| /** |
| * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI |
| * |
| * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com |
| * Author: Keshava Munegowda <keshava_mgowda@ti.com> |
| * Author: Roger Quadros <rogerq@ti.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/gpio.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/usb-omap.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/err.h> |
| |
| #include "omap-usb.h" |
| |
| #define USBHS_DRIVER_NAME "usbhs_omap" |
| #define OMAP_EHCI_DEVICE "ehci-omap" |
| #define OMAP_OHCI_DEVICE "ohci-omap3" |
| |
| /* OMAP USBHOST Register addresses */ |
| |
| /* UHH Register Set */ |
| #define OMAP_UHH_REVISION (0x00) |
| #define OMAP_UHH_SYSCONFIG (0x10) |
| #define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) |
| #define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) |
| #define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) |
| #define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) |
| #define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) |
| #define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) |
| |
| #define OMAP_UHH_SYSSTATUS (0x14) |
| #define OMAP_UHH_HOSTCONFIG (0x40) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) |
| #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) |
| #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) |
| #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) |
| #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) |
| #define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) |
| #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) |
| #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) |
| #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) |
| |
| /* OMAP4-specific defines */ |
| #define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) |
| #define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) |
| #define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) |
| #define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) |
| #define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) |
| |
| #define OMAP4_P1_MODE_CLEAR (3 << 16) |
| #define OMAP4_P1_MODE_TLL (1 << 16) |
| #define OMAP4_P1_MODE_HSIC (3 << 16) |
| #define OMAP4_P2_MODE_CLEAR (3 << 18) |
| #define OMAP4_P2_MODE_TLL (1 << 18) |
| #define OMAP4_P2_MODE_HSIC (3 << 18) |
| |
| #define OMAP_UHH_DEBUG_CSR (0x44) |
| |
| /* Values of UHH_REVISION - Note: these are not given in the TRM */ |
| #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ |
| #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ |
| |
| #define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1) |
| #define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2) |
| |
| #define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) |
| #define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) |
| #define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) |
| |
| |
| struct usbhs_hcd_omap { |
| int nports; |
| struct clk **utmi_clk; |
| struct clk **hsic60m_clk; |
| struct clk **hsic480m_clk; |
| |
| struct clk *xclk60mhsp1_ck; |
| struct clk *xclk60mhsp2_ck; |
| struct clk *utmi_p1_gfclk; |
| struct clk *utmi_p2_gfclk; |
| struct clk *init_60m_fclk; |
| struct clk *ehci_logic_fck; |
| |
| void __iomem *uhh_base; |
| |
| struct usbhs_omap_platform_data *pdata; |
| |
| u32 usbhs_rev; |
| }; |
| /*-------------------------------------------------------------------------*/ |
| |
| static const char usbhs_driver_name[] = USBHS_DRIVER_NAME; |
| static u64 usbhs_dmamask = DMA_BIT_MASK(32); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) |
| { |
| writel_relaxed(val, base + reg); |
| } |
| |
| static inline u32 usbhs_read(void __iomem *base, u32 reg) |
| { |
| return readl_relaxed(base + reg); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /** |
| * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h> |
| * to the device tree binding portN-mode found in |
| * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' |
| */ |
