Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
drivers/staging/Kconfig
drivers/staging/Makefile
drivers/staging/cpc-usb/TODO
drivers/staging/cpc-usb/cpc-usb_drv.c
drivers/staging/cpc-usb/cpc.h
drivers/staging/cpc-usb/cpc_int.h
drivers/staging/cpc-usb/cpcusb.h
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 55719a9..fb5c23a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -757,6 +757,42 @@
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * CAN Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
+static struct resource can_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_CAN,
+ .end = AT91SAM9263_BASE_CAN + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_CAN,
+ .end = AT91SAM9263_ID_CAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_can_device = {
+ .name = "at91_can",
+ .id = -1,
+ .resource = can_resources,
+ .num_resources = ARRAY_SIZE(can_resources),
+};
+
+void __init at91_add_device_can(struct at91_can_data *data)
+{
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */
+ at91sam9263_can_device.dev.platform_data = data;
+
+ platform_device_register(&at91sam9263_can_device);
+}
+#else
+void __init at91_add_device_can(struct at91_can_data *data) {}
+#endif
/* --------------------------------------------------------------------
* LCD Controller
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 26f1aa6..2d867fb 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -400,6 +400,23 @@
}
};
+/*
+ * CAN
+ */
+static void sam9263ek_transceiver_switch(int on)
+{
+ if (on) {
+ at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
+ at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
+ } else {
+ at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
+ at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
+ }
+}
+
+static struct at91_can_data ek_can_data = {
+ .transceiver_switch = sam9263ek_transceiver_switch,
+};
static void __init ek_board_init(void)
{
@@ -431,6 +448,8 @@
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+ /* CAN */
+ at91_add_device_can(&ek_can_data);
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 583f38a..2f4fced 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -188,6 +188,12 @@
/* Touchscreen Controller */
extern void __init at91_add_device_tsadcc(void);
+/* CAN */
+struct at91_can_data {
+ void (*transceiver_switch)(int on);
+};
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 2de6406..29e66d6 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -790,11 +790,15 @@
he_dev->rbps_base = pci_alloc_consistent(he_dev->pci_dev,
CONFIG_RBPS_SIZE * sizeof(struct he_rbp), &he_dev->rbps_phys);
if (he_dev->rbps_base == NULL) {
- hprintk("failed to alloc rbps\n");
- return -ENOMEM;
+ hprintk("failed to alloc rbps_base\n");
+ goto out_destroy_rbps_pool;
}
memset(he_dev->rbps_base, 0, CONFIG_RBPS_SIZE * sizeof(struct he_rbp));
he_dev->rbps_virt = kmalloc(CONFIG_RBPS_SIZE * sizeof(struct he_virt), GFP_KERNEL);
+ if (he_dev->rbps_virt == NULL) {
+ hprintk("failed to alloc rbps_virt\n");
+ goto out_free_rbps_base;
+ }
for (i = 0; i < CONFIG_RBPS_SIZE; ++i) {
dma_addr_t dma_handle;
@@ -802,7 +806,7 @@
cpuaddr = pci_pool_alloc(he_dev->rbps_pool, GFP_KERNEL|GFP_DMA, &dma_handle);
if (cpuaddr == NULL)
- return -ENOMEM;
+ goto out_free_rbps_virt;
he_dev->rbps_virt[i].virt = cpuaddr;
he_dev->rbps_base[i].status = RBP_LOANED | RBP_SMALLBUF | (i << RBP_INDEX_OFF);
@@ -827,17 +831,21 @@
CONFIG_RBPL_BUFSIZE, 8, 0);
if (he_dev->rbpl_pool == NULL) {
hprintk("unable to create rbpl pool\n");
- return -ENOMEM;
+ goto out_free_rbps_virt;
}
he_dev->rbpl_base = pci_alloc_consistent(he_dev->pci_dev,
CONFIG_RBPL_SIZE * sizeof(struct he_rbp), &he_dev->rbpl_phys);
if (he_dev->rbpl_base == NULL) {
- hprintk("failed to alloc rbpl\n");
- return -ENOMEM;
+ hprintk("failed to alloc rbpl_base\n");
+ goto out_destroy_rbpl_pool;
}
memset(he_dev->rbpl_base, 0, CONFIG_RBPL_SIZE * sizeof(struct he_rbp));
he_dev->rbpl_virt = kmalloc(CONFIG_RBPL_SIZE * sizeof(struct he_virt), GFP_KERNEL);
+ if (he_dev->rbpl_virt == NULL) {
+ hprintk("failed to alloc rbpl_virt\n");
+ goto out_free_rbpl_base;
+ }
for (i = 0; i < CONFIG_RBPL_SIZE; ++i) {
dma_addr_t dma_handle;
@@ -845,7 +853,7 @@
cpuaddr = pci_pool_alloc(he_dev->rbpl_pool, GFP_KERNEL|GFP_DMA, &dma_handle);
if (cpuaddr == NULL)
- return -ENOMEM;
+ goto out_free_rbpl_virt;
he_dev->rbpl_virt[i].virt = cpuaddr;
he_dev->rbpl_base[i].status = RBP_LOANED | (i << RBP_INDEX_OFF);
@@ -870,7 +878,7 @@
CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), &he_dev->rbrq_phys);
if (he_dev->rbrq_base == NULL) {
hprintk("failed to allocate rbrq\n");
- return -ENOMEM;
+ goto out_free_rbpl_virt;
}
memset(he_dev->rbrq_base, 0, CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq));
@@ -894,7 +902,7 @@
CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), &he_dev->tbrq_phys);
if (he_dev->tbrq_base == NULL) {
hprintk("failed to allocate tbrq\n");
- return -ENOMEM;
+ goto out_free_rbpq_base;
}
memset(he_dev->tbrq_base, 0, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq));
@@ -906,6 +914,39 @@
he_writel(he_dev, CONFIG_TBRQ_THRESH, G0_TBRQ_THRESH + (group * 16));
return 0;
+
+out_free_rbpq_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBRQ_SIZE *
+ sizeof(struct he_rbrq), he_dev->rbrq_base,
+ he_dev->rbrq_phys);
+ i = CONFIG_RBPL_SIZE;
+out_free_rbpl_virt:
+ while (--i)
+ pci_pool_free(he_dev->rbps_pool, he_dev->rbpl_virt[i].virt,
+ he_dev->rbps_base[i].phys);
+ kfree(he_dev->rbpl_virt);
+
+out_free_rbpl_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBPL_SIZE *
+ sizeof(struct he_rbp), he_dev->rbpl_base,
+ he_dev->rbpl_phys);
+out_destroy_rbpl_pool:
+ pci_pool_destroy(he_dev->rbpl_pool);
+
+ i = CONFIG_RBPL_SIZE;
+out_free_rbps_virt:
+ while (--i)
+ pci_pool_free(he_dev->rbpl_pool, he_dev->rbps_virt[i].virt,
+ he_dev->rbpl_base[i].phys);
+ kfree(he_dev->rbps_virt);
+
+out_free_rbps_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBPS_SIZE *
+ sizeof(struct he_rbp), he_dev->rbps_base,
+ he_dev->rbps_phys);
+out_destroy_rbps_pool:
+ pci_pool_destroy(he_dev->rbps_pool);
+ return -ENOMEM;
}
static int __devinit
diff --git a/drivers/atm/solos-attrlist.c b/drivers/atm/solos-attrlist.c
index efa2808..1a9332e 100644
--- a/drivers/atm/solos-attrlist.c
+++ b/drivers/atm/solos-attrlist.c
@@ -25,6 +25,10 @@
SOLOS_ATTR_RO(RSUnCorrectedErrorsUp)
SOLOS_ATTR_RO(InterleaveRDn)
SOLOS_ATTR_RO(InterleaveRUp)
+SOLOS_ATTR_RO(BisRDn)
+SOLOS_ATTR_RO(BisRUp)
+SOLOS_ATTR_RO(INPdown)
+SOLOS_ATTR_RO(INPup)
SOLOS_ATTR_RO(ShowtimeStart)
SOLOS_ATTR_RO(ATURVendor)
SOLOS_ATTR_RO(ATUCCountry)
@@ -62,6 +66,13 @@
SOLOS_ATTR_RW(LineMode)
SOLOS_ATTR_RW(Profile)
SOLOS_ATTR_RW(DetectNoise)
+SOLOS_ATTR_RW(BisAForceSNRMarginDn)
+SOLOS_ATTR_RW(BisMForceSNRMarginDn)
+SOLOS_ATTR_RW(BisAMaxMargin)
+SOLOS_ATTR_RW(BisMMaxMargin)
+SOLOS_ATTR_RW(AnnexAForceSNRMarginDn)
+SOLOS_ATTR_RW(AnnexAMaxMargin)
+SOLOS_ATTR_RW(AnnexMMaxMargin)
SOLOS_ATTR_RO(SupportedAnnexes)
SOLOS_ATTR_RO(Status)
SOLOS_ATTR_RO(TotalStart)
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 307321b..c5f5186 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -59,21 +59,29 @@
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
#define DATA_RAM_SIZE 32768
-#define BUF_SIZE 4096
+#define BUF_SIZE 2048
+#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
#define FPGA_PAGE 528 /* FPGA flash page size*/
#define SOLOS_PAGE 512 /* Solos flash page size*/
#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
-#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
-#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
#define RX_DMA_SIZE 2048
+#define FPGA_VERSION(a,b) (((a) << 8) + (b))
+#define LEGACY_BUFFERS 2
+#define DMA_SUPPORTED 4
+
static int reset = 0;
static int atmdebug = 0;
static int firmware_upgrade = 0;
static int fpga_upgrade = 0;
+static int db_firmware_upgrade = 0;
+static int db_fpga_upgrade = 0;
struct pkt_hdr {
__le16 size;
@@ -116,6 +124,8 @@
wait_queue_head_t param_wq;
wait_queue_head_t fw_wq;
int using_dma;
+ int fpga_version;
+ int buffer_size;
};
@@ -136,10 +146,14 @@
MODULE_PARM_DESC(atmdebug, "Print ATM data");
MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
+MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
+MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
module_param(reset, int, 0444);
module_param(atmdebug, int, 0644);
module_param(firmware_upgrade, int, 0444);
module_param(fpga_upgrade, int, 0444);
+module_param(db_firmware_upgrade, int, 0444);
+module_param(db_fpga_upgrade, int, 0444);
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
struct atm_vcc *vcc);
@@ -517,10 +531,32 @@
if (chip == 0) {
fw_name = "solos-FPGA.bin";
blocksize = FPGA_BLOCK;
- } else {
+ }
+
+ if (chip == 1) {
fw_name = "solos-Firmware.bin";
blocksize = SOLOS_BLOCK;
}
+
+ if (chip == 2){
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-db-FPGA.bin";
+ blocksize = FPGA_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+ return -EPERM;
+ }
+ }
+
+ if (chip == 3){
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-Firmware.bin";
+ blocksize = SOLOS_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+ return -EPERM;
+ }
+ }
if (request_firmware(&fw, fw_name, &card->dev->dev))
return -ENOENT;
@@ -536,8 +572,10 @@
data32 = ioread32(card->config_regs + FPGA_MODE);
/* Set mode to Chip Erase */
- dev_info(&card->dev->dev, "Set FPGA Flash mode to %s Chip Erase\n",
- chip?"Solos":"FPGA");
+ if(chip == 0 || chip == 2)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
+ if(chip == 1 || chip == 3)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
iowrite32((chip * 2), card->config_regs + FLASH_MODE);
@@ -557,7 +595,10 @@
/* Copy block to buffer, swapping each 16 bits */
for(i = 0; i < blocksize; i += 4) {
uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
- iowrite32(word, RX_BUF(card, 3) + i);
+ if(card->fpga_version > LEGACY_BUFFERS)
+ iowrite32(word, FLASH_BUF + i);
+ else
+ iowrite32(word, RX_BUF(card, 3) + i);
}
/* Specify block number and then trigger flash write */
@@ -630,6 +671,10 @@
memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
size = le16_to_cpu(header->size);
+ if (size > (card->buffer_size - sizeof(*header))){
+ dev_warn(&card->dev->dev, "Invalid buffer size\n");
+ continue;
+ }
skb = alloc_skb(size + 1, GFP_ATOMIC);
if (!skb) {
@@ -1094,12 +1139,18 @@
fpga_ver = (data32 & 0x0000FFFF);
major_ver = ((data32 & 0xFF000000) >> 24);
minor_ver = ((data32 & 0x00FF0000) >> 16);
+ card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
+ if (card->fpga_version > LEGACY_BUFFERS)
+ card->buffer_size = BUF_SIZE;
+ else
+ card->buffer_size = OLD_BUF_SIZE;
dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
major_ver, minor_ver, fpga_ver);
- if (0 && fpga_ver > 27)
+ if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
- else {
+ } else {
+ card->using_dma = 0;
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
@@ -1131,6 +1182,12 @@
if (firmware_upgrade)
flash_upgrade(card, 1);
+ if (db_fpga_upgrade)
+ flash_upgrade(card, 2);
+
+ if (db_firmware_upgrade)
+ flash_upgrade(card, 3);
+
err = atm_init(card);
if (err)
goto out_free_irq;
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 462d9f59..83a1922 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -87,7 +87,7 @@
/* These identify the driver base version and may not be removed. */
static char version[] =
-KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
+DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ed5741b..2bea67c 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1875,7 +1875,7 @@
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35
+ depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index be2c6cf..1372e9a9 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -2296,7 +2296,7 @@
u32 ctrl;
u32 mac_ctrl_data;
u32 master_ctrl_data;
- u32 wol_ctrl_data;
+ u32 wol_ctrl_data = 0;
u16 mii_bmsr_data;
u16 save_autoneg_advertised;
u16 mii_intr_status_data;
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 0900743..df32c10 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -75,6 +75,13 @@
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
+config CAN_EMS_USB
+ tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+ depends on USB && CAN_DEV
+ ---help---
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI && CAN_SJA1000
@@ -82,6 +89,12 @@
This driver is for the the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
+config CAN_AT91
+ tristate "Atmel AT91 onchip CAN controller"
+ depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+ ---help---
+ This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 523a941..0dea627 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -7,6 +7,9 @@
obj-$(CONFIG_CAN_DEV) += can-dev.o
can-dev-y := dev.o
+obj-y += usb/
+
obj-$(CONFIG_CAN_SJA1000) += sja1000/
+obj-$(CONFIG_CAN_AT91) += at91_can.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
new file mode 100644
index 0000000..c3f75ba
--- /dev/null
+++ b/drivers/net/can/usb/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Linux Controller Area Network USB drivers.
+#
+
+obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
new file mode 100644
index 0000000..9012e0a
--- /dev/null
+++ b/drivers/net/can/usb/ems_usb.c
@@ -0,0 +1,1155 @@
+/*
+ * CAN driver for EMS Dr. Thomas Wuensche CPC-USB/ARM7
+ *
+ * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+MODULE_AUTHOR("Sebastian Haas <haas@ems-wuensche.com>");
+MODULE_DESCRIPTION("CAN driver for EMS Dr. Thomas Wuensche CAN/USB interfaces");
+MODULE_LICENSE("GPL v2");
+
+/* Control-Values for CPC_Control() Command Subject Selection */
+#define CONTR_CAN_MESSAGE 0x04
+#define CONTR_CAN_STATE 0x0C
+#define CONTR_BUS_ERROR 0x1C
+
+/* Control Command Actions */
+#define CONTR_CONT_OFF 0
+#define CONTR_CONT_ON 1
+#define CONTR_ONCE 2
+
+/* Messages from CPC to PC */
+#define CPC_MSG_TYPE_CAN_FRAME 1 /* CAN data frame */
+#define CPC_MSG_TYPE_RTR_FRAME 8 /* CAN remote frame */
+#define CPC_MSG_TYPE_CAN_PARAMS 12 /* Actual CAN parameters */
+#define CPC_MSG_TYPE_CAN_STATE 14 /* CAN state message */
+#define CPC_MSG_TYPE_EXT_CAN_FRAME 16 /* Extended CAN data frame */
+#define CPC_MSG_TYPE_EXT_RTR_FRAME 17 /* Extended remote frame */
+#define CPC_MSG_TYPE_CONTROL 19 /* change interface behavior */
+#define CPC_MSG_TYPE_CONFIRM 20 /* command processed confirmation */
+#define CPC_MSG_TYPE_OVERRUN 21 /* overrun events */
+#define CPC_MSG_TYPE_CAN_FRAME_ERROR 23 /* detected bus errors */
+#define CPC_MSG_TYPE_ERR_COUNTER 25 /* RX/TX error counter */
+
+/* Messages from the PC to the CPC interface */
+#define CPC_CMD_TYPE_CAN_FRAME 1 /* CAN data frame */
+#define CPC_CMD_TYPE_CONTROL 3 /* control of interface behavior */
+#define CPC_CMD_TYPE_CAN_PARAMS 6 /* set CAN parameters */
+#define CPC_CMD_TYPE_RTR_FRAME 13 /* CAN remote frame */
+#define CPC_CMD_TYPE_CAN_STATE 14 /* CAN state message */
+#define CPC_CMD_TYPE_EXT_CAN_FRAME 15 /* Extended CAN data frame */
+#define CPC_CMD_TYPE_EXT_RTR_FRAME 16 /* Extended CAN remote frame */
+#define CPC_CMD_TYPE_CAN_EXIT 200 /* exit the CAN */
+
+#define CPC_CMD_TYPE_INQ_ERR_COUNTER 25 /* request the CAN error counters */
+#define CPC_CMD_TYPE_CLEAR_MSG_QUEUE 8 /* clear CPC_MSG queue */
+#define CPC_CMD_TYPE_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
+
+#define CPC_CC_TYPE_SJA1000 2 /* Philips basic CAN controller */
+
+#define CPC_CAN_ECODE_ERRFRAME 0x01 /* Ecode type */
+
+/* Overrun types */
+#define CPC_OVR_EVENT_CAN 0x01
+#define CPC_OVR_EVENT_CANSTATE 0x02
+#define CPC_OVR_EVENT_BUSERROR 0x04
+
+/*
+ * If the CAN controller lost a message we indicate it with the highest bit
+ * set in the count field.
+ */
+#define CPC_OVR_HW 0x80
+
+/* Size of the "struct ems_cpc_msg" without the union */
+#define CPC_MSG_HEADER_LEN 11
+#define CPC_CAN_MSG_MIN_SIZE 5
+
+/* Define these values to match your devices */
+#define USB_CPCUSB_VENDOR_ID 0x12D6
+
+#define USB_CPCUSB_ARM7_PRODUCT_ID 0x0444
+
+/* Mode register NXP LPC2119/SJA1000 CAN Controller */
+#define SJA1000_MOD_NORMAL 0x00
+#define SJA1000_MOD_RM 0x01
+
+/* ECC register NXP LPC2119/SJA1000 CAN Controller */
+#define SJA1000_ECC_SEG 0x1F
+#define SJA1000_ECC_DIR 0x20
+#define SJA1000_ECC_ERR 0x06
+#define SJA1000_ECC_BIT 0x00
+#define SJA1000_ECC_FORM 0x40
+#define SJA1000_ECC_STUFF 0x80
+#define SJA1000_ECC_MASK 0xc0
+
+/* Status register content */
+#define SJA1000_SR_BS 0x80
+#define SJA1000_SR_ES 0x40
+
+#define SJA1000_DEFAULT_OUTPUT_CONTROL 0xDA
+
+/*
+ * The device actually uses a 16MHz clock to generate the CAN clock
+ * but it expects SJA1000 bit settings based on 8MHz (is internally
+ * converted).
+ */
+#define EMS_USB_ARM7_CLOCK 8000000
+
+/*
+ * CAN-Message representation in a CPC_MSG. Message object type is
+ * CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or
+ * CPC_MSG_TYPE_EXT_CAN_FRAME or CPC_MSG_TYPE_EXT_RTR_FRAME.
+ */
+struct cpc_can_msg {
+ u32 id;
+ u8 length;
+ u8 msg[8];
+};
+
+/* Representation of the CAN parameters for the SJA1000 controller */
+struct cpc_sja1000_params {
+ u8 mode;
+ u8 acc_code0;
+ u8 acc_code1;
+ u8 acc_code2;
+ u8 acc_code3;
+ u8 acc_mask0;
+ u8 acc_mask1;
+ u8 acc_mask2;
+ u8 acc_mask3;
+ u8 btr0;
+ u8 btr1;
+ u8 outp_contr;
+};
+
+/* CAN params message representation */
+struct cpc_can_params {
+ u8 cc_type;
+
+ /* Will support M16C CAN controller in the future */
+ union {
+ struct cpc_sja1000_params sja1000;
+ } cc_params;
+};
+
+/* Structure for confirmed message handling */
+struct cpc_confirm {
+ u8 error; /* error code */
+};
+
+/* Structure for overrun conditions */
+struct cpc_overrun {
+ u8 event;
+ u8 count;
+};
+
+/* SJA1000 CAN errors (compatible to NXP LPC2119) */
+struct cpc_sja1000_can_error {
+ u8 ecc;
+ u8 rxerr;
+ u8 txerr;
+};
+
+/* structure for CAN error conditions */
+struct cpc_can_error {
+ u8 ecode;
+
+ struct {
+ u8 cc_type;
+
+ /* Other controllers may also provide error code capture regs */
+ union {
+ struct cpc_sja1000_can_error sja1000;
+ } regs;
+ } cc;
+};
+
+/*
+ * Structure containing RX/TX error counter. This structure is used to request
+ * the values of the CAN controllers TX and RX error counter.
+ */
+struct cpc_can_err_counter {
+ u8 rx;
+ u8 tx;
+};
+
+/* Main message type used between library and application */
+struct __attribute__ ((packed)) ems_cpc_msg {
+ u8 type; /* type of message */
+ u8 length; /* length of data within union 'msg' */
+ u8 msgid; /* confirmation handle */
+ u32 ts_sec; /* timestamp in seconds */
+ u32 ts_nsec; /* timestamp in nano seconds */
+
+ union {
+ u8 generic[64];
+ struct cpc_can_msg can_msg;
+ struct cpc_can_params can_params;
+ struct cpc_confirm confirmation;
+ struct cpc_overrun overrun;
+ struct cpc_can_error error;
+ struct cpc_can_err_counter err_counter;
+ u8 can_state;
+ } msg;
+};
+
+/*
+ * Table of devices that work with this driver
+ * NOTE: This driver supports only CPC-USB/ARM7 (LPC2119) yet.
