| /********************************************************************* |
| * |
| * Filename: irlan_common.c |
| * Version: 0.9 |
| * Description: IrDA LAN Access Protocol Implementation |
| * Status: Experimental. |
| * Author: Dag Brattli <dagb@cs.uit.no> |
| * Created at: Sun Aug 31 20:14:37 1997 |
| * Modified at: Sun Dec 26 21:53:10 1999 |
| * Modified by: Dag Brattli <dagb@cs.uit.no> |
| * |
| * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * Neither Dag Brattli nor University of Tromsø admit liability nor |
| * provide warranty for any of this software. This material is |
| * provided "AS-IS" and at no charge. |
| * |
| ********************************************************************/ |
| |
| #include <linux/module.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/gfp.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/proc_fs.h> |
| #include <linux/sched.h> |
| #include <linux/seq_file.h> |
| #include <linux/random.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/moduleparam.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/system.h> |
| #include <asm/byteorder.h> |
| |
| #include <net/irda/irda.h> |
| #include <net/irda/irttp.h> |
| #include <net/irda/irlmp.h> |
| #include <net/irda/iriap.h> |
| #include <net/irda/timer.h> |
| |
| #include <net/irda/irlan_common.h> |
| #include <net/irda/irlan_client.h> |
| #include <net/irda/irlan_provider.h> |
| #include <net/irda/irlan_eth.h> |
| #include <net/irda/irlan_filter.h> |
| |
| |
| /* extern char sysctl_devname[]; */ |
| |
| /* |
| * Master structure |
| */ |
| static LIST_HEAD(irlans); |
| |
| static void *ckey; |
| static void *skey; |
| |
| /* Module parameters */ |
| static int eth; /* Use "eth" or "irlan" name for devices */ |
| static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */ |
| |
| #ifdef CONFIG_PROC_FS |
| static const char *const irlan_access[] = { |
| "UNKNOWN", |
| "DIRECT", |
| "PEER", |
| "HOSTED" |
| }; |
| |
| static const char *const irlan_media[] = { |
| "UNKNOWN", |
| "802.3", |
| "802.5" |
| }; |
| |
| extern struct proc_dir_entry *proc_irda; |
| |
| static int irlan_seq_open(struct inode *inode, struct file *file); |
| |
| static const struct file_operations irlan_fops = { |
| .owner = THIS_MODULE, |
| .open = irlan_seq_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release, |
| }; |
| |
| extern struct proc_dir_entry *proc_irda; |
| #endif /* CONFIG_PROC_FS */ |
| |
| static struct irlan_cb *irlan_open(__u32 saddr, __u32 daddr); |
| static void __irlan_close(struct irlan_cb *self); |
| static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, |
| __u8 value_byte, __u16 value_short, |
| __u8 *value_array, __u16 value_len); |
| static void irlan_open_unicast_addr(struct irlan_cb *self); |
| static void irlan_get_unicast_addr(struct irlan_cb *self); |
| void irlan_close_tsaps(struct irlan_cb *self); |
| |
| /* |
| * Function irlan_init (void) |
| * |
| * Initialize IrLAN layer |
| * |
| */ |
| static int __init irlan_init(void) |
| { |
| struct irlan_cb *new; |
| __u16 hints; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| #ifdef CONFIG_PROC_FS |
| { struct proc_dir_entry *proc; |
| proc = proc_create("irlan", 0, proc_irda, &irlan_fops); |
| if (!proc) { |
| printk(KERN_ERR "irlan_init: can't create /proc entry!\n"); |
| return -ENODEV; |
| } |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| hints = irlmp_service_to_hint(S_LAN); |
| |
| /* Register with IrLMP as a client */ |
| ckey = irlmp_register_client(hints, &irlan_client_discovery_indication, |
| NULL, NULL); |
| if (!ckey) |
| goto err_ckey; |
| |
| /* Register with IrLMP as a service */ |
| skey = irlmp_register_service(hints); |
| if (!skey) |
| goto err_skey; |
| |
| /* Start the master IrLAN instance (the only one for now) */ |
| new = irlan_open(DEV_ADDR_ANY, DEV_ADDR_ANY); |
| if (!new) |
| goto err_open; |
