| /* $Id: elsa.c,v 2.32.2.4 2004/01/24 20:47:21 keil Exp $ |
| * |
| * low level stuff for Elsa isdn cards |
| * |
| * Author Karsten Keil |
| * Copyright by Karsten Keil <keil@isdn4linux.de> |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| * For changes and modifications please read |
| * Documentation/isdn/HiSax.cert |
| * |
| * Thanks to Elsa GmbH for documents and information |
| * |
| * Klaus Lichtenwalder (Klaus.Lichtenwalder@WebForum.DE) |
| * for ELSA PCMCIA support |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include "hisax.h" |
| #include "arcofi.h" |
| #include "isac.h" |
| #include "ipac.h" |
| #include "hscx.h" |
| #include "isdnl1.h" |
| #include <linux/pci.h> |
| #include <linux/isapnp.h> |
| #include <linux/serial.h> |
| #include <linux/serial_reg.h> |
| |
| static const char *Elsa_revision = "$Revision: 2.32.2.4 $"; |
| static const char *Elsa_Types[] = |
| {"None", "PC", "PCC-8", "PCC-16", "PCF", "PCF-Pro", |
| "PCMCIA", "QS 1000", "QS 3000", "Microlink PCI", "QS 3000 PCI", |
| "PCMCIA-IPAC" }; |
| |
| static const char *ITACVer[] = |
| {"?0?", "?1?", "?2?", "?3?", "?4?", "V2.2", |
| "B1", "A1"}; |
| |
| #define byteout(addr,val) outb(val,addr) |
| #define bytein(addr) inb(addr) |
| |
| #define ELSA_ISAC 0 |
| #define ELSA_ISAC_PCM 1 |
| #define ELSA_ITAC 1 |
| #define ELSA_HSCX 2 |
| #define ELSA_ALE 3 |
| #define ELSA_ALE_PCM 4 |
| #define ELSA_CONTROL 4 |
| #define ELSA_CONFIG 5 |
| #define ELSA_START_TIMER 6 |
| #define ELSA_TRIG_IRQ 7 |
| |
| #define ELSA_PC 1 |
| #define ELSA_PCC8 2 |
| #define ELSA_PCC16 3 |
| #define ELSA_PCF 4 |
| #define ELSA_PCFPRO 5 |
| #define ELSA_PCMCIA 6 |
| #define ELSA_QS1000 7 |
| #define ELSA_QS3000 8 |
| #define ELSA_QS1000PCI 9 |
| #define ELSA_QS3000PCI 10 |
| #define ELSA_PCMCIA_IPAC 11 |
| |
| /* PCI stuff */ |
| #define ELSA_PCI_IRQ_MASK 0x04 |
| |
| /* ITAC Registeradressen (only Microlink PC) */ |
| #define ITAC_SYS 0x34 |
| #define ITAC_ISEN 0x48 |
| #define ITAC_RFIE 0x4A |
| #define ITAC_XFIE 0x4C |
| #define ITAC_SCIE 0x4E |
| #define ITAC_STIE 0x46 |
| |
| /*** *** |
| *** Makros als Befehle fuer die Kartenregister *** |
| *** (mehrere Befehle werden durch Bit-Oderung kombiniert) *** |
| *** ***/ |
| |
| /* Config-Register (Read) */ |
| #define ELIRQF_TIMER_RUN 0x02 /* Bit 1 des Config-Reg */ |
| #define ELIRQF_TIMER_RUN_PCC8 0x01 /* Bit 0 des Config-Reg bei PCC */ |
| #define ELSA_IRQ_IDX 0x38 /* Bit 3,4,5 des Config-Reg */ |
| #define ELSA_IRQ_IDX_PCC8 0x30 /* Bit 4,5 des Config-Reg */ |
| #define ELSA_IRQ_IDX_PC 0x0c /* Bit 2,3 des Config-Reg */ |
| |
| /* Control-Register (Write) */ |
| #define ELSA_LINE_LED 0x02 /* Bit 1 Gelbe LED */ |
| #define ELSA_STAT_LED 0x08 /* Bit 3 Gruene LED */ |
| #define ELSA_ISDN_RESET 0x20 /* Bit 5 Reset-Leitung */ |
| #define ELSA_ENA_TIMER_INT 0x80 /* Bit 7 Freigabe Timer Interrupt */ |
| |
| /* ALE-Register (Read) */ |
| #define ELSA_HW_RELEASE 0x07 /* Bit 0-2 Hardwarerkennung */ |
| #define ELSA_S0_POWER_BAD 0x08 /* Bit 3 S0-Bus Spannung fehlt */ |
| |
| /* Status Flags */ |
| #define ELIRQF_TIMER_AKTIV 1 |
| #define ELSA_BAD_PWR 2 |
| #define ELSA_ASSIGN 4 |
| |
| #define RS_ISR_PASS_LIMIT 256 |
| #define FLG_MODEM_ACTIVE 1 |
| /* IPAC AUX */ |
| #define ELSA_IPAC_LINE_LED 0x40 /* Bit 6 Gelbe LED */ |
| #define ELSA_IPAC_STAT_LED 0x80 /* Bit 7 Gruene LED */ |
| |
| #if ARCOFI_USE |
| static struct arcofi_msg ARCOFI_XOP_F = |
| {NULL,0,2,{0xa1,0x3f,0,0,0,0,0,0,0,0}}; /* Normal OP */ |
| static struct arcofi_msg ARCOFI_XOP_1 = |
| {&ARCOFI_XOP_F,0,2,{0xa1,0x31,0,0,0,0,0,0,0,0}}; /* PWR UP */ |
| static struct arcofi_msg ARCOFI_SOP_F = |
| {&ARCOFI_XOP_1,0,10,{0xa1,0x1f,0x00,0x50,0x10,0x00,0x00,0x80,0x02,0x12}}; |
| static struct arcofi_msg ARCOFI_COP_9 = |
| {&ARCOFI_SOP_F,0,10,{0xa1,0x29,0x80,0xcb,0xe9,0x88,0x00,0xc8,0xd8,0x80}}; /* RX */ |
| static struct arcofi_msg ARCOFI_COP_8 = |
| {&ARCOFI_COP_9,0,10,{0xa1,0x28,0x49,0x31,0x8,0x13,0x6e,0x88,0x2a,0x61}}; /* TX */ |
| static struct arcofi_msg ARCOFI_COP_7 = |
| {&ARCOFI_COP_8,0,4,{0xa1,0x27,0x80,0x80,0,0,0,0,0,0}}; /* GZ */ |
| static struct arcofi_msg ARCOFI_COP_6 = |
| {&ARCOFI_COP_7,0,6,{0xa1,0x26,0,0,0x82,0x7c,0,0,0,0}}; /* GRL GRH */ |
| static struct arcofi_msg ARCOFI_COP_5 = |
| {&ARCOFI_COP_6,0,4,{0xa1,0x25,0xbb,0x4a,0,0,0,0,0,0}}; /* GTX */ |
| static struct arcofi_msg ARCOFI_VERSION = |
| {NULL,1,2,{0xa0,0,0,0,0,0,0,0,0,0}}; |
| static struct arcofi_msg ARCOFI_XOP_0 = |
| {NULL,0,2,{0xa1,0x30,0,0,0,0,0,0,0,0}}; /* PWR Down */ |
| |
| static void set_arcofi(struct IsdnCardState *cs, int bc); |
| |
| #include "elsa_ser.c" |
| #endif /* ARCOFI_USE */ |
