drivers/watchdog/s3c2410_wdt.c - kernel/msm-4.9 - Gitiles

 /* linux/drivers/char/watchdog/s3c2410_wdt.c
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 Watchdog Timer Support
  *
  * Based on, softdog.c by Alan Cox,
  *     (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/timer.h>
 #include <linux/watchdog.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>

 #define S3C2410_WTCON		0x00
 #define S3C2410_WTDAT		0x04
 #define S3C2410_WTCNT		0x08

 #define S3C2410_WTCON_RSTEN	(1 << 0)
 #define S3C2410_WTCON_INTEN	(1 << 2)
 #define S3C2410_WTCON_ENABLE	(1 << 5)

 #define S3C2410_WTCON_DIV16	(0 << 3)
 #define S3C2410_WTCON_DIV32	(1 << 3)
 #define S3C2410_WTCON_DIV64	(2 << 3)
 #define S3C2410_WTCON_DIV128	(3 << 3)

 #define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
 #define S3C2410_WTCON_PRESCALE_MASK	(0xff << 8)

 #define CONFIG_S3C2410_WATCHDOG_ATBOOT		(0)
 #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)

 #define EXYNOS5_RST_STAT_REG_OFFSET		0x0404
 #define EXYNOS5_WDT_DISABLE_REG_OFFSET		0x0408
 #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET	0x040c
 #define QUIRK_HAS_PMU_CONFIG			(1 << 0)
 #define QUIRK_HAS_RST_STAT			(1 << 1)

 /* These quirks require that we have a PMU register map */
 #define QUIRKS_HAVE_PMUREG			(QUIRK_HAS_PMU_CONFIG | \
 						 QUIRK_HAS_RST_STAT)

 static bool nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
 static int soft_noboot;
 static int debug;

 module_param(tmr_margin,  int, 0);
 module_param(tmr_atboot,  int, 0);
 module_param(nowayout,   bool, 0);
 module_param(soft_noboot, int, 0);
 module_param(debug,	  int, 0);

 MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
 		__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
 MODULE_PARM_DESC(tmr_atboot,
 		"Watchdog is started at boot time if set to 1, default="
 			__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
 			"0 to reboot (default 0)");
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");

 /**
  * struct s3c2410_wdt_variant - Per-variant config data
  *
  * @disable_reg: Offset in pmureg for the register that disables the watchdog
  * timer reset functionality.
  * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
  * timer reset functionality.
  * @mask_bit: Bit number for the watchdog timer in the disable register and the
  * mask reset register.
  * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
  * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
  * reset.
  * @quirks: A bitfield of quirks.
  */

 struct s3c2410_wdt_variant {
 	int disable_reg;
 	int mask_reset_reg;
 	int mask_bit;
 	int rst_stat_reg;
 	int rst_stat_bit;
 	u32 quirks;
 };

 struct s3c2410_wdt {
 	struct device		*dev;
 	struct clk		*clock;
 	void __iomem		*reg_base;
 	unsigned int		count;
 	spinlock_t		lock;
 	unsigned long		wtcon_save;
 	unsigned long		wtdat_save;
 	struct watchdog_device	wdt_device;
 	struct notifier_block	freq_transition;
 	struct s3c2410_wdt_variant *drv_data;
 	struct regmap *pmureg;
 };

 static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
 	.quirks = 0
 };

 #ifdef CONFIG_OF
 static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
 	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
 	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
 	.mask_bit = 20,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 20,
 	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
 };

 static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
 	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
 	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
 	.mask_bit = 0,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 9,
 	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
 };

 static const struct of_device_id s3c2410_wdt_match[] = {
 	{ .compatible = "samsung,s3c2410-wdt",
 	  .data = &drv_data_s3c2410 },
 	{ .compatible = "samsung,exynos5250-wdt",
 	  .data = &drv_data_exynos5250 },
 	{ .compatible = "samsung,exynos5420-wdt",
 	  .data = &drv_data_exynos5420 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
 #endif

 static const struct platform_device_id s3c2410_wdt_ids[] = {
 	{
 		.name = "s3c2410-wdt",
 		.driver_data = (unsigned long)&drv_data_s3c2410,
 	},
 	{}
 };
 MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);

 /* watchdog control routines */

 #define DBG(fmt, ...)					\
 do {							\
 	if (debug)					\
 		pr_info(fmt, ##__VA_ARGS__);		\
 } while (0)