| static const char * const port_modes[] = { |
| [OMAP_USBHS_PORT_MODE_UNUSED] = "", |
| [OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy", |
| [OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll", |
| [OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic", |
| [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0", |
| [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm", |
| [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0", |
| [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm", |
| [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0", |
| [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm", |
| [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0", |
| [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm", |
| [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0", |
| [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm", |
| }; |
| |
| /** |
| * omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode' |
| * from the port mode string. |
| * @mode: The port mode string, usually obtained from device tree. |
| * |
| * The function returns the 'enum usbhs_omap_port_mode' that matches the |
| * provided port mode string as per the port_modes table. |
| * If no match is found it returns -ENODEV |
| */ |
| static const int omap_usbhs_get_dt_port_mode(const char *mode) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(port_modes); i++) { |
| if (!strcmp(mode, port_modes[i])) |
| return i; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static struct platform_device *omap_usbhs_alloc_child(const char *name, |
| struct resource *res, int num_resources, void *pdata, |
| size_t pdata_size, struct device *dev) |
| { |
| struct platform_device *child; |
| int ret; |
| |
| child = platform_device_alloc(name, 0); |
| |
| if (!child) { |
| dev_err(dev, "platform_device_alloc %s failed\n", name); |
| goto err_end; |
| } |
| |
| ret = platform_device_add_resources(child, res, num_resources); |
| if (ret) { |
| dev_err(dev, "platform_device_add_resources failed\n"); |
| goto err_alloc; |
| } |
| |
| ret = platform_device_add_data(child, pdata, pdata_size); |
| if (ret) { |
| dev_err(dev, "platform_device_add_data failed\n"); |
| goto err_alloc; |
| } |
| |
| child->dev.dma_mask = &usbhs_dmamask; |
| dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32)); |
| child->dev.parent = dev; |
| |
| ret = platform_device_add(child); |
| if (ret) { |
| dev_err(dev, "platform_device_add failed\n"); |
| goto err_alloc; |
| } |
| |
| return child; |
| |
| err_alloc: |
| platform_device_put(child); |
| |
| err_end: |
| return NULL; |
| } |
| |
| static int omap_usbhs_alloc_children(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); |
| struct platform_device *ehci; |
| struct platform_device *ohci; |
| struct resource *res; |
| struct resource resources[2]; |
| int ret; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); |
| if (!res) { |
| dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); |
| ret = -ENODEV; |
| goto err_end; |
| } |
| resources[0] = *res; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); |
| if (!res) { |
| dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); |
| ret = -ENODEV; |
| goto err_end; |
| } |
| resources[1] = *res; |
| |
| ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata, |
| sizeof(*pdata), dev); |
| |
| if (!ehci) { |
| dev_err(dev, "omap_usbhs_alloc_child failed\n"); |
| ret = -ENOMEM; |
| goto err_end; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); |
| if (!res) { |
| dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); |
| ret = -ENODEV; |
| goto err_ehci; |
| } |
| resources[0] = *res; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); |
| if (!res) { |
| dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); |
| ret = -ENODEV; |
| goto err_ehci; |
| } |
| resources[1] = *res; |
| |
| ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata, |
| sizeof(*pdata), dev); |
| if (!ohci) { |
| dev_err(dev, "omap_usbhs_alloc_child failed\n"); |
| ret = -ENOMEM; |
| goto err_ehci; |
