| /******************************************************************************* |
| * |
| * Intel Ethernet Controller XL710 Family Linux Driver |
| * Copyright(c) 2013 - 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| ******************************************************************************/ |
| |
| |
| #include <linux/if_ether.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/fc/fc_fs.h> |
| #include <scsi/fc/fc_fip.h> |
| #include <scsi/fc/fc_fcoe.h> |
| #include <scsi/libfc.h> |
| #include <scsi/libfcoe.h> |
| #include <uapi/linux/dcbnl.h> |
| |
| #include "i40e.h" |
| #include "i40e_fcoe.h" |
| |
| /** |
| * i40e_rx_is_fcoe - returns true if the rx packet type is FCoE |
| * @ptype: the packet type field from rx descriptor write-back |
| **/ |
| static inline bool i40e_rx_is_fcoe(u16 ptype) |
| { |
| return (ptype >= I40E_RX_PTYPE_L2_FCOE_PAY3) && |
| (ptype <= I40E_RX_PTYPE_L2_FCOE_VFT_FCOTHER); |
| } |
| |
| /** |
| * i40e_fcoe_sof_is_class2 - returns true if this is a FC Class 2 SOF |
| * @sof: the FCoE start of frame delimiter |
| **/ |
| static inline bool i40e_fcoe_sof_is_class2(u8 sof) |
| { |
| return (sof == FC_SOF_I2) || (sof == FC_SOF_N2); |
| } |
| |
| /** |
| * i40e_fcoe_sof_is_class3 - returns true if this is a FC Class 3 SOF |
| * @sof: the FCoE start of frame delimiter |
| **/ |
| static inline bool i40e_fcoe_sof_is_class3(u8 sof) |
| { |
| return (sof == FC_SOF_I3) || (sof == FC_SOF_N3); |
| } |
| |
| /** |
| * i40e_fcoe_sof_is_supported - returns true if the FC SOF is supported by HW |
| * @sof: the input SOF value from the frame |
| **/ |
| static inline bool i40e_fcoe_sof_is_supported(u8 sof) |
| { |
| return i40e_fcoe_sof_is_class2(sof) || |
| i40e_fcoe_sof_is_class3(sof); |
| } |
| |
| /** |
| * i40e_fcoe_fc_sof - pull the SOF from FCoE header in the frame |
| * @skb: the frame whose EOF is to be pulled from |
| **/ |
| static inline int i40e_fcoe_fc_sof(struct sk_buff *skb, u8 *sof) |
| { |
| *sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof; |
| |
| if (!i40e_fcoe_sof_is_supported(*sof)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_eof_is_supported - returns true if the EOF is supported by HW |
| * @eof: the input EOF value from the frame |
| **/ |
| static inline bool i40e_fcoe_eof_is_supported(u8 eof) |
| { |
| return (eof == FC_EOF_N) || (eof == FC_EOF_T) || |
| (eof == FC_EOF_NI) || (eof == FC_EOF_A); |
| } |
| |
| /** |
| * i40e_fcoe_fc_eof - pull EOF from FCoE trailer in the frame |
| * @skb: the frame whose EOF is to be pulled from |
| **/ |
| static inline int i40e_fcoe_fc_eof(struct sk_buff *skb, u8 *eof) |
| { |
| /* the first byte of the last dword is EOF */ |
| skb_copy_bits(skb, skb->len - 4, eof, 1); |
| |
| if (!i40e_fcoe_eof_is_supported(*eof)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_ctxt_eof - convert input FC EOF for descriptor programming |
| * @eof: the input eof value from the frame |
| * |
| * The FC EOF is converted to the value understood by HW for descriptor |
| * programming. Never call this w/o calling i40e_fcoe_eof_is_supported() |
| * first. |
| **/ |
| static inline u32 i40e_fcoe_ctxt_eof(u8 eof) |
| { |
| switch (eof) { |
| case FC_EOF_N: |
| return I40E_TX_DESC_CMD_L4T_EOFT_EOF_N; |
| case FC_EOF_T: |
| return I40E_TX_DESC_CMD_L4T_EOFT_EOF_T; |
| case FC_EOF_NI: |
| return I40E_TX_DESC_CMD_L4T_EOFT_EOF_NI; |
| case FC_EOF_A: |
| return I40E_TX_DESC_CMD_L4T_EOFT_EOF_A; |
| default: |
| /* FIXME: still returns 0 */ |
| pr_err("Unrecognized EOF %x\n", eof); |
| return 0; |
| } |
| } |
| |
| /** |
| * i40e_fcoe_xid_is_valid - returns true if the exchange id is valid |
| * @xid: the exchange id |
| **/ |
| static inline bool i40e_fcoe_xid_is_valid(u16 xid) |
| { |
| return (xid != FC_XID_UNKNOWN) && (xid < I40E_FCOE_DDP_MAX); |
| } |
| |
| /** |
| * i40e_fcoe_ddp_unmap - unmap the mapped sglist associated |
| * @pf: pointer to pf |
| * @ddp: sw DDP context |
| * |
| * Unmap the scatter-gather list associated with the given SW DDP context |
| * |
| * Returns: data length already ddp-ed in bytes |
| * |
| **/ |
| static inline void i40e_fcoe_ddp_unmap(struct i40e_pf *pf, |
| struct i40e_fcoe_ddp *ddp) |
| { |
| if (test_and_set_bit(__I40E_FCOE_DDP_UNMAPPED, &ddp->flags)) |
| return; |
| |
| if (ddp->sgl) { |
| dma_unmap_sg(&pf->pdev->dev, ddp->sgl, ddp->sgc, |
| DMA_FROM_DEVICE); |
| ddp->sgl = NULL; |
| ddp->sgc = 0; |
| } |
| |
| if (ddp->pool) { |
| dma_pool_free(ddp->pool, ddp->udl, ddp->udp); |
| ddp->pool = NULL; |
| } |
| } |
| |
| /** |
| * i40e_fcoe_ddp_clear - clear the given SW DDP context |
| * @ddp - SW DDP context |
| **/ |
| static inline void i40e_fcoe_ddp_clear(struct i40e_fcoe_ddp *ddp) |
| { |
| memset(ddp, 0, sizeof(struct i40e_fcoe_ddp)); |
| ddp->xid = FC_XID_UNKNOWN; |
| ddp->flags = __I40E_FCOE_DDP_NONE; |
| } |
| |
| /** |
| * i40e_fcoe_progid_is_fcoe - check if the prog_id is for FCoE |
| * @id: the prog id for the programming status Rx descriptor write-back |
| **/ |
| static inline bool i40e_fcoe_progid_is_fcoe(u8 id) |
| { |
| return (id == I40E_RX_PROG_STATUS_DESC_FCOE_CTXT_PROG_STATUS) || |
| (id == I40E_RX_PROG_STATUS_DESC_FCOE_CTXT_INVL_STATUS); |
| } |
| |
| /** |
| * i40e_fcoe_fc_get_xid - get xid from the frame header |
| * @fh: the fc frame header |
| * |
| * In case the incoming frame's exchange is originated from |
| * the initiator, then received frame's exchange id is ANDed |
| * with fc_cpu_mask bits to get the same cpu on which exchange |
| * was originated, otherwise just use the current cpu. |
| * |
| * Returns ox_id if exchange originator, rx_id if responder |
| **/ |
| static inline u16 i40e_fcoe_fc_get_xid(struct fc_frame_header *fh) |
| { |
| u32 f_ctl = ntoh24(fh->fh_f_ctl); |
| |
| return (f_ctl & FC_FC_EX_CTX) ? |
| be16_to_cpu(fh->fh_ox_id) : |
| be16_to_cpu(fh->fh_rx_id); |
| } |
| |
| /** |
| * i40e_fcoe_fc_frame_header - get fc frame header from skb |
| * @skb: packet |
| * |
