| Static Keys |
| ----------- |
| |
| By: Jason Baron <jbaron@redhat.com> |
| |
| 0) Abstract |
| |
| Static keys allows the inclusion of seldom used features in |
| performance-sensitive fast-path kernel code, via a GCC feature and a code |
| patching technique. A quick example: |
| |
| struct static_key key = STATIC_KEY_INIT_FALSE; |
| |
| ... |
| |
| if (static_key_false(&key)) |
| do unlikely code |
| else |
| do likely code |
| |
| ... |
| static_key_slow_inc(); |
| ... |
| static_key_slow_inc(); |
| ... |
| |
| The static_key_false() branch will be generated into the code with as little |
| impact to the likely code path as possible. |
| |
| |
| 1) Motivation |
| |
| |
| Currently, tracepoints are implemented using a conditional branch. The |
| conditional check requires checking a global variable for each tracepoint. |
| Although the overhead of this check is small, it increases when the memory |
| cache comes under pressure (memory cache lines for these global variables may |
| be shared with other memory accesses). As we increase the number of tracepoints |
| in the kernel this overhead may become more of an issue. In addition, |
| tracepoints are often dormant (disabled) and provide no direct kernel |
| functionality. Thus, it is highly desirable to reduce their impact as much as |
| possible. Although tracepoints are the original motivation for this work, other |
| kernel code paths should be able to make use of the static keys facility. |
| |
| |
| 2) Solution |
| |
| |
| gcc (v4.5) adds a new 'asm goto' statement that allows branching to a label: |
| |
| http://gcc.gnu.org/ml/gcc-patches/2009-07/msg01556.html |
| |
| Using the 'asm goto', we can create branches that are either taken or not taken |
| by default, without the need to check memory. Then, at run-time, we can patch |
| the branch site to change the branch direction. |
| |
| For example, if we have a simple branch that is disabled by default: |
| |
| if (static_key_false(&key)) |
| printk("I am the true branch\n"); |
| |
| Thus, by default the 'printk' will not be emitted. And the code generated will |
| consist of a single atomic 'no-op' instruction (5 bytes on x86), in the |
| straight-line code path. When the branch is 'flipped', we will patch the |
| 'no-op' in the straight-line codepath with a 'jump' instruction to the |
| out-of-line true branch. Thus, changing branch direction is expensive but |
| branch selection is basically 'free'. That is the basic tradeoff of this |
| optimization. |
| |
| This lowlevel patching mechanism is called 'jump label patching', and it gives |
| the basis for the static keys facility. |
| |
| 3) Static key label API, usage and examples: |
| |
| |
| In order to make use of this optimization you must first define a key: |
| |
| struct static_key key; |
| |
| Which is initialized as: |
| |
| struct static_key key = STATIC_KEY_INIT_TRUE; |
| |
| or: |
| |
| struct static_key key = STATIC_KEY_INIT_FALSE; |
| |
| If the key is not initialized, it is default false. The 'struct static_key', |
| must be a 'global'. That is, it can't be allocated on the stack or dynamically |
| allocated at run-time. |
| |
| The key is then used in code as: |
| |
| if (static_key_false(&key)) |
| do unlikely code |
| else |
| do likely code |
| |
| Or: |
| |
| if (static_key_true(&key)) |
| do likely code |
| else |
| do unlikely code |
| |
| A key that is initialized via 'STATIC_KEY_INIT_FALSE', must be used in a |
| 'static_key_false()' construct. Likewise, a key initialized via |
| 'STATIC_KEY_INIT_TRUE' must be used in a 'static_key_true()' construct. A |
| single key can be used in many branches, but all the branches must match the |
| way that the key has been initialized. |
| |