 /* functions */

 static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
 {
 	return container_of(nb, struct s3c2410_wdt, freq_transition);
 }

 static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
 {
 	int ret;
 	u32 mask_val = 1 << wdt->drv_data->mask_bit;
 	u32 val = 0;

 	/* No need to do anything if no PMU CONFIG needed */
 	if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG))
 		return 0;

 	if (mask)
 		val = mask_val;

 	ret = regmap_update_bits(wdt->pmureg,
 			wdt->drv_data->disable_reg,
 			mask_val, val);
 	if (ret < 0)
 		goto error;

 	ret = regmap_update_bits(wdt->pmureg,
 			wdt->drv_data->mask_reset_reg,
 			mask_val, val);
  error:
 	if (ret < 0)
 		dev_err(wdt->dev, "failed to update reg(%d)\n", ret);

 	return ret;
 }

 static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
 {
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);

 	spin_lock(&wdt->lock);
 	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
 	spin_unlock(&wdt->lock);

 	return 0;
 }

 static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt)
 {
 	unsigned long wtcon;

 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
 	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
 }

 static int s3c2410wdt_stop(struct watchdog_device *wdd)
 {
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);

 	spin_lock(&wdt->lock);
 	__s3c2410wdt_stop(wdt);
 	spin_unlock(&wdt->lock);

 	return 0;
 }

 static int s3c2410wdt_start(struct watchdog_device *wdd)
 {
 	unsigned long wtcon;
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);

 	spin_lock(&wdt->lock);

 	__s3c2410wdt_stop(wdt);

 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;

 	if (soft_noboot) {
 		wtcon |= S3C2410_WTCON_INTEN;
 		wtcon &= ~S3C2410_WTCON_RSTEN;
 	} else {
 		wtcon &= ~S3C2410_WTCON_INTEN;
 		wtcon |= S3C2410_WTCON_RSTEN;
 	}

 	DBG("%s: count=0x%08x, wtcon=%08lx\n",
 	    __func__, wdt->count, wtcon);

 	writel(wdt->count, wdt->reg_base + S3C2410_WTDAT);
 	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
 	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
 	spin_unlock(&wdt->lock);

 	return 0;
 }

 static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
 {
 	return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
 }

 static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
 {
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
 	unsigned long freq = clk_get_rate(wdt->clock);
 	unsigned int count;
 	unsigned int divisor = 1;
 	unsigned long wtcon;

 	if (timeout < 1)
 		return -EINVAL;

 	freq = DIV_ROUND_UP(freq, 128);
 	count = timeout * freq;

 	DBG("%s: count=%d, timeout=%d, freq=%lu\n",
 	    __func__, count, timeout, freq);

 	/* if the count is bigger than the watchdog register,
 	   then work out what we need to do (and if) we can
 	   actually make this value
 	*/

 	if (count >= 0x10000) {
 		divisor = DIV_ROUND_UP(count, 0xffff);

 		if (divisor > 0x100) {
 			dev_err(wdt->dev, "timeout %d too big\n", timeout);
 			return -EINVAL;
 		}
 	}

 	DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
 	    __func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor));

 	count = DIV_ROUND_UP(count, divisor);
 	wdt->count = count;

 	/* update the pre-scaler */
 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
 	wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
 	wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);

 	writel(count, wdt->reg_base + S3C2410_WTDAT);
 	writel(wtcon, wdt->reg_base + S3C2410_WTCON);

 	wdd->timeout = (count * divisor) / freq;

 	return 0;
 }

 #define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)

 static const struct watchdog_info s3c2410_wdt_ident = {
 	.options          =     OPTIONS,
 	.firmware_version =	0,
 	.identity         =	"S3C2410 Watchdog",
 };

 static struct watchdog_ops s3c2410wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = s3c2410wdt_start,
 	.stop = s3c2410wdt_stop,
 	.ping = s3c2410wdt_keepalive,
 	.set_timeout = s3c2410wdt_set_heartbeat,
 };

 static struct watchdog_device s3c2410_wdd = {
 	.info = &s3c2410_wdt_ident,
 	.ops = &s3c2410wdt_ops,
 	.timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
 };