| * This checks if there is a VLAN header and returns the data |
| * pointer to the start of the fc_frame_header. |
| * |
| * Returns pointer to the fc_frame_header |
| **/ |
| static inline struct fc_frame_header *i40e_fcoe_fc_frame_header( |
| struct sk_buff *skb) |
| { |
| void *fh = skb->data + sizeof(struct fcoe_hdr); |
| |
| if (eth_hdr(skb)->h_proto == htons(ETH_P_8021Q)) |
| fh += sizeof(struct vlan_hdr); |
| |
| return (struct fc_frame_header *)fh; |
| } |
| |
| /** |
| * i40e_fcoe_ddp_put - release the DDP context for a given exchange id |
| * @netdev: the corresponding net_device |
| * @xid: the exchange id that corresponding DDP context will be released |
| * |
| * This is the implementation of net_device_ops.ndo_fcoe_ddp_done |
| * and it is expected to be called by ULD, i.e., FCP layer of libfc |
| * to release the corresponding ddp context when the I/O is done. |
| * |
| * Returns : data length already ddp-ed in bytes |
| **/ |
| static int i40e_fcoe_ddp_put(struct net_device *netdev, u16 xid) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_pf *pf = np->vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| int len = 0; |
| struct i40e_fcoe_ddp *ddp = &fcoe->ddp[xid]; |
| |
| if (!fcoe || !ddp) |
| goto out; |
| |
| if (test_bit(__I40E_FCOE_DDP_DONE, &ddp->flags)) |
| len = ddp->len; |
| i40e_fcoe_ddp_unmap(pf, ddp); |
| out: |
| return len; |
| } |
| |
| /** |
| * i40e_fcoe_sw_init - sets up the HW for FCoE |
| * @pf: pointer to pf |
| * |
| * Returns 0 if FCoE is supported otherwise the error code |
| **/ |
| int i40e_init_pf_fcoe(struct i40e_pf *pf) |
| { |
| struct i40e_hw *hw = &pf->hw; |
| u32 val; |
| |
| pf->flags &= ~I40E_FLAG_FCOE_ENABLED; |
| pf->num_fcoe_qps = 0; |
| pf->fcoe_hmc_cntx_num = 0; |
| pf->fcoe_hmc_filt_num = 0; |
| |
| if (!pf->hw.func_caps.fcoe) { |
| dev_info(&pf->pdev->dev, "FCoE capability is disabled\n"); |
| return 0; |
| } |
| |
| if (!pf->hw.func_caps.dcb) { |
| dev_warn(&pf->pdev->dev, |
| "Hardware is not DCB capable not enabling FCoE.\n"); |
| return 0; |
| } |
| |
| /* enable FCoE hash filter */ |
| val = rd32(hw, I40E_PFQF_HENA(1)); |
| val |= 1 << (I40E_FILTER_PCTYPE_FCOE_OX - 32); |
| val |= 1 << (I40E_FILTER_PCTYPE_FCOE_RX - 32); |
| val &= I40E_PFQF_HENA_PTYPE_ENA_MASK; |
| wr32(hw, I40E_PFQF_HENA(1), val); |
| |
| /* enable flag */ |
| pf->flags |= I40E_FLAG_FCOE_ENABLED; |
| pf->num_fcoe_qps = I40E_DEFAULT_FCOE; |
| |
| /* Reserve 4K DDP contexts and 20K filter size for FCoE */ |
| pf->fcoe_hmc_cntx_num = (1 << I40E_DMA_CNTX_SIZE_4K) * |
| I40E_DMA_CNTX_BASE_SIZE; |
| pf->fcoe_hmc_filt_num = pf->fcoe_hmc_cntx_num + |
| (1 << I40E_HASH_FILTER_SIZE_16K) * |
| I40E_HASH_FILTER_BASE_SIZE; |
| |
| /* FCoE object: max 16K filter buckets and 4K DMA contexts */ |
| pf->filter_settings.fcoe_filt_num = I40E_HASH_FILTER_SIZE_16K; |
| pf->filter_settings.fcoe_cntx_num = I40E_DMA_CNTX_SIZE_4K; |
| |
| /* Setup max frame with FCoE_MTU plus L2 overheads */ |
| val = rd32(hw, I40E_GLFCOE_RCTL); |
| val &= ~I40E_GLFCOE_RCTL_MAX_SIZE_MASK; |
| val |= ((FCOE_MTU + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN) |
| << I40E_GLFCOE_RCTL_MAX_SIZE_SHIFT); |
| wr32(hw, I40E_GLFCOE_RCTL, val); |
| |
| dev_info(&pf->pdev->dev, "FCoE is supported.\n"); |
| return 0; |
| } |
| |
| /** |
| * i40e_get_fcoe_tc_map - Return TC map for FCoE APP |
| * @pf: pointer to pf |
| * |
| **/ |
| u8 i40e_get_fcoe_tc_map(struct i40e_pf *pf) |
| { |
| struct i40e_dcb_app_priority_table app; |
| struct i40e_hw *hw = &pf->hw; |
| u8 enabled_tc = 0; |
| u8 tc, i; |
| /* Get the FCoE APP TLV */ |
| struct i40e_dcbx_config *dcbcfg = &hw->local_dcbx_config; |
| |
| for (i = 0; i < dcbcfg->numapps; i++) { |
| app = dcbcfg->app[i]; |
| if (app.selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && |
| app.protocolid == ETH_P_FCOE) { |
| tc = dcbcfg->etscfg.prioritytable[app.priority]; |
| enabled_tc |= (1 << tc); |
| break; |
| } |
| } |
| |
| /* TC0 if there is no TC defined for FCoE APP TLV */ |
| enabled_tc = enabled_tc ? enabled_tc : 0x1; |
| |
| return enabled_tc; |
| } |
| |
| /** |
| * i40e_fcoe_vsi_init - prepares the VSI context for creating a FCoE VSI |
| * @vsi: pointer to the associated VSI struct |
| * @ctxt: pointer to the associated VSI context to be passed to HW |
| * |
| * Returns 0 on success or < 0 on error |
| **/ |
| int i40e_fcoe_vsi_init(struct i40e_vsi *vsi, struct i40e_vsi_context *ctxt) |
| { |
| struct i40e_aqc_vsi_properties_data *info = &ctxt->info; |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_hw *hw = &pf->hw; |
| u8 enabled_tc = 0; |
| |
| if (!(pf->flags & I40E_FLAG_FCOE_ENABLED)) { |
| dev_err(&pf->pdev->dev, |
| "FCoE is not enabled for this device\n"); |
| return -EPERM; |
| } |
| |
| /* initialize the hardware for FCoE */ |
| ctxt->pf_num = hw->pf_id; |
| ctxt->vf_num = 0; |
| ctxt->uplink_seid = vsi->uplink_seid; |
| ctxt->connection_type = 0x1; |
| ctxt->flags = I40E_AQ_VSI_TYPE_PF; |
| |
| /* FCoE VSI would need the following sections */ |
| info->valid_sections |= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID | |
| I40E_AQ_VSI_PROP_QUEUE_OPT_VALID); |
| |
| /* FCoE VSI does not need these sections */ |
| info->valid_sections &= cpu_to_le16(~(I40E_AQ_VSI_PROP_SECURITY_VALID | |
| I40E_AQ_VSI_PROP_VLAN_VALID | |
| I40E_AQ_VSI_PROP_CAS_PV_VALID | |
| I40E_AQ_VSI_PROP_INGRESS_UP_VALID | |
| I40E_AQ_VSI_PROP_EGRESS_UP_VALID)); |
| |
| info->switch_id = cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB); |
| enabled_tc = i40e_get_fcoe_tc_map(pf); |
| i40e_vsi_setup_queue_map(vsi, ctxt, enabled_tc, true); |
| |
| /* set up queue option section: only enable FCoE */ |
| info->queueing_opt_flags = I40E_AQ_VSI_QUE_OPT_FCOE_ENA; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_enable - this is the implementation of ndo_fcoe_enable, |
| * indicating the upper FCoE protocol stack is ready to use FCoE |
| * offload features. |
| * |
