| Kernel driver lm25066 |
| ===================== |
| |
| Supported chips: |
| * TI LM25056 |
| Prefix: 'lm25056' |
| Addresses scanned: - |
| Datasheets: |
| http://www.ti.com/lit/gpn/lm25056 |
| http://www.ti.com/lit/gpn/lm25056a |
| * TI LM25063 |
| Prefix: 'lm25063' |
| Addresses scanned: - |
| Datasheet: |
| To be announced |
| * National Semiconductor LM25066 |
| Prefix: 'lm25066' |
| Addresses scanned: - |
| Datasheets: |
| http://www.national.com/pf/LM/LM25066.html |
| http://www.national.com/pf/LM/LM25066A.html |
| * National Semiconductor LM5064 |
| Prefix: 'lm5064' |
| Addresses scanned: - |
| Datasheet: |
| http://www.national.com/pf/LM/LM5064.html |
| * National Semiconductor LM5066 |
| Prefix: 'lm5066' |
| Addresses scanned: - |
| Datasheet: |
| http://www.national.com/pf/LM/LM5066.html |
| |
| Author: Guenter Roeck <linux@roeck-us.net> |
| |
| |
| Description |
| ----------- |
| |
| This driver supports hardware monitoring for National Semiconductor / TI LM25056, |
| LM25063, LM25066, LM5064, and LM5066 Power Management, Monitoring, Control, and |
| Protection ICs. |
| |
| The driver is a client driver to the core PMBus driver. Please see |
| Documentation/hwmon/pmbus for details on PMBus client drivers. |
| |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices for |
| details. |
| |
| |
| Platform data support |
| --------------------- |
| |
| The driver supports standard PMBus driver platform data. |
| |
| |
| Sysfs entries |
| ------------- |
| |
| The following attributes are supported. Limits are read-write; all other |
| attributes are read-only. |
| |
| in1_label "vin" |
| in1_input Measured input voltage. |
| in1_average Average measured input voltage. |
| in1_min Minimum input voltage. |
| in1_max Maximum input voltage. |
| in1_crit Critical high input voltage (LM25063 only). |
| in1_lcrit Critical low input voltage (LM25063 only). |
| in1_min_alarm Input voltage low alarm. |
| in1_max_alarm Input voltage high alarm. |
| in1_lcrit_alarm Input voltage critical low alarm (LM25063 only). |
| in1_crit_alarm Input voltage critical high alarm. (LM25063 only). |
| |
| in2_label "vmon" |
| in2_input Measured voltage on VAUX pin |
| in2_min Minimum VAUX voltage (LM25056 only). |
| in2_max Maximum VAUX voltage (LM25056 only). |
| in2_min_alarm VAUX voltage low alarm (LM25056 only). |
| in2_max_alarm VAUX voltage high alarm (LM25056 only). |
| |
| in3_label "vout1" |
| Not supported on LM25056. |
| in3_input Measured output voltage. |
| in3_average Average measured output voltage. |
| in3_min Minimum output voltage. |
| in3_min_alarm Output voltage low alarm. |
| in3_highest Historical minimum output voltage (LM25063 only). |
| in3_lowest Historical maximum output voltage (LM25063 only). |
| |
| curr1_label "iin" |
| curr1_input Measured input current. |
| curr1_average Average measured input current. |
| curr1_max Maximum input current. |
| curr1_crit Critical input current (LM25063 only). |
| curr1_max_alarm Input current high alarm. |
| curr1_crit_alarm Input current critical high alarm (LM25063 only). |
| |
| power1_label "pin" |
| power1_input Measured input power. |
| power1_average Average measured input power. |
| power1_max Maximum input power limit. |
| power1_alarm Input power alarm |
| power1_input_highest Historical maximum power. |
| power1_reset_history Write any value to reset maximum power history. |
| |
| power2_label "pout". LM25063 only. |
| power2_input Measured output power. |
| power2_max Maximum output power limit. |
| power2_crit Critical output power limit. |
| |
| temp1_input Measured temperature. |
| temp1_max Maximum temperature. |
| temp1_crit Critical high temperature. |
| temp1_max_alarm Chip temperature high alarm. |
| temp1_crit_alarm Chip temperature critical high alarm. |