| /* |
| * Copyright (c) 2007-2012 Nicira, Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of version 2 of the GNU General Public |
| * License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/if.h> |
| #include <linux/if_vlan.h> |
| #include <linux/jhash.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/percpu.h> |
| #include <linux/rcupdate.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/compat.h> |
| #include <net/net_namespace.h> |
| |
| #include "datapath.h" |
| #include "vport.h" |
| #include "vport-internal_dev.h" |
| |
| /* List of statically compiled vport implementations. Don't forget to also |
| * add yours to the list at the bottom of vport.h. */ |
| static const struct vport_ops *vport_ops_list[] = { |
| &ovs_netdev_vport_ops, |
| &ovs_internal_vport_ops, |
| |
| #ifdef CONFIG_OPENVSWITCH_GRE |
| &ovs_gre_vport_ops, |
| #endif |
| #ifdef CONFIG_OPENVSWITCH_VXLAN |
| &ovs_vxlan_vport_ops, |
| #endif |
| }; |
| |
| /* Protected by RCU read lock for reading, ovs_mutex for writing. */ |
| static struct hlist_head *dev_table; |
| #define VPORT_HASH_BUCKETS 1024 |
| |
| /** |
| * ovs_vport_init - initialize vport subsystem |
| * |
| * Called at module load time to initialize the vport subsystem. |
| */ |
| int ovs_vport_init(void) |
| { |
| dev_table = kzalloc(VPORT_HASH_BUCKETS * sizeof(struct hlist_head), |
| GFP_KERNEL); |
| if (!dev_table) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| /** |
| * ovs_vport_exit - shutdown vport subsystem |
| * |
| * Called at module exit time to shutdown the vport subsystem. |
| */ |
| void ovs_vport_exit(void) |
| { |
| kfree(dev_table); |
| } |
| |
| static struct hlist_head *hash_bucket(struct net *net, const char *name) |
| { |
| unsigned int hash = jhash(name, strlen(name), (unsigned long) net); |
| return &dev_table[hash & (VPORT_HASH_BUCKETS - 1)]; |
| } |
| |
| /** |
| * ovs_vport_locate - find a port that has already been created |
| * |
| * @name: name of port to find |
| * |
| * Must be called with ovs or RCU read lock. |
| */ |
| struct vport *ovs_vport_locate(struct net *net, const char *name) |
| { |
| struct hlist_head *bucket = hash_bucket(net, name); |
| struct vport *vport; |
| |
| hlist_for_each_entry_rcu(vport, bucket, hash_node) |
| if (!strcmp(name, vport->ops->get_name(vport)) && |
| net_eq(ovs_dp_get_net(vport->dp), net)) |
| return vport; |
| |
| return NULL; |
| } |
| |
| /** |
| * ovs_vport_alloc - allocate and initialize new vport |
| * |
| * @priv_size: Size of private data area to allocate. |
| * @ops: vport device ops |
| * |
| * Allocate and initialize a new vport defined by @ops. The vport will contain |
| * a private data area of size @priv_size that can be accessed using |
| * vport_priv(). vports that are no longer needed should be released with |
| * vport_free(). |
| */ |
| struct vport *ovs_vport_alloc(int priv_size, const struct vport_ops *ops, |
| const struct vport_parms *parms) |
| { |
| struct vport *vport; |
| size_t alloc_size; |
| |
| alloc_size = sizeof(struct vport); |
| if (priv_size) { |
| alloc_size = ALIGN(alloc_size, VPORT_ALIGN); |
| alloc_size += priv_size; |
| } |
| |
| vport = kzalloc(alloc_size, GFP_KERNEL); |
| if (!vport) |
| return ERR_PTR(-ENOMEM); |
| |
| vport->dp = parms->dp; |
| vport->port_no = parms->port_no; |
| vport->upcall_portid = parms->upcall_portid; |
| vport->ops = ops; |
| INIT_HLIST_NODE(&vport->dp_hash_node); |
| |
| vport->percpu_stats = alloc_percpu(struct pcpu_tstats); |
| if (!vport->percpu_stats) { |
| kfree(vport); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| spin_lock_init(&vport->stats_lock); |
| |
| return vport; |
| } |
| |
| /** |
| * ovs_vport_free - uninitialize and free vport |
| * |
| * @vport: vport to free |
| * |
| * Frees a vport allocated with vport_alloc() when it is no longer needed. |
| * |
