| /* |
| * linux/drivers/message/fusion/mptspi.c |
| * For use with LSI Logic PCI chip/adapter(s) |
| * running LSI Logic Fusion MPT (Message Passing Technology) firmware. |
| * |
| * Copyright (c) 1999-2005 LSI Logic Corporation |
| * (mailto:mpt_linux_developer@lsil.com) |
| * |
| */ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /* |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; version 2 of the License. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| NO WARRANTY |
| THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| solely responsible for determining the appropriateness of using and |
| distributing the Program and assumes all risks associated with its |
| exercise of rights under this Agreement, including but not limited to |
| the risks and costs of program errors, damage to or loss of data, |
| programs or equipment, and unavailability or interruption of operations. |
| |
| DISCLAIMER OF LIABILITY |
| NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| |
| #include "linux_compat.h" /* linux-2.6 tweaks */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> /* for mdelay */ |
| #include <linux/interrupt.h> /* needed for in_interrupt() proto */ |
| #include <linux/reboot.h> /* notifier code */ |
| #include <linux/sched.h> |
| #include <linux/workqueue.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| |
| #include "mptbase.h" |
| #include "mptscsih.h" |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| #define my_NAME "Fusion MPT SPI Host driver" |
| #define my_VERSION MPT_LINUX_VERSION_COMMON |
| #define MYNAM "mptspi" |
| |
| MODULE_AUTHOR(MODULEAUTHOR); |
| MODULE_DESCRIPTION(my_NAME); |
| MODULE_LICENSE("GPL"); |
| |
| /* Command line args */ |
| #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION |
| static int mpt_dv = MPTSCSIH_DOMAIN_VALIDATION; |
| module_param(mpt_dv, int, 0); |
| MODULE_PARM_DESC(mpt_dv, " DV Algorithm: enhanced=1, basic=0 (default=MPTSCSIH_DOMAIN_VALIDATION=1)"); |
| |
| static int mpt_width = MPTSCSIH_MAX_WIDTH; |
| module_param(mpt_width, int, 0); |
| MODULE_PARM_DESC(mpt_width, " Max Bus Width: wide=1, narrow=0 (default=MPTSCSIH_MAX_WIDTH=1)"); |
| |
| static ushort mpt_factor = MPTSCSIH_MIN_SYNC; |
| module_param(mpt_factor, ushort, 0); |
| MODULE_PARM_DESC(mpt_factor, " Min Sync Factor (default=MPTSCSIH_MIN_SYNC=0x08)"); |
| #endif |
| |
| static int mpt_saf_te = MPTSCSIH_SAF_TE; |
| module_param(mpt_saf_te, int, 0); |
| MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); |
| |
| static int mpt_pq_filter = 0; |
| module_param(mpt_pq_filter, int, 0); |
| MODULE_PARM_DESC(mpt_pq_filter, " Enable peripheral qualifier filter: enable=1 (default=0)"); |
| |
| static int mptspiDoneCtx = -1; |
| static int mptspiTaskCtx = -1; |
| static int mptspiInternalCtx = -1; /* Used only for internal commands */ |
| |
| static struct scsi_host_template mptspi_driver_template = { |
| .proc_name = "mptspi", |
| .proc_info = mptscsih_proc_info, |
| .name = "MPT SPI Host", |
| .info = mptscsih_info, |
| .queuecommand = mptscsih_qcmd, |
| .slave_alloc = mptscsih_slave_alloc, |
| .slave_configure = mptscsih_slave_configure, |
| .slave_destroy = mptscsih_slave_destroy, |
| .change_queue_depth = mptscsih_change_queue_depth, |
| .eh_abort_handler = mptscsih_abort, |
| .eh_device_reset_handler = mptscsih_dev_reset, |
| .eh_bus_reset_handler = mptscsih_bus_reset, |
| .eh_host_reset_handler = mptscsih_host_reset, |
| .bios_param = mptscsih_bios_param, |
| .can_queue = MPT_SCSI_CAN_QUEUE, |
| .this_id = -1, |
| .sg_tablesize = MPT_SCSI_SG_DEPTH, |
| .max_sectors = 8192, |
| .cmd_per_lun = 7, |
| .use_clustering = ENABLE_CLUSTERING, |
| }; |
| |
| |
| /**************************************************************************** |
| * Supported hardware |
| */ |
| |
| static struct pci_device_id mptspi_pci_table[] = { |
| { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1030, |
| PCI_ANY_ID, PCI_ANY_ID }, |
| { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_1030_53C1035, |
| PCI_ANY_ID, PCI_ANY_ID }, |
| {0} /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(pci, mptspi_pci_table); |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /* |