+ */
+static struct usb_device_id ems_usb_table[] = {
+ {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_ARM7_PRODUCT_ID)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ems_usb_table);
+
+#define RX_BUFFER_SIZE 64
+#define CPC_HEADER_SIZE 4
+#define INTR_IN_BUFFER_SIZE 4
+
+#define MAX_RX_URBS 10
+#define MAX_TX_URBS CAN_ECHO_SKB_MAX
+
+struct ems_usb;
+
+struct ems_tx_urb_context {
+ struct ems_usb *dev;
+
+ u32 echo_index;
+ u8 dlc;
+};
+
+struct ems_usb {
+ struct can_priv can; /* must be the first member */
+ int open_time;
+
+ struct sk_buff *echo_skb[MAX_TX_URBS];
+
+ struct usb_device *udev;
+ struct net_device *netdev;
+
+ atomic_t active_tx_urbs;
+ struct usb_anchor tx_submitted;
+ struct ems_tx_urb_context tx_contexts[MAX_TX_URBS];
+
+ struct usb_anchor rx_submitted;
+
+ struct urb *intr_urb;
+
+ u8 *tx_msg_buffer;
+
+ u8 *intr_in_buffer;
+ unsigned int free_slots; /* remember number of available slots */
+
+ struct ems_cpc_msg active_params; /* active controller parameters */
+};
+
+static void ems_usb_read_interrupt_callback(struct urb *urb)
+{
+ struct ems_usb *dev = urb->context;
+ struct net_device *netdev = dev->netdev;
+ int err;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0:
+ dev->free_slots = dev->intr_in_buffer[1];
+ break;
+
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ dev_info(netdev->dev.parent, "Rx interrupt aborted %d\n",
+ urb->status);
+ break;
+ }
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (err == -ENODEV)
+ netif_device_detach(netdev);
+ else if (err)
+ dev_err(netdev->dev.parent,
+ "failed resubmitting intr urb: %d\n", err);
+
+ return;
+}
+
+static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ int i;
+ struct net_device_stats *stats = &dev->netdev->stats;
+
+ skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ if (skb == NULL)
+ return;
+
+ skb->protocol = htons(ETH_P_CAN);
+
+ cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+
+ cf->can_id = msg->msg.can_msg.id;
+ cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
+
+ if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
+ || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME)
+ cf->can_id |= CAN_EFF_FLAG;
+
+ if (msg->type == CPC_MSG_TYPE_RTR_FRAME
+ || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) {
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ for (i = 0; i < cf->can_dlc; i++)
+ cf->data[i] = msg->msg.can_msg.msg[i];
+ }
+
+ netif_rx(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ struct net_device_stats *stats = &dev->netdev->stats;
+
+ skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ if (skb == NULL)
+ return;
+
+ skb->protocol = htons(ETH_P_CAN);
+
+ cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+ memset(cf, 0, sizeof(struct can_frame));
+
+ cf->can_id = CAN_ERR_FLAG;
+ cf->can_dlc = CAN_ERR_DLC;
+
+ if (msg->type == CPC_MSG_TYPE_CAN_STATE) {
+ u8 state = msg->msg.can_state;
+
+ if (state & SJA1000_SR_BS) {
+ dev->can.state = CAN_STATE_BUS_OFF;
+ cf->can_id |= CAN_ERR_BUSOFF;
+
+ can_bus_off(dev->netdev);
+ } else if (state & SJA1000_SR_ES) {
+ dev->can.state = CAN_STATE_ERROR_WARNING;
+ dev->can.can_stats.error_warning++;
+ } else {
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+ dev->can.can_stats.error_passive++;
+ }
+ } else if (msg->type == CPC_MSG_TYPE_CAN_FRAME_ERROR) {
+ u8 ecc = msg->msg.error.cc.regs.sja1000.ecc;
+ u8 txerr = msg->msg.error.cc.regs.sja1000.txerr;
+ u8 rxerr = msg->msg.error.cc.regs.sja1000.rxerr;
+
+ /* bus error interrupt */
+ dev->can.can_stats.bus_error++;
+ stats->rx_errors++;
+
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+ switch (ecc & SJA1000_ECC_MASK) {
+ case SJA1000_ECC_BIT:
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ break;
+ case SJA1000_ECC_FORM:
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ break;
+ case SJA1000_ECC_STUFF:
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ break;
+ default:
+ cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+ cf->data[3] = ecc & SJA1000_ECC_SEG;
+ break;
+ }
+
+ /* Error occured during transmission? */
+ if ((ecc & SJA1000_ECC_DIR) == 0)
+ cf->data[2] |= CAN_ERR_PROT_TX;
+
+ if (dev->can.state == CAN_STATE_ERROR_WARNING ||
+ dev->can.state == CAN_STATE_ERROR_PASSIVE) {
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_PASSIVE : CAN_ERR_CRTL_RX_PASSIVE;
+ }
+ } else if (msg->type == CPC_MSG_TYPE_OVERRUN) {
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+ }
+
+ netif_rx(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void ems_usb_read_bulk_callback(struct urb *urb)
+{
+ struct ems_usb *dev = urb->context;
+ struct net_device *netdev;
+ int retval;
+
+ netdev = dev->netdev;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+
+ case -ENOENT:
+ return;
+
+ default:
+ dev_info(netdev->dev.parent, "Rx URB aborted (%d)\n",
+ urb->status);
+ goto resubmit_urb;
+ }
+
+ if (urb->actual_length > CPC_HEADER_SIZE) {
+ struct ems_cpc_msg *msg;
+ u8 *ibuf = urb->transfer_buffer;
+ u8 msg_count, again, start;
+
+ msg_count = ibuf[0] & ~0x80;
+ again = ibuf[0] & 0x80;
+
+ start = CPC_HEADER_SIZE;
+
+ while (msg_count) {
+ msg = (struct ems_cpc_msg *)&ibuf[start];
+
+ switch (msg->type) {
+ case CPC_MSG_TYPE_CAN_STATE:
+ /* Process CAN state changes */
+ ems_usb_rx_err(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_CAN_FRAME:
+ case CPC_MSG_TYPE_EXT_CAN_FRAME:
+ case CPC_MSG_TYPE_RTR_FRAME:
+ case CPC_MSG_TYPE_EXT_RTR_FRAME:
+ ems_usb_rx_can_msg(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_CAN_FRAME_ERROR:
+ /* Process errorframe */
+ ems_usb_rx_err(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_OVERRUN:
+ /* Message lost while receiving */
+ ems_usb_rx_err(dev, msg);
+ break;
+ }
+
+ start += CPC_MSG_HEADER_LEN + msg->length;
+ msg_count--;
+
+ if (start > urb->transfer_buffer_length) {
+ dev_err(netdev->dev.parent, "format error\n");
+ break;
+ }
+ }
+ }
+
+resubmit_urb:
+ usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
+ urb->transfer_buffer, RX_BUFFER_SIZE,
+ ems_usb_read_bulk_callback, dev);
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (retval == -ENODEV)
+ netif_device_detach(netdev);
+ else if (retval)
+ dev_err(netdev->dev.parent,
+ "failed resubmitting read bulk urb: %d\n", retval);
+
+ return;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void ems_usb_write_bulk_callback(struct urb *urb)
+{
+ struct ems_tx_urb_context *context = urb->context;
+ struct ems_usb *dev;
+ struct net_device *netdev;
+
+ BUG_ON(!context);
+
+ dev = context->dev;
+ netdev = dev->netdev;
+
+ /* free up our allocated buffer */
+ usb_buffer_free(urb->dev, urb->transfer_buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (!netif_device_present(netdev))
+ return;
+
+ if (urb->status)
+ dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n",
+ urb->status);
+
+ netdev->trans_start = jiffies;
+
+ /* transmission complete interrupt */
+ netdev->stats.tx_packets++;
+ netdev->stats.tx_bytes += context->dlc;
+
+ can_get_echo_skb(netdev, context->echo_index);
+
+ /* Release context */
+ context->echo_index = MAX_TX_URBS;
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+}
+
+/*
+ * Send the given CPC command synchronously
+ */
+static int ems_usb_command_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ int actual_length;
+
+ /* Copy payload */
+ memcpy(&dev->tx_msg_buffer[CPC_HEADER_SIZE], msg,
+ msg->length + CPC_MSG_HEADER_LEN);
+
+ /* Clear header */
+ memset(&dev->tx_msg_buffer[0], 0, CPC_HEADER_SIZE);
+
+ return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2),
+ &dev->tx_msg_buffer[0],
+ msg->length + CPC_MSG_HEADER_LEN + CPC_HEADER_SIZE,
+ &actual_length, 1000);
+}
+
+/*
+ * Change CAN controllers' mode register
+ */
+static int ems_usb_write_mode(struct ems_usb *dev, u8 mode)
+{
+ dev->active_params.msg.can_params.cc_params.sja1000.mode = mode;
+
+ return ems_usb_command_msg(dev, &dev->active_params);
+}
+
+/*
+ * Send a CPC_Control command to change behaviour when interface receives a CAN
+ * message, bus error or CAN state changed notifications.
+ */
+static int ems_usb_control_cmd(struct ems_usb *dev, u8 val)
+{
+ struct ems_cpc_msg cmd;
+
+ cmd.type = CPC_CMD_TYPE_CONTROL;
+ cmd.length = CPC_MSG_HEADER_LEN + 1;
+
+ cmd.msgid = 0;
+
+ cmd.msg.generic[0] = val;
+
+ return ems_usb_command_msg(dev, &cmd);
+}
+
+/*
+ * Start interface
+ */
+static int ems_usb_start(struct ems_usb *dev)
+{
+ struct net_device *netdev = dev->netdev;
+ int err, i;
+
+ dev->intr_in_buffer[0] = 0;
+ dev->free_slots = 15; /* initial size */
+
+ for (i = 0; i < MAX_RX_URBS; i++) {
+ struct urb *urb = NULL;
+ u8 *buf = NULL;
+
+ /* create a URB, and a buffer for it */
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(netdev->dev.parent,
+ "No memory left for URBs\n");
+ return -ENOMEM;
+ }
+
+ buf = usb_buffer_alloc(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buf) {
+ dev_err(netdev->dev.parent,
+ "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
+ buf, RX_BUFFER_SIZE,
+ ems_usb_read_bulk_callback, dev);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usb_anchor_urb(urb, &dev->rx_submitted);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, RX_BUFFER_SIZE, buf,
+ urb->transfer_dma);
+ break;
+ }
+
+ /* Drop reference, USB core will take care of freeing it */
+ usb_free_urb(urb);
+ }
+
+ /* Did we submit any URBs */
+ if (i == 0) {
+ dev_warn(netdev->dev.parent, "couldn't setup read URBs\n");
+ return err;
+ }
+
+ /* Warn if we've couldn't transmit all the URBs */
+ if (i < MAX_RX_URBS)
+ dev_warn(netdev->dev.parent, "rx performance may be slow\n");
+
+ /* Setup and start interrupt URB */
+ usb_fill_int_urb(dev->intr_urb, dev->udev,
+ usb_rcvintpipe(dev->udev, 1),
+ dev->intr_in_buffer,
+ INTR_IN_BUFFER_SIZE,
+ ems_usb_read_interrupt_callback, dev, 1);
+
+ err = usb_submit_urb(dev->intr_urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "intr URB submit failed: %d\n",
+ err);
+
+ return err;
+ }
+
+ /* CPC-USB will transfer received message to host */
+ err = ems_usb_control_cmd(dev, CONTR_CAN_MESSAGE | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ /* CPC-USB will transfer CAN state changes to host */
+ err = ems_usb_control_cmd(dev, CONTR_CAN_STATE | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ /* CPC-USB will transfer bus errors to host */
+ err = ems_usb_control_cmd(dev, CONTR_BUS_ERROR | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ err = ems_usb_write_mode(dev, SJA1000_MOD_NORMAL);
+ if (err)
+ goto failed;
+
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ return 0;
+
+failed:
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "couldn't submit control: %d\n", err);
+
+ return err;
+}
+
+static void unlink_all_urbs(struct ems_usb *dev)
+{
+ int i;
+
+ usb_unlink_urb(dev->intr_urb);
+
+ usb_kill_anchored_urbs(&dev->rx_submitted);
+
+ usb_kill_anchored_urbs(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = MAX_TX_URBS;
+}
+
+static int ems_usb_open(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ int err;
+
+ err = ems_usb_write_mode(dev, SJA1000_MOD_RM);
+ if (err)
+ return err;
+
+ /* common open */
+ err = open_candev(netdev);
+ if (err)
+ return err;
+
+ /* finally start device */
+ err = ems_usb_start(dev);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "couldn't start device: %d\n",
+ err);
+
+ close_candev(netdev);
+
+ return err;
+ }
+
+ dev->open_time = jiffies;
+
+ netif_start_queue(netdev);
+
+ return 0;
+}
+
+static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ struct ems_tx_urb_context *context = NULL;
+ struct net_device_stats *stats = &netdev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ struct ems_cpc_msg *msg;
+ struct urb *urb;
+ u8 *buf;
+ int i, err;
+ size_t size = CPC_HEADER_SIZE + CPC_MSG_HEADER_LEN
+ + sizeof(struct cpc_can_msg);
+
+ /* create a URB, and a buffer for it, and copy the data to the URB */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(netdev->dev.parent, "No memory left for URBs\n");
+ goto nomem;
+ }
+
+ buf = usb_buffer_alloc(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
+ if (!buf) {
+ dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ goto nomem;
+ }
+
+ msg = (struct ems_cpc_msg *)&buf[CPC_HEADER_SIZE];
+
+ msg->msg.can_msg.id = cf->can_id & CAN_ERR_MASK;
+ msg->msg.can_msg.length = cf->can_dlc;
+
+ if (cf->can_id & CAN_RTR_FLAG) {
+ msg->type = cf->can_id & CAN_EFF_FLAG ?
+ CPC_CMD_TYPE_EXT_RTR_FRAME : CPC_CMD_TYPE_RTR_FRAME;
+
+ msg->length = CPC_CAN_MSG_MIN_SIZE;
+ } else {
+ msg->type = cf->can_id & CAN_EFF_FLAG ?
+ CPC_CMD_TYPE_EXT_CAN_FRAME : CPC_CMD_TYPE_CAN_FRAME;
+
+ for (i = 0; i < cf->can_dlc; i++)
+ msg->msg.can_msg.msg[i] = cf->data[i];
+
+ msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc;
+ }
+
+ for (i = 0; i < MAX_TX_URBS; i++) {
+ if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) {
+ context = &dev->tx_contexts[i];
+ break;
+ }
+ }
+
+ /*
+ * May never happen! When this happens we'd more URBs in flight as
+ * allowed (MAX_TX_URBS).
+ */
+ if (!context) {
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+
+ dev_warn(netdev->dev.parent, "couldn't find free context\n");
+
+ return NETDEV_TX_BUSY;
+ }
+
+ context->dev = dev;
+ context->echo_index = i;
+ context->dlc = cf->can_dlc;
+
+ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
+ size, ems_usb_write_bulk_callback, context);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usb_anchor_urb(urb, &dev->tx_submitted);
+
+ can_put_echo_skb(skb, netdev, context->echo_index);
+
+ atomic_inc(&dev->active_tx_urbs);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (unlikely(err)) {
+ can_free_echo_skb(netdev, context->echo_index);
+
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+ dev_kfree_skb(skb);
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (err == -ENODEV) {
+ netif_device_detach(netdev);
+ } else {
+ dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err);
+
+ stats->tx_dropped++;
+ }
+ } else {
+ netdev->trans_start = jiffies;
+
+ /* Slow down tx path */
+ if (atomic_read(&dev->active_tx_urbs) >= MAX_TX_URBS ||
+ dev->free_slots < 5) {
+ netif_stop_queue(netdev);
+ }
+ }
+
+ /*
+ * Release our reference to this URB, the USB core will eventually free
+ * it entirely.
+ */
+ usb_free_urb(urb);
+
+ return NETDEV_TX_OK;
+
+nomem:
+ if (skb)
+ dev_kfree_skb(skb);
+
+ stats->tx_dropped++;
+
+ return NETDEV_TX_OK;
+}
+
+static int ems_usb_close(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+
+ /* Stop polling */
+ unlink_all_urbs(dev);
+
+ netif_stop_queue(netdev);
+
+ /* Set CAN controller to reset mode */
+ if (ems_usb_write_mode(dev, SJA1000_MOD_RM))
+ dev_warn(netdev->dev.parent, "couldn't stop device");
+
+ close_candev(netdev);
+
+ dev->open_time = 0;
+
+ return 0;
+}
+
+static const struct net_device_ops ems_usb_netdev_ops = {
+ .ndo_open = ems_usb_open,
+ .ndo_stop = ems_usb_close,
+ .ndo_start_xmit = ems_usb_start_xmit,
+};
+
+static struct can_bittiming_const ems_usb_bittiming_const = {
+ .name = "ems_usb",
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+static int ems_usb_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+
+ if (!dev->open_time)
+ return -EINVAL;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ if (ems_usb_write_mode(dev, SJA1000_MOD_NORMAL))
+ dev_warn(netdev->dev.parent, "couldn't start device");
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int ems_usb_set_bittiming(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ struct can_bittiming *bt = &dev->can.bittiming;
+ u8 btr0, btr1;
+
+ btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+ btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+ (((bt->phase_seg2 - 1) & 0x7) << 4);
+ if (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ btr1 |= 0x80;
+
+ dev_info(netdev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n",
+ btr0, btr1);
+
+ dev->active_params.msg.can_params.cc_params.sja1000.btr0 = btr0;
+ dev->active_params.msg.can_params.cc_params.sja1000.btr1 = btr1;
+
+ return ems_usb_command_msg(dev, &dev->active_params);
+}
+
+static void init_params_sja1000(struct ems_cpc_msg *msg)
+{
+ struct cpc_sja1000_params *sja1000 =
+ &msg->msg.can_params.cc_params.sja1000;
+
+ msg->type = CPC_CMD_TYPE_CAN_PARAMS;
+ msg->length = sizeof(struct cpc_can_params);
+ msg->msgid = 0;
+
+ msg->msg.can_params.cc_type = CPC_CC_TYPE_SJA1000;
+
+ /* Acceptance filter open */
+ sja1000->acc_code0 = 0x00;
+ sja1000->acc_code1 = 0x00;
+ sja1000->acc_code2 = 0x00;
+ sja1000->acc_code3 = 0x00;
+
+ /* Acceptance filter open */
+ sja1000->acc_mask0 = 0xFF;
+ sja1000->acc_mask1 = 0xFF;
+ sja1000->acc_mask2 = 0xFF;
+ sja1000->acc_mask3 = 0xFF;
+
+ sja1000->btr0 = 0;
+ sja1000->btr1 = 0;
+
+ sja1000->outp_contr = SJA1000_DEFAULT_OUTPUT_CONTROL;
+ sja1000->mode = SJA1000_MOD_RM;
+}
+
+/*
+ * probe function for new CPC-USB devices
+ */
+static int ems_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct net_device *netdev;
+ struct ems_usb *dev;
+ int i, err = -ENOMEM;
+
+ netdev = alloc_candev(sizeof(struct ems_usb));
+ if (!netdev) {
+ dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
+ return -ENOMEM;
+ }
+
+ dev = netdev_priv(netdev);
+
+ dev->udev = interface_to_usbdev(intf);
+ dev->netdev = netdev;
+
+ dev->can.state = CAN_STATE_STOPPED;
+ dev->can.clock.freq = EMS_USB_ARM7_CLOCK;
+ dev->can.bittiming_const = &ems_usb_bittiming_const;
+ dev->can.do_set_bittiming = ems_usb_set_bittiming;
+ dev->can.do_set_mode = ems_usb_set_mode;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ netdev->netdev_ops = &ems_usb_netdev_ops;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ init_usb_anchor(&dev->rx_submitted);
+
+ init_usb_anchor(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = MAX_TX_URBS;
+
+ dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->intr_urb) {
+ dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n");
+ goto cleanup_candev;
+ }
+
+ dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL);
+ if (!dev->intr_in_buffer) {
+ dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n");
+ goto cleanup_intr_urb;
+ }
+
+ dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE +
+ sizeof(struct ems_cpc_msg), GFP_KERNEL);
+ if (!dev->tx_msg_buffer) {
+ dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n");
+ goto cleanup_intr_in_buffer;
+ }
+
+ usb_set_intfdata(intf, dev);
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+
+ init_params_sja1000(&dev->active_params);
+
+ err = ems_usb_command_msg(dev, &dev->active_params);
+ if (err) {
+ dev_err(netdev->dev.parent,
+ "couldn't initialize controller: %d\n", err);
+ goto cleanup_tx_msg_buffer;
+ }
+
+ err = register_candev(netdev);
+ if (err) {
+ dev_err(netdev->dev.parent,
+ "couldn't register CAN device: %d\n", err);
+ goto cleanup_tx_msg_buffer;
+ }
+
+ return 0;
+
+cleanup_tx_msg_buffer:
+ kfree(dev->tx_msg_buffer);
+
+cleanup_intr_in_buffer:
+ kfree(dev->intr_in_buffer);
+
+cleanup_intr_urb:
+ usb_free_urb(dev->intr_urb);
+
+cleanup_candev:
+ free_candev(netdev);
+
+ return err;
+}
+
+/*
+ * called by the usb core when the device is removed from the system
+ */
+static void ems_usb_disconnect(struct usb_interface *intf)
+{
+ struct ems_usb *dev = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (dev) {
+ unregister_netdev(dev->netdev);
+ free_candev(dev->netdev);
+
+ unlink_all_urbs(dev);
+
+ usb_free_urb(dev->intr_urb);
+
+ kfree(dev->intr_in_buffer);
+ }
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver ems_usb_driver = {
+ .name = "ems_usb",
+ .probe = ems_usb_probe,
+ .disconnect = ems_usb_disconnect,
+ .id_table = ems_usb_table,
+};
+
+static int __init ems_usb_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "CPC-USB kernel driver loaded\n");
+
+ /* register this driver with the USB subsystem */
+ err = usb_register(&ems_usb_driver);
+
+ if (err) {
+ err("usb_register failed. Error number %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit ems_usb_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&ems_usb_driver);
+}
+
+module_init(ems_usb_init);
+module_exit(ems_usb_exit);
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index d45eacb..211c8e9 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -85,8 +85,6 @@
cp->uio_dev = iminor(inode);
- cnic_shutdown_bnx2_rx_ring(dev);
-
cnic_init_bnx2_tx_ring(dev);
cnic_init_bnx2_rx_ring(dev);
@@ -98,6 +96,8 @@
struct cnic_dev *dev = uinfo->priv;
struct cnic_local *cp = dev->cnic_priv;
+ cnic_shutdown_bnx2_rx_ring(dev);
+
cp->uio_dev = -1;
return 0;
}
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 3e3fab8..61f9da2 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -1109,7 +1109,7 @@
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id;
- char mdio_bus_id[BUS_ID_SIZE];
+ char mdio_bus_id[MII_BUS_ID_SIZE];
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
@@ -1118,7 +1118,7 @@
pdata = pdev->dev.platform_data;
if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
} else {
for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
@@ -1126,7 +1126,7 @@
continue;
if (!cpmac_mii->phy_map[phy_id])
continue;
- strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE);
+ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
break;
}
}
@@ -1167,7 +1167,7 @@
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 977c3d3..41bd7ae 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3083,7 +3083,6 @@
.ndo_poll_controller = ehea_netpoll,
#endif
.ndo_get_stats = ehea_get_stats,
- .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = ehea_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = ehea_set_multicast_list,
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index a0231cd..7d76bb0 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -286,41 +286,6 @@
}
/**
- * igb_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- *
- * Updates entire Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count)
-{
- u32 hash_value, hash_bit, hash_reg;
- int i;
-
- /* clear mta_shadow */
- memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
- /* update mta_shadow from mc_addr_list */
- for (i = 0; (u32) i < mc_addr_count; i++) {
- hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
- hash_bit = hash_value & 0x1F;
-
- hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
- mc_addr_list += (ETH_ALEN);
- }
-
- /* replace the entire MTA table */
- for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
- array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
- wrfl();
-}
-
-/**
* igb_hash_mc_addr - Generate a multicast hash value
* @hw: pointer to the HW structure
* @mc_addr: pointer to a multicast address
@@ -329,7 +294,7 @@
* the multicast filter table array address and new table value. See
* igb_mta_set()
**/
-u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
{
u32 hash_value, hash_mask;
u8 bit_shift = 0;
@@ -392,6 +357,41 @@
}
/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
+/**
* igb_clear_hw_cntrs_base - Clear base hardware counters
* @hw: pointer to the HW structure
*
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
index 7518af8..bca17d88 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/igb/e1000_mac.h
@@ -88,6 +88,5 @@
#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