| |
| static inline u_char |
| readreg(unsigned int ale, unsigned int adr, u_char off) |
| { |
| register u_char ret; |
| |
| byteout(ale, off); |
| ret = bytein(adr); |
| return (ret); |
| } |
| |
| static inline void |
| readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size) |
| { |
| byteout(ale, off); |
| insb(adr, data, size); |
| } |
| |
| |
| static inline void |
| writereg(unsigned int ale, unsigned int adr, u_char off, u_char data) |
| { |
| byteout(ale, off); |
| byteout(adr, data); |
| } |
| |
| static inline void |
| writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size) |
| { |
| byteout(ale, off); |
| outsb(adr, data, size); |
| } |
| |
| /* Interface functions */ |
| |
| static u_char |
| ReadISAC(struct IsdnCardState *cs, u_char offset) |
| { |
| return (readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset)); |
| } |
| |
| static void |
| WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value) |
| { |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset, value); |
| } |
| |
| static void |
| ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size) |
| { |
| readfifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0, data, size); |
| } |
| |
| static void |
| WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size) |
| { |
| writefifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0, data, size); |
| } |
| |
| static u_char |
| ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset) |
| { |
| return (readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset+0x80)); |
| } |
| |
| static void |
| WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value) |
| { |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, offset|0x80, value); |
| } |
| |
| static void |
| ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size) |
| { |
| readfifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0x80, data, size); |
| } |
| |
| static void |
| WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size) |
| { |
| writefifo(cs->hw.elsa.ale, cs->hw.elsa.isac, 0x80, data, size); |
| } |
| |
| static u_char |
| ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset) |
| { |
| return (readreg(cs->hw.elsa.ale, |
| cs->hw.elsa.hscx, offset + (hscx ? 0x40 : 0))); |
| } |
| |
| static void |
| WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value) |
| { |
| writereg(cs->hw.elsa.ale, |
| cs->hw.elsa.hscx, offset + (hscx ? 0x40 : 0), value); |
| } |
| |
| static inline u_char |
| readitac(struct IsdnCardState *cs, u_char off) |
| { |
| register u_char ret; |
| |
| byteout(cs->hw.elsa.ale, off); |
| ret = bytein(cs->hw.elsa.itac); |
| return (ret); |
| } |
| |
| static inline void |
| writeitac(struct IsdnCardState *cs, u_char off, u_char data) |
| { |
| byteout(cs->hw.elsa.ale, off); |
| byteout(cs->hw.elsa.itac, data); |
| } |
| |
| static inline int |
| TimerRun(struct IsdnCardState *cs) |
| { |
| register u_char v; |
| |
| v = bytein(cs->hw.elsa.cfg); |
| if ((cs->subtyp == ELSA_QS1000) || (cs->subtyp == ELSA_QS3000)) |
| return (0 == (v & ELIRQF_TIMER_RUN)); |
| else if (cs->subtyp == ELSA_PCC8) |
| return (v & ELIRQF_TIMER_RUN_PCC8); |
| return (v & ELIRQF_TIMER_RUN); |
| } |
| /* |
| * fast interrupt HSCX stuff goes here |
| */ |
| |
| #define READHSCX(cs, nr, reg) readreg(cs->hw.elsa.ale, \ |
| cs->hw.elsa.hscx, reg + (nr ? 0x40 : 0)) |
| #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.elsa.ale, \ |
| cs->hw.elsa.hscx, reg + (nr ? 0x40 : 0), data) |
| |
| #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.elsa.ale, \ |
| cs->hw.elsa.hscx, (nr ? 0x40 : 0), ptr, cnt) |
| |
| #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.elsa.ale, \ |
| cs->hw.elsa.hscx, (nr ? 0x40 : 0), ptr, cnt) |
| |
| #include "hscx_irq.c" |
| |
| static irqreturn_t |
| elsa_interrupt(int intno, void *dev_id) |
| { |
| struct IsdnCardState *cs = dev_id; |
| u_long flags; |
| u_char val; |
| int icnt=5; |
| |
| if ((cs->typ == ISDN_CTYPE_ELSA_PCMCIA) && (*cs->busy_flag == 1)) { |
| /* The card tends to generate interrupts while being removed |
| causing us to just crash the kernel. bad. */ |
| printk(KERN_WARNING "Elsa: card not available!\n"); |
| return IRQ_NONE; |
| } |
| spin_lock_irqsave(&cs->lock, flags); |
| #if ARCOFI_USE |
| if (cs->hw.elsa.MFlag) { |
| val = serial_inp(cs, UART_IIR); |
| if (!(val & UART_IIR_NO_INT)) { |
| debugl1(cs,"IIR %02x", val); |
| rs_interrupt_elsa(cs); |
| } |
| } |
| #endif |
| val = readreg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_ISTA + 0x40); |
| Start_HSCX: |
| if (val) { |
| hscx_int_main(cs, val); |
| } |