| } |
| |
| return 0; |
| |
| err_ehci: |
| platform_device_unregister(ehci); |
| |
| err_end: |
| return ret; |
| } |
| |
| static bool is_ohci_port(enum usbhs_omap_port_mode pmode) |
| { |
| switch (pmode) { |
| case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: |
| case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: |
| case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| static int usbhs_runtime_resume(struct device *dev) |
| { |
| struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| struct usbhs_omap_platform_data *pdata = omap->pdata; |
| int i, r; |
| |
| dev_dbg(dev, "usbhs_runtime_resume\n"); |
| |
| omap_tll_enable(pdata); |
| |
| if (!IS_ERR(omap->ehci_logic_fck)) |
| clk_prepare_enable(omap->ehci_logic_fck); |
| |
| for (i = 0; i < omap->nports; i++) { |
| switch (pdata->port_mode[i]) { |
| case OMAP_EHCI_PORT_MODE_HSIC: |
| if (!IS_ERR(omap->hsic60m_clk[i])) { |
| r = clk_prepare_enable(omap->hsic60m_clk[i]); |
| if (r) { |
| dev_err(dev, |
| "Can't enable port %d hsic60m clk:%d\n", |
| i, r); |
| } |
| } |
| |
| if (!IS_ERR(omap->hsic480m_clk[i])) { |
| r = clk_prepare_enable(omap->hsic480m_clk[i]); |
| if (r) { |
| dev_err(dev, |
| "Can't enable port %d hsic480m clk:%d\n", |
| i, r); |
| } |
| } |
| /* Fall through as HSIC mode needs utmi_clk */ |
| |
| case OMAP_EHCI_PORT_MODE_TLL: |
| if (!IS_ERR(omap->utmi_clk[i])) { |
| r = clk_prepare_enable(omap->utmi_clk[i]); |
| if (r) { |
| dev_err(dev, |
| "Can't enable port %d clk : %d\n", |
| i, r); |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int usbhs_runtime_suspend(struct device *dev) |
| { |
| struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| struct usbhs_omap_platform_data *pdata = omap->pdata; |
| int i; |
| |
| dev_dbg(dev, "usbhs_runtime_suspend\n"); |
| |
| for (i = 0; i < omap->nports; i++) { |
| switch (pdata->port_mode[i]) { |
| case OMAP_EHCI_PORT_MODE_HSIC: |
| if (!IS_ERR(omap->hsic60m_clk[i])) |
| clk_disable_unprepare(omap->hsic60m_clk[i]); |
| |
| if (!IS_ERR(omap->hsic480m_clk[i])) |
| clk_disable_unprepare(omap->hsic480m_clk[i]); |
| /* Fall through as utmi_clks were used in HSIC mode */ |
| |
| case OMAP_EHCI_PORT_MODE_TLL: |
| if (!IS_ERR(omap->utmi_clk[i])) |
| clk_disable_unprepare(omap->utmi_clk[i]); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (!IS_ERR(omap->ehci_logic_fck)) |
| clk_disable_unprepare(omap->ehci_logic_fck); |
| |
| omap_tll_disable(pdata); |
| |
| return 0; |
| } |
| |
| static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap, |
| unsigned reg) |
| { |
| struct usbhs_omap_platform_data *pdata = omap->pdata; |
| int i; |
| |
| for (i = 0; i < omap->nports; i++) { |
| switch (pdata->port_mode[i]) { |
| case OMAP_USBHS_PORT_MODE_UNUSED: |
| reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i); |
| break; |
| case OMAP_EHCI_PORT_MODE_PHY: |
| if (pdata->single_ulpi_bypass) |
| break; |
| |
| if (i == 0) |
| reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; |
| else |
| reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS |
| << (i-1)); |
| break; |
| default: |
| if (pdata->single_ulpi_bypass) |
| break; |
| |
| if (i == 0) |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; |
| else |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS |
| << (i-1); |
| break; |
| } |
| } |
| |
| if (pdata->single_ulpi_bypass) { |
| /* bypass ULPI only if none of the ports use PHY mode */ |
| reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; |
| |
| for (i = 0; i < omap->nports; i++) { |
| if (is_ehci_phy_mode(pdata->port_mode[i])) { |
| reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; |
| break; |
| } |
| } |
| } |
| |
| return reg; |
| } |
| |
| static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap, |
| unsigned reg) |
| { |
| struct usbhs_omap_platform_data *pdata = omap->pdata; |
| int i; |
| |
| for (i = 0; i < omap->nports; i++) { |
| /* Clear port mode fields for PHY mode */ |
| reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i); |
| |
| if (is_ehci_tll_mode(pdata->port_mode[i]) || |