 /* interrupt handler code */

 static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
 {
 	struct s3c2410_wdt *wdt = platform_get_drvdata(param);

 	dev_info(wdt->dev, "watchdog timer expired (irq)\n");

 	s3c2410wdt_keepalive(&wdt->wdt_device);
 	return IRQ_HANDLED;
 }

 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ

 static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
 					  unsigned long val, void *data)
 {
 	int ret;
 	struct s3c2410_wdt *wdt = freq_to_wdt(nb);

 	if (!s3c2410wdt_is_running(wdt))
 		goto done;

 	if (val == CPUFREQ_PRECHANGE) {
 		/* To ensure that over the change we don't cause the
 		 * watchdog to trigger, we perform an keep-alive if
 		 * the watchdog is running.
 		 */

 		s3c2410wdt_keepalive(&wdt->wdt_device);
 	} else if (val == CPUFREQ_POSTCHANGE) {
 		s3c2410wdt_stop(&wdt->wdt_device);

 		ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
 						wdt->wdt_device.timeout);

 		if (ret >= 0)
 			s3c2410wdt_start(&wdt->wdt_device);
 		else
 			goto err;
 	}

 done:
 	return 0;

  err:
 	dev_err(wdt->dev, "cannot set new value for timeout %d\n",
 				wdt->wdt_device.timeout);
 	return ret;
 }

 static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
 {
 	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;

 	return cpufreq_register_notifier(&wdt->freq_transition,
 					 CPUFREQ_TRANSITION_NOTIFIER);
 }

 static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
 {
 	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;

 	cpufreq_unregister_notifier(&wdt->freq_transition,
 				    CPUFREQ_TRANSITION_NOTIFIER);
 }

 #else

 static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
 {
 	return 0;
 }

 static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
 {
 }
 #endif

 static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
 {
 	unsigned int rst_stat;
 	int ret;

 	if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
 		return 0;

 	ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
 	if (ret)
 		dev_warn(wdt->dev, "Couldn't get RST_STAT register\n");
 	else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit))
 		return WDIOF_CARDRESET;

 	return 0;
 }

 /* s3c2410_get_wdt_driver_data */
 static inline struct s3c2410_wdt_variant *
 get_wdt_drv_data(struct platform_device *pdev)
 {
 	if (pdev->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node);
 		return (struct s3c2410_wdt_variant *)match->data;
 	} else {
 		return (struct s3c2410_wdt_variant *)
 			platform_get_device_id(pdev)->driver_data;
 	}
 }

 static int s3c2410wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev;
 	struct s3c2410_wdt *wdt;
 	struct resource *wdt_mem;
 	struct resource *wdt_irq;
 	unsigned int wtcon;
 	int started = 0;
 	int ret;

 	DBG("%s: probe=%p\n", __func__, pdev);

 	dev = &pdev->dev;

 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 	if (!wdt)
 		return -ENOMEM;

 	wdt->dev = &pdev->dev;
 	spin_lock_init(&wdt->lock);
 	wdt->wdt_device = s3c2410_wdd;

 	wdt->drv_data = get_wdt_drv_data(pdev);
 	if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) {
 		wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
 						"samsung,syscon-phandle");
 		if (IS_ERR(wdt->pmureg)) {
 			dev_err(dev, "syscon regmap lookup failed.\n");
 			return PTR_ERR(wdt->pmureg);
 		}
 	}

 	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (wdt_irq == NULL) {
 		dev_err(dev, "no irq resource specified\n");
 		ret = -ENOENT;
 		goto err;
 	}

 	/* get the memory region for the watchdog timer */
 	wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	wdt->reg_base = devm_ioremap_resource(dev, wdt_mem);
 	if (IS_ERR(wdt->reg_base)) {
 		ret = PTR_ERR(wdt->reg_base);
 		goto err;
 	}

 	DBG("probe: mapped reg_base=%p\n", wdt->reg_base);

 	wdt->clock = devm_clk_get(dev, "watchdog");
 	if (IS_ERR(wdt->clock)) {
 		dev_err(dev, "failed to find watchdog clock source\n");
 		ret = PTR_ERR(wdt->clock);
 		goto err;
 	}

 	clk_prepare_enable(wdt->clock);

 	ret = s3c2410wdt_cpufreq_register(wdt);
 	if (ret < 0) {
 		dev_err(dev, "failed to register cpufreq\n");
 		goto err_clk;
 	}

 	watchdog_set_drvdata(&wdt->wdt_device, wdt);

 	/* see if we can actually set the requested timer margin, and if
 	 * not, try the default value */

