arch/arm/oprofile/op_model_xscale.c - kernel/msm-4.9 - Gitiles

 /**
  * @file op_model_xscale.c
  * XScale Performance Monitor Driver
  *
  * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
  * @remark Copyright 2000-2004 MontaVista Software Inc
  * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
  * @remark Copyright 2004 Intel Corporation
  * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
  * @remark Copyright 2004 OProfile Authors
  *
  * @remark Read the file COPYING
  *
  * @author Zwane Mwaikambo
  */

 /* #define DEBUG */
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>

 #include <asm/cputype.h>
 #include <asm/pmu.h>

 #include "op_counter.h"
 #include "op_arm_model.h"

 #define	PMU_ENABLE	0x001	/* Enable counters */
 #define PMN_RESET	0x002	/* Reset event counters */
 #define	CCNT_RESET	0x004	/* Reset clock counter */
 #define	PMU_RESET	(CCNT_RESET | PMN_RESET)
 #define PMU_CNT64	0x008	/* Make CCNT count every 64th cycle */

 /*
  * Different types of events that can be counted by the XScale PMU
  * as used by Oprofile userspace. Here primarily for documentation
  * purposes.
  */

 #define EVT_ICACHE_MISS			0x00
 #define	EVT_ICACHE_NO_DELIVER		0x01
 #define	EVT_DATA_STALL			0x02
 #define	EVT_ITLB_MISS			0x03
 #define	EVT_DTLB_MISS			0x04
 #define	EVT_BRANCH			0x05
 #define	EVT_BRANCH_MISS			0x06
 #define	EVT_INSTRUCTION			0x07
 #define	EVT_DCACHE_FULL_STALL		0x08
 #define	EVT_DCACHE_FULL_STALL_CONTIG	0x09
 #define	EVT_DCACHE_ACCESS		0x0A
 #define	EVT_DCACHE_MISS			0x0B
 #define	EVT_DCACE_WRITE_BACK		0x0C
 #define	EVT_PC_CHANGED			0x0D
 #define	EVT_BCU_REQUEST			0x10
 #define	EVT_BCU_FULL			0x11
 #define	EVT_BCU_DRAIN			0x12
 #define	EVT_BCU_ECC_NO_ELOG		0x14
 #define	EVT_BCU_1_BIT_ERR		0x15
 #define	EVT_RMW				0x16
 /* EVT_CCNT is not hardware defined */
 #define EVT_CCNT			0xFE
 #define EVT_UNUSED			0xFF

 struct pmu_counter {
 	volatile unsigned long ovf;
 	unsigned long reset_counter;
 };

 enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS };

 static struct pmu_counter results[MAX_COUNTERS];

 /*
  * There are two versions of the PMU in current XScale processors
  * with differing register layouts and number of performance counters.
  * e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
  * We detect which register layout to use in xscale_detect_pmu()
  */
 enum { PMU_XSC1, PMU_XSC2 };

 struct pmu_type {
 	int id;
 	char *name;
 	int num_counters;
 	unsigned int int_enable;
 	unsigned int cnt_ovf[MAX_COUNTERS];
 	unsigned int int_mask[MAX_COUNTERS];
 };

 static struct pmu_type pmu_parms[] = {
 	{
 		.id		= PMU_XSC1,
 		.name		= "arm/xscale1",
 		.num_counters	= 3,
 		.int_mask	= { [PMN0] = 0x10, [PMN1] = 0x20,
 				    [CCNT] = 0x40 },
 		.cnt_ovf	= { [CCNT] = 0x400, [PMN0] = 0x100,
 				    [PMN1] = 0x200},
 	},
 	{
 		.id		= PMU_XSC2,
 		.name		= "arm/xscale2",
 		.num_counters	= 5,
 		.int_mask	= { [CCNT] = 0x01, [PMN0] = 0x02,
 				    [PMN1] = 0x04, [PMN2] = 0x08,
 				    [PMN3] = 0x10 },
 		.cnt_ovf	= { [CCNT] = 0x01, [PMN0] = 0x02,
 				    [PMN1] = 0x04, [PMN2] = 0x08,
 				    [PMN3] = 0x10 },
 	},
 };