| val = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_ISTA); |
| Start_ISAC: |
| if (val) { |
| isac_interrupt(cs, val); |
| } |
| val = readreg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_ISTA + 0x40); |
| if (val && icnt) { |
| if (cs->debug & L1_DEB_HSCX) |
| debugl1(cs, "HSCX IntStat after IntRoutine"); |
| icnt--; |
| goto Start_HSCX; |
| } |
| val = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_ISTA); |
| if (val && icnt) { |
| if (cs->debug & L1_DEB_ISAC) |
| debugl1(cs, "ISAC IntStat after IntRoutine"); |
| icnt--; |
| goto Start_ISAC; |
| } |
| if (!icnt) |
| printk(KERN_WARNING"ELSA IRQ LOOP\n"); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK, 0xFF); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK + 0x40, 0xFF); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_MASK, 0xFF); |
| if (cs->hw.elsa.status & ELIRQF_TIMER_AKTIV) { |
| if (!TimerRun(cs)) { |
| /* Timer Restart */ |
| byteout(cs->hw.elsa.timer, 0); |
| cs->hw.elsa.counter++; |
| } |
| } |
| #if ARCOFI_USE |
| if (cs->hw.elsa.MFlag) { |
| val = serial_inp(cs, UART_MCR); |
| val ^= 0x8; |
| serial_outp(cs, UART_MCR, val); |
| val = serial_inp(cs, UART_MCR); |
| val ^= 0x8; |
| serial_outp(cs, UART_MCR, val); |
| } |
| #endif |
| if (cs->hw.elsa.trig) |
| byteout(cs->hw.elsa.trig, 0x00); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK, 0x0); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_MASK + 0x40, 0x0); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_MASK, 0x0); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| elsa_interrupt_ipac(int intno, void *dev_id) |
| { |
| struct IsdnCardState *cs = dev_id; |
| u_long flags; |
| u_char ista,val; |
| int icnt=5; |
| |
| spin_lock_irqsave(&cs->lock, flags); |
| if (cs->subtyp == ELSA_QS1000PCI || cs->subtyp == ELSA_QS3000PCI) { |
| val = bytein(cs->hw.elsa.cfg + 0x4c); /* PCI IRQ */ |
| if (!(val & ELSA_PCI_IRQ_MASK)) { |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return IRQ_NONE; |
| } |
| } |
| #if ARCOFI_USE |
| if (cs->hw.elsa.MFlag) { |
| val = serial_inp(cs, UART_IIR); |
| if (!(val & UART_IIR_NO_INT)) { |
| debugl1(cs,"IIR %02x", val); |
| rs_interrupt_elsa(cs); |
| } |
| } |
| #endif |
| ista = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ISTA); |
| Start_IPAC: |
| if (cs->debug & L1_DEB_IPAC) |
| debugl1(cs, "IPAC ISTA %02X", ista); |
| if (ista & 0x0f) { |
| val = readreg(cs->hw.elsa.ale, cs->hw.elsa.hscx, HSCX_ISTA + 0x40); |
| if (ista & 0x01) |
| val |= 0x01; |
| if (ista & 0x04) |
| val |= 0x02; |
| if (ista & 0x08) |
| val |= 0x04; |
| if (val) |
| hscx_int_main(cs, val); |
| } |
| if (ista & 0x20) { |
| val = 0xfe & readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, ISAC_ISTA + 0x80); |
| if (val) { |
| isac_interrupt(cs, val); |
| } |
| } |
| if (ista & 0x10) { |
| val = 0x01; |
| isac_interrupt(cs, val); |
| } |
| ista = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ISTA); |
| if ((ista & 0x3f) && icnt) { |
| icnt--; |
| goto Start_IPAC; |
| } |
| if (!icnt) |
| printk(KERN_WARNING "ELSA IRQ LOOP\n"); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_MASK, 0xFF); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_MASK, 0xC0); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static void |
| release_io_elsa(struct IsdnCardState *cs) |
| { |
| int bytecnt = 8; |
| |
| del_timer(&cs->hw.elsa.tl); |
| #if ARCOFI_USE |
| clear_arcofi(cs); |
| #endif |
| if (cs->hw.elsa.ctrl) |
| byteout(cs->hw.elsa.ctrl, 0); /* LEDs Out */ |
| if (cs->subtyp == ELSA_QS1000PCI) { |
| byteout(cs->hw.elsa.cfg + 0x4c, 0x01); /* disable IRQ */ |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff); |
| bytecnt = 2; |
| release_region(cs->hw.elsa.cfg, 0x80); |
| } |
| if (cs->subtyp == ELSA_QS3000PCI) { |
| byteout(cs->hw.elsa.cfg + 0x4c, 0x03); /* disable ELSA PCI IRQ */ |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff); |
| release_region(cs->hw.elsa.cfg, 0x80); |
| } |
| if (cs->subtyp == ELSA_PCMCIA_IPAC) { |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff); |
| } |
| if ((cs->subtyp == ELSA_PCFPRO) || |
| (cs->subtyp == ELSA_QS3000) || |
| (cs->subtyp == ELSA_PCF) || |
| (cs->subtyp == ELSA_QS3000PCI)) { |
| bytecnt = 16; |
| #if ARCOFI_USE |
| release_modem(cs); |
| #endif |
| } |
| if (cs->hw.elsa.base) |
| release_region(cs->hw.elsa.base, bytecnt); |
| } |
| |
| static void |
| reset_elsa(struct IsdnCardState *cs) |
| { |
| if (cs->hw.elsa.timer) { |
| /* Wait 1 Timer */ |
| byteout(cs->hw.elsa.timer, 0); |
| while (TimerRun(cs)); |
| cs->hw.elsa.ctrl_reg |= 0x50; |
| cs->hw.elsa.ctrl_reg &= ~ELSA_ISDN_RESET; /* Reset On */ |
| byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg); |
| /* Wait 1 Timer */ |
| byteout(cs->hw.elsa.timer, 0); |
| while (TimerRun(cs)); |
| cs->hw.elsa.ctrl_reg |= ELSA_ISDN_RESET; /* Reset Off */ |
| byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg); |
| /* Wait 1 Timer */ |
| byteout(cs->hw.elsa.timer, 0); |
| while (TimerRun(cs)); |
| if (cs->hw.elsa.trig) |
| byteout(cs->hw.elsa.trig, 0xff); |
| } |
| if ((cs->subtyp == ELSA_QS1000PCI) || (cs->subtyp == ELSA_QS3000PCI) || (cs->subtyp == ELSA_PCMCIA_IPAC)) { |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_POTA2, 0x20); |
| mdelay(10); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_POTA2, 0x00); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_MASK, 0xc0); |
| mdelay(10); |
| if (cs->subtyp != ELSA_PCMCIA_IPAC) { |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ACFG, 0x0); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_AOE, 0x3c); |
| } else { |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_PCFG, 0x10); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ACFG, 0x4); |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_AOE, 0xf8); |
| } |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, 0xff); |
| if (cs->subtyp == ELSA_QS1000PCI) |
| byteout(cs->hw.elsa.cfg + 0x4c, 0x41); /* enable ELSA PCI IRQ */ |
| else if (cs->subtyp == ELSA_QS3000PCI) |
| byteout(cs->hw.elsa.cfg + 0x4c, 0x43); /* enable ELSA PCI IRQ */ |
| } |
| } |
| |
| #if ARCOFI_USE |
| |
| static void |
| set_arcofi(struct IsdnCardState *cs, int bc) { |
| cs->dc.isac.arcofi_bc = bc; |
| arcofi_fsm(cs, ARCOFI_START, &ARCOFI_COP_5); |
| interruptible_sleep_on(&cs->dc.isac.arcofi_wait); |
| } |
| |
| static int |
| check_arcofi(struct IsdnCardState *cs) |
| { |
| int arcofi_present = 0; |
| char tmp[40]; |
| char *t; |
| u_char *p; |
| |
| if (!cs->dc.isac.mon_tx) |
| if (!(cs->dc.isac.mon_tx=kmalloc(MAX_MON_FRAME, GFP_ATOMIC))) { |
| if (cs->debug & L1_DEB_WARN) |
| debugl1(cs, "ISAC MON TX out of buffers!"); |
| return(0); |
| } |
| cs->dc.isac.arcofi_bc = 0; |
| arcofi_fsm(cs, ARCOFI_START, &ARCOFI_VERSION); |
| interruptible_sleep_on(&cs->dc.isac.arcofi_wait); |
| if (!test_and_clear_bit(FLG_ARCOFI_ERROR, &cs->HW_Flags)) { |
| debugl1(cs, "Arcofi response received %d bytes", cs->dc.isac.mon_rxp); |
| p = cs->dc.isac.mon_rx; |
| t = tmp; |
| t += sprintf(tmp, "Arcofi data"); |
| QuickHex(t, p, cs->dc.isac.mon_rxp); |
| debugl1(cs, tmp); |
| if ((cs->dc.isac.mon_rxp == 2) && (cs->dc.isac.mon_rx[0] == 0xa0)) { |
| switch(cs->dc.isac.mon_rx[1]) { |
| case 0x80: |
| debugl1(cs, "Arcofi 2160 detected"); |
| arcofi_present = 1; |
| break; |
| case 0x82: |
| debugl1(cs, "Arcofi 2165 detected"); |
| arcofi_present = 2; |
| break; |
| case 0x84: |
| debugl1(cs, "Arcofi 2163 detected"); |
| arcofi_present = 3; |
| break; |
| default: |
| debugl1(cs, "unknown Arcofi response"); |
| break; |
| } |
| } else |
| debugl1(cs, "undefined Monitor response"); |
| cs->dc.isac.mon_rxp = 0; |
| } else if (cs->dc.isac.mon_tx) { |
| debugl1(cs, "Arcofi not detected"); |
| } |
| if (arcofi_present) { |
| if (cs->subtyp==ELSA_QS1000) { |
| cs->subtyp = ELSA_QS3000; |
| printk(KERN_INFO |
| "Elsa: %s detected modem at 0x%lx\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base+8); |
| release_region(cs->hw.elsa.base, 8); |
| if (!request_region(cs->hw.elsa.base, 16, "elsa isdn modem")) { |
| printk(KERN_WARNING |
| "HiSax: %s config port %lx-%lx already in use\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base + 8, |
| cs->hw.elsa.base + 16); |
| } |
| } else if (cs->subtyp==ELSA_PCC16) { |
| cs->subtyp = ELSA_PCF; |
| printk(KERN_INFO |
| "Elsa: %s detected modem at 0x%lx\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base+8); |
| release_region(cs->hw.elsa.base, 8); |
| if (!request_region(cs->hw.elsa.base, 16, "elsa isdn modem")) { |
| printk(KERN_WARNING |
| "HiSax: %s config port %lx-%lx already in use\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base + 8, |
| cs->hw.elsa.base + 16); |
| } |
| } else |
| printk(KERN_INFO |
| "Elsa: %s detected modem at 0x%lx\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base+8); |
| arcofi_fsm(cs, ARCOFI_START, &ARCOFI_XOP_0); |
| interruptible_sleep_on(&cs->dc.isac.arcofi_wait); |
| return(1); |
| } |
| return(0); |
| } |
| #endif /* ARCOFI_USE */ |
| |
| static void |
| elsa_led_handler(struct IsdnCardState *cs) |
| { |
| int blink = 0; |
| |
| if (cs->subtyp == ELSA_PCMCIA || cs->subtyp == ELSA_PCMCIA_IPAC) |
| return; |
| del_timer(&cs->hw.elsa.tl); |
| if (cs->hw.elsa.status & ELSA_ASSIGN) |