-extern u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
#endif
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index dd688d4..385be60 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -267,7 +267,8 @@
enum ixgbe_fc_mode last_lfc_mode;
/* Interrupt Throttle Rate */
- u32 itr_setting;
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
u16 eitr_low;
u16 eitr_high;
@@ -351,7 +352,8 @@
struct ixgbe_hw_stats stats;
/* Interrupt Throttle Rate */
- u32 eitr_param;
+ u32 rx_eitr_param;
+ u32 tx_eitr_param;
unsigned long state;
u64 tx_busy;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 026e94a..53b0a66 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1929,7 +1929,7 @@
ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit;
/* only valid if in constant ITR mode */
- switch (adapter->itr_setting) {
+ switch (adapter->rx_itr_setting) {
case 0:
/* throttling disabled */
ec->rx_coalesce_usecs = 0;
@@ -1940,9 +1940,25 @@
break;
default:
/* fixed interrupt rate mode */
- ec->rx_coalesce_usecs = 1000000/adapter->eitr_param;
+ ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
break;
}
+
+ /* only valid if in constant ITR mode */
+ switch (adapter->tx_itr_setting) {
+ case 0:
+ /* throttling disabled */
+ ec->tx_coalesce_usecs = 0;
+ break;
+ case 1:
+ /* dynamic ITR mode */
+ ec->tx_coalesce_usecs = 1;
+ break;
+ default:
+ ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
+ break;
+ }
+
return 0;
}
@@ -1953,6 +1969,14 @@
struct ixgbe_q_vector *q_vector;
int i;
+ /*
+ * don't accept tx specific changes if we've got mixed RxTx vectors
+ * test and jump out here if needed before changing the rx numbers
+ */
+ if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param &&
+ adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count)
+ return -EINVAL;
+
if (ec->tx_max_coalesced_frames_irq)
adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq;
@@ -1963,26 +1987,49 @@
return -EINVAL;
/* store the value in ints/second */
- adapter->eitr_param = 1000000/ec->rx_coalesce_usecs;
+ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
/* static value of interrupt rate */
- adapter->itr_setting = adapter->eitr_param;
+ adapter->rx_itr_setting = adapter->rx_eitr_param;
/* clear the lower bit as its used for dynamic state */
- adapter->itr_setting &= ~1;
+ adapter->rx_itr_setting &= ~1;
} else if (ec->rx_coalesce_usecs == 1) {
/* 1 means dynamic mode */
- adapter->eitr_param = 20000;
- adapter->itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
} else {
/*
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
- adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+ adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE;
else
- adapter->eitr_param = IXGBE_MAX_INT_RATE;
- adapter->itr_setting = 0;
+ adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->rx_itr_setting = 0;
+ }
+
+ if (ec->tx_coalesce_usecs > 1) {
+ /* check the limits */
+ if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+ (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+ return -EINVAL;
+
+ /* store the value in ints/second */
+ adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
+
+ /* static value of interrupt rate */
+ adapter->tx_itr_setting = adapter->tx_eitr_param;
+
+ /* clear the lower bit as its used for dynamic state */
+ adapter->tx_itr_setting &= ~1;
+ } else if (ec->tx_coalesce_usecs == 1) {
+ /* 1 means dynamic mode */
+ adapter->tx_eitr_param = 10000;
+ adapter->tx_itr_setting = 1;
+ } else {
+ adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->tx_itr_setting = 0;
}
/* MSI/MSIx Interrupt Mode */
@@ -1992,17 +2039,17 @@
for (i = 0; i < num_vectors; i++) {
q_vector = adapter->q_vector[i];
if (q_vector->txr_count && !q_vector->rxr_count)
- /* tx vector gets half the rate */
- q_vector->eitr = (adapter->eitr_param >> 1);
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
else
/* rx only or mixed */
- q_vector->eitr = adapter->eitr_param;
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
/* Legacy Interrupt Mode */
} else {
q_vector = adapter->q_vector[0];
- q_vector->eitr = adapter->eitr_param;
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 59ad959..c407bd9 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -926,12 +926,12 @@
r_idx + 1);
}
- /* if this is a tx only vector halve the interrupt rate */
if (q_vector->txr_count && !q_vector->rxr_count)
- q_vector->eitr = (adapter->eitr_param >> 1);
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
else if (q_vector->rxr_count)
- /* rx only */
- q_vector->eitr = adapter->eitr_param;
+ /* rx or mixed */
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
@@ -1359,7 +1359,7 @@
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter,
@@ -1420,7 +1420,7 @@
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter,
@@ -1458,10 +1458,10 @@
if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
work_done = budget;
- /* If all Rx work done, exit the polling mode */
+ /* If all Tx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->tx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
@@ -1848,7 +1848,7 @@
struct ixgbe_hw *hw = &adapter->hw;
IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
- EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param));
+ EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
ixgbe_set_ivar(adapter, 0, 0, 0);
ixgbe_set_ivar(adapter, 1, 0, 0);
@@ -1970,6 +1970,50 @@
}
/**
+ * ixgbe_configure_rscctl - enable RSC for the indicated ring
+ * @adapter: address of board private structure
+ * @index: index of ring to set
+ * @rx_buf_len: rx buffer length
+ **/
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index,
+ int rx_buf_len)
+{
+ struct ixgbe_ring *rx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int j;
+ u32 rscctrl;
+
+ rx_ring = &adapter->rx_ring[index];
+ j = rx_ring->reg_idx;
+ rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
+ rscctrl |= IXGBE_RSCCTL_RSCEN;
+ /*
+ * we must limit the number of descriptors so that the
+ * total size of max desc * buf_len is not greater
+ * than 65535
+ */
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+#if (MAX_SKB_FRAGS > 16)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+ } else {
+ if (rx_buf_len < IXGBE_RXBUFFER_4096)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+ else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+ else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
+}
+
+/**
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
* @adapter: board private structure
*
@@ -1990,7 +2034,6 @@
u32 fctrl, hlreg0;
u32 reta = 0, mrqc = 0;
u32 rdrxctl;
- u32 rscctrl;
int rx_buf_len;
/* Decide whether to use packet split mode or not */
@@ -2148,36 +2191,9 @@
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rx_ring = &adapter->rx_ring[i];
- j = rx_ring->reg_idx;
- rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
- rscctrl |= IXGBE_RSCCTL_RSCEN;
- /*
- * we must limit the number of descriptors so that the
- * total size of max desc * buf_len is not greater
- * than 65535
- */
- if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
-#if (MAX_SKB_FRAGS > 16)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-#elif (MAX_SKB_FRAGS > 8)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-#elif (MAX_SKB_FRAGS > 4)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
-#else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
-#endif
- } else {
- if (rx_buf_len < IXGBE_RXBUFFER_4096)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
- else if (rx_buf_len < IXGBE_RXBUFFER_8192)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
- else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
- }
- IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
- }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_configure_rscctl(adapter, i, rx_buf_len);
+
/* Disable RSC for ACK packets */
IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
(IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
@@ -2926,6 +2942,8 @@
ixgbe_napi_disable_all(adapter);
+ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+ del_timer_sync(&adapter->sfp_timer);
del_timer_sync(&adapter->watchdog_timer);
cancel_work_sync(&adapter->watchdog_task);
@@ -2989,7 +3007,7 @@
/* If budget not fully consumed, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr(adapter);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
@@ -3599,7 +3617,10 @@
if (!q_vector)
goto err_out;
q_vector->adapter = adapter;
- q_vector->eitr = adapter->eitr_param;
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ q_vector->eitr = adapter->tx_eitr_param;
+ else
+ q_vector->eitr = adapter->rx_eitr_param;
q_vector->v_idx = q_idx;
netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
adapter->q_vector[q_idx] = q_vector;
@@ -3868,8 +3889,10 @@
hw->fc.disable_fc_autoneg = false;
/* enable itr by default in dynamic mode */
- adapter->itr_setting = 1;
- adapter->eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->tx_itr_setting = 1;
+ adapter->tx_eitr_param = 10000;
/* set defaults for eitr in MegaBytes */
adapter->eitr_low = 10;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index f7bdde1..b5aa974 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1469,6 +1469,7 @@
}
netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+ return 0;
err_out_detach:
netxen_nic_detach(adapter);
@@ -1903,12 +1904,13 @@
netif_wake_queue(adapter->netdev);
- goto done;
+ clear_bit(__NX_RESETTING, &adapter->state);
} else {
+ clear_bit(__NX_RESETTING, &adapter->state);
if (!netxen_nic_reset_context(adapter)) {
adapter->netdev->trans_start = jiffies;
- goto done;
+ return;
}
/* context reset failed, fall through for fw reset */
@@ -1916,8 +1918,6 @@
request_reset:
adapter->need_fw_reset = 1;
-done:
- clear_bit(__NX_RESETTING, &adapter->state);
}
struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 97db1c7..474876c 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -340,12 +340,11 @@
base = &virt[hw_info[i].offset & (req.Size-1)];
if ((readb(base+0) == hw_info[i].a0) &&
(readb(base+2) == hw_info[i].a1) &&
- (readb(base+4) == hw_info[i].a2))
- break;
- }
- if (i < NR_INFO) {
- for (j = 0; j < 6; j++)
- dev->dev_addr[j] = readb(base + (j<<1));
+ (readb(base+4) == hw_info[i].a2)) {
+ for (j = 0; j < 6; j++)
+ dev->dev_addr[j] = readb(base + (j<<1));
+ break;
+ }
}
iounmap(virt);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 15140f9..ef11657 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1497,7 +1497,6 @@
if (ramsize > 0) {
u32 rxspace;
- hw->flags |= SKY2_HW_RAM_BUFFER;
pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
@@ -2926,6 +2925,9 @@
++hw->ports;
}
+ if (sky2_read8(hw, B2_E_0))
+ hw->flags |= SKY2_HW_RAM_BUFFER;
+
return 0;
}
diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index f1e5e45..bc74db0 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -1016,7 +1016,6 @@
.ndo_open = vnet_open,
.ndo_stop = vnet_close,
.ndo_set_multicast_list = vnet_set_rx_mode,
- .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = vnet_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = vnet_tx_timeout,
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index d3ee199..4fdfa2a 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -946,8 +946,6 @@
char *name;
unsigned long flags = 0;
- err = -EINVAL;
-
if (!capable(CAP_NET_ADMIN))
return -EPERM;
err = security_tun_dev_create();
@@ -964,7 +962,7 @@
flags |= TUN_TAP_DEV;
name = "tap%d";
} else
- goto failed;
+ return -EINVAL;
if (*ifr->ifr_name)
name = ifr->ifr_name;
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index e2a39b9..e391ef9 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -263,6 +263,7 @@
int timeout)
{
struct usb_ctrlrequest *dr;
+ int retval;
dbg("kaweth_control()");
@@ -278,18 +279,21 @@
return -ENOMEM;
}
- dr->bRequestType= requesttype;
+ dr->bRequestType = requesttype;
dr->bRequest = request;
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(size);
- return kaweth_internal_control_msg(kaweth->dev,
- pipe,
- dr,
- data,
- size,
- timeout);
+ retval = kaweth_internal_control_msg(kaweth->dev,
+ pipe,
+ dr,
+ data,
+ size,
+ timeout);
+
+ kfree(dr);
+ return retval;
}
/****************************************************************
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 938fb35..c6c9222 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1227,7 +1227,7 @@
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
.status = smsc95xx_status,
- .flags = FLAG_ETHER,
+ .flags = FLAG_ETHER | FLAG_SEND_ZLP,
};
static const struct usb_device_id products[] = {
@@ -1237,10 +1237,75 @@
.driver_info = (unsigned long) &smsc95xx_info,
},
{
+ /* SMSC9505 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9505),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E01),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
/* SMSC9512/9514 USB Hub & Ethernet Device */
USB_DEVICE(0x0424, 0xec00),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9500 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9900),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9901),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9902),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9903),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9904),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9905),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9906),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500 USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9907),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9908),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9909),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 24b36f7..ca5ca5a 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1049,7 +1049,7 @@
* NOTE: strictly conforming cdc-ether devices should expect
* the ZLP here, but ignore the one-byte packet.
*/
- if ((length % dev->maxpacket) == 0) {
+ if (!(info->flags & FLAG_SEND_ZLP) && (length % dev->maxpacket) == 0) {
urb->transfer_buffer_length++;
if (skb_tailroom(skb)) {
skb->data[skb->len] = 0;
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index e0138ac..e974e58 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -64,6 +64,8 @@
{ USB_DEVICE(0x0cf3, 0x9170) },
/* Atheros TG121N */
{ USB_DEVICE(0x0cf3, 0x1001) },
+ /* TP-Link TL-WN821N v2 */
+ { USB_DEVICE(0x0cf3, 0x1002) },
/* Cace Airpcap NX */
{ USB_DEVICE(0xcace, 0x0300) },
/* D-Link DWA 160A */
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 3234995..0ad6d0b 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -609,14 +609,24 @@
AR_PHY_CH1_EXT_CCA,
AR_PHY_CH2_EXT_CCA
};
- u8 chainmask;
+ u8 chainmask, rx_chain_status;
+ rx_chain_status = REG_READ(ah, AR_PHY_RX_CHAINMASK);
if (AR_SREV_9285(ah))
chainmask = 0x9;
- else if (AR_SREV_9280(ah) || AR_SREV_9287(ah))
- chainmask = 0x1B;
- else
- chainmask = 0x3F;
+ else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) {
+ if ((rx_chain_status & 0x2) || (rx_chain_status & 0x4))
+ chainmask = 0x1B;
+ else
+ chainmask = 0x09;
+ } else {
+ if (rx_chain_status & 0x4)
+ chainmask = 0x3F;
+ else if (rx_chain_status & 0x2)
+ chainmask = 0x1B;
+ else
+ chainmask = 0x09;
+ }
h = ah->nfCalHist;
@@ -697,6 +707,8 @@
noise_floor = AR_PHY_CCA_MAX_AR9280_GOOD_VALUE;
else if (AR_SREV_9285(ah))
noise_floor = AR_PHY_CCA_MAX_AR9285_GOOD_VALUE;
+ else if (AR_SREV_9287(ah))
+ noise_floor = AR_PHY_CCA_MAX_AR9287_GOOD_VALUE;
else
noise_floor = AR_PHY_CCA_MAX_AR5416_GOOD_VALUE;
@@ -924,6 +936,7 @@
regVal |= (1 << (19 + i));
REG_WRITE(ah, 0x7834, regVal);
udelay(1);
+ regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1 << (19 + i)));
reg_field = MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9);
regVal |= (reg_field << (19 + i));
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 019bcbb..9028ab1 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -28,6 +28,7 @@
#define AR_PHY_CCA_MAX_AR5416_GOOD_VALUE -85
#define AR_PHY_CCA_MAX_AR9280_GOOD_VALUE -112
#define AR_PHY_CCA_MAX_AR9285_GOOD_VALUE -118
+#define AR_PHY_CCA_MAX_AR9287_GOOD_VALUE -118
#define AR_PHY_CCA_MAX_HIGH_VALUE -62
#define AR_PHY_CCA_MIN_BAD_VALUE -140
#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index ae7fb5d..4071fc9 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -509,6 +509,8 @@
REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
eep->baseEepHeader.dacLpMode);
+ udelay(100);
+
REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
pModal->miscBits >> 2);
@@ -902,7 +904,7 @@
u16 powerLimit)
{
#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */
-#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index b6c6cca..ca7694c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -842,7 +842,7 @@
static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
{
- if (AR_SREV_9287_11(ah))
+ if (AR_SREV_9287_11_OR_LATER(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9287Modes_rx_gain_9287_1_1,
ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_1), 6);
@@ -853,7 +853,7 @@
else if (AR_SREV_9280_20(ah))
ath9k_hw_init_rxgain_ini(ah);
- if (AR_SREV_9287_11(ah)) {
+ if (AR_SREV_9287_11_OR_LATER(ah)) {
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9287Modes_tx_gain_9287_1_1,
ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_1), 6);
@@ -965,7 +965,7 @@
ath9k_hw_init_mode_regs(ah);
if (ah->is_pciexpress)
- ath9k_hw_configpcipowersave(ah, 0);
+ ath9k_hw_configpcipowersave(ah, 0, 0);
else
ath9k_hw_disablepcie(ah);
@@ -1273,6 +1273,15 @@
*/
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ val = REG_READ(ah, AR_PCU_MISC_MODE2) &
+ (~AR_PCU_MISC_MODE2_HWWAR1);
+
+ if (AR_SREV_9287_10_OR_LATER(ah))
+ val = val & (~AR_PCU_MISC_MODE2_HWWAR2);
+
+ REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
+ }
if (!AR_SREV_5416_20_OR_LATER(ah) ||
AR_SREV_9280_10_OR_LATER(ah))
@@ -1784,7 +1793,7 @@
static bool ath9k_hw_chip_reset(struct ath_hw *ah,
struct ath9k_channel *chan)
{
- if (OLC_FOR_AR9280_20_LATER) {
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) {
if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON))
return false;
} else if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
@@ -2338,6 +2347,7 @@
struct ath9k_channel *curchan = ah->curchan;
u32 saveDefAntenna;
u32 macStaId1;
+ u64 tsf = 0;
int i, rx_chainmask, r;
ah->extprotspacing = sc->ht_extprotspacing;
@@ -2347,7 +2357,7 @@
if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
return -EIO;
- if (curchan)
+ if (curchan && !ah->chip_fullsleep)
ath9k_hw_getnf(ah, curchan);
if (bChannelChange &&
@@ -2356,8 +2366,8 @@
(chan->channel != ah->curchan->channel) &&
((chan->channelFlags & CHANNEL_ALL) ==
(ah->curchan->channelFlags & CHANNEL_ALL)) &&
- (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) &&
- !IS_CHAN_A_5MHZ_SPACED(ah->curchan)))) {
+ !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) ||
+ IS_CHAN_A_5MHZ_SPACED(ah->curchan))) {
if (ath9k_hw_channel_change(ah, chan, sc->tx_chan_width)) {
ath9k_hw_loadnf(ah, ah->curchan);
@@ -2372,6 +2382,10 @@
macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
+ /* For chips on which RTC reset is done, save TSF before it gets cleared */
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ tsf = ath9k_hw_gettsf64(ah);
+
saveLedState = REG_READ(ah, AR_CFG_LED) &
(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW);
@@ -2398,6 +2412,10 @@
udelay(50);
}
+ /* Restore TSF */
+ if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ ath9k_hw_settsf64(ah, tsf);
+
if (AR_SREV_9280_10_OR_LATER(ah))
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
@@ -3005,9 +3023,10 @@
* Programming the SerDes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*/
-void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore)
+void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off)
{
u8 i;
+ u32 val;
if (ah->is_pciexpress != true)
return;
@@ -3017,84 +3036,113 @@
return;
/* Nothing to do on restore for 11N */
- if (restore)
- return;
+ if (!restore) {
+ if (AR_SREV_9280_20_OR_LATER(ah)) {
+ /*
+ * AR9280 2.0 or later chips use SerDes values from the
+ * initvals.h initialized depending on chipset during
+ * ath9k_hw_init()
+ */
+ for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
+ REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
+ INI_RA(&ah->iniPcieSerdes, i, 1));
+ }
+ } else if (AR_SREV_9280(ah) &&
+ (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
- if (AR_SREV_9280_20_OR_LATER(ah)) {
- /*
- * AR9280 2.0 or later chips use SerDes values from the
- * initvals.h initialized depending on chipset during
- * ath9k_hw_init()
- */
- for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
- REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
- INI_RA(&ah->iniPcieSerdes, i, 1));
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+
+ /* Shut off CLKREQ active in L1 */
+ if (ah->config.pcie_clock_req)
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
+ else
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
+
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+
+ } else {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+
+ /*
+ * Ignore ah->ah_config.pcie_clock_req setting for
+ * pre-AR9280 11n
+ */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
- } else if (AR_SREV_9280(ah) &&
- (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+ udelay(1000);
- /* Shut off CLKREQ active in L1 */
- if (ah->config.pcie_clock_req)
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
- else
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
+ /* set bit 19 to allow forcing of pcie core into L1 state */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+ /* Several PCIe massages to ensure proper behaviour */
+ if (ah->config.pcie_waen) {
+ val = ah->config.pcie_waen;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else {
+ if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) {
+ val = AR9285_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else if (AR_SREV_9280(ah)) {
+ /*
+ * On AR9280 chips bit 22 of 0x4004 needs to be
+ * set otherwise card may disappear.
+ */
+ val = AR9280_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else
+ val = AR_WA_DEFAULT;
+ }
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
-
- } else {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
-
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
-
- /*
- * Ignore ah->ah_config.pcie_clock_req setting for
- * pre-AR9280 11n
- */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
-
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
-
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+ REG_WRITE(ah, AR_WA, val);
}
- udelay(1000);
-
- /* set bit 19 to allow forcing of pcie core into L1 state */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
-
- /* Several PCIe massages to ensure proper behaviour */
- if (ah->config.pcie_waen) {
- REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
- } else {
- if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah))
- REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT);
+ if (power_off) {
/*
- * On AR9280 chips bit 22 of 0x4004 needs to be set to
- * otherwise card may disappear.
+ * Set PCIe workaround bits
+ * bit 14 in WA register (disable L1) should only
+ * be set when device enters D3 and be cleared
+ * when device comes back to D0.
