| /* |
| * linux/drivers/mmc/mmci.c - ARM PrimeCell MMCI PL180/1 driver |
| * |
| * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/highmem.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/protocol.h> |
| #include <linux/amba/bus.h> |
| #include <linux/clk.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/div64.h> |
| #include <asm/io.h> |
| #include <asm/scatterlist.h> |
| #include <asm/sizes.h> |
| #include <asm/mach/mmc.h> |
| |
| #include "mmci.h" |
| |
| #define DRIVER_NAME "mmci-pl18x" |
| |
| #define DBG(host,fmt,args...) \ |
| pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args) |
| |
| static unsigned int fmax = 515633; |
| |
| static void |
| mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) |
| { |
| writel(0, host->base + MMCICOMMAND); |
| |
| host->mrq = NULL; |
| host->cmd = NULL; |
| |
| if (mrq->data) |
| mrq->data->bytes_xfered = host->data_xfered; |
| |
| /* |
| * Need to drop the host lock here; mmc_request_done may call |
| * back into the driver... |
| */ |
| spin_unlock(&host->lock); |
| mmc_request_done(host->mmc, mrq); |
| spin_lock(&host->lock); |
| } |
| |
| static void mmci_stop_data(struct mmci_host *host) |
| { |
| writel(0, host->base + MMCIDATACTRL); |
| writel(0, host->base + MMCIMASK1); |
| host->data = NULL; |
| } |
| |
| static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) |
| { |
| unsigned int datactrl, timeout, irqmask; |
| unsigned long long clks; |
| void __iomem *base; |
| |
| DBG(host, "blksz %04x blks %04x flags %08x\n", |
| 1 << data->blksz_bits, data->blocks, data->flags); |
| |
| host->data = data; |
| host->size = data->blocks << data->blksz_bits; |
| host->data_xfered = 0; |
| |
| mmci_init_sg(host, data); |
| |
| clks = (unsigned long long)data->timeout_ns * host->cclk; |
| do_div(clks, 1000000000UL); |
| |
| timeout = data->timeout_clks + (unsigned int)clks; |
| |
| base = host->base; |
| writel(timeout, base + MMCIDATATIMER); |
| writel(host->size, base + MMCIDATALENGTH); |
| |
| datactrl = MCI_DPSM_ENABLE | data->blksz_bits << 4; |
| if (data->flags & MMC_DATA_READ) { |
| datactrl |= MCI_DPSM_DIRECTION; |
| irqmask = MCI_RXFIFOHALFFULLMASK; |
| |
| /* |
| * If we have less than a FIFOSIZE of bytes to transfer, |
| * trigger a PIO interrupt as soon as any data is available. |
| */ |
| if (host->size < MCI_FIFOSIZE) |
| irqmask |= MCI_RXDATAAVLBLMASK; |
| } else { |
| /* |
| * We don't actually need to include "FIFO empty" here |
| * since its implicit in "FIFO half empty". |
| */ |
| irqmask = MCI_TXFIFOHALFEMPTYMASK; |
| } |
| |
| writel(datactrl, base + MMCIDATACTRL); |
| writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); |
| writel(irqmask, base + MMCIMASK1); |
| } |
| |
| static void |
| mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) |
| { |
| void __iomem *base = host->base; |
| |
| DBG(host, "op %02x arg %08x flags %08x\n", |
| cmd->opcode, cmd->arg, cmd->flags); |
| |
| if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) { |
| writel(0, base + MMCICOMMAND); |
| udelay(1); |
| } |
| |
| c |= cmd->opcode | MCI_CPSM_ENABLE; |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) |
| c |= MCI_CPSM_LONGRSP; |
| c |= MCI_CPSM_RESPONSE; |
| } |
| if (/*interrupt*/0) |
| c |= MCI_CPSM_INTERRUPT; |
| |
| host->cmd = cmd; |
| |
| writel(cmd->arg, base + MMCIARGUMENT); |
| writel(c, base + MMCICOMMAND); |
| } |
| |
| static void |
| mmci_data_irq(struct mmci_host *host, struct mmc_data *data, |
| unsigned int status) |
| { |
| if (status & MCI_DATABLOCKEND) { |
| host->data_xfered += 1 << data->blksz_bits; |
| } |
| if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { |
| if (status & MCI_DATACRCFAIL) |
| data->error = MMC_ERR_BADCRC; |
| else if (status & MCI_DATATIMEOUT) |
| data->error = MMC_ERR_TIMEOUT; |
| else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) |
| data->error = MMC_ERR_FIFO; |
| status |= MCI_DATAEND; |
| |
| /* |
| * We hit an error condition. Ensure that any data |
| * partially written to a page is properly coherent. |