| cs->hw.elsa.ctrl_reg |= ELSA_STAT_LED; |
| else if (cs->hw.elsa.status & ELSA_BAD_PWR) |
| cs->hw.elsa.ctrl_reg &= ~ELSA_STAT_LED; |
| else { |
| cs->hw.elsa.ctrl_reg ^= ELSA_STAT_LED; |
| blink = 250; |
| } |
| if (cs->hw.elsa.status & 0xf000) |
| cs->hw.elsa.ctrl_reg |= ELSA_LINE_LED; |
| else if (cs->hw.elsa.status & 0x0f00) { |
| cs->hw.elsa.ctrl_reg ^= ELSA_LINE_LED; |
| blink = 500; |
| } else |
| cs->hw.elsa.ctrl_reg &= ~ELSA_LINE_LED; |
| |
| if ((cs->subtyp == ELSA_QS1000PCI) || |
| (cs->subtyp == ELSA_QS3000PCI)) { |
| u_char led = 0xff; |
| if (cs->hw.elsa.ctrl_reg & ELSA_LINE_LED) |
| led ^= ELSA_IPAC_LINE_LED; |
| if (cs->hw.elsa.ctrl_reg & ELSA_STAT_LED) |
| led ^= ELSA_IPAC_STAT_LED; |
| writereg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ATX, led); |
| } else |
| byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg); |
| if (blink) { |
| init_timer(&cs->hw.elsa.tl); |
| cs->hw.elsa.tl.expires = jiffies + ((blink * HZ) / 1000); |
| add_timer(&cs->hw.elsa.tl); |
| } |
| } |
| |
| static int |
| Elsa_card_msg(struct IsdnCardState *cs, int mt, void *arg) |
| { |
| int ret = 0; |
| u_long flags; |
| |
| switch (mt) { |
| case CARD_RESET: |
| spin_lock_irqsave(&cs->lock, flags); |
| reset_elsa(cs); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return(0); |
| case CARD_RELEASE: |
| release_io_elsa(cs); |
| return(0); |
| case CARD_INIT: |
| spin_lock_irqsave(&cs->lock, flags); |
| cs->debug |= L1_DEB_IPAC; |
| reset_elsa(cs); |
| inithscxisac(cs, 1); |
| if ((cs->subtyp == ELSA_QS1000) || |
| (cs->subtyp == ELSA_QS3000)) |
| { |
| byteout(cs->hw.elsa.timer, 0); |
| } |
| if (cs->hw.elsa.trig) |
| byteout(cs->hw.elsa.trig, 0xff); |
| inithscxisac(cs, 2); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| return(0); |
| case CARD_TEST: |
| if ((cs->subtyp == ELSA_PCMCIA) || |
| (cs->subtyp == ELSA_PCMCIA_IPAC) || |
| (cs->subtyp == ELSA_QS1000PCI)) { |
| return(0); |
| } else if (cs->subtyp == ELSA_QS3000PCI) { |
| ret = 0; |
| } else { |
| spin_lock_irqsave(&cs->lock, flags); |
| cs->hw.elsa.counter = 0; |
| cs->hw.elsa.ctrl_reg |= ELSA_ENA_TIMER_INT; |
| cs->hw.elsa.status |= ELIRQF_TIMER_AKTIV; |
| byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg); |
| byteout(cs->hw.elsa.timer, 0); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| msleep(110); |
| spin_lock_irqsave(&cs->lock, flags); |
| cs->hw.elsa.ctrl_reg &= ~ELSA_ENA_TIMER_INT; |
| byteout(cs->hw.elsa.ctrl, cs->hw.elsa.ctrl_reg); |
| cs->hw.elsa.status &= ~ELIRQF_TIMER_AKTIV; |
| spin_unlock_irqrestore(&cs->lock, flags); |
| printk(KERN_INFO "Elsa: %d timer tics in 110 msek\n", |
| cs->hw.elsa.counter); |
| if ((cs->hw.elsa.counter > 10) && |
| (cs->hw.elsa.counter < 16)) { |
| printk(KERN_INFO "Elsa: timer and irq OK\n"); |
| ret = 0; |
| } else { |
| printk(KERN_WARNING |
| "Elsa: timer tic problem (%d/12) maybe an IRQ(%d) conflict\n", |
| cs->hw.elsa.counter, cs->irq); |
| ret = 1; |
| } |
| } |
| #if ARCOFI_USE |
| if (check_arcofi(cs)) { |
| init_modem(cs); |
| } |
| #endif |
| elsa_led_handler(cs); |
| return(ret); |
| case (MDL_REMOVE | REQUEST): |
| cs->hw.elsa.status &= 0; |
| break; |
| case (MDL_ASSIGN | REQUEST): |
| cs->hw.elsa.status |= ELSA_ASSIGN; |
| break; |
| case MDL_INFO_SETUP: |
| if ((long) arg) |
| cs->hw.elsa.status |= 0x0200; |
| else |
| cs->hw.elsa.status |= 0x0100; |
| break; |
| case MDL_INFO_CONN: |
| if ((long) arg) |
| cs->hw.elsa.status |= 0x2000; |
| else |
| cs->hw.elsa.status |= 0x1000; |
| break; |
| case MDL_INFO_REL: |
| if ((long) arg) { |
| cs->hw.elsa.status &= ~0x2000; |
| cs->hw.elsa.status &= ~0x0200; |
| } else { |
| cs->hw.elsa.status &= ~0x1000; |
| cs->hw.elsa.status &= ~0x0100; |
| } |
| break; |
| #if ARCOFI_USE |
| case CARD_AUX_IND: |
| if (cs->hw.elsa.MFlag) { |
| int len; |
| u_char *msg; |
| |
| if (!arg) |
| return(0); |
| msg = arg; |
| len = *msg; |
| msg++; |
| modem_write_cmd(cs, msg, len); |
| } |
| break; |
| #endif |
| } |
| if (cs->typ == ISDN_CTYPE_ELSA) { |
| int pwr = bytein(cs->hw.elsa.ale); |
| if (pwr & 0x08) |
| cs->hw.elsa.status |= ELSA_BAD_PWR; |
| else |
| cs->hw.elsa.status &= ~ELSA_BAD_PWR; |
| } |
| elsa_led_handler(cs); |
| return(ret); |
| } |
| |
| static unsigned char |
| probe_elsa_adr(unsigned int adr, int typ) |
| { |
| int i, in1, in2, p16_1 = 0, p16_2 = 0, p8_1 = 0, p8_2 = 0, pc_1 = 0, |
| pc_2 = 0, pfp_1 = 0, pfp_2 = 0; |
| |
| /* In case of the elsa pcmcia card, this region is in use, |
| reserved for us by the card manager. So we do not check it |
| here, it would fail. */ |
| if (typ != ISDN_CTYPE_ELSA_PCMCIA) { |
