include/soc/fsl/qe/ucc_fast.h - kernel/msm-4.9 - Gitiles

 /*
  * Internal header file for UCC FAST unit routines.
  *
  * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
  * 		Li Yang <leoli@freescale.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
 #ifndef __UCC_FAST_H__
 #define __UCC_FAST_H__

 #include <linux/kernel.h>

 #include <soc/fsl/qe/immap_qe.h>
 #include <soc/fsl/qe/qe.h>

 #include <soc/fsl/qe/ucc.h>

 /* Receive BD's status and length*/
 #define R_E	0x80000000	/* buffer empty */
 #define R_W	0x20000000	/* wrap bit */
 #define R_I	0x10000000	/* interrupt on reception */
 #define R_L	0x08000000	/* last */
 #define R_F	0x04000000	/* first */

 /* transmit BD's status and length*/
 #define T_R	0x80000000	/* ready bit */
 #define T_W	0x20000000	/* wrap bit */
 #define T_I	0x10000000	/* interrupt on completion */
 #define T_L	0x08000000	/* last */

 /* Receive BD's status */
 #define R_E_S	0x8000	/* buffer empty */
 #define R_W_S	0x2000	/* wrap bit */
 #define R_I_S	0x1000	/* interrupt on reception */
 #define R_L_S	0x0800	/* last */
 #define R_F_S	0x0400	/* first */
 #define R_CM_S	0x0200	/* continuous mode */
 #define R_CR_S	0x0004	/* crc */
 #define R_OV_S	0x0002	/* crc */

 /* transmit BD's status */
 #define T_R_S	0x8000	/* ready bit */
 #define T_W_S	0x2000	/* wrap bit */
 #define T_I_S	0x1000	/* interrupt on completion */
 #define T_L_S	0x0800	/* last */
 #define T_TC_S	0x0400	/* crc */
 #define T_TM_S	0x0200	/* continuous mode */

 /* Rx Data buffer must be 4 bytes aligned in most cases */
 #define UCC_FAST_RX_ALIGN			4
 #define UCC_FAST_MRBLR_ALIGNMENT		4
 #define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8

 /* Sizes */
 #define UCC_FAST_URFS_MIN_VAL				0x88
 #define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8

 /* ucc_fast_channel_protocol_mode - UCC FAST mode */
 enum ucc_fast_channel_protocol_mode {
 	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
 	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
 	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
 	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
 	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
 	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
 	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
 	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
 	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
 	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
 	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
 	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
 	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
 	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
 	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
 	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
 };

 /* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
 enum ucc_fast_transparent_txrx {
 	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
 	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
 };

 /* UCC fast diagnostic mode */
 enum ucc_fast_diag_mode {
 	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
 	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
 	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
 	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
 };

 /* UCC fast Sync length (transparent mode only) */
 enum ucc_fast_sync_len {
 	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
 	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
 	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
 	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
 };

 /* UCC fast RTS mode */
 enum ucc_fast_ready_to_send {
 	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
 	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
 };

 /* UCC fast receiver decoding mode */
 enum ucc_fast_rx_decoding_method {
 	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
 	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
 	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
 	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
 };

 /* UCC fast transmitter encoding mode */
 enum ucc_fast_tx_encoding_method {
 	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
 	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
 	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
 	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
 };

 /* UCC fast CRC length */
 enum ucc_fast_transparent_tcrc {
 	UCC_FAST_16_BIT_CRC = 0x00000000,
 	UCC_FAST_CRC_RESERVED0 = 0x00000040,
 	UCC_FAST_32_BIT_CRC = 0x00000080,
 	UCC_FAST_CRC_RESERVED1 = 0x000000C0
 };