| * mptspi_probe - Installs scsi devices per bus. |
| * @pdev: Pointer to pci_dev structure |
| * |
| * Returns 0 for success, non-zero for failure. |
| * |
| */ |
| static int |
| mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct Scsi_Host *sh; |
| MPT_SCSI_HOST *hd; |
| MPT_ADAPTER *ioc; |
| unsigned long flags; |
| int sz, ii; |
| int numSGE = 0; |
| int scale; |
| int ioc_cap; |
| u8 *mem; |
| int error=0; |
| int r; |
| |
| if ((r = mpt_attach(pdev,id)) != 0) |
| return r; |
| |
| ioc = pci_get_drvdata(pdev); |
| ioc->DoneCtx = mptspiDoneCtx; |
| ioc->TaskCtx = mptspiTaskCtx; |
| ioc->InternalCtx = mptspiInternalCtx; |
| |
| /* Added sanity check on readiness of the MPT adapter. |
| */ |
| if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { |
| printk(MYIOC_s_WARN_FMT |
| "Skipping because it's not operational!\n", |
| ioc->name); |
| return -ENODEV; |
| } |
| |
| if (!ioc->active) { |
| printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", |
| ioc->name); |
| return -ENODEV; |
| } |
| |
| /* Sanity check - ensure at least 1 port is INITIATOR capable |
| */ |
| ioc_cap = 0; |
| for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { |
| if (ioc->pfacts[ii].ProtocolFlags & |
| MPI_PORTFACTS_PROTOCOL_INITIATOR) |
| ioc_cap ++; |
| } |
| |
| if (!ioc_cap) { |
| printk(MYIOC_s_WARN_FMT |
| "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", |
| ioc->name, ioc); |
| return 0; |
| } |
| |
| sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); |
| |
| if (!sh) { |
| printk(MYIOC_s_WARN_FMT |
| "Unable to register controller with SCSI subsystem\n", |
| ioc->name); |
| return -1; |
| } |
| |
| spin_lock_irqsave(&ioc->FreeQlock, flags); |
| |
| /* Attach the SCSI Host to the IOC structure |
| */ |
| ioc->sh = sh; |
| |
| sh->io_port = 0; |
| sh->n_io_port = 0; |
| sh->irq = 0; |
| |
| /* set 16 byte cdb's */ |
| sh->max_cmd_len = 16; |
| |
| /* Yikes! This is important! |
| * Otherwise, by default, linux |
| * only scans target IDs 0-7! |
| * pfactsN->MaxDevices unreliable |
| * (not supported in early |
| * versions of the FW). |
| * max_id = 1 + actual max id, |
| * max_lun = 1 + actual last lun, |
| * see hosts.h :o( |
| */ |
| sh->max_id = MPT_MAX_SCSI_DEVICES; |
| |
| sh->max_lun = MPT_LAST_LUN + 1; |
| sh->max_channel = 0; |
| sh->this_id = ioc->pfacts[0].PortSCSIID; |
| |
| /* Required entry. |
| */ |
| sh->unique_id = ioc->id; |
| |
| /* Verify that we won't exceed the maximum |
| * number of chain buffers |
| * We can optimize: ZZ = req_sz/sizeof(SGE) |
| * For 32bit SGE's: |
| * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ |
| * + (req_sz - 64)/sizeof(SGE) |
| * A slightly different algorithm is required for |
| * 64bit SGEs. |
| */ |
| scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); |
| if (sizeof(dma_addr_t) == sizeof(u64)) { |
| numSGE = (scale - 1) * |
| (ioc->facts.MaxChainDepth-1) + scale + |
| (ioc->req_sz - 60) / (sizeof(dma_addr_t) + |
| sizeof(u32)); |
| } else { |
| numSGE = 1 + (scale - 1) * |
| (ioc->facts.MaxChainDepth-1) + scale + |
| (ioc->req_sz - 64) / (sizeof(dma_addr_t) + |
| sizeof(u32)); |
| } |
| |
| if (numSGE < sh->sg_tablesize) { |
| /* Reset this value */ |
| dprintk((MYIOC_s_INFO_FMT |
| "Resetting sg_tablesize to %d from %d\n", |
| ioc->name, numSGE, sh->sg_tablesize)); |
| sh->sg_tablesize = numSGE; |
| } |
| |
| spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| |
| hd = (MPT_SCSI_HOST *) sh->hostdata; |
| hd->ioc = ioc; |
| |
| /* SCSI needs scsi_cmnd lookup table! |
| * (with size equal to req_depth*PtrSz!) |
| */ |
| sz = ioc->req_depth * sizeof(void *); |
| mem = kmalloc(sz, GFP_ATOMIC); |
| if (mem == NULL) { |
| error = -ENOMEM; |
| goto mptspi_probe_failed; |
| } |
| |
| memset(mem, 0, sz); |
| hd->ScsiLookup = (struct scsi_cmnd **) mem; |
| |
| dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p, sz=%d\n", |
| ioc->name, hd->ScsiLookup, sz)); |
| |
| /* Allocate memory for the device structures. |
| * A non-Null pointer at an offset |
| * indicates a device exists. |
| * max_id = 1 + maximum id (hosts.h) |
| */ |
| sz = sh->max_id * sizeof(void *); |
| mem = kmalloc(sz, GFP_ATOMIC); |
| if (mem == NULL) { |
