| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2013 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #ifndef __QLA_MR_H |
| #define __QLA_MR_H |
| |
| /* |
| * The PCI VendorID and DeviceID for our board. |
| */ |
| #define PCI_DEVICE_ID_QLOGIC_ISPF001 0xF001 |
| |
| /* FX00 specific definitions */ |
| |
| #define FX00_COMMAND_TYPE_7 0x07 /* Command Type 7 entry for 7XXX */ |
| struct cmd_type_7_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t sys_define; /* System defined. */ |
| uint8_t entry_status; /* Entry Status. */ |
| |
| uint32_t handle; /* System handle. */ |
| uint32_t handle_hi; |
| |
| __le16 tgt_idx; /* Target Idx. */ |
| uint16_t timeout; /* Command timeout. */ |
| |
| __le16 dseg_count; /* Data segment count. */ |
| uint16_t scsi_rsp_dsd_len; |
| |
| struct scsi_lun lun; /* LUN (LE). */ |
| |
| uint8_t cntrl_flags; |
| |
| uint8_t task_mgmt_flags; /* Task management flags. */ |
| |
| uint8_t task; |
| |
| uint8_t crn; |
| |
| uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ |
| __le32 byte_count; /* Total byte count. */ |
| |
| uint32_t dseg_0_address[2]; /* Data segment 0 address. */ |
| uint32_t dseg_0_len; /* Data segment 0 length. */ |
| }; |
| |
| /* |
| * ISP queue - marker entry structure definition. |
| */ |
| struct mrk_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t handle_count; /* Handle count. */ |
| uint8_t entry_status; /* Entry Status. */ |
| |
| uint32_t handle; /* System handle. */ |
| uint32_t handle_hi; /* System handle. */ |
| |
| uint16_t tgt_id; /* Target ID. */ |
| |
| uint8_t modifier; /* Modifier (7-0). */ |
| uint8_t reserved_1; |
| |
| uint8_t reserved_2[5]; |
| |
| uint8_t lun[8]; /* FCP LUN (BE). */ |
| uint8_t reserved_3[36]; |
| }; |
| |
| |
| #define STATUS_TYPE_FX00 0x01 /* Status entry. */ |
| struct sts_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t sys_define; /* System defined. */ |
| uint8_t entry_status; /* Entry Status. */ |
| |
| uint32_t handle; /* System handle. */ |
| uint32_t handle_hi; /* System handle. */ |
| |
| __le16 comp_status; /* Completion status. */ |
| uint16_t reserved_0; /* OX_ID used by the firmware. */ |
| |
| __le32 residual_len; /* FW calc residual transfer length. */ |
| |
| uint16_t reserved_1; |
| uint16_t state_flags; /* State flags. */ |
| |
| uint16_t reserved_2; |
| __le16 scsi_status; /* SCSI status. */ |
| |
| uint32_t sense_len; /* FCP SENSE length. */ |
| uint8_t data[32]; /* FCP response/sense information. */ |
| }; |
| |
| |
| #define MAX_HANDLE_COUNT 15 |
| #define MULTI_STATUS_TYPE_FX00 0x0D |
| |
| struct multi_sts_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t sys_define; /* System defined. */ |
| uint8_t handle_count; |
| uint8_t entry_status; |
| |
| __le32 handles[MAX_HANDLE_COUNT]; |
| }; |
| |
| #define TSK_MGMT_IOCB_TYPE_FX00 0x05 |
| struct tsk_mgmt_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t sys_define; |
| uint8_t entry_status; /* Entry Status. */ |
| |
| __le32 handle; /* System handle. */ |
