| /* |
| * MUSB OTG driver defines |
| * |
| * Copyright 2005 Mentor Graphics Corporation |
| * Copyright (C) 2005-2006 by Texas Instruments |
| * Copyright (C) 2006-2007 Nokia Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN |
| * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #ifndef __MUSB_CORE_H__ |
| #define __MUSB_CORE_H__ |
| |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/errno.h> |
| #include <linux/timer.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/musb.h> |
| |
| struct musb; |
| struct musb_hw_ep; |
| struct musb_ep; |
| |
| /* Helper defines for struct musb->hwvers */ |
| #define MUSB_HWVERS_MAJOR(x) ((x >> 10) & 0x1f) |
| #define MUSB_HWVERS_MINOR(x) (x & 0x3ff) |
| #define MUSB_HWVERS_RC 0x8000 |
| #define MUSB_HWVERS_1300 0x52C |
| #define MUSB_HWVERS_1400 0x590 |
| #define MUSB_HWVERS_1800 0x720 |
| #define MUSB_HWVERS_1900 0x784 |
| #define MUSB_HWVERS_2000 0x800 |
| |
| #include "musb_debug.h" |
| #include "musb_dma.h" |
| |
| #include "musb_io.h" |
| #include "musb_regs.h" |
| |
| #include "musb_gadget.h" |
| #include <linux/usb/hcd.h> |
| #include "musb_host.h" |
| |
| |
| |
| #ifdef CONFIG_USB_MUSB_OTG |
| |
| #define is_peripheral_enabled(musb) ((musb)->board_mode != MUSB_HOST) |
| #define is_host_enabled(musb) ((musb)->board_mode != MUSB_PERIPHERAL) |
| #define is_otg_enabled(musb) ((musb)->board_mode == MUSB_OTG) |
| |
| /* NOTE: otg and peripheral-only state machines start at B_IDLE. |
| * OTG or host-only go to A_IDLE when ID is sensed. |
| */ |
| #define is_peripheral_active(m) (!(m)->is_host) |
| #define is_host_active(m) ((m)->is_host) |
| |
| #else |
| #define is_peripheral_enabled(musb) is_peripheral_capable() |
| #define is_host_enabled(musb) is_host_capable() |
| #define is_otg_enabled(musb) 0 |
| |
| #define is_peripheral_active(musb) is_peripheral_capable() |
| #define is_host_active(musb) is_host_capable() |
| #endif |
| |
| #if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL) |
| /* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always |
| * override that choice selection (often USB_GADGET_DUMMY_HCD). |
| */ |
| #ifndef CONFIG_USB_GADGET_MUSB_HDRC |
| #error bogus Kconfig output ... select CONFIG_USB_GADGET_MUSB_HDRC |
| #endif |
| #endif /* need MUSB gadget selection */ |
| |
| #ifndef CONFIG_HAVE_CLK |
| /* Dummy stub for clk framework */ |
| #define clk_get(dev, id) NULL |
| #define clk_put(clock) do {} while (0) |
| #define clk_enable(clock) do {} while (0) |
| #define clk_disable(clock) do {} while (0) |
| #endif |
| |
| #ifdef CONFIG_PROC_FS |
| #include <linux/fs.h> |
| #define MUSB_CONFIG_PROC_FS |
| #endif |
| |
| /****************************** PERIPHERAL ROLE *****************************/ |
| |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| |
| #define is_peripheral_capable() (1) |
| |
| extern irqreturn_t musb_g_ep0_irq(struct musb *); |
| extern void musb_g_tx(struct musb *, u8); |
| extern void musb_g_rx(struct musb *, u8); |
| extern void musb_g_reset(struct musb *); |
| extern void musb_g_suspend(struct musb *); |
| extern void musb_g_resume(struct musb *); |
| extern void musb_g_wakeup(struct musb *); |
| extern void musb_g_disconnect(struct musb *); |
| |
| #else |
| |
| #define is_peripheral_capable() (0) |
| |
| static inline irqreturn_t musb_g_ep0_irq(struct musb *m) { return IRQ_NONE; } |
| static inline void musb_g_reset(struct musb *m) {} |
| static inline void musb_g_suspend(struct musb *m) {} |
| static inline void musb_g_resume(struct musb *m) {} |
| static inline void musb_g_wakeup(struct musb *m) {} |