| * @netdev: pointer to the netdev that FCoE is created on |
| * |
| * Returns 0 on success |
| * |
| * in RTNL |
| * |
| **/ |
| int i40e_fcoe_enable(struct net_device *netdev) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| |
| if (!(pf->flags & I40E_FLAG_FCOE_ENABLED)) { |
| netdev_err(netdev, "HW does not support FCoE.\n"); |
| return -ENODEV; |
| } |
| |
| if (vsi->type != I40E_VSI_FCOE) { |
| netdev_err(netdev, "interface does not support FCoE.\n"); |
| return -EBUSY; |
| } |
| |
| atomic_inc(&fcoe->refcnt); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_disable- disables FCoE for upper FCoE protocol stack. |
| * @dev: pointer to the netdev that FCoE is created on |
| * |
| * Returns 0 on success |
| * |
| **/ |
| int i40e_fcoe_disable(struct net_device *netdev) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| |
| if (!(pf->flags & I40E_FLAG_FCOE_ENABLED)) { |
| netdev_err(netdev, "device does not support FCoE\n"); |
| return -ENODEV; |
| } |
| if (vsi->type != I40E_VSI_FCOE) |
| return -EBUSY; |
| |
| if (!atomic_dec_and_test(&fcoe->refcnt)) |
| return -EINVAL; |
| |
| netdev_info(netdev, "FCoE disabled\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_dma_pool_free - free the per cpu pool for FCoE DDP |
| * @fcoe: the FCoE sw object |
| * @dev: the device that the pool is associated with |
| * @cpu: the cpu for this pool |
| * |
| **/ |
| static void i40e_fcoe_dma_pool_free(struct i40e_fcoe *fcoe, |
| struct device *dev, |
| unsigned int cpu) |
| { |
| struct i40e_fcoe_ddp_pool *ddp_pool; |
| |
| ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu); |
| if (!ddp_pool->pool) { |
| dev_warn(dev, "DDP pool already freed for cpu %d\n", cpu); |
| return; |
| } |
| dma_pool_destroy(ddp_pool->pool); |
| ddp_pool->pool = NULL; |
| } |
| |
| /** |
| * i40e_fcoe_dma_pool_create - per cpu pool for FCoE DDP |
| * @fcoe: the FCoE sw object |
| * @dev: the device that the pool is associated with |
| * @cpu: the cpu for this pool |
| * |
| * Returns 0 on successful or non zero on failure |
| * |
| **/ |
| static int i40e_fcoe_dma_pool_create(struct i40e_fcoe *fcoe, |
| struct device *dev, |
| unsigned int cpu) |
| { |
| struct i40e_fcoe_ddp_pool *ddp_pool; |
| struct dma_pool *pool; |
| char pool_name[32]; |
| |
| ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu); |
| if (ddp_pool && ddp_pool->pool) { |
| dev_warn(dev, "DDP pool already allocated for cpu %d\n", cpu); |
| return 0; |
| } |
| snprintf(pool_name, sizeof(pool_name), "i40e_fcoe_ddp_%d", cpu); |
| pool = dma_pool_create(pool_name, dev, I40E_FCOE_DDP_PTR_MAX, |
| I40E_FCOE_DDP_PTR_ALIGN, PAGE_SIZE); |
| if (!pool) { |
| dev_err(dev, "dma_pool_create %s failed\n", pool_name); |
| return -ENOMEM; |
| } |
| ddp_pool->pool = pool; |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_free_ddp_resources - release FCoE DDP resources |
| * @vsi: the vsi FCoE is associated with |
| * |
| **/ |
| void i40e_fcoe_free_ddp_resources(struct i40e_vsi *vsi) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| int cpu, i; |
| |
| /* do nothing if not FCoE VSI */ |
| if (vsi->type != I40E_VSI_FCOE) |
| return; |
| |
| /* do nothing if no DDP pools were allocated */ |
| if (!fcoe->ddp_pool) |
| return; |
| |
| for (i = 0; i < I40E_FCOE_DDP_MAX; i++) |
| i40e_fcoe_ddp_put(vsi->netdev, i); |
| |
| for_each_possible_cpu(cpu) |
| i40e_fcoe_dma_pool_free(fcoe, &pf->pdev->dev, cpu); |
| |
| free_percpu(fcoe->ddp_pool); |
| fcoe->ddp_pool = NULL; |
| |
| netdev_info(vsi->netdev, "VSI %d,%d FCoE DDP resources released\n", |
| vsi->id, vsi->seid); |
| } |
| |
| /** |
| * i40e_fcoe_setup_ddp_resources - allocate per cpu DDP resources |
| * @vsi: the VSI FCoE is associated with |
| * |
| * Returns 0 on successful or non zero on failure |
| * |
| **/ |
| int i40e_fcoe_setup_ddp_resources(struct i40e_vsi *vsi) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct device *dev = &pf->pdev->dev; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| unsigned int cpu; |
| int i; |
| |
| if (vsi->type != I40E_VSI_FCOE) |
| return -ENODEV; |
| |
| /* do nothing if no DDP pools were allocated */ |
| if (fcoe->ddp_pool) |
| return -EEXIST; |
| |
| /* allocate per CPU memory to track DDP pools */ |
| fcoe->ddp_pool = alloc_percpu(struct i40e_fcoe_ddp_pool); |
| if (!fcoe->ddp_pool) { |
| dev_err(&pf->pdev->dev, "failed to allocate percpu DDP\n"); |
| return -ENOMEM; |
| } |
| |
| /* allocate pci pool for each cpu */ |
| for_each_possible_cpu(cpu) { |
| if (!i40e_fcoe_dma_pool_create(fcoe, dev, cpu)) |
| continue; |
| |
| dev_err(dev, "failed to alloc DDP pool on cpu:%d\n", cpu); |
| i40e_fcoe_free_ddp_resources(vsi); |
| return -ENOMEM; |
| } |
| |
| /* initialize the sw context */ |
| for (i = 0; i < I40E_FCOE_DDP_MAX; i++) |
| i40e_fcoe_ddp_clear(&fcoe->ddp[i]); |
| |
| netdev_info(vsi->netdev, "VSI %d,%d FCoE DDP resources allocated\n", |
| vsi->id, vsi->seid); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_handle_status - check the Programming Status for FCoE |
| * @rx_ring: the Rx ring for this descriptor |
| * @rx_desc: the Rx descriptor for Programming Status, not a packet descriptor. |
| * |
| * Check if this is the Rx Programming Status descriptor write-back for FCoE. |
| * This is used to verify if the context/filter programming or invalidation |
| * requested by SW to the HW is successful or not and take actions accordingly. |
| **/ |
| void i40e_fcoe_handle_status(struct i40e_ring *rx_ring, |
| union i40e_rx_desc *rx_desc, u8 prog_id) |
| { |
| struct i40e_pf *pf = rx_ring->vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| struct i40e_fcoe_ddp *ddp; |
| u32 error; |
| u16 xid; |
| u64 qw; |
| |
| /* we only care for FCoE here */ |
| if (!i40e_fcoe_progid_is_fcoe(prog_id)) |
| return; |
| |
| xid = le32_to_cpu(rx_desc->wb.qword0.hi_dword.fcoe_param) & |
| (I40E_FCOE_DDP_MAX - 1); |
| |
| if (!i40e_fcoe_xid_is_valid(xid)) |
| return; |
| |
| ddp = &fcoe->ddp[xid]; |