*/
- else if (AR_SREV_9280(ah))
- REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT);
- else
- REG_WRITE(ah, AR_WA, AR_WA_DEFAULT);
+ if (ah->config.pcie_waen) {
+ if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ } else {
+ if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) &&
+ (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
+ (AR_SREV_9280(ah) &&
+ (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ }
+ }
}
}
@@ -3652,15 +3700,7 @@
}
#endif
- if ((ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9160) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9100) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9280) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9285))
- pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
- else
- pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
+ pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
if (AR_SREV_9280(ah) || AR_SREV_9285(ah))
pCap->hw_caps &= ~ATH9K_HW_CAP_4KB_SPLITTRANS;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 9106a0b..b892345 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -106,7 +106,7 @@
#define AH_TSF_WRITE_TIMEOUT 100 /* (us) */
#define AH_TIME_QUANTUM 10
#define AR_KEYTABLE_SIZE 128
-#define POWER_UP_TIME 200000
+#define POWER_UP_TIME 10000
#define SPUR_RSSI_THRESH 40
#define CAB_TIMEOUT_VAL 10
@@ -650,7 +650,7 @@
const struct ath9k_beacon_state *bs);
bool ath9k_hw_setpower(struct ath_hw *ah,
enum ath9k_power_mode mode);
-void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore);
+void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off);
/* Interrupt Handling */
bool ath9k_hw_intrpend(struct ath_hw *ah);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 3dc7b5a..52bed89 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1131,7 +1131,7 @@
int r;
ath9k_ps_wakeup(sc);
- ath9k_hw_configpcipowersave(ah, 0);
+ ath9k_hw_configpcipowersave(ah, 0, 0);
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
@@ -1202,7 +1202,7 @@
spin_unlock_bh(&sc->sc_resetlock);
ath9k_hw_phy_disable(ah);
- ath9k_hw_configpcipowersave(ah, 1);
+ ath9k_hw_configpcipowersave(ah, 1, 1);
ath9k_ps_restore(sc);
ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
@@ -1226,11 +1226,6 @@
bool blocked = !!ath_is_rfkill_set(sc);
wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
-
- if (blocked)
- ath_radio_disable(sc);
- else
- ath_radio_enable(sc);
}
static void ath_start_rfkill_poll(struct ath_softc *sc)
@@ -1260,6 +1255,7 @@
DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
ath_deinit_leds(sc);
+ wiphy_rfkill_stop_polling(sc->hw->wiphy);
for (i = 0; i < sc->num_sec_wiphy; i++) {
struct ath_wiphy *aphy = sc->sec_wiphy[i];
@@ -1942,7 +1938,7 @@
init_channel = ath_get_curchannel(sc, hw);
/* Reset SERDES registers */
- ath9k_hw_configpcipowersave(sc->sc_ah, 0);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0);
/*
* The basic interface to setting the hardware in a good
@@ -2166,11 +2162,9 @@
} else
sc->rx.rxlink = NULL;
- wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah);
- ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index e5c29eb..d83b77f8 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -676,8 +676,9 @@
#define AR_RC_HOSTIF 0x00000100
#define AR_WA 0x4004
+#define AR_WA_D3_L1_DISABLE (1 << 14)
#define AR9285_WA_DEFAULT 0x004a05cb
-#define AR9280_WA_DEFAULT 0x0040073f
+#define AR9280_WA_DEFAULT 0x0040073b
#define AR_WA_DEFAULT 0x0000073f
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 83e3813..54ea61c 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -61,11 +61,28 @@
If unsure, say N.
+config B43_SDIO
+ bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)"
+ depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL
+ select SSB_SDIOHOST
+ ---help---
+ Broadcom 43xx device support for Soft-MAC SDIO devices.
+
+ With this config option you can drive Soft-MAC b43 cards with a
+ Secure Digital I/O interface.
+ This includes the WLAN daughter card found on the Nintendo Wii
+ video game console.
+ Note that this does not support Broadcom 43xx Full-MAC devices.
+
+ It's safe to select Y here, even if you don't have a B43 SDIO device.
+
+ If unsure, say N.
+
# Data transfers to the device via PIO
-# This is only needed on PCMCIA devices. All others can do DMA properly.
+# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
config B43_PIO
bool
- depends on B43 && (B43_PCMCIA || B43_FORCE_PIO)
+ depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
select SSB_BLOCKIO
default y
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index da379f4..84772a2 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -16,6 +16,7 @@
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
+b43-$(CONFIG_B43_SDIO) += sdio.o
b43-$(CONFIG_B43_DEBUG) += debugfs.o
obj-$(CONFIG_B43) += b43.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 09cfe68..fa1549a 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -629,13 +629,6 @@
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
- /* R/W lock for data transmission.
- * Transmissions on 2+ queues can run concurrently, but somebody else
- * might sync with TX by write_lock_irqsave()'ing. */
- rwlock_t tx_lock;
- /* Lock for LEDs access. */
- spinlock_t leds_lock;
-
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
@@ -686,6 +679,9 @@
struct work_struct tx_work;
/* Queue of packets to be transmitted. */
struct sk_buff_head tx_queue;
+
+ /* The device LEDs. */
+ struct b43_leds leds;
};
/* The type of the firmware file. */
@@ -768,13 +764,10 @@
/* The device initialization status.
* Use b43_status() to query. */
atomic_t __init_status;
- /* Saved init status for handling suspend. */
- int suspend_init_status;
bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */
bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */
bool radio_hw_enable; /* saved state of radio hardware enabled state */
- bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
@@ -794,12 +787,6 @@
/* Various statistics about the physical device. */
struct b43_stats stats;
- /* The device LEDs. */
- struct b43_led led_tx;
- struct b43_led led_rx;
- struct b43_led led_assoc;
- struct b43_led led_radio;
-
/* Reason code of the last interrupt. */
u32 irq_reason;
u32 dma_reason[6];
@@ -830,6 +817,10 @@
/* Debugging stuff follows. */
#ifdef CONFIG_B43_DEBUG
struct b43_dfsentry *dfsentry;
+ unsigned int irq_count;
+ unsigned int irq_bit_count[32];
+ unsigned int tx_count;
+ unsigned int rx_count;
#endif
};
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index 8f64943..80b19a4 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -689,6 +689,7 @@
add_dyn_dbg("debug_lo", B43_DBG_LO, 0);
add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0);
add_dyn_dbg("debug_keys", B43_DBG_KEYS, 0);
+ add_dyn_dbg("debug_verbose_stats", B43_DBG_VERBOSESTATS, 0);
#undef add_dyn_dbg
}
diff --git a/drivers/net/wireless/b43/debugfs.h b/drivers/net/wireless/b43/debugfs.h
index e47b4b4..822aad8 100644
--- a/drivers/net/wireless/b43/debugfs.h
+++ b/drivers/net/wireless/b43/debugfs.h
@@ -13,6 +13,7 @@
B43_DBG_LO,
B43_DBG_FIRMWARE,
B43_DBG_KEYS,
+ B43_DBG_VERBOSESTATS,
__B43_NR_DYNDBG,
};
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index a467ee2..8701034 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1428,9 +1428,9 @@
ring->nr_failed_tx_packets++;
ring->nr_total_packet_tries += status->frame_count;
#endif /* DEBUG */
- ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb);
+ ieee80211_tx_status(dev->wl->hw, meta->skb);
- /* skb is freed by ieee80211_tx_status_irqsafe() */
+ /* skb is freed by ieee80211_tx_status() */
meta->skb = NULL;
} else {
/* No need to call free_descriptor_buffer here, as
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index c8b3170..fbe3d4f 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -34,35 +34,75 @@
static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u16 ctl;
- spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl &= ~(1 << led_index);
else
ctl |= (1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
- spin_unlock_irqrestore(&wl->leds_lock, flags);
}
static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u16 ctl;
- spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl |= (1 << led_index);
else
ctl &= ~(1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
- spin_unlock_irqrestore(&wl->leds_lock, flags);
+}
+
+static void b43_led_update(struct b43_wldev *dev,
+ struct b43_led *led)
+{
+ bool radio_enabled;
+ bool turn_on;
+
+ if (!led->wl)
+ return;
+
+ radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable);
+
+ /* The led->state read is racy, but we don't care. In case we raced
+ * with the brightness_set handler, we will be called again soon
+ * to fixup our state. */
+ if (radio_enabled)
+ turn_on = atomic_read(&led->state) != LED_OFF;
+ else
+ turn_on = 0;
+ if (turn_on == led->hw_state)
+ return;
+ led->hw_state = turn_on;
+
+ if (turn_on)
+ b43_led_turn_on(dev, led->index, led->activelow);
+ else
+ b43_led_turn_off(dev, led->index, led->activelow);
+}
+
+static void b43_leds_work(struct work_struct *work)
+{
+ struct b43_leds *leds = container_of(work, struct b43_leds, work);
+ struct b43_wl *wl = container_of(leds, struct b43_wl, leds);
+ struct b43_wldev *dev;
+
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED))
+ goto out_unlock;
+
+ b43_led_update(dev, &wl->leds.led_tx);
+ b43_led_update(dev, &wl->leds.led_rx);
+ b43_led_update(dev, &wl->leds.led_radio);
+ b43_led_update(dev, &wl->leds.led_assoc);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
}
/* Callback from the LED subsystem. */
@@ -70,21 +110,12 @@
enum led_brightness brightness)
{
struct b43_led *led = container_of(led_dev, struct b43_led, led_dev);
- struct b43_wldev *dev = led->dev;
- bool radio_enabled;
+ struct b43_wl *wl = led->wl;
- if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
- return;
-
- /* Checking the radio-enabled status here is slightly racy,
- * but we want to avoid the locking overhead and we don't care
- * whether the LED has the wrong state for a second. */
- radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable);
-
- if (brightness == LED_OFF || !radio_enabled)
- b43_led_turn_off(dev, led->index, led->activelow);
- else
- b43_led_turn_on(dev, led->index, led->activelow);
+ if (likely(!wl->leds.stop)) {
+ atomic_set(&led->state, brightness);
+ ieee80211_queue_work(wl->hw, &wl->leds.work);
+ }
}
static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
@@ -93,15 +124,15 @@
{
int err;
- b43_led_turn_off(dev, led_index, activelow);
- if (led->dev)
+ if (led->wl)
return -EEXIST;
if (!default_trigger)
return -EINVAL;
- led->dev = dev;
+ led->wl = dev->wl;
led->index = led_index;
led->activelow = activelow;
strncpy(led->name, name, sizeof(led->name));
+ atomic_set(&led->state, 0);
led->led_dev.name = led->name;
led->led_dev.default_trigger = default_trigger;
@@ -110,19 +141,19 @@
err = led_classdev_register(dev->dev->dev, &led->led_dev);
if (err) {
b43warn(dev->wl, "LEDs: Failed to register %s\n", name);
- led->dev = NULL;
+ led->wl = NULL;
return err;
}
+
return 0;
}
static void b43_unregister_led(struct b43_led *led)
{
- if (!led->dev)
+ if (!led->wl)
return;
led_classdev_unregister(&led->led_dev);
- b43_led_turn_off(led->dev, led->index, led->activelow);
- led->dev = NULL;
+ led->wl = NULL;
}
static void b43_map_led(struct b43_wldev *dev,
@@ -137,24 +168,20 @@
* generic LED triggers. */
switch (behaviour) {
case B43_LED_INACTIVE:
- break;
case B43_LED_OFF:
- b43_led_turn_off(dev, led_index, activelow);
- break;
case B43_LED_ON:
- b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_ACTIVITY:
case B43_LED_TRANSFER:
case B43_LED_APTRANSFER:
snprintf(name, sizeof(name),
"b43-%s::tx", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_tx, name,
+ b43_register_led(dev, &dev->wl->leds.led_tx, name,
ieee80211_get_tx_led_name(hw),
led_index, activelow);
snprintf(name, sizeof(name),
"b43-%s::rx", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_rx, name,
+ b43_register_led(dev, &dev->wl->leds.led_rx, name,
ieee80211_get_rx_led_name(hw),
led_index, activelow);
break;
@@ -164,18 +191,15 @@
case B43_LED_MODE_BG:
snprintf(name, sizeof(name),
"b43-%s::radio", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_radio, name,
+ b43_register_led(dev, &dev->wl->leds.led_radio, name,
ieee80211_get_radio_led_name(hw),
led_index, activelow);
- /* Sync the RF-kill LED state with radio and switch states. */
- if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
- b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_WEIRD:
case B43_LED_ASSOC:
snprintf(name, sizeof(name),
"b43-%s::assoc", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_assoc, name,
+ b43_register_led(dev, &dev->wl->leds.led_assoc, name,
ieee80211_get_assoc_led_name(hw),
led_index, activelow);
break;
@@ -186,58 +210,150 @@
}
}
-void b43_leds_init(struct b43_wldev *dev)
+static void b43_led_get_sprominfo(struct b43_wldev *dev,
+ unsigned int led_index,
+ enum b43_led_behaviour *behaviour,
+ bool *activelow)
{
struct ssb_bus *bus = dev->dev->bus;
u8 sprom[4];
- int i;
- enum b43_led_behaviour behaviour;
- bool activelow;
sprom[0] = bus->sprom.gpio0;
sprom[1] = bus->sprom.gpio1;
sprom[2] = bus->sprom.gpio2;
sprom[3] = bus->sprom.gpio3;
- for (i = 0; i < 4; i++) {
- if (sprom[i] == 0xFF) {
- /* There is no LED information in the SPROM
- * for this LED. Hardcode it here. */
- activelow = 0;
- switch (i) {
- case 0:
- behaviour = B43_LED_ACTIVITY;
- activelow = 1;
- if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
- behaviour = B43_LED_RADIO_ALL;
- break;
- case 1:
- behaviour = B43_LED_RADIO_B;
- if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
- behaviour = B43_LED_ASSOC;
- break;
- case 2:
- behaviour = B43_LED_RADIO_A;
- break;
- case 3:
- behaviour = B43_LED_OFF;
- break;
- default:
- B43_WARN_ON(1);
- return;
- }
- } else {
- behaviour = sprom[i] & B43_LED_BEHAVIOUR;
- activelow = !!(sprom[i] & B43_LED_ACTIVELOW);
+ if (sprom[led_index] == 0xFF) {
+ /* There is no LED information in the SPROM
+ * for this LED. Hardcode it here. */
+ *activelow = 0;
+ switch (led_index) {
+ case 0:
+ *behaviour = B43_LED_ACTIVITY;
+ *activelow = 1;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
+ *behaviour = B43_LED_RADIO_ALL;
+ break;
+ case 1:
+ *behaviour = B43_LED_RADIO_B;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
+ *behaviour = B43_LED_ASSOC;
+ break;
+ case 2:
+ *behaviour = B43_LED_RADIO_A;
+ break;
+ case 3:
+ *behaviour = B43_LED_OFF;
+ break;
+ default:
+ B43_WARN_ON(1);
+ return;
}
- b43_map_led(dev, i, behaviour, activelow);
+ } else {
+ *behaviour = sprom[led_index] & B43_LED_BEHAVIOUR;
+ *activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW);
}
}
+void b43_leds_init(struct b43_wldev *dev)
+{
+ struct b43_led *led;
+ unsigned int i;
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+ /* Sync the RF-kill LED state (if we have one) with radio and switch states. */
+ led = &dev->wl->leds.led_radio;
+ if (led->wl) {
+ if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) {
+ b43_led_turn_on(dev, led->index, led->activelow);
+ led->hw_state = 1;
+ atomic_set(&led->state, 1);
+ } else {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ }
+
+ /* Initialize TX/RX/ASSOC leds */
+ led = &dev->wl->leds.led_tx;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ led = &dev->wl->leds.led_rx;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ led = &dev->wl->leds.led_assoc;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+
+ /* Initialize other LED states. */
+ for (i = 0; i < B43_MAX_NR_LEDS; i++) {
+ b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
+ switch (behaviour) {
+ case B43_LED_OFF:
+ b43_led_turn_off(dev, i, activelow);
+ break;
+ case B43_LED_ON:
+ b43_led_turn_on(dev, i, activelow);
+ break;
+ default:
+ /* Leave others as-is. */
+ break;
+ }
+ }
+
+ dev->wl->leds.stop = 0;
+}
+
void b43_leds_exit(struct b43_wldev *dev)
{
- b43_unregister_led(&dev->led_tx);
- b43_unregister_led(&dev->led_rx);
- b43_unregister_led(&dev->led_assoc);
- b43_unregister_led(&dev->led_radio);
+ struct b43_leds *leds = &dev->wl->leds;
+
+ b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow);
+ b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow);
+ b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow);
+ b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow);
+}
+
+void b43_leds_stop(struct b43_wldev *dev)
+{
+ struct b43_leds *leds = &dev->wl->leds;
+
+ leds->stop = 1;
+ cancel_work_sync(&leds->work);
+}
+
+void b43_leds_register(struct b43_wldev *dev)
+{
+ unsigned int i;
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+ INIT_WORK(&dev->wl->leds.work, b43_leds_work);
+
+ /* Register the LEDs to the LED subsystem. */
+ for (i = 0; i < B43_MAX_NR_LEDS; i++) {
+ b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
+ b43_map_led(dev, i, behaviour, activelow);
+ }
+}
+
+void b43_leds_unregister(struct b43_wldev *dev)
+{
+ struct b43_leds *leds = &dev->wl->leds;
+
+ b43_unregister_led(&leds->led_tx);
+ b43_unregister_led(&leds->led_rx);
+ b43_unregister_led(&leds->led_assoc);
+ b43_unregister_led(&leds->led_radio);
}
diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h
index b8b1dd5..9592e4c 100644
--- a/drivers/net/wireless/b43/leds.h
+++ b/drivers/net/wireless/b43/leds.h
@@ -7,12 +7,13 @@
#include <linux/types.h>
#include <linux/leds.h>
+#include <linux/workqueue.h>
#define B43_LED_MAX_NAME_LEN 31
struct b43_led {
- struct b43_wldev *dev;
+ struct b43_wl *wl;
/* The LED class device */
struct led_classdev led_dev;
/* The index number of the LED. */
@@ -22,8 +23,24 @@
bool activelow;
/* The unique name string for this LED device. */
char name[B43_LED_MAX_NAME_LEN + 1];
+ /* The current status of the LED. This is updated locklessly. */
+ atomic_t state;
+ /* The active state in hardware. */
+ bool hw_state;
};
+struct b43_leds {
+ struct b43_led led_tx;
+ struct b43_led led_rx;
+ struct b43_led led_radio;
+ struct b43_led led_assoc;
+
+ bool stop;
+ struct work_struct work;
+};
+
+#define B43_MAX_NR_LEDS 4
+
#define B43_LED_BEHAVIOUR 0x7F
#define B43_LED_ACTIVELOW 0x80
/* LED behaviour values */
@@ -42,23 +59,35 @@
B43_LED_INACTIVE,
};
+void b43_leds_register(struct b43_wldev *dev);
+void b43_leds_unregister(struct b43_wldev *dev);
void b43_leds_init(struct b43_wldev *dev);
void b43_leds_exit(struct b43_wldev *dev);
+void b43_leds_stop(struct b43_wldev *dev);
#else /* CONFIG_B43_LEDS */
/* LED support disabled */
-struct b43_led {
+struct b43_leds {
/* empty */
};
+static inline void b43_leds_register(struct b43_wldev *dev)
+{
+}
+static inline void b43_leds_unregister(struct b43_wldev *dev)
+{
+}
static inline void b43_leds_init(struct b43_wldev *dev)
{
}
static inline void b43_leds_exit(struct b43_wldev *dev)
{
}
+static inline void b43_leds_stop(struct b43_wldev *dev)
+{
+}
#endif /* CONFIG_B43_LEDS */
#endif /* B43_LEDS_H_ */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e789792..9b907a3 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -8,6 +8,9 @@
Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ SDIO support
+ Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es>
+
Some parts of the code in this file are derived from the ipw2200
driver Copyright(c) 2003 - 2004 Intel Corporation.
@@ -53,6 +56,8 @@
#include "xmit.h"
#include "lo.h"
#include "pcmcia.h"
+#include "sdio.h"
+#include <linux/mmc/sdio_func.h>
MODULE_DESCRIPTION("Broadcom B43 wireless driver");
MODULE_AUTHOR("Martin Langer");
@@ -1587,7 +1592,7 @@
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
/* wl->mutex is enough. */
b43_do_beacon_update_trigger_work(dev);
mmiowb();
@@ -1825,6 +1830,16 @@
/* Re-enable interrupts on the device by restoring the current interrupt mask. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
+
+#if B43_DEBUG
+ if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ dev->irq_count++;
+ for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+ if (reason & (1 << i))
+ dev->irq_bit_count[i]++;
+ }
+ }
+#endif
}
/* Interrupt thread handler. Handles device interrupts in thread context. */
@@ -1905,6 +1920,21 @@
return ret;
}
+/* SDIO interrupt handler. This runs in process context. */
+static void b43_sdio_interrupt_handler(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+ irqreturn_t ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = b43_do_interrupt(dev);
+ if (ret == IRQ_WAKE_THREAD)
+ b43_do_interrupt_thread(dev);
+
+ mutex_unlock(&wl->mutex);
+}
+
void b43_do_release_fw(struct b43_firmware_file *fw)
{
release_firmware(fw->data);
@@ -2645,6 +2675,20 @@
cfp_pretbtt = 50;
}
b43_write16(dev, 0x612, cfp_pretbtt);
+
+ /* FIXME: We don't currently implement the PMQ mechanism,
+ * so always disable it. If we want to implement PMQ,
+ * we need to enable it here (clear DISCPMQ) in AP mode.