| |
| uint32_t handle_hi; /* System handle. */ |
| |
| __le16 tgt_id; /* Target Idx. */ |
| |
| uint16_t reserved_1; |
| |
| uint16_t delay; /* Activity delay in seconds. */ |
| |
| __le16 timeout; /* Command timeout. */ |
| |
| struct scsi_lun lun; /* LUN (LE). */ |
| |
| __le32 control_flags; /* Control Flags. */ |
| |
| uint8_t reserved_2[32]; |
| }; |
| |
| |
| #define ABORT_IOCB_TYPE_FX00 0x08 /* Abort IOCB status. */ |
| struct abort_iocb_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t sys_define; /* System defined. */ |
| uint8_t entry_status; /* Entry Status. */ |
| |
| __le32 handle; /* System handle. */ |
| __le32 handle_hi; /* System handle. */ |
| |
| __le16 tgt_id_sts; /* Completion status. */ |
| __le16 options; |
| |
| __le32 abort_handle; /* System handle. */ |
| __le32 abort_handle_hi; /* System handle. */ |
| |
| __le16 req_que_no; |
| uint8_t reserved_1[38]; |
| }; |
| |
| #define IOCTL_IOSB_TYPE_FX00 0x0C |
| struct ioctl_iocb_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t sys_define; /* System defined. */ |
| uint8_t entry_status; /* Entry Status. */ |
| |
| uint32_t handle; /* System handle. */ |
| uint32_t reserved_0; /* System handle. */ |
| |
| uint16_t comp_func_num; |
| __le16 fw_iotcl_flags; |
| |
| __le32 dataword_r; /* Data word returned */ |
| uint32_t adapid; /* Adapter ID */ |
| uint32_t adapid_hi; /* Adapter ID high */ |
| uint32_t reserved_1; |
| |
| __le32 seq_no; |
| uint8_t reserved_2[20]; |
| uint32_t residuallen; |
| __le32 status; |
| }; |
| |
| #define STATUS_CONT_TYPE_FX00 0x04 |
| |
| #define FX00_IOCB_TYPE 0x0B |
| struct fxdisc_entry_fx00 { |
| uint8_t entry_type; /* Entry type. */ |
| uint8_t entry_count; /* Entry count. */ |
| uint8_t sys_define; /* System Defined. */ |
| uint8_t entry_status; /* Entry Status. */ |
| |
| __le32 handle; /* System handle. */ |
| __le32 reserved_0; /* System handle. */ |
| |
| __le16 func_num; |
| __le16 req_xfrcnt; |
| __le16 req_dsdcnt; |
| __le16 rsp_xfrcnt; |
| __le16 rsp_dsdcnt; |
| uint8_t flags; |
| uint8_t reserved_1; |
| |
| __le32 dseg_rq_address[2]; /* Data segment 0 address. */ |
| __le32 dseg_rq_len; /* Data segment 0 length. */ |
| __le32 dseg_rsp_address[2]; /* Data segment 1 address. */ |
| __le32 dseg_rsp_len; /* Data segment 1 length. */ |
| |
| __le32 dataword; |
| __le32 adapid; |
| __le32 adapid_hi; |
| __le32 dataword_extra; |
| }; |
| |
| struct qlafx00_tgt_node_info { |
| uint8_t tgt_node_wwpn[WWN_SIZE]; |
| uint8_t tgt_node_wwnn[WWN_SIZE]; |
| uint32_t tgt_node_state; |
| uint8_t reserved[128]; |
| uint32_t reserved_1[8]; |
| uint64_t reserved_2[4]; |
| } __packed; |
| |
| #define QLAFX00_TGT_NODE_INFO sizeof(struct qlafx00_tgt_node_info) |
| |
| #define QLAFX00_LINK_STATUS_DOWN 0x10 |
| #define QLAFX00_LINK_STATUS_UP 0x11 |
| |
| #define QLAFX00_PORT_SPEED_2G 0x2 |
| #define QLAFX00_PORT_SPEED_4G 0x4 |
| #define QLAFX00_PORT_SPEED_8G 0x8 |
| #define QLAFX00_PORT_SPEED_10G 0xa |
| struct port_info_data { |
| uint8_t port_state; |
