drivers/mtd/nand/gpmi-nand/gpmi-nand.h - kernel/msm-4.9 - Gitiles

 /*
  * Freescale GPMI NAND Flash Driver
  *
  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
 #ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
 #define __DRIVERS_MTD_NAND_GPMI_NAND_H

 #include <linux/mtd/nand.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>

 #define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
 struct resources {
 	void __iomem  *gpmi_regs;
 	void __iomem  *bch_regs;
 	unsigned int  dma_low_channel;
 	unsigned int  dma_high_channel;
 	struct clk    *clock[GPMI_CLK_MAX];
 };

 /**
  * struct bch_geometry - BCH geometry description.
  * @gf_len:                   The length of Galois Field. (e.g., 13 or 14)
  * @ecc_strength:             A number that describes the strength of the ECC
  *                            algorithm.
  * @page_size:                The size, in bytes, of a physical page, including
  *                            both data and OOB.
  * @metadata_size:            The size, in bytes, of the metadata.
  * @ecc_chunk_size:           The size, in bytes, of a single ECC chunk. Note
  *                            the first chunk in the page includes both data and
  *                            metadata, so it's a bit larger than this value.
  * @ecc_chunk_count:          The number of ECC chunks in the page,
  * @payload_size:             The size, in bytes, of the payload buffer.
  * @auxiliary_size:           The size, in bytes, of the auxiliary buffer.
  * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
  *                            the ECC status appears.
  * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
  *                            which the underlying physical block mark appears.
  * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
  *                            which the underlying physical block mark appears.
  */
 struct bch_geometry {
 	unsigned int  gf_len;
 	unsigned int  ecc_strength;
 	unsigned int  page_size;
 	unsigned int  metadata_size;
 	unsigned int  ecc_chunk_size;
 	unsigned int  ecc_chunk_count;
 	unsigned int  payload_size;
 	unsigned int  auxiliary_size;
 	unsigned int  auxiliary_status_offset;
 	unsigned int  block_mark_byte_offset;
 	unsigned int  block_mark_bit_offset;
 };

 /**
  * struct boot_rom_geometry - Boot ROM geometry description.
  * @stride_size_in_pages:        The size of a boot block stride, in pages.
  * @search_area_stride_exponent: The logarithm to base 2 of the size of a
  *                               search area in boot block strides.
  */
 struct boot_rom_geometry {
 	unsigned int  stride_size_in_pages;
 	unsigned int  search_area_stride_exponent;
 };

 /* DMA operations types */
 enum dma_ops_type {
 	DMA_FOR_COMMAND = 1,
 	DMA_FOR_READ_DATA,
 	DMA_FOR_WRITE_DATA,
 	DMA_FOR_READ_ECC_PAGE,
 	DMA_FOR_WRITE_ECC_PAGE
 };

 /**
  * struct nand_timing - Fundamental timing attributes for NAND.
  * @data_setup_in_ns:         The data setup time, in nanoseconds. Usually the
  *                            maximum of tDS and tWP. A negative value
  *                            indicates this characteristic isn't known.
  * @data_hold_in_ns:          The data hold time, in nanoseconds. Usually the
  *                            maximum of tDH, tWH and tREH. A negative value
  *                            indicates this characteristic isn't known.
  * @address_setup_in_ns:      The address setup time, in nanoseconds. Usually
  *                            the maximum of tCLS, tCS and tALS. A negative
  *                            value indicates this characteristic isn't known.
  * @gpmi_sample_delay_in_ns:  A GPMI-specific timing parameter. A negative value
  *                            indicates this characteristic isn't known.
  * @tREA_in_ns:               tREA, in nanoseconds, from the data sheet. A
  *                            negative value indicates this characteristic isn't
  *                            known.
  * @tRLOH_in_ns:              tRLOH, in nanoseconds, from the data sheet. A
  *                            negative value indicates this characteristic isn't
  *                            known.
  * @tRHOH_in_ns:              tRHOH, in nanoseconds, from the data sheet. A
  *                            negative value indicates this characteristic isn't
  *                            known.
  */
 struct nand_timing {
 	int8_t  data_setup_in_ns;
 	int8_t  data_hold_in_ns;
 	int8_t  address_setup_in_ns;
 	int8_t  gpmi_sample_delay_in_ns;
 	int8_t  tREA_in_ns;
 	int8_t  tRLOH_in_ns;
 	int8_t  tRHOH_in_ns;
 };