+ */
+ if (0 /* ctl & B43_MACCTL_AP */) {
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL)
+ & ~B43_MACCTL_DISCPMQ);
+ } else {
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL)
+ | B43_MACCTL_DISCPMQ);
+ }
}
static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
@@ -2873,6 +2917,27 @@
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
wmb();
+
+#if B43_DEBUG
+ if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ unsigned int i;
+
+ b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
+ dev->irq_count / 15,
+ dev->tx_count / 15,
+ dev->rx_count / 15);
+ dev->irq_count = 0;
+ dev->tx_count = 0;
+ dev->rx_count = 0;
+ for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+ if (dev->irq_bit_count[i]) {
+ b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
+ dev->irq_bit_count[i] / 15, i, (1 << i));
+ dev->irq_bit_count[i] = 0;
+ }
+ }
+ }
+#endif
}
static void do_periodic_work(struct b43_wldev *dev)
@@ -3002,14 +3067,18 @@
static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
+ struct b43_wldev *dev;
+ int count = -ENODEV;
- /* FIXME: We need to take wl->mutex here to make sure the device
- * is not going away from under our ass. However it could deadlock
- * with hwrng internal locking. */
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
+ *data = b43_read16(dev, B43_MMIO_RNG);
+ count = sizeof(u16);
+ }
+ mutex_unlock(&wl->mutex);
- *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
-
- return (sizeof(u16));
+ return count;
}
#endif /* CONFIG_B43_HWRNG */
@@ -3068,6 +3137,9 @@
dev_kfree_skb(skb); /* Drop it */
}
+#if B43_DEBUG
+ dev->tx_count++;
+#endif
mutex_unlock(&wl->mutex);
}
@@ -3820,7 +3892,7 @@
/* Disable interrupts on the device. */
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
/* wl->mutex is locked. That is enough. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
@@ -3830,10 +3902,15 @@
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
spin_unlock_irq(&wl->hardirq_lock);
}
- /* Synchronize the interrupt handlers. Unlock to avoid deadlocks. */
+ /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
orig_dev = dev;
mutex_unlock(&wl->mutex);
- synchronize_irq(dev->dev->irq);
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ b43_sdio_free_irq(dev);
+ } else {
+ synchronize_irq(dev->dev->irq);
+ free_irq(dev->dev->irq, dev);
+ }
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (!dev)
@@ -3850,7 +3927,7 @@
dev_kfree_skb(skb_dequeue(&wl->tx_queue));
b43_mac_suspend(dev);
- free_irq(dev->dev->irq, dev);
+ b43_leds_exit(dev);
b43dbg(wl, "Wireless interface stopped\n");
return dev;
@@ -3864,12 +3941,20 @@
B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
drain_txstatus_queue(dev);
- err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
- b43_interrupt_thread_handler,
- IRQF_SHARED, KBUILD_MODNAME, dev);
- if (err) {
- b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
- goto out;
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
+ if (err) {
+ b43err(dev->wl, "Cannot request SDIO IRQ\n");
+ goto out;
+ }
+ } else {
+ err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
+ b43_interrupt_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
+ goto out;
+ }
}
/* We are ready to run. */
@@ -3882,8 +3967,10 @@
/* Start maintainance work */
b43_periodic_tasks_setup(dev);
+ b43_leds_init(dev);
+
b43dbg(dev->wl, "Wireless interface started\n");
- out:
+out:
return err;
}
@@ -4160,10 +4247,6 @@
macctl |= B43_MACCTL_PSM_JMP0;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
- if (!dev->suspend_in_progress) {
- b43_leds_exit(dev);
- b43_rng_exit(dev->wl);
- }
b43_dma_free(dev);
b43_pio_free(dev);
b43_chip_exit(dev);
@@ -4180,7 +4263,6 @@
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct ssb_sprom *sprom = &bus->sprom;
struct b43_phy *phy = &dev->phy;
@@ -4264,7 +4346,9 @@
/* Maximum Contention Window */
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
- if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) {
+ if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
+ (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
+ B43_FORCE_PIO) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
@@ -4280,15 +4364,13 @@
ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
- if (!dev->suspend_in_progress)
- b43_rng_init(wl);
+
+ ieee80211_wake_queues(dev->wl->hw);
ieee80211_wake_queues(dev->wl->hw);
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (!dev->suspend_in_progress)
- b43_leds_init(dev);
out:
return err;
@@ -4837,7 +4919,6 @@
/* Initialize struct b43_wl */
wl->hw = hw;
- spin_lock_init(&wl->leds_lock);
mutex_init(&wl->mutex);
spin_lock_init(&wl->hardirq_lock);
INIT_LIST_HEAD(&wl->devlist);
@@ -4878,6 +4959,8 @@
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ b43_leds_register(wl->current_dev);
+ b43_rng_init(wl);
}
out:
@@ -4906,12 +4989,15 @@
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
b43_one_core_detach(dev);
if (list_empty(&wl->devlist)) {
+ b43_rng_exit(wl);
+ b43_leds_unregister(wldev);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/
@@ -4929,80 +5015,17 @@
ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
-#ifdef CONFIG_PM
-
-static int b43_suspend(struct ssb_device *dev, pm_message_t state)
-{
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
- struct b43_wl *wl = wldev->wl;
-
- b43dbg(wl, "Suspending...\n");
-
- mutex_lock(&wl->mutex);
- wldev->suspend_in_progress = true;
- wldev->suspend_init_status = b43_status(wldev);
- if (wldev->suspend_init_status >= B43_STAT_STARTED)
- wldev = b43_wireless_core_stop(wldev);
- if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED)
- b43_wireless_core_exit(wldev);
- mutex_unlock(&wl->mutex);
-
- b43dbg(wl, "Device suspended.\n");
-
- return 0;
-}
-
-static int b43_resume(struct ssb_device *dev)
-{
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
- struct b43_wl *wl = wldev->wl;
- int err = 0;
-
- b43dbg(wl, "Resuming...\n");
-
- mutex_lock(&wl->mutex);
- if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
- err = b43_wireless_core_init(wldev);
- if (err) {
- b43err(wl, "Resume failed at core init\n");
- goto out;
- }
- }
- if (wldev->suspend_init_status >= B43_STAT_STARTED) {
- err = b43_wireless_core_start(wldev);
- if (err) {
- b43_leds_exit(wldev);
- b43_rng_exit(wldev->wl);
- b43_wireless_core_exit(wldev);
- b43err(wl, "Resume failed at core start\n");
- goto out;
- }
- }
- b43dbg(wl, "Device resumed.\n");
- out:
- wldev->suspend_in_progress = false;
- mutex_unlock(&wl->mutex);
- return err;
-}
-
-#else /* CONFIG_PM */
-# define b43_suspend NULL
-# define b43_resume NULL
-#endif /* CONFIG_PM */
-
static struct ssb_driver b43_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43_ssb_tbl,
.probe = b43_probe,
.remove = b43_remove,
- .suspend = b43_suspend,
- .resume = b43_resume,
};
static void b43_print_driverinfo(void)
{
const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
- *feat_leds = "";
+ *feat_leds = "", *feat_sdio = "";
#ifdef CONFIG_B43_PCI_AUTOSELECT
feat_pci = "P";
@@ -5016,11 +5039,14 @@
#ifdef CONFIG_B43_LEDS
feat_leds = "L";
#endif
+#ifdef CONFIG_B43_SDIO
+ feat_sdio = "S";
+#endif
printk(KERN_INFO "Broadcom 43xx driver loaded "
- "[ Features: %s%s%s%s, Firmware-ID: "
+ "[ Features: %s%s%s%s%s, Firmware-ID: "
B43_SUPPORTED_FIRMWARE_ID " ]\n",
feat_pci, feat_pcmcia, feat_nphy,
- feat_leds);
+ feat_leds, feat_sdio);
}
static int __init b43_init(void)
@@ -5031,13 +5057,18 @@
err = b43_pcmcia_init();
if (err)
goto err_dfs_exit;
- err = ssb_driver_register(&b43_ssb_driver);
+ err = b43_sdio_init();
if (err)
goto err_pcmcia_exit;
+ err = ssb_driver_register(&b43_ssb_driver);
+ if (err)
+ goto err_sdio_exit;
b43_print_driverinfo();
return err;
+err_sdio_exit:
+ b43_sdio_exit();
err_pcmcia_exit:
b43_pcmcia_exit();
err_dfs_exit:
@@ -5048,6 +5079,7 @@
static void __exit b43_exit(void)
{
ssb_driver_unregister(&b43_ssb_driver);
+ b43_sdio_exit();
b43_pcmcia_exit();
b43_debugfs_exit();
}
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 3e02d96..1e318d8 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -2228,6 +2228,16 @@
return B43_TXPWR_RES_DONE;
}
+void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+ if (on) {
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8);
+ } else {
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007);
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007);
+ }
+}
+
const struct b43_phy_operations b43_phyops_lp = {
.allocate = b43_lpphy_op_allocate,
.free = b43_lpphy_op_free,
@@ -2239,7 +2249,7 @@
.radio_read = b43_lpphy_op_radio_read,
.radio_write = b43_lpphy_op_radio_write,
.software_rfkill = b43_lpphy_op_software_rfkill,
- .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_analog = b43_lpphy_op_switch_analog,
.switch_channel = b43_lpphy_op_switch_channel,
.get_default_chan = b43_lpphy_op_get_default_chan,
.set_rx_antenna = b43_lpphy_op_set_rx_antenna,
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 3498b68..e96091b3 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -574,7 +574,7 @@
q->buffer_used -= total_len;
q->free_packet_slots += 1;
- ieee80211_tx_status_irqsafe(dev->wl->hw, pack->skb);
+ ieee80211_tx_status(dev->wl->hw, pack->skb);
pack->skb = NULL;
list_add(&pack->list, &q->packets_list);
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 31e5599..7a3218c 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -28,7 +28,7 @@
/* Returns TRUE, if the radio is enabled in hardware. */
bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
{
- if (dev->phy.rev >= 3) {
+ if (dev->phy.rev >= 3 || dev->phy.type == B43_PHYTYPE_LP) {
if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
& B43_MMIO_RADIO_HWENABLED_HI_MASK))
return 1;
diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c
new file mode 100644
index 0000000..0d3ac64
--- /dev/null
+++ b/drivers/net/wireless/b43/sdio.c
@@ -0,0 +1,202 @@
+/*
+ * Broadcom B43 wireless driver
+ *
+ * SDIO over Sonics Silicon Backplane bus glue for b43.
+ *
+ * Copyright (C) 2009 Albert Herranz
+ * Copyright (C) 2009 Michael Buesch <mb@bu3sch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/ssb/ssb.h>
+
+#include "sdio.h"
+#include "b43.h"
+
+
+#define HNBU_CHIPID 0x01 /* vendor & device id */
+
+#define B43_SDIO_BLOCK_SIZE 64 /* rx fifo max size in bytes */
+
+
+static const struct b43_sdio_quirk {
+ u16 vendor;
+ u16 device;
+ unsigned int quirks;
+} b43_sdio_quirks[] = {
+ { 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, },
+ { },
+};
+
+
+static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device)
+{
+ const struct b43_sdio_quirk *q;
+
+ for (q = b43_sdio_quirks; q->quirks; q++) {
+ if (vendor == q->vendor && device == q->device)
+ return q->quirks;
+ }
+
+ return 0;
+}
+
+static void b43_sdio_interrupt_dispatcher(struct sdio_func *func)
+{
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+ struct b43_wldev *dev = sdio->irq_handler_opaque;
+
+ if (unlikely(b43_status(dev) < B43_STAT_STARTED))
+ return;
+
+ sdio_release_host(func);
+ sdio->irq_handler(dev);
+ sdio_claim_host(func);
+}
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev))
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct sdio_func *func = bus->host_sdio;
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+ int err;
+
+ sdio->irq_handler_opaque = dev;
+ sdio->irq_handler = handler;
+ sdio_claim_host(func);
+ err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher);
+ sdio_release_host(func);
+
+ return err;
+}
+
+void b43_sdio_free_irq(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct sdio_func *func = bus->host_sdio;
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+ sdio->irq_handler_opaque = NULL;
+ sdio->irq_handler = NULL;
+}
+
+static int b43_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct b43_sdio *sdio;
+ struct sdio_func_tuple *tuple;
+ u16 vendor = 0, device = 0;
+ int error;
+
+ /* Look for the card chip identifier. */
+ tuple = func->tuples;
+ while (tuple) {
+ switch (tuple->code) {
+ case 0x80:
+ switch (tuple->data[0]) {
+ case HNBU_CHIPID:
+ if (tuple->size != 5)
+ break;
+ vendor = tuple->data[1] | (tuple->data[2]<<8);
+ device = tuple->data[3] | (tuple->data[4]<<8);
+ dev_info(&func->dev, "Chip ID %04x:%04x\n",
+ vendor, device);
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ tuple = tuple->next;
+ }
+ if (!vendor || !device) {
+ error = -ENODEV;
+ goto out;
+ }
+
+ sdio_claim_host(func);
+ error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE);
+ if (error) {
+ dev_err(&func->dev, "failed to set block size to %u bytes,"
+ " error %d\n", B43_SDIO_BLOCK_SIZE, error);
+ goto err_release_host;
+ }
+ error = sdio_enable_func(func);
+ if (error) {
+ dev_err(&func->dev, "failed to enable func, error %d\n", error);
+ goto err_release_host;
+ }
+ sdio_release_host(func);
+
+ sdio = kzalloc(sizeof(*sdio), GFP_KERNEL);
+ if (!sdio) {
+ error = -ENOMEM;
+ dev_err(&func->dev, "failed to allocate ssb bus\n");
+ goto err_disable_func;
+ }
+ error = ssb_bus_sdiobus_register(&sdio->ssb, func,
+ b43_sdio_get_quirks(vendor, device));
+ if (error) {
+ dev_err(&func->dev, "failed to register ssb sdio bus,"
+ " error %d\n", error);
+ goto err_free_ssb;
+ }
+ sdio_set_drvdata(func, sdio);
+
+ return 0;
+
+err_free_ssb:
+ kfree(sdio);
+err_disable_func:
+ sdio_disable_func(func);
+err_release_host:
+ sdio_release_host(func);
+out:
+ return error;
+}
+
+static void b43_sdio_remove(struct sdio_func *func)
+{
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+
+ ssb_bus_unregister(&sdio->ssb);
+ sdio_disable_func(func);
+ kfree(sdio);
+ sdio_set_drvdata(func, NULL);
+}
+
+static const struct sdio_device_id b43_sdio_ids[] = {
+ { SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */
+ { },
+};
+
+static struct sdio_driver b43_sdio_driver = {
+ .name = "b43-sdio",
+ .id_table = b43_sdio_ids,
+ .probe = b43_sdio_probe,
+ .remove = b43_sdio_remove,
+};
+
+int b43_sdio_init(void)
+{
+ return sdio_register_driver(&b43_sdio_driver);
+}
+
+void b43_sdio_exit(void)
+{
+ sdio_unregister_driver(&b43_sdio_driver);
+}
diff --git a/drivers/net/wireless/b43/sdio.h b/drivers/net/wireless/b43/sdio.h
new file mode 100644
index 0000000..fb63309
--- /dev/null
+++ b/drivers/net/wireless/b43/sdio.h
@@ -0,0 +1,45 @@
+#ifndef B43_SDIO_H_
+#define B43_SDIO_H_
+
+#include <linux/ssb/ssb.h>
+
+struct b43_wldev;
+
+
+#ifdef CONFIG_B43_SDIO
+
+struct b43_sdio {
+ struct ssb_bus ssb;
+ void *irq_handler_opaque;
+ void (*irq_handler)(struct b43_wldev *dev);
+};
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev));
+void b43_sdio_free_irq(struct b43_wldev *dev);
+
+int b43_sdio_init(void);
+void b43_sdio_exit(void);
+
+
+#else /* CONFIG_B43_SDIO */
+
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev))
+{
+ return -ENODEV;
+}
+void b43_sdio_free_irq(struct b43_wldev *dev)
+{
+}
+static inline int b43_sdio_init(void)
+{
+ return 0;
+}
+static inline void b43_sdio_exit(void)
+{
+}
+
+#endif /* CONFIG_B43_SDIO */
+#endif /* B43_SDIO_H_ */
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 14f5412..ac9f600 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -690,8 +690,11 @@
}
memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
- ieee80211_rx_irqsafe(dev->wl->hw, skb);
+ ieee80211_rx(dev->wl->hw, skb);
+#if B43_DEBUG
+ dev->rx_count++;
+#endif
return;
drop:
b43dbg(dev->wl, "RX: Packet dropped\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index ca61d37..3259b88 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2021,6 +2021,12 @@
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 1d539e3..a6391c7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1163,6 +1163,12 @@
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index b90adcb..8e1bb53 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -250,12 +250,20 @@
}
spin_unlock_irqrestore(&rxq->lock, flags);
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
priority);
if (!skb) {
- IWL_CRIT(priv, "Can not allocate SKB buffers\n");
+ if (net_ratelimit())
+ IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index a2b9ec8..c6633fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -520,7 +520,7 @@
struct iwl_host_cmd cmd = {
.id = REPLY_WEPKEY,
.data = wep_cmd,
- .flags = CMD_SYNC,
+ .flags = CMD_ASYNC,
};
memset(wep_cmd, 0, cmd_size +
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 0909668..4f2d439 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1146,11 +1146,18 @@
}
spin_unlock_irqrestore(&rxq->lock, flags);
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
if (!skb) {
if (net_ratelimit())
- IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
+ IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 5462cb5..567f029 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -380,7 +380,7 @@
{
}
-static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 7b14d5b..88060e1 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -1,5 +1,5 @@
menuconfig WL12XX
- boolean "TI wl12xx driver support"
+ tristate "TI wl12xx driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable TI wl12xx driver support. The drivers make
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 3868884..23a6a6d 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1070,7 +1070,7 @@
/* Find bulk out endpoint */
endpoint = &iface_desc->endpoint[1].desc;
- if ((endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT &&
+ if (usb_endpoint_dir_out(endpoint) &&
usb_endpoint_xfer_bulk(endpoint)) {
bulk_out_ep = endpoint->bEndpointAddress;
} else {
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index dc22782..83a044d 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -134,18 +134,15 @@
}
/* Enable the Rx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- reg_data | XEL_RSR_RECV_IE_MASK);
+ XEL_RSR_RECV_IE_MASK);
/* Enable the Rx interrupts for the second Buffer if
* configured in HW */
if (drvdata->rx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_RSR_OFFSET,
- reg_data | XEL_RSR_RECV_IE_MASK);
+ XEL_RSR_RECV_IE_MASK);
}
/* Enable the Global Interrupt Enable */
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 82b3489..9a4dd59 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -117,8 +117,6 @@
source "drivers/staging/vt6656/Kconfig"
-source "drivers/staging/cpc-usb/Kconfig"
-
source "drivers/staging/udlfb/Kconfig"
source "drivers/staging/hv/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index b1cad0d..104f2f8 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -40,7 +40,6 @@
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/
-obj-$(CONFIG_USB_CPC) += cpc-usb/
obj-$(CONFIG_FB_UDL) += udlfb/
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_VME_BUS) += vme/
diff --git a/drivers/staging/cpc-usb/Kconfig b/drivers/staging/cpc-usb/Kconfig
deleted file mode 100644
index 2be0bc9..0000000
--- a/drivers/staging/cpc-usb/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config USB_CPC
- tristate "CPC CAN USB driver"
- depends on USB && PROC_FS
- default n
diff --git a/drivers/staging/cpc-usb/Makefile b/drivers/staging/cpc-usb/Makefile
deleted file mode 100644
index 3f83170..0000000
--- a/drivers/staging/cpc-usb/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_USB_CPC) += cpc-usb.o
-
-cpc-usb-y := cpc-usb_drv.o sja2m16c_2.o
diff --git a/drivers/staging/cpc-usb/TODO b/drivers/staging/cpc-usb/TODO
deleted file mode 100644
index 9b1752f..0000000
--- a/drivers/staging/cpc-usb/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-Things to do for this driver to get merged into the main portion of the
-kernel:
- - checkpatch cleanups
- - sparse clean
- - remove proc code
- - tie into CAN socket interfaces if possible
- - figure out sane userspace api
- - use linux's error codes
-
-Send patches to Greg Kroah-Hartman <greg@kroah.com>
diff --git a/drivers/staging/cpc-usb/cpc-usb_drv.c b/drivers/staging/cpc-usb/cpc-usb_drv.c
deleted file mode 100644
index c5eca46..0000000
--- a/drivers/staging/cpc-usb/cpc-usb_drv.c
+++ /dev/null
@@ -1,1184 +0,0 @@
-/*
- * CPC-USB CAN Interface Kernel Driver
- *
- * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <asm/uaccess.h>
-#include <linux/usb.h>
-
-
-#include <linux/proc_fs.h>
-
-#include "cpc.h"
-
-#include "cpc_int.h"
-#include "cpcusb.h"
-
-#include "sja2m16c.h"
-
-/* Version Information */
-#define DRIVER_AUTHOR "Sebastian Haas <haas@ems-wuensche.com>"
-#define DRIVER_DESC "CPC-USB Driver for Linux Kernel 2.6"
-#define DRIVER_VERSION CPC_DRIVER_VERSION
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-
-/* Define these values to match your devices */
-#define USB_CPCUSB_VENDOR_ID 0x12D6
-
-#define USB_CPCUSB_M16C_PRODUCT_ID 0x0888
-#define USB_CPCUSB_LPC2119_PRODUCT_ID 0x0444
-
-#define CPC_USB_PROC_DIR CPC_PROC_DIR "cpc-usb"
-
-static struct proc_dir_entry *procDir;
-static struct proc_dir_entry *procEntry;
-
-/* Module parameters */
-static int debug;
-module_param(debug, int, S_IRUGO);
-
-/* table of devices that work with this driver */
-static struct usb_device_id cpcusb_table[] = {
- {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_M16C_PRODUCT_ID)},
- {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_LPC2119_PRODUCT_ID)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, cpcusb_table);
-
-/* use to prevent kernel panic if driver is unloaded
- * while a programm has still open the device
- */
-DECLARE_WAIT_QUEUE_HEAD(rmmodWq);
-atomic_t useCount;
-
-static CPC_USB_T *CPCUSB_Table[CPC_USB_CARD_CNT] = { 0 };
-static unsigned int CPCUsbCnt;
-
-/* prevent races between open() and disconnect() */
-static DECLARE_MUTEX(disconnect_sem);
-
-/* local function prototypes */
-static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos);
-static ssize_t cpcusb_write(struct file *file, const char *buffer,
- size_t count, loff_t *ppos);
-static unsigned int cpcusb_poll(struct file *file, poll_table * wait);
-static int cpcusb_open(struct inode *inode, struct file *file);
-static int cpcusb_release(struct inode *inode, struct file *file);
-
-static int cpcusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void cpcusb_disconnect(struct usb_interface *interface);
-
-static void cpcusb_read_bulk_callback(struct urb *urb);
-static void cpcusb_write_bulk_callback(struct urb *urb);
-static void cpcusb_read_interrupt_callback(struct urb *urb);
-
-static int cpcusb_setup_intrep(CPC_USB_T *card);
-
-static struct file_operations cpcusb_fops = {
- /*
- * The owner field is part of the module-locking
- * mechanism. The idea is that the kernel knows
- * which module to increment the use-counter of
- * BEFORE it calls the device's open() function.
- * This also means that the kernel can decrement
- * the use-counter again before calling release()
- * or should the open() function fail.
