| /* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _SDE_HW_CTL_H |
| #define _SDE_HW_CTL_H |
| |
| #include "sde_hw_mdss.h" |
| #include "sde_hw_util.h" |
| #include "sde_hw_catalog.h" |
| #include "sde_hw_sspp.h" |
| #include "sde_hw_blk.h" |
| |
| /** |
| * sde_ctl_mode_sel: Interface mode selection |
| * SDE_CTL_MODE_SEL_VID: Video mode interface |
| * SDE_CTL_MODE_SEL_CMD: Command mode interface |
| */ |
| enum sde_ctl_mode_sel { |
| SDE_CTL_MODE_SEL_VID = 0, |
| SDE_CTL_MODE_SEL_CMD |
| }; |
| |
| /** |
| * sde_ctl_rot_op_mode - inline rotation mode |
| * SDE_CTL_ROT_OP_MODE_OFFLINE: offline rotation |
| * SDE_CTL_ROT_OP_MODE_RESERVED: reserved |
| * SDE_CTL_ROT_OP_MODE_INLINE_SYNC: inline rotation synchronous mode |
| * SDE_CTL_ROT_OP_MODE_INLINE_ASYNC: inline rotation asynchronous mode |
| */ |
| enum sde_ctl_rot_op_mode { |
| SDE_CTL_ROT_OP_MODE_OFFLINE, |
| SDE_CTL_ROT_OP_MODE_RESERVED, |
| SDE_CTL_ROT_OP_MODE_INLINE_SYNC, |
| SDE_CTL_ROT_OP_MODE_INLINE_ASYNC, |
| }; |
| |
| struct sde_hw_ctl; |
| /** |
| * struct sde_hw_stage_cfg - blending stage cfg |
| * @stage : SSPP_ID at each stage |
| * @multirect_index: index of the rectangle of SSPP. |
| */ |
| struct sde_hw_stage_cfg { |
| enum sde_sspp stage[SDE_STAGE_MAX][PIPES_PER_STAGE]; |
| enum sde_sspp_multirect_index multirect_index |
| [SDE_STAGE_MAX][PIPES_PER_STAGE]; |
| }; |
| |
| /** |
| * struct sde_hw_intf_cfg :Describes how the SDE writes data to output interface |
| * @intf : Interface id |
| * @wb: Writeback id |
| * @mode_3d: 3d mux configuration |
| * @intf_mode_sel: Interface mode, cmd / vid |
| * @stream_sel: Stream selection for multi-stream interfaces |
| */ |
| struct sde_hw_intf_cfg { |
| enum sde_intf intf; |
| enum sde_wb wb; |
| enum sde_3d_blend_mode mode_3d; |
| enum sde_ctl_mode_sel intf_mode_sel; |
| int stream_sel; |
| }; |
| |
| /** |
| * struct sde_ctl_sbuf_cfg - control for stream buffer configuration |
| * @rot_op_mode: rotator operation mode |
| */ |
| struct sde_ctl_sbuf_cfg { |
| enum sde_ctl_rot_op_mode rot_op_mode; |
| }; |
| |
| /** |
| * struct sde_hw_ctl_ops - Interface to the wb Hw driver functions |
| * Assumption is these functions will be called after clocks are enabled |
| */ |
| struct sde_hw_ctl_ops { |
| /** |
| * kickoff hw operation for Sw controlled interfaces |
| * DSI cmd mode and WB interface are SW controlled |
| * @ctx : ctl path ctx pointer |
| */ |
| void (*trigger_start)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * kickoff prepare is in progress hw operation for sw |
| * controlled interfaces: DSI cmd mode and WB interface |
| * are SW controlled |
| * @ctx : ctl path ctx pointer |
| */ |
| void (*trigger_pending)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * kickoff rotator operation for Sw controlled interfaces |
| * DSI cmd mode and WB interface are SW controlled |
| * @ctx : ctl path ctx pointer |
| */ |
| void (*trigger_rot_start)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * Clear the value of the cached pending_flush_mask |
| * No effect on hardware |
| * @ctx : ctl path ctx pointer |
| */ |
| void (*clear_pending_flush)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * Query the value of the cached pending_flush_mask |
| * No effect on hardware |
| * @ctx : ctl path ctx pointer |
| */ |
| u32 (*get_pending_flush)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * OR in the given flushbits to the cached pending_flush_mask |
| * No effect on hardware |
| * @ctx : ctl path ctx pointer |
| * @flushbits : module flushmask |
| */ |
| void (*update_pending_flush)(struct sde_hw_ctl *ctx, |
| u32 flushbits); |
| |
| /** |
| * Write the value of the pending_flush_mask to hardware |
| * @ctx : ctl path ctx pointer |
| */ |
| void (*trigger_flush)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * Read the value of the flush register |
| * @ctx : ctl path ctx pointer |
