| /* |
| Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| /* |
| Module: rt2x00lib |
| Abstract: rt2x00 generic link tuning routines. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| |
| #include "rt2x00.h" |
| #include "rt2x00lib.h" |
| |
| /* |
| * When we lack RSSI information return something less then -80 to |
| * tell the driver to tune the device to maximum sensitivity. |
| */ |
| #define DEFAULT_RSSI -128 |
| |
| /* Constants for EWMA calculations. */ |
| #define RT2X00_EWMA_FACTOR 1024 |
| #define RT2X00_EWMA_WEIGHT 8 |
| |
| static inline int rt2x00link_get_avg_rssi(struct ewma *ewma) |
| { |
| unsigned long avg; |
| |
| avg = ewma_read(ewma); |
| if (avg) |
| return -avg; |
| |
| return DEFAULT_RSSI; |
| } |
| |
| static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| |
| if (rt2x00dev->link.qual.rx_success) |
| return rt2x00link_get_avg_rssi(&ant->rssi_ant); |
| |
| return DEFAULT_RSSI; |
| } |
| |
| static int rt2x00link_antenna_get_rssi_history(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| |
| if (ant->rssi_history) |
| return ant->rssi_history; |
| return DEFAULT_RSSI; |
| } |
| |
| static void rt2x00link_antenna_update_rssi_history(struct rt2x00_dev *rt2x00dev, |
| int rssi) |
| { |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| ant->rssi_history = rssi; |
| } |
| |
| static void rt2x00link_antenna_reset(struct rt2x00_dev *rt2x00dev) |
| { |
| ewma_init(&rt2x00dev->link.ant.rssi_ant, RT2X00_EWMA_FACTOR, |
| RT2X00_EWMA_WEIGHT); |
| } |
| |
| static void rt2x00lib_antenna_diversity_sample(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| struct antenna_setup new_ant; |
| int other_antenna; |
| |
| int sample_current = rt2x00link_antenna_get_link_rssi(rt2x00dev); |
| int sample_other = rt2x00link_antenna_get_rssi_history(rt2x00dev); |
| |
| memcpy(&new_ant, &ant->active, sizeof(new_ant)); |
| |
| /* |
| * We are done sampling. Now we should evaluate the results. |
| */ |
| ant->flags &= ~ANTENNA_MODE_SAMPLE; |
| |
| /* |
| * During the last period we have sampled the RSSI |
| * from both antennas. It now is time to determine |
| * which antenna demonstrated the best performance. |
| * When we are already on the antenna with the best |
| * performance, just create a good starting point |
| * for the history and we are done. |
| */ |
| if (sample_current >= sample_other) { |
| rt2x00link_antenna_update_rssi_history(rt2x00dev, |
| sample_current); |
| return; |
| } |
| |
| other_antenna = (ant->active.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; |
| |
| if (ant->flags & ANTENNA_RX_DIVERSITY) |
| new_ant.rx = other_antenna; |
| |
| if (ant->flags & ANTENNA_TX_DIVERSITY) |
| new_ant.tx = other_antenna; |
| |
| rt2x00lib_config_antenna(rt2x00dev, new_ant); |
| } |
| |
| static void rt2x00lib_antenna_diversity_eval(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| struct antenna_setup new_ant; |
| int rssi_curr; |
| int rssi_old; |
| |
| memcpy(&new_ant, &ant->active, sizeof(new_ant)); |
| |
| /* |
| * Get current RSSI value along with the historical value, |
| * after that update the history with the current value. |
| */ |
| rssi_curr = rt2x00link_antenna_get_link_rssi(rt2x00dev); |
| rssi_old = rt2x00link_antenna_get_rssi_history(rt2x00dev); |
| rt2x00link_antenna_update_rssi_history(rt2x00dev, rssi_curr); |
| |
| /* |
| * Legacy driver indicates that we should swap antenna's |
| * when the difference in RSSI is greater that 5. This |
| * also should be done when the RSSI was actually better |
| * then the previous sample. |
| * When the difference exceeds the threshold we should |
| * sample the rssi from the other antenna to make a valid |
| * comparison between the 2 antennas. |
| */ |
| if (abs(rssi_curr - rssi_old) < 5) |
| return; |
| |
| ant->flags |= ANTENNA_MODE_SAMPLE; |
| |
| if (ant->flags & ANTENNA_RX_DIVERSITY) |
| new_ant.rx = (new_ant.rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; |
| |
| if (ant->flags & ANTENNA_TX_DIVERSITY) |
| new_ant.tx = (new_ant.tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A; |
| |
| rt2x00lib_config_antenna(rt2x00dev, new_ant); |
| } |
| |
| static bool rt2x00lib_antenna_diversity(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| |
| /* |
| * Determine if software diversity is enabled for |
| * either the TX or RX antenna (or both). |
| */ |
| if (!(ant->flags & ANTENNA_RX_DIVERSITY) && |
| !(ant->flags & ANTENNA_TX_DIVERSITY)) { |
| ant->flags = 0; |
| return true; |
| } |
| |
| /* |