| WARN_ON(xid != ddp->xid); |
| |
| qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len); |
| error = (qw & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >> |
| I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT; |
| |
| /* DDP context programming status: failure or success */ |
| if (prog_id == I40E_RX_PROG_STATUS_DESC_FCOE_CTXT_PROG_STATUS) { |
| if (I40E_RX_PROG_FCOE_ERROR_TBL_FULL(error)) { |
| dev_err(&pf->pdev->dev, "xid %x ddp->xid %x TABLE FULL\n", |
| xid, ddp->xid); |
| ddp->prerr |= I40E_RX_PROG_FCOE_ERROR_TBL_FULL_BIT; |
| } |
| if (I40E_RX_PROG_FCOE_ERROR_CONFLICT(error)) { |
| dev_err(&pf->pdev->dev, "xid %x ddp->xid %x CONFLICT\n", |
| xid, ddp->xid); |
| ddp->prerr |= I40E_RX_PROG_FCOE_ERROR_CONFLICT_BIT; |
| } |
| } |
| |
| /* DDP context invalidation status: failure or success */ |
| if (prog_id == I40E_RX_PROG_STATUS_DESC_FCOE_CTXT_INVL_STATUS) { |
| if (I40E_RX_PROG_FCOE_ERROR_INVLFAIL(error)) { |
| dev_err(&pf->pdev->dev, "xid %x ddp->xid %x INVALIDATION FAILURE\n", |
| xid, ddp->xid); |
| ddp->prerr |= I40E_RX_PROG_FCOE_ERROR_INVLFAIL_BIT; |
| } |
| /* clear the flag so we can retry invalidation */ |
| clear_bit(__I40E_FCOE_DDP_ABORTED, &ddp->flags); |
| } |
| |
| /* unmap DMA */ |
| i40e_fcoe_ddp_unmap(pf, ddp); |
| i40e_fcoe_ddp_clear(ddp); |
| } |
| |
| /** |
| * i40e_fcoe_handle_offload - check ddp status and mark it done |
| * @adapter: i40e adapter |
| * @rx_desc: advanced rx descriptor |
| * @skb: the skb holding the received data |
| * |
| * This checks ddp status. |
| * |
| * Returns : < 0 indicates an error or not a FCOE ddp, 0 indicates |
| * not passing the skb to ULD, > 0 indicates is the length of data |
| * being ddped. |
| * |
| **/ |
| int i40e_fcoe_handle_offload(struct i40e_ring *rx_ring, |
| union i40e_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct i40e_pf *pf = rx_ring->vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| struct fc_frame_header *fh = NULL; |
| struct i40e_fcoe_ddp *ddp = NULL; |
| u32 status, fltstat; |
| u32 error, fcerr; |
| int rc = -EINVAL; |
| u16 ptype; |
| u16 xid; |
| u64 qw; |
| |
| /* check this rxd is for programming status */ |
| qw = le64_to_cpu(rx_desc->wb.qword1.status_error_len); |
| /* packet descriptor, check packet type */ |
| ptype = (qw & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT; |
| if (!i40e_rx_is_fcoe(ptype)) |
| goto out_no_ddp; |
| |
| error = (qw & I40E_RXD_QW1_ERROR_MASK) >> I40E_RXD_QW1_ERROR_SHIFT; |
| fcerr = (error >> I40E_RX_DESC_ERROR_L3L4E_SHIFT) & |
| I40E_RX_DESC_FCOE_ERROR_MASK; |
| |
| /* check stateless offload error */ |
| if (unlikely(fcerr == I40E_RX_DESC_ERROR_L3L4E_PROT)) { |
| dev_err(&pf->pdev->dev, "Protocol Error\n"); |
| skb->ip_summed = CHECKSUM_NONE; |
| } else { |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } |
| |
| /* check hw status on ddp */ |
| status = (qw & I40E_RXD_QW1_STATUS_MASK) >> I40E_RXD_QW1_STATUS_SHIFT; |
| fltstat = (status >> I40E_RX_DESC_STATUS_FLTSTAT_SHIFT) & |
| I40E_RX_DESC_FLTSTAT_FCMASK; |
| |
| /* now we are ready to check DDP */ |
| fh = i40e_fcoe_fc_frame_header(skb); |
| xid = i40e_fcoe_fc_get_xid(fh); |
| if (!i40e_fcoe_xid_is_valid(xid)) |
| goto out_no_ddp; |
| |
| /* non DDP normal receive, return to the protocol stack */ |
| if (fltstat == I40E_RX_DESC_FLTSTAT_NOMTCH) |
| goto out_no_ddp; |
| |
| /* do we have a sw ddp context setup ? */ |
| ddp = &fcoe->ddp[xid]; |
| if (!ddp->sgl) |
| goto out_no_ddp; |
| |
| /* fetch xid from hw rxd wb, which should match up the sw ctxt */ |
| xid = le16_to_cpu(rx_desc->wb.qword0.lo_dword.mirr_fcoe.fcoe_ctx_id); |
| if (ddp->xid != xid) { |
| dev_err(&pf->pdev->dev, "xid 0x%x does not match ctx_xid 0x%x\n", |
| ddp->xid, xid); |
| goto out_put_ddp; |
| } |
| |
| /* the same exchange has already errored out */ |
| if (ddp->fcerr) { |
| dev_err(&pf->pdev->dev, "xid 0x%x fcerr 0x%x reported fcer 0x%x\n", |
| xid, ddp->fcerr, fcerr); |
| goto out_put_ddp; |
| } |
| |
| /* fcoe param is valid by now with correct DDPed length */ |
| ddp->len = le32_to_cpu(rx_desc->wb.qword0.hi_dword.fcoe_param); |
| ddp->fcerr = fcerr; |
| /* header posting only, useful only for target mode and debugging */ |
| if (fltstat == I40E_RX_DESC_FLTSTAT_DDP) { |
| /* For target mode, we get header of the last packet but it |
| * does not have the FCoE trailer field, i.e., CRC and EOF |
| * Ordered Set since they are offloaded by the HW, so fill |
| * it up correspondingly to allow the packet to pass through |
| * to the upper protocol stack. |
| */ |
| u32 f_ctl = ntoh24(fh->fh_f_ctl); |
| |
| if ((f_ctl & FC_FC_END_SEQ) && |
| (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA)) { |
| struct fcoe_crc_eof *crc = NULL; |
| |
| crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc)); |
| crc->fcoe_eof = FC_EOF_T; |
| } else { |
| /* otherwise, drop the header only frame */ |
| rc = 0; |
| goto out_no_ddp; |
| } |
| } |
| |
| out_put_ddp: |
| /* either we got RSP or we have an error, unmap DMA in both cases */ |
| i40e_fcoe_ddp_unmap(pf, ddp); |
| if (ddp->len && !ddp->fcerr) { |
| int pkts; |
| |
| rc = ddp->len; |
| i40e_fcoe_ddp_clear(ddp); |
| ddp->len = rc; |
| pkts = DIV_ROUND_UP(rc, 2048); |
| rx_ring->stats.bytes += rc; |
| rx_ring->stats.packets += pkts; |
| rx_ring->q_vector->rx.total_bytes += rc; |
| rx_ring->q_vector->rx.total_packets += pkts; |
| set_bit(__I40E_FCOE_DDP_DONE, &ddp->flags); |
| } |
| |
| out_no_ddp: |
| return rc; |
| } |
| |
| /** |
| * i40e_fcoe_ddp_setup - called to set up ddp context |
| * @netdev: the corresponding net_device |
| * @xid: the exchange id requesting ddp |
| * @sgl: the scatter-gather list for this request |
| * @sgc: the number of scatter-gather items |
| * @target_mode: indicates this is a DDP request for target |
| * |
| * Returns : 1 for success and 0 for no DDP on this I/O |
| **/ |
| static int i40e_fcoe_ddp_setup(struct net_device *netdev, u16 xid, |
| struct scatterlist *sgl, unsigned int sgc, |