| * @Return: value of the ctl flush register. |
| */ |
| u32 (*get_flush_register)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * Setup ctl_path interface config |
| * @ctx |
| * @cfg : interface config structure pointer |
| */ |
| void (*setup_intf_cfg)(struct sde_hw_ctl *ctx, |
| struct sde_hw_intf_cfg *cfg); |
| |
| int (*reset)(struct sde_hw_ctl *c); |
| |
| /* |
| * wait_reset_status - checks ctl reset status |
| * @ctx : ctl path ctx pointer |
| * |
| * This function checks the ctl reset status bit. |
| * If the reset bit is set, it keeps polling the status till the hw |
| * reset is complete. |
| * Returns: 0 on success or -error if reset incomplete within interval |
| */ |
| int (*wait_reset_status)(struct sde_hw_ctl *ctx); |
| |
| uint32_t (*get_bitmask_sspp)(struct sde_hw_ctl *ctx, |
| enum sde_sspp blk); |
| |
| uint32_t (*get_bitmask_mixer)(struct sde_hw_ctl *ctx, |
| enum sde_lm blk); |
| |
| int (*get_bitmask_dspp)(struct sde_hw_ctl *ctx, |
| u32 *flushbits, |
| enum sde_dspp blk); |
| |
| int (*get_bitmask_dspp_pavlut)(struct sde_hw_ctl *ctx, |
| u32 *flushbits, |
| enum sde_dspp blk); |
| |
| int (*get_bitmask_intf)(struct sde_hw_ctl *ctx, |
| u32 *flushbits, |
| enum sde_intf blk); |
| |
| int (*get_bitmask_cdm)(struct sde_hw_ctl *ctx, |
| u32 *flushbits, |
| enum sde_cdm blk); |
| |
| int (*get_bitmask_wb)(struct sde_hw_ctl *ctx, |
| u32 *flushbits, |
| enum sde_wb blk); |
| |
| int (*get_bitmask_rot)(struct sde_hw_ctl *ctx, |
| u32 *flushbits, |
| enum sde_rot blk); |
| |
| /** |
| * Set all blend stages to disabled |
| * @ctx : ctl path ctx pointer |
| */ |
| void (*clear_all_blendstages)(struct sde_hw_ctl *ctx); |
| |
| /** |
| * Configure layer mixer to pipe configuration |
| * @ctx : ctl path ctx pointer |
| * @lm : layer mixer enumeration |
| * @cfg : blend stage configuration |
| */ |
| void (*setup_blendstage)(struct sde_hw_ctl *ctx, |
| enum sde_lm lm, struct sde_hw_stage_cfg *cfg); |
| |
| void (*setup_sbuf_cfg)(struct sde_hw_ctl *ctx, |
| struct sde_ctl_sbuf_cfg *cfg); |
| |
| /** |
| * Flush the reg dma by sending last command. |
| * @ctx : ctl path ctx pointer |
| * @blocking : if set to true api will block until flush is done |
| */ |
| void (*reg_dma_flush)(struct sde_hw_ctl *ctx, bool blocking); |
| |
| }; |
| |
| /** |
| * struct sde_hw_ctl : CTL PATH driver object |
| * @base: hardware block base structure |
| * @hw: block register map object |
| * @idx: control path index |
| * @caps: control path capabilities |
| * @mixer_count: number of mixers |
| * @mixer_hw_caps: mixer hardware capabilities |
| * @pending_flush_mask: storage for pending ctl_flush managed via ops |
| * @ops: operation list |
| */ |
| struct sde_hw_ctl { |
| struct sde_hw_blk base; |
| struct sde_hw_blk_reg_map hw; |
| |
| /* ctl path */ |
| int idx; |
| const struct sde_ctl_cfg *caps; |
| int mixer_count; |
| const struct sde_lm_cfg *mixer_hw_caps; |
| u32 pending_flush_mask; |
| |
| /* ops */ |
| struct sde_hw_ctl_ops ops; |
| }; |
| |
| /** |
| * sde_hw_ctl - convert base object sde_hw_base to container |
| * @hw: Pointer to base hardware block |
| * return: Pointer to hardware block container |
| */ |
| static inline struct sde_hw_ctl *to_sde_hw_ctl(struct sde_hw_blk *hw) |
| { |
| return container_of(hw, struct sde_hw_ctl, base); |
| } |
| |
| /** |
| * sde_hw_ctl_init(): Initializes the ctl_path hw driver object. |
| * should be called before accessing every ctl path registers. |
| * @idx: ctl_path index for which driver object is required |
| * @addr: mapped register io address of MDP |
| * @m : pointer to mdss catalog data |
| */ |
| struct sde_hw_ctl *sde_hw_ctl_init(enum sde_ctl idx, |
| void __iomem *addr, |
| struct sde_mdss_cfg *m); |
| |
| /** |
| * sde_hw_ctl_destroy(): Destroys ctl driver context |
| * should be called to free the context |
| */ |
| void sde_hw_ctl_destroy(struct sde_hw_ctl *ctx); |
| |
| #endif /*_SDE_HW_CTL_H */ |