| /* |
| * da9063-core.c: Device access for Dialog DA9063 modules |
| * |
| * Copyright 2012 Dialog Semiconductors Ltd. |
| * Copyright 2013 Philipp Zabel, Pengutronix |
| * |
| * Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>, |
| * Michal Hajduk <michal.hajduk@diasemi.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/mutex.h> |
| #include <linux/mfd/core.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/mfd/da9063/core.h> |
| #include <linux/mfd/da9063/pdata.h> |
| #include <linux/mfd/da9063/registers.h> |
| |
| #include <linux/proc_fs.h> |
| #include <linux/kthread.h> |
| #include <linux/uaccess.h> |
| |
| |
| static struct resource da9063_regulators_resources[] = { |
| { |
| .name = "LDO_LIM", |
| .start = DA9063_IRQ_LDO_LIM, |
| .end = DA9063_IRQ_LDO_LIM, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource da9063_rtc_resources[] = { |
| { |
| .name = "ALARM", |
| .start = DA9063_IRQ_ALARM, |
| .end = DA9063_IRQ_ALARM, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .name = "TICK", |
| .start = DA9063_IRQ_TICK, |
| .end = DA9063_IRQ_TICK, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct resource da9063_onkey_resources[] = { |
| { |
| .name = "ONKEY", |
| .start = DA9063_IRQ_ONKEY, |
| .end = DA9063_IRQ_ONKEY, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct resource da9063_hwmon_resources[] = { |
| { |
| .start = DA9063_IRQ_ADC_RDY, |
| .end = DA9063_IRQ_ADC_RDY, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| |
| static const struct mfd_cell da9063_devs[] = { |
| { |
| .name = DA9063_DRVNAME_REGULATORS, |
| .num_resources = ARRAY_SIZE(da9063_regulators_resources), |
| .resources = da9063_regulators_resources, |
| }, |
| { |
| .name = DA9063_DRVNAME_LEDS, |
| }, |
| { |
| .name = DA9063_DRVNAME_WATCHDOG, |
| .of_compatible = "dlg,da9063-watchdog", |
| }, |
| { |
| .name = DA9063_DRVNAME_HWMON, |
| .num_resources = ARRAY_SIZE(da9063_hwmon_resources), |
| .resources = da9063_hwmon_resources, |
| }, |
| { |
| .name = DA9063_DRVNAME_ONKEY, |
| .num_resources = ARRAY_SIZE(da9063_onkey_resources), |
| .resources = da9063_onkey_resources, |
| .of_compatible = "dlg,da9063-onkey", |
| }, |
| { |
| .name = DA9063_DRVNAME_RTC, |
| .num_resources = ARRAY_SIZE(da9063_rtc_resources), |
| .resources = da9063_rtc_resources, |
| .of_compatible = "dlg,da9063-rtc", |
| }, |
| { |
| .name = DA9063_DRVNAME_VIBRATION, |
| }, |
| }; |
| |
| static int da9063_clear_fault_log(struct da9063 *da9063) |
| { |
| int ret = 0; |
| int fault_log = 0; |
| |
| ret = regmap_read(da9063->regmap, DA9063_REG_FAULT_LOG, &fault_log); |
| if (ret < 0) { |
| dev_err(da9063->dev, "Cannot read FAULT_LOG.\n"); |
| return -EIO; |
| } |
| |
| if (fault_log) { |
| if (fault_log & DA9063_TWD_ERROR) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_TWD_ERROR\n"); |
| if (fault_log & DA9063_POR) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_POR\n"); |
| if (fault_log & DA9063_VDD_FAULT) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_VDD_FAULT\n"); |
| if (fault_log & DA9063_VDD_START) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_VDD_START\n"); |
| if (fault_log & DA9063_TEMP_CRIT) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_TEMP_CRIT\n"); |
| if (fault_log & DA9063_KEY_RESET) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_KEY_RESET\n"); |
| if (fault_log & DA9063_NSHUTDOWN) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_NSHUTDOWN\n"); |
| if (fault_log & DA9063_WAIT_SHUT) |
| dev_dbg(da9063->dev, |
| "Fault log entry detected: DA9063_WAIT_SHUT\n"); |
| } |
| |
| ret = regmap_write(da9063->regmap, |
| DA9063_REG_FAULT_LOG, |
| fault_log); |
| if (ret < 0) |
| dev_err(da9063->dev, |
| "Cannot reset FAULT_LOG values %d\n", ret); |
| |
| return ret; |
| } |
| |
| int da9063_device_init(struct da9063 *da9063, unsigned int irq) |
| { |
| struct da9063_pdata *pdata = da9063->dev->platform_data; |
| int model, variant_id, variant_code; |
| int ret; |
| |
| ret = da9063_clear_fault_log(da9063); |
| if (ret < 0) |
| dev_err(da9063->dev, "Cannot clear fault log\n"); |
| |
| if (pdata) { |
| da9063->flags = pdata->flags; |
| da9063->irq_base = pdata->irq_base; |
| } else { |
| da9063->flags = 0; |
| da9063->irq_base = -1; |
| } |
| da9063->chip_irq = irq; |
| |
| if (pdata && pdata->init != NULL) { |
| ret = pdata->init(da9063); |
| if (ret != 0) { |
| dev_err(da9063->dev, |
| "Platform initialization failed.\n"); |
| return ret; |
| } |
| } |
| |
| ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model); |
| if (ret < 0) { |
| dev_err(da9063->dev, "Cannot read chip model id.\n"); |
| return -EIO; |
| } |
| if (model != PMIC_DA9063) { |
| dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model); |
| return -ENODEV; |
| } |
| |
| ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id); |
| if (ret < 0) { |
| dev_err(da9063->dev, "Cannot read chip variant id.\n"); |
| return -EIO; |
| } |
| |
| variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT; |
| |
| dev_info(da9063->dev, |
| "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", |
| model, variant_id); |
| |
| if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) { |
| dev_err(da9063->dev, |
| "Cannot support variant code: 0x%02X\n", variant_code); |
| return -ENODEV; |
| } |
| |
| da9063->model = model; |
| da9063->variant_code = variant_code; |
| |
| ret = da9063_irq_init(da9063); |
| if (ret) { |
| dev_err(da9063->dev, "Cannot initialize interrupts.\n"); |
| return ret; |
| } |
| |
| da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq); |
| |
| ret = mfd_add_devices(da9063->dev, -1, da9063_devs, |
| ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base, |
| NULL); |
| if (ret) |
| dev_err(da9063->dev, "Cannot add MFD cells\n"); |
| |
| return ret; |
| } |
| |
| void da9063_device_exit(struct da9063 *da9063) |
| { |
| mfd_remove_devices(da9063->dev); |
| da9063_irq_exit(da9063); |
| } |
| |
| MODULE_DESCRIPTION("PMIC driver for Dialog DA9063"); |
| MODULE_AUTHOR("Krystian Garbaciak <krystian.garbaciak@diasemi.com>, Michal Hajduk <michal.hajduk@diasemi.com>"); |
| MODULE_LICENSE("GPL"); |