arch/arm/mach-omap2/sdrc.h - kernel/msm-4.9 - Gitiles

 #ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
 #define __ARCH_ARM_MACH_OMAP2_SDRC_H

 /*
  * OMAP2/3 SDRC/SMS macros and prototypes
  *
  * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
  * Copyright (C) 2007-2008 Nokia Corporation
  *
  * Paul Walmsley
  * Tony Lindgren
  * Richard Woodruff
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #undef DEBUG

 #ifndef __ASSEMBLER__

 #include <linux/io.h>

 extern void __iomem *omap2_sdrc_base;
 extern void __iomem *omap2_sms_base;

 #define OMAP_SDRC_REGADDR(reg)			(omap2_sdrc_base + (reg))
 #define OMAP_SMS_REGADDR(reg)			(omap2_sms_base + (reg))

 /* SDRC global register get/set */

 static inline void sdrc_write_reg(u32 val, u16 reg)
 {
 	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
 }

 static inline u32 sdrc_read_reg(u16 reg)
 {
 	return __raw_readl(OMAP_SDRC_REGADDR(reg));
 }

 /* SMS global register get/set */

 static inline void sms_write_reg(u32 val, u16 reg)
 {
 	__raw_writel(val, OMAP_SMS_REGADDR(reg));
 }

 static inline u32 sms_read_reg(u16 reg)
 {
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }

 extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);


 /**
  * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
  * @rate: SDRC clock rate (in Hz)
  * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
  * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
  * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
  * @mr: Value to program to SDRC_MR for this rate
  *
  * This structure holds a pre-computed set of register values for the
  * SDRC for a given SDRC clock rate and SDRAM chip.  These are
  * intended to be pre-computed and specified in an array in the board-*.c
  * files.  The structure is keyed off the 'rate' field.
  */
 struct omap_sdrc_params {
 	unsigned long rate;
 	u32 actim_ctrla;
 	u32 actim_ctrlb;
 	u32 rfr_ctrl;
 	u32 mr;
 };

 #ifdef CONFIG_SOC_HAS_OMAP2_SDRC
 void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 			    struct omap_sdrc_params *sdrc_cs1);
 #else
 static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 					  struct omap_sdrc_params *sdrc_cs1) {};
 #endif

 int omap2_sdrc_get_params(unsigned long r,
 			  struct omap_sdrc_params **sdrc_cs0,
 			  struct omap_sdrc_params **sdrc_cs1);
 void omap2_sms_save_context(void);
 void omap2_sms_restore_context(void);

 struct memory_timings {
 	u32 m_type;		/* ddr = 1, sdr = 0 */
 	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
 	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
 	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
 	u32 base_cs;		/* base chip select to use for calculations */
 };

 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
 struct omap_sdrc_params *rx51_get_sdram_timings(void);

 u32 omap2xxx_sdrc_dll_is_unlocked(void);
 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);


 #else
 #define OMAP242X_SDRC_REGADDR(reg)					\
 			OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
 #define OMAP243X_SDRC_REGADDR(reg)					\
 			OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
 #define OMAP34XX_SDRC_REGADDR(reg)					\
 			OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))

 #endif	/* __ASSEMBLER__ */

 /* Minimum frequency that the SDRC DLL can lock at */
 #define MIN_SDRC_DLL_LOCK_FREQ		83000000

 /* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
 #define SDRC_MPURATE_SCALE		8

 /* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
 #define SDRC_MPURATE_BASE_SHIFT		9

 /*
  * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
  * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
  */
 #define SDRC_MPURATE_LOOPS		96

 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */

 #define SDRC_SYSCONFIG		0x010
 #define SDRC_CS_CFG		0x040
 #define SDRC_SHARING		0x044
 #define SDRC_ERR_TYPE		0x04C
 #define SDRC_DLLA_CTRL		0x060
 #define SDRC_DLLA_STATUS	0x064
 #define SDRC_DLLB_CTRL		0x068
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
 #define SDRC_MCFG_0		0x080
 #define SDRC_MR_0		0x084
 #define SDRC_EMR2_0		0x08c
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
 #define SDRC_MANUAL_0		0x0a8
 #define SDRC_MCFG_1		0x0B0
 #define SDRC_MR_1		0x0B4
 #define SDRC_EMR2_1		0x0BC
 #define SDRC_ACTIM_CTRL_A_1	0x0C4
 #define SDRC_ACTIM_CTRL_B_1	0x0C8
 #define SDRC_RFR_CTRL_1		0x0D4
 #define SDRC_MANUAL_1		0x0D8