 	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, &pdev->dev);
 	ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
 					wdt->wdt_device.timeout);
 	if (ret) {
 		started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
 					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);

 		if (started == 0)
 			dev_info(dev,
 			   "tmr_margin value out of range, default %d used\n",
 			       CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 		else
 			dev_info(dev, "default timer value is out of range, "
 							"cannot start\n");
 	}

 	ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
 				pdev->name, pdev);
 	if (ret != 0) {
 		dev_err(dev, "failed to install irq (%d)\n", ret);
 		goto err_cpufreq;
 	}

 	watchdog_set_nowayout(&wdt->wdt_device, nowayout);

 	wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);

 	ret = watchdog_register_device(&wdt->wdt_device);
 	if (ret) {
 		dev_err(dev, "cannot register watchdog (%d)\n", ret);
 		goto err_cpufreq;
 	}

 	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
 	if (ret < 0)
 		goto err_unregister;

 	if (tmr_atboot && started == 0) {
 		dev_info(dev, "starting watchdog timer\n");
 		s3c2410wdt_start(&wdt->wdt_device);
 	} else if (!tmr_atboot) {
 		/* if we're not enabling the watchdog, then ensure it is
 		 * disabled if it has been left running from the bootloader
 		 * or other source */

 		s3c2410wdt_stop(&wdt->wdt_device);
 	}

 	platform_set_drvdata(pdev, wdt);

 	/* print out a statement of readiness */

 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);

 	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
 		 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
 		 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");

 	return 0;

  err_unregister:
 	watchdog_unregister_device(&wdt->wdt_device);

  err_cpufreq:
 	s3c2410wdt_cpufreq_deregister(wdt);

  err_clk:
 	clk_disable_unprepare(wdt->clock);
 	wdt->clock = NULL;

  err:
 	return ret;
 }

 static int s3c2410wdt_remove(struct platform_device *dev)
 {
 	int ret;
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);

 	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
 	if (ret < 0)
 		return ret;

 	watchdog_unregister_device(&wdt->wdt_device);

 	s3c2410wdt_cpufreq_deregister(wdt);

 	clk_disable_unprepare(wdt->clock);
 	wdt->clock = NULL;

 	return 0;
 }

 static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);

 	s3c2410wdt_mask_and_disable_reset(wdt, true);

 	s3c2410wdt_stop(&wdt->wdt_device);
 }

 #ifdef CONFIG_PM_SLEEP

 static int s3c2410wdt_suspend(struct device *dev)
 {
 	int ret;
 	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);

 	/* Save watchdog state, and turn it off. */
 	wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
 	wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);

 	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
 	if (ret < 0)
 		return ret;

 	/* Note that WTCNT doesn't need to be saved. */
 	s3c2410wdt_stop(&wdt->wdt_device);

 	return 0;
 }

 static int s3c2410wdt_resume(struct device *dev)
 {
 	int ret;
 	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);

 	/* Restore watchdog state. */
 	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT);
 	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
 	writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);

 	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
 	if (ret < 0)
 		return ret;

 	dev_info(dev, "watchdog %sabled\n",
 		(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");

 	return 0;
 }
 #endif

 static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
 			s3c2410wdt_resume);

 static struct platform_driver s3c2410wdt_driver = {
 	.probe		= s3c2410wdt_probe,
 	.remove		= s3c2410wdt_remove,
 	.shutdown	= s3c2410wdt_shutdown,
 	.id_table	= s3c2410_wdt_ids,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "s3c2410-wdt",
 		.pm	= &s3c2410wdt_pm_ops,
 		.of_match_table	= of_match_ptr(s3c2410_wdt_match),
 	},
 };

 module_platform_driver(s3c2410wdt_driver);

 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
 	      "Dimitry Andric <dimitry.andric@tomtom.com>");
 MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
 MODULE_LICENSE("GPL");
	/* linux/drivers/char/watchdog/s3c2410_wdt.c
	*
	* Copyright (c) 2004 Simtec Electronics
	* Ben Dooks <ben@simtec.co.uk>
	*
	* S3C2410 Watchdog Timer Support
	*
	* Based on, softdog.c by Alan Cox,
	* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/module.h>
	#include <linux/moduleparam.h>
	#include <linux/types.h>
	#include <linux/timer.h>
	#include <linux/watchdog.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/interrupt.h>
	#include <linux/clk.h>
	#include <linux/uaccess.h>
	#include <linux/io.h>
	#include <linux/cpufreq.h>
	#include <linux/slab.h>
	#include <linux/err.h>
	#include <linux/of.h>
	#include <linux/mfd/syscon.h>
	#include <linux/regmap.h>