 enum gpmi_type {
 	IS_MX23,
 	IS_MX28,
 	IS_MX6Q,
 	IS_MX6SX
 };

 struct gpmi_devdata {
 	enum gpmi_type type;
 	int bch_max_ecc_strength;
 	int max_chain_delay; /* See the async EDO mode */
 };

 struct gpmi_nand_data {
 	/* flags */
 #define GPMI_ASYNC_EDO_ENABLED	(1 << 0)
 #define GPMI_TIMING_INIT_OK	(1 << 1)
 	int			flags;
 	const struct gpmi_devdata *devdata;

 	/* System Interface */
 	struct device		*dev;
 	struct platform_device	*pdev;

 	/* Resources */
 	struct resources	resources;

 	/* Flash Hardware */
 	struct nand_timing	timing;
 	int			timing_mode;

 	/* BCH */
 	struct bch_geometry	bch_geometry;
 	struct completion	bch_done;

 	/* NAND Boot issue */
 	bool			swap_block_mark;
 	struct boot_rom_geometry rom_geometry;

 	/* MTD / NAND */
 	struct nand_chip	nand;
 	struct mtd_info		mtd;

 	/* General-use Variables */
 	int			current_chip;
 	unsigned int		command_length;

 	/* passed from upper layer */
 	uint8_t			*upper_buf;
 	int			upper_len;

 	/* for DMA operations */
 	bool			direct_dma_map_ok;

 	struct scatterlist	cmd_sgl;
 	char			*cmd_buffer;

 	struct scatterlist	data_sgl;
 	char			*data_buffer_dma;

 	void			*page_buffer_virt;
 	dma_addr_t		page_buffer_phys;
 	unsigned int		page_buffer_size;

 	void			*payload_virt;
 	dma_addr_t		payload_phys;

 	void			*auxiliary_virt;
 	dma_addr_t		auxiliary_phys;

 	/* DMA channels */
 #define DMA_CHANS		8
 	struct dma_chan		*dma_chans[DMA_CHANS];
 	enum dma_ops_type	last_dma_type;
 	enum dma_ops_type	dma_type;
 	struct completion	dma_done;

 	/* private */
 	void			*private;
 };

 /**
  * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
  * @data_setup_in_cycles:      The data setup time, in cycles.
  * @data_hold_in_cycles:       The data hold time, in cycles.
  * @address_setup_in_cycles:   The address setup time, in cycles.
  * @device_busy_timeout:       The timeout waiting for NAND Ready/Busy,
  *                             this value is the number of cycles multiplied
  *                             by 4096.
  * @use_half_periods:          Indicates the clock is running slowly, so the
  *                             NFC DLL should use half-periods.
  * @sample_delay_factor:       The sample delay factor.
  * @wrn_dly_sel:               The delay on the GPMI write strobe.
  */
 struct gpmi_nfc_hardware_timing {
 	/* for HW_GPMI_TIMING0 */
 	uint8_t  data_setup_in_cycles;
 	uint8_t  data_hold_in_cycles;
 	uint8_t  address_setup_in_cycles;

 	/* for HW_GPMI_TIMING1 */
 	uint16_t device_busy_timeout;
 #define GPMI_DEFAULT_BUSY_TIMEOUT	0x500 /* default busy timeout value.*/

 	/* for HW_GPMI_CTRL1 */
 	bool     use_half_periods;
 	uint8_t  sample_delay_factor;
 	uint8_t  wrn_dly_sel;
 };