| uint8_t port_type; |
| uint16_t port_identifier; |
| uint32_t up_port_state; |
| uint8_t fw_ver_num[32]; |
| uint8_t portal_attrib; |
| uint16_t host_option; |
| uint8_t reset_delay; |
| uint8_t pdwn_retry_cnt; |
| uint16_t max_luns2tgt; |
| uint8_t risc_ver; |
| uint8_t pconn_option; |
| uint16_t risc_option; |
| uint16_t max_frame_len; |
| uint16_t max_iocb_alloc; |
| uint16_t exec_throttle; |
| uint8_t retry_cnt; |
| uint8_t retry_delay; |
| uint8_t port_name[8]; |
| uint8_t port_id[3]; |
| uint8_t link_status; |
| uint8_t plink_rate; |
| uint32_t link_config; |
| uint16_t adap_haddr; |
| uint8_t tgt_disc; |
| uint8_t log_tout; |
| uint8_t node_name[8]; |
| uint16_t erisc_opt1; |
| uint8_t resp_acc_tmr; |
| uint8_t intr_del_tmr; |
| uint8_t erisc_opt2; |
| uint8_t alt_port_name[8]; |
| uint8_t alt_node_name[8]; |
| uint8_t link_down_tout; |
| uint8_t conn_type; |
| uint8_t fc_fw_mode; |
| uint32_t uiReserved[48]; |
| } __packed; |
| |
| /* OS Type Designations */ |
| #define OS_TYPE_UNKNOWN 0 |
| #define OS_TYPE_LINUX 2 |
| |
| /* Linux Info */ |
| #define SYSNAME_LENGTH 128 |
| #define NODENAME_LENGTH 64 |
| #define RELEASE_LENGTH 64 |
| #define VERSION_LENGTH 64 |
| #define MACHINE_LENGTH 64 |
| #define DOMNAME_LENGTH 64 |
| |
| struct host_system_info { |
| uint32_t os_type; |
| char sysname[SYSNAME_LENGTH]; |
| char nodename[NODENAME_LENGTH]; |
| char release[RELEASE_LENGTH]; |
| char version[VERSION_LENGTH]; |
| char machine[MACHINE_LENGTH]; |
| char domainname[DOMNAME_LENGTH]; |
| char hostdriver[VERSION_LENGTH]; |
| uint32_t reserved[64]; |
| } __packed; |
| |
| struct register_host_info { |
| struct host_system_info hsi; /* host system info */ |
| uint64_t utc; /* UTC (system time) */ |
| uint32_t reserved[64]; /* future additions */ |
| } __packed; |
| |
| |
| #define QLAFX00_PORT_DATA_INFO (sizeof(struct port_info_data)) |
| #define QLAFX00_TGT_NODE_LIST_SIZE (sizeof(uint32_t) * 32) |
| |
| struct config_info_data { |
| uint8_t product_name[256]; |
| uint8_t symbolic_name[64]; |
| uint8_t serial_num[32]; |
| uint8_t hw_version[16]; |
| uint8_t fw_version[16]; |
| uint8_t uboot_version[16]; |
| uint8_t fru_serial_num[32]; |
| |
| uint8_t fc_port_count; |
| uint8_t iscsi_port_count; |
| uint8_t reserved1[2]; |
| |
| uint8_t mode; |
| uint8_t log_level; |
| uint8_t reserved2[2]; |
| |
| uint32_t log_size; |
| |
| uint8_t tgt_pres_mode; |
| uint8_t iqn_flags; |
| uint8_t lun_mapping; |
| |
| uint64_t adapter_id; |
| |
| uint32_t cluster_key_len; |
| uint8_t cluster_key[16]; |
| |
| uint64_t cluster_master_id; |
| uint64_t cluster_slave_id; |
| uint8_t cluster_flags; |
| uint32_t enabled_capabilities; |
| uint32_t nominal_temp_value; |
| } __packed; |
| |
| #define FXDISC_GET_CONFIG_INFO 0x01 |
| #define FXDISC_GET_PORT_INFO 0x02 |
| #define FXDISC_GET_TGT_NODE_INFO 0x80 |
| #define FXDISC_GET_TGT_NODE_LIST 0x81 |
| #define FXDISC_REG_HOST_INFO 0x99 |
| |
| #define QLAFX00_HBA_ICNTRL_REG 0x20B08 |
| #define QLAFX00_ICR_ENB_MASK 0x80000000 |