 #define SDRC_POWER_AUTOCOUNT_SHIFT	8
 #define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
 #define SDRC_POWER_CLKCTRL_SHIFT	4
 #define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
 #define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)

 /*
  * These values represent the number of memory clock cycles between
  * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
  * rows per device, and include a subtraction of a 50 cycle window in the
  * event that the autorefresh command is delayed due to other SDRC activity.
  * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
  * counter reaches 0.
  *
  * These represent optimal values for common parts, it won't work for all.
  * As long as you scale down, most parameters are still work, they just
  * become sub-optimal. The RFR value goes in the opposite direction. If you
  * don't adjust it down as your clock period increases the refresh interval
  * will not be met. Setting all parameters for complete worst case may work,
  * but may cut memory performance by 2x. Due to errata the DLLs need to be
  * unlocked and their value needs run time calibration.	A dynamic call is
  * need for that as no single right value exists acorss production samples.
  *
  * Only the FULL speed values are given. Current code is such that rate
  * changes must be made at DPLLoutx2. The actual value adjustment for low
  * frequency operation will be handled by omap_set_performance()
  *
  * By having the boot loader boot up in the fastest L4 speed available likely
  * will result in something which you can switch between.
  */
 #define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
 #define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
 #define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
 #define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
 #define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */


 /*
  * SMS register access
  */

 #define OMAP242X_SMS_REGADDR(reg)					\
 		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
 		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
 		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)

 /* SMS register offsets - read/write with sms_{read,write}_reg() */

 #define SMS_SYSCONFIG			0x010
 /* REVISIT: fill in other SMS registers here */


 #endif
	#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
	#define __ARCH_ARM_MACH_OMAP2_SDRC_H

	/*
	* OMAP2/3 SDRC/SMS macros and prototypes
	*
	* Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
	* Copyright (C) 2007-2008 Nokia Corporation
	*
	* Paul Walmsley
	* Tony Lindgren
	* Richard Woodruff
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/
	#undef DEBUG

	#ifndef __ASSEMBLER__

	#include <linux/io.h>

	extern void __iomem *omap2_sdrc_base;
	extern void __iomem *omap2_sms_base;

	#define OMAP_SDRC_REGADDR(reg) (omap2_sdrc_base + (reg))
	#define OMAP_SMS_REGADDR(reg) (omap2_sms_base + (reg))

	/* SDRC global register get/set */

	static inline void sdrc_write_reg(u32 val, u16 reg)
	{
	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
	}

	static inline u32 sdrc_read_reg(u16 reg)
	{
	return __raw_readl(OMAP_SDRC_REGADDR(reg));
	}

	/* SMS global register get/set */

	static inline void sms_write_reg(u32 val, u16 reg)
	{
	__raw_writel(val, OMAP_SMS_REGADDR(reg));
	}

	static inline u32 sms_read_reg(u16 reg)
	{
	return __raw_readl(OMAP_SMS_REGADDR(reg));
	}

	extern void omap2_set_globals_sdrc(void __iomem sdrc, void __iomem sms);


	/**
	* struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
	* @rate: SDRC clock rate (in Hz)
	* @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
	* @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
	* @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
	* @mr: Value to program to SDRC_MR for this rate
	*
	* This structure holds a pre-computed set of register values for the
	* SDRC for a given SDRC clock rate and SDRAM chip. These are
	* intended to be pre-computed and specified in an array in the board-*.c
	* files. The structure is keyed off the 'rate' field.
	*/
	struct omap_sdrc_params {
	unsigned long rate;
	u32 actim_ctrla;
	u32 actim_ctrlb;
	u32 rfr_ctrl;
	u32 mr;
	};

	#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
	void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
	struct omap_sdrc_params *sdrc_cs1);
	#else
	static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
	struct omap_sdrc_params *sdrc_cs1) {};
	#endif

	int omap2_sdrc_get_params(unsigned long r,
	struct omap_sdrc_params **sdrc_cs0,
	struct omap_sdrc_params **sdrc_cs1);
	void omap2_sms_save_context(void);
	void omap2_sms_restore_context(void);

	struct memory_timings {
	u32 m_type; /* ddr = 1, sdr = 0 */
	u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
	u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
	u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
	u32 base_cs; /* base chip select to use for calculations */
	};

	extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
	struct omap_sdrc_params *rx51_get_sdram_timings(void);

	u32 omap2xxx_sdrc_dll_is_unlocked(void);
	u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);