| */ |
| if (host->sg_len && data->flags & MMC_DATA_READ) |
| flush_dcache_page(host->sg_ptr->page); |
| } |
| if (status & MCI_DATAEND) { |
| mmci_stop_data(host); |
| |
| if (!data->stop) { |
| mmci_request_end(host, data->mrq); |
| } else { |
| mmci_start_command(host, data->stop, 0); |
| } |
| } |
| } |
| |
| static void |
| mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, |
| unsigned int status) |
| { |
| void __iomem *base = host->base; |
| |
| host->cmd = NULL; |
| |
| cmd->resp[0] = readl(base + MMCIRESPONSE0); |
| cmd->resp[1] = readl(base + MMCIRESPONSE1); |
| cmd->resp[2] = readl(base + MMCIRESPONSE2); |
| cmd->resp[3] = readl(base + MMCIRESPONSE3); |
| |
| if (status & MCI_CMDTIMEOUT) { |
| cmd->error = MMC_ERR_TIMEOUT; |
| } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { |
| cmd->error = MMC_ERR_BADCRC; |
| } |
| |
| if (!cmd->data || cmd->error != MMC_ERR_NONE) { |
| mmci_request_end(host, cmd->mrq); |
| } else if (!(cmd->data->flags & MMC_DATA_READ)) { |
| mmci_start_data(host, cmd->data); |
| } |
| } |
| |
| static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain) |
| { |
| void __iomem *base = host->base; |
| char *ptr = buffer; |
| u32 status; |
| |
| do { |
| int count = host->size - (readl(base + MMCIFIFOCNT) << 2); |
| |
| if (count > remain) |
| count = remain; |
| |
| if (count <= 0) |
| break; |
| |
| readsl(base + MMCIFIFO, ptr, count >> 2); |
| |
| ptr += count; |
| remain -= count; |
| |
| if (remain == 0) |
| break; |
| |
| status = readl(base + MMCISTATUS); |
| } while (status & MCI_RXDATAAVLBL); |
| |
| return ptr - buffer; |
| } |
| |
| static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status) |
| { |
| void __iomem *base = host->base; |
| char *ptr = buffer; |
| |
| do { |
| unsigned int count, maxcnt; |
| |
| maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE; |
| count = min(remain, maxcnt); |
| |
| writesl(base + MMCIFIFO, ptr, count >> 2); |
| |
| ptr += count; |
| remain -= count; |
| |
| if (remain == 0) |
| break; |
| |
| status = readl(base + MMCISTATUS); |
| } while (status & MCI_TXFIFOHALFEMPTY); |
| |
| return ptr - buffer; |
| } |
| |
| /* |
| * PIO data transfer IRQ handler. |
| */ |
| static irqreturn_t mmci_pio_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct mmci_host *host = dev_id; |
| void __iomem *base = host->base; |
| u32 status; |
| |
| status = readl(base + MMCISTATUS); |
| |
| DBG(host, "irq1 %08x\n", status); |
| |
| do { |
| unsigned long flags; |
| unsigned int remain, len; |
| char *buffer; |
| |
| /* |
| * For write, we only need to test the half-empty flag |
| * here - if the FIFO is completely empty, then by |
| * definition it is more than half empty. |
| * |
| * For read, check for data available. |
| */ |
| if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL))) |
| break; |
| |
| /* |
| * Map the current scatter buffer. |
| */ |
| buffer = mmci_kmap_atomic(host, &flags) + host->sg_off; |
| remain = host->sg_ptr->length - host->sg_off; |
| |
| len = 0; |
| if (status & MCI_RXACTIVE) |
| len = mmci_pio_read(host, buffer, remain); |
| if (status & MCI_TXACTIVE) |
| len = mmci_pio_write(host, buffer, remain, status); |
| |
| /* |
| * Unmap the buffer. |
| */ |
| mmci_kunmap_atomic(host, buffer, &flags); |
| |
| host->sg_off += len; |
| host->size -= len; |
| remain -= len; |
| |
| if (remain) |
| break; |
| |
| /* |
| * If we were reading, and we have completed this |
| * page, ensure that the data cache is coherent. |
| */ |
| if (status & MCI_RXACTIVE) |
| flush_dcache_page(host->sg_ptr->page); |
| |
| if (!mmci_next_sg(host)) |
| break; |
| |
| status = readl(base + MMCISTATUS); |
| } while (1); |
| |
| /* |
| * If we're nearing the end of the read, switch to |
| * "any data available" mode. |
| */ |
| if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE) |
| writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1); |
| |
| /* |
| * If we run out of data, disable the data IRQs; this |
| * prevents a race where the FIFO becomes empty before |