| #define QLAFX00_ICR_DIS_MASK 0x7fffffff |
| #define QLAFX00_HST_RST_REG 0x18264 |
| #define QLAFX00_SOC_TEMP_REG 0x184C4 |
| #define QLAFX00_HST_TO_HBA_REG 0x20A04 |
| #define QLAFX00_HBA_TO_HOST_REG 0x21B70 |
| #define QLAFX00_HST_INT_STS_BITS 0x7 |
| #define QLAFX00_BAR1_BASE_ADDR_REG 0x40018 |
| #define QLAFX00_PEX0_WIN0_BASE_ADDR_REG 0x41824 |
| |
| #define QLAFX00_INTR_MB_CMPLT 0x1 |
| #define QLAFX00_INTR_RSP_CMPLT 0x2 |
| #define QLAFX00_INTR_MB_RSP_CMPLT 0x3 |
| #define QLAFX00_INTR_ASYNC_CMPLT 0x4 |
| #define QLAFX00_INTR_MB_ASYNC_CMPLT 0x5 |
| #define QLAFX00_INTR_RSP_ASYNC_CMPLT 0x6 |
| #define QLAFX00_INTR_ALL_CMPLT 0x7 |
| |
| #define QLAFX00_MBA_SYSTEM_ERR 0x8002 |
| #define QLAFX00_MBA_TEMP_OVER 0x8005 |
| #define QLAFX00_MBA_TEMP_NORM 0x8006 |
| #define QLAFX00_MBA_TEMP_CRIT 0x8007 |
| #define QLAFX00_MBA_LINK_UP 0x8011 |
| #define QLAFX00_MBA_LINK_DOWN 0x8012 |
| #define QLAFX00_MBA_PORT_UPDATE 0x8014 |
| #define QLAFX00_MBA_SHUTDOWN_RQSTD 0x8062 |
| |
| #define SOC_SW_RST_CONTROL_REG_CORE0 0x0020800 |
| #define SOC_FABRIC_RST_CONTROL_REG 0x0020840 |
| #define SOC_FABRIC_CONTROL_REG 0x0020200 |
| #define SOC_FABRIC_CONFIG_REG 0x0020204 |
| |
| #define SOC_INTERRUPT_SOURCE_I_CONTROL_REG 0x0020B00 |
| #define SOC_CORE_TIMER_REG 0x0021850 |
| #define SOC_IRQ_ACK_REG 0x00218b4 |
| |
| #define CONTINUE_A64_TYPE_FX00 0x03 /* Continuation entry. */ |
| |
| #define QLAFX00_SET_HST_INTR(ha, value) \ |
| WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_TO_HBA_REG, \ |
| value) |
| |
| #define QLAFX00_CLR_HST_INTR(ha, value) \ |
| WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \ |
| ~value) |
| |
| #define QLAFX00_RD_INTR_REG(ha) \ |
| RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG) |
| |
| #define QLAFX00_CLR_INTR_REG(ha, value) \ |
| WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \ |
| ~value) |
| |
| #define QLAFX00_SET_HBA_SOC_REG(ha, off, val)\ |
| WRT_REG_DWORD((ha)->cregbase + off, val) |
| |
| #define QLAFX00_GET_HBA_SOC_REG(ha, off)\ |
| RD_REG_DWORD((ha)->cregbase + off) |
| |
| #define QLAFX00_HBA_RST_REG(ha, val)\ |
| WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_RST_REG, val) |
| |
| #define QLAFX00_RD_ICNTRL_REG(ha) \ |
| RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG) |
| |
| #define QLAFX00_ENABLE_ICNTRL_REG(ha) \ |
| WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \ |
| (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) | \ |
| QLAFX00_ICR_ENB_MASK)) |
| |
| #define QLAFX00_DISABLE_ICNTRL_REG(ha) \ |
| WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \ |
| (QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) & \ |
| QLAFX00_ICR_DIS_MASK)) |
| |
| #define QLAFX00_RD_REG(ha, off) \ |
| RD_REG_DWORD((ha)->cregbase + off) |
| |
| #define QLAFX00_WR_REG(ha, off, val) \ |
| WRT_REG_DWORD((ha)->cregbase + off, val) |
| |
| struct qla_mt_iocb_rqst_fx00 { |
| __le32 reserved_0; |
| |
| __le16 func_type; |
| uint8_t flags; |
| uint8_t reserved_1; |
| |
| __le32 dataword; |
