| /* |
| * arch/powerpc/platforms/embedded6xx/flipper-pic.c |
| * |
| * Nintendo GameCube/Wii "Flipper" interrupt controller support. |
| * Copyright (C) 2004-2009 The GameCube Linux Team |
| * Copyright (C) 2007,2008,2009 Albert Herranz |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| */ |
| #define DRV_MODULE_NAME "flipper-pic" |
| #define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/irq.h> |
| #include <linux/of.h> |
| #include <asm/io.h> |
| |
| #include "flipper-pic.h" |
| |
| #define FLIPPER_NR_IRQS 32 |
| |
| /* |
| * Each interrupt has a corresponding bit in both |
| * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers. |
| * |
| * Enabling/disabling an interrupt line involves setting/clearing |
| * the corresponding bit in IMR. |
| * Except for the RSW interrupt, all interrupts get deasserted automatically |
| * when the source deasserts the interrupt. |
| */ |
| #define FLIPPER_ICR 0x00 |
| #define FLIPPER_ICR_RSS (1<<16) /* reset switch state */ |
| |
| #define FLIPPER_IMR 0x04 |
| |
| #define FLIPPER_RESET 0x24 |
| |
| |
| /* |
| * IRQ chip hooks. |
| * |
| */ |
| |
| static void flipper_pic_mask_and_ack(unsigned int virq) |
| { |
| int irq = virq_to_hw(virq); |
| void __iomem *io_base = get_irq_chip_data(virq); |
| u32 mask = 1 << irq; |
| |
| clrbits32(io_base + FLIPPER_IMR, mask); |
| /* this is at least needed for RSW */ |
| out_be32(io_base + FLIPPER_ICR, mask); |
| } |
| |
| static void flipper_pic_ack(unsigned int virq) |
| { |
| int irq = virq_to_hw(virq); |
| void __iomem *io_base = get_irq_chip_data(virq); |
| |
| /* this is at least needed for RSW */ |
| out_be32(io_base + FLIPPER_ICR, 1 << irq); |
| } |
| |
| static void flipper_pic_mask(unsigned int virq) |
| { |
| int irq = virq_to_hw(virq); |
| void __iomem *io_base = get_irq_chip_data(virq); |
| |
| clrbits32(io_base + FLIPPER_IMR, 1 << irq); |
| } |
| |
| static void flipper_pic_unmask(unsigned int virq) |
| { |
| int irq = virq_to_hw(virq); |
| void __iomem *io_base = get_irq_chip_data(virq); |
| |
| setbits32(io_base + FLIPPER_IMR, 1 << irq); |
| } |
| |
| |
| static struct irq_chip flipper_pic = { |
| .name = "flipper-pic", |
| .ack = flipper_pic_ack, |
| .mask_ack = flipper_pic_mask_and_ack, |
| .mask = flipper_pic_mask, |
| .unmask = flipper_pic_unmask, |
| }; |
| |
| /* |
| * IRQ host hooks. |
| * |
| */ |
| |
| static struct irq_host *flipper_irq_host; |
| |
| static int flipper_pic_map(struct irq_host *h, unsigned int virq, |
| irq_hw_number_t hwirq) |
| { |
| set_irq_chip_data(virq, h->host_data); |
| irq_to_desc(virq)->status |= IRQ_LEVEL; |
| set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq); |
| return 0; |
| } |
| |
| static void flipper_pic_unmap(struct irq_host *h, unsigned int irq) |
| { |
| set_irq_chip_data(irq, NULL); |
| set_irq_chip(irq, NULL); |
| } |
| |
| static int flipper_pic_match(struct irq_host *h, struct device_node *np) |
| { |
| return 1; |
| } |
| |
| |
| static struct irq_host_ops flipper_irq_host_ops = { |
| .map = flipper_pic_map, |
| .unmap = flipper_pic_unmap, |
| .match = flipper_pic_match, |
| }; |
| |
| /* |
| * Platform hooks. |
| * |
| */ |
| |
| static void __flipper_quiesce(void __iomem *io_base) |
| { |
| /* mask and ack all IRQs */ |
| out_be32(io_base + FLIPPER_IMR, 0x00000000); |
| out_be32(io_base + FLIPPER_ICR, 0xffffffff); |
| } |
| |
| struct irq_host * __init flipper_pic_init(struct device_node *np) |
| { |
| struct device_node *pi; |
| struct irq_host *irq_host = NULL; |
| struct resource res; |
| void __iomem *io_base; |
| int retval; |
| |
| pi = of_get_parent(np); |
| if (!pi) { |
| pr_err("no parent found\n"); |
| goto out; |
| } |
| if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) { |
| pr_err("unexpected parent compatible\n"); |
| goto out; |
| } |
| |
| retval = of_address_to_resource(pi, 0, &res); |
| if (retval) { |
| pr_err("no io memory range found\n"); |
| goto out; |
| } |
| io_base = ioremap(res.start, resource_size(&res)); |
| |
| pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); |
| |
| __flipper_quiesce(io_base); |
| |
| irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS, |
| &flipper_irq_host_ops, -1); |
| if (!irq_host) { |
| pr_err("failed to allocate irq_host\n"); |
| return NULL; |
| } |
| |
| irq_host->host_data = io_base; |
| |
| out: |
| return irq_host; |
| } |
| |
| unsigned int flipper_pic_get_irq(void) |
| { |
| void __iomem *io_base = flipper_irq_host->host_data; |
| int irq; |
| u32 irq_status; |
| |
| irq_status = in_be32(io_base + FLIPPER_ICR) & |
| in_be32(io_base + FLIPPER_IMR); |
| if (irq_status == 0) |
| return NO_IRQ; /* no more IRQs pending */ |
| |
| irq = __ffs(irq_status); |
| return irq_linear_revmap(flipper_irq_host, irq); |
| } |
| |
| /* |
| * Probe function. |
| * |
| */ |
| |
| void __init flipper_pic_probe(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic"); |
| BUG_ON(!np); |
| |
| flipper_irq_host = flipper_pic_init(np); |
| BUG_ON(!flipper_irq_host); |
| |
| irq_set_default_host(flipper_irq_host); |
| |
| of_node_put(np); |
| } |
| |
| /* |
| * Misc functions related to the flipper chipset. |
| * |
| */ |
| |
| /** |
| * flipper_quiesce() - quiesce flipper irq controller |
| * |
| * Mask and ack all interrupt sources. |
| * |
| */ |
| void flipper_quiesce(void) |
| { |
| void __iomem *io_base = flipper_irq_host->host_data; |
| |
| __flipper_quiesce(io_base); |
| } |
| |
| /* |
| * Resets the platform. |
| */ |
| void flipper_platform_reset(void) |
| { |
| void __iomem *io_base; |
| |
| if (flipper_irq_host && flipper_irq_host->host_data) { |
| io_base = flipper_irq_host->host_data; |
| out_8(io_base + FLIPPER_RESET, 0x00); |
| } |
| } |
| |
| /* |
| * Returns non-zero if the reset button is pressed. |
| */ |
| int flipper_is_reset_button_pressed(void) |
| { |
| void __iomem *io_base; |
| u32 icr; |
| |
| if (flipper_irq_host && flipper_irq_host->host_data) { |
| io_base = flipper_irq_host->host_data; |
| icr = in_be32(io_base + FLIPPER_ICR); |
| return !(icr & FLIPPER_ICR_RSS); |
| } |
| return 0; |
| } |
| |