| static inline void musb_g_disconnect(struct musb *m) {} |
| |
| #endif |
| |
| /****************************** HOST ROLE ***********************************/ |
| |
| #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| |
| #define is_host_capable() (1) |
| |
| extern irqreturn_t musb_h_ep0_irq(struct musb *); |
| extern void musb_host_tx(struct musb *, u8); |
| extern void musb_host_rx(struct musb *, u8); |
| |
| #else |
| |
| #define is_host_capable() (0) |
| |
| static inline irqreturn_t musb_h_ep0_irq(struct musb *m) { return IRQ_NONE; } |
| static inline void musb_host_tx(struct musb *m, u8 e) {} |
| static inline void musb_host_rx(struct musb *m, u8 e) {} |
| |
| #endif |
| |
| |
| /****************************** CONSTANTS ********************************/ |
| |
| #ifndef MUSB_C_NUM_EPS |
| #define MUSB_C_NUM_EPS ((u8)16) |
| #endif |
| |
| #ifndef MUSB_MAX_END0_PACKET |
| #define MUSB_MAX_END0_PACKET ((u16)MUSB_EP0_FIFOSIZE) |
| #endif |
| |
| /* host side ep0 states */ |
| enum musb_h_ep0_state { |
| MUSB_EP0_IDLE, |
| MUSB_EP0_START, /* expect ack of setup */ |
| MUSB_EP0_IN, /* expect IN DATA */ |
| MUSB_EP0_OUT, /* expect ack of OUT DATA */ |
| MUSB_EP0_STATUS, /* expect ack of STATUS */ |
| } __attribute__ ((packed)); |
| |
| /* peripheral side ep0 states */ |
| enum musb_g_ep0_state { |
| MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */ |
| MUSB_EP0_STAGE_SETUP, /* received SETUP */ |
| MUSB_EP0_STAGE_TX, /* IN data */ |
| MUSB_EP0_STAGE_RX, /* OUT data */ |
| MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */ |
| MUSB_EP0_STAGE_STATUSOUT, /* (after IN data) */ |
| MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */ |
| } __attribute__ ((packed)); |
| |
| /* |
| * OTG protocol constants. See USB OTG 1.3 spec, |
| * sections 5.5 "Device Timings" and 6.6.5 "Timers". |
| */ |
| #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */ |
| #define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */ |
| #define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */ |
| #define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */ |
| |
| |
| /*************************** REGISTER ACCESS ********************************/ |
| |
| /* Endpoint registers (other than dynfifo setup) can be accessed either |
| * directly with the "flat" model, or after setting up an index register. |
| */ |
| |
| #if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \ |
| || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN) \ |
| || defined(CONFIG_ARCH_OMAP4) |
| /* REVISIT indexed access seemed to |
| * misbehave (on DaVinci) for at least peripheral IN ... |
| */ |
| #define MUSB_FLAT_REG |
| #endif |
| |
| /* TUSB mapping: "flat" plus ep0 special cases */ |
| #if defined(CONFIG_USB_MUSB_TUSB6010) |
| #define musb_ep_select(_mbase, _epnum) \ |
| musb_writeb((_mbase), MUSB_INDEX, (_epnum)) |
| #define MUSB_EP_OFFSET MUSB_TUSB_OFFSET |
| |
| /* "flat" mapping: each endpoint has its own i/o address */ |
| #elif defined(MUSB_FLAT_REG) |
| #define musb_ep_select(_mbase, _epnum) (((void)(_mbase)), ((void)(_epnum))) |
| #define MUSB_EP_OFFSET MUSB_FLAT_OFFSET |
| |
| /* "indexed" mapping: INDEX register controls register bank select */ |
| #else |
| #define musb_ep_select(_mbase, _epnum) \ |
| musb_writeb((_mbase), MUSB_INDEX, (_epnum)) |
| #define MUSB_EP_OFFSET MUSB_INDEXED_OFFSET |
| #endif |
| |
| /****************************** FUNCTIONS ********************************/ |
| |
| #define MUSB_HST_MODE(_musb)\ |
| { (_musb)->is_host = true; } |
| #define MUSB_DEV_MODE(_musb) \ |