	#define S3C2410_WTCON 0x00
	#define S3C2410_WTDAT 0x04
	#define S3C2410_WTCNT 0x08

	#define S3C2410_WTCON_RSTEN (1 << 0)
	#define S3C2410_WTCON_INTEN (1 << 2)
	#define S3C2410_WTCON_ENABLE (1 << 5)

	#define S3C2410_WTCON_DIV16 (0 << 3)
	#define S3C2410_WTCON_DIV32 (1 << 3)
	#define S3C2410_WTCON_DIV64 (2 << 3)
	#define S3C2410_WTCON_DIV128 (3 << 3)

	#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
	#define S3C2410_WTCON_PRESCALE_MASK (0xff << 8)

	#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
	#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)

	#define EXYNOS5_RST_STAT_REG_OFFSET 0x0404
	#define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408
	#define EXYNOS5_WDT_MASK_RESET_REG_OFFSET 0x040c
	#define QUIRK_HAS_PMU_CONFIG (1 << 0)
	#define QUIRK_HAS_RST_STAT (1 << 1)

	/* These quirks require that we have a PMU register map */
	#define QUIRKS_HAVE_PMUREG (QUIRK_HAS_PMU_CONFIG \| \
	QUIRK_HAS_RST_STAT)

	static bool nowayout = WATCHDOG_NOWAYOUT;
	static int tmr_margin;
	static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
	static int soft_noboot;
	static int debug;

	module_param(tmr_margin, int, 0);
	module_param(tmr_atboot, int, 0);
	module_param(nowayout, bool, 0);
	module_param(soft_noboot, int, 0);
	module_param(debug, int, 0);

	MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
	__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
	MODULE_PARM_DESC(tmr_atboot,
	"Watchdog is started at boot time if set to 1, default="
	__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
	MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
	MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
	"0 to reboot (default 0)");
	MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");

	/**
	* struct s3c2410_wdt_variant - Per-variant config data
	*
	* @disable_reg: Offset in pmureg for the register that disables the watchdog
	* timer reset functionality.
	* @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
	* timer reset functionality.
	* @mask_bit: Bit number for the watchdog timer in the disable register and the
	* mask reset register.
	* @rst_stat_reg: Offset in pmureg for the register that has the reset status.
	* @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
	* reset.
	* @quirks: A bitfield of quirks.
	*/

	struct s3c2410_wdt_variant {
	int disable_reg;
	int mask_reset_reg;
	int mask_bit;
	int rst_stat_reg;
	int rst_stat_bit;
	u32 quirks;
	};

	struct s3c2410_wdt {
	struct device *dev;
	struct clk *clock;
	void __iomem *reg_base;
	unsigned int count;
	spinlock_t lock;
	unsigned long wtcon_save;
	unsigned long wtdat_save;
	struct watchdog_device wdt_device;
	struct notifier_block freq_transition;
	struct s3c2410_wdt_variant *drv_data;
	struct regmap *pmureg;
	};

	static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
	.quirks = 0
	};

	#ifdef CONFIG_OF
	static const struct s3c2410_wdt_variant drv_data_exynos5250 = {
	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
	.mask_bit = 20,
	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
	.rst_stat_bit = 20,
	.quirks = QUIRK_HAS_PMU_CONFIG \| QUIRK_HAS_RST_STAT,
	};

	static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
	.mask_bit = 0,
	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
	.rst_stat_bit = 9,
	.quirks = QUIRK_HAS_PMU_CONFIG \| QUIRK_HAS_RST_STAT,
	};

	static const struct of_device_id s3c2410_wdt_match[] = {
	{ .compatible = "samsung,s3c2410-wdt",
	.data = &drv_data_s3c2410 },
	{ .compatible = "samsung,exynos5250-wdt",
	.data = &drv_data_exynos5250 },
	{ .compatible = "samsung,exynos5420-wdt",
	.data = &drv_data_exynos5420 },
	{},
	};
	MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
	#endif

	static const struct platform_device_id s3c2410_wdt_ids[] = {
	{
	.name = "s3c2410-wdt",
	.driver_data = (unsigned long)&drv_data_s3c2410,
	},
	{}
	};
	MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);