| * The caller must ensure that an RCU grace period has passed since the last |
| * time @vport was in a datapath. |
| */ |
| void ovs_vport_free(struct vport *vport) |
| { |
| free_percpu(vport->percpu_stats); |
| kfree(vport); |
| } |
| |
| /** |
| * ovs_vport_add - add vport device (for kernel callers) |
| * |
| * @parms: Information about new vport. |
| * |
| * Creates a new vport with the specified configuration (which is dependent on |
| * device type). ovs_mutex must be held. |
| */ |
| struct vport *ovs_vport_add(const struct vport_parms *parms) |
| { |
| struct vport *vport; |
| int err = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vport_ops_list); i++) { |
| if (vport_ops_list[i]->type == parms->type) { |
| struct hlist_head *bucket; |
| |
| vport = vport_ops_list[i]->create(parms); |
| if (IS_ERR(vport)) { |
| err = PTR_ERR(vport); |
| goto out; |
| } |
| |
| bucket = hash_bucket(ovs_dp_get_net(vport->dp), |
| vport->ops->get_name(vport)); |
| hlist_add_head_rcu(&vport->hash_node, bucket); |
| return vport; |
| } |
| } |
| |
| err = -EAFNOSUPPORT; |
| |
| out: |
| return ERR_PTR(err); |
| } |
| |
| /** |
| * ovs_vport_set_options - modify existing vport device (for kernel callers) |
| * |
| * @vport: vport to modify. |
| * @options: New configuration. |
| * |
| * Modifies an existing device with the specified configuration (which is |
| * dependent on device type). ovs_mutex must be held. |
| */ |
| int ovs_vport_set_options(struct vport *vport, struct nlattr *options) |
| { |
| if (!vport->ops->set_options) |
| return -EOPNOTSUPP; |
| return vport->ops->set_options(vport, options); |
| } |
| |
| /** |
| * ovs_vport_del - delete existing vport device |
| * |
| * @vport: vport to delete. |
| * |
| * Detaches @vport from its datapath and destroys it. It is possible to fail |
| * for reasons such as lack of memory. ovs_mutex must be held. |
| */ |
| void ovs_vport_del(struct vport *vport) |
| { |
| ASSERT_OVSL(); |
| |
| hlist_del_rcu(&vport->hash_node); |
| |
| vport->ops->destroy(vport); |
| } |
| |
| /** |
| * ovs_vport_get_stats - retrieve device stats |
| * |
| * @vport: vport from which to retrieve the stats |
| * @stats: location to store stats |
| * |
| * Retrieves transmit, receive, and error stats for the given device. |
| * |
| * Must be called with ovs_mutex or rcu_read_lock. |
| */ |
| void ovs_vport_get_stats(struct vport *vport, struct ovs_vport_stats *stats) |
| { |
| int i; |
| |
| memset(stats, 0, sizeof(*stats)); |
| |
| /* We potentially have 2 sources of stats that need to be combined: |
| * those we have collected (split into err_stats and percpu_stats) from |
| * set_stats() and device error stats from netdev->get_stats() (for |
| * errors that happen downstream and therefore aren't reported through |
| * our vport_record_error() function). |
| * Stats from first source are reported by ovs (OVS_VPORT_ATTR_STATS). |
| * netdev-stats can be directly read over netlink-ioctl. |
| */ |
| |
| spin_lock_bh(&vport->stats_lock); |
| |
| stats->rx_errors = vport->err_stats.rx_errors; |
| stats->tx_errors = vport->err_stats.tx_errors; |
| stats->tx_dropped = vport->err_stats.tx_dropped; |
| stats->rx_dropped = vport->err_stats.rx_dropped; |
| |
| spin_unlock_bh(&vport->stats_lock); |
| |
| for_each_possible_cpu(i) { |
| const struct pcpu_tstats *percpu_stats; |
| struct pcpu_tstats local_stats; |
| unsigned int start; |
| |
| percpu_stats = per_cpu_ptr(vport->percpu_stats, i); |
| |
| do { |
| start = u64_stats_fetch_begin_bh(&percpu_stats->syncp); |
| local_stats = *percpu_stats; |
| } while (u64_stats_fetch_retry_bh(&percpu_stats->syncp, start)); |
| |
| stats->rx_bytes += local_stats.rx_bytes; |
| stats->rx_packets += local_stats.rx_packets; |
| stats->tx_bytes += local_stats.tx_bytes; |
| stats->tx_packets += local_stats.tx_packets; |
| } |
| } |
| |
| /** |