 /**
  * struct timing_threshod - Timing threshold
  * @max_data_setup_cycles:       The maximum number of data setup cycles that
  *                               can be expressed in the hardware.
  * @internal_data_setup_in_ns:   The time, in ns, that the NFC hardware requires
  *                               for data read internal setup. In the Reference
  *                               Manual, see the chapter "High-Speed NAND
  *                               Timing" for more details.
  * @max_sample_delay_factor:     The maximum sample delay factor that can be
  *                               expressed in the hardware.
  * @max_dll_clock_period_in_ns:  The maximum period of the GPMI clock that the
  *                               sample delay DLL hardware can possibly work
  *                               with (the DLL is unusable with longer periods).
  *                               If the full-cycle period is greater than HALF
  *                               this value, the DLL must be configured to use
  *                               half-periods.
  * @max_dll_delay_in_ns:         The maximum amount of delay, in ns, that the
  *                               DLL can implement.
  * @clock_frequency_in_hz:       The clock frequency, in Hz, during the current
  *                               I/O transaction. If no I/O transaction is in
  *                               progress, this is the clock frequency during
  *                               the most recent I/O transaction.
  */
 struct timing_threshod {
 	const unsigned int      max_chip_count;
 	const unsigned int      max_data_setup_cycles;
 	const unsigned int      internal_data_setup_in_ns;
 	const unsigned int      max_sample_delay_factor;
 	const unsigned int      max_dll_clock_period_in_ns;
 	const unsigned int      max_dll_delay_in_ns;
 	unsigned long           clock_frequency_in_hz;

 };

 /* Common Services */
 extern int common_nfc_set_geometry(struct gpmi_nand_data *);
 extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
 extern void prepare_data_dma(struct gpmi_nand_data *,
 				enum dma_data_direction dr);
 extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
 				struct dma_async_tx_descriptor *);
 extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
 				struct dma_async_tx_descriptor *);

 /* GPMI-NAND helper function library */
 extern int gpmi_init(struct gpmi_nand_data *);
 extern int gpmi_extra_init(struct gpmi_nand_data *);
 extern void gpmi_clear_bch(struct gpmi_nand_data *);
 extern void gpmi_dump_info(struct gpmi_nand_data *);
 extern int bch_set_geometry(struct gpmi_nand_data *);
 extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
 extern int gpmi_send_command(struct gpmi_nand_data *);
 extern void gpmi_begin(struct gpmi_nand_data *);
 extern void gpmi_end(struct gpmi_nand_data *);
 extern int gpmi_read_data(struct gpmi_nand_data *);
 extern int gpmi_send_data(struct gpmi_nand_data *);
 extern int gpmi_send_page(struct gpmi_nand_data *,
 			dma_addr_t payload, dma_addr_t auxiliary);
 extern int gpmi_read_page(struct gpmi_nand_data *,
 			dma_addr_t payload, dma_addr_t auxiliary);

 /* BCH : Status Block Completion Codes */
 #define STATUS_GOOD		0x00
 #define STATUS_ERASED		0xff
 #define STATUS_UNCORRECTABLE	0xfe

 /* Use the devdata to distinguish different Archs. */
 #define GPMI_IS_MX23(x)		((x)->devdata->type == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->devdata->type == IS_MX28)
 #define GPMI_IS_MX6Q(x)		((x)->devdata->type == IS_MX6Q)
 #define GPMI_IS_MX6SX(x)	((x)->devdata->type == IS_MX6SX)

 #define GPMI_IS_MX6(x)		(GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
 #endif
	/*
	* Freescale GPMI NAND Flash Driver
	*
	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	* Copyright (C) 2008 Embedded Alley Solutions, Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/
	#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
	#define __DRIVERS_MTD_NAND_GPMI_NAND_H

	#include <linux/mtd/nand.h>
	#include <linux/platform_device.h>
	#include <linux/dma-mapping.h>
	#include <linux/dmaengine.h>

	#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
	struct resources {
	void __iomem *gpmi_regs;
	void __iomem *bch_regs;
	unsigned int dma_low_channel;
	unsigned int dma_high_channel;
	struct clk *clock[GPMI_CLK_MAX];
	};

	/**
	* struct bch_geometry - BCH geometry description.
	* @gf_len: The length of Galois Field. (e.g., 13 or 14)
	* @ecc_strength: A number that describes the strength of the ECC
	* algorithm.
	* @page_size: The size, in bytes, of a physical page, including
	* both data and OOB.
	* @metadata_size: The size, in bytes, of the metadata.
	* @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
	* the first chunk in the page includes both data and
	* metadata, so it's a bit larger than this value.
	* @ecc_chunk_count: The number of ECC chunks in the page,
	* @payload_size: The size, in bytes, of the payload buffer.
	* @auxiliary_size: The size, in bytes, of the auxiliary buffer.
	* @auxiliary_status_offset: The offset into the auxiliary buffer at which
	* the ECC status appears.
	* @block_mark_byte_offset: The byte offset in the ECC-based page view at
	* which the underlying physical block mark appears.
	* @block_mark_bit_offset: The bit offset into the ECC-based page view at
	* which the underlying physical block mark appears.
	*/
	struct bch_geometry {
	unsigned int gf_len;
	unsigned int ecc_strength;
	unsigned int page_size;
	unsigned int metadata_size;
	unsigned int ecc_chunk_size;
	unsigned int ecc_chunk_count;
	unsigned int payload_size;
	unsigned int auxiliary_size;
	unsigned int auxiliary_status_offset;
	unsigned int block_mark_byte_offset;
	unsigned int block_mark_bit_offset;
	};