| |
| /* The master will only open its (listen) control TSAP */ |
| irlan_provider_open_ctrl_tsap(new); |
| |
| /* Do some fast discovery! */ |
| irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); |
| |
| return 0; |
| |
| err_open: |
| irlmp_unregister_service(skey); |
| err_skey: |
| irlmp_unregister_client(ckey); |
| err_ckey: |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry("irlan", proc_irda); |
| #endif /* CONFIG_PROC_FS */ |
| |
| return -ENOMEM; |
| } |
| |
| static void __exit irlan_cleanup(void) |
| { |
| struct irlan_cb *self, *next; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| irlmp_unregister_client(ckey); |
| irlmp_unregister_service(skey); |
| |
| #ifdef CONFIG_PROC_FS |
| remove_proc_entry("irlan", proc_irda); |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* Cleanup any leftover network devices */ |
| rtnl_lock(); |
| list_for_each_entry_safe(self, next, &irlans, dev_list) { |
| __irlan_close(self); |
| } |
| rtnl_unlock(); |
| } |
| |
| /* |
| * Function irlan_open (void) |
| * |
| * Open new instance of a client/provider, we should only register the |
| * network device if this instance is ment for a particular client/provider |
| */ |
| static struct irlan_cb *irlan_open(__u32 saddr, __u32 daddr) |
| { |
| struct net_device *dev; |
| struct irlan_cb *self; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| /* Create network device with irlan */ |
| dev = alloc_irlandev(eth ? "eth%d" : "irlan%d"); |
| if (!dev) |
| return NULL; |
| |
| self = netdev_priv(dev); |
| self->dev = dev; |
| |
| /* |
| * Initialize local device structure |
| */ |
| self->magic = IRLAN_MAGIC; |
| self->saddr = saddr; |
| self->daddr = daddr; |
| |
| /* Provider access can only be PEER, DIRECT, or HOSTED */ |
| self->provider.access_type = access; |
| if (access == ACCESS_DIRECT) { |
| /* |
| * Since we are emulating an IrLAN sever we will have to |
| * give ourself an ethernet address! |
| */ |
| dev->dev_addr[0] = 0x40; |
| dev->dev_addr[1] = 0x00; |
| dev->dev_addr[2] = 0x00; |
| dev->dev_addr[3] = 0x00; |
| get_random_bytes(dev->dev_addr+4, 1); |
| get_random_bytes(dev->dev_addr+5, 1); |
| } |
| |
| self->media = MEDIA_802_3; |
| self->disconnect_reason = LM_USER_REQUEST; |
| init_timer(&self->watchdog_timer); |
| init_timer(&self->client.kick_timer); |
| init_waitqueue_head(&self->open_wait); |
| |
| skb_queue_head_init(&self->client.txq); |
| |
| irlan_next_client_state(self, IRLAN_IDLE); |
| irlan_next_provider_state(self, IRLAN_IDLE); |
| |
| if (register_netdev(dev)) { |
| IRDA_DEBUG(2, "%s(), register_netdev() failed!\n", |
| __func__ ); |
| self = NULL; |
| free_netdev(dev); |
| } else { |
| rtnl_lock(); |
| list_add_rcu(&self->dev_list, &irlans); |
| rtnl_unlock(); |
| } |
| |
| return self; |
| } |
| /* |
| * Function __irlan_close (self) |
| * |
| * This function closes and deallocates the IrLAN client instances. Be |
| * aware that other functions which calls client_close() must |
| * remove self from irlans list first. |
| */ |
| static void __irlan_close(struct irlan_cb *self) |
| { |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| ASSERT_RTNL(); |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| del_timer_sync(&self->watchdog_timer); |
| del_timer_sync(&self->client.kick_timer); |
| |
| /* Close all open connections and remove TSAPs */ |
| irlan_close_tsaps(self); |
| |
| if (self->client.iriap) |
| iriap_close(self->client.iriap); |
| |
| /* Remove frames queued on the control channel */ |
| skb_queue_purge(&self->client.txq); |
| |
| /* Unregister and free self via destructor */ |
| unregister_netdevice(self->dev); |
| } |
| |
| /* Find any instance of irlan, used for client discovery wakeup */ |
| struct irlan_cb *irlan_get_any(void) |
| { |
| struct irlan_cb *self; |
| |
| list_for_each_entry_rcu(self, &irlans, dev_list) { |