 static struct pmu_type *pmu;

 static void write_pmnc(u32 val)
 {
 	if (pmu->id == PMU_XSC1) {
 		/* upper 4bits and 7, 11 are write-as-0 */
 		val &= 0xffff77f;
 		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
 	} else {
 		/* bits 4-23 are write-as-0, 24-31 are write ignored */
 		val &= 0xf;
 		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
 	}
 }

 static u32 read_pmnc(void)
 {
 	u32 val;

 	if (pmu->id == PMU_XSC1)
 		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
 	else {
 		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
 		/* bits 1-2 and 4-23 are read-unpredictable */
 		val &= 0xff000009;
 	}

 	return val;
 }

 static u32 __xsc1_read_counter(int counter)
 {
 	u32 val = 0;

 	switch (counter) {
 	case CCNT:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
 		break;
 	case PMN0:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
 		break;
 	case PMN1:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
 		break;
 	}
 	return val;
 }

 static u32 __xsc2_read_counter(int counter)
 {
 	u32 val = 0;

 	switch (counter) {
 	case CCNT:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
 		break;
 	case PMN0:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
 		break;
 	case PMN1:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
 		break;
 	case PMN2:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
 		break;
 	case PMN3:
 		__asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
 		break;
 	}
 	return val;
 }

 static u32 read_counter(int counter)
 {
 	u32 val;

 	if (pmu->id == PMU_XSC1)
 		val = __xsc1_read_counter(counter);
 	else
 		val = __xsc2_read_counter(counter);

 	return val;
 }

 static void __xsc1_write_counter(int counter, u32 val)
 {
 	switch (counter) {
 	case CCNT:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
 		break;
 	case PMN0:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
 		break;
 	case PMN1:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
 		break;
 	}
 }

 static void __xsc2_write_counter(int counter, u32 val)
 {
 	switch (counter) {
 	case CCNT:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
 		break;
 	case PMN0:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
 		break;
 	case PMN1:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
 		break;
 	case PMN2:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
 		break;
 	case PMN3:
 		__asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
 		break;
 	}
 }

 static void write_counter(int counter, u32 val)
 {
 	if (pmu->id == PMU_XSC1)
 		__xsc1_write_counter(counter, val);
 	else
 		__xsc2_write_counter(counter, val);
 }

 static int xscale_setup_ctrs(void)
 {
 	u32 evtsel, pmnc;
 	int i;

 	for (i = CCNT; i < MAX_COUNTERS; i++) {
 		if (counter_config[i].enabled)
 			continue;

 		counter_config[i].event = EVT_UNUSED;
 	}

 	switch (pmu->id) {
 	case PMU_XSC1:
 		pmnc = (counter_config[PMN1].event << 20) | (counter_config[PMN0].event << 12);
 		pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc);
 		write_pmnc(pmnc);
 		break;

 	case PMU_XSC2:
 		evtsel = counter_config[PMN0].event | (counter_config[PMN1].event << 8) |
 			(counter_config[PMN2].event << 16) | (counter_config[PMN3].event << 24);

 		pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel);
 		__asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel));
 		break;
 	}

 	for (i = CCNT; i < MAX_COUNTERS; i++) {
 		if (counter_config[i].event == EVT_UNUSED) {
 			counter_config[i].event = 0;
 			pmu->int_enable &= ~pmu->int_mask[i];
 			continue;
 		}

 		results[i].reset_counter = counter_config[i].count;
 		write_counter(i, -(u32)counter_config[i].count);
 		pmu->int_enable |= pmu->int_mask[i];
 		pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i,
 			read_counter(i), counter_config[i].count);
 	}

 	return 0;
 }

 static void inline __xsc1_check_ctrs(void)
 {
 	int i;
 	u32 pmnc = read_pmnc();