| * the chip itself has disabled the data path, and |
| * stops us racing with our data end IRQ. |
| */ |
| if (host->size == 0) { |
| writel(0, base + MMCIMASK1); |
| writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Handle completion of command and data transfers. |
| */ |
| static irqreturn_t mmci_irq(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct mmci_host *host = dev_id; |
| u32 status; |
| int ret = 0; |
| |
| spin_lock(&host->lock); |
| |
| do { |
| struct mmc_command *cmd; |
| struct mmc_data *data; |
| |
| status = readl(host->base + MMCISTATUS); |
| status &= readl(host->base + MMCIMASK0); |
| writel(status, host->base + MMCICLEAR); |
| |
| DBG(host, "irq0 %08x\n", status); |
| |
| data = host->data; |
| if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN| |
| MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data) |
| mmci_data_irq(host, data, status); |
| |
| cmd = host->cmd; |
| if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd) |
| mmci_cmd_irq(host, cmd, status); |
| |
| ret = 1; |
| } while (status); |
| |
| spin_unlock(&host->lock); |
| |
| return IRQ_RETVAL(ret); |
| } |
| |
| static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct mmci_host *host = mmc_priv(mmc); |
| |
| WARN_ON(host->mrq != NULL); |
| |
| spin_lock_irq(&host->lock); |
| |
| host->mrq = mrq; |
| |
| if (mrq->data && mrq->data->flags & MMC_DATA_READ) |
| mmci_start_data(host, mrq->data); |
| |
| mmci_start_command(host, mrq->cmd, 0); |
| |
| spin_unlock_irq(&host->lock); |
| } |
| |
| static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct mmci_host *host = mmc_priv(mmc); |
| u32 clk = 0, pwr = 0; |
| |
| if (ios->clock) { |
| if (ios->clock >= host->mclk) { |
| clk = MCI_CLK_BYPASS; |
| host->cclk = host->mclk; |
| } else { |
| clk = host->mclk / (2 * ios->clock) - 1; |
| if (clk > 256) |
| clk = 255; |
| host->cclk = host->mclk / (2 * (clk + 1)); |
| } |
| clk |= MCI_CLK_ENABLE; |
| } |
| |
| if (host->plat->translate_vdd) |
| pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd); |
| |
| switch (ios->power_mode) { |
| case MMC_POWER_OFF: |
| break; |
| case MMC_POWER_UP: |
| pwr |= MCI_PWR_UP; |
| break; |
| case MMC_POWER_ON: |
| pwr |= MCI_PWR_ON; |
| break; |
| } |
| |
| if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) |
| pwr |= MCI_ROD; |
| |
| writel(clk, host->base + MMCICLOCK); |
| |
| if (host->pwr != pwr) { |
| host->pwr = pwr; |
| writel(pwr, host->base + MMCIPOWER); |
| } |
| } |
| |
| static struct mmc_host_ops mmci_ops = { |
| .request = mmci_request, |
| .set_ios = mmci_set_ios, |
| }; |
| |
| static void mmci_check_status(unsigned long data) |
| { |
| struct mmci_host *host = (struct mmci_host *)data; |
| unsigned int status; |
| |
| status = host->plat->status(mmc_dev(host->mmc)); |
| if (status ^ host->oldstat) |
| mmc_detect_change(host->mmc, 0); |
| |
| host->oldstat = status; |
| mod_timer(&host->timer, jiffies + HZ); |
| } |
| |
| static int mmci_probe(struct amba_device *dev, void *id) |
| { |
| struct mmc_platform_data *plat = dev->dev.platform_data; |
| struct mmci_host *host; |
| struct mmc_host *mmc; |
| int ret; |
| |
| /* must have platform data */ |
| if (!plat) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| ret = amba_request_regions(dev, DRIVER_NAME); |
| if (ret) |
| goto out; |
| |
| mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev); |
| if (!mmc) { |
| ret = -ENOMEM; |
| goto rel_regions; |
| } |
| |
| host = mmc_priv(mmc); |
| host->clk = clk_get(&dev->dev, "MCLK"); |
| if (IS_ERR(host->clk)) { |
| ret = PTR_ERR(host->clk); |
| host->clk = NULL; |
| goto host_free; |
| } |
| |
| ret = clk_enable(host->clk); |
| if (ret) |
| goto clk_free; |
| |
| host->plat = plat; |
| host->mclk = clk_get_rate(host->clk); |
| host->mmc = mmc; |
| host->base = ioremap(dev->res.start, SZ_4K); |
| if (!host->base) { |
| ret = -ENOMEM; |
| goto clk_disable; |
| } |
| |
| mmc->ops = &mmci_ops; |
| mmc->f_min = (host->mclk + 511) / 512; |
| mmc->f_max = min(host->mclk, fmax); |