 /* Fast UCC initialization structure */
 struct ucc_fast_info {
 	int ucc_num;
 	int tdm_num;
 	enum qe_clock rx_clock;
 	enum qe_clock tx_clock;
 	enum qe_clock rx_sync;
 	enum qe_clock tx_sync;
 	resource_size_t regs;
 	int irq;
 	u32 uccm_mask;
 	int bd_mem_part;
 	int brkpt_support;
 	int grant_support;
 	int tsa;
 	int cdp;
 	int cds;
 	int ctsp;
 	int ctss;
 	int tci;
 	int txsy;
 	int rtsm;
 	int revd;
 	int rsyn;
 	u16 max_rx_buf_length;
 	u16 urfs;
 	u16 urfet;
 	u16 urfset;
 	u16 utfs;
 	u16 utfet;
 	u16 utftt;
 	u16 ufpt;
 	enum ucc_fast_channel_protocol_mode mode;
 	enum ucc_fast_transparent_txrx ttx_trx;
 	enum ucc_fast_tx_encoding_method tenc;
 	enum ucc_fast_rx_decoding_method renc;
 	enum ucc_fast_transparent_tcrc tcrc;
 	enum ucc_fast_sync_len synl;
 };

 struct ucc_fast_private {
 	struct ucc_fast_info *uf_info;
 	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
 	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
 	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
 	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
 #endif
 	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
 	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
 	int stopped_tx;		/* Whether channel has been stopped for Tx
 				   (STOP_TX, etc.) */
 	int stopped_rx;		/* Whether channel has been stopped for Rx */
 	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
 						    virtual fifo */
 	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
 						    virtual fifo */
 #ifdef STATISTICS
 	u32 tx_frames;		/* Transmitted frames counter. */
 	u32 rx_frames;		/* Received frames counter (only frames
 				   passed to application). */
 	u32 tx_discarded;	/* Discarded tx frames counter (frames that
 				   were discarded by the driver due to errors).
 				   */
 	u32 rx_discarded;	/* Discarded rx frames counter (frames that
 				   were discarded by the driver due to errors).
 				   */
 #endif				/* STATISTICS */
 	u16 mrblr;		/* maximum receive buffer length */
 };

 /* ucc_fast_init
  * Initializes Fast UCC according to user provided parameters.
  *
  * uf_info  - (In) pointer to the fast UCC info structure.
  * uccf_ret - (Out) pointer to the fast UCC structure.
  */
 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);

 /* ucc_fast_free
  * Frees all resources for fast UCC.
  *
  * uccf - (In) pointer to the fast UCC structure.
  */
 void ucc_fast_free(struct ucc_fast_private * uccf);

 /* ucc_fast_enable
  * Enables a fast UCC port.
  * This routine enables Tx and/or Rx through the General UCC Mode Register.
  *
  * uccf - (In) pointer to the fast UCC structure.
  * mode - (In) TX, RX, or both.
  */
 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);

 /* ucc_fast_disable
  * Disables a fast UCC port.
  * This routine disables Tx and/or Rx through the General UCC Mode Register.
  *
  * uccf - (In) pointer to the fast UCC structure.
  * mode - (In) TX, RX, or both.
  */
 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);

 /* ucc_fast_irq
  * Handles interrupts on fast UCC.
  * Called from the general interrupt routine to handle interrupts on fast UCC.
  *
  * uccf - (In) pointer to the fast UCC structure.
  */
 void ucc_fast_irq(struct ucc_fast_private * uccf);

 /* ucc_fast_transmit_on_demand
  * Immediately forces a poll of the transmitter for data to be sent.
  * Typically, the hardware performs a periodic poll for data that the
  * transmit routine has set up to be transmitted. In cases where
  * this polling cycle is not soon enough, this optional routine can
  * be invoked to force a poll right away, instead. Proper use for
  * each transmission for which this functionality is desired is to
  * call the transmit routine and then this routine right after.
  *
  * uccf - (In) pointer to the fast UCC structure.
  */
 void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);

 u32 ucc_fast_get_qe_cr_subblock(int uccf_num);

 void ucc_fast_dump_regs(struct ucc_fast_private * uccf);