 	/* NOTE: there's an A stepping errata that states if an overflow */
 	/*       bit already exists and another occurs, the previous     */
 	/*       Overflow bit gets cleared. There's no workaround.	 */
 	/*	 Fixed in B stepping or later			 	 */

 	/* Write the value back to clear the overflow flags. Overflow */
 	/* flags remain in pmnc for use below */
 	write_pmnc(pmnc & ~PMU_ENABLE);

 	for (i = CCNT; i <= PMN1; i++) {
 		if (!(pmu->int_mask[i] & pmu->int_enable))
 			continue;

 		if (pmnc & pmu->cnt_ovf[i])
 			results[i].ovf++;
 	}
 }

 static void inline __xsc2_check_ctrs(void)
 {
 	int i;
 	u32 flag = 0, pmnc = read_pmnc();

 	pmnc &= ~PMU_ENABLE;
 	write_pmnc(pmnc);

 	/* read overflow flag register */
 	__asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag));

 	for (i = CCNT; i <= PMN3; i++) {
 		if (!(pmu->int_mask[i] & pmu->int_enable))
 			continue;

 		if (flag & pmu->cnt_ovf[i])
 			results[i].ovf++;
 	}

 	/* writeback clears overflow bits */
 	__asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag));
 }

 static irqreturn_t xscale_pmu_interrupt(int irq, void *arg)
 {
 	int i;
 	u32 pmnc;

 	if (pmu->id == PMU_XSC1)
 		__xsc1_check_ctrs();
 	else
 		__xsc2_check_ctrs();

 	for (i = CCNT; i < MAX_COUNTERS; i++) {
 		if (!results[i].ovf)
 			continue;

 		write_counter(i, -(u32)results[i].reset_counter);
 		oprofile_add_sample(get_irq_regs(), i);
 		results[i].ovf--;
 	}

 	pmnc = read_pmnc() | PMU_ENABLE;
 	write_pmnc(pmnc);

 	return IRQ_HANDLED;
 }

 static const struct pmu_irqs *pmu_irqs;

 static void xscale_pmu_stop(void)
 {
 	u32 pmnc = read_pmnc();

 	pmnc &= ~PMU_ENABLE;
 	write_pmnc(pmnc);

 	free_irq(pmu_irqs->irqs[0], results);
 	release_pmu(pmu_irqs);
 	pmu_irqs = NULL;
 }

 static int xscale_pmu_start(void)
 {
 	int ret;
 	u32 pmnc;

 	pmu_irqs = reserve_pmu();
 	if (IS_ERR(pmu_irqs))
 		return PTR_ERR(pmu_irqs);

 	pmnc = read_pmnc();

 	ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
 			  IRQF_DISABLED, "XScale PMU", (void *)results);

 	if (ret < 0) {
 		printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
 		       pmu_irqs->irqs[0]);
 		release_pmu(pmu_irqs);
 		pmu_irqs = NULL;
 		return ret;
 	}

 	if (pmu->id == PMU_XSC1)
 		pmnc |= pmu->int_enable;
 	else {
 		__asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable));
 		pmnc &= ~PMU_CNT64;
 	}

 	pmnc |= PMU_ENABLE;
 	write_pmnc(pmnc);
 	pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable);
 	return 0;
 }

 static int xscale_detect_pmu(void)
 {
 	int ret = 0;
 	u32 id;

 	id = (read_cpuid(CPUID_ID) >> 13) & 0x7;

 	switch (id) {
 	case 1:
 		pmu = &pmu_parms[PMU_XSC1];
 		break;
 	case 2:
 		pmu = &pmu_parms[PMU_XSC2];
 		break;
 	default:
 		ret = -ENODEV;
 		break;
 	}

 	if (!ret) {
 		op_xscale_spec.name = pmu->name;
 		op_xscale_spec.num_counters = pmu->num_counters;
 		pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name);
 	}