| int target_mode) |
| { |
| static const unsigned int bufflen = I40E_FCOE_DDP_BUF_MIN; |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_fcoe_ddp_pool *ddp_pool; |
| struct i40e_pf *pf = np->vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| unsigned int i, j, dmacount; |
| struct i40e_fcoe_ddp *ddp; |
| unsigned int firstoff = 0; |
| unsigned int thisoff = 0; |
| unsigned int thislen = 0; |
| struct scatterlist *sg; |
| dma_addr_t addr = 0; |
| unsigned int len; |
| |
| if (xid >= I40E_FCOE_DDP_MAX) { |
| dev_warn(&pf->pdev->dev, "xid=0x%x out-of-range\n", xid); |
| return 0; |
| } |
| |
| /* no DDP if we are already down or resetting */ |
| if (test_bit(__I40E_DOWN, &pf->state) || |
| test_bit(__I40E_NEEDS_RESTART, &pf->state)) { |
| dev_info(&pf->pdev->dev, "xid=0x%x device in reset/down\n", |
| xid); |
| return 0; |
| } |
| |
| ddp = &fcoe->ddp[xid]; |
| if (ddp->sgl) { |
| dev_info(&pf->pdev->dev, "xid 0x%x w/ non-null sgl=%p nents=%d\n", |
| xid, ddp->sgl, ddp->sgc); |
| return 0; |
| } |
| i40e_fcoe_ddp_clear(ddp); |
| |
| if (!fcoe->ddp_pool) { |
| dev_info(&pf->pdev->dev, "No DDP pool, xid 0x%x\n", xid); |
| return 0; |
| } |
| |
| ddp_pool = per_cpu_ptr(fcoe->ddp_pool, get_cpu()); |
| if (!ddp_pool->pool) { |
| dev_info(&pf->pdev->dev, "No percpu ddp pool, xid 0x%x\n", xid); |
| goto out_noddp; |
| } |
| |
| /* setup dma from scsi command sgl */ |
| dmacount = dma_map_sg(&pf->pdev->dev, sgl, sgc, DMA_FROM_DEVICE); |
| if (dmacount == 0) { |
| dev_info(&pf->pdev->dev, "dma_map_sg for sgl %p, sgc %d failed\n", |
| sgl, sgc); |
| goto out_noddp_unmap; |
| } |
| |
| /* alloc the udl from our ddp pool */ |
| ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp); |
| if (!ddp->udl) { |
| dev_info(&pf->pdev->dev, |
| "Failed allocated ddp context, xid 0x%x\n", xid); |
| goto out_noddp_unmap; |
| } |
| |
| j = 0; |
| ddp->len = 0; |
| for_each_sg(sgl, sg, dmacount, i) { |
| addr = sg_dma_address(sg); |
| len = sg_dma_len(sg); |
| ddp->len += len; |
| while (len) { |
| /* max number of buffers allowed in one DDP context */ |
| if (j >= I40E_FCOE_DDP_BUFFCNT_MAX) { |
| dev_info(&pf->pdev->dev, |
| "xid=%x:%d,%d,%d:addr=%llx not enough descriptors\n", |
| xid, i, j, dmacount, (u64)addr); |
| goto out_noddp_free; |
| } |
| |
| /* get the offset of length of current buffer */ |
| thisoff = addr & ((dma_addr_t)bufflen - 1); |
| thislen = min_t(unsigned int, (bufflen - thisoff), len); |
| /* all but the 1st buffer (j == 0) |
| * must be aligned on bufflen |
| */ |
| if ((j != 0) && (thisoff)) |
| goto out_noddp_free; |
| |
| /* all but the last buffer |
| * ((i == (dmacount - 1)) && (thislen == len)) |
| * must end at bufflen |
| */ |
| if (((i != (dmacount - 1)) || (thislen != len)) && |
| ((thislen + thisoff) != bufflen)) |
| goto out_noddp_free; |
| |
| ddp->udl[j] = (u64)(addr - thisoff); |
| /* only the first buffer may have none-zero offset */ |
| if (j == 0) |
| firstoff = thisoff; |
| len -= thislen; |
| addr += thislen; |
| j++; |
| } |
| } |
| /* only the last buffer may have non-full bufflen */ |
| ddp->lastsize = thisoff + thislen; |
| ddp->firstoff = firstoff; |
| ddp->list_len = j; |
| ddp->pool = ddp_pool->pool; |
| ddp->sgl = sgl; |
| ddp->sgc = sgc; |
| ddp->xid = xid; |
| if (target_mode) |
| set_bit(__I40E_FCOE_DDP_TARGET, &ddp->flags); |
| set_bit(__I40E_FCOE_DDP_INITALIZED, &ddp->flags); |
| |
| put_cpu(); |
| return 1; /* Success */ |
| |
| out_noddp_free: |
| dma_pool_free(ddp->pool, ddp->udl, ddp->udp); |
| i40e_fcoe_ddp_clear(ddp); |
| |
| out_noddp_unmap: |
| dma_unmap_sg(&pf->pdev->dev, sgl, sgc, DMA_FROM_DEVICE); |
| out_noddp: |
| put_cpu(); |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_ddp_get - called to set up ddp context in initiator mode |
| * @netdev: the corresponding net_device |
| * @xid: the exchange id requesting ddp |
| * @sgl: the scatter-gather list for this request |
| * @sgc: the number of scatter-gather items |
| * |
| * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup |
| * and is expected to be called from ULD, e.g., FCP layer of libfc |
| * to set up ddp for the corresponding xid of the given sglist for |
| * the corresponding I/O. |
| * |
| * Returns : 1 for success and 0 for no ddp |
| **/ |
| static int i40e_fcoe_ddp_get(struct net_device *netdev, u16 xid, |
| struct scatterlist *sgl, unsigned int sgc) |
| { |
| return i40e_fcoe_ddp_setup(netdev, xid, sgl, sgc, 0); |
| } |
| |
| /** |
| * i40e_fcoe_ddp_target - called to set up ddp context in target mode |
| * @netdev: the corresponding net_device |
| * @xid: the exchange id requesting ddp |
| * @sgl: the scatter-gather list for this request |
| * @sgc: the number of scatter-gather items |
| * |
| * This is the implementation of net_device_ops.ndo_fcoe_ddp_target |
| * and is expected to be called from ULD, e.g., FCP layer of libfc |
| * to set up ddp for the corresponding xid of the given sglist for |
| * the corresponding I/O. The DDP in target mode is a write I/O request |
| * from the initiator. |
| * |
| * Returns : 1 for success and 0 for no ddp |
| **/ |
| static int i40e_fcoe_ddp_target(struct net_device *netdev, u16 xid, |
| struct scatterlist *sgl, unsigned int sgc) |
| { |
| return i40e_fcoe_ddp_setup(netdev, xid, sgl, sgc, 1); |
| } |
| |
| /** |
| * i40e_fcoe_program_ddp - programs the HW DDP related descriptors |
| * @tx_ring: transmit ring for this packet |
| * @skb: the packet to be sent out |
| * @sof: the SOF to indicate class of service |
| * |
| * Determine if it is READ/WRITE command, and finds out if there is |
| * a matching SW DDP context for this command. DDP is applicable |
| * only in case of READ if initiator or WRITE in case of |
| * responder (via checking XFER_RDY). |
| * |
| * Note: caller checks sof and ddp sw context |
| * |
| * Returns : none |
| * |
| **/ |
| static void i40e_fcoe_program_ddp(struct i40e_ring *tx_ring, |
| struct sk_buff *skb, |
