| /*====================================================================== |
| |
| This driver provides a method to access memory not used by the kernel |
| itself (i.e. if the kernel commandline mem=xxx is used). To actually |
| use slram at least mtdblock or mtdchar is required (for block or |
| character device access). |
| |
| Usage: |
| |
| if compiled as loadable module: |
| modprobe slram map=<name>,<start>,<end/offset> |
| if statically linked into the kernel use the following kernel cmd.line |
| slram=<name>,<start>,<end/offset> |
| |
| <name>: name of the device that will be listed in /proc/mtd |
| <start>: start of the memory region, decimal or hex (0xabcdef) |
| <end/offset>: end of the memory region. It's possible to use +0x1234 |
| to specify the offset instead of the absolute address |
| |
| NOTE: |
| With slram it's only possible to map a contiguous memory region. Therefore |
| if there's a device mapped somewhere in the region specified slram will |
| fail to load (see kernel log if modprobe fails). |
| |
| - |
| |
| Jochen Schaeuble <psionic@psionic.de> |
| |
| ======================================================================*/ |
| |
| |
| #include <linux/module.h> |
| #include <asm/uaccess.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/major.h> |
| #include <linux/fs.h> |
| #include <linux/ioctl.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| |
| #include <linux/mtd/mtd.h> |
| |
| #define SLRAM_MAX_DEVICES_PARAMS 6 /* 3 parameters / device */ |
| #define SLRAM_BLK_SZ 0x4000 |
| |
| #define T(fmt, args...) printk(KERN_DEBUG fmt, ## args) |
| #define E(fmt, args...) printk(KERN_NOTICE fmt, ## args) |
| |
| typedef struct slram_priv { |
| u_char *start; |
| u_char *end; |
| } slram_priv_t; |
| |
| typedef struct slram_mtd_list { |
| struct mtd_info *mtdinfo; |
| struct slram_mtd_list *next; |
| } slram_mtd_list_t; |
| |
| #ifdef MODULE |
| static char *map[SLRAM_MAX_DEVICES_PARAMS]; |
| |
| module_param_array(map, charp, NULL, 0); |
| MODULE_PARM_DESC(map, "List of memory regions to map. \"map=<name>, <start>, <length / end>\""); |
| #else |
| static char *map; |
| #endif |
| |
| static slram_mtd_list_t *slram_mtdlist = NULL; |
| |
| static int slram_erase(struct mtd_info *, struct erase_info *); |
| static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, void **, |
| resource_size_t *); |
| static int slram_unpoint(struct mtd_info *, loff_t, size_t); |
| static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); |
| static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); |
| |
| static int slram_erase(struct mtd_info *mtd, struct erase_info *instr) |
| { |
| slram_priv_t *priv = mtd->priv; |
| |
| memset(priv->start + instr->addr, 0xff, instr->len); |
| /* This'll catch a few races. Free the thing before returning :) |
| * I don't feel at all ashamed. This kind of thing is possible anyway |
| * with flash, but unlikely. |
| */ |
| instr->state = MTD_ERASE_DONE; |
| mtd_erase_callback(instr); |
| return(0); |
| } |
| |
| static int slram_point(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, void **virt, resource_size_t *phys) |
| { |
| slram_priv_t *priv = mtd->priv; |
| |
| *virt = priv->start + from; |
| *retlen = len; |
| return(0); |
| } |
| |
| static int slram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) |
| { |
| return 0; |
| } |
| |
| static int slram_read(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf) |
| { |
| slram_priv_t *priv = mtd->priv; |
| |
| memcpy(buf, priv->start + from, len); |
| *retlen = len; |
| return(0); |
| } |
| |
| static int slram_write(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf) |
| { |
| slram_priv_t *priv = mtd->priv; |
| |
| memcpy(priv->start + to, buf, len); |
| *retlen = len; |
| return(0); |
| } |
| |
| /*====================================================================*/ |
| |
| static int register_device(char *name, unsigned long start, unsigned long length) |
| { |
| slram_mtd_list_t **curmtd; |
| |
| curmtd = &slram_mtdlist; |
| while (*curmtd) { |
| curmtd = &(*curmtd)->next; |
| } |
| |
| *curmtd = kmalloc(sizeof(slram_mtd_list_t), GFP_KERNEL); |
| if (!(*curmtd)) { |
| E("slram: Cannot allocate new MTD device.\n"); |
| return(-ENOMEM); |
| } |
| (*curmtd)->mtdinfo = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); |
| (*curmtd)->next = NULL; |
| |
| if ((*curmtd)->mtdinfo) { |
| (*curmtd)->mtdinfo->priv = |
| kzalloc(sizeof(slram_priv_t), GFP_KERNEL); |
| |
| if (!(*curmtd)->mtdinfo->priv) { |
| kfree((*curmtd)->mtdinfo); |
| (*curmtd)->mtdinfo = NULL; |
| } |
| } |
| |
| if (!(*curmtd)->mtdinfo) { |
| E("slram: Cannot allocate new MTD device.\n"); |
| return(-ENOMEM); |
| } |
| |
| if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start = |
| ioremap(start, length))) { |
| E("slram: ioremap failed\n"); |
| return -EIO; |