- */
- .owner = THIS_MODULE,
-
- .read = cpcusb_read,
- .write = cpcusb_write,
- .poll = cpcusb_poll,
- .open = cpcusb_open,
- .release = cpcusb_release,
-};
-
-/*
- * usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
- */
-static struct usb_class_driver cpcusb_class = {
- .name = "usb/cpc_usb%d",
- .fops = &cpcusb_fops,
- .minor_base = CPC_USB_BASE_MNR,
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver cpcusb_driver = {
- .name = "cpc-usb",
- .probe = cpcusb_probe,
- .disconnect = cpcusb_disconnect,
- .id_table = cpcusb_table,
-};
-
-static int cpcusb_create_info_output(char *buf)
-{
- int i = 0, j;
-
- for (j = 0; j < CPC_USB_CARD_CNT; j++) {
- if (CPCUSB_Table[j]) {
- CPC_USB_T *card = CPCUSB_Table[j];
- CPC_CHAN_T *chan = card->chan;
-
- /* MINOR CHANNELNO BUSNO SLOTNO */
- i += sprintf(&buf[i], "%d %s\n", chan->minor,
- card->serialNumber);
- }
- }
-
- return i;
-}
-
-static int cpcusb_proc_read_info(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = cpcusb_create_info_output(page);
-
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
-
- return len;
-}
-
-/*
- * Remove CPC-USB and cleanup
- */
-static inline void cpcusb_delete(CPC_USB_T *card)
-{
- if (card) {
- if (card->chan) {
- if (card->chan->buf)
- vfree(card->chan->buf);
-
- if (card->chan->CPCWait_q)
- kfree(card->chan->CPCWait_q);
-
- kfree(card->chan);
- }
-
- CPCUSB_Table[card->idx] = NULL;
- kfree(card);
- }
-}
-
-/*
- * setup the interrupt IN endpoint of a specific CPC-USB device
- */
-static int cpcusb_setup_intrep(CPC_USB_T *card)
-{
- int retval = 0;
- struct usb_endpoint_descriptor *ep;
-
- ep = &card->interface->altsetting[0].endpoint[card->num_intr_in].desc;
-
- card->intr_in_buffer[0] = 0;
- card->free_slots = 15; /* initial size */
-
- /* setup the urb */
- usb_fill_int_urb(card->intr_in_urb, card->udev,
- usb_rcvintpipe(card->udev, card->num_intr_in),
- card->intr_in_buffer,
- sizeof(card->intr_in_buffer),
- cpcusb_read_interrupt_callback,
- card,
- ep->bInterval);
-
- card->intr_in_urb->status = 0; /* needed! */
-
- /* submit the urb */
- retval = usb_submit_urb(card->intr_in_urb, GFP_KERNEL);
-
- if (retval)
- err("%s - failed submitting intr urb, error %d", __func__,
- retval);
-
- return retval;
-}
-
-static int cpcusb_open(struct inode *inode, struct file *file)
-{
- CPC_USB_T *card = NULL;
- struct usb_interface *interface;
- int subminor;
- int j, retval = 0;
-
- subminor = iminor(inode);
-
- /* prevent disconnects */
- down(&disconnect_sem);
-
- interface = usb_find_interface(&cpcusb_driver, subminor);
- if (!interface) {
- err("%s - error, can't find device for minor %d",
- __func__, subminor);
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_no_device;
- }
-
- card = usb_get_intfdata(interface);
- if (!card) {
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_no_device;
- }
-
- /* lock this device */
- down(&card->sem);
-
- /* increment our usage count for the driver */
- if (card->open) {
- dbg("device already opened");
- retval = CPC_ERR_CHANNEL_ALREADY_OPEN;
- goto exit_on_error;
- }
-
- /* save our object in the file's private structure */
- file->private_data = card;
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_fill_bulk_urb(card->urbs[j].urb, card->udev,
- usb_rcvbulkpipe(card->udev, card->num_bulk_in),
- card->urbs[j].buffer, card->urbs[j].size,
- cpcusb_read_bulk_callback, card);
-
- retval = usb_submit_urb(card->urbs[j].urb, GFP_KERNEL);
-
- if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
- retval = CPC_ERR_TRANSMISSION_FAILED;
- goto exit_on_error;
- }
- }
-
- info("%s - %d URB's submitted", __func__, j);
-
- ResetBuffer(card->chan);
-
- cpcusb_setup_intrep(card);
- card->open = 1;
-
- atomic_inc(&useCount);
-
-exit_on_error:
- /* unlock this device */
- up(&card->sem);
-
-exit_no_device:
- up(&disconnect_sem);
-
- return retval;
-}
-
-static unsigned int cpcusb_poll(struct file *file, poll_table * wait)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- unsigned int retval = 0;
-
- if (!card) {
- err("%s - device object lost", __func__);
- return -EIO;
- }
-
- poll_wait(file, card->chan->CPCWait_q, wait);
-
- if (IsBufferNotEmpty(card->chan) || !(card->present))
- retval |= (POLLIN | POLLRDNORM);
-
- if (card->free_slots)
- retval |= (POLLOUT | POLLWRNORM);
-
- return retval;
-}
-
-static int cpcusb_release(struct inode *inode, struct file *file)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- int j, retval = 0;
-
- if (card == NULL) {
- dbg("%s - object is NULL", __func__);
- return CPC_ERR_NO_INTERFACE_PRESENT;
- }
-
- /* lock our device */
- down(&card->sem);
-
- if (!card->open) {
- dbg("%s - device not opened", __func__);
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_not_opened;
- }
-
- /* if device wasn't unplugged kill all urbs */
- if (card->present) {
- /* kill read urbs */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_kill_urb(card->urbs[j].urb);
- }
-
- /* kill irq urb */
- usb_kill_urb(card->intr_in_urb);
-
- /* kill write urbs */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (atomic_read(&card->wrUrbs[j].busy)) {
- usb_kill_urb(card->wrUrbs[j].urb);
- wait_for_completion(&card->wrUrbs[j].finished);
- }
- }
- }
-
- atomic_dec(&useCount);
-
- /* last process detached */
- if (atomic_read(&useCount) == 0) {
- wake_up(&rmmodWq);
- }
-
- if (!card->present && card->open) {
- /* the device was unplugged before the file was released */
- up(&card->sem);
- cpcusb_delete(card);
- return 0;
- }
-
- card->open = 0;
-
-exit_not_opened:
- up(&card->sem);
-
- return 0;
-}
-
-static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- CPC_CHAN_T *chan;
- int retval = 0;
-
- if (count < sizeof(CPC_MSG_T))
- return CPC_ERR_UNKNOWN;
-
- /* check if can read from the given address */
- if (!access_ok(VERIFY_WRITE, buffer, count))
- return CPC_ERR_UNKNOWN;
-
- /* lock this object */
- down(&card->sem);
-
- /* verify that the device wasn't unplugged */
- if (!card->present) {
- up(&card->sem);
- return CPC_ERR_NO_INTERFACE_PRESENT;
- }
-
- if (IsBufferEmpty(card->chan)) {
- retval = 0;
- } else {
- chan = card->chan;
-
-#if 0
- /* convert LPC2119 params back to SJA1000 params */
- if (card->deviceRevision >= 0x0200
- && chan->buf[chan->oidx].type == CPC_MSG_T_CAN_PRMS) {
- LPC2119_TO_SJA1000_Params(&chan->buf[chan->oidx]);
- }
-#endif
-
- if (copy_to_user(buffer, &chan->buf[chan->oidx], count) != 0) {
- retval = CPC_ERR_IO_TRANSFER;
- } else {
- chan->oidx = (chan->oidx + 1) % CPC_MSG_BUF_CNT;
- chan->WnR = 1;
- retval = sizeof(CPC_MSG_T);
- }
- }
-/* spin_unlock_irqrestore(&card->slock, flags); */
-
- /* unlock the device */
- up(&card->sem);
-
- return retval;
-}
-
-#define SHIFT 1
-static inline void cpcusb_align_buffer_alignment(unsigned char *buf)
-{
- /* CPC-USB uploads packed bytes. */
- CPC_MSG_T *cpc = (CPC_MSG_T *) buf;
- unsigned int i;
-
- for (i = 0; i < cpc->length + (2 * sizeof(unsigned long)); i++) {
- ((unsigned char *) &cpc->msgid)[1 + i] =
- ((unsigned char *) &cpc->msgid)[1 + SHIFT + i];
- }
-}
-
-static int cpc_get_buffer_count(CPC_CHAN_T *chan)
-{
- /* check the buffer parameters */
- if (chan->iidx == chan->oidx)
- return !chan->WnR ? CPC_MSG_BUF_CNT : 0;
- else if (chan->iidx >= chan->oidx)
- return (chan->iidx - chan->oidx) % CPC_MSG_BUF_CNT;
-
- return (chan->iidx + CPC_MSG_BUF_CNT - chan->oidx) % CPC_MSG_BUF_CNT;
-}
-
-static ssize_t cpcusb_write(struct file *file, const char *buffer,
- size_t count, loff_t *ppos)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- CPC_USB_WRITE_URB_T *wrUrb = NULL;
-
- ssize_t bytes_written = 0;
- int retval = 0;
- int j;
-
- unsigned char *obuf = NULL;
- unsigned char type = 0;
- CPC_MSG_T *info = NULL;
-
- dbg("%s - entered minor %d, count = %zu, present = %d",
- __func__, card->minor, count, card->present);
-
- if (count > sizeof(CPC_MSG_T))
- return CPC_ERR_UNKNOWN;
-
- /* check if can read from the given address */
- if (!access_ok(VERIFY_READ, buffer, count))
- return CPC_ERR_UNKNOWN;
-
- /* lock this object */
- down(&card->sem);
-
- /* verify that the device wasn't unplugged */
- if (!card->present) {
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit;
- }
-
- /* verify that we actually have some data to write */
- if (count == 0) {
- dbg("%s - write request of 0 bytes", __func__);
- goto exit;
- }
-
- if (card->free_slots <= 5) {
- info = (CPC_MSG_T *) buffer;
-
- if (info->type != CPC_CMD_T_CLEAR_CMD_QUEUE
- || card->free_slots <= 0) {
- dbg("%s - send buffer full please try again %d",
- __func__, card->free_slots);
- retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
- goto exit;
- }
- }
-
- /* Find a free write urb */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (!atomic_read(&card->wrUrbs[j].busy)) {
- wrUrb = &card->wrUrbs[j]; /* remember found URB */
- atomic_set(&wrUrb->busy, 1); /* lock this URB */
- init_completion(&wrUrb->finished); /* init completion */
- dbg("WR URB no. %d started", j);
- break;
- }
- }
-
- /* don't found write urb say error */
- if (!wrUrb) {
- dbg("%s - no free send urb available", __func__);
- retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
- goto exit;
- }
- dbg("URB write req");
-
- obuf = (unsigned char *) wrUrb->urb->transfer_buffer;
-
- /* copy the data from userspace into our transfer buffer;
- * this is the only copy required.
- */
- if (copy_from_user(&obuf[4], buffer, count) != 0) {
- atomic_set(&wrUrb->busy, 0); /* release urb */
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- /* check if it is a DRIVER information message, so we can
- * response to that message and not the USB
- */
- info = (CPC_MSG_T *) &obuf[4];
-
- bytes_written = 11 + info->length;
- if (bytes_written >= wrUrb->size) {
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- switch (info->type) {
- case CPC_CMD_T_CLEAR_MSG_QUEUE:
- ResetBuffer(card->chan);
- break;
-
- case CPC_CMD_T_INQ_MSG_QUEUE_CNT:
- retval = cpc_get_buffer_count(card->chan);
- atomic_set(&wrUrb->busy, 0);
-
- goto exit;
-
- case CPC_CMD_T_INQ_INFO:
- if (info->msg.info.source == CPC_INFOMSG_T_DRIVER) {
- /* release urb cause we'll use it for driver
- * information
- */
- atomic_set(&wrUrb->busy, 0);
- if (IsBufferFull(card->chan)) {
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- /* it is a driver information request message and we have
- * free rx slots to store the response
- */
- type = info->msg.info.type;
- info = &card->chan->buf[card->chan->iidx];
-
- info->type = CPC_MSG_T_INFO;
- info->msg.info.source = CPC_INFOMSG_T_DRIVER;
- info->msg.info.type = type;
-
- switch (type) {
- case CPC_INFOMSG_T_VERSION:
- info->length = strlen(CPC_DRIVER_VERSION) + 2;
- sprintf(info->msg.info.msg, "%s\n",
- CPC_DRIVER_VERSION);
- break;
-
- case CPC_INFOMSG_T_SERIAL:
- info->length = strlen(CPC_DRIVER_SERIAL) + 2;
- sprintf(info->msg.info.msg, "%s\n",
- CPC_DRIVER_SERIAL);
- break;
-
- default:
- info->length = 2;
- info->msg.info.type =
- CPC_INFOMSG_T_UNKNOWN_TYPE;
- }
-
- card->chan->WnR = 0;
- card->chan->iidx =
- (card->chan->iidx + 1) % CPC_MSG_BUF_CNT;
-
- retval = info->length;
- goto exit;
- }
- break;
- case CPC_CMD_T_CAN_PRMS:
- /* Check the controller type. If it's the new CPC-USB, make sure if these are SJA1000 params */
- if (info->msg.canparams.cc_type != SJA1000
- && info->msg.canparams.cc_type != M16C_BASIC
- && (card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID
- && info->msg.canparams.cc_type != SJA1000)) {
- /* don't forget to release the urb */
- atomic_set(&wrUrb->busy, 0);
- retval = CPC_ERR_WRONG_CONTROLLER_TYPE;
- goto exit;
- }
- break;
- }
-
- /* just convert the params if it is an old CPC-USB with M16C controller */
- if (card->productId == USB_CPCUSB_M16C_PRODUCT_ID) {
- /* if it is a parameter message convert it from SJA1000 controller
- * settings to M16C Basic controller settings
- */
- SJA1000_TO_M16C_BASIC_Params((CPC_MSG_T *) &obuf[4]);
- }
-
- /* don't forget the byte alignment */
- cpcusb_align_buffer_alignment(&obuf[4]);
-
- /* setup a the 4 byte header */
- obuf[0] = obuf[1] = obuf[2] = obuf[3] = 0;
-
- /* this urb was already set up, except for this write size */
- wrUrb->urb->transfer_buffer_length = bytes_written + 4;
-
- /* send the data out the bulk port */
- /* a character device write uses GFP_KERNEL,
- unless a spinlock is held */
- retval = usb_submit_urb(wrUrb->urb, GFP_KERNEL);
- if (retval) {
- atomic_set(&wrUrb->busy, 0); /* release urb */
- err("%s - failed submitting write urb, error %d",
- __func__, retval);
- } else {
- retval = bytes_written;
- }
-
-exit:
- /* unlock the device */
- up(&card->sem);
-
- dbg("%s - leaved", __func__);
-
- return retval;
-}
-
-/*
- * callback for interrupt IN urb
- */
-static void cpcusb_read_interrupt_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- int retval;
- unsigned long flags;
-
- spin_lock_irqsave(&card->slock, flags);
-
- if (!card->present) {
- spin_unlock_irqrestore(&card->slock, flags);
- info("%s - no such device", __func__);
- return;
- }
-
- switch (urb->status) {
- case 0: /* success */
- card->free_slots = card->intr_in_buffer[1];
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - intr urb killed", __func__);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval) {
- err("%s - failed resubmitting intr urb, error %d",
- __func__, retval);
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
- wake_up_interruptible(card->chan->CPCWait_q);
-
- return;
-}
-
-#define UN_SHIFT 1
-#define CPCMSG_HEADER_LEN_FIRMWARE 11
-static inline int cpcusb_unalign_and_copy_buffy(unsigned char *out,
- unsigned char *in)
-{
- unsigned int i, j;
-
- for (i = 0; i < 3; i++)
- out[i] = in[i];
-
- for (j = 0; j < (in[1] + (CPCMSG_HEADER_LEN_FIRMWARE - 3)); j++)
- out[j + i + UN_SHIFT] = in[j + i];
-
- return i + j;
-}
-
-/*
- * callback for bulk IN urb
- */
-static void cpcusb_read_bulk_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- CPC_CHAN_T *chan;
- unsigned char *ibuf = urb->transfer_buffer;
- int retval, msgCnt, start, again = 0;
- unsigned long flags;
-
- if (!card) {
- err("%s - device object lost", __func__);
- return;
- }
-
- spin_lock_irqsave(&card->slock, flags);
-
- if (!card->present) {
- spin_unlock_irqrestore(&card->slock, flags);
- info("%s - no such device", __func__);
- return;
- }
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - read urb killed", __func__);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- if (urb->actual_length) {
- msgCnt = ibuf[0] & ~0x80;
- again = ibuf[0] & 0x80;
-
- /* we have a 4 byte header */
- start = 4;
- chan = card->chan;
- while (msgCnt) {
- if (!(IsBufferFull(card->chan))) {
- start +=
- cpcusb_unalign_and_copy_buffy((unsigned char *)
- &chan->buf[chan->iidx], &ibuf[start]);
-
- if (start > urb->transfer_buffer_length) {
- err("%d > %d", start, urb->transfer_buffer_length);
- break;
- }
-
- chan->WnR = 0;
- chan->iidx = (chan->iidx + 1) % CPC_MSG_BUF_CNT;
- msgCnt--;
- } else {
- break;
- }
- }
- }
-
- usb_fill_bulk_urb(urb, card->udev,
- usb_rcvbulkpipe(card->udev, card->num_bulk_in),
- urb->transfer_buffer,
- urb->transfer_buffer_length,
- cpcusb_read_bulk_callback, card);
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
-
- if (retval) {
- err("%s - failed resubmitting read urb, error %d", __func__, retval);
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
-
- wake_up_interruptible(card->chan->CPCWait_q);
-}
-
-/*
- * callback for bulk IN urb
- */
-static void cpcusb_write_bulk_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- unsigned long flags;
- int j;
-
- spin_lock_irqsave(&card->slock, flags);
-
- /* find this urb */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (card->wrUrbs[j].urb == urb) {
- dbg("URB found no. %d", j);
- /* notify anyone waiting that the write has finished */
- complete(&card->wrUrbs[j].finished);
- atomic_set(&card->wrUrbs[j].busy, 0);
- break;
- }
- }
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - write urb no. %d killed", __func__, j);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
-
- wake_up_interruptible(card->chan->CPCWait_q);
-}
-
-static inline int cpcusb_get_free_slot(void)
-{
- int i;
-
- for (i = 0; i < CPC_USB_CARD_CNT; i++) {
- if (!CPCUSB_Table[i])
- return i;
- }
-
- return -1;
-}
-
-/*
- * probe function for new CPC-USB devices
- */
-static int cpcusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- CPC_USB_T *card = NULL;
- CPC_CHAN_T *chan = NULL;
-
- struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint;
-
- int i, j, retval = -ENOMEM, slot;
-
- slot = cpcusb_get_free_slot();
- if (slot < 0) {
- info("No more devices supported");
- return -ENOMEM;
- }
-
- /* allocate memory for our device state and initialize it */
- card = kzalloc(sizeof(CPC_USB_T), GFP_KERNEL);
- if (!card) {
- err("Out of memory");
- return -ENOMEM;
- }
- CPCUSB_Table[slot] = card;
-
- /* allocate and initialize the channel struct */
- card->chan = kmalloc(sizeof(CPC_CHAN_T), GFP_KERNEL);
- if (!card->chan) {
- kfree(card);
- err("Out of memory");
- return -ENOMEM;
- }
-
- chan = card->chan;
- memset(chan, 0, sizeof(CPC_CHAN_T));
- ResetBuffer(chan);
-
- init_MUTEX(&card->sem);
- spin_lock_init(&card->slock);
-
- card->udev = udev;
- card->interface = interface;
- if (udev->descriptor.iSerialNumber) {
- usb_string(udev, udev->descriptor.iSerialNumber, card->serialNumber,
- 128);
- info("Serial %s", card->serialNumber);
- }
-
- card->productId = udev->descriptor.idProduct;
- info("Product %s",
- card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID ?