 	return ret;
 }

 struct op_arm_model_spec op_xscale_spec = {
 	.init		= xscale_detect_pmu,
 	.setup_ctrs	= xscale_setup_ctrs,
 	.start		= xscale_pmu_start,
 	.stop		= xscale_pmu_stop,
 };
	/**
	* @file op_model_xscale.c
	* XScale Performance Monitor Driver
	*
	* @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
	* @remark Copyright 2000-2004 MontaVista Software Inc
	* @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
	* @remark Copyright 2004 Intel Corporation
	* @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
	* @remark Copyright 2004 OProfile Authors
	*
	* @remark Read the file COPYING
	*
	* @author Zwane Mwaikambo
	*/

	/* #define DEBUG */
	#include <linux/types.h>
	#include <linux/errno.h>
	#include <linux/err.h>
	#include <linux/sched.h>
	#include <linux/oprofile.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>

	#include <asm/cputype.h>
	#include <asm/pmu.h>

	#include "op_counter.h"
	#include "op_arm_model.h"

	#define PMU_ENABLE 0x001 /* Enable counters */
	#define PMN_RESET 0x002 /* Reset event counters */
	#define CCNT_RESET 0x004 /* Reset clock counter */
	#define PMU_RESET (CCNT_RESET \| PMN_RESET)
	#define PMU_CNT64 0x008 /* Make CCNT count every 64th cycle */

	/*
	* Different types of events that can be counted by the XScale PMU
	* as used by Oprofile userspace. Here primarily for documentation
	* purposes.
	*/

	#define EVT_ICACHE_MISS 0x00
	#define EVT_ICACHE_NO_DELIVER 0x01
	#define EVT_DATA_STALL 0x02
	#define EVT_ITLB_MISS 0x03
	#define EVT_DTLB_MISS 0x04
	#define EVT_BRANCH 0x05
	#define EVT_BRANCH_MISS 0x06
	#define EVT_INSTRUCTION 0x07
	#define EVT_DCACHE_FULL_STALL 0x08
	#define EVT_DCACHE_FULL_STALL_CONTIG 0x09
	#define EVT_DCACHE_ACCESS 0x0A
	#define EVT_DCACHE_MISS 0x0B
	#define EVT_DCACE_WRITE_BACK 0x0C
	#define EVT_PC_CHANGED 0x0D
	#define EVT_BCU_REQUEST 0x10
	#define EVT_BCU_FULL 0x11
	#define EVT_BCU_DRAIN 0x12
	#define EVT_BCU_ECC_NO_ELOG 0x14
	#define EVT_BCU_1_BIT_ERR 0x15
	#define EVT_RMW 0x16
	/* EVT_CCNT is not hardware defined */
	#define EVT_CCNT 0xFE
	#define EVT_UNUSED 0xFF

	struct pmu_counter {
	volatile unsigned long ovf;
	unsigned long reset_counter;
	};

	enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS };

	static struct pmu_counter results[MAX_COUNTERS];

	/*
	* There are two versions of the PMU in current XScale processors
	* with differing register layouts and number of performance counters.
	* e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
	* We detect which register layout to use in xscale_detect_pmu()
	*/
	enum { PMU_XSC1, PMU_XSC2 };

	struct pmu_type {
	int id;
	char *name;
	int num_counters;
	unsigned int int_enable;
	unsigned int cnt_ovf[MAX_COUNTERS];
	unsigned int int_mask[MAX_COUNTERS];
	};

	static struct pmu_type pmu_parms[] = {
	{
	.id = PMU_XSC1,
	.name = "arm/xscale1",
	.num_counters = 3,
	.int_mask = { [PMN0] = 0x10, [PMN1] = 0x20,
	[CCNT] = 0x40 },
	.cnt_ovf = { [CCNT] = 0x400, [PMN0] = 0x100,
	[PMN1] = 0x200},
	},
	{
	.id = PMU_XSC2,
	.name = "arm/xscale2",
	.num_counters = 5,
	.int_mask = { [CCNT] = 0x01, [PMN0] = 0x02,
	[PMN1] = 0x04, [PMN2] = 0x08,
	[PMN3] = 0x10 },
	.cnt_ovf = { [CCNT] = 0x01, [PMN0] = 0x02,
	[PMN1] = 0x04, [PMN2] = 0x08,
	[PMN3] = 0x10 },
	},
	};