| return self; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Function irlan_connect_indication (instance, sap, qos, max_sdu_size, skb) |
| * |
| * Here we receive the connect indication for the data channel |
| * |
| */ |
| static void irlan_connect_indication(void *instance, void *sap, |
| struct qos_info *qos, |
| __u32 max_sdu_size, |
| __u8 max_header_size, |
| struct sk_buff *skb) |
| { |
| struct irlan_cb *self; |
| struct tsap_cb *tsap; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| self = (struct irlan_cb *) instance; |
| tsap = (struct tsap_cb *) sap; |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| IRDA_ASSERT(tsap == self->tsap_data,return;); |
| |
| self->max_sdu_size = max_sdu_size; |
| self->max_header_size = max_header_size; |
| |
| IRDA_DEBUG(0, "%s: We are now connected!\n", __func__); |
| |
| del_timer(&self->watchdog_timer); |
| |
| /* If you want to pass the skb to *both* state machines, you will |
| * need to skb_clone() it, so that you don't free it twice. |
| * As the state machines don't need it, git rid of it here... |
| * Jean II */ |
| if (skb) |
| dev_kfree_skb(skb); |
| |
| irlan_do_provider_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL); |
| irlan_do_client_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL); |
| |
| if (self->provider.access_type == ACCESS_PEER) { |
| /* |
| * Data channel is open, so we are now allowed to |
| * configure the remote filter |
| */ |
| irlan_get_unicast_addr(self); |
| irlan_open_unicast_addr(self); |
| } |
| /* Ready to transfer Ethernet frames (at last) */ |
| netif_start_queue(self->dev); /* Clear reason */ |
| } |
| |
| static void irlan_connect_confirm(void *instance, void *sap, |
| struct qos_info *qos, |
| __u32 max_sdu_size, |
| __u8 max_header_size, |
| struct sk_buff *skb) |
| { |
| struct irlan_cb *self; |
| |
| self = (struct irlan_cb *) instance; |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| self->max_sdu_size = max_sdu_size; |
| self->max_header_size = max_header_size; |
| |
| /* TODO: we could set the MTU depending on the max_sdu_size */ |
| |
| IRDA_DEBUG(0, "%s: We are now connected!\n", __func__); |
| del_timer(&self->watchdog_timer); |
| |
| /* |
| * Data channel is open, so we are now allowed to configure the remote |
| * filter |
| */ |
| irlan_get_unicast_addr(self); |
| irlan_open_unicast_addr(self); |
| |
| /* Open broadcast and multicast filter by default */ |
| irlan_set_broadcast_filter(self, TRUE); |
| irlan_set_multicast_filter(self, TRUE); |
| |
| /* Ready to transfer Ethernet frames */ |
| netif_start_queue(self->dev); |
| self->disconnect_reason = 0; /* Clear reason */ |
| wake_up_interruptible(&self->open_wait); |
| } |
| |
| /* |
| * Function irlan_client_disconnect_indication (handle) |
| * |
| * Callback function for the IrTTP layer. Indicates a disconnection of |
| * the specified connection (handle) |
| */ |
| static void irlan_disconnect_indication(void *instance, |
| void *sap, LM_REASON reason, |
| struct sk_buff *userdata) |
| { |
| struct irlan_cb *self; |
| struct tsap_cb *tsap; |
| |
| IRDA_DEBUG(0, "%s(), reason=%d\n", __func__ , reason); |
| |
| self = (struct irlan_cb *) instance; |
| tsap = (struct tsap_cb *) sap; |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| IRDA_ASSERT(tsap != NULL, return;); |
| IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); |
| |
| IRDA_ASSERT(tsap == self->tsap_data, return;); |
| |
| IRDA_DEBUG(2, "IrLAN, data channel disconnected by peer!\n"); |
| |
| /* Save reason so we know if we should try to reconnect or not */ |
| self->disconnect_reason = reason; |
| |
| switch (reason) { |
| case LM_USER_REQUEST: /* User request */ |
| IRDA_DEBUG(2, "%s(), User requested\n", __func__ ); |
| break; |
| case LM_LAP_DISCONNECT: /* Unexpected IrLAP disconnect */ |
| IRDA_DEBUG(2, "%s(), Unexpected IrLAP disconnect\n", __func__ ); |
| break; |