 #endif				/* __UCC_FAST_H__ */
	/*
	* Internal header file for UCC FAST unit routines.
	*
	* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
	*
	* Authors: Shlomi Gridish <gridish@freescale.com>
	* Li Yang <leoli@freescale.com>
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/
	#ifndef __UCC_FAST_H__
	#define __UCC_FAST_H__

	#include <linux/kernel.h>

	#include <soc/fsl/qe/immap_qe.h>
	#include <soc/fsl/qe/qe.h>

	#include <soc/fsl/qe/ucc.h>

	/* Receive BD's status and length*/
	#define R_E 0x80000000 /* buffer empty */
	#define R_W 0x20000000 /* wrap bit */
	#define R_I 0x10000000 /* interrupt on reception */
	#define R_L 0x08000000 /* last */
	#define R_F 0x04000000 /* first */

	/* transmit BD's status and length*/
	#define T_R 0x80000000 /* ready bit */
	#define T_W 0x20000000 /* wrap bit */
	#define T_I 0x10000000 /* interrupt on completion */
	#define T_L 0x08000000 /* last */

	/* Receive BD's status */
	#define R_E_S 0x8000 /* buffer empty */
	#define R_W_S 0x2000 /* wrap bit */
	#define R_I_S 0x1000 /* interrupt on reception */
	#define R_L_S 0x0800 /* last */
	#define R_F_S 0x0400 /* first */
	#define R_CM_S 0x0200 /* continuous mode */
	#define R_CR_S 0x0004 /* crc */
	#define R_OV_S 0x0002 /* crc */

	/* transmit BD's status */
	#define T_R_S 0x8000 /* ready bit */
	#define T_W_S 0x2000 /* wrap bit */
	#define T_I_S 0x1000 /* interrupt on completion */
	#define T_L_S 0x0800 /* last */
	#define T_TC_S 0x0400 /* crc */
	#define T_TM_S 0x0200 /* continuous mode */

	/* Rx Data buffer must be 4 bytes aligned in most cases */
	#define UCC_FAST_RX_ALIGN 4
	#define UCC_FAST_MRBLR_ALIGNMENT 4
	#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8

	/* Sizes */
	#define UCC_FAST_URFS_MIN_VAL 0x88
	#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8

	/* ucc_fast_channel_protocol_mode - UCC FAST mode */
	enum ucc_fast_channel_protocol_mode {
	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
	};

	/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
	enum ucc_fast_transparent_txrx {
	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
	};

	/* UCC fast diagnostic mode */
	enum ucc_fast_diag_mode {
	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
	};

	/* UCC fast Sync length (transparent mode only) */
	enum ucc_fast_sync_len {
	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
	};

	/* UCC fast RTS mode */
	enum ucc_fast_ready_to_send {
	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
	};

	/* UCC fast receiver decoding mode */
	enum ucc_fast_rx_decoding_method {
	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
	};

	/* UCC fast transmitter encoding mode */
	enum ucc_fast_tx_encoding_method {
	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
	};

	/* UCC fast CRC length */
	enum ucc_fast_transparent_tcrc {
	UCC_FAST_16_BIT_CRC = 0x00000000,
	UCC_FAST_CRC_RESERVED0 = 0x00000040,
	UCC_FAST_32_BIT_CRC = 0x00000080,
	UCC_FAST_CRC_RESERVED1 = 0x000000C0
	};