| { (_musb)->is_host = false; } |
| |
| #define test_devctl_hst_mode(_x) \ |
| (musb_readb((_x)->mregs, MUSB_DEVCTL)&MUSB_DEVCTL_HM) |
| |
| #define MUSB_MODE(musb) ((musb)->is_host ? "Host" : "Peripheral") |
| |
| /******************************** TYPES *************************************/ |
| |
| /** |
| * struct musb_platform_ops - Operations passed to musb_core by HW glue layer |
| * @init: turns on clocks, sets up platform-specific registers, etc |
| * @exit: undoes @init |
| * @set_mode: forcefully changes operating mode |
| * @try_ilde: tries to idle the IP |
| * @vbus_status: returns vbus status if possible |
| * @set_vbus: forces vbus status |
| */ |
| struct musb_platform_ops { |
| int (*init)(struct musb *musb); |
| int (*exit)(struct musb *musb); |
| |
| void (*enable)(struct musb *musb); |
| void (*disable)(struct musb *musb); |
| |
| int (*set_mode)(struct musb *musb, u8 mode); |
| void (*try_idle)(struct musb *musb, unsigned long timeout); |
| |
| int (*vbus_status)(struct musb *musb); |
| void (*set_vbus)(struct musb *musb, int on); |
| }; |
| |
| /* |
| * struct musb_hw_ep - endpoint hardware (bidirectional) |
| * |
| * Ordered slightly for better cacheline locality. |
| */ |
| struct musb_hw_ep { |
| struct musb *musb; |
| void __iomem *fifo; |
| void __iomem *regs; |
| |
| #ifdef CONFIG_USB_MUSB_TUSB6010 |
| void __iomem *conf; |
| #endif |
| |
| /* index in musb->endpoints[] */ |
| u8 epnum; |
| |
| /* hardware configuration, possibly dynamic */ |
| bool is_shared_fifo; |
| bool tx_double_buffered; |
| bool rx_double_buffered; |
| u16 max_packet_sz_tx; |
| u16 max_packet_sz_rx; |
| |
| struct dma_channel *tx_channel; |
| struct dma_channel *rx_channel; |
| |
| #ifdef CONFIG_USB_MUSB_TUSB6010 |
| /* TUSB has "asynchronous" and "synchronous" dma modes */ |
| dma_addr_t fifo_async; |
| dma_addr_t fifo_sync; |
| void __iomem *fifo_sync_va; |
| #endif |
| |
| #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| void __iomem *target_regs; |
| |
| /* currently scheduled peripheral endpoint */ |
| struct musb_qh *in_qh; |
| struct musb_qh *out_qh; |
| |
| u8 rx_reinit; |
| u8 tx_reinit; |
| #endif |
| |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| /* peripheral side */ |
| struct musb_ep ep_in; /* TX */ |
| struct musb_ep ep_out; /* RX */ |
| #endif |
| }; |
| |
| static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep) |
| { |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| return next_request(&hw_ep->ep_in); |
| #else |
| return NULL; |
| #endif |
| } |
| |
| static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep) |
| { |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| return next_request(&hw_ep->ep_out); |
| #else |
| return NULL; |
| #endif |
| } |
| |
| struct musb_csr_regs { |
| /* FIFO registers */ |
| u16 txmaxp, txcsr, rxmaxp, rxcsr; |
| u16 rxfifoadd, txfifoadd; |
| u8 txtype, txinterval, rxtype, rxinterval; |
| u8 rxfifosz, txfifosz; |
| u8 txfunaddr, txhubaddr, txhubport; |
| u8 rxfunaddr, rxhubaddr, rxhubport; |
| }; |
| |
| struct musb_context_registers { |
| |
| #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ |
| defined(CONFIG_ARCH_OMAP4) |
| u32 otg_sysconfig, otg_forcestandby; |
| #endif |
| u8 power; |
| u16 intrtxe, intrrxe; |
| u8 intrusbe; |
| u16 frame; |
| u8 index, testmode; |
| |
| u8 devctl, busctl, misc; |
| |
| struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; |
| }; |
| |
| /* |
| * struct musb - Driver instance data. |
| */ |
| struct musb { |
| /* device lock */ |
| spinlock_t lock; |
| |
| const struct musb_platform_ops *ops; |