	/**
	* struct boot_rom_geometry - Boot ROM geometry description.
	* @stride_size_in_pages: The size of a boot block stride, in pages.
	* @search_area_stride_exponent: The logarithm to base 2 of the size of a
	* search area in boot block strides.
	*/
	struct boot_rom_geometry {
	unsigned int stride_size_in_pages;
	unsigned int search_area_stride_exponent;
	};

	/* DMA operations types */
	enum dma_ops_type {
	DMA_FOR_COMMAND = 1,
	DMA_FOR_READ_DATA,
	DMA_FOR_WRITE_DATA,
	DMA_FOR_READ_ECC_PAGE,
	DMA_FOR_WRITE_ECC_PAGE
	};

	/**
	* struct nand_timing - Fundamental timing attributes for NAND.
	* @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
	* maximum of tDS and tWP. A negative value
	* indicates this characteristic isn't known.
	* @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
	* maximum of tDH, tWH and tREH. A negative value
	* indicates this characteristic isn't known.
	* @address_setup_in_ns: The address setup time, in nanoseconds. Usually
	* the maximum of tCLS, tCS and tALS. A negative
	* value indicates this characteristic isn't known.
	* @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
	* indicates this characteristic isn't known.
	* @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
	* negative value indicates this characteristic isn't
	* known.
	* @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
	* negative value indicates this characteristic isn't
	* known.
	* @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
	* negative value indicates this characteristic isn't
	* known.
	*/
	struct nand_timing {
	int8_t data_setup_in_ns;
	int8_t data_hold_in_ns;
	int8_t address_setup_in_ns;
	int8_t gpmi_sample_delay_in_ns;
	int8_t tREA_in_ns;
	int8_t tRLOH_in_ns;
	int8_t tRHOH_in_ns;
	};

	enum gpmi_type {
	IS_MX23,
	IS_MX28,
	IS_MX6Q,
	IS_MX6SX
	};

	struct gpmi_devdata {
	enum gpmi_type type;
	int bch_max_ecc_strength;
	int max_chain_delay; /* See the async EDO mode */
	};

	struct gpmi_nand_data {
	/* flags */
	#define GPMI_ASYNC_EDO_ENABLED (1 << 0)
	#define GPMI_TIMING_INIT_OK (1 << 1)
	int flags;
	const struct gpmi_devdata *devdata;

	/* System Interface */
	struct device *dev;
	struct platform_device *pdev;

	/* Resources */
	struct resources resources;

	/* Flash Hardware */
	struct nand_timing timing;
	int timing_mode;

	/* BCH */
	struct bch_geometry bch_geometry;
	struct completion bch_done;

	/* NAND Boot issue */
	bool swap_block_mark;
	struct boot_rom_geometry rom_geometry;

	/* MTD / NAND */
	struct nand_chip nand;
	struct mtd_info mtd;

	/* General-use Variables */
	int current_chip;
	unsigned int command_length;

	/* passed from upper layer */
	uint8_t *upper_buf;
	int upper_len;

	/* for DMA operations */
	bool direct_dma_map_ok;

	struct scatterlist cmd_sgl;
	char *cmd_buffer;

	struct scatterlist data_sgl;
	char *data_buffer_dma;

	void *page_buffer_virt;
	dma_addr_t page_buffer_phys;
	unsigned int page_buffer_size;

	void *payload_virt;
	dma_addr_t payload_phys;

	void *auxiliary_virt;
	dma_addr_t auxiliary_phys;

	/* DMA channels */
	#define DMA_CHANS 8
	struct dma_chan *dma_chans[DMA_CHANS];
	enum dma_ops_type last_dma_type;
	enum dma_ops_type dma_type;
	struct completion dma_done;