| The branch(es) can then be switched via: |
| |
| static_key_slow_inc(&key); |
| ... |
| static_key_slow_dec(&key); |
| |
| Thus, 'static_key_slow_inc()' means 'make the branch true', and |
| 'static_key_slow_dec()' means 'make the the branch false' with appropriate |
| reference counting. For example, if the key is initialized true, a |
| static_key_slow_dec(), will switch the branch to false. And a subsequent |
| static_key_slow_inc(), will change the branch back to true. Likewise, if the |
| key is initialized false, a 'static_key_slow_inc()', will change the branch to |
| true. And then a 'static_key_slow_dec()', will again make the branch false. |
| |
| An example usage in the kernel is the implementation of tracepoints: |
| |
| static inline void trace_##name(proto) \ |
| { \ |
| if (static_key_false(&__tracepoint_##name.key)) \ |
| __DO_TRACE(&__tracepoint_##name, \ |
| TP_PROTO(data_proto), \ |
| TP_ARGS(data_args), \ |
| TP_CONDITION(cond)); \ |
| } |
| |
| Tracepoints are disabled by default, and can be placed in performance critical |
| pieces of the kernel. Thus, by using a static key, the tracepoints can have |
| absolutely minimal impact when not in use. |
| |
| |
| 4) Architecture level code patching interface, 'jump labels' |
| |
| |
| There are a few functions and macros that architectures must implement in order |
| to take advantage of this optimization. If there is no architecture support, we |
| simply fall back to a traditional, load, test, and jump sequence. |
| |
| * select HAVE_ARCH_JUMP_LABEL, see: arch/x86/Kconfig |
| |
| * #define JUMP_LABEL_NOP_SIZE, see: arch/x86/include/asm/jump_label.h |
| |
| * __always_inline bool arch_static_branch(struct static_key *key), see: |
| arch/x86/include/asm/jump_label.h |
| |
| * void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type), |
| see: arch/x86/kernel/jump_label.c |
| |
| * __init_or_module void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type), |
| see: arch/x86/kernel/jump_label.c |
| |
| |
| * struct jump_entry, see: arch/x86/include/asm/jump_label.h |
| |
| |
| 5) Static keys / jump label analysis, results (x86_64): |
| |
| |
| As an example, let's add the following branch to 'getppid()', such that the |
| system call now looks like: |
| |
| SYSCALL_DEFINE0(getppid) |
| { |
| int pid; |
| |
| + if (static_key_false(&key)) |
| + printk("I am the true branch\n"); |
| |
| rcu_read_lock(); |
| pid = task_tgid_vnr(rcu_dereference(current->real_parent)); |
| rcu_read_unlock(); |
| |
| return pid; |
| } |
| |
| The resulting instructions with jump labels generated by GCC is: |
| |
| ffffffff81044290 <sys_getppid>: |
| ffffffff81044290: 55 push %rbp |
| ffffffff81044291: 48 89 e5 mov %rsp,%rbp |
| ffffffff81044294: e9 00 00 00 00 jmpq ffffffff81044299 <sys_getppid+0x9> |
| ffffffff81044299: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax |
| ffffffff810442a0: 00 00 |
| ffffffff810442a2: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax |
| ffffffff810442a9: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax |
| ffffffff810442b0: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi |
| ffffffff810442b7: e8 f4 d9 00 00 callq ffffffff81051cb0 <pid_vnr> |
| ffffffff810442bc: 5d pop %rbp |
| ffffffff810442bd: 48 98 cltq |
| ffffffff810442bf: c3 retq |
| ffffffff810442c0: 48 c7 c7 e3 54 98 81 mov $0xffffffff819854e3,%rdi |
| ffffffff810442c7: 31 c0 xor %eax,%eax |
| ffffffff810442c9: e8 71 13 6d 00 callq ffffffff8171563f <printk> |
| ffffffff810442ce: eb c9 jmp ffffffff81044299 <sys_getppid+0x9> |
| |
| Without the jump label optimization it looks like: |
| |
| ffffffff810441f0 <sys_getppid>: |
| ffffffff810441f0: 8b 05 8a 52 d8 00 mov 0xd8528a(%rip),%eax # ffffffff81dc9480 <key> |