| struct i40e_fcoe_ddp *ddp, u8 sof) |
| { |
| struct i40e_fcoe_filter_context_desc *filter_desc = NULL; |
| struct i40e_fcoe_queue_context_desc *queue_desc = NULL; |
| struct i40e_fcoe_ddp_context_desc *ddp_desc = NULL; |
| struct i40e_pf *pf = tx_ring->vsi->back; |
| u16 i = tx_ring->next_to_use; |
| struct fc_frame_header *fh; |
| u64 flags_rsvd_lanq = 0; |
| bool target_mode; |
| |
| /* check if abort is still pending */ |
| if (test_bit(__I40E_FCOE_DDP_ABORTED, &ddp->flags)) { |
| dev_warn(&pf->pdev->dev, |
| "DDP abort is still pending xid:%hx and ddp->flags:%lx:\n", |
| ddp->xid, ddp->flags); |
| return; |
| } |
| |
| /* set the flag to indicate this is programmed */ |
| if (test_and_set_bit(__I40E_FCOE_DDP_PROGRAMMED, &ddp->flags)) { |
| dev_warn(&pf->pdev->dev, |
| "DDP is already programmed for xid:%hx and ddp->flags:%lx:\n", |
| ddp->xid, ddp->flags); |
| return; |
| } |
| |
| /* Prepare the DDP context descriptor */ |
| ddp_desc = I40E_DDP_CONTEXT_DESC(tx_ring, i); |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| |
| ddp_desc->type_cmd_foff_lsize = |
| cpu_to_le64(I40E_TX_DESC_DTYPE_DDP_CTX | |
| ((u64)I40E_FCOE_DDP_CTX_DESC_BSIZE_4K << |
| I40E_FCOE_DDP_CTX_QW1_CMD_SHIFT) | |
| ((u64)ddp->firstoff << |
| I40E_FCOE_DDP_CTX_QW1_FOFF_SHIFT) | |
| ((u64)ddp->lastsize << |
| I40E_FCOE_DDP_CTX_QW1_LSIZE_SHIFT)); |
| ddp_desc->rsvd = cpu_to_le64(0); |
| |
| /* target mode needs last packet in the sequence */ |
| target_mode = test_bit(__I40E_FCOE_DDP_TARGET, &ddp->flags); |
| if (target_mode) |
| ddp_desc->type_cmd_foff_lsize |= |
| cpu_to_le64(I40E_FCOE_DDP_CTX_DESC_LASTSEQH); |
| |
| /* Prepare queue_context descriptor */ |
| queue_desc = I40E_QUEUE_CONTEXT_DESC(tx_ring, i++); |
| if (i == tx_ring->count) |
| i = 0; |
| queue_desc->dmaindx_fbase = cpu_to_le64(ddp->xid | ((u64)ddp->udp)); |
| queue_desc->flen_tph = cpu_to_le64(ddp->list_len | |
| ((u64)(I40E_FCOE_QUEUE_CTX_DESC_TPHRDESC | |
| I40E_FCOE_QUEUE_CTX_DESC_TPHDATA) << |
| I40E_FCOE_QUEUE_CTX_QW1_TPH_SHIFT)); |
| |
| /* Prepare filter_context_desc */ |
| filter_desc = I40E_FILTER_CONTEXT_DESC(tx_ring, i); |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| |
| fh = (struct fc_frame_header *)skb_transport_header(skb); |
| filter_desc->param = cpu_to_le32(ntohl(fh->fh_parm_offset)); |
| filter_desc->seqn = cpu_to_le16(ntohs(fh->fh_seq_cnt)); |
| filter_desc->rsvd_dmaindx = cpu_to_le16(ddp->xid << |
| I40E_FCOE_FILTER_CTX_QW0_DMAINDX_SHIFT); |
| |
| flags_rsvd_lanq = I40E_FCOE_FILTER_CTX_DESC_CTYP_DDP; |
| flags_rsvd_lanq |= (u64)(target_mode ? |
| I40E_FCOE_FILTER_CTX_DESC_ENODE_RSP : |
| I40E_FCOE_FILTER_CTX_DESC_ENODE_INIT); |
| |
| flags_rsvd_lanq |= (u64)((sof == FC_SOF_I2 || sof == FC_SOF_N2) ? |
| I40E_FCOE_FILTER_CTX_DESC_FC_CLASS2 : |
| I40E_FCOE_FILTER_CTX_DESC_FC_CLASS3); |
| |
| flags_rsvd_lanq |= ((u64)skb->queue_mapping << |
| I40E_FCOE_FILTER_CTX_QW1_LANQINDX_SHIFT); |
| filter_desc->flags_rsvd_lanq = cpu_to_le64(flags_rsvd_lanq); |
| |
| /* By this time, all offload related descriptors has been programmed */ |
| tx_ring->next_to_use = i; |
| } |
| |
| /** |
| * i40e_fcoe_invalidate_ddp - invalidates DDP in case of abort |
| * @tx_ring: transmit ring for this packet |
| * @skb: the packet associated w/ this DDP invalidation, i.e., ABTS |
| * @ddp: the SW DDP context for this DDP |
| * |
| * Programs the Tx context descriptor to do DDP invalidation. |
| **/ |
| static void i40e_fcoe_invalidate_ddp(struct i40e_ring *tx_ring, |
| struct sk_buff *skb, |
| struct i40e_fcoe_ddp *ddp) |
| { |
| struct i40e_tx_context_desc *context_desc; |
| int i; |
| |
| if (test_and_set_bit(__I40E_FCOE_DDP_ABORTED, &ddp->flags)) |
| return; |
| |
| i = tx_ring->next_to_use; |
| context_desc = I40E_TX_CTXTDESC(tx_ring, i); |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| |
| context_desc->tunneling_params = cpu_to_le32(0); |
| context_desc->l2tag2 = cpu_to_le16(0); |
| context_desc->rsvd = cpu_to_le16(0); |
| context_desc->type_cmd_tso_mss = cpu_to_le64( |
| I40E_TX_DESC_DTYPE_FCOE_CTX | |
| (I40E_FCOE_TX_CTX_DESC_OPCODE_DDP_CTX_INVL << |
| I40E_TXD_CTX_QW1_CMD_SHIFT) | |
| (I40E_FCOE_TX_CTX_DESC_OPCODE_SINGLE_SEND << |
| I40E_TXD_CTX_QW1_CMD_SHIFT)); |
| tx_ring->next_to_use = i; |
| } |
| |
| /** |
| * i40e_fcoe_handle_ddp - check we should setup or invalidate DDP |
| * @tx_ring: transmit ring for this packet |
| * @skb: the packet to be sent out |
| * @sof: the SOF to indicate class of service |
| * |
| * Determine if it is ABTS/READ/XFER_RDY, and finds out if there is |
| * a matching SW DDP context for this command. DDP is applicable |
| * only in case of READ if initiator or WRITE in case of |
| * responder (via checking XFER_RDY). In case this is an ABTS, send |
| * just invalidate the context. |
| **/ |
| static void i40e_fcoe_handle_ddp(struct i40e_ring *tx_ring, |
| struct sk_buff *skb, u8 sof) |
| { |
| struct i40e_pf *pf = tx_ring->vsi->back; |
| struct i40e_fcoe *fcoe = &pf->fcoe; |
| struct fc_frame_header *fh; |
| struct i40e_fcoe_ddp *ddp; |
| u32 f_ctl; |
| u8 r_ctl; |
| u16 xid; |
| |
| fh = (struct fc_frame_header *)skb_transport_header(skb); |
| f_ctl = ntoh24(fh->fh_f_ctl); |
| r_ctl = fh->fh_r_ctl; |
| ddp = NULL; |
| |
| if ((r_ctl == FC_RCTL_DD_DATA_DESC) && (f_ctl & FC_FC_EX_CTX)) { |
| /* exchange responder? if so, XFER_RDY for write */ |
| xid = ntohs(fh->fh_rx_id); |
| if (i40e_fcoe_xid_is_valid(xid)) { |
| ddp = &fcoe->ddp[xid]; |
| if ((ddp->xid == xid) && |
| (test_bit(__I40E_FCOE_DDP_TARGET, &ddp->flags))) |
| i40e_fcoe_program_ddp(tx_ring, skb, ddp, sof); |
| } |
| } else if (r_ctl == FC_RCTL_DD_UNSOL_CMD) { |
| /* exchange originator, check READ cmd */ |
| xid = ntohs(fh->fh_ox_id); |
| if (i40e_fcoe_xid_is_valid(xid)) { |
| ddp = &fcoe->ddp[xid]; |
| if ((ddp->xid == xid) && |
| (!test_bit(__I40E_FCOE_DDP_TARGET, &ddp->flags))) |
| i40e_fcoe_program_ddp(tx_ring, skb, ddp, sof); |
| } |
| } else if (r_ctl == FC_RCTL_BA_ABTS) { |
