #define PK_COUNT_TX_A_MSK (0xff << PK_COUNT_TX_A_SHF) |
| #define PK_COUNT_TX_B_SHF 16 |
| #define PK_COUNT_TX_B_MSK (0xff << PK_COUNT_TX_B_SHF) |
| #define PK_COUNT_RX_A_SHF 8 |
| #define PK_COUNT_RX_A_MSK (0xff << PK_COUNT_RX_A_SHF) |
| #define PK_COUNT_RX_B_SHF 0 |
| #define PK_COUNT_RX_B_MSK (0xff << PK_COUNT_RX_B_SHF) |
| |
| /* OK2USE register. */ |
| #define OK2USE_TX_A 0x8 |
| #define OK2USE_TX_B 0x4 |
| #define OK2USE_RX_A 0x2 |
| #define OK2USE_RX_B 0x1 |
| |
| /* LAN DMA CONTROL register. */ |
| #define DMA_CTL_BLK_INT 0x80000000 |
| #define DMA_CTL_MAX_XFER_SHF 18 |
| #define DMA_CTL_MAX_XFER_MSK (0x3 << LAN_DMA_CTL_MAX_XFER_SHF) |
| #define DMA_CTL_ENDIAN_SHF 16 |
| #define DMA_CTL_ENDIAN_MSK (0x3 << LAN_DMA_CTL_ENDIAN_SHF) |
| #define DMA_CTL_RX_INT_COUNT_SHF 8 |
| #define DMA_CTL_RX_INT_COUNT_MSK (0xff << LAN_DMA_CTL_RX_INT_COUNT_SHF) |
| #define DMA_CTL_EN_TX_DMA 0x00000080 |
| #define DMA_CTL_EN_RX_DMA 0x00000040 |
| #define DMA_CTL_RX_INT_BUFFUL_EN 0x00000020 |
| #define DMA_CTL_RX_INT_TO_EN 0x00000010 |
| #define DMA_CTL_RX_INT_EN 0x00000008 |
| #define DMA_CTL_TX_INT_EN 0x00000004 |
| #define DMA_CTL_MAC_TX_INT_EN 0x00000002 |
| #define DMA_CTL_MAC_RX_INT_EN 0x00000001 |
| |
| /* DMA STATUS register. */ |
| #define DMA_STATUS_BAD_ADDR_SHF 16 |
| #define DMA_STATUS_BAD_ADDR_MSK (0xf << DMA_STATUS_BAD_ADDR_SHF) |
| #define DMA_STATUS_RX_PKTS_RECEIVED_SHF 8 |
| #define DMA_STATUS_RX_PKTS_RECEIVED_MSK (0xff << DMA_STATUS_RX_PKTS_RECEIVED_SHF) |
| #define DMA_STATUS_TX_EN_SYNC 0x00000080 |
| #define DMA_STATUS_RX_BUF_A_FUL 0x00000040 |
| #define DMA_STATUS_RX_BUF_B_FUL 0x00000020 |
| #define DMA_STATUS_RX_TO_INT 0x00000010 |
| #define DMA_STATUS_RX_INT 0x00000008 |
| #define DMA_STATUS_TX_INT 0x00000004 |
| #define DMA_STATUS_MAC_TX_INT 0x00000002 |
| #define DMA_STATUS_MAC_RX_INT 0x00000001 |
| |
| /* DMA TEST/PANIC SWITHES register. */ |
| #define DMA_TEST_LOOPBACK 0x01000000 |
| #define DMA_TEST_SW_RESET 0x00000001 |
| |
| /* MAC CONTROL register. */ |
| #define MAC_CONTROL_EN_MISS_ROLL 0x00002000 |
| #define MAC_CONTROL_MISS_ROLL 0x00000400 |
| #define MAC_CONTROL_LOOP10 0x00000080 |
| #define MAC_CONTROL_CONN_SHF 5 |
| #define MAC_CONTROL_CONN_MSK (0x3 << MAC_CONTROL_CONN_SHF) |
| #define MAC_CONTROL_MAC_LOOP 0x00000010 |
| #define MAC_CONTROL_FULL_DUP 0x00000008 |
| #define MAC_CONTROL_RESET 0x00000004 |
| #define MAC_CONTROL_HALT_IMM 0x00000002 |
| #define MAC_CONTROL_HALT_REQ 0x00000001 |
| |
| /* CAM CONTROL register. */ |
| #define CAM_CONTROL_COMP_EN 0x00000010 |
| #define CAM_CONTROL_NEG_CAM 0x00000008 |
| #define CAM_CONTROL_BROAD_ACC 0x00000004 |
| #define CAM_CONTROL_GROUP_ACC 0x00000002 |
| #define CAM_CONTROL_STATION_ACC 0x00000001 |
| |
| /* TRANSMIT CONTROL register. */ |