| case LM_CONNECT_FAILURE: /* Failed to establish IrLAP connection */ |
| IRDA_DEBUG(2, "%s(), IrLAP connect failed\n", __func__ ); |
| break; |
| case LM_LAP_RESET: /* IrLAP reset */ |
| IRDA_DEBUG(2, "%s(), IrLAP reset\n", __func__ ); |
| break; |
| case LM_INIT_DISCONNECT: |
| IRDA_DEBUG(2, "%s(), IrLMP connect failed\n", __func__ ); |
| break; |
| default: |
| IRDA_ERROR("%s(), Unknown disconnect reason\n", __func__); |
| break; |
| } |
| |
| /* If you want to pass the skb to *both* state machines, you will |
| * need to skb_clone() it, so that you don't free it twice. |
| * As the state machines don't need it, git rid of it here... |
| * Jean II */ |
| if (userdata) |
| dev_kfree_skb(userdata); |
| |
| irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); |
| irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); |
| |
| wake_up_interruptible(&self->open_wait); |
| } |
| |
| void irlan_open_data_tsap(struct irlan_cb *self) |
| { |
| struct tsap_cb *tsap; |
| notify_t notify; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| /* Check if already open */ |
| if (self->tsap_data) |
| return; |
| |
| irda_notify_init(¬ify); |
| |
| notify.data_indication = irlan_eth_receive; |
| notify.udata_indication = irlan_eth_receive; |
| notify.connect_indication = irlan_connect_indication; |
| notify.connect_confirm = irlan_connect_confirm; |
| notify.flow_indication = irlan_eth_flow_indication; |
| notify.disconnect_indication = irlan_disconnect_indication; |
| notify.instance = self; |
| strlcpy(notify.name, "IrLAN data", sizeof(notify.name)); |
| |
| tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, ¬ify); |
| if (!tsap) { |
| IRDA_DEBUG(2, "%s(), Got no tsap!\n", __func__ ); |
| return; |
| } |
| self->tsap_data = tsap; |
| |
| /* |
| * This is the data TSAP selector which we will pass to the client |
| * when the client ask for it. |
| */ |
| self->stsap_sel_data = self->tsap_data->stsap_sel; |
| } |
| |
| void irlan_close_tsaps(struct irlan_cb *self) |
| { |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| /* Disconnect and close all open TSAP connections */ |
| if (self->tsap_data) { |
| irttp_disconnect_request(self->tsap_data, NULL, P_NORMAL); |
| irttp_close_tsap(self->tsap_data); |
| self->tsap_data = NULL; |
| } |
| if (self->client.tsap_ctrl) { |
| irttp_disconnect_request(self->client.tsap_ctrl, NULL, |
| P_NORMAL); |
| irttp_close_tsap(self->client.tsap_ctrl); |
| self->client.tsap_ctrl = NULL; |
| } |
| if (self->provider.tsap_ctrl) { |
| irttp_disconnect_request(self->provider.tsap_ctrl, NULL, |
| P_NORMAL); |
| irttp_close_tsap(self->provider.tsap_ctrl); |
| self->provider.tsap_ctrl = NULL; |
| } |
| self->disconnect_reason = LM_USER_REQUEST; |
| } |
| |
| /* |
| * Function irlan_ias_register (self, tsap_sel) |
| * |
| * Register with LM-IAS |
| * |
| */ |
| void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel) |
| { |
| struct ias_object *obj; |
| struct ias_value *new_value; |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| /* |
| * Check if object has already been registered by a previous provider. |
| * If that is the case, we just change the value of the attribute |
| */ |
| if (!irias_find_object("IrLAN")) { |
| obj = irias_new_object("IrLAN", IAS_IRLAN_ID); |
| irias_add_integer_attrib(obj, "IrDA:TinyTP:LsapSel", tsap_sel, |
| IAS_KERNEL_ATTR); |
| irias_insert_object(obj); |
| } else { |
| new_value = irias_new_integer_value(tsap_sel); |
| irias_object_change_attribute("IrLAN", "IrDA:TinyTP:LsapSel", |
| new_value); |
| } |
| |
| /* Register PnP object only if not registered before */ |
| if (!irias_find_object("PnP")) { |
| obj = irias_new_object("PnP", IAS_PNP_ID); |
| #if 0 |
| irias_add_string_attrib(obj, "Name", sysctl_devname, |
| IAS_KERNEL_ATTR); |
| #else |
| irias_add_string_attrib(obj, "Name", "Linux", IAS_KERNEL_ATTR); |
| #endif |