| if (request_region(adr, 8, "elsa card")) { |
| release_region(adr, 8); |
| } else { |
| printk(KERN_WARNING |
| "Elsa: Probing Port 0x%x: already in use\n", adr); |
| return (0); |
| } |
| } |
| for (i = 0; i < 16; i++) { |
| in1 = inb(adr + ELSA_CONFIG); /* 'toggelt' bei */ |
| in2 = inb(adr + ELSA_CONFIG); /* jedem Zugriff */ |
| p16_1 += 0x04 & in1; |
| p16_2 += 0x04 & in2; |
| p8_1 += 0x02 & in1; |
| p8_2 += 0x02 & in2; |
| pc_1 += 0x01 & in1; |
| pc_2 += 0x01 & in2; |
| pfp_1 += 0x40 & in1; |
| pfp_2 += 0x40 & in2; |
| } |
| printk(KERN_INFO "Elsa: Probing IO 0x%x", adr); |
| if (65 == ++p16_1 * ++p16_2) { |
| printk(" PCC-16/PCF found\n"); |
| return (ELSA_PCC16); |
| } else if (1025 == ++pfp_1 * ++pfp_2) { |
| printk(" PCF-Pro found\n"); |
| return (ELSA_PCFPRO); |
| } else if (33 == ++p8_1 * ++p8_2) { |
| printk(" PCC8 found\n"); |
| return (ELSA_PCC8); |
| } else if (17 == ++pc_1 * ++pc_2) { |
| printk(" PC found\n"); |
| return (ELSA_PC); |
| } else { |
| printk(" failed\n"); |
| return (0); |
| } |
| } |
| |
| static unsigned int |
| probe_elsa(struct IsdnCardState *cs) |
| { |
| int i; |
| unsigned int CARD_portlist[] = |
| {0x160, 0x170, 0x260, 0x360, 0}; |
| |
| for (i = 0; CARD_portlist[i]; i++) { |
| if ((cs->subtyp = probe_elsa_adr(CARD_portlist[i], cs->typ))) |
| break; |
| } |
| return (CARD_portlist[i]); |
| } |
| |
| static int __devinit |
| setup_elsa_isa(struct IsdnCard *card) |
| { |
| struct IsdnCardState *cs = card->cs; |
| u_char val; |
| |
| cs->hw.elsa.base = card->para[0]; |
| printk(KERN_INFO "Elsa: Microlink IO probing\n"); |
| if (cs->hw.elsa.base) { |
| if (!(cs->subtyp = probe_elsa_adr(cs->hw.elsa.base, |
| cs->typ))) { |
| printk(KERN_WARNING |
| "Elsa: no Elsa Microlink at %#lx\n", |
| cs->hw.elsa.base); |
| return (0); |
| } |
| } else |
| cs->hw.elsa.base = probe_elsa(cs); |
| |
| if (!cs->hw.elsa.base) { |
| printk(KERN_WARNING |
| "No Elsa Microlink found\n"); |
| return (0); |
| } |
| |
| cs->hw.elsa.cfg = cs->hw.elsa.base + ELSA_CONFIG; |
| cs->hw.elsa.ctrl = cs->hw.elsa.base + ELSA_CONTROL; |
| cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE; |
| cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC; |
| cs->hw.elsa.itac = cs->hw.elsa.base + ELSA_ITAC; |
| cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX; |
| cs->hw.elsa.trig = cs->hw.elsa.base + ELSA_TRIG_IRQ; |
| cs->hw.elsa.timer = cs->hw.elsa.base + ELSA_START_TIMER; |
| val = bytein(cs->hw.elsa.cfg); |
| if (cs->subtyp == ELSA_PC) { |
| const u_char CARD_IrqTab[8] = |
| {7, 3, 5, 9, 0, 0, 0, 0}; |
| cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX_PC) >> 2]; |
| } else if (cs->subtyp == ELSA_PCC8) { |
| const u_char CARD_IrqTab[8] = |
| {7, 3, 5, 9, 0, 0, 0, 0}; |
| cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX_PCC8) >> 4]; |
| } else { |
| const u_char CARD_IrqTab[8] = |
| {15, 10, 15, 3, 11, 5, 11, 9}; |
| cs->irq = CARD_IrqTab[(val & ELSA_IRQ_IDX) >> 3]; |
| } |
| val = bytein(cs->hw.elsa.ale) & ELSA_HW_RELEASE; |
| if (val < 3) |
| val |= 8; |
| val += 'A' - 3; |
| if (val == 'B' || val == 'C') |
| val ^= 1; |
| if ((cs->subtyp == ELSA_PCFPRO) && (val == 'G')) |
| val = 'C'; |
| printk(KERN_INFO |
| "Elsa: %s found at %#lx Rev.:%c IRQ %d\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base, |
| val, cs->irq); |
| val = bytein(cs->hw.elsa.ale) & ELSA_S0_POWER_BAD; |
| if (val) { |
| printk(KERN_WARNING |
| "Elsa: Microlink S0 bus power bad\n"); |
| cs->hw.elsa.status |= ELSA_BAD_PWR; |
| } |
| |
| return (1); |
| } |
| |
| #ifdef __ISAPNP__ |
| static struct isapnp_device_id elsa_ids[] __devinitdata = { |
| { ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0133), |
| ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0133), |
| (unsigned long) "Elsa QS1000" }, |
| { ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0134), |
| ISAPNP_VENDOR('E', 'L', 'S'), ISAPNP_FUNCTION(0x0134), |
| (unsigned long) "Elsa QS3000" }, |
| { 0, } |
| }; |
| |
| static struct isapnp_device_id *ipid __devinitdata = &elsa_ids[0]; |
| static struct pnp_card *pnp_c __devinitdata = NULL; |
| #endif /* __ISAPNP__ */ |
| |
| static int __devinit |
| setup_elsa_isapnp(struct IsdnCard *card) |
| { |
| struct IsdnCardState *cs = card->cs; |
| |
| #ifdef __ISAPNP__ |
| if (!card->para[1] && isapnp_present()) { |
| struct pnp_dev *pnp_d; |
| while(ipid->card_vendor) { |
| if ((pnp_c = pnp_find_card(ipid->card_vendor, |
| ipid->card_device, pnp_c))) { |
| pnp_d = NULL; |
| if ((pnp_d = pnp_find_dev(pnp_c, |
| ipid->vendor, ipid->function, pnp_d))) { |
| int err; |
| |
| printk(KERN_INFO "HiSax: %s detected\n", |