| #define TX_CTL_EN_COMP 0x00004000 |
| #define TX_CTL_EN_TX_PAR 0x00002000 |
| #define TX_CTL_EN_LATE_COLL 0x00001000 |
| #define TX_CTL_EN_EX_COLL 0x00000800 |
| #define TX_CTL_EN_L_CARR 0x00000400 |
| #define TX_CTL_EN_EX_DEFER 0x00000200 |
| #define TX_CTL_EN_UNDER 0x00000100 |
| #define TX_CTL_MII10 0x00000080 |
| #define TX_CTL_SD_PAUSE 0x00000040 |
| #define TX_CTL_NO_EX_DEF0 0x00000020 |
| #define TX_CTL_F_BACK 0x00000010 |
| #define TX_CTL_NO_CRC 0x00000008 |
| #define TX_CTL_NO_PAD 0x00000004 |
| #define TX_CTL_TX_HALT 0x00000002 |
| #define TX_CTL_TX_EN 0x00000001 |
| |
| /* TRANSMIT STATUS register. */ |
| #define TX_STATUS_SQ_ERR 0x00010000 |
| #define TX_STATUS_TX_HALTED 0x00008000 |
| #define TX_STATUS_COMP 0x00004000 |
| #define TX_STATUS_TX_PAR 0x00002000 |
| #define TX_STATUS_LATE_COLL 0x00001000 |
| #define TX_STATUS_TX10_STAT 0x00000800 |
| #define TX_STATUS_L_CARR 0x00000400 |
| #define TX_STATUS_EX_DEFER 0x00000200 |
| #define TX_STATUS_UNDER 0x00000100 |
| #define TX_STATUS_IN_TX 0x00000080 |
| #define TX_STATUS_PAUSED 0x00000040 |
| #define TX_STATUS_TX_DEFERRED 0x00000020 |
| #define TX_STATUS_EX_COLL 0x00000010 |
| #define TX_STATUS_TX_COLL_SHF 0 |
| #define TX_STATUS_TX_COLL_MSK (0xf << TX_STATUS_TX_COLL_SHF) |
| |
| /* RECEIVE CONTROL register. */ |
| #define RX_CTL_EN_GOOD 0x00004000 |
| #define RX_CTL_EN_RX_PAR 0x00002000 |
| #define RX_CTL_EN_LONG_ERR 0x00000800 |
| #define RX_CTL_EN_OVER 0x00000400 |
| #define RX_CTL_EN_CRC_ERR 0x00000200 |
| #define RX_CTL_EN_ALIGN 0x00000100 |
| #define RX_CTL_IGNORE_CRC 0x00000040 |
| #define RX_CTL_PASS_CTL 0x00000020 |
| #define RX_CTL_STRIP_CRC 0x00000010 |
| #define RX_CTL_SHORT_EN 0x00000008 |
| #define RX_CTL_LONG_EN 0x00000004 |
| #define RX_CTL_RX_HALT 0x00000002 |
| #define RX_CTL_RX_EN 0x00000001 |
| |
| /* RECEIVE STATUS register. */ |
| #define RX_STATUS_RX_HALTED 0x00008000 |
| #define RX_STATUS_GOOD 0x00004000 |
| #define RX_STATUS_RX_PAR 0x00002000 |
| #define RX_STATUS_LONG_ERR 0x00000800 |
| #define RX_STATUS_OVERFLOW 0x00000400 |
| #define RX_STATUS_CRC_ERR 0x00000200 |
| #define RX_STATUS_ALIGN_ERR 0x00000100 |
| #define RX_STATUS_RX10_STAT 0x00000080 |
| #define RX_STATUS_INT_RX 0x00000040 |
| #define RX_STATUS_CTL_RECD 0x00000020 |
| |
| /* MD_CA register. */ |
| #define MD_CA_PRE_SUP 0x00001000 |
| #define MD_CA_BUSY 0x00000800 |
| #define MD_CA_WR 0x00000400 |
| #define MD_CA_PHY_SHF 5 |
| #define MD_CA_PHY_MSK (0x1f << MD_CA_PHY_SHF) |
| #define MD_CA_ADDR_SHF 0 |
| #define MD_CA_ADDR_MSK (0x1f << MD_CA_ADDR_SHF) |
| |
| /* Tx Status/Control. */ |
| #define TX_STAT_CTL_OWNER_SHF 30 |
| #define TX_STAT_CTL_OWNER_MSK (0x3 << TX_STAT_CTL_OWNER_SHF) |
| #define TX_STAT_CTL_FRAME_SHF 27 |
| #define TX_STAT_CTL_FRAME_MSK (0x7 << TX_STAT_CTL_FRAME_SHF) |