	/* private */
	void *private;
	};

	/**
	* struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
	* @data_setup_in_cycles: The data setup time, in cycles.
	* @data_hold_in_cycles: The data hold time, in cycles.
	* @address_setup_in_cycles: The address setup time, in cycles.
	* @device_busy_timeout: The timeout waiting for NAND Ready/Busy,
	* this value is the number of cycles multiplied
	* by 4096.
	* @use_half_periods: Indicates the clock is running slowly, so the
	* NFC DLL should use half-periods.
	* @sample_delay_factor: The sample delay factor.
	* @wrn_dly_sel: The delay on the GPMI write strobe.
	*/
	struct gpmi_nfc_hardware_timing {
	/* for HW_GPMI_TIMING0 */
	uint8_t data_setup_in_cycles;
	uint8_t data_hold_in_cycles;
	uint8_t address_setup_in_cycles;

	/* for HW_GPMI_TIMING1 */
	uint16_t device_busy_timeout;
	#define GPMI_DEFAULT_BUSY_TIMEOUT 0x500 /* default busy timeout value.*/

	/* for HW_GPMI_CTRL1 */
	bool use_half_periods;
	uint8_t sample_delay_factor;
	uint8_t wrn_dly_sel;
	};

	/**
	* struct timing_threshod - Timing threshold
	* @max_data_setup_cycles: The maximum number of data setup cycles that
	* can be expressed in the hardware.
	* @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
	* for data read internal setup. In the Reference
	* Manual, see the chapter "High-Speed NAND
	* Timing" for more details.
	* @max_sample_delay_factor: The maximum sample delay factor that can be
	* expressed in the hardware.
	* @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
	* sample delay DLL hardware can possibly work
	* with (the DLL is unusable with longer periods).
	* If the full-cycle period is greater than HALF
	* this value, the DLL must be configured to use
	* half-periods.
	* @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
	* DLL can implement.
	* @clock_frequency_in_hz: The clock frequency, in Hz, during the current
	* I/O transaction. If no I/O transaction is in
	* progress, this is the clock frequency during
	* the most recent I/O transaction.
	*/
	struct timing_threshod {
	const unsigned int max_chip_count;
	const unsigned int max_data_setup_cycles;
	const unsigned int internal_data_setup_in_ns;
	const unsigned int max_sample_delay_factor;
	const unsigned int max_dll_clock_period_in_ns;
	const unsigned int max_dll_delay_in_ns;
	unsigned long clock_frequency_in_hz;

	};

	/* Common Services */
	extern int common_nfc_set_geometry(struct gpmi_nand_data *);
	extern struct dma_chan get_dma_chan(struct gpmi_nand_data );
	extern void prepare_data_dma(struct gpmi_nand_data *,
	enum dma_data_direction dr);
	extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
	struct dma_async_tx_descriptor *);
	extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
	struct dma_async_tx_descriptor *);

	/* GPMI-NAND helper function library */
	extern int gpmi_init(struct gpmi_nand_data *);
	extern int gpmi_extra_init(struct gpmi_nand_data *);
	extern void gpmi_clear_bch(struct gpmi_nand_data *);
	extern void gpmi_dump_info(struct gpmi_nand_data *);
	extern int bch_set_geometry(struct gpmi_nand_data *);
	extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
	extern int gpmi_send_command(struct gpmi_nand_data *);
	extern void gpmi_begin(struct gpmi_nand_data *);
	extern void gpmi_end(struct gpmi_nand_data *);
	extern int gpmi_read_data(struct gpmi_nand_data *);
	extern int gpmi_send_data(struct gpmi_nand_data *);
	extern int gpmi_send_page(struct gpmi_nand_data *,
	dma_addr_t payload, dma_addr_t auxiliary);
	extern int gpmi_read_page(struct gpmi_nand_data *,
	dma_addr_t payload, dma_addr_t auxiliary);

	/* BCH : Status Block Completion Codes */
	#define STATUS_GOOD 0x00
	#define STATUS_ERASED 0xff
	#define STATUS_UNCORRECTABLE 0xfe

	/* Use the devdata to distinguish different Archs. */
	#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
	#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
	#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
	#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)

	#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) \|\| GPMI_IS_MX6SX(x))
	#endif