	/* watchdog control routines */

	#define DBG(fmt, ...) \
	do { \
	if (debug) \
	pr_info(fmt, ##__VA_ARGS__); \
	} while (0)

	/* functions */

	static inline struct s3c2410_wdt freq_to_wdt(struct notifier_block nb)
	{
	return container_of(nb, struct s3c2410_wdt, freq_transition);
	}

	static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
	{
	int ret;
	u32 mask_val = 1 << wdt->drv_data->mask_bit;
	u32 val = 0;

	/* No need to do anything if no PMU CONFIG needed */
	if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG))
	return 0;

	if (mask)
	val = mask_val;

	ret = regmap_update_bits(wdt->pmureg,
	wdt->drv_data->disable_reg,
	mask_val, val);
	if (ret < 0)
	goto error;

	ret = regmap_update_bits(wdt->pmureg,
	wdt->drv_data->mask_reset_reg,
	mask_val, val);
	error:
	if (ret < 0)
	dev_err(wdt->dev, "failed to update reg(%d)\n", ret);

	return ret;
	}

	static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
	{
	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);

	spin_lock(&wdt->lock);
	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
	spin_unlock(&wdt->lock);

	return 0;
	}

	static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt)
	{
	unsigned long wtcon;

	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
	wtcon &= ~(S3C2410_WTCON_ENABLE \| S3C2410_WTCON_RSTEN);
	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
	}

	static int s3c2410wdt_stop(struct watchdog_device *wdd)
	{
	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);

	spin_lock(&wdt->lock);
	__s3c2410wdt_stop(wdt);
	spin_unlock(&wdt->lock);

	return 0;
	}

	static int s3c2410wdt_start(struct watchdog_device *wdd)
	{
	unsigned long wtcon;
	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);

	spin_lock(&wdt->lock);

	__s3c2410wdt_stop(wdt);

	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
	wtcon \|= S3C2410_WTCON_ENABLE \| S3C2410_WTCON_DIV128;

	if (soft_noboot) {
	wtcon \|= S3C2410_WTCON_INTEN;
	wtcon &= ~S3C2410_WTCON_RSTEN;
	} else {
	wtcon &= ~S3C2410_WTCON_INTEN;
	wtcon \|= S3C2410_WTCON_RSTEN;
	}

	DBG("%s: count=0x%08x, wtcon=%08lx\n",
	__func__, wdt->count, wtcon);

	writel(wdt->count, wdt->reg_base + S3C2410_WTDAT);
	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
	spin_unlock(&wdt->lock);

	return 0;
	}

	static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
	{
	return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
	}

	static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
	{
	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
	unsigned long freq = clk_get_rate(wdt->clock);
	unsigned int count;
	unsigned int divisor = 1;
	unsigned long wtcon;

	if (timeout < 1)
	return -EINVAL;

	freq = DIV_ROUND_UP(freq, 128);
	count = timeout * freq;

	DBG("%s: count=%d, timeout=%d, freq=%lu\n",
	__func__, count, timeout, freq);

	/* if the count is bigger than the watchdog register,
	then work out what we need to do (and if) we can
	actually make this value
	*/

	if (count >= 0x10000) {
	divisor = DIV_ROUND_UP(count, 0xffff);

	if (divisor > 0x100) {
	dev_err(wdt->dev, "timeout %d too big\n", timeout);
	return -EINVAL;
	}
	}

	DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
	__func__, timeout, divisor, count, DIV_ROUND_UP(count, divisor));

	count = DIV_ROUND_UP(count, divisor);
	wdt->count = count;

	/* update the pre-scaler */
	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
	wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
	wtcon \|= S3C2410_WTCON_PRESCALE(divisor-1);

	writel(count, wdt->reg_base + S3C2410_WTDAT);
	writel(wtcon, wdt->reg_base + S3C2410_WTCON);

	wdd->timeout = (count * divisor) / freq;

	return 0;
	}

	#define OPTIONS (WDIOF_SETTIMEOUT \| WDIOF_KEEPALIVEPING \| WDIOF_MAGICCLOSE)

	static const struct watchdog_info s3c2410_wdt_ident = {
	.options = OPTIONS,
	.firmware_version = 0,
	.identity = "S3C2410 Watchdog",
	};

	static struct watchdog_ops s3c2410wdt_ops = {
	.owner = THIS_MODULE,
	.start = s3c2410wdt_start,
	.stop = s3c2410wdt_stop,
	.ping = s3c2410wdt_keepalive,
	.set_timeout = s3c2410wdt_set_heartbeat,
	};

	static struct watchdog_device s3c2410_wdd = {
	.info = &s3c2410_wdt_ident,
	.ops = &s3c2410wdt_ops,
	.timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
	};