| * If we have only sampled the data over the last period |
| * we should now harvest the data. Otherwise just evaluate |
| * the data. The latter should only be performed once |
| * every 2 seconds. |
| */ |
| if (ant->flags & ANTENNA_MODE_SAMPLE) { |
| rt2x00lib_antenna_diversity_sample(rt2x00dev); |
| return true; |
| } else if (rt2x00dev->link.count & 1) { |
| rt2x00lib_antenna_diversity_eval(rt2x00dev); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev, |
| struct sk_buff *skb, |
| struct rxdone_entry_desc *rxdesc) |
| { |
| struct link *link = &rt2x00dev->link; |
| struct link_qual *qual = &rt2x00dev->link.qual; |
| struct link_ant *ant = &rt2x00dev->link.ant; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; |
| |
| /* |
| * No need to update the stats for !=STA interfaces |
| */ |
| if (!rt2x00dev->intf_sta_count) |
| return; |
| |
| /* |
| * Frame was received successfully since non-succesfull |
| * frames would have been dropped by the hardware. |
| */ |
| qual->rx_success++; |
| |
| /* |
| * We are only interested in quality statistics from |
| * beacons which came from the BSS which we are |
| * associated with. |
| */ |
| if (!ieee80211_is_beacon(hdr->frame_control) || |
| !(rxdesc->dev_flags & RXDONE_MY_BSS)) |
| return; |
| |
| /* |
| * Update global RSSI |
| */ |
| ewma_add(&link->avg_rssi, -rxdesc->rssi); |
| |
| /* |
| * Update antenna RSSI |
| */ |
| ewma_add(&ant->rssi_ant, -rxdesc->rssi); |
| } |
| |
| void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link *link = &rt2x00dev->link; |
| |
| /* |
| * Link tuning should only be performed when |
| * an active sta interface exists. AP interfaces |
| * don't need link tuning and monitor mode interfaces |
| * should never have to work with link tuners. |
| */ |
| if (!rt2x00dev->intf_sta_count) |
| return; |
| |
| /** |
| * While scanning, link tuning is disabled. By default |
| * the most sensitive settings will be used to make sure |
| * that all beacons and probe responses will be received |
| * during the scan. |
| */ |
| if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) |
| return; |
| |
| rt2x00link_reset_tuner(rt2x00dev, false); |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->work, LINK_TUNE_INTERVAL); |
| } |
| |
| void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) |
| { |
| cancel_delayed_work_sync(&rt2x00dev->link.work); |
| } |
| |
| void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna) |
| { |
| struct link_qual *qual = &rt2x00dev->link.qual; |
| u8 vgc_level = qual->vgc_level_reg; |
| |
| if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) |
| return; |
| |
| /* |
| * Reset link information. |
| * Both the currently active vgc level as well as |
| * the link tuner counter should be reset. Resetting |
| * the counter is important for devices where the |
| * device should only perform link tuning during the |
| * first minute after being enabled. |
| */ |
| rt2x00dev->link.count = 0; |
| memset(qual, 0, sizeof(*qual)); |
| ewma_init(&rt2x00dev->link.avg_rssi, RT2X00_EWMA_FACTOR, |
| RT2X00_EWMA_WEIGHT); |
| |
| /* |
| * Restore the VGC level as stored in the registers, |
| * the driver can use this to determine if the register |
| * must be updated during reset or not. |
| */ |
| qual->vgc_level_reg = vgc_level; |
| |
| /* |
| * Reset the link tuner. |
| */ |
| rt2x00dev->ops->lib->reset_tuner(rt2x00dev, qual); |
| |
| if (antenna) |
| rt2x00link_antenna_reset(rt2x00dev); |
| } |
| |
| static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link_qual *qual = &rt2x00dev->link.qual; |
| |
| qual->rx_success = 0; |
| qual->rx_failed = 0; |
| qual->tx_success = 0; |
| qual->tx_failed = 0; |
| } |
| |
| static void rt2x00link_tuner(struct work_struct *work) |
| { |
| struct rt2x00_dev *rt2x00dev = |
| container_of(work, struct rt2x00_dev, link.work.work); |
| struct link *link = &rt2x00dev->link; |
| struct link_qual *qual = &rt2x00dev->link.qual; |
| |
| /* |
| * When the radio is shutting down we should |
| * immediately cease all link tuning. |
| */ |
| if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) || |
| test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) |
| return; |
| |
| /* |
| * Update statistics. |
| */ |
| rt2x00dev->ops->lib->link_stats(rt2x00dev, qual); |
| rt2x00dev->low_level_stats.dot11FCSErrorCount += qual->rx_failed; |
| |
| /* |
| * Update quality RSSI for link tuning, |
| * when we have received some frames and we managed to |