	static struct pmu_type *pmu;

	static void write_pmnc(u32 val)
	{
	if (pmu->id == PMU_XSC1) {
	/* upper 4bits and 7, 11 are write-as-0 */
	val &= 0xffff77f;
	__asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
	} else {
	/* bits 4-23 are write-as-0, 24-31 are write ignored */
	val &= 0xf;
	__asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
	}
	}

	static u32 read_pmnc(void)
	{
	u32 val;

	if (pmu->id == PMU_XSC1)
	__asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
	else {
	__asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
	/* bits 1-2 and 4-23 are read-unpredictable */
	val &= 0xff000009;
	}

	return val;
	}

	static u32 __xsc1_read_counter(int counter)
	{
	u32 val = 0;

	switch (counter) {
	case CCNT:
	__asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
	break;
	case PMN0:
	__asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
	break;
	case PMN1:
	__asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
	break;
	}
	return val;
	}

	static u32 __xsc2_read_counter(int counter)
	{
	u32 val = 0;

	switch (counter) {
	case CCNT:
	__asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
	break;
	case PMN0:
	__asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
	break;
	case PMN1:
	__asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
	break;
	case PMN2:
	__asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
	break;
	case PMN3:
	__asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
	break;
	}
	return val;
	}

	static u32 read_counter(int counter)
	{
	u32 val;

	if (pmu->id == PMU_XSC1)
	val = __xsc1_read_counter(counter);
	else
	val = __xsc2_read_counter(counter);

	return val;
	}

	static void __xsc1_write_counter(int counter, u32 val)
	{
	switch (counter) {
	case CCNT:
	__asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
	break;
	case PMN0:
	__asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
	break;
	case PMN1:
	__asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
	break;
	}
	}

	static void __xsc2_write_counter(int counter, u32 val)
	{
	switch (counter) {
	case CCNT:
	__asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
	break;
	case PMN0:
	__asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
	break;
	case PMN1:
	__asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
	break;
	case PMN2:
	__asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
	break;
	case PMN3:
	__asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
	break;
	}
	}

	static void write_counter(int counter, u32 val)
	{
	if (pmu->id == PMU_XSC1)
	__xsc1_write_counter(counter, val);
	else
	__xsc2_write_counter(counter, val);
	}

	static int xscale_setup_ctrs(void)
	{
	u32 evtsel, pmnc;
	int i;

	for (i = CCNT; i < MAX_COUNTERS; i++) {
	if (counter_config[i].enabled)
	continue;

	counter_config[i].event = EVT_UNUSED;
	}

	switch (pmu->id) {
	case PMU_XSC1:
	pmnc = (counter_config[PMN1].event << 20) \| (counter_config[PMN0].event << 12);
	pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc);
	write_pmnc(pmnc);
	break;

	case PMU_XSC2:
	evtsel = counter_config[PMN0].event \| (counter_config[PMN1].event << 8) \|
	(counter_config[PMN2].event << 16) \| (counter_config[PMN3].event << 24);

	pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel);
	__asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel));
	break;
	}

	for (i = CCNT; i < MAX_COUNTERS; i++) {
	if (counter_config[i].event == EVT_UNUSED) {
	counter_config[i].event = 0;
	pmu->int_enable &= ~pmu->int_mask[i];
	continue;
	}

	results[i].reset_counter = counter_config[i].count;
	write_counter(i, -(u32)counter_config[i].count);
	pmu->int_enable \|= pmu->int_mask[i];
	pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i,
	read_counter(i), counter_config[i].count);
	}

	return 0;
	}

	static void inline __xsc1_check_ctrs(void)
	{
	int i;
	u32 pmnc = read_pmnc();