	/* Fast UCC initialization structure */
	struct ucc_fast_info {
	int ucc_num;
	int tdm_num;
	enum qe_clock rx_clock;
	enum qe_clock tx_clock;
	enum qe_clock rx_sync;
	enum qe_clock tx_sync;
	resource_size_t regs;
	int irq;
	u32 uccm_mask;
	int bd_mem_part;
	int brkpt_support;
	int grant_support;
	int tsa;
	int cdp;
	int cds;
	int ctsp;
	int ctss;
	int tci;
	int txsy;
	int rtsm;
	int revd;
	int rsyn;
	u16 max_rx_buf_length;
	u16 urfs;
	u16 urfet;
	u16 urfset;
	u16 utfs;
	u16 utfet;
	u16 utftt;
	u16 ufpt;
	enum ucc_fast_channel_protocol_mode mode;
	enum ucc_fast_transparent_txrx ttx_trx;
	enum ucc_fast_tx_encoding_method tenc;
	enum ucc_fast_rx_decoding_method renc;
	enum ucc_fast_transparent_tcrc tcrc;
	enum ucc_fast_sync_len synl;
	};

	struct ucc_fast_private {
	struct ucc_fast_info *uf_info;
	struct ucc_fast __iomem uf_regs; / a pointer to the UCC regs. */
	u32 __iomem p_ucce; / a pointer to the event register in memory. */
	u32 __iomem p_uccm; / a pointer to the mask register in memory. */
	#ifdef CONFIG_UGETH_TX_ON_DEMAND
	u16 __iomem p_utodr; / pointer to the transmit on demand register */
	#endif
	int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
	int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
	int stopped_tx; /* Whether channel has been stopped for Tx
	(STOP_TX, etc.) */
	int stopped_rx; /* Whether channel has been stopped for Rx */
	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
	virtual fifo */
	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
	virtual fifo */
	#ifdef STATISTICS
	u32 tx_frames; /* Transmitted frames counter. */
	u32 rx_frames; /* Received frames counter (only frames
	passed to application). */
	u32 tx_discarded; /* Discarded tx frames counter (frames that
	were discarded by the driver due to errors).
	*/
	u32 rx_discarded; /* Discarded rx frames counter (frames that
	were discarded by the driver due to errors).
	*/
	#endif /* STATISTICS */
	u16 mrblr; /* maximum receive buffer length */
	};

	/* ucc_fast_init
	* Initializes Fast UCC according to user provided parameters.
	*
	* uf_info - (In) pointer to the fast UCC info structure.
	* uccf_ret - (Out) pointer to the fast UCC structure.
	*/
	int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);

	/* ucc_fast_free
	* Frees all resources for fast UCC.
	*
	* uccf - (In) pointer to the fast UCC structure.
	*/
	void ucc_fast_free(struct ucc_fast_private * uccf);

	/* ucc_fast_enable
	* Enables a fast UCC port.
	* This routine enables Tx and/or Rx through the General UCC Mode Register.
	*
	* uccf - (In) pointer to the fast UCC structure.
	* mode - (In) TX, RX, or both.
	*/
	void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);

	/* ucc_fast_disable
	* Disables a fast UCC port.
	* This routine disables Tx and/or Rx through the General UCC Mode Register.
	*
	* uccf - (In) pointer to the fast UCC structure.
	* mode - (In) TX, RX, or both.
	*/
	void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);

	/* ucc_fast_irq
	* Handles interrupts on fast UCC.
	* Called from the general interrupt routine to handle interrupts on fast UCC.
	*
	* uccf - (In) pointer to the fast UCC structure.
	*/
	void ucc_fast_irq(struct ucc_fast_private * uccf);

	/* ucc_fast_transmit_on_demand
	* Immediately forces a poll of the transmitter for data to be sent.
	* Typically, the hardware performs a periodic poll for data that the
	* transmit routine has set up to be transmitted. In cases where
	* this polling cycle is not soon enough, this optional routine can
	* be invoked to force a poll right away, instead. Proper use for
	* each transmission for which this functionality is desired is to
	* call the transmit routine and then this routine right after.
	*
	* uccf - (In) pointer to the fast UCC structure.
	*/
	void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);

	u32 ucc_fast_get_qe_cr_subblock(int uccf_num);

	void ucc_fast_dump_regs(struct ucc_fast_private * uccf);

	#endif /* __UCC_FAST_H__ */