| irias_add_string_attrib(obj, "DeviceID", "HWP19F0", |
| IAS_KERNEL_ATTR); |
| irias_add_integer_attrib(obj, "CompCnt", 1, IAS_KERNEL_ATTR); |
| if (self->provider.access_type == ACCESS_PEER) |
| irias_add_string_attrib(obj, "Comp#01", "PNP8389", |
| IAS_KERNEL_ATTR); |
| else |
| irias_add_string_attrib(obj, "Comp#01", "PNP8294", |
| IAS_KERNEL_ATTR); |
| |
| irias_add_string_attrib(obj, "Manufacturer", |
| "Linux-IrDA Project", IAS_KERNEL_ATTR); |
| irias_insert_object(obj); |
| } |
| } |
| |
| /* |
| * Function irlan_run_ctrl_tx_queue (self) |
| * |
| * Try to send the next command in the control transmit queue |
| * |
| */ |
| int irlan_run_ctrl_tx_queue(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| if (irda_lock(&self->client.tx_busy) == FALSE) |
| return -EBUSY; |
| |
| skb = skb_dequeue(&self->client.txq); |
| if (!skb) { |
| self->client.tx_busy = FALSE; |
| return 0; |
| } |
| |
| /* Check that it's really possible to send commands */ |
| if ((self->client.tsap_ctrl == NULL) || |
| (self->client.state == IRLAN_IDLE)) |
| { |
| self->client.tx_busy = FALSE; |
| dev_kfree_skb(skb); |
| return -1; |
| } |
| IRDA_DEBUG(2, "%s(), sending ...\n", __func__ ); |
| |
| return irttp_data_request(self->client.tsap_ctrl, skb); |
| } |
| |
| /* |
| * Function irlan_ctrl_data_request (self, skb) |
| * |
| * This function makes sure that commands on the control channel is being |
| * sent in a command/response fashion |
| */ |
| static void irlan_ctrl_data_request(struct irlan_cb *self, struct sk_buff *skb) |
| { |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| /* Queue command */ |
| skb_queue_tail(&self->client.txq, skb); |
| |
| /* Try to send command */ |
| irlan_run_ctrl_tx_queue(self); |
| } |
| |
| /* |
| * Function irlan_get_provider_info (self) |
| * |
| * Send Get Provider Information command to peer IrLAN layer |
| * |
| */ |
| void irlan_get_provider_info(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER, |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| /* Reserve space for TTP, LMP, and LAP header */ |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| frame[0] = CMD_GET_PROVIDER_INFO; |
| frame[1] = 0x00; /* Zero parameters */ |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function irlan_open_data_channel (self) |
| * |
| * Send an Open Data Command to provider |
| * |
| */ |
| void irlan_open_data_channel(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3") + |
| IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "DIRECT"), |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| /* Build frame */ |
| frame[0] = CMD_OPEN_DATA_CHANNEL; |
| frame[1] = 0x02; /* Two parameters */ |
| |
| irlan_insert_string_param(skb, "MEDIA", "802.3"); |
| irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT"); |
| /* irlan_insert_string_param(skb, "MODE", "UNRELIABLE"); */ |
| |
| /* self->use_udata = TRUE; */ |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| void irlan_close_data_channel(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| /* Check if the TSAP is still there */ |
| if (self->client.tsap_ctrl == NULL) |
| return; |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN"), |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| /* Build frame */ |
| frame[0] = CMD_CLOSE_DATA_CHAN; |
| frame[1] = 0x01; /* One parameter */ |
| |
| irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function irlan_open_unicast_addr (self) |
| * |
| * Make IrLAN provider accept ethernet frames addressed to the unicast |
| * address. |
| * |
| */ |
| static void irlan_open_unicast_addr(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + |
| IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + |
| IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"), |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| /* Reserve space for TTP, LMP, and LAP header */ |