- "CPC-USB/ARM7" : "CPC-USB/M16C");
-
- /* set up the endpoint information */
- /* check out the endpoints */
- /* use only the first bulk-in and bulk-out endpoints */
- iface_desc = &interface->altsetting[0];
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (!card->num_intr_in &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
- card->intr_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- card->num_intr_in = 1;
-
- if (!card->intr_in_urb) {
- err("No free urbs available");
- goto error;
- }
-
- dbg("intr_in urb %d", card->num_intr_in);
- }
-
- if (!card->num_bulk_in &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
- card->num_bulk_in = 2;
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- card->urbs[j].size = endpoint->wMaxPacketSize;
- card->urbs[j].urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!card->urbs[j].urb) {
- err("No free urbs available");
- goto error;
- }
- card->urbs[j].buffer =
- usb_buffer_alloc(udev,
- card->urbs[j].size,
- GFP_KERNEL,
- &card->urbs[j].urb->transfer_dma);
- if (!card->urbs[j].buffer) {
- err("Couldn't allocate bulk_in_buffer");
- goto error;
- }
- }
- info("%s - %d reading URB's allocated",
- __func__, CPC_USB_URB_CNT);
- }
-
- if (!card->num_bulk_out &&
- !(endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
-
- card->num_bulk_out = 2;
-
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- card->wrUrbs[j].size =
- endpoint->wMaxPacketSize;
- card->wrUrbs[j].urb =
- usb_alloc_urb(0, GFP_KERNEL);
- if (!card->wrUrbs[j].urb) {
- err("No free urbs available");
- goto error;
- }
- card->wrUrbs[j].buffer = usb_buffer_alloc(udev,
- card->wrUrbs[j].size, GFP_KERNEL,
- &card->wrUrbs[j].urb->transfer_dma);
-
- if (!card->wrUrbs[j].buffer) {
- err("Couldn't allocate bulk_out_buffer");
- goto error;
- }
-
- usb_fill_bulk_urb(card->wrUrbs[j].urb, udev,
- usb_sndbulkpipe(udev, endpoint->bEndpointAddress),
- card->wrUrbs[j].buffer,
- card->wrUrbs[j].size,
- cpcusb_write_bulk_callback,
- card);
- }
-
- info("%s - %d writing URB's allocated", __func__, CPC_USB_URB_CNT);
- }
- }
-
- if (!(card->num_bulk_in && card->num_bulk_out)) {
- err("Couldn't find both bulk-in and bulk-out endpoints");
- goto error;
- }
-
- /* allow device read, write and ioctl */
- card->present = 1;
-
- /* we can register the device now, as it is ready */
- usb_set_intfdata(interface, card);
- retval = usb_register_dev(interface, &cpcusb_class);
-
- if (retval) {
- /* something prevented us from registering this driver */
- err("Not able to get a minor for this device.");
- usb_set_intfdata(interface, NULL);
- goto error;
- }
-
- card->chan->minor = card->minor = interface->minor;
-
- chan->buf = vmalloc(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
- if (chan->buf == NULL) {
- err("Out of memory");
- retval = -ENOMEM;
- goto error;
- }
- info("Allocated memory for %d messages (%lu kbytes)",
- CPC_MSG_BUF_CNT, (long unsigned int)(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT) / 1000);
- memset(chan->buf, 0, sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
-
- ResetBuffer(chan);
-
- card->chan->CPCWait_q = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
- if (!card->chan->CPCWait_q) {
- err("Out of memory");
- retval = -ENOMEM;
- goto error;
- }
- init_waitqueue_head(card->chan->CPCWait_q);
-
- CPCUSB_Table[slot] = card;
- card->idx = slot;
- CPCUsbCnt++;
-
- /* let the user know what node this device is now attached to */
- info("Device now attached to USB-%d", card->minor);
- return 0;
-
-error:
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (card->urbs[j].buffer) {
- usb_buffer_free(card->udev, card->urbs[j].size,
- card->urbs[j].buffer,
- card->urbs[j].urb->transfer_dma);
- card->urbs[j].buffer = NULL;
- }
- if (card->urbs[j].urb) {
- usb_free_urb(card->urbs[j].urb);
- card->urbs[j].urb = NULL;
- }
- }
-
- cpcusb_delete(card);
- return retval;
-}
-
-/*
- * called by the usb core when the device is removed from the system
- */
-static void cpcusb_disconnect(struct usb_interface *interface)
-{
- CPC_USB_T *card = NULL;
- int minor, j;
-
- /* prevent races with open() */
- down(&disconnect_sem);
-
- card = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
-
- down(&card->sem);
-
- /* prevent device read, write and ioctl */
- card->present = 0;
-
- minor = card->minor;
-
- /* free all urbs and their buffers */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- /* terminate an ongoing write */
- if (atomic_read(&card->wrUrbs[j].busy)) {
- usb_kill_urb(card->wrUrbs[j].urb);
- wait_for_completion(&card->wrUrbs[j].finished);
- }
- usb_buffer_free(card->udev, card->wrUrbs[j].size,
- card->wrUrbs[j].buffer,
- card->wrUrbs[j].urb->transfer_dma);
- usb_free_urb(card->wrUrbs[j].urb);
- }
- info("%d write URBs freed", CPC_USB_URB_CNT);
-
- /* free all urbs and their buffers */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_buffer_free(card->udev, card->urbs[j].size,
- card->urbs[j].buffer,
- card->urbs[j].urb->transfer_dma);
- usb_free_urb(card->urbs[j].urb);
- }
- info("%d read URBs freed", CPC_USB_URB_CNT);
- usb_free_urb(card->intr_in_urb);
-
- /* give back our minor */
- usb_deregister_dev(interface, &cpcusb_class);
-
- up(&card->sem);
-
- /* if the device is opened, cpcusb_release will clean this up */
- if (!card->open)
- cpcusb_delete(card);
- else
- wake_up_interruptible(card->chan->CPCWait_q);
-
- up(&disconnect_sem);
-
- CPCUsbCnt--;
- info("USB-%d now disconnected", minor);
-}
-
-static int __init CPCUsb_Init(void)
-{
- int result, i;
-
- info(DRIVER_DESC " v" DRIVER_VERSION);
- info("Build on " __DATE__ " at " __TIME__);
-
- for (i = 0; i < CPC_USB_CARD_CNT; i++)
- CPCUSB_Table[i] = 0;
-
- /* register this driver with the USB subsystem */
- result = usb_register(&cpcusb_driver);
- if (result) {
- err("usb_register failed. Error number %d", result);
- return result;
- }
-
- procDir = proc_mkdir(CPC_USB_PROC_DIR, NULL);
- if (!procDir) {
- err("Could not create proc entry");
- } else {
- procEntry = create_proc_read_entry("info", 0444, procDir,
- cpcusb_proc_read_info,
- NULL);
- if (!procEntry) {
- err("Could not create proc entry %s", CPC_USB_PROC_DIR "/info");
- remove_proc_entry(CPC_USB_PROC_DIR, NULL);
- procDir = NULL;
- }
- }
-
- return 0;
-}
-
-static void __exit CPCUsb_Exit(void)
-{
- wait_event(rmmodWq, !atomic_read(&useCount));
-
- /* deregister this driver with the USB subsystem */
- usb_deregister(&cpcusb_driver);
-
- if (procDir) {
- if (procEntry)
- remove_proc_entry("info", procDir);
- remove_proc_entry(CPC_USB_PROC_DIR, NULL);
- }
-}
-
-module_init(CPCUsb_Init);
-module_exit(CPCUsb_Exit);
diff --git a/drivers/staging/cpc-usb/cpc.h b/drivers/staging/cpc-usb/cpc.h
deleted file mode 100644
index b2fda5d..0000000
--- a/drivers/staging/cpc-usb/cpc.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * CPC CAN Interface Definitions
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef CPC_HEADER
-#define CPC_HEADER
-
-/*
- * the maximum length of the union members within a CPC_MSG
- * this value can be defined by the customer, but has to be
- * >= 64 bytes
- * however, if not defined before, we set a length of 64 byte
- */
-#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64)
-#undef CPC_MSG_LEN
-#define CPC_MSG_LEN 64
-#endif
-
-/*
- * Transmission of events from CPC interfaces to PC can be individually
- * controlled per event type. Default state is: don't transmit
- * Control values are constructed by bit-or of Subject and Action
- * and passed to CPC_Control()
- */
-
-/* Control-Values for CPC_Control() Command Subject Selection */
-#define CONTR_CAN_Message 0x04
-#define CONTR_Busload 0x08
-#define CONTR_CAN_State 0x0C
-#define CONTR_SendAck 0x10
-#define CONTR_Filter 0x14
-#define CONTR_CmdQueue 0x18 /* reserved, do not use */
-#define CONTR_BusError 0x1C
-
-/* Control Command Actions */
-#define CONTR_CONT_OFF 0
-#define CONTR_CONT_ON 1
-#define CONTR_SING_ON 2
-/*
- * CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
- * read as: transmit at least once
- */
-
-/* defines for confirmed request */
-#define DO_NOT_CONFIRM 0
-#define DO_CONFIRM 1
-
-/* event flags */
-#define EVENT_READ 0x01
-#define EVENT_WRITE 0x02
-
-/*
- * Messages from CPC to PC contain a message object type field.
- * The following message types are sent by CPC and can be used in
- * handlers, others should be ignored.
- */
-#define CPC_MSG_T_RESYNC 0 /* Normally to be ignored */
-#define CPC_MSG_T_CAN 1 /* CAN data frame */
-#define CPC_MSG_T_BUSLOAD 2 /* Busload message */
-#define CPC_MSG_T_STRING 3 /* Normally to be ignored */
-#define CPC_MSG_T_CONTI 4 /* Normally to be ignored */
-#define CPC_MSG_T_MEM 7 /* Normally not to be handled */
-#define CPC_MSG_T_RTR 8 /* CAN remote frame */
-#define CPC_MSG_T_TXACK 9 /* Send acknowledge */
-#define CPC_MSG_T_POWERUP 10 /* Power-up message */
-#define CPC_MSG_T_CMD_NO 11 /* Normally to be ignored */
-#define CPC_MSG_T_CAN_PRMS 12 /* Actual CAN parameters */
-#define CPC_MSG_T_ABORTED 13 /* Command aborted message */
-#define CPC_MSG_T_CANSTATE 14 /* CAN state message */
-#define CPC_MSG_T_RESET 15 /* used to reset CAN-Controller */
-#define CPC_MSG_T_XCAN 16 /* XCAN data frame */
-#define CPC_MSG_T_XRTR 17 /* XCAN remote frame */
-#define CPC_MSG_T_INFO 18 /* information strings */
-#define CPC_MSG_T_CONTROL 19 /* used for control of interface/driver behaviour */
-#define CPC_MSG_T_CONFIRM 20 /* response type for confirmed requests */
-#define CPC_MSG_T_OVERRUN 21 /* response type for overrun conditions */
-#define CPC_MSG_T_KEEPALIVE 22 /* response type for keep alive conditions */
-#define CPC_MSG_T_CANERROR 23 /* response type for bus error conditions */
-#define CPC_MSG_T_DISCONNECTED 24 /* response type for a disconnected interface */
-#define CPC_MSG_T_ERR_COUNTER 25 /* RX/TX error counter of CAN controller */
-
-#define CPC_MSG_T_FIRMWARE 100 /* response type for USB firmware download */
-
-/*
- * Messages from the PC to the CPC interface contain a command field
- * Most of the command types are wrapped by the library functions and have therefore
- * normally not to be used.
- * However, programmers who wish to circumvent the library and talk directly
- * to the drivers (mainly Linux programmers) can use the following
- * command types:
- */
-#define CPC_CMD_T_CAN 1 /* CAN data frame */
-#define CPC_CMD_T_CONTROL 3 /* used for control of interface/driver behaviour */
-#define CPC_CMD_T_CAN_PRMS 6 /* set CAN parameters */
-#define CPC_CMD_T_CLEARBUF 8 /* clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead */
-#define CPC_CMD_T_INQ_CAN_PARMS 11 /* inquire actual CAN parameters */
-#define CPC_CMD_T_FILTER_PRMS 12 /* set filter parameter */
-#define CPC_CMD_T_RTR 13 /* CAN remote frame */
-#define CPC_CMD_T_CANSTATE 14 /* CAN state message */
-#define CPC_CMD_T_XCAN 15 /* XCAN data frame */
-#define CPC_CMD_T_XRTR 16 /* XCAN remote frame */
-#define CPC_CMD_T_RESET 17 /* used to reset CAN-Controller */
-#define CPC_CMD_T_INQ_INFO 18 /* miscellanous information strings */
-#define CPC_CMD_T_OPEN_CHAN 19 /* open a channel */
-#define CPC_CMD_T_CLOSE_CHAN 20 /* close a channel */
-#define CPC_CMD_T_CNTBUF 21 /* this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead */
-#define CPC_CMD_T_CAN_EXIT 200 /* exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1) */
-
-#define CPC_CMD_T_INQ_MSG_QUEUE_CNT CPC_CMD_T_CNTBUF /* inquires the count of elements in the message queue */
-#define CPC_CMD_T_INQ_ERR_COUNTER 25 /* request the CAN controllers error counter */
-#define CPC_CMD_T_CLEAR_MSG_QUEUE CPC_CMD_T_CLEARBUF /* clear CPC_MSG queue */
-#define CPC_CMD_T_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
-#define CPC_CMD_T_FIRMWARE 100 /* reserved, must not be used */
-#define CPC_CMD_T_USB_RESET 101 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_NOTIFY 102 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_SETUP 103 /* reserved, must not be used */
-#define CPC_CMD_T_ABORT 255 /* Normally not to be used */
-
-/* definitions for CPC_MSG_T_INFO information sources */
-#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0
-#define CPC_INFOMSG_T_INTERFACE 1
-#define CPC_INFOMSG_T_DRIVER 2
-#define CPC_INFOMSG_T_LIBRARY 3
-
-/* information types */
-#define CPC_INFOMSG_T_UNKNOWN_TYPE 0
-#define CPC_INFOMSG_T_VERSION 1
-#define CPC_INFOMSG_T_SERIAL 2
-
-/* definitions for controller types */
-#define PCA82C200 1 /* Philips basic CAN controller, replaced by SJA1000 */
-#define SJA1000 2 /* Philips basic CAN controller */
-#define AN82527 3 /* Intel full CAN controller */
-#define M16C_BASIC 4 /* M16C controller running in basic CAN (not full CAN) mode */
-
-/* channel open error codes */
-#define CPC_ERR_NO_FREE_CHANNEL -1 /* no more free space within the channel array */
-#define CPC_ERR_CHANNEL_ALREADY_OPEN -2 /* the channel is already open */
-#define CPC_ERR_CHANNEL_NOT_ACTIVE -3 /* access to a channel not active failed */
-#define CPC_ERR_NO_DRIVER_PRESENT -4 /* no driver at the location searched by the library */
-#define CPC_ERR_NO_INIFILE_PRESENT -5 /* the library could not find the inifile */
-#define CPC_ERR_WRONG_PARAMETERS -6 /* wrong parameters in the inifile */
-#define CPC_ERR_NO_INTERFACE_PRESENT -7 /* 1. The specified interface is not connected */
- /* 2. The interface (mostly CPC-USB) was disconnected upon operation */
-#define CPC_ERR_NO_MATCHING_CHANNEL -8 /* the driver couldn't find a matching channel */
-#define CPC_ERR_NO_BUFFER_AVAILABLE -9 /* the driver couldn't allocate buffer for messages */
-#define CPC_ERR_NO_INTERRUPT -10 /* the requested interrupt couldn't be claimed */
-#define CPC_ERR_NO_MATCHING_INTERFACE -11 /* no interface type related to this channel was found */
-#define CPC_ERR_NO_RESOURCES -12 /* the requested resources could not be claimed */
-#define CPC_ERR_SOCKET -13 /* error concerning TCP sockets */
-
-/* init error codes */
-#define CPC_ERR_WRONG_CONTROLLER_TYPE -14 /* wrong CAN controller type within initialization */
-#define CPC_ERR_NO_RESET_MODE -15 /* the controller could not be set into reset mode */
-#define CPC_ERR_NO_CAN_ACCESS -16 /* the CAN controller could not be accessed */
-
-/* transmit error codes */
-#define CPC_ERR_CAN_WRONG_ID -20 /* the provided CAN id is too big */
-#define CPC_ERR_CAN_WRONG_LENGTH -21 /* the provided CAN length is too long */
-#define CPC_ERR_CAN_NO_TRANSMIT_BUF -22 /* the transmit buffer was occupied */
-#define CPC_ERR_CAN_TRANSMIT_TIMEOUT -23 /* The message could not be sent within a */
- /* specified time */
-
-/* other error codes */
-#define CPC_ERR_SERVICE_NOT_SUPPORTED -30 /* the requested service is not supported by the interface */
-#define CPC_ERR_IO_TRANSFER -31 /* a transmission error down to the driver occurred */
-#define CPC_ERR_TRANSMISSION_FAILED -32 /* a transmission error down to the interface occurred */
-#define CPC_ERR_TRANSMISSION_TIMEOUT -33 /* a timeout occurred within transmission to the interface */
-#define CPC_ERR_OP_SYS_NOT_SUPPORTED -35 /* the operating system is not supported */
-#define CPC_ERR_UNKNOWN -40 /* an unknown error ocurred (mostly IOCTL errors) */
-
-#define CPC_ERR_LOADING_DLL -50 /* the library 'cpcwin.dll' could not be loaded */
-#define CPC_ERR_ASSIGNING_FUNCTION -51 /* the specified function could not be assigned */
-#define CPC_ERR_DLL_INITIALIZATION -52 /* the DLL was not initialized correctly */
-#define CPC_ERR_MISSING_LICFILE -55 /* the file containing the licenses does not exist */
-#define CPC_ERR_MISSING_LICENSE -56 /* a required license was not found */
-
-/* CAN state bit values. Ignore any bits not listed */
-#define CPC_CAN_STATE_BUSOFF 0x80
-#define CPC_CAN_STATE_ERROR 0x40
-
-/* Mask to help ignore undefined bits */
-#define CPC_CAN_STATE_MASK 0xc0
-
-/*
- * CAN-Message representation in a CPC_MS
- * Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
- * or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
- */
-typedef struct CPC_CAN_MSG {
- u32 id;
- u8 length;
- u8 msg[8];
-} CPC_CAN_MSG_T;
-
-/* representation of the CAN parameters for the PCA82C200 controller */
-typedef struct CPC_PCA82C200_PARAMS {
- u8 acc_code; /* Acceptance-code for receive, Standard: 0 */
- u8 acc_mask; /* Acceptance-mask for receive, Standard: 0xff (everything) */
- u8 btr0; /* Bus-timing register 0 */
- u8 btr1; /* Bus-timing register 1 */
- u8 outp_contr; /* Output-control register */
-} CPC_PCA82C200_PARAMS_T;
-
-/* representation of the CAN parameters for the SJA1000 controller */
-typedef struct CPC_SJA1000_PARAMS {
- u8 mode; /* enables single or dual acceptance filtering */
- u8 acc_code0; /* Acceptance-code for receive, Standard: 0 */
- u8 acc_code1;
- u8 acc_code2;
- u8 acc_code3;
- u8 acc_mask0; /* Acceptance-mask for receive, Standard: 0xff (everything) */
- u8 acc_mask1;
- u8 acc_mask2;
- u8 acc_mask3;
- u8 btr0; /* Bus-timing register 0 */
- u8 btr1; /* Bus-timing register 1 */
- u8 outp_contr; /* Output-control register */
-} CPC_SJA1000_PARAMS_T;
-
-/*
- * representation of the CAN parameters for the M16C controller
- * in basic CAN mode (means no full CAN)
- */
-typedef struct CPC_M16C_BASIC_PARAMS {
- u8 con0;
- u8 con1;
- u8 ctlr0;
- u8 ctlr1;
- u8 clk;
- u8 acc_std_code0;
- u8 acc_std_code1;
- u8 acc_ext_code0;
- u8 acc_ext_code1;
- u8 acc_ext_code2;
- u8 acc_ext_code3;
- u8 acc_std_mask0;
- u8 acc_std_mask1;
- u8 acc_ext_mask0;
- u8 acc_ext_mask1;
- u8 acc_ext_mask2;
- u8 acc_ext_mask3;
-} CPC_M16C_BASIC_PARAMS_T;
-
-/* CAN params message representation */
-typedef struct CPC_CAN_PARAMS {
- u8 cc_type; /* represents the controller type */
- union {
- CPC_M16C_BASIC_PARAMS_T m16c_basic;
- CPC_SJA1000_PARAMS_T sja1000;
- CPC_PCA82C200_PARAMS_T pca82c200;
- } cc_params;
-} CPC_CAN_PARAMS_T;
-
-/* CHAN init params representation */
-typedef struct CPC_CHAN_PARAMS {
- int fd;
-} CPC_CHAN_PARAMS_T;
-
-/* CAN init params message representation */
-typedef struct CPC_INIT_PARAMS {
- CPC_CHAN_PARAMS_T chanparams;
- CPC_CAN_PARAMS_T canparams;
-} CPC_INIT_PARAMS_T;
-
-/* structure for confirmed message handling */
-typedef struct CPC_CONFIRM {
- u8 result; /* error code */
-} CPC_CONFIRM_T;
-
-/* structure for information requests */
-typedef struct CPC_INFO {
- u8 source; /* interface, driver or library */
- u8 type; /* version or serial number */
- char msg[CPC_MSG_LEN - 2]; /* string holding the requested information */
-} CPC_INFO_T;
-
-/*
- * OVERRUN
- * In general two types of overrun may occur.
- * A hardware overrun, where the CAN controller
- * lost a message, because the interrupt was
- * not handled before the next messgae comes in.
- * Or a software overrun, where i.e. a received
- * message could not be stored in the CPC_MSG
- * buffer.
- */
-
-/* After a software overrun has occurred
- * we wait until we have CPC_OVR_GAP slots
- * free in the CPC_MSG buffer.
- */
-#define CPC_OVR_GAP 10
-
-/*
- * Two types of software overrun may occur.
- * A received CAN message or a CAN state event
- * can cause an overrun.
- * Note: A CPC_CMD which would normally store
- * its result immediately in the CPC_MSG
- * queue may fail, because the message queue is full.
- * This will not generate an overrun message, but
- * will halt command execution, until this command
- * is able to store its message in the message queue.
- */
-#define CPC_OVR_EVENT_CAN 0x01
-#define CPC_OVR_EVENT_CANSTATE 0x02
-#define CPC_OVR_EVENT_BUSERROR 0x04
-
-/*
- * If the CAN controller lost a message
- * we indicate it with the highest bit
- * set in the count field.
- */
-#define CPC_OVR_HW 0x80
-
-/* structure for overrun conditions */
-typedef struct {
- u8 event;
- u8 count;
-} CPC_OVERRUN_T;
-
-/*
- * CAN errors
- * Each CAN controller type has different
- * registers to record errors.
- * Therefor a structure containing the specific
- * errors is set up for each controller here
- */
-
-/*
- * SJA1000 error structure
- * see the SJA1000 datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_SJA1000_CAN_ERROR {
- u8 ecc; /* error capture code register */
- u8 rxerr; /* RX error counter register */
- u8 txerr; /* TX error counter register */
-} CPC_SJA1000_CAN_ERROR_T;
-
-/*
- * M16C error structure
- * see the M16C datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_M16C_CAN_ERROR {
- u8 tbd; /* to be defined */
-} CPC_M16C_CAN_ERROR_T;
-
-/* structure for CAN error conditions */
-#define CPC_CAN_ECODE_ERRFRAME 0x01
-typedef struct CPC_CAN_ERROR {
- u8 ecode;
- struct {
- u8 cc_type; /* CAN controller type */
- union {
- CPC_SJA1000_CAN_ERROR_T sja1000;
- CPC_M16C_CAN_ERROR_T m16c;
- } regs;
- } cc;
-} CPC_CAN_ERROR_T;
-
-/*
- * Structure containing RX/TX error counter.
- * This structure is used to request the
- * values of the CAN controllers TX and RX
- * error counter.