	/* interrupt handler code */

	static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
	{
	struct s3c2410_wdt *wdt = platform_get_drvdata(param);

	dev_info(wdt->dev, "watchdog timer expired (irq)\n");

	s3c2410wdt_keepalive(&wdt->wdt_device);
	return IRQ_HANDLED;
	}

	#ifdef CONFIG_ARM_S3C24XX_CPUFREQ

	static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
	unsigned long val, void *data)
	{
	int ret;
	struct s3c2410_wdt *wdt = freq_to_wdt(nb);

	if (!s3c2410wdt_is_running(wdt))
	goto done;

	if (val == CPUFREQ_PRECHANGE) {
	/* To ensure that over the change we don't cause the
	* watchdog to trigger, we perform an keep-alive if
	* the watchdog is running.
	*/

	s3c2410wdt_keepalive(&wdt->wdt_device);
	} else if (val == CPUFREQ_POSTCHANGE) {
	s3c2410wdt_stop(&wdt->wdt_device);

	ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
	wdt->wdt_device.timeout);

	if (ret >= 0)
	s3c2410wdt_start(&wdt->wdt_device);
	else
	goto err;
	}

	done:
	return 0;

	err:
	dev_err(wdt->dev, "cannot set new value for timeout %d\n",
	wdt->wdt_device.timeout);
	return ret;
	}

	static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
	{
	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;

	return cpufreq_register_notifier(&wdt->freq_transition,
	CPUFREQ_TRANSITION_NOTIFIER);
	}

	static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
	{
	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;

	cpufreq_unregister_notifier(&wdt->freq_transition,
	CPUFREQ_TRANSITION_NOTIFIER);
	}

	#else

	static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
	{
	return 0;
	}

	static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
	{
	}
	#endif

	static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
	{
	unsigned int rst_stat;
	int ret;

	if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
	return 0;

	ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
	if (ret)
	dev_warn(wdt->dev, "Couldn't get RST_STAT register\n");
	else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit))
	return WDIOF_CARDRESET;

	return 0;
	}

	/* s3c2410_get_wdt_driver_data */
	static inline struct s3c2410_wdt_variant *
	get_wdt_drv_data(struct platform_device *pdev)
	{
	if (pdev->dev.of_node) {
	const struct of_device_id *match;
	match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node);
	return (struct s3c2410_wdt_variant *)match->data;
	} else {
	return (struct s3c2410_wdt_variant *)
	platform_get_device_id(pdev)->driver_data;
	}
	}

	static int s3c2410wdt_probe(struct platform_device *pdev)
	{
	struct device *dev;
	struct s3c2410_wdt *wdt;
	struct resource *wdt_mem;
	struct resource *wdt_irq;
	unsigned int wtcon;
	int started = 0;
	int ret;

	DBG("%s: probe=%p\n", __func__, pdev);

	dev = &pdev->dev;

	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
	if (!wdt)
	return -ENOMEM;

	wdt->dev = &pdev->dev;
	spin_lock_init(&wdt->lock);
	wdt->wdt_device = s3c2410_wdd;

	wdt->drv_data = get_wdt_drv_data(pdev);
	if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) {
	wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
	"samsung,syscon-phandle");
	if (IS_ERR(wdt->pmureg)) {
	dev_err(dev, "syscon regmap lookup failed.\n");
	return PTR_ERR(wdt->pmureg);
	}
	}

	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
	if (wdt_irq == NULL) {
	dev_err(dev, "no irq resource specified\n");
	ret = -ENOENT;
	goto err;
	}

	/* get the memory region for the watchdog timer */
	wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	wdt->reg_base = devm_ioremap_resource(dev, wdt_mem);
	if (IS_ERR(wdt->reg_base)) {
	ret = PTR_ERR(wdt->reg_base);
	goto err;
	}