| #define TX_STAT_CTL_STATUS_SHF 11 |
| #define TX_STAT_CTL_STATUS_MSK (0x1ffff << TX_STAT_CTL_STATUS_SHF) |
| #define TX_STAT_CTL_LENGTH_SHF 0 |
| #define TX_STAT_CTL_LENGTH_MSK (0x7ff << TX_STAT_CTL_LENGTH_SHF) |
| |
| #define TX_STAT_CTL_ERROR_MSK ((TX_STATUS_SQ_ERR | \ |
| TX_STATUS_TX_HALTED | \ |
| TX_STATUS_TX_PAR | \ |
| TX_STATUS_LATE_COLL | \ |
| TX_STATUS_L_CARR | \ |
| TX_STATUS_EX_DEFER | \ |
| TX_STATUS_UNDER | \ |
| TX_STATUS_PAUSED | \ |
| TX_STATUS_TX_DEFERRED | \ |
| TX_STATUS_EX_COLL | \ |
| TX_STATUS_TX_COLL_MSK) \ |
| << TX_STAT_CTL_STATUS_SHF) |
| #define TX_STAT_CTL_INT_AFTER_TX 0x4 |
| |
| /* Rx Status/Control. */ |
| #define RX_STAT_CTL_OWNER_SHF 30 |
| #define RX_STAT_CTL_OWNER_MSK (0x3 << RX_STAT_CTL_OWNER_SHF) |
| #define RX_STAT_CTL_STATUS_SHF 11 |
| #define RX_STAT_CTL_STATUS_MSK (0xffff << RX_STAT_CTL_STATUS_SHF) |
| #define RX_STAT_CTL_LENGTH_SHF 0 |
| #define RX_STAT_CTL_LENGTH_MSK (0x7ff << RX_STAT_CTL_LENGTH_SHF) |
| |
| |
| |
| /* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */ |
| #define SAA9730_LAN_REGS_ADDR 0x20400 |
| #define SAA9730_LAN_REGS_SIZE 0x00400 |
| |
| struct lan_saa9730_regmap { |
| volatile unsigned int TxBuffA; /* 0x20400 */ |
| volatile unsigned int TxBuffB; /* 0x20404 */ |
| volatile unsigned int RxBuffA; /* 0x20408 */ |
| volatile unsigned int RxBuffB; /* 0x2040c */ |
| volatile unsigned int PacketCount; /* 0x20410 */ |
| volatile unsigned int Ok2Use; /* 0x20414 */ |
| volatile unsigned int LanDmaCtl; /* 0x20418 */ |
| volatile unsigned int Timeout; /* 0x2041c */ |
| volatile unsigned int DmaStatus; /* 0x20420 */ |
| volatile unsigned int DmaTest; /* 0x20424 */ |
| volatile unsigned char filler20428[0x20430 - 0x20428]; |
| volatile unsigned int PauseCount; /* 0x20430 */ |
| volatile unsigned int RemotePauseCount; /* 0x20434 */ |
| volatile unsigned char filler20438[0x20440 - 0x20438]; |
| volatile unsigned int MacCtl; /* 0x20440 */ |
| volatile unsigned int CamCtl; /* 0x20444 */ |
| volatile unsigned int TxCtl; /* 0x20448 */ |
| volatile unsigned int TxStatus; /* 0x2044c */ |
| volatile unsigned int RxCtl; /* 0x20450 */ |
| volatile unsigned int RxStatus; /* 0x20454 */ |
| volatile unsigned int StationMgmtData; /* 0x20458 */ |
| volatile unsigned int StationMgmtCtl; /* 0x2045c */ |
| volatile unsigned int CamAddress; /* 0x20460 */ |
| volatile unsigned int CamData; /* 0x20464 */ |
| volatile unsigned int CamEnable; /* 0x20468 */ |
| volatile unsigned char filler2046c[0x20500 - 0x2046c]; |
| volatile unsigned int DebugPCIMasterAddr; /* 0x20500 */ |
| volatile unsigned int DebugLanTxStateMachine; /* 0x20504 */ |
| volatile unsigned int DebugLanRxStateMachine; /* 0x20508 */ |
| volatile unsigned int DebugLanTxFifoPointers; /* 0x2050c */ |