| /* exchange originator, check ABTS */ |
| xid = ntohs(fh->fh_ox_id); |
| if (i40e_fcoe_xid_is_valid(xid)) { |
| ddp = &fcoe->ddp[xid]; |
| if ((ddp->xid == xid) && |
| (!test_bit(__I40E_FCOE_DDP_TARGET, &ddp->flags))) |
| i40e_fcoe_invalidate_ddp(tx_ring, skb, ddp); |
| } |
| } |
| } |
| |
| /** |
| * i40e_fcoe_tso - set up FCoE TSO |
| * @tx_ring: ring to send buffer on |
| * @skb: send buffer |
| * @tx_flags: collected send information |
| * @hdr_len: the tso header length |
| * @sof: the SOF to indicate class of service |
| * |
| * Note must already have sof checked to be either class 2 or class 3 before |
| * calling this function. |
| * |
| * Returns 1 to indicate sequence segmentation offload is properly setup |
| * or returns 0 to indicate no tso is needed, otherwise returns error |
| * code to drop the frame. |
| **/ |
| static int i40e_fcoe_tso(struct i40e_ring *tx_ring, |
| struct sk_buff *skb, |
| u32 tx_flags, u8 *hdr_len, u8 sof) |
| { |
| struct i40e_tx_context_desc *context_desc; |
| u32 cd_type, cd_cmd, cd_tso_len, cd_mss; |
| struct fc_frame_header *fh; |
| u64 cd_type_cmd_tso_mss; |
| |
| /* must match gso type as FCoE */ |
| if (!skb_is_gso(skb)) |
| return 0; |
| |
| /* is it the expected gso type for FCoE ?*/ |
| if (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE) { |
| netdev_err(skb->dev, |
| "wrong gso type %d:expecting SKB_GSO_FCOE\n", |
| skb_shinfo(skb)->gso_type); |
| return -EINVAL; |
| } |
| |
| /* header and trailer are inserted by hw */ |
| *hdr_len = skb_transport_offset(skb) + sizeof(struct fc_frame_header) + |
| sizeof(struct fcoe_crc_eof); |
| |
| /* check sof to decide a class 2 or 3 TSO */ |
| if (likely(i40e_fcoe_sof_is_class3(sof))) |
| cd_cmd = I40E_FCOE_TX_CTX_DESC_OPCODE_TSO_FC_CLASS3; |
| else |
| cd_cmd = I40E_FCOE_TX_CTX_DESC_OPCODE_TSO_FC_CLASS2; |
| |
| /* param field valid? */ |
| fh = (struct fc_frame_header *)skb_transport_header(skb); |
| if (fh->fh_f_ctl[2] & FC_FC_REL_OFF) |
| cd_cmd |= I40E_FCOE_TX_CTX_DESC_RELOFF; |
| |
| /* fill the field values */ |
| cd_type = I40E_TX_DESC_DTYPE_FCOE_CTX; |
| cd_tso_len = skb->len - *hdr_len; |
| cd_mss = skb_shinfo(skb)->gso_size; |
| cd_type_cmd_tso_mss = |
| ((u64)cd_type << I40E_TXD_CTX_QW1_DTYPE_SHIFT) | |
| ((u64)cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) | |
| ((u64)cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) | |
| ((u64)cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT); |
| |
| /* grab the next descriptor */ |
| context_desc = I40E_TX_CTXTDESC(tx_ring, tx_ring->next_to_use); |
| tx_ring->next_to_use++; |
| if (tx_ring->next_to_use == tx_ring->count) |
| tx_ring->next_to_use = 0; |
| |
| context_desc->tunneling_params = 0; |
| context_desc->l2tag2 = cpu_to_le16((tx_flags & I40E_TX_FLAGS_VLAN_MASK) |
| >> I40E_TX_FLAGS_VLAN_SHIFT); |
| context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss); |
| |
| return 1; |
| } |
| |
| /** |
| * i40e_fcoe_tx_map - build the tx descriptor |
| * @tx_ring: ring to send buffer on |
| * @skb: send buffer |
| * @first: first buffer info buffer to use |
| * @tx_flags: collected send information |
| * @hdr_len: ptr to the size of the packet header |
| * @eof: the frame eof value |
| * |
| * Note, for FCoE, sof and eof are already checked |
| **/ |
| static void i40e_fcoe_tx_map(struct i40e_ring *tx_ring, |
| struct sk_buff *skb, |
| struct i40e_tx_buffer *first, |
| u32 tx_flags, u8 hdr_len, u8 eof) |
| { |
| u32 td_offset = 0; |
| u32 td_cmd = 0; |
| u32 maclen; |
| |
| /* insert CRC */ |
| td_cmd = I40E_TX_DESC_CMD_ICRC; |
| |
| /* setup MACLEN */ |
| maclen = skb_network_offset(skb); |
| if (tx_flags & I40E_TX_FLAGS_SW_VLAN) |
| maclen += sizeof(struct vlan_hdr); |
| |
| if (skb->protocol == htons(ETH_P_FCOE)) { |
| /* for FCoE, maclen should exclude ether type */ |
| maclen -= 2; |
| /* setup type as FCoE and EOF insertion */ |
| td_cmd |= (I40E_TX_DESC_CMD_FCOET | i40e_fcoe_ctxt_eof(eof)); |
| /* setup FCoELEN and FCLEN */ |
| td_offset |= ((((sizeof(struct fcoe_hdr) + 2) >> 2) << |
| I40E_TX_DESC_LENGTH_IPLEN_SHIFT) | |
| ((sizeof(struct fc_frame_header) >> 2) << |
| I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT)); |
| /* trim to exclude trailer */ |
| pskb_trim(skb, skb->len - sizeof(struct fcoe_crc_eof)); |
| } |
| |
| /* MACLEN is ether header length in words not bytes */ |
| td_offset |= (maclen >> 1) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT; |
| |
| return i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len, |
| td_cmd, td_offset); |
| } |
| |
| /** |
| * i40e_fcoe_set_skb_header - adjust skb header point for FIP/FCoE/FC |
| * @skb: the skb to be adjusted |
| * |
| * Returns true if this skb is a FCoE/FIP or VLAN carried FCoE/FIP and then |
| * adjusts the skb header pointers correspondingly. Otherwise, returns false. |
| **/ |
| static inline int i40e_fcoe_set_skb_header(struct sk_buff *skb) |
| { |
| __be16 protocol = skb->protocol; |
| |
| skb_reset_mac_header(skb); |
| skb->mac_len = sizeof(struct ethhdr); |
| if (protocol == htons(ETH_P_8021Q)) { |
| struct vlan_ethhdr *veth = (struct vlan_ethhdr *)eth_hdr(skb); |
| |
| protocol = veth->h_vlan_encapsulated_proto; |
| skb->mac_len += sizeof(struct vlan_hdr); |
| } |
| |
| /* FCoE or FIP only */ |
| if ((protocol != htons(ETH_P_FIP)) && |
| (protocol != htons(ETH_P_FCOE))) |
| return -EINVAL; |
| |
| /* set header to L2 of FCoE/FIP */ |
| skb_set_network_header(skb, skb->mac_len); |
| if (protocol == htons(ETH_P_FIP)) |
| return 0; |
| |
| /* set header to L3 of FC */ |
| skb_set_transport_header(skb, skb->mac_len + sizeof(struct fcoe_hdr)); |
| return 0; |
| } |
| |
| /** |
| * i40e_fcoe_xmit_frame - transmit buffer |
| * @skb: send buffer |
| * @netdev: the fcoe netdev |
| * |
| * Returns 0 if sent, else an error code |
| **/ |
| static netdev_tx_t i40e_fcoe_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(skb->dev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping]; |