| } |
| ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end = |
| ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start + length; |
| |
| |
| (*curmtd)->mtdinfo->name = name; |
| (*curmtd)->mtdinfo->size = length; |
| (*curmtd)->mtdinfo->flags = MTD_CAP_RAM; |
| (*curmtd)->mtdinfo->_erase = slram_erase; |
| (*curmtd)->mtdinfo->_point = slram_point; |
| (*curmtd)->mtdinfo->_unpoint = slram_unpoint; |
| (*curmtd)->mtdinfo->_read = slram_read; |
| (*curmtd)->mtdinfo->_write = slram_write; |
| (*curmtd)->mtdinfo->owner = THIS_MODULE; |
| (*curmtd)->mtdinfo->type = MTD_RAM; |
| (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; |
| (*curmtd)->mtdinfo->writesize = 1; |
| |
| if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0)) { |
| E("slram: Failed to register new device\n"); |
| iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start); |
| kfree((*curmtd)->mtdinfo->priv); |
| kfree((*curmtd)->mtdinfo); |
| return(-EAGAIN); |
| } |
| T("slram: Registered device %s from %luKiB to %luKiB\n", name, |
| (start / 1024), ((start + length) / 1024)); |
| T("slram: Mapped from 0x%p to 0x%p\n", |
| ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start, |
| ((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end); |
| return(0); |
| } |
| |
| static void unregister_devices(void) |
| { |
| slram_mtd_list_t *nextitem; |
| |
| while (slram_mtdlist) { |
| nextitem = slram_mtdlist->next; |
| mtd_device_unregister(slram_mtdlist->mtdinfo); |
| iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start); |
| kfree(slram_mtdlist->mtdinfo->priv); |
| kfree(slram_mtdlist->mtdinfo); |
| kfree(slram_mtdlist); |
| slram_mtdlist = nextitem; |
| } |
| } |
| |
| static unsigned long handle_unit(unsigned long value, char *unit) |
| { |
| if ((*unit == 'M') || (*unit == 'm')) { |
| return(value * 1024 * 1024); |
| } else if ((*unit == 'K') || (*unit == 'k')) { |
| return(value * 1024); |
| } |
| return(value); |
| } |
| |
| static int parse_cmdline(char *devname, char *szstart, char *szlength) |
| { |
| char *buffer; |
| unsigned long devstart; |
| unsigned long devlength; |
| |
| if ((!devname) || (!szstart) || (!szlength)) { |
| unregister_devices(); |
| return(-EINVAL); |
| } |
| |
| devstart = simple_strtoul(szstart, &buffer, 0); |
| devstart = handle_unit(devstart, buffer); |
| |
| if (*(szlength) != '+') { |
| devlength = simple_strtoul(szlength, &buffer, 0); |
| devlength = handle_unit(devlength, buffer) - devstart; |
| if (devlength < devstart) |
| goto err_out; |
| |
| devlength -= devstart; |
| } else { |
| devlength = simple_strtoul(szlength + 1, &buffer, 0); |
| devlength = handle_unit(devlength, buffer); |
| } |
| T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n", |
| devname, devstart, devlength); |
| if (devlength % SLRAM_BLK_SZ != 0) |
| goto err_out; |
| |
| if ((devstart = register_device(devname, devstart, devlength))){ |
| unregister_devices(); |
| return((int)devstart); |
| } |
| return(0); |
| |
| err_out: |
| E("slram: Illegal length parameter.\n"); |
| return(-EINVAL); |
| } |
| |
| #ifndef MODULE |
| |
| static int __init mtd_slram_setup(char *str) |
| { |
| map = str; |
| return(1); |
| } |
| |
| __setup("slram=", mtd_slram_setup); |
| |
| #endif |
| |
| static int __init init_slram(void) |
| { |
| char *devname; |
| int i; |
| |
| #ifndef MODULE |
| char *devstart; |
| char *devlength; |
| |
| i = 0; |
| |
| if (!map) { |
| E("slram: not enough parameters.\n"); |
| return(-EINVAL); |
| } |
| while (map) { |
| devname = devstart = devlength = NULL; |
| |
| if (!(devname = strsep(&map, ","))) { |
| E("slram: No devicename specified.\n"); |
| break; |
| } |
| T("slram: devname = %s\n", devname); |
| if ((!map) || (!(devstart = strsep(&map, ",")))) { |
| E("slram: No devicestart specified.\n"); |
| } |
| T("slram: devstart = %s\n", devstart); |
| if ((!map) || (!(devlength = strsep(&map, ",")))) { |
| E("slram: No devicelength / -end specified.\n"); |
| } |
| T("slram: devlength = %s\n", devlength); |
| if (parse_cmdline(devname, devstart, devlength) != 0) { |
| return(-EINVAL); |
| } |
| } |
| #else |
| int count; |
| |
| for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count]; |
| count++) { |
| } |
| |
| if ((count % 3 != 0) || (count == 0)) { |
| E("slram: not enough parameters.\n"); |
| return(-EINVAL); |
| } |
| for (i = 0; i < (count / 3); i++) { |
| devname = map[i * 3]; |
| |
| if (parse_cmdline(devname, map[i * 3 + 1], map[i * 3 + 2])!=0) { |
| return(-EINVAL); |
| } |
| |
| } |
| #endif /* !MODULE */ |
| |
| return(0); |
| } |
| |
| static void __exit cleanup_slram(void) |
| { |
| unregister_devices(); |
| } |
| |
| module_init(init_slram); |
| module_exit(cleanup_slram); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jochen Schaeuble <psionic@psionic.de>"); |
| MODULE_DESCRIPTION("MTD driver for uncached system RAM"); |