- */
-typedef struct CPC_CAN_ERR_COUNTER {
- u8 rx;
- u8 tx;
-} CPC_CAN_ERR_COUNTER_T;
-
-/* If this flag is set, transmissions from PC to CPC are protected against loss */
-#define CPC_SECURE_TO_CPC 0x01
-
-/* If this flag is set, transmissions from CPC to PC are protected against loss */
-#define CPC_SECURE_TO_PC 0x02
-
-/* If this flag is set, the CAN-transmit buffer is checked to be free before sending a message */
-#define CPC_SECURE_SEND 0x04
-
-/*
- * If this flag is set, the transmission complete flag is checked
- * after sending a message
- * THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
- */
-#define CPC_SECURE_TRANSMIT 0x08
-
-/* main message type used between library and application */
-typedef struct CPC_MSG {
- u8 type; /* type of message */
- u8 length; /* length of data within union 'msg' */
- u8 msgid; /* confirmation handle */
- u32 ts_sec; /* timestamp in seconds */
- u32 ts_nsec; /* timestamp in nano seconds */
- union {
- u8 generic[CPC_MSG_LEN];
- CPC_CAN_MSG_T canmsg;
- CPC_CAN_PARAMS_T canparams;
- CPC_CONFIRM_T confirmation;
- CPC_INFO_T info;
- CPC_OVERRUN_T overrun;
- CPC_CAN_ERROR_T error;
- CPC_CAN_ERR_COUNTER_T err_counter;
- u8 busload;
- u8 canstate;
- } msg;
-} CPC_MSG_T;
-
-#endif /* CPC_HEADER */
diff --git a/drivers/staging/cpc-usb/cpc_int.h b/drivers/staging/cpc-usb/cpc_int.h
deleted file mode 100644
index 38674e9..0000000
--- a/drivers/staging/cpc-usb/cpc_int.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * CPCLIB
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-#ifndef CPC_INT_H
-#define CPC_INT_H
-
-#include <linux/wait.h>
-
-#define CPC_MSG_BUF_CNT 1500
-
-#define CPC_PROC_DIR "driver/"
-
-#undef dbg
-#undef err
-#undef info
-
-/* Use our own dbg macro */
-#define dbg(format, arg...) do { if (debug) printk( KERN_INFO format "\n" , ## arg); } while (0)
-#define err(format, arg...) do { printk( KERN_INFO "ERROR " format "\n" , ## arg); } while (0)
-#define info(format, arg...) do { printk( KERN_INFO format "\n" , ## arg); } while (0)
-
-/* Macros help using of our buffers */
-#define IsBufferFull(x) (!(x)->WnR) && ((x)->iidx == (x)->oidx)
-#define IsBufferEmpty(x) ((x)->WnR) && ((x)->iidx == (x)->oidx)
-#define IsBufferNotEmpty(x) (!(x)->WnR) || ((x)->iidx != (x)->oidx)
-#define ResetBuffer(x) do { (x)->oidx = (x)->iidx=0; (x)->WnR = 1; } while(0);
-
-#define CPC_BufWriteAllowed ((chan->oidx != chan->iidx) || chan->WnR)
-
-typedef void (*chan_write_byte_t) (void *chan, unsigned int reg,
- unsigned char val);
-typedef unsigned char (*chan_read_byte_t) (void *chan, unsigned int reg);
-
-typedef struct CPC_CHAN {
- void __iomem * canBase; /* base address of SJA1000 */
- chan_read_byte_t read_byte; /* CAN controller read access routine */
- chan_write_byte_t write_byte; /* CAN controller write access routine */
- CPC_MSG_T *buf; /* buffer for CPC msg */
- unsigned int iidx;
- unsigned int oidx;
- unsigned int WnR;
- unsigned int minor;
- unsigned int locked;
- unsigned int irqDisabled;
-
- unsigned char cpcCtrlCANMessage;
- unsigned char cpcCtrlCANState;
- unsigned char cpcCtrlBUSState;
-
- unsigned char controllerType;
-
- unsigned long ovrTimeSec;
- unsigned long ovrTimeNSec;
- unsigned long ovrLockedBuffer;
- CPC_OVERRUN_T ovr;
-
- /* for debugging only */
- unsigned int handledIrqs;
- unsigned int lostMessages;
-
- unsigned int sentStdCan;
- unsigned int sentExtCan;
- unsigned int sentStdRtr;
- unsigned int sentExtRtr;
-
- unsigned int recvStdCan;
- unsigned int recvExtCan;
- unsigned int recvStdRtr;
- unsigned int recvExtRtr;
-
- wait_queue_head_t *CPCWait_q;
-
- void *private;
-} CPC_CHAN_T;
-
-#endif
diff --git a/drivers/staging/cpc-usb/cpcusb.h b/drivers/staging/cpc-usb/cpcusb.h
deleted file mode 100644
index 6bdf30b..0000000
--- a/drivers/staging/cpc-usb/cpcusb.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* Header for CPC-USB Driver ********************
- * Copyright 1999, 2000, 2001
- *
- * Company: EMS Dr. Thomas Wuensche
- * Sonnenhang 3
- * 85304 Ilmmuenster
- * Phone: +49-8441-490260
- * Fax: +49-8441-81860
- * email: support@ems-wuensche.com
- * WWW: www.ems-wuensche.com
- */
-
-#ifndef CPCUSB_H
-#define CPCUSB_H
-
-#undef err
-#undef dbg
-#undef info
-
-/* Use our own dbg macro */
-#define dbg(format, arg...) do { if (debug) printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
-#define info(format, arg...) do { printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
-#define err(format, arg...) do { printk(KERN_INFO "CPC-USB(ERROR): " format "\n" , ## arg); } while (0)
-
-#define CPC_USB_CARD_CNT 4
-
-typedef struct CPC_USB_READ_URB {
- unsigned char *buffer; /* the buffer to send data */
- size_t size; /* the size of the send buffer */
- struct urb *urb; /* the urb used to send data */
-} CPC_USB_READ_URB_T;
-
-typedef struct CPC_USB_WRITE_URB {
- unsigned char *buffer; /* the buffer to send data */
- size_t size; /* the size of the send buffer */
- struct urb *urb; /* the urb used to send data */
- atomic_t busy; /* true if write urb is busy */
- struct completion finished; /* wait for the write to finish */
-} CPC_USB_WRITE_URB_T;
-
-#define CPC_USB_URB_CNT 10
-
-typedef struct CPC_USB {
- struct usb_device *udev; /* save off the usb device pointer */
- struct usb_interface *interface; /* the interface for this device */
- unsigned char minor; /* the starting minor number for this device */
- unsigned char num_ports; /* the number of ports this device has */
- int num_intr_in; /* number of interrupt in endpoints we have */
- int num_bulk_in; /* number of bulk in endpoints we have */
- int num_bulk_out; /* number of bulk out endpoints we have */
-
- CPC_USB_READ_URB_T urbs[CPC_USB_URB_CNT];
-
- unsigned char intr_in_buffer[4]; /* interrupt transfer buffer */
- struct urb *intr_in_urb; /* interrupt transfer urb */
-
- CPC_USB_WRITE_URB_T wrUrbs[CPC_USB_URB_CNT];
-
- int open; /* if the port is open or not */
- int present; /* if the device is not disconnected */
- struct semaphore sem; /* locks this structure */
-
- int free_slots; /* free send slots of CPC-USB */
- int idx;
-
- spinlock_t slock;
-
- char serialNumber[128]; /* serial number */
- int productId; /* product id to differ between M16C and LPC2119 */
- CPC_CHAN_T *chan;
-} CPC_USB_T;
-
-#define CPCTable CPCUSB_Table
-
-#define CPC_DRIVER_VERSION "0.724"
-#define CPC_DRIVER_SERIAL "not applicable"
-
-#define OBUF_SIZE 255 /* 4096 */
-
-/* read timeouts -- RD_NAK_TIMEOUT * RD_EXPIRE = Number of seconds */
-#define RD_NAK_TIMEOUT (10*HZ) /* Default number of X seconds to wait */
-#define RD_EXPIRE 12 /* Number of attempts to wait X seconds */
-
-#define CPC_USB_BASE_MNR 0 /* CPC-USB start at minor 0 */
-
-#endif
diff --git a/drivers/staging/cpc-usb/sja2m16c.h b/drivers/staging/cpc-usb/sja2m16c.h
deleted file mode 100644
index 654bd3f..0000000
--- a/drivers/staging/cpc-usb/sja2m16c.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _SJA2M16C_H
-#define _SJA2M16C_H
-
-#include "cpc.h"
-
-#define BAUDRATE_TOLERANCE_PERCENT 1
-#define SAMPLEPOINT_TOLERANCE_PERCENT 5
-#define SAMPLEPOINT_UPPER_LIMIT 88
-
-/* M16C parameters */
-struct FIELD_C0CONR {
- unsigned int brp:4;
- unsigned int sam:1;
- unsigned int pr:3;
- unsigned int dummy:8;
-};
-struct FIELD_C1CONR {
- unsigned int ph1:3;
- unsigned int ph2:3;
- unsigned int sjw:2;
- unsigned int dummy:8;
-};
-typedef union C0CONR {
- unsigned char c0con;
- struct FIELD_C0CONR bc0con;
-} C0CONR_T;
-typedef union C1CONR {
- unsigned char c1con;
- struct FIELD_C1CONR bc1con;
-} C1CONR_T;
-
-#define SJA_TSEG1 ((pParams->btr1 & 0x0f)+1)
-#define SJA_TSEG2 (((pParams->btr1 & 0x70)>>4)+1)
-#define SJA_BRP ((pParams->btr0 & 0x3f)+1)
-#define SJA_SJW ((pParams->btr0 & 0xc0)>>6)
-#define SJA_SAM ((pParams->btr1 & 0x80)>>7)
-int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2);
-int samplepoint_m16c(int brp, int pr, int ph1, int ph2);
-int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T *pMsg);
-
-#endif
diff --git a/drivers/staging/cpc-usb/sja2m16c_2.c b/drivers/staging/cpc-usb/sja2m16c_2.c
deleted file mode 100644
index bf0230f..0000000
--- a/drivers/staging/cpc-usb/sja2m16c_2.c
+++ /dev/null
@@ -1,452 +0,0 @@
-/****************************************************************************
-*
-* Copyright (c) 2003,2004 by EMS Dr. Thomas Wuensche
-*
-* - All rights reserved -
-*
-* This code is provided "as is" without warranty of any kind, either
-* expressed or implied, including but not limited to the liability
-* concerning the freedom from material defects, the fitness for parti-
-* cular purposes or the freedom of proprietary rights of third parties.
-*
-*****************************************************************************
-* Module name.: cpcusb
-*****************************************************************************
-* Include file: cpc.h
-*****************************************************************************
-* Project.....: Windows Driver Development Kit
-* Filename....: sja2m16c.cpp
-* Authors.....: (GU) Gerhard Uttenthaler
-* (CS) Christian Schoett
-*****************************************************************************
-* Short descr.: converts baudrate between SJA1000 and M16C
-*****************************************************************************
-* Description.: handles the baudrate conversion from SJA1000 parameters to
-* M16C parameters
-*****************************************************************************
-* Address : EMS Dr. Thomas Wuensche
-* Sonnenhang 3
-* D-85304 Ilmmuenster
-* Tel. : +49-8441-490260
-* Fax. : +49-8441-81860
-* email: support@ems-wuensche.com
-*****************************************************************************
-* History
-*****************************************************************************
-* Version Date Auth Remark
-*
-* 01.00 ?? GU - initial release
-* 01.10 ?????????? CS - adapted to fit into the USB Windows driver
-* 02.00 18.08.2004 GU - improved the baudrate calculating algorithm
-* - implemented acceptance filtering
-* 02.10 10.09.2004 CS - adapted to fit into the USB Windows driver
-*****************************************************************************
-* ToDo's
-*****************************************************************************
-*/
-
-/****************************************************************************/
-/* I N C L U D E S
-*/
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <asm/uaccess.h>
-#include <linux/usb.h>
-
-#include "cpc.h"
-#include "cpc_int.h"
-#include "cpcusb.h"
-
-#include "sja2m16c.h"
-
-/*********************************************************************/
-int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2)
-{
- return (16000000 / (1 << clk)) / 2 / (brp + 1) / (1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1);
-}
-
-
-/*********************************************************************/
-int samplepoint_m16c(int brp, int pr, int ph1, int ph2)
-{
- return (100 * (1 + pr + 1 + ph1 + 1)) / (1 + pr + 1 + ph1 + 1 +
- ph2 + 1);
-}
-
-
-/****************************************************************************
-* Function.....: SJA1000_TO_M16C_BASIC_Params
-*
-* Task.........: This routine converts SJA1000 CAN btr parameters into M16C
-* parameters based on the sample point and the error. In
-* addition it converts the acceptance filter parameters to
-* suit the M16C parameters
-*
-* Parameters...: None
-*
-* Return values: None
-*
-* Comments.....:
-*****************************************************************************
-* History
-*****************************************************************************
-* 19.01.2005 CS - modifed the conversion of SJA1000 filter params into
-* M16C params. Due to compatibility reasons with the
-* older 82C200 CAN controller the SJA1000
-****************************************************************************/
-int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T * in)
-{
- int sjaBaudrate;
- int sjaSamplepoint;
- int *baudrate_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
- int *samplepoint_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
- int baudrate_error_merk;
- int clk, brp, pr, ph1, ph2;
- int clk_merk, brp_merk, pr_merk, ph1_merk, ph2_merk;
- int index;
- unsigned char acc_code0, acc_code1, acc_code2, acc_code3;
- unsigned char acc_mask0, acc_mask1, acc_mask2, acc_mask3;
- CPC_MSG_T * out;
- C0CONR_T c0con;
- C1CONR_T c1con;
- int tmpAccCode;
- int tmpAccMask;
-
- // we have to convert the parameters into M16C parameters
- CPC_SJA1000_PARAMS_T * pParams;
-
- // check if the type is CAN parameters and if we have to convert the given params
- if (in->type != CPC_CMD_T_CAN_PRMS
- || in->msg.canparams.cc_type != SJA1000)
- return 0;
- pParams =
- (CPC_SJA1000_PARAMS_T *) & in->msg.canparams.cc_params.sja1000;
- acc_code0 = pParams->acc_code0;
- acc_code1 = pParams->acc_code1;
- acc_code2 = pParams->acc_code2;
- acc_code3 = pParams->acc_code3;
- acc_mask0 = pParams->acc_mask0;
- acc_mask1 = pParams->acc_mask1;
- acc_mask2 = pParams->acc_mask2;
- acc_mask3 = pParams->acc_mask3;
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("acc_code0: %2.2Xh\n", acc_code0);
- info("acc_code1: %2.2Xh\n", acc_code1);
- info("acc_code2: %2.2Xh\n", acc_code2);
- info("acc_code3: %2.2Xh\n", acc_code3);
- info("acc_mask0: %2.2Xh\n", acc_mask0);
- info("acc_mask1: %2.2Xh\n", acc_mask1);
- info("acc_mask2: %2.2Xh\n", acc_mask2);
- info("acc_mask3: %2.2Xh\n", acc_mask3);
-
-#endif /* */
- if (!
- (baudrate_error =
- (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
- err("Could not allocate memory\n");
- return -3;
- }
- if (!
- (samplepoint_error =
- (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
- err("Could not allocate memory\n");
- vfree(baudrate_error);
- return -3;
- }
- memset(baudrate_error, 0xff, sizeof(baudrate_error));
- memset(samplepoint_error, 0xff, sizeof(baudrate_error));
- sjaBaudrate =
- 16000000 / 2 / SJA_BRP / (1 + SJA_TSEG1 + SJA_TSEG2);
- sjaSamplepoint =
- 100 * (1 + SJA_TSEG1) / (1 + SJA_TSEG1 + SJA_TSEG2);
- if (sjaBaudrate == 0) {
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return -2;
- }
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("\nStarting SJA CAN params\n");
- info("-------------------------\n");
- info("TS1 : %2.2Xh TS2 : %2.2Xh\n", SJA_TSEG1, SJA_TSEG2);
- info("BTR0 : %2.2Xh BTR1: %2.2Xh\n", pParams->btr0,
- pParams->btr1);
- info("Baudrate: %d.%dkBaud\n", sjaBaudrate / 1000,
- sjaBaudrate % 1000);
- info("Sample P: 0.%d\n", sjaSamplepoint);
- info("\n");
-
-#endif /* */
- c0con.bc0con.sam = SJA_SAM;
- c1con.bc1con.sjw = SJA_SJW;
-
- // calculate errors for all baudrates
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- baudrate_error[index] =
- 100 *
- abs(baudrate_m16c
- (clk, brp, pr, ph1,
- ph2) -
- sjaBaudrate) /
- sjaBaudrate;
- samplepoint_error[index] =
- abs(samplepoint_m16c
- (brp, pr, ph1,
- ph2) -
- sjaSamplepoint);
-
-#if 0
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c(clk,
- brp, pr,
- ph1,
- ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
- info
- ("clk : %d\n",
- clk);
-
-#endif /* */
- index++;
- }
- }
- }
- }
- }
-
- // mark all baudrate_error entries which are outer limits
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- if ((baudrate_error[index]
- >
- BAUDRATE_TOLERANCE_PERCENT)
- ||
- (samplepoint_error
- [index] >
- SAMPLEPOINT_TOLERANCE_PERCENT)
- ||
- (samplepoint_m16c
- (brp, pr, ph1,
- ph2) >
- SAMPLEPOINT_UPPER_LIMIT))
- {
- baudrate_error
- [index] = -1;
- } else
- if (((1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1) < 8)
- ||
- ((1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1) > 25)) {
- baudrate_error
- [index] = -1;
- }
-
-#if 0
- else {
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c
- (clk, brp, pr,
- ph1, ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
- }
-
-#endif /* */
- index++;
- }
- }
- }
- }
- }
-
- // find list of minimum of baudrate_error within unmarked entries
- clk_merk = brp_merk = pr_merk = ph1_merk = ph2_merk = 0;
- baudrate_error_merk = 100;
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- if (baudrate_error[index]
- != -1) {
- if (baudrate_error
- [index] <
- baudrate_error_merk)
- {
- baudrate_error_merk
- =
- baudrate_error
- [index];
- brp_merk =
- brp;
- pr_merk =
- pr;
- ph1_merk =
- ph1;
- ph2_merk =
- ph2;
- clk_merk =
- clk;
-
-#if 0
- info
- ("brp: %2.2Xh pr: %2.2Xh ph1: %2.2Xh ph2: %2.2Xh\n",
- brp,
- pr,
- ph1,
- ph2);
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c
- (clk,
- brp,
- pr,
- ph1,
- ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
-
-#endif /* */
- }
- }
- index++;
- }
- }
- }
- }
- }
- if (baudrate_error_merk == 100) {
- info("ERROR: Could not convert CAN init parameter\n");
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return -1;
- }
-
- // setting m16c CAN parameter
- c0con.bc0con.brp = brp_merk;
- c0con.bc0con.pr = pr_merk;
- c1con.bc1con.ph1 = ph1_merk;
- c1con.bc1con.ph2 = ph2_merk;
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("\nResulting M16C CAN params\n");
- info("-------------------------\n");
- info("clk : %2.2Xh\n", clk_merk);
- info("ph1 : %2.2Xh ph2: %2.2Xh\n", c1con.bc1con.ph1 + 1,
- c1con.bc1con.ph2 + 1);
- info("pr : %2.2Xh brp: %2.2Xh\n", c0con.bc0con.pr + 1,
- c0con.bc0con.brp + 1);
- info("sjw : %2.2Xh sam: %2.2Xh\n", c1con.bc1con.sjw,
- c0con.bc0con.sam);
- info("co1 : %2.2Xh co0: %2.2Xh\n", c1con.c1con, c0con.c0con);
- info("Baudrate: %d.%dBaud\n",
- baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2) / 1000,
- baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2) % 1000);
- info("Sample P: 0.%d\n",
- samplepoint_m16c(c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2));
- info("\n");
-
-#endif /* */
- out = in;
- out->type = 6;
- out->length = sizeof(CPC_M16C_BASIC_PARAMS_T) + 1;
- out->msg.canparams.cc_type = M16C_BASIC;
- out->msg.canparams.cc_params.m16c_basic.con0 = c0con.c0con;
- out->msg.canparams.cc_params.m16c_basic.con1 = c1con.c1con;
- out->msg.canparams.cc_params.m16c_basic.ctlr0 = 0x4C;
- out->msg.canparams.cc_params.m16c_basic.ctlr1 = 0x00;
- out->msg.canparams.cc_params.m16c_basic.clk = clk_merk;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
- acc_code0;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code1 = acc_code1;
-
-// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
- tmpAccCode = (acc_code1 >> 5) + (acc_code0 << 3);
- out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
- (unsigned char) tmpAccCode;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code1 =
- (unsigned char) (tmpAccCode >> 8);
-
-// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
- ~acc_mask0;
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
- ~acc_mask1;
-
-// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
- tmpAccMask = ((acc_mask1) >> 5) + ((acc_mask0) << 3);
-
-// info("tmpAccMask: 0x%4.4X\n", tmpAccMask);
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
- (unsigned char) ~tmpAccMask;
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
- (unsigned char) ~(tmpAccMask >> 8);
-
-// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code0 =
- (unsigned char) tmpAccCode;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code1 =
- (unsigned char) (tmpAccCode >> 8);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code2 = acc_code2;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code3 = acc_code3;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask0 =
- (unsigned char) ~tmpAccMask;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask1 =
- (unsigned char) ~(tmpAccMask >> 8);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask2 =
- ~acc_mask2;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask3 =
- ~acc_mask3;
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return 0;
-}
-
-
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index bb69e25..f814730 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -89,6 +89,7 @@
#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
+#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */
/* init device ... can sleep, or cause probe() failure */
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 515bc23..e06d0b8 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -49,6 +49,7 @@
cond_syscall(compat_sys_sendmsg);
cond_syscall(sys_recvmsg);
cond_syscall(compat_sys_recvmsg);
+cond_syscall(compat_sys_recvfrom);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 73a14b8..b91839e 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -671,7 +671,7 @@
return p;
}
-static char *ip6_compressed_string(char *p, const struct in6_addr *addr)
+static char *ip6_compressed_string(char *p, const char *addr)
{
int i;
int j;
@@ -683,7 +683,12 @@
u8 hi;
u8 lo;
bool needcolon = false;
- bool useIPv4 = ipv6_addr_v4mapped(addr) || ipv6_addr_is_isatap(addr);
+ bool useIPv4;
+ struct in6_addr in6;
+
+ memcpy(&in6, addr, sizeof(struct in6_addr));
+
+ useIPv4 = ipv6_addr_v4mapped(&in6) || ipv6_addr_is_isatap(&in6);
memset(zerolength, 0, sizeof(zerolength));
@@ -695,7 +700,7 @@
/* find position of longest 0 run */
for (i = 0; i < range; i++) {
for (j = i; j < range; j++) {
- if (addr->s6_addr16[j] != 0)
+ if (in6.s6_addr16[j] != 0)
break;
zerolength[i]++;
}
@@ -722,7 +727,7 @@
needcolon = false;
}
/* hex u16 without leading 0s */
- word = ntohs(addr->s6_addr16[i]);
+ word = ntohs(in6.s6_addr16[i]);
hi = word >> 8;
lo = word & 0xff;
if (hi) {
@@ -741,19 +746,19 @@
if (useIPv4) {
if (needcolon)
*p++ = ':';
- p = ip4_string(p, &addr->s6_addr[12], false);
+ p = ip4_string(p, &in6.s6_addr[12], false);
}
*p = '\0';
return p;
}
-static char *ip6_string(char *p, const struct in6_addr *addr, const char *fmt)
+static char *ip6_string(char *p, const char *addr, const char *fmt)
{
int i;
for (i = 0; i < 8; i++) {
- p = pack_hex_byte(p, addr->s6_addr[2 * i]);
- p = pack_hex_byte(p, addr->s6_addr[2 * i + 1]);
+ p = pack_hex_byte(p, *addr++);
+ p = pack_hex_byte(p, *addr++);
if (fmt[0] == 'I' && i != 7)
*p++ = ':';
}
@@ -768,9 +773,9 @@
char ip6_addr[sizeof("xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:255.255.255.255")];
if (fmt[0] == 'I' && fmt[2] == 'c')
- ip6_compressed_string(ip6_addr, (const struct in6_addr *)addr);
+ ip6_compressed_string(ip6_addr, addr);
else
- ip6_string(ip6_addr, (const struct in6_addr *)addr, fmt);
+ ip6_string(ip6_addr, addr, fmt);
return string(buf, end, ip6_addr, spec);
}
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index da0f64f..d6b1b05 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1781,8 +1781,8 @@
ax25_info.idletimer = ax25_display_timer(&ax25->idletimer) / (60 * HZ);
ax25_info.n2count = ax25->n2count;
ax25_info.state = ax25->state;
- ax25_info.rcv_q = sk_wmem_alloc_get(sk);
- ax25_info.snd_q = sk_rmem_alloc_get(sk);
+ ax25_info.rcv_q = sk_rmem_alloc_get(sk);
+ ax25_info.snd_q = sk_wmem_alloc_get(sk);
ax25_info.vs = ax25->vs;
ax25_info.vr = ax25->vr;
ax25_info.va = ax25->va;
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 0399011..71e10ca 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -90,8 +90,8 @@
bss->dtim_period = tim_ie->dtim_period;
}
- /* set default value for buggy APs */
- if (!elems->tim || bss->dtim_period == 0)
+ /* set default value for buggy AP/no TIM element */
+ if (bss->dtim_period == 0)
bss->dtim_period = 1;
bss->supp_rates_len = 0;
diff --git a/net/wireless/wext-sme.c b/net/wireless/wext-sme.c
index d16cd9e..bf72527 100644
--- a/net/wireless/wext-sme.c
+++ b/net/wireless/wext-sme.c
@@ -26,11 +26,11 @@
wdev->wext.connect.ie = wdev->wext.ie;
wdev->wext.connect.ie_len = wdev->wext.ie_len;
- wdev->wext.connect.privacy = wdev->wext.default_key != -1;
if (wdev->wext.keys) {
wdev->wext.keys->def = wdev->wext.default_key;
wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key;
+ wdev->wext.connect.privacy = true;
}
if (!wdev->wext.connect.ssid_len)