| error = -ENOMEM; |
| goto mptspi_probe_failed; |
| } |
| |
| memset(mem, 0, sz); |
| hd->Targets = (VirtDevice **) mem; |
| |
| dprintk((KERN_INFO |
| " Targets @ %p, sz=%d\n", hd->Targets, sz)); |
| |
| /* Clear the TM flags |
| */ |
| hd->tmPending = 0; |
| hd->tmState = TM_STATE_NONE; |
| hd->resetPending = 0; |
| hd->abortSCpnt = NULL; |
| |
| /* Clear the pointer used to store |
| * single-threaded commands, i.e., those |
| * issued during a bus scan, dv and |
| * configuration pages. |
| */ |
| hd->cmdPtr = NULL; |
| |
| /* Initialize this SCSI Hosts' timers |
| * To use, set the timer expires field |
| * and add_timer |
| */ |
| init_timer(&hd->timer); |
| hd->timer.data = (unsigned long) hd; |
| hd->timer.function = mptscsih_timer_expired; |
| |
| ioc->spi_data.Saf_Te = mpt_saf_te; |
| hd->mpt_pq_filter = mpt_pq_filter; |
| |
| #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION |
| if (ioc->spi_data.maxBusWidth > mpt_width) |
| ioc->spi_data.maxBusWidth = mpt_width; |
| if (ioc->spi_data.minSyncFactor < mpt_factor) |
| ioc->spi_data.minSyncFactor = mpt_factor; |
| if (ioc->spi_data.minSyncFactor == MPT_ASYNC) { |
| ioc->spi_data.maxSyncOffset = 0; |
| } |
| ioc->spi_data.mpt_dv = mpt_dv; |
| hd->negoNvram = 0; |
| |
| ddvprintk((MYIOC_s_INFO_FMT |
| "dv %x width %x factor %x saf_te %x mpt_pq_filter %x\n", |
| ioc->name, |
| mpt_dv, |
| mpt_width, |
| mpt_factor, |
| mpt_saf_te, |
| mpt_pq_filter)); |
| #else |
| hd->negoNvram = MPT_SCSICFG_USE_NVRAM; |
| ddvprintk((MYIOC_s_INFO_FMT |
| "saf_te %x mpt_pq_filter %x\n", |
| ioc->name, |
| mpt_saf_te, |
| mpt_pq_filter)); |
| #endif |
| |
| ioc->spi_data.forceDv = 0; |
| ioc->spi_data.noQas = 0; |
| |
| for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) |
| ioc->spi_data.dvStatus[ii] = |
| MPT_SCSICFG_NEGOTIATE; |
| |
| for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) |
| ioc->spi_data.dvStatus[ii] |= |
| MPT_SCSICFG_DV_NOT_DONE; |
| |
| init_waitqueue_head(&hd->scandv_waitq); |
| hd->scandv_wait_done = 0; |
| hd->last_queue_full = 0; |
| |
| error = scsi_add_host (sh, &ioc->pcidev->dev); |
| if(error) { |
| dprintk((KERN_ERR MYNAM |
| "scsi_add_host failed\n")); |
| goto mptspi_probe_failed; |
| } |
| |
| scsi_scan_host(sh); |
| return 0; |
| |
| mptspi_probe_failed: |
| |
| mptscsih_remove(pdev); |
| return error; |
| } |
| |
| static struct pci_driver mptspi_driver = { |
| .name = "mptspi", |
| .id_table = mptspi_pci_table, |
| .probe = mptspi_probe, |
| .remove = __devexit_p(mptscsih_remove), |
| .shutdown = mptscsih_shutdown, |
| #ifdef CONFIG_PM |
| .suspend = mptscsih_suspend, |
| .resume = mptscsih_resume, |
| #endif |
| }; |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /** |
| * mptspi_init - Register MPT adapter(s) as SCSI host(s) with |
| * linux scsi mid-layer. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int __init |
| mptspi_init(void) |
| { |
| |
| show_mptmod_ver(my_NAME, my_VERSION); |
| |
| mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER); |
| mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER); |
| mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, MPTSPI_DRIVER); |
| |
| if (mpt_event_register(mptspiDoneCtx, mptscsih_event_process) == 0) { |
| devtprintk((KERN_INFO MYNAM |
| ": Registered for IOC event notifications\n")); |
| } |
| |
| if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) { |
| dprintk((KERN_INFO MYNAM |
| ": Registered for IOC reset notifications\n")); |
| } |
| |
| return pci_register_driver(&mptspi_driver); |
| } |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /** |
| * mptspi_exit - Unregisters MPT adapter(s) |
| * |
| */ |
| static void __exit |
| mptspi_exit(void) |
| { |
| pci_unregister_driver(&mptspi_driver); |
| |
| mpt_reset_deregister(mptspiDoneCtx); |
| dprintk((KERN_INFO MYNAM |
| ": Deregistered for IOC reset notifications\n")); |
| |
| mpt_event_deregister(mptspiDoneCtx); |
| dprintk((KERN_INFO MYNAM |
| ": Deregistered for IOC event notifications\n")); |
| |
| mpt_deregister(mptspiInternalCtx); |
| mpt_deregister(mptspiTaskCtx); |
| mpt_deregister(mptspiDoneCtx); |
| } |
| |
| module_init(mptspi_init); |
| module_exit(mptspi_exit); |