blob: ccbf857d1d558461eb59139784faa2d0f43cabc9 [file] [log] [blame]
/*
* Copyright 2004 James Cleverdon, IBM.
* Subject to the GNU Public License, v.2
*
* Flat APIC subarch code.
*
* Hacked for x86-64 by James Cleverdon from i386 architecture code by
* Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
* James Cleverdon.
*/
#include <linux/errno.h>
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/hardirq.h>
#include <linux/module.h>
#include <asm/smp.h>
#include <asm/apic.h>
#include <asm/ipi.h>
#include <linux/acpi.h>
static struct apic apic_physflat;
static struct apic apic_flat;
struct apic __read_mostly *apic = &apic_flat;
EXPORT_SYMBOL_GPL(apic);
static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return 1;
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
void flat_init_apic_ldr(void)
{
unsigned long val;
unsigned long num, id;
num = smp_processor_id();
id = 1UL << num;
apic_write(APIC_DFR, APIC_DFR_FLAT);
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
val |= SET_APIC_LOGICAL_ID(id);
apic_write(APIC_LDR, val);
}
static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
{
unsigned long flags;
local_irq_save(flags);
__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
local_irq_restore(flags);
}
static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
{
unsigned long mask = cpumask_bits(cpumask)[0];
_flat_send_IPI_mask(mask, vector);
}
static void
flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
{
unsigned long mask = cpumask_bits(cpumask)[0];
int cpu = smp_processor_id();
if (cpu < BITS_PER_LONG)
clear_bit(cpu, &mask);
_flat_send_IPI_mask(mask, vector);
}
static void flat_send_IPI_allbutself(int vector)
{
int cpu = smp_processor_id();
#ifdef CONFIG_HOTPLUG_CPU
int hotplug = 1;
#else
int hotplug = 0;
#endif
if (hotplug || vector == NMI_VECTOR) {
if (!cpumask_equal(cpu_online_mask, cpumask_of(cpu))) {
unsigned long mask = cpumask_bits(cpu_online_mask)[0];
if (cpu < BITS_PER_LONG)
clear_bit(cpu, &mask);
_flat_send_IPI_mask(mask, vector);
}
} else if (num_online_cpus() > 1) {
__default_send_IPI_shortcut(APIC_DEST_ALLBUT,
vector, apic->dest_logical);
}
}
static void flat_send_IPI_all(int vector)
{
if (vector == NMI_VECTOR) {
flat_send_IPI_mask(cpu_online_mask, vector);
} else {
__default_send_IPI_shortcut(APIC_DEST_ALLINC,
vector, apic->dest_logical);
}
}
static unsigned int flat_get_apic_id(unsigned long x)
{
unsigned int id;
id = (((x)>>24) & 0xFFu);
return id;
}
static unsigned long set_apic_id(unsigned int id)
{
unsigned long x;
x = ((id & 0xFFu)<<24);
return x;
}
static unsigned int read_xapic_id(void)
{
unsigned int id;
id = flat_get_apic_id(apic_read(APIC_ID));
return id;
}
static int flat_apic_id_registered(void)
{
return physid_isset(read_xapic_id(), phys_cpu_present_map);
}
static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
{
return initial_apic_id >> index_msb;
}
static int flat_probe(void)
{
return 1;
}
static struct apic apic_flat = {
.name = "flat",
.probe = flat_probe,
.acpi_madt_oem_check = flat_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = flat_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio,
.irq_dest_mode = 1, /* logical */
.target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = APIC_DEST_LOGICAL,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = flat_vector_allocation_domain,
.init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = flat_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = flat_get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFu << 24,
.cpu_mask_to_apicid_and = flat_cpu_mask_to_apicid_and,
.send_IPI_mask = flat_send_IPI_mask,
.send_IPI_mask_allbutself = flat_send_IPI_mask_allbutself,
.send_IPI_allbutself = flat_send_IPI_allbutself,
.send_IPI_all = flat_send_IPI_all,
.send_IPI_self = apic_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
/*
* Physflat mode is used when there are more than 8 CPUs on a system.
* We cannot use logical delivery in this case because the mask
* overflows, so use physical mode.
*/
static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
}
if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
return 1;
}
#endif
return 0;
}
static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
{
default_send_IPI_mask_sequence_phys(cpumask, vector);
}
static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
int vector)
{
default_send_IPI_mask_allbutself_phys(cpumask, vector);
}
static void physflat_send_IPI_allbutself(int vector)
{
default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
}
static void physflat_send_IPI_all(int vector)
{
physflat_send_IPI_mask(cpu_online_mask, vector);
}
static int physflat_probe(void)
{
if (apic == &apic_physflat || num_possible_cpus() > 8)
return 1;
return 0;
}
static struct apic apic_physflat = {
.name = "physical flat",
.probe = physflat_probe,
.acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = flat_apic_id_registered,
.irq_delivery_mode = dest_Fixed,
.irq_dest_mode = 0, /* physical */
.target_cpus = online_target_cpus,
.disable_esr = 0,
.dest_logical = 0,
.check_apicid_used = NULL,
.check_apicid_present = NULL,
.vector_allocation_domain = default_vector_allocation_domain,
/* not needed, but shouldn't hurt: */
.init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.multi_timer_check = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
.apicid_to_cpu_present = NULL,
.setup_portio_remap = NULL,
.check_phys_apicid_present = default_check_phys_apicid_present,
.enable_apic_mode = NULL,
.phys_pkg_id = flat_phys_pkg_id,
.mps_oem_check = NULL,
.get_apic_id = flat_get_apic_id,
.set_apic_id = set_apic_id,
.apic_id_mask = 0xFFu << 24,
.cpu_mask_to_apicid_and = default_cpu_mask_to_apicid_and,
.send_IPI_mask = physflat_send_IPI_mask,
.send_IPI_mask_allbutself = physflat_send_IPI_mask_allbutself,
.send_IPI_allbutself = physflat_send_IPI_allbutself,
.send_IPI_all = physflat_send_IPI_all,
.send_IPI_self = apic_send_IPI_self,
.trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW,
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
.inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
.eoi_write = native_apic_mem_write,
.icr_read = native_apic_icr_read,
.icr_write = native_apic_icr_write,
.wait_icr_idle = native_apic_wait_icr_idle,
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
/*
* We need to check for physflat first, so this order is important.
*/
apic_drivers(apic_physflat, apic_flat);