| * collect the RSSI data we could use this. Otherwise we |
| * must fallback to the default RSSI value. |
| */ |
| if (!qual->rx_success) |
| qual->rssi = DEFAULT_RSSI; |
| else |
| qual->rssi = rt2x00link_get_avg_rssi(&link->avg_rssi); |
| |
| /* |
| * Check if link tuning is supported by the hardware, some hardware |
| * do not support link tuning at all, while other devices can disable |
| * the feature from the EEPROM. |
| */ |
| if (rt2x00_has_cap_link_tuning(rt2x00dev)) |
| rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count); |
| |
| /* |
| * Send a signal to the led to update the led signal strength. |
| */ |
| rt2x00leds_led_quality(rt2x00dev, qual->rssi); |
| |
| /* |
| * Evaluate antenna setup, make this the last step when |
| * rt2x00lib_antenna_diversity made changes the quality |
| * statistics will be reset. |
| */ |
| if (rt2x00lib_antenna_diversity(rt2x00dev)) |
| rt2x00link_reset_qual(rt2x00dev); |
| |
| /* |
| * Increase tuner counter, and reschedule the next link tuner run. |
| */ |
| link->count++; |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->work, LINK_TUNE_INTERVAL); |
| } |
| |
| void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link *link = &rt2x00dev->link; |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && |
| rt2x00dev->ops->lib->watchdog) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->watchdog_work, |
| WATCHDOG_INTERVAL); |
| } |
| |
| void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev) |
| { |
| cancel_delayed_work_sync(&rt2x00dev->link.watchdog_work); |
| } |
| |
| static void rt2x00link_watchdog(struct work_struct *work) |
| { |
| struct rt2x00_dev *rt2x00dev = |
| container_of(work, struct rt2x00_dev, link.watchdog_work.work); |
| struct link *link = &rt2x00dev->link; |
| |
| /* |
| * When the radio is shutting down we should |
| * immediately cease the watchdog monitoring. |
| */ |
| if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) |
| return; |
| |
| rt2x00dev->ops->lib->watchdog(rt2x00dev); |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->watchdog_work, |
| WATCHDOG_INTERVAL); |
| } |
| |
| void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link *link = &rt2x00dev->link; |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && |
| rt2x00dev->ops->lib->gain_calibration) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->agc_work, |
| AGC_INTERVAL); |
| } |
| |
| void rt2x00link_start_vcocal(struct rt2x00_dev *rt2x00dev) |
| { |
| struct link *link = &rt2x00dev->link; |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && |
| rt2x00dev->ops->lib->vco_calibration) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->vco_work, |
| VCO_INTERVAL); |
| } |
| |
| void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev) |
| { |
| cancel_delayed_work_sync(&rt2x00dev->link.agc_work); |
| } |
| |
| void rt2x00link_stop_vcocal(struct rt2x00_dev *rt2x00dev) |
| { |
| cancel_delayed_work_sync(&rt2x00dev->link.vco_work); |
| } |
| |
| static void rt2x00link_agc(struct work_struct *work) |
| { |
| struct rt2x00_dev *rt2x00dev = |
| container_of(work, struct rt2x00_dev, link.agc_work.work); |
| struct link *link = &rt2x00dev->link; |
| |
| /* |
| * When the radio is shutting down we should |
| * immediately cease the watchdog monitoring. |
| */ |
| if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) |
| return; |
| |
| rt2x00dev->ops->lib->gain_calibration(rt2x00dev); |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->agc_work, |
| AGC_INTERVAL); |
| } |
| |
| static void rt2x00link_vcocal(struct work_struct *work) |
| { |
| struct rt2x00_dev *rt2x00dev = |
| container_of(work, struct rt2x00_dev, link.vco_work.work); |
| struct link *link = &rt2x00dev->link; |
| |
| /* |
| * When the radio is shutting down we should |
| * immediately cease the VCO calibration. |
| */ |
| if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) |
| return; |
| |
| rt2x00dev->ops->lib->vco_calibration(rt2x00dev); |
| |
| if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) |
| ieee80211_queue_delayed_work(rt2x00dev->hw, |
| &link->vco_work, |
| VCO_INTERVAL); |
| } |
| |
| void rt2x00link_register(struct rt2x00_dev *rt2x00dev) |
| { |
| INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc); |
| if (rt2x00_has_cap_vco_recalibration(rt2x00dev)) |
| INIT_DELAYED_WORK(&rt2x00dev->link.vco_work, rt2x00link_vcocal); |
| INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog); |
| INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner); |
| } |