| struct musb_context_registers context; |
| |
| irqreturn_t (*isr)(int, void *); |
| struct work_struct irq_work; |
| u16 hwvers; |
| |
| /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */ |
| #define MUSB_PORT_STAT_RESUME (1 << 31) |
| |
| u32 port1_status; |
| |
| #ifdef CONFIG_USB_MUSB_HDRC_HCD |
| unsigned long rh_timer; |
| |
| enum musb_h_ep0_state ep0_stage; |
| |
| /* bulk traffic normally dedicates endpoint hardware, and each |
| * direction has its own ring of host side endpoints. |
| * we try to progress the transfer at the head of each endpoint's |
| * queue until it completes or NAKs too much; then we try the next |
| * endpoint. |
| */ |
| struct musb_hw_ep *bulk_ep; |
| |
| struct list_head control; /* of musb_qh */ |
| struct list_head in_bulk; /* of musb_qh */ |
| struct list_head out_bulk; /* of musb_qh */ |
| |
| struct timer_list otg_timer; |
| #endif |
| |
| struct dma_controller *dma_controller; |
| |
| struct device *controller; |
| void __iomem *ctrl_base; |
| void __iomem *mregs; |
| |
| #ifdef CONFIG_USB_MUSB_TUSB6010 |
| dma_addr_t async; |
| dma_addr_t sync; |
| void __iomem *sync_va; |
| #endif |
| |
| /* passed down from chip/board specific irq handlers */ |
| u8 int_usb; |
| u16 int_rx; |
| u16 int_tx; |
| |
| struct otg_transceiver *xceiv; |
| |
| int nIrq; |
| unsigned irq_wake:1; |
| |
| struct musb_hw_ep endpoints[MUSB_C_NUM_EPS]; |
| #define control_ep endpoints |
| |
| #define VBUSERR_RETRY_COUNT 3 |
| u16 vbuserr_retry; |
| u16 epmask; |
| u8 nr_endpoints; |
| |
| u8 board_mode; /* enum musb_mode */ |
| int (*board_set_power)(int state); |
| |
| u8 min_power; /* vbus for periph, in mA/2 */ |
| |
| bool is_host; |
| |
| int a_wait_bcon; /* VBUS timeout in msecs */ |
| unsigned long idle_timeout; /* Next timeout in jiffies */ |
| |
| /* active means connected and not suspended */ |
| unsigned is_active:1; |
| |
| unsigned is_multipoint:1; |
| unsigned ignore_disconnect:1; /* during bus resets */ |
| |
| unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ |
| unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ |
| unsigned dyn_fifo:1; /* dynamic FIFO supported? */ |
| |
| unsigned bulk_split:1; |
| #define can_bulk_split(musb,type) \ |
| (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_split) |
| |
| unsigned bulk_combine:1; |
| #define can_bulk_combine(musb,type) \ |
| (((type) == USB_ENDPOINT_XFER_BULK) && (musb)->bulk_combine) |
| |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| /* is_suspended means USB B_PERIPHERAL suspend */ |
| unsigned is_suspended:1; |
| |
| /* may_wakeup means remote wakeup is enabled */ |
| unsigned may_wakeup:1; |
| |
| /* is_self_powered is reported in device status and the |
| * config descriptor. is_bus_powered means B_PERIPHERAL |
| * draws some VBUS current; both can be true. |
| */ |
| unsigned is_self_powered:1; |
| unsigned is_bus_powered:1; |
| |
| unsigned set_address:1; |
| unsigned test_mode:1; |
| unsigned softconnect:1; |
| |
| u8 address; |
| u8 test_mode_nr; |
| u16 ackpend; /* ep0 */ |
| enum musb_g_ep0_state ep0_state; |
| struct usb_gadget g; /* the gadget */ |
| struct usb_gadget_driver *gadget_driver; /* its driver */ |
| #endif |
| |
| struct musb_hdrc_config *config; |
| |
| #ifdef MUSB_CONFIG_PROC_FS |
| struct proc_dir_entry *proc_entry; |
| #endif |
| }; |
| |
| #ifdef CONFIG_USB_GADGET_MUSB_HDRC |
| static inline struct musb *gadget_to_musb(struct usb_gadget *g) |
| { |
| return container_of(g, struct musb, g); |
| } |
| #endif |
| |
| #ifdef CONFIG_BLACKFIN |
