| /* |
| * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-msm8916.h> |
| #include <dt-bindings/reset/qcom,gcc-msm8916.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. MSM8916"; |
| compatible = "qcom,msm8916"; |
| |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ |
| sdhc2 = &sdhc_2; /* SDC2 SD card slot */ |
| }; |
| |
| chosen { }; |
| |
| memory { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the reg */ |
| reg = <0 0 0 0>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| reserve_aligned@86000000 { |
| reg = <0x0 0x86000000 0x0 0x0300000>; |
| no-map; |
| }; |
| |
| smem_mem: smem_region@86300000 { |
| reg = <0x0 0x86300000 0x0 0x0100000>; |
| no-map; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0>; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x1>; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x2>; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x3>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| clocks { |
| xo_board: xo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| sleep_clk: sleep_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| |
| memory-region = <&smem_mem>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x4ab000 0x4>; |
| }; |
| |
| msmgpio: pinctrl@1000000 { |
| compatible = "qcom,msm8916-pinctrl"; |
| reg = <0x1000000 0x300000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gcc: clock-controller@1800000 { |
| compatible = "qcom,gcc-msm8916"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| reg = <0x1800000 0x80000>; |
| }; |
| |
| tcsr_mutex_regs: syscon@1905000 { |
| compatible = "syscon"; |
| reg = <0x1905000 0x20000>; |
| }; |
| |
| tcsr_mutex: hwlock { |
| compatible = "qcom,tcsr-mutex"; |
| syscon = <&tcsr_mutex_regs 0 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| rpm_msg_ram: memory@60000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x60000 0x8000>; |
| }; |
| |
| blsp1_uart1: serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78af000 0x200>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 1>, <&blsp_dma 0>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| apcs: syscon@b011000 { |
| compatible = "syscon"; |
| reg = <0x0b011000 0x1000>; |
| }; |
| |
| blsp1_uart2: serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x78b0000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 3>, <&blsp_dma 2>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| blsp_dma: dma@7884000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x07884000 0x23000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi1: spi@78b5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b5000 0x600>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 5>, <&blsp_dma 4>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi1_default>; |
| pinctrl-1 = <&spi1_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi2: spi@78b6000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b6000 0x600>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 7>, <&blsp_dma 6>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi2_default>; |
| pinctrl-1 = <&spi2_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi3: spi@78b7000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b7000 0x600>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 9>, <&blsp_dma 8>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi3_default>; |
| pinctrl-1 = <&spi3_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi4: spi@78b8000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b8000 0x600>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 11>, <&blsp_dma 10>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi4_default>; |
| pinctrl-1 = <&spi4_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi5: spi@78b9000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b9000 0x600>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 13>, <&blsp_dma 12>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi5_default>; |
| pinctrl-1 = <&spi5_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi6: spi@78ba000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078ba000 0x600>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 15>, <&blsp_dma 14>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&spi6_default>; |
| pinctrl-1 = <&spi6_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c2: i2c@78b6000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78b6000 0x1000>; |
| interrupts = <GIC_SPI 96 0>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c2_default>; |
| pinctrl-1 = <&i2c2_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c4: i2c@78b8000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78b8000 0x1000>; |
| interrupts = <GIC_SPI 98 0>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c4_default>; |
| pinctrl-1 = <&i2c4_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c6: i2c@78ba000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x78ba000 0x1000>; |
| interrupts = <GIC_SPI 100 0>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c6_default>; |
| pinctrl-1 = <&i2c6_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sdhc_1: sdhci@07824000 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x07824900 0x11c>, <0x07824000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 123 0>, <0 138 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC1_APPS_CLK>, |
| <&gcc GCC_SDCC1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| bus-width = <8>; |
| non-removable; |
| status = "disabled"; |
| }; |
| |
| sdhc_2: sdhci@07864000 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x07864900 0x11c>, <0x07864000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <0 125 0>, <0 221 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC2_APPS_CLK>, |
| <&gcc GCC_SDCC2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usb_dev: usb@78d9000 { |
| compatible = "qcom,ci-hdrc"; |
| reg = <0x78d9000 0x400>; |
| dr_mode = "peripheral"; |
| interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; |
| usb-phy = <&usb_otg>; |
| status = "disabled"; |
| }; |
| |
| usb_host: ehci@78d9000 { |
| compatible = "qcom,ehci-host"; |
| reg = <0x78d9000 0x400>; |
| interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; |
| usb-phy = <&usb_otg>; |
| status = "disabled"; |
| }; |
| |
| usb_otg: phy@78d9000 { |
| compatible = "qcom,usb-otg-snps"; |
| reg = <0x78d9000 0x400>; |
| interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>, |
| <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,vdd-levels = <1 5 7>; |
| qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; |
| dr_mode = "peripheral"; |
| qcom,otg-control = <2>; // PMIC |
| |
| clocks = <&gcc GCC_USB_HS_AHB_CLK>, |
| <&gcc GCC_USB_HS_SYSTEM_CLK>, |
| <&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| clock-names = "iface", "core", "sleep"; |
| |
| resets = <&gcc GCC_USB2A_PHY_BCR>, |
| <&gcc GCC_USB_HS_BCR>; |
| reset-names = "phy", "link"; |
| status = "disabled"; |
| }; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; |
| }; |
| |
| timer@b020000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xb020000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@b021000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb021000 0x1000>, |
| <0xb022000 0x1000>; |
| }; |
| |
| frame@b023000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb023000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b024000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb024000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b025000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb025000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b026000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb026000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b027000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb027000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@b028000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xb028000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| spmi_bus: spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x200f000 0x001000>, |
| <0x2400000 0x400000>, |
| <0x2c00000 0x400000>, |
| <0x3800000 0x200000>, |
| <0x200a000 0x002100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| rng@22000 { |
| compatible = "qcom,prng"; |
| reg = <0x00022000 0x200>; |
| clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| clock-names = "core"; |
| }; |
| }; |
| |
| smd { |
| compatible = "qcom,smd"; |
| |
| rpm { |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,ipc = <&apcs 8 0>; |
| qcom,smd-edge = <15>; |
| |
| rpm_requests { |
| compatible = "qcom,rpm-msm8916"; |
| qcom,smd-channels = "rpm_requests"; |
| |
| pm8916-regulators { |
| compatible = "qcom,rpm-pm8916-regulators"; |
| |
| pm8916_s1: s1 {}; |
| pm8916_s2: s2 {}; |
| pm8916_s3: s3 {}; |
| pm8916_s4: s4 {}; |
| |
| pm8916_l1: l1 {}; |
| pm8916_l2: l2 {}; |
| pm8916_l3: l3 {}; |
| pm8916_l4: l4 {}; |
| pm8916_l5: l5 {}; |
| pm8916_l6: l6 {}; |
| pm8916_l7: l7 {}; |
| pm8916_l8: l8 {}; |
| pm8916_l9: l9 {}; |
| pm8916_l10: l10 {}; |
| pm8916_l11: l11 {}; |
| pm8916_l12: l12 {}; |
| pm8916_l13: l13 {}; |
| pm8916_l14: l14 {}; |
| pm8916_l15: l15 {}; |
| pm8916_l16: l16 {}; |
| pm8916_l17: l17 {}; |
| pm8916_l18: l18 {}; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| #include "msm8916-pins.dtsi" |