| * ovs_vport_get_options - retrieve device options |
| * |
| * @vport: vport from which to retrieve the options. |
| * @skb: sk_buff where options should be appended. |
| * |
| * Retrieves the configuration of the given device, appending an |
| * %OVS_VPORT_ATTR_OPTIONS attribute that in turn contains nested |
| * vport-specific attributes to @skb. |
| * |
| * Returns 0 if successful, -EMSGSIZE if @skb has insufficient room, or another |
| * negative error code if a real error occurred. If an error occurs, @skb is |
| * left unmodified. |
| * |
| * Must be called with ovs_mutex or rcu_read_lock. |
| */ |
| int ovs_vport_get_options(const struct vport *vport, struct sk_buff *skb) |
| { |
| struct nlattr *nla; |
| int err; |
| |
| if (!vport->ops->get_options) |
| return 0; |
| |
| nla = nla_nest_start(skb, OVS_VPORT_ATTR_OPTIONS); |
| if (!nla) |
| return -EMSGSIZE; |
| |
| err = vport->ops->get_options(vport, skb); |
| if (err) { |
| nla_nest_cancel(skb, nla); |
| return err; |
| } |
| |
| nla_nest_end(skb, nla); |
| return 0; |
| } |
| |
| /** |
| * ovs_vport_receive - pass up received packet to the datapath for processing |
| * |
| * @vport: vport that received the packet |
| * @skb: skb that was received |
| * @tun_key: tunnel (if any) that carried packet |
| * |
| * Must be called with rcu_read_lock. The packet cannot be shared and |
| * skb->data should point to the Ethernet header. |
| */ |
| void ovs_vport_receive(struct vport *vport, struct sk_buff *skb, |
| struct ovs_key_ipv4_tunnel *tun_key) |
| { |
| struct pcpu_tstats *stats; |
| |
| stats = this_cpu_ptr(vport->percpu_stats); |
| u64_stats_update_begin(&stats->syncp); |
| stats->rx_packets++; |
| stats->rx_bytes += skb->len; |
| u64_stats_update_end(&stats->syncp); |
| |
| OVS_CB(skb)->tun_key = tun_key; |
| ovs_dp_process_received_packet(vport, skb); |
| } |
| |
| /** |
| * ovs_vport_send - send a packet on a device |
| * |
| * @vport: vport on which to send the packet |
| * @skb: skb to send |
| * |
| * Sends the given packet and returns the length of data sent. Either ovs |
| * lock or rcu_read_lock must be held. |
| */ |
| int ovs_vport_send(struct vport *vport, struct sk_buff *skb) |
| { |
| int sent = vport->ops->send(vport, skb); |
| |
| if (likely(sent > 0)) { |
| struct pcpu_tstats *stats; |
| |
| stats = this_cpu_ptr(vport->percpu_stats); |
| |
| u64_stats_update_begin(&stats->syncp); |
| stats->tx_packets++; |
| stats->tx_bytes += sent; |
| u64_stats_update_end(&stats->syncp); |
| } else if (sent < 0) { |
| ovs_vport_record_error(vport, VPORT_E_TX_ERROR); |
| kfree_skb(skb); |
| } else |
| ovs_vport_record_error(vport, VPORT_E_TX_DROPPED); |
| |
| return sent; |
| } |
| |
| /** |
| * ovs_vport_record_error - indicate device error to generic stats layer |
| * |
| * @vport: vport that encountered the error |
| * @err_type: one of enum vport_err_type types to indicate the error type |
| * |
| * If using the vport generic stats layer indicate that an error of the given |
| * type has occurred. |
| */ |
| void ovs_vport_record_error(struct vport *vport, enum vport_err_type err_type) |
| { |
| spin_lock(&vport->stats_lock); |
| |
| switch (err_type) { |
| case VPORT_E_RX_DROPPED: |
| vport->err_stats.rx_dropped++; |
| break; |
| |
| case VPORT_E_RX_ERROR: |
| vport->err_stats.rx_errors++; |
| break; |
| |
| case VPORT_E_TX_DROPPED: |
| vport->err_stats.tx_dropped++; |
| break; |
| |
| case VPORT_E_TX_ERROR: |
| vport->err_stats.tx_errors++; |
| break; |
| } |
| |
| spin_unlock(&vport->stats_lock); |
| } |
| |
| static void free_vport_rcu(struct rcu_head *rcu) |
| { |
| struct vport *vport = container_of(rcu, struct vport, rcu); |
| |
| ovs_vport_free(vport); |
| } |
| |
| void ovs_vport_deferred_free(struct vport *vport) |
| { |
| if (!vport) |
| return; |
| |
| call_rcu(&vport->rcu, free_vport_rcu); |
| } |