| ffffffff810441f6: 55 push %rbp |
| ffffffff810441f7: 48 89 e5 mov %rsp,%rbp |
| ffffffff810441fa: 85 c0 test %eax,%eax |
| ffffffff810441fc: 75 27 jne ffffffff81044225 <sys_getppid+0x35> |
| ffffffff810441fe: 65 48 8b 04 25 c0 b6 mov %gs:0xb6c0,%rax |
| ffffffff81044205: 00 00 |
| ffffffff81044207: 48 8b 80 80 02 00 00 mov 0x280(%rax),%rax |
| ffffffff8104420e: 48 8b 80 b0 02 00 00 mov 0x2b0(%rax),%rax |
| ffffffff81044215: 48 8b b8 e8 02 00 00 mov 0x2e8(%rax),%rdi |
| ffffffff8104421c: e8 2f da 00 00 callq ffffffff81051c50 <pid_vnr> |
| ffffffff81044221: 5d pop %rbp |
| ffffffff81044222: 48 98 cltq |
| ffffffff81044224: c3 retq |
| ffffffff81044225: 48 c7 c7 13 53 98 81 mov $0xffffffff81985313,%rdi |
| ffffffff8104422c: 31 c0 xor %eax,%eax |
| ffffffff8104422e: e8 60 0f 6d 00 callq ffffffff81715193 <printk> |
| ffffffff81044233: eb c9 jmp ffffffff810441fe <sys_getppid+0xe> |
| ffffffff81044235: 66 66 2e 0f 1f 84 00 data32 nopw %cs:0x0(%rax,%rax,1) |
| ffffffff8104423c: 00 00 00 00 |
| |
| Thus, the disable jump label case adds a 'mov', 'test' and 'jne' instruction |
| vs. the jump label case just has a 'no-op' or 'jmp 0'. (The jmp 0, is patched |
| to a 5 byte atomic no-op instruction at boot-time.) Thus, the disabled jump |
| label case adds: |
| |
| 6 (mov) + 2 (test) + 2 (jne) = 10 - 5 (5 byte jump 0) = 5 addition bytes. |
| |
| If we then include the padding bytes, the jump label code saves, 16 total bytes |
| of instruction memory for this small fucntion. In this case the non-jump label |
| function is 80 bytes long. Thus, we have have saved 20% of the instruction |
| footprint. We can in fact improve this even further, since the 5-byte no-op |
| really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp. |
| However, we have not yet implemented optimal no-op sizes (they are currently |
| hard-coded). |
| |
| Since there are a number of static key API uses in the scheduler paths, |
| 'pipe-test' (also known as 'perf bench sched pipe') can be used to show the |
| performance improvement. Testing done on 3.3.0-rc2: |
| |
| jump label disabled: |
| |
| Performance counter stats for 'bash -c /tmp/pipe-test' (50 runs): |
| |
| 855.700314 task-clock # 0.534 CPUs utilized ( +- 0.11% ) |
| 200,003 context-switches # 0.234 M/sec ( +- 0.00% ) |
| 0 CPU-migrations # 0.000 M/sec ( +- 39.58% ) |
| 487 page-faults # 0.001 M/sec ( +- 0.02% ) |
| 1,474,374,262 cycles # 1.723 GHz ( +- 0.17% ) |
| <not supported> stalled-cycles-frontend |
| <not supported> stalled-cycles-backend |
| 1,178,049,567 instructions # 0.80 insns per cycle ( +- 0.06% ) |
| 208,368,926 branches # 243.507 M/sec ( +- 0.06% ) |
| 5,569,188 branch-misses # 2.67% of all branches ( +- 0.54% ) |
| |
| 1.601607384 seconds time elapsed ( +- 0.07% ) |
| |
| jump label enabled: |
| |
| Performance counter stats for 'bash -c /tmp/pipe-test' (50 runs): |
| |
| 841.043185 task-clock # 0.533 CPUs utilized ( +- 0.12% ) |
| 200,004 context-switches # 0.238 M/sec ( +- 0.00% ) |
| 0 CPU-migrations # 0.000 M/sec ( +- 40.87% ) |
| 487 page-faults # 0.001 M/sec ( +- 0.05% ) |
| 1,432,559,428 cycles # 1.703 GHz ( +- 0.18% ) |
| <not supported> stalled-cycles-frontend |
| <not supported> stalled-cycles-backend |
| 1,175,363,994 instructions # 0.82 insns per cycle ( +- 0.04% ) |
| 206,859,359 branches # 245.956 M/sec ( +- 0.04% ) |
| 4,884,119 branch-misses # 2.36% of all branches ( +- 0.85% ) |
| |
| 1.579384366 seconds time elapsed |
| |
| The percentage of saved branches is .7%, and we've saved 12% on |
| 'branch-misses'. This is where we would expect to get the most savings, since |
| this optimization is about reducing the number of branches. In addition, we've |
| saved .2% on instructions, and 2.8% on cycles and 1.4% on elapsed time. |