| mmc->ocr_avail = plat->ocr_mask; |
| |
| /* |
| * We can do SGIO |
| */ |
| mmc->max_hw_segs = 16; |
| mmc->max_phys_segs = NR_SG; |
| |
| /* |
| * Since we only have a 16-bit data length register, we must |
| * ensure that we don't exceed 2^16-1 bytes in a single request. |
| * Choose 64 (512-byte) sectors as the limit. |
| */ |
| mmc->max_sectors = 64; |
| |
| /* |
| * Set the maximum segment size. Since we aren't doing DMA |
| * (yet) we are only limited by the data length register. |
| */ |
| mmc->max_seg_size = mmc->max_sectors << 9; |
| |
| spin_lock_init(&host->lock); |
| |
| writel(0, host->base + MMCIMASK0); |
| writel(0, host->base + MMCIMASK1); |
| writel(0xfff, host->base + MMCICLEAR); |
| |
| ret = request_irq(dev->irq[0], mmci_irq, SA_SHIRQ, DRIVER_NAME " (cmd)", host); |
| if (ret) |
| goto unmap; |
| |
| ret = request_irq(dev->irq[1], mmci_pio_irq, SA_SHIRQ, DRIVER_NAME " (pio)", host); |
| if (ret) |
| goto irq0_free; |
| |
| writel(MCI_IRQENABLE, host->base + MMCIMASK0); |
| |
| amba_set_drvdata(dev, mmc); |
| |
| mmc_add_host(mmc); |
| |
| printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n", |
| mmc_hostname(mmc), amba_rev(dev), amba_config(dev), |
| (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); |
| |
| init_timer(&host->timer); |
| host->timer.data = (unsigned long)host; |
| host->timer.function = mmci_check_status; |
| host->timer.expires = jiffies + HZ; |
| add_timer(&host->timer); |
| |
| return 0; |
| |
| irq0_free: |
| free_irq(dev->irq[0], host); |
| unmap: |
| iounmap(host->base); |
| clk_disable: |
| clk_disable(host->clk); |
| clk_free: |
| clk_put(host->clk); |
| host_free: |
| mmc_free_host(mmc); |
| rel_regions: |
| amba_release_regions(dev); |
| out: |
| return ret; |
| } |
| |
| static int mmci_remove(struct amba_device *dev) |
| { |
| struct mmc_host *mmc = amba_get_drvdata(dev); |
| |
| amba_set_drvdata(dev, NULL); |
| |
| if (mmc) { |
| struct mmci_host *host = mmc_priv(mmc); |
| |
| del_timer_sync(&host->timer); |
| |
| mmc_remove_host(mmc); |
| |
| writel(0, host->base + MMCIMASK0); |
| writel(0, host->base + MMCIMASK1); |
| |
| writel(0, host->base + MMCICOMMAND); |
| writel(0, host->base + MMCIDATACTRL); |
| |
| free_irq(dev->irq[0], host); |
| free_irq(dev->irq[1], host); |
| |
| iounmap(host->base); |
| clk_disable(host->clk); |
| clk_put(host->clk); |
| |
| mmc_free_host(mmc); |
| |
| amba_release_regions(dev); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int mmci_suspend(struct amba_device *dev, pm_message_t state) |
| { |
| struct mmc_host *mmc = amba_get_drvdata(dev); |
| int ret = 0; |
| |
| if (mmc) { |
| struct mmci_host *host = mmc_priv(mmc); |
| |
| ret = mmc_suspend_host(mmc, state); |
| if (ret == 0) |
| writel(0, host->base + MMCIMASK0); |
| } |
| |
| return ret; |
| } |
| |
| static int mmci_resume(struct amba_device *dev) |
| { |
| struct mmc_host *mmc = amba_get_drvdata(dev); |
| int ret = 0; |
| |
| if (mmc) { |
| struct mmci_host *host = mmc_priv(mmc); |
| |
| writel(MCI_IRQENABLE, host->base + MMCIMASK0); |
| |
| ret = mmc_resume_host(mmc); |
| } |
| |
| return ret; |
| } |
| #else |
| #define mmci_suspend NULL |
| #define mmci_resume NULL |
| #endif |
| |
| static struct amba_id mmci_ids[] = { |
| { |
| .id = 0x00041180, |
| .mask = 0x000fffff, |
| }, |
| { |
| .id = 0x00041181, |
| .mask = 0x000fffff, |
| }, |
| { 0, 0 }, |
| }; |
| |
| static struct amba_driver mmci_driver = { |
| .drv = { |
| .name = DRIVER_NAME, |
| }, |
| .probe = mmci_probe, |
| .remove = mmci_remove, |
| .suspend = mmci_suspend, |
| .resume = mmci_resume, |
| .id_table = mmci_ids, |
| }; |
| |
| static int __init mmci_init(void) |
| { |
| return amba_driver_register(&mmci_driver); |
| } |
| |
| static void __exit mmci_exit(void) |
| { |
| amba_driver_unregister(&mmci_driver); |
| } |
| |
| module_init(mmci_init); |
| module_exit(mmci_exit); |
| module_param(fmax, uint, 0444); |
| |
| MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver"); |
| MODULE_LICENSE("GPL"); |