| volatile unsigned int DebugLanRxFifoPointers; /* 0x20510 */ |
| volatile unsigned int DebugLanCtlStateMachine; /* 0x20514 */ |
| }; |
| typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap; |
| |
| |
| /* EVM interrupt control registers. */ |
| #define EVM_LAN_INT 0x00010000 |
| #define EVM_MASTER_EN 0x00000001 |
| |
| /* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */ |
| #define SAA9730_EVM_REGS_ADDR 0x02000 |
| #define SAA9730_EVM_REGS_SIZE 0x00400 |
| |
| struct evm_saa9730_regmap { |
| volatile unsigned int InterruptStatus1; /* 0x2000 */ |
| volatile unsigned int InterruptEnable1; /* 0x2004 */ |
| volatile unsigned int InterruptMonitor1; /* 0x2008 */ |
| volatile unsigned int Counter; /* 0x200c */ |
| volatile unsigned int CounterThreshold; /* 0x2010 */ |
| volatile unsigned int CounterControl; /* 0x2014 */ |
| volatile unsigned int GpioControl1; /* 0x2018 */ |
| volatile unsigned int InterruptStatus2; /* 0x201c */ |
| volatile unsigned int InterruptEnable2; /* 0x2020 */ |
| volatile unsigned int InterruptMonitor2; /* 0x2024 */ |
| volatile unsigned int GpioControl2; /* 0x2028 */ |
| volatile unsigned int InterruptBlock1; /* 0x202c */ |
| volatile unsigned int InterruptBlock2; /* 0x2030 */ |
| }; |
| typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap; |
| |
| |
| struct lan_saa9730_private { |
| /* |
| * Rx/Tx packet buffers. |
| * The Rx and Tx packets must be PACKET_SIZE aligned. |
| */ |
| void *buffer_start; |
| unsigned int buffer_size; |
| |
| /* |
| * DMA address of beginning of this object, returned |
| * by pci_alloc_consistent(). |
| */ |
| dma_addr_t dma_addr; |
| |
| /* Pointer to the associated pci device structure */ |
| struct pci_dev *pci_dev; |
| |
| /* Pointer for the SAA9730 LAN controller register set. */ |
| t_lan_saa9730_regmap *lan_saa9730_regs; |
| |
| /* Pointer to the SAA9730 EVM register. */ |
| t_evm_saa9730_regmap *evm_saa9730_regs; |
| |
| /* Rcv buffer Index. */ |
| unsigned char NextRcvPacketIndex; |
| /* Next buffer index. */ |
| unsigned char NextRcvBufferIndex; |
| |
| /* Index of next packet to use in that buffer. */ |
| unsigned char NextTxmPacketIndex; |
| /* Next buffer index. */ |
| unsigned char NextTxmBufferIndex; |
| |
| /* Index of first pending packet ready to send. */ |
| unsigned char PendingTxmPacketIndex; |
| /* Pending buffer index. */ |
| unsigned char PendingTxmBufferIndex; |
| |
| unsigned char DmaRcvPackets; |
| unsigned char DmaTxmPackets; |
| |
| void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE]; |
| void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE]; |
| unsigned int TxBufferFree[LAN_SAA9730_BUFFERS]; |
| |
| unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6]; |
| |
| spinlock_t lock; |
| }; |
| |
| #endif /* _SAA9730_H */ |