	#else
	#define OMAP242X_SDRC_REGADDR(reg) \
	OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
	#define OMAP243X_SDRC_REGADDR(reg) \
	OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
	#define OMAP34XX_SDRC_REGADDR(reg) \
	OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))

	#endif /* __ASSEMBLER__ */

	/* Minimum frequency that the SDRC DLL can lock at */
	#define MIN_SDRC_DLL_LOCK_FREQ 83000000

	/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
	#define SDRC_MPURATE_SCALE 8

	/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
	#define SDRC_MPURATE_BASE_SHIFT 9

	/*
	* SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
	* 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
	*/
	#define SDRC_MPURATE_LOOPS 96

	/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */

	#define SDRC_SYSCONFIG 0x010
	#define SDRC_CS_CFG 0x040
	#define SDRC_SHARING 0x044
	#define SDRC_ERR_TYPE 0x04C
	#define SDRC_DLLA_CTRL 0x060
	#define SDRC_DLLA_STATUS 0x064
	#define SDRC_DLLB_CTRL 0x068
	#define SDRC_DLLB_STATUS 0x06C
	#define SDRC_POWER 0x070
	#define SDRC_MCFG_0 0x080
	#define SDRC_MR_0 0x084
	#define SDRC_EMR2_0 0x08c
	#define SDRC_ACTIM_CTRL_A_0 0x09c
	#define SDRC_ACTIM_CTRL_B_0 0x0a0
	#define SDRC_RFR_CTRL_0 0x0a4
	#define SDRC_MANUAL_0 0x0a8
	#define SDRC_MCFG_1 0x0B0
	#define SDRC_MR_1 0x0B4
	#define SDRC_EMR2_1 0x0BC
	#define SDRC_ACTIM_CTRL_A_1 0x0C4
	#define SDRC_ACTIM_CTRL_B_1 0x0C8
	#define SDRC_RFR_CTRL_1 0x0D4
	#define SDRC_MANUAL_1 0x0D8

	#define SDRC_POWER_AUTOCOUNT_SHIFT 8
	#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
	#define SDRC_POWER_CLKCTRL_SHIFT 4
	#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
	#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)

	/*
	* These values represent the number of memory clock cycles between
	* autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
	* rows per device, and include a subtraction of a 50 cycle window in the
	* event that the autorefresh command is delayed due to other SDRC activity.
	* The '\| 1' sets the ARE field to send one autorefresh when the autorefresh
	* counter reaches 0.
	*
	* These represent optimal values for common parts, it won't work for all.
	* As long as you scale down, most parameters are still work, they just
	* become sub-optimal. The RFR value goes in the opposite direction. If you
	* don't adjust it down as your clock period increases the refresh interval
	* will not be met. Setting all parameters for complete worst case may work,
	* but may cut memory performance by 2x. Due to errata the DLLs need to be
	* unlocked and their value needs run time calibration. A dynamic call is
	* need for that as no single right value exists acorss production samples.
	*
	* Only the FULL speed values are given. Current code is such that rate
	* changes must be made at DPLLoutx2. The actual value adjustment for low
	* frequency operation will be handled by omap_set_performance()
	*
	* By having the boot loader boot up in the fastest L4 speed available likely
	* will result in something which you can switch between.
	*/
	#define SDRC_RFR_CTRL_165MHz (0x00044c00 \| 1)
	#define SDRC_RFR_CTRL_133MHz (0x0003de00 \| 1)
	#define SDRC_RFR_CTRL_100MHz (0x0002da01 \| 1)
	#define SDRC_RFR_CTRL_110MHz (0x0002da01 \| 1) /* Need to calc */
	#define SDRC_RFR_CTRL_BYPASS (0x00005000 \| 1) /* Need to calc */


	/*
	* SMS register access
	*/

	#define OMAP242X_SMS_REGADDR(reg) \
	(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
	#define OMAP243X_SMS_REGADDR(reg) \
	(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
	#define OMAP343X_SMS_REGADDR(reg) \
	(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)

	/* SMS register offsets - read/write with sms_{read,write}_reg() */

	#define SMS_SYSCONFIG 0x010
	/* REVISIT: fill in other SMS registers here */



	#endif