| struct i40e_tx_buffer *first; |
| u32 tx_flags = 0; |
| u8 hdr_len = 0; |
| u8 sof = 0; |
| u8 eof = 0; |
| int fso; |
| |
| if (i40e_fcoe_set_skb_header(skb)) |
| goto out_drop; |
| |
| if (!i40e_xmit_descriptor_count(skb, tx_ring)) |
| return NETDEV_TX_BUSY; |
| |
| /* prepare the xmit flags */ |
| if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags)) |
| goto out_drop; |
| |
| /* record the location of the first descriptor for this packet */ |
| first = &tx_ring->tx_bi[tx_ring->next_to_use]; |
| |
| /* FIP is a regular L2 traffic w/o offload */ |
| if (skb->protocol == htons(ETH_P_FIP)) |
| goto out_send; |
| |
| /* check sof and eof, only supports FC Class 2 or 3 */ |
| if (i40e_fcoe_fc_sof(skb, &sof) || i40e_fcoe_fc_eof(skb, &eof)) { |
| netdev_err(netdev, "SOF/EOF error:%02x - %02x\n", sof, eof); |
| goto out_drop; |
| } |
| |
| /* always do FCCRC for FCoE */ |
| tx_flags |= I40E_TX_FLAGS_FCCRC; |
| |
| /* check we should do sequence offload */ |
| fso = i40e_fcoe_tso(tx_ring, skb, tx_flags, &hdr_len, sof); |
| if (fso < 0) |
| goto out_drop; |
| else if (fso) |
| tx_flags |= I40E_TX_FLAGS_FSO; |
| else |
| i40e_fcoe_handle_ddp(tx_ring, skb, sof); |
| |
| out_send: |
| /* send out the packet */ |
| i40e_fcoe_tx_map(tx_ring, skb, first, tx_flags, hdr_len, eof); |
| |
| i40e_maybe_stop_tx(tx_ring, DESC_NEEDED); |
| return NETDEV_TX_OK; |
| |
| out_drop: |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /** |
| * i40e_fcoe_change_mtu - NDO callback to change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns error as operation not permitted |
| * |
| **/ |
| static int i40e_fcoe_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| netdev_warn(netdev, "MTU change is not supported on FCoE interfaces\n"); |
| return -EPERM; |
| } |
| |
| /** |
| * i40e_fcoe_set_features - set the netdev feature flags |
| * @netdev: ptr to the netdev being adjusted |
| * @features: the feature set that the stack is suggesting |
| * |
| **/ |
| static int i40e_fcoe_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) |
| i40e_vlan_stripping_enable(vsi); |
| else |
| i40e_vlan_stripping_disable(vsi); |
| |
| return 0; |
| } |
| |
| |
| static const struct net_device_ops i40e_fcoe_netdev_ops = { |
| .ndo_open = i40e_open, |
| .ndo_stop = i40e_close, |
| .ndo_get_stats64 = i40e_get_netdev_stats_struct, |
| .ndo_set_rx_mode = i40e_set_rx_mode, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = i40e_set_mac, |
| .ndo_change_mtu = i40e_fcoe_change_mtu, |
| .ndo_do_ioctl = i40e_ioctl, |
| .ndo_tx_timeout = i40e_tx_timeout, |
| .ndo_vlan_rx_add_vid = i40e_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = i40e_vlan_rx_kill_vid, |
| .ndo_setup_tc = i40e_setup_tc, |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = i40e_netpoll, |
| #endif |
| .ndo_start_xmit = i40e_fcoe_xmit_frame, |
| .ndo_fcoe_enable = i40e_fcoe_enable, |
| .ndo_fcoe_disable = i40e_fcoe_disable, |
| .ndo_fcoe_ddp_setup = i40e_fcoe_ddp_get, |
| .ndo_fcoe_ddp_done = i40e_fcoe_ddp_put, |
| .ndo_fcoe_ddp_target = i40e_fcoe_ddp_target, |
| .ndo_set_features = i40e_fcoe_set_features, |
| }; |
| |
| /** |
| * i40e_fcoe_config_netdev - prepares the VSI context for creating a FCoE VSI |
| * @vsi: pointer to the associated VSI struct |
| * @ctxt: pointer to the associated VSI context to be passed to HW |
| * |
| * Returns 0 on success or < 0 on error |
| **/ |
| void i40e_fcoe_config_netdev(struct net_device *netdev, struct i40e_vsi *vsi) |
| { |
| struct i40e_hw *hw = &vsi->back->hw; |
| struct i40e_pf *pf = vsi->back; |
| |
| if (vsi->type != I40E_VSI_FCOE) |
| return; |
| |
| netdev->features = (NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_HW_VLAN_CTAG_FILTER); |
| |
| netdev->vlan_features = netdev->features; |
| netdev->vlan_features &= ~(NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_HW_VLAN_CTAG_FILTER); |
| netdev->fcoe_ddp_xid = I40E_FCOE_DDP_MAX - 1; |
| netdev->features |= NETIF_F_ALL_FCOE; |
| netdev->vlan_features |= NETIF_F_ALL_FCOE; |
| netdev->hw_features |= netdev->features; |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| netdev->priv_flags |= IFF_SUPP_NOFCS; |
| |
| strlcpy(netdev->name, "fcoe%d", IFNAMSIZ-1); |
| netdev->mtu = FCOE_MTU; |
| SET_NETDEV_DEV(netdev, &pf->pdev->dev); |
| /* set different dev_port value 1 for FCoE netdev than the default |
| * zero dev_port value for PF netdev, this helps biosdevname user |
| * tool to differentiate them correctly while both attached to the |
| * same PCI function. |
| */ |
| netdev->dev_port = 1; |
| i40e_add_filter(vsi, hw->mac.san_addr, 0, false, false); |
| i40e_add_filter(vsi, (u8[6]) FC_FCOE_FLOGI_MAC, 0, false, false); |
| i40e_add_filter(vsi, FIP_ALL_FCOE_MACS, 0, false, false); |
| i40e_add_filter(vsi, FIP_ALL_ENODE_MACS, 0, false, false); |
| |
| /* use san mac */ |
| ether_addr_copy(netdev->dev_addr, hw->mac.san_addr); |
| ether_addr_copy(netdev->perm_addr, hw->mac.san_addr); |
| /* fcoe netdev ops */ |
| netdev->netdev_ops = &i40e_fcoe_netdev_ops; |
| } |
| |
| /** |
| * i40e_fcoe_vsi_setup - allocate and set up FCoE VSI |
| * @pf: the pf that VSI is associated with |
| * |
| **/ |
| void i40e_fcoe_vsi_setup(struct i40e_pf *pf) |
| { |
| struct i40e_vsi *vsi; |
| u16 seid; |
| int i; |
| |
| if (!(pf->flags & I40E_FLAG_FCOE_ENABLED)) |
| return; |
| |
| BUG_ON(!pf->vsi[pf->lan_vsi]); |
| |
| for (i = 0; i < pf->num_alloc_vsi; i++) { |
| vsi = pf->vsi[i]; |
| if (vsi && vsi->type == I40E_VSI_FCOE) { |
| dev_warn(&pf->pdev->dev, |
| "FCoE VSI already created\n"); |
| return; |
| } |
| } |
| |
| seid = pf->vsi[pf->lan_vsi]->seid; |
| vsi = i40e_vsi_setup(pf, I40E_VSI_FCOE, seid, 0); |
| if (vsi) { |
| dev_dbg(&pf->pdev->dev, |
| "Successfully created FCoE VSI seid %d id %d uplink_seid %d pf seid %d\n", |
| vsi->seid, vsi->id, vsi->uplink_seid, seid); |
| } else { |
| dev_info(&pf->pdev->dev, "Failed to create FCoE VSI\n"); |
| } |
| } |