| (char *)ipid->driver_data); |
| pnp_disable_dev(pnp_d); |
| err = pnp_activate_dev(pnp_d); |
| if (err<0) { |
| printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n", |
| __func__, err); |
| return(0); |
| } |
| card->para[1] = pnp_port_start(pnp_d, 0); |
| card->para[0] = pnp_irq(pnp_d, 0); |
| |
| if (!card->para[0] || !card->para[1]) { |
| printk(KERN_ERR "Elsa PnP:some resources are missing %ld/%lx\n", |
| card->para[0], card->para[1]); |
| pnp_disable_dev(pnp_d); |
| return(0); |
| } |
| if (ipid->function == ISAPNP_FUNCTION(0x133)) |
| cs->subtyp = ELSA_QS1000; |
| else |
| cs->subtyp = ELSA_QS3000; |
| break; |
| } else { |
| printk(KERN_ERR "Elsa PnP: PnP error card found, no device\n"); |
| return(0); |
| } |
| } |
| ipid++; |
| pnp_c=NULL; |
| } |
| if (!ipid->card_vendor) { |
| printk(KERN_INFO "Elsa PnP: no ISAPnP card found\n"); |
| return(0); |
| } |
| } |
| #endif /* __ISAPNP__ */ |
| |
| if (card->para[1] && card->para[0]) { |
| cs->hw.elsa.base = card->para[1]; |
| cs->irq = card->para[0]; |
| if (!cs->subtyp) |
| cs->subtyp = ELSA_QS1000; |
| } else { |
| printk(KERN_ERR "Elsa PnP: no parameter\n"); |
| } |
| cs->hw.elsa.cfg = cs->hw.elsa.base + ELSA_CONFIG; |
| cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE; |
| cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC; |
| cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX; |
| cs->hw.elsa.trig = cs->hw.elsa.base + ELSA_TRIG_IRQ; |
| cs->hw.elsa.timer = cs->hw.elsa.base + ELSA_START_TIMER; |
| cs->hw.elsa.ctrl = cs->hw.elsa.base + ELSA_CONTROL; |
| printk(KERN_INFO |
| "Elsa: %s defined at %#lx IRQ %d\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base, |
| cs->irq); |
| |
| return (1); |
| } |
| |
| static void __devinit |
| setup_elsa_pcmcia(struct IsdnCard *card) |
| { |
| struct IsdnCardState *cs = card->cs; |
| u_char val; |
| |
| cs->hw.elsa.base = card->para[1]; |
| cs->irq = card->para[0]; |
| val = readreg(cs->hw.elsa.base + 0, cs->hw.elsa.base + 2, IPAC_ID); |
| if ((val == 1) || (val == 2)) { /* IPAC version 1.1/1.2 */ |
| cs->subtyp = ELSA_PCMCIA_IPAC; |
| cs->hw.elsa.ale = cs->hw.elsa.base + 0; |
| cs->hw.elsa.isac = cs->hw.elsa.base + 2; |
| cs->hw.elsa.hscx = cs->hw.elsa.base + 2; |
| test_and_set_bit(HW_IPAC, &cs->HW_Flags); |
| } else { |
| cs->subtyp = ELSA_PCMCIA; |
| cs->hw.elsa.ale = cs->hw.elsa.base + ELSA_ALE_PCM; |
| cs->hw.elsa.isac = cs->hw.elsa.base + ELSA_ISAC_PCM; |
| cs->hw.elsa.hscx = cs->hw.elsa.base + ELSA_HSCX; |
| } |
| cs->hw.elsa.timer = 0; |
| cs->hw.elsa.trig = 0; |
| cs->hw.elsa.ctrl = 0; |
| cs->irq_flags |= IRQF_SHARED; |
| printk(KERN_INFO |
| "Elsa: %s defined at %#lx IRQ %d\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base, |
| cs->irq); |
| } |
| |
| #ifdef CONFIG_PCI |
| static struct pci_dev *dev_qs1000 __devinitdata = NULL; |
| static struct pci_dev *dev_qs3000 __devinitdata = NULL; |
| |
| static int __devinit |
| setup_elsa_pci(struct IsdnCard *card) |
| { |
| struct IsdnCardState *cs = card->cs; |
| |
| cs->subtyp = 0; |
| if ((dev_qs1000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA, |
| PCI_DEVICE_ID_ELSA_MICROLINK, dev_qs1000))) { |
| if (pci_enable_device(dev_qs1000)) |
| return(0); |
| cs->subtyp = ELSA_QS1000PCI; |
| cs->irq = dev_qs1000->irq; |
| cs->hw.elsa.cfg = pci_resource_start(dev_qs1000, 1); |
| cs->hw.elsa.base = pci_resource_start(dev_qs1000, 3); |
| } else if ((dev_qs3000 = hisax_find_pci_device(PCI_VENDOR_ID_ELSA, |
| PCI_DEVICE_ID_ELSA_QS3000, dev_qs3000))) { |
| if (pci_enable_device(dev_qs3000)) |
| return(0); |
| cs->subtyp = ELSA_QS3000PCI; |
| cs->irq = dev_qs3000->irq; |
| cs->hw.elsa.cfg = pci_resource_start(dev_qs3000, 1); |
| cs->hw.elsa.base = pci_resource_start(dev_qs3000, 3); |
| } else { |
| printk(KERN_WARNING "Elsa: No PCI card found\n"); |
| return(0); |
| } |
| if (!cs->irq) { |
| printk(KERN_WARNING "Elsa: No IRQ for PCI card found\n"); |
| return(0); |
| } |
| |
| if (!(cs->hw.elsa.base && cs->hw.elsa.cfg)) { |
| printk(KERN_WARNING "Elsa: No IO-Adr for PCI card found\n"); |
| return(0); |
| } |
| if ((cs->hw.elsa.cfg & 0xff) || (cs->hw.elsa.base & 0xf)) { |
| printk(KERN_WARNING "Elsa: You may have a wrong PCI bios\n"); |
| printk(KERN_WARNING "Elsa: If your system hangs now, read\n"); |
| printk(KERN_WARNING "Elsa: Documentation/isdn/README.HiSax\n"); |
| } |
| cs->hw.elsa.ale = cs->hw.elsa.base; |
| cs->hw.elsa.isac = cs->hw.elsa.base +1; |
| cs->hw.elsa.hscx = cs->hw.elsa.base +1; |
| test_and_set_bit(HW_IPAC, &cs->HW_Flags); |
| cs->hw.elsa.timer = 0; |
| cs->hw.elsa.trig = 0; |
| cs->irq_flags |= IRQF_SHARED; |