| skb_reserve(skb, self->max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| frame[0] = CMD_FILTER_OPERATION; |
| frame[1] = 0x03; /* Three parameters */ |
| irlan_insert_byte_param(skb, "DATA_CHAN" , self->dtsap_sel_data); |
| irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); |
| irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function irlan_set_broadcast_filter (self, status) |
| * |
| * Make IrLAN provider accept ethernet frames addressed to the broadcast |
| * address. Be careful with the use of this one, since there may be a lot |
| * of broadcast traffic out there. We can still function without this |
| * one but then _we_ have to initiate all communication with other |
| * hosts, since ARP request for this host will not be answered. |
| */ |
| void irlan_set_broadcast_filter(struct irlan_cb *self, int status) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + |
| IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") + |
| /* We may waste one byte here...*/ |
| IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"), |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| /* Reserve space for TTP, LMP, and LAP header */ |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| frame[0] = CMD_FILTER_OPERATION; |
| frame[1] = 0x03; /* Three parameters */ |
| irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); |
| irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST"); |
| if (status) |
| irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); |
| else |
| irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function irlan_set_multicast_filter (self, status) |
| * |
| * Make IrLAN provider accept ethernet frames addressed to the multicast |
| * address. |
| * |
| */ |
| void irlan_set_multicast_filter(struct irlan_cb *self, int status) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + |
| IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") + |
| /* We may waste one byte here...*/ |
| IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "NONE"), |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| /* Reserve space for TTP, LMP, and LAP header */ |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| frame[0] = CMD_FILTER_OPERATION; |
| frame[1] = 0x03; /* Three parameters */ |
| irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); |
| irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST"); |
| if (status) |
| irlan_insert_string_param(skb, "FILTER_MODE", "ALL"); |
| else |
| irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function irlan_get_unicast_addr (self) |
| * |
| * Retrieves the unicast address from the IrLAN provider. This address |
| * will be inserted into the devices structure, so the ethernet layer |
| * can construct its packets. |
| * |
| */ |
| static void irlan_get_unicast_addr(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(2, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + |
| IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + |
| IRLAN_STRING_PARAMETER_LEN("FILTER_OPERATION", |
| "DYNAMIC"), |
| GFP_ATOMIC); |
| if (!skb) |
| return; |
| |
| /* Reserve space for TTP, LMP, and LAP header */ |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| frame[0] = CMD_FILTER_OPERATION; |
| frame[1] = 0x03; /* Three parameters */ |
| irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); |
| irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); |
| irlan_insert_string_param(skb, "FILTER_OPERATION", "DYNAMIC"); |
| |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function irlan_get_media_char (self) |
| * |
| * |
| * |
| */ |
| void irlan_get_media_char(struct irlan_cb *self) |
| { |
| struct sk_buff *skb; |
| __u8 *frame; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| IRDA_ASSERT(self != NULL, return;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); |
| |
| skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + |
| IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3"), |
| GFP_ATOMIC); |
| |
| if (!skb) |
| return; |
| |
| /* Reserve space for TTP, LMP, and LAP header */ |
| skb_reserve(skb, self->client.max_header_size); |
| skb_put(skb, 2); |
| |
| frame = skb->data; |
| |
| /* Build frame */ |
| frame[0] = CMD_GET_MEDIA_CHAR; |
| frame[1] = 0x01; /* One parameter */ |
| |
| irlan_insert_string_param(skb, "MEDIA", "802.3"); |
| irlan_ctrl_data_request(self, skb); |
| } |
| |
| /* |
| * Function insert_byte_param (skb, param, value) |
| * |
| * Insert byte parameter into frame |
| * |
| */ |
| int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value) |
| { |
| return __irlan_insert_param(skb, param, IRLAN_BYTE, value, 0, NULL, 0); |
| } |
| |
| int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value) |
| { |
| return __irlan_insert_param(skb, param, IRLAN_SHORT, 0, value, NULL, 0); |
| } |
| |
| /* |
| * Function insert_string (skb, param, value) |
| * |
| * Insert string parameter into frame |
| * |
| */ |
| int irlan_insert_string_param(struct sk_buff *skb, char *param, char *string) |
| { |
| int string_len = strlen(string); |
| |
| return __irlan_insert_param(skb, param, IRLAN_ARRAY, 0, 0, string, |
| string_len); |
| } |
| |
| /* |
| * Function insert_array_param(skb, param, value, len_value) |
| * |
| * Insert array parameter into frame |
| * |
| */ |
| int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *array, |
| __u16 array_len) |
| { |
| return __irlan_insert_param(skb, name, IRLAN_ARRAY, 0, 0, array, |
| array_len); |
| } |
| |
| /* |
| * Function insert_param (skb, param, value, byte) |
| * |
| * Insert parameter at end of buffer, structure of a parameter is: |
| * |
| * ----------------------------------------------------------------------- |
| * | Name Length[1] | Param Name[1..255] | Val Length[2] | Value[0..1016]| |
| * ----------------------------------------------------------------------- |
| */ |
| static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, |
| __u8 value_byte, __u16 value_short, |
| __u8 *value_array, __u16 value_len) |
| { |
| __u8 *frame; |
| __u8 param_len; |
| __le16 tmp_le; /* Temporary value in little endian format */ |
| int n=0; |
| |
| if (skb == NULL) { |
| IRDA_DEBUG(2, "%s(), Got NULL skb\n", __func__ ); |
| return 0; |
| } |
| |
| param_len = strlen(param); |
| switch (type) { |
| case IRLAN_BYTE: |
| value_len = 1; |
| break; |
| case IRLAN_SHORT: |
| value_len = 2; |
| break; |
| case IRLAN_ARRAY: |
| IRDA_ASSERT(value_array != NULL, return 0;); |
| IRDA_ASSERT(value_len > 0, return 0;); |
| break; |
| default: |
| IRDA_DEBUG(2, "%s(), Unknown parameter type!\n", __func__ ); |
| return 0; |
| break; |
| } |
| |
| /* Insert at end of sk-buffer */ |
| frame = skb_tail_pointer(skb); |
| |
| /* Make space for data */ |
| if (skb_tailroom(skb) < (param_len+value_len+3)) { |
| IRDA_DEBUG(2, "%s(), No more space at end of skb\n", __func__ ); |
| return 0; |
| } |
| skb_put(skb, param_len+value_len+3); |
| |
| /* Insert parameter length */ |
| frame[n++] = param_len; |
| |
| /* Insert parameter */ |
| memcpy(frame+n, param, param_len); n += param_len; |
| |
| /* Insert value length (2 byte little endian format, LSB first) */ |
| tmp_le = cpu_to_le16(value_len); |
| memcpy(frame+n, &tmp_le, 2); n += 2; /* To avoid alignment problems */ |
| |
| /* Insert value */ |
| switch (type) { |
| case IRLAN_BYTE: |
| frame[n++] = value_byte; |
| break; |
| case IRLAN_SHORT: |
| tmp_le = cpu_to_le16(value_short); |
| memcpy(frame+n, &tmp_le, 2); n += 2; |
| break; |
| case IRLAN_ARRAY: |
| memcpy(frame+n, value_array, value_len); n+=value_len; |
| break; |
| default: |
| break; |
| } |
| IRDA_ASSERT(n == (param_len+value_len+3), return 0;); |
| |
| return param_len+value_len+3; |
| } |
| |
| /* |
| * Function irlan_extract_param (buf, name, value, len) |