	/* NOTE: there's an A stepping errata that states if an overflow */
	/* bit already exists and another occurs, the previous */
	/* Overflow bit gets cleared. There's no workaround. */
	/* Fixed in B stepping or later */

	/* Write the value back to clear the overflow flags. Overflow */
	/* flags remain in pmnc for use below */
	write_pmnc(pmnc & ~PMU_ENABLE);

	for (i = CCNT; i <= PMN1; i++) {
	if (!(pmu->int_mask[i] & pmu->int_enable))
	continue;

	if (pmnc & pmu->cnt_ovf[i])
	results[i].ovf++;
	}
	}

	static void inline __xsc2_check_ctrs(void)
	{
	int i;
	u32 flag = 0, pmnc = read_pmnc();

	pmnc &= ~PMU_ENABLE;
	write_pmnc(pmnc);

	/* read overflow flag register */
	__asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag));

	for (i = CCNT; i <= PMN3; i++) {
	if (!(pmu->int_mask[i] & pmu->int_enable))
	continue;

	if (flag & pmu->cnt_ovf[i])
	results[i].ovf++;
	}

	/* writeback clears overflow bits */
	__asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag));
	}

	static irqreturn_t xscale_pmu_interrupt(int irq, void *arg)
	{
	int i;
	u32 pmnc;

	if (pmu->id == PMU_XSC1)
	__xsc1_check_ctrs();
	else
	__xsc2_check_ctrs();

	for (i = CCNT; i < MAX_COUNTERS; i++) {
	if (!results[i].ovf)
	continue;

	write_counter(i, -(u32)results[i].reset_counter);
	oprofile_add_sample(get_irq_regs(), i);
	results[i].ovf--;
	}

	pmnc = read_pmnc() \| PMU_ENABLE;
	write_pmnc(pmnc);

	return IRQ_HANDLED;
	}

	static const struct pmu_irqs *pmu_irqs;

	static void xscale_pmu_stop(void)
	{
	u32 pmnc = read_pmnc();

	pmnc &= ~PMU_ENABLE;
	write_pmnc(pmnc);

	free_irq(pmu_irqs->irqs[0], results);
	release_pmu(pmu_irqs);
	pmu_irqs = NULL;
	}

	static int xscale_pmu_start(void)
	{
	int ret;
	u32 pmnc;

	pmu_irqs = reserve_pmu();
	if (IS_ERR(pmu_irqs))
	return PTR_ERR(pmu_irqs);

	pmnc = read_pmnc();

	ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
	IRQF_DISABLED, "XScale PMU", (void *)results);

	if (ret < 0) {
	printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
	pmu_irqs->irqs[0]);
	release_pmu(pmu_irqs);
	pmu_irqs = NULL;
	return ret;
	}

	if (pmu->id == PMU_XSC1)
	pmnc \|= pmu->int_enable;
	else {
	__asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable));
	pmnc &= ~PMU_CNT64;
	}

	pmnc \|= PMU_ENABLE;
	write_pmnc(pmnc);
	pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable);
	return 0;
	}

	static int xscale_detect_pmu(void)
	{
	int ret = 0;
	u32 id;

	id = (read_cpuid(CPUID_ID) >> 13) & 0x7;

	switch (id) {
	case 1:
	pmu = &pmu_parms[PMU_XSC1];
	break;
	case 2:
	pmu = &pmu_parms[PMU_XSC2];
	break;
	default:
	ret = -ENODEV;
	break;
	}

	if (!ret) {
	op_xscale_spec.name = pmu->name;
	op_xscale_spec.num_counters = pmu->num_counters;
	pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name);
	}

	return ret;
	}

	struct op_arm_model_spec op_xscale_spec = {
	.init = xscale_detect_pmu,
	.setup_ctrs = xscale_setup_ctrs,
	.start = xscale_pmu_start,
	.stop = xscale_pmu_stop,
	};