| |
| __le32 adapid; |
| __le32 adapid_hi; |
| |
| __le32 dataword_extra; |
| |
| __le16 req_len; |
| __le16 reserved_2; |
| |
| __le16 rsp_len; |
| __le16 reserved_3; |
| }; |
| |
| struct qla_mt_iocb_rsp_fx00 { |
| uint32_t reserved_1; |
| |
| uint16_t func_type; |
| __le16 ioctl_flags; |
| |
| __le32 ioctl_data; |
| |
| uint32_t adapid; |
| uint32_t adapid_hi; |
| |
| uint32_t reserved_2; |
| __le32 seq_number; |
| |
| uint8_t reserved_3[20]; |
| |
| int32_t res_count; |
| |
| __le32 status; |
| }; |
| |
| |
| #define MAILBOX_REGISTER_COUNT_FX00 16 |
| #define AEN_MAILBOX_REGISTER_COUNT_FX00 8 |
| #define MAX_FIBRE_DEVICES_FX00 512 |
| #define MAX_LUNS_FX00 0x1024 |
| #define MAX_TARGETS_FX00 MAX_ISA_DEVICES |
| #define REQUEST_ENTRY_CNT_FX00 512 /* Number of request entries. */ |
| #define RESPONSE_ENTRY_CNT_FX00 256 /* Number of response entries.*/ |
| |
| /* |
| * Firmware state codes for QLAFX00 adapters |
| */ |
| #define FSTATE_FX00_CONFIG_WAIT 0x0000 /* Waiting for driver to issue |
| * Initialize FW Mbox cmd |
| */ |
| #define FSTATE_FX00_INITIALIZED 0x1000 /* FW has been initialized by |
| * the driver |
| */ |
| |
| #define FX00_DEF_RATOV 10 |
| |
| struct mr_data_fx00 { |
| uint8_t product_name[256]; |
| uint8_t symbolic_name[64]; |
| uint8_t serial_num[32]; |
| uint8_t hw_version[16]; |
| uint8_t fw_version[16]; |
| uint8_t uboot_version[16]; |
| uint8_t fru_serial_num[32]; |
| fc_port_t fcport; /* fcport used for requests |
| * that are not linked |
| * to a particular target |
| */ |
| uint8_t fw_hbt_en; |
| uint8_t fw_hbt_cnt; |
| uint8_t fw_hbt_miss_cnt; |
| uint32_t old_fw_hbt_cnt; |
| uint16_t fw_reset_timer_tick; |
| uint8_t fw_reset_timer_exp; |
| uint16_t fw_critemp_timer_tick; |
| uint32_t old_aenmbx0_state; |
| uint32_t critical_temperature; |
| bool extended_io_enabled; |
| }; |
| |
| #define QLAFX00_EXTENDED_IO_EN_MASK 0x20 |
| |
| /* |
| * SoC Junction Temperature is stored in |
| * bits 9:1 of SoC Junction Temperature Register |
| * in a firmware specific format format. |
| * To get the temperature in Celsius degrees |
| * the value from this bitfiled should be converted |
| * using this formula: |
| * Temperature (degrees C) = ((3,153,000 - (10,000 * X)) / 13,825) |
| * where X is the bit field value |
| * this macro reads the register, extracts the bitfield value, |
| * performs the calcualtions and returns temperature in Celsius |
| */ |
| #define QLAFX00_GET_TEMPERATURE(ha) ((3153000 - (10000 * \ |
| ((QLAFX00_RD_REG(ha, QLAFX00_SOC_TEMP_REG) & 0x3FE) >> 1))) / 13825) |
| |
| |
| #define QLAFX00_LOOP_DOWN_TIME 615 /* 600 */ |
| #define QLAFX00_HEARTBEAT_INTERVAL 6 /* number of seconds */ |
| #define QLAFX00_HEARTBEAT_MISS_CNT 3 /* number of miss */ |
| #define QLAFX00_RESET_INTERVAL 120 /* number of seconds */ |
| #define QLAFX00_MAX_RESET_INTERVAL 600 /* number of seconds */ |
| #define QLAFX00_CRITEMP_INTERVAL 60 /* number of seconds */ |
| |
| #define QLAFX00_CRITEMP_THRSHLD 80 /* Celsius degrees */ |
| |
| #endif |