| * |
| * Extracts a single parameter name/value pair from buffer and updates |
| * the buffer pointer to point to the next name/value pair. |
| */ |
| int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len) |
| { |
| __u8 name_len; |
| __u16 val_len; |
| int n=0; |
| |
| IRDA_DEBUG(4, "%s()\n", __func__ ); |
| |
| /* get length of parameter name (1 byte) */ |
| name_len = buf[n++]; |
| |
| if (name_len > 254) { |
| IRDA_DEBUG(2, "%s(), name_len > 254\n", __func__ ); |
| return -RSP_INVALID_COMMAND_FORMAT; |
| } |
| |
| /* get parameter name */ |
| memcpy(name, buf+n, name_len); |
| name[name_len] = '\0'; |
| n+=name_len; |
| |
| /* |
| * Get length of parameter value (2 bytes in little endian |
| * format) |
| */ |
| memcpy(&val_len, buf+n, 2); /* To avoid alignment problems */ |
| le16_to_cpus(&val_len); n+=2; |
| |
| if (val_len > 1016) { |
| IRDA_DEBUG(2, "%s(), parameter length to long\n", __func__ ); |
| return -RSP_INVALID_COMMAND_FORMAT; |
| } |
| *len = val_len; |
| |
| /* get parameter value */ |
| memcpy(value, buf+n, val_len); |
| value[val_len] = '\0'; |
| n+=val_len; |
| |
| IRDA_DEBUG(4, "Parameter: %s ", name); |
| IRDA_DEBUG(4, "Value: %s\n", value); |
| |
| return n; |
| } |
| |
| #ifdef CONFIG_PROC_FS |
| |
| /* |
| * Start of reading /proc entries. |
| * Return entry at pos, |
| * or start_token to indicate print header line |
| * or NULL if end of file |
| */ |
| static void *irlan_seq_start(struct seq_file *seq, loff_t *pos) |
| { |
| rcu_read_lock(); |
| return seq_list_start_head(&irlans, *pos); |
| } |
| |
| /* Return entry after v, and increment pos */ |
| static void *irlan_seq_next(struct seq_file *seq, void *v, loff_t *pos) |
| { |
| return seq_list_next(v, &irlans, pos); |
| } |
| |
| /* End of reading /proc file */ |
| static void irlan_seq_stop(struct seq_file *seq, void *v) |
| { |
| rcu_read_unlock(); |
| } |
| |
| |
| /* |
| * Show one entry in /proc file. |
| */ |
| static int irlan_seq_show(struct seq_file *seq, void *v) |
| { |
| if (v == &irlans) |
| seq_puts(seq, "IrLAN instances:\n"); |
| else { |
| struct irlan_cb *self = list_entry(v, struct irlan_cb, dev_list); |
| |
| IRDA_ASSERT(self != NULL, return -1;); |
| IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); |
| |
| seq_printf(seq,"ifname: %s,\n", |
| self->dev->name); |
| seq_printf(seq,"client state: %s, ", |
| irlan_state[ self->client.state]); |
| seq_printf(seq,"provider state: %s,\n", |
| irlan_state[ self->provider.state]); |
| seq_printf(seq,"saddr: %#08x, ", |
| self->saddr); |
| seq_printf(seq,"daddr: %#08x\n", |
| self->daddr); |
| seq_printf(seq,"version: %d.%d,\n", |
| self->version[1], self->version[0]); |
| seq_printf(seq,"access type: %s\n", |
| irlan_access[self->client.access_type]); |
| seq_printf(seq,"media: %s\n", |
| irlan_media[self->media]); |
| |
| seq_printf(seq,"local filter:\n"); |
| seq_printf(seq,"remote filter: "); |
| irlan_print_filter(seq, self->client.filter_type); |
| seq_printf(seq,"tx busy: %s\n", |
| netif_queue_stopped(self->dev) ? "TRUE" : "FALSE"); |
| |
| seq_putc(seq,'\n'); |
| } |
| return 0; |
| } |
| |
| static const struct seq_operations irlan_seq_ops = { |
| .start = irlan_seq_start, |
| .next = irlan_seq_next, |
| .stop = irlan_seq_stop, |
| .show = irlan_seq_show, |
| }; |
| |
| static int irlan_seq_open(struct inode *inode, struct file *file) |
| { |
| return seq_open(file, &irlan_seq_ops); |
| } |
| #endif |
| |
| MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); |
| MODULE_DESCRIPTION("The Linux IrDA LAN protocol"); |
| MODULE_LICENSE("GPL"); |
| |
| module_param(eth, bool, 0); |
| MODULE_PARM_DESC(eth, "Name devices ethX (0) or irlanX (1)"); |
| module_param(access, int, 0); |
| MODULE_PARM_DESC(access, "Access type DIRECT=1, PEER=2, HOSTED=3"); |
| |
| module_init(irlan_init); |
| module_exit(irlan_cleanup); |
| |