| static inline int musb_read_fifosize(struct musb *musb, |
| struct musb_hw_ep *hw_ep, u8 epnum) |
| { |
| musb->nr_endpoints++; |
| musb->epmask |= (1 << epnum); |
| |
| if (epnum < 5) { |
| hw_ep->max_packet_sz_tx = 128; |
| hw_ep->max_packet_sz_rx = 128; |
| } else { |
| hw_ep->max_packet_sz_tx = 1024; |
| hw_ep->max_packet_sz_rx = 1024; |
| } |
| hw_ep->is_shared_fifo = false; |
| |
| return 0; |
| } |
| |
| static inline void musb_configure_ep0(struct musb *musb) |
| { |
| musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; |
| musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; |
| musb->endpoints[0].is_shared_fifo = true; |
| } |
| |
| #else |
| |
| static inline int musb_read_fifosize(struct musb *musb, |
| struct musb_hw_ep *hw_ep, u8 epnum) |
| { |
| void *mbase = musb->mregs; |
| u8 reg = 0; |
| |
| /* read from core using indexed model */ |
| reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE)); |
| /* 0's returned when no more endpoints */ |
| if (!reg) |
| return -ENODEV; |
| |
| musb->nr_endpoints++; |
| musb->epmask |= (1 << epnum); |
| |
| hw_ep->max_packet_sz_tx = 1 << (reg & 0x0f); |
| |
| /* shared TX/RX FIFO? */ |
| if ((reg & 0xf0) == 0xf0) { |
| hw_ep->max_packet_sz_rx = hw_ep->max_packet_sz_tx; |
| hw_ep->is_shared_fifo = true; |
| return 0; |
| } else { |
| hw_ep->max_packet_sz_rx = 1 << ((reg & 0xf0) >> 4); |
| hw_ep->is_shared_fifo = false; |
| } |
| |
| return 0; |
| } |
| |
| static inline void musb_configure_ep0(struct musb *musb) |
| { |
| musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; |
| musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; |
| musb->endpoints[0].is_shared_fifo = true; |
| } |
| #endif /* CONFIG_BLACKFIN */ |
| |
| |
| /***************************** Glue it together *****************************/ |
| |
| extern const char musb_driver_name[]; |
| |
| extern void musb_start(struct musb *musb); |
| extern void musb_stop(struct musb *musb); |
| |
| extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src); |
| extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst); |
| |
| extern void musb_load_testpacket(struct musb *); |
| |
| extern irqreturn_t musb_interrupt(struct musb *); |
| |
| extern void musb_hnp_stop(struct musb *musb); |
| |
| static inline void musb_platform_set_vbus(struct musb *musb, int is_on) |
| { |
| if (musb->ops->set_vbus) |
| musb->ops->set_vbus(musb, is_on); |
| } |
| |
| static inline void musb_platform_enable(struct musb *musb) |
| { |
| if (musb->ops->enable) |
| musb->ops->enable(musb); |
| } |
| |
| static inline void musb_platform_disable(struct musb *musb) |
| { |
| if (musb->ops->disable) |
| musb->ops->disable(musb); |
| } |
| |
| static inline int musb_platform_set_mode(struct musb *musb, u8 mode) |
| { |
| if (!musb->ops->set_mode) |
| return 0; |
| |
| return musb->ops->set_mode(musb, mode); |
| } |
| |
| static inline void musb_platform_try_idle(struct musb *musb, |
| unsigned long timeout) |
| { |
| if (musb->ops->try_idle) |
| musb->ops->try_idle(musb, timeout); |
| } |
| |
| static inline int musb_platform_get_vbus_status(struct musb *musb) |
| { |
| if (!musb->ops->vbus_status) |
| return 0; |
| |
| return musb->ops->vbus_status(musb); |
| } |
| |
| static inline int musb_platform_init(struct musb *musb) |
| { |
| if (!musb->ops->init) |
| return -EINVAL; |
| |
| return musb->ops->init(musb); |
| } |
| |
| static inline int musb_platform_exit(struct musb *musb) |
| { |
| if (!musb->ops->exit) |
| return -EINVAL; |
| |
| return musb->ops->exit(musb); |
| } |
| |
| #endif /* __MUSB_CORE_H__ */ |