	DBG("probe: mapped reg_base=%p\n", wdt->reg_base);

	wdt->clock = devm_clk_get(dev, "watchdog");
	if (IS_ERR(wdt->clock)) {
	dev_err(dev, "failed to find watchdog clock source\n");
	ret = PTR_ERR(wdt->clock);
	goto err;
	}

	clk_prepare_enable(wdt->clock);

	ret = s3c2410wdt_cpufreq_register(wdt);
	if (ret < 0) {
	dev_err(dev, "failed to register cpufreq\n");
	goto err_clk;
	}

	watchdog_set_drvdata(&wdt->wdt_device, wdt);

	/* see if we can actually set the requested timer margin, and if
	* not, try the default value */

	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, &pdev->dev);
	ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
	wdt->wdt_device.timeout);
	if (ret) {
	started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
	CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);

	if (started == 0)
	dev_info(dev,
	"tmr_margin value out of range, default %d used\n",
	CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
	else
	dev_info(dev, "default timer value is out of range, "
	"cannot start\n");
	}

	ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
	pdev->name, pdev);
	if (ret != 0) {
	dev_err(dev, "failed to install irq (%d)\n", ret);
	goto err_cpufreq;
	}

	watchdog_set_nowayout(&wdt->wdt_device, nowayout);

	wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);

	ret = watchdog_register_device(&wdt->wdt_device);
	if (ret) {
	dev_err(dev, "cannot register watchdog (%d)\n", ret);
	goto err_cpufreq;
	}

	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
	if (ret < 0)
	goto err_unregister;

	if (tmr_atboot && started == 0) {
	dev_info(dev, "starting watchdog timer\n");
	s3c2410wdt_start(&wdt->wdt_device);
	} else if (!tmr_atboot) {
	/* if we're not enabling the watchdog, then ensure it is
	* disabled if it has been left running from the bootloader
	* or other source */

	s3c2410wdt_stop(&wdt->wdt_device);
	}

	platform_set_drvdata(pdev, wdt);

	/* print out a statement of readiness */

	wtcon = readl(wdt->reg_base + S3C2410_WTCON);

	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
	(wtcon & S3C2410_WTCON_ENABLE) ? "" : "in",
	(wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
	(wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");

	return 0;

	err_unregister:
	watchdog_unregister_device(&wdt->wdt_device);

	err_cpufreq:
	s3c2410wdt_cpufreq_deregister(wdt);

	err_clk:
	clk_disable_unprepare(wdt->clock);
	wdt->clock = NULL;

	err:
	return ret;
	}

	static int s3c2410wdt_remove(struct platform_device *dev)
	{
	int ret;
	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);

	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
	if (ret < 0)
	return ret;

	watchdog_unregister_device(&wdt->wdt_device);

	s3c2410wdt_cpufreq_deregister(wdt);

	clk_disable_unprepare(wdt->clock);
	wdt->clock = NULL;

	return 0;
	}

	static void s3c2410wdt_shutdown(struct platform_device *dev)
	{
	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);

	s3c2410wdt_mask_and_disable_reset(wdt, true);

	s3c2410wdt_stop(&wdt->wdt_device);
	}

	#ifdef CONFIG_PM_SLEEP

	static int s3c2410wdt_suspend(struct device *dev)
	{
	int ret;
	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);

	/* Save watchdog state, and turn it off. */
	wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
	wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);

	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
	if (ret < 0)
	return ret;

	/* Note that WTCNT doesn't need to be saved. */
	s3c2410wdt_stop(&wdt->wdt_device);

	return 0;
	}

	static int s3c2410wdt_resume(struct device *dev)
	{
	int ret;
	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);

	/* Restore watchdog state. */
	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT);
	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
	writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);

	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
	if (ret < 0)
	return ret;

	dev_info(dev, "watchdog %sabled\n",
	(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");

	return 0;
	}
	#endif

	static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
	s3c2410wdt_resume);

	static struct platform_driver s3c2410wdt_driver = {
	.probe = s3c2410wdt_probe,
	.remove = s3c2410wdt_remove,
	.shutdown = s3c2410wdt_shutdown,
	.id_table = s3c2410_wdt_ids,
	.driver = {
	.owner = THIS_MODULE,
	.name = "s3c2410-wdt",
	.pm = &s3c2410wdt_pm_ops,
	.of_match_table = of_match_ptr(s3c2410_wdt_match),
	},
	};

	module_platform_driver(s3c2410wdt_driver);

	MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
	"Dimitry Andric <dimitry.andric@tomtom.com>");
	MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
	MODULE_LICENSE("GPL");