| printk(KERN_INFO |
| "Elsa: %s defined at %#lx/0x%x IRQ %d\n", |
| Elsa_Types[cs->subtyp], |
| cs->hw.elsa.base, |
| cs->hw.elsa.cfg, |
| cs->irq); |
| |
| return (1); |
| } |
| |
| #else |
| |
| static int __devinit |
| setup_elsa_pci(struct IsdnCard *card) |
| { |
| return (1); |
| } |
| #endif /* CONFIG_PCI */ |
| |
| static int __devinit |
| setup_elsa_common(struct IsdnCard *card) |
| { |
| struct IsdnCardState *cs = card->cs; |
| u_char val; |
| int bytecnt; |
| |
| switch (cs->subtyp) { |
| case ELSA_PC: |
| case ELSA_PCC8: |
| case ELSA_PCC16: |
| case ELSA_QS1000: |
| case ELSA_PCMCIA: |
| case ELSA_PCMCIA_IPAC: |
| bytecnt = 8; |
| break; |
| case ELSA_PCFPRO: |
| case ELSA_PCF: |
| case ELSA_QS3000: |
| case ELSA_QS3000PCI: |
| bytecnt = 16; |
| break; |
| case ELSA_QS1000PCI: |
| bytecnt = 2; |
| break; |
| default: |
| printk(KERN_WARNING |
| "Unknown ELSA subtype %d\n", cs->subtyp); |
| return (0); |
| } |
| /* In case of the elsa pcmcia card, this region is in use, |
| reserved for us by the card manager. So we do not check it |
| here, it would fail. */ |
| if (cs->typ != ISDN_CTYPE_ELSA_PCMCIA && !request_region(cs->hw.elsa.base, bytecnt, "elsa isdn")) { |
| printk(KERN_WARNING |
| "HiSax: ELSA config port %#lx-%#lx already in use\n", |
| cs->hw.elsa.base, |
| cs->hw.elsa.base + bytecnt); |
| return (0); |
| } |
| if ((cs->subtyp == ELSA_QS1000PCI) || (cs->subtyp == ELSA_QS3000PCI)) { |
| if (!request_region(cs->hw.elsa.cfg, 0x80, "elsa isdn pci")) { |
| printk(KERN_WARNING |
| "HiSax: ELSA pci port %x-%x already in use\n", |
| cs->hw.elsa.cfg, |
| cs->hw.elsa.cfg + 0x80); |
| release_region(cs->hw.elsa.base, bytecnt); |
| return (0); |
| } |
| } |
| #if ARCOFI_USE |
| init_arcofi(cs); |
| #endif |
| setup_isac(cs); |
| cs->hw.elsa.tl.function = (void *) elsa_led_handler; |
| cs->hw.elsa.tl.data = (long) cs; |
| init_timer(&cs->hw.elsa.tl); |
| /* Teste Timer */ |
| if (cs->hw.elsa.timer) { |
| byteout(cs->hw.elsa.trig, 0xff); |
| byteout(cs->hw.elsa.timer, 0); |
| if (!TimerRun(cs)) { |
| byteout(cs->hw.elsa.timer, 0); /* 2. Versuch */ |
| if (!TimerRun(cs)) { |
| printk(KERN_WARNING |
| "Elsa: timer do not start\n"); |
| release_io_elsa(cs); |
| return (0); |
| } |
| } |
| HZDELAY((HZ/100) + 1); /* wait >=10 ms */ |
| if (TimerRun(cs)) { |
| printk(KERN_WARNING "Elsa: timer do not run down\n"); |
| release_io_elsa(cs); |
| return (0); |
| } |
| printk(KERN_INFO "Elsa: timer OK; resetting card\n"); |
| } |
| cs->BC_Read_Reg = &ReadHSCX; |
| cs->BC_Write_Reg = &WriteHSCX; |
| cs->BC_Send_Data = &hscx_fill_fifo; |
| cs->cardmsg = &Elsa_card_msg; |
| if ((cs->subtyp == ELSA_QS1000PCI) || (cs->subtyp == ELSA_QS3000PCI) || (cs->subtyp == ELSA_PCMCIA_IPAC)) { |
| cs->readisac = &ReadISAC_IPAC; |
| cs->writeisac = &WriteISAC_IPAC; |
| cs->readisacfifo = &ReadISACfifo_IPAC; |
| cs->writeisacfifo = &WriteISACfifo_IPAC; |
| cs->irq_func = &elsa_interrupt_ipac; |
| val = readreg(cs->hw.elsa.ale, cs->hw.elsa.isac, IPAC_ID); |
| printk(KERN_INFO "Elsa: IPAC version %x\n", val); |
| } else { |
| cs->readisac = &ReadISAC; |
| cs->writeisac = &WriteISAC; |
| cs->readisacfifo = &ReadISACfifo; |
| cs->writeisacfifo = &WriteISACfifo; |
| cs->irq_func = &elsa_interrupt; |
| ISACVersion(cs, "Elsa:"); |
| if (HscxVersion(cs, "Elsa:")) { |
| printk(KERN_WARNING |
| "Elsa: wrong HSCX versions check IO address\n"); |
| release_io_elsa(cs); |
| return (0); |
| } |
| } |
| if (cs->subtyp == ELSA_PC) { |
| val = readitac(cs, ITAC_SYS); |
| printk(KERN_INFO "Elsa: ITAC version %s\n", ITACVer[val & 7]); |
| writeitac(cs, ITAC_ISEN, 0); |
| writeitac(cs, ITAC_RFIE, 0); |
| writeitac(cs, ITAC_XFIE, 0); |
| writeitac(cs, ITAC_SCIE, 0); |
| writeitac(cs, ITAC_STIE, 0); |
| } |
| return (1); |
| } |
| |
| int __devinit |
| setup_elsa(struct IsdnCard *card) |
| { |
| int rc; |
| struct IsdnCardState *cs = card->cs; |
| char tmp[64]; |
| |
| strcpy(tmp, Elsa_revision); |
| printk(KERN_INFO "HiSax: Elsa driver Rev. %s\n", HiSax_getrev(tmp)); |
| cs->hw.elsa.ctrl_reg = 0; |
| cs->hw.elsa.status = 0; |
| cs->hw.elsa.MFlag = 0; |
| cs->subtyp = 0; |
| |
| if (cs->typ == ISDN_CTYPE_ELSA) { |
| rc = setup_elsa_isa(card); |
| if (!rc) |
| return (0); |
| |
| } else if (cs->typ == ISDN_CTYPE_ELSA_PNP) { |
| rc = setup_elsa_isapnp(card); |
| if (!rc) |
| return (0); |
| |
| } else if (cs->typ == ISDN_CTYPE_ELSA_PCMCIA) |
| setup_elsa_pcmcia(card); |
| |
| else if (cs->typ == ISDN_CTYPE_ELSA_PCI) { |
| rc = setup_elsa_pci(card); |
| if (!rc) |
| return (0); |
| |
| } else |
| return (0); |
| |
| return setup_elsa_common(card); |
| } |