| (is_ohci_port(pdata->port_mode[i]))) |
| reg |= OMAP4_P1_MODE_TLL << 2 * i; |
| else if (is_ehci_hsic_mode(pdata->port_mode[i])) |
| reg |= OMAP4_P1_MODE_HSIC << 2 * i; |
| } |
| |
| return reg; |
| } |
| |
| static void omap_usbhs_init(struct device *dev) |
| { |
| struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); |
| unsigned reg; |
| |
| dev_dbg(dev, "starting TI HSUSB Controller\n"); |
| |
| pm_runtime_get_sync(dev); |
| |
| reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); |
| /* setup ULPI bypass and burst configurations */ |
| reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN |
| | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN |
| | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); |
| reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; |
| reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; |
| |
| switch (omap->usbhs_rev) { |
| case OMAP_USBHS_REV1: |
| reg = omap_usbhs_rev1_hostconfig(omap, reg); |
| break; |
| |
| case OMAP_USBHS_REV2: |
| reg = omap_usbhs_rev2_hostconfig(omap, reg); |
| break; |
| |
| default: /* newer revisions */ |
| reg = omap_usbhs_rev2_hostconfig(omap, reg); |
| break; |
| } |
| |
| usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); |
| dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); |
| |
| pm_runtime_put_sync(dev); |
| } |
| |
| static int usbhs_omap_get_dt_pdata(struct device *dev, |
| struct usbhs_omap_platform_data *pdata) |
| { |
| int ret, i; |
| struct device_node *node = dev->of_node; |
| |
| ret = of_property_read_u32(node, "num-ports", &pdata->nports); |
| if (ret) |
| pdata->nports = 0; |
| |
| if (pdata->nports > OMAP3_HS_USB_PORTS) { |
| dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n", |
| pdata->nports, OMAP3_HS_USB_PORTS); |
| return -ENODEV; |
| } |
| |
| /* get port modes */ |
| for (i = 0; i < OMAP3_HS_USB_PORTS; i++) { |
| char prop[11]; |
| const char *mode; |
| |
| pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED; |
| |
| snprintf(prop, sizeof(prop), "port%d-mode", i + 1); |
| ret = of_property_read_string(node, prop, &mode); |
| if (ret < 0) |
| continue; |
| |
| ret = omap_usbhs_get_dt_port_mode(mode); |
| if (ret < 0) { |
| dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n", |
| i, mode); |
| return -ENODEV; |
| } |
| |
| dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret); |
| pdata->port_mode[i] = ret; |
| } |
| |
| /* get flags */ |
| pdata->single_ulpi_bypass = of_property_read_bool(node, |
| "single-ulpi-bypass"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id usbhs_child_match_table[] = { |
| { .compatible = "ti,omap-ehci", }, |
| { .compatible = "ti,omap-ohci", }, |
| { } |
| }; |
| |
| /** |
| * usbhs_omap_probe - initialize TI-based HCDs |
| * |
| * Allocates basic resources for this USB host controller. |
| */ |
| static int usbhs_omap_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); |
| struct usbhs_hcd_omap *omap; |
| struct resource *res; |
| int ret = 0; |
| int i; |
| bool need_logic_fck; |
| |
| if (dev->of_node) { |
| /* For DT boot we populate platform data from OF node */ |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| ret = usbhs_omap_get_dt_pdata(dev, pdata); |
| if (ret) |
| return ret; |
| |
| dev->platform_data = pdata; |
| } |
| |
| if (!pdata) { |
| dev_err(dev, "Missing platform data\n"); |
| return -ENODEV; |
| } |
| |
| if (pdata->nports > OMAP3_HS_USB_PORTS) { |
| dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n", |
| pdata->nports, OMAP3_HS_USB_PORTS); |
| return -ENODEV; |
| } |
| |
| omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); |
| if (!omap) { |
| dev_err(dev, "Memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| omap->uhh_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(omap->uhh_base)) |
| return PTR_ERR(omap->uhh_base); |
| |
| omap->pdata = pdata; |
| |
| /* Initialize the TLL subsystem */ |
| omap_tll_init(pdata); |
| |
| pm_runtime_enable(dev); |
| |
| platform_set_drvdata(pdev, omap); |
| pm_runtime_get_sync(dev); |
| |
| omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); |
| |
| /* we need to call runtime suspend before we update omap->nports |
| * to prevent unbalanced clk_disable() |
| */ |
| pm_runtime_put_sync(dev); |
| |
| /* |
| * If platform data contains nports then use that |
| * else make out number of ports from USBHS revision |
| */ |
| if (pdata->nports) { |
| omap->nports = pdata->nports; |
| } else { |
| switch (omap->usbhs_rev) { |
| case OMAP_USBHS_REV1: |
| omap->nports = 3; |
| break; |
| case OMAP_USBHS_REV2: |
| omap->nports = 2; |
| break; |
| default: |
| omap->nports = OMAP3_HS_USB_PORTS; |
| dev_dbg(dev, |
| "USB HOST Rev:0x%x not recognized, assuming %d ports\n", |
| omap->usbhs_rev, omap->nports); |
| break; |
| } |
| pdata->nports = omap->nports; |
| } |
| |
| i = sizeof(struct clk *) * omap->nports; |
| omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL); |
| omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL); |
| omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL); |
| |
| if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) { |
| dev_err(dev, "Memory allocation failed\n"); |
| ret = -ENOMEM; |
| goto err_mem; |
| } |
| |
| /* Set all clocks as invalid to begin with */ |
| omap->ehci_logic_fck = ERR_PTR(-ENODEV); |
| omap->init_60m_fclk = ERR_PTR(-ENODEV); |
| omap->utmi_p1_gfclk = ERR_PTR(-ENODEV); |
| omap->utmi_p2_gfclk = ERR_PTR(-ENODEV); |
| omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV); |
| omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV); |
| |
| for (i = 0; i < omap->nports; i++) { |
| omap->utmi_clk[i] = ERR_PTR(-ENODEV); |
| omap->hsic480m_clk[i] = ERR_PTR(-ENODEV); |
| omap->hsic60m_clk[i] = ERR_PTR(-ENODEV); |
| } |
| |
| /* for OMAP3 i.e. USBHS REV1 */ |
| if (omap->usbhs_rev == OMAP_USBHS_REV1) { |
| need_logic_fck = false; |
| for (i = 0; i < omap->nports; i++) { |
| if (is_ehci_phy_mode(pdata->port_mode[i]) || |
| is_ehci_tll_mode(pdata->port_mode[i]) || |
| is_ehci_hsic_mode(pdata->port_mode[i])) |
| |
| need_logic_fck |= true; |
| } |
| |
| if (need_logic_fck) { |
| omap->ehci_logic_fck = devm_clk_get(dev, |
| "usbhost_120m_fck"); |
| if (IS_ERR(omap->ehci_logic_fck)) { |
| ret = PTR_ERR(omap->ehci_logic_fck); |
| dev_err(dev, "usbhost_120m_fck failed:%d\n", |
| ret); |
| goto err_mem; |
| } |
| } |
| goto initialize; |
| } |
| |
| /* for OMAP4+ i.e. USBHS REV2+ */ |
| omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk"); |
| if (IS_ERR(omap->utmi_p1_gfclk)) { |
| ret = PTR_ERR(omap->utmi_p1_gfclk); |
| dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); |
| goto err_mem; |
| } |
| |
| omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk"); |
| if (IS_ERR(omap->utmi_p2_gfclk)) { |
| ret = PTR_ERR(omap->utmi_p2_gfclk); |
| dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); |
| goto err_mem; |
| } |
| |
| omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1"); |
| if (IS_ERR(omap->xclk60mhsp1_ck)) { |
| ret = PTR_ERR(omap->xclk60mhsp1_ck); |
| dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret); |
| goto err_mem; |
| } |
| |
| omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2"); |
| if (IS_ERR(omap->xclk60mhsp2_ck)) { |
| ret = PTR_ERR(omap->xclk60mhsp2_ck); |
| dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret); |
| goto err_mem; |
| } |
| |
| omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int"); |
| if (IS_ERR(omap->init_60m_fclk)) { |
| ret = PTR_ERR(omap->init_60m_fclk); |
| dev_err(dev, "refclk_60m_int failed error:%d\n", ret); |
| goto err_mem; |
| } |
| |
| for (i = 0; i < omap->nports; i++) { |
| char clkname[30]; |
| |
| /* clock names are indexed from 1*/ |
| snprintf(clkname, sizeof(clkname), |
| "usb_host_hs_utmi_p%d_clk", i + 1); |
| |
| /* If a clock is not found we won't bail out as not all |
| * platforms have all clocks and we can function without |
| * them |
| */ |
| omap->utmi_clk[i] = devm_clk_get(dev, clkname); |
| if (IS_ERR(omap->utmi_clk[i])) { |
| ret = PTR_ERR(omap->utmi_clk[i]); |
| dev_err(dev, "Failed to get clock : %s : %d\n", |
| clkname, ret); |
| goto err_mem; |
| } |
| |
| snprintf(clkname, sizeof(clkname), |
| "usb_host_hs_hsic480m_p%d_clk", i + 1); |
| omap->hsic480m_clk[i] = devm_clk_get(dev, clkname); |
| if (IS_ERR(omap->hsic480m_clk[i])) { |
| ret = PTR_ERR(omap->hsic480m_clk[i]); |
| dev_err(dev, "Failed to get clock : %s : %d\n", |
| clkname, ret); |
| goto err_mem; |
| } |
| |
| snprintf(clkname, sizeof(clkname), |
| "usb_host_hs_hsic60m_p%d_clk", i + 1); |
| omap->hsic60m_clk[i] = devm_clk_get(dev, clkname); |
| if (IS_ERR(omap->hsic60m_clk[i])) { |
| ret = PTR_ERR(omap->hsic60m_clk[i]); |
| dev_err(dev, "Failed to get clock : %s : %d\n", |
| clkname, ret); |
| goto err_mem; |
| } |
| } |
| |
| if (is_ehci_phy_mode(pdata->port_mode[0])) { |
| ret = clk_set_parent(omap->utmi_p1_gfclk, |
| omap->xclk60mhsp1_ck); |
| if (ret != 0) { |
| dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n", |
| ret); |
| goto err_mem; |
| } |
| } else if (is_ehci_tll_mode(pdata->port_mode[0])) { |
| ret = clk_set_parent(omap->utmi_p1_gfclk, |
| omap->init_60m_fclk); |
| if (ret != 0) { |
| dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n", |
| ret); |
| goto err_mem; |
| } |
| } |
| |
| if (is_ehci_phy_mode(pdata->port_mode[1])) { |
| ret = clk_set_parent(omap->utmi_p2_gfclk, |
| omap->xclk60mhsp2_ck); |
| if (ret != 0) { |
| dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n", |
| ret); |
| goto err_mem; |
| } |
| } else if (is_ehci_tll_mode(pdata->port_mode[1])) { |
| ret = clk_set_parent(omap->utmi_p2_gfclk, |
| omap->init_60m_fclk); |
| if (ret != 0) { |
| dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n", |
| ret); |
| goto err_mem; |
| } |
| } |
| |
| initialize: |
| omap_usbhs_init(dev); |
| |
| if (dev->of_node) { |
| ret = of_platform_populate(dev->of_node, |
| usbhs_child_match_table, NULL, dev); |
| |
| if (ret) { |
| dev_err(dev, "Failed to create DT children: %d\n", ret); |
| goto err_mem; |
| } |
| |
| } else { |
| ret = omap_usbhs_alloc_children(pdev); |
| if (ret) { |
| dev_err(dev, "omap_usbhs_alloc_children failed: %d\n", |
| ret); |
| goto err_mem; |
| } |
| } |
| |
| return 0; |
| |
| err_mem: |
| pm_runtime_disable(dev); |
| |
| return ret; |
| } |
| |
| static int usbhs_omap_remove_child(struct device *dev, void *data) |
| { |
| dev_info(dev, "unregistering\n"); |
| platform_device_unregister(to_platform_device(dev)); |
| return 0; |
| } |
| |
| /** |
| * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs |
| * @pdev: USB Host Controller being removed |
| * |
| * Reverses the effect of usbhs_omap_probe(). |
| */ |
| static int usbhs_omap_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| |
| /* remove children */ |
| device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops usbhsomap_dev_pm_ops = { |
| .runtime_suspend = usbhs_runtime_suspend, |
| .runtime_resume = usbhs_runtime_resume, |
| }; |
| |
| static const struct of_device_id usbhs_omap_dt_ids[] = { |
| { .compatible = "ti,usbhs-host" }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids); |
| |
| |
| static struct platform_driver usbhs_omap_driver = { |
| .driver = { |
| .name = (char *)usbhs_driver_name, |
| .pm = &usbhsomap_dev_pm_ops, |
| .of_match_table = usbhs_omap_dt_ids, |
| }, |
| .remove = usbhs_omap_remove, |
| }; |
| |
| MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); |
| MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); |
| MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); |
| |
| static int __init omap_usbhs_drvinit(void) |
| { |
| return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); |
| } |
| |
| /* |
| * init before ehci and ohci drivers; |
| * The usbhs core driver should be initialized much before |
| * the omap ehci and ohci probe functions are called. |
| * This usbhs core driver should be initialized after |
| * usb tll driver |
| */ |
| fs_initcall_sync(omap_usbhs_drvinit); |
| |
| static void __exit omap_usbhs_drvexit(void) |
| { |
| platform_driver_unregister(&usbhs_omap_driver); |
| } |
